Transport Box - Cashels Engineering

Transport Box
Transport Box
•Time proven design for strength and reliability
•3mm steel for main body construction, 6mm & 8mm elsewhere
•3pt linkage constructed so that it is structurally very strong. The loading from the three points is distributed so it will not cause stress failures
•Removable rear door
•A one-piece cutting edge at the rear extends from the floor up the sides
•High quality paint finish, comprising rust inhibiting primer with high gloss enamel finish
Load
Capacity
Net
Weight
(kg)
765
0.4m�/400kg
120
790
0.5m�/500kg
155
0.6m�/600kg
170
0.73m�/730kg
192
Length
(mm)
Width
(mm)
Height
(mm)
5’ STD
945
1600
4’ HD
1000
1350
5’ HD
1000
1600
790
6’ HD
1000
1945
790
Model
Linkage
CAT 1 & 2
Tractor
(HP)
60+
Power Box
The Cashels Power Box is the economical option for hydraulically operated loading and
levelling at the rear of the tractor. The Power Box features simple and strong construction to
tackle the most arduous of tasks. It is suited best to 4 wheel drive tractors.
Available in 6’ single ram and 7’ single ram models. Quick attach system available as an
option.
•Mounting plates made from 10mm thick steel.
•Reinforced at all stress points
•Reinforced floor for wear resistance and strength, with inner ribs to reinforce the body
•High quality paint finish, comprising rust inhibiting primer with high gloss enamel overcoat
Model
Length
(mm)
Width
(mm)
Height
(mm)
Linkage
Load
Capacity
Net
Weight
(kg)
6’ HD
1165
1920
1025
CAT 1 & 2
0.75m�/750kg
325
7’HD
1165
2225
1025
Q.P.U.
0.86m�/860kg
375
Tractor
(HP)
60-100
We reserve the right to alter designs & specifications without notice. Copyright © Cashels Engineering Ltd 2011
10