SIMATIC S7-200 SIMATIC Controller

Transcription

SIMATIC S7-200 SIMATIC Controller
SIMATIC S7-200
Control technology a class of its own
SIMATIC Controller
Answers for industry.
Connectivity, modularity, compact:
So small – and so powerful
The Micro PLC SIMATIC S7-200 is truly in
a class of its own: it’s both compact and
highly powerful – especially considering
its real-time response – it’s fast, features
great communication options and comes
with easy-to-operate software and hardware.
But there’s more; the Micro PLC SIMATIC
S7-200 has a compact modular design –
for customized solutions which aren’t too
large, but flexible enough to be expanded anytime in the future.
All this makes the SIMATIC S7-200 a
great choice for open-loop control in the
lower performance range. Become one of
the thousands of S7-200 customers that
constantly benefit from Siemens PLC innovation and lower cost of ownership.
SIMATIC S7-200 delivers consistently
economical solutions. The entire
system family features
• powerful performance,
• optimum modularity and
• open communications.
In addition, the SIMATIC S7-200 programming tools make your job even easier:
this Micro PLC is easy to program allowing fast and easy realization of applications – and the add-on software libraries
accelerate special function configuration
even more.
This Micro PLC has been in successful use
in millions of applications around the
world – in both stand-alone and networked solutions.
Find out for yourself what the
SIMATIC S7-200 has to offer!
2
Open communication
Powerful performance
Optimal modularity
• Built-in RS 485 interface with data transmission rates up to 187.5 kbit/s
• PPI protocol system bus for trouble-free
networking
• Freeport mode programmable for userspecific protocols for any peripheral devices
• Fast connection to PROFIBUS using the
slave module
• Powerful connection to AS-Interface
using the master module
• Communications anywhere using the
modem module (for remote maintenance, teleservice or telecontrol)
• Connection to Industrial Ethernet via the
Ethernet module
• Internet connectivity, e-mail, HTTP,
and FTP server functionality using the
Internet module
• S7-200 PC Access – OPC Server for
simple connection to the PC environment
• Small and compact – ideal for any
applications where space is tight
• Basic and advanced functionality in all
CPU models
• Large program and data memory
• Outstanding real-time response – being
in total command of the entire process
at any time means increased quality,
efficiency and safety
• Easy-to-use STEP 7-Micro/WIN engineering software – ideal for both beginners and experts
• Systems engineering:
• 5 distinct CPUs in the performance
range with comprehensive basic functionality and integrated Freeport communications interface
• A wide range of expansion modules for
various functions:
– Digital/analog expansions, scalable
to specific requirements
– PROFIBUS communication as a slave
– AS-Interface communication as a
master
– Exact temperature measurement
– Positioning
– Remote diagnostics
– Ethernet/Internet communications
– SIWAREX MS weighing module
• HMI functions
• STEP 7-Micro/WIN software with
Micro/WIN add-on instruction library
• Compelling systems engineering – now
featuring precise dimensioning and
optimum solutions for a wide range of
different requirements for the complete automation task
3
Fast, intelligent and well-planned:
A system of endless possibilities
CPU 224
6 inputs / 4 outputs
not expandable
10 I/O max.
8 inputs / 6 outputs
+ 2 expansion modules max.
94 I/O max.
14 inputs / 10 outputs
+ 7 expansion modules max.
224 I/O max.
Input modules
Output modules
Digital and analog
expansions
CPUs
CPU 222
Input/output modules
RTD temperature
measurement
TC temperature
measurement
SIWAREX MS
weighing module
AS-Interface master
CP 243-2
max. 2 modules
PROFIBUS DP slave
EM 277
Ethernet module
CP 243-1
max. 1 module
Operating and
monitoring
Communication
Highlights
• Memory card for data logging,
recipe management, saving of
STEP 7-Micro/WIN project, and storage of documentation in various
formats
• PID auto-tune function
• 2 built-in serial ports for extended
communication options, e.g. with
other manufacturers’ devices
(CPU 224 XP, CPU 226)
• CPU 224 XP with built-in analog
inputs/output
CPU 221
Specific
expansions
Tried and tested worldwide featuring:
• Compact design
• Practical functionality
• Modular expansion options
• Built-in RS 485 serial networking
port(s)
• Excellent real-time behavior
• Extremely fast and precise process
and sequence control
• Seamless control of time-critical
processes by means of timed interrupts
• Simple and user-friendly wiring
with removable terminal strips on
the CPU and expansion modules –
permanent wiring
TD 100C
4
TD 200 / TD 200C
TD 400C
CPU 224XPsi
CPU 226
14 inputs / 10 outputs
2 AI/1 AO
+ 7 expansion modules max.
224 I/O max.
14 inputs / 10 outputs
(current sinking digital outputs)
2 AI/1 AO + 7 expansion modules max.
224 I/O max.
24 inputs / 16 outputs
+ 7 expansion modules max.
256 I/O max.
Software
CPU 224XP
STEP 7-Micro/WIN
• Easy to use
• Windows standard
• Configuration instead of
programming using Wizards
• Powerful instruction set easy
to use via drag-and-drop
• Status for LAD, FBD and STL
• Modular building block system
• Expansion modules can be scaled
according to requirements
• Digital expansion modules from 4/4 to
32/32 inputs/outputs
• Analog expansion modules with 4 or 8
inputs, 2 to 4 outputs, and 4 inputs and
1 output
• Power modules for switching
loads: 5 A DC or 10 A relay
• Modules for exact temperature
measurement to a tenth of a degree
Celsius or Fahrenheit:
– RTD module for measurement of
resistance temperature sensors
– TC module for measurements with
thermocouples
• EM 253 positioning module for
controlling stepper motors and servo
drives
• SIWAREX MS compact weighing module
for the SIMATIC S7-200
• Integrated PPI interface as S7-200
system bus or as freely programmable
interface – for connecting printers,
barcode scanners, etc.
• From CPU 222 upwards PROFIBUScapable via PROFIBUS DP slave module
• From CPU 222 upwards functionality as
AS-Interface master via AS-Interface
module
• EM 241 modem module with complete
functions for PLC communications such
as remote maintenance, telecontrol,
remote diagnostics, reporting, remote
data transmission, etc.
• CP 243-IT, Internet Technology module
for communication via FTP, e-mail or
HTTP
• SINAUT MD720-3 GSM/GRPS modem;
IP communication via GSM NET;
quadband
TD 100C
• Reflective 4-line LCD screen
• Up to 14 configurable keys
• Customizable operator interface
TD 200
• Backlit 2-line LCD screen
• 8 programmable function keys
TD 200C
• Backlit 2-line LCD screen
• Up to 20 configurable keys
• Customizable operator interface
TD 400C
• Backlit 4-line LCD screen
• Up to 15 configurable keys with
audible, visible, and tactile feedback
• Customizable operator interface
OP 73micro
• 3" pixel graphic LCD screen
• Signaling system with definable signal
classes
• 5 online languages incl. Asian and
Cyrillic scripts
TP 177micro
• 5.7" pixel graphic LCD screen, suitable
for horizontal or vertical mounting
• Signaling system with definable signal
classes
• 5 online languages incl. Asian and
Cyrillic scripts
Input/output modules
Positioning module
EM 253
Internet Technology module
CP 243-1 IT
max. 1 module
OP 73micro
Modem module
EM 241
TP 177micro
GSM/GPRS modem
SINAUT MD720-3
5
For service, networking, remote control and more:
Communication at every level
The communications possibilities of the
Micro PLC SIMATIC S7-200 are unique.
The built-in RS 485 interfaces can operate
at data transmission rates up to 187.5
kbit/s functioning as follows:
• As a system bus with a maximum of
126 stations. In this capacity, it is
possible to network programming
devices, SIMATIC HMI products and
SIMATIC CPUs without a problem. The
integrated PPI protocol is used for pure
S7-200 networks supporting multiple
masters from a single port. In a network
consisting of other Siemens components
(SIMATIC S7-300/400 and SIMATIC HMI,
etc.), the S7-200 CPUs are integrated as
MPI slaves.
• In Freeport mode (up to max. 115.2
kbaud) with user-specific protocols
(e.g. ASCII protocol).
This means the SIMATIC S7-200 is open
for any connected device; for example,
it enables connection of a modem, barcode scanner, PC, non-Siemens PLC and
much more.
By means of the USS protocol for drives,
as many as 32 Siemens frequency converters can be controlled without additional hardware.
• The Modbus RTU Library included in the
package also enables connection to a
Modbus RTU network as a Master or a
Slave.
6
OPC Driver with PC Access
PC Access is the ideal basis for data exchange between S7-200 and a connected
PC – regardless of the communication
link selected (PPI, modem, Ethernet/IT
CP). As an OPC Server, PC Access offers
you the option of writing or reading
S7-200 data with Microsoft Excel, or any
other OPC client application. As an OPC
Client, it can be used for ProTool Pro,
WinCC flexible RT, Win CC, etc. With capability up to 8 connections, the configuration, programming and monitoring can
be implemented from a central location,
saving both time and money.
The Internet Technology module
CP 243-1 IT also offers you fast access by
permitting a simple universal connection
of the PLC to different computers by
means of FTP, HTTP, JAVA, and e-mail.
The Ethernet module CP 243-1 allows you
to access S7-200 process data quickly
over Ethernet for archiving or further
processing. The configuration support
from STEP 7-Micro/WIN ensures simple
commissioning and convenient diagnostic options.
Modem communications
The S7-200 CPUs can be accessed nearly anywhere in
the world by modem via wired network or radio.
• Teleservice: the modem communication option is
useful for avoiding expensive service calls. Two
modems are all you need for remote use of the
complete range of functions such as program transfer,
status or control; the communications tools are
integrated as a standard feature. External modems can
be used as local modems.
• Telecontrol: you can call up messages and measured
values via modem as well as define new setpoints or
commands. In this case, one base station S7-200 can
control a nearly unlimited number of remote stations.
The protocols for data transmission are freely
selectable, e.g. for text messages directly to a cell
phone, error messages to a fax machine or Modbus
RTU.
Speedy PROFIBUS connection
All CPUs from 222 upwards can be run via the EM 277
communications module as a norm slave on a
PROFIBUS DP network with a transmission rate of up to
12 Mbit/s. This open feature of the S7-200 to higherlevel PROFIBUS DP control levels ensures you can
integrate individual machines into your production line.
With the EM 277 expansion module, you can implement
PROFIBUS capability of individual machines equipped
with S7-200.
Powerful AS-Interface connection
The CP 243-2 turns all CPUs from 222 upwards into
powerful masters on the AS-Interface network.
According to the new AS-Interface specification V 2.1,
you can connect up to 62 stations, making even analog
sensors easy to integrate. With AS-Interface, you can
connect up to 248 DIs + 186 DOs in the maximum
configuration. The max. number of 62 stations can
include up to 31 analog modules. The configuration of
the slaves and reading/writing of data is supported by
the handy AS-Interface Wizard.
DI/DO/AI/AO
• Programming
device/PC
• Text Display
• Operator Panel
• Printer
• Modem
• Barcode reader
• Devices from
other vendors
7
So easy to use:
The software for plug & play
The STEP 7-Micro/WIN programming software features time-saving and powerful
tools – and that means great cost savings
in your day-to-day work. Operation of
the programming software is the same
as standard Windows applications.
Micro/WIN contains all the necessary
tools for programming the entire
S7-200 range of controllers. You have
the powerful SIMATIC instruction set at
your disposal and you can program in
accordance with IEC 1131.
A host of functions such as Trend Charts
and wizards now make programming
even easier. And STEP 7-Micro/WIN 4.0
has even more to offer: e.g. segmented
data memories, improved handling of the
program and command structure or diagnostic functions such as a user-specific
LED configuration error history, and runtime edit and online download.
1
Integrated online functions:
• Runtime edit
• Online status
2
Context-sensitive online help is possible
for all functions
3
Clear and informative symbols and
symbol table
• Standard symbol table
• User-defined table
4
Structured programming with
libraries
• USS protocol for actuating drives
• Modbus library
• User-defined libraries
5
Structured programming with
subroutines
• Parameterizable subroutines
• Password-protected subroutines
• Multiple calls of subroutines in user
program
• Import/export of subroutines possible
6
Debugging
• Fast online debugging
• Fault localization at the click of a mouse
Programming in the standard editors
LAD, FBD and STL – and it‘s easy to
change between them.
Software add-ons
SIMATIC WinCC flexible Micro –
OP 73micro and TP 177micro
A special, low-cost engineering software
has been developed for configuration of
the OP 73micro and TP 177micro HMI
panels with WinCC flexible:
WinCC flexible Micro. It goes without saying that the Compact/Standard/Advanced
versions can also be used. Simple and
quick configuration possible by means of
a clear user interface, pre-generated
graphics objects, intelligent tools for
graphic configuration and support of
8
1
6
4
multilingual configurations. A PC/PPI
adapter cable is required for downloading
the configuration.
SINAUT Micro SC –
GRPS modem SINAUT MD720-3
Wireless bi-directional communication
between S7-200 controllers and the
SINAUT MD720-3 modem is provided via
GRPS and the new GRPS management
with the aid of the OPC routing software
SINAUT Micro SC. Using quadband modem technology, most mobile radio providers with GRPS network can be utilized.
3
GRPS and the Internet guarantee worldwide, fast communication and short
transmission times – at low costs, as only
the transferred data volume is charged.
SIWATOOL MS –
SIWAREX MS weighing module
SIWAREX weighing technology is
easily integrated with the aid of the
STEP 7-Micro/WIN program instructions
that are included with the SIWATOOL
engineering software. Ready-to-use
“Getting Started” application examples
are also provided. The SIWATOOL MS
2
5
software configures the SIWAREX MS
weighing module using standard
Windows dialogs – without requiring
specific PLC knowledge. Fast troubleshooting is ensured in online mode with
a host of diagnostic options provided by
the SIWATOOL MS.
9
Easier than ever:
Convenient wizards
STEP 7-Micro/WIN supports even the most
complex automation solution with the
following user-friendly wizards:
• TD 100C, TD 200, TD 200C, TD 400C
• PID loops
• High-speed counters
• NetRead-NetWrite
• AS-Interface Wizard
• Ethernet/Internet Wizard
• Positioning Wizard
• Positioning Control Panel
• Modem
• Data Logging
• PID Auto-Tune Control Panel
• PTO (pulse outputs)
• Recipe management
• SIWAREX MS
• Modbus RTU
• USS protocol
The most important benefits of the
wizards
• Parameterization instead of programming
• Graphical configuration of complex
tasks
• Automatic check of available memory area
• Automatic generation of program logic
and subroutines
1
IT Wizard
• Configuring of access authorization, e-mail, and FTP
• Parameterization of data exchange over Ethernet, i.e. CPU
to CPU
IT Wizard
Control Panel
• Start-up tool for motion
applications
• Adaptation and testing of the position parameters
• Modification of traverse profiles
2
Control Panel
Positioning Wizard
• Parameterization of machine data
• Generation of different traverse
profiles
• Selection of different types of
reference point approaches
3
Positioning Wizard
10
3
2
1
11
Perfect match:
S7-200 and Micro Panels
With the SIMATIC Micro Panels, we can offer you an excellent solution for operator
control and monitoring from a single
supplier that was specially designed for
SIMATIC S7-200. The panels perfectly
match the S7-200 controller. For you this
means less configuring expense. The
panels’ plug & play functionality ensures
perfect interaction of all components. You
decide which panel is right for you.*
For simple applications, there are
TD panels which can be customized
and used whenever narrow space
requirements matter.
Coming with the matching software…
Using the innovative WinCC flexible Micro
development software, the OP 73micro
and TP 177micro panels can be easily
configured – at the highest possible automation level.
Text displays TD 100C, TD 200, TD 200C,
and TD 400C are configured using the
SIMATIC STEP 7-Micro/WIN software.
* We take compatibility very seriously – for this reason,
you can of course connect any other panel from our
SIMATIC HMI range to the S7-200.
12
Text display
TD 100C
Text displays
TD 200 and TD 200C
• 4-line reflective backlit screen for
viewing text with 16 characters per
line
• Up to 14 user-configurable keys
• User-defined display layout
• Representation, position and size of
the keys can be configured as desired
• Password protection of all functions
• Up to 40 alarms can be easily configured
• Simplified Asian and Cyrillic fonts
• Backlit high-contrast LCD screen,
2-line
• Up to 80 text messages with integrated variables
• Configuration is saved on the
S7-200: intervention in the control
program is possible via input of setpoints
• Setting of inputs and outputs (password protection of all functions)
• 5 online languages
• Simplified Asian and Cyrillic fonts
Extras for TD 200
• 8 user-configurable function keys in
fixed arrangement
Extras for TD 200C
• Up to 20 user-configurable keys
• User-defined display layout
• Representation, position and size of
the keys can be configured as desired
Text display
TD 400C
• Backlit, high-contrast LCD screen,
4-line
• Up to 80 text messages with integral
variables
• Configuration stored in S7-200:
Control program can be manipulated via setpoints
• Setting inputs and outputs (password protection for all functions)
• 6 online languages
• Simplified Asian and Cyrillic character sets
• Up to 15 permanently assigned tactile keys. Can be used for multiple
functions
• Audible and visible feedback can be
programmed with the TD 400C in
addition to the tactile feature of the
keys
• User-selectable operator interface
layout
• Design (colors, images, text, etc.)
of the operator interface can be defined individually
Graphics Operator Panel
OP 73micro
The compact kid among the panels.
Simple in detail, but full of functionality.
• Full graphic 3" LCD screen:
bitmaps, bars, different font sizes,
Cyrillic font
• End-to-end message system with
user-definable message classes (e.g.
for operating and fault messages)
and message history (128 entries)
• 5 online languages (incl. Asian and
Cyrillic fonts)
• Access protection (password system)
Touch Panel
TP 177micro
For demanding users who appreciate
a fully capable graphic display as well
as touch functionality, the
TP 177micro is the right solution
containing all of the required basic
functions.
• Intuitive use via 6" touch screen
• More choices of application through
vertical installation
• Improved graphics options thanks to
vector graphics blue mode (4 levels
of blue)
• Efficient and flexible message system for increased plant transparency
• Display of machine and plant states
for defined message classes
• Transparent process visualization
• Optimal readability
• NEW: Trend display
13
Expandable, flexible and powerful:
Extras to meet any needs
Real-time response
The advanced technology down to the
last detail ensures our CPUs deliver excellent real-time response rates:
• 4 or 6 independent hardware counters,
each with 30 kHz, 2 x 200 kHz with a
CPU 224 XP, e.g. for precise path monitoring with incremental encoders or for
high-speed counting of process events
• 4 independent alarm inputs, input filter
time 0.2 ms to program action – for
maximum process safety
• Pulse-capturing function for signals
> 0.2 ms for fast events from the application
• 2 pulse outputs, each 20 kHz, or
2 x 100 kHz with CPU 224 XP with
pulse-width modulation and pulseno-pulse setpoint – e.g. for controlling
stepper motors
• 2 timed interrupts starting at 1 ms and
adjustable in increments of 1 ms – for
bumpless control of rapidly changing
processes
• Fast analog inputs – signal conversion
with 25 µs, 12-bit resolution
• Real-time clock
Fast counters
• Operating independently of each other,
of other operations and of the program
cycle
• Interrupt triggering when user selectable counted values are reached – reaction time from the detection of an input
signal to switching of an output is
300 µs
• 4-edge evaluation when incremental
position encoders are used for exact
positioning
Timed interrupts
• Between 1 and 255 ms, with a resolution of 1 ms
• For example: it is possible to record
and process signals on screw insertion
machine at 3000 RPM after just a quarter turn. This enables very precise recording, for instance, of tightening torques to ensure optimum fastening of
the screw.
14
Alarm inputs
• 4 independent inputs
• For registering signals in rapid succession
• Response time of 200 µs–500 µs for signal detection/300 µs for signal output
• Response to positive-going and/or negative-going signal edge
• Max. 16 interrupts in one queue depending on prioritization
Feature
CPU 221
CPU 222
CPU 224
CPU 224XP
CPU 224XPsi
CPU 226
Independent hardware counters
4
4
6
6
Independent alarm inputs
4
4
4
4
Pulse outputs
2
2
2
2
Time interrupts
1 to 250 ms
1 to 250 ms
1 to 250 ms
1 to 250 ms
Real-time clock
optional
optional
integrated
integrated
Binary processing speed
0.22 µs
0.22 µs
0.22 µs
0.22 µs
Great well-rounded technology
Memory cartridge
Small and practical
SITOP smart – optimally matched
to SIMATIC S7-200
SITOP smart is one of the narrowest DIN
rail mounted power supply units and exhibits an impressive overload behavior.
Even high loads can be switched on without any problems. Nominal outputs of
continuous 120 percent position the
power supplies as the most reliable of
their class. Numerous certifications simplify their universal and worldwide use,
as well as their deployment under hazardous conditions.
EEPROM memory modules
A small optional EEPROM memory module can
save you a lot of time and cost. It makes it very
easy to copy, update or exchange your user
program on the device. And if necessary, you
can use this module to send a program quickly
and inexpensively to your customers. You just
shut off the power, plug in the module, turn it
all back on – and the program is instantly updated. Whether project documentation, recipe
handling or data logging – our memory modules are available with 64 KB or 256 KB.
Battery module
To ensure no user data is lost, you can
use the optional battery module for longterm backups to extend backup time from
the roughly 5 days of internal backup to,
in general, a total of 200 days.
For tough customers: SIPLUS extreme
Operating under extreme conditions?
No problem! If you have to operate your
system in an extended temperature
range, require added condensation protection or demand other voltage ratings,
then SIPLUS extreme is the solution for
you. It lets you adapt your CPUs to your
special requirements.
Available options
Project documentation
• Bitmap files, PDF files, DOC files
• Complete STEP 7-Micro/WIN projects can
be transferred to the memory card with
S7-200 Explorer – giving you onsite
access to the current user data at all
times even without STEP 7-Micro/WIN
Recipe handling
• Definition and download of the recipes,
e.g. production data, machine parameters, etc.
• Better use of memory by occupying the
data memory in the CPU with only one
recipe: online updating and adaptation
Data logging
• Dynamic storage, e.g. of performance or
statistics data and fault or error messages
• Optionally with time stamp
• Log file transferable to PC via S7-200
Explorer
Real-time clock
Whether you need to count operating
hours, warm up rooms or attach a time
stamp to messages: the integrated realtime clock on the S7-200 runs to the
minute and to the day via the software
according to your settings – even in leap
years. Including automatic daylight saving time switchover.
Analog potentiometers
With the integrated analog potentiometers on the S7-200, you can optimize the
process sequence almost “according to
feel” without a PC or HMI. They let you
fine-tune the contents of data registries,
time values, preassigned counter values
or other parameters without meddling
with the program. This is a practical way,
for example, to change a welding time or
delay time quickly and directly.
15
Facts, facts, facts:
The CPUs
Identical technical specifications of the CPUs 221, 222, 224, 224XP, 224XPsi and 226:
Feature
CPU 221, 222, 224, 224XP, 224XPsi, 226
32-bit floating-point math in accordance with IEEE standard
yes
Fully configurable, integrated PID controller
yes, up to 8 independent PID loops
Bit processing speed
0.22 µs
Time-controlled interrupts
2 (cycle time between 1 and 255 ms at 1 ms resolution)
Hardware interrupts (edge detection at inputs)
max. 4 inputs
Flags, timers, counters
256 each
High-speed counters
4–6 (depending on CPU), max. 30 kHz, or 200 kHz with CPU 224 XP
Pulse outputs (pulse-width- or frequency-modulated)
2 outputs, 20 kHz each (for DC versions), 100 kHz with CPU 224 XP
Program and data memory
retentive (non-volatile)
Storage of dynamic data after a power interruption
retentive: non-volatile via internal high-performance capacitor and/or additional battery
module: loading of data lock with STEP 7-Micro/WIN, TD 200C or by user program to
integrated EEPROM
Backup of dynamic data with battery module
typ. 200 days
Built-in serial port(s)
yes, RS 485 interface supporting the following operating modes: PPI master or slave/MPI
slave/Freeport (freely configurable ASCII protocol), Modbus Master/Slave
Max. baud rate
187.5 kbaud (PPI/MPI) or 115.2 kbaud (Freeport)
Programming software
STEP 7-Micro/WIN supports all standards such as STL, CSF or LAD
Optional program memory module
yes, programmable in CPU, for program transmission, data logging, recipe, documentation
DC/DC/DC version
yes
Supply voltage
24 V DC
Digital inputs
24 V DC
Digital outputs
24 V DC, max. 0.75 A, parallel connection possible for higher switching capacity
AC/DC/relay version
yes
Supply voltage
85–264 V AC
Digital inputs
24 V DC
Digital outputs
5–30 V DC or 5–250 V AC, max. 2 A (relay)
Accessories
Cable
RS 232 Smart Cable (Multimaster1, 2, 3)
USB Smart Cable (Multimaster4)
Isolation
yes
yes
Power supply
from CPU
from USB Port
Supported protocols
PPI and ASCII (Freeport); 10/11 bit
PPI; 10/11 bit
PPI communication
9.6 k; 19.2 k; 187.5 k
9.6 k; 19.2 k; 187.5 k
Communication setting
DIP switch; RS 232 automatically
unnecessary
LED display
yes
yes
Required software
STEP 7-Micro/WIN V3.2 from SP4
STEP 7-Micro/WIN V3.2 from SP4
1) as SIPLUS component also for extended temperature range –25...+70 °C and aggressive atmospheres/condensation (www.siemens.com/siplus)
2) RS 232 Smart Cable: for networks and external modems (including GSM and GPRS)
3) Settings, e.g. for modems, are stored permanently
4) USB Smart Cable: Multimaster for USB
16
Specific technical data on the CPUs:
Feature
CPU 2221
CPU 2211
CPU 2241
Integrated dig. inputs/outputs
6 DI/4 DO
8 DI/6 DO
14 DI/10 DO
Digital inputs/outputs/max. number of
channels with expansion modules
–
48/46/94
CPU 224XP1
CPU 224XPsi2
CPU 2261
14 DI/10 DO
24 DI/16 DO
114/110/224
114/110/224
128/128/256
32/28/44
Analog inputs/outputs/max. number of
channels with expansion modules
–
16/8/16
32/28/44
2 AI/1 AO integrated
32/28/44
Program memory
4 KByte
4 KByte
8/12 KByte
12/16 KByte
16/24 KByte
Data memory
2 KByte
2 KByte
8 KByte
10 KByte
10 KByte
Storage of dyn. data
via high-performance capacitor
typ. 50 h
typ. 50 h
typ. 100 h
typ. 100 h
typ. 100 h
High-speed counters
4 x 30 kHz,
of which 2 x 20 kHz
A/B counter usable
4 x 30 kHz,
of which 2 x 20 kHz
A/B counter usable
6 x 30 kHz,
of which 4 x 20 kHz
A/B counter usable
4 x 30 kHz, 2 x 200 kHz
of which 3 x 20 kHz +
1 x 100 kHz
A/B counter usable
6 x 30 kHz,
of which 4 x 20 kHz
A/B counter usable
Communications interfaces RS 485
1
1
1
2
2
both interfaces
both interfaces
yes
yes
yes
yes
yes
Supported protocols:
– PPI master/slave
– MPI slave
yes
yes
yes
yes
yes
– Freeport (freely config. ASCII protocol)
yes
yes
yes
yes
yes
Optional communications possibilities
not expandable
yes, PROFIBUS DP Slave
and/or AS-Interface
Master/Ethernet/
Internet/Modem
yes, PROFIBUS DP Slave
and/or AS-Interface
Master/Ethernet/
Internet/Modem
yes, PROFIBUS DP Slave
and/or AS-Interface
Master/Ethernet/
Internet/Modem
yes, PROFIBUS DP Slave
and/or AS-Interface
Master/Ethernet/
Internet/Modem
Built-in 8-bit analog potentiometer
1
1
2
2
2
(for commissioning, value change)
Real-time clock
optional
optional
yes
yes
yes
Integrated 24-V-DC sensor supply volt.
max. 180 mA
max. 180 mA
max. 280 mA
max. 280 mA
max. 400 mA
Removable terminal strip
–
–
yes
yes
yes
Dimensions (W x H x D in mm)
90 x 80 x 62
90 x 80 x 62
120.5 x 80 x 62
140 x 80 x 62
196 x 80 x 62
1) As SIPLUS component also for extended temperature range –25...+70 °C
and aggressive atmospheres/condensation (www.siemens.de/siplus)
2) CPU 224XPsi (current-sinking digital outputs)
17
Facts, facts, facts:
Digital expansions
Technical data:
Digital I/O modules
EM 2211
EM 2221
EM 2221
Number of inputs/outputs
8 DI (DC)
8 DO (DC)
8 DO (relay)
Number of inputs
8
–
–
Input type
24 V DC
–
–
Sinking/sourcing
x/x
–
–
Input voltage
24 V DC, max. 30 V
–
–
Isolation
yes
–
–
In groups of
4 inputs
–
–
Number of outputs
–
8
8
Output type
–
24 V DC
relay
Output current
–
0.75 A in group-parallel connection
possible for higher switching capacity
2A
Output voltage DC
–
20.4–28.8 V
5–30 V
(permissible range) AC
–
–
5–250 V
Isolation
–
yes
yes
In groups of
–
4 outputs
4 outputs
Removable terminal strip
yes
yes
yes
Dimensions (W x H x D in mm)
46 x 80 x 62
46 x 80 x 62
46 x 80 x 62
Digital I/O modules
EM 2211
EM 222
EM 222
Number of inputs/outputs
16 DI (DC)
4 DO (DC)
4 DO (relay)
Number of inputs
16
–
–
Type of input
24 V DC
–
–
Sinking/sourcing
x/x
–
–
Input voltage
24 V DC, max. 30 V
–
–
Isolation
yes
–
–
In groups of
4 inputs
–
–
Number of outputs
–
4
4
Output type
–
24 V DC
relay
Output current
–
5 A max. per output, switchable
in parallel for greater power
10 A max. per output
Output voltage DC (permissible range) AC
–
20.4–28.8 V
12–250 V
Isolation
–
yes
yes
In groups of
–
1 output
1 output
Removable terminal strip
yes
yes
yes
Dimensions (W x H x D in mm)
71.2 x 80 x 62
46 x 80 x 62
46 x 80 x 62
1) As SIPLUS component also for extended temperature range –25...+70 °C
and aggressive atmospheres/condensation (www.siemens.com/siplus)
18
Technical data:
Digital I/O modules
EM 2231
EM 2231
EM 2231
EM 2231
Number of inputs/outputs
4 DI (DC) / 4 DO (DC)
4 DI (DC) / 4 DO (relay)
8 DI (DC) / 8 DO (DC)
8 DI (DC) / 8 DO (relay)
Number of inputs
4
4
8
8
Input type
24 V DC
24 V DC
24 V DC
24 V DC
Sinking/sourcing
x/x
x/x
x/x
x/x
Input voltage
24 V DC, max. 30 V
24 V DC, max. 30 V
24 V DC, max. 30 V
24 V DC, max. 30 V
Isolation
no
no
yes
yes
In groups of
4 inputs
4 inputs
4 inputs
4 inputs
Number of outputs
4
4
8
8
Output type
24 V DC
relay
24 V DC
relay
Output current
0.75 A in
parallel connection
possible for higher
switching capacity
2A
0.75 A in groupparallel connection
possible for higher
switching capacity
2A
Output voltage DC
20.4–28.8 V
5–30 V
20.4–28.8 V
5–30 V
(Permissible range) AC
–
5–250 V
–
5–250 V
Isolation
no
no
yes
yes
In groups of
4 outputs
4 outputs
4 outputs
4 outputs
Removable terminal strip
yes
yes
yes
yes
Dimensions (W x H x D in mm)
46 x 80 x 62
46 x 80 x 62
71.2 x 80 x 62
71.2 x 80 x 62
Digital I/O modules
EM 2231
EM 2231
EM 223
EM 223
Number of inputs/outputs
16 DI (DC) / 16 DO (DC)
16 DI (DC) / 16 DO (relay)
32 DI (DC) / 32 DO (DC)
32 DI (DC) / 32 DO (relay)
Number of inputs
16
16
32
32
Input type
24 V DC
24 V DC
24 V DC
24 V DC
Sinking/sourcing
x/x
x/x
x/x
x/x
Input voltage
24 V DC, max. 30 V
24 V DC, max. 30 V
24 V DC, max. 30 V
24 V DC, max. 30 V
Isolation
yes
yes
yes
yes
In groups of
8 inputs
8 inputs
16 inputs
16 inputs
Number of outputs
16
16
32
32
Output type
24 V DC
relay
24 V DC
relay
Output current
0.75 A in group parallel
connection possible for
higher switching capacity
2A
0.75 A in group parallel
connection possible for
higher switching capacity
2A
Output voltage DC
20.4–28.8 V
5–30 V
20.4–28.8 V
5–30 V
(Permissible range) AC
–
5–250 V
–
5–250 V
Isolation
yes
yes
yes
yes
In groups of
4/4/8 outputs
4 outputs
16 outputs
11/11/10 outputs
Removable
terminal strip
yes
yes
yes
yes
Dimensions (W x H x D in mm)
137.3 x 80 x 62
137.3 x 80 x 62
196 x 80 x 62
196 x 80 x 62
19
Facts, facts, facts:
Analog expansions
Technical data:
Analog I/O modules
EM 2311
EM 231
EM 2321
EM 232
EM 2351
Number of inputs/outputs
4 AI
8 AI
2 AO
4 AO
4 AI/1 AO
Number of inputs
4
8
–
–
4
Input type
0–10 V/0–20 mA
0–10 V/0–20 mA
–
–
0–10 V/0–20 mA
Voltage ranges
0–10 V, 0–5 V,
+/–5 V, +/–2.5 V
0–10 V, 0–5 V, +/–5 V,
+/–2.5 V (Ch 0 – 5)
0–10 V, 0–5 V, +/–5 V,
+/–2.5 V, 0–20 mA
(Ch 6 – 7)
–
–
0–10 V, 0–5 V
Resolution
12 bit
12 bit
–
–
12 bit
Isolation
no
no
–
–
no
Number of outputs
–
–
2
4
1
Output type
–
–
+/–10 V, 0–20 mA
+/–10 V, 0–20 mA
+/–10 V, 0–20 mA
Resolution
–
–
–
–
12 bit volt.,
11 bit current
12 bit volt.,
11 bit current
12 bit volt.,
11 bit current
Isolation
–
–
no
no
no
Removable terminal strip
no
no
no
no
no
Dimensions (W x H x D in mm)
71.2 x 80 x 62
71.2 x 80 x 62
46 x 80 x 62
71.2 x 80 x 62
71.2 x 80 x 62
Temperature measurement
modules
EM 231 TC
Thermocouples
EM 231 TC
Thermocouples
EM 231 RTD
Resistance type sensors1
EM 231 RTD
Resistance type sensors
Number of inputs/outputs
4 AI
8 AI
2 AI
4 AI
Number of inputs
4
8
2
4
Input type
Thermocouples
Type S, T, R, E, N, K, J
Voltage +/–80 mV
Thermocouples
Type S, T, R, E, N, K, J
Voltage +/–80 mV
Pt 100, 200, 500, 1000 ohm,
Pt 10.000,
Ni 10, 120, 1000 ohm,
R 150, 300, 600 ohm
Pt 100, 200, 500, 1000 ohm,
Pt 10.000,
Ni 10, 120, 1000 ohm,
R 150, 300, 600 ohm
Resolution
15 bit + sign
15 bit + sign
15 bit + sign
15 bit + sign
Isolation
500 V AC
500 V AC
500 V AC
500 V AC
Cold-junction compensation
yes
yes
not nec.
not nec.
Wiring
two-wire
two-wire
two-, three- or four-wire
two-, three- or four-wire
Max. wire length to sensor
100 m
100 m
100 m
100 m
Removable terminal strip
no
no
no
no
Dimensions (W x H x D in mm)
71.2 x 80 x 62
71.2 x 80 x 62
71.2 x 80 x 62
71.2 x 80 x 62
Temperature values in Centigrade or degrees Fahrenheit are available in the program as values with one decimal place.
1) as SIPLUS component also for extended temperature range –25...+70 °C and aggressive atmospheres/condensation (www.siemens.com/siplus)
20
Technical data:
Positioning module EM 253
Number of inputs
5 points (RP, LMT–, LMT+, ZP, STP)
Type of inputs
active high/active low (IEC Type 1 sink, except ZP)
Number of integrated outputs
6 points (4 signals)
Type of outputs
P0+, P0–, P1+, P1–
P0, P1+, DIS, CLR
RS422/485 driver
Open drain
Switching frequency
P0+, P0–, P1+, P1–
200 kHz
Power supply:
L + supply voltage
Logic output voltage
L + supply current VS, 5 V DC load
Load current
0 mA (no load)
200 mA (rated load)
11 to 30 V DC
+5 V DC +/–10%, max. 200 mA
12 V DC Input
120 mA
300 mA
V DC Requirement +5 V DC/+24 V DC
190 mA/130 mA
Dissipation
2.5 W
Dimensions (W x H x D in mm)
71.2 x 80 x 62
Weight
190 g
24 V DC Input
70 mA
130 mA
SIWAREX MS weighing module
Communication interfaces
Measuring properties
• Fault limit acc. to DIN 1319-1 of the
measuring range end value at 20° ±10 K
• Internal resolution
data format of weight values
SIMATIC S7 bus, RS 232, TTY
0.05 %
65,535
2 byte (fixed point)
Number of measurements/second
50 or 30
Load cells
Strain gauges in 4-wire or 6-wire system
Load cell identifier
1 mV/V up to 4mV/V
Max. distance of load cells
500 m
Ex approvals and safety
CE, ATEX 100, FM, UL, cULus Haz. Loc.s
Degree of protection acc. to DIN EN 60529; IEC 60529
IP20
V DC Requirement +5 V DC/+24 V DC
145 mA/max. 130 mA
Dimensions (W x H x D in mm)
71.2 x 80 x 62
21
Facts, facts, facts:
Human Machine Interface
Technical data:
Operator panels
TD 100C
TD 2002
Display
Reflective LCD screen
Backlit LCD screen
LCD Screen: Number of lines
4
2
Characters per line (max.)
16 (ASCII/Cyrillic),
8 (Chinese)
20 (ASCII/Cyrillic),
10 (Chinese)
Resolution
132 x 65 pixels
181 x 33 pixels
Operator controls
Membrane keyboard
Membrane keyboard
Function keys (programmable)
14 configurable
8
System keys
6
5
Memory integrated (usable memory for user data)
User data on CPU
User data on CPU
Interfaces
1 PPI (RS 485)
for setup of a network with
max. 126 nodes
1 PPI (RS 485)
for setup of a network with
max. 126 nodes
Signals
(freely definable signal classes)
40
80
Signal buffer (number of entries)
–
–
Mimic diagrams
32
64
Variables
208
864
Graphics objects
–
–
Numeric/alphabetic input
•/–
•/–
Password
•
•
Online languages
1
5
Bar charts (pixel graphics)
–
•
Degree of protection (front/rear)
IP65, UL 50 Type 4X (when built in)/
IP20
IP65, UL 50 Type 4X (when built in)/
IP20
89.6 x 76
148 x 76
Functionality
Dimensions
Front panel (W x H in mm)
Depth of device in mm
35.7 (max. 44 with fittings)
28
Certification
CE, cULus, FM, C-Tick, ATEX
CE, cULus, FM, C-Tick, ATEX
Supply voltage
24 V DC (from S7-200 CPU only)
24 V DC
Ambient conditions
Operating temperature
• vertical mounting
• max. angle of inclination
Transport/storage temperature
0 ºC to 60 ºC
0 ºC to 60 ºC
–20 ºC to 60 ºC
0 ºC to 60 ºC
0 ºC to 60 ºC
–20 ºC to 60 ºC
Weight
110 g
190 g
Configuration/programming
STEP 7-Micro/WIN 4.0 SP2
STEP 7-Micro/WIN 4.0
1) MTBF for backlighting (at 25 ºC): OP 73micro about 100,000 h, TP 177micro about 50,000 h
2) As SIPLUS component also for extended temperature range –25...+70 °C and aggressive atmospheres/condensation (www.siemens.com/siplus)
• possible
– not possible
22
TD 200C
TD 400C
OP 73micro
TP 177micro
Backlit LCD screen
Backlit LCD screen
3" LCD screen
2
4
–
–
20 (ASCII/Cyrillic),
10 (Chinese)
32 (ASCII/Cyrillic),
16 (Chinese)
–
–
181 x 33 pixels
192 x 64 pixels
160 x 48 pixels
320 x 240 pixels
(240 x 320 pixels for vertical
configuration of TP 177micro)
Membrane keyboard
Membrane keyboard
Membrane keyboard
Touch screen
20 configurable
15 configurable
4
–
7
7
8
–
User data on CPU
User data on CPU
128 KB Flash
256 KB Flash
1 PPI (RS 485)
for setup of a network with
max. 126 nodes
1 PPI (RS 485)
for setup of a network with
max. 126 nodes
1 x RS 485
1 x RS 485
80
80
250
500
–
–
128 (no battery backup)
128 (no battery backup)
64
64
250
250
864
864
500
250
1
5.7" LCD screen, STN,
Blue Mode, 4 blue stages1
icons
icons
bitmaps/icons/background images
bitmaps/icons/background images
•/–
•/–
•/•
•/•
•
•
•
•
5
5
5
5
•
•
•
•
IP65, UL 50 Type 4X (when built in)/
IP20
IP65 (when built in)/
IP20
IP65 (when built in),
NEMA 4, NEMA 4X, NEMA 12/IP20
IP65 (when built in),
NEMA 4, NEMA 4X, NEMA 12/IP20
148 x 76
174 x 102
154 x 84
212 x 156
28
31
29
42
CE, cULus, FM, C-Tick, ATEX
CE, cULus, C-Tick
CE, cULus, C-Tick
CE, cULus, FM, C-Tick, ATEX
24 V DC
24 V DC
24 V DC
24 V DC
0 ºC to 60 ºC
0 ºC to 60 ºC
–20 ºC to 60 ºC
0 ºC to 50 ºC
0 ºC to 50 ºC
–20 ºC to 60 ºC
0 ºC to 50 ºC
0 ºC to 40 ºC
–20 ºC to 60 ºC
0 ºC to 50 ºC
0 ºC to 40 ºC
–20 ºC to 60 ºC
200 g
310 g
250 g
750 g
STEP 7-Micro/WIN 4.0
STEP 7-Micro/WIN 4.0 SP6
from WinCC flexible Micro
from WinCC flexible Micro
23
Facts, facts, facts:
The communication modules
Technical data
EM 277 PROFIBUS DP slave module1
CP 243-2 AS-Interface master module
Interface
1 communications interface RS 485
AS-Interface
Supported protocols:
– MPI slave
– PROFIBUS DP slave
AS-Interface
Transmission rate
9,600 baud up to 12 Mbaud
adaptive
– max. 5 ms cycle time with 31 slaves
– max. 10 ms cycle time with 62 slaves
Connectable stations:
– Text displays TD 100C, TD 200, TD 200C, TD 400C
– Operator panels, touch panels
– PG/PC with MPI interface (CPU download/
status via STEP 7-Micro/WIN possible)
– CPU S7-300/400
– PROFIBUS DP master or slaves
max. 62 AS-Interface slaves
Status displays
CPU error, power, DP error, DX mode
Status displays for slaves, error displays
Station address
Adjustable on module (0–99)
Not necessary
Galvanic isolation
500 V AC
no
Max. cable length (without repeater)
1200 m (at 93.75 kbaud)
100 m
Removable terminal strip
no
no
V DC Requirement +5 V DC/+24 V DC
150 mA/max. 180 mA
220 mA/100 mA
Dissipation
2.5 W
3.7 W
Dimensions (W x H x D in mm)
71.2 x 80 x 62
71.2 x 80 x 62
Weight
175 g
250 g
Modem communication modules
EM 241 modem module
SINAUT MD 720-32
Communication modules
Analog telephone connection
GPRS/GSM modem connection
Isolation
(phone line against Logic and …)
1500 V AC (galvanic)
–
Cable connector
RJ11 (6 points, 4-wire)
SMA/50 ohm (antenna) RS 232, jack: D-SUB 9-pin
Modem standards
Bell 103, Bell 212, V.21, V.22, V.22 bis,
V.23c, V.32, V.32 bis, V.34 (standard)
GPRS/CSD/quadband 850/900/1800/1900 MHz
V.24/V.28 (standard)
Safety features
Password, callback
–
Calling method
Pulse or tone dialing
–
Messaging protocols
(SMS)
Numerical
TAP (alphanumeric)
UCP commands 1, 30, 5
SMS/AT commands
–
Industrial standard protocols
Mode RTU, PPI,
integrated functions for data exchange
–
V DC Requirement +5 V DC/+24 V DC
80 mA/70 mA
12–30 V DC (24 V DC nominal)
Dissipation
2.1 W
5.5 W
Dimensions (W x H x D in mm)
71.2 x 80 x 62
22.5 x 99 x 114
Weight
190 g
150 g
1) As SIPLUS component also for extended temperature range –25...+70 °C and aggressive atmospheres/condensation (www.siemens.com/siplus)
2) Quadband antenna ANT 794-4MR required
24
Ethernet/Internet communication modules
CP 243-1
CP 243-1 IT
Transmission rate
10/100 Mbit/s
10/100 Mbit/s
Interfaces (connection to Industrial Ethernet)
RJ45
RJ45
Supply voltage
24 V DC
24 V DC
V DC Requirement +5 V DC/+24 V DC
55 mA/60 mA
55 mA/60 mA
Dissipation
1.75 W
1.75 W
Dimensions (W x H x D in mm)
71.2 x 80 x 62
71.2 x 80 x 62
Weight
150 g
150 g
Number of operable connections
8 S7 connections + 1 PG connection
8 S7 connections + 1 PG connection
Configuration
with STEP 7-Micro/WIN (V3.2 SP1 or later)
with STEP 7-Micro/WIN (V3.2 SP3 or later)
Number of connections to an e-mail server
–
1
E-mail client
–
32 e-mails with max. 1024 characters
Number of FTP/HTTP connections
–
1/4
S7/PG communication
IT communications
Adjustable access protection
–
8 users
Memory capacity of the file system
–
8 Mbytes
25
Facts, facts, facts:
Ordering data
Product
Order No.
Product
Order No.
Specific expansions
CPUs
RTD input module, 2 AI,
PT100/200/500/1000/10000,
NI100/120/1000, CU10,
Resistance 150/300/600 Ohm 15 bit + sign
6ES7 231-7PB22-0XA0
RTD input module, 4 AI,
PT100/200/500/1000/10000,
NI100/120/1000, CU10, 14 GOST
Resistance 150/300/600 Ohm 15 bit + sign
6ES7 231-7PC22-0XA0
6ES7 214-2BD23-0XB0
TC input module, 4 AI, ± 80 mV and thermocouple type J, K, S, T, R, E, N, 15 bit + sign
6ES7 231-7PD22-0XA0
CPU 224XPsi DC/DC/DC
(current-sinking digital outputs)
6ES7 214-2AS23-0XB0
TC input module, 8 AI, ± 80 mV and thermocouple type J, K, S, T, R, E, N, 15 bit + sign
6ES7 231-7PF22-0XA0
CPU 226 DC/DC/DC
6ES7 216-2AD23-0XB0
CPU 226 AC/DC/relay
6ES7 216-2BD23-0XB0
Positioning module EM 253, 200 kHz, for
controlling stepper or servo drives, open-loop
control, configuration with STEP 7-Micro/WIN
6ES7 253-1AA22-0XA0
SIWAREX MS weighing module for connecting
one scale
7MH4930-0AA01
CPU 221 DC/DC/DC (not expandable)
6ES7 211-0AA23-0XB0
CPU 221 AC/DC/relay (not expandable)
6ES7 211-0BA23-0XB0
CPU 222 DC/DC/DC
6ES7 212-1AB23-0XB0
CPU 222 AC/DC/relay
6ES7 212-1BB23-0XB0
CPU 224 DC/DC/DC
6ES7 214-1AD23-0XB0
CPU 224 AC/DC/relay
6ES7 214-1BD23-0XB0
CPU 224XP DC/DC/DC
6ES7 214-2AD23-0XB0
CPU 224XP AC/DC/relay
Expansion modules
Digital and analog expansions
Input module 8 x DI 24 V DC
6ES7 221-1BF22-0XA0
Communication
Input module 8 x DI 120/230 V
6ES7 221-1EF22-0XA0
PROFIBUS DP slave module EM 277
6ES7 277-0AA22-0XA0
Input module 16 x DI 24 V DC
6ES7 221-1BH22-0XA0
AS-Interface master module CP 243-2
6GK7 243-2AX01-0XA0
Output module 8 x DO 24 V DC
6ES7 222-1BF22-0XA0
Output module 8 x DO relay
6ES7 222-1HF22-0XA0
Output module 8 x DO 120/230 V
6ES7 222-1EF22-0XA0
Modem module EM 241 for analog telephone
networks for remote control, signaling,
CPU-to-CPU, CPU-to-PC communication
6ES7 241-1AA22-0XA0
Output module 4 x DO 24 V DC 5 A
6ES7 222-1BD22-0XA0
Industrial Ethernet module CP 243-1
for connection of S7-200 to Industrial Ethernet
6GK7 243-1EX00-0XE0
Output module 4 x DO relay 10 A
6ES7 222-1HD22-0XA0
Input/output module
4 x DI 24 V DC/4 x DO 24 V DC
6ES7 223-1BF22-0XA0
Input/output module
4 x DI 24 V DC/4 x DO relay
Internet Technology module CP 243-1 IT for
connection of S7-200 to Industrial Ethernet,
e-mail client, HTTP server, FTP client, FTP server,
8 MB flash file system
6GK7 243-1GX00-0XE0
6ES7 223-1HF22-0XA0
GSM/GPRS modem SINAUT MD 720-3
6NH9720-3AA00
GSM/GPRS modem antenna ANT 794-4 MR
6NH9860-1AA00
Input/output module
8 x DI 24 V DC/8 x DO 24 V DC
6ES7 223-1BH22-0XA0
Input/output module
8 x DI 24 V DC/8 x DO relay
6ES7 223-1PH22-0XA0
Input/output module
16 x DI 24 V DC/16 x DO 24 V DC
6ES7 223-1BL22-0XA0
Input/output module
16 x DI 24 V DC/16 x DO relay
6ES7 223-1PL22-0XA0
Input/output module
32 x DI 24 V DC/32 x DO 24 V DC
6ES7 223-1BM22-0XA0
Input/output module
32 x DI 24 V DC/32 x DO relay
6ES7 223-1PM22-0XA0
Analog input module 4 AI 12 bit
6ES7 231-0HC22-0XA0
Analog input module 8 AI 12 bit
6ES7 231-0HF22-0XA0
Analog output module 2 AO 12 bit
6ES7 232-0HB22-0XA0
Analog output module 4 AO 12 bit
6ES7 232-0HD22-0XA0
Analog input/output module 4 AI/1 AO 12 bit
6ES7 235-0KD22-0XA0
26
Manuals
S7-200 system manual (English)
6ES7 298-8FA24-8BH0
Operating instructions OP 73micro/TP 177micro
(WinCC flexible Micro) (English)
6AV6 691-1DF01-0AB0
User guide WinCC flexible Micro (English)
6AV6 691-1AA01-2AB0
Manual CP 243-2 with example programs (English)
6GK7 243-2AX00-8BA0
Product
Order No.
Product
Order No.
HMI
Software
TD 100C text display with custom user
interface, 4 lines with mounting accessories,
187.5 kbaud
STEP 7-Micro/WIN V4.0 engineering software;
for Windows 2000, XP, Vista; 6 languages, incl.
documentation on CD; single user license
6ES7 810-2CC03-0YX0
STEP 7-Micro/WIN V4.0 engineering software;
for Windows 2000, XP, Vista; 6 languages, incl.
documentation on CD; upgrade license from
Micro/DOS and Micro/WIN Vx.x to V4.0
6ES7 810-2CC03-0YX3
STEP 7-Micro/WIN Add-On Instruction Library
V1.1; USS protocol for control of drives and
Modbus protocol for data transmission;
for STEP 7-Micro/WIN, V3.2 and V4.0
6ES7 830-2BC00-0YX0
WinCC flexible 2007 Micro engineering
software; for Windows 2000, XP; 5 languages,
incl. documentation on DVD: single user license
6AV6 610-0AA01-2CA8
S7-200 PC Access V1.0 OPC server software;
for Win 2000, XP, Vista; 6 languages, incl.
documentation on CD; single user license
6ES7 840-2CC01-0YX0
S7-200 PC Access V1.0 OPC server software;
for Win 2000, XP, Vista; 6 languages, incl.
documentation on CD; multi copy license for
15 installations
6ES7 840-2CC01-0YX1
SIWAREX MS weighing module engineering
software; for Windows 2000, XP; 5 languages,
incl. documentation on CD; single user license
7MH4 930-0AK01
SINAUT Micro SC 8 OPC Server for GPRS
communication with S7-200; for Windows
2000, XP; 2 languages, incl. documentation on
CD; single user license (8 remote stations)
6NH9910-0AA10-0AA3
SINAUT Micro SC 64 OPC Server for GPRS
communication with S7-200; for Windows
2000, XP; 2 languages, incl. documentation on
CD; single user license (64 remote stations)
6NH9910-0AA10-0AA6
6NH9910-0AA10-0AA8
6ES7 272-1BA10-0YA0
TD 200 text display, 2 lines with cable (2.5 m)
and mounting accessories, 187.5 kbaud
6ES7 272-0AA30-0YA0
TD 200C text display with custom user
interface, 2 lines with cable (2.5 m) and
mounting accessories, 187.5 kbaud
6ES7 272-1AA10-0YA0
TD 400C text display with custom user interface, 4 lines with cable (2.5 m) and mounting
accessories, 187.5 kbaud
6AV6 640-0AA00-0AX1
OP 73micro, operator panel, 3" pixel graphic
display, configurable with WinCC flexible Micro
6AV6 640-0BA11-0AX0
TP 177micro, touch panel, 5.7" pixel graphic
display, configurable with WinCC flexible Micro
6AV6 640-0CA11-0AX0
Accessories
Battery cartridge
6ES7 291-8BA20-0XA0
Memory cartridge, 64 KB; for program storage,
data logging, and recipes; from CPU ...23 0XB0
6ES7 291-8GF23-0XA0
Memory cartridge, 256 KB; for program storage,
data logging, and recipes; from CPU ...23 0XB0
6ES7 291-8GH23-0XA0
Real-time clock with battery cartridge;
CPU 221/222 from ...23 0XB0
6ES7 297-1AA23-0XA0
Extension cable for expansion modules, 0.8 m
6ES7 290-6AA20-0XA0
PC/PPI cable, RS 232/485 cable for PC/laptop/
modem/etc. to S7-200, max. 187.5 kbit/s,
Multimaster, ASCII, Freeport
6ES7 901-3CB30-0XA0
PC/PPI cable, USB/485 cable for PC/laptop to
S7-200, max. 187.5 kbit/s, Multimaster
6ES7 901-3DB30-0XA0
MPI cable (5 m)
6ES7 901-0BF00-0AA0
TD 100C connecting cable to CPU
6ES7 901-3EB10-0XA0
SITOP smart 24 V/2.5 A (3 A up to +45 ºC)
6EP1 332-2BA10
SITOP smart 24 V/5 A (6 A up to +45 ºC)
6EP1 333-2AA01
SINAUT Micro SC 256 OPC Server for GPRS
communication with S7-200; for Windows
2000, XP; 2 languages, incl. documentation on
CD; single user license (256 remote stations)
SITOP smart 24 V/10 A (12 A up to +45 ºC)
6EP1 334-2AA01
Complete systems
Blank template sheets for the front panel of
the TD 100C (DIN A4, 10 sheets, each with
6 templates, perforated)
Blank template sheets for the front panel of
the TD 200C (DIN A4, 10 sheets, each with
3 templates, perforated)
6ES7 272 1BF00 7AA0
6ES7 272-1AF00-7AA0
Blank template sheets for the front panel
of the TD 400C (DIN A4, 10 sheets each with
2 templates, perforated)
6AV6 671-0AP00-0AX0
SIWATOOL cable for PC/laptop to SIWAREX MS
weighing module
7MH4 702-8CA
Grounding terminal for SIWAREX MS weighing
module, 10 pcs./unit
SIMATIC S7-200 starter box with CPU 222
AC/DC/RLY, STEP 7-Micro/WIN V4.0, PC/PPI
cable (USB/485), simulators and documentation; English
6ES7298-0AA20-0BA3
OP 73micro starter package; OP 73micro,
WinCC flexible Micro 2007, MPI cable (5 m),
HMI manual collection on CD
6AV6 650-0BA01-0AA0
TP 177micro starter package; TP 177micro,
WinCC flexible Micro 2007, MPI cable (5 m),
HMI manual collection on CD
6AV6 650-0DA01-0AA0
6ES5 728-8 MA11
27
Further information …
… about SIMATIC S7-200
on the Internet: www.siemens.com/s7-200
• Command list (Quick Reference Card)
• Tips & tricks
• Demo software
• Free software updates
• Download manuals
… about SIPLUS extreme
on the Internet: www.siemens.com/siplus
– Extended temperature range
– Protection against aggressive atmospheres/condensation
… about SIMATIC HMI
on the Internet: www.siemens.com/panels
… about Micro Automation Sets
on the Internet: www.siemens.com/microset
… about SITOP
on the Internet: www.siemens.com/sitop
Infoservice – by post or fax:
Siemens AG, Infoservice, AD/Z 461
P.O. Box 23 48, D-90713 Fürth
Fax: +49 (0) 911/978-3321
Direct by phone:
You need assistance and are not sure who to contact?
We can assist you with our
Helpline +49 (0) 180 50 50 111
You can obtain technical assistance on the use of
products and systems from Industry Automation
and Drives Technology by calling:
Technical Support
America +1 423 262 2522
Europe +49 180 5050 222
Asia +86 1064 719 990
Siemens AG
Industry Sector
Industry Automation
Postfach 48 48
90026 NÜRNBERG
GERMANY
www.siemens.com/s7-200
Subject to change without prior notice 09/08
Order No. E20001-A1020-P272-X-7600
DISPO 06313
21/12630 MK.AS.S2.S2S2.52.8.12 09085.0
Printed in Germany
© Siemens AG 2008
SIMATIC® is a registered trademark of Siemens. Other
designations used in this publication may be trademarks
whose use by third parties for their own purposes could
violate the rights of the owners.
The information provided in this brochure contains merely
general descriptions or characteristics of performance
which in actual case of use do not always apply as
described or which may change as a result of further
development of the products. An obligation to provide
the respective characteristics shall only exist if expressly
agreed in the terms of contract.