sta.cz - Finsecpro

KATALOG 2010
®
DASTA
SINCE 1991
Nylon Holsters
Duty Equipment
Hunting Accessories
USV
®
nylon holsters and accessories
sport-profi-hunting
Notice for the users
DASTA products are made with the use of high technology and long-term knowledge in this area with following
development trends not only in Europe but also in the
world. Technical level and the usability of arm holsters,
accoutrements, and accessories used in arm forces, fulfill the requirements for duty accessory.
Material and production technology
DASTA products are made from nylon water-repellent
material having high resistance against chafing. Holsters for handguns are produced using “trilaminate” or
“sandwich“ technology. The “Trilaminate” is a double-side
laminated foam epithelium “POLYFOAM” with upper material based on polyamide fibrous of “Cordura” type, and
with inner material on a micro-velour basis. POLYFOAM
is a foam epithelium with closed cell structure not absorbing water.
Sandwich is material with individual plies where the foam
epithelium is replaced by the form permanent material
with high density polyethylene PE 950 or PE 750 in different thickness and rigidity level – first of all for duty
holsters, or for accessories. The inner material – based
ona micro-velour, is usually laminated with 2 mm foam
ply. Majority of material used for production has the ISO
9002 Certificate for quality check.
Treatment and products service
Products dont need any special treatment. Heavy dirty
can be removed by brush and rubber wet out in common detergent. Holster can be then left to become dry
in a temperature around 40 oC. Dirty Velcro fastener
or the damaged press rivet closures can be removed.
By duty holsters, where the removable screw caps are
used, it is necessary to check on regular basis their
firmness.
Assembling of arm holsters and accessories
DASTA products create complete collection and it allows
to put together any duty belt or shoulder set according
to the need. Shoulder set can contain vertical, horizontal, combined, or break-out shoulder holster and particular balance weights, or plastic standard or multi-function
balance weight. Shoulder sets can be completed as one-side or both-sides sets with cross hinge KZ 40 or KZ 30
(width of belt in mm), with two one-shoulder belts or with
net hinge. Combined shoulder holsters (and even belt
holsters) and break-out holsters are for one side only.
Order number and the system of products marking
Order number (sometimes accompanied by capital letter) mentioned on identification product label in PET package, is composed of the following:
• three places number - producers number marking
basic model
• number behind dash - modification of basic model
– for gun holster means type of gun; for accessories
it means different models or their size in one set (e.g.
hand-cuffs holster, etc.);
• letters after slash mean the following:
“O” – both-sides holster
“KZ 30” cross hinge and its width in mm
“KZ 40” cross hinge and its width in mm
“SZ” net hinge for both shoulders
“TZ” tactical hinge
“TZ-A” tactical hinge + narrow cover holster lappet
“TZ-B” tactical hinge + bride cover holster lappet
“S” steel clip
“V” Velcro fastener
“P” POLICE
“SC” SECURITY
“p” accessory UTONU
Innovation and new products
Continuous replacement of the used foam epithelium
through new foam epithelium POLYFOAM 5050 having
lower level of frothing, it brings higher firmness and shape stability of nylon holsters. Replacement of press rivet
knobs through products from abroad, having guaranteed press firmness at least 4kp, improves the security
for holster use. Increased use of “sandwich” technology brings higher firmness and resistance first of all for
accoutrement and accessories for professional armed
units. It allows also creation of new models for whole-cover holsters of the PREMIUM line connecting good characteristic of leather and nylon arm holsters. In recent
years we have strived hard to bring in some innovations
and DASTA-LOCK casing improvement with an automatic safety locking system which is a Czech copy-right protected utility design No. 14038 to have been registered in 2003. The redesigned DASTA-LOCK system is an
elementary platform to the initial Czech plastic casings
with a uniformed profile shell and brand new and original
properties designated PLASTIC HOLSTER DASTA-LOCK
which had been presented in 2006 for the first time.
Total new for 2010 is the U S V – Universal frameless
tie basic bearing element for a support systém of brand
new design and properties. CZ pat. PUV 2009-21598.
Information for the users
All firearms if improperly and carelessly handled are potentially dangerous to life and health.
Before the use of the gun and the holster, we recommend to read these safety precautions carefully and observe the rules herein contained:
1. Use only the holster designed by the producer for the
particular gun model (per designation on the label).
2. Use the holster in the way as recommended by the
producer (as belt, shoulder or concealed holster).
Concealed holsters are designed to be carried inside-the-pants in such a way that the clip of the holster
catches the belt.
3. Try every new holster and by holstering take care that
it goes smoothly and it doesn‘t come to any unwanted
or inadvertent move or shifting of any part of the gun
(hammer, slide, etc.).
4. Don‘t carry the gun in the holster with round in the
chamber.
5. Always keep your finger OFF the trigger when drawing
and holstering.
6. NEVER HOLSTER A COCKED HANDGUN.
7. Make the fastening of the holster by setting the VELCRO strap in an individual way according to the need
(according to gun type) in such a way that the gun is
firmly holstered in a secure way and protected against accidental loss.Riveted snap fasteners must be
closed in a parallel way against each other (on the
side closure but not on its back side).
8. Exchange any damaged riveted snap fasteners or
Velcro straps if necessary.
9. Use securing strap with holsters having dual retention.
TA B L E O F C O N T E N T S
B e l t H o l s t e r s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 10
S h o u l d e r H o l s t e r s . . . . . . . . . . . . . . . . . . . . . . .11 - 15
Balance Weights
Vertical
Thumb-Break
Horizontal
Combinet
Sport
One-Side
Ambidextrous
Moulded
Concealment
Specialt y Accessor y Cases...........16-17
Transport Cases
Purse / Etui
Pistol holsters with laser and light
Holsters with Auto Security System
Belt holsters
Tactical holsters
Military holsters
Tactical slings
Duty Accessories.............................................26-30
Profi
Duty Holsters......................................................18-29
Mace/pepper spray holders
Key ring holders
Baton holder
Magazine pouches
Handcuffs pouches
Radio and flashlight pouches
Duty cases for documents
Earrings pouches
Duty belts
Duty Outfit and Accessories.........36-38
Hunting Accessories.........................................39-42
Lov
Tactical Bag for Protective Mask
Shooting Case
Tactical Vests
Shooters Vest
Gun Maintenance Kit, Ammo Cases
Hunting Ammunition Belts
Hunting Guns Transport Cases
Rifle Slings
3
®
DASTA sport
Wn
E
N sig
de
0
1
20
®
4
nylon holsters and accessories
sport-profi-hunting
B E LT H O L S T E R S
mod. 263
Belt Side Holsters
Simple and practical belt holsters for pistols and revolvers
Produced with loop for the belt that is a part of the holster's
shell, or with a belt loop (Mod.204, 205), or with steel clip
(Models marked by the letter S)
One-piece or two-piece closure with riveted snap fastener
adjustable in length using VELCRO strips
Sport
Belt Side Holsters
mod. 622
mod. 207
207
Pi Walther PPK
263
Pi CZ 45/92
263/S with steel clip
mod. 293
622
KEVIN
622/S with steel
clip
mod. 264-1
293
293/S
2” revolver
with steel clip
264-1
3” revolver
264-1/S with steel clip
mod. 205
205-1
Pi BERETTA 92, GLOCK 17
SIG P-226, Pi CZ 75/85
Colt M1911, BROWNING GP DA9
205-1/S with steel clip
mod. 264
264
264/S
4” revolver
with steel clip
mod. 626
mod. 204
204-1
204-1/S
204-2
204-2/S
Pi CZ 50/70, Walther PP/PPK
with steel clip
Pi CZ 82/83, Makarov
with steel clip
626 revolver 6”
5
B E LT H O L S T E R S
Ambidextrous Belt Holsters
Two Loops
Ambidextrous Belt Holsters - 2 Loops
Very popular belt holsters comfortable to use with either hand
Two belt loops provide maximum stability on the belt
Three sizes - small (201), medium (202), and large (203) - each
of them delivered to fit several types of handguns
Provide very secure fitting and carrying of the handgun
Double closure with riveted snap fastener adjustable in length
and size of compartment using VELCRO strips allowing if
necessary handgun retaining over the grip
mod. 201
201-1
201-2
201-3
201-4
201-5
Ambidextrous Belt Holsters
with Two Loops and
Intergrated Magazine Pouch
Pi CZ 45/92
CZ 50/70, Walther PP/PPK
CZ 82/83, MAKAROV
CZ 75/85, CZ 75 D Compact
Rev. 2 - 3"
mod. 201/Z
201-6/Z
CZ 2075 RAMI,
GLOCK 36/39,
Walther P 22, HK P7/M8
mod. 202
202-1
202-2
202-3
202-4
202-5
Pi CZ 50/70, Walther PP
CZ 82/83, MAKAROV
CZ 75/85, CZ 75 D Compact
2,5-3" revolver
Walther P 99, HK-USP,
SIG P-228, CZ 100, CZ G-2000
GLOCK 17
202-1/Z
202-2/Z
202-3/Z
202-5/Z
Pi CZ 50/70, Walther PP
CZ 82/83, MAKAROV
CZ 75/85, CZ 75 D Compact
Walther P 99, HK-USP,
SIG P-228, CZ 100, GLOCK 19
Pi CZ G-2000,
mod. 202/Z
mod. 203
mod. 203/Z
203-1
203-2
6
Pi CZ 75/85, GLOCK 17, BERETTA 92
SIG P-226, BROWNONG GP-DA9
Colt M1911
universal – 5" pistol/4" revolver
203-1/Z
Pi CZ 75/85,CZ 97 B, GLOCK 17, BERETTA
92, SIG P-226
BROWNING GP DA9
B E LT H O L S T E R S
Ambidextrous Holsters
with One Loop
mod. 296
Ambidextrous Holsters with One Loop
Sport
Simple shape belt holsters for pistols with the 5" barrel length and
4" revolvers
Two-piece quick fastening with riveted snap fastener having
adjustable length using VELCRO strips
Belt loops on both sides of the holster for the belt 5 cm wide
Comfortable use for both right and left handers
mod. 296/Z
296
mod. 627
mod. 296-1/Z
296-1/Z
296/Z
Pi CZ 75/85, Colt M1911
BERETTA 92, SIG P-226
BROWNING GP DA9
with magazine pouch
627
revolver 4"
Multivariable Belt Holster
SIG P-228,SIG-PRO
HK-USP, WALTHER P-99
Multivariable Belt Holster
Ambidextrous, comfortable use with either hand
Maximum variability of the use allowing 6 positions of holster
carrying with gun on the belt (see Fig. 1)
Double-shell of the holster covers the closure
Two-piece quick closure adjustable in length and site using
VELCRO strips allow retaining of the gun over the grip.
Closure is provided by removable dual retention provisions
Separate instruction manual
mod. 298
298-1
Pi CZ 75/85, CZ 100, GLOCK 17/19
SIG P-226/228, BERETTA 92 BROWNING GP
DA9, Colt M1911
1
fig. 1
5
2
3
4
7
B E LT H O L S T E R S
Fully Covered Belts Holsters
Belt full-cover holsters
full-lamella holster with fastening belt being part of holster cover
connect good characteristic of leather and nylon holsters
rigid with shape stability
produced by the “sandwich” technology of three-layers material
with inter reinforcement from shape stable material both-sides
textile laminated
mod. 209
mod. 284
284 univerzal - Pi 5" / revolver 4"
284-1 Pi SIG P-2022
mod. 266
Fully Covered Holster PREMIUM
209
209-M
2,5-3" revolver (6 shot)
2,5-3" revolver (5 shot)
mod. 665
665
PI CZ 75DC, CZ 75/85,
BERRETA 92
665-1 Pi GLOCK 17/19, SIG P-226/228
266
revolver 4"
mod. 630
mod. 630/PV
630-1/PV
630-2/PV
8
630-1
Pi CZ 2075 RAMI, CZ 75/85
CZ 75 DC, CZ 75 SP-01,
630-2
GLOCK 36/39
Pi SIG P-226/228
279 univerzal Pi CZ 82/83, CZ 75/85,
rev. 2-2,5”
Pi CZ 75/85, BROWNING GP
DA 9 SIG P-226/228 BERETTA
92
Pi CZ 100, CZ G-2000 GLOCK
17/19,
HK-USP, Walther P-99
mod. 279
B E LT H O L S T E R S
mod. 208
Moulded Belt Holsters
Much-favoured belt holsters, their external side is moulded in
such a way so as to create space between the body and the
holster for quick drawing, esp. re-holstering of the gun
Two belt loops secure maximum stability for carrying the gun in
the holster
Double quick-fastening with adjustable length
208-1
208-2
208-3
Pi CZ 75 D Compact
Pi CZ 100, CZ G-2000, GLOCK 19
Walther P-99, SIG P–228, HK-USP
Pi CZ 82/83, MAKAROV
Sport
Moulded Belt Holsters
mod. 206-2
mod. 206-1
206-2
Pi CZ 75/85, CZ 75 SP-01,
BROWNING HP, COLT 1911
Grand Power 100
206-1 Pi CZ 75D Compact, CZ 82/83, SIG
P-226/228, GLOCK 17/19
mod. 631A
631A-1
Pi CZ 75/85, CZ 75 SP-01,
BERETTA 92, GLOCK 21,
Grand Power 100
mod. 631
631-1
631-2
Pi CZ 75 D Compact
Pi CZ 100, CZ G-2000, GLOCK 19,
HK USP, SIG P -558, Walther P-99
9
B E LT H O L S T E R S
Inside-the-Pants Holsters
Inside-the-Pants Holsters
Designed for concealed carry of the handgun
Being carried at the inside of the pants belt in such a way that the
holster clips on the belt
Slip-on or permanently riveted clasp from the very high quality
spring steel in black or white finish
Inside-the-pants holsters for small pistols and revolvers having 2"
barrel length with gun being secured by VELCRO strips
200
210
211-1
211-2
212-1
212-2
212-3
213-1
213-2
213-3
257
Pi CZ-KEWIN
Pi CZ 45/92
Pi CZ 50/70 Walther PP/PPK
Pi CZ 82/83, MAKAROV
75/85, Colt M1911
BROWNING GP DA9
CZ G-2000, BERETTA 92, GLOCK 17/19,
Walther P-99,
SIG P-228/226, HK-USP
Pi CZ 75 DC, HK-USP
2,5-3" revolver (large frame)
2,5-3" revolver (small frame)
2" revolver
universal - 5" pistol / 4" revolver
Pi GLOCK 17/19, SIG P-226/228
HK-USP, Walther P-99
CZ G-2000
mod. 210
mod. 200
mod. 212-3
mod. 213-3
mod. 211
mod. 212
mod. 213-1
mod. 213-2
Fig. 1
mod. 257
10
SHOULDER HOLSTERS
Balance Weights
Balance Weights
Sport
Are enclosures for spare magazines pouches, handcuffs or other accessories
These together with shoulder holster make the shoulder rig set
Individually available for holsters with cross-rigs (designation KZ); for holsters with
one shoulder rig are delivered including shoulder harness and connecting module
with shoulder holster
Plastic balance weight with belt fastening strip is available as standard item for
shoulder holsters with cross-rig standard
Balance weights belonging to 622 and 254 model lines are ambidextrous with easy
positioning
Multi-function balance weight 645 makes possible to fix any accoutrement
accessories DASTA with belt loop in vertical or horizontal position
Multi-function balance weight 645 makes possible connection of two balance
weights and fixing of two accoutrement accessories below each other
Multi-function balance weight rotating 360 degrees; it is possible to fix it to oneshoulder attachment or cross attachment KZ-30 and KZ-40 mm
mod. 222
222
222/KZ
Balance weight positional
with integrated pouch for magazine
having one-shoulder rig
for cross-rig
645
645/KZ
Standard plastic balance weight
of the cross-rig
Balance weight plastic
positionable multi-function
with one-shoulder attachment
for cross-rig
mod. 645
mod. 254
360°
mod. 253
254
254/KZ
Balance weight positional for
two magazines
with one-shoulder rig
for cross-rig
253
253/KZ
Balance weight combined for
handcuff + magazine
for cross-rig
11
SHOULDER HOLSTERS
Vertical Shoulder Holsters
Vertical Shoulder Holsters
Designed first of all for carrying of large pistols with the 5"barrel length
and revolvers with the 4"-6"-8"barrel length
Vertical shoulder holsters come with cross rigs (designation KZ) as
ambidextrous holsters, or as one shoulder rig single sided or as bothsides holster (designation O) for ambidextrous application
Holsters have single-piece closure using VELCRO strips, or quick closure
with riveted snap fastener
mod. 635/O
mod. 215-1/KZ
mod. 215-1
mod.
215
One-shoulder
JRZ
214-1
214-2
214-3
215-1
216
256
623
635
215-2
216
256
623
635
214
262
262
One-side
Vertical Shoulder Holsters
Hinge
One-shoulder
Cross
JRZ/O
KZ
214-1/O
214-1/KZ
214-2/O
214-2/KZ
214-3/O
214-3/KZ
215-1/O
215-1/KZ
215-2/O
216/O
635/0
215-2/KZ
216/KZ
635/KZ-30
Handguns
Pi CZ 82/83, MAKAROV
Pi CZ 50/70, WALTHER PP
Revolver 2,5"
Pi CZ 75/85, BERETTA 92
Colt M1911, SW m.59
BROWNING GP DA 9
Revolver 4"
Revolver 6"
Revolver 8"
Pi CZ KEWIN
CZ 75D Compact,
SIG P-228, GLOCK 19
CZ 45/92
Ambidextrous
mod. 623
mod. 215-2
mod. 214
mod. 216/0
12
SHOULDER HOLSTERS
Thumb-Break Shoulder Holster
Combines advantages of carrying a gun with longer barrel in a vertical position
and option for quick drawing from horizontal position
Delivered for pistols with the 5" barrel length and revolvers with 4" barrel
Leather quick-closure with riveted snap fastener is opened by forward twitch
while grasping the gun by the grip
Anti-rocking safety of the closure is formed by half-circle perforation around the
patent fastener
Two-piece shoulder holster having upper part reinforced with
non-deformable material
Sport
Thumb-Break Shoulder Holster
2x one-shoulder rig
JRZ
cross rig
KZ 40
mod. 249/KZ
249
249/KZ
Thumb-break shoulder holster with
one-shoulder rig for
4" revolver
with cross-rig
cross-rig
KZ 30
Holster Premium Line
656
656/KZ-40
656-1
Shoulder holster vertical
Pi CZ 75/85, BROWNING
BDA GLOCK 17,
WALTHER P-99
cross hinge
BERETTA 92, SIG P-226,
HK-USP
mod. 250
250
mod. 656
250/KZ
Thumb-break shoulder rig with oneshoulder rig for the CZ 75/85,
BERETTA 92
with cross-rig
13
SHOULDER HOLSTERS
Horizontal Shoulder Holsters
Horizontal Shoulder holsters
Designed for medium and larger size pistols and for revolvers with the barrel
length 2", 2.5-3", 4"
Delivered with one-side rigs as one-side or ambidextrous holsters
(marking O), or cross-rig (marking KZ-30)
Two-piece closure adjustable in length using VELCRO strips for all models of
holsters designed for pistols and provided with dual retaining of the gun
mod. 632/KZ-30
632/KZ-30
Shoulder holster horizontal - ambidaxtrous
Cross-rig
Pi CZ 75/85, CZ 75D Compact,
SIG P-226/228,GLOCK 17/19,
HK-USP,BERETTA 92
BROVNING BDA
632/O
one-side attachment
mod. 251
Shoulder holster horizontal
Pi CZ 82/83, Makarov
14
mod. 628
Shoulder holster horizontal
2" revolver
mod. 280/0
Shoulder holster horizontal - ambidextrous
Pi CZ 75/85, Colt M1911,
SW Mod. 39/59, BROWNING GP DA9
280/KZ-30 cross-rig
mod. 282/0
Shoulder holster horizontal - ambidextrous
2,5-4" revolver
282/KZ-30 cross-rig
mod. 281/0
Shoulder holster horizontal - ambidextrous
Pi BERETTA 92, SIG P-226/228
HK-USP, Walther P 99, CZ G-2000
281/KZ-30 cross-rig
SHOULDER HOLSTERS
Shoulder Holsters Horizontal - Combined
(shoulder and belt)
Shoulder Holsters Horizontal - Combined
Sport
Shoulder holsters with option to be carried on the belt (see Fig. 1)
Always supplied with one-side rig harness only as one-side holsters either for
left or right hand use
Produced in two basic models for pistols and two models for revolvers
differentiating only in size
Two-piece closure with riveted snap fastener having adjustable length using
VELCRO strips
For pistol holsters, provided by dual retention of the gun
Very popular and practical model
mod. 633
633
Shoulder holster horizontal - combined
Pi CZ 75/85, CZ 75D Compact,
SIG P-226/228,GLOCK 17/19,
HK-USP.BERETTA 92,
BROVNING BDA
633/KZ-30
cross-rig
mod. 219
Shoulder holster horizontal - combined
219
Revolver 2,5 - 4“
(6 shot)
219-1
Revolver 2,5 - 4“
(5 shot)
219/M
Revolver 2“
(5 shot)
mod. 218
Fig. 1
Shoulder holster horizontal - combined
218-1
Pi CZ 75/85, Colt M1911
SW Mod. 59, BROWNING GP DA9
218-2
Pi SIG P-226/228, HK-USP, Pi CZ 100,
GLOCK 17/19, BERETTA 92
Walther P-99
218-3
Pi CZ 82/83, MAKAROV
218/M
Walther PP/PPK, CZ 50/70
15
SPECIALTY ACCESSORY CASES
Transport Cases for Handguns
Purse / Etui Vertical
Transport Cases for Handguns
Three basic sizes - small, medium, large
Serves for safe transport of handguns and their protection
against any damage
Shell is reinforced with non-deformable material, external layer
is water-repellent with resistance against wear-off, plastic foam
inter-lining 10 mm sewed into textile material
Black colour
mod. 269
mod. 229
Belt Purse / Etui Vertical
286-1
small 13 x 19
286-2
large 15 x 22
mod. 286-1
mod. 286-2
mod. 230
Transport Cases for Handguns
229
5" pistols and 4" revolvers
230
percusion revolvers and 6" revolvers
269
2" revolvers and small pistols
mod. 680-1
mod. 680-2
mod. 787
Transport Cases for Handguns
680-1
malé 21x15 cm
680-2
velké 28x19 cm
16
787 Etui for guns vertical
with rig over shouder
SPECIALTY ACCESSORY CASES
Purse / Arms Etui - Horizontal
Serves for handgun concealed carry
Closure with VELCRO strips (Mod. 231) or with zip closure (other models)
allows fast gun use
Ambidextrous version with the haosety to be used both by left- and right
hand
Sport
Purse / Arms Etui - Horizontal
mod. 232
mod. 231
232 Purse/Etui horizontal
with zip-fastener
231 Purse/Etui horizontal
with VELCRO closure
Wn
NE
ig
des 0
1
20
mod. 644
644 Etui for guns CS
mod. 644-1
644-1 Etui for guns CS1
641
641 - 1
mod. 641
Etui for guns horizontal
with zip fastener - large 22x15 cm
small 17x12 cm
mod. 644-P
mod. 642
644-P Etui for guns CS P
with removable marking
642 Etui for guns horizontal
with removable marking
17
®
DASTA
profi
®
nylon holsters and accessories
sport-profi-hunting
PISTOL HOLSTERS WITH LASER
AND LIGHT
mod. 652-M3/M6
mod. 203-M3/M6
652-M3/M6
Duty belt holster
with rubber inside-lining
Pi CZ 75 D Compact with module M3/M6
GLOCK 17
with module M3/M6
203 M3/M6
Belt holster
for Pi with modul M3/M6
mod. 651/TZ-M3/M6
mod. 652/TZ-M3/M6
mod. 652-1
652-1
Belt holster
for Pi with modul M3/M6
and Taser M 26 EMD
Profi
652/TZ-M3/M6 PROFI-TACTICAL
with rubber inside-lining
Pi CZ 75 D Compact
with module M3/M6
GLOCK 17
with module M3/M6
A
B
mod. 657 MFU/TZ
CAMO
651/TZ –M3/M6 TACTICAL
Pi CZ 75/85, CZ 75 DC with modul M3/M6
Bey removal of two screws easy changet for: Pi GLOCK 17 with modul M3/M6
Pi with laser and tactical light
TASER M 26 EMD/ X 26 EMD
mod. 815
815
belt holster for
modul M6X
657 MFU/TZ
Multifuncional tactical holster - universal
814
belt holster for
modul M3X
mod. 814
19
AU T O S E C U R I T Y S Y S T E M
DLB
®
DASTA – LOCK BLOK
720 DLB duty belt and tactical holsters
720-1 DLB
„compact“
for compact pistols
2TZ
Tactical hinge
whith 2 strips
720 DLB
„standard“
for pistols with 5“ barrel
anatomic shaped locking press button
blocation of tle locking press button
locking press button
cover-shield
horizontal moving bar
720 DLB/TZ
Tactical
distance cube
Série 720 DLB DASTA – LOCK BLOK duty belt and tactical holster
model 720 DLB
model 720 DLB/TZ
belt
tactical
720 DLB 10 (mm)+
720 DLB 10/TZ
720-1 DLB 10
720-1 DLB 10/TZ
720 DLB 12
720 DLB 12/TZ
720 DLB 14
720 DLB 14/TZ
720-1 DLB 14
720-1 DLB 14/TZ
720 DLB 16
720 DLB 16/TZ
720-1 DLB 16
720-1 DLB 16/TZ
+ width of the lock (according to the width of the gun trigger protection)
20
pistole
CZ 75/85, CZ 75 SP-01, COLT 1911
CZ 75 DCompact
BERETTA 92
SIG P-226
SIG P-228, SIG P-2022
GLOCK 17, HK-USP
GLOCK 19, WALTHER P-99
AU T O S E C U R I T Y S Y S T E M
730 DLB
holsters for concealed carrying
DASTA- LOCK BLOK
Auto security system
1. automatic locking when handgun is holstered
2. lock posibility of the safety locking press haos
3. safety placed outside the etui naturally reachable and easy accessible with the
index finger of the shooting hand
4. placement of the unlocking press haos excludes complicated use or unpossible
function of the safety, e.g. covering by the suit
5. the unlocking press buton cover protects safety against unvoluntary movement
6. suitable width and anatomic haose the unlocking press buton leads the index
finger of the shooting hand out off tle trigger and makes possible the safe and easy
manipulation with the safety even for people with short or thick fingers
7. till three independent duty holster safety can be made off at the same time by big
and index finger of the shooting hand
8. system of independent safety makes possible to haose the level of the gun safety
in the holster from one to three
Profi
730-1
Holster for compact pistols
730 DLB
Holster for standart pistols 5“
Pic. 1
Locking press button easy manipulated by natural movement
of the shooting hand index finger by handing of the gun
Série 730 DLB DASTA – LOCK BLOK holsters for concealed carrying
model 730 DLB
model 730 DLB/OZ
model 730 DLB/ Pd
fixed lo
turning loop
„padle“
730
DLB 10 (mm)+ 730
DLB 10/OZ
730
DLB 10/Pd
730-1 DLB 10
730-1 DLB 10/OZ
730-1 DLB 10/Pd
730
DLB 12
730
DLB 12/OZ
730
DLB 12/Pd
730
DLB 14
730
DLB 14/OZ
730
DLB 14/Pd
730-1 DLB 14
730-1 DLB 14/OZ
730-1 DLB 14/Pd
730
DLB 16
730
DLB 16/OZ
730
DLB 16/Pd
730-1 DLB 16
730-1 DLB 16/OZ
730-1 DLB 16/Pd
730-M DLB 10
730-M DLB 10/OZ
730-M DLB 10/Pd
+ width of the lock (according to the width of the gun trigger protection)
pistole
CZ 75/85, CZ 75 SP-01, COLT 1911
CZ 75 DC
BERETTA 92
SIG P-226/228
SIG P-2022, HK-USP, HK P-30
GLOCK 17
GLOCK 19, WALTHER P-99
CZ 82/83, MAKAROV, TOKAREV TT-33
21
AU T O S E C U R I T Y S Y S T E M
PH DLB
®
PLASTIC HOLSTER
DASTA – LOCK BLOK
740 PH DLB Plastic duty belts
and tactical holsters
740 PHDLB
„standard“
for pistols with 5“ barrel
740 PHDLB/TZ – I
Tactical with one balance device
740 – 1 PHDLB
„compact“
for compact pistols
740 PHDLB/TZ – II
Tactical with two balance device
2PHTZ-I
Tactical hinge
with 2 strips
Série 740 PH DLB PLASTIC HOLSTERS DASTA – LOCK BLOK plastic duty belts and tactical holsters
model 740 PH DLB
model 740 PH DLB/TZ
belt
tactical
740 PHDLB 10 (mm)+
740
PHDLB 10/TZ
740-1 PHDLB 10
740-1 PHDLB 10/TZ
740 PHDLB 12
740
PHDLB 12/TZ
740 PHDLB 14
740
PHDLB 14/TZ
740-1 PHDLB 14
740-1 PHDLB 14/TZ
740 PHDLB 16
740
PHDLB 16/TZ
740-1 PHDLB 16
740-1 PHDLB 16/TZ
+ width of the lock (according to the width of the gun trigger protection)
22
pistole
CZ 75/85,CZ 75 SP-01,COLT 191,BROWNING HP
CZ 75 Compact, CZ 75 DC - P1
BERETTA 92
SIG P-226
SIG P-228, SIG P-2022, HK-USP, HK P-30
GLOCK 17
GLOCK 19, WALTHER P-99
AU T O S E C U R I T Y S Y S T E M
750 PH DLB
Plastic holsters for concealed cyrrying
PLASTIC HOLSTER DASTA-LOCK BLOK
third generarion holsters
1. original construction with fully new characters of plastic holsters
2. single profile of holster cover – universal for different guns
3. carrying element of the holster – lock DASTA with automatic safety and
distance cube making possible easy change for any gun
4. width of the lock regulated according to the width of the trigger shield for
individual gun type (see the Table)
5. holster modification – for duty or concealed carrying of the gun
6. posibility to block the auto security systém
mod. 750-1 PH DLB
Holster for compact pistols
Profi
Security – Design – Flexibility
750 PHDLB
Holster for standart pistols 5“
attachment turning loop
750 PHDLB/OZ
attachment rotating
turning loop
750 PHDLB/Pd
„padle“
Série 750 PH DLB PLASTIC HOLSTERS DASTA – LOCK BLOK plastic holsters for concealed carrying
model 750 PHDL
model 750 PHDL/OZ
model 750 PH DLB/Pd
attachment
attachment rotating
„padle“
turning loop
turning loop
750 PH DLB 10 (mm)+ 750 PH DLB 10/OZ
750 PH DLB 10/Pd
750-1 PH DLB 10
750-1 PH DLB 10/OZ
750-1 PH DLB 10/Pd
750 PH DLB 12
750 PH DLB 12/OZ
750 PH DLB 12/Pd
750 PH DLB 14
750 PH DLB 14/OZ
750 PH DLB 14/Pd
750-1 PH DLB 14
750-1 PH DLB 14/OZ
750-1 PH DLB 14/Pd
750 PH DLB 16
750 PH DLB 16/OZ
750 PH DLB 16/Pd
750-1 PH DLB 16
750-1 PH DLB 16/OZ
750-1 PH DLB 16/Pd
+ width of the lock (according to the width of the gun trigger protection)
pistole
CZ 75/85, CZ 75 SP-01, COLT 1911
CZ 75 DC
BERETTA 92
SIG P-226/228
SIG P-2022, HK-USP, HK P-30
GLOCK 17
GLOCK 19, WALTHER P-99
23
DUTY HOLSTERS
PROFI Holsters
with Rubber Inter-Lining
mod. 258
PROFI Holsters with Rubber Inter-Lining
PROFI - duty belt holster with
rubber inside-lining
"standard" model
Screwed duty holsters with exchangeable rubber inter-lining moulded according to the gun
type
Very variable modular system with compact basic components
Two basic models differentiating only in the size of the shell; Mod.258 standard (large) for
pistols with barrel 5"length and Mod.260 compact (small) for compact pistols - in a set
with belt or tactical rig (designation TZ)
Moulded belt harness is reinforced with steel stiffener and further provided with VELCRO
strip and adjusting screw preventing any inadvertent shifting of the holster on the belt
Construction of the external plastic reinforcement and the way of mounting the rig, which
is CZ registered patent, makes possible that after a simple change this holster can be
used by both left and right hander
Two-piece quick fastening with dual retaining through securing strip of the closure
Barrel guide
mod. 673/2TZ
673/2TZ Tactical holster for
TASER X 26
mod. 673
mod. 260
PROFI - duty belt holster with
rubber inside-lining "compact"
model
24
model 258
model 258/TZ
for belt
tactical
673 belt holster for TASER X 26
mod. 674
Pistol
258
258/TZ
GLOCK 17
258-1
258-1/TZ
CZ 75/85
258-2
258-2/TZ
BERRETA 92
258-3
258-3/TZ
SIG P-226
model 260
model 260/TZ
for belt
tactical
Pistol
260
260/TZ
260-1
260-1/TZ
GLOCK 19
CZ 75 D Compact
260-2
260-2/TZ
CZ G-2000
260-3
260-3/TZ
HK-USP, Walther P 99, SIG P 228
260-4
260-4/TZ
CZ 82/83
674 Cover flap
TA C T I C A L H O L S T E R S
PROFI - TACTICAL Holster
with Rubber Inter-Lining
mod. 258/TZ
PROFI TACTICAL Case with Rubber Inter-Lining
PROFI - TACTICAL
holster with rubber inside-lining
Profi
Engineered for public order and special response police units
Three basic models:
1. basic set without cover flap
2. set with narrow cover flap A
3. set with wide cover flap B
The cover flap is removable and it is possible to close it with plastic clasp and
this can be fixed in an open position to the tactical rig
Tactical rig with internal plastic stiffener adjustable in length with VELCRO
strips (the stiffener can be made shorter by cutting it off)
Tactical rig ending with separate extension for quick and easy fastening to the
belt
Fixation to the thigh by mounting strip adjustable in length using VELCRO strips
and spring-loaded rubber strip mounted to oval stabilisation base
Standard oval fixation base with one mounting strip can be substituted by
oblong base with two fastening strips
Ambidextrous use either by left or right hander after simple adjustment (wide
cover flap is supplied as standard solely for right-side model only)
mod. 258/TZ-A
PROFI - TACTICAL with rubber insidelining and with narrow flap A
PROFI - TACTICAL with rubber insidelining and with wide flap B
mod. 258/TZ-B
25
TA C T I C A L H O L S T E R S
mod. 535 TZAM
Tactical Hinge
mod. 655/TZ
CAMO
mod. 261/TZ
655/TZ Tactical hinge
multi-functional
535 TZ UM Tactical hinge
U- - MOLLE
261/TZ Tactical hinge
2x magazine
mod. 643/TZ
mod. 643
643/TZ Tactical hinge
PYROCOOL 2
mod. 537 TZM
537 TZ AM Tactical hinge
A - MOLLE
643 belt holster
for PYROCOOL 1
Ankle Holsters
mod. 227/TZ-B
mod. 220
220-1
220-2
220-3
220-4
26
Pi CZ 45/92, CZ 50/70, Walther PP/PPK
2" revolver (5 shot)
2" revolver (6 shot)
Pi CZ KEWIN
TACTICAL holster with rubber inside-lining and flap
227/TZ-B
Pi CZ 75/85, BERETTA 92
227/TZ
No cover flap
227
Belt
227-1
Pi SIG P-228, HK-USP, WALTHER P-99
TA C T I C A L H O L S T E R S
Tactical Holsters
mod. 651/TZ-PARA
Tactical holster with removable flap
228/TZ-C
Pi CZ 75/85, BERETTA 92, SIG P-226
228-1/TZ-C
Pi CZ 75 D Compact, SIG P-228,
HK-USP, Walther P 99
mod. 228/TZ
CAMO
mod. 228/TZ-C
CAMO
Tactical holster with magazine
Pi CZ 75/85, GLOCK 17, BERETTA 92,
BROVNING BDA,SIG P-226,
HK-USP, WALTHER P-99
Tactical holster without flap
228/TZ
Pi CZ 75/85, BERETTA 92, SIG P-226,
228-1/TZ
Pi CZ 75 D Compact, SIG P-228, HK-USP,
Walther P 99
Profi
651/TZ-PARA
mod. 638-1
mod. 638-1/TZ
mod. 638
PROFI – duty belt holster
with rubber inside-lining
638
Revolver 4"
638-1
Revolver 3"
mod. 638/TZ
PROFI – TACTICAL
with rubber inside-lining
638/TZ
Revolver 4"
638-1/TZ Revolver 3"
model 638
model 638
revolver
for belt
tactical
638
638/TZ
4"
638-1
638-1/TZ
3"
27
M I L I TA R Y H O L S T E R S
DASTA Tactical sling
mod. 276
mod. 278
276 Belt holster
for CZ Scorpion
submachine gun
278 Double magazine pouch
with 20 rounds mag. capacity
each for SMG Mod. 61 cal. 7.65 mm
660 Tactical sling SA-61
a. fixed in two points (on the chest)
b. fixed in one point (horizontally along body,
barrel downwards)
b
Multifunctional tactical set
mod. 272 TCC
a
CAMO
A
272 MTS
Multifunctional tactical set
for SA-61 SCORPION
for Pi SCARABEUS
B
C
D
28
272 TCC
Configuration
A
Tactical holster assembly
B
Belt holster assembly
C
Vertical shoulder holster with cross-rigs assembly
D
Tactical shoulder holster assembly for open carrying
M I L I TA R Y H O L S T E R S
mod. 270
CAMO
Military Holsters
Belt holster ARMY
Pi CZ 75/85, BERETTA 92, SIG P-226
GLOCK 17
mod. 270/TZ
A.L.I.C.E. Clip
270/TZ
ARMY-TACTICAL
Profi
270
mod. 538
mod. 274
538 Bandalír
4 magazines, 1 inside,
2 outside pocket
274
Belt holster ARMY-TROPIC
Pi CZ 75/85, BROWNING BDA,
HK-USP, SIG P-226/228, WALTHER
P-99, BERETTA 92, GLOCK 17
Universal tactical sling
661 Universal tactical sling
three points
mod. 541
mod. 542
CAMO
mod. 661
mod.541 SA-58/AK-47
single magazine pouch
mod.542 SA-58/AK-47
double magazine pouch
29
DUT Y ACCESSORIES
Mace/Pepper Spray Holders
Key Ring Holders
613
613
613-1
244
244-1
mod. 240
mod. 246
613-1
244
Key ring holder - iron hook
Key ring holder - plastic hook
Key ring holder
Key ring holder - "bell"
240 Holder - "KASR" CZ-POLICE
246 Mace/Pepper spray holder 33/90 mm
259 Mace/Pepper spray holder - square
259-A/SZ
33/90 mm
259-B/SZ
33/105 mm
259-B-1/SZ
33/110 mm
259-C/SZ
33/145 mm
259-D/SZ
33/160 mm
360°
mod. 646
676 Rotary loop
with position
fixation VELCRO for
expandable baton
ExB 16/21“
646
mod. 676
30
Rotary loop
with position fixation VELCRO
for expandable baton ExB 16/21”
244-1
DUT Y ACCESSORIES
Baton Holders and Rings
Reversible Holder with Position Fixation
Two-piece harness, the back part is created by loop for the belt (5 cm wide) and
the front part has a loop to hold the baton
The baton retention against losing is provided by security strip with riveted
snap fastener over the transverse handle
Both harness parts can be rotated for 360° against each other around the
middle pivot and they can be firmly fixed in a in several positions with four
riveted snap fasteners
The fixation allows to carry the baton in 4 basic positions, i.e. vertical down- or
upwards, or in 30° angle up- or downwards
Rig provides firm and stable fitting suitable for any kind of movement
Profi
Basic position
360°
504 Reversible baton belt holder
with positional fixation for baton
"BONOWI ES 6"
242-1
242-2
Tactical position
360°
Baton holder
242-1
with plastic and fixation ring
242-2
with iron ring (black colour)
mod. 505
505 Rotary loop with positron fixation
Velcro for tonfa A.I.T.O.
Emergency position
31
DUT Y ACCESSORIES
Magazine Pouches
mod. 238-2
mod. 255-1
236
255-1
255-1/S
255-2
255-2/S
297-3
mod. 255-2
mod. 236
mod. 297-3
Magazine pouch with loop, large
Magazine pouch bordered with loop, large
with steel clip
Magazine pouch bordered with loop, small
with steel clip
Magazine pouch univerzal
mod. 238-1
mod. 297-2
mod. 636
mod. 636-1
mod. 297-1
636
297-1 Magazine pouch ARMY with VELCRO loop, large
297-2 Magazine pouch ARMY with VELCRO loop, small
268 Universal double magazine
pouch
32
261-1 Double magazine pouch
bordered
636-1
Magazine case reinforced – small
CZ 75 DC POLICE CR
Magazine case reinforced – large
261 Double magazine pouch
675 Baton for
case-holder+knife
DUT Y ACCESSORIES
mod. 238-3
mod. 238-8
mod. 238-7
Handcuff Pouches
238-7 Hinge for demonstration chains
238-8 Handcuffs pouche
mod. 238-6
mod. 238-5
238-6
Double handcuffs pouche
(handcuffs + latex handschuh + key)
mod. 238-4
mod. 245-2
245
245-1
245-2
Radio pouches for MOTOROLA
GP 300, P 110
Radio pouches for MOTOROLA
GP 300, P 110
Universal radio pouches
MOTOROLA ATS 2013 MX 3010
Profi
Radio Pouches
Flashlight Holder
mod. 245
mod. 245-1
mod. 606
mod. 242-2
242-2
mod. 259E4
mod. 640
640
606
Flashlight case-holder
MAG LITE D-cell
Flashlight ring
MAG LITE C-Cell
with iron ring
Case for battery
MINI MAG LITE
33
DUT Y ACCESSORIES
Belt Keepers
Cases for Elektro-paralyser
mod. 243-1
243-1
mod. 271-A
mod. 271-B
mod. 271-C
271
271A
271B
271C
Belt nylon keeper
Cases for elektro-paralyser
small
middle
big
Duty Cases for Documents
mod. 235
mod. 637-1
mod. 637
mod. 235-1
mod. 637-2
Small case for documents
235 small,
10 x 14 cm
235-1 small horizont. 10 x 14
637-1 middle,
12 x 18 cm
637
big,
14 x 20 cm
637-2 midle horizont. 12 x 18 cm
34
mod. 800 A
mod. 800 B
Small case for documents A6 12x17 cm
with internal division guichet
800 A with bag lock
800 B with two fasteners
DUT Y ACCESSORIES
Shooting Case
405 Shooting Case
Very practical double compartment case
for transport of handguns and shooters
accessories
External package with several pockets
with two handles for carrying in the hand
and with the sling to be carried on the
shoulder
Internal removable case constitutes solid
shell featuring separate compartments
for four guns in total divided in two
independent pockets located at walls on
both side
Possibility to place shooting accessories
in the middle of the internal compartment
that can be divided by moveable partition
using VELCRO strips into several sections
including individual loops for magazines
Water-repellent KORTEXIN material with
high resistance to be worn off
Black colour
mod. 405
Profi
Handschuh rig
mod. 247-1
CAMO
mod. 681-1
mod. 681
Handschuh rig
681
rig with buttons
681-1
Velcro rig
mod. 247-1p
mod. 247-1p/TZ
PARA – Etui for duty knife
247-1
without accessory
247-1p
with accessory
247-1p/TZ tactical
Tactical Bag for Protective
Mask
Double Latex Glove Wallet
mod. 701
621 Double latex glove
pouch
mod. 621
701
Tactical Bag for Protective Mask
horizontal
35
DUTY OUTFIT AND EQUIPMENT
Tactical Vest
mod. 639
Tactical vest - universal system
639/P assembly POLICIE
654
7
Neck-cloth reinforced
Etui for mobile phone
805 mobile phone 10 cm heigh
806 mobile phone 12 cm heigh
1A
8
2
1
3
6
659
9A
4
Jockstrap
9
10
5
11
TACTICAL VEST 639 UNI
MĚSTSKÁ
Description-set: (standard model - 15 parts)
1.
Big pocket for documents
2. Loop for battery MINI MAG LITE
3. Etui for magazine
4. Etui for magazine
5. Multi-utility case (tear gas, telescope baton, multifunctions pincers)
6. Multi-functions big pocket
7.
Etui removable for transmitter MOTOROLA
GP 300 (P-110)
8. Small pocket for personal properties
(mobile phone)
9. Pistol case standard model for CZ 75 DC,
CZ 75/85, SIG P-226/228, BERETA 92, HK-USP
9A Flat pocket
10. Holder baton
11. Loop for baton (battery MAG LITE C-Cell/D-Cell)
12. Back pocket left-side for transmitter
and spare battery
13. Hand-cuffs case
14. Multi-utility case (tear gas, telescope baton,
multi-function pincers)
15. Back pocket right-side
POLICIE
12
14
mod. 620
15
15
6
13
Size
L
Distrikt of chest
90-103 cm
Height
160-175 cm
XL
103-110 cm
175-185 cm
XXXL
115-125 cm
185-195 cm
620 Belt case
for gas grenade
36
DUTY OUTFIT AND EQUIPMENT
USV
®
UNIVERSAL FRAMELESS TIE
CZ PUV 2009 - 21598
W
NE
0
1
20
•USV
is the basic bearing element for a support system
of brand new design and properties
•USV
Profi
is formed by self-supporting textile strips, folded,
tied and sown in a way that it creates a coherent
textile surface with integrated vertical and
horizontal loops.
•USV
bearing components have regular square or
rectangular shapes and are fitted with fixed and
adjustable linking elements.
USV - NS4
•USV
bearing components can be used individually or
linked together to form suitable support systems
536/TZ USV Tactical panel USV
37
DUTY HOLSTERS
Duty and Garrison Belts
234-1/TAV Duty double-belt 50/1200 mm
with steel loop and internal VELCRO strip
mod. 234-1/TAV TACTICAL
234-1/V Duty double-belt 50/1200 mm
with double security through VELCRO strip
and plastic buckle with internal VELCRO strip
mod. 234-1/V POLICE
601-1/V Duty double-belt 50/1200 mm
with internal VELCRO strip
plastic buckle and two plastic loops
mod. 899
mod. 601-1/V SECURITY
899 In-side belt 40/1200 mm with VELCRO strip
299 Duty stiffened-belt 50/1200 mm
with plastic buckle
mod. 299 ARMY
mod. 299/V ARMY-OFFICER
233 Sling belt – simple 40/1200 mm
with plastic clip
mod. 233
299/V Duty stiffened-belt 50/1200 mm
with plastic buckle and two belt keepers - bordered
38
Size
Overall belt length
Waist
S
100 cm
77-95 cm
M
110 cm
87-105 cm
L
120 cm
97-115 cm
XL
130 cm
107-125 cm
XXL
140 cm
117-135 cm
®
DASTA
hunting
Hunting Accessories
®
nylon holsters and accessories
sport-profi-hunting
HUNTING ACCESSORIES
Hunting Ammunition Belts - Textile
mod. 309
309
306-3 Hunting shot gun belt with flaps, textile
309-1
309-2
Shot cartridge belt
for hunting ammunition
7 Shot gun cartridges
4 Shot gun cartridges plus 3 rifle cartridges
328 Anti-slippery rifle sling
306-1 Hunting shot gun belt - open top, textile
mod. 328
Rubber lining inside of the belt structure
100 percent fixed position
306-2 Hunting belt - combined (rifle, shot gun) open top,
textile
mod. 329
Textile wide rifle sling
329
Inside with wool textile
329/G Inside with anti-slippery rubber
306-4 Hunting belt combined with pockets
mod. 312
mod. 275
275 Handgun cartridge carrier
(for 6 revolver rounds)
312 Belt ammunition case
for 6 rifle cartridges
658 Shot gun cartridge belt
40
HUNTING ACCESSORIES
Hunting Guns Transport Cases
304 LOV 4
330 LOV 6
Rifle cover, length 120 cm,
colour green or black
TRANSPORT CASE FOR RIFLE WITH OPTIC
plastic foam 25 mm, length 100 cm, colour
green or black
303 LOV 3
331 LOV 7
Transport case for rifle with optic
plastic foam 25 mm, length 120 cm, one
outside pocket, green or black colour
Transport case for rifle with optic
plastic foam 25 mm, length 136 cm, colour
green or black
302 LOV 1
Transport case for dismantled
Shotgun
Inside plastic foam 25 mm
Barrel inside and outside pocket
301-1 TACTIC I
CAMO
301-2 TACTIC II
CAMO
Transport tactical case
Inside plastic foam 25 mm
Length 80 cm
301 TACTIC
CAMO
Transport tactical case
Inside plastic foam 25 mm
Length 80 cm
Suitable also for SA-58 and AK-47
Lov
307 LOV 8
Transport case for rifle with optic
plastic foam 45 mm, length 120 cm, one outside pocket,
green or black colour
Large tactical rifle case with
plastic foam inside-lining width 25 mm,
length 120 cm with 7 outside pockets
41
HUNTING ACCESSORIES
mod. 649
mod. 647
mod. 648
Cartridge stock etui
647
rubber 1/rifle 2/shot gun
648
adjustable 1/rifle 2/shot gun
649
rubber
exchangeable loops rifle – shot gun
649-A
adjustable
exchangeable loops rifle – shot gun
mod. 310
310 Barrel-muzzle cover-universal
(rifle/schot gun)
619-1
Cartridge stock etui - rifle
mod. 311
403 Shooters vest SKEET
Shooters vest
Model
Colour
Size
403 SKEET
blue
L, XL, XXL,XXXL
green
42
Gun maintenance kit case
311-1
Rifle maintenance
kit case
311-2
Shot gun
maintenance
kit case
619-2
Cartridge stock etui - shotgun
619-3
Cartridge stock etui
- combined rifle/shotgun
Dear customers,
www.dasta.cz
Since 1992, DASTA is registered and protected trade mark and today this company is already traditional
Czech producer. Its main activity is concentrated in development, production and sale of arm accessories – first of all nylon holsters for guns, accoutrement and accessories for armed forces together with
accessories for hunters.
DASTA history begins in 1991 with origin of the physical persons association with the trade name Dana
Staňková-DASTA with successful and very dynamic development from very origin. In 2004, this association has been transformed into new originated company DASTA s.r.o. taking over the whole production
program with continuous development. In 2007 new modern premises were open in Prostejov – the
town with a long time tradition in textile and tanning production of Moravian region.
At present time, company DASTA s.r.o. offers for its clients around 300 catalogue items. According to
the complexity and production items, DASTA s.r.o. belongs already several years to the companies with
the most comprehensive offer of this kind in the Czech Republic. Offer creates the whole production collection that is developed in a continuous and in such a way that it will satisfy the needs and requirements
of the widest circle of users as from the civil sector so as from the armed forces.
DASTA s.r.o.
Manufacture:
Svatoplukova 48a,
796 01 Prostějov
Therefore, the company reserves its right to make such changes in the offer that lead to design, function
characteristic improvement, or comfort increase in individual production items` use.
DASTA-sport involves collection of belt and tactical nylon holsters divided into several independent categories – and other arm accessories determined first of all for civil sector but also for armed forces - first
of all for concealed gun carrying.
DASTA-profi involves duty belt and tactical holsters, complete accoutrement items and accessories determined for professional armed forces - first of all for Police, Prison and Customs Service but also for
Community Police or civil security agencies. Users character and technical level of this category correspond with requirements determined for duty accessories and with the use in armed forces. Their quality
is checked by many years use in armed forces of the Czech Republic and abroad. DASTA Ltd. and its
members cooperate closely on their development with many professionals from armed forces, especially
in the framework of IPA (International Police Association) membership.
DASTA-lov (hunting) involves basic hunting accessory and hunters items.
DASTA products are made from top domestic and foreign material incorporating health-safe substances
only. Used material - together with modern way and production technology, together with many years
experience of our workers in this area of production, are the guarantee of high quality, comfort and long
years durability of the whole collection.
The DASTA s.r.o. company exports their products to a number of EU countries through both the direct
clients abroad and the domestic business partners as well as states of Eastern Europe and Asia.
Distribution and sale of company DASTA s.r.o. products is realized in domestic market exclusively through agreement wholesale partners, or through direct products delivery into chosen retail shops in the
whole Czech Republic. Logistics and delivery product service to all individual customers is provided through AIR SOFT (www.airsoftshop.cz) company. Another option how to get a product is logging on to J.G.S.
TRADE s.r.o. (www.jgstrade.cz) internet shop, respectively the company dealing with foreign as well as
domestic wholesale including deliveries to retailers´ store network with guns and munition within Czech
Republic.
The DASTA s.r.o. company appreciates both foreign and domestic business partners and customers´
continuing interests in DASTA branded products which makes it for further extension of our entire products offer by new product line that might be included in the catalogue.
Owing to the fact that the DASTA s.r.o. company releases their catalogues for a period of two years therefore new products shall be seen on www.dasta.cz website.
With kind regards
Dana Staňková
Executive Company
DASTA s.r.o.
®
nylon holsters and accessories
sport-profi-hunting
Distributor
DASTA s.r.o.
Ke Klí�ovu 714/6, 190 00 Praha 9, Czech Republic
Tel.: + 420 2 83880439 Fax: + 420 2 86583402
e-mail: [email protected], www.dasta.cz
export department:
Tel.: + 420 2 51621768 Fax: + 420 2 51611969
e-mail: pragueof[email protected]
© LD studio Uherský Ostroh - design, tel.: + 420 777 750 159
www.dasta.cz