Company Profile

Transcription

Company Profile

COMPANY PROFILE
Rahbord Energy Design & Development
Engineering Co.
TABLE OF CONTENTS
1.
Introduction
…………………………………………
3
2.
EPC Services
…………………………………………
5
3.
Carbon Management Services
…………………………………………
6
4.
Organization Structure
…………………………………………
7
5.
Drafting & Design Expertise
…………………………………………
8
6.
Health, Safety and Environmental
…………………………………………
9
7.
Certificates
…………………………………………
11
8.
Company Experience
…………………………………………
14
9.
Engineering Software List
…………………………………………
36
10.
Office Facilities
…………………………………………
42
11.
Hardware
…………………………………………
43
12.
Contact
…………………………………………
46
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 2 of 48
Introduction
Rahbord Energy was established with Ex-IOOC specialists and very well-experienced personnel in 2000 (officially
2006). We are experts in the field of engineering for the offshore oil and gas industry. We are highly experienced in
creating innovative and cost-effective solutions for the most challenging environments, including harsh environments
and remote locations.
Rahbord Energy offers a broad scope of services in oil & gas industries, both onshore and offshore .With a team of
skilled engineers and experts in various disciplines having experience in different branches of oil and gas industry,
we can provide its clients with extensive services in process engineering, as well as undertaking other engineering
discipline in green & brown filed development projects.
The ultimate objective of Rahbord Energy is promoting and facilitating greater utilization of the local resources in
implementation of oil and gas projects by promoting cooperation with foreign companies interested in Iranian oil and
gas industry and offering best services to meet the requirements of Iranian petroleum industry.
Rahbord Energy provides services in the fields of:
Oil and Gas Industry

Oil and gas fields development

Wellhead and gathering systems

Oil and gas separation plants

Offshore platforms & facilities

Crude oil desalting and treatment

Gas compression and injection

Pump stations

Pipeline transportation systems

Utility systems

Oil refineries

Gas treatment plants

NGL plants

Sulphur recovery plant

Petrochemical plants

Power generation and transmission

Water treatment plants

Clean Development Mechanism(CDM)
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 3 of 48
EPC Services
The company provides the complete range of engineering consulting services to the oil, gas and industrial EPC
projects including followings.These services can be rendered on a solitary basis or in any combination:

Management Contract

Management Consultancy

Management of all Health, Safety and Environmental (HSE) aspects of Projects

Planning and Project Management

Cost Estimation and Control

Production Optimization & Process Selection

Feasibility &Techno-economic Studies

Conceptual Design

FEED Engineering

Detail Engineering

Brown Filed Renovation & Optimization

Procurement Engineering

Construction Management &Supervision

Construction Supervision

Commissioning and Start-up Services

Training
Rahbord Energy’s services include all phases of EPC project development. Its principal efforts include feasibility
studies, engineering design and project management. A feasibility study is a recommendation, based on engineering
analysis, for the best method of development of an industrial project. Evaluations include capital and operational
(CAPEX and OPEX) analysis, potential operational problems and probable economic return for a new venture. Such
studies are recommended prior to the initiation of engineering design.
Engineering design comprises all the technical data required for the enablement of purchase and installation of
equipment as well as the construction of the facilities. Data includes basic and detailed engineering documents and
drawings, specifications, bid documents, contractual obligations and equipment list. Project management extends
project design to encompass material and equipment procurement, expediting, inspection, transportation and
handling at site. It further includes assistance to the client in locating, evaluating, and selecting construction
contractors, contract negotiations, supervision on construction, pre-commissioning and commissioning activities,
operator training and plant start-up/hand-over.
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 4 of 48
For each Engineering and Technical Discipline, Rahbord Energy has in-house departments including:

Project Management

QHSE

Project Control

Process Engineering

Safety Engineering

Mechanical Engineering

Civil Engineering

Electrical / Telecom. Engineering

Instrumentation / Control Engineering

Drafting & Design
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 5 of 48
Within the Clean Development (CDM) market, Rahbord Energy is offering consulting and advisory
services, and bringing together demand and supply of CO 2 Certificates. In this regard, Rahbord Energy
will provide following services to Iranian Clients:

Capacity Building and Training

Assistance with preparation of the Project Idea Note (PIN) and Project Design Document (PDD)

Determination of Baseline Emissions, Project GHG Emissions and Project Emission Reductions

Support during Host Country Approval process, Validation, Emission Reductions Purchase
Agreement (ERPA) negotiations, CDM Registration , Verification, Certification and Contractual
arrangements

Preparation of Annual Monitoring Reports

Training

Carbon Management Strategy &Planning

Carbon Credit Procurement

Commercial Advisory
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 6 of 48
The CDM Project Cycle
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 7 of 48
Organization Structure
Following chart illustrates the structure of the Rahbord Energy Company:
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 8 of 48
Drafting Design & 3D Modeling
We have a Design and Drafting team. The Drafting Department is experienced in all aspects of onshore & offshore
facilities including full grass roots plant design, prefabricated skid packages as well as modifications and expansion to
existing facilities.
Each Drafting workstation is equipped with AutoCAD and PDMS for discipline specific drafting.
The department is set up to deal directly with Clients looking for Drafting Services on an exclusive basis. The
department also works within the multi-disciplinary requirements of larger projects.
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 9 of 48
Health, Safety & Environmental
Rahbord Energy places a strong emphasis on Health, Safety and Environmental aspects based on ISO 14001:2004,
OHSAS 18001:2007&HSE-MS.
We also take pride in customizing project executions to incorporate our Clients corporate HSE requirements.
Rahbord Energy is committed to ensuring that all work and design of facilities for our clients take HSE principles into
account so that our philosophy will translate into operationally safe facilities for all personnel involved in the
construction and operations of the facilities.
Rahbord Energy is pleased to provide further HSE information for specific project opportunities.
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 10 of 48
Certificates

Grade 1 Certificate of competency for Engineering Consultancy of Oil, Gas and
Petrochemical Refineries

Grade 3 Certificate of competency for Engineering Consultancy of Oil and Gas Pipelines

Grade 3 Certificate of competency for Engineering Consultancy of Oil and Gas Surface
Facilities
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 11 of 48
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 12 of 48
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 13 of 48
Company Experiences
Project
IGAT VI (Khoramshahr) Metering & PCS Stations
Client
Iranian Gas Engineering And Development Co. (I.G.E.D.C.)
Financer
NAFTANIR Industrial Project Management Co.
MC
Hirbodan Co.
Engineering Subcontractor
Rahbord Energy
Project Location
Khoramshahr
Capacity
50 MMSCMD
Technical Category
Export Gas Metering & PCS Stations
Services Performed
Detail & Procurement Eng.
Estimated Man-hour
20,000
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 14 of 48
Project
Three Gas Compressor Stations Project on IGAT VI
(Ahwaz- Hosseynieh- Koohdasht)
Client
Iranian Gas Engineering And Development Co. (I.G.E.D.C.)
Financer
NAFTANIR Industrial Project Management Co.
MC
Hirbodan Co.
Rahbord Energy
Project Location
Ahwaz/ Hosseynieh/ koohdasht
Capacity
Three Compressor Station for Pipeline IGAT VI in Ahwaz,
Hosseynieh, Koohdasht with Capacity Around 110 MMSCMD for
Each
Technical Category
Gas Compressor Station
Services Performed
Basic Endorsement, Detail Engineering, Procurement Engineering
Estimated Man-hour
50,000
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 15 of 48
Project
Two Gas Compressor Stations Project on IGAT VIII
(Khonj/Jahrom)
Client
Iranian Gas Engineering And Development Co. (I.G.D.E.C.)
MC
Farayand Sazan (FSEC)
EPC JV
SEKAF/ Rahbord Energy
Project Location
Fars (Khonj-Jahrom)
Capacity
Engineering, Procurement & Construction of two compressor station
for Pipeline IGAT VIII in Khonj & Jahrom with capacity around 110
MMSCMD for each
Technical Category
Gas Compressor Station
Services Performed
Detail Design and Procurement Engineering & As-built Drawing
Estimated Man-hour
40,000
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 16 of 48
Project
Early Production of Band-e-Karkhe Oil Field
Client
PEDEC Co./ Petro Farayand Karkhe
Main Contractor
Gordavaran Farashband Co.
Rahbord Energy
Project Location
Khouzestan/Ahwaz
Capacity
15000 BBLs/day Crude oil Production Plant
3 wellhead Facilities
3 flow Lines for Connecting wellheads to Production Plant
60 km Transmission Pipeline
Non Industrial building Control & Substation
Utility Systems required for Production Plant
Technical Category
Oil Production Plants, Oil Wellheads and Underground Pipelines
Services Performed
Detail and Procurement Engineering & As-built Drawing
Estimated Man-hour
40,000
Project Status
Stopped
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 17 of 48
Project
Front End Engineering Design (FEED) of Nowrooz Offshore Oil
Field Development
Client
IOOC
Main Contractor
Tehran Energy Consultant (TEC)
Rahbord Energy
Project Location
North-western part of The Persian Gulf
1) 2 New Wellhead Platform:
ESP Wells, Wellheads, Wellhead Control Panel, Test Manifold, Test
Separator, Production Manifold, Chemical Injections: Demulsifier,
Corrosion Inhibitor and Anti-foam
2) Modification of Existing NPP& NWP1 Platforms:
Capacity
Crude separation, Crude treatment, Chemical injection distribution, Flare
Header, Open & closed drains, Produced water treatment.
3) Two Subsea Pipeline:
The produced oil from wellhead platform will be transferred to production
platform through a subsea pipeline
4) Two Subsea Cables:
Two power cable will supply power from production platform to the
wellhead platform.
Technical Category
Offshore Oil Processing Platform
Services Performed
1- Basic Design (FEED) Studies
2- Preparation of EPC Documents
Estimated Man-hour
25,500
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 18 of 48
Project
Hengam Gas Treatment Plant (Detailed Design)
Client
IOOC
Main Contractor
Jondishapour Co.
APS Italy / Rahbord Energy
Project Location
Persian Gulf
Capacity
80 MMSCFD Associated Gas including
4 Stages Gas Compression (LLP, LP, MP & HP)
Gas Sweetening Unit (DEA) and Regeneration System
Gas Dehydration & Dew Point Control Unit
Condensate stabilization
Acid Gas Enrichment Unit (12 MMSCFD)
Sulfur Recovery Unit (60Tons/day)
Utility Systems including Steam Generation, Fuel Gas
System, Utility/ Potable/ DM Water Systems, Instrument/
Utility Air System, Nitrogen System, Firewater System,
Flare System and Open & closed Drain Systems
Technical Category
Gas Plants
Services Performed
Detail and Procurement Engineering & As-built
Drawings of Gas Treatment Plant
Estimated Man-hour
100,000
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 19 of 48
Project
Hengam Gas Refinery Offsite Piperack
Client
IOOC
Main Contractor
Jondishapour Co.
Rahbord Energy
Project Location
Qeshm Island
Capacity
Inter connecting Piperacks between Oil Production Plant and
Hengam Gas Refinery.
The Piperacks will transfer all Process, utility & flare lines between
two plants.
The length of piperack is almost 400 meters.
Technical Category
Interconnecting Piperacks
Services Performed
Detailed and Procurement Engineering & As-built Drawings
Estimated Man-hour
4,200
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 20 of 48
Project
Qeshm Oil Production Unit Extension & 20” Oil Pipeline (30km)
Project (FEED & Detailed Eng.)
Client
IOOC
Main Contractor
Saied Sanat Maroon Co.
Rahbord Energy
Project Location
Persian Gulf, Qeshm Island
Capacity
45,000 BPD Oil Separators, Strippers & Heater
200 MMSCFD Associated Gas Flaring
20” Oil Pipeline (30km)
Pig Launching & Receiving Facilities
API Separator
Closed Drain System
Burn Pit
Technical Category
Oil Production Plants
Services Performed
Basic & Detailed Engineering (All Disciplines),Procurement
Engineering, Site Engineering &As-built Drawings
Estimated Man-hour
35,500
Project Status
Almost Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 21 of 48
Project
Top Side Jetty, Propane BOG System and Seawater Intake and
Outfall (Detailed Eng.)
Client
IOOC
Main Contractor
IRITEC/ OmranFalat Co.
Rahbord Energy
Project Location
Persian Gulf
Capacity
4500 m3/hr C3 Loading, 2250 m3/hr C4 Loading
900 m3/hr C5 Loading, 2700 m3/hr C6+ Loading
50,000 m3/hr Seawater
41 tone/hr BOG System Capacity
Technical Category
NGL Plants
Services Performed
Detailed Engineering (All Disciplines), Procurement
Engineering.
Estimated Man-hour
45,000
Project Status
Almost Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 22 of 48
Project
Hengam Gas Refinery (Front End Engineering Design-FEED)
Client
IOOC
Main Contractor
Jondishapour Co.
Rahbord Energy
Project Location
Persian Gulf
Capacity
80 MMSCFD Associated Gas including
4 Stages Gas Compression (LLP, LP, MP & HP)
Gas Sweetening Unit (DEA) and Regeneration System
Gas Dehydration & Dew Point Control Unit
Condensate stabilization
Sulfur Recovery Unit
Utility Systems including Steam Generation, Fuel Gas
System, Utility/ Potable/ DM Water Systems, Instrument/
Utility Air System, Nitrogen System, Firewater System,
Flare System and Open & closed Drain Systems
Technical Category
Gas Plants
Services Performed
Basic Engineering of Gas Treatment Plant,
Detail Engineering of industrial & non-industrial buildings
Estimated Man-hour
20,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 23 of 48
Project
SALMAN Offshore Complex Firewater System Renovation
Project (LavanIsland)
Client
IOOC
Main Contractor
Maroon Sazeh Eng.Co.
Rahbord Energy
Project Location
Persian Gulf
Capacity
---
Technical Category
Offshore Fire Fighting System
Services Performed
Basic & Detailed Engineering (All Disciplines), Site Engineering &
As-built Drawings Drawings
Estimated Man-hour
15,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 24 of 48
Project
Aboozar & Bahregansar Tie-in EPC Project (Kharg Island)
Client
IOOC
Main Contractor
SAEEN Construction Co.
Rahbord Energy
Project Location
Persian Gulf
Capacity
600 MMSCFD Associated Gas
Technical Category
Offshore Oil & Gas
Services Performed
Basic Design Review, Detailed Engineering, Site Engineering &
As-built Drawings
Estimated Man-hour
25,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 25 of 48
Project
Foroozan Renovation &Reconstruction EPC
Project
Client
IOOC
Main Contractor
IOEC-Nardis/ ISI
Rahbord Energy
Project Location
Persian Gulf
Capacity
50,000 BPD Crude
Technical Category
Offshore Oil & Gas (Renovation & Enhancement)
Services Performed
Basic Design Review& Detailed Engineering (Process,
Safety, Electrical &Instrument Disciplines)
Estimated Man-hour
22,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 26 of 48
Project
Qeshm Oil Production Unit New Oil Strippers Project
Client
IOOC
Main Contractor
Saied Sanat Maroon Co.
Rahbord Energy
Project Location
Capacity
55,000 BPD Oil Strippers
Technical Category
Services Performed
Detailed Engineering, Procurement Engineering, Site Engineering &
As-built Drawings
Estimated Man-hour
5,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 27 of 48
Project
Qeshm Oil Production Unit LLP Flare System Project
Client
IOOC
Main Contractor
Gordavaran Farrashband Co.
Rahbord Energy
Project Location
Capacity
LLP Flare System
Technical Category
Services Performed
Detailed Engineering, Procurement Engineering, Site Engineering &
As-built Drawings
Estimated Man-hour
1,200
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 28 of 48
Project
Hendijan Wellhead Platforms EPC Project
Client
IOOC
Main Contractor
ISOICO/JAMM
Rahbord Energy
Project Location
Persian Gulf
Capacity
50,000 BPD Crude oil
Technical Category
Offshore Oil & Gas (Development)
Services Performed
Basic Design Review & Detailed Engineering (Safety Discipline)
Estimated Man-hour
5,000
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 29 of 48
Project
Piran & Tarik HPPCDM Project
Client
Iran Water & Power Resources Development Co.
Consultant
Rahbord Energy &Sazeh pardazi Iran Joint Venture
Project Location
Kermanshah / Gilan
Capacity
8.4MW / 40 GWh – 3.0MW / 16.5 GWh
Technical Category
Hydropower Plants (Small Scale)
Services Performed
PDD Preparation, Assist in Validation, Assist in Host Country
Approval, Assist in Investor Country Approval, Assist in Registration,
Emission Reductions Purchase Agreement Negotiations, Monitoring
of Project Activity and Selling of Certificates
Estimated Man-hour
---
Project Status
Finished (Registered in UN)
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 30 of 48
Project
Bakhtiari HPP CDM Project
Client
Consultant
Rahbord Energy & Sazeh pardazi Iran Joint Venture
Project Location
Khorramabad / Lorestan
Capacity
1500 MW / 3000GWh
Technical Category
Hydropower Plants (Large Scale)
Services Performed
PDD Preparation, Assist in Validation, Assist in Host Country Approval,
Assist in Investor Country Approval, Assist in Registration, Emission
Reductions Purchase Agreement Negotiations, Monitoring of Project Activity
and Selling of Certificates
Estimated Man-hour
---
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 31 of 48
Project
Namarestagh 1&2HPPCDM Project
Client
Consultant
Rahbord Energy & Sazehpardazi Iran Joint Venture
Project Location
Amol / Mazandaran
Capacity
32 MW / 98GWh
Technical Category
Hydropower Plants (Large Scale)
Services Performed
Estimated Man-hour
---
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 32 of 48
Project
Zayandehrood HPP CDM Project
Client
Consultant
Rahbord Energy & Sazehpardazi Iran Joint Venture
Project Location
Esfahan
Capacity
8.5 MW / 38.7 GWh
Technical Category
Hydropower Plants (Small Scale)
Services Performed
Estimated Man-hour
---
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 33 of 48
Project
KAHAK Wind Farm Project
Client
MAPNA Renewable Generation Co.
Consultant
Rahbord Energy
Project Location
IRAN
Capacity
100 MW
Technical Category
Wind Power Plants
Services Performed
Estimated Man-hour
---
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 34 of 48
Project
Kuhin Wind Farm CDM Project
Client
MAPNA Renewable Energies Co.
Consultant
Rahbord Energy
Project Location
IRAN
Capacity
100 MW
Technical Category
Wind Power Plants
Services Performed
Estimated Man-hour
---
Project Status
Ongoing
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 35 of 48
Project
Development of Khazar Oil Fields
Client
NINOC
Main Contractor
KHAKBAFT Co.
Rahbord Energy
Project Location
Caspian Sea (Khazar Sea)
Capacity
400,000 BPD Crude Oil
Technical Category
Offshore Oil & Gas (Development)
Services Performed
Conceptual Design (Process & Plant Layout)
Estimated Man-hour
1000
Project Status
Finished
Project
650# Steam Interconnecting Line Project
Client
Tehran Oil Refining Company
Main Contractor
PART Green Energy Eng. Co.
Rahbord Energy
Project Location
Tehran
Capacity
---
Technical Category
Oil Refinery- Utility
Services Performed
Basic Design and EPC Package
Estimated Man-hour
2,800
Project Status
Finished
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 36 of 48
Engineering Software List
MIS Software
EDMS
CRP
Engineering Document Management System
Office Automation Software
Process& Safety Engineering
Process Simulation
ASPEN HYSYS 2006.5
PRO-II
PROMAX
ASPEN FLARE NET
ASPEN B.JAC
PIPESIM
OLGA
PIPEPHASE
INSTRUCALC
HTFS
HTRI
AFT IMPULSE
FLOWNET
DISTIL
PHAST
Flare Network
Heat Transfer Modeling
Piping Network Simulation
Pipeline Simulation
Instrumentation Calculation
Heat Transfer Simulation
Water Hammer
Flow Network simulation
Distillation Simulation
Fire Risk Analysis
Mechanical Engineering
Design of Pressure Vessels & Towers
Design of Shell & Tube Heat Exchangers
Design of Air Coolers
Design of Storage Tanks
Stress Analysis of Nozzles
General Stress Analysis
AutoCAD
Solid works
AMETANK 7.6
PV ELITE
ASPEN B-JAC
HTRI
TANK
NOZZLE PRO
ANSYS
2010
2011
Civil & Structural Engineering
Analysis-Design of structures
Analysis-Design of buildings
Analysis-Design of Foundations
Civil Works Design
Analytical calculations
Drafting
SAP2000
ETABS
SAFE
CIVIL 3D
MATHCAD
CAD 2010
Electrical Engineering
Analysis-Design
Lighting Design
Analysis-Design
Battery Sizing
Heat Tracing Design
ETAP
CALCULUX, DIALUX
MATLAB
SAFT (WIN Size)
TRACECALC PRO, Computrance
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 37 of 48
Piping Engineering
Modeling
Modeling
Modeling
Modeling / Drafting
Model review
PDMS Drafting
Stress Analysis
Drafting
AUTO PLANT
PDMS
Autodesk Autocad Plant 3D
Cad Worx Plant & PID
Navis works & Review Reality
Plant WAVE
CAESAR II
CAD 2006, 2007 & 2008
Instrument & Control Engineering
Calculation & System Design
Calculation
Fisher Valve Sizing
Orifice Sizing
Safety Valve Sizing
INTOOLS 6
INSTRUCALC
FIRST VIEW
FOXFLOW
VALVE STAR
Project Control Engineering
Planning & Project Control
MICROSOFT MSP + Persian Version
PRIMAVERA INTERPRISE
General
Microsoft Office 2007 SP1
Win XP Professional SP3
Adobe Acrobat Writer 7.0
MS Visio 2003
Auto Cad 2007 & 2008
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 38 of 48
Engineering Document Management System (EDMS)
EDMS logging page including:

Admin

Discipline

DCC

Project control
 Discipline
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 39 of 48
 Master Document Register
 Document Distribution:
 Documents selection
 Discipline selection
 Attachment
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 40 of 48
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 41 of 48
Office Automation Software (CRP)
 Correspondence

Internal

External
 Letters
 Inbox
 Outbox
 Draft
 Archive
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 42 of 48
Office Facilities
2
Engineering office area:
645 m (3 levels)
Tel Line:
Fax line:
6 lines
1 line
Internet
ADSL 7 Mb
Active Network Facilities
Win 2003 Advance Server + Active Directory Service
HP File Server
ISA Server: Internet Service Server
Proxy Server
Antivirus Server: Symantec Corporate Edition Antivirus 10.1.5002 Registered Version
Mail Server
EDMS Server
Office Server
Web Hosting
Hosting:
Website:
Mail Server:
Registered Domains:
May 2016 REDECO
25 Gigabyte Hosted for Web
www.rahbordeng.com
25 Gigabyte
www.rahbordeng.com &www.rahbordeng.ir
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 43 of 48
Hardware
Rahbord Energy uses computers extensively for the performance of engineering design, management
and procurement activities of the projects. At the present time, the hardware facilities include the following
items:
Description
Number Off
COMPUTERS
Pentium IV
56
Notebook
11
HP File, Domain & Mail Servers
4
Total Computers
71
PRINTERS
Bizhab A3/A4 Color
1
Aficio3045 A3/A4
1
HP Laser Jet 5200
1
HP Laser Jet 7103, Color Printer
1
HP Laser Jet P2015d
1
HP Laser Jet 1522
1
HP Laser Jet 2045n
1
HP Laser Jet 2035n
2
HP Laser Jet P2015d
1
Canon 4350
1
Total Printers/Copy/Scanner
11
SCANNERS
Bizhab Color A3/A4
1
Aficio3045 A3/A4
1
HP M1522
1
Canon 4350
1
Total Scanners
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
4
Page 44 of 48
PHOTOCOPY MACHINES
Bizhab Color A3/A4
1
Aficio 3045 A3/A4
1
HP M1522
1
Canon 4350
1
Total Photocopies
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
4
Page 45 of 48
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 46 of 48
Contact
Please feel free to contact Rahbord Energy at any time for further information, by telephone, fax
or email.
rd
Main Office: #19, 53 St.,AsadAbadi St., Tehran, IRAN
Tel:
(+9821) 88065776-9
Fax:
(+9821) 88060801
Email:
[email protected]
May 2016 REDECO
ISO 9001:2008
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 47 of 48
91 ‫ پالک‬،35 ‫ (یوسف آباد) کوچه‬،‫ خیابان سید جمال الدین اسد آبادی‬،‫تهران‬
77585759 :‫فکس‬77853888-1 :‫تلفن‬
May 2016 REDECO
No. 19, 53 St., AsadAbadi St., Tehran, IRAN
Tel. 88605776-9 ISO 9001:2008
Fax. 88060801
ISO/TS 29001:2010
OHSAS 18001:2007
ISO 14001:2004
HSE-MS
Page 48 of 48

Company Profile

Transcription

Similar documents

Company Profile