AIR VENT HEADfor better reliability, Higher efficiency and safety

AIR VENT HEAD for better reliability,
Higher efficiency and safety
(Type approved products on the basis of The Latest Rule“ IACS UR P3 (Rev.3)”)
Innovative character and high service level
(Experience and Know-how : Basis for supreme reliability)
Satisfied Rules
-The Latest IACS P3 “Air Pipe Closing Devices”(REV.3)
(Test : Flow Test, Tightness Test, Discharge/ Reverse Flow Test (Vacuum Test)
Impact Test, Compression Loading Test,etc.)
-IACS S27 “Strength requirements for Fore Deck Fittings and
Equipment requirement”
Quality Management System
( ISO 9001: 2008)
(ISO 14001: 2004)
(OHSAS 18001:2007)
Certified Type Approvals
Certificate Number: 15-BK1364097-PDA
19/MAY/2015
Confirmation of Product Type Approval
Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product.
This certificate reflects the information on the product in the ABS Records as of the date and time the certificate is
printed.
Pursuant to the Rules of the American Bureau of Shipping (ABS), the manufacturer of the below listed product held
a valid Manufacturing Assessment (MA) with expiration date of 13/MAY/2020. The continued validity of the
Manufacturing Assessment is dependent on completion of satisfactory audits as required by the ABS Rules.
And; a Product Design Assessment (PDA) valid until 06/MAY/2020 subject to continued compliance with the Rules
or standards used in the evaluation of the product.
The above entitle the product to be called Product Type Approved.
The Product Design Assessment is valid for products intended for use on ABS classed vessels, MODUs or facilities
which are in existence or under contract for construction on the date of the ABS Rules used to evaluate the
Product.
ABS makes no representations regarding Type Approval of the Product for use on vessels, MODUs or facilities
built after the date of the ABS Rules used for this evaluation.
Due to wide variety of specifications used in the products ABS has evaluated for Type Approval, it is part of our
contract that; whether the standard is an ABS Rule or a non-ABS Rule, the Client has full responsibility for
continued compliance with the standard.
Product Name: Air Vent Head, Disc Type
Model Name(s): Disc-A(welding) Type Disc-A(casting) Type
Presented to:
KWANG SAN CO., LTD.
1173-2, JISA-DONG
KANGSEO-GU
Korea, Republic of
Intended Service:
1. Body : SS400, FCD450, 2. Disc : Polypropylene 3. Wire mesh : SUS316
3
Ratings:
1. Design Pressure : 16 kg/cm2 2. Design Temperature : -54°C + 85°C 3. Size :
50A/65A/80A/100A/125A/150A/200A/250A/300A/350A/400A/450A/500A
Service Restrictions:
1. Unit Certification is not required for this product. If the manufacturer or
purchaser's request an ABS Certificate for compliance with a specification or
standard, the specification or standard, including inspection standards and
tolerances, must be clearly defined. 2. Vent outlets from fuel oil tanks are to be
fitted with corrosion resistant flame-screens. Either a single screen of
corrosion-resistant wire of at least 12 by 12 mesh per linear cm (30 by 30 mesh per
linear inch), or two screens of at least 8 by 8 mesh per linear cm (20 by 20 mesh
per linear inch) spaced not less than 13 mm (0.5 inch) nor more than 38 mm (1.5
inch) apart are acceptable. The clear area through the mesh of the flame-screen is
to be not less than the required area of the vent pipe specified in 4-6-4/9.3.3 of the
Steel Vessels Rules. [4-6-4/9.3.5 (b) i) of the Steel Vessels Rules]
Comments:
05/19/2015 2:18:48 AM
2 www.kwangsan.com
Fresh water and sea water tanks, ballast and fuel oil tanks and lubricating oil tanks
Description:
Tier:
1. The Manufacturer has provided a declaration about the control of, or the lack of
Asbestos in this product. 2. Type test done by KOMERI (Korea Marine Equipment
Research Institute). : Test Report No. KOMERI-To-14T3058 dated 16 January
Copyright 2001 American Bureau of Shipping. All rights reserved.
Page 1 of 2
Innovative Characteristics
(Perfect Performance, Best quality, Reasonable Price)
Excellent performance based on experience and know-how.
Type approved air vent head meets IACS P3 Rule(Rev.3) equipped
with self shop test facilities basis for supreme reliability
Material
& Spec
Type : Welding Type and Casting Type
(Body : FCD450 /SS400 /Aluminium /
Stainless Steel /SCPL1 )
Flange : JIS / ANSI / DIN are available
Design
Compact & Optimized size
Light weight
Rigid components against any damages
Convenience
Easy installation
No maintenance
Efficiency
No corrosion
Noise Abatement
Competitive price
KWANGSAN CO.,LTD 3
MODEL: DISC-A TYPE
(CASTING)
Component Materials
NO.
1
2
3
4
5
6
6-1
7
8
9
10
11
12
13
14
ITEM
BODY
TOP COVER
SIDE CVER
HEX.BOLT
PLANE WASHER
NET FRAME
WIRE MESH
NAME PLATE
SEAT PACKING
GASKET
DISC FLOAT
GUIDE BOLT
GUIDE PACKING
SPRING WASHER
LIFTING EYE BOLT
MATERIAL
FCD450
FCD450
SS400
SS400
SS400
SS400
SUS316
SUS316
NBR
NBR
POLYPROPYLENE
SUS304
NBR
SUS304
SS400
Specifications
Unit : mm
NOMINAL DIA.
INCH
MM
2”
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
400A
450A
500A
2 12”
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
A
B
Approx.
H1
H2
T
Abt
WEIGHT(KG)
54
67
177
193
192
221
301
326
181
198
14
14
12
14
79
103
128
152
201
250
299
335
383
430
479
205
239
283
329
411
497
584
648
728
825
912
251
274
324
374
449
543
634
702
798
886
978
353
336
369
417
487
591
677
751
830
931
1009
217
211
235
273
326
378
439
499
556
624
683
14
16
16
18
20
22
22
24
24
24
24
17
25
33
46
70
100
141
198
246
345
415
4 www.kwangsan.com
MODEL: DISC-A TYPE
(WELDING)
Component Materials
NO.
1
2
3
4
5
6
6-1
7
8
9
10
11
12
13
14
15
ITEM
BODY
TOP COVER
SIDE CVER
HEX.BOLT
PLANE WASHER
NET FRAME
WIRE MESH
NAME PLATE
SEAT PACKING
GASKET
DISC FLOAT
GUIDE BOLT
GUIDE PACKING
SPRING WASHER
LIFTING EYE BOLT
GUIDE BUSHING
MATERIAL
SS400
SS400
SS400
SS400
SS400
SS400
SUS316
SUS316
NBR
NBR
POLYPROPYLENE
SUS304
NBR
SS400 SUS304
SS400
SS400
Specifications
Unit : mm
NOMINAL DIA.
INCH
MM
2”
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
400A
450A
500A
2 12”
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
A
B
Approx.
H1
H2
T
Abt
WEIGHT(KG)
43.1
62.3
177
193
191
220
284
309
181
198
13.3
14
11
13
73.9
102.3
126.6
151
199.9
248.8
297.9
333.4
381
428.6
477.8
205
233
277
323
406
491
574
636
716
819
904
250
270
320
368
443
539
630
697
794
878
974
336
318
351
402
472
571
650
726
798
894
971
217
211
235
273
326
378
439
499
556
624
683
14
16
16
18
20
22
22
24
24
24
24
16
21
29
43
66
95
125
184
230
326
392
KWANGSAN CO.,LTD 5
MODEL: DISC-B TYPE
Component Materials
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
ITEM
BODY
TOP COVER
HEX.BOLT&WASHER
DISC
GUIDE BAR
PACKING
SEAT PACKING
PIECE
HEX.BOLT&WASHER
WIRE NET
NET FRAME
PACKING
TOP PACKING
MATERIAL
FCD450
FCD450
SUS304
SUS304
SUS304
NBR
NBR
FCD450
SUS304
SUS304
SS400
NBR
NBR
Specifications
Unit : mm
NOMINAL DIA.
INCH
MM
2”
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
2 ”
1
2
3”
4”
5”
6”
8”
10”
12”
14”
A
B
L1
L2
H
H1
T
APPROX
W.(kg)
50
60
91
106
135
146
97
114.5
120
130
197
226
127
146
7
7
14.2
17
80
100
125
150
200
250
300
350
127
86
98
117
146
172
202
225
156
250
288
330
432
546
616
714
138
142
164.5
192
244
287
327
384
150
185
210
240
270
320
350
380
266
238
266
302
382
452
530
600
176
160
180
208
269
314
367
415
7
8
8
9
9
9
10
12
19.5
26
38
54
93
129
175
236
6 www.kwangsan.com
MODEL: BALL-A TYPE
(CASTING)With Electric Heat Tracing
Component Materials
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
ITEM
BODY
TOP COVER
SIDE COVER
HEX.BOLT
PLANE WASHER
NET FRAME
WIRE MESH
NAME PLATE
SEAT PACKING
GASKET
BALL
HEX.BOLT
PLANE WASHER
MATERIAL
FCD450
FCD450
SS400
SUS304
SUS304
SS400
SUS316
SUS316
NBR
NBR
SUS304
SUS304
SUS304
14
LIFTING EYE BOLT
SS400
Specifications
Unit : mm
NOMINAL DIA.
INCH
MM
2”
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
400A
450A
500A
2 12”
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
A
B
Approx.
H1
H2
T
Abt
WEIGHT(KG)
43.1
62.3
245
253
249
277
443
466
301
317
14
14
27
30.6
73.9
102.3
126.6
151
199.9
248.8
297.9
333.4
381
428.6
477.8
261
279
315
384
457
538
627
691
775
902
951
308
305
349
420
521
592
627
743
829
866
1003
503
468
517
585
661
779
873
937
1069
1252
1324
346
332
373
438
493
554
621
669
775
905
975
14
16
16
18
20
22
22
24
24
24
24
35
40.8
50.9
83
110
148.3
201
270
347.3
503
571.2
7 www.kwangsan.com
MODEL: BALL-A TYPE
(WELDING) With Electric Heat Tracing
Component Materials
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ITEM
BODY
TOP COVER
SIDE CVER
HEX.BOLT
PLANE WASHER
NET FRAME
WIRE MESH
NAME PLATE
SEAT PACKING
GASKET
BALL
HEX.BOLT
PLANE WASHER
LIFTING EYE BOLT
GUIDF BUSHING
MATERIAL
SS400
SS400
SS400
SUS304
SUS304
SS400
SUS316
SUS316
NBR
NBR
SUS304
SUS304
SUS304
SS400 SS400
SS400
Specifications
Unit : mm
NOMINAL DIA.
INCH
MM
2”
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
400A
450A
500A
2 ”
1
2
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
A
B
Approx.
H1
H2
T
Abt
WEIGHT(KG)
43.1
62.3
247
255
249
277
427
450
313
329
14
14
24
27
73.9
102.3
126.6
151
199.9
248.8
297.9
333.4
381
428.6
477.8
263
279
315
382
455
538
627
687
775
902
951
308
301
345
416
517
598
673
739
827
892
1001
487
453
502
570
646
760
849
914
1043
1218
1290
358
344
385
450
507
568
635
683
789
919
989
14
16
16
18
20
22
22
24
24
24
24
31
35
44
79
105
141
181
241
311
451
514
KWANGSAN CO.,LTD 8
MODEL: GOOSE NECK TYPE
Component Materials
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
ITEM
FLANGE
PIPE
REDUCER
NAME PLATE
90’ ELBOW
FLANGE
WIRE NET
HEX.BOLT&NUT
BRAKET 10t
PLATE 10t
PLATE 10t
PIPE
PIPE
MATERIAL
SS400
STPG370
STPG370
SUS316
STPG370
SS400
SUS316
SUS316
SS400
SS400
SS400
STPG370
STPG370
14
15
16
17
18
19
PIPE
DRAIN PIPE
FLANGE
GASKET
HEX.BOLT&NUT
GASKET
STPG370
STPG370
SS400
NON ASBESTOS
SUS 316
NBR
Component Materials
NO.
1
2
3
4
5
6
7
8
ITEM
PIPE
FLANGE
90’ ELBOW
REDUCER
RING
HEX BOLT&NUT
WIRE NET
NAME PLATE
Specifications
Unit : mm
Specifications
Unit : mm
MATERIAL
STPG370
SS400
STPG370
STPG370
SS400
SS400
SUS316
SUS316
KWANGSAN CO.,LTD
9
MODEL: OIL COAMING TYPE
MATERIAL TABLE
Component Materials
REMARKS
NO
15
15
REF. TO AIR PIPE HEAD(AI-TYPE)
SS 400
2/1
DRAIN FLG & PIPE(SCH.80)
SS 400
1/1
7
(300A,
350A=SCH.40)
7
12
12
4
VENT HEAD BOX
SS 400
1
5
RING PLATE
SS 400
1
6
VENT HEAD COVER
SS 400
1
7
HAND GRIP
SS 400
1
8
HEX. BOLT
SUS 304
2
M10
9
GASKET
NBR
1
3t
10
LOUVER COVER
SS 400
2
6t (65A, 80A=1EA)
15
8
10
EYE BOLT & NUT
SS 400
2
M16/M20
13
SUPPORT
SS 400
4
8t
BUTTERFLY BOLT/NUT SUS 304
HINGE
4.5t
16
Ø16 R.Bar
17
18
PACKING
19
HEX. BOLT/NUT/WASHER
L2
L2
12
15
L1
L1
M12
4
6t (65A, 80A=2EA)
STIFFENER
SS 400
4
BOTTOM PLATE
SS 400
1
7
7
H4
NBR
1
3t
SUS 304
N
M10 X 35L
200A ~ 350A : 9t X 50 (FLAT BAR)
6
12
6
12
H4
4.5t
7
1
13
13
10t
D
D
1
5
A
2
SS 400
2 STIFFENER = 65A ~ 150A : 6t X 32 (FLAT BAR)
1
N-M10
6t (65A.80A=1EA)
14
14
5
2
8t
6t
ØC
ØC
150A ~ 350A : M20, 120L
NOTE : 1 EYE BOLT & UNT = 100A ~ 125A : M16, 90L
A
A
JIS 5K-25A
SS 400
B1
CONN. FLG & PIPE(SCH.80)
3
LOUVER FRAME
11
N-M10
N-M10
REMARKS
B1
1
Q’TY
14
B2
FCD 450
MATERIAL
10
14
B
AIR PIPE HEAD
2
DESCRIPTIONS
8
10
8
B2
1
Q’TY
B
MATERIAL
DESCRIPTIONS
4.5t
NO
1
H
H
H5
H6
19
19
*
3
9
50
50
*
9
3
H2
H2
0
R1
L3
15
15
10t
10t
100
100
L
0
L
B2
6t
6t
R1
H5
1840
18
H1
L2
40
40
25
H1
B1
4
4
40
25
H6
10
10
B
H3
ØC
H3
12
L3
L1
D
3
3
2
2
17
17
16
16
Specifications
B1
B2
H
H1
H2
H3
38
226
150
235
80
38
266
150
255
80
146H4
340
5K-80A 350
247
156
390
5K-100A 350
241
250
390
38
238
5K-125A10 390
288
288
420
38
266
640
38
6t
50
547
546
730
5K-300A 840
658 R
616
860L3
50
757
714
96017
50
100
5K-250A 700
L
10
5K-350A3 940
2
H6
490
432
50
16
40
150
150
382
150
H6
L
L1
L2
L1
N
C
ANGLE
15
1
180
232
350
70
108
62
90
4
348
50X6t
180
262
390
70
125
72
90
4
388
50X6t
225
80
180
258
375
70
120
70
90
4
388
50X6t
245
100
210
303
427
70
142
82
90
6
428
50X6t
278
120
240
351
480
70
163
95
110
6
508
50X6t
330
160
330
422
585
80
210
122
150
8
638
75X6t
19
9
452
150
386
200
370
495
680
80
257
150
170
8
738
75X6t
530
150
440
240
430
570
780
80
298
170
210
10
878
75X6t
600
150
500
280
462
652
880
80
340
198
240
10
978
75X6t
REMARK : FLANGE TO BE JIS 5K FLANGES.
10 www.kwangsan.com
150
25
302
H5
330
454
H2
346
50
18
H5
H1
40
5K-200A 600
10t
5K-150A 470
4
H3
209
4.5t
5K-65A5 310
13
H4
6
12
7
H
B
1
*
A
Ø(abt.)
3
N.D
Unit : mm
MODEL: HTACH TYPE
Component Materials
NO
DESCRIPTIONS
MATERIAL
1
BODY
SS 400
2
COVER
SS 400
3
PACKING
NBR
4
DISC
SUS 304
5
PAD
SS 400
6
EYE BOLT
BsBF
7
HINGE
SS 400
8
GUIDE BOLT
SUS 304
9
SPRING WASHER
SS400
10
GASKET
NBR
11
NET
SS400
OTHER PROPER MATERIAL MAY BE USED ON SPECIAL REQUEST
Specifications
NOMINAL DIA
Unit : mm
Ø D1
L1
L2
L3
L4
H
H1
H2
T1
T2
235
188
188
376
150
190
50
55
8
8
10”
mm
250A
12”
300A
323
210
210
420
150
190
50
55
8
8
14”
350A
339
232
232
500
150
210
50
55
8
8
16”
400A
391
254
254
530
150
240
50
55
8
8
18”
450A
442
289
289
570
150
300
50
55
14
10
INCH
REMARK
KWANGSAN CO.,LTD 11
Worldwide Service Network
Always with you!
NORWAY
RUSSIA
DENMARK
UK
BELGIUM
SPAIN
NETHERLANDZ
GERMANY
ITALY
GREECE
CANADA
KOREA
CHINA
TURKEY
USA
JAPAN
HONGKONG
UAE
TAIWAN
OMAN
INDIA
VIETNAM
PANAMA
MALAYSIA
SINGAPORE
INDONESIA
BRAZIL
AUSTRALIA
Head Office
☏ Tel : +82-51-974-6301
Fax : +82-51-974-6305
Yangsan Factory
☏ Tel : +82-55-381-6305
(618-230) 521, Gwahaksandan-ro, Gangseo-gu, Busan, Korea
www.kwangsan.com
e-mail : [email protected]
(626-120) 575-5, Sanmak-dong, Yangsan-si, Gyeongsangnam -do, Korea
Changwon Factory
(642-370) 116, GongDan-ro, SungSan-gu, Changwon-si, Gyeongsangnam -do, Korea
Daebul Factory
(526-892) 84, Daebulsandan 8-ro, Samho-eup, Yeongam-gun, Jeollanam-do, Korea
Fax : +82-55-381-6309
☏ Tel : +82-70-4628-8851
Fax : +82-55-252-7305
☏ Tel : +82-61-462-6301
Fax : +82-61-462-6303
65A