installation handbook - 1/3 installation typologies - 2/3

M.T.M. s.r.l.
Via La Morra, 1
12062 - Cherasco (Cn) - Italy
Tel. +39 0172 4860140
Fax +39 0172 488237
installation handbook - 1/3
installation typologies - 2/3
software handbook - 3/3
LPG Sequent 56 with BRC injectors and Genius 56/Genius 56 MAX reducer
TA01976L-EN - N. 3 - 15.11.2006
RIFERIMENTI UTILI
For further information on
“SEQUENT 56” system, it is recommended to refer to the other handbooks and informative documents
published by BRC.
• Installer’s handbook.
It is the easiest way to obtain
fundamental, general information regarding the installation of
the SEQUENT 56 equipment.
Inside that, it is moreover possible to find:
- knowledge about the working
principle and the structure of the
system,
- a detailed description of the
components which the system is
made up,
- indications about the assembly
of the mechanical part and electrical connections.
• Software handbook.
It is the indispensable guide for
who wants to learn managing
the system by means of a
personal computer, realizing
mappings , programming the
ECUs, making diagnosys, modifying the working parameters. It
describes the working of the
“SEQUENT 56” software, which
runs on Personal Computers, by
driving the user in the various
steps of each function.
2
PRESENTAZIONE
follow the wiring diagrams indicated
on each mechanical diagram
Please remark that the representation of the products on the
mechanical diagrams is purely
indicative.
Il Front Kit SEQUENT 56 contains:
• 1 Sequent 56 ECU without
cartography,
• 1 GENIUS SEQUENT 56 LPG
or GENIUS MAX 56 SEQUENT
LPG pressure reducer with
water temperature sensor,
• 1 LPG “ET98 Super” solenoid
valve,
• 5, 6 o 8 depending on the
number of cylinders BRC gas
injectors with respective calibrated nozzles,
• 1 or 2 BRC injectors connection rail with a gas temperature
or presure sensor version
normal or supercharged,
• 1 filter “FJ1 HE”
• 1 Changeover switch Sequent
56
• 1 harness BRC injectors
Sequent 56,
• 1 roll of ø 8 copper pipe,
• 16x23 Water pipe,
• 1 bag containing screws, nuts
and various fittings,
• 10x17 or 12x19 Gas pipe,
• 5x10,5 Gas pipe to be used on
the injectors and on the pressure points,
• A bag containing: idling nozzle,
nylon Y piece, nuts, junctions
and “click” clamps for 5x10,5,
10x17 and 12x19 gas pipes,
“click” clamps for the pressure
points.
According to the type of vehicle
to be converted, in the following
mechanical scheme you will find
the indication of the necessary front
kit where the technician will find all
the suitable and necessary components for the installation.
For the general electrical
connections it will be sufficient to
3
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 5-CYLINDERS
WITH POWER LOWER THAN 140 kW
Vehicle Type
Gas injectors
5 Cylinders
Aspirated power
lower than 100 kW
BRC
NORMAL
5 Cylinders
Aspirated power included
between 100 and 140 kW
BRC
MAX
5 Cylinders
Supercharged power
lower than 140 kW
BRC
MAX
Front Kit
09SQ20000028G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000012G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000013G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Supercharged press. and temp. gas sensor
Electrical Diagram
E.D. 01 LPG
E.D. 01 LPG
E.D. 01 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 5-CYLINDERS
POWER INCLUDED BETWEEN 120 kW AND 180 kW
Vehicle Type
5 Cylinders
Aspirated power
included between
120 kW and 150 kW
5 Cylinders
Aspirated power
included between
140 kW and 160 kW
5 Cylinders
Supercharged power
included between
140 kW and 180 kW
Gas injectors
BRC
MAX
BRC
SUPER MAX
BRC
SUPER MAX
Front Kit
09SQ20000035G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000014G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000015G
Genius MAX Sequent 56
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
4
M.D. 1
LPG
M.D. 2
LPG
Electrical Diagram
E.D. 02 LPG
E.D. 02 LPG
E.D. 02 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 6 STRAIGHT CYLINDERS
WITH POWER LOWER THAN 140 kW
Vehicle Type
Gas injectors
6 Cylinders
Aspirated power
lower than 120 kW
BRC
NORMAL
6 Cylinders
Aspirated power
included between
120 and 140 kW
BRC
MAX
6 Cylinders
Supercharged power
lower than 140 kW
BRC
NORMAL
Front Kit
09SQ20000029G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000016G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000017G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
Electrical Diagram
E.D. 03 LPG
E.D. 03 LPG
E.D. 03 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 6 STRAIGHT CYLINDERS
POWER INCLUDED BETWEEN 140 kW AND 200 kW
Vehicle Type
6 Cylinders
Aspirated power
included between
140 kW and 165 kW
6 Cylinders
Aspirated power
included between
140 kW and 190 kW
6 Cylinders
Supercharged power
included between
140 kW and 200 kW
Gas injectors
BRC
MAX
BRC
SUPER MAX
BRC
SUPER MAX
Front Kit
09SQ20000036G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000018G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000019G
Genius MAX Sequent 56
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
5
M.D. 3
LPG
M.D. 4
LPG
Electrical Diagram
E.D. 04 LPG
E.D. 04 LPG
E.D. 04 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 6-CYLINDERS “V-SHAPED”
WITH POWER LOWER THAN 140 kW
Vehicle Type
Gas injectors
6 Cylinders
“V-shaped” Aspirated
power lower than 120 kW
BRC
NORMAL
6 Cylinders “V-shaped”
Aspirated power included
between 120 kW and 140 kW
BRC
MAX
6 Cylinders
“V-shaped” Supercharged
power lower than 140 kW
BRC
NORMAL
Front Kit
09SQ20000030G
LPG Genius Sequent 56/24/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000020G
LPG Genius Sequent 56/24/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000021G
LPG Genius Sequent 56/24/24 1500 mbar
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
Electrical Diagram
E.D. 05 LPG
E.D. 05 LPG
E.D. 05 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 6-CYLINDERS “V-SHAPED”
WITH POWER INCLUDED BETWEEN 140 AND 200 kW
Vehicle Type
6 Cylinders “V-shaped”
Aspirated powered
included between
140 and 165 kW
6 Cylinders “V-shaped”
Aspirated powered
included between
140 and 190 kW
6 Cylinders “V-shaped”
Supercherged powered
included between
140 and 200 kW
Gas injectors
BRC
MAX
BRC
SUPER MAX
BRC
SUPER MAX
Front Kit
09SQ20000037G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000022G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000023G
Genius MAX Sequent 56
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
6
M.D. 5
LPG
M.D. 6
LPG
Electrical Diagram
E.D. 06 LPG
E.D. 06 LPG
E.D. 06 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 8-CYLINDERS “V-SHAPED”
WITH POWER LOWER THAN 140 KW
Vehicle Type
Gas injectors
8 Cylinders
“V-shaped” Supercharged
power lower than 140 kW
BRC
NORMAL
8 Cylinders
“V-shaped” Supercharged
power lower than 140 kW
BRC
NORMAL
Front Kit
09SQ20000024G
LPG Genius Sequent 56/24/24 1500 mbar
Super Soleniod Valve
Pressure and temperature gas sensor
09SQ20000025G
LPG Genius Sequent 56/24 1500 mbar
Super Soleniod Valve
Press. and temp. gas sensor
Electrical Diagram
E.D. 07 LPG
E.D. 07 LPG
LPG SEQUENT 56 MECHANICAL DIAGRAM
ON VEHICLES WITH 8-CYLINDERS “V-SHAPED”
WITH POWER INCLUDED BETWEEN 140 AND 240 kW
Vehicle Type
8 Cylinders “V-shaped”
Aspirated powered
included between
140 and 200 kW
8 Cylinders “V-shaped”
Supercharged powered
included between
140 and 200 kW
8 Cylinders “V-shaped”
Aspirated powered
included between
160 and 240 kW
8 Cylinders “V-shaped”
Supercharged powered
included between
160 and 240 kW
Kit Base
Gas injectors
BRC
MAX
BRC
MAX
BRC
Super MAX
BRC
Super MAX
09SQ20000026G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000027G
Genius MAX Sequent 56
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
09SQ20000038G
Genius MAX Sequent 56
Super Soleniod Valve
Press. and temp. gas sensor
09SQ20000039G
Genius MAX Sequent 56
Super Soleniod Valve
Supercharged Press. and temp. gas sensor
7
M.D. 07
LPG
M.D. 8
LPG
Electrical Diagram
E.D. 08 LPG
E.D. 08 LPG
E.D. 08 LPG
E.D. 08 LPG
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 5-CYLINDERS ASPIRATED
OR SUPERCHARGED WITH POWER LOWER THAN 140 kW
E.D. 01
LPG
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
Connettore
10 Poli
collegamento
iniettori
Tagliare
ed isolare
1° Iniet.
Benz.
2° Iniet.
Benz.
3° Iniet.
Benz.
4° Iniet.
Benz.
Sonda
Lambda
Bancata 1
1
"I1"
2
"I2"
3
"I3"
4
"I 4 "
5
"I 5 "
Sensore pressione
e temperatura gas
versione normale o turbo
3
2
1
Sequenza
iniettori
Benzina
(-)
Batteria
Centralina
Iniezione
Benzina
6
"I 6 "
Tagliare
ed isolare
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
Sensore di
temperatura
Acqua
(+)
Elettrovalvola
Gpl
+
(Segnale TPS)
5° Iniet.
Benz.
5
4
Rosso
Rosso
(Segnale Contagiri)
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
Guaina termorestringente
colore grigio
Nero
Nero
Nero
Bianco/Viola
"P6"
Grigio
"P5"
Marrone
"P3"
Azzurro
"P2"
Giallo
"P4"
Giallo
"P1"
Azzurro
Connettore
10 Poli
collegamento
iniettori
Riduttore
"GENIUS
SEQUENT 56 GPL"
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
8
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 5-CYLINDERS ASPIRATED OR SUPERCHARGED WITH POWER INCLUDED BETWEEN 140 OR 170 kW
E.D. 02
LPG
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
Connettore
10 Poli
collegamento
iniettori
Sonda
Lambda
Bancata 1
Tagliare
ed isolare
1° Iniet.
Benz.
2° Iniet.
Benz.
3° Iniet.
Benz.
4° Iniet.
Benz.
Grigio
"P6"
Marrone
"P5"
Azzurro
"P3"
Giallo
"P2"
Azzurro
"P4"
Giallo
"P1"
Bianco/Viola
Connettore
10 Poli
collegamento
iniettori
(Segnale Contagiri)
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
(Segnale TPS)
5° Iniet.
Benz.
Guaina termorestringente
colore grigio
1
"I1"
2
"I2"
3
"I3"
"I 4 "
4
Sensore pressione
e temperatura gas
versione normale o turbo
5
4
3
2
1
Sequenza
iniettori
Benzina
Centralina
Iniezione
Benzina
5
"I 5 "
6
"I 6 "
Tagliare
ed isolare
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
Sensore di
temperatura
Acqua
(-)
Nero
Nero
Nero
Rosso
Rosso
(+)
Riduttore
"GENIUS MAX
SEQUENT 56 GPL"
Elettrovalvola
Gpl
+
Batteria
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
9
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 6 STRAIGHT CYLINDERS ASPIRATED
OR SUPERCHARGED WITH POWER LOWER THAN 140 kW
E.D. 03
LPG
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
Connettore
10 Poli
collegamento
iniettori
Sonda
Lambda
Bancata 1
1° Iniet.
Benz.
2° Iniet.
Benz.
3° Iniet.
Benz.
4° Iniet.
Benz.
5° Iniet.
Benz.
6° Iniet.
Benz.
1
"I1"
2
"I2"
3
"I3"
4
"I 4 "
5
"I 5 "
6
Centralina
Iniezione
Benzina
"I 6 "
Entrata
gas
5
4
3
2
Sequenza
iniettori
Benzina
1
(-)
Batteria
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
Sensore di
temperatura
Acqua
(+)
Elettrovalvola
Gpl
+
(Segnale TPS)
Sensore pressione
e temperatura gas
versione normale o turbo
6
Rosso
Rosso
(Segnale Contagiri)
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
Guaina termorestringente
colore grigio
Nero
Nero
Nero
Bianco/Viola
"P6"
Grigio
"P5"
Marrone
"P3"
Azzurro
"P2"
Giallo
"P4"
Giallo
"P1"
Azzurro
Connettore
10 Poli
collegamento
iniettori
Riduttore
"GENIUS
SEQUENT 56 GPL"
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
10
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 6-STRAIGHT CYLINDERS ASPIRATED OR SUPERCHARGED WITH POWER INCLUDED BETWEEN 140 OR 200 kW
Fusibile
5A
Fusibile
15A
E.D. 04
LPG
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
Connettore
10 Poli
collegamento
iniettori
Sonda
Lambda
Bancata 1
1° Iniet.
Benz.
2° Iniet.
Benz.
3° Iniet.
Benz.
4° Iniet.
Benz.
5° Iniet.
Benz.
Grigio
"P6"
Marrone
"P5"
Azzurro
"P3"
Giallo
"P2"
Azzurro
"P4"
Giallo
"P1"
Bianco/Viola
Connettore
10 Poli
collegamento
iniettori
(Segnale Contagiri)
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
(Segnale TPS)
6° Iniet.
Benz.
Guaina termorestringente
colore grigio
1
"I1"
2
"I2"
3
"I3"
4
"I 4 "
5
"I 5 "
6
Centralina
Iniezione
Benzina
"I 6 "
Sensore pressione
e temperatura gas
versione normale o turbo
6
Entrata
gas
5
4
3
2
Sequenza
iniettori
Benzina
1
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
Sensore di
temperatura
Acqua
(-)
Nero
Nero
Nero
Rosso
Rosso
(+)
Elettrovalvola
Gpl
+
Batteria
Riduttore
"GENIUS MAX
SEQUENT 56 GPL"
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
11
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 6-CYLINDERS “V-SHAPED” ASPIRATED
OR SUPERCHARGED POWERED LOWER THAN 140 kW
E.D. 05
LPG
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
"P1"
1° Iniet.
Benz.
"P3"
2° Iniet.
Benz.
3° Iniet.
Benz.
"P5"
4° Iniet.
Benz.
Guaina termorestringente
colore grigio
DX
5
6
1
2
3
4
SX
Sequenza
iniettori
Benzina
(-)
Nero
Nero
Nero
Rosso
Rosso
Batteria
5° Iniet.
Benz.
Bianco/Viola
Marrone
(Segnale Contagiri)
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
(Segnale TPS)
Centralina
Iniezione
Benzina
"P6"
6° Iniet.
Benz.
1
"I1"
2
"I2"
3
"I3"
Sensore pressione
e temperatura gas
versione normale o turbo
Entrata
gas
Sensore di
temperatura
Acqua
Riduttore
"GENIUS
SEQUENT 56 GPL"
4
"I 4 "
5
"I 5 "
6
"I 6 "
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
(+)
Elettrovalvola
Gpl
+
Azzurro
Sonda
Lambda
Bancata 1
"P4"
"P2"
Giallo
Giallo
Azzurro
Connettore
10 Poli
collegamento
iniettori
Grigio
Connettore
10 Poli
collegamento
iniettori
Sequenza iniettori GAS
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
12
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 6-CYLINDERS “V-SHAPED” ASPIRATED OR SUPERCHARGED WITH POWER INCLUDED BETWEEN 140 kW OR 200 kW
E.D. 06
LPG
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
"P1"
1° Iniet.
Benz.
Sonda
Lambda
Bancata 1
"P4"
"P2"
"P3"
2° Iniet.
Benz.
3° Iniet.
Benz.
"P5"
4° Iniet.
Benz.
5° Iniet.
Benz.
Bianco/Viola
Marrone
Azzurro
Giallo
Giallo
Azzurro
Connettore
10 Poli
collegamento
iniettori
Grigio
Connettore
10 Poli
collegamento
iniettori
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
6
1
2
3
4
SX
Sequenza
iniettori
Benzina
Centralina
Iniezione
Benzina
6° Iniet.
Benz.
1
"I1"
2
"I2"
3
"I3"
Sensore pressione
e temperatura gas
versione normale o turbo
5
(Segnale TPS)
"P6"
Guaina termorestringente
colore grigio
DX
(Segnale Contagiri)
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
4
"I 4 "
5
"I 5 "
6
"I 6 "
Entrata
gas
Sequenza iniettori GAS
Sensore di
temperatura
Acqua
(-)
Nero
Nero
Nero
Rosso
Rosso
(+)
Elettrovalvola
Gpl
+
Batteria
Riduttore
"GENIUS MAX
SEQUENT 56 GPL"
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
13
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 8-CYLINDERS “V-SHAPED” ASPIRATED
OR SUPERCHARGED POWERED LOWER THAN 140 kW
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
E.D. 07
LPG
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
"P1"
"P4"
"P2"
1° Iniet.
Benz.
"P5"
"P3"
2° Iniet.
Benz.
3° Iniet.
Benz.
"P8"
"P6"
4° Iniet.
Benz.
5° Iniet.
Benz.
7
5
3
1
8
6
4
2
SX
Rosso
Rosso
Sequenza
iniettori
Benzina
6° Iniet.
Benz.
7° Iniet.
Benz.
Batteria
Azzurro
Marrone
Bianco/Viola
(Segnale TPS)
Centralina
Iniezione
Benzina
8° Iniet.
Benz.
1
"I1"
2
"I2"
3
"I3"
"I 4 "
4
Entrata
gas
Sensore di
temperatura
Acqua
Riduttore
"GENIUS
SEQUENT 56 GPL"
5
"I 5 "
6
"I 6 "
7
"I 7 "
"I 8 "
8
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
(+)
Elettrovalvola
Gpl
+
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
Sensore pressione
e temperatura gas
versione normale o turbo
(-)
Nero
Nero
Nero
Sonda
Lambda
Bancata 1
(Segnale Contagiri)
"P7"
Guaina termorestringente
colore grigio
DX
Giallo
Giallo
Azzurro
Connettore
10 Poli
collegamento
iniettori
Grigio
Connettore
10 Poli
collegamento
iniettori
Sequenza iniettori GAS
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
14
LPG SEQUENT 56 ELECTRICAL DIAGRAM
ON VEHICLES WITH 8-CYLINDERS “V-SHAPED” ASPIRATED OR SUPERCHARGED WITH POWER INCLUDED BETWEEN 140 kW OR 200 kW
Fusibile
5A
Fusibile
15A
Connettore
Commutatore
Relé
E.D. 08
LPG
Presa
Diagnosi
Connettore
Sensore di livello
3 2 1
Connettore
Elettrovalvola Posteriore
Sequent 56
"P1"
"P4"
"P2"
1° Iniet.
Benz.
"P5"
"P3"
2° Iniet.
Benz.
3° Iniet.
Benz.
"P8"
"P6"
4° Iniet.
Benz.
5° Iniet.
Benz.
7
5
3
1
8
6
4
2
SX
Bianco/Viola
Marrone
Azzurro
Sonda
Lambda
Bancata 1
Sonda
+12V
Lambda
Sotto
Bancata 2 chiave
6° Iniet.
Benz.
7° Iniet.
Benz.
(Segnale TPS)
Centralina
Iniezione
Benzina
8° Iniet.
Benz.
1
"I1"
2
"I2"
3
"I3"
"I 4 "
4
Sensore pressione
e temperatura gas
versione normale o turbo
Sequenza
iniettori
Benzina
(Segnale Contagiri)
"P7"
Guaina termorestringente
colore grigio
DX
Giallo
Giallo
Azzurro
Connettore
10 Poli
collegamento
iniettori
Grigio
Connettore
10 Poli
collegamento
iniettori
Entrata
gas
6
"I 6 "
7
"I 7 "
"I 8 "
8
Entrata
gas
Sequenza iniettori GAS
Sensore MAP
"Utilizzato solo in
fase di auto-mappatura"
5
"I 5 "
Sequenza iniettori GAS
Sensore di
temperatura
Acqua
(-)
Nero
Nero
Nero
Rosso
Rosso
(+)
Elettrovalvola
Gpl
+
Batteria
Riduttore
"GENIUS MAX
SEQUENT 56 GPL"
Multivalvola
Europa
ATTENZIONE:
- Seguire scrupolosamente la sequenza iniettori benzina ed iniettori gas come indicato nello schema.
- Non collegare mai a massa i fili dell'Elettrovalvola anteriore e posteriore.
- - Per consentire una corretta diagnosi dell'Elettrovalvola anteriore e di quella posteriore non collegarle
tra di loro.
- Non sostituire mai i fusibili con altri di portata inferiore o superiore.
CAUTION:
Be careful with the cars for which the manufacturer prohibits or advises against disconnecting the battery, not to alter the antitheft devices or automatic adaptivity Never use welders connected to the battery of the same car - Connect with suitably insulated soft solderings - Position the BRC electrical devices in a well ventilated area, protected from water seepages and heat sources - We recommend to insulate the BRC electronic control unit wires which are not connected - BRC
reserves the right to modify this diagram without notice - We also recommend you to be sure to have the last revision of the diagram drawn up by BRC.
15