McQuesten Group - Hood Distribution

Transcription

HOOD DISTRIBUTION
PRODUCT LISTING / Volume Five
www.HoodDistribution.com
ine
Eastern White P
Bevel Siding
roducts
od P
Engineered Wo
dar
Western Red Ce
ti
Dark Red Meran
Douglas Fir
OVERVIEW
Milton, VT - 11 acres and 30,000 square feet of covered storage.
The McQuesten Group consists of three locations
(Milton, Vermont; Manchester, Connecticut; and
Ayer, Massachusetts) with ready access to each
other’s inventory. Over the years, our customers
have depended on us for many of their product
needs. By offering quality products backed by
excellent customer service, we have earned
recognition as a vendor of choice in our industry.
Our Ayer, MA facility also houses our custom
milling operation that services all three locations.
This mill consists of a Resaw with 16”x16” cut
capacity and a Timber Sizer with 16” x 24”
capacity.
Refer to milling capabilities on page 12.
CEDAR & HEMLOCK BEVEL SIDING
Hood Distribution is providing a complete one-stop shopping SOLUTION for your bevel siding needs. The Bevel
Store is a new concept in the marketing of cedar and hemlock siding, offering you high quality products in the
quantities that allow for a profitable inventory. We achieve this by drawing from the consistent quality of historic
production methods, and viewing it from a current market perspective. Although we have not traditionally been
part of the bevel siding market, with the creation of The Bevel Store we are answering your needs in the wood
siding market.
Our Cedar comes from a mill that has been producing for the quality driven European specialty market. Due to
the demands of that market the mill has perfected the way they produce their products. The fiber is chosen for a
tighter and straighter grain. This allows the siding to be milled with a clean, smooth face and a clean, tight re-sawn
back. It also has a true 3/8” tapered end that eliminates splintering and feathering. The units are a smaller, rackfriendly pack size of 2500 ft surface measure, and tallied 6’ to 20’ random odd and even lengths. It is available in
Clear Vertical Grain Smooth and A Smooth in raw or primed, with1 coat of oil.
BEVEL SIDING
Since 1855, Hood Distribution, The
McQuesten Group has been known as
being a leading distributor of high
quality building materials.
The primed finger-joint beveled CVG and A Smooth come in 2500 ft units with all 16 ft lengths. There are no trim
backs in these units.
With the same care and attention given to the production of the Cedar bevel, a more economical Hemlock bevel
can also be offered. Produced to the same exacting tolerances as the cedar; the Hemlock is available only in raw
and primed random length CVG, which ensures the quality needed.
CEDAR:
Random Length 6-20 ft 2500 sm/unit:
1/2x6 CVG Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2x6 A Smooth
1/2x6 CVG Smooth Primed (Oil) . . . . . . . . . . . . . . . 1/2x6 A Smooth Primed (Oil)
1/2x6 A Rustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2x6 A Rustics Primed (Oil)
Manchester, CT - 5 acres and 30,000 square feet of covered storage.
Primed Finger-Joint All 16 ft (No Trimbacks) 2500 sm/unit:
HEMLOCK:
Baker Model D Resaw
Random Length 6-20 ft 2500 sm/unit:
1/2x5 CVG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2x5 CVG Primed (Oil)
1/2x6 CVG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2x6 CVG Primed (Oil)
3/4x10 CVG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4x10 CVG Primed (Oil)
Ayer, MA - We recently relocated from Billerica, MA to this new facility that
boast 10 acres of land and over 70,000 square feet of covered storage.
Stetson-Ross Timber Sizer
r th G o
ee
s The
od
oe
Ea
n, I t D
! * Gr
For more information, please visit the “Green” tab on our website.
1
EASTERN WHITE PINE
Abundant throughout the northeast, Eastern White Pine was originally
used as masts for the King’s Royal Navy and in the homes of Colonists
even before the Revolutionary War.
Eastern White Pine is available in a wide range of grades, and is
appropriate for a variety of uses, and a favorite species for siding, paneling,
furniture, trim details, moldings, packaging, millwork and flooring. The
Northeastern Lumber Manufacturers Association (NeLMA) is the grading
authority and rules writing agency for Eastern White Pine. The NeLMA
grade stamp has long been the trusted symbol of quality and excellence
since 1933.
As a renewable building material resource, Eastern White Pine is an
environmentally smart choice for designers and builders. When compared
to man-made building products, it is the obvious choice for performance
in “green-minded” construction. For more information: www.nelma.org
Durgin and Crowell Lumber Co., founded in 1976, has grown to become one of New
England’s largest manufacturers of kiln-dried Eastern White Pine lumber, annually
producing up to 30 million board feet. Durgin and Crowell prides itself not only on
the quality of its products, but also the quality of its people; from log purchasing, to
manufacturing, to sales. Their hard work and attention to detail help deliver products and service
that keep customers and end-users coming back.
Their modern sawmill facility is designed for maximum efficiency and output, but also allows
the flexibility to cater to the diverse demands of a quality conscious customer base. Durgin and
Crowell has a history of innovation, continually seeking new opportunities to grow and diversify
its business. Enhance pre-coated pine paneling is just one example by which they have sought
to add value to their pine lumber. Durgin and Crowell is a family business, and intends to remain
that way for the future generations. It recognizes the importance a sustainable, long-term log
supply. Therefore, Durgin and Crowell is a proud participant in the Sustainable Forestry Initiative®
(SFI®) sourcing program, seeking to promote and educate landowners and loggers about the
benefits of sustainable forestry. For more information: www.durginandcrowell.com
BOARDS
1x4 thru 1x12
5/4x4 thru 5/4x12
1x4 thru 1x12
5/4x4 thru 5/4x12
5/4X4 thru 5/4X12 1X4 thru 1X12 5/4X4 thru 5/4X12 1x4 thru 1x12
1x4 thru 1x12
5/4x4 thru 5/4x12
1x4 thru 1x12
1x4 thru 1x12
1x4 thru 1x12
1x4 thru 1x12
S4S
S4S
S4S
S4S
S4S S4S S4S S4S
S4S
S4S
S4S
S1S2E
S4S
S1S2E
C Select
C Select
D&Btr Select
D&Btr Select
Premium
Ultra Prime
Ultra Prime
Finish
Premium
Premium
Standard
Standard
Industrial
Industrial
ECB
ECB
WP4
WP4
Pattern 106
Pattern 106
Shiplap
Shiplap
Channel
WP11
Bevel Siding
Log Cabin Siding
Pickwick Paneling
S2S Flooring
Premium
Standard
Premium
Standard
Premium
Standard
Standard
Premium
Standard
Standard
Premium
Standard
Standard
Appearance
EASTERN WHITE PINE
DURGIN & CROWELL ENHANCE
AVAILABILITY, PERFORMANCE & RENEWABLE.
Enhance Advantages
• Profile sanding = more uniform surface coat
Advantages Of UV
• High Pressure Air Knife removes any dust
• More durable finish
• Vacuum Coater applies a uniform coating
• More scratch resistant
• UV curing eliminated any racking marks
• More resistant to chemicals
• 100% Solid Coating is free of harmful VOC’s
• More uniform gloss
• Denibing between coats eliminates raised grain
• Will yellow less
• Second coat totally seals the board
• Less shrinkage
• Available in Natural, White Wash & Almond colors
• Easy to clean
1x6
ECB
Premium
6’ , 8’
1x6
WP4
Premium
6’ , 8’
1x6 & 1x8 ECB
Premium
6’ - 16’ Random Even Lengths
1x6 & 1x8 WP4
Premium
6’ - 16’ Random Even Lengths
PATTERNS
1x6, 1x7, 1x8
1x6, 1x7, 1x8
1x6 & 1x8
1x4, 1x6, 1x8, 1x10
1x6 & 1x8
1x6 & 1x8
1x6, 1x8, 1x10, 1x12
1x6, 1x8, 1x10, 1x12
1x8, 1x10
1x6, 1x8, 1x10
1/2x6, 1/2x8
2x6 & 2x8
1x6-8', 1x8-8'
1x13" & Wider
2
9
3
EXOTIC HARDWOODS
Blue Star Products is a comprehensive line of Malaysian hardwood finish lumber for interior and exterior building
applications. Three sawmills and two moulding factories are operated in Peninsular Malaysia.
Since 1985, Blue Star has pioneered the development of imported hardwoods for the decking and construction trades
in the U.S. The company remains the ONLY fully integrated manufacturing and supply source for these products offering
more than 50 individual items.
Blue Star is also the only full-line producer of hardwood decking and related products that is fully certified by an
internationally recognized, continuously monitored program that is audited by an independent third party. All
timber used to manufacture Blue Star Products, and each of the facilities are 100% certified by the Malaysian Timber
Certification Council (MTCC), an independent organization established in 1998 to develop and operate a credible and
affordable certification program for Malaysian forest products. For more information about this program, please visit
www.mtcc.com.my.com. For more information, please visit www.mtcc.com.my.com and www.bluestardecks.com
Red Meranti Decking & Patterns
1x4 KD S4SEE KD S4SEE 1x4 1x4
KD T&G 1x4
KD ECB
5/4x4
KD S4SEE
5/4x4 KD T&G
1x6
KD ECB
1x6
KD T&G
5/4x6
KD S4SEE 5/4x6
KD S4SEE 1/2x6
KD BEVEL SIDING 1/2x6 KD PRIMED BEVEL SIDING 5/4x12
KD BULL NOSE STEPPING
8'-20' REL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
8'-20' REL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
6'-20' ROEL
Red Meranti Dimension & Boards
1x6 KD S4S
6'-20' ROEL
1x8 KD S4S
6'-20' ROEL
1x10 KD S4S 6'-20' ROEL
1x12 KD S4S 6'-20' ROEL
2x4 KD S4S 6'-20' ROEL
2x4 KD S4S 8', 10', 12', 16'
2x6 KD S4S 8', 10', 12', 16'
2x10 KD S4S 6'-20' ROEL
2x12
KD S4S 6'-20' ROEL
5/4x8 KD S4S 6'-20' ROEL
5/4x10 KD S4S 6'-20' ROEL
5/4x12 KD S4S 6'-20' ROEL
RED MERANTI ACCESSORIES
Balusters
2x2 2x2 3x3 3x3
2x2 2x2
S4S EE Spindles Spindles
S4S EE Primed S4SEE Primed Spindles 36", 48", 96"
36"
36"
36"
36"
36"
Posts
4x4 4x4 S4SEE Newel 4', 5', 6', 8', 10', 12'
54"
Lattice
4x8 4x8
Railings
2x3
2x4
2x4 2x4 2x4 2x4
2x4 2x6
Post Caps
4x4 & 6x6 4x4 & 6x6 Clear Heavy Duty Privacy Square
Clear Heavy Duty Privacy Diagonal
8', 12' 8', 12' 8', 12' 8', 12' 8', 12' 8', 12' 8', 12' 8', 12' Pyramid
Classic Flat Top
Coldwell Sub Rail
Top Rail
Bottom Rail
Combo Rail
Coldwell Victorian Rail
Coldwell Colonial Rail
Coldwell Bottom Rail
Top Rail
EXOTIC HARDWOODS
BLUE STAR PRODUCTS
Blue Star products have been the #1 choice in hardwood decking by East Coast builders for more than 20 years.
Now, you can buy this same product with a factory coating of Sikkens Cetol SRD, a premium penetrating oil finish
manufactured by the world’s #1 producer of wood finishes. Introducing: Blue Star Plus. Each piece of Blue Star Plus has
been uniformly coated, pressed, brushed and buffed on our custom designed pre-finish line. Every piece is hand wiped
and inspected, then carefully dried in a dust-free environment.
Blue Star Plus
1x4
KD S4SEE
5/4x4
KD S4SEE
5/4x6
KD S4SEE
8'-20' ROEL
8'-20' ROEL
8'-20' ROEL
Also reference Blue Star Products in the Decking section of the catalog.
4
100% CERTIFIED
MALAYSIAN HARDWOOD
5
ENGINEERED WOOD PRODUCTS
Simply A Better Window & Door Header!
•5-1/2” width for 2x6 construction
•Available depths 9-1/4” & 11-1/4”
•Value engineered for commercial jobs. Custom Depths Available.
•Full Thermal Break (Foam Core Construction) - R value of 20
•Right size every time. No cupping, twisting, or bowing. Less call backs for drywall problems.
•Available in lengths up to 24’ (Precision End Trim Offered)
•Bonded with exterior structural adhesive.
•One Piece Express Installation.
For more information: www.metsawood.us
WOOD I-JOISTS
Wood I-Joists for Residential Construction are engineered for longer spanning, superior performing and quieter floors.
I-Joists consist of 2” to 3 1/2” wide solid sawn or engineered wood top and bottom flanges connected by a structural OSB
web.
Our joists are Power Joists from Anthony Forest Products (www.anthonyforest.com)
ADI 40 (2 1/2” wide solid flange) (PRI40) 9 1/2” & 11 7/8” (14”, 16”)
ADI 60 (2 1/2” wide solid flange) (PRI60) 9 1/2” & 11 7/8” (14”, 16”)
ADI 80 (3 1/2” wide solid flange) (PRI80) 11 7/8”, 14”, 16” (18”, 20”, 22”, 24”)
ADI 90 (3 1/2” wide solid flange) (PRI90) 11 7/8”, 14”, 16” (18”, 20”, 22”, 24”)
Depths in ( ) are special order. Lengths to 52’ are available.
GLULAM (GLUED LAMINATED STRUCTURAL TIMBERS)
LAMINATED VENEER LUMBER (LVL)
Laminated Veneer Lumber (LVL) are structural members produced by laminating wood
veneers of approx 1/10" thickness together with exterior adhesive. All veneers are
orientated with grain parallel to long dimension of the member. LVL is commonly produced in 1 3/4" thickness which are
doubled or tripled using mechanical fasteners to create structural beams and headers.
We stock Masterplank 2.0E LVL from MetsaWood (www.metsawood.us) in a 1 3/4” width x 5 1/2”, 7 1/4”, 9 1/4”, 9 1/2”, 11
1/4”, 11 7/8”, 14”, 16”, 18”, 20” and 24” depths up to 48’ in length.
HANGERS
We have an extensive line of steel hangers from Simpson Strong-Tie Co. (www.strongtie.com) for
connecting LVL's and I-Joists to each other or to other supports.
Glulam is made from horizontally laminating nominal 2" lumber with a waterproof adhesive. Highest grades of lumber are
put into the upper and lower laminations where tension and compression requirements are the greatest and lower grade
material is used in the middle of the beam where stress requirements are less.
We stock an Architectural Appearance Grade Southern Pine glulam from Anthony Forest Products (www.anthonyforest.com).
The Architectural grade is the most commonly used grade for exposed beam applications and each beam is individually
wrapped.
Our inventory consists of:
3 1/8" width by 5 1/2", 8 1/4", 9 5/8" & 12 3/8" depths
5 1/8" width by 9 5/8", 11", 12 3/8", 13 3/4", 15 1/8", 16 1/8" & 17 7/8" depths
All available in lengths up to 48'.
We can special order depths up to 28 7/8" in 3 1/8", 5 1/8", 6 3/4", & 8 3/4" widths in an Industrial, Architectural, or Premium
Appearance grade.
SCAFFOLD PLANKS
Scaffold Planks are available from our stock in 1 3/4" x 9" x 16'. These planks are OSHA stamped, lightweight, have clipped
corners and pinned ends.
ENGINEERED WOOD PRODUCTS
METSAWOOD MASTER HEADER
Douglas Fir glulams in widths up to 12 1/4" and depths up to 58 1/2" in any grade can also be special ordered.
PRESSURE TREATED GLULAM
LOCK-DECK LAMINATED WOOD DECKING
Pressure Treated Glulam called “Power Preserved Glulam” from Anthony Forest Products (www.anthonyforest.com) are also
available. These are industrial grade southern pine glulam that are pressure treated with Hoover “Cop-Guard”. Beams are
treated for above ground use and columns have a ground contact retention. They carry a Hoover 25 year warranty.
Lock-Deck Laminated Wood Decking is a structural heavy timber roof decking from
Disdero Lumber (www.lockdeck.com) produced by face gluing laminations of KD
lumber and offsetting the center ply to form a tongue and groove.
It is available in nominal 3x6, 3x8, 4x6, 4x8, 5x6 & 5x8 in Douglas Fir/Larch, Inland Red Cedar, Ponderosa Pine and
Southern Pine. Can be obtained in three grades, Industrial (non appearance), Decorative (a high end STK) (95% of the
product is used in this grade), and Supreme (clear face). Product is end matched as well as edge matched with a smooth
or textured face, v-joint or square edges, and can be factory prefinished. It is usually sold in random lengths 6' to 16', but
specified tallies can also be accommodated. Lengths up to 32' can be obtained by utilizing structural end joints.
We stock the nominal 3x6 (2 3/16 x 5 1/4" actual) Douglas Fir/Larch, Decorative Grade, smooth face, EV1S, CM, EM, R/L
The following items are in stock:
3 1/2" x 9 1/2", 11 7/8" & 14" to 48'
5 1/4" x 9 1/2", 11 7/8", 14" & 16" to 48'
Columns 5 1/4" x 5 1/2" & 6 3/4" x 6 7/8" to 48'
ANTHONY POWER COLUMN
Power Column (www.anthonyforest.com) is a Southern Pine structural glued laminated timber manufactured in
accordance with ANSI A190.1 using Combination 50 layup combinations recognized in the 2005 National Design
Specifications (NDS) Supplement, Glulam Design Properties and Layup, APA Form Y117, and AITC 117. Power Column is used
primarily as columns, but can also be used as beams, headers, rafters, or purlins, and is manufactured in nominal widths and
depths of 4 through 12 inches, and lengths up to 24 feet.
Our inventory consists of:
3-1/2" x 3-1/2" x 8', 10', 12 ',16', 18' and 20'
3-1/2" x 5-1/2" x 8', 10', 12',16' and 20'
3-1/2" x 7" x 8', 10', 12', 16' and 20'
5-1/2" x 5-1/2” x 8', 10', 12', 16', 18' and 20'
5-1/2" x 7" x 8', 10', 12', 16' and 20'
7" x 7" (6-3/4"x6-7/8" Actual) x 8', 10', 12', 16' and 20'
6
7
DOUGLAS FIR
Douglas Fir is North America’s most plentiful softwood species. It is among the strongest and hardest softwood species
and possesses a light rosy color that is set off by its handsome grain pattern. Fir is unique among all softwood species
in that it is naturally dimensionally stable, having the ability to season well in position. The tough fiber makes it difficult
to work with hand tools. However, it responds very well to sharp power tools and machines to an exceptionally smooth,
glossy surface. Douglas Fir is a top choice for structural and decorative beams. Hood Distribution – The McQuesten
Group offers green and kiln dried S4S stock as well as green full rough timbers.
Architects and designers have long appreciated the rich visual quality of Douglas Fir and woodworkers have long
appreciated its excellent response to fine craftsmanship and finishing. Douglas Fir is often sawn to expose its vertical
grain. This is a technique of positioning the log to a certain degree off perpendicular to the saw. This method produces
a cut that reveals a uniform straight grain running the length of the board. The light rosy color of Douglas Fir, which
darkens over time when exposed to UV rays, is highlighted when vertical grain cuts are utilized.
Premium Exposed® products are graded on an in-house grade rule which exceeds WWPA’s standards for pitch, shake and
wane. Our material meets or exceeds the rigorous regulations set forth by the Oregon Forest Practices Act. Each piece
is end tagged “Premium Exposed®. Timbers are grade stamped on end to ensure clean face. Anti-stain and anti-mold
treated after being debarked and again when cut to size.
GREEN S4S STOCK
2x10
2x12
#2&Btr
#2&Btr
30', 32'
30', 32'
3x6
3x8
3x10
3x12
#1&Btr 100% FOHC, FOW “Premium Exposed”
16’, 20’, 24’
16’, 20’, 24’
16’, 20’, 24’
16’, 20’, 24’
4x8
4x10
4x12
8', 12', 16', 20', 24'
12', 16', 20', 24'
12', 16', 20', 24'
6x6
6x8
8', 10', 12', 16', 20', 24'
8', 10', 12’, 16', 20', 24'
KD S4S STOCK
2x6
2x8
2x10
2x12
Select Structural
Select Structural
Select Structural
Select Structural
16', 20'
16', 20'
16', 20'
16', 20'
4x4
4x6
#2&Btr “Premium Exposed”
#2&Btr “Premium Exposed”
8', 10', 12', 16', 20'
8', 10', 12', 16', 20'
GREEN FULL ROUGH TIMBERS
All #1&Btr 100% FOHC - 10'-40' lengths:
6x10
6x12
8x8
8x10
8x12
KD DOUGLAS FIR UPPERS
The C&Btr grade represents clear and nearly clear Douglas Fir products. Upper grade Douglas Fir may be specified as vertical
or flat grain. When unspecified, a combination of vertical and flat grain (mixed grain) is shipped. Upper grade Douglas Fir is
often utilized as flooring, paneling, interior trim, and cabinet work where rich, elegant appearances are desired.
5/8x4
5/8x4
5/8x6
5/8x6
C&Btr Ceiling
C&Btr Ceiling
C&Btr Ceiling
C&Btr Ceiling
Mixed Grain
Vertical Grain
Mixed Grain
Vertical Grain
1x4
1x4
1x4
1x4
1x4
1x6 through 1x12
C&Btr Center Matched Flooring
B&Btr Center Matched Flooring
B&Btr S4S Eased Edge
C&Btr S4S Eased Edge
C&Btr S4S
Mixed Grain
Vertical Grain
Vertical Grain
Vertical Grain
Vertical Grain
Vertical Grain
2x2 through 2x12
C&Btr S4S
Vertical Grain
4x4, 4x6, 6x6
C&Btr S4S
Mixed Grain
5/4x4
5/4x4
5/4x4 through 5/4x8
5/4x12
C&Btr S4S
C&Btr Stepping
Mixed Grain
Vertical Grain
Vertical Grain
Mixed Grain
DOUGLAS FIR
DOUGLAS FIR
For technical assistance visit:
www.wwpa.org
www.stimsonlumber.com
www.cdlumber.com
#2&Btr 26', 28'
#2&Btr 26', 28'
All #1&Btr 16'-40' lengths:
10x12
12x12
14x16
*Cutting services are offered to accommodate shorter lengths.
* Please reference our milling capabilities on page 12.
SPECIAL ORDERS
8
Douglas Fir can also be special ordered FOHC, Free of Wane, Special Sizes, Select Structural in all sizes, and Kiln Dried.
9
WESTERN RED CEDAR
Western Red Cedar offers the advantages of natural beauty, design flexibility, exceptional dimensional stability and long
term durability. Cedar has a long history of withstanding the rigors of time and weather. It is also a recognized structural
material with known mechanical and physical properties.
Grades of Western Red Cedar:
Clear Grades: Clear cedar has a limited number of natural characteristics and is specified when appearance of the highest
quality is desired. Clear grades of timbers are normally supplied green (unseasoned). When required, seasoning is achieved
by air-drying.
Knotty Grades: Knotty cedar presents a more rustic appearance and is typically supplied green (unseasoned) in the
appearance and structural grades. When required, seasoning is achieved by air-drying except for grades of Light Framing
and Structural Joists and Planks which are available kiln-dried.
Surface Textures:
Saw Textured: The saw textured surface, obtained during the milling process which uses either circular or band saws, is
present on all four sides.
Rougher Headed: The lumber receives its texture from a milling process which uses roughened planer knives. The rough
texture is clearly visible on all four sides.
Surfaced Four Sides (S4S): The smooth surface on all four sides presents a uniformly sized product with a high quality
appearance. Sizes from 2x4 up to 6x6 are generally available. Larger sizes are produced on special orders.
1x4 through 1x12
1x4 through 1x12
1x4 through 1x12
8'-16'
8'-16'
8'-16'
S1S2E
S1S2E
S1S2E
Clear VG
C&Btr (10-15% D)
STK
5/4x4 through 5/4x12
8'-16'
S1S2E
Clear VG
2x4 & 2x6
2x4 through 2x12
2x4 & 2x6
2x4 & 2x6
8'-16'
8'-20'
8'-20'
8'-20'
S4S
S4S
S4S
S4S
A&Btr
D&Btr
Premium Clear
Premium Select
4x4
4x4
4x4
4x6
6x6
8’, 10’, 12’ S4S
8'-16'
S4S Green
8'-16'S4S
8'-16'S4S
8'-16'S4S
A&Btr
D&Btr
STK
STK
STK
KD PATTERNS
1x6, 1x8, 1x10
1x4, 1x6, 1x8
1x4, 1x6, 1x8
1x8 & 1x10
11/16x6 & 11/16x8
8'-16'
8'-16'
8'-16'
8'-16'
8'-16'
Shiplap
WP4-V4E
WP4-V4E
Channel Rustic
Bevel Siding
STK
STK
A&Btr
STK
STK
TIMBERS
3x8
3x12
6x6
6x8
6x12
8x8
Our timbers come from Vancouver Island and are a blend of old growth
and 2nd growth cedar. A dark, rich red color, they offer beauty and
strength and can be used in many different ways. We see many of
them going into the outdoor patio application to offer partial shading
pergolas.
We have milling capabilities to dress the product and resize the timber.
Small orders can be accommodated.
AVAILABLE IN S4S OR ROUGH
Clear S4S (8’-20’ lengths)
4x4 / 4x6
6x6
Clear S4S (10’ – 20’ lengths)
3x8 / 3x10 / 3x12
4x8 / 4x10 / 4x12
Clear Rough (10’ – 20’ lengths)
4x4 / 4x6 / 4x8 / 4x10 / 4x12
6x6 / 6x10 / 6x12
8x8 / 8x10 / 8x12 / 8x14 / 8x16 / 8x20
10x10 / 10x12 / 10x14 / 10x16 / 10x18
12x12 / 12x14 / 12x16 / 12x18 / 12x20
For Technical Information visit: www.wrcla.org or www.realcedar.org
KD DIMENSION & BOARDS
With all these sizes of timbers in both Knotty
and Clear, we can fill any size order.
Clear & Knotty
Clear & Knotty
Clear & Knotty
Clear & Knotty
Clear & Knotty
Clear & Knotty
WESTERN RED CEDAR TIMBERS
WESTERN RED CEDAR
Knotty S4S (8’ – 24’ lengths)
4x4 / 4x6
6x6 / 6x8
ACCESSORIES
4x4-96"
4x4-54"
4x4-54"
4x4-54"
2x4 8' & 12'
2x4 8' & 12'
Clear Turned Porch Post
Clear Turned Porch Post
Clear S4S Post
Clear Newel Post Ball Top
Clear Moulded Handrail
Clear Combo Handrail
2x2-36"
2x2-36", 42", 48", 96"
Clear Spindles
Clear S4S EE Balusters
All W.W.P.A. patterns available by special order
Large cedar timbers available by special order
Knotty Rough (8’ – 24’ lengths)
6x8 / 6x10
8x8 / 8x10 / 8x12
10x10
KD CVG Rough R/L
7/4x4 – 7/4x6 – 7/4x8
5/4x6 – 5/4x8
* Please reference our milling capabilities on page 12.
PERGOLA STOCK
2X6, 2X8, 2X10, 2X12
16’ & 20’
STK
DECKING
5/4x6
5/4x6
10
8'-20'
8'-20' Green RED
Dry RED
STK
STK
11
CUSTOM MILLING
We maintain a significant stock of Douglas Fir and Cedar timbers to fill our customers’ needs. Our unique ability to
custom mill either our own inventory, or timbers provided to us to fit a customer’s specific needs, enables us to provide
quick turnaround for most milling needs. Once the material has been remanufactured, there is no guarantee of
grade, appearance or structural value.
Below are descriptions of the milling options we offer. We also offer custom milling services for your material with the
exception of reclaimed and/or previously installed timbers and pressure treated lumber.
ROUGH TIMBERS TO S4S:
The larger rough timbers can be milled to the standard
1/2” size measurement which produces a square edge,
uniform smooth surface while maintaining its grade. Due
to variation in the timber size you may encounter skip
dressing. Skip dressing is places on the timber where the
knives do not make the wood smooth.
PACKAGING:
Each order is carefully packaged with corners and protected
with shrink wrap when possible. The orders are also labeled
with the customer’s name to ensure proper shipment.
Baker “D” model resaw with 16” × 16” capacity:
Stetson-Ross Timber Sizer with 16” × 24” capacity:
Allows for larger capacity using 11/4” or 1½” blades with heads
on both of the conveyors so boards are cut on each pass,
minimizing down time and the time needed to return uncut
material.
Accurately sizes finished timbers to within 1/16 of an inch by
planing all four sides of a timber up to 16” x 24” x any length in
a single pass.
CUSTOM MILLING PHOTO GALLERY
HOOD MILLING EQUIPMENT
HOOD MILLING OPTIONS
ROUGH CLEAN FACES:
Typically the full rough timbers do not have a clean
consistent face so we will resaw up to four sides cutting
a slab off each side to expose the clean rough faces. For
a less costly option where rough sawn is required we can
resaw timbers which will produce 1 to 4 clean faces with the
remainder being natural rough faces which may be darker
in color.
CLEAN AND BRIGHT:
In this process we start with an S4S product which
measures to the 1/2”. We dress the timber down to the 1/4”
to eliminate any skip dressing and rough variations. This
produces a square edge with a uniform smooth surface.
12
SINGLE & DOUBLE TONGUE AND GROOVE:
We also have the ability to run material to a standard single
and double tongue and groove pattern. This is offered with
and without a V-Groove.
CUSTOM ROUGH AND S4S: With our stock timber
sizes we have the milling ability to resaw and surface from
the standard sizes into various special size requirements.
13
DECKING
This extraordinary decking is manufactured using SUNSHIELD, a technology developed 30 years ago for
the vinyl window industry. The result is a PVC cap stock decking that has a greater resistance to UV face,
surface degradation, stains, mold and mildew. At the core of this product is KORELITE, a 100% PVC which
makes CLUBHOUSE DECKING up to 25% lighter than most wood composites and adds superior strength.
CLUBHOUSE DECKING uses a dual color embossing process which produces a deck board with two colors,
one face, one edge presenting mulitple design options. The product has a random embossed pattern
with knot swirl definitions vastly different from the typical repeat patterns. A low gloss, matted surface
provides the appearance of authentic wood with cool pigment
technology to help reduce heat buildup. Choose from Earthtone or
Hardwood Collections for the look and color you want.
For more information: www.clubhousedecking.com
AVAILABLE IN A CHOICE OF COLORS AND FINISHES - BACKED BY A 25 YEAR WARRANTY*
The Hardwood Collection
Ironwood
Mahogany
Walnut
Ipe
The EarthTone Collection
100% coverage of the material for the
Sandstone
Clay
Four style-driven solid shades
that bring the look of painted
luxury without the need
for painted maintenance
Clubhouse Decking Features:
1) Sunshield Color Technology – designed
to stand up to the harsh effects of UV,
rain and humidity, keeps colors looking
deep and rich for longer.
2) Korelite – engineered for strength with
a higher density top and bottom – just
like an I-beam.
3) Warranty – backed by a limited,
transferrable lifetime warranty with 25
year limited fade and stain warranty.
4) Impact Resistance – rivals the
performance of the hardest woods
available.
5) Realistic Wood Grain Finish – deep
grain embossing patterns recreate the
warmth and beauty of natural wood.
6) Dual-Sided Boards – patented design
flexibility (boarders, framing stair treads
in different colors), lower inventory, and
more opportunity to use spare boards.
14
Cobblestone
Brookstone
Elite Railing Systems are beautifully engineered and longer lasting than painted wood components. Keeps that brand
new appearance year after year, with little more than an occasional rinse with the hose.
• Code approved (CCRR 0178)
• SunShield provides protection from heat and UV rays with time-tested color retention and superior stain, mold and
mildew resistance.
• Elegant routed details and a smooth low-gloss surface.
• Available in White, Walnut and Black.
Vinyl Railing Systems allow you to relax no matter what weather elements it is exposed to. The perfect complement to
today’s low-maintenance lifestyle.
• Code approved (CCRR 0185)
• SunShield provides fade and protection.
• Mix and match handrails, spindles and caps to create your own style.
• Available in White, Clay and Sandstone
For more information: www.clubhousedecking.com
* Backed by a 25 year fade and stain
warranty (one-time transfer) and
Four distinctive variegated grains
that mix or match to give you a truly
unique feel that’s all your own
CLUBHOUSE RAILING SYSTEM
DECKING
CLUBHOUSE DECKING PERFORMS BEAUTIFULLY!
first ten years followed by a gradual
prorated schedule throughout the
remaining warranty.
INCENSE CEDAR
Warm and Aromatic
• Incredible in its versatility, Incense Cedar can be used as paneling, decking, or timbers – all the while making a home feel
warm and inviting.
• It is beautiful sawn in rough and smooth surfaces.
• Fine uniform texture.
Exterior Stability
• Resists decay and stands up to high humidity and moisture. Other woods must be injected with oils or chemicals to match the natural longevity of our Incense Cedar.
• Rates high in checking, weathering, warping, and insulation values.
• Our decking is dried to an average of 19% moisture content for a dependable and stable product.
• Incredible stability and durability.
• Natural light color; excellent stain-holding properties or will turn silvery grey if left untreated.
• Available accessories in 2x2 36" balusters, 4x4 8' posts, 2x4 8' handrail, and 1x10 10' fascia.
Available in: 5/4x6 Decking Select Tight Knot
IPE
• Ipe Decking brings together the qualities of low-maintenance, maximum durability and extraordinary natural beauty to
offer the best decking product available.
• Defined by its rich dark brown color and beautiful grain, Ipe Decking can be oiled or stained to retain its natural color.
Left untreated, Ipe Decking will gradually age to a silver-grey.
• Ipe Decking contains no harmful chemicals and can be used near water without fear of contamination. Ipe’s strength
and durability also has a natural resistance to decay, all varieties of wood boring insects and wet conditions.
• Ipe has a Class A fire rating, the same rating as concrete or steel.
• Ipe Decking is the strongest untreated decking available, which makes it the perfect choice for both residential and
commercial applications.
Available in: ALL DECKING PROFILES AVAILABLE GROOVE ON GROOVE
1x4 S4S EE REL
5/4x4 S4S EE REL
1x6 S4S EE REL
5/4x6 S4S EE REL
15
DECKING
Dark Red Meranti is prized by European architects for high-class joinery applications. These species provide the ultimate
combination of beauty, versatility, performance and economy for decking and related products. They mill to a superior
surface, work easily, absorb and hold finish deeply and evenly. The timber ages to a smooth surface, with less checking
(cracking) than other harder, heavier, and more expensive species.
All Blue Star Decking Products are shipped kiln dried, manufactured on high-speed equipment to a moulding quality finish,
packaged in protective crating and graded to specifications, per the Malaysian Grade Rules for hardwood lumber (clear 1
face and better). Blue Star is the only full-line producer of hardwood decking and related products that is fully certified by an
internationally recognized, continuously monitored program that is audited by an independent third party. All timber used
to manufacture Blue Star Products, and all our facilities are 100% certified by the Malaysian Timber Certification Council.
Blue Star products have been the #1 choice in hardwood decking by East Coast builders for more than 20 years. Now, you
can buy this same product with a factory coating of Sikkens Cetol SRD, a premium penetrating oil finish manufactured by
the world’s #1 producer of wood finishes. Each piece of Blue Star Plus has been uniformly coated, pressed, brushed and
buffed on our custom designed pre-finish line. Every piece is hand wiped and inspected, then carefully dried in a dust-free
environment.
Dark Red Meranti available in:
1x4 S4S EE ROEL, REL
5/4x4 S4S EE ROEL, REL
5/4x6 S4S EE ROEL, REL
With Sikkens Cetol SRD Coating:
1x4 S4S EE ROEL
5/4x4 S4S EE ROEL
5/4x6 S4S EE ROEL
For more information visit: www.bluestardecks.com
100% CERTIFIED
MALAYSIAN HARDWOOD
WESTERN RED CEDAR
Western Red Cedar offers the advantages of natural beauty, design flexibility, exceptional dimensional stability and long
term durability. Cedar has a long history of withstanding the rigors of time and weather. It is also a recognized structural
material with known mechanical and physical properties. These attributes allow the design of timber structures of all types
using basic engineering principles and stress- or appearance-rated grades of cedar.
Architectural Knotty
Durable, well manufactured Western Red Cedar decking that comes ready to use. This sound and tight knotted decking
limits both the size and quality of characteristics to meet the highest buyer expectations. The smooth, skip-free dressing
over the entire face makes it the ideal deck surface. The top choice where the natural beauty and lasting charm of a knotty
deck are desired. Available KD or Green.
Available in:
5/4x4 and 5/4x6
STK
Radius Edge Decking
Green
5/4x6STK
Radius Edge DeckingKD
For more information visit: www.selkirkspecialtywood.com
Incense Cedar has a wide range of qualities and uses and is highly rated in a majority of physical properties used to
classify wood. These include natural durability, stability, shrinkage, checking, weathering, warping, insulation value
and workability. Not to mention that its warmth, its natural beauty and even its aroma can turn a room into a haven of
comfort and security. These are attributes recognized by Native Americans and the early settlers of the Northwest. In
recent years, Incense Cedar has been marketed as Western Cedar. This caused many people to believe that Incense Cedar
was no longer available. Now it is being produced and marketed as actual Incense Cedar and has the availability and
ability to meet the demand that is sure to grow.
Warm & Aromatic
• Incredible in its versatility, Incense Cedar can be used as paneling, decking, or timbers – all the while making a home feel warm and inviting.
• It is beautiful sawn in rough and smooth surfaces.
• Fine uniform texture.
INCENSE CEDAR
INCENSE CEDAR
DARK RED MERANTI
Exterior Stability
• Resists decay and stands up to high humidity and moisture. Other woods must be injected with oils or chemicals to
match the natural longevity of our Incense Cedar.
• Rates high in checking, weathering, warping, and insulation values.
• Low shrinkage.
• Incredible stability and durability.
• Natural light color; excellent stain-holding properties or will turn to a silvery grey if left untreated.
Patterns / Siding
• Manufactured in rough or smooth surfaces.
• Perfect for interiors and exteriors.
• Select tight knot grade.
INCENSE CEDAR DECKING & ACCESSORIES
Stability, durability and a fine, uniform texture make Incense Cedar a popular choice for quality deck projects. Look to
our line up of Incense Cedar decking and accessories and you’ll be pleased to find:
• A moisture content of just 15-19% for a dependable and stable material.
• Always tight-knot, high-line, appearance-grade lumber.
Decking:
Accessories:
Pattern Stock:
5/4x6
8’, 10’, 12’, 14’, 16’
2X2 S4SEE36”
2x4
S4S
8’ & 12’
2x6
S4S
8’ & 12’
4x4
S4S
8’ & 10’
1x6 WP4
6’-20’
2x6
T&G
12’ & 16’
2x8
S/L
6’-20’
Radius Edged
Balusters
REL
Loft Grade Roof Deck
REL Log Cabin Siding
It’s ironic, to say the least, to head for the outdoors and then spend it on a plastic deck. Especially when there’s Incense
Cedar Decking. Smooth on the most tender toes, it’s as sweet and natural as the outdoors itself. And there’s no need for
stains or harsh cleaners – it naturally resists decay. So get real. Choose Incense Cedar, and breathe deep.
16
17
PRESSURE TREATED PRODUCTS
2x2
2x2
2x2
2x2
S4S
Spindles
S4S
M1E, M2E
36", 42", 48", 96"
36"
36", 42", 48", 96"
42"
Clear Grade: Clear grade lattice is made entirely of smooth-sawn clear lath. An occasional bird’s-eye or pin knot is
permitted, but no holes, wane, splits or stains are allowed. These panels are assembled with glue-coated stainless steel
fasteners to eliminate rust stains.
ACCESSORIES
Moulded Handrail
Step Stringers
Colonial Porch Posts
Colonial Balltop Newel
Colonial Lamp Post
No. 1 Grade: These lattice panels contain a substantial proportion of clear lath, but allow sound knots and other minor
wood defects. These panels are assembled with glue-coated galvanized fasteners.
2x4 8' & 12'
3, 4, 5
3-1/4" x 8'
48" & 54"
4-1/8 & 5-1/8" x 8'
WOODWAY DECKRAIL SYSTEM
Available in clear, kiln-dried Western Red Cedar and Mahogany, the Woodway Architectural Deckrail Series adds
refinement and distinction to every outdoor railing project. The Woodway Architectural Deckrail Series features preassembled railing panels in five patterns. Each pattern is manufactured using mortise and tenon joinery and is secured
with urethane glue. The panels are available in net 44-1/2", 68-1/2" and 92-1/2" fixed lengths to fit 3-1/2" posts measured
on 4', 6' and 8' centers. Panel patterns are available in net panel heights of 30" and 36" suitable for finished rail heights of
over 36" and 42" respectively.
PT PLYWOOD
4x8 1/2 CDX
4x8 5/8 CDX
4x8 3/4 CDX
4x8
4x8
4x8
Available in Privacy spacing (70% shade – 1.75" nominal openings) and Garden spacing (50% shade in square pattern;
60% shade in diagonal pattern, 2.5" nominal openings).
Woodway lattice is available in 4x8 panels in Clear & #1&Btr grades in Western Red Cedar; Mahogany; ACQ Treated HemFir; and Douglas Fir. Regular lattice thickness measures nominal 1/2" at lath intersections, while Heavy Duty measures
nominal 1".
PT BALUSTERS
Clear
Clear
#1
#1
WOODWAY LATTICE
1/2 ULC
5/8 ULC
3/4 ULC
DIMENSION & DECKING
5/4x6
2x4 through 2x12
2x6 through 2x12
4x4
4x6 & 6x6
1x4 & 1x8
S4S EE
Clear, Premium & Standard8'-16'
S4S#18'-20'
S4S#28'-20'
S4S#18', 10', 12'
S4S#28'-16'
S4SD&Btr16'
PT TIMBERS
8x8
6x8
4x8, 4x10 & 4x12
Rgh or S4S
S4S
S4S
12', 16', 20', 24'
12', 16', 20'
12', 16', 20'
Ladd’s Addition
Irvington
2x4x6' & 8' Top Rail & Bottom Rail Laurelhurst
Lair Hill
SPECIALT Y WOOD PRODUCTS
The chemical used in our Pressure Treated Products (Copper Azole, CA-C) is accepted in all New England states and New
York, has achieved AWPA approval, has a documented low rate of corrosion (under conditions specified in AWPA E12-94),
and record of remaining in good saleable condition through the season.
Council Crest
2x3x6' & 8' Sub Rail
WOODWAY EZ RAIL SYSTEM
The versatile EZ RAIL Stair Rail System adjusts to any stair pitch in seconds. Simply align the bottom rail parallel with the
existing stair pitch, trim to fit, and the EZ Rail System is ready to attach. It just doesn’t get any easier than this! Made from
Western Red Cedar or Mahogany.
• EZ Rail is designed to cut labor costs and increase profits
• Installs in minutes right out of the box, leaving more time for more jobs.
• Millwork quality at a site-built cost
• Available in either a stair or deck rail option
• Doesn’t require highly skilled labor, so you can use your best carpenters for the tough stuff.
6' Pre-assembled Rail Sections and 6' Pre-assembled Pivot Stair Sections
8' Pre-assembled Rail Sections
Net Length: 69-1/4", Net Height: 32-1/2"
Net Length: 93-1/4", Net Height: 32-1/2"
WOODWAY QUICK CLAD POST SLEEVES
Quick Clad Post Sleeves are designed to quickly upgrade the appearance of posts and railings with a professional,
finished look. Choose from either Western Red Cedar or Mahogany Post Sleeves. They are already assembled and cut to
length for residential and commercial rail heights. Each Woodway Quick Clad Post Sleeve comes fully assembled and
individually cartoned with pre-cut base molding included. Installation couldn’t be easier. Simply remove the post sleeve
from the carton, slip over the existing post, shim the bottom and top and you’re ready to add the pre-cut base molding
and the post cap style of your choice.
• Available in Clear A&Btr Kiln-dried Western Red Cedar and Clear Kiln-dried Mahogany
• Comes in 40" and 48" lengths
• Fully assembled and individually cartoned
• Pre-cut base molding included
• Solid construction and joinery with waterproof exterior adhesive
• Quick shim system makes it easy to correct out-of-plumb and misaligned posts
For more information: www.woodwayproducts.com
18
19
Premium Fencing. Crafted of 100% Select, tight-knot Western Red Cedar for natural resistance to rot and decay.
• Sturdy Diagonal Privacy patterned lattice top with nominal 1-7/8" openings
• Nominal fence panel thickness: 2-1/2"
• Nominal fence dimensions: 68-5/8" height, 91-1/2" width on center
• With proper installation and routine maintenance panel will not rot or decay for a minimum of 20 years.
• 20 year warranty against manufacturer defect
• Sturdy sandwiched frame with tongue and groove fence boards
• Lattice that’s built to last with opposed-angle stapling and glue-coated fasteners means maximum durability, fewer call-
backs and positive referrals from your customers for years to come.
Available in: • Diagonal Lattice Top 8' x 6'
• Tongue & Groove Top 8' x 6'
• Diagonal Lattice Top 4' x 6'
• Tongue & Groove Top 4' x 6'
Panel Screen – Moderna Pattern.
• Privacy Screening with aesthetic appeal
• Space definition for outdoor living, deck, patio, fencing and more
• Heavy duty, kiln-dried and sanded Clear Western Red Cedar
• 100% glued and stapled intersections
• Interior/exterior use
• Stainless steel fasteners
• Cedar is naturally rot resistant
RED CEDAR SPLIT RAIL FENCING
Rustic Hand Split Western Red Cedar Post & Rail has enough of its own natural resins, tannins, preservative and oils in the
wood cells which make it highly resistant to insects, fungus, rot and effects of moisture. It is actually split to preserve the
natural beauty and texture that makes this fence so attractive.
Standard/Pony Split Corner Post
Standard/Pony Split End Post
Standard/Pony Split Line Post
Standard/Pony Split Rail 10'
Available in 2-hole or 3-hole posts.
ROOF AND FLOOR DECKING
KD Doug Fir Select Decking: Excellent product run from Select Structural Stock. Good choice when being used with our
Douglas Fir timbers. Loft Grade. Available 2"x 6"– 12' & 16'.
KD Lodgepole/Ponderosa Pine: Select Decking. An excellent western pine product that has been the choice of many
customers for over 20 years. Available 2"x 6"– 12' & 16'.
Dry Eastern Spruce: A good quality economical decking. Loft Grade. Available 2"x 6"– 12' & 16'.
KD Southern Pine: #1 Prime. Loft Grade available in 2"x 6" and 2"x 8"– 12' & 16'.
Western Red Cedar: STK, WP4. Available in 2"x 6"– 6' & 16'.
1'x1' Deck Squares. The only outdoor deck tile crafted from Clear grain, sanded Western Red Cedar with an interlocking
plastic base. Deck Squares are an ideal way to add warm and inviting wood to any walking surface, veranda, patio or entry
way. It also serves perfectly as a base for potted plants or in any location where improved drainage is needed.
ATLANTIC WHITE CEDAR
Gates Custom Milling Inc, established in 1978, is the largest producer of Atlantic White Cedar products in the country.
GCM’s cedar and cypress product lines are made up of a variety of items including decking, exterior siding and interior
paneling products.
DECKORATORS & WOODWAY POST CAPS
Available in Cedar, Mahogany and Pressure Treated:
4x4 & 6x6
High Point, High Plateau, Ballcap
Victoria Metal Top:
4x4
Pyramid, Classic, Copper High Top, Ballcap
Newport: Hatteras:
4x4
Casco Flat, Flat, Copper Top, Pyramid
Woodway: 4x4 & 6x6
Cedar & Mahogany, Pyramid & Classic
1x4 T&G EV1S Hatteras Tight Knot
Special order patterns available.
WOODWAY SPECIALTY PRODUCTS
1/2x6 Select Tight Knot Bevel
For more information: www.woodwayproducts.com or www.deckorators.com
CLEAR FJ RADIATA PINE TRIM BOARDS
ASHTON LEWIS YELLOW PINE FLOORING
Manufactured with State-of-the-Art Machinery
• Steam dried to approximately 12% moisture content
• 8-Head Weinig moulder affords highest level milling and appearance
• Each individual bundle shrink wrapped with acclimation instructions
Superior Appearance and Strength Qualities
• 100% Southern Yellow Pine
• Vertical grain available on an accumulation basis
• Pulled from export grade rough stock
For more detailed information: www.ashton-lewis.com
1x4 – 1x6 – 1x8 – 1x10
1x4 – 1x6 – 1x8
1x4
5/8x4
5/4x10 – 5/4x12
5/4x12
C&Btr Kerfback
#2 Select Hollowback
C&Btr Vertical Grain
C&Btr Edge & Center Bead (ECB)
C&Btr Stepping
#2&Btr Stepping
• Available in 1x4 – 1x12; 5/4x4 – 5/4x12; 1x6 ECB - All 16' Lengths
• Suitable for interior or exterior applications
• 100% clear wood fiber - No knots allows resizing with little waste
• Two sand/buff processes
• Two coats of primer – factory applied – 5 mil dry
• Consistent sizing
• Additional sealing process to minimize grain raise allowing extra smooth finish
HARDWOOD STAKES
1" x 1"
4' & 6'
20
21
Finished wood products are only as good as the timber they come from. That’s why
customers count on the quality and rich, true color that can only be found in lumber
manufactured by Inter-State Hardwoods. Located in one of the most vast, natural
environments for fine quality hardwoods – Northern Appalachia – Inter-State Hardwoods has
seen decades of experience and expertise in crafting hardwood lumber used by some of the
finest wood craftsmen in the world.
Consistency is one of the most important factors that determines quality. This consistency
starts with the fact that much of the timber land is owned and other land with timber rights
are centrally located within a 100 mile radius of the sawmill. This means lumber today and
then again a year from now will be lumber from the same region, dried using the same
process and processed on the same equipment. This provides a consistent product with a
clear face that if offered in random even lengths.
Color is another major contributing factor relating to the quality of these boards. Due to
the region the lumber is harvested from, the growing season is short in comparison to the
Southern and Mid-Atlantic States. The short growing season does not allow for the timber
from this region to absorb as much of the earth’s minerals; therefore, preserving more of the
natural colors of the wood specie.
Demand the Appalachian Standard:
The Appalachian Standard identifies the four key aspects of Appalachian Hardwood species
and what these attributes mean to wood manufacturers. These are: Sustainability, Consistent
quality, Greater yield, Made in the United States of America. On their own, each of these
standards are important. The combination of these four make Appalachian the point of
comparison for all hardwood lumber needs.
Poplar1x4 through 1x8500' units
Poplar
1x10 through 1x12 & 5/4x4 through 5/4x12
250’ units
Red Oak1x4 through 1x12250' units
Maple
1x4 through 1x8
250' units
Cherry
1x4 & 1x6
250' units
Primed Solid Poplar
1x4 through 1x12
500' units
For more information: www.inter-statehardwoods.com
GREENGUARD RAINDROP 3D HOUSEWRAP
• With the emphasis on moisture managed wall systems, the first cross woven housewrap branded as
Raindrop was developed.
• GreenGuard® RainDrop™ is the first ever housewrap with drainage channels that actually move water
away from the wall allowing potentially harmful moisture to exit the wall. It is good for all types of
siding including brick and stucco.
• In addition to providing superior drainage, RainDrop is an air and moisture infiltration barrier.
By preventing air and moisture from penetrating the wall cavity, RainDrop preserves the energy
efficiency of your home.
• RainDrop’s unique construction allows the product to “breathe” so that potentially harmful moisture
vapor can escape the wall cavity.
• RainDrop is lightweight, so it is easy to handle; translucent, which makes it easy to locate studs, edges,
corners, and openings; can be nailed or stapled; and the green color reduces glare, making it easy to
work with on bright, sunny days.
• The last unique property is its cost, which does not differ greatly from that of traditional house wrap.
• Available in 9x125 rolls.
For more information: www.green-guard.com
REX SynFelt
Manufactured from pellet to the roll.
Cost will reflect substantial savings over competition!
• 100% Polypropylene
• Most slip resistant in the industry due to a proprietary formulation and unique walking pattern.
• 28 lbs per roll – 10 times lighter per square than 30# roofing felt.
• 10 squares per roll – 48" wide x 250 lineal feet
• 5 squares per roll – 48" wide x 125 lineal feet
• 20 times stronger than felt. Highest cross directional tear resistance in the industry.
• Can be left exposed for up to 6 months with no degrading
• 25 year warranty
• Lays flat and is water resistant. Superior drapability in valleys, on ridges and hips.
• Preprinted nailing pattern and overlap lines to speed installation.
• Class A fire rating.
• Saves up to 50% time in labor installation.
SPECIALT Y BUILDING PRODUCTS
HARDWOOD BOARDS
For more information: www.rex-synfelt.com
YARDCRAFTERS – Safety & Style!
Yardcrafters Railing Systems are engineered to exceed the most demanding requirements in the
toughest building codes. Top and bottom rails are reinforced with structural grade galvanized steel
(to ASTM A653). The result: a safe, sturdy and reliable railing system. Where accessibility is required,
Yardcrafters Continuous Handrail provides an ergonomic, 1-1/2” diameter secondary gripping surface
that meets all ADA and building code requirements for both residential and commercial uses.
22
Enhance any home with timeless Classic 1-1/2” square balusters, or choose the distinction of Old World
craftsmanship with turned Colonial spindles. Yardcrafters Railings Systems can be used for stairs, ramps,
walkways, porches and decks.
• 6’, 8’ & 10’ Top & Bottom Rail & Baluster Kits
• 36”, 42”, 60”, 96” & 120” Universal Posts
• 5x5-108” Structural Colonial Porch Post
• 36” & 42” Square Balusters & Colonial Spindles
• 6’ & 8’ Top & Bottom Stair Rail & Baluster Kits
• 36” Square Stair Balusters & Colonial Stair Spindles
• Post Trim & Post Caps
For more information: www.amerimax.com
23
SPECIALT Y BUILDING PRODUCTS
Patented, Collated, Stainless Steel, Hidden Fastener Decking System
Don’t be left out in the cold on your hands and knees, wishing for a better way… It’s here!
All other hidden deck fasteners are installed by hand, ONE piece at a time. They ALL require nails or
screws to secure them, also handled ONE at a time.
HIDfast is the fastest, easiest way to get a fastener free surface for a lasting, beautiful appearance.
Patented, worry-free stainless steel fasteners are collated for easy handling and quick loading. Patented
pneumatic tool that delivers precise, consistent, effortless installation.
• Can install 8 boards 8 feet long in a little over 3 minutes – That can be up to 80% faster than
conventional screws!
• No visible fasteners on the surface of the decking for better appearance.
• No surface fasteners that may pop up.
• No surface penetrations that allow water in, causing rot, splitting & cracking.
HIDfast Decker Tool
Fastner Options:
HF2.5 – 1/8" spacer
(175 pcs (100 sf)/box) (4 boxes/case)
HF2.5WG – 1/4" spacer
HF2.75TG
HF3 – 1/8" spacer
HF3W – 1/4" spacer
For more information: www.hid-fast.com
STYROTECH FOUNDATION COATINGS
Foundation Insulation Systems
FLEXCOAT is a pre-mixed, pre-colored ready-to-use foundation insulation coating.
It’s 100% acrylic, highly flexible, and has excellent resistance to cracking, peeling and flaking. FLEXCOAT
bonds to rigid polystyrene insulation, brick, block, drywall, plywood and concrete and comes in three
premixed colors: White, Lite Gray, and Foundation Gray Custom colors are also available upon request.
The product is easily applied with a brush and cleans up with soap and water. (Brush & mesh tape sold
separately)
BRUSH ON COATING KIT ST (Just add water)
The Brush On Coating Kit ST brings with it all the years of solid performance of the Original Brush On
Coating Kit. By incorporating a high performance dry polymer which is already blended into the dry
mix, Brush On Coating Kit ST has a better bond to the polystyrene. Now you can just add water and start
brushing on your coating. This new formula does not have to be kept from freezing during storage.
Ready to use kit!
SHAKERTOWN
The Shakertown® Craftsman 1-Course Cedar Shingle Panel is the newest development from the company that brought you the original
cedar shingle panel. Manufactured using only the finest Western Red Cedar vertical-grain heartwood, the Shakertown Craftsman Panel
features a full plywood back, a thick 3/8" shingle butt and over-locking end-joints for a seamless appearance.
Shakertown Craftsman Panels go up 6 times faster than individual shingles and can be installed with a pneumatic nailer. The blind/
concealed nailing creates a true, traditional shingle appearance.
The panels are 8' long and available in an exposure size of 7" and 4-1/2". Shakertown Craftsman Panels are constructed with a classic
keyway joint or tight contemporary joint between shingles.
With the rising cost of the individual R&R’s, the gap per square on material cost has narrowed considerably and when you factor in
labor and waste, Shakertown Craftsman Panel is the real winner. The redesigned single course panel with the concealed nailing full
plywood back and shiplap over-locking end-joint has finally answered any of the field application concerns. Keep in mind the ability to
prestain, custom color or primer the 8' panels with no concerns of coverage and dripping that you had with the 2 or 3 course panels.
For more detailed information: www.shakertown.com
IKO
Cambridge 30 AR: Premium architectural shingle. Provides durability, low maintenance and the great looks of a shake-like
appearance at a very attractive price. Cambridge 30 AR carries a limited 30-year warranty.
Cambridge LT: Laminated fiberglass asphalt shingles. Their extraordinary dimensional thickness creates a high-definition, natural
“shake” look and profile. Cambridge LT carries a limited lifetime warranty.
Marathon Ultra AR: Traditional 3-tab design shingles are a perennial favorite due to their reliability and proven track record. Marathon
Ultra AR carries a limited 30-year warranty.
AM Heavy Duty Metric: AM No. 30 lb Metric: Heavyweight, saturated felt paper. Organic asphalt composition.
Leading Edge: Shingle Starter Strip. Installs along the eaves and rakes giving you a straight guide for laying the first course of shingles
and trimming the overlying courses. The sealant strip along their bottom edge creates a tight seal to protect shingle ends against wind
damage and reduce shingle blow-offs.
Hip and Ridge: Heavy weight shingle composited of a resilient, inorganic glass base that is coated and permeated with additional
weather-resistance asphalt. As a perforated, four-piece, traditional hip and ridge shingle, it provides the assurance of long-lasting
performance and is surfaced with ceramic colored granules, which protect the asphalt from ultraviolet radiation.
ArmourGard Ice & Water Protector: Used for waterproofing under shingled roofs preventing water penetration due to ice dams
or wind-driven rain. It can also be used as an underlayment around chimneys, dormers, vent stacks, skylights and other roof-top
structures or apertures, around doors and windows, and as an exterior vapor barrier for foundations and basements.
For more information: www.styro.net
GoldShield Ice & Water Protector: A superior self-adhesive membrane, protected by a silicone treated release sheet that’s easily
removed during application. It is surfaced with a unique treated film to provide a non-slip surface. Ideal for waterproofing purposes
under shingled roofs and specifically for protecting potential ice dam areas. It can also be installed around vent stacks, dormers and
other roof-top structures.
EX-Cel Exterior PVC Trim
Roof-Fast Base MA: Is constructed using an inorganic reinforcing mat of durable, high strength non-woven glass fibers, which is
coated and impregnated with SBS modified bitumen. The surface is covered with a thin poly-film, while the underside is sanded to
prevent sticking in the roll. Roof-Fast Base MA can only be used as the base sheet in a Roof-Fast system.
EX-Cel is available in smooth or wood grain texture and can be bent for curved applications. Does not
have to be painted and will never rot, crack or deteriorate even in high moisture applications. Through
a unique bonding process, the broadest and richest color palette ever developed for cellular PVC is
offered. Durability is achieved through a unique surface technology developed in conjunction with
Sherwin-Williams. The water-based, solar-reflective coating is extremely durable and will not peel, crack
or chip. This finish protects the PVC against UV exposure so that it never warps or twists in the sun. EXCel carries a 25 year warranty on both the material and the finish.
SHINGLES
HIDFAST
Roof-Fast Cap: Is a low-slope roofing material that combines the polymer chemistry of commercial grade modified bitumen
membranes with the self-adhesive characteristics of an ice and water protector and the beauty of a granule surfaced shingle.
For more detailed information: www.iko.com
For more information: www.excelbyjain.com
24
Trim: 1” & 5/4 thicknesses, 3” – 12” widths, 18’ lengths, smooth & wood grain
Corner Board: 1” & 5/4 thicknesses, 4” & 6” widths, 20’ lengths, smooth & wood grain
Sheet: ½” – 5/4 thicknesses, lengths from 8’ to 20’, smooth & wood grain
Moulding: Multiple profiles and shapes available
25
SHINGLES
SPRUCE
With its numerous properties (e.g. decay resistance, high insulation, lightness, etc.) white cedar (thuya occidentalis) is the ideal
choice for roofing or exterior siding. Its natural oils protect against mold, moisture and insects, thereby ensuring a longer life.
Cedar shingles age beautifully, even when left untreated. They enhance the beauty of a home while blending perfectly with
other natural materials such as stone and brick.
Spruce lumber is relatively soft; however, the strength is especially good in comparison to the weight. The texture is very
uniform with light tan heartwood and off-white sapwood. White Spruce, Red Spruce, and Black Spruce can be found
all over the Northern United States, Canada, and Alaska. These three species are usually mixed together and traded as
Eastern Spruce. Spruce is primarily used in general carpentry and light construction applications.
SBCs High End Regular Eastern White Cedar Shingles features smoother Faces & Butts, wider shingles, 5" exposure, more
consistent thicknesses and a consistent mill source.
European Spruce is also available and has one of the highest stiffness-to-weight ratios of all the Spruces. This
characteristic promotes a high level of performance associated with this specie of wood. European Spruce is primarily
traded as mixture of Norway Spruce, White Spruce, and Scots Pine. Euro Spruce is marketed as possessing a pleasing
appearance, fine grain, smaller knot sizes, and less warp and twist in relation to other members of the Spruce family.
Eastern White Cedar Shingles are available in four grades, each having its own distinctive features and applications:
Grade:
Characteristics:
Uses:
Extra “A”
Top Grade – No Imperfections
Roofing & Siding
Clear “B”
Select Grade – No imperfections on
Siding
exposed surface (up to 6")
2nd Clear “C”
Economy grade. Some sound knots
Siding
on exposed surface.(Rustic Appearance)
Utility “D”Lowest Grade – Various Multipurpose:
imperfectionsundercourse, shims
(10/10, shims)
1-1/2 Shims
10/10 Utility Undercourse
16" Extras, Clears, 2nd Clears and Extra R&R
Special Stain Colors available
2x4
2x6 2x8 2x10 2x12 10'-16' 8'-20' 10'-24' 8'-24' 8'-24' S4S S4S S4S
S4S S4S #2&Btr
#2&Btr
#2&Btr
#2&Btr
#2&Btr
1x3 8'-16' S4S #2&Btr
2x4 2x6 92-5/8" & 96" 92-5/8" & 96" S4S S4S Stud
Stud
1x6 Random Length ECB/WP4 #2&Btr
For more detailed information: www.sbccedar.com
2x6 2x6 8'-16'
8'-16' T&G Decking T&G Decking #2&Btr
Select
WESTERN RED CEDAR SHINGLES
1/2x6 1/2x6 16' 16' Bevel Siding Primed Bevel Siding #1 Merch
#1 Merch
Shingles and shakes produced from Western Red Cedar (Thuja Plicata) have long been the premier wood roofing material of
North America. The majority of cedar roofs remain untreated and are known to provide excellent service.
SPRUCE
EASTERN WHITE CEDAR SHINGLES
NO. 1 Blue Label: The premium grade of shingles for roofs and sidewalls. These top-grade shingles are 100% heartwood,
100% clear and 100% edge-grain.
NO. 2 Red Label: A good grade for many applications. Not less than 10" clear on 16" shingles, 11" clear on 18" shingles and
16" clear on 24" shingles. Flat grain and limited sapwood are permitted in this grade.
NO. 1 Handsplit & Resawn: These shakes have split faces and sawn backs. Cedar logs are first cut into desired lengths.
Blanks or boards of proper thickness are split and then run diagonally through a bandsaw to produce two tapered shakes
from each blank.
NO. 1 Tapersplit: Produced largely by hand, using a sharp-bladed steel froe and a mallet. The natural shingle-like taper is
achieved by reversing the block, end-for-end, with each split.
Certi-Guard Fire Retardant Cedar Shakes and Shingles: No. 1 Certi-Guard shingles and No. 1 Certi-Split shakes are
available pressure-impregnated with fire-retardants and meet testing standards developed by Underwriters Laboratories
and adapted by the National Fire Protection Association. Certi-Guard may be used for Class A, B and C roof systems.
18"
18"
24"
Please visit www.HoodDistribution.com
Our website is continually being updated with information we you find helpful, informative and useful in conducting
your business or completing your project. There is a great deal of information on the site to include the following items
we would like to highlight:
• Complete electronic product catalog
• Monthly flyers/specials by location
• Account set-up information
• Supply partner web links
• And much, much more
Your business is very important to us. We strive to be an industry leader in not only the timely supply of materials, but
also the product knowledge regarding it. You are considered more than a customer to our organization; we view you as
business partners.
#1 R&R, #1 Perfections, #1 Pressure Treated Perfections, #1 Primed Gray
#2 R&R, #2 Perfections
1/2-3/4 Medium Handsplits, 3/4-5/4 Heavy Handsplits
26
27
CONVERSION CHART
USING
THE
TABLE
USING
THE
TABLE
Explanation
Table
Headings
Explanation
ofof
Table
Headings
Green Surfaced
Dry Surfaced
Dry Surfaced
Lineal Feet
Lineal Feet Green Surfaced
Board Feet
Lineal Feet
Lineal Feet
Board Feet
Size for more
Size for 19%
NOMINAL
Size
for
more
Size
for 19%
per 1000
per Board
per Lineal
NOMINAL
per 1000
per Board
per Lineal
than 19%
or less
SIZE
than 19%
or less
Board Feet
Foot
Foot
SIZE
Board Feet
Foot
Foot
moist. content
moisture content
moist. content
moisture content
11
22
33
44
55
BOARD FEET
BOARD FEET
(rounded to the nearest 100th)
LENGTHS
LENGTHS
6'
8'
10'
12'
14'
16'
6'
8'
10'
12'
14'
16'
66
77
LINEAR
FEET
PER
1000
BOARD
FEET:lineal
lineal
feet,
given
size
pieces,
needed
equal
1000
board
feet.
1-1LINEAR
FEET
PER
1000
BOARD
FEET:
feet,
inin
given
size
pieces,
needed
toto
equal
1000
board
feet.
LINEAL
FEET
PER
BOARD
FEET:the
the
lineal
feet,
given
size
pieces,
needed
equal
one
board
foot.
2-2LINEAL
FEET
PER
BOARD
FEET:
lineal
feet,
inin
given
size
pieces,
needed
toto
equal
one
board
foot.
DDIIMMEENNSSIIOONN LLUUMMBBEERR
This
table,
based
Standard
Nominal
Sizes
from
(1x2
8x24)
has
been
developed
Western
Wood
Products
This
table,
based
onon
Standard
Nominal
Sizes
from
(1x2
toto
8x24)
has
been
developed
byby
Western
Wood
Products
Association
as
an
aid
to:
(a)
determine
lineal
(linear)
feet
per
1000
board
feet
and
(b)
find
the
equivalents
Association as an aid to: (a) determine lineal (linear) feet per 1000 board feet and (b) find the equivalents
between
lineal
and
board
feet.
The
common
lengths
between
and
are
tabulated
the
table;
a formula
between
lineal
and
board
feet.
The
common
lengths
between
6' 6'
and
16'16'
are
tabulated
inin
the
table;
a formula
is
provided
for
calculating
other
lengths.
The
table
can
be
used
when
dollar
amounts
are
added,
as
the
basis
is provided for calculating other lengths. The table can be used when dollar amounts are added, as the
basis
of
converting:
(a)
cost
per
1000
board
feet
to
cost
per
lineal
foot,
or
(b)
cost
per
piece.
Refer
to
the
rest
of
the
of converting: (a) cost per 1000 board feet to cost per lineal foot, or (b) cost per piece. Refer to the rest of the
additional
information
and
examples
of
how
to
use
the
table
to
solve
problems.
Actual
dressed
(surfaced),
additional information and examples of how to use the table to solve problems. Actual dressed (surfaced),
green
and
dry
sizes
are
included
reference;
however,
nominal
sizes
are
always
used
for
board
footage
green
and
dry
sizes
are
included
forfor
reference;
however,
nominal
sizes
are
always
used
for
board
footage
calculations.
When
using
this
table
start
with
the
NOMINAL
SIZES
column.
Read
to
the
left
for
lineal
foot
calculations. When using this table start with the NOMINAL SIZES column. Read to the left for lineal foot
information.
Read
to
the
right
for
board
foot
information.
For
lengths,
other
than
those
tabulated,
the
formula
information. Read to the right for board foot information. For lengths, other than those tabulated, the formula
for
converting
lineal
feet
to
board
feet
is:
xW
L=
BOARD
FEET
for converting lineal feet to board feet is: T T
xW
x Lx =
BOARD
FEET
1212
BBOOAARRDDSS
CONVERSIONS
FROM
LINEAL
FEET
TO
BOARD
FEET
STANDARD
SIZES
OF
WESTERN
LUMBER.
CONVERSIONS
FROM
LINEAL
FEET
TO
BOARD
FEET
ININ
STANDARD
SIZES
OF
WESTERN
LUMBER.
Board
Measure
Equivalents:
Board
Measure
Equivalents:
GREEN
SURFACED
SIZE
FOR
MORE
THAN
19%
MOISTURE
CONTENT:this
this
the
actual
(surfaced)
size
3-3GREEN
SURFACED
SIZE
FOR
MORE
THAN
19%
MOISTURE
CONTENT:
is is
the
actual
(surfaced)
size
of
unseasoned
lumber
which,
by
definition,
has
a
moisture
content
in
excess
of
19%.
of unseasoned lumber which, by definition, has a moisture content in excess of 19%.
DRY
SURFACED
SIZE
FOR
19%
OR
LESS
MOISTURE
CONTENT:this
this
the
actual
(surfaces)
size
5-5DRY
SURFACED
SIZE
FOR
19%
OR
LESS
MOISTURE
CONTENT:
is is
the
actual
(surfaces)
size
ofof
airair
oror
kiln-dried,
seasoned
lumber
which,
by
definition,
has
a
moisture
content
of
19%
or
less.
kiln-dried, seasoned lumber which, by definition, has a moisture content of 19% or less.
BOARD
FEET
PER
LINEAL
FOOT:
the
number
board
feet
per
one
foot
length,
a given
size.
6-6BOARD
FEET
PER
LINEAL
FOOT:
the
number
ofof
board
feet
per
one
foot
ofof
length,
inin
a given
size.
BOARD
FEET:the
the
columns
this
section
give
board
footages
corresponding
lengths
and
sizes.
7-7BOARD
FEET:
columns
inin
this
section
give
board
footages
forfor
corresponding
lengths
and
sizes.
Lengths
are
given
from
6'
to
16';
in
2'
increments.
Sizes
are
read
from
the
NOMINAL
SIZES
column
the
Lengths are given from 6' to 16'; in 2' increments. Sizes are read from the NOMINAL SIZES column inin
the
middle
of
the
table.
middle of the table.
28
HHEEAAVVYY TTIIMMBBEERRSS
NOMINAL
SIZE:
the
standard
size
designation
lumber,
used
convenience.
4-4NOMINAL
SIZE:
is is
the
standard
size
designation
forfor
lumber,
used
forfor
convenience.
Green Surfaced
Dry Surfaced
Dry Surfaced
Lineal Feet Lineal FeetGreen Surfaced
Board Feet
Lineal Feet Lineal Feet
Size for more NOMINAL
Size for 19% Board Feet
Size
for
more
Size
for 19%
per 1000
per Board
per Lineal
NOMINAL
per 1000
per Board
per Lineal
than 19%
or less
SIZE
than 19%
or less
Board Feet
Foot
Foot
Board Feet
Foot
moist. content SIZE
moisture content Foot
moist. content
moisture content
6.0000'
1x2
3/4 x 1 1/2"
0.1667
6000'
6.0000'
1x2
3/4 x 1 1/2"
0.1667
6000'
4.0000
1x3
3/4 x 2 1/2
0.2500
4000
4.0000
1x3
3/4 x 2 1/2
0.2500
4000
3.0000
1x4
3/4 x 3 1/2
0.3333
3000
3.0000
1x4
3/4 x 3 1/2
0.3333
3000
Surfaced
2.0000
1x6
3/4 x 5 1/2
0.5000
2000
Surfaced
2.0000
1
x
6
3/4
x
5
1/2
0.5000
2000
Dry
1.5000
1x8
3/4 x 7 1/4
0.6667
1500
Dry
1.5000
1x8
3/4 x 7 1/4
0.6667
1500
Only
1.2000
1 x 10
3/4 x 9 1/4
0.8333
1200
Only
1.2000
1 x 10
3/4 x 9 1/4
0.8333
1200
1.0000
1 x 12
3/4 x 11 1/4
1.0000
1000
1.0000
1 x 12
3/4 x 11 1/4
1.0000
1000
0.8571
1 x 14
3/4 x 13 1/4
1.1667
857
0.8571
1 x 14
3/4 x 13 1/4
1.1667
857
BOARD FEET
BOARD FEET
LENGTHS
LENGTHS
6'
8'
10'
12'
14'
16'
6'
8'
10'
12'
14'
16'
2.33
1
2
2.67
1.33
1.67
2.33
1
2
2.67
1.33
1.67
3.50
1.50
3
4
2
2.50
3.50
1.50
3
4
2
2.50
4.67
2
5.33
4
2.67
3.33
4.67
2
5.33
4
2.67
3.33
7
3
6
8
4
5
7
3
6
8
4
5
9.33
4
10.67
8
5.33
6.67
9.33
4
10.67
8
5.33
6.67
11.67 13.33
5
10
6.67
8.33
11.67 13.33
5
10
6.67
8.33
14
6
12
16
8
10
14
6
12
16
8
10
16.33 18.67
7
14
9.33
11.67
16.33
7
14
18.67
9.33
11.67
3000
3000
2000
2000
1500
1500
1000
1000
750
750
600
600
500
500
429
429
3.0000
3.0000
2.0000
2.0000
1.5000
1.5000
1.0000
1.0000
0.7500
0.7500
0.6000
0.6000
0.5000
0.5000
0.4288
0.4288
1 9/16 x 1 9/10
1 9/16 x 1 9/10
1 9/16 x 2 9/10
1 9/16 x 2 9/10
1 9/16 x 3 9/10
1 9/16 x 3 9/10
1 9/16 x 5 9/8
1 9/16 x 5 9/8
1 9/16 x 7 1/2
1 9/16 x 7 1/2
1 9/16 x 9 1/2
1 9/16 x 9 1/2
1 9/16 x 11 1/2
1 9/16 x 11 1/2
1 9/16 x 13 1/2
1 9/16 x 13 1/2
2x2
2x2
2x3
2x3
2x4
2x4
2x6
2x6
2x8
2x8
2 x 10
2 x 10
2 x 12
2 x 12
2 x 14
2 x 14
1 1/2 x 1 1/2
1 1/2 x 1 1/2
1 1/2 x 2 1/2
1 1/2 x 2 1/2
1 1/2 x 3 1/2
1 1/2 x 3 1/2
1 1/2 x 5 1/2
1 1/2 x 5 1/2
1 1/2 x 7 1/4
1 1/2 x 7 1/4
1 1/2 x 9 1/4
1 1/2 x 9 1/4
1 1/2 x 11 1/4
1 1/2 x 11 1/4
1 1/2 x 13 1/4
1 1/2 x 13 1/4
0.3333
0.3333
0.5000
0.5000
0.6667
0.6667
1.0000
1.0000
1.3333
1.3333
1.6667
1.6667
2.0000
2.0000
2.3333
2.3333
2
2
3
3
4
4
6
6
8
8
10
10
12
12
14
14
2.67
2.67
4
4
5.33
5.33
8
8
10.67
10.67
13.33
13.33
16
16
18.67
18.67
3.33
3.33
5
5
6.67
6.67
10
10
13.33
13.33
16.67
16.67
20
20
23.33
23.33
4
4
6
6
8
8
12
12
16
16
20
20
24
24
28
28
5.33
4.67
5.33
4.67
7
8
8
7
9.33
10.67
10.67
9.33
16
14
16
14
18.67 21.33
18.67 21.33
26.67
23.3
26.67
23.3
32
28
32
28
32.67 37.33
32.67 37.33
1333
1333
1000
1000
667
667
500
500
400
400
333
333
286
286
250
250
1.3333
1.3333
1.0000
1.0000
0.6667
0.6667
0.5000
0.5000
0.4000
0.4000
0.3333
0.3333
0.2857
0.2857
0.2500
0.2500
2 9/16 x 2 9/10
2 9/16 x 2 9/10
2 9/16 x 3 11/16
2 9/16 x 3 11/16
2 9/16 x 5 9/8
2 9/16 x 5 9/8
2 9/16 x 7 1/2
2 9/16 x 7 1/2
2 9/16 x 9 1/2
2 9/16 x 9 1/2
2 9/16 x 11 1/2
2 9/16 x 11 1/2
2 9/16 x 13 1/2
2 9/16 x 13 1/2
2 9/16 x 15 1/2
2 9/16 x 15 1/2
3x3
3x3
3x4
3x4
3x6
3x6
3x8
3x8
3 x 10
3 x 10
3 x 12
3 x 12
3 x 14
3 x 14
3 x 16
3 x 16
2 1/2 x 2 1/2
2 1/2 x 2 1/2
2 1/2 x 3 1/2
2 1/2 x 3 1/2
2 1/2 x 5 1/2
2 1/2 x 5 1/2
2 1/2 x 7 1/2
2 1/2 x 7 1/2
2 1/2 x 9 1/4
2 1/2 x 9 1/4
2 1/2 x 11 1/4
2 1/2 x 11 1/4
2 1/2 x 13 1/4
2 1/2 x 13 1/4
2 1/2 x 15 1/4
2 1/2 x 15 1/4
0.7500
0.7500
1.0000
1.0000
1.5000
1.5000
2.0000
2.0000
2.5000
2.5000
3.0000
3.0000
3.5000
3.5000
4.0000
4.0000
4.50
4.50
6
6
9
9
12
12
15
15
18
18
21
21
24
24
6
6
8
8
12
12
18
18
20
20
24
24
28
28
32
32
7.50
7.50
10
10
15
15
20
20
25
25
30
30
35
35
40
40
9
9
12
12
18
18
24
24
30
30
36
36
42
42
48
48
10.50
10.50
14
14
21
21
28
28
35
35
42
42
49
49
58
58
12
12
16
16
24
24
32
32
40
40
48
48
56
56
64
64
750
750
500
500
375
375
300
300
250
250
214
214
188
188
0.7500
0.7500
0.5000
0.5000
0.3750
0.3750
0.3000
0.3000
0.2500
0.2500
0.2143
0.2143
0.1875
0.1875
3 9/10 x 3 9/10
3 9/10 x 3 9/10
3 9/10 x 5 5/8
3 9/10 x 5 5/8
3 9/18 x 7 1/2
3 9/18 x 7 1/2
3 9/15 x 9 1/2
3 9/15 x 9 1/2
3 9/15 x 11 1/2
3 9/15 x 11 1/2
3 9/18 x 13 1/2
3 9/18 x 13 1/2
3 9/15 x 15 1/2
3 9/15 x 15 1/2
4x4
4x4
4x6
4x6
4x8
4x8
4 x 10
4 x 10
4 x 12
4 x 12
4 x 14
4 x 14
4 x 16
4 x 16
Surfaced
Surfaced
Green
Green
Only
Only
1.3333
1.3333
2.0000
2.0000
2.6667
2.6667
3.3333
3.3333
4.0000
4.0000
4.6667
4.6667
5.3333
5.3333
8
8
12
12
16
16
20
20
24
24
28
28
32
32
10.67 13.33
10.67 13.33
16 2020
16
21.33 26.67
21.33 26.67
33.33
26.67 33.33
26.67
32 4040
32
37.33 46.67
37.33 46.67
42.67 53.33
42.67 53.33
16
16
24
24
32
32
40
40
48
48
56
56
64
64
18.67
18.67
28
28
37.33
37.33
46.67
46.67
56
56
65.33
65.33
74.67
74.67
21.33
21.33
32
32
42.67
42.67
53.33
53.33
64
64
74.67
74.67
85.33
85.33
333
333
250
250
200
200
167
167
143
143
125
125
111
111
100
100
0.3333
0.3333
0.2500
0.2500
0.2000
0.2000
0.1667
0.1667
0.1429
0.1429
0.1250
0.1250
0.1111
0.1111
0.1000
0.1000
5 1/2 x 5 1/2
5 1/2 x 5 1/2
5 1/2 x 7 1/2
5 1/2 x 7 1/2
5 1/2 x 9 1/2
5 1/2 x 9 1/2
5 1/2 x 11 1/2
5 1/2 x 11 1/2
5 1/2 x 13 1/2
5 1/2 x 13 1/2
5 1/2 x 15 1/2
5 1/2 x 15 1/2
5 1/2 x 17 1/2
5 1/2 x 17 1/2
5 1/2 x 19 1/2
5 1/2 x 19 1/2
6x6
6x6
6x8
6x8
6 x 10
6 x 10
6 x 12
6 x 12
6 x 14
6 x 14
6 x 16
6 x 16
6 x 18
6 x 18
6 x 20
6 x 20
Surfaced
Surfaced
Green
Green
Only
Only
3.0000
3.0000
4.0000
4.0000
5.0000
5.0000
6.0000
6.0000
7.0000
7.0000
8.0000
8.0000
9.0000
9.0000
10.0000
10.0000
18
18
24
24
30
30
36
36
42
42
48
48
54
54
60
60
42
42
56
56
70
70
84
84
98
98
112
112
126
126
140
140
48
48
64
64
80
80
96
96
112
112
128
128
144
144
160
160
188
188
150
150
125
125
107
107
94
94
83
83
75
75
68
68
63
63
0.1875
0.1875
0.1500
0.1500
0.1250
0.1250
0.1071
0.1071
0.0938
0.0938
0.0833
0.0833
0.0750
0.0750
0.0682
0.0682
0.0625
0.0625
7 1/2 x 7 1/2
7 1/2 x 7 1/2
7 1/2 x 9 1/2
7 1/2 x 9 1/2
7 1/2 x 11 1/2
7 1/2 x 11 1/2
7 1/2 x 13 1/2
7 1/2 x 13 1/2
7 1/2 x 15 1/2
7 1/2 x 15 1/2
7 1/2 x 17 1/2
7 1/2 x 17 1/2
7 1/2 x 19 1/2
7 1/2 x 19 1/2
7 1/2 x 21 1/2
7 1/2 x 21 1/2
7 1/2 x 23 1/2
7 1/2 x 23 1/2
8x8
8x8
8 x 10
8 x 10
8 x 12
8 x 12
8 x 14
8 x 14
8 x 16
8 x 16
8 x 18
8 x 18
8 x 20
8 x 20
8 x 22
8 x 22
8 x 24
8 x 24
Surfaced
Surfaced
Green
Green
Only
Only
5.3333
5.3333
6.6667
6.6667
8.0000
8.0000
9.3333
9.3333
10.6667
10.6667
12.0000
12.0000
13.3333
13.3333
14.6667
14.6667
16.0000
16.0000
32
32
40
40
48
48
58
58
64
64
72
72
80
80
88
88
96
96
24
24
32
32
40
40
48
48
56
56
64
64
72
72
80
80
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
36
36
48
48
60
60
72
72
84
84
96
96
108
108
120
120
42.67 53.33
64
42.67 53.33
64
53.33 66.67
80
53.33 66.67
80
80
64
96
80
64
96
74.67 93.33
112
74.67 93.33
112
85.33 106.67 128
85.33 106.67 128
130
96
144
130
96
144
106.67 133.33 180
106.67 133.33 180
117.33 146.67 176
117.33 146.67 176
160
128
192
160
128
192
BBOOAARRDD FFEEEETT
CONVERSION CHART
74.67 85.33
74.67 85.33
99.33 106.67
99.33 106.67
128
112
128
112
130.67 149.33
130.67 149.33
149.33 170.67
149.33 170.67
192
168
192
168
186.67 213.33
186.67 213.33
205.33 234.37
205.33 234.37
256
224
256
224
29
Milton, VT
Ayer, MA
Manchester, CT
Louisville, KY
High Point, NC
Raleigh, NC
Greenville, SC
Nashville, TN
Memphis, TN
Tucson, AZ
Hattiesburg, MS
(Corporate Offices)
Mobile, AL
Jacksonville, FL
Orlando, FL
Miami, FL
1925 Perimeter Road
Greenville, SC 29615
864-277-8865
[email protected]
• High Point, North Carolina
5037 Prospect Street
High Point, NC 27263
336-472-1677
[email protected]
• Jacksonville, Florida
3160 W. 45th St
Jacksonville, FL 32209
904-783-0170
[email protected]
• Louisville, KY
10501 Bunsen Way
Louisville, KY 40299
502-297-8321
[email protected]
• Memphis, Tennessee
4060 Pilot Drive
Memphis, TN 38118
901-794-1050
[email protected]
• Miami, Florida
• Mobile, Alabama
P.O. Box 5237
1691 O’Donaghue Street
Mobile, AL 36615
251-432-2322
[email protected]
• Nashville, Tennessee
126 International Boulevard
PO Box 367
LaVergne, TN 37086
615-793-7746
[email protected]
• Orlando, Florida
7806 Apopka Boulevard
Orlando, FL 32703
407-299-4280
[email protected]
• Raleigh, North Carolina
4725 Auburn-Knightdale Road
Raleigh, NC 27610
919-772-7550
[email protected]
• Tucson, Arizona
501 South Toole Avenue
Tucson, AZ 85701
520-792-9966
[email protected]
91 Fitchburg Rd
Ayer, MA 01432
800-752-0129
[email protected]
• Manchester, Connecticut
401 New State Road
Manchester, CT 06040
800-468-8220
[email protected]
• Milton, Vermont
67 Catamount Drive
Milton, VT 05468
800-955-2677
[email protected]
Hattiesburg, Mississippi
Corporate Headquarters
15 Professional Parkway
Hattiesburg, MS 39402
601-296-4826
[email protected]
s The
r th G o
ee
oe
• Ayer, Massachusetts
Ea
n, I t D
1860 Dr. Andre’s Way
Delray Beach, FL 33445
561-276-5155
[email protected]
od
• Greenville, South Carolina
For more information, please visit
the “Green” tab on our website.
! * Gr

McQuesten Group - Hood Distribution

Transcription

Similar documents

TATA Mangaris

SCarowinds Corporate Affiliate Flyer

93¢ 48¢ - Hamshaw Lumber

ohio state day

Cedar Lake Speedway

Cedar Park_Press release 05_14

The construction of gender through Man Ray`s Le Violon d`Ingres

Village at Cedar Park

Pre-excitation syndromes and Conduction Blocks