Root-Cause Troubleshooting for Your Entire Network

TotalView Network Features
Root-Cause Troubleshooting
for Your Entire Network
Today, you are asked to support more devices than ever before. Your network
infrastructure encompasses VoIP, video, VDI, and data and operates across many
locations, some managed by you and some not. Complexity is on the rise and
TotalView is uniquely designed to deal with it —making complex heterogeneous
networks easy to understand and troubleshoot. No other solution provides the
automated expertise, analysis, and coverage of every interface on every device on
a network of any size across any number of locations. PathSolutions TotalView
solves all your network performance problems, delivering a high performing
network at the lowest possible cost.
• Broad: Covers all ports
on all routers & switches
• Continuous: Health
collected every 5 minutes
• Deep: 18 different
error counters collected
and analyzed
• Intelligent: Identifies
and diagnoses the
root-cause of network
problems in Plain-English
• Flexible: Fully-
integrated port-mapper,
PoE monitoring, VoIP
troubleshooting, and more
Complete End-to-End Monitoring for All Network Interfaces
TotalView monitors more error counters than any other solution. As a result, it is
more intelligent than other solutions, detecting many problems that other solutions
miss, including:
• Over-utilized interfaces.
• Broadcast storms.
• Incorrect speed settings.
• Duplex mismatches.
• Packet loss from cabling faults.
Total Network Visibility
Contact PathSolutions
for more information
www.PathSolutions.com
[email protected]
(877) 748-1777
®
TotalView Network Features
Advanced Reporting: Network Errors,
Performance, and Administration
Based on utilization rates you set, continually monitor the
interfaces that are experiencing a higher utilization rate, including
error rates and peak daily utilization. Top ten reports include
the top ten interfaces with the most errors, top ten interfaces
with the highest daily percentage transmission, and the top ten
interfaces with the highest daily received percentage.
PoE Monitoring to Manage Power Usage
of PoE Switches
Monitor the power usage of your PoE switches to make sure
you are not getting close to limitations of the switch. This
includes monitoring the power draw for each port on the switch
so you can determine where high-power drawing devices are
connected and quickly determine any power faults.
Fully Integrated Port Mapper Tells You What’s
Connected to Each Interface
Instantly see how your network is connected and determine
if the remote-connected device is behaving correctly. Instead
of manually tracing cables through the network, TotalView’s
fully-integrated port-mapping capability tells you exactly what’s
connected to each interface. Any DNS name can be easily
identified by clicking on the IP address as well as MAC address
manufacturers by hovering over the MAC address.
Fast Auto-Configuration: Easy to Install, Deploy,
and Re-Configure
TotalView can be installed and auto-configured for virtually
any size network within 12 minutes. Instead of spending hours,
days, or weeks deploying and configuring your solution, use
that “returned” time to improve the quality and performance of
your network.
Since most networks change on a regular basis, re-configuring
TotalView to recognize those changes is equally easy. This
significantly reduces the ongoing burden of administrative
configuration. As your network grows or becomes more
complex, TotalView is designed to grow with it.
Add-On Modules
When it comes to troubleshooting the quality of VoIP calls or
working with other reporting systems, PathSolutions add-on
modules make it easy.
Monitoring and Managing VoIP Networks
TotalView for VoIP delivers Total VoIP Visibility™. It continuously
monitors the performance of your entire VoIP network, tells
you when, where, and why VoIP problems occur, and even
recommends how to fix them – in plain-English.
With TotalView, call troubleshooting has never been easier as
all corners of your network and beyond are covered, enabling
you to isolate problems even when they occur on your carrier’s
network or other third party networks. VoIP features include:
• Unlimited license call simulator.
• Call path mapper that shows how calls traverse the
network and all the links, switches, and routers used.
• Phone locator that quickly identifies where a phone
is connected to the network.
Easy Exports of Your Network Data
If you need to create custom reports or work with other
reporting systems, TotalView’s Enterprise module allows you
to easily export your network data. In addition, its system-wide
interface search tool allows you to search for interface alias
information like customer numbers or circuit ID numbers.
Auto-Diagnosis, Problem Identification, and Resolution
As TotalView automatically monitors all your switches
and routers and identifies potential issues, its Network
Prescription Engine diagnoses the problem and recommends
a fix in plain-English.
Total Network Visibility
®
R4.3
©2013 PathSolutions, Inc.