Catalog

Transcription

Catalog

THE MAKING OF
AN ICON
If you could build a new line of high-end
metalworking machinery, how would you do it?
Where would you start?
A line of machinery so refined, it helps to redefine
the standard by which machines are judged?
How do you go about building an Icon?
JET’s engineering team started from the ground
up and meticulously went part by part through
metalworking lathes, mills, and saws and pushed
the status quo. With updated features and finetuned internal mechanisms, JET sweated every
detail of the manufacturing process.
The result is increased precision needed to hit
stricter tolerance guidelines demanded in today’s
custom manufacturing settings; durability built into
every work surface to do demanding jobs time and
time again, and a robust commitment to safety
that starts with CSA / UL approved electrics, and
continues throughout every part of every machine.
Each of these machines puts a stake in the ground,
signaling to the rest of the market that there’s
a new standard of excellence, a new Icon
in manual machinery.
That icon is JET Elite.
2
LIVING UP TO THE
STRICTEST EXPECTATIONS
PRECISION IS KEY
Precision is needed to hit stricter tolerance guidelines
demanded in today’s custom manufacturing settings.
Elite Machinery matches or exceeds the highest quality
standards and is made to be used in high-end tool
and die shops, aerospace and medical instrument
manufacturing facilities, and other industries that create
precisely manufactured parts.
DURABILITY COMES STANDARD
Durability is the framework of our machines, which will last
long into the future. All of our lathes, mills and saws have
been made with the highest standards to last for many
generations of machinists.
SAFETY IS A MUST
Machine safety plays a highly important role in the overall
welfare of machinist, and the shop environment. From safety
guards, e-stops, electronic spindle brakes and CSA/UL
electrics, Elite machines make safety the highest priority.
4
WORLD CLASS
LATHES
What does it mean to be world class?
It means total package engineering; precision, durability
and safety that far exceed market standards. Machines
with spindle runouts so low it can’t be recorded by most
measurement devices; hardening and grinding each gear.
Wider bedways hardened to 70 HRC, Class 7 Spindle
bearings, and Turcite-B coatings to ensure parallelism to
within 0.0008”.CSA/UL electrics in every lathe with
enclosed fully lit splash guards.
It’s the ability to identify the evolving needs of a
demanding environment and design machines that
surpass those needs.That’s world class.
That’s Elite.
LATHE CONTENT
Spindle Assembly....................................8-9
Elite Headstock........................................10-11
Elite Bed, Carriage & Equipment..............12-13
Lathe Assembly.......................................14-17
Clutch Lathes...........................................18-21
Geared Head Lathes................................22-25
EVS Lathes..............................................26-29
Turning Packages....................................30-31
Turning Accessories.................................32-35
6
SPINDLE ASSEMBLY
BUILT FOR PRECISION
PRECISION SPINDLE
High precision spindle is machined from forged alloy steel, ground to exact
measurements, and dynamically balanced to provide vibration free operation.
CLASS 7 SPINDLE BEARINGS
Three high precision bearings firmly support the spindle, keeping
spindle runout, with gears engaged to a maximum of 0.0004”
S P IND LE NO SE
RU NOUT
0.0004”
8
SPIN DLE CEN TER
RUN OUT
0.0006”
ELITE Headstock
BUILT FOR DURABILITY
Totally Enclosed Headstock
Totally enclosed headstock, gearbox and apron have an inner oil
reservoir that continuously lubricates moving parts, reducing friction.
Heat treated and Ground Gears
Heat treated and precision ground gears in the headstock reduce
vibration and deflection.
Universal Gearbox
Seamlessly go back and forth, between four different pitch
threads without changing gears. The universal gearbox
supports inch, metric, modular, and diametral threads.
10
ELITE BeD, Carriage
and Equipment
Hardened and ground bed
Bedways are heavy duty and hardened to 70 HRC with
Turcite coatings.
Carriage and Slide
Anti-Float design backlash eliminator fitted in the cross slide
nut, with one shot lubrication in the top slide and carriage.
enclosed splash guard
Fully lit with CNC-style lighting the enclosed full-length
splash guard is expertly designed to contain all chips
and coolant.
Straightness of Bed:
Longitudinal & Transverse
Parallelism of Bed Slideways
OVER FORTY INCHES
OVER FORTY INCHES
0.0016"
12
0.0008"
Difference in Height
headstock and tailstock
0.0008"
OVER FORTY INCHES
LATHE ASSEMBLY
BUILT FOR SAFETY
CNC Style Lighting
Splash guard mounted, energy efficient, low temperature,
CNC style lighting provides a well-lit work area.
Chuck guard
All metal chuck guard features a sight window, and deflects
chips and coolant from the operator or the assigned work area.
Foot brake
Full-length foot brake brings the spindle to a complete
stop at any RPM.
CSA/UL APPROVED Electrics
For added safety, the motor and electrics of ELITE lathes follow strict
guidelines and electrical requirements to be certified by CSA Group.
162920
14
LATHE ASSEMBLY
Jog Alignment
Jog button rotates the spindle incrementally, which
allows the gears to easily engage.
Certified Meehanite® Castings
With rock solid one-piece construction, certified Meehanite castings have
long been a symbol of reliability and durability. We build every ELITE lathe
with Meehanite castings to ensure they maintain their strict tolerances for
years to come.
Ball bearing steady rests
Steady rest features double sealed, ball bearing guides for smooth
material movement.
Easy to Read Charts
Elite lathes feature reference charts that have been designed in the USA
with machinist feedback and feature large, easy to read fonts to ensure a
great user experience.
16
18
CLUTCH
LATHES
WHEN PRECISION
MATTERS THE MOST
Clutch-style geared head lathes are signature machines
within the Elite lathe lineup. Engineered to meet world-class
tolerances for spindle runout, longitudinal and transverse
bed alignment, and bed-way parallelism. Take Elite
performance to a whole new level.
18” & 21”
Clutch latheS
FEATURES
•Fully lit with CNC-style lighting, the enclosed full length
splash guard is expertly designed to contain all chips and
coolant.
•Class 7 precision taper roller bearings keep spindle run
out to a maximum of 0.0004”
•Hardened and ground gears in headstock reduce
vibration and deflection
•Wider bedway absorbs vibration
•Turcite-B coating between bed and carriage provides
friction free motion in all linear directions
•One-Shot lubrication in carriage reduces maintenance
•Overload clutch at feed shaft prevents the carriage from
crashing into the chuck
•Shear pin in the lead screw disengages the feed when
overloaded, preventing damage to the apron and
headstock
•Hardened and ground bedways provide accurate
longitudinal movements
•Front facing chip pan allows easy chip removal from the
front of the machine
•Certified Meehanite castings retain their tolerances and
remain rigid through many years of machining
•Following strict guidelines, CSA/UL electrics have been
added for increased safety
STANDARD EQUIPMENT
•12” 3-Jaw chuck
•Backplate for 12” Chuck
•Steady rest- ball bearing
•Follow rest
•4-Way tool post
•4-Position carriage stop
•Chuck guard
•Micro-Carriage bed stop
•Threading dial
PRECISION TURNING
THAT ONLY ELITE
C A N
20
O F F E R
3-1/8" spindle bore
Matrix® Disc clutch permits the
changing of gears without
stopping the motor, reducing
wear
Universal gearbox supports
inch, metric, modular, and
diametral threads, without
changing gears
Stock Number
892200
892250
892270
Model Number
EGH-1880
EGH-2180
EGH-21120
Swing Over Bed (In.)
18
21
21
Swing Over Cross Slide (In.)
11
14
14
Swing Through Gap (In.)
Length of Gap (In.)
Distance Between Centers (In.)
Spindle Bore (In.)
31-1/9
31-1/9
9-5/6
9-5/6
80
80
120
3-1/8
3-1/8
3-1/8
Spindle Mount
D1-8
D1-8
D1-8
Spindle Taper with Sleeve
MT-7
MT-7
MT-7
Number of Spindle Speeds
Range of Spindle Speeds (RPM)
16
16
16
20-1600
20-1600
20 - 1600
Range of Longitudinal Feeds (IPR)
0.0015 - 0.04
0.0015 - 0.04
0.0015 - 0.04
Range of Cross Feeds (IPR)
0.00075 - 0.02
0.00075 - 0.02
0.00075 - 0.02
Number of Inch Threads
38
38
38
Range of Inch Threads (TPI)
2 - 72
2-72
2-72
Number of Metric Threads
40
40
40
0.4 - 14
0.4-14
0.4 - 14
21
21
21
8 - 44
8 - 44
8 - 44
Range of Metric Threads
Number of Diametrial Pitch Threads
Range of Diametrial Pitch Threads
Number of Modular Pitch Threads
Range of Modular Pitch Threads
18
18
18
0.3 - 3.5
0.3 - 3.5
0.3 - 3.5
Max Tool Size (In.)
1x1
1x1
1x1
Compound Slide Travel (In.)
5-2/5
5-2/5
5-2/5
Cross Slide Travel (In.)
10-2/3
10-2/3
10-2/3
Tailstock Spindle Travel (In.)
6-1/2
6-1/2
6-1/2
Taper in Tailstock Spindle
MT-5
MT-5
MT-5
Follow Rest Capacity (In.)
3/8 - 7-3/4
3/8 - 7-3/4
1/2 - 3-1/2
Steady Rest Capacity (In.)
1/2 - 3-1/2
1/2 - 3-1/2
3/8 - 7-3/4
Width of Bed (In.)
13-4/7
13-4/7
13-4/7
10 HP, 230/460,
3 Ph Prewired 230V
CSA/ULCertified
12-1/2 HP, 230/460V,
3Ph Prewired 230V
CSA/UL Certified
12-1/2 HP,230/460V,
3Ph Prewired 230V
CSA/UL Certified
Coolant Pump Motor
1/8 HP
1/8 HP
1/8 HP
Weight (Lbs.)
5,842
6,613
8,157
139 x 44 x 68
139 x 44 x 68
182 x 44 x 68
Motor (HP)
Overall Dimensions (L x W x H) (In.)
Anti-float design eliminates
backlash in the cross slide
28
9-5/6
Steady rest featureS double
sealed, ball bearing guides for
smooth material movement.
22
GEARED
HEAD
LATHES
Dependable, reliable
quality.
Combining the durability and strength of Meehanite®
castings with precision engineering, Elite Geared Head
Lathes turn out high quality components turn after turn.
Designed with a universal gearbox to allow for a wide range
of threading without gear changes, and Turcite-B coatings
between the bed and carriage to provide smooth and
accurate movement, these machines provide the perfect
blend of performance and reliability you can come to expect
from JET Elite.
17"
Geared Head latheS
FEATURES
•Fully lit with CNC-style lighting, the enclosed full
length splash guard is expertly designed to contain
all chips and coolant.
•Class 7 precision taper roller bearings keep spindle
run out to a maximum of 0.0004”
•Hardened and ground gears in headstock reduce
vibration and deflection
•Wider bedway absorbs vibration
•Turcite-B coating between bed and carriage
provides friction free motion in all linear directions
•Anti-float design eliminates backlash in the
cross slide
•One-Shot lubrication in carriage reduces
maintenance
•Overload clutch at feed shaft prevents the carriage
from crashing into the chuck
•Hardened and ground bedways provide accurate
longitudinal movements
•Shear pin in the lead screw disengages the feed
when overloaded, preventing damage to the apron
and headstock
•Certified Meehanite® castings retain their tolerances
and remain rigid through many years of machining
•Following strict guidelines, CSA/UL electrics have
been added for increased safety
STANDARD EQUIPMENT
•10” 3-Jaw chuck
•Backplate for 10” Chuck
•Follow rest
•4-Way tool post
•Chuck guard
•Micro-Carriage bed stop
PRECISION TURNING
THAT ONLY ELITE
C A N
24
O F F E R
3-1/8" spindle bore
Nylon safety gears in the end
train prevent overloading,
increasing user safety
Universal gearbox supports
inch, metric, modular, and
diametral threads, without
changing gears
Stock Number
892500
892550
Model Number
EGH-1740
EGH-1760
17
17
11
11
24-1/2
24-1/2
Length of Gap (In.)
7-2/3
7-2/3
Spindle Bore (In.)
D1-6
D1-6
MT-5
MT-5
12
12
36-1800
36-1800
0.0015 - 0.04
0.0015 - 0.04
0.00075 - 0.02
0.00075 - 0.02
45
45
2 - 72
2-72
39
39
0.2 - 14
0.2 - 14
Number of Diametrial Pitch Threads
Range of Diametrial Pitch Threads
Number of Modular Pitch Threads
21
21
8 - 44
8 - 44
18
18
0.3 - 3.5
0.3 - 3.5
Max Tool Size (In.)
1x1
1x1
6-2/7
6-2/7
9-1/4
9-1/4
Range of Modular Pitch Threads
5
5
MT-4
MT-4
1/2 - 3
1/2 - 3
3/8 - 6-3/4
3/8 - 6-3/4
Width of Bed (In.)
Motor (HP)
Coolant Pump Motor
Weight (Lbs.)
Front facing chip pan allows
easy chip removal from the
60
3-1/8
Spindle Mount
enclosed coolant system
contains excess coolant for
increased safety
40
3-1/8
12
12
7-1/2HP, 230/460V,
3 Ph Prewired 230V
CSA/UL Certified
7-1/2HP, 230/460V,
3 Ph Prewired 230V
CSA/UL Certified
1/8 HP
1/8 HP
3,747
4,078
94 x 44 x 68
114 x 44 x 68
26
EVS
LATHES
Precise.
EVS lathes pack large lathe features into compact
footprints that make them perfect for schools, small shops,
and engineering labs. Featuring an electromagnetic brake,
3-Jaw Chuck, ball bearing-mounted steady & follow rests
and CNC Style Lighting with enclosed splash guard. These
lathes have CSA/UL approved electrics, and truly are Elite!
12”, 13” & 14”
EVS latheS
FEATURES
•1-1/2" - 1 9/16" spindle bore
•Two speed gearbox allows low speeds from 40-365 RPM to
high speeds from 165 - 2000 RPM
•Hardened and ground gears in headstock reduce vibration and
deflection
•Class 7 precision taper roller bearings keep spindle run out to a
maximum of 0.0004”
•Fully lit with CNC-style lighting the enclosed full length splash
guard is expertly designed to contain all chips and coolant.
•Overload clutch at feed shaft prevents the carriage from
crashing into the chuck
•Certified Meehanite® castings retain their tolerances and
remain rigid through many years of machining
•Integrated locking tool cabinet in stand on 12” Lathe
•LED RPM readout allows for precise turning speeds
•Following strict guidelines, CSA/UL electrics have been added
for increased safety
STANDARD EQUIPMENT
•6” 3-jaw chuck
•10” faceplate for 12” Lathes
•12” faceplate for 13” & 14” Lathes
•Follow rest- ball bearing
•4-Way tool post
•Chuck guard
•Micro-carriage bed stop
•Threading dial
•Coolant system
•Center sleeve
•Dead center
•Level pads
•Tool box with tools
PRECISION TURNING
THAT ONLY ELITE
C A N
28
O F F E R
Electromagnetic assisted
foot brake for rapid
braking
Inverter drive system provides
infinitely variable spindle
speeds
Steady rest featureS double
sealed, ball bearing guides for
smooth material movement.
Stock Number
892030
892020
892000
Model Number
E-1440VS
E-1340VS
E-1236VS
14
13
12
8-5/8
7-5/8
7-5/16
20
19
17-1/2
Length of Gap (In.)
9
9
9-1/2
40
40
36
1-1/2
1-1/2
1-9/16
Spindle Bore (In.)
Spindle Mount
D1-4
D1-4
D1-4
MT-5
MT-5
MT-5
Variable
Variable
Variable
30-2200
30-2200
40-2000
40
40
25
0.0012 - 0.0294
0.0012-0.0294
0.0016 - 0.046
Number of Longitudinal Feeds
Number of Cross Feeds
40
25
0.0012 - 0.0294
0.0005 - 0.015
40
40
34
4 - 112
4 - 112
2 - 56
22
22
33
0.45 - 7.5
0.45 - 7.5
0.5 – 12
Max Tool Size (In.)
7/8 x 7/8
5/8 x 5/8
1/2 x 1/2
4
3-1/2
3-1/2
7
6-1/2
6-3/4
4-3/4
4-3/4
4
MT-3
MT-3
MT-3
1/4 - 2-3/8
1/4 - 2-3/8
1/4 - 1-1/8
1/4 - 2-3/4
1/4 - 2-3/4
1/4 - 2-1/2
8-1/2
8-1/2
7-1/2
3HP, 230V,
1Ph CSA/UL
Certified
3HP, 230V,
1Ph CSA/UL
Certified
2HP, 230V,
1Ph CSA/UL
Certified
Coolant Pump Motor
1/8 HP
1/8 HP
1/8 HP
Weight (Lbs.)
1,653
1,433
1,212
77 x 30 x 58
67 x 30 x 57
71 x 30 x 60
Width of Bed (In.)
Motor (HP)
Chuck guards are standard
equipment on all ELITE lathes for
increased safety
40
0.0003 - 0.0294
Front facing chip pan allows
easy chip removal from the
TURNING
PACKAGES
To make your package selection easier we
have created many to choose from. If you do
not see what you need, call or check on line
at www.jettools.com to build your own custom
turning package.
EGH-21120
SIZE
TYPE
PACKAGE DESCRIPTION
21x120
21x80
Clutch
Clutch
STOCK No.
STOCK No.
892630
Taper Attachment
892650
Collet Closer
892651
892631
Taper Attachment And Collet Closer
892652
892632
ACU-RITE 200S DRO
892653
892633
ACU-RITE 200S DRO Taper Attachment
892654
892634
ACU-RITE 200S DRO Collet Closer
892655
892635
ACU-RITE 200S DRO Taper Attachment And Collet Closer
892656
892636
ACU-RITE 300S DRO
892657
892637
892658
892638
892659
892639
892660
892640
Newall DP700 DRO
892661
892641
Newall DP700 DRO Taper Attachment
892662
892642
Newall DP700 DRO Collet Closer
892663
892643
Newall DP700 DRO Taper Attachment And Collet Closer
892664
892645
EGH-1880
EGH-1760
EGH-1740
SIZE
18x18
17x60
17x40
TYPE
Clutch
Geared Head
Geared Head
PACKAGE DESCRIPTION
30
EGH-2180
STOCK No.
STOCK No.
STOCK No.
Taper Attachment
892600
892550
892500
Collet Closer
892601
892551
892501
892602
892552
892502
ACU-RITE 200S DRO
892603
892553
892503
892604
892553
892504
892605
892555
892505
892606
892556
892506
ACU-RITE 300S DRO
892607
892557
892507
892608
892558
892508
892609
892559
892509
892610
892560
892510
Newall DP700 DRO
892611
892561
892511
892612
892562
892512
892613
892563
892513
892614
892564
892514
E-1440
E-1340
EBL-1236
SIZE
14x40
13x40
12x36
TYPE
EVS
EVS
EVS
PACKAGE DESCRIPTION
STOCK No.
STOCK No.
STOCK No.
Taper Attachment
892450
892400
892300
Collet Closer
892451
892401
892301
892452
892402
892302
ACU-RITE 200S DRO
892453
892403
892303
892454
892404
892304
892455
892405
892305
892456
892406
892306
ACU-RITE 200S DRO With CSS
892457
892407
892307
ACU-RITE 200S DRO With CSS Taper Attachment
892458
892408
892308
ACU-RITE 200S DRO With CSS Collet Closer
892459
892409
892309
ACU-RITE 200S DRO With CSS Taper Attachment And Collet Closer
892460
892410
892310
ACU-RITE 300S DRO
892461
892411
892311
892462
892412
892312
892463
892413
892313
892464
892414
892314
ACU-RITE 300S DRO With CSS
892465
892415
892315
ACU-RITE 300S DRO With CSS Taper Attachment
892466
892416
892316
ACU-RITE 300S DRO With CSS Collet Closer
892467
892417
892317
ACU-RITE 300S DRO With CSS Taper Attachment And Collet Closer
892468
892418
892318
Newall DP700 DRO
892469
892419
892319
892470
892420
892320
892471
892421
892321
892472
892422
892322
Newall DP700 DRO With CSS
892473
892423
892323
Newall DP700 DRO With CSS Taper Attachment
892474
892424
892324
Newall DP700 DRO With CSS Collet Closer
892475
892425
892325
Newall DP700 DRO With CSS Taper Attachment And Collet Closer
892476
892426
892326
TURNING
ACCESSORIES
TAPER ATTACHMENT
•Specially designed for each model
•10° inclusive cutting capacity
•Mounts to predrilled and tapped holes
•Factory installation available
STOCK NUMBER
DESCRIPTION
892005
Taper Attachment For Elite 12" EVS Lathes
892035
Taper Attachment For Elite 13" & 14" EVS Lathes
892157
Taper Attachment For Elite 17" Geared Head Lathes
892254
Taper Attachment For Elite 18" & 21" Clutch Lathes
COLLET CLOSER
•Specially designed for each model
•Precision ground components
•Uses 5C collets
•Rear mounted lever action
•Some drilling and other
modification may be required
32
STOCK NUMBER
DESCRIPTION
892006
5C Collet Closer For Elite 12" EVS Lathes
892036
5C Collet Closer For Elite 13" & 14" EVS Lathes
892156
5C Collet Closer For Elite 17" Geared Head Lathes
892253
5C Collet Closer For Elite 18" & 21" Clutch Lathes
ALORIS® SUPER-PRECISION INTRO-PRO SETS
Precision-engineered to ensure repetitive accuracy. Advanced design
provides built-in quick tool changing, versatility with positive rigidity
to meet the most exacting working tolerances. Quickly and easily
installed on any engine, bench or CNC lathe for a wide range of
operations - from fine precision work to heavy-duty cutting.
INTRO-PRO SET
(Includes one each):
•Super Precision Tool Post
•#1 Tool Holder
•#2 Tool Holder
TURNING AND FACING
HOLDER:
made in USA
STOCK NUMBER
DESCRIPTION
892096
Aloris Intro-Pro Set for Elite EGH-18" & 21" Lathes
892095
Aloris Intro-Pro Set for Elite EGH-17" Lathes
892094
Aloris Intro-Pro Set for Elite E-1440VS Lathe
892093
892092
Takes various sizes of bits.
Turning and facing tools can
be locked in together. Saves
time and labor when changing
operations.
BORING, TURNING AND
FACING HOLDER:
"V" groove holds round shank
boring bars and tools as well
as square tool bits.
4-Jaw Chucks For Elite Lathes
•D1 Mount
•4 Independent Jaws
•One piece Jaws
•Cast Iron
STOCK NUMBER
DESCRIPTION
852058
8” 4-Jaw Chuck For Elite EVS Lathes
892158
12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes
892255
14" 4-Jaw Chuck D1-8 For Elite 18" & 21" Clutch Lathes
FaceplateS for For Elite 17”, 18” & 21” Lathes
•Cast Iron
•Rectangular, square and irregular
shape materials can be mounted
STOCK NUMBER
DESCRIPTION
892155
12" Faceplate D1-6 For Elite 17" Geared Head Lathes
892252
14" Faceplate D1-8 For Elite 18" & 21" Clutch Lathes
TURNING
ACCESSORIES
200S ACU-Rite
digital readout
As the industry standard in digital readout systems, the
Acu-Rite 200S offers state-of-the-art features for milling,
turning and grinding applications.
Common Features
•2 or 3 axis 5.7" Transmissive
•4 Function Calculator/Trig
Calculator
•Help Function
•16 Tool Offsets/Diameter
•Preset and zero reset
•Instant Inch/mm conversion
•Position-TracTM Home
LCD display
Reference
Turning Specific Features
•Lock axis feature
•Instant radius/diameter conversion
•Taper Calculator
•CSS (option)
300S ACU-Rite
digital readout
The Acu-Rite 300S is a fully programmable 4 axis
readout system, now available with a full color display.
With the capability to store and create a library of
programs the 300S is everything you need to create, edit
and execute programs on your manual machine tool. Common Features
•2, 3 or 4 axis 5.7" Full Color
Display
•Multiple program names with
numerous steps
•Multiple display views
•Job Clock
34
•Feed Rate Display
•Multiple Language Support
•Absolute/Incremental
•Near-Zero Warning
•Help Function
•16 Tool Offsets/Diameter
•Preset and zero reset
•4 Function Calculator/Trig
Calculator
•Instant Inch/mm conversion
•Position-Trac™ Home
Reference
Turning Specific Features
•Lock axis feature
•Instant radius/diameter conversion
•Taper Calculator
DP700 NEWALL
digital readout
The DP700 is the latest in Newall's line of powerful and
intuitive DROs. The unit is housed in a rugged, ergonomically
designed casting. The DRO features all of the essential
functions for milling, boring, turning, grinding, and general
machining operations.
Common Features
•Clean, Crisp, Easy to Read, LEDs
•Intuitive Message Window
•Long Life Membrane Keypad
•Solid cast construction
•Safe, Low Voltage Power
Supply (UL)
•Panel Mount Version Available
•Bolt Hole Circle Routine
•Line Hole Routine
•Arc Contouring
•Programmable Memory/Teach
•Polar Coordinates
The DP700 is compatible
with Newall’s Spherosyn and
Microsyn encoders which
withstand the harshest shop
conditions.
•Line Hole Calculator
•Tool Offsets
•Taper Calculations
•Axis Vectoring/Summing
•Undo
•Linear and Segmented
Error Comp.
•RS232 Output
•Languages: English, French, German,
Spanish, Italian, Turkish, Czech, Russian,
Portuguese, Danish
A NEW
BREED OF
MILLS
The backbone of everything this country stands for was
made by a man who appreciated fine craftsmanship, almost
as much as he honored the opportunity to make a living
with his hands.
It’s time for this man, and his mill to make a comeback. The
stakes are higher. The margin for error is tighter, and the
game has changed.
Precision can’t just be an ideal. It has to be a fact. A fact that
is so accurate they’ll have to find new ways to measure it.
Balance has to be so dynamic that imbalance is impossible.
Auto-lubrication so consistent that maintenance is
something to marvel at.
These mills have safety features their predecessors could
only imagine, and CSA/UL electrics keep the workplace
safer than ever before.
It’s a next generation takes the best from the old, and
adapts to move forward.
The next generation
of mills is JET Elite.
MILL CONTENT
Spindle Assembly....................................38-39
Elite Table Assembly................................40-41
Variable Speed Assembly........................42-43
Elite Mill Assembly..................................44-45
Elite Mill Assembly..................................46-47
9X49 Variable Speed Mill........................48-49
9X49 Electronic Variable Speed Mill.........50-51
Mill Packages..........................................52-55
Mill Accessories......................................56-59
36
SPINDLE ASSEMBLY
BUILT FOR PRECISION
CLASS 7 SPINDLE BEARINGS
Spindle utilizes class 7210 (P4, ABEL-7) precision angular bearings
for the guaranteed industry-leading spindle taper runout of 0.00012".
PRECISION SPINDLE
Chrome Molybdenum spindle is fully hardened through a carbonizing
treatment and is precisely ground to maintain strict tolerances.
ONE-PIECE QUILL
Seamless, one-piece, steel quill is induction hardened and chromed for
increased strength, and precision ground for greater accuracy.
SPINDLE NOSE
Runout AT 6”
0.0008"
38
SPINDLE NOSE
RUNOUT
0.0004"
SPINDLE TAPER
RUNOUT
0.00012"
TABLE ASSEMBLY
BUILT FOR PRECISION
HAND SCRAPED WAYS
To improve reliability we went back and did it the old fashioned way. X and
Y-axis ways are precisely hand scraped to minimum of 16 points per square
inch and are inspected for a precise fit ensuring greater oil retention and
smooth movement.
LEAD SCREW SUPPORT
Heat treated and polished lead screws are supported by thrust bearings
ensuring smooth, incremental movements of the table under load.
BACKLASH ADJUSTMENT
Table and saddle backlash is controlled by an advanced double nut design
that eliminates end-play for precisely controlled lateral movements.
PERPENDICULARITY OF TABLE
WAY TO SADDLE MOVEMENT
PARALLELISM OF THE TRAVERSE
MOVEMENT OF THE RAM TO
THE TABLE TOP
PARALLELISM OF THE TRAVERSE
MOVEMENT OF THE TABLE TOP
O V E R T W E LV E I N C H E S
O V E R T W E LV E I N C H E S
OVER TWELVE INCHES
0.0004"
40
0.0005"
0.0006"
VARIABLE SPEED ASSEMBLY
PATENTED VARI-DISC KEY
Patented Vari-disc key provides up to ten times the wear
resistance than aluminum or brass keys.
DRIVE SYSTEM
Variable speed pulleys are ground and dynamically balanced,
reducing vibration and ensuring smooth speed transitions.
MOTOR SUPPORT BEARINGS
Ball bearings support of the motor shaft ensures proper loading, support and
alignment for quiet, accurate operation at any speed.
42
MILL ASSEMBLY
PRECISION WORK TABLE
Hardened and ground table provides a stable and accurate
platform for milling a diverse variety of materials.
AUTOMATIC LUBRICATION
Every 30 minutes with a flow of 3-6 cc/cy your
Elite mill is automatically lubicated.
STAINLESS STEEL WAY COVER
Stainless steel Y-Axis way cover prevents damage to the
hand scraped ways.
CERTIFIED MEEHANITE® CASTINGS
Certified Meehanite castings provide the ultimate reassurance that your
ELITE mill will retain its tolerances and the column will remain rigid
through many years of machining.
44
MILL ASSEMBLY
BUILT FOR SAFETY
ELECTRONIC SPINDLE BRAKE
The electronic spindle brake, when activated, interrupts power to the
spindle to prevent accidential start ups.
SPINDLE SAFETY GUARD
The spindle safety guard is easily adjustable and can be repositioned for tool and
work piece change-over providing protection between the cutting tool and operator(s).
MOUNTED CONTROL BOX WITH E-STOP
The mounted control box houses major mill functions as well as an
emergency stop button.
CSA/UL APPROVED ELECTRICS
For added safety, the motor and electrics of ELITE mills follow strict guidelines
and electrical requirements to be certified by CSA Group.
162920
46
9 x 49 ELECTRONIC
VARIABLE SPEED MILL
FEATURES
•Mounted control box houses major mill functions
as well as an emergency stop button for ease
of operation
•A stainless steel Y-Axis way cover prevents
damage and contamination to the precision hand
scraped way
•Head mounted electronic spindle brake engages
with the slightest pressure, interrupting power to
the motor preventing accidental start-ups
•Patented copper alloy Vari-Disc key out performs
standard disc keys providing up to ten times
the wear resistance
•Class 7 spindle bearings have a lower operating
temperature and increase accuracy
•Pre-loaded thrust bearings support the lead
screws reducing backlash and axis movement
providing higher tolerances and increasing
accuracy
•Hardened and ground lead screws for added
durability and increased precision
•Double nut adjustment mechanism virtually
eliminates backlash
•Certified Meehanite® castings retain their
tolerances and remain rigid through many years
of machining
•Automatic lubrication every 30 minutes with a
flow of 3-6cc/cy reduces maintenance
STANDARD EQUIPMENT
•Spindle Safety Guard
•Halogen Machine Lamp
•Dual Locks On All Surfaces
•Toolbox With Tools
•Tolerance Test Sheet
PRECISION MILLING
THAT ONLY ELITE
C A N
48
O F F E R
162920
Industry leading spindle taper
run out 0.00012" ensures
strict tolerances
Inverter drive system with LED
RPM readout provides infinitely
variable spindle speeds
Following strict guidelines
CSA/UL electrics have been
STOCK NUMBER
894050
Table Size (L x W) (In.)
9 x 49 Spindle Taper (In. x TPI)
R-8 Quill Diameter (In.)
3-3/8 Number of Spindle Speeds
Electronic Variable
60 - 5000
0.0015 - 0.003 0.006
Quill Down Feed Rates (IPR)
Spindle Travel (In.)
5 Head Movement (Deg.)
90° R & L 45° F & B Max Distance Spindle to Table (In.)
18-1/4
Distance Spindle to Column (Max.) (In.)
19
Distance Spindle to Column (Min.) (In.)
Collet Capacity
6
1/8 - 7/8
Table Longitudinal Travel (In.)
35
Table Cross Travel (In.)
12 T-Slots Number and Size (In.)
3 and 5/8 T-Slot Centers (In.)
2-1/2 Work Table Weight Capacity (Lbs.)
550
Travel of Knee (In.)
16
Travel of Ram (In.)
13-3/8
3HP, 230V, 3Ph
CSA/UL Certified
Motor (HP)
Weight (Lbs.)
Hand scraped ways for
greater oil retention and
smooth movements
68 x 63 x 84
2,300
ELITE mills feature two
convenient plug-ins for
powered accessories
9 x 49 VARIABLE
SPEED MILL
FEATURES
•Mounted control box houses major mill functions
as well as an emergency stop button for ease
of operation
•Stainless steel Y-Axis way cover prevents
damage and contamination to the precision hand
scraped way
•Head mounted electronic spindle brake engages
with the slightest pressure, interrupting power to
the motor preventing accidental start-ups
•Patented copper alloy Vari-Disc key out performs
standard disc keys providing up to ten times the
wear resistance
•Class 7 spindle bearings have a lower operating
temperature and increase accuracy
•Pre-loaded thrust bearings support the lead screws
reducing backlash and axis movement providing
higher tolerances and increasing accuracy
•Hardened and ground lead screws for added
durability and increased precision
•Double nut adjustment mechanism virtually
eliminates backlash
•Certified Meehanite® castings retain their
tolerances and remain rigid through many
years of machining
•Automatic lubrication every 30 minutes with
a flow of 3-6cc/cy reduces maintenance
STANDARD EQUIPMENT
•Spindle safety guard
•Halogen machine lamp
•Dual locks on all surfaces
•Toolbox with tools
•Tolerance test sheet
PRECISION MILLING
THAT ONLY ELITE
C A N
50
O F F E R
162920
Industry leading spindle taper
run out 0.00012" ensures
strict tolerances
CSA/UL electrics have been
Hand scraped ways for
greater oil retention and
smooth movements
STOCK NUMBER
894010
9 x 49 Spindle Taper (In. x TPI)
R-8 Quill Diameter (In.)
3-3/8 Number of Spindle Speeds
Variable
Quill Down Feed Rates (IPR)
60 - 4500
0.0015 - 0.003 0.006
Spindle Travel (In.)
5 Head Movement (Deg.)
90° R & L 45° F & B Max Distance Spindle to Table (In.)
18-1/4
Distance Spindle to Column (Max.) (In.)
19
Distance Spindle to Column (Min.) (In.)
6
Collet Capacity
1/8 - 7/8
Table Longitudinal Travel (In.)
36
Table Cross Travel (In.)
12 T-Slots Number and Size (In.)
3 and 5/8 T-Slot Centers (In.)
2-1/2 Work Table Weight Capacity (Lbs.)
550
Travel of Knee (In.)
16
Travel of Ram (In.)
13-3/8
3 HP, 230/460V 3Ph
Prewired 230V
CSA/UL Certified
Motor (HP)
68 x 63 x 84
Weight (Lbs.)
Mill head rotates 90° left and
right for added versatility
2,200
Mill head articulates 45°
up and down permitting
precision angle milling
MILLING
PACKAGES
have created many to choose from. If you
do not see what you need, call or check on
line at www.jettools.com to build your own
custom milling package.
TYPE
TABLE SIZE
ETM-949
ETM-949EVS
Variable Speed
Electronic
Variable Speed
9 x 49
9 x 49
R-8
R-8
STOCK No.
STOCK No.
X-Axis JET Powerfeeds
894100
894300
X-Axis SERVO Powerfeeds
894172
894372
X and Y-Axis JET Powerfeeds
894105
894305
X and Y-Axis SERVO Powerfeeds
894177
894377
X, Y and Z-Axis JET Powerfeeds
894107
894307
X, Y and Z-Axis SERVO Powerfeeds
894179
894379
2-Axis ACU-RITE 200S DRO
894109
894309
2-Axis ACU-RITE 200S DRO and X-Axis JET Powerfeeds
894110
894310
2-Axis ACU-RITE 200S DRO and X-Axis SERVO Powerfeeds
894181
894381
2-Axis ACU-RITE 200S DRO With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894111
894311
2-Axis ACU-RITE 200S DRO With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894182
894382
2-Axis ACU-RITE 200S DRO and X and Y-Axis JET Powerfeeds
894112
894312
2-Axis ACU-RITE 200S DRO and X and Y-Axis SERVO Powerfeeds
894183
894383
2-Axis ACU-RITE 200S DRO With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894113
894313
2-Axis ACU-RITE 200S DRO With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894184
894384
2-Axis ACU-RITE 200S DRO With X, Y and Z-Axis JET Powerfeeds
894114
894314
2-Axis ACU-RITE 200S DRO With X, Y and Z-Axis SERVO Powerfeeds
894185
894385
2-Axis ACU-RITE 200S DRO With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894115
894315
2-Axis ACU-RITE 200S DRO With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894186
894386
3-Axis ACU-RITE 200S DRO (Quill)
894116
894316
3-Axis ACU-RITE 200S DRO (Quill) and X-Axis JET Powerfeeds
894117
894317
3-Axis ACU-RITE 200S DRO (Quill) and X-Axis SERVO Powerfeeds
894187
894387
3-Axis ACU-RITE 200S DRO (Quill) With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894118
894318
3-Axis ACU-RITE 200S DRO (Quill) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894188
894388
3-Axis ACU-RITE 200S DRO (Quill) and X and Y-Axis JET Powerfeeds
894119
894319
3-Axis ACU-RITE 200S DRO (Quill) and X and Y-Axis SERVO Powerfeeds
894189
894389
3-Axis ACU-RITE 200S DRO (Quill) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894120
894320
3-Axis ACU-RITE 200S DRO (Quill) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894190
894390
3-Axis ACU-RITE 200S DRO (Quill) With X, Y and Z-Axis JET Powerfeeds
894121
894321
3-Axis ACU-RITE 200S DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds
894191
894391
3-Axis ACU-RITE 200S DRO (Quill) With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894122
894322
3-Axis ACU-RITE 200S DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894192
894392
SPINDLE TAPER
PACKAGE DESCRIPTION
ACU-RITE 200S 2-Axis Packages
ACU-RITE 200S 3-Axis Quill Packages
52
TYPE
TABLE SIZE
ETM-949
ETM-949EVS
Variable Speed
Electronic
Variable Speed
9 x 49
9 x 49
R-8
R-8
STOCK No.
STOCK No.
3-Axis ACU-RITE 200S DRO (Knee)
894123
894323
3-Axis ACU-RITE 200S DRO (Knee) and X-Axis JET Powerfeeds
894124
894324
3-Axis ACU-RITE 200S DRO (Knee) and X-Axis SERVO Powerfeeds
894193
894393
3-Axis ACU-RITE 200S DRO (Knee) With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894125
894325
3-Axis ACU-RITE 200S DRO (Knee) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894194
894394
3-Axis ACU-RITE 200S DRO (Knee) and X and Y-Axis JET Powerfeeds
894126
894326
3-Axis ACU-RITE 200S DRO (Knee) and X and Y-Axis SERVO Powerfeeds
894195
894395
3-Axis ACU-RITE 200S DRO (Knee) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894127
894327
3-Axis ACU-RITE 200S DRO (Knee) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894196
894396
3-Axis ACU-RITE 200S DRO (Knee) With X, Y and Z-Axis JET Powerfeeds
894128
894328
3-Axis ACU-RITE 200S DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds
894197
894397
3-Axis ACU-RITE 200S DRO (Knee) With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894129
894329
3-Axis ACU-RITE 200S DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894198
894398
2-Axis ACU-RITE 300S DRO
894130
894330
2-Axis ACU-RITE 300S DRO and X-Axis JET Powerfeeds
894131
894331
2-Axis ACU-RITE 300S DRO and X-Axis SERVO Powerfeeds
894199
894399
2-Axis ACU-RITE 300S DRO With X-Axis JET Powerfeeds and JET Powered Draw Bar
894132
894332
2-Axis ACU-RITE 300S DRO With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894200
894400
2-Axis ACU-RITE 300S DRO and X and Y-Axis JET Powerfeeds
894133
894333
2-Axis ACU-RITE 300S DRO and X and Y-Axis SERVO Powerfeeds
894201
894401
2-Axis ACU-RITE 300S DRO With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894134
894334
2-Axis ACU-RITE 300S DRO With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894202
894402
2-Axis ACU-RITE 300S DRO With X, Y and Z-Axis JET Powerfeeds
894135
894335
2-Axis ACU-RITE 300S DRO With X, Y and Z-Axis SERVO Powerfeeds
894203
894403
2-Axis ACU-RITE 300S DRO With X, Y and Z-Axis JET Powerfeeds and KurT Powered Draw Bar
894136
894336
894204
894404
2-Axis ACU-RITE 200S DRO With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894115
894315
894186
894386
3-Axis ACU-RITE 300S DRO (Quill)
894137
894337
3-Axis ACU-RITE 300S DRO (Quill) and X-Axis JET Powerfeeds
894138
894338
3-Axis ACU-RITE 300S DRO (Quill) and X-Axis SERVO Powerfeeds
894205
894405
3-Axis ACU-RITE 300S DRO (Quill) With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894139
894339
3-Axis ACU-RITE 300S DRO (Quill) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894206
894406
3-Axis ACU-RITE 300S DRO (Quill) and X and Y-Axis JET Powerfeeds
894140
894340
3-Axis ACU-RITE 300S DRO (Quill) and X and Y-Axis SERVO Powerfeeds
894207
894407
3-Axis ACU-RITE 300S DRO (Quill) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894141
894341
3-Axis ACU-RITE 300S DRO (Quill) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894208
894408
3-Axis ACU-RITE 300S DRO (Quill) With X, Y and Z-Axis JET Powerfeeds
894142
894342
3-Axis ACU-RITE 300S DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds
894209
894408
3-Axis ACU-RITE 300S DRO (Quill) With X, Y and Z-Axis JET Powerfeeds and JET Powered Draw Bar
894143
894343
3-Axis ACU-RITE 300S DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894210
894410
SPINDLE TAPER
PACKAGE DESCRIPTION
ACU-RITE 200S 3-Axis Knee Packages
ACU-RITE 300S 2-Axis Packages
ACU-RITE 300S 3-Axis Quill Packages
MILLING
PACKAGES CONTINUED
have created many to choose from. If you
do not see what you need, call or check on
line at www.jettools.com to build your own
custom milling package.
TYPE
TABLE SIZE
ETM-949
ETM-949EVS
Variable Speed
Electronic
Variable Speed
9 x 49
9 x 49
R-8
R-8
STOCK No.
STOCK No.
3-Axis ACU-RITE 300S DRO (Knee)
894144
894344
3-Axis ACU-RITE 300S DRO (Knee) and X-Axis Kurt Powerfeeds
894145
894345
3-Axis ACU-RITE 300S DRO (Knee) and X-Axis SERVO Powerfeeds
894211
894411
3-Axis ACU-RITE 300S DRO (Knee) With X-Axis JET Powerfeeds and JET Powered Draw Bar
894146
894346
3-Axis ACU-RITE 300S DRO (Knee) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894212
894412
3-Axis ACU-RITE 300S DRO (Knee) and X and Y-Axis JET Powerfeeds
894147
894347
3-Axis ACU-RITE 300S DRO (Knee) and X and Y-Axis SERVO Powerfeeds
894213
894413
3-Axis ACU-RITE 300S DRO (Knee) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894148
894348
3-Axis ACU-RITE 300S DRO (Knee) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894214
894414
3-Axis ACU-RITE 300S DRO (Knee) With X, Y and Z-Axis JET Powerfeeds
894149
894349
3-Axis ACU-RITE 300S DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds
894215
894415
3-Axis ACU-RITE 300S DRO (Knee) With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894150
894350
3-Axis ACU-RITE 300S DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894216
894416
2-Axis Newall DP700 DRO
894151
894351
2-Axis Newall DP700 DRO and X-Axis JET Powerfeeds
894152
894352
2-Axis Newall DP700 DRO and X-Axis SERVO Powerfeeds
894217
894417
2-Axis Newall DP700 DRO With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894153
894353
2-Axis Newall DP700 DRO With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894218
894418
2-Axis Newall DP700 DRO and X and Y-Axis JET Powerfeeds
894154
894354
2-Axis Newall DP700 DRO and X and Y-Axis SERVO Powerfeeds
894219
894419
2-Axis Newall DP700 DRO With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894155
894355
2-Axis Newall DP700 DRO With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894220
894420
2-Axis Newall DP700 DRO With X, Y and Z-Axis JET Powerfeeds
894156
894356
2-Axis Newall DP700 DRO With X, Y and Z-Axis SERVO Powerfeeds
894221
894421
2-Axis Newall DP700 DRO With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894157
894357
2-Axis Newall DP700 DRO With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894222
894422
SPINDLE TAPER
PACKAGE DESCRIPTION
ACU-RITE 300S 3-Axis Knee Packages
NEwall DP700 2-Axis Packages
54
ETM-949
TYPE
TABLE SIZE
ETM-949EVS
Variable Speed
Electronic
Variable Speed
9 x 49
9 x 49
R-8
R-8
STOCK No.
STOCK No.
3-Axis Newall DP700 DRO (Quill)
894158
894358
3-Axis Newall DP700 DRO (Quill) and X-Axis JET Powerfeeds
894159
894359
3-Axis Newall DP700 DRO (Quill) and X-Axis SERVO Powerfeeds
894223
894423
3-Axis Newall DP700 DRO (Quill) With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894160
894360
3-Axis Newall DP700 DRO (Quill) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894224
894424
3-Axis Newall DP700 DRO (Quill) and X and Y-Axis JET Powerfeeds
894161
894361
3-Axis Newall DP700 DRO (Quill) and X and Y-Axis SERVO Powerfeeds
894225
894425
3-Axis Newall DP700 DRO (Quill) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894162
894362
3-Axis Newall DP700 DRO (Quill) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894226
894426
3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis JET Powerfeeds
894163
894363
3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds
894227
894427
3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894164
894364
3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894228
894428
3-Axis Newall DP700 DRO (Knee)
894165
894365
3-Axis Newall DP700 DRO (Knee) and X-Axis JET Powerfeeds
894166
894366
3-Axis Newall DP700 DRO (Knee) and X-Axis SERVO Powerfeeds
894229
894429
3-Axis Newall DP700 DRO (Knee) With X-Axis JET Powerfeeds and Kurt Powered Draw Bar
894167
894367
3-Axis Newall DP700 DRO (Knee) With X-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894230
894430
3-Axis Newall DP700 DRO (Knee) and X and Y-Axis JET Powerfeeds
894168
894368
3-Axis Newall DP700 DRO (Knee) and X and Y-Axis SERVO Powerfeeds
894231
894431
3-Axis Newall DP700 DRO (Knee) With X and Y-Axis JET Powerfeeds and Kurt Powered Draw Bar
894169
894369
3-Axis Newall DP700 DRO (Knee) With X and Y-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894232
894432
3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis JET Powerfeeds
894170
894370
3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds
894233
894433
3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis JET Powerfeeds and Kurt Powered Draw Bar
894171
894371
3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis SERVO Powerfeeds and SERVO Powered Draw Bar
894234
894434
SPINDLE TAPER
PACKAGE DESCRIPTION
Newall DP700 3-Axis Quill Packages
Newall DP700 3-Axis Knee Packages
200S DRO
300S DRO
See page 58-59 for Dro specifications
DP700 DRO
MILLING
ACCESSORIES
TABLE AND KNEE POWERFEEDS
•X-, Y-, and Z-axis available
•Provides continuously variable
feed rate of up to 32 in./min.
•Adjustable stops allow automatic
shut off
•Built-in clutch helps prevent
damage in overload
•Factory installation available
•Installation of powerfeed will
reduce table travel
•Includes rapid traverse button
STOCK NO.
350195
350196
350197
Model No.
TPFA-2XN
TPFA-2YN
TPFA-2Z
Speed Rate/Variable
(IPM)
0-32
0-32
0-32
Torque (in./lbs.)
780
780
780
Rapid Traverse (IPM)
32
32
32
105W /1Amp,
115V, 1 Ph
105W /1Amp,
115V, 1 Ph
105W /1Amp,
115V, 1 Ph
14
14
14
Motor
Net Weight (lbs.)
Servo ® table and knee powerfeeds
•Smooth surface finish at low speeds and full torque
•Helical gearing and torque limiting friction safety clutch
•Circuit breaker for overload protection
Servo Model NO.
Servo 140
X- Axis
Model Number
Servo 200
350183
Y-Axis
Z-Axis
Servo 150
made in USA
350184
350182
350185
Servo 140
Servo 150
Servo 200
.75 - 25
.5 - 35
.5 - 12
Torque (in./lbs)
105
120
150
Rapid Traverse
35
35
15
110V, 2.5
Amps
110V, 3
Amps
110V, 4
Amps
15
15
21
Speed Rate/Variable
(IPM)
Motor
Net Weight (lbs)
TYPE 150
TYPE 200
TYPE 140
56
SERVO ® AIR POWER DRAW BAR
•Four second tool change
•Easy installation and operation, no special tools needed
•Push button control
•Uses standard shop air supply
•Eliminates excessive downtime
•Increases productivity
•Ends collet sticking
•No special collets or tool holders needed
•Provides uniform tightening of collets
STOCK NUMBER
made in USA
MILL MODEL
894099
ETM-949EVS / ETM-949VS
Kurt ® PowerLockTM Drawbar
Automate your Elite milling machine by installing a Kurt
PowerLock Drawbar.
made in USA
•Reduce tool change time and allow more cutting time in the
cycle which eliminates waste.
•Cuts the tool change time to one-fourth the time required to
change tools manually with wrenches
•Consistent torque on the drawbar rod
STOCK NUMBER
MILL MODEL
894095
ETM-949EVS / ETM-949VS
FLOOD COOLANT SYSTEM
FOR MILLING MACHINES
Air and coolant line connections are encased in braided metal wire. One gallon tank
is made of enamel paint finished metal with removable corrosion resistant inner liner.
*Coolant System Must be Factory Installed in LaVergne, TN
STOCK NUMBER
DESCRIPTION
894092
ELITE Mills Coolant System with Switch
894093
ELITE Mills Coolant Tray
ACU-RITE® DRO SERIES
For Milling Applications
made in USA
Digital Readout packages for JET Elite Machines keep track of position, provide prompt feedback and messaging, and quick configuration of
machine features. Die-cast metal construction ensures unit reliability and displays are very easy-to-read. The days of inaccurate measurement
conversions and productivity lulls caused by lost data are over. The right Digital Readout unit for the JET Elite Mill is here.
ACU-RITE DROs Common Features
•Job Clock
•Multiple Language Support
•Absolute/Incremental
•Near-Zero Warning
200S
300S
As the industry standard in digital readout systems, the Acu-Rite
200S offers state-of-the-art features for milling, turning and
grinding applications.
The Acu-Rite 300S is a fully programmable 4 axes readout
system, now available with a full color display. With the
capability to store and create a library of programs the 300S is
everything you need to create, edit and execute programs on
your manual machine tool.
•2 or 3 axes 5.7" Transmissive LCD display
•Position-TracTM Home Reference
58
•2, 3 or 4 axes 5.7" Full Color Display
•Position-TracTM Home Reference
•Multiple program names with numerous steps
newall digital readouts
For Milling applications
made in
ENGLAND
Add the latest in electronic design innovation to the JET Elite Mill in your shop. Preforms all essential functions
and provides added flexibility to your operation.
DP700
The DP700 is the latest in Newall's line of a powerful and intuitive DROs. The unit is housed in
a rugged, ergonomically designed casting. The DRO features all of the essential functions for
milling, boring, turning, grinding, and general machining operations. The DP700 is compatible
with Newall’s Spherosyn and Microsyn encoders which withstand the harshest shop conditions.
•Bolt Hole Circle
Routine
•Line Hole Routine
•Arc Contouring
•Programmable
Memory/Teach
•Polar Coordinates
•Line Hole Calculator
•Tool Offsets
•Taper Calculations
•Axis Vectoring/
•Clean, Crisp, Easy to
•Linear and Segmented
•Intuitive Message
•Undo
•RS232 Output
•Languages: English,
•Long Life Membrane
Summing
Read, LEDs
Error Comp.
Window
Keypad
French, German,
Spanish, Italian,
Turkish, Czech,
Russian, Portuguese,
Danish
•Solid cast construction
•Safe, Low Voltage
Power Supply (UL)
•Panel Mount Version
Available
2 or 3 Axis Acu-Rite
MillPwr CNC Control
•Increased Productivity, mill more efficiently
•Ease of use, convenient, user-friendly and
•Bolthole Calculations, calculate bolthole
•10" flat panel, vivid, color, LCD display to view
•Tool Offsets and Tool Library
•Jog Control, move quickly from one location to
•Menu-prompted Conversational programming,
and effectively
patterns instantly
another—using one axis at a time or any two
axes simultaneously
•3-D Contouring, ability to import and run
G-code files from CAD/CAM programs
•Mirror/Repeat/Rotate, easily manipulate
part programs to save time and reduce
program steps.
multi-faceted
immediate graphic feedback
easily create part programs, edit, reverse,
change, delete and copy/move steps—follow
the menu prompts and let MILLPWR® do
the rest
10" Flat panel, color LCD display to view
immediate graphic feedback
•Info Button, built-in help screens for content
specific jobs
•Built-in Calculator, perform standard, trig
and geometry calculations and transfer them
directly into part programs
Precision Glass Scales For Improved
Accuracy and Consistency, Elimination
of Backlash and Much More!
made in USA
A NEW
LEGACY OF
SAWS
At the heart of every metalworking operation, there are
saws. Saws that are being challenged to cut a wider
variety of materials in different ways than ever before.
Saws that need to demonstrate new kinds of flexibility,
are counted on to last longer, and operate more safely
at the same time.
Mitering and dual mitering bring an added level of
capability.
All saws come standard with variable speed. Table
heights have been optimized, and a completely redesigned swing away control panel gives the user
a safer and more convenient way to operate the
horizontal saws.
These are the most precise, most durable, and safest
bandsaws you could ever put in your shop.
They truly are, Elite.
SAW CONTENT
Horizontal Bandsaw Overview..................... 62-65
10x18 Dual Mitering Horizontal Bandsaw.... 66-67
10x18 Horizontal Bandsaw......................... 68-69
9x16 Horizontal Bandsaw........................... 70-71
Vertical Bandsaw Overview......................... 76-79
20" / 26" Vertical Bandsaw........................ 80-81
60
HORIZONTAL BANDSAWS
BUILT FOR Precision, DURABILITY & SAFETY
SWING-AWAY CONTROL PANEL
The ELITE swing away panel relocates saw controls to a
single location, offering finger-tip operation of the major
saw functions.
VARIABLE SPEED DRIVETRAIN
The variable speed drive system, coupled with a hardened
and ground worm drive gear, provides complete blade
speed control for optimized cutting performance.
INCREASED BED HEIGHT
To reduce user fatigue and increase safety of the American
worker we increased the saw bed height up to 32".
CSA/UL APPROVED ELECTRICS
For added safety, the motor and electrics of ELITE saws follow strict
guidelines and electrical requirements to be certified by CSA Group.
162920
62
64
HORIZONTAL
BANDSAWS
A user experience
unlike any other
These horizontal bandsaws feature mitering & dual
mitering, and a completely re-designed swing away control
panel for greater convenience.
10 x 18 DUAL MITERING
HORIZONTAL BANDSAWS
FEATURES
•ELITE swing away panel relocates saw controls to a
single location, offering finger-tip operation of most
major saw functions
•Semi-Automatic bow raises after cut to predetermined
height
•Automatic blade breakage sensor detects accidental
breakage and interrupts the power
•Heavy-duty construction reduces vibration and
deflection
•Blade is fully guarded for operator safety
•Built-in, self propelled blade brush prevents chip build
up in blade guides
•Automatic blade shut off switch stops the sawing
process
•Hydraulic downfeed control is easily adjusted enabling
feed rates to evolve with the various types of materials
•Variable speed drivetrain allows operator to fine tune
the blade speed fast and easily
•To reduce user fatigue and increase safety of the
worker we increased the saw bed height to 32"
•Integrated pressurized wash hose for easy machine
cleaning
STANDARD EQUIPMENT
•Coolant System
•Quick positioning vise for EHB-1018VM
•Hydraulic vise for rapid clamping of materials on EHB1018VMH
•Adjustable material stop
•1" 4/6VT Bi-Metal blade
PRECISION SAWING
THAT ONLY ELITE
C A N
66
O F F E R
Dual mitering allows for
compound angle cutting of 60°
right and 45° left
Tungsten carbide blade guides
with precision bearings stabilizes
the blade for increase accuracy
and extends blade life
Large hand wheel with
blade tensioning guide
accurately measures blade
pressure
STOCK NUMBER
891070
891080
EHB-1018VM
EHB-1018VMH
Round at 90° (In.)
10
10
Round at 60° (In.)
6
6
Round at 45° (In.)
10
10
Rectangle at 90° (In.)
10 x 17
10 x 17
6x5
6x5
10 x 12
10 x 12
Model Number
Cutting Capacities
Square at 90° (In.)
10 x 10
10 x 10
5-1/2 x 5-1/2
5-1/2 x 5-1/2
10 x 10
10 x 10
Vise Swivels (Deg.)
0
0
60° R, 45° L
60° R, 45° L
1 x .035 x 144
1 x .035 x 144
Head Movement (Deg.)
Blade Size (In.)
Blade Wheel Diameter (In.)
Blade Speeds (SFPM)
Bed Height (In.)
Motor (HP)
14
Variable 50-275
Variable 50-275
32
32
2 HP, 230/460V
CSA/UL Certified
2 HP, 230/460V
CSA/UL Certified 85 x 40 x 44
85 x 40 x 44
Net Weight (lbs.)
1,034
1,034
Gross Weight (lbs.)
1,144
1,144
162920
Following strict guidelines CSA
/ UL electrics have been added
for increased safety
14
Quick positioning vise for
EHB-1018VM, for clamping of
materials
10 x 18
HORIZONTAL BANDSAW
FEATURES
•ELITE swing away panel relocates saw controls to a
single location, offering finger-tip operation of most
major saw functions
•Automatic blade breakage sensor detects accidental
breakage and interrupts the power
•Heavy-duty construction reduces vibration and
deflection
•Large hand wheel with blade tensioning guide
accurately measures blade pressure to
prevent breakage
•Built-in, self propelled blade brush prevents chip
build up in blade guides
•Automatic blade shut off switch stops the
sawing process
•Hydraulic downfeed control is easily adjusted
enabling feed rates to evolve with the various types
of materials
•Variable speed drivetrain allows operator to fine tune
worker we increased the saw bed height to 32"
STANDARD EQUIPMENT
•Coolant System
•Quick positioning vise
PRECISION SAWING
THAT ONLY ELITE
C A N
68
O F F E R
Dual Mitering Available on both
EHB-1018VM & EHB-1018VMH
the blade for increase accuracy
Integrated pressurized wash
hose for easy machine cleaning
STOCK NUMBER
Model Number
891060
EHB-1018V
Cutting Capacities
Round at 90° (In.)
Round at 45° (In.)
5 x 18
8-1/2 x 9
10 x 10
8-1/2 x 8-1/2
Vise Swivels (Deg.)
45
Blade Size (In.)
Blade Speeds (SFPM)
Bed Height (In.)
Motor (HP)
CSA / UL electrics have been
clamping of materials
9
162920
10
0
1 x .035 x 132-1/2
14
Variable 50-275
32
2 HP, 230/460V
CSA/UL Certified 74 x 30 x 44
Net Weight (lbs.)
704
Gross Weight (lbs.)
814
9 x 16
HORIZONTAL BANDSAW
FEATURES
•ELITE swing away panel relocates saw controls to a single
location, offering finger-tip operation of most major saw
functions
•Automatic blade breakage sensor detects accidental breakage
and interrupts the power
•Heavy-duty construction reduces vibration and deflection
•Built-in, self propelled blade brush prevents chip build up in
blade guides
•Automatic blade shut off switch stops the sawing process
•Hydraulic downfeed control is easily adjusted enabling feed
rates to evolve with the various types of materials
•Variable speed drivetrain allows operator to fine tune the blade
speed fast and easily
•To reduce user fatigue and increase safety of the American
worker we increased the saw bed height to 32".
•Following strict guidelines, CSA / UL electrics have
STANDARD EQUIPMENT
•Coolant System
PRECISION SAWING
THAT ONLY ELITE
C A N
70
O F F E R
the blade for increase accuracy.
Large hand wheel with blade
tensioning guide accurately
measures blade pressure
hose for easy machine
cleaning
STOCK NUMBER
Model Number
891050
EHB-916V
Cutting Capacities
Round at 90° (In.)
Round at 45° (In.)
6 x 16
7 x 8-1/2
9x9
7x7
Vise Swivels (Deg.)
45
Blade Size (In.)
Blade Speeds (SFPM)
Bed Height (In.)
Motor (HP)
Easy to read rule that features
large, easy-to-read fonts
7
Quick positioning
vise for clamping of
materials
9
0
1 x .035 x 128-1/2
14
Variable 50-275
32
2 HP, 230/460V
CSA/UL Certified
65 x 28 x 42
Net Weight (lbs.)
616
Gross Weight (lbs.)
726
8 x 13 MITERING
HORIZONTAL BANDSAW
FEATURES
•Heavy-duty construction reduces vibration and deflection
•Large handwheel with blade tensioning guide accurately
measures blade pressure to prevent breakage
•Automatic blade shut off switch stops the sawing process
•Hydraulic downfeed control is easily adjusted enabling feed
rates to evolve with the various types of materials
•To reduce user fatigue and increase safety of the worker we
increased the saw bed height to 32" .
STANDARD EQUIPMENT
•Coolant System
PRECISION SAWING
THAT ONLY ELITE
C A N
72
O F F E R
ELITE swing away panel
relocates saw controls to
a single location, offering
finger-tip operation of most
major saw functions
Mitering allows for angle cuts
up to 45° right
with precision bearings
stabilizes the blade for
increase accuracy
STOCK NUMBER
Model Number
891020
EHB-8VSM
Cutting Capacities
Round at 90° (In.)
Round at 45° (In.)
6
13 x 5-1/4
8x8
7x7
6x6
Vise Swivels (Deg.)
Blade Size (In.)
Blade Speeds (SFPM)
Bed Height (In.)
Motor (HP)
Variable speed drivetrain allows
operator to fine tune the blade
8
45
45° R
1 x 0.35 x 114-1/2
11-5/8
Variable 80 - 310
30
1-1/2 HP, 115/230V,
1Ph
CSA/UL Certified
62-1/2 x 23 x 48
Net Weight (lbs.)
792
Gross Weight (lbs.)
924
hose for easy machine cleaning
8 x 13
HORIZONTAL BANDSAW
FEATURES
•Heavy-duty construction reduces vibration
and deflection
•Large handwheel with blade tensioning guide
accurately measures blade pressure to prevent
breakage
•Automatic blade shut off switch stops the
sawing process
•Hydraulic downfeed control is easily adjusted
enabling feed rates to evolve with the various types
of materials
worker we increased the saw bed height to 32" .
STANDARD EQUIPMENT
•Coolant System
•Quick Positioning Vise
PRECISION SAWING
THAT ONLY ELITE
C A N
74
O F F E R
ELITE swing away panel relocates
saw controls to a single
location, offering finger-tip
operation of most major saw
functions
with precision bearings
stabilizes the blade for
increase accuracy.
Variable speed drivetrain allows
operator to fine tune the blade
STOCK NUMBER
Model Number
891015
EHB-8VS
Cutting Capacities
Round at 90° (In.)
Round at 45° (In.)
13 x 5-1/4
8x8
7x7
6x6
Vise Swivels (Deg.)
45
0
Blade Speeds (SFPM)
Bed Height (In.)
Motor (HP)
clamping of materials
6
Blade Size (In.)
hose for easy machine
cleaning
8
1 x 0.35 x 114-1/2
11-5/8
Variable 80 - 310
32
1-1/2 HP, 115/230V,
1Ph
CSA/UL Certified
62-1/2 x 23 x 48
Net Weight (lbs.)
660
Gross Weight (lbs.)
770
76
VERTICAL
BANDSAWS
POWER AND BALANCE
Elite Vertical Bandsaws feature variable speed drivetrains,
and precision-ground articulating tables tor durability,
and flexibility.
VERTICAL BANDSAWS
BUILT FOR Precision, DURABILITY & SAFETY
Precision Blade Wheels
Precision balanced cast-iron blade wheels feature a bonded rubber blade track
transmitting maximum speed and torque to the blade for precision sawing of
ferrous and non-ferrous materials.
Precision Ground Articulating Table
Precisely ground, articulating table with 10° left & 45° right movement for
contour cutting at any angle.
Bi-Metal Blade Welder
Bi-Metal Blade Station allows the operator to repair broken blades or fabricate new
blades quickly, but also allows for the blade to be purposely cut, routed through the
center of a part, and re-welded in order to make interior cuts.
Variable Speed Drive Train with LED Readout
50-5000 R.P.M's to cut just about any material on the market
CSA/UL CERTIFIED ELECTRICS
162920
78
For added safety the motor and electrics of all Elite Saws follow strict
guidelines and electrical requirements and are certified by the CSA Group.
20" & 26" VARIABLE SPEED
VERTICAL BANDSAWS
FEATURES
•Heavy-duty completely enclosed steel frame provides
strength and rigidity
•Tungsten carbide blade guides with precision bearings
stabilize the blade for increased accuracy and extended
blade life
•Hand wheel with blade tensioning guide accurately
measures blade pressure to prevent breakage
•4.2 Kilo-volt Ampere bi-metal blade welder has a safety
glass cover for increased user safety
•Following strict guidelines, CSA / UL electrics have been
STANDARD EQUIPMENT
•Bi-Metal blade
•Protractor
•Work Lamp
•Rip fence
•Chip pan
PRECISION SAWING
THAT ONLY ELITE
C A N
80
O F F E R
Variable speed drivetrain
allows operator to fine tune
Precision balanced cast-iron
blade wheels transmit speed and
torque to the blade
Precisely ground, articulating
table with 10° Left & 45° Right
movement for contour cutting
at any angle
STOCK NUMBER
Model Number
Height Capacity (Max.) (In.)
Throat Capacity (In.)
Blade Length (In.)
Blade Width (Min.-Max.) (In.)
891115
EVBS-26
13
14
20
26
151-1/2
185-1/2
1/8 - 1
1/8 - 1
Blade Speeds (SFPM)
Variable 50-5000
Variable 50-5000
24 x 22
27-1/2 x 23-1/2
Table Height (In.)
39-3/8
39-3/8
10 L & 45 R
10 L & 45 R
2HP, 230/460V, 3Ph
Prewired 230V
CSA/UL Certified
2HP, 230/460V, 3Ph
Prewired 230V
CSA/UL Certified
Table Tilt (Deg.)
Motor
Built-in chip blower re-directs
debris from the cutting area,
while the magnifying glass
provides a clear view
891100
EVBS-20
40 x 29 x 77-1/2
51 x 32 x 83-1/2
Net Weight (lbs.)
1,102
1,433
Gross Weight (lbs.)
1,356
1,655
Easily adjustable blade guard for
increased safety
Y E A R
WARRANTY
Register your ELITE machine online at www.jettools.com and activate the industry’s only 3-Year
full warranty on parts and labor. The ELITE 3-Year warranty is backed by JET with over 55 years
of providing unparalleled service and support.
30-Point inspection on all
Elite Mills and Lathes in the
USA prior to shipment
• Meets or exceeds all listed tolerances
• Completely cleaned and shop ready
• Electrical components and connections
• Test Cuts on material
• 30 Minutes of Operation
Installations on All Elite
Mills and Lathes occur in
Nashville, TN
To customize an ELITE mill or lathe, call or check online at
www.jettools.com to build your own custom ELITE machine.
For more Information
call us toll free 1-800-274-6848
or visit jettools.com/redassurance
82
INDUSTRY-LEADING
WARRANTY AND SERVICE
GET PARTS FAST
JET has more than 40,000 parts in stock and ready to ship within
24-48 hours. Our parts are built with the same precision processes
as all of our machines. So, when you buy genuine Jet Elite OEM
parts you can be sure they’ll get your machine back up and running
fast. Jet Elite Product Manuals are readily available to download
from our website to help you quickly identify the replacement parts
you need.
Real-Time Tech Support
JET provides real-time technical service from our Tennessee
offices. Our team has decades of experience using, servicing, and
troubleshooting our machines.
Call our tech service hotline if you need help with the following:
• Product Setup and Adjustment
• Application-Based Problem Resolution
• Service Call Support
• Warranty & Parts Support.
SERVICE CENTERS
• U.S. Tech Support
• Authorized Service Centers In All 50 States
Stock # 904490
Qty 3000
Date 10/2013

Catalog

Transcription

Similar documents

HARDINGE® HLV-H - Babin Machine Tool

End-of-Summer Savings! - LittleMachineShop.com

One (1) Preowned Nardini 1760E Gap Bed Engine Lathe

ipc group - Infinity Asset Solutions

Paul Strisik NA - American Fine Art Magazine

Short automatic barfeeder

Untitled - Bron

alphapack - Combi Packaging Systems