ThomaPLaST® I - Reichelt Chemietechnik

Transcription

ThomaPLaST® I - Reichelt Chemietechnik
Reichelt
Chemietechnik
GmbH + Co.
ThomaPLAST® I
Laboratory Plastics
Containers
Laboratory Instruments
Laboratory Stoppers and Caps
Metering Facilities
Stirring and Mixing
Semi-finished Products
Filtration
Dialysis Membranes
Filter Housings
Filter Disks and Filter Candles
Sintered Elements
Filter Cloths
Reichelt Chemietechnik ’15
Shopping per mouseclick
www.rct-online.de
Reichelt
Chemietechnik
GmbH + Co.
Englerstraße 18
D-69126 Heidelberg
Germany
Tel. +49 6221 3125 0
Fax +49 6221 3125 10
email:
[email protected]
Internet:
www.rct-online.de
Heiliggeistkirche in Heidelberg
Content: Laboratory Plastics
page
Containers
• Bottles, carboys and accessories
made of FEP, HDPE, LDPE, PC, PFA, PP, PS, PTFE, PVC
bottles: dropping, wash, scintillation, narrow-neck, wide-mouth
bottles: storage, cell culture; carboys, jerrycans
accessories: litre scale, closures, wall drying rack, tank connection
3 - 13
• Tubes, jars and boxes made of HDPE, LDPE, PE, PFA, PP, PS, TPX
jars: shipment, specimen, packaging, storage, weight
sample vial, conway diffsion cell, transfer reaction vessel
with cover, screw closure
13 - 20
• Dishes and crucibles made of PFA, PP, PS, PTFE
dishes: petri, weighing, evaporating, crystallization, crucibles
partially with spout
20 - 22
• Measuring beakers and measuring flasks made of ECTFE, PFA, PMP, PP, PTFE, SAN, TPX
beakers: standard, with handle, scoop, tapered measuring; cylinders, flasks (Erlenmeyer)
partially with closure
22 - 27
• Funnels and accessories made of FEP, PP, PTFE, TPX, aluminium
funnels: standard, high-speed, powder, separatory, thistle tube
accessories: strainer, holder
27 - 29
• Test tubes, centrifuge tubes made of PP, PS, PTFE
partially with rim, closure, label, stopper
29 - 30
• Test tube racks, desiccators, accessories made of LDPE, PC, PP, PVC
30 - 32
• Cases, trays, bowls, pails and DEWAR-vessels
made of LDPE, PFA, PP, PVC, XLPE
32 - 36
Laboratory Instruments
• Scoops, spoons, spatulas and tweezers
made of HDPE, PFA, PP, POM, PTFE, styrene, forged steel, chromium nickel steel
36 - 38
• Pestles and mortars made of melamine
38
• Precision knives and scalpels made of aluminium, stainless steel, steel
39 - 40
Metering Facilities and Metering Devices
40 - 42
• Pipettes, burettes and acessories made of HDPE, NR, PE, PP
dropping pipette, pipette suction bulb, universal bulb pipette, squeeze bulb pipette filler
Stirring and Mixing
• Stirrers and stirring devices made of PTFE, PP
stirring: bars, spatulas; magnetic: stirrers, stirring bars, retrievers
42 - 44
Drying Tubes, Gas Sampling Bulbs and Accessories made of LDPE, PFA, PTFE, PP
44 - 45
Laboratory Stoppers and Caps
• Laboratory stoppers made of FPM, NBR, NR, silicone
• Laboratory caps made of silicone, aluminium
45 - 50
50 - 51
THOMAPLAST® I - 2015
Content: Laboratory Plastics
page
Laboratory Semifinished Products and Aids
• Glass fibre wool, boiling stones, balls, powder, blowing bulbs, markers
51 - 53
Protection
• Mats, bench liners, antislip Sheetings and Lead Weight Rings
53 - 54
Laboratory Equipment and Utensils
• cuvette washer, service case, clamping vice, holder, sieve set Content: Separation Technology – Filtration
54 - 55
page
Dialysing Tubing, Dialysing Chamber, Dialysing Cylinder
56 - 61
Anion-Exchange Membranes and Cation-Exchange Membranes
61 - 63
Hollow Fibres
63 - 64
Borosilicate Glass Filter Disks
64 - 66
Sintered Plates, Sintered Rods and Sintered Pipes
66 - 75
Round Filters and Membranes
75 - 83
Screen Cloths, Filter Cloths, Fleeces and Mats
84 - 93
Frits, Eluent Filters and Immersion Filters
93 - 96
Prefilters and Filter Holders
96 - 103
Filter Modules
103 - 104
Filter Housings and Filter Elements
104 - 111
Fine Filter Systems made of PVDF and PTFE
111 - 112
THOMAPLAST® I - 2015
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
Item
Containers
Bottles,
Carboys
and Accessories
Laboratory
Plastics
​
10889
10890
10891
10892
10893
THOMAPLAST®-Dropping Bottle made of LDPE sterilizable
Product specification
•Dropping bottle made of flexible, translucent LDPE with wide mouth.
•Dropping bottle guarantees accurate, reliable, defined, and repeatable
metering of aqueous fluids; represents an ideal alternative to conventional pipettes or other metering systems.
•Dropping bottles are fitted with coloured cups for easier identification.
•Drop size: approx. 40 µl.
•Meets the requirements of the USP class VI and the U.S. FDA for food
contact.
•Sterilization with ionizing radiation possible.
​
Volume
ml
Outside
Ø
mm
External
thread
​
Unit
Price
piece
EURO
50
100
250
500
1,000
37
43
58
74
92
GL18
GL18
GL25
GL25
GL32
12
12
6
6
3
42.00
48.00
39.00
48.00
33.00
THOMAPLAST®-Dropping and Wash Bottle
made of LDPE
Product specification
•Transparent, natural-coloured, well standing wash bottle made of
LDPE with integrated spray delivery tube, narrow-mouth and thread
according to DIN 168.
•Prominent product advantage: no contamination of the delivery tube
during refilling.
​
Item
Volume
​
ml
Outside
Ø
mm
12002
12008
12012
12014
12015
12017
12018
12019
4
8
8
15
15
15
15
15
20
20
20
25
25
25
25
25
Height
mm
Colour
code
​
Unit
Price
piece
EURO
Item
54
65
65
75
75
75
75
75
white
white
red
white
yellow
green
red
blue
5
5
5
5
5
5
5
5
35.00
40.00
40.00
45.00
45.00
45.00
45.00
45.00
​
10923
10924
Volume
Height
Unit
ml
Ø neck
inside
mm
Price
mm
piece
EURO
250
500
24
24
143
181
5
5
54.00
64.00
THOMAPLAST®-Scintillation Bottle made of HDPE
Product specification
•Stable design made of HDPE with leakproof screw closure.
​
THOMAPLAST -Dropping Bottle made of LDPE long tip
®
Product specification
•Round, transparent bottle made of LDPE with drop dispenser and
closure cap, thread according to DIN 168.
​
Item
​
61070
Volume Outside Ø Ø neck
ml
mm
mm
20
27
16
Height
mm
Unit
piece
Price
EURO
60
50
40.00
THOMAPLAST® I - 2015 3
Laboratory Plastics - Bottles, Carboys and Accessories
THOMAPLAST®-Safety Wash Bottle made of LDPE with label
Product specification
•Bottles from PE-LD or PP, spray tube from PP.
•More safety due to the durable safety imprint in accordance to Directive
(EC) No. 1272/2008 (GHS), as well as with all important information:
•Substance name in German, English, French and Spanish
•Chemical formula, CAS No., hazard pictogram, signal word
•Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code
•Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage
or dripping with the bright red VENT-CAP screw cap, which prevents
almost all static overpressure.
Containers
Product specification
•Non-rigid, cylindrical, well standing wash bottle made of plasticized
LDPE in four bright colours and with tight closure system, as closure
cap and outlet pipe are made of one piece. Colours are food-suited
and cadmium-free.
Item Volume Outside Height External Colour Unit Price
Ø
thread
​
ml
mm
mm
​
​
piece EURO
10925
10926
10927
10928
10929
10930
10931
10932
​
250
250
250
250
500
500
500
500
58
58
58
58
74
74
74
74
135
135
135
135
180
180
180
180
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
red
blue
yellow
green
red
blue
yellow
green
5
5
5
5
5
5
5
5
46.00
46.00
46.00
46.00
54.00
54.00
54.00
54.00
THOMAPLAST®-Wash Bottle made of PFA
Product specification
•Narrow-neck bottles made of highly transparent perfluoroalkoxy (PFA),
well suited for all organic and inorganic solutions, even at low and high
temperatures, screw cap made of ETFE, dispensing tube made of FEP
​
Item Volume
​
47799
47800
47801
47802
47803
47804
47805
47806
47807
47808
47809
47810
47811
47812
47813
47814
47815
47816
Imprint
ml
​
250
250
250
250
250
250
500
500
500
500
500
500
1,000
1,000
1,000
1,000
1,000
1,000
DEST. WASSER
ACETON
METHANOL
ISOPROPANOL
ETHYLACETAT
ETHANOL
DEST. WASSER
ACETON
METHANOL
ISOPROPANOL
ETHYLACETAT
ETHANOL
DEST. WASSER
ACETON
METHANOL
ISOPROPANOL
ETHYLACETAT
ETHANOL
O-Ø Height External Unit Price
thread
mm mm
​
piece EURO
58
58
58
58
58
58
74
74
74
74
74
74
92
92
92
92
92
92
135
135
135
135
135
135
180
180
180
180
180
180
221
221
221
221
221
221
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL25
GL32
GL32
GL32
GL32
GL32
GL32
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
36.00
36.00
36.00
36.00
36.00
36.00
42.00
42.00
42.00
42.00
42.00
42.00
51.00
51.00
51.00
51.00
51.00
51.00
Item
​
286681
286691
286701
THOMAPLAST®-Wash Bottle made of LDPE - coloured
4 THOMAPLAST® I - 2015
Height
mm
Outside
Ø
mm
External
thread
​
ml
250
500
1,000
Unit
Price
piece
EURO
155
185
230
60
75
95
GL25
GL25
GL32
1
1
1
144.00
185.00
225.00
THOMAPLAST®-Narrow-Neck Bottle made of LDPE
Product specification
•LDPE, translucent, natural-coloured, with tight screw cap
​
​
Volume
Laboratory Plastics - Bottles, Carboys and Accessories
Item
​
62051
62052
62053
62054
62055
62056
62057
62058
62059
62060
62061
62062
Volume Outside Ø Ø neck
ml
mm
mm
10
20
30
50
100
200
250
500
1,000
2,000
3,000
5,000
26
32
34
37
47
58
61
75
98
120
138
162
9
9
9
13
13
13
19
19
22
22
24
31
Containers
Height
mm
Unit
piece
Price
EURO
Item
​
48
58
64
86
106
134
141
178
225
265
300
355
10
10
10
10
10
5
5
5
5
3
2
1
21.00
25.00
27.00
30.00
33.00
23.00
27.00
33.00
43.00
48.00
45.00
36.00
28669
28670
28671
28672
Volume
ml
Height
mm
Outside Ø
mm
Unit
piece
Price
EURO
100
250
500
1,000
120
155
185
230
45
60
75
95
1
1
1
1
128.00
144.00
172.00
223.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle
made of PP
Product specification
•Translucent, sterilizable (up to +130 °C) bottle made of polypropylene
with narrow neck, absolutely tight screw closure and a great degree of
chemical resistance, robust polypropylene design.
​
THOMAPLAST®-Narrow-Neck Bottle made of PP
Product specification
•Translucent, transparent, sterilizable (up to +130 °C) bottle made of
polypropylene with narrow neck, absolutely tight screw closure and a
great degree of chemical resistance.
​
Item
​
Item
​
10826
40129
40130
40131
40132
10827
Volume Outside Ø Ø neck
ml
mm
mm
50
100
250
500
1,000
2,000
40
47
61
75
98
120
13
13
19
19
21
23
Height
mm
Unit
piece
Price
EURO
90
106
141
178
225
270
10
10
5
3
3
2
49.00
54.00
44.00
42.00
51.00
51.00
THOMAPLAST®-Narrow-Neck Bottle made of PFA
Product specification
•A bottle made of highly transparent perfluoroalkoxy (PFA) for
contamination-free working with pure and aggressive media even at
temperatures of -200 to +200 °C, with absolutely leakproof screw
closure made of ETFE.
10797
10798
10799
10800
10801
10802
10803
10804
10805
10806
10807
Volume Outside Ø Ø neck
ml
mm
mm
4
8
15
15
30
60
125
250
500
1,000
2,000
16
25
24
25
34
39
50
61
73
90
120
8
13
9
13
14
14
18
18
22
27
40
Height
mm
Unit
piece
Price
EURO
42
45
73
58
60
85
100
130
170
215
235
10
10
10
10
10
10
10
5
5
3
1
40.00
40.00
60.00
43.00
46.00
49.00
51.00
41.00
67.00
57.00
34.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle
made of FEP
Product specification
•Transparent narrow-mouth bottle made of FEP supplied with hermetically sealing screw cap made of ETFE. Temperature resistance from
-105 to +150 °C, very good chemical resistance.
​
​
THOMAPLAST® I - 2015 5
Laboratory Plastics - Bottles, Carboys and Accessories
Item
​
60958
60959
60960
60961
60962
60963
60964
Volume
ml
Ø neck
mm
Height
mm
Unit
piece
Price
EURO
30
60
125
250
500
1,000
2,000
15
15
18
18
20
20
35
75
80
115
135
170
195
240
1
1
1
1
1
1
1
54.00
62.00
75.00
113.00
128.00
167.00
294.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle
made of LDPE - square
Containers
Item
​
10819
10820
10821
10822
10823
Volume
Height
ml
Outside
Ø
mm
500
1,000
2,000
5,000
10,000
87
108
131
178
222
165
202
245
315
394
mm
External Unit
thread
​
piece
GL25
GL32
GL32
GL45
GL63
5
5
2
1
1
Price
EURO
47.00
67.00
82.00
36.00
49.00
THOMAPLAST®-Narrow-Neck Storage Bottle
made of PC - square
Product specification
•Glass-clear, graduated storage bottles made of breakproof polycarbonate with tightly closing screw cap made of PP. The square-prismatic
shape allows room-saving placing.
•Free of leachable components and biocompatible.
•Temperature loadable between -135 °C and +135 °C, sterilizable and
particularly suited for freezer storage.
•Not suitable for solvents, strong acids, and alkaline solutions.
Product specification
•Square, transparent bottle made of LDPE with closure cap,
thread according to DIN 168.
​
​
Item
​
10884
10886
10887
10888
Volume External Dimensions Height
thread
ml
​
mm
mm
100
250
500
1,000
GL25
GL28
GL28
GL32
43 x 43
80 x 80
90 x 90
80 x 80
76
80
106
187
Unit
Price
piece
EURO
12
12
6
3
60.00
72.00
45.00
30.00
THOMAPLAST®-Narrow-Neck Conical Shoulder
Bottle made of PP - with screw closure
Product specification
•Transparent conical shoulder bottle with narrow neck and leakproof
screw closure, specified according to DIN 12036 and 12039 resp.,
made of polypropylene.
​
Item
Volume
​
ml
Outside
Ø
mm
10817
10818
100
250
52
70
6 THOMAPLAST® I - 2015
Height
100
132
mm
External Unit
thread
​
piece
GL18
GL25
10
10
Price
EURO
40.00
53.00
Item
​
Volume Dimensions Ø neck
ml
mm
mm
48014
30
48015
60
48016 125
48017 250
48018 500
48019 1,000
38 x 38
40 x 40
52 x 52
60 x 60
75 x 75
90 x 90
14
18
28
28
28
28
Height
mm
Unit
piece
Price
EURO
62
82
105
145
175
220
3
3
3
3
3
2
30.00
36.00
36.00
54.00
69.00
71.00
THOMAPLAST®-Narrow-Neck Storage Bottle
made of PP - square
Laboratory Plastics - Bottles, Carboys and Accessories
Product specification
•Transparent, graduated storage bottles of high chemical resistance,
made of shatterproof polypropylene (PP), with tightly closing screw
cap made of the same material. The square-prismatic shape allows
room-saving placement.
•Free of leachable components and biocompatible.
•Temperature-loadable from -140 to +130 °C.
•Sterilizable and particularly suitable for deep-freezing.
Containers
Product specification
•HDPE, screw cap made of PP with sealing disk made of PE.
Item
​
62071
62072
62073
62074
62075
62076
​
Item
​
48020
48021
48022
48023
48024
48025
Volume Dimensions Ø neck
ml
mm
mm
30
60
125
250
500
1,000
38 x 38
40 x 40
52 x 52
60 x 60
75 x 75
90 x 90
14
18
28
28
28
28
Height
mm
Unit
piece
Price
EURO
62
82
105
145
175
220
10
10
10
5
5
5
41.00
51.00
72.00
57.00
64.00
80.00
THOMAPLAST -Wide-Mouth Bottle made of LDPE
®
Volume Outside Ø Ø neck
ml
mm
mm
100
250
500
1,000
1,500
2,000
48
66
81
101
115
126
31
41
54
69
69
69
Height
mm
Unit
piece
Price
EURO
79
102
124
155
175
195
10
6
6
5
3
2
29.00
30.00
36.00
34.00
39.00
32.00
THOMAPLAST®-Wide-Mouth Bottle made of HDPE square, leakproof
Product specification
•Rectangular, natural-coloured, translucent, dimensional stable,
impact-resistant wide-mouth bottle made of HDPE with leakproof
screw closure.
​
Product specification
•LDPE, translucent, natural-coloured; with leakproof screw closure
​
Item Volume Dimensions
Item
​
62040
62041
62042
62043
62044
62045
62046
62047
62048
62049
Volume Outside Ø Ø neck
ml
mm
mm
50
100
200
250
300
500
750
1,000
1,500
2,000
39
48
59
64
67
77
88
95
108
120
24
24
31
31
31
39
39
50
50
50
Height
mm
Unit
piece
Price
EURO
75
95
116
122
130
156
175
207
228
250
10
10
10
6
6
5
5
3
3
3
30.00
36.00
45.00
33.00
39.00
36.00
44.00
48.00
51.00
51.00
​
ml
mm
10845 250
10846 500
10847 1,000
59 x 59
68 x 68
90 x 90
Ø Height External Unit Price
neck
thread
mm mm
​
piece EURO
30
30
50
110
146
170
GL50
GL65
GL65
5
5
3
39.00
49.00
45.00
THOMAPLAST®-Wide-Mouth Bottle made of PP
Product specification
•Robust, transparent, sterilizable (up to +130 °C) bottle made of
polypropylene, with leakproof screw closure.
​
THOMAPLAST®-Wide-Mouth Bottle made of HDPE
​
Item
​
60966
60967
60968
Volume Outside Ø Ø neck
ml
mm
mm
60
150
250
40
50
60
21
26
35
Height
mm
Unit
piece
Price
EURO
85
105
145
10
10
10
52.00
58.00
79.00
THOMAPLAST® I - 2015 7
Laboratory Plastics - Bottles, Carboys and Accessories
Item
​
60969
60970
60971
Volume Outside Ø Ø neck
ml
mm
mm
500
1,000
2,000
75
90
120
45
54
54
Height
mm
Unit
piece
Price
EURO
165
210
245
5
2
2
59.00
43.00
59.00
Containers
THOMAPLAST®-Wide-Mouth Bottle made of PVC square
Product specification
•Square with screw closure. Transparent or brown-transparent (amber
translucent), physiologically safe.
​
THOMAPLAST®-Wide-Mouth Bottle made of FEP
Product specification
•Transparent, chemical-resistant, temperature-resistant (up to
+150 °C), sterilizable, shatterproof wide-mouth bottles made of tetrafluoroethylene hexafluoropropylene copolymers (FEP), with absolutely
leakproof screw cap.
•The material is insensitive to lowest temperatures.
•Preparations, e.g. vaccines, can be frozen up to temperatures of -105 °C.
​
Item
​
Item
​
10933
10934
10935
10936
Volume Outside Ø Ø neck
ml
mm
mm
125
250
500
1,000
45
58
70
90
28
32
38
42
Height
mm
Unit
piece
Price
EURO
115
125
155
200
1
1
1
1
82.00
126.00
159.00
225.00
THOMAPLAST®-Wide-Mouth Bottle made of PFA
Product specification
•Transparent wide-mouth bottle finished with absolutely smooth
surface, made of perfluroalkoxy of high temperature and chemical
resistance. The packing lip integrated into the screw cap guarantees
absolute tightness.
​
60973
60980
60974
60981
60975
60982
60976
60983
60977
60984
60978
60985
Volume
Design
LxW
Ø Height Unit Price
neck
mm mm piece EURO
ml
​
mm
50
50
100
100
200
200
300
300
500
500
1,000
1,000
transparent
amber
transparent
amber
transparent
amber
transparent
amber
transparent
amber
transparent
amber
38 x 38
38 x 38
46 x 46
46 x 46
59 x 59
59 x 59
66 x 66
66 x 66
80 x 80
80 x 80
95 x 95
95 x 95
23
23
31
31
41
41
41
41
54
54
69
69
60
60
72
72
87
87
95
95
108
108
144
144
10
10
10
10
10
10
6
6
5
5
5
5
21.00
24.00
25.00
27.00
34.00
35.00
30.00
33.00
29.00
31.00
36.00
39.00
THOMAPLAST®-Wide-Mouth Bottle made of HDPE square
Product specification
•Square, white, opaque, very robust (stable) wide-mouth jar made of
polyethylene (HDPE) with extra large mouth, separate internal seal as
well as leakproof screw closure.
​
Item
​
11979
11980
11981
11982
11983
11977
Volume Outside Ø Ø neck
ml
mm
mm
50
100
250
500
1,000
2,000
37
45
60
75
95
130
8 THOMAPLAST® I - 2015
17
24
33
37
49
60
Height
mm
Unit
piece
Price
EURO
85
120
150
180
215
245
1
1
1
1
1
1
73.00
92.00
121.00
151.00
205.00
300.00
Item
​
10835
10836
10837
Volume
ml
Dimensions
mm
Ø neck
mm
750
1,000
1,500
95 x 95
95 x 95
95 x 95
77
77
77
Height Unit
mm piece
130
155
215
5
5
5
Price
EURO
44.00
69.00
77.00
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
THOMAPLAST®-Wide-Mouth Bottle made of PP square
Product specification
•Very sturdy, dimensionally stable wide-mouth jar made of polypropylene with two recesses for safe handgrip, wide filling opening and
screw closure.
•However, the square, natural-coloured, translucent jar is not absolutely
liquid-tight.
•Particularly suited for storage of dry chemicals.
•Sterilizable up to +130 °C.
​
Item
​
10848
10849
Volume Outside Ø Ø neck
l
mm
mm
5
10
192
232
110
110
Height
mm
Unit
piece
Price
EURO
250
325
1
1
50.00
66.00
THOMAPLAST®-Wide-Mouth High-Shoulder Bottle
made of PP
Product specification
Item
​
10785
Volume Dimensions Ø neck
l
mm
mm
4.2
140 x 140
90
Height
mm
Unit
piece
Price
EURO
280
1
53.00
•Standard laboratory bottles made of polypropylene.
•Translucent (transparent) and with leakproof screw closure.
•Sterilizable.
​
THOMAPLAST®-Wide-Mouth Safety Bottle
made of LDPE - with internal seal
Product specification
•Round, transparent bottle made of LDPE with closure cap and lead
sealing device.
​
Item
​
40133
40134
40135
40136
Item
​
10874
10875
10876
10877
10878
10879
Volume Outside Ø Ø neck
ml
mm
mm
50
100
250
500
1,000
2,000
40
50
60
75
95
115
24
24
36
36
50
50
Height
mm
Unit
piece
Price
EURO
75
90
130
160
200
250
10
10
10
5
2
2
46.00
52.00
75.00
46.00
32.00
60.00
Volume Outside Ø Ø neck
ml
mm
mm
100
250
500
1,000
48
64
77
95
24
31
39
50
Height
mm
Unit
piece
Price
EURO
100
125
159
210
10
5
3
3
37.00
28.00
27.00
42.00
THOMAPLAST®-Wide-Mouth Conical Shoulder Bottle
made of PP - with srew closure
Product specification
•Transparent conical shoulder bottle with wide mouth and leakproof
screw closure, specified according to DIN 12036 and 12039 resp.,
made of polypropylene.
​
THOMAPLAST®-Wide-Mouth Safety Bottle
made of HDPE - octagonal
Product specification
•Octagonal, natural-coloured, translucent big-bellied bottle made of
HDPE with screw closure and lead sealing device.
​
THOMAPLAST® I - 2015 9
Laboratory Plastics - Bottles, Carboys and Accessories
Item
​
10812
10813
10814
10815
10816
Volume
Height
ml
Outside
Ø
mm
100
250
500
1,000
2,000
55
73
87
108
131
96
132
172
204
243
mm
External Unit Price
thread
​
piece EURO
GL32
GL45
GL45
GL63
GL63
10
10
5
3
2
49.00
62.00
44.00
48.00
39.00
THOMAPLAST®-Storage Bottle made of HDPE
Containers
Product specification
•The closure prevents vacuum generation while draining and has a
R 3/4“-thread.
​
Item
​
Unit
piece
Price
EURO
1
23.00
40075
THOMAPLAST®-Narrow-Neck Storage Bottle
made of LDPE - without cock
Product specification
Product specification
•Filling carboy made of polyethylene (HDPE) with bail handles, transparent.
•With or without connecting thread (pipe thread R 3/4”).
•No vacuum generation while draining, due to air vent screw closure.
•Air vent valve (accessory) allows attachment of a sterile filter or of
calcium chloride filter.
•With self-adhesive blue litre scale, the litre scale proved to be a useful
auxiliary for preparing chemical compositions.
•Optional accessories: closure cap item 40074 and spigot items
40047-48, 40073, 10746-10747 close absolutely tightly. Stripping of
the thread is not possible, the cock is always in a straight position.
•Natural-coloured cylindrical round carboy in particularly sturdy
industrial design made of LDPE with strong plastic handles on top of
the shoulder.
​
​
Item
​
11575
11576
Item
​
40065
40066
40067
40068
40069
40070
40072
Volume Outside
Ø
l
mm
5
5
10
10
25
25
60
170
170
210
210
275
275
345
Height
mm
Threaded
sleeve
​
Unit
Price
piece
EURO
350
350
445
445
580
580
826
without
with
without
with
without
with
with
1
1
1
1
1
1
1
56.00
68.00
61.00
87.00
111.00
123.00
221.00
Volume Outside Ø
Height Bail
Unit Price
Ø
neck
handle
l
mm
mm
mm
​
piece EURO
5
10
165
210
45
55
335
415
1
1
1
1
49.00
59.00
THOMAPLAST®-Narrow-Neck Storage Bottle
made of LDPE - with cock
Product specification
•Natural-coloured, translucent storage bottles with narrow neck, screw
closure, bail handles, and spigot made of HDPE.
•Spout-Ø: 11 mm, connecting thread: 3/4”.
•Spare spigot: item 10872
​
RCT®-Accessories: Screw Closure for Storage
Bottles - with drain function
Item
​
10871
62083
62085
62087
10 THOMAPLAST® I - 2015
Volume Outside Ø
Height Bail
Unit
Ø
neck
handle
l
mm
mm
mm
​
piece
5
10
25
50
165
210
275
365
47
55
55
55
335
420
540
660
1
1
2
2
1
1
1
1
Price
EURO
79.00
117.00
171.00
273.00
Laboratory Plastics - Bottles, Carboys and Accessories
THOMAPLAST®-Carboy (rectangular) made of LDPE without cock
Product specification
Containers
•Drain ball cock made of PP (ball seal made of PTFE, Seal made of
NBR), outside diameter: 12 mm, cock thread: R 1/2”.
•Bottles of 5 or 10 liters with rust-proof metal frame, all the rest with 2
plastic handles
​
•Natural-coloured rectangular carboy in particularly sturdy industrial
design made of LDPE with strong plastic handles on top of the shoulder.
​
Item
Item
Volume
​
l
Dimensions
LxWxH
mm
62078
62079
62080
11580
5
10
20
30
180 x 140 x 290
220 x 170 x 390
280 x 240 x 415
305 x 305 x 525
Ø
neck
mm
63
63
63
65
Bail
Unit
handle
​
piece
1
1
2
2
1
1
1
1
Price
​
11570
11571
11572
11573
EURO
54.00
90.00
151.00
223.00
THOMAPLAST®-Carboy (rectangular) made of LDPE
- with screwed ball cock
Volume Outside Ø
Height Bail
Unit
Ø
neck
handle
l
mm
mm
mm
​
piece
5
10
25
60
165
205
280
346
50
50
65
50
340
430
540
823
1
1
2
2
1
1
1
1
Price
EURO
180.00
184.00
225.00
360.00
THOMAPLAST®-Jerrycan made of HDPE - square
Product specification
•Rectangular with screw closure and lateral molded-in safety handgrip
​
Product specification
•Natural-coloured rectangular carboy made of LDPE in particularly sturdy industrial design with strong plastic handles on top of the shoulder.
•Screwed Ball cock made of PP (ball seal made of PTFE), drain cock
12 mm and thread R 1/2”.
​
Item
​
41020
41021
Item
Volume
​
l
Dimensions
LxWxH
mm
11566
11567
11568
11569
5
10
20
30
180 x 140 x 290
220 x 175 x 390
280 x 240 x 415
310 x 300 x 560
Ø
neck
mm
63
63
63
65
Bail
Unit
handle
​
piece
2
1
2
2
1
1
1
1
Price
EURO
177.00
215.00
271.00
320.00
THOMAPLAST®-Carboy (round) made of PP with drain ball cock
Product specification
•Natural-coloured round carboy made of polypropylene in particularly
sturdy industrial design with strong plastic handles.
Volume Dimensions Ø neck
l
mm
mm
2.3
4.4
135 x 135
142 x 142
69
109
Height
mm
Unit
piece
Price
EURO
192
263
3
3
69.00
87.00
THOMAPLAST®-Jerrycan made of HDPE
Product specification
•Wide-mouth jerrycan made of transparent HDPE with sturdy handle
and extremely wide filling opening (88 mm).
•The 5 l and 10 l containers have an additional air vent opening with
small spout.
•Connecting thread: Pipe thread 3/4” outside depending on type for
adapting the THOMAFLUID®-spigot (accessory).
•Screw plug and spigot close absolutely tightly. Stripping of the thread
is not possible, the cock is always in a straight position.
•The litre scale proved to be a useful auxiliary for preparing chemical
compositions.
•Optional accessories: litre scale items 40059-64, closure cap item
40074 and spigot items 40047-48, 40073, 10746-10747
​
THOMAPLAST® I - 2015 11
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
Item
Volume
​
l
Threaded
sleeve
​
40045
40046
5
5
without
with
Dimensions
LxWxH
mm
Unit
Price
piece
EURO
320 x 65 x 320
320 x 65 x 320
1
1
57.00
66.00
RCT®-Accessories: Closure Cap made of PVC
Product specification
Item
Volume
​
l
Dimensions
LxWxH
mm
40051
40052
40053
40054
40055
40056
40057
40058
5
5
10
10
20
20
30
30
290 x 130 x 290
290 x 130 x 290
310 x 150 x 400
310 x 150 x 400
380 x 175 x 490
380 x 175 x 490
370 x 250 x 490
370 x 250 x 490
Threaded
sleeve
​
Unit
Price
piece
EURO
without
with
without
with
without
with
without
with
1
1
1
1
1
1
1
1
55.00
66.00
68.00
94.00
104.00
135.00
143.00
166.00
​
40059
40060
40061
40062
40063
40064
​
Item
​
RCT®-Accessories: Litre Scale for Jerrycans
Item
​
•Closure Cap for jerrycans and carboys with external thread R 3/4“,
colour: grey
Internal thread
​
Unit
piece
Price
EURO
R 3/4“
1
9.00
Volume
l
Graduation
ml
Unit
piece
Price
EURO
40074
5
5
10
10
22
22
250
250
250
250
250
250
1
3
1
3
1
3
12.00
30.00
12.00
30.00
12.00
30.00
RCT®-Accessories: Tank Connection made of PP
Product specification
•Connection with cylindrical external thread „G“, complete with EPDMgaskets for simple screw mounting in tank walls
​
THOMAPLAST®-Jerrycan made of PP - stackable
Product specification
•Stackable jerrycans made of transparent polypropylene (PP) are thickwalled and place-saving at the same time. They can be placed both
horizontally and vertically.
•Connecting thread: pipe thread 3/4” depending on type for adapting
the THOMAFLUID®-spigot (accessory).
•The optional spigot closes absolutely tightly. Stripping of the thread is
not possible.
•With raised, indestructible litre scale.
•Optional accessories: closure cap item 40074 and spigot items
40047-48, 40073, 10746-10747
Item
​
14352
14353
14354
​
External
thread
​
d
D
L
B
Unit
Price
mm
mm
mm
mm
piece
EURO
G 1/2“
G 3/4“
G 1“
38
43
50
13.5
18
24.4
49
52
56
5.5
5.5
5.5
3
3
3
60.00
69.00
78.00
THOMAPLAST®-Wall Drying Rack made of PS
Product specification
•Robust construction, light gray. Seamlessly injection-molded in one
piece, with rounded edges and drain channel, thus easy to clean. Rack
with 72 pegs, length 100 mm, Ø 15 mm. Pegs snap in or out easily
when drying of larger flasks or cylinders. Rack with 2 hanging hooks at
the top and additional fixation at the bottom, incl. dowels, mounting kit,
and assembly instructions.
​
12 THOMAPLAST® I - 2015
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
Tubes, Jars and Boxes
THOMAPLAST®-Shipment Jar made of PS - with cover
Product specification
•Transparent tubes made of polystyrene (PS) with easily and tightly
closing cover made of polypropylene (PP).
​
Item
​
61300
61301
Dimensions
mm
Design
​
Price
EURO
450 x 630
95 x 6
72 pegs
replacement peg
239.00
19.00
THOMAPLAST®-Cell Culture Flask made of PS
Product specification
•The cell culture flasks are made of optically clear, biologically inert,
homogenous polystyrene (PS), while the closure caps are made of
orange-coloured polyethylene (PE). They guarantee absolute tightness
and thus increased cell growth.
•Temperature resistance up to max. +80 °C.
•The cell culture flask ensures optimal proliferation for anchorage
dependent cells, due to homogenous surface treatment.
•Each cell culture flask is tested separately under pressure.
•Each bottle lot is checked for sterility, non-toxicity, cell attachment, and
cell proliferation.
•The cell culture flasks are graduated, fitted with labeling surface and
feet for better stability.
•Sterile packaged.
Item
​
11892
61158
61160
61161
61162
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
1
3.5
6
10
16
13
15
18
18
23
15
30
36
52
60
50
50
50
50
50
35.00
35.00
35.00
40.00
40.00
THOMAPLAST®-Shipment Jar made of LDPE with cover
​
Product specification
•Translucent jar made of LDPE with well-closing cover.
​
Item
​
40437
404381
40439
40440
1
Culture area
cm²
Volume
ml
Unit
piece
Price
EURO
25
75
75
150
70
268
275
600
20
5
5
5
72.00
44.00
44.00
44.00
cell culture flask with straight neck
Item
​
11906
11907
11908
11909
11910
11911
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
5
12
18
28
50
70
20
24
24
24
33
33
25
35
52
85
70
105
20
20
15
10
10
5
58.00
80.00
90.00
75.00
90.00
60.00
THOMAPLAST® I - 2015 13
Laboratory Plastics - Tubes, Jars and Boxes
Containers
THOMAPLAST®-Shipment Jar made of LDPE - natural
Product specification
•Translucent, with well-closing cover and fastening strap, made of LDPE.
​
THOMAPLAST®-Sample Vial made of PFA with screw cap and flat bottom
Product specification
•The delivery consists of either two sample vials or ten sample vials
including rack.
Technical specification
•Temperature range: -196 to +250 °C
•Wall thickness of sample vial: 2 mm
•Height of cap, sample vial: 15 mm
•Dimensions of rack: 8.1 x 26.5 cm (W x L) for 10 sample vials
​
Item
​
Outside Ø
mm
Height
mm
Colour
​
Unit
piece
Price
EURO
8
15
16
18
20
22
25
30
30
32
50
30
44
130
32
72
52
75
nature
nature
nature
nature
white
nature
nature
nature
nature
50
30
20
30
20
30
20
20
20
45.00
48.00
50.00
48.00
46.00
48.00
52.00
62.00
68.00
60747
60749
11838
11840
118411
60750
60751
11844
11845
1
Item
​
ml
Dimensions of
sample vial ØxH
mm
72383
72382
72388
72384
72389
72385
72390
72386
72496
72498
7
7
15
15
22
22
30
30
60
60
21 x 33
21 x 33
29 x 37
29 x 37
29 x 53
29 x 53
36 x 70
36 x 70
29 x 133
29 x 133
made of PP
THOMAPLAST®-Shipment Jar made of PE/PP with screw closure
Product specification
•Very stable, liquid-tight design with screw closure made of the materials polyethylene and polypropylene.
​
Volume
Colour
Unit
Price
​
piece
EURO
nature
nature
nature
nature
nature
nature
nature
nature
nature
nature
2
10
2
10
2
10
2
10
2
10
62.00
167.00
82.00
243.00
92.00
318.00
97.00
318.00
160.00
580.00
THOMAPLAST®-Sample Vial made of PFA with screw cap and round bottom
Product specification
Item
​
11898
11899
Volume Outside
Ø
ml
mm
40
45
25
30
Height
Material
Unit
Price
mm
​
piece
EURO
120
98
PE (LDPE)
PP
50
50
170.00
150.00
​
THOMAPLAST®-Sample Vials made of PFA
General product specification
•Sample vial made of PFA with tight screw closure incorporating the
central hole (6.4 mm and 1/4“ resp.) with thread for the extremely
thick silicone-tylon-septum. A special rack made of black PE for
accommodation of ten sample vials as well as two code or I.D. cards
are included in the content of supply. Slots for the cards on the vials.
​
14 THOMAPLAST® I - 2015
•Sample vials made of PFA with a screw cap optimally closing due to
intermediate seal.
•Suitable as freezing vials; vials are stackable.
•Rack made of black PE.
•The delivery consists of either two sample vials or ten sample vials
including rack, code or I.D. cards are always included in the content
of supply.
Laboratory Plastics - Tubes, Jars and Boxes
Containers
Technical specification
Item
​
•Temperature range: -196 to +250 °C
•Wall thickness of sample vial: 2 mm
•Height of cap, sample vial: 14 mm
•Dimensions of rack: 6.9 x 17.4 cm (W x L) for 10 sample vials
Item
Volume
​
ml
Dimensions of
sample vial ØxH
mm
72394
72495
72395
72393
7
7
15
15
21 x 33
21 x 33
29 x 37
29 x 37
Colour
Unit
​
piece
EURO
nature
nature
nature
nature
2
10
2
10
67.00
185.00
95.00
254.00
62009
62010
11869
11870
11871
11872
62011
62012
11873
11874
62013
11875
11876
11877
11878
11879
Price
THOMAPLAST®-Specimen Jar made of PS - with cover
Product specification
•Glass-clear jars made of polystyrene (PS) with well-closing cover.
​
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
69
70
77
77
80
80
85
89
90
90
98
101
120
125
155
224
51
30
26
31
20
40
8
35
25
40
43
54
66
34
34
33
20
20
5
5
10
5
20
20
5
5
20
5
3
3
2
1
58.00
48.00
34.00
35.00
47.00
34.00
42.00
64.00
35.00
45.00
69.00
45.00
45.00
45.00
37.00
33.00
THOMAPLAST®-Specimen Jar made of PS with screw closure
Product specification
•Transparent, stable design with screw closure but not liquid-tight, ideal
for use as show glass.
​
Item
​
11849
11850
11851
11852
11853
62000
11855
11856
11857
62001
11858
11859
62002
62003
11860
11861
11862
11863
62004
62005
11864
11865
11866
62006
11867
11868
62007
62008
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
10
18
20
22
25
26
27
30
33
33
34
34
34
36
39
39
46
46
49
50
50
54
58
65
68
68
69
69
5
7
10
13
25
17.5
10
35
10
18
16
25
43
29
15
30
16
42
36
25
40
14
20
7
16
30
22
40
20
20
20
20
10
20
20
10
20
20
10
5
20
20
20
10
20
20
20
20
10
20
10
20
10
10
20
20
22.00
38.00
30.00
26.00
44.00
20.00
22.00
29.00
30.00
40.00
45.00
29.00
28.00
40.00
40.00
34.00
34.00
34.00
36.00
36.00
39.00
38.00
29.00
38.00
32.00
45.00
38.00
58.00
Item
​
11939
11940
11941
11942
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
60
95
120
150
48
48
48
48
52
74
90
105
25
25
20
20
80.00
85.00
74.00
82.00
THOMAPLAST®-Specimen Jar made of PP - with cover
Product specification
•Well closing cover
•Chemical-resistant and sterilizable up to +130 °C
​
THOMAPLAST® I - 2015 15
Laboratory Plastics - Tubes, Jars and Boxes
Item
​
61197
61198
61199
61200
Containers
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
15
25
50
100
30
32
40
50
30
38
45
60
20
20
20
10
40.00
48.00
58.00
37.00
Item
​
60209
60210
11985
11986
72497
60211
11987
72396
72397
72398
60212
11988
72399
60213
72400
72401
72402
72554
72403
72404
60214
72405
72406
60216
72407
72408
THOMAPLAST®-Specimen Jar made of LDPE with screw closure
Product specification
•Very sturdy design made of LDPE, with leakproof, easy-turnable screw
closure, colour: translucent.
​
Item
​
11900
11901
11902
11903
11904
11905
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
5
10
30
60
90
180
21
21
35
35
55
55
30
55
53
90
60
108
3
3
3
3
2
1
36.00
39.00
45.00
54.00
44.00
27.00
Volume Outside
Ø
ml
mm
7
30
30
60
60
60
90
90
120
120
120
180
180
240
240
240
300
350
360
480
500
500
500
1,000
1,000
1,000
22
29
38
38
43
50
54
63
50
50
66
54
73
66
90
90
72
100
83
108
85
114
114
107
147
147
Height
Colour
Unit
Price
mm
​
piece
EURO
37
69
54
90
49
47
62
49
66
66
53
112
66
95
66
66
66
50
85
85
120
84
84
151
105
105
nature
nature
nature
nature
nature
nature
nature
nature
nature
black
nature
nature
nature
nature
nature
black
nature
nature
nature
nature
nature
nature
black
nature
nature
black
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
39.00
44.00
48.00
58.00
59.00
88.00
64.00
69.00
98.00
98.00
113.00
79.00
103.00
164.00
125.00
125.00
141.00
185.00
154.00
215.00
280.00
246.00
246.00
408.00
368.00
368.00
THOMAPLAST®-Specimen Box made of PS with cover
​
THOMAPLAST®-Specimen Jar made of PFA with screw cap
Product specification
•Specimen jars made of PFA with a screw cap optimally closing due to
intermediate seal.
•The jars are manufactured seamlessly, translucent (transparent) and
black resp., stackable, and freezable.
•The jar lid can be labeled with felt-tip pen.
Technical specification
•Temperature range: -196 to +250 °C
•Wall thickness, specimen jar: 2.5 mm
​
Item
​
62015
62016
62017
62018
62019
62020
62021
62022
62023
62024
62025
62026
16 THOMAPLAST® I - 2015
Volume
ml
Dimensions LxWxH
mm
Unit
piece
Price
EURO
23
14
24
35
51
75
110
52
150
108
230
158
47 x 45 x 11
50 x 30 x 9
50 x 30 x 16
57 x 36 x 17
57 x 36 x 25
57 x 47 x 28
60 x 51 x 26
73 x 42 x 17
75 x 75 x 27
80 x 50 x 27
95 x 68 x 35
99 x 59 x 27
20
20
20
20
20
20
20
20
20
20
20
20
24.00
24.00
24.00
24.00
28.00
38.00
46.00
34.00
44.00
44.00
58.00
58.00
Laboratory Plastics - Tubes, Jars and Boxes
Item
​
62027
62028
62029
62030
62031
62032
Containers
Volume
ml
Dimensions LxWxH
mm
Unit
piece
Price
EURO
Item
​
400
125
160
255
3,150
2,300
102 x 85 x 47
107 x 53 x 22
107 x 75 x 20
115 x 75 x 30
190 x 145 x 115
198 x 154 x 75
20
20
20
20
2
2
76.00
48.00
52.00
74.00
43.00
26.00
11930
11931
11932
11933
11934
11935
61190
61191
11936
61192
11937
61194
61195
11938
THOMAPLAST®-Packaging Jar made of PP - with cover
Product specification
•White, well-closing, shatterproof jar made of polypropylene (PP).
•Cover can be labeled.
​
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
12
25
35
60
75
125
150
250
250
500
500
800
1,000
1,000
29
34
38
45
45
56
65
65
73
90
95
90
100
113
30
40
48
55
65
67
50
82
78
80
91
125
130
128
25
25
25
25
25
25
8
6
20
5
10
3
3
5
35.00
50.00
60.00
65.00
70.00
95.00
44.00
39.00
92.00
41.00
82.00
30.00
36.00
62.00
THOMAPLAST®-Packaging Jar made of TPX with screw closure
Product specification
Item
​
61227
61228
61229
61230
61231
61232
61233
61235
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
10
20
30
50
75
100
150
250
40
40
55
55
55
70
70
95
20
30
25
40
50
40
60
60
25
25
25
25
25
25
25
25
37.00
65.00
65.00
70.00
75.00
115.00
125.00
140.00
THOMAPLAST®-Packaging Jar made of PP with screw closure
•Glass-clear, shatterproof jar in sturdy design,
made of TPX (polymethylpentene)
•Lid made of polypropylene (PP)
•The jar is chemical-resistant to a great degree and
sterilizable up to +130 °C
​
Item
​
11634
11635
11636
11637
11638
Product specification
•White, extremely stable but light jar made of polypropylene with easyturnable screw closure (not liquid-tight).
•Physiologically safe: for use with powder, granulate, pastes etc.
•Outstandingly chemical-resistant and sterilizable up to +121 °C.
​
Volume
ml
Outside Ø
mm
Unit
piece
Price
EURO
60
125
250
500
1,000
55
70
70
120
120
5
3
3
1
1
39.00
39.00
48.00
24.00
29.00
THOMAPLAST®-Packaging Jar made of HDPE
​
THOMAPLAST® I - 2015 17
Laboratory Plastics - Tubes, Jars and Boxes
Containers
THOMAPLAST®-Storage Jar made of LDPE
Product specification
•White, very stable, cylindrical jar made of polyethylene.
•The cover must be ordered separately in different colors.
Item
​
11916
11917
11918
11919
11920
11921
Volume
ml
Outside Ø
mm
Height
mm
250
500
750
1,000
1,300
1,500
95
95
95
95
100
100
60
95
135
160
185
200
Product specification
Unit Price Price
piece EURO EURO
10
10
10
10
10
10
50.00
56.00
60.00
61.00
69.00
82.00
•Translucent, shatterproof jar made of LDPE with absolutely leakproof lid.
•Resistant to chemicals and temperature up to +100 °C.
​
50.00
56.00
60.00
61.00
69.00
82.00
RCT®-Accessories: Cover for Packaging Jars unicolour
Item
​
Produkt specifikation
•Covers with sealing lips to Packaging Jars 11916-11921.
61172
61173
61174
61175
61176
​
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
200
400
700
1,000
2,000
90
110
110
125
150
40
50
90
110
140
5
5
5
5
5
43.00
49.00
59.00
57.00
67.00
THOMAPLAST®-Storage Jar made of PP with screw closure
Product specification
Item
​
11893
11894
11895
11896
11897
11880
11881
11882
Suitable for
​
Colour
​
Unit
piece
Price
EURO
250 / 500 / 750 / 1.000 ml
250 / 500 / 750 / 1.000 ml
250 / 500 / 750 / 1.000 ml
250 / 500 / 750 / 1.000 ml
250 / 500 / 750 / 1.000 ml
1.300 / 1.500 ml
1.300 / 1.500 ml
1.300 / 1.500 ml
white
black
red
blue
yellow
white
red
blue
1
1
1
1
1
1
1
1
1.00
1.00
1.00
1.00
1.00
2.00
2.00
2.00
THOMAPLAST®-Storage Jar made of PS - with cover
Product specification
•Transparent jar made of PP (polypropylene) in sturdy design
•Lid made of HDPE (polyethylene)
​
Item
​
11970
11971
11972
•Transparent jar with cover made of polystyrene (PS).
​
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
250
500
1,000
104
104
126
50
100
126
3
3
1
27.00
36.00
22.00
THOMAPLAST®-Storage Box made of HDPE
​
Item
​
11968
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
950
105
135
5
31.00
18 THOMAPLAST® I - 2015
Laboratory Plastics - Tubes, Jars and Boxes
Containers
RCT®-Accessories: Cover made of PS
for Partitioned Inserts - transparent
Product specification
•Unbreakable, with leakproof snap-on lid
•Also usable as storage jar for the refrigerator or as provision jar
Item
​
61256
61257
61258
61259
61260
61261
61262
​
Volume
l
Dimensions
mm
Height
mm
Unit
piece
Price
EURO
0.5
1
1
1.5
2
3.2
2
100 x 100
100 x 100
200 x 100
200 x 100
200 x 200
200 x 200
250 x 100
65
130
65
95
65
95
95
5
5
4
3
2
2
2
34.00
41.00
46.00
39.00
35.00
37.00
35.00
THOMAPLAST®-Selection and Storage Box made of PS
Item
​
Product specification
61249
61250
61251
61252
61253
61254
•By use of partitions the storage boxes (size 330 x 220 mm) can be
arranged in many variants.
•Glass-clear, with hinged lid, without partition.
​
Dimensions
mm
For item
​
Unit
piece
Price
EURO
54 x 54
108 x 54
108 x 108
162 x 108
215 x 108
322 x 108
61185, 61237, 61244
61238, 61245
61239, 61246
61240, 61247
61241
61242
10
10
7
5
5
4
25.00
29.00
35.00
23.00
26.00
32.00
THOMAPLAST®-Conway Diffusion Cell made of PP
Product specification
•A knob on the cover is used to raise it, and the circular moat of the cell
receives the cover, sealing off the outermost chamber.
Technical specification
•Depth: moat: 6 mm, central chamber: 9 mm, Inner chamber: 6 mm
​
Item
​
61178
12066
61180
61181
61182
61183
Dimensions
mm
Height
mm
Unit
piece
Price
EURO
140 x 85
170 x 105
250 x 170
330 x 220
330 x 220
330 x 220
30
30
45
30
50
70
1
1
1
1
1
1
15.00
25.00
47.00
58.00
60.00
69.00
THOMAPLAST®-Insert made of PS
Item
Product specification
•For selection- and storage boxes item 61178 - 61183
with the same height.
​
968382
​
Item
​
61185
61237
61238
61239
61240
61241
61242
61244
61245
61246
61247
Dimensions
mm
Height
mm
Colour
​
Unit
piece
Price
EURO
54 x 54
54 x 54
108 x 54
108 x 108
162 x 108
215 x 108
322 x 108
54 x 54
108 x 54
108 x 108
162 x 108
23
45
45
45
45
45
45
62
62
62
62
red
red
yellow
blue
green
light grey
grey
red
yellow
blue
green
10
10
10
7
5
4
3
10
7
5
4
31.00
36.00
46.00
56.00
46.00
48.00
48.00
46.00
56.00
46.00
48.00
Outside
Ø
mm
Ø inner
chamber
mm
Ø ring
chamber
mm
Unit
Price
piece
EURO
59
12.5
34
3
27.00
THOMAPLAST®-Weigh Jar made of PP
​
THOMAPLAST® I - 2015 19
Laboratory Plastics - Tubes, Jars and Boxes
Containers
Product specification
Dishes and Crucibles
•Transparent, with air-tightly closing knobbed lid
•Steam autoclavable at +120 °C
Item
​
96570
96572
60736
60737
60738
60739
60740
60741
60742
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
THOMAPLAST®-Cell Culture Petri Dish made of PS
10
20
30
25
65
50
65
200
400
32
38
30
40
40
50
60
60
70
25
25
50
30
60
30
35
90
120
12
12
5
5
5
5
5
3
3
60.00
60.00
36.00
41.00
41.00
45.00
49.00
30.00
33.00
•Cell culture petri dishes are made of polystyrene (PS).
•Special treatment of the inner surface promotes growth of anchoragedependent cells.
•Each dish is ventilated threefold to allow effective gas exchange.
•Stacking rings avoid scratches on the dishes and allow to stack the
dishes in the incubation room.
•The dishes are sterile packaged.
Product specification
​
THOMAPLAST®-Transfer Reaction Vessel
made of PFA for Fluids
Product specification
•Transfer reaction vessel made of PFA with screw cap containing one
or more fittings for liquid transfer. The lid with all screw-in fittings
is made in one piece. The transfer tubing (1/4”) is adapted with a
clamping nut made of PFA.
​
Item
​
40457
40458
40459
40460
404611
404621
40463
40464
Item
​
72410
72411
72412
72413
72414
72415
72416
72417
72418
72419
72420
72421
72422
72423
72424
72425
72426
Volume Number Outside
of fittings
Ø
ml
​
mm
7
15
23
30
120
120
180
240
240
120
180
240
300
360
500
500
1,000
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
24
33
33
33
70
70
70
70
70
70
70
70
89
89
89
89
110
Colour
Unit
Price
​
piece
EURO
nature
nature
nature
nature
nature
black
nature
nature
black
nature
nature
nature
nature
nature
nature
black
black
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
44.00
54.00
59.00
64.00
85.00
116.00
121.00
139.00
139.00
139.00
144.00
162.00
172.00
187.00
187.00
236.00
302.00
1
Outside
Ø
mm
Height
mm
Culture
area
cm²
35
35
60
60
60
60
100
100
39
39
58
58
58
58
94
94
Unit
Price
piece
EURO
10
10
15
15
15
15
20
20
9
9
21
21
21
21
55
55
100
300
100
300
100
300
100
300
80.00
204.00
100.00
255.00
90.00
245.00
120.00
490.00
with counting grid
THOMAPLAST®-Petri Dish made of PS
Product specification
•Sterile packages
•Usable up to +80 °C
•Not suited for solvents
​
Item
​
61072
61073
61074
20 THOMAPLAST® I - 2015
Inside
Ø
mm
Outside Ø
mm
Height
mm
Design
​
Unit
piece
Price
EURO
60
92
140
16
16
20.6
without cams
with cams
without cams
100
100
100
60.00
70.00
70.00
Laboratory Plastics - Dishes and Crucibles
Containers
THOMAPLAST®-Petri Dish made of PFA
Item
​
Product specification
Volume
ml
Unit
piece
Price
EURO
100
2
74.00
72553
•Dishes stackable, coated bottom providing smooth surface
​
THOMAPLAST®-Evaporating Dish made of PTFE high, with spout
Product specification
•High, cylindrical dish made of PTFE with flat bottom and spout, inner
surface non-porous and smooth
•Chemical-resistant except to alkali metals; free of leachable components and biocompatible
•Temperature loadable from -200 to +260 °C, sterilizable with all
commonly used methods
​
Item
​
72551
72552
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
50
100
51
102
10
15
2
2
48.00
108.00
THOMAPLAST®-Weighing Dish made of PS
Product specification
•For quick and clean weighing of powder and liquids
​
Item
​
47906
47907
47908
47909
Item
​
61077
Dimensions LxWxH
mm
Unit
piece
Price
EURO
40 x 40 x 7
25
15.00
THOMAPLAST®-Evaporating Dish made of PFA with spout
Volume
ml
Ø top
mm
Height
mm
Unit
piece
Price
EURO
25
50
100
250
38
49
64
97
37
41
54
62
1
1
1
1
25.00
42.00
48.00
92.00
THOMAPLAST®-Evaporating Dish made of PTFE with spout
Product specification
•Very sturdy, stable evaporation dish with small spout, in slightly conical
design, flat bottom and smooth surface, made of polytetrafluoroethylene (PTFE).
•Resistant to chemicals and temperature up to +260 °C.
​
Product specification
•Dish with spout
•Temperature loadable from -200 to +260 °C, sterilizable with all
commonly used methods, Weight: approx. 55 g
​
Item
​
11684
11685
11687
11686
Volume
ml
Ø top
mm
Height
mm
Unit
piece
Price
EURO
25
50
100
250
38
49
64
125
37
41
54
36
1
1
1
1
51.00
59.00
66.00
88.00
THOMAPLAST® I - 2015 21
Laboratory Plastics - Dishes and Crucibles
Containers
THOMAPLAST®-PTFE Evaporating Dish flat, without Spout
Product specification
•Flat dish made of white polytetrafluoroethylene (PTFE)
•Resistant to chemicals and temperature up to +260 °C
​
Item
​
11688
11689
11690
Item
​
11691
11692
11693
11694
11695
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
25
50
100
180
350
40
65
80
80
100
25
23
28
45
55
1
1
1
1
1
34.00
35.00
45.00
58.00
101.00
THOMAPLAST -Crystallization Dish made of PTFE
®
Product specification
Volume
ml
Ø top
mm
Height
mm
Unit
piece
Price
EURO
5
25
75
25
45
55
18
30
44
1
1
1
21.00
32.00
44.00
Measuring Beakers and Measuring Flasks
THOMAPLAST®-Beaker made of PMP
Product specification
•Glass-clear beaker according to DIN 12331 (glass) / ISO 7056 with red
imprinted graduation.
•Made of biocompatible, non-leachable polymethylpentene (PMP).
•Shatterproof and temperature-resistant to +160 °C.
​
•Flat, straight-side dish made of PTFE with flat bottom, inner surface
non-porous and smooth.
•Chemical-resistant except to alkali metals; free of leachable components and biocompatible.
•Temperature loadable from -200 to +260 °C, sterilizable with all
commonly used methods.
​
Item
​
Item
​
47911
47912
47913
Volume
ml
Ø top
mm
Height
mm
Unit
piece
Price
EURO
50
100
250
66
80
100
25
29
56
1
1
1
34.00
56.00
80.00
THOMAPLAST®-Crucible made of PTFE
Product specification
•Crucible in slightly rounded, stable design with absolutely flat bottom
and smooth surface, made of polytetrafluoroethylene (PTFE).
•Absolutely highest resistance to all kind of inorganic and organic
compounds. Temperature resistant up to +250 °C.
​
22 THOMAPLAST® I - 2015
40528
40529
40530
40531
40532
40533
40534
40535
40536
40537
40538
40539
40540
Volume Outside
Ø
ml
mm
10
25
50
100
150
250
400
600
800
1,000
2,000
3,000
5,000
25
31
40
49
56
68
77
91
98
102
133
174
185
Height Graduation
Unit
Price
mm
ml
piece
EURO
35
47
60
70
80
94
109
125
136
149
183
214
248
2
5
10
20
20
50
50
100
100
100
200
200
500
6
6
6
6
6
3
3
3
3
3
3
1
1
18.00
21.00
27.00
33.00
39.00
24.00
30.00
36.00
45.00
51.00
66.00
49.00
61.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks
THOMAPLAST®-Beaker made of PP
Item
​
Product specification
41027
41028
41029
41030
•Transparent, with coloured graduation
•Autoclavable at +121 °C
•Very good chemical resistance
​
Containers
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
250
400
600
1,000
67
77
91
105
96
109
125
143
5
10
10
50
1
1
1
1
Price
EURO
38.00
54.00
67.00
95.00
THOMAPLAST®-Beaker made of PFA for Hot Plates
Application area
•Digestion of samples and dissolving of substances
•Etching tests in metallurgy
•Reaction processes with hydrogen fluoride (HF)
•Use of very reactive catalysts
•Preparation of biologics such as sensitive cell cultures in which the
binding or absorption of proteins poses a problem
Item
​
60600
60601
60602
60603
60604
60605
60606
60607
60608
60609
60610
60611
60612
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
10
25
50
100
150
250
400
600
800
1,000
2,000
3,000
5,000
25
31
40
49
56
68
77
91
98
102
133
174
185
35
47
60
70
80
94
109
125
136
149
183
214
248
2
5
10
20
20
50
50
100
100
100
200
200
500
6
6
6
6
6
6
3
3
3
3
3
1
1
Price
EURO
15.00
18.00
21.00
24.00
27.00
30.00
21.00
24.00
27.00
30.00
45.00
29.00
37.00
Product specification
•Beakers made of PFA (perfluoroalkoxy) with beaker bottoms made of
graphite which is resistant to high temperatures and transmits the
heat to the PFA material.
•The fluid only contacts PFA.
•The hot plate beakers withstand highest heating temperatures without
any problems, even when used with highly active or etching solutions.
•The beakers are absolutely chemical-resistant and unbreakable.
Contamination due to leakage is not possible.
•The hot plate temperature should not exceed +275 °C.
•Naked flame as heat source is prohibited in any case.
•Substances must never be evaporated totally (to dryness).
​
THOMAPLAST®-Beaker made of ECTFE
Product specification
•Laboratory beakers made of chemically inert ECTFE (ethylene-trifluorochloroethylene-copolymers), transparent with imprinted black scale,
in laboratory-oriented sizes from 25 to 1000 ml.
•Antiadhesive, non-porous surface.
•Physiologically safe and biocompatible.
•Temperature resistant from -100 to +150 °C.
•Chemically and steam sterilizable.
Item
​
11709
11710
​
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
250
400
75
85
94
112
1
1
112.00
176.00
THOMAPLAST®-Tapered Measuring Beaker
made of TPX
​
Item
​
41024
41025
41026
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
25
50
100
32
39
50
50
59
72
2
5
5
3
3
2
Price
EURO
39.00
51.00
44.00
THOMAPLAST® I - 2015 23
Laboratory Plastics - Measuring Beakers and Measuring Flasks
Product specification
•Transparent, shatterproof measuring beaker made of methylpentene
polymers (TPX).
•Fitted with very large foot and easy-to-read engraved scale.
•Very good resistance to chemicals, but not suitable for solvents, sterilizable.
•Suited for temperatures up to +130 °C.
Item
​
11728
11729
11730
11731
Volume
ml
Graduation
ml
Unit
piece
Price
EURO
100
250
500
1,000
2
5
10
20
2
1
1
1
35.00
27.00
33.00
56.00
Item
​
11726
11727
Containers
Volume
Height
ml
mm
Graduation
ml
1,000
2,000
167
212
10
20
Unit
Price
Price
piece EURO EURO
3
3
30.00 30.00
42.00 42.00
THOMAPLAST®-Beaker with Handle made of PP cylindrical, high
Product specification
•With handle and spout; graduated, transparent
​
THOMAPLAST®-Beaker with Handle made of SAN transparent
Product specification
•Glass-clear, tall measuring beaker made of styrene acrylonitrile (SAN)
with pointed triangular spout and easy-to-read engraved scale. Not
suited for solvents.
​
Item
​
60613
60614
60615
60616
60617
60618
Item
​
11732
11733
11734
11735
11736
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
250
500
1,000
2,000
3,000
70
91
116
150
170
120
133
170
215
242
5
10
10
20
50
6
6
3
2
1
Price
EURO
30.00
39.00
30.00
37.00
25.00
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
250
500
1,000
2,000
3,000
5,000
70
91
116
150
170
210
120
133
170
215
242
270
5
10
10
20
100
100
6
6
3
3
1
1
Price
EURO
30.00
30.00
21.00
42.00
19.00
25.00
THOMAPLAST®-Scoop Beaker made of PP
Product specification
•Particularly sturdy, natural-coloured scoop beaker with broad handle for
safe drawing of fluids and bulk material, made of polypropylene (PP).
​
THOMAPLAST®-Beaker with Handle made of PP conical
Product specification
•Very sturdy, hot water-resistant beaker with handle made of polypropylene (PP) with flat triangular spout and printed scale, transparent
and of conical shape (stackable).
​
Item
​
11741
24 THOMAPLAST® I - 2015
Volume
ml
Unit
piece
Price
EURO
1,500
1
20.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks
THOMAPLAST®-Measuring Cylinder made of SAN short
Containers
THOMAPLAST®-Measuring Cylinder made of PP
Product specification
•Transparent, tall shape, graduated (according to DIN 12680)
Product specification
​
•Transparent (glass-clear), short measuring cylinder with large foot,
made of styrene acrylonitrile (SAN).
•Easy-to-read scale.
•Not suitable for strong acids and solvents.
​
Item
​
Item
​
11719
11720
11721
11722
11723
11724
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
25
50
100
250
500
1,000
25
30
40
50
70
80
120
140
160
190
220
285
0.5
1
2
5
10
20
6
6
6
3
3
1
60592
60593
60594
60595
60596
60597
60598
60599
Price
EURO
30.00
42.00
45.00
39.00
48.00
22.00
THOMAPLAST®-Measuring Cylinder made of SAN tall
Product specification
•Transparent (glass-clear), tall measuring cylinder with large hexagonal
foot, made of styrene acrylonitrile (SAN).
•Easy-to-read scale.
•Temperature resistant from -40 to +70 °C.
•Sterilizable, but not autoclavable.
•According to Class B DIN 12681 / ISO 6706.
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
10
25
50
100
250
500
1,000
2,000
15
22
27
33
44
58
69
97
145
170
200
250
315
360
440
482
0.2
0.5
1
1
2
5
10
20
6
6
6
6
3
3
3
1
Price
EURO
30.00
39.00
42.00
45.00
39.00
48.00
69.00
39.00
THOMAPLAST®-Measuring Flask made of TPX
Product specification
•Measuring flask made of glass-clear TPX (PMP, polymethylpentene).
•Design with narrow neck, NS-stopper (standard ground joint stopper)
made of PP and ring mark.
•Accuracy: Class B, adjusted up to +20 °C.
​
​
Item
​
Item
​
11711
11712
11713
11714
11715
11716
11717
11718
Volume Outside Ø Height Graduation Unit
ml
mm
mm
ml
piece
10
25
50
100
250
500
1,000
2,000
16
21
28
34
47
61
76
97
140
169
199
260
315
350
415
482
0.2
0.5
1
1
2
5
10
20
6
6
6
3
3
2
1
1
Price
EURO
36.00
39.00
48.00
36.00
54.00
47.00
29.00
60.00
40541
40542
40543
40544
40545
40546
Volume
ml
25
50
100
250
500
1,000
Height Size (NS) Tolerance Unit
mm
​
mm
piece
115
150
180
235
270
310
10/19
12/21
14/23
19/26
19/26
24/29
±0.08
±0.12
±0.20
±0.30
±0.50
±0.80
3
3
3
2
2
1
Price
EURO
39.00
45.00
51.00
41.00
43.00
23.00
THOMAPLAST® I - 2015 25
Laboratory Plastics - Measuring Beakers and Measuring Flasks
Containers
THOMAPLAST®-Measuring Flask made of PP
THOMAPLAST®-Erlenmeyer Flask made of PC
Product specification
Product specification
•Measuring flask made of highly transparent PP
•Design with narrow neck, NS-stopper (standard ground joint stopper)
made of PP and ring mark.
•Tolerances class B according to DIN EN ISO 1042. Exposure to
temperatures above +60 °C may effect accuracy. Cleaning up to max.
+60 °C is recommended.
•Flask made of polycarbonate (PC), glass-clear (transparent) in particularly
sturdy design with reading scale.
•Resistant to chemicals and temperature up to approximately +130 °C.
​
​
Item
​
Item
​
60624
60625
60626
60627
Volume
ml
50
100
250
500
Height Size (NS) Tolerance Unit
mm
​
mm
piece
150
180
235
270
12/21
14/23
19/26
19/26
±0.12
±0.20
±0.30
±0.50
3
3
3
3
11655
11656
11657
11658
11659
Price
EURO
39.00
42.00
51.00
54.00
THOMAPLAST®-Measuring Flask made of PFA
Volume
ml
Unit
piece
Price
EURO
50
125
250
500
1,000
2
1
1
1
1
35.00
22.00
30.00
44.00
65.00
THOMAPLAST®-Erlenmeyer Flask made of PP
Product specification
Product specification
•Flask, translucent, in sturdy, stable design, chemical- and temperatureresistant up to approx. +130 °C.
​
•Exact metering of highly pure, bioactive or aggressive materials.
•Highly transparent measuring flask, individually calibrated ring mark
according to DIN 12664, Class B.
•Made of highly chemical-resistant PFA (perfluoroalkoxy polymer) with
standard thread and tight-closing screw cap made of PFA, which
protects against contamination.
•Sterilizable with all commonly used methods, temperature-resistant
from -200 to +260 °C.
Item
​
61336
61337
61338
61339
61341
​
Volume
ml
Size (NS)
​
Unit
piece
Price
EURO
25
50
125
250
1,000
14.5
14.5
14.5
19
29
3
3
3
2
1
39.00
39.00
45.00
56.00
37.00
THOMAPLAST®-Erlenmeyer Flask made of PP with screw cap, light
Product specification
•Light design.
•Erlenmeyer flask made of highly transparent polypropylene (PP).
•Wide-neck design with thread and screw cap.
​
Item
Volume
Height
​
ml
mm
12067
47846
47847
47848
47849
25
50
100
250
500
115
150
180
235
270
26 THOMAPLAST® I - 2015
External Tolerance Unit
thread
​
mm
piece
GL18
GL18
GL18
GL25
GL25
±0.04
±0.06
±0.10
±0.15
±0.25
1
1
1
1
1
Price
EURO
139.00
149.00
185.00
231.00
251.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks
Item
​
40523
40524
40525
40526
40527
Volume
ml
Unit
piece
Price
EURO
50
100
250
500
1,000
3
3
3
2
1
30.00
33.00
42.00
33.00
27.00
Containers
Funnels and Accessories
THOMAPLAST®-Funnel made of PP
Product specification
•Funnel made of polypropylene (PP), natural-coloured
​
THOMAPLAST®-Erlenmeyer Flask made of PTFE
Product specification
•With neck, formed as standard ground joint socket
•Suitable for vacuum
​
Item
​
Item
​
12025
12026
94591
12027
Volume Ø bottom Height Size (NS) Unit
ml
mm
mm
​
piece
50
100
250
500
54
63
85
107
86
128
144
190
19/26
19/26
29/32
29/32
1
1
1
1
60645
60646
60647
60648
60649
60650
60651
606521
606531
60654
Price
EURO
121.00
156.00
278.00
381.00
1
Volume
Ø top
Height
Unit
mm
Ø outlet
outside
mm
ml
5
12
30
80
220
340
750
1,600
3,800
10,000
Price
mm
piece
EURO
30
40
50
75
100
120
150
220
250
320
5
5
9
10
13
14
17
22
30
45
47
65
85
110
155
180
220
200
260
460
6
6
6
3
3
3
3
1
1
1
21.00
21.00
21.00
12.00
15.00
15.00
18.00
17.00
19.00
36.00
with strainer
THOMAPLAST®-Round-Bottom Flask with Standard
Ground-Glass Joint made of PFA
RCT®-Accessories: Aluminium Strainer for Funnels
Product specification
Product specification
•Temperature-loadable from -200 to +250 °C.
•Only relatively suitable for vacuum, e.g. at 30 mbar at +50 °C.
•Fitting filters item 60652 to 60653, replaceable
​
​
Item
​
606551
Thickness
mm
Unit
piece
Price
EURO
0.22
5
16.00
THOMAPLAST®-Funnel made of PP - long stem
Product specification
•Analytical funnel made of polypropylene (PP) with long, narrow stem
​
Item
​
479171
11976
120301
Volume Outside Ø Height Size (NS) Unit
ml
mm
mm
​
piece
100
250
500
65
88
107
117
148
177
29/32
29/32
29/32
1
1
1
Price
EURO
88.00
101.00
140.00
THOMAPLAST® I - 2015 27
Laboratory Plastics - Funnels and Accessories
Item
Ø top
mm
Length
stem
mm
Ø outlet
inside
mm
Ø outlet
outside
mm
​
11753
11754
11755
11756
11757
11758
25
35
50
60
80
100
40
40
50
150
150
150
2
3.5
4
4
4
4
4
5
6
8
8
8
Containers
Price
THOMAPLAST®-Funnel made of PTFE - conical
piece
EURO
Product specification
5
5
5
2
2
2
19.00
24.00
27.00
36.00
40.00
45.00
Unit
•Chemical-resistant except to alkali metals; free of leachable components
and biocompatible.
•Temperature loadable from -200 to +260 °C, sterilizable with all
commonly used methods.
​
THOMAPLAST®-Funnel made of PP - short stem
Product specification
•Stable laboratory funnel made of natural-coloured polypropylene (PP)
​
Item
Item
​
11748
11749
11750
11751
11752
Ø top
mm
Ø outlet outside
mm
Unit
piece
Price
EURO
50
75
100
120
160
9
10
11
14
17
10
10
6
5
3
28.00
37.00
36.00
39.00
30.00
THOMAPLAST®-Thistle Tube made of PP
Product specification
​
Ø
top
mm
Ø outlet
outside
mm
Length
stem
mm
Unit
Price
piece
EURO
12033
12034
12035
94593
340026
340027
18
30
50
70
100
150
4
6
7
10
14
16
12
37
45
74
90
120
1
1
1
1
1
1
39.00
44.00
50.00
136.00
136.00
216.00
THOMAPLAST®-High-Speed Funnel made of TPX
Product specification
•For rapid filtration without vacuum.
•Outstandingly suited for geological, metallurgic, and gravimetric soil
analyses.
•Internal helicoid ribs prevent sticking of filter paper.
•TPX (polymethylpentene) is resistant to hot, caustic and volatile matters.
•Autoclavable and temperature-resistant up to +177 °C.
​
•Bell-shaped upper part
•Excellent chemical resistance
•Stands steam sterilization up to +121 °C
​
Item
Item
​
60436
Ø
top
mm
Ø
flare
mm
Length
stem
mm
Unit
Price
piece
EURO
27
41
254
12
54.00
28 THOMAPLAST® I - 2015
​
Ø
top
mm
Length
stem
mm
Ø outlet
inside
mm
Ø outlet
outside
mm
Unit
Price
piece
EURO
60419
60420
60421
60422
60423
60424
50
70
70
100
140
200
150
150
70
110
130
160
3
3
3
7
10
20
7.5
7.5
10
10
16
26
2
2
1
2
1
1
16.00
18.00
11.00
21.00
23.00
29.00
Laboratory Plastics - Funnels and Accessories
Containers
THOMAPLAST®-Powder Funnel made of PP
Product specification
•Stable laboratory funnel made of natural-coloured polypropylene (PP)
​
Item
​
Item
Ø outlet
outside
mm
Height
Unit
​
Ø
top
mm
mm
piece
EURO
60655
60656
60657
60658
60659
65
80
100
120
150
18
24
26
30
32
68
75
94
110
138
5
5
3
3
2
15.00
17.00
18.00
18.00
16.00
11646
11647
11648
11649
Price
Volume
ml
Unit
piece
Price
EURO
125
250
500
1,000
1
1
1
1
197.00
220.00
324.00
378.00
RCT®-Accessories: Separatory Funnel Holder
made of PP
Product specification
•With clamp for support rods Ø 8-14 mm
​
THOMAPLAST®-Separatory Funnel made of PP
Product specification
•Leakproof screw closure made of PP.
•Self-lubricating cock and plug made of PTFE.
•Highly transparent, phase separation is clearly recognizable.
•Autoclavable except cock and plug.
•Resistant to nearly all chemicals including hydrofluoric acid.
​
Item
​
60831
Suitable for
​
Unit
piece
Price
EURO
125 - 500 ml funnels
1
23.00
Test Tubes and Centrifuge Tubes
Item
​
60782
60783
60784
60785
Volume
ml
Unit
piece
Price
EURO
THOMAPLAST®-Test Tube made of PS - crystal-clear
125
250
500
1,000
1
1
1
1
72.00
90.00
94.00
130.00
•Cylindrical disposable tubes with or without rim made of polystyrene (PS).
•Not suitable for solvents and temperatures exceeding +70 °C and for
centrifugation.
Product specification
​
THOMAPLAST®-Separatory Funnel made of FEP
Product specification
•Transparent, shatterproof separatory funnel made of fluorinated
ethylene-propylene (FEP), fitted with a easy-turnable, self-lubricating
cock and leakproof screw closure. Excellent resistance to chemicals
and temperature from -200 to +205 °C.
•FEP is antiadhesive and easy to clean. Filled-in substances discharge
completely without adhesion to the funnel wall.
​
60918
60918
THOMAPLAST® I - 2015 29
Laboratory Plastics - Test Tubes and Centrifuge Tubes
Item
​
60915
60917
60918
60920
60912
Volume
ml
Outside Ø
mm
Height
mm
Rim
​
Unit
piece
Price
EURO
4
4
5
5
10
11
11
12
12
16
55
70
86
92
100
without
without
with
without
without
250
250
250
250
250
50.00
50.00
50.00
75.00
75.00
Containers
THOMAPLAST®-Centrifuge Tube made of PP „Micro“
Product specification
•Made of PP (polypropylene), type Eppendorf®, in solid, clean design
with retaining tape at the lid, heat resistant to +130 °C, sterilized
•Thin-walled lid section for perforation
​
THOMAPLAST®-Test Tube made of PP with stopper or label
Product specification
•Translucent cylindrical or conical tubes, with stopper
made of polypropylene (PP) or label.
​
Item
​
60661
60662
Volume
ml
Outside Ø
mm
Height
mm
Cap
​
Unit
piece
Price
EURO
1.5
1.5
11
11
40
40
with
without
250
250
50.00
50.00
THOMAPLAST®-Centrifuge Tube made of PTFE round bottom, without rim
​
Item
​
Volume Outside Ø Height
ml
mm
mm
609381
3
12
55
609321
10
16
100
609331
10
16
100
Design
​
Unit
piece
Price
EURO
250
50.00
250
75.00
250
75.00
cylindrical,
with stopper
cylindrical,
with stopper
conical,
with stopper
RCT®-Accessories: Stopper made of PE with Colour
Code for Test Tubes
Item
​
ml
Outside
Ø
mm
12051
60222
12052
12053
7
12
28
50
12
16
24
34
​
Item
​
60931
60932
60933
60934
60937
60940
60921
60922
60923
60924
60925
60929
Outside Ø
mm
Colour
​
Unit
piece
Price
EURO
12
12
12
12
12
12
16
16
16
16
16
16
blue
white
yellow
red
brown
pink
blue
white
yellow
red
green
violet
250
250
250
250
250
250
250
250
250
250
250
250
25.00
25.00
25.00
25.00
25.00
25.00
50.00
50.00
50.00
50.00
50.00
50.00
Volume
Wall
thickness
mm
Height
Unit
Price
mm
piece
EURO
1
1
2
2.5
100
100
100
100
1
1
1
1
40.00
42.00
48.00
64.00
Test Tube Racks and Desiccators
THOMAPLAST®-Sample Tube Rack made of PC
Product specification
•Unbreakable and impact-resistant racks made of crystal-clear
polycarbonate, for storing of cylindrical sample tubes up to 25 mm Ø in
numbered positions. Excellent stability and resistance to water, aqueous salt solutions and acids, suitable for placing in water baths, e.g.
for derivatization of analytical samples etc. Scratch-proof, non-porous
surface, dirt-repellent and easy to clean. Allows non-slip stacking up to
100 mm height even when filled with tubes.
​
30 THOMAPLAST® I - 2015
Laboratory Plastics - Test Tube Racks and Desiccators
Containers
THOMAPLAST®-Sample Tube Rack made of PP
Product specification
•Unbreakable and impact-resistant racks made of chemical-resistant,
opal-white polypropylene, for storing of cylindrical sample tubes up to
30 mm Ø in numbered positions. Scratchproof, non-porous surface,
dirt-repellent, easy to clean, and autoclavable. Allows non-slip stacking
up to 100 mm height even when filled with tubes.
​
Item
​
83252
83253
83255
Number of
places
​
Dimensions
LxWxH
mm
72
40
40
234 x 113 x 108
270 x 112 x 133
322 x 127 x 133
Suitable for Unit
Ø tubes
mm
piece
10 - 13
13 - 16
21 - 25
1
1
1
Price
EURO
76.00
76.00
76.00
THOMAPLAST®-Test Tube Rack made of LDPE
Item
​
​
83247
83248
83249
83250
83251
Number of
places
​
Dimensions
LxWxH
mm
72
40
40
40
24
229 x 111 x 130
263 x 111 x 130
263 x 111 x 130
318 x 111 x 130
292 x 111 x 130
Suitable for Unit
Ø tubes
mm
piece
11 - 13
13 - 16
16 - 20
21 - 25
26 - 30
1
1
1
1
1
Price
EURO
44.00
46.00
46.00
57.00
57.00
THOMAPLAST®-Desiccator made of PP/PC
Item
​
60734
60735
Number of
places
​
Dimensions
LxWxH
mm
Ø tubes
Unit
Price
mm
piece
EURO
12
24
190 x 60 x 80
375 x 65 x 85
21
21
1
1
25.00
50.00
THOMAPLAST®-Test Tube Rack made of PVC
​
Product specification
•Conventionally built desiccator with a bottom made of polypropylene
and an easily removable flat-domed top made of fully transparent
polycarbonate, with ribbed knob.
•The bottom can be filled with a desiccant. The material to be dried is
placed on the perforated plate made of PP. The cover seals with an
O-ring made of Neoprene®.
•Large interior volume, low weight, unbreakable and implosion-proof.
Temperature-loadable up to +120 °C, not suited for working with
organic solvents.
•Available in 2 designs
The design with cock: A laterally joined stopcock with lubrication-free
PTFE-plug for air entrance can be connected with a 1/4“ (6.3 mm)
vacuum tubing. The desiccator is additionally vacuum-tight for 24 h at
+20 °C under 29.9“ Hg (759 mm).
​
Item
​
Design
​
60952 for 20 test tubes up to 12 mm Ø
60953 for 20 test tubes up to 18 mm Ø
60954 for 40 test tubes up to 12 mm Ø
Dimensions LxWxH Price
mm
EURO
120 x 110 x 65
140 x 120 x 65
240 x 110 x 65
43.00
43.00
54.00
THOMAPLAST® I - 2015 31
Laboratory Plastics - Test Tube Racks and Desiccators
Item
Design
​
I-Ø
Ø O-Ø Clearance Outside Price
disc
above
height
plate
mm mm mm
mm
mm
EURO
​
94020 with cock 149
94022 with cock 197
94024 with cock 240
94026 without cock 150
94027 without cock 200
94028 without cock 240
140
190
230
140
190
230
171
230
273
171
230
273
121
157
197
121
157
197
206
260
311
206
260
311
108.00
136.00
151.00
59.00
79.00
113.00
THOMAPLAST®-Desiccator made of PC
Containers
Item
​
Ø disc
mm
Unit
piece
Price
EURO
140
190
230
1
1
1
27.00
35.00
41.00
94035
94036
94037
RCT®-Accessories: Desiccating Cartridge
Application area
•Desiccant in desiccators
•Air conditioning in microbalances
•Air conditioning of sensitive optical devices
Product specification
Product specification
•Conventionally built desiccator made of strong, fully transparent
polycarbonate. Easily removable flat-domed top with ribbed knob
and laterally joined 1/4” stopcock for evacuation. Stable bottom with
non-skid fitted perforated plate made of 3.2 mm thick polypropylene.
Vacuum-tight seal not requiring grease with O-ring made of Neoprene®. Large interior volume, low weight and unbreakable. Temperatureloadable up to +120 °C, not suited for working with organic solvents.
​
•Active but chemically inert silica gel for water absorption, capsulated
in a shatterproof fibre-reinforced polyester cartridge with gaspermeable fine-perforated Mylar®-cover. Highly effective due to large
surface of the gel beads. Blue/red colour indicator for indication of
the exhaustion degree. Regeneration at +150 °C in a drying cabinet.
Ready for immediate use. Available in three different sizes, preferably
for THOMAPLAST®-vacuum desiccators, item 83273 to 83275 as well
as 94020, 94022, and 94024.
​
Item
​
83273
83274
83275
Volume I-Ø
Ø
disc
l
mm
mm
O-Ø Clearance Outside Price
above
height
plate
mm
mm
mm
EURO
2.1
4.7
8.9
149
197
240
140
190
230
171
230
273
121
157
197
206
260
311
Item
​
83279
83280
83281
158.00
226.00
289.00
RCT®-Accessories: Desiccator disc made of PP
Outside
Ø
mm
For
desiccator Ø
mm
Weight
Unit
Price
g
piece
EURO
114
197
238
up to 160
up to 200
up to 250
230
680
1,360
1
1
1
54.00
96.00
164.00
Cases, Trays, Bowls, Pails and
DEWAR-Vessels
Product specification
•Disc made of polypropylene.
•Usable up to a max. of +120 °C.
​
THOMAPLAST®-Drawer Tray made of PVC
Product specification
•Type I: Contains 9 compartments for small flasks of 25 mm Ø. For
storage of blood samples, chemical analysis samples, coagulation
substances etc.
•Type II: Tray with 12 compartments allows separately arranging small
accessory parts in the drawer, such as standard stoppers, bottle
stoppers, capsules etc.
•Type III: With 5 cavities of different sizes for pipettes, thermometers,
connectors etc.
​
32 THOMAPLAST® I - 2015
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels
Containers
Item
Volume Inner dimension Outer dimension Unit Price
of base LxW
of rim LxWxH
l
mm
mm
piece EURO
​
40039
40040
40041
40042
40043
40044
Item
​
60730
60731
60732
0.5
1.5
3
10
21
39
130 x 180
180 x 240
240 x 300
300 x 400
400 x 500
500 x 600
180 x 230 x 42
250 x 310 x 65
310 x 370 x 75
420 x 520 x 120
534 x 634 x 140
648 x 846 x 160
3
3
2
1
1
1
30.00
48.00
46.00
39.00
54.00
75.00
Type
​
Dimensions LxWxH
mm
Unit
piece
Price
EURO
THOMAPLAST®-Lab Storage Container made of PP
I
II
III
300 x 355 x 45
300 x 410 x 65
300 x 410 x 70
1
1
1
64.00
74.00
68.00
Product specification
•Particularly suitable for chemicals or for use as water bath and storage
container. In shatterproof chemical-resistant design. Usable up to +90 °C.
​
THOMAPLAST®-Pipette Tray Rack made of PVC
Product specification
•Suitable for all lab drawers
​
Item
​
Item
​
60733
Dimensions LxWxH
mm
Unit
piece
Price
EURO
420 x 300 x 40
1
49.00
61043
61044
11612
11613
11614
11615
Dimensions LxWxH
(inside)
mm
Wall
thickness
mm
Price
EURO
220 x 120 x 120
250 x 150 x 150
300 x 160 x 160
300 x 220 x 220
350 x 250 x 160
420 x 280 x 260
5
5
5
5
5
5
150.00
153.00
159.00
183.00
176.00
199.00
THOMAPLAST®-Experimental Tray made of PP
RCT®-Accessories: Flat Cover with Handle made of PP
Product specification
Product specification
•Experimental tray made of shatterproof, surface-polished
polypropylene (PP). Rounded edge.
•Temperature-resistant from -20 to +135 °C, sterilizable.
•Suitable for food.
•Tray is also available made of electrically conductive polypropylene
(explosion protection and semiconductor technology resp.).
•Suitable for lab storage containers made of PP.
•Usable up to +90 °C.
•Cover-thickness: 10 mm
​
​
Item
​
61093
61094
61095
For item
​
Unit
piece
Price
EURO
61043
61044
11612
1
1
1
46.00
49.00
54.00
THOMAPLAST® I - 2015 33
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels
Item
​
Containers
For item
​
Unit
piece
Price
EURO
THOMAPLAST®-Chemical Bowl made of PP
11613
11614
11615
1
1
1
58.00
64.00
70.00
•Chemical bowl made of polypropylene (PP) for transport of reagent
containers as well as solid and liquid chemicals. An indispensable tool
due to its resistance to inorganic and organic compounds.
61096
61097
61098
Product specification
​
THOMAPLAST®-Staining Box made of PFA
Product specification
•Staining box with cover for slides of 25 x 75 mm size
​
Item
​
Item
​
72549
Dimensions LxWxH
mm
Colour
​
Price
EURO
39 x 83 x 19
nature
106.00
THOMAPLAST®-Reaction Pan made of PFA
Dimensions
mm
Height
mm
Unit
piece
Price
EURO
160
200
240
280
320
360
400
70
80
100
120
130
150
180
3
2
2
2
2
2
2
27.00
21.00
27.00
35.00
45.00
47.00
54.00
28653
28654
28655
28656
28657
28658
28659
THOMAPLAST®-Chemical Pail made of LDPE
​
Product specification
•Chemical pail made of very strong LDPE (white) with bail made of metal.
•A stable grip edge in the pail bottom allows safe pouring through wide
spout.
•Prominent liter scale permits easy control of volume.
​
Item
​
72548
Dimensions LxW
mm
Colour
​
Price
EURO
25 x 101
nature
59.00
THOMAPLAST®-Lab Pan made of PFA
​
Item
​
40009
40011
Volume
l
Height
mm
Outside Ø
mm
Colour
​
Unit
piece
Price
EURO
10
15
280
340
290
320
white
white
1
1
40.00
55.00
THOMAPLAST®-Packaging Bucket made of PP
Product specification
Item
​
72550
Volume
ml
Dimensions LxWxH
mm
Colour
​
Price
EURO
700
150 x 100 x 50
nature
139.00
34 THOMAPLAST® I - 2015
•Bucket made of white polypropylene (PP) for transport, packaging and
storage of various substances
•Especially suitable for food and building materials, and non-aggressive
chemicals in the environment and hospitals with tightly closing cover
•A strong metal handle with the lock on the bucket guarantees product
safety
​
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels
Containers
Technical specification
•Inside: 360 x 270 x 100 mm
•Outside: 420 x 330 x 130 mm
•Sidewall thickness: 20 mm
Item
​
Volume
l
Colour
​
Unit
piece
Price
EURO
10
10
red
black
1
1
213.00
213.00
41006
41007
Item
​
40013
40014
40015
40016
40017
40018
40019
40020
40021
40022
Volume
l
Height
mm
Outside Ø
mm
Unit
piece
Price
EURO
1
1
2
2
3
3
5
5
10
10
131
131
132
132
132
132
194
194
263
263
132
132
175
175
225
225
225
225
268
268
5
10
5
10
5
10
5
10
5
10
29.00
44.00
40.00
60.00
58.00
86.00
61.00
90.00
80.00
120.00
THOMAPLAST®-Ice Bucket made of Foamed PVC
Product specification
•For taking up of dry ice or flake ice and freezing mixtures, liquid
nitrogen and heating baths. Temperature range of -200 to +80 °C. Due
to their favourable properties they are used in many labs and serve as
containers for ice or freezing mixtures to cool reactions or biochemical
systems. Completely smooth and liquid-tight at the surface, inside
porous and heat-insulating, light-weighted, unbreakable and flexible
but dimensionally stable, of good chemical resistance.
​
THOMAPLAST®-Ice and Cooling Tray
Application area
•For safe and clean deposition as well as the transport of lab glass, lab
and analytical samples, chemical storage containers, instruments, fittings and tools. Also for use as damage tray in technical, chemical, and
radiochemical pilot plants or as trough for etching and cooling baths.
Product specification
•Splatterproof rectangular tray with high edge made of foamed,
temperature-insulating and polyvinylchloride (PVC), jointless moulded
in one piece, walls slightly inclined, rounded corners and edges,
molded-in continuous grip bead. Non-porously densified, smooth,
scratch- and impact-resistant, easy to clean surface, hygienic, odourless and flavourless, free of water-leachable components. Resistant to
many chemicals and additives, such as salts and salt solutions, also
to cyanide and bichromate solutions, photo chemicals, mineral and
silicone oils, vegetable and animal oils, alcohols and glycols, petrol,
diesel, formaldehyde, acetone, mercury, accu acids, sulfuric acid,
chromosulfuric acid, nitric acid up to 50 %, alkalis, hydrogen peroxide,
dry ice, liquid nitrogen etc.
•Not resistant to aromatic solvents except benzyl alcohol, halogenated
solvents, esters and tetrahydrofuran (THF), temperature-resistant from
-196 to +95 °C.
Item
​
940001
Volume
l
Outside Ø
mm
Height
mm
Colour
​
Price
EURO
5
280
190
black
95.00
THOMAPLAST®-DEWAR-Vessel made of XLPE Plastic
Product specification
•The first shatterproof DEWAR vessel made of plastic for working in
the low-temperature range. The double walls are made of new crosslinked polyethylene (XLPE-plastic) being resistant to thermic shock
up to -196 °C. The cover is made of expanded polystyrene with vent.
The Dewar vessel features outside moulded-in ribs for stability and a
convenient plastic-coated bail-type handle except the 10 liter vessel.
•Temperature range: -196 to +100 °C.
•The vessel should be well cooled before putting it into operation!
​
​
THOMAPLAST® I - 2015 35
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers
Item
Volume
​
l
Dimensions
ØxH (inside)
mm
95051
95052
95054
95055
1
2
4
10
95 x 195
125 x 225
165 x 290
205 x 380
Laboratory Instruments
Price
THOMAPLAST®-Scoop made of HDPE
mm
EURO
Product specification
230
290
355
470
195.00
295.00
295.00
346.00
Height
•Natural colouring and conical in shape with tapered filling edge.
​
Laboratory Instruments
Scoops, Spoons, Spatulas and Tweezers
THOMAPLAST®-Sample Spatula - sterile
Item
​
Product specification
•Sterile spatula for direct sampling out of bags without contamination.
•Permanent handle.
•Sturdy edges break up any caked material.
60637
60638
60640
60641
60642
60643
60644
​
Volume
ml
Length
mm
Unit
piece
Price
EURO
15
25
110
150
350
500
1,000
115
135
210
250
310
350
400
3
3
3
3
2
2
2
12.00
15.00
15.00
15.00
14.00
20.00
32.00
THOMAPLAST®-Metering Scoop made of PP
Product specification
Item
​
60402
Volume
ml
Length
mm
Unit
piece
Price
EURO
36
230
20
72.00
•Unbreakable scoops made of polypropylene (PP) with flat, beveled
edge and reinforced handle. Volume marking well visible on the
handle. Sterilizable up to +130 °C, chemical-resistant.
​
THOMAPLAST®-Sample Spoon - sterile
Product specification
•For drawing of small amount of sample material.
•The long handle allows drawing of samples in depth without hazard of
contamination of the hand.
•Made of styrene, sterile and individually packaged.
​
Item
​
Item
​
60404
60405
60406
60407
Volume
ml
Length
mm
Unit
piece
Price
EURO
1.2
2.5
5
15
180
180
180
180
50
50
50
50
150.00
150.00
150.00
150.00
36 THOMAPLAST® I - 2015
40549
40550
40551
40552
40553
40554
40555
40556
40557
40558
40559
40560
40561
40562
Volume
ml
Length
mm
Width
mm
Unit
piece
Price
EURO
2
2
5
5
10
10
25
25
50
50
100
100
250
250
60
60
82
82
100
100
135
135
160
160
200
200
260
260
15
15
24
24
34
34
44
44
55
55
70
70
90
90
12
24
12
24
12
24
12
24
12
24
6
12
6
12
18.00
36.00
24.00
36.00
24.00
36.00
36.00
60.00
48.00
72.00
45.00
60.00
66.00
102.00
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers
Item
​
Volume
ml
Length
mm
Width
mm
Unit
piece
Price
EURO
500
500
1,000
1,000
315
315
385
385
118
118
134
134
3
6
1
3
48.00
69.00
21.00
48.00
Laboratory Instruments
THOMAPLAST®-Tweezers made of Nickel-Plated
Forged Steel - PTFE-Coated
​
40563
40564
40565
40566
THOMAPLAST®-Scraper made of PP
Product specification
•Very sturdy, unbreakable, chemical-resistant scraper made of polypropylene (PP), sterilizable up to +121 °C, colour: white.
​
Item
​
60473
60474
60475
60476
Design
​
Length of
PTFE coating
mm
Unit
Price
piece
EURO
straight point
straight point
straight point
serrated and curved point
38
19
98
98
2
2
2
2
38.00
36.00
49.00
47.00
THOMAPLAST®-Tweezers made of POM
Item
​
11768
11769
Length
mm
Width
mm
Unit
piece
Price
EURO
205
250
75
110
2
2
35.00
40.00
Product specification
•Made of POM (polyoxymethylene)
•Yellow, blunt, elastic, very good resilience.
​
THOMAPLAST®-Sieve with Perpendicular Handle
made of PFA
Product specification
•Sieve with long handle (approx. 18 cm) and suspension device.
Optionally different mesh sizes (0.5 and 1.0 mm resp.); for cups with
an internal diameter up to 7.6 cm.
​
Item
​
60633
60634
60635
60636
Item
​
72556
72557
Mesh size
µm
Dimensions ØxH
mm
Price
EURO
500
1,000
19 x 64
19 x 64
108.00
108.00
Length
mm
Unit
piece
Price
EURO
115
145
180
250
3
3
2
2
12.00
12.00
13.00
17.00
THOMAPLAST®-Tweezers made of PTFE with blunt ends
Product specification
•Completely metal-free tweezers with blunt ends. Electrically nonconducting, chemical-resistant, free of leachable components and
biocompatible; temperature-resistant from -200 to +260 °C, sterilizable
with all commonly used methods.
​
THOMAPLAST® I - 2015 37
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers
Laboratory Instruments
Pestles and Mortars
THOMAPLAST®-Pestle for microcentrifuge tubes
Application area
•Resuspending, homogenizing, dissolving of small and smallest material quantities without losses in microcentrifuge tubes.
Product specification
Item
​
Length
mm
Unit
piece
Price
EURO
100
150
200
1
1
1
45.00
60.00
66.00
47942
47943
47944
•Conical PTFE body, fitting into THOMAPLAST®-microcentrifuge tubes,
item 60661 and 60662 resp., with precisely centred stainless steel shaft
(143 x 3.2 mm), for manipulations by hand or with motor actuator.
​
THOMAPLAST®-Spatula made of Chromium Nickel
Steel with PTFE Coating
​
Item
​
Unit
piece
Price
EURO
1
80.00
83270
THOMAPLAST®-Pestle / Mortar
Product specification
Item
​
Design
​
Length Unit Price
mm piece EURO
60259
one flat end, one spoon end
60258
double flat ends
60257 both sides leaf-shaped (Hayman Style)
60253
tapered pallet (hardwood handle)
225
200
150
150
1
1
1
1
•Made of melamine, white.
​
64.00
36.00
39.00
61.00
THOMAPLAST®-Crucible Tong with PTFE Coating
​
Pestles
Item
​
60665
60666
60667
60668
Item
Length
​
mm
Length of
PTFE coating
mm
60256
240
75
38 THOMAPLAST® I - 2015
Price
Mortars
piece
EURO
1
51.00
Item
​
Unit
60663
60664
Ø flask
mm
Length
mm
Weight
g
Unit
piece
Price
EURO
30
35
40
42
125
145
160
245
55
85
120
175
1
1
1
1
26.00
26.00
31.00
57.00
Volume
ml
Outside Ø
mm
Height
mm
Unit
piece
Price
EURO
300
500
125
150
75
90
1
1
21.00
23.00
Laboratory Plastics - Precision Knives and Scalpels
Laboratory Instruments
Technical specification
Precision Knives and Scalpels
•Material scalpel-style knife: blade: stainless steel
handle: aluminium
•Material pen-style knife: blade: stainless steel
blade holder: aluminium, handle: plastic
THOMAPLAST®-Mini Precision Knife
with Pointed Blade - ground on one side
​
Product specification
•Knife handle made of aluminum.
•Precision blade made of stainless steel, very pointed.
•Replacement of blades by loosening the grip head.
​
81170 / 81174
81171
Item
​
Item
​
81168
81169
Design
​
Unit
piece
Price
EURO
precision knife
replacement blade
2
10
24.00
20.00
81170
81174
81171
Design
​
Unit
piece
Price
EURO
knife, mini scalpel-style
knife, pen-style
replacement blade
3
1
1
24.00
12.00
2.00
Design
​
Unit
piece
Price
EURO
precision knife
replacement blade
2
10
26.00
20.00
THOMAPLAST®-Super Precision Knife
for Particularly Fine Cuts
Product specification
THOMAPLAST®- Mini Precision Knife
with Pointed Blade - ground on three sides
•Exchangeable blade
​
Product specification
•Knife with retractable, three-sided ground blade
•Handle and blade holder made of stainless steel
•Precision changeover blade made of stainless steel
•With clip
​
Item
​
81182
81183
Item
​
81172
81173
Design
​
Unit
piece
Price
EURO
precision knife
replacement blade
3
10
36.00
20.00
THOMAPLAST®-Scalpel made of Steel
​
THOMAPLAST®-Precision Knife with Curved Blade
Product specification
•Precision knife as scalpel-style knife (mini-precision knife) or as penstyle knife available
•Scalpel-style knife: replacement of blades by loosening the cone
•Pen-style knife: with clip
​
81165
THOMAPLAST® I - 2015 39
Laboratory Plastics
Metering Facilities and Metering Devices
Product specification
Item
​
•Handle made of steel, forged and chromium plated
•Exchangeable blade
•Suitable for heavy-duty applications
Item
​
Scalpel blade No.
​
Unit
piece
Price
EURO
21
24
25
2
2
2
32.00
32.00
32.00
81165
81166
81167
40838
40899
81041
81042
81043
Volume
ml
Length
mm
Unit
piece
Price
EURO
5
10
25
50
100
330
440
460
470
610
3
3
1
1
1
63.00
72.00
64.00
69.00
136.00
THOMAPLAST®-Pipette Suction Bulb made of NR
Product specification
Metering Facilities and Metering Devices
•Pipette suction bulb made of natural rubber (NR) for pipettes of all sizes.
​
THOMAPLAST®-Pipette made of HDPE
Product specification
•For use as suction and metering pipette.
•When filled, the pipette is not self-discharging.
•Resistant to acids and solvents.
​
Item
​
40270
40271
40272
40273
Item
​
61129
61130
Volume
ml
Length
mm
1.5
5
135
195
Graduation Unit
ml
piece
0.5
1
50
50
Price
EURO
40.00
45.00
THOMAPLAST®-Universal Bulb Pipette made of PP
Product specification
Colour
​
Unit
piece
Price
EURO
red
red
transparent
transparent
30
50
30
50
27.00
30.00
27.00
30.00
THOMAPLAST®-Squeeze-Bulb Pipette Filler made of NR
Product specification
•Pipette filler made of natural rubber (NR) for any application area.
The fillers are resistant to chemicals. Carefully chosen plastics avoid
sticking and brittling.
•The standard types (DNV 1) are suited for pipettes up to 10 ml. For
pipettes with volumes exceeding 10 ml the universal model (DNV 2)
has to be used.
​
•Volumetric pipette made of polypropylene (PP).
•Transparent, permanently coloured ring mark (blue) and marking.
•Temperature resistant: up to +70 °C, at higher temperatures a volume
change occurs.
​
Item
​
40836
40837
Volume
ml
Length
mm
Unit
piece
Price
EURO
1
2
300
300
3
3
39.00
48.00
40 THOMAPLAST® I - 2015
Item
​
Type
​
Unit
piece
Price
EURO
28645
28647
DNV1
DNV2
1
1
30.00
35.00
Laboratory Plastics
Metering Facilities and Metering Devices
THOMAPLAST®-Macro Pipetting Aid
Product specification
•The temperature-resilient plastic coating helps the entire device to
resist breakage and glass fragments are confined within the sheath.
•Material: burette of borosilicate glass 3.3, burette stopcock PMP/PTFE.
​
•Suction by means of a macro volume suction bellows, one stroke of
the bellows amounts to 50 ml.
•Control: Adjustment of the meniscus and dispensing (free discharge) is
effected by a control lever.
•In case of blow-out pipettes the ”blow-out function” is activated by
pressing the blow-out bellows.
•For use with volumetric, measuring and blow-out pipettes made either
of glass or plastics with a volume range of 0.1 to 100 ml.
•A hydrophobic membrane filter protects the pipetting system against
entering liquid.
•Pipetting aid end adapter and protection filter can be steam sterilized
up to +121 °C, 20 min.
•Low weight: approx. 95 g.
•Accessory: Pipetting suction bellows item 40879 (www.rct-online.de).
​
Item
​
28681
28682
Volume
ml
Graduation
ml
Length
mm
Unit
piece
Price
EURO
50
25
0.1
0.05
800
800
1
1
95.00
80.00
THOMAPLAST®-Burette Clamp made of PP - double
Product specification
•For support rods 8-14 mm Ø
​
Item
​
40883
Unit
piece
Price
EURO
1
87.00
RCT®-Accessories for Pipette
​
Item
​
Max. number of burettes
​
Unit
piece
Price
EURO
2
1
50.00
60779
THOMAPLAST®-Variable Volume Dispenser made of PE
Product specification
Item
​
For item
​
Design
​
Unit Price
piece EURO
81079 58694-98 + 58708-09
pipette tip
81080 58699-703 + 58710-12
pipette tip
12068 58704-07 + 58713
pipette tip
58715
58714
pipette tip
58716
58714
protection filter (fibre)
500 100.00
500 100.00
500 100.00
100 50.00
100 50.00
•Storage bottle with capacity of 0.25 l and 0.5 l resp. and tightly
screwable measuring chamber, both made of unbreakable, physiologically safe and chemically inert polyethylene, for clean and rapid
metering of adjustable volumes from 5 to 50 ml. Free of extractable
components, suitable for organic reagents, scintillation solutions,
buffers, solvents, alkalis and acids, except concentrated sulfuric and
nitric acid.
​
THOMAPLAST®-Safety Volumetric Burette
with Schellbach Stripes
Product specification
•Plastic-coated burette made of borosilicate glass 3.3. Class B. Conformity with DIN ISO 384. With Schellbach stripes (blue/white) and easily
readable black scaling. Calibrated to deliver ,Ex’. The stopcock of the
burette turns easily and allows fine titration.
THOMAPLAST® I - 2015 41
Laboratory Plastics
Metering Facilities and Metering Devices
•Slightly squeezing the handy storage bottle forces the liquid to be
metered through the fill tube of the metering chamber into the measuring vessel. Overfill is sucked back into the bottle when pressure is
released. The metered liquid can be poured off the measuring vessel
without problems.
•The required volume is adjusted by moving the fill tube.
Item
​
Capacity
bottle
ml
Capacity
measuring vessel
ml
piece
EURO
250
500
25
50
2
2
40.00
42.00
12069
83260
Unit
Price
Item
​
THOMAPLAST®-Titration Apparatus
60240
60241
60242
60243
60244
60245
60246
60247
Product specification
•Automatic burette acc. to Dr. Schilling with pushbutton dispenser
and microscrew, which facilitates precise titration. Rapid filling of the
burette by squeezing the polyethylene bottle. Automatic self-zeroing.
Alternatively available with screw cap for adjustable zeroing or firmly
melted-in adjustable zero point. With blue scale, better than class B,
extremely resistant to acids, alkalis and solvents. The blue graduation
allows optimal reading and is made of self-coloured melted-on glass.
The surface of the glass burette is not hurt - decreased risk of breakage.
Rapid pre-titration with pushbutton until just before reaching the indicator transition, precise titration with microscrew.
Length
mm
Outside Ø
mm
Unit
piece
Price
EURO
100
150
200
250
300
350
400
600
6
6
6
6
6
6
6
6
1
1
1
1
1
1
1
1
30.00
33.00
34.00
40.00
44.00
51.00
60.00
129.00
THOMAPLAST®-Stirring Spatula made of PTFE
​
​
Item
​
60866
60867
60868
60869
60870
Capacity
burette
ml
Graduation Accuracy
5
10
15
25
50
ml
ml
Capacity
bottle
ml
0.05
0.05
0.1
0.1
0.1
±0.015
±0.030
±0.045
±0.045
±0.060
500
500
500
1,000
1,000
Stirring and Mixing
Stirrers and Stirring Devices
THOMAPLAST®-Stirring Bar made of PTFE
Product specification
•PTFE coated steel core with round ends.
•Can be bent as required; the shape is permanently retained.
​
42 THOMAPLAST® I - 2015
Price
EURO
92.00
92.00
92.00
92.00
98.00
Item
​
60249
60250
60251
Length
mm
Width
mm
Unit
piece
Price
EURO
120
150
180
16
16
16
1
1
1
20.00
21.00
25.00
THOMAPLAST®-Stirrer made of PP - round blades
Product specification
Shaft mounted stirrer made of steel with PP coating. Stirrer blades made
of PP. Two blades in different sizes (A and B) spreading at rotation:
•A: Width of blades when completely spreaded: 60 mm. Stirrer shaft Ø:
8 mm. Length: approx. 350 mm. Fits through a bottle neck of 26 mm Ø.
•B: Width of blades when completely spreaded: 100 mm. Stirrer shaft Ø:
8 mm. Length: approx. 350 mm. Fits through a bottle neck of 29 mm Ø.
​
Laboratory Plastics - Stirrers and Stirring Devices
Item
​
60835
60836
Stirring and Mixing
Blade
width
mm
Ø
bar
mm
Ø
neck
mm
Length
Unit
Price
mm
piece
EURO
60
100
8
8
26
29
350
350
1
1
39.00
39.00
THOMAPLAST®-Stirrer made of PP - propeller
Application area
•Stirring and mixing of low viscous and corrosive media, particularly for
preparation of suspensions and emulsions.
Product specification
Item
​
12064
961161
96118
961172
•Shaft mounted stirrer with precisely centred, polypropylene-coated
steel shaft and three slightly staggered cloverleaf-shaped, fixed and
sturdy stirrer blades. Low resistance and high efficiency.
​
1
Design
​
For jars
ml
Inside Ø
mm
Unit
piece
Price
EURO
triangular
triangular, long
half-round, long
half-round
>= 3
>= 5
>=10
>=20
8
10
13.5
15
1
1
1
1
17.00
20.00
23.00
23.00
only for conical jars
2
only for round jars
THOMAPLAST®-Magnetic Stirring Bar made of PTFE Standard
Product specification
•Stirring bars with permanent-magnetic core, PTFE-coated, without
pivot ring, non-contaminating.
​
Item
​
83292
Length
mm
Blade width
mm
Ø bar
mm
Unit
piece
Price
EURO
350
60
8
2
85.00
THOMAPLAST®-Stirring Bar Retriever made of PTFE
Product specification
•With magnetic core, sturdy design and temperature-resistant up to +275 °C.
​
Item
​
Item
​
61138
61139
61140
61141
Length
mm
Magnet-Ø
mm
Bar-Ø
mm
Unit
piece
Price
EURO
150
250
300
350
10
10
10
10
8
8
8
8
1
1
1
1
25.00
27.00
28.00
30.00
THOMAPLAST®-Magnetic Stirrer made of PTFE
for Tubes
Product specification
•For small centrifuge tubes and reaction cups
•Triangular shape
40676
40677
40678
40679
40680
40681
40682
40683
40684
40685
40686
40687
40688
40689
40690
40691
40692
40693
40694
40695
Length
mm
Outside Ø
mm
Unit
piece
Price
EURO
2.4
3
5
6.3
7
8
8
10
10
13
15
15
15
20
25
30
35
40
45
50
2.4
3
2
3
2
2
3
3
6
3
4.5
2
6
6
6
6
6
8
8
8
3
3
3
3
3
3
4
3
5
3
5
2
5
5
5
5
4
4
3
3
21.00
21.00
24.00
24.00
27.00
27.00
30.00
24.00
25.00
30.00
34.00
28.00
34.00
35.00
33.00
36.00
36.00
36.00
36.00
33.00
​
THOMAPLAST® I - 2015 43
Laboratory Plastics - Stirrers and Stirring Devices
Item
​
40696
40697
40698
961091
961092
Stirring and Mixing
Length
mm
Outside Ø
mm
Unit
piece
Price
EURO
60
70
80
108
159
9
9
10
27
27
2
2
2
1
1
30.00
30.00
31.00
164.00
195.00
Item
​
40666
40667
Length
mm
Outside Ø
mm
55
80
14
17
Edge length Unit
mm
piece
15
16
2
1
Price
EURO
36.00
27.00
THOMAPLAST®-Laboratory Magnet Stirrer
Product specification
THOMAPLAST®-Magnetic Stirring Bar made of PTFE highly resistant
Product specification
•With highly resistant coating for concentrated acids, dyes etc.
•Large and flat work surfaces, which are easy to clean
•Compact, space-saving design
•Automatic start-up for safe acceleration of the stirring bar
•Adjustable stirring power, regardless of the speed control
•User-friendly control by rotary knob
Technical specification
​
•Speed: 130 - 1200 rpm
•Stirring volume: up to 3 l
•Stirring power: up to 5 W
•Protection class: IP 32
•Environmental temperature: -10 to +40 °C
•Dimensions: 180 x 215 x 35 mm (W x D x H)
•Power pack: 230 V
•Weight: 1.4 kg
​
Item
​
961011
961012
961014
961016
Length
mm
Outside Ø
mm
Unit
piece
Price
EURO
22
13
25
38
6
9.5
9.5
9.5
1
1
1
1
18.00
18.00
18.00
23.00
Item
​
THOMAPLAST®-Magnetic Stirring Bar
made of PTFE - triangular
17995
Dimensions
mm
Unit
piece
Price
EURO
180 x 215 x 35
1
544.00
Product specification
•Triangular stirring bars with permanent-magnetic core, PTFE-coated.
​
Drying Tubes, Gas Sampling Bulbs and
Accessories
THOMAPLAST®-Drying Tube made of LDPE
Product specification
•For filling with silica gel or other hygroscopic materials. With 2 tubing
adapters made of polypropylene (PP) for tubing of internal diameters
of 7-10 mm.
​
Item
​
40659
40660
40661
40662
40663
40664
40665
Length
mm
Outside Ø
mm
12
20
25
25
35
40
50
8
8
8
14
10
14
12
44 THOMAPLAST® I - 2015
Edge length Unit
mm
piece
6
8
8
15
10
15
12
3
3
3
3
3
3
3
Price
EURO
18.00
21.00
21.00
36.00
24.00
39.00
36.00
Laboratory Plastics - Drying Tubes, Gas Sampling Bulbs and Accessories
Item
​
Outside Ø
mm
Length
mm
Unit
piece
Price
EURO
21
21
21
100
150
200
12
12
12
48.00
54.00
60.00
61368
61369
61370
Item
​
47945
47946
47947
Stirring and Mixing
Volume Pore size For tubing Height Unit
outside Ø
ml
µm
mm
mm piece
250
500
1,000
3
3
3
6
6
8
175
200
240
1
1
1
Price
EURO
459.00
613.00
693.00
THOMAPLAST®-Gas Sampling Bulb made of PP
Product specification
•Shut-off valve made of polypropylene with free-turnable cock made
of PTFE.
•Connections for tubing of internal diameter of 6.4 to 9.5 mm.
Tube neck Ø: 51 mm
Tube length: 222 mm
Shut-off valve: 64 mm
•In three types:
Shut-off valve on both ends with bore Ø: 4 mm.
Shut-off valve at one end and silicone rubber septum mounted in
screw fitting on the other end. Septum can withstand several injections. 6 septa included.
Shut-off valve with bore Ø: 4 mm at one end, three-way cock at the
other end.
​
Laboratory Stoppers and Caps
Laboratory Stoppers
THOMAPLAST®-Stopper made of NR
Product specification
•Flexible, well tightening design
•Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant
to aging.
Technical specification
•Material: NR (natural rubber)
•Shore hardness A: 40° ±5°
•Colour: red
•Temperature range: -40 to +60 °C
​
Item
​
60451
60452
60453
Type
​
Connection type
​
Unit
piece
Price
EURO
1
2
3
valves on both sides
valve / in-screw fitting with septum
valve / three-way cock
1
1
1
156.00
156.00
156.00
THOMAPLAST®-Safety Gas Wash Bottle
made of PFA/PTFE
Product specification
•Gas wash bottle in shatterproof full plastic version, bottle body made of
PFA, tubing connection and frit system made of PTFE.
•Chemical-resistant, free of leachable components and biocompatible.
•Temperature-loadable, sterilizable with all commonly used methods.
•The standard PTFE frit has a pore size of approx. 3 µm and is screwed
on the riser tube with an M8x1 thread. It can be exchanged.
​
Item
​
Ø top
mm
Ø bottom
mm
Height
mm
Colour
​
Unit
piece
Price
EURO
40353
40354
61080
40355
61082
61083
40356
61084
61085
40358
61086
40360
61087
40363
61088
40366
61089
40369
40372
40375
6.5
9
9
12
12
13
14.5
15
16
16.5
18
18
20
22
23
24
26
27
29
32
3.5
5
6
8
9
10
10.5
11
12
12.5
13
14
14
17
16
18
19
21
23
26
15
20
18
20
18
18
20
18
20
20
22
20
24
25
26
30
28
30
30
30
grey
grey
red
grey
red
red
grey
red
red
grey
red
grey
red
grey
red
grey
red
grey
grey
grey
50
50
50
50
50
50
50
50
50
50
40
50
30
50
20
40
20
30
25
20
25.00
25.00
35.00
30.00
45.00
50.00
35.00
50.00
50.00
45.00
52.00
50.00
42.00
85.00
42.00
88.00
46.00
90.00
80.00
80.00
THOMAPLAST® I - 2015 45
Laboratory Plastics - Laboratory Stoppers
Laboratory Stoppers and Caps
Item
​
Ø top
mm
Ø bottom
mm
Height
mm
Colour
​
Unit
piece
Price
EURO
40378
40381
40384
40385
40386
40387
40388
40389
40390
40391
40392
40393
40394
35
38
44
49
55
59.5
65
70
75.5
83
92
100
107
29
31
36
41
47
50.5
56
60
64.5
71
79
87
94
30
35
40
40
40
45
45
50
55
60
65
65
65
grey
grey
grey
grey
grey
grey
grey
grey
grey
grey
grey
grey
grey
20
15
10
5
5
5
5
3
3
2
2
2
2
100.00
93.00
102.00
62.00
71.00
105.00
117.00
90.00
102.00
80.00
94.00
94.00
96.00
THOMAPLAST®-Stopper made of NR - with bore
Product specification
•Flexible, well tightening design
•Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant
to aging.
Technical specification
•Material: NR (natural rubber)
•Shore hardness A: 40° ±5°
•Colour: grey or red
•Temperature range: -40 to +60 °C
Item
​
40382
40383
Ø
top
mm
Ø
bottom
mm
H
Øa
Bores
Unit
mm
38
38
31
31
35
35
Price
mm
​
piece
EURO
7
7
1
2
15
10
105.00
69.00
THOMAPLAST®-Stopper made of NBR
Application area
•Laboratory technology, machine engineering, automobile industry,
petrochemistry, container technology, chemical technology
Product specification
•Highest resistance to mineral oils, fats and fuels
•Good resistance to weather
•Good resistance to aging
•Very high abrasion resistance
•Good mechanical stability
•Heat resistance better than SBR
•Low permeability to gas
•Special bores on request
Technical specification
•Material: NBR (butadiene-acrylonitrile rubber)
•Colour: black
•Shore hardness A: 45° ±5° (DIN 53505)
•Temperature range: -25 to +100 °C
•Hot air resistance: +120 °C
•Tolerance: according to DIN 7715 T2 M3
​
​
Item
Item
​
Ø
top
mm
40357 14.5
40359 16.5
40361 18
40362 18
40364 22
40365 22
40367 24
40368 24
40370 27
40371 27
40373 29
40374 29
40376 32
40377 32
40379 35
40380 35
Ø
bottom
mm
H
mm
mm
​
10.5
12.5
14
14
17
17
18
18
21
21
23
23
26
26
29
29
20
20
20
20
25
25
30
30
30
30
30
30
30
30
30
30
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
1
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
46 THOMAPLAST® I - 2015
Øa
Bores
Unit
Price
piece
EURO
50
50
50
50
40
40
40
30
30
25
25
25
20
20
15
15
50.00
100.00
65.00
100.00
80.00
120.00
96.00
84.00
90.00
100.00
85.00
100.00
100.00
92.00
90.00
90.00
Ø
bottom
mm
H
Øa
Bores
Unit
​
Ø
top
mm
Price
mm
mm
​
piece
EURO
302467
302468
302471
302472
302473
302474
302475
302476
302477
302478
302479
302480
302481
302482
302483
302484
302485
6.5
6.5
9
9
12
12
14.5
14.5
16.5
16.5
18
18
18
18
22
22
22
3.5
3.5
5
5
8
8
10.5
10.5
12.5
12.5
14
14
14
14
17
17
17
15
15
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
​
​
​
​
​
​
3
3
3
3
3
3
3
3
4
4
4
​
​
​
​
​
​
1
1
1
1
1
1
2
2
1
1
2
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
26.00
36.00
28.00
38.00
36.00
48.00
42.00
56.00
50.00
66.00
62.00
84.00
62.00
84.00
94.00
118.00
94.00
Laboratory Plastics - Laboratory Stoppers
Item
Laboratory Stoppers and Caps
Ø
bottom
mm
H
Øa
Bores
Unit
Price
​
Ø
top
mm
mm
mm
​
piece
EURO
302486
302487
302488
302489
302490
302491
302492
302493
302494
302495
302496
302497
302498
302499
302500
302501
302502
302503
302504
302505
302506
302507
302508
302509
302510
302513
302514
302515
302516
302517
302518
302519
302520
302521
302522
302523
302524
302525
302526
302527
302528
302529
302530
302531
302532
302533
302534
22
24
24
24
24
27
27
27
27
29
29
29
29
32
32
32
32
35
35
35
35
38
38
38
38
44
44
49
49
55
55
59.5
59.5
65
65
70
70
75.5
75.5
83
83
92
92
100
100
107
107
17
18
18
18
18
21
21
21
21
23
23
23
23
26
26
26
26
29
29
29
29
31
31
31
31
36
36
41
41
47
47
50.5
50.5
56
56
60
60
64.5
64.5
71
71
79
79
87
87
94
94
25
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
35
40
40
40
40
40
40
45
45
45
45
50
50
55
55
60
60
65
65
65
65
65
65
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
50
25
50
25
50
25
50
25
50
25
50
25
50
15
30
15
30
15
30
15
30
10
20
10
20
5
10
3
5
3
5
3
5
3
5
3
5
3
5
1
3
1
3
1
3
1
3
118.00
122.00
154.00
122.00
154.00
160.00
204.00
160.00
204.00
198.00
238.00
198.00
238.00
156.00
224.00
156.00
224.00
156.00
224.00
156.00
224.00
172.00
248.00
172.00
248.00
134.00
202.00
102.00
128.00
132.00
168.00
180.00
225.00
230.00
288.00
282.00
346.00
320.00
374.00
130.00
276.00
188.00
394.00
270.00
568.00
382.00
798.00
THOMAPLAST®-Stopper made of Silicone
Product specification
•Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant
to aging.
Technical specification
•Material: silicone
•Shore hardness A: 50° ±5°
•Colour: transparent
•Temperature range: -60 to +180 °C, for a short time up to +260 °C.
​
Item
Ø
bottom
mm
H
Øa
Bores
Unit
​
Ø
top
mm
Price
mm
mm
​
piece
EURO
40395
40396
40397
40398
40399
40400
40401
40402
40403
40404
40405
40406
40407
40408
40409
40410
40411
40412
40413
40414
40415
40416
40417
40418
40419
40420
40421
40422
40423
40424
40425
40426
40427
40428
40429
40430
40431
40432
40433
40434
6.5
9
12
14.5
14.5
16.5
16.5
18
18
18
22
22
22
24
24
24
27
27
27
29
29
29
32
32
32
35
35
35
38
38
38
44
49
55
59.5
65
70
75.5
83
92
3.5
5
7
10.5
10.5
12.5
12.5
14
14
14
17
17
17
18
18
18
21
21
21
23
23
23
26
26
26
29
29
29
31
31
31
36
41
47
50.5
56
60
64.5
71
79
15
20
20
20
20
20
20
20
20
20
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
40
40
40
45
45
50
55
60
65
​
​
​
​
3
​
3
​
3
3
​
4
4
​
4
4
​
​
​
​
5
5
​
6
6
​
6
6
​
7
7
​
​
​
​
​
​
​
​
​
​
​
​
​
1
​
1
​
1
2
​
1
2
​
1
2
​
1
2
​
1
2
​
1
2
​
1
2
​
1
2
​
​
​
​
​
​
​
​
​
50
50
50
50
40
40
40
40
30
30
20
20
20
15
15
15
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
3
3
2
2
2
1
1
1
1
31.00
40.00
49.00
76.00
72.00
79.00
93.00
97.00
81.00
108.00
88.00
108.00
108.00
81.00
94.00
94.00
72.00
75.00
77.00
77.00
90.00
90.00
91.00
91.00
91.00
63.00
67.00
67.00
69.00
72.00
76.00
59.00
72.00
68.00
81.00
99.00
76.00
81.00
106.00
130.00
THOMAPLAST® I - 2015 47
Laboratory Plastics - Laboratory Stoppers
Item
Laboratory Stoppers and Caps
Ø
bottom
mm
H
Øa
Bores
Unit
​
Ø
top
mm
Price
Item
mm
mm
​
40435
40436
100
107
87
94
65
65
​
​
​
​
piece
EURO
1
1
152.00
171.00
THOMAPLAST®-High-Pharm Stopper
made of Silicone for the Food Processing Technology
and Pharmaceutical Engineering
Application area
•Biotechnology, pharmaceutical engineering, food processing technology, wine business, beverage industry, dairy industry, container
technology, laboratory technology
Technical specification
•Material: silicone (silicone rubber)
•Colour: translucent
•Shore hardness A: 50° ±5°
•Temperature range: -60 to +200 °C, for a short period +230 °C
•Sterilization: autoclavable (+136 °C)
•Tolerance: according to DIN 7715 T2 M3
•Regulations: FDA §177.2600 and BfR XV silicone
​
Item
Ø
bottom
mm
H
Øa
Bores
Unit
​
Ø
top
mm
mm
mm
​
piece
EURO
302535
302536
302537
302538
302539
302540
302541
302542
302543
302544
302545
302546
302547
302548
302549
302550
302551
302552
302553
302554
302555
302556
6
6
8
8
9
9
12
12
14.5
14.5
16.5
16.5
18
18
18
18
22
22
22
22
24
24
3
3
4
4
5
5
8
8
10.5
10.5
12.5
12.5
14
14
14
14
17
17
17
17
18
18
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
30
30
​
​
​
​
​
​
​
​
3
3
3
3
3
3
3
3
4
4
4
4
4
4
​
​
​
​
​
​
​
​
1
1
1
1
1
1
2
2
1
1
2
2
1
1
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
30.00
40.00
30.00
40.00
32.00
42.00
40.00
52.00
46.00
60.00
54.00
74.00
68.00
92.00
68.00
92.00
100.00
144.00
100.00
144.00
132.00
192.00
48 THOMAPLAST® I - 2015
Price
Ø
bottom
mm
H
Øa
​
Ø
top
mm
Bores
Unit
mm
302557
302558
302559
302560
302561
302562
302563
302564
302565
302566
302567
302568
302569
302570
302571
302572
302573
302574
302575
302576
302577
302578
302579
302580
302581
302582
302583
302584
302585
302586
302587
302588
302589
302590
302591
302592
302593
302594
302595
302596
302597
302598
302599
302600
302601
302602
302603
302604
302605
302606
24
24
27
27
27
27
29
29
29
29
32
32
32
32
35
35
35
35
38
38
38
38
41
41
44
44
49
49
55
55
59.5
59.5
65
65
70
70
75.5
75.5
83
83
92
92
100
100
107
107
130
130
170
170
18
18
21
21
21
21
23
23
23
23
26
26
26
26
29
29
29
29
31
31
31
31
34
34
36
36
41
41
47
47
50.5
50.5
56
56
60
60
64.5
64.5
71
71
79
79
87
87
94
94
100
100
120
120
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
40
40
40
40
40
40
45
45
45
45
50
50
55
55
60
60
65
65
65
65
65
65
85
85
130
130
Price
mm
​
piece
EURO
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
10
20
10
20
5
10
5
10
5
10
5
10
3
5
3
5
1
3
1
3
1
3
1
3
1
3
1
3
132.00
192.00
170.00
246.00
170.00
246.00
138.00
202.00
138.00
202.00
164.00
278.00
164.00
278.00
148.00
220.00
148.00
220.00
196.00
294.00
196.00
294.00
118.00
170.00
132.00
192.00
80.00
116.00
106.00
160.00
142.00
205.00
184.00
264.00
155.00
180.00
162.00
193.00
56.00
134.00
77.00
184.00
94.00
248.00
129.00
328.00
194.00
543.00
347.00
925.00
Laboratory Plastics - Laboratory Stoppers
Laboratory Stoppers and Caps
THOMAPLAST®-High-Pure-Stopper made of Silicone platinum cross-linked
THOMAPLAST®-Silicone Sponge Stoppers
Application area
•A high-performance silicone sponge stopper with outstanding porosity,
as a replacement for the conventional cotton stoppers.
•The stopper can be sterilized 300 times at +180 °C for 10 hours due
to its outstanding heat resistance and allows half the evaporation
associated with regular cotton stoppers.
•Silicone sponge stoppers are not hygroscopic, thus preventing a contamination by the growth of microorganisms on or in the stopper.
•Pharmaceutical technology, biotechnology, food industry, medical
sector, beverage industry
Product specification
•Very good biological compatibility
•Non-toxic, free from pyrogenes
•Resistant to high temperature
•Suitable for food contact applications
•Absolutely odourless and tasteless
Product specification
​
Item
​
954791
954801
Technical specification
•Material: silicone (silicone rubber), platinum-catalyzed and free of peroxides
•Colour: translucent
•Shore hardness A: 45 °
•Temperature range: -60 to + 200 °C
•Sterilization: autoclavable (+136 °C)
•Tolerance: according to DIN 7715 T2 M3
•Regulations: conforming to FDA acc. to §177.2600 (USA), booklet
No. 1227, 1980 „Décrets et circulaires du Ministère de l`Agriculture“
(France) and BS 6920-WRc Water Byelaws Scheme-(UK)
•Migration: according to the standards established by the directive
CEE 20/128, 93/128 and 93/9
​
Ø top
mm
Ø bottom
mm
Unit
piece
Price
EURO
23
30
21
23
1
1
16.00
20.00
THOMAPLAST®-High-Chem Stopper made of FPM
Application area
•Laboratory technology, chemical technology, sealing technique,
container technology, automobile industry, engineering operations and
maintenance
Product specification
•Highest temperature resistance
•Outstanding chemical resistance, particularly to aliphatic, aromatic and
halogen-substituted hydrocarbons, fuels, oils, fats, hydraulic fluids,
alkohols and acids
•Very good heat resistance
•Resistant to effects of ozone, aging, and weather
•Flame-resistant
•Highest mechanical strength
Technical specification
Item
​
340909
340910
340911
340912
340913
340914
340915
340916
340917
340918
340919
340920
340921
340922
340923
340924
340925
340926
340927
340928
340929
340930
Ø top
mm
Ø bottom
mm
Height
mm
Unit
piece
Price
EURO
29
29
31
31
33
33
35
35
38
38
42
42
45
45
49
49
55
55
60
60
66
66
24
24
25
25
28
28
30
30
32
32
35
35
37
37
42
42
45
45
51
51
56
56
30
30
34
34
34
34
38
38
38
38
42
42
45
45
49
49
48
48
51
51
55
55
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
72.00
122.00
80.00
134.00
88.00
144.00
96.00
162.00
106.00
178.00
110.00
182.00
124.00
202.00
140.00
224.00
164.00
258.00
208.00
326.00
256.00
384.00
•Material: FPM (fluorinated rubber)
•Colour: green
•Shore hardness A: 75°
•Temperature range: -55 to +200 °C, for a short time up to +315 °C
•Sterilization: autoclavable (+136 °C)
•Tolerance: according to DIN 7715 T2 M3
​
Item
​
340873
340874
340875
340876
340877
340878
340879
340880
340881
Ø top
mm
Ø bottom
mm
Height
mm
Unit
piece
Price
EURO
7
7
10
10
12
12
14
14
15
3
3
6
6
9
9
10
10
12
19
19
17.5
17.5
19
19
19
19
19
5
15
5
15
5
15
5
15
5
26.00
66.00
52.00
128.00
66.00
160.00
70.00
174.00
88.00
THOMAPLAST® I - 2015 49
​Laboratory Plastics - Laboratory Caps
Item
​
340882
340883
340884
340885
340886
340887
340888
340889
340890
340891
340892
340893
340894
340895
340896
340897
340898
340899
340900
340901
340902
340903
340904
340905
340906
340907
340908
Laboratory Stoppers and Caps
Ø top
mm
Ø bottom
mm
Height
mm
Unit
piece
Price
EURO
15
16
16
17
17
19
19
21
21
23
23
26
26
29
29
32
32
34
34
37
37
40
40
43
43
49
49
12
13
13
14
14
16
16
18
18
19
19
22
22
24
24
26
26
28
28
31
31
34
34
36
36
40
40
19
21
21
21
21
23
23
25
25
28
28
30
30
32
32
34
34
36
36
41
41
43
43
45
45
49
49
15
5
15
5
15
5
15
5
15
2
5
2
5
2
5
1
2
1
2
1
2
1
2
1
2
1
2
216.00
94.00
228.00
122.00
282.00
156.00
242.00
174.00
272.00
110.00
204.00
154.00
298.00
176.00
344.00
124.00
198.00
146.00
228.00
168.00
264.00
182.00
280.00
240.00
372.00
286.00
438.00
Laboratory Caps
THOMAPLAST -Protective Cap made of Silicone
®
Product specification
•Translucent protective caps made of silicone.
•The caps are optimally suitable for protection of pipe and tubing ends
or for protecting protruding, cylindrical-shaped parts during transport
and all procedures that require the protection of openings (protection
against knocks, splashes and dye).
•The size given corresponds to the external diameter of the vessel to
be capped in mm.
Item
​
Inside Ø
mm
Unit
piece
Price
EURO
12
14
16
18
20
22
25
30
35
42
45
50
5
5
5
5
5
5
5
5
3
2
2
2
23.00
30.00
30.00
31.00
40.00
45.00
46.00
59.00
48.00
60.00
70.00
92.00
40852
40854
40856
40858
40860
40861
40863
40866
40868
40872
40873
40875
THOMAPLAST®-Test Tube Cap made of Aluminium with handle
Application area
•For sterile but not hermetic closing of test tubes, particularly of culture tubes; may replace the plug of cotton wool in the bacteriological
laboratory.
Technical specification
•Material:
Cap: aluminum, coloured anodized, anodically oxidized,
absolutely rust-free
Special clamping spring: chromium-nickel-steel
​
Technical specification
•Material: silicone (silicone rubber)
•Crosslinking: peroxide
•Colour: translucent
•Temperature range: -50 to +200 °C, for a short time +250 °C
•Density: 1.15 ±0.03 g/cm3
•Shore hardness A: 62° ±5°
•Elongation at break: 270 %
•Tensile strength: 7.5 Mpa
•Regulations: FDA §177.2600 and BfR XV silicone
​
50 THOMAPLAST® I - 2015
Item
​
73549
73573
73597
73600
73603
73606
Inside
Ø
mm
Wall
thickness
mm
Colour
Unit
Price
​
piece
EURO
12
14
15
15
15
15
0.5
0.5
0.5
0.5
0.5
0.5
silver
silver
silver
blue
red
yellow
20
20
20
20
20
20
40.00
42.00
44.00
44.00
44.00
44.00
Laboratory Plastics - Laboratory Caps
Item
​
73609
73621
73624
73627
73630
73633
73645
73648
73651
73654
73657
73660
73663
73666
Laboratory Stoppers and Caps
Inside
Ø
mm
Wall
thickness
mm
Colour
Unit
Price
​
piece
EURO
15
17
17
17
17
17
19
19
19
19
19
19
19
19
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
green
silver
blue
red
yellow
green
silver
blue
red
yellow
green
brown
violet
black
20
20
20
20
20
20
20
20
20
20
20
20
20
20
44.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
46.00
THOMAPLAST®-Test Tube Cap made of Aluminium with claw
Application area
•For sterile but not hermetic closing of test tubes, particularly of culture
tubes; may replace the plug of cotton wool in the bacteriological
laboratory.
Technical specification
•Material:
Cap: aluminum, coloured anodized, anodically oxidized,
absolutely rust-free
Retaining clips: chromium-nickel-steel
Laboratory Semifinished Products
and Aids
THOMAPLAST®-Glass Fibre Wool GW1A and GW2A
Product specification
•The Microlith filter wool is available in two qualities.
•Both types withstand temperatures of +450 °C and +500 °C resp.
for longer time periods. Type GW2A is steam-sterilizable without
problems.
•Both types are resistant to acids, alkalis, organic solvents as well as
aerosols.
•Variations of air humidity have an imperceptible influence on the
weight as glass fibre wool is not hygroscopic and does not stretch or
swell.
•Insensitive to microorganisms. Usable in medicine, pharmacy and
bacteriology. Also suited for use in sterile filter applications when the
rare fibre preparations are removed before.
•High retention capacity.
Technical specification
•Hydrolysis class (DIN 12111): 3 (GW1A); 1 (GW2A)
•Acid class (DIN 12116): 2
•Alkali class (DIN 52322): 2
•Average fibre diameter: 10 - 11
•Density: 2.52 g/cm3 (GW1A); 2.39 g/cm3 (GW2A)
•Max. fibre preparation: 0.1 % (based on synthetic fats)
•Transformation temperature: +510 °C (GW1A); +557 °C (GW2A)
•Softening point: +720 °C (GW1A); +783 °C (GW2A)
​
​
Item
​
Item
​
73026
73068
73074
73080
73122
73191
73197
73215
Inside Ø
Colour
Unit
mm
Wall
thickness
mm
​
piece
EURO
12
15
15
15
17
24
24
28
0.5
0.5
0.5
0.5
0.5
1
1
1
red
silver
red
green
red
blue
yellow
blue
20
20
20
20
20
20
20
20
22.00
24.00
24.00
24.00
24.00
36.00
36.00
42.00
71314
71315
71316
71317
71318
71319
Price
Type
​
Unit
g
Price
EURO
GW 1 A
GW 1 A
GW 1 A
GW 2 A
GW 2 A
GW 2 A
10
30
50
10
30
50
16.00
23.00
31.00
20.00
35.00
44.00
THOMAPLAST®-Boiling Stones made of PTFE
Product specification
•Highly resistant product withstanding hot acids and alkalis, hydro­
carbons, ketones, esters and alcohols in every concentration.
•Prevent splashes and production of bubbles during boiling. Packed in
resealable bag.
•Highly active and durable
•Temperature resistance: -200 to +250 °C
​
THOMAPLAST® I - 2015 51
Laboratory Plastics
Item
​
Laboratory Semifinished Products and Aids
Particle size
mm
Unit
g
Price
EURO
4
450
202.00
60261
Item
​
40276
40277
40278
40279
THOMAPLAST®-Balls made of PTFE
Size
​
Volume
ml
Unit
piece
Price
EURO
3
3
5
5
65
65
102
102
3
5
3
5
48.00
57.00
54.00
65.00
Product specification
•For distillation columns
•High resistance to fluids and vapours
•Usable up to +288 °C
THOMAPLAST®-Double Blowing Bulb
made of PVC/NR with Net
​
Product specification
•Double blowing bulb with two working bulbs, made of two different
materials: polyvinylchloride (plasticized PVC) and black natural rubber
(NR).
​
Item
​
Outside Ø
mm
Unit
piece
Price
EURO
3
6
9
15
50
50
50
50
55.00
100.00
175.00
198.00
60287
60288
60289
60290
40280
40281
40282
THOMAPLAST -Powder made of PTFE
®
Product specification
•An odourless, dry powder made of PTFE
•It sticks electrostatically and can be polished to a permanently dry
lubricating film.
•Suitable for metal, wood, plastics, leather, ceramic etc.
​
Item
​
Unit
g
Price
EURO
60386
100
100.00
THOMAPLAST®-Blowing Bulb made of PVC
Product specification
•Blowing bulb made of red-brown polyvinylchlorid (plasticized PVC)
​
52 THOMAPLAST® I - 2015
Item
​
Size
​
Volume
ml
Unit
piece
Price
EURO
5
5
5
102
102
102
1
3
5
24.00
55.00
80.00
THOMAPLAST®-Standard Marker
Laboratory Plastics
Protection und Packaging
Product specification
•For direct marking of glass, porcelain, plastics, stainless steel, nonferrous metals.
•Marks dry, humid as well as cold surfaces.
•After marking immediately wipe-resistant and waterproof, but can be
rubbed off mechanically.
​
Item
​
Colour
​
Design
​
Unit
piece
Price
EURO
40149
40150
40153
40154
40155
40156
40158
40159
40160
black
red
black
red
blue
green
red
blue
green
extra fine
extra fine
fine
fine
fine
fine
wide
wide
wide
3
3
3
3
3
3
3
3
3
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
Protection
Product specification
•Abrasion-resistant bench liners for electronic workplaces made of
soldering tin-resistant, volume conductive 2-layer composite synthetic
rubber, complete with cable lug/banana plug adapter and push-button
connection for earth wires. Porefree, dust- and dirt-repellent surfaces,
non-deforming; in three different optically convenient and dazzlingpoor dyeings.
Technical specification
•Dimensions: 610 x 900 mm
•Material thickness: 2 mm
•Leakage resistance: 105 - 107 Ohm (DIN 51953)
•Volume resistivity: 105 - 107 Ohm (NFPA 99 56A)
•Surface resistance: 105 - 2 x 107 Ohm (NFPA 99 56A)
•Decay time: from 5000 V to 500 V 0.009 sec.;
from 5000 V to 50 V 0.034 sec.
Item
​
45726
45727
45728
Colour
​
Unit
piece
Price
EURO
beige
platinium grey
verdigris
1
1
1
123.00
123.00
123.00
THOMAPLAST®-Dycem®-Antislip Sheeting
THOMAPLAST -Lab Mat made of PTFE
®
Product specification
Product specification
•Made of pure PTFE with diamond-shaped mesh pattern; thickness approx. 1.6 mm, holes approx. 6 mm. Usable for elastic lining of shelves,
fume hoods, sinks, cooling apparatuses, and as mesh for parts being
submerged in etching chemicals and solutions.
•The material does not absorb chemicals and odors, does not embrittle,
is weakly reactive and resistant to chemicals, and easily cut to every
desired size.
•A new material made on PVC base with amazing features.
THOMAPLAST®-antislip sheeting is adhesive without sticking. A
non-slip, vibration damping pad for vibrating and rotating devices, as
bench liners, as working support for handling with smallest precision
mechanical parts.
​
​
Item
​
Item
​
60278
Width
mm
Length
m
Unit
piece
Price
EURO
300
3
1
502.00
THOMAPLAST®-ANTISTA EGB/ESG Bench Liner
​
952311
952321
952331
952341
952351
952361
952371
952401
953211
953221
953241
953261
952271
Width
mm
Length
m
Colour
​
Unit
piece
Price
EURO
200
200
200
200
200
400
400
400
200
200
200
400
400
2
2
2
2
2
2
2
2
9
9
9
9
9
blue
red
yellow
green
white
blue
red
white
blue
red
green
blue
red
1
1
1
1
1
1
1
1
1
1
1
1
1
72.00
72.00
72.00
72.00
72.00
121.00
121.00
121.00
264.00
264.00
264.00
371.00
371.00
THOMAPLAST® I - 2015 53
Laboratory Plastics
Protection und Packaging
THOMAPLAST®-Flask Lead Weight Ring
THOMAPLAST®-Service Case for Engineers
Application area
Product specification
•Weighting of freestanding glassware such as Erlenmeyer flasks, boiling
bottles etc. in water baths to increase stability and to prevent chipping.
Product specification
•Lead rings with extra strong, chemical-resistant and bright-red dyed
polyvinyl coating in different sizes for flasks up to 4 litres capacity.
​
Item
Ø ring
​
Rec. flask
size
l
Weight
Unit
83266
83267
83268
83269
0.25 - 0.5
0.25 - 1
0.5 - 2
1-4
Price
mm
g
piece
EURO
48
56
61
74
227
454
681
908
1
1
1
1
39.00
39.00
44.00
49.00
Laboratory Equipment and Utensils
•Black grained leather case with all-round zip fastener, inside lined
with black plastic plates. The set contains 22 important RCT®-tools for
service work
•Content service-case:
Ying glass: 30 mm Ø; 5 x magnification
Side cutters: 120 mm, for hard wire up to 0.8 mm, for soft wire up to
1.5 mm, chrome-plated
Snipe nose pliers: 140 mm, angular, with long jaws, slim model, with
compression spring, chrome-plated
Water pump pliers: 130 mm, chrome-plated
Screwdriver DIN 5265: 100 x 4 mm, blade made from chrome vanadium, chrome-plated, with black tip
Cross-recess screwdriver Pozidriv: blade made from chrome vanadium, with black tip, size 0 (length 60 mm), size 2 (lenght 100 mm)
Screwdriver for grub screws: with plastic handle, blade made from
chrome vanadium, nickel-plated, 80 x 2.8 mm
Assembly screwdriver: nickel-plated blade, 45 x 6 mm
with special square pattern BERNSTEIN handle
Watchmaker‘s screwdriver: nickel-plated, with 4 interchangeable
blades 1.5, 2.0, 2.5 and 3.0 mm
Steel tweezers: nickel-plated, with bent tips (150 mm), straight (145 mm)
Contact file: 150 mm
Special sheet-metal scissors: serrated, extremely slim, 110 mm,
nickel-plated
Wrench key: special steel, nickel-plated, WAF 2.0, WAF 2.5, WAF 3.0,
WAF 3.5
Torx-wrench key: with bore hole, chrome vanadium, burnished, T 10,
T 15, T 20
Gas-soldering-iron Portasol: 10 - 60 W, max. temperature up to 450° C
​
THOMAPLAST®-Cuvette Washer made of PP
Product specification
•Rinses and dries glass or quartz cuvettes without danger of damage.
Holding the cuvette with the open end downwards, it is pressed
against a soft rubber pad thereby closing the vacuum system. When
poured into the funnel the washing liquid sprays as sharp jet into the
cuvette and runs into the suction bottle. Using acetone for the last
washing run and blowing air for some seconds results in perfectly
clean and dry cuvettes. Minimum cuvette I.D must be 9 mm or larger
to form a seal over the spray nozzle.
•Includes 500 ml polypropylene vacuum flask and vinyl stopper with tubing.
•Accessories: Fitting NS stopper (standard ground joint stopper) made
of PP item 60670.
Item
​
71851
​
1
External dimensions
mm
Weight1
Unit
Price
kg
piece
EURO
245 x 130 x 60
1.1
1
360.00
with tools
THOMAPLAST®-Service Set
Product specification
Item
​
96790
Ø
funnel
mm
Volume
suction bottle
mm
Unit
Price
piece
EURO
89
500
1
228.00
54 THOMAPLAST® I - 2015
•Practical service case for the electronics engineer. Case with zip
fastener made from black imitation leather. The case contains 18
clearly arranged special tools. In addition to writing materials, the
writing case side has room in its 3 compartments for a writing block,
leaflets, technical documents etc. There is also a transparent window
for visiting cards or calendars and a pocket for small parts. Weight
with tools approx. 0.95 kg.
Outside dimensions (when closed) 320 x 230 x 30 mm.
​
Laboratory Plastics
Item
​
71849
Laboratory Equipment and Utensils
Unit
piece
Price
EURO
1
390.00
THOMAPLAST®-Clamping Vice
Item
​
83263
83264
Design
​
Unit
piece
Price
EURO
with support stand
without foot
1
1
318.00
131.00
THOMAPLAST®-Mini Sieve Set
Product specification
•RCT®-clamping vice with interchangeable screw-on work mounts.
Instead of the clamping device it is possible to place a circuit board
holder (clamping capacity 25 - 270 mm), a universal screw-on plate
with three fixing slots for bolts etc., and an angular adapter in order to
obtain a larger turning circle.
Technical specification
•Screw-on mounting vice:
Jaws: plastic
Clamping pressure: 150 kp
Clamping capacity: 70 mm
Clamping depth: 38 mm
Application area
•Particle size analysis.
•Particle size fractionating of small and smallest amounts of substances.
Product specification
•Stackable precision sieves for arranging of sieve combinations. True
to size interchangeable sieve segments with toollessly exchangeable
stable strainers of different mesh widths according to U.S. ASTMstandards, tightly closing cover and bottom receiver.
Technical specification
•Material: Sieve segments, cover, receiver and screw fitting for strainers: polypropylene; Strainers: phosphor bronze
•Content of supply standard set: 4 pieces of sieve segments with
screw fittings for strainers, 8 pieces of different strainers in meshdimensions, one cover and one bottom receiver
•Dimension:
Sieve segments: internal diameter 51 mm, external diameter 65 mm
Stainers: mesh widths 24; 35; 45; 60; 80; 120; 170, and 230 mesh
•Stacking height: 152 mm (standard set with 4 sieves, cover and
bottom receiver)
​
​
Item
​
71847
Unit
piece
Price
EURO
1
345.00
THOMAPLAST®-Flexi-Instrument Holder
Application area
•Positioning of small laboratory devices such as electrodes, measuring
magnifier and measuring telescopes, illumination of scales etc.
•Support stand in chemical and physical laboratories.
Product specification
Item
​
83261
Unit
set
Price
EURO
1
177.00
•Ball joint arm made of disruptively strong acetal resin segments
(„swanneck“) of approx. 46 cm length, bendable in any position, to
elongate or shorten by adding or removing of segments. With stainless
steel bolt (diameter 12.7 mm, length 19 mm) at the movable end for
fastening of device clamps etc. With suction stand or heavy support
stand for setting up.
​
THOMAPLAST® I - 2015 55
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
Item
Separation Technology - Filtration
Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
THOMAPOR®-Dialysing Tubing
made of Regenerated Cellulose - Standard
Application area
•Gentle desalination, purification and concentration of sensitive biological materials, such as sera, protein solutions, plant extracts
•Desalination of metal colloids.
•Purification of protein and nucleic acid fragments.
•Exchange of electrolytes in bioactive media.
•Growing of bacterial cultures.
•Depyrogenization of sensitive bioeffective systems.
Product specification
•High-tech dialysing tubing made of regenerated cellulose for overall
biological research, seamlessly manufactured, in rolls, made of clear
highly pure and molecular-porous membrane material, absolutely free
of traces of heavy metal and sulfur compounds, extremely low protein
absorption especially in a weakly acetous environment, narrow cut-off
ranges. Stabilized for storage with glycerol. For low and high-molecular systems with correspondingly defined cut-offs.
•Because of its glycerol content required for storage stability,
THOMAPOR®-dialysing tubing should be washed with water or diluted
acetic acid before use. For storage of unused dialysing tubing air-tight
containers are recommended which should be stored in the refrigerator. The tubing can be used in the pH range of 2 to 12 and at temperatures of +4 to +121 °C. The mentioned cut-offs are recommended
values. In case of uncertainty the suitability of a given dialysing tubing
has to be determined in preliminary tests, as the effective pore sizes of
the cellulose membrane material depend on several external physicochemical factors, e.g. the buffer composition.
​
Filtration
Cut off
​
Flat Filling Filling
width Ø
volume
kDalton mm mm ml/cm
50312
50313
50314
50315
50316
50317
50318
50319
50320
50321
50322
50323
50324
50325
50326
50327
50328
50329
45077
50331
45079
50332
50333
45081
50334
50335
50336
50337
50338
50339
50340
50341
50342
50343
50344
50345
50346
6-8
6-8
6-8
6-8
6-8
6-8
6-8
8
8
8
8
10
10
10
10
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
12 - 14
15
15
15
15
25
25
25
50
50
50
10
23
32
40
50
100
120
24
32
40
50
12
24
32
45
4
8
10
10
25
25
32
45
45
75
105
120
12
24
32
45
12
28
34
12
28
34
6.4
14.6
20.4
25.5
32
64
76
15
20.4
25.5
32
7.5
15
20.4
29
3
5
6.4
6.4
16
16
20.4
29
29
48
67
76
7.5
15
20.4
29
7.5
18
22
7.5
18
22
0.32
1.7
3.3
5.1
7.9
32
46
1.8
3.3
5.1
7.9
0.45
1.8
3.3
6.4
0.08
0.22
0.32
0.32
2
2
3.3
6.4
6.4
18
34
46
0.45
1.8
3.3
6.4
0.45
2.5
3.7
0.45
2.5
3.7
Design
Unit
Price
​
m
EURO
dry
dry
dry
dry
dry
dry
dry
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
dry
dry
dry
dry
dry
dry
dry
dry
dry
dry
dry
dry
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
15
660.00
30
660.00
30
660.00
30
690.00
30
720.00
15
660.00
15
780.00
10
660.00
10
660.00
10
660.00
10
660.00
10
660.00
10
660.00
10
660.00
10
660.00
2
228.00
2
228.00
15
660.00
30
708.00
15
440.00
30
708.00
15
560.00
15
440.00
30
708.00
15
440.00
15 1,440.00
15 1,440.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
10
675.00
THOMAPOR®-Dialysing Tubing made of Regenerated
Cellulose − Praktik
Item
​
50300
50301
50302
50303
50304
50305
50306
50307
50308
50309
50310
Cut off
Flat Filling Filling
width Ø
volume
kDalton mm mm ml/cm
1
1
1
1
2
2
2
2
3.5
3.5
3.5
12
18
38
45
12
18
38
45
18
45
54
8
11.5
24
29
8
11.5
24
29
11.5
29
34
56 THOMAPLAST® I - 2015
0.3
1.1
4.2
6.4
0.3
1.1
4.6
6.4
1.1
6.4
9.3
Design
Unit
Price
​
m
EURO
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
pre-wetted
dry
dry
dry
10
10
10
10
10
10
10
10
15
15
15
660.00
660.00
660.00
660.00
660.00
660.00
660.00
660.00
660.00
660.00
660.00
Application area
•Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates
•Dialysis of blood, protein solutions, and of other biocolloid systems.
•Desalination of metal colloids.
•Growing of bacterial cultures.
•Demonstration material for teaching and training.
Product specification
•Material: Seamlessly manufactured dialysing tubing made of regenerated cellulose.
•Features: Sterilization -wet or dry- up to +120 °C allowed. Do not dry
up the dialysing tubing without having treated it first with a diluted
glycerol solution.
•Average pore diameter: 15-20 Å
•MW cut-off: 10,000 to 20,000 dalton
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
•Biochemical analysis: Separation of low molecular and high molecular
proteins and nucleic acid fragments.
•Concentration: Solutions of biomolecules of a molecular weight
exceeding 12,000 - 15,000 can be concentrated quickly and gently by
suspending them in a 20 % solution of polyethylene glycol M 2000.
•Salt exchange: Solutions of high-molecular salts cannot only be
made free of the salt, but a new desired ionic environment can be
established by exchange.
​
Filtration
THOMAPOR®-High-Pure Dialysing Tubing
made of Regenerated Cellulose
Application area
•Gentle desalination, purification and concentration of heavy metalsensitive biological and physiological material under sterile conditions.
•Growing of bacterial cultures.
•Depyrogenization and sterilization of sensitive, bioeffective systems.
Product specification
Item
​
84577
84578
84579
84580
84581
84582
84583
84584
84585
84586
84588
84589
50352
50353
50354
50355
50357
50358
503591
50359
50360
50361
50362
50363
50364
50365
50366
50370
50372
50373
50374
Flat
width
mm
Filling
Ø
mm
Filling
volume
ml/cm
Unit
10
23
25
32
40
50
69
80
104
117
144
159
69
80
104
117
144
159
10
23
25
32
40
69
80
104
117
23
32
40
50
6
15
16
20
25
32
44
51
66
75
92
101
44
51
66
75
92
101
6
15
16
20
25
44
51
66
75
15
20
25
32
0.31
1.77
2.01
3.14
4.91
8.04
15.2
20.42
34.19
44.16
66.44
80.08
15.2
20.42
34.19
44.16
66.44
80.08
0.28
1.77
2.01
3.14
4.91
15.2
20.42
34.19
49.08
1.77
3.14
4.91
8.04
3
3
3
3
3
3
3
3
3
2
2
2
15.2
15.2
15.2
15.2
15.2
15.2
30.5
30.5
30.5
30.5
30.5
152.5
152.5
152.5
152.5
305
305
305
305
m
Price
EURO
66.00
66.00
66.00
66.00
66.00
66.00
66.00
66.00
66.00
81.00
81.00
81.00
154.00
154.00
187.00
226.00
262.00
280.00
263.00
270.00
286.00
306.00
306.00
958.00
1,164.00
1,304.00
1,499.00
1,702.00
1,874.00
1,442.00
2,633.00
•Highly purified, EDTA-washed dialysing tubing, free of traces of heavy
metals and sulfur components, radiation-sterilized. For low- and
high-molecular systems with narrowly defined cut-offs. Stabilized for
storage with 0.05 % sodium azide.
•The mentioned cut-offs are recommended values. In case of
uncertainty the suitability of a given THOMAPOR®-dialysing tubing CS
SHR high-pure quality has to be determined in preliminary tests, as
the effective pore sizes of the membrane material depend on several
external physico-chemical factors, e.g. the buffer composition.
•Because of its sodium benzoate content required for storage stability,
THOMAPOR®-Dialysing Tubing CS-SHR High-Pure should be washed
with water before use. Subsequent conditioning in dialysing buffer is
advisable.
Technical specification
•Material: regenerated cellulose
•Length: 5 m
​
Item
​
45087
45088
45089
45091
45092
45093
45094
45095
45096
45097
45098
45099
45100
45101
45102
45103
45104
45105
45106
45107
45108
45109
45110
45111
45112
45113
45114
45115
Cut off
Filling
Ø
mm
Filling
volume
ml/cm
Length
kDalton
Flat
width
mm
Price
m
EURO
1
1
1
2
2
2
3.5
3.5
3.5
8
8
8
8
8
10
10
10
10
15
15
15
15
25
25
25
50
50
50
18
38
45
18
38
45
18
45
54
12
24
32
40
50
12
24
32
45
12
24
32
45
12
28
34
12
28
34
11.5
24
29
11.5
24
29
11.5
24
29
7.5
15
20.4
25.5
32
7.5
15
20.4
29
7.5
15
20.4
29
7.5
18
22
7.5
18
22
1.1
4.6
6.4
1.1
4.6
6.4
1.1
6.4
9.3
0.45
1.8
3.3
5.1
7.9
0.45
1.8
3.3
6.4
0.45
1.8
3.3
6.4
0.45
2.5
3.7
0.45
2.5
3.7
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
530.00
THOMAPLAST® I - 2015 57
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
THOMAPOR®-Dialysing Tubing
made of Cellulose Hydrate − Standard
Item
​
Application area
50438
50439
50440
50441
50442
50443
50444
•Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates
•Dialysis of blood, protein solutions, and of other biocolloid systems.
•Desalination of metal colloids.
•Growing of bacterial cultures.
Product specification
•Seamlessly manufactured dialysing tubing made of purest cellulose
hydrate membrane material. Mean pore size 25 Angstrom, nominal
cut-off at MW 15,000 dalton. Laboratory-suitable supply length of 5 and 15 m/roll, graded flat widths between 24 mm and 180 mm.
Technical specification
•Diffusion permeability for salts: 2.8 x 10-4 cm x s-1; (pressureless
continuous-flow cell; 0.1 % aqueous urea solution at +20 °C)
•Mechanical permeability: 1.5 x 10-5 cm x s-1 bar-1;
(stirring cell 0.1 bar; water at +20 °C)
•Retention against dextran: 60 %
(1 % dextran solution MW 10,000; 0.1 bar)
​
Filtration
Flat
width
mm
Filling
Ø
mm
Filling
volume
ml/cm
Unit
Price
m
EURO
89
102
115
126
141
156
180
69
79
89
96
108
120
138
26.41
33.17
41.83
51.5
62.18
73.86
79.64
15
15
15
15
15
15
15
119.00
146.00
200.00
249.00
273.00
292.00
308.00
THOMAPOR®-Dialysing Tubing
made of Cellulose Hydrate − Rapid
Application area
•Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates
Product specification
•Seamlessly manufactured dialysing tubing made of purest cellulose
hydrate membrane material. Larger number density of pores and lower
wall thickness increase dialysing speed by 20 % and more compared
to standard qualities without loss of mechanical stability. Mean pore
size 25 Angstrom, nominal cut-off at MW 15,000 dalton. Laboratorysuitable supply length of 3 and 15 m/roll, graded flat widths between
4 mm and 148 mm.
Technical specification
Item
​
84597
84598
84599
84600
84602
84603
84604
84605
84607
84613
84608
84609
84610
84611
84612
50427
50428
50429
50430
50432
50433
50434
50435
50437
Flat
width
mm
Filling
Ø
mm
Filling
volume
ml/cm
Unit
m
EURO
24
32
34
40
49
53
58
66
80
89
102
115
126
141
156
24
32
34
40
49
53
58
66
80
16
21
22
28
34
40
45
50
60
69
79
89
122
138
153
16
21
22
28
34
40
45
50
60
2
3.46
4.15
4.9
7.54
9.07
10.75
12.56
19.62
26.41
33.17
41.83
51.5
62.18
73.86
2
3.46
4.15
4.9
7.54
9.07
10.75
12.56
19.62
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
15
15
15
15
15
15
15
15
15
43.00
43.00
43.00
47.00
54.00
57.00
57.00
57.00
57.00
57.00
60.00
94.00
99.00
111.00
118.00
94.00
94.00
94.00
110.00
128.00
107.00
107.00
107.00
113.00
58 THOMAPLAST® I - 2015
Price
•Diffusion permeability for salts: 4.2 x 10-4 cm x s-1; (pressureless
continuous-flow cell; 0.1 % aqueous urea solution at +20 °C)
•Mechanical permeability: 3.1 x 10-5 cm x s-1 bar-1;
(stirring cell 0.1 bar; water at +20 °C)
•Retention against dextran: 63 %
(1 % dextran solution, MW 10,000; 0.1 bar)
​
Item
​
84567
84568
84570
84571
84573
84574
84576
50445
50446
50447
50449
50450
50452
Flat
width
mm
Filling
Ø
mm
Filling
volume
ml/cm
Unit
Price
m
EURO
4
10
25
33
80
99
148
10
25
33
80
99
148
2.6
6
12
19
51
63
94
6
12
19
51
63
94
0.05
0.31
1.13
2.83
20.42
31.16
69.36
0.28
1.13
2.83
20.42
31.16
69.36
3
3
3
3
3
3
3
15
15
15
15
15
15
62.00
62.00
55.00
55.00
65.00
83.00
99.00
234.00
208.00
208.00
241.00
292.00
386.00
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
THOMAPOR®-Dialysing Tubing made of Cellulose Ester
Item
Application area
​
•Gentle desalination, purification and concentration of sensitive biological materials, such as sera, protein solutions, plant extracts
•Desalination of metal colloids.
•Purification of protein and nucleic acid fragments.
•Exchange of electrolytes in bioactive media.
•Growing of bacterial cultures.
•Depyrogenization of sensitive bioeffective systems.
45019
45068
45020
45021
45022
45023
45024
45025
45026
45027
45028
45074
Product specification
•High-tech dialysing tubing for overall biological research, seamlessly
manufactured, in rolls, made of clear highly pure and molecular-porous
membrane material, absolutely free of traces of heavy metal and
sulfur compounds, extremely low protein absorption. For low and highmolecular systems with correspondingly defined cut-offs.
Cut off
Filtration
Filling
Ø
mm
Volume
Length
kDalton
Flat
width
mm
Price
ml/cm
m
EURO
20
25
50
50
50
50
100
100
100
100
300
1000
31
12
10
16
24
31
10
16
24
31
16
16
20
7.7
6.4
10
15
20
6.4
10
15
20
10
10
3.1
0.38
0.32
0.79
1.8
3.1
0.32
0.79
1.8
3.1
0.79
0.79
10
10
10
10
10
10
10
10
10
10
10
10
790.00
675.00
575.00
658.00
754.00
790.00
575.00
658.00
754.00
790.00
658.00
658.00
Technical specification
•Material: cellulose ester, hydrophilic, symmetric porosity
•pH range: 2 to 9
•Max. temperature: +37 °C (recommended)
•Storage: wet, with 0.05 % sodium azide
THOMAPOR®-Dialysing Mini Tubing Chamber
made of Cellulose Ester
Product specification
​
•Dialysing tubing made of sulfur- and heavy metal-free cellulose ester
(CE) with integrated end pieces; one side with a flared screw cap for
filling without material loss, the other side with a weighted sealing
piece for safe balance in the dialysing vessel. Graduated laboratoryoriented cut-offs (MWCO) between 100 and 300,000 dalton, for
dialysis of volumes up to 10 ml; diameter 10 mm, sterile packaged
for the immediate use in dialysing vessels preferably in THOMAPOR®dialysing cylinders, items 58718 and 58758.
​
Item
Cut off
​
kDalton
Flat
width
mm
45000
45001
45002
45003
45034
45004
45036
45005
45006
45007
45040
45046
45008
45009
45010
45011
45012
45013
45014
45015
45061
45016
45017
45018
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.5
0.5 - 1
0.5
0.5 - 1
0.5 - 1
0.5 - 1
1
3.5
3.5 - 5
3.5 - 5
3.5 - 5
3.5 - 5
8 - 10
8 - 10
8 - 10
8 - 10
10
20
20
20
10
16
24
31
8
10
12
16
24
31
12
8
10
16
24
31
10
16
24
31
16
10
16
24
Filling
Ø
mm
Volume
Length
Price
ml/cm
m
EURO
6.4
10
15
20
5.1
6.4
7.7
10
15
20
7.7
5.1
6.4
10
15
20
6.4
10
15
20
10
6.4
10
15
0.32
0.79
1.8
3.1
0.26
0.32
0.38
0.79
1.8
3.1
0.38
0.26
0.32
0.79
1.8
3.1
0.32
0.79
1.8
3.1
0.79
0.32
0.79
1.8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
575.00
658.00
754.00
790.00
630.00
575.00
675.00
658.00
754.00
790.00
675.00
630.00
575.00
658.00
754.00
790.00
575.00
658.00
754.00
790.00
715.00
575.00
658.00
754.00
Item
Cut off
Volume
Length
Unit
ml
Outside
Ø
mm
​
kDalton
58719
58721
58723
58726
58727
58729
58730
58731
58732
58734
58736
58738
58740
58742
58743
58744
0.1 - 0.5
0.5 - 1
3.5 - 5
8 - 10
20
50
100
300
0.1 - 0.5
0.5 - 1
3.5 - 5
8 - 10
20
50
100
300
Price
mm
piece
EURO
1
1
1
1
1
1
1
1
5
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
320.00
320.00
320.00
320.00
320.00
320.00
320.00
320.00
350.00
350.00
350.00
350.00
350.00
350.00
350.00
350.00
THOMAPLAST® I - 2015 59
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
Item
Cut off
Volume
Length
Unit
Price
ml
Outside
Ø
mm
​
kDalton
mm
piece
EURO
58745
58747
58749
58752
58753
58755
58756
58757
0.1 - 0.5
0.5 - 1
3.5 - 5
8 - 10
20
50
100
300
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
160
160
160
160
160
160
160
160
12
12
12
12
12
12
12
12
370.00
370.00
370.00
370.00
370.00
370.00
370.00
370.00
THOMAPOR®-Dialysing Cylinder
Product specification
•Cylindrical vessel for the rapid routine dialysis with dialysing tubing,
made of glass-clear, bioinert plastic material, free of leachable components; with tight-closing cover and strong 40 mm magnetic stirring
bar. Flat bottom for putting on magnetic stirrers; excellently suited for
all THOMAPOR®-dialysing mini tubing chambers made of cellulose
ester, items 58719 to 58757; two laboratory-oriented sizes.
Filtration
THOMAPOR®-Dialysing Tubing Closure Clamp
made of PP
​
Item
​
for max. flat width
mm
Unit
piece
Price
EURO
17
42
72
95
180
5
5
5
5
5
40.00
45.00
55.00
61.00
66.00
84564
84565
84590
84594
84595
​
THOMAPOR®-Dialysing Tubing Clip made of PP
Product specification
•Polypropylene clip closes dialysing tubing reliably without damaging it.
​
Item
​
58718
58758
Volume
ml
Height
mm
Outside Ø
mm
Unit
piece
Price
EURO
750
1,000
105
175
107
110
1
1
150.00
150.00
THOMAPOR®-Closure Clamp made of PP
for Dialysing Tubing
General product specification
•Clamp system for safe and gentle closure of dialysing tubing of all dimensions and types, made of physiologically safe and chemically inert
polypropylene (white). To be opened at any time without problems and
reusable many times. Chemically sterilizable, autoclavable at +121 °C.
•Two-part closure system, consisting of a resilient clamp with integral
pressure ribs and fitted in round shaped rod. Four standard sizes for
dialysing tubing with flat widths up to 17, 42, 72, 95, and 180 mm.
•The end of the dialysing tubing to be sealed is fixed with one hand
over the opening of the clamp in such a way that it projects approx. 10 mm. Then the round shaped rod is pressed into the clamp.
​
60 THOMAPLAST® I - 2015
Item
​
94541
94542
94543
Length
mm
Unit
piece
Price
EURO
12
35
75
10
10
10
112.00
92.00
118.00
THOMAPOR®-Dialysing Tubing Opener
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder
Product specification
•For single use. Angled plastic piece with self-adhesive spots. When
the tubing opener is pressed together over the tubing end, the
opening is drawn open. It can be left at the tubing during filling it with
liquid. When the tubing gets wet, the adhesive force of the opener
extinguishes.
​
Item
​
Number of adhesive spots
​
Unit
piece
Price
EURO
2
100
132.00
94540
THOMAPOR®-Dialysing Tubing Filler Funnel
made of PP
Product specification
•Dialysing tubing filler funnel with graded adapter for slipping of
dialysing tubing of different diameters.
•Dialysing tubing is individually cut to length, slipped over the adapter
and tightly fixed with a rubber band.
•The filler funnel is now hanged at the edge of the container.
•The closure cap can be marked. The funnel is sterilizable with steam
at +121 °C.
​
Filtration
Anion-Exchange Membranes and
Cation-Exchange Membranes
THOMAPOR®-Ion-Exchange Membrane
for Electrodialysis - PVC-reinforced
Product specification
•Ion-exchange membranes made of polystyrene reinforced with PVC
•Low electrical resistance
•Electrodialysis membranes have always to be kept wet and should be
stored in a 3 % NaCl solution in a cool and dark place.
•Chemical resistance:
Resistant to acids, alkalis and inorganic salt solutions; otherwise all
properties as polystyrene.
Good resistance to reducing agents. Permanent operation with
oxidants reduces stability.
Technical specification
•Thickness: CEM: 0.15 - 0.17 mm; AEM: 0.11 - 0.14 mm
•Tearing strength: CEM: 3 - 4 kg/cm2; AEM: 4 - 7 kg/cm2
•Resistivity: CEM: 2.7 - 3.2 Ohm/cm2; AEM: 3.0 - 4.5 Ohm/cm2
•Transport number t+: CEM: 0.7 (K+Na+); AEM: 0.02
•Transport number t++: CEM: 0.28 (Ca++Mg++); AEM: 0.02
•Transport number t-: CEM: 0.02 (CI-); AEM: 0.94 - 0.96
•Transport number t--: CEM: 0.02 (SO42-); AEM: 0.94 - 0.96
•Exchange capacity: CEM: 1.5 meq/g; AEM: 1.8 meq/g
•Chemical form: CEM: Na; AEM: CI
•Max. temperature: +40 °C, for a short time +60 °C
​
Item
​
For tubing inside Ø
mm
Unit
piece
Price
EURO
5 - 13
14 - 28
5
5
46.00
54.00
12301
12302
Item
​
Design
​
Dimensions
mm
Unit
piece
Price
EURO
553281
55329
Anion
Cation
500 x 500
500 x 500
1
1
317.00
317.00
THOMAPOR®-Anion-Exchange Membrane
for Electrodialysis - dry storage
Application area
THOMAPOR®-Holding Ring for Dialysing Membranes
Product specification
•Hold membranes of varying sizes necessary for dialysis or concentration purposes.
•Double rings made of plastic which are adjusted in such a way that
they can hold membranes of any size.
​
•Desalination of sea water or brackish water
•Preparation of sugar solution, whey and other aqueous and nonaqueous solutions containing ions.
•Purification of soiled pickling bathes
•Chlorine production
•Electrolytic synthesis of periodic acid and other chemicals
Product specification
•The membranes are supplied dry and should be stored at a dark place
(max. +15 °C). Only for activation they have to be loaded in a 10% salt
solution at +55 °C for at least 3 hours
•Chemical stability MA-3475:
Good chemical stability in neutral solutions, in acid solutions (ph 0-7)
and in alkaline solutions (ph 7-9)
Fair chemical stability in alkaline solutions (ph 9-14)
Poor chemical stability to mild oxidizing agents and to reducing agents
•Chemical stability MA-3512 (at +60 °C):
H2SO4 up to 5 %, HCI and NaOH up to 4 %
Item
​
50458
50459
Outside Ø
mm
Unit
piece
Price
EURO
100
125
2
2
36.00
36.00
THOMAPLAST® I - 2015 61
Separation Technology - Anion-Exchange Membranes and Cation-Exchange Membranes
Technical specification
•Electrical resistance:
MA-3475: 24 Ohm/cm2 (0.1 N NaCI); 8 Ohm/cm2 (1.0 N NaCI)
MA-3512: 14 Ohm/cm2 (0.1 N NaCI); 4 Ohm/cm2 (1.0 N NaCI)
•Permeability: 75.0 % (0.5 N NaCI/1.0 N NaCI)
•Water permeability: <3.2 ml/h/dm2 (at 0.35 kg/cm2)
•Pressure resistance:
MA-3475: min. 14 kg/cm2
MA-3512: min. 12 kg/cm2
•Thickness:
MA-3475: approx. 0.40 mm
MA-3512: approx. 0.15 mm
•Density:
MA-3475: approx. 405 g/m3
MA-3512: approx. 187 g/m3
•Capacity: 0.70 meq/g
•Max. temperature: +95 °C
•Dimensional stability: wet: excellent; dry: good
•Regulations: Approvals of the Food Additives Regulations § 121.2593
Filtration
Technical specification
•Electrical resistance: 15 Ohm/cm2 (0.1 N NaCI); 6 Ohm/cm2 (1.0 N NaCI)
•Permeability: 96 % (0.5 N NaCI/1.0 N NaCI)
•Water permeability: <3.2 ml/h/dm2 (at 0.35 kg/cm2)
•Pressure resistance: min. 14 kg/cm2
•Thickness: approx. 0.40 mm
•Density: approx. 405 g/m3
•Capacity: 1.22 meq/g
•Max. temperature: +95 °C
•Dimensional stability: wet: excellent; dry: good
•Regulations: Approvals of the Food Additives Regulations; § 121.2593
​
Item
​
50382
50383
50384
Type
​
Dimensions
cm
Unit
piece
Price
EURO
MC-3470
MC-3470
MC-3470
25 x 25
50 x 50
100 x 100
1
1
1
108.00
297.00
957.00
​
THOMAPOR®-Anion-Exchange Membrane
for Electrodialysis
Product specification
Item
​
50376
50377
50378
50379
50380
50381
Type
​
Dimensions
cm
Unit
piece
Price
EURO
MA-3475
MA-3475
MA-3475
MA-3512
MA-3512
MA-3512
25 x 25
50 x 50
100 x 100
25 x 30
50 x 30
90 x 100
1
1
1
1
1
1
108.00
297.00
956.00
100.00
275.00
880.00
THOMAPOR®-Cation-Exchange Membrane
for Electrodialysis - dry storage
Product specification
•The membrane resistance per surface unit is determined as follows:
a) The sample is steeped 4 hours in a 1:1 mixture of 1.0 N NaCl and
1.0 N HCl and afterwards shaked for 24 hours in a 125 ml bottle
containing 1.0 N NaCl.
b) Then the sample is exposed to a direct current for 8 minutes in a
photoconductive cell containing 1.0 N NaCl. After the first 4 minutes
polarity should be changed.
c) With the 3400 series the sample is heated in 0.1 N NaCl for 20 minutes at +100 °C, but with the 3100 series at +80-90 °C. Afterwards
the surface resistance per unit is determined.
•The membranes are supplied dry and should be stored at a dark place
(max. +15 °C). Only for activation they have to be loaded in a 10% salt
solution at +55 °C for at least 3 hours
•Chemical stability:
Good chemical stability in neutral solutions, in acid solutions (ph 0-7)
and in alkaline solutions (ph 7-11)
Fair chemical stability in alkaline solutions (ph 11-14) an to mild
oxidizing agents
Poor chemical stability to reducing agents
62 THOMAPLAST® I - 2015
•Anion permeable membranes, PET reinforced
•Strongly basic
•Electrodialysis membranes have always to be kept wet and should be
stored in a 3 % NaCl solution in a cool and dark place.
•Chemical resistance:
Very good to acetaldehyde (15 %), acetaldehyde (30 %), aniline (4 %),
ethanol (15 %), ethanol (50 %), ethylenglycol (15 %), ethylenglycol (30
%), acetic acid (15 %), acetic acid (50 %), H2SO4 (10 %), H2SO4 (30 %),
HCI (7 %), HCI (35 %), oxalic acid (10 %), pyridine (15 %), pyridine (50 %), tartaric acid (15 %), tartaric acid (50 %)
Good to ethyl „Cellosolve“ (50 %), ethylacetic acid (15 %), cresol (2.6 %),
methyl „Cellosolve“ (50 %), triethylamine1) (15 %), triethylamine1) (50 %)
Less good to acetone (15 %), dioxan (30 %), hydrochinone (5.8 %),
methylethyl ketone (15 %), phenol (6 %), propylene glycol (50 %)
1)
The transport number decreases with increasing electrical resistance
Technical specification
•Colour: brown
•Thickness: 0.13 mm
•Resistivity: 3.3 Ohm*cm2 (The resistivity was measured after equilibrium with 0.5 M NaCl solution at +25 °C.)
•Counterion: bromide (br)
•Water content: 15 wt % (at +25 °C)
•Ion exchange capacity: 1.14 meq g-1
•Selectivity (0.1/0.5 mol/kg KCI): 97.9 % (at +25 °C)
•Specific conductivity: 4.0 mS cm-1 (in CI- form in 0.5 M NaCI at +25 °C)
•pH stability range: 1 - 8 (at +25 °C)
•Delivery form: dry
​
Separation Technology - Anion-Exchange Membranes and Cation-Exchange Membranes
Item
​
302899
302900
Dimensions
mm
Unit
piece
Price
EURO
250 x 250
500 x 500
1
1
225.00
665.00
THOMAPOR®-Anion-Exchange Membrane
for Electrodialysis - very stable
Item
​
•Anion permeable membranes
•For all-purpose use, high mechanical stability
•Strongly basic
•Electrodialysis membranes have always to be kept wet and should be
stored in a 3 % NaCl solution in a cool and dark place.
•Chemical resistance:
Very good to acetone (30 %), acetic acid (50 %), ethanol (50 %),
ethylenglycol (50 %), H2SO4 (10 %), H2SO4 (40 %), HCI (10 %), HNO3
(20 %), methanol (50 %), NaCl (3 %), NaCl (20 %), sodium thiosulfate
(3 %), phenol (7 %), citric acid (50 %)
Less good to dioxan (30 %), NaOH (5 %), NH3 (4 %)
Very low to strong oxidants
Technical specification
•Thickness: 0.16 - 0.18 mm
•Tearing strength: 4.5 - 5.5 kg/cm2
•Resistivity: 2.5 - 3.5 Ohm*cm2 (The resistivity was measured after
equilibrium with 0.5 N NaCl solution at +25 °C.)
•Transport number t: >0.98 (CI- SO4--) (Transport number at +25 °C
(measured by electrophoresis of sea water; current density 2 A/dm2))
•Counterion: CI•Water content: 0.25 - 0.30 g water/g dry membrane
(equilibr.: 0.5 N NaCl solution)
•Ion exchange capacity: 1.4 - 1.7 meq/g dry membrane
​
302901
302902
Dimensions
mm
Unit
piece
Price
EURO
250 x 250
500 x 500
1
1
105.00
330.00
THOMAPOR®-Cation-Exchange Membrane
for Electrodialysis - very stable
Product specification
•Cation permeable membranes
•For all-purpose use, high mechanical stability
•Strongly basic
•Electrodialysis membranes have always to be kept wet and should be
stored in a 3 % NaCl solution in a cool and dark place.
•Chemical resistance:
Very good to acetic acid (50 %), ethanol (50 %), ethylenglycol (50 %),
H2SO4 (10 %), H2SO4 (40 %), HCI (10 %), HNO3 (20 %), methanol (50 %),
NaCl (3 %), NaCl (20 %), NaOH (5 %), sodium thiosulfate (3 %), NH3 (4 %), citric acid (50 %)
Less good to acetone (30 %), dioxan (30 %)
Very low to phenol (7 %), strong oxidants
Technical specification
•Transport number t: >0.98 (Na+ K+ Ca++ Mg++), transport number at
+25 °C (measured by electrophoresis of sea water; current density 2 A/dm²)
•Counterion: Na+
•Water content: 0.25 - 0.30 g water/g dry membrane
(equilibr.: 0.5 N NaCl solution)
•Ion exchange capacity: 1.5 - 1.8 meq/g dry membrane
​
Product specification
Item
​
Filtration
•Thickness: 0.17 - 0.19 mm
•Tearing strength: 5 - 6 kg/cm2
•Resistivity: 2.5 - 3.5 Ohm x cm2, the resistivity was measured after
equilibrium with 0.5 N NaCl solution at +25 °C
302890
302891
Dimensions
mm
Unit
piece
Price
EURO
250 x 250
500 x 500
1
1
105.00
330.00
Hollow Fibres
THOMAPOR®-Hollow Fibres
Application area
•Separation of organic salts (desalination)
•Separation of impurities of low molecular masses (purification)
•Exchange of salts of low molecular masses (buffer exchange)
In principle, all these applications are effected in the same way: Salts
and other low molecular weight components diffuse out of the sample
from one side of fibre into the dialysing solution. Due to the isotropy of
the fibre dissolved substances can diffuse in both directions through
the fibre. Particularly suited for dialysis of dissolved substances in a
molecular mass range of 500-2000.
General product specification
•THOMAPOR®-hollow fibres are particularly suited for the dialysis of
dissolved substances in a molecular mass range of 500-2000. The
high permeability of dissolved substances in this range does not
involve a high water permeability.
•Micro hollow fibre:
For concentration, desalination, and purification of ultramicro and
micro amounts of valuable compounds (0.1 - 200 µl). Microsamples up
to 0.1 µl can be sucked off in the micro dialysing fibre bundle.
Outstandingly suited for dialysis and filtration are hollow fibres of a
smaller diameter with inlet and outlet for samples. The hollow fibres
are made of cellulose prepared of cotton linters.
•Macro hollow fibre:
The use of hollow fibres in desalination, concentration and fractionation is based on the unique feature of hollow fibres which can be
imagined as a molecular sieve with pores the sizes of which can be
controlled. Molecules smaller than the pores of the fibre wall can
diffuse through it while larger molecules are retained.
The homogenous structure of the fibres allows diffusion of dissolved
substances in both directions, either from the inside of the fibre to the
outside or vice versa.
Dialysis was used traditionally for separation of salts and other
dissolved low molecular weight substances out of biological and
biochemical solutions. Many conventional dialysis techniques such as
the use of dialysing bags are slower and inconvenient.
The application of hollow fibres allows for instance a 95 % separation
of salt out of serum in only 20 minutes.
The hollow fibre units consist of bundles of small (200 µm inner
diameter) semipermeable cellulose membrane tubing, which have a
high surface/volume ratio compared to a bag.
A large number of hollow fibres per bundle enlarges the effective
surface and increases dialysis velocity.
​
THOMAPLAST® I - 2015 63
Separation Technology - Hollow Fibres
Filtration
THOMAPOR®-Micro Single Hollow Fibre
for In-Vivo Dialysis
Borosilicate Glass Filter Disks
Product specification
•Hollow fibres for in-vivo applications and microdialysis, made of
regenerated cellulose, inside diameter 200 µm, outside diameter 216 µm, length approx. 154 mm; working volume approx. 5 µl, flow
rate at 10 mm Hg about 3 ml/h.
​
THOMAPOR®-Filter made of Borosilicate glass
Application area
•Filters made of borosilicate glass are suitable for various applications
because of their excellent properties. Applications are pharmaceutical,
biotechnology, medical, chemical and environmental. They are used
from coarse liquid and gas distribution to bacteria filtering.
General product specification
Item
​
58925
58926
Cut off
kDalton
Number fibres
​
Unit
piece
Price
EURO
13
18
1
1
20
20
349.00
349.00
THOMAPOR®-Hollow Fibre Bundle for Microdialysis
Product specification
•Complete hollow fibre bundles for processing of quantities up to 200 µl,
made of regenerated cellulose (RC), cut-off (MWCO) 13,000 and 18,000 dalton resp. Hollow fibre inside diameter 200 µm, hollow fibre
outside diameter 216 µm; fitted with sealing end pieces.
​
Item
​
50468
58924
Cut off
kDalton
Number
fibres
​
Bundle
volume
µl
Unit
Price
piece
EURO
13
18
20
20
140
140
1
1
330.00
415.00
•THOMAPOR®-borosilicate universal filters are exclusively made of borosilicate glass, without using other substances, such as binding agents
which corresponds to DIN ISO 3585. They consist of pure glass grit.
•The filter effect of a porous pad comprises screen effect and
adsorption. If a filter should only act as a screen, its pores have to be
smaller than the solid particles to be filtrated. The fluid volume to be
put through is relatively small. Large flow volumes are achieved by use
of a filter pad of which the filter effect is primarily based on adsorption.
In this case, the filter pores can to be several times larger than the
solid particles to be separated; e.g. for sterile filtration of air porous
filter pads with pore sizes of 15 to 40 µm are used while the size of
the particles to be retained (micro-organisms) is only 1/10 to 1/50 of
the filter pore size. A sure adsorption can only be achieved with a very
large inner surface of the filter body. If a filter pad is fritted of glass grit
should get a large inner surface, the single granule already has to have
a maximum large surface.
•In this respect the THOMAPOR®-borosilicate universal filter program is
an innovation. For production of the granules special crushing processes are used guaranteeing a splintery granule with a particularly large
surface. This surface is again enlarged by a special treatment.
•THOMAPOR®-borosilicate universal filters are manufactures as round
plates in sizes of 5 to 400 mm diameter and are available in two designs:
Type: G: ground to nominal diameter, edge non-fused
Type BG: ground to nominal diameter and surface biplane, edge
non-fused
•The filter porosity is divided into 6 categories and lies between 10
and 500 µm, rendering the filters usable for all work in the chemical
and pharmaceutical industry, in the laboratory and in industrial-scale
plants.
•Nominal value of maximum pore size (µm):
250 - 500: distribution of fluids and gases, supports for solid materials
in flow systems
160 - 250: distribution of gases, distribution of gases in fluids with low
gas pressure, filtration of coarse precipitations
100 - 160: coarse filtration, filtration of coarse precipitations, gas
distribution in fluids, fluid distribution, coarse gas filter, extraction
apparatuses for coarse material, supports for loose filter layers against
gelatinous precipitations
40 - 100: preparative fine filtration, preparative work with crystalline
precipitations, mercury filtration
16 - 40: analytical filtration, analytical work with medium fine precipitations, preparative work with fine precipitations, filtrations in cellulose
chemistry, fine gas filters, extraction apparatuses for fine-granular
material
10 - 16: analytical fine filtration, analytical work with very fine precipitations (e.g. BaSO4, Cu20), preparative work with corresponding fine
precipitations, check-valve and stop valve for mercury
​
64 THOMAPLAST® I - 2015
Separation Technology - Borosilicate Glass Filter Disks
THOMAPOR®-Filter Disk made of Borosilicate glass Type: G
Filtration
Item
​
52603
52604
52605
52606
52607
52608
52609
52610
52611
52612
52613
52614
52615
52616
52617
52618
52619
52620
52621
52622
52623
52624
52625
52626
52627
52628
52629
52630
52631
52632
52633
52634
Product specification
•Type: G: ground to nominal diameter, edge non-fused
​
Item
​
52559
52560
52561
52562
52563
52564
52566
52567
52568
52569
52570
52571
52573
52574
52575
52576
52577
52578
52580
52581
52582
52583
52584
52585
52587
52588
52589
52590
52591
52592
52593
52594
52595
52596
52597
52598
52599
52600
52601
52602
Outside Ø1
mm
Pore size
µm
Unit
piece
Price
EURO
10
10
10
10
10
10
10
10
20
20
20
20
20
20
25
25
25
25
25
25
30
30
30
30
30
30
40
40
40
40
40
40
50
50
50
50
50
50
60
60
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
6
6
6
6
57.00
57.00
57.00
57.00
57.00
64.00
59.00
59.00
59.00
59.00
59.00
75.00
62.00
62.00
62.00
62.00
62.00
72.00
69.00
69.00
69.00
69.00
69.00
80.00
85.00
85.00
85.00
85.00
85.00
92.00
118.00
118.00
118.00
118.00
118.00
138.00
105.00
105.00
105.00
105.00
1
Outside Ø1
mm
Pore size
µm
Unit
piece
Price
EURO
60
60
60
60
70
70
70
70
70
70
80
80
80
80
80
80
90
90
90
90
90
90
100
100
100
100
100
100
120
120
120
120
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
6
6
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
105.00
132.00
93.00
93.00
93.00
93.00
93.00
120.00
102.00
102.00
102.00
102.00
102.00
132.00
108.00
108.00
108.00
108.00
108.00
147.00
82.00
82.00
82.00
82.00
82.00
108.00
100.00
100.00
100.00
100.00
100.00
120.00
ground to nominal diameter
THOMAPOR®-Filter Disk made of Borosilicate glass Type: BG, biplane ground
​
Product specification
•Type BG: ground to nominal diameter and surface biplane, edge non-fused
Item
​
52637
52638
52639
Outside Ø1
mm
Pore size
µm
Unit
piece
Price
EURO
5
5
5
160 - 250
100 - 160
40 - 100
10
10
10
85.00
85.00
85.00
THOMAPLAST® I - 2015 65
Separation Technology - Borosilicate Glass Filter Disks
Item
​
52640
52641
52642
52643
52644
52645
52646
52647
52648
52649
52650
52651
52652
52653
52654
52655
52656
52657
52658
52659
52660
52661
52662
52663
52664
52665
52666
52667
52668
52669
52670
52671
52672
52673
52674
52675
52676
52677
52678
52679
52680
52681
52682
52683
52684
52685
52686
52687
52688
52689
52690
52691
52692
52693
52694
52695
Outside Ø1
mm
Pore size
µm
Unit
piece
Price
EURO
5
5
10
10
10
10
10
10
20
20
20
20
20
20
25
25
25
25
25
25
30
30
30
30
30
30
40
40
40
40
40
40
50
50
50
50
50
50
60
60
60
60
60
60
70
70
70
70
70
70
80
80
80
80
80
80
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
6
6
6
6
6
6
6
6
6
6
6
6
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
85.00
100.00
90.00
90.00
90.00
90.00
90.00
105.00
92.00
92.00
92.00
92.00
92.00
110.00
100.00
100.00
100.00
100.00
100.00
118.00
105.00
105.00
105.00
105.00
105.00
126.00
87.00
87.00
87.00
87.00
87.00
96.00
117.00
117.00
117.00
117.00
117.00
129.00
93.00
93.00
93.00
93.00
93.00
102.00
141.00
141.00
141.00
141.00
141.00
153.00
110.00
110.00
110.00
110.00
110.00
120.00
66 THOMAPLAST® I - 2015
Filtration
Item
​
52696
52697
52698
52699
52700
52701
52702
52703
52704
52705
52706
52707
52708
52709
52710
52711
52712
52713
1
Outside Ø1
mm
Pore size
µm
Unit
piece
Price
EURO
90
90
90
90
90
90
100
100
100
100
100
100
120
120
120
120
120
120
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
250 - 500
160 - 250
100 - 160
40 - 100
16 - 40
10 - 16
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
139.00
139.00
139.00
139.00
139.00
151.00
118.00
118.00
118.00
118.00
118.00
126.00
170.00
170.00
170.00
170.00
170.00
181.00
ground to nominal diameter and biplane
Sintered Plates, Sintered Rods and
Sintered Pipes
THOMAPOR®-Porous Sintered Material made of PE
Application area
•Filtration of gases and fluids
•Gassing and ventilation, atomization
•Fluidizing (keeping bulk material suspended by homogenous flowing
through of a carrier gas)
•Use of the porous material structure and its chemical resistance
(condensate separation, separation of emulsions, diaphragm in
electrodialysis, carrier body for fluids as false bottom)
General product specification
•Porous sintered plastic made of pure low-pressure HDPE of high
density. Through an exactly defined and controlled sintering process
PE granules are fused together so that stable bodies of various shapes
form. By granular material selection and choice of process parameters
the pore size of the porous THOMAPOR®-sintered elements can be
selectively influenced.
•Temperature load:
+82 °C as permanent load;
+100 °C without loading;
+116 °C with interruptions
•Material of very high density and hydrophobic properties
•Very well suited for machining. Material can be sawed, through-drilled
and processed by machines.
•Allows thermic welding with hot inert gas or with a PTFE-coated welder
•Can be bonded by epoxy-based adhesives with itself, with wood, metal
and ceramics. Epoxy forms a mechanical bond with the plastic and a
chemical bond with the substrate resulting in a strong bonding.
•Resistant to alkohols, aliphatic hydrocarbons, organic compounds such
as technical oils, strong alkalis, acids and their salt-formers. A weak
attack is possible by oxidants, chlorinated and aromatic hydrocarbons.
​
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
THOMAPOR®-Sintered Plate made of Porous UHMW-PE
Item
Technical specification
​
•Material: polyethylene of ultrahigh molecular weight UHMW-PE
•Design: plates, hydrophobic
12147
12148
12149
12150
12151
12152
12153
12154
12155
12156
12157
12158
12159
12160
12161
12162
12163
12164
12165
12166
12167
12168
12169
12170
12171
12172
12173
12174
12175
12176
12177
12178
12179
12180
12181
12182
​
52381, 12135
Item
​
52381
52382
52383
52384
52385
52386
52387
52388
52389
52390
52391
52392
52393
52394
52395
52396
52397
52398
52381, 12135
Pore size
µm
Thickness
mm
Dimensions
mm
Price
EURO
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
1.6
1.6
1.6
1.6
1.6
1.6
3.2
3.2
3.2
3.2
3.2
3.2
6.35
6.35
6.35
6.35
6.35
6.35
100 x 100
100 x 100
250 x 250
250 x 250
500 x 500
500 x 500
100 x 100
100 x 100
250 x 250
250 x 250
500 x 500
500 x 500
100 x 100
100 x 100
250 x 250
250 x 250
500 x 500
500 x 500
49.00
54.00
72.00
77.00
133.00
139.00
62.00
67.00
105.00
110.00
251.00
259.00
75.00
80.00
149.00
156.00
338.00
346.00
THOMAPOR®-Sintered Plate made of Microporous HDPE
Technical specification
​
12135
12136
12137
12138
12139
12140
12141
12142
12143
12144
12145
12146
10
10
10
10
10
10
10
10
10
10
10
10
2
2
2
2
2
2
2
2
2
2
2
2
35
35
35
45
45
45
45
45
45
45
45
45
Thick- Dimensions
ness
mm
cm
3
3
3
5
5
5
8
8
8
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
40
40
40
40
40
40
80
80
80
80
80
80
80
80
80
80
80
80
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
20
20
20
20
20
20
20
20
20
20
20
20
35
35
35
45
45
45
45
45
45
45
45
45
35
35
35
45
45
45
45
45
45
45
45
45
35
35
35
45
45
45
45
45
45
45
45
45
Thick- Dimensions
ness
mm
cm
3
3
3
5
5
5
8
8
8
20
20
20
3
3
3
5
5
5
8
8
8
20
20
20
3
3
3
5
5
5
8
8
8
20
20
20
Price
EURO
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
105.00
50 x 50
305.00
100 x 100
936.00
25 x 25
197.00
50 x 50
596.00
100 x 100 1,580.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
105.00
50 x 50
305.00
100 x 100
936.00
25 x 25
197.00
50 x 50
596.00
100 x 100 1,580.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
105.00
50 x 50
305.00
100 x 100
936.00
25 x 25
197.00
50 x 50
596.00
100 x 100 1,580.00
​
​
Pore Filter Porosity
size fineness
µm
µm
%
Pore Filter Porosity
size fineness
µm
µm
%
THOMAPOR®-Sintered Plate made of Porous HDPE
•Material: low pressure polyethylene (HDPE) of high density
•Design: hydrophobic, does not swell in water
Item
Filtration
Price
EURO
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
95.00
50 x 50
277.00
100 x 100
834.00
25 x 25
105.00
50 x 50
305.00
100 x 100
936.00
25 x 25
197.00
50 x 50
596.00
100 x 100 1,580.00
Technical specification
•Material: low pressure polyethylene (HDPE) of high density
•Design: plates, hydrophobic
52228, 52905
52228, 52905
THOMAPLAST® I - 2015 67
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
Item
​
52228
52229
52230
52231
52232
52233
52234
52235
52236
52237
52238
52239
52240
52241
52242
52243
52244
52245
52246
52247
52248
52249
52250
52251
52252
52253
52254
52255
52256
52257
52258
52259
52260
52261
52262
52263
Pore size
µm
Thickness
mm
Dimensions
mm
Price
EURO
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
100 x 100
100 x 100
100 x 100
100 x 100
250 x 250
250 x 250
250 x 250
250 x 250
500 x 500
500 x 500
500 x 500
500 x 500
100 x 100
100 x 100
100 x 100
100 x 100
250 x 250
250 x 250
250 x 250
250 x 250
500 x 500
500 x 500
500 x 500
500 x 500
100 x 100
100 x 100
100 x 100
100 x 100
250 x 250
250 x 250
250 x 250
250 x 250
500 x 500
500 x 500
500 x 500
500 x 500
29.00
29.00
29.00
29.00
56.00
56.00
56.00
56.00
132.00
132.00
132.00
132.00
44.00
44.00
44.00
44.00
70.00
70.00
70.00
70.00
153.00
153.00
153.00
153.00
65.00
65.00
65.00
65.00
102.00
102.00
102.00
102.00
199.00
199.00
199.00
199.00
THOMAPOR®-Sintered Plate made of Porous LDPE
Technical specification
•Material: low pressure polyethylene with highly porous structure
•Density: 0.61 - 0.66 g/cm3
​
Item
​
52905
52906
52907
52908
529011
52902
52903
52904
Pore size
µm
20
20
20
20
20
20
20
20
Porosity Thickness Dimensions
%
mm
mm
40
40
40
40
40
40
40
40
68 THOMAPLAST® I - 2015
3
5
6
8
3
5
6
8
225 x 225
225 x 225
225 x 225
225 x 225
450 x 450
450 x 450
450 x 450
450 x 450
Price
EURO
105.00
105.00
141.00
141.00
243.00
243.00
305.00
305.00
Filtration
THOMAPOR®-Sintered Disk made of Porous UHMW-PE
Technical specification
•Material: polyethylene of ultrahigh molecular weight (UHMW-PE)
•Design: disks, hydrophobic
​
Item
​
52417
52418
52419
52420
52421
52422
52425
52426
52427
52428
52429
52430
52433
52434
52435
52436
52437
52438
52441
52442
52443
52444
52445
52446
52449
52450
52451
52452
52453
52454
52457
52458
52459
52460
52461
52462
Pore size
µm
Outside Ø
mm
Thickness
mm
Unit
piece
Price
EURO
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
13
13
13
13
13
13
25
25
25
25
25
25
47
47
47
47
47
47
50
50
50
50
50
50
76
76
76
76
76
76
90
90
90
90
90
90
1.6
1.6
3.2
3.2
6.35
6.35
1.6
1.6
3.2
3.2
6.35
6.35
1.6
1.6
3.2
3.2
6.35
6.35
1.6
1.6
3.2
3.2
6.35
6.35
1.6
1.6
3.2
3.2
6.35
6.35
1.6
1.6
3.2
3.2
6.35
6.35
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
60.00
65.00
100.00
100.00
125.00
150.00
125.00
130.00
140.00
150.00
175.00
175.00
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
THOMAPOR®-Sintered Disk made of Porous HDPE
Technical specification
Item
​
52308
52309
52310
52311
52312
52313
52314
52316
52317
52318
52319
52320
52322
52323
52326
52327
52328
52330
52338
•Material: low pressure polyethylene (HDPE) of high density
•Design: disks, hydrophobic
​
Item
​
52266
52267
52268
52269
52270
52271
52272
52273
52274
52275
52276
52277
52278
52279
52280
52281
52282
52283
52284
52285
52286
52287
52288
52289
52291
52292
52293
52294
52295
52296
52297
52298
52299
52300
52301
52302
52303
52304
52305
52306
52307
Pore size
µm
Outside Ø
mm
Thickness
mm
Unit
piece
Price
EURO
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
70
120
250
35
13
13
13
13
13
13
13
13
13
13
13
13
25
25
25
25
25
25
25
25
25
25
25
25
47
47
47
47
47
47
47
47
47
47
47
47
50
50
50
50
50
1.6
1.6
1.6
1.6
3.2
3.2
3.2
3.2
6.35
6.35
6.35
6.35
1.6
1.6
1.6
1.6
3.2
3.2
3.2
3.2
6.35
6.35
6.35
6.35
1.6
1.6
1.6
1.6
3.2
3.2
3.2
3.2
6.35
6.35
6.35
6.35
1.6
1.6
1.6
1.6
3.2
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
78.00
78.00
78.00
78.00
124.00
124.00
124.00
124.00
156.00
156.00
156.00
156.00
126.00
126.00
126.00
126.00
144.00
144.00
144.00
144.00
180.00
180.00
180.00
180.00
183.00
183.00
183.00
183.00
219.00
219.00
219.00
219.00
276.00
276.00
276.00
276.00
on req.
on req.
on req.
on req.
on req.
Filtration
Pore size
µm
Outside Ø
mm
Thickness
mm
Unit
piece
Price
EURO
70
120
250
35
70
120
250
35
70
120
250
35
120
250
120
250
35
120
120
50
50
50
50
50
50
50
76
76
76
76
76
76
76
76
76
90
90
90
3.2
3.2
3.2
6.35
6.35
6.35
6.35
1.6
1.6
1.6
1.6
3.2
3.2
3.2
6.35
6.35
1.6
1.6
6.35
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
on req.
THOMAPOR®-Sintered Pipe made of Porous UHMW-PE
Technical specification
•Material: polyethylene of ultrahigh molecular weight UHMW-PE
•Design: seamless and hydrophobic
​
Item
​
52353
52354
52355
52356
52357
52358
52359
52360
52361
52362
52363
52364
52365
52366
52367
52368
52369
52370
Pore size
µm
Inside Ø
mm
Outside Ø
mm
Length
mm
Price
EURO
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
20
12.7
12.7
12.7
12.7
19
19
25.4
25.4
28.6
28.6
39.6
39.6
42.8
42.8
57.2
57.2
60.8
60.8
19
19
25.4
25.4
25.4
25.4
38
38
35
35
52.4
52.4
52.4
52.4
70
70
76
76
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
96.00
100.00
110.00
116.00
110.00
116.00
121.00
126.00
121.00
126.00
162.00
167.00
162.00
167.00
192.00
197.00
202.00
208.00
THOMAPLAST® I - 2015 69
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
Item
​
52371
52372
52373
52374
52375
52376
52377
52378
Pore size
µm
Inside Ø
mm
Outside Ø
mm
Length
mm
Price
EURO
10
20
10
20
10
20
10
20
63.6
63.6
66.4
66.4
139.6
139.6
152.2
152.2
70
70
76
76
152.4
152.4
165
165
460
460
460
460
460
460
460
460
210.00
215.00
210.00
215.00
548.00
558.00
609.00
624.00
THOMAPOR®-Sintered Pipe made of Microporous HDPE
Technical specification
•Material: low pressure polyethylene (HDPE) of high density
•Design: hydrophobic, does not swell in water
​
Item
​
12183
12184
12185
12186
12187
12188
12189
12190
12191
12192
12193
12194
12195
12196
12197
12198
12199
12200
12201
12202
12203
12204
12205
12206
12207
12208
12209
12210
Pore
size
µm
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
20
20
20
20
Filter Porosity I-Ø
fineness
µm
%
mm
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
5
5
5
5
70 THOMAPLAST® I - 2015
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
20
20
20
28
28
28
30
30
30
40
40
40
40
40
40
50
50
50
40
40
40
60
60
60
20
20
20
28
O-Ø
Unit
Price
mm
m
EURO
40
40
40
40
40
40
50
50
50
50
50
50
60
60
60
60
60
60
70
70
70
70
70
70
40
40
40
40
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
75.00
141.00
264.00
75.00
141.00
264.00
85.00
159.00
297.00
85.00
159.00
297.00
93.00
174.00
330.00
93.00
174.00
330.00
100.00
195.00
369.00
100.00
195.00
369.00
75.00
141.00
264.00
75.00
Item
​
12211
12213
12214
12215
12216
12217
12218
12219
12220
12221
12222
12223
12224
12225
12226
12227
12228
12229
12230
12231
12232
12233
12234
12235
12236
12237
12238
12239
12240
12241
12242
12243
12244
12245
12246
12247
12248
12249
12250
12251
12252
12253
12254
12255
12256
12257
12258
12259
12260
12261
12262
12263
12264
12265
12266
Pore
size
µm
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
80
80
80
80
80
80
80
80
80
80
80
Filtration
Filter Porosity I-Ø
fineness
µm
%
mm
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
28
28
30
30
30
40
40
40
40
40
40
50
50
50
40
40
40
60
60
60
20
20
20
28
28
28
30
30
30
40
40
40
40
40
40
50
50
50
40
40
40
60
60
60
20
20
20
28
28
28
30
30
30
40
40
O-Ø
Unit
Price
mm
m
EURO
40
40
50
50
50
50
50
50
60
60
60
60
60
60
70
70
70
70
70
70
40
40
40
40
40
40
50
50
50
50
50
50
60
60
60
60
60
60
70
70
70
70
70
70
40
40
40
40
40
40
50
50
50
50
50
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
141.00
264.00
85.00
159.00
297.00
85.00
159.00
297.00
93.00
174.00
330.00
93.00
174.00
330.00
100.00
195.00
369.00
100.00
195.00
369.00
75.00
141.00
264.00
75.00
141.00
264.00
85.00
159.00
297.00
85.00
159.00
297.00
93.00
174.00
330.00
93.00
174.00
330.00
100.00
195.00
369.00
100.00
195.00
369.00
75.00
141.00
264.00
75.00
141.00
264.00
85.00
159.00
297.00
85.00
159.00
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
Item
​
12267
12268
12269
12270
12271
12272
12273
12274
12275
12276
12277
12278
12279
Pore
size
µm
Filter Porosity I-Ø
fineness
µm
%
mm
80
80
80
80
80
80
80
80
80
80
80
80
80
20
20
20
20
20
20
20
20
20
20
20
20
20
45
45
45
45
45
45
45
45
45
45
45
45
45
40
40
40
40
50
50
50
40
40
40
60
60
60
O-Ø
Unit
Price
mm
m
EURO
50
60
60
60
60
60
60
70
70
70
70
70
70
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
0.25
0.5
1
297.00
93.00
174.00
330.00
93.00
174.00
330.00
100.00
195.00
369.00
100.00
195.00
369.00
Item
​
52223
52224
52225
52226
52227
Filtration
Pore size
µm
Inside Ø
mm
Outside Ø
mm
Length
mm
Price
EURO
250
35
60
100
250
57.2
66.4
66.4
66.4
66.4
70
76
76
76
76
500
500
500
500
500
140.00
148.00
148.00
148.00
148.00
THOMAPOR®-Sintered Solid Rod
made of Porous UHMW-PE
Technical specification
•Material: polyethylene of ultrahigh molecular weight UHMW-PE
•Design: solid rods, hydrophobic
​
THOMAPOR®-Sintered Pipe made of Porous HDPE
Technical specification
•Material: low pressure polyethylene (HDPE) of high density
•Design: seamless and hydrophobic
​
Item
​
Item
​
52200
52201
52202
52203
52204
52205
52206
52207
52208
52209
52210
52211
52212
52213
52214
52215
52216
52217
52218
52219
52220
52221
52222
Pore size
µm
Inside Ø
mm
Outside Ø
mm
Length
mm
Price
EURO
35
60
100
250
35
60
100
250
35
60
100
250
35
60
100
250
35
60
100
250
35
60
100
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
25.4
25.4
25.4
25.4
28.6
28.6
28.6
28.6
39.6
39.6
39.6
39.6
57.2
57.2
57.2
19
19
19
19
25.4
25.4
25.4
25.4
38
38
38
38
35
35
35
35
52.4
52.4
52.4
52.4
70
70
70
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
78.00
78.00
78.00
78.00
94.00
94.00
94.00
94.00
109.00
109.00
109.00
109.00
102.00
102.00
102.00
102.00
121.00
121.00
121.00
121.00
140.00
140.00
140.00
52466
52467
52468
52469
52470
52471
Pore size
µm
Outside Ø
mm
Length
mm
Price
EURO
10
20
10
20
10
20
3.2
3.2
6.4
6.4
12.7
12.7
300
300
300
300
300
300
80.00
85.00
87.00
93.00
100.00
105.00
THOMAPOR®-Sintered Solid Rod made of Porous HDPE
Technical specification
•Material: low pressure polyethylene (HDPE) of high density
•Design: solid rods, hydrophobic
​
Item
​
52341
52342
52343
52344
52345
52346
52347
52348
52349
Pore size
µm
Outside Ø
mm
Length
mm
Price
EURO
35
70
120
35
70
120
35
70
120
3.2
3.2
3.2
6.4
6.4
6.4
12.7
12.7
12.7
300
300
300
300
300
300
300
300
300
54.00
54.00
54.00
61.00
61.00
61.00
73.00
73.00
73.00
THOMAPLAST® I - 2015 71
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
THOMAPOR®-Porous Sintered Material made of PTFE
Application area
Item
​
301927
301933
302863
301915
301921
302864
14873
14874
96246
301934
302865
302866
14875
14876
14877
14878
301916
301922
301928
301935
14879
14880
14881
14882
14883
14884
301917
301923
301929
301936
96247
301937
96243
301924
96244
301925
301930
301938
301918
301926
301931
301939
•Filtration of gases and fluids
•As gas feeding and distribution system (gassing)
•THOMAPOR®-PTFE sintered elements are used for filtration of highly
aggressive vapors, gases and fluids at highest temperatures up to
+240 °C. The elements are easy to clean after the filtration process
even when used with sticky media.
•THOMAPOR®-PTFE sintered elements do not soil when dipped into
water containing suspended matter as neither water nor electrolytes
are able to enter into the pores. Nevertheless, the gas flow rate is high
and of constant intensity.
General product specification
•Porous sintered plastic made of pure high-density polytetrafluoroethylene (PTFE). Through a exactly defined and controlled sintering
process PTFE granules are fused together so that stable bodies of
various shapes form. By granular material selection and choice of
process parameters the pore size of the porous THOMAPOR®-sintered
elements can be selectively influenced.
•Usable in temperature ranges from -200 to +260 °C
•Universal chemical resistance
•Non-adhesive behavior
•Physiological safety
•Prevents water absorption
•Hydrophobic, non-wettable
•Use as porous false bottom
•As dusting unit
•As pressure-compensating element in apparatus building
•As separator in the electrochemistry
•Use of the porous material structure and its chemical resistance
(condensate separation), separation of emulsions, diaphragm in
electrodialysis, carrier for fluids.
​
THOMAPOR®-Sintered Plate made of Porous PTFE
​
Item
​
96242
301919
14867
14868
96245
301932
14869
14870
14871
14872
301914
301920
302861
Pore size
µm
Thickness1
mm
Dimensions
mm
Price
EURO
1
1
1
1
1
1
1
1
1
1
5
5
5
0.5
0.5
1.6
1.6
2
2
3.2
3.2
6.35
6.35
0.5
0.5
1
100 x 100
300 x 300
100 x 100
250 x 250
100 x 100
300 x 300
100 x 100
250 x 250
100 x 100
250 x 250
100 x 100
300 x 300
320 x 320
118.00
258.00
81.00
230.00
138.00
302.00
119.00
345.00
214.00
557.00
118.00
258.00
218.00
72 THOMAPLAST® I - 2015
1
Filtration
Pore size
µm
Thickness1
mm
Dimensions
mm
Price
EURO
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
20
20
20
20
25
25
25
25
25
25
30
30
30
30
40
40
50
50
60
60
60
60
100
100
100
100
2
2
3
0.5
0.5
1
1.6
1.6
2
2
2
3
3.2
3.2
6.35
6.35
0.5
0.5
2
2
1.6
1.6
3.2
3.2
6.35
6.35
0.5
0.5
2
2
2
2
0.5
0.5
0.5
0.5
2
2
0.5
0.5
2
2
100 x 100
300 x 300
320 x 320
100 x 100
300 x 300
320 x 320
100 x 100
250 x 250
100 x 100
300 x 300
320 x 320
320 x 320
100 x 100
250 x 250
100 x 100
250 x 250
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
250 x 250
100 x 100
250 x 250
100 x 100
250 x 250
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
100 x 100
300 x 300
138.00
302.00
304.00
118.00
258.00
218.00
74.00
209.00
138.00
302.00
258.00
304.00
108.00
313.00
195.00
507.00
118.00
258.00
138.00
302.00
74.00
209.00
108.00
313.00
195.00
507.00
118.00
258.00
138.00
302.00
138.00
302.00
118.00
258.00
118.00
258.00
138.00
302.00
118.00
258.00
138.00
302.00
Tolerance ±0.05 mm
THOMAPOR®-Sintered Disk made of Porous PTFE
​
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
Technical specification
Item
​
•Material: PTFE (polytetrafluoroethylene), microporous
•Temperature range: -200 to +250 °C
•Sterilization: autoclavable (+121 °C)
Item
​
302832
302833
302834
302835
14851
302836
302837
14852
14859
14860
302838
302839
302840
302841
14853
302842
302843
14854
14861
14862
302844
302845
302846
302847
14855
302848
302849
14856
14863
14864
14857
14858
14865
14866
302850
302851
302852
302853
302854
302855
Outside Ø
mm
Pore size
µm
Thickness
mm
Unit
piece
Price
EURO
13
13
13
13
13
13
13
13
13
13
25
25
25
25
25
25
25
25
25
25
47
47
47
47
47
47
47
47
47
47
50
50
50
50
90
90
90
90
90
90
5
5
5
10
10
10
10
10
25
25
5
5
5
10
10
10
10
10
25
25
5
5
5
10
10
10
10
10
25
25
10
10
25
25
5
5
5
10
10
10
1
2
3
1
1.6
2
3
3.2
1.6
3.2
1
2
3
1
1.6
2
3
3.2
1.6
3.2
1
2
3
1
1.6
2
3
3.2
1.6
3.2
1.6
3.2
1.6
3.2
1
2
3
1
2
3
5
5
5
5
2
5
5
2
2
2
5
5
5
5
2
5
5
1
2
1
5
5
5
5
2
5
5
1
2
1
1
1
1
1
3
3
3
3
3
3
55.00
75.00
98.00
55.00
68.00
75.00
98.00
116.00
68.00
116.00
112.00
156.00
198.00
112.00
198.00
156.00
198.00
186.00
198.00
186.00
222.00
320.00
444.00
222.00
200.00
320.00
444.00
172.00
200.00
172.00
111.00
200.00
111.00
200.00
286.00
376.00
474.00
286.00
376.00
474.00
14885
14886
14887
14888
14889
14890
14891
14892
14893
14894
14895
14896
14897
14898
14899
14900
14901
14902
Filtration
Pore size
µm
Inside Ø
mm
Outside Ø
mm
Length
mm
Price
EURO
1
1
1
1
1
1
10
10
10
10
10
10
25
25
25
25
25
25
12.6
12.6
25.2
39.6
57.2
66.4
12.6
12.6
25.2
39.6
57.2
66.4
12.6
12.6
25.2
39.6
57.2
66.4
19
25.4
38
52.4
70
76
19
25.4
38
52.4
70
76
19
25.4
38
52.4
70
76
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
222.00
288.00
308.00
329.00
351.00
395.00
203.00
261.00
281.00
299.00
320.00
359.00
203.00
261.00
281.00
299.00
320.00
359.00
THOMAPOR®-Sintered Rod made of Microporous PTFE
​
Item
​
302875
302876
302877
302878
302879
302880
302881
302882
302883
302884
302885
302886
THOMAPOR®-Sintered Pipe made of Porous PTFE
Pore size
µm
Outside Ø
mm
Length
mm
Unit
piece
Price
EURO
5
5
5
5
10
10
10
10
50
50
50
50
28
32
40
50
28
32
40
50
28
32
40
50
100
120
120
140
100
120
120
140
100
120
120
140
1
1
1
1
1
1
1
1
1
1
1
1
56.00
92.00
118.00
172.00
56.00
92.00
118.00
172.00
56.00
92.00
118.00
172.00
​
THOMAPOR®-Sintered Rod (rectangular)
made of Porous PTFE
​
Item
​
14903
14904
14905
14906
Width
mm
Height
mm
Pore size
µm
Length
mm
Price
EURO
3.2
6.4
12.7
3.2
3.2
6.4
12.7
3.2
1
1
1
10
300
300
300
300
90.00
143.00
216.00
82.00
THOMAPLAST® I - 2015 73
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes
Item
​
14907
14908
14909
14910
14911
Width
mm
Height
mm
Pore size
µm
Length
mm
Price
EURO
6.4
12.7
3.2
6.4
12.7
6.4
12.7
3.2
6.4
12.7
10
10
25
25
25
300
300
300
300
300
129.00
197.00
82.00
129.00
197.00
THOMAPOR®-Sinter Plate on Cr-Ni-Steel Base
(highly porous)
Application area
•Gas filtration, fluid filtration, clarification and separation filtration, high
pressure filtration, solvent separation, filtration of polyamides, polyesters and acetates before extrusion moulding of fibres and films
Product specification
•Cleaning of dirty sinter plates: In simple cases the THOMAPOR®sinter metal plates SR are cleaned in the countercurrent with a clean
fluid or with clean gas according to the intended use of the filter. This
method is always sufficient when all contaminations are retained at
the surface of the filter element and no particles are lodged in the
pore space.
•Additionally, slight brushing with a soft nylon brush helps. If soiling
particles are lodged in the filter and cleaning in the countercurrent
is not sufficient, solvents can be used. Duration of cleaning and temperature can be varied depending on the degree of soiling. Use of acids
or alkalis of high concentration and at high temperatures is not recommended. Neutralization with hot water should be done in any case.
•THOMAPOR®-highly porous sinter metal plates SR comply with the directions of the German Food Law. Due to their very low carbon content
they are highly resistant to intercristalline corrosion.
Technical specification
•Material: chromium-nickel-steel, based on material 1.4404
•Operating temperature:
in oxidizing atmosphere: +500 °C
in reducing atmosphere: +650 °C
​
Item
​
Pore Porosity Density
size
µm
%
g/cm³
52943
52944
52945
52946
52947
52948
52949
52950
52951
2.8
2.8
2.8
2.8
4
4
4
4
6
30 - 35
30 - 35
30 - 35
30 - 35
32 - 37
32 - 37
32 - 37
32 - 37
33 - 38
5.2 - 5.6
5.2 - 5.6
5.2 - 5.6
5.2 - 5.6
5.0 - 5.4
5.0 - 5.4
5.0 - 5.4
5.0 - 5.4
4.9 - 5.3
74 THOMAPLAST® I - 2015
Thick- Dimensions
ness
mm
mm
3
5
8
10
3
5
8
10
3
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
Price
EURO
167.00
210.00
261.00
356.00
167.00
210.00
261.00
356.00
167.00
Item
Filtration
​
Pore Porosity Density
size
µm
%
g/cm³
52952
52953
52954
52955
52956
52957
52958
52959
52960
52961
52962
52963
52964
52965
52966
52967
52968
52969
52970
52971
52972
52973
52974
52910
52911
52913
52914
52915
52916
52917
52918
52919
52920
52921
52922
52923
52924
52925
52926
52927
52928
52929
52930
52931
52932
52933
52934
52935
52936
52937
52938
52939
52940
52941
52942
6
6
6
8
8
8
8
13
13
13
13
20
20
20
20
25
25
25
25
32
32
32
32
2.8
2.8
2.8
2.8
4
4
4
4
6
6
6
6
8
8
8
8
13
13
13
13
20
20
20
20
25
25
25
25
32
32
32
32
33 - 38
33 - 38
33 - 38
36 - 41
36 - 41
36 - 41
36 - 41
37 - 42
37 - 42
37 - 42
37 - 42
38 - 43
38 - 43
38 - 43
38 - 43
39 - 44
39 - 44
39 - 44
39 - 44
40 - 45
40 - 45
4,3 - 4,7
4,3 - 4,7
30 - 35
30 - 35
30 - 35
30 - 35
32 - 37
32 - 37
32 - 37
32 - 37
33 - 38
33 - 38
33 - 38
33 - 38
36 - 41
36 - 41
36 - 41
36 - 41
37 - 42
37 - 42
37 - 42
37 - 42
38 - 43
38 - 43
38 - 43
38 - 43
39 - 44
39 - 44
39 - 44
39 - 44
40 - 45
40 - 45
40 - 45
40 - 45
4.9 - 5.3
4.9 - 5.3
4.9 - 5.3
4.7 - 5.1
4.7 - 5.1
4.7 - 5.1
4.7 - 5.1
4.6 - 5.0
4.6 - 5.0
4.6 - 5.0
4.6 - 5.0
4.5 - 4.9
4.5 - 4.9
4.5 - 4.9
4.5 - 4.9
4.4 - 4.8
4.4 - 4.8
4.4 - 4.8
4.4 - 4.8
4.3 - 4.7
4.3 - 4.7
4.3 - 4.7
4.3 - 4.7
5.2 - 5.6
5.2 - 5.6
5.2 - 5.6
5.2 - 5.6
5.0 - 5.4
5.0 - 5.4
5.0 - 5.4
5.0 - 5.4
4.9 - 5.3
4.9 - 5.3
4.9 - 5.3
4.9 - 5.3
4.7 - 5.1
4.7 - 5.1
4.7 - 5.1
4.7 - 5.1
4.6 - 5.0
4.6 - 5.0
4.6 - 5.0
4.6 - 5.0
4.5 - 4.9
4.5 - 4.9
4.5 - 4.9
4.5 - 4.9
4.4 - 4.8
4.4 - 4.8
4.4 - 4.8
4.4 - 4.8
4.3 - 4.7
4.3 - 4.7
4.3 - 4.7
4.3 - 4.7
Thick- Dimensions
ness
mm
mm
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
3
5
8
10
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
125 x 125
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
250 x 250
Price
EURO
210.00
261.00
356.00
167.00
210.00
261.00
356.00
167.00
210.00
261.00
356.00
167.00
210.00
261.00
356.00
167.00
210.00
261.00
356.00
167.00
210.00
261.00
356.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
491.00
563.00
696.00
1,038.00
Separation Technology - Round Filters and Membranes
Filtration
THOMAPOR®-Non-Woven Fabric Filter
made of Sinter Metal Fibres
Product specification
•Very small pore size with high flow rate and high uptake capacity for
dirt particles at the same time.
•The filtration characteristic is depicted by retention of smallest
particles (dirt particles).
•High pressure loadability with material stability in one. Even under
extreme load no fibre release occurs.
•Repeated sterilization at highest temperatures allowed.
•Permissive temperature load up to max. +500 °C.
•The non-woven filter can be cutted, plied and welded without
problems.
•High corrosion resistance, made of high-quality steel 1.4404
•Dimensions: 147.5 x 187.5 mm
Item
​
53348
53350
53351
53358
53360
53361
53363
53365
53366
53370
53372
53373
​
Item
​
52763
52764
52765
52766
52767
52770
1
Filter
Bubble
Max.
Dirt
fineness Point flow rate pick-up
gases1
µm
mbar
l/min. mg/cm²
10
20
30
10
15
40
37
18.5
12.3
37
24.7
9.3
125
400
800
108
180
620
2
2
2
3.7
6
11
Thickness
Price
mm
EURO
0.13
0.13
0.13
0.38
0.38
0.65
107.00
117.00
127.00
131.00
148.00
204.00
Air (l/min. x dm2 at 2 mbar)
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
13
13
13
25
25
25
47
47
47
50
50
50
1.2
0.45
0.2
1.2
0.45
0.2
1.2
0.45
0.2
1.2
0.45
0.2
100
100
100
100
100
100
100
100
100
100
100
100
104.00
104.00
104.00
130.00
130.00
130.00
169.00
169.00
169.00
182.00
182.00
182.00
THOMAPOR®-Membrane made of Cellulose Nitrate
Application area
•Microbiology, transfer and blotting technology, ELISAs and RIAs
Product specification
Dry filter made of biologically inert 100 % pure cellulose nitrate; of
good wettability and high flexibility. Amount of extractable components
approx. 1.5 % by weight.
•R1: Prefiltration, dust counting technique, separation of cells from
viscous media, separation of yeast and fibres
•R2: Protein testing, transfer media for DNA/RNA
•R3: Production of ultrapure fluids, concentration and separation of
phages and viruses, use in microbiological investigations.
​
Round Filters and Membranes
THOMAPOR®-Membrane made of Cellulose Acetate
Application area
•Process filtration
•Sterile filtration in pharmacy
•Clarification in pharmacy
•Determination of residues in used mineral oils and hot gases
•For sterility testing in radiochemical investigations
Product specification
•Resistant to dry heat up to +180 °C, to short chain alcohols as well
as to oily solutions. Cellulose acetate membranes are extremely
dimensionally stable in aqueous solutions and have a very low binding
capacity particularly for proteins. The amount of extractable components is below 2 % by weight.
​
Item
​
53047
53048
53053
53060
53061
53062
53067
Type
​
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
R1
R1
R2
R1
R1
R1
R2
25
25
25
47
47
47
47
8
5
0.45
12
8
5
0.45
100
100
100
100
100
100
100
143.00
143.00
130.00
195.00
195.00
195.00
182.00
THOMAPLAST® I - 2015 75
Separation Technology - Round Filters and Membranes
Item
​
53071
53076
53077
53078
53083
Type
​
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
R3
R2
R1
R1
R2
47
50
50
50
50
0.1
12
8
5
0.45
100
100
100
100
100
182.00
221.00
221.00
221.00
195.00
Filtration
Technical specification
•Material: PES (polyether sulfone)
•Thickness: approx. 150 µm
•Max. temperature: +100 °C
•Sterilization: autoclavable (+121 °C)
​
THOMAPOR®-Membrane
made of Regenerated Cellulose
Application area
•They meet highest requirements in pharmaceutical applications
•For purification of organic solvents, photoresists and concentrated
short-chain alcohols as well as in water chemistry and in dust
counting technique
Item
Outside
Ø
Pore
size
​
mm
µm
15163
15164
15165
15166
15167
15168
15169
15171
15172
15173
15174
15175
15176
15177
15182
15195
15196
15197
15198
15199
15200
15201
13
25
37
47
50
90
142
13
25
37
47
50
90
142
47
13
25
37
47
50
90
142
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.45
1.2
1.2
1.2
1.2
1.2
1.2
1.2
Product specification
•Inserted in filtering apparatuses the membrane can be steamed or
sterilized with hot air at +180 °C. The filter type R6 can be autoclaved
at +136 °C without problems. The filter is flexible, dimensionally stable
and of remarkable wet strength. The membrane is resistant to organic
solvents to a high degree.
​
Item
​
53440
53441
53443
53445
53446
53450
53451
53455
53456
53457
53458
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
13
13
25
25
25
47
47
50
50
50
50
0.45
0.2
1
0.45
0.2
0.45
0.2
1
0.6
0.45
0.2
100
100
100
100
100
100
100
100
100
100
100
156.00
156.00
195.00
195.00
195.00
247.00
247.00
260.00
260.00
260.00
260.00
1
Max.
Max.
Unit
flow rate flow rate
1
2
gases
liquids
l/min. ml/min. piece
1
1
1
1
1
1
1
3
3
3
3
3
3
3
5
13
13
13
13
13
13
13
5
5
5
5
5
5
5
22
22
22
22
22
22
22
44
700
700
700
700
700
700
700
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Price
EURO
40.00
40.00
60.00
60.00
65.00
150.00
275.00
40.00
40.00
60.00
60.00
65.00
150.00
275.00
60.00
40.00
40.00
60.00
60.00
65.00
150.00
275.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-Round Filter made of PSU
Application area
THOMAPOR®-Round Filter made of PES
•Prefiltration and clarification of bioactive solutions as well as sterile
filtration of solutions and gases
Application area
Product specification
•Prefiltration and clarification of aqueous solutions
•Particle and aerosol filtration of gases in the areas of bio- and food
processing technology, chemical and physical laboratory engineering,
environmental technology and chemical nuclear technology
•Biocompatible, hydrophilic round filter made of chemically inert,
high-strength high-tech polymer material with regular pore structure
for high flow rates, very low protein binding, temperature-loadable,
sterilizable by autoclaving at +121 °C.
Product specification
Technical specification
•Hydrophilic filter made of chemically inert, high-strength polymer
material with regular pore structure for high flow rates; biocompatible,
certified according to USP Class VI „Plastics Test“, sterilizable by
autoclaving.
76 THOMAPLAST® I - 2015
•Material: PSU (polyether sulfone)
•Thickness: approx. 165 µm
•Max. temperature: +115 °C
•Sterilization: autoclavable (+121 °C)
​
Separation Technology - Round Filters and Membranes
Filtration
Item
Item
Outside
Ø
Pore
size
​
mm
µm
15203
15204
15205
15206
15207
15208
15209
15211
15212
15213
15214
15215
15216
15217
13
25
37
47
50
90
142
13
25
37
47
50
90
142
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.45
0.45
0.45
0.45
0.45
0.45
0.45
1
Max.
Max.
Unit
flow rate flow rate
gases1 liquids2
l/min. ml/min. piece
3
3
3
3
3
3
3
7
7
7
7
7
7
7
10
10
10
10
10
10
10
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Pore
size
​
mm
µm
150672
150682
150692
150702
150712
150722
150732
150753
150763
150773
150783
150793
150803
150813
150863
13
25
37
47
50
90
142
13
25
37
47
50
90
142
47
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.2
1.2
1.2
1.2
1.2
1.2
1.2
3
Price
EURO
40.00
45.00
55.00
60.00
60.00
165.00
250.00
40.00
45.00
55.00
60.00
60.00
165.00
250.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR -Round Filter
made of Acrylic Polymer for Fluids
®
Application area
•Clarification and fine filtration of aqueous solutions in the areas of
biology and environment.
Product specification
Outside
Ø
•Hydrophobic round filter based on polymer fibres with pore sizes
between 0.2 and 10 µm, non-woven support body; biocompatible,
certified according to USP Class VI-121 „Plastic Tests“, good chemical
resistance, not autoclavable.
Max.
Bubble
flow rate Point
gases1
l/min.
bar
40
40
40
40
40
40
40
25
25
25
25
25
25
25
55
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.2
Unit
Price
piece
EURO
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
40.00
50.00
65.00
65.00
70.00
170.00
290.00
40.00
50.00
65.00
65.00
70.00
170.00
290.00
65.00
Air (l/min./3.7 cm2) 2 Flow rate at 0.93 bar 3 Flow rate at 0.34 bar 4
Flow rate at 0.29 bar
1
THOMAPOR®-Round Filter made of Glass Fibre
Application area
•In the areas of bio- and food processing technology, chemical and physical laboratory engineering, environmental technology and chemical
nuclear technology
Product specification
•Prefiltration and clarification of hot or aggressive solutions
•Particle and aerosol filtration of gases
•Chemically and physically highly resistant, binderless 1 µm glass
fibre round filter for high flow rates, with good wet stability and high
retention capacity, sterilizable with all methods.
Technical specification
•Material: borosilicate fibre
•Thickness: approx. 450 µm
•Retention capacity for aerosols: >99.97 %
•Measuring conditions: Filter area 100 cm2; nominal particle size 0.3 µm;
air throughput: approx. 30 l/min.
​
Technical specification
•Material: repellent acrylic copolymer fibre
•Thickness: 65 - 130 µm
•Max. temperature: +88 °C
•Sterilization: gas (formalin, ethylene oxide)
​
Item
​
15043
15044
15045
15046
Outside
Ø
mm
13
25
37
47
Max. flow
Max. flow
Unit
rate gases1 rate liquids2
l/min.
ml/min.
piece
50
50
50
50
500
500
500
500
100
100
100
100
Price
EURO
50.00
60.00
70.00
80.00
THOMAPLAST® I - 2015 77
Separation Technology - Round Filters and Membranes
Item
​
15047
15048
15049
1
Outside
Ø
mm
Max. flow
Max. flow
Unit
rate gases1 rate liquids2
l/min.
ml/min.
piece
50
90
142
50
50
50
500
500
500
Filtration
Price
EURO
100 80.00
50 190.00
25 170.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-Capillary Pore Membrane
made of Polycarbonate
Application area
•Polycarbonate membranes are recommended for microscopic,
chemotactic and cytological studies as well as aerosol filtration and
subsequent analysis by X-ray fluorescence spectroscopy.
12.0 and 10.0 µm: general purification, prefiltration, purification and
preliminary filtration of caustic fluids such as photoresist, concentrated
acids, ester solutions
8.0 µm: as 12.0 µm: microfiltration of alcohols, of chemicals used as
reagents
5.0 µm: in cytology, chemotaxis, and gravimetric analysis
3.0 µm: general microfiltration and purification; cytological evaluation
of cerebrospinal fluids, chemotaxis, microfiltration of caustic fluids
2.0 µm: chemotaxis
1.0 µm: beer stabilization, prefiltration of serum, ultrapurification of
fluids, ultrapurifications of caustic fluids, microfiltration of alcoholic
solutions
0.8 µm: aerosol analysis, gravimetric analysis, wine stabilization,
microscopic analysis of aerosols, yeasts and mould fungi
0.6 µm: biological determination of cells, wine and milk, plasmapheresis, particle analysis in caustic fluids
0.4 µm: biological determination of fluids, collection of asbestos fibres,
dehydration and purification of cellular suspensions, immunology,
particle analysis of caustic fluids, analysis of yeast, mould fungi and
silicon oxide (silica)
0.2 µm: general sterile filtration, immunology, sterile filtration of
caustic fluids
0.1 and 0.08 µm: virus filtration
0.05; 0.03 and 0.015 µm: virus and protein filtration
Product specification
•Membranes can stand permanent temperatures of +140 °C (air or
steam) for an indefinite time allowing repeated autoclaving. Polyester
membranes are hydrophilic with chemical resistance similar to
PTFE. Polyester membranes are recommended for filtration of HPLC
solutions and samples which are to be analyzed by HPLC.
Technical specification
•Thickness: 5 - 10 µm
•Bursting pressure: >10 bar
•Weight (tare): 1.0 mg/cm2
•Density: 1.2 g/cm3
•Temperature range for heat-sealing: +230 to +275 °C
•Max. temperature: +140 °C
•Ash weight: 0.92 µg/cm2
•Porosity: 5 - 10 %
•Number density of pores: 105 - 6 x 108 pores/cm2
•Surface structure: flat and smooth
•Optical properties: translucent
•Hydrophilia: hydrophilic
•Release of fibres: none
•Sterilization: autoclavable (+121 °C)
•Water absorption: 0.24 % by weight
•Biological compatibility: inert
​
78 THOMAPLAST® I - 2015
Item
​
50559
50578
50597
50616
50635
50654
50673
50692
50711
50730
50749
50787
50768
50825
50541
50560
50579
50598
50617
50636
50655
50674
50693
50712
50731
50750
50788
50769
50807
50826
50542
50561
50580
50599
50637
50656
50675
50713
50751
50789
50770
50808
50827
50543
50562
50581
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
13
13
13
13
13
13
13
13
13
13
13
13
13
13
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
37
37
37
37
37
37
37
37
37
37
37
37
37
43
43
43
10
8
5
3
2
1
0.8
0.6
0.4
0.2
0.1
0.08
0.05
0.015
12
10
8
5
3
2
1
0.8
0.6
0.4
0.2
0.1
0.08
0.05
0.03
0.015
12
10
8
5
2
1
0.8
0.4
0.1
0.08
0.05
0.03
0.015
12
10
8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
230.00
230.00
230.00
230.00
230.00
230.00
230.00
230.00
180.00
180.00
310.00
370.00
320.00
490.00
260.00
230.00
230.00
230.00
230.00
230.00
230.00
230.00
230.00
190.00
190.00
350.00
480.00
450.00
490.00
550.00
350.00
350.00
280.00
280.00
280.00
280.00
280.00
240.00
480.00
610.00
610.00
610.00
610.00
370.00
370.00
330.00
Separation Technology - Round Filters and Membranes
Item
​
50600
50619
50638
50657
50714
50752
50790
50809
50544
50563
50582
50601
50620
50639
50658
50677
50696
50715
50734
50753
50791
50772
50810
50545
50564
50583
50602
50621
50640
50659
50678
50697
50716
50735
50792
50773
50811
50546
50603
50698
50793
50549
50587
50606
50644
50663
50682
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
43
43
43
43
43
43
43
43
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
50
50
50
50
50
50
50
50
50
50
50
50
50
50
76
76
76
76
90
90
90
90
90
90
5
3
2
1
0.4
0.1
0.08
0.03
12
10
8
5
3
2
1
0.8
0.6
0.4
0.2
0.1
0.08
0.05
0.03
12
10
8
5
3
2
1
0.8
0.6
0.4
0.2
0.08
0.05
0.03
12
5
0.6
0.08
12
8
5
2
1
0.8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
330.00
330.00
330.00
330.00
300.00
590.00
710.00
710.00
380.00
350.00
330.00
330.00
330.00
330.00
330.00
330.00
330.00
270.00
270.00
690.00
810.00
810.00
810.00
450.00
440.00
380.00
380.00
380.00
380.00
380.00
380.00
380.00
330.00
330.00
860.00
860.00
860.00
650.00
560.00
550.00
1,150.00
800.00
740.00
740.00
780.00
740.00
740.00
THOMAPOR®-High-Chem Polymer Membranes
General technical specification
•Material: PA (polyamide); PESH (polyether sulfone,
hydrophilic) PS (polysulfone); PAEK (polyacryl etherketone)
Filtration
THOMAPOR®-Polymer Membrane - round blank
Item
​
303010
303022
1
Max. op.
pressure 11
bar
Max.
temp.
°C
pH
range
​
Max. flow
rate liquids2
l/h
30
10
50
70
4 - 11
1 - 13
200
250
at +20 °C 2 Water (l/h x m2 x bar)
Item
​
303010
303022
Cut off
kDalton
Material
​
Outside Ø
mm
Unit
piece
Price
EURO
0.2
20
PA
PS
76
76
25
25
194.00
194.00
THOMAPOR®-High-Chem Polymer Membrane cutting
Item
​
302983
302984
302985
302986
302987
302988
302989
302990
302991
302992
302993
302994
302995
302996
302997
302998
302999
303000
303001
303002
303003
303004
1
Max. op.
pressure 11
bar
Max.
temp.
°C
pH
range
​
Max. flow
rate liquids2
l/h
100
100
50
50
30
30
25
25
15
15
10
10
10
10
10
10
10
10
10
10
10
10
50
50
50
50
50
50
50
50
50
50
70
70
70
70
70
70
70
70
70
70
70
70
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
4 - 11
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
1 - 13
40
40
70
70
200
200
300
300
310
310
520
520
630
630
850
850
250
250
800
800
1,200
1,200
at +20 °C 2 Water (l/h x m2 x bar)
​
THOMAPLAST® I - 2015 79
Separation Technology - Round Filters and Membranes
Filtration
Technical specification
•Material: PVDF (polyvinylidene fluoride)
•Thickness: approx. 180 µm
•Pore size: 0.2 or 0.45 µm
•Max. temperature: +100 °C
•Sterilization: autoclavable (+121 °C)
Item
Item
​
302983
302984
302985
302986
302987
302988
302989
302990
302991
302992
302993
302994
302995
302996
302997
302998
302999
303000
303001
303002
303003
303004
Type
​
Cut off
kDalton
Material
​
Dimensions
mm
Price
EURO
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
0.05
0.05
0.1
0.1
0.2
0.2
0.5
0.5
2
2
4
4
50
50
100
100
20
20
100
100
100
100
PA
PA
PA
PA
PA
PA
PA
PA
PA
PA
PESH
PESH
PESH
PESH
PESH
PESH
PS
PS
PS
PS
PAEK
PAEK
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
225 x 250
450 x 500
200 x 300
450 x 500
200 x 300
450 x 500
125.00
335.00
125.00
335.00
125.00
335.00
125.00
335.00
125.00
335.00
95.00
280.00
95.00
280.00
95.00
280.00
95.00
280.00
95.00
280.00
105.00
300.00
THOMAPOR®-High-Chem Round Filter
made of PVDF - hydrophilic
Application area
•Fine filtration and sterile filtration of solutions and gases in areas of
analytical chemistry.
Product specification
•Chemically highly resistant, slightly hydrophilic round filter without
support body; biocompatible, free of leachable components.
​
Outside
Ø
Pore
size
​
mm
µm
15219
15220
15221
15222
15223
15224
15225
15227
15228
15229
15230
15231
15232
15233
13
25
37
47
50
90
142
13
25
37
47
50
90
142
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.45
0.45
0.45
0.45
0.45
0.45
0.45
1
Max.
Max.
Unit
flow rate flow rate
gases1 liquids2
l/min. ml/min. piece
1
1
1
1
1
1
1
2
2
2
2
2
2
2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
13.2
13.2
13.2
13.2
13.2
13.2
13.2
25
25
25
25
25
25
25
25
25
25
25
25
25
25
EURO
55.00
60.00
75.00
85.00
90.00
215.00
290.00
55.00
60.00
75.00
85.00
90.00
215.00
290.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-High-Chem Round Filter
made of PVDF - hydrophobic
Application area
•Fine filtration of solvents and gases in areas of analytical chemistry
and laboratory engineering.
Product specification
•Chemically highly resistant, hydrophobic round filter without support
body; biocompatible, free of leachable components.
Technical specification
•Material: PVDF (polyvinylidene fluoride)
•Thickness: approx. 180 µm
•Pore size: 0.45 µm
​
Item
​
15235
15236
15237
15238
15239
15240
15241
1
Outside
Ø
mm
Pore
size
µm
13
25
37
47
50
90
142
0.45
0.45
0.45
0.45
0.45
0.45
0.45
Max. flow
Unit
rate gases1
l/min.
piece
2
2
2
2
2
2
2
25
25
25
25
25
25
25
Air (l/min. x cm2 at 0.7 bar)
THOMAPOR®-High-Chem Round Filter
made of PTFE - sintered
Application area
•For all laboratory applications requiring unlaminated and stable membranes.
•Can be used as air filter, gas filter and liquid filter
80 THOMAPLAST® I - 2015
Price
Price
EURO
75.00
85.00
95.00
100.00
105.00
290.00
570.00
Separation Technology - Round Filters and Membranes
Filtration
THOMAPOR®-High-Chem Round Filter
made of PTFE - drawn
Product specification
•Hydrophobic
•High pore volume
•Outstandingly chemical-resistant and stable to solvents
•High thermal resistance
•Mechanically stable
•Self-sealing, when clamped between flanges
•Biocompatible and rotting-resistant
•Weldable, self-cleaning and non-inflammable
Application area
•Fine filtration of chemically aggressive media and solvents, also
halogen-containing solvents
•Sterile filtration, purification of gases
Product specification
•Hydrophobic
•Outstandingly chemical-resistant and stable to solvents
•Regular pore size and narrow-ranged pore size distribution
•Strong, flexible and great thermal resistance
•Universally applicable, non-inflammable and self-sealing
•Inert to fungal and bacterial growth
•Weldable
Technical specification
•Material: sliced polytetrafluoroethylene (PTFE)
•Thickness: depending on type 100 to 250 µm
•Pore volume: >40 %
•Temperature range: -260 to +260 °C
•Sterilization: by autoclaving
​
Technical specification
•Material: drawn polytetrafluoroethylene (PTFE)
•Colour: white, smooth surface
•Thickness: depending on type 60 to 100 µm
•Pore size: 0.1; 0.2; 0.65; 0.8; 1.2 or 5 µm
•Temperature range: -260 to +250 °C
•Melting point: +327 °C
•Sterilization: autoclavable (+121 °C)
•Tensile strength: 250 - 350 kg/cm2
•Stretchability: 200 - 400 %
​
Item
Outside Ø
Pore
size
​
mm
µm
15310
15311
15312
15313
15314
15315
15316
15317
15302
15303
15304
15305
15306
15307
15308
15309
15294
15295
15296
15297
15298
15299
15300
15301
15288
13
25
37
47
50
54
90
142
13
25
37
47
50
54
90
142
13
25
37
47
50
54
90
142
47
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
4-5
4-5
4-5
4-5
4-5
4-5
4-5
4-5
5-6
5-6
5-6
5-6
5-6
5-6
5-6
5-6
10 - 20
1
Thick- Max.
Max.
Unit Price
ness flow rate flow rate
gases liquids1
µm
l/h
ml/min. piece EURO
254
254
254
254
254
254
254
254
152
152
152
152
152
152
152
152
100
100
100
100
100
100
100
100
100
19
19
19
19
19
19
19
19
112
112
112
112
112
112
112
112
140
140
140
140
140
140
140
140
180
Water (ml/min. x cm2 at 0.9 bar) 2 for ethanol
100
100
100
100
100
100
100
100
224
224
224
224
224
224
224
224
300
300
300
300
300
300
300
300
430
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
75.00
85.00
95.00
105.00
110.00
110.00
255.00
510.00
75.00
85.00
95.00
105.00
110.00
110.00
255.00
510.00
75.00
85.00
95.00
105.00
110.00
110.00
255.00
510.00
105.00
Item
Outside Ø
Pore
size
​
mm
µm
15326
15327
15328
15329
15330
15331
15332
15335
15350
15351
15352
15353
15354
15355
15356
15361
15366
15367
15368
13
25
37
47
50
90
142
25
13
25
37
47
50
90
142
47
13
25
37
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.8
1
1
1
Thick- Max.
Max.
Unit Price
ness flow rate flow rate
gases1 liquids2
µm
l/min. ml/min. piece EURO
60
60
60
60
60
60
60
60
80
80
80
80
80
80
80
100
100
100
100
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.8
9
9
9
9
9
9
9
12
13
13
13
32
32
32
32
32
32
32
65
190
190
190
190
190
190
190
270
450
450
450
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
105.00
120.00
140.00
155.00
155.00
400.00
805.00
120.00
105.00
120.00
140.00
155.00
155.00
400.00
805.00
155.00
105.00
120.00
140.00
THOMAPLAST® I - 2015 81
Separation Technology - Round Filters and Membranes
Item
Outside Ø
Pore
size
​
mm
µm
15369
15370
15371
15372
15374
15375
15376
15377
15378
15380
15381
47
50
90
142
13
25
37
47
50
90
142
1
1
1
1
5
5
5
5
5
5
5
1
Thick- Max.
Max.
Unit Price
ness flow rate flow rate
gases1 liquids2
µm
l/min. ml/min. piece EURO
100
100
100
100
100
100
100
100
100
100
100
13
13
13
13
30
30
30
30
30
30
30
450
450
450
450
1,300
1,300
1,300
1,300
1,300
1,300
1,300
25
25
25
25
25
25
25
25
25
25
25
155.00
155.00
400.00
805.00
105.00
120.00
140.00
155.00
155.00
400.00
805.00
Air (l/min. x cm2 at 0.9 bar) 2 Aceton (ml/min. x cm2 at 0.9 bar)
THOMAPOR®-High-Chem Round Filter made of PTFE
Application area
•Filter membranes for filtration of critical media in laboratory and
process filtration.
•For air, gas and aerosol filtration.
Product specification
•The material is resistant to strongest organic and inorganic compounds.
•Test and process temperatures up to +260 °C do not cause any
problems just as use at the freezing point.
•The membranes feature a homogeneous honeycombed pore structure;
the material is pure PTFE resin, tightly spun thus ruling out detaching
of membrane fibres or particles.
•Due to the structure characteristics the membrane is best suited for
deep-bed filtration just as for surface filtration.
•THOMAPOR®-PTFE membranes meet highest requirements and are
used with THOMAPLAST®-filter holders made of PFA
Filtration
ZITEX®-High-Chem Round Filter made of PTFE
Product specification
•Ultra-pure; chemically inert
•Use for filtration of corrosive liquids or gases up to +204 °C, depending on application
•Compatible with virtually all solutions, non-clogging
•Fine and extra-fine grades may shrink at temperatures above +66 °C.
•Zitex® membranes act as „depth filters“ with high retention efficiency
and non-clogging characteristics. They are used for filtration of
corrosive and other aggressive chemicals or gases up to +204 °C.
Unlike cellulose filter paper, the PTFE interstices are bonded together
resulting in a stabilized pore configuration. This unique combination of
depth filter and screen characteristics creates a highly effective filter
media. Zitex® membranes have a better controlled pore size distribution than other high temperature, chemically resistant membranes with
similar pore size ratings.
•Zitex® filters are strong enough to be self supporting and may be used
without any additional backing material, which could compromise
results. The non-stick nature of Zitex® provides excellent filter cake
release properties.
•Zitex® may be sterilized with steam or bactericidal solutions. It is
suitable for chromatography solvent filtration and degassing. Zitex®
membranes are inherently hydrophobic, which makes them ideal as
venting devices. However, aqueous solutions may be filtered by using
pressures exceeding the membrane’s water initiation pressure, or
with the aid of wetting agents, such as methanol or ethanol. Disks are
interleaved with separators for cleanliness and ease of handling.
​
​
Item
​
Item
​
72546
72547
72537
72538
72539
72545
72540
72541
72542
72543
Outside Ø
mm
Pore size
µm
Thickness
mm
Unit
piece
Price
EURO
47
47
47
47
47
47
50
50
50
50
0.2
0.45
1-2
5-6
20 - 30
30 - 60
1-2
5-6
20 - 30
30 - 60
0.65
0.07
0.25
0.1
0.14
0.2
0.25
0.1
0.14
0.2
10
10
10
10
10
10
10
10
10
10
185.00
185.00
98.00
98.00
98.00
98.00
106.00
106.00
106.00
106.00
82 THOMAPLAST® I - 2015
602921
602971
603021
603071
603121
60302
60307
60312
60293
60298
60303
60308
60304
60309
60300
60305
60310
60306
Outside
Ø
mm
Pore
size
µm
Thickness
mm
47
47
47
47
47
75
75
75
90
90
90
90
110
110
125
125
125
150
1-3
3-5
10 - 20
20 - 30
30 - 60
10 - 20
20 - 30
30 - 60
1-3
3-5
10 - 20
20 - 30
10 - 20
20 - 30
3-5
10 - 20
20 - 30
10 - 20
0.25
0.2
0.13
0.15
0.18
0.13
0.15
0.18
0.25
0.2
0.13
0.15
0.13
0.15
0.2
0.13
0.15
0.13
Max. flow
Unit
rate liquids1
ml/min.
piece
120
200
320
620
1,800
320
620
1,800
120
200
320
620
320
620
200
320
620
320
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
Price
EURO
115.00
115.00
115.00
115.00
115.00
151.00
151.00
151.00
196.00
196.00
196.00
196.00
239.00
239.00
207.00
207.00
207.00
167.00
Separation Technology - Round Filters and Membranes
Item
​
60311
60316
1
Outside
Ø
mm
Pore
size
µm
Thickness
mm
150
150
20 - 30
30 - 60
0.15
0.18
Max. flow
Unit
rate liquids1
ml/min.
piece
620
1,800
5
5
Price
EURO
Filtration
Item
​
94473
94420
94421
94422
94423
94424
94425
94426
94427
94475
94476
94477
94431
94435
94439
94454
94432
94436
94440
94455
94433
94437
94441
94456
167.00
167.00
Water (ml/min. x cm2 x bar) 2 for ethanol
THOMAPOR®-Filters made of PVC
Application area
•For production of ultrapure water of 1-18 megohm quality.
•Microfiltration; suspension of starch, resins, activated carbon; precipitation of proteins, barium sulfate, silicic acid. Bacteria and spores are
retained completely allowing sterile preparation of water and air for
enzymes, sterile rooms and bacteriological cultures. For collection of
dust samples in the air.
•In food processing and beverage industry as well as in the pharmaceutical industry.
•Filtration of drinking water, for filtration of organic materials and
recovery of noble metals from electroplating solutions.
•Pretreatment for reverse osmosis.
General product specification
•High filtration precision:
•The membrane filters have a regular pore size distribution allowing
precise filtration.
•Wide pore size range:
•The membrane filters are available with pore sizes 0.1; 0.2; 0.4 and
0.9 µm. Pore sizes are verified with „mercury intrusion“ and „bubble
point test“.
•Flexibility and high mechanical stability:
•The membrane filters maintain their physical properties even in
strongly altered working conditions.
•No shape change during boiling test:
•Longer exposition to boiling water has no impact on the physical
properties of the membrane filters.
•Autoclaving:
•The membrane filters are temperature-resistant up to +125 °C and
insensitive to commonly used hot sterilization procedures such as
autoclaving or in-situ steam sterilization.
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
13
25
25
25
25
47
47
47
47
50
50
50
55
55
55
55
70
70
70
70
90
90
90
90
0.9
0.1
0.2
0.4
0.9
0.1
0.2
0.4
0.9
0.2
0.4
0.9
0.1
0.2
0.4
0.9
0.1
0.2
0.4
0.9
0.1
0.2
0.4
0.9
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
50
25
25
25
35.00
45.00
45.00
45.00
45.00
80.00
80.00
80.00
80.00
90.00
90.00
90.00
100.00
100.00
100.00
100.00
130.00
130.00
130.00
130.00
180.00
180.00
180.00
180.00
THOMAPOR®-Filter Cutting made of PVC
​
Item
​
94430
94434
94438
Pore size
µm
Dimensions
mm
Unit
piece
Price
EURO
0.1
0.2
0.4
300 x 300
300 x 300
300 x 300
1
1
1
192.00
192.00
192.00
THOMAPOR®-Filter Plate made of PVC
​
General technical specification
•Max. temperature: +90 °C, for a short time up to +105 °C
•pH range: 1 - 12 at +35 °C
•Hot air resistance: up to +125 °C
​
THOMAPOR®-Round Filter made of PVC
​
Item
​
Item
​
94471
94472
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
13
13
0.2
0.4
50
50
35.00
35.00
94446
94447
94448
94458
94449
94450
94451
94459
Pore size
µm
Width
mm
Unit
m
Price
EURO
0.1
0.2
0.4
0.9
0.1
0.2
0.4
0.9
300
300
300
300
600
600
600
600
15
15
15
15
15
15
15
15
1,118.00
1,118.00
1,118.00
1,118.00
2,043.00
2,043.00
2,043.00
2,043.00
THOMAPLAST® I - 2015 83
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
Screen Cloths, Filter Cloths,
Fleeces and Mats
THOMAPOR®-Screen Cloth made of Polyester
Application area
•Cloth for screening and filtering purposes
General product specification
•Polyester monofilament (PET) features high weave quality, precision
and regularity of mesh sizes. The cloth is insensitive to vibrations and
highly resistant to fatigue caused by vibrations and bending. It does
not crack and features very high abrasion resistance and resilience.
•Moderate abrasion and hydrolysis resistance
•Good resistance to solvents and acids
•Poor UV-resistance
General technical specification
•Material: polyester
•Density: 1.38 g/mm3
•Tensile strength: 45 - 75 daN/mm2
•Relative strength
at wet conditions: 100 %
•Elongation at break: 15 - 30 %
•Moisture uptake: 0.4 % (at +20 °C and 65 % r.h.)
•Melting point: +255 °C
•Softening temperature: +230 °C
•Temperature range: -75 to +150 °C (dry heat resistance at permanent load up to +150 °C)
​
THOMAPOR®-Screen Cloth made of Polyester cutting
Product specification
•Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
​
Item
Ø
thread
µm
Open
area
%
Thickness
µm
Dimensions
​
Mesh
size
µm
cm
EURO
95801
95802
95803
95804
95805
95806
95807
95808
95809
95810
4,000
3,000
2,200
2,000
1,600
1,410
1,000
840
800
710
1,000
800
800
800
450
600
500
400
280
350
64
62
37.4
51
61
49
45
46
55
45
1,900
1,480
1,450
1,500
840
1,300
1,000
785
520
745
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
44.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
84 THOMAPLAST® I - 2015
Price
Filtration
Ø
thread
µm
Open
area
%
Thickness
µm
Dimensions
​
Mesh
size
µm
Price
cm
EURO
95811
95812
95813
95814
95815
95816
95817
95818
95819
95820
95821
95822
95823
95824
95825
95826
95827
95828
95830
95831
95832
95833
95834
95835
95836
95837
95838
95839
95840
95841
95842
95843
95844
95845
95846
95847
95848
95849
95850
95851
95852
95853
95854
95855
95856
95857
600
500
400
300
250
200
150
100
90
80
73
59
51
40
33
31
20
11
4,000
3,000
2,200
2,000
1,600
1,410
1,000
840
800
710
600
500
400
300
250
200
150
100
90
80
73
59
51
40
33
31
20
11
245
220
188
143
152
104
86
77
72
62
43
44
38
40
40
46
37
38
1,000
800
800
800
450
600
500
400
280
350
245
220
188
143
152
104
86
77
72
62
43
44
38
40
40
46
37
38
51
48
48
46
39
43
41
32
31
32
40
33
33
25
20.5
16.5
13
5
64
62
37.4
51
61
49
45
46
55
45
51
48
48
46
39
43
41
32
31
32
40
33
33
25
20.5
16.5
13
5
450
410
335
245
290
170
140
125
115
90
65
65
60
60
60
75
60
60
1,900
1,480
1,450
1,500
840
1,300
1,000
785
520
745
450
410
335
245
290
170
140
125
115
90
65
65
60
60
60
75
60
60
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
49.00
49.00
49.00
49.00
64.00
67.00
72.00
100.00
110.00
187.00
167.00
167.00
167.00
167.00
177.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
177.00
177.00
177.00
192.00
205.00
261.00
292.00
356.00
407.00
458.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
THOMAPOR®-Screen Cloth made of Polyester round blank
Item
​
​
Item
​
95858
95859
95860
95861
95862
95863
95864
95865
95866
95867
95868
95869
95870
95873
95874
95875
95876
95877
95878
95879
95880
95881
95882
95883
95884
95885
95886
95887
95888
95889
95890
95891
95892
95893
95894
95895
95896
95897
95898
95899
95900
95901
Outside Mesh
Ø
Open
Ø
size thread area
mm
µm
µm
%
13
13
13
13
13
13
13
13
13
13
13
13
13
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
47
47
47
47
47
47
47
47
47
47
47
47
47
47
11
20
31
40
59
80
100
200
300
500
710
800
1,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
2,000
3,360
11
20
31
40
59
80
100
200
300
500
710
800
1,000
2,000
38
37
46
40
44
62
77
104
143
220
350
280
500
38
37
46
40
44
62
77
104
143
220
350
280
500
800
1,000
38
37
46
40
44
62
77
104
143
220
350
280
500
800
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
51
59.5
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
51
Thick- Unit
ness
µm piece
60
60
75
60
65
90
125
170
245
410
745
520
1,000
60
60
75
60
65
90
125
170
245
410
745
520
1,000
1,500
2,045
60
60
75
60
65
90
125
170
245
410
745
520
1,000
1,500
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Price
EURO
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
130.00
130.00
130.00
200.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
170.00
170.00
170.00
170.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
95903
95904
95905
95906
95907
95908
95909
95910
95911
95912
95913
95914
95915
95916
95918
95919
95920
95921
95922
95923
95924
95925
95926
95927
95928
95929
95930
95931
95932
95933
95934
95935
95936
95937
95938
95939
95940
95941
95942
95943
95944
95945
95948
95949
95950
95951
95952
95953
95954
95955
95956
95957
95958
95959
95960
Filtration
Outside Mesh
Ø
Open
Ø
size thread area
mm
µm
µm
%
50
50
50
50
50
50
50
50
50
50
50
50
50
50
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
100
100
100
100
100
100
100
100
100
100
100
100
100
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
11
20
31
40
59
80
100
200
300
500
710
800
1,000
2,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
2,000
3,360
11
20
31
40
59
80
100
200
300
500
710
800
1,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
38
37
46
40
44
62
77
104
143
220
350
280
500
800
38
37
46
40
44
62
77
104
143
220
350
280
500
800
1,000
38
37
46
40
44
62
77
104
143
220
350
280
500
38
37
46
40
44
62
77
104
143
220
350
280
500
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
51
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
51
59.5
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
Thick- Unit
ness
µm piece
60
60
75
60
65
90
125
170
245
410
745
520
1,000
1,500
60
60
75
60
65
90
125
170
245
410
745
520
1,000
1,500
2,045
60
60
75
60
65
90
125
170
245
410
745
520
1,000
60
60
75
60
65
90
125
170
245
410
745
520
1,000
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Price
EURO
170.00
170.00
170.00
170.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
300.00
300.00
300.00
248.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
250.00
250.00
250.00
250.00
175.00
175.00
175.00
175.00
175.00
175.00
175.00
175.00
175.00
271.00
271.00
271.00
271.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
THOMAPLAST® I - 2015 85
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
95978
95979
95980
95981
95982
95983
95984
95985
95986
95987
95988
95989
95990
95993
95994
95995
95996
95997
95998
95999
96000
96001
96002
96003
96004
96005
96008
96009
96010
96011
96012
96013
96014
96015
96016
96017
96018
96019
96020
96048
96049
96050
96051
96052
96053
96054
96055
96056
96057
96058
96059
96060
Outside Mesh
Ø
Open
Ø
size thread area
mm
µm
µm
%
110
110
110
110
110
110
110
110
110
110
110
110
110
142
142
142
142
142
142
142
142
142
142
142
142
142
200
200
200
200
200
200
200
200
200
200
200
200
200
293
293
293
293
293
293
293
293
293
293
293
293
293
11
20
31
40
59
80
100
200
300
500
710
800
1,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
11
20
31
40
59
80
100
200
300
500
710
800
1,000
38
37
46
40
44
62
77
104
143
220
350
280
500
38
37
46
40
44
62
77
104
143
220
350
280
500
38
37
46
40
44
62
77
104
143
220
350
280
500
38
37
46
40
44
62
77
104
143
220
350
280
500
86 THOMAPLAST® I - 2015
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
5
12.5
16.5
25
33
32
32
43
46
48
45
55
45
Thick- Unit
ness
µm piece
60
60
75
60
65
90
125
170
245
410
745
520
1,000
60
60
75
60
65
90
125
170
245
410
745
520
1,000
60
60
75
60
65
90
125
170
245
410
745
520
1,000
60
60
75
60
65
90
125
170
245
410
745
520
1,000
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Filtration
Price
THOMAPOR®-Screen Cloth made of Polyamide
EURO
Application area
228.00
228.00
228.00
205.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
167.00
254.00
254.00
254.00
228.00
190.00
190.00
190.00
190.00
190.00
190.00
190.00
190.00
190.00
537.00
537.00
537.00
430.00
277.00
277.00
277.00
277.00
277.00
243.00
243.00
243.00
243.00
959.00
959.00
959.00
634.00
392.00
392.00
392.00
392.00
392.00
356.00
356.00
356.00
356.00
•Cloth for screening and filtering purposes
General product specification
•Monofil nylon cloth featuring high weave quality, precision and
regularity of mesh sizes. It is insensitive to vibrations, highly resistant
to fatigue caused by vibrating or bending and does not crack.
•Turning yellow and reduction of stability depending on temperature
and exposure time
•The cloth features very high abrasion resistance, good hydrolysis
resistance and resilience.
•Poor UV-resistance
•Chemical features:
Solvent resistance: Good resistance to organic solvents except to
dimethylformamide, aniline, cyclohexanone, hot o-dichlorobenzene,
phenols and cold m-cresol.
Resistance to acids: Is destroyed in cold hydrochloric acid, sulfuric
acid, and formic acid etc. depending on concentration.
Resistance to alkalis: Very good resistance to alkalis at room temperature.
General technical specification
•Material: PA 6.6 (polyamide 6.6)
•Density: 1.14 g/mm3
•Tensile strength: 41 - 67 daN/mm2
•Relative strength at wet conditions: 85 - 90 %
•Elongation at break: 20 - 35 %
•Moisture uptake: 3.5 - 4 % (at +20 °C and 65 % r.h.)
•Melting point: +250 °C
•Softening temperature: +230 °C
•Temperature range: -40 to +115 °C (turning yellow above +100 °C)
​
THOMAPOR®-Screen Cloth made of Polyamide cutting
Product specification
•Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
​
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
Thick- Dimensions Price
ness
µm
cm
EURO
948301
948311
948321
948331
948341
948351
948361
948371
948381
2,000
1,000
700
500
400
300
250
200
150
750
515
265
315
250
215
180
150
95
53
43.5
52.5
37.5
38
33.5
34
33
37.5
1,450
1,040
485
580
450
390
290
265
155
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
49.00
41.00
41.00
41.00
41.00
41.00
41.00
41.00
47.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
Thick- Dimensions Price
ness
µm
cm
EURO
948391
948401
948411
948421
948431
948441
948451
948461
948471
948302
948312
948322
948332
948342
948352
948362
948372
948382
948392
948402
948412
948422
948432
948442
948452
948462
948472
100
80
60
50
41
30
20
11
5
2,000
1,000
700
500
400
300
250
200
150
100
80
60
50
41
30
20
11
5
77
52
47
40
33
41
34
36
37
750
515
265
315
250
215
180
150
95
77
52
47
40
33
41
34
36
37
32
37
31.5
31
31
18
14
6
1
53
43.5
52.5
37.5
38
33.5
34
33
37.5
32
37
31.5
31
31
18
14
6
1
125
180
75
60
50
60
55
65
100
1,450
1,040
485
580
450
390
290
265
155
125
180
75
60
50
60
55
65
100
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
47.00
47.00
52.00
52.00
59.00
67.00
85.00
95.00
110.00
172.00
146.00
146.00
146.00
146.00
146.00
146.00
146.00
151.00
169.00
192.00
202.00
210.00
292.00
305.00
376.00
404.00
499.00
THOMAPOR®-Screen Cloth made of Polyamide round blank
​
Item
​
95580
95581
95582
95583
95584
95585
95586
95587
95588
95589
Outside
Ø
mm
13
13
13
13
13
13
13
13
13
13
Mesh
Ø
Open
size thread area
µm
µm
%
5
11
20
30
41
50
60
80
100
150
37
36
34
41
33
40
47
52
77
95
1
6
14
18
31
31
31.5
37
32
37.5
Thick- Unit
ness
µm piece
100
65
55
60
50
60
75
80
125
155
100
100
100
100
100
100
100
100
100
100
Price
EURO
110.00
110.00
110.00
110.00
103.00
103.00
103.00
103.00
103.00
103.00
Item
​
95590
95591
95594
95595
95596
95597
95598
95599
95600
95601
95602
95603
95604
95606
95608
95609
95610
95611
95612
95613
95614
95615
95616
95617
95618
95620
95622
95623
95624
95625
95626
95627
95628
95629
95630
95631
95632
95634
95636
95637
95638
95639
95640
95641
95642
95643
95644
95645
95646
95650
95651
95652
95653
95654
95655
Filtration
Outside
Ø
mm
13
13
25
25
25
25
25
25
25
25
25
25
25
25
47
47
47
47
47
47
47
47
47
47
47
47
50
50
50
50
50
50
50
50
50
50
50
50
76
76
76
76
76
76
76
76
76
76
76
100
100
100
100
100
100
Mesh
Ø
Open
size thread area
µm
µm
%
Thick- Unit
ness
µm piece
200
700
5
11
20
30
41
50
60
80
100
150
200
1,000
5
11
20
30
41
50
60
80
100
150
200
1,000
5
11
20
30
41
50
60
80
100
150
200
1,000
5
11
20
30
41
50
60
80
100
150
200
5
11
20
30
41
50
265
485
100
65
55
60
50
60
75
80
125
155
265
1,040
100
65
55
60
50
60
75
80
125
155
265
1,040
100
65
55
60
50
60
75
80
125
155
265
1,040
100
65
55
60
50
60
75
80
125
155
265
100
65
55
60
50
60
150
265
37
36
34
41
33
40
47
52
77
95
150
515
37
36
34
41
33
40
47
52
77
95
150
515
37
36
34
41
33
40
47
52
77
95
150
515
37
36
34
41
33
40
47
52
77
95
150
37
36
34
41
33
40
33
52.5
1
6
14
18
31
31
31.5
37
32
37.5
33
43.5
1
6
14
18
31
31
31.5
37
32
37.5
33
43.5
1
6
14
18
31
31
31.5
37
32
37.5
33
43.5
1
6
14
18
31
31
31.5
37
32
37.5
33
1
6
14
18
31
31
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
Price
EURO
103.00
103.00
123.00
123.00
123.00
123.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
170.00
170.00
170.00
170.00
144.00
144.00
144.00
144.00
144.00
144.00
144.00
144.00
184.00
184.00
184.00
170.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
300.00
300.00
300.00
230.00
180.00
180.00
180.00
180.00
180.00
180.00
180.00
270.00
270.00
270.00
240.00
190.00
190.00
THOMAPLAST® I - 2015 87
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
95656
95657
95658
95659
95660
95661
95662
95664
95665
95666
95667
95668
95669
95670
95672
95673
95674
95675
95676
95678
95679
95680
95681
95682
95683
95684
95686
95687
95688
95689
95690
95692
95693
95694
95695
95696
95697
95698
95699
95700
95701
95702
95703
95704
95706
95707
95708
95709
95710
95711
95712
95713
95714
95715
95716
Outside
Ø
mm
100
100
100
100
100
100
100
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
107.5
110
110
110
110
110
110
110
110
110
110
110
110
142
142
142
142
142
142
142
142
142
142
142
142
142
200
200
200
200
200
200
200
200
200
200
200
Mesh
Ø
Open
size thread area
µm
µm
%
Thick- Unit
ness
µm piece
60
80
100
150
200
700
1,000
5
11
20
30
41
50
60
100
150
200
700
1,000
5
11
20
30
41
50
60
100
150
200
700
1,000
5
11
20
30
41
50
60
80
100
150
200
700
1,000
5
11
20
30
41
50
60
80
100
150
200
75
80
125
155
265
485
1,040
100
65
55
60
50
60
75
125
155
265
485
1,040
100
65
55
60
50
60
75
125
155
265
485
1,040
100
65
55
60
50
60
75
80
125
155
265
485
1,040
100
65
55
60
50
60
75
80
125
155
265
47
52
77
95
150
265
515
37
36
34
41
33
40
47
77
95
150
265
515
37
36
34
41
33
40
47
77
95
150
265
515
37
36
34
41
33
40
47
52
77
95
150
265
515
37
36
34
41
33
40
47
52
77
95
150
88 THOMAPLAST® I - 2015
31.5
37
32
37.5
33
52.5
43.5
1
6
14
18
31
31
31.5
32
37.5
33
52.5
43.5
1
6
14
18
31
31
31.5
32
37.5
33
52.5
43.5
1
6
14
18
31
31
31.5
37
32
37.5
33
52.5
43.5
1
6
14
18
31
31
31.5
37
32
37.5
33
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Price
Item
EURO
​
190.00
190.00
190.00
190.00
190.00
190.00
190.00
260.00
260.00
260.00
208.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
300.00
300.00
300.00
215.00
200.00
200.00
200.00
195.00
200.00
200.00
200.00
200.00
275.00
275.00
275.00
235.00
225.00
215.00
215.00
215.00
215.00
215.00
215.00
215.00
225.00
600.00
600.00
600.00
450.00
325.00
315.00
325.00
315.00
315.00
315.00
315.00
Filtration
Outside
Ø
mm
95717
95718
95720
95721
95722
95723
95724
95725
95726
95729
95730
95731
95732
200
200
293
293
293
293
293
293
293
293
293
293
293
Mesh
Ø
Open
size thread area
µm
µm
%
Thick- Unit
ness
µm piece
700
1,000
5
11
20
30
41
50
60
150
200
700
1,000
485
1,040
100
65
55
60
50
60
75
155
265
485
1,040
265
515
37
36
34
41
33
40
47
95
150
265
515
52.5
43.5
1
6
14
18
31
31
31.5
37.5
33
52.5
43.5
25
25
25
25
25
25
25
25
25
25
25
25
25
Price
EURO
325.00
325.00
975.00
975.00
975.00
675.00
450.00
450.00
450.00
375.00
375.00
375.00
375.00
THOMAPOR®-Screen Cloth
made of Polyamide (antistatic) - cutting
Product specification
•The screen cloth in antistatic design is particularly suited for screening
of dry and electrostatically chargeable materials due to incorporated
electrically conductive threads (no clogging, thus no danger of electrical discharge and sparking).
•Advantages compared to metal fabrics: more application possibilities,
lower weight, mechanical and elastic properties of a standard PA 6.6
synthetic fabric.
•Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format (other lengths are available on request)
Technical specification
•Colour: silver (optically, under microscope alternately black and white
threads are visible)
•Resistivity: <1 x 104 to <1 x 106 ohm
​
Item
​
9486011
948611
948621
948631
948641
9486512
9486021
948612
948622
948632
Mesh
size
µm
Ø
thread
µm
Open
area
%
82
105
120
160
245
510
82
105
120
160
52
43
43
80
120
220
52
43
43
80
37
40
42
44
45
45
37
40
42
44
Thick- Dimensions Price
ness
µm
cm
EURO
92
125
135
148
230
330
92
125
135
148
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
108 x 102
136 x 102
136 x 102
158 x 102
55.00
52.00
49.00
47.00
43.00
40.00
220.00
207.00
199.00
189.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
948642
9486522
1
Mesh
size
µm
Ø
thread
µm
Open
area
%
245
510
120
220
45
45
Thick- Dimensions Price
ness
µm
cm
EURO
230
330
Filtration
THOMAPOR®-Screen Cloth made of Polypropylene round blank
​
115 x 102 173.00
115 x 102 163.00
Colour: black 2 Material: PA6
THOMAPOR®-Screen Cloth made of Polypropylene
Application area
•Cloth for screening and filtering purposes
General product specification
•Polypropylene monofilament features high weave quality, precision
and regularity of mesh sizes. The cloth scarcely shows signs of fatigue
and features good abrasion resistance.
•Good resistance to solvents, acids and alkalis
•Poor UV-resistance
General technical specification
•Material: PP
•Density: 0.91 g/mm3
•Tensile strength: 35 - 62 daN/mm2
•Relative strength at wet conditions: 100 %
•Elongation at break: 20 - 50 %
•Moisture uptake: 0 % (at +20 °C and 65 % r.h.)
•Melting point: +170 °C
•Softening temperature: +150 °C
•Temperature range: -30 to +90 °C, for a short time up to +120 °C
​
THOMAPOR®-Screen Cloth made of Polypropylene cutting
Product specification
•Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
​
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
948201
948211
948221
948231
948241
948202
948212
948222
948232
948242
2,000
1,000
500
250
105
2,000
1,000
500
250
105
800
500
340
215
165
800
500
340
215
165
51
45
36
29
16
51
45
36
29
16
Thick- Dimensions Price
ness
µm
cm
EURO
1,310
1,020
610
430
360
1,310
1,020
610
430
360
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
47.00
47.00
47.00
47.00
47.00
185.00
185.00
185.00
185.00
192.00
Item
​
95735
95736
95737
95738
95739
95741
95742
95743
95744
95746
95748
95749
95750
95751
95754
95755
95756
95757
95760
95761
95762
95763
95764
95766
95767
95768
95769
95772
95773
95774
95775
95777
95778
95779
95780
95781
95783
95784
95785
95786
95787
95788
Outside
Ø
mm
13
13
13
13
13
25
25
25
25
25
47
47
47
47
50
50
50
50
76
76
76
76
76
100
100
100
100
107.5
107.5
107.5
107.5
110
110
110
110
110
142
142
142
142
142
142
Mesh
Ø
Open
size thread area
µm
µm
%
Thick- Unit
ness
µm piece
75
105
250
500
1,000
75
105
250
500
2,000
105
250
500
1,000
105
250
500
1,000
105
250
500
1,000
2,000
105
250
500
1,000
105
250
500
1,000
75
105
250
500
1,000
75
105
250
500
1,000
2,000
195
360
430
500
1,020
195
360
430
500
1,310
360
430
500
1,020
360
430
500
1,020
360
430
500
1,020
1,310
360
430
500
1,020
360
430
500
1,020
195
360
430
500
1,020
195
360
430
500
1,020
1,310
85
165
215
320
500
85
165
215
320
800
165
215
320
500
165
215
320
500
165
215
320
500
800
165
215
320
500
165
215
320
500
85
165
215
320
500
85
165
215
320
500
800
21
16
29
37
45
21
16
29
37
51
16
29
37
45
16
29
37
45
16
29
37
45
51
16
29
37
45
16
29
37
45
21
16
29
37
45
21
16
29
37
45
51
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
Price
EURO
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
130.00
130.00
130.00
130.00
160.00
160.00
160.00
160.00
170.00
170.00
170.00
170.00
170.00
190.00
190.00
190.00
190.00
200.00
200.00
200.00
200.00
218.00
218.00
218.00
218.00
218.00
240.00
240.00
240.00
240.00
240.00
240.00
THOMAPLAST® I - 2015 89
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
95790
95791
95792
95793
95796
95797
95798
95799
Outside
Ø
mm
200
200
200
200
293
293
293
293
Mesh
Ø
Open
size thread area
µm
µm
%
Thick- Unit
ness
µm piece
105
250
500
1,000
105
250
500
1,000
360
430
500
1,020
360
430
500
1,020
165
215
320
500
165
215
320
500
16
29
37
45
16
29
37
45
25
25
25
25
25
25
25
25
Price
Item
EURO
Filtration
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
Thick- Dimensions Price
ness
µm
cm
EURO
948581
948502
948512
948522
948532
948542
948552
948562
948572
948582
70
1,000
850
500
300
250
150
120
105
70
80
515
275
280
215
152
105
80
80
80
21.7
45
58
42
36
39
36
36
32.2
21.7
158
1,000
505
500
385
290
200
145
155
158
305.00
305.00
305.00
305.00
433.00
433.00
433.00
433.00
THOMAPOR®-Screen Cloth made of FEP
20 x 29
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
100 x 102
Application area
THOMAPOR®-Screen Cloth made of PVDC
Product specification
Application area
•Cloth for screening and filtering purposes
•FEP (fluorinated ethylene-propylene copolymer) featuring high weaving
quality, precision and regularity of mesh sizes. The mechanical loadability is excellent, symptoms of fatique not known.
•Good abrasion resistance
•Good resistance to solvents, acids and alkalis
•Good UV-resistance
•Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
Technical specification
•Material: FEP
•Density: 1.75 g/mm3
•Tensile strength: 40 - 50 daN/mm2
•Relative strength
at wet conditions: 100 %
•Elongation at break: 25 %
•Moisture uptake: 0 % (at +20 °C and 65 % r.h.)
•Melting point: +270 °C
•Softening temperature: > +150 °C
•Temperature range: -190 to +150 °C
113.00
606.00
453.00
453.00
453.00
453.00
509.00
509.00
509.00
509.00
•Cloth for process, product and laboratory filtration, settling sludge
filtration, for use as air filter, for conveying belts and for making up of
bags, also usable as support and carrier cloth.
Product specification
•Best abrasion resistance
•No wet elongation
•UV-resistant
•Good resistance to light and colour stability
•Flame-resistant
•Best elastic properties
•Good resistance over the whole pH range
•Remarkable dimensional stability
Technical specification
•Material: PVDC (polyvinylidene chloride)
•Max. temperature: +80 °C, for a short time up to +115 °C
•Softening point: +116 to +137 °C
•Moisture uptake: >0.01 %
•Elongation at break: 20 - 30 % depending on count of yarn
​
​
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
Thick- Dimensions Price
ness
µm
cm
EURO
948501
93187
948511
948521
948531
948541
948551
948561
948571
1,000
1,000
850
500
300
250
150
120
105
515
412
275
280
215
152
105
80
80
45
55
58
42
36
39
36
36
32.2
1,000
800
505
500
385
290
200
145
155
90 THOMAPLAST® I - 2015
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
100.00
100.00
100.00
100.00
93.00
95.00
100.00
110.00
110.00
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
302912
302913
302914
302915
302916
302917
302918
302919
302920
3,500
2,200
2,000
1,200
950
700
600
600
500
1,500
900
600
380
300
380
380
300
230
49
50
59
58
61
42
37
44
47
Thick- Dimensions Price
ness
µm
cm
EURO
2,760
1,656
1,000
700
550
700
780
550
425
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
60.00
65.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
Item
​
Mesh
size
µm
Ø
thread
µm
Open
area
%
302921
302922
302923
302924
302925
302926
302927
302928
302929
302930
302931
302932
302933
302934
302935
302936
302937
302938
302939
302940
302941
302942
302943
302944
450
400
3,500
2,200
2,000
1,200
950
700
600
600
500
450
400
3,500
2,200
2,000
1,200
950
700
600
600
500
450
400
200
230
1,500
900
600
380
300
380
380
300
230
200
230
1,500
900
600
380
300
380
380
300
230
200
230
48
40
49
50
59
58
61
42
37
44
47
48
40
49
50
59
58
61
42
37
44
47
48
40
Thick- Dimensions Price
ness
µm
cm
EURO
370
425
2,760
1,656
1,000
700
550
700
780
550
425
370
425
2,760
1,656
1,000
700
550
700
780
550
425
370
425
25 x 25
25 x 25
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
55.00
55.00
155.00
160.00
125.00
125.00
125.00
125.00
125.00
125.00
125.00
125.00
125.00
335.00
390.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
Filtration
Technical specification
•Material: PVDF (polyvinylidene fluoride)
•Max. temperature: +120 °C, for a short time up to +140 °C
•Melting point: +175 °C
Item
​
302903
302904
302905
302906
302907
302908
302909
302910
302911
Mesh
size
µm
Ø
thread
µm
Open
area
%
800
500
250
800
500
250
800
500
250
250
250
150
250
250
150
250
250
150
58
44
39
58
44
39
58
44
39
Thick- Dimensions Price
ness
µm
cm
EURO
460
490
340
460
490
340
460
490
340
25 x 25
25 x 25
25 x 25
50 x 50
50 x 50
50 x 50
100 x 100
100 x 100
100 x 100
65.00
75.00
60.00
150.00
175.00
145.00
350.00
410.00
345.00
THOMAPOR®-Screen Cloth
made of Stainless Steel SS 314
Technical specification
•Cuttings: 30 x 60 cm and 20 x 29 cm
​
THOMAPOR®-Screen Cloth made of PVDF
Application area
•Cloth for process, product and laboratory filtration in nuclear and
reactor technology and chemical engineering, in aircraft manufacturing
and in space engineering, in petrochemistry, in machine building and
apparatus construction.
Product specification
•Heavy duty plastic
•Very good chemical resistance
•Excellent resistance to hydrolysis
•Good temperature resistance
•Low moisture uptake
•High mechanical stability
•High thermostability
•Very good radiation resistance
•Good stability to light
•Outstanding resistance to UV-radiation and weather
•Very good dimensional stability
•Physiologically absolutely safe
​
Item
​
948711
948721
948731
948741
948751
948761
948771
948781
948791
948801
948811
948712
948722
948732
948742
948752
948762
948772
948782
948792
948802
948812
Mesh size
µm
Open area
%
Dimensions
cm
Price
EURO
25
36
50
71
100
140
250
500
1,000
1,500
2,000
25
36
50
71
100
140
250
500
1,000
1,500
2,000
28
32
39
41
44
48
51
61
67
72
74
28
32
39
41
44
48
51
61
67
72
74
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
20 x 29
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
30 x 60
156.00
105.00
87.00
80.00
75.00
72.00
69.00
64.00
64.00
85.00
77.00
315.00
233.00
165.00
145.00
130.00
126.00
103.00
105.00
105.00
118.00
110.00
THOMAPLAST® I - 2015 91
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats
THOMAPOR®-Filter Cloth made of PE
Item
Application area
​
Product specification
332349
332350
332351
•For filtration of dusts out of the air
•Use in wet filtration e.g. in cheese dairy (cheese cloth)
•Light, outstandingly mechanical resistant quality, not fibrous
•The filter cloth can be either tied or knotted
1
Filtration
Thickness Max. flow Weight
rate gases1
mm
l/min.
g/m²
0.85
0.85
0.85
160
160
160
200
200
200
Dimensions
Price
mm
EURO
250 x 250
58.00
500 x 500
98.00
1.000 x 1.000 166.00
Air (l/min./10 cm2 at 10 cmWC)
​
THOMAPOR®-High-Tech Charcoal Fleece
made of PE - large-pored
Application area
•medical gassing systems, filter and face masks, combat filter systems, clean-room filter systems
Technical specification
Item
​
94886
1
Thickness Max. flow
rate gases1
µm
l/sec.
215
440
Weight
Dimensions
Price
g/m²
cm
EURO
132
102 x 100
112.00
•Material: PE (polyethylene)
•Colour: grey
•Design: charcoal-loaded fleece
•Pore size: 160 - 235 µm
•Charcoal component: 57 %, corresponds to 114 g/m2
​
Item
​
Air (l/sec. x m2 x bar)
332352
332353
332354
THOMAPOR®-High-Tech Charcoal Fleece
made of PE - fine-pored
1
Thickness Max. flow Weight
rate gases1
mm
l/min.
g/m²
1.2
1.2
1.2
156
156
156
200
200
200
Dimensions
Price
mm
EURO
250 x 250
62.00
500 x 500 104.00
1.000 x 1.000 176.00
Air (l/min./10 cm2 at 10 cmWC)
Application area
•Filtration of electroplating solutions
•Filtration in chemical process engineering
THOMAPOR®-Filter Mat made of Polyester
Technical specification
Application area
•Heating systems, air-condition, ventilation
•Material: PE (polyethylene)
•Colour: black
•Design: charcoal-loaded fleece
•Pore size: 30 - 46 µm
•Charcoal component: 50 %, corresponds to 225 g/m2
Product specification
•Synthetic and break proof fibre
•Progressively composed
•Thermically bonded
​
Item
​
332343
332344
332345
1
Thickness Max. flow Weight
rate gases1
mm
l/min.
g/m²
1.3
1.3
1.3
7
7
7
450
450
450
Dimensions
Price
mm
EURO
495 x 500
72.00
500 x 990 120.00
990 x 1.000 200.00
Technical specification
•Material: PEs (polyester)
•Colour: white
•Design: synthetic fibre mats (PEs)
•Temperature range: -15 to +100 °C
•Burning behavior: self-extinguishing F1 according to DIN 53438
​
Air (l/min./10 cm2 at 10 cmWC)
THOMAPOR®-High-Tech Charcoal Fleece
made of PE - medium-pored
Application area
•Medical gassing systems, filter and face masks, combat filter systems, clean-room filter systems
Technical specification
•Material: PE (polyethylene)
•Colour: grey
•Design: charcoal-loaded fleece
•Pore size: 89 - 109 µm
•Charcoal component: 30 %, corresponds to 60 g/m2
​
92 THOMAPLAST® I - 2015
301150, 301139
301150, 301139
Separation Technology - Frits, Eluent Filters and Immersion Filters
Item
​
301150
301151
301152
301153
301154
301155
301156
301157
301158
301159
301160
301161
Thickness
mm
Filter class
​
Width
mm
Unit
m
Price
EURO
10
10
10
20
20
20
25
25
25
16
16
16
G2
G2
G2
G3
G3
G3
G4
G4
G4
F5
F5
F5
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1
3
5
1
3
5
1
3
5
1
3
5
90.00
202.00
246.00
108.00
254.00
307.00
192.00
430.00
476.00
190.00
374.00
417.00
Item
​
83412
83413
Filtration
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
6.4
6.4
0.5
2
3
3
45.00
48.00
THOMAPOR®-Filter Mat made of Glass Fibre
THOMACHROM®-Column Frit made of Titanium
Application area
Product specification
•Suitable for all kinds of air condition and ventilation systems
Product specification
•Material: borosilicate fibre
•Colour: Room air side: white; air streaming side: yellow
•Temperature range: -15 to +45 °C
​
Item
​
301139
301140
301141
301142
301143
301144
301145
301146
301147
301148
301149
Thickness
mm
Filter class
​
Width
mm
Unit
m
Price
EURO
25
25
25
25
25
50
50
50
50
50
50
G3
G3
G3
G3
G3
G3
G3
G3
G3
G3
G3
500
500
1,500
1,500
1,500
500
500
500
1,500
1,500
1,500
5
10
1
5
10
1
5
10
1
5
10
105.00
167.00
105.00
261.00
412.00
64.00
136.00
223.00
151.00
381.00
601.00
Frits, Eluent Filters and Immersion Filters
THOMACHROM®-Frits
•Homogeneous 1/4“ frits made of sintered purest titanium, the absolutely
corrosion-proof and biocompatible metallic material of highest mechanical and chemical stability. Suitable for all organic eluents, buffer and salt
solutions, also strongly chlorine-containing ones, as well as strongly acid
and basic eluents. For chromatography of sensitive high-molecular and
bioactive substances in metal-free apparatuses and for ion chromatography. Pore sizes 0.5 and 2 µm resp., thickness 1 mm.
​
Item
​
83414
83415
Outside Ø
mm
Pore size
µm
Unit
piece
Price
EURO
6.4
6.4
0.5
2
3
3
45.00
51.00
THOMACHROM®-Column Frit made of Titanium
framed with PCTFE Ring
Product specification
•Composite frits made of sintered purest titanium, framed with a sturdy
ring made of PCTFE (polychlorotrifluoroethylene) for seal. The material
combination titanium-K is chemically inert and absolutely biocompatible. Improved chromatography behaviour by more favourable
matching of frit lumen and effective diameter of the frit body, lower
dead volume and removal of resolution-decreasing diffusion and cavitation phenomena in the edge zone of the frit. Particularly suited for
chromatography of sensitive, bioactive substances such as enzymes,
peptides etc. in metal-free equipment. Also usable as filter cartridges
for inlet valves in HPLC pumps such as Altex/Beckmann etc.
​
General product specification
•Frits made of plastic, titanium, Hastelloy and proven material composites, high-pressure resistant, for 1/4“ HPLC columns and other HPLC
system elements, for prefiltration of eluents, particularly for use in the
metal-free chromatography.
​
THOMACHROM®-Column Frit made of Hastelloy
Product specification
•Homogeneous 1/4“ frits made of sintered chromium-nickel-molybdenum-tungsten-steel (Hastelloy C 276), the corrosion-proof material for
chemical plant building. For chromatography of sensitive, particularly
bioactive substances and for ion chromatography. Pore size 0.5 and 2 µm resp., thickness 1 mm.
​
THOMAPLAST® I - 2015 93
Separation Technology - Frits, Eluent Filters and Immersion Filters
Item
​
83416
83417
83418
Ø frit,
effective
mm
Ø frit
mm
Pore
size
µm
Thickness
mm
4​ .6
​3.9
​3.2
Unit
Price
piece
EURO
6.35
6.35
6.35
2
2
2
1.6
1.6
1.6
2
2
2
34.00
36.00
39.00
THOMACHROM®-Cylinder Frit made of Hastelloy
Application area
•Immersion frit body for connection to the eluent suction line for direct
fine filtration of HPLC eluents during suction into the pumping system
to protect seals, pistons and column packings from early wear due to
contamination. Preferably for use in ion chromatography, for strongly
acid, basic and other corrosive eluents.
Filtration
THOMACHROM®-Cylinder Frit made of Stainless
Steel - Standard
Application area
•Immersion frit body for direct fine filtration of HPLC eluents during
suction into the pumping system to protect seals, pistons and column
packings from early wear due to contamination.
Product specification
•Cylindrical immersion frit body for direct fine filtration of HPLC eluents
during suction into the pumping system, different pore sizes, with
tubing connecting nozzle for mounting at the eluent suction tubing
(internal diameter 1/8“ or 1/16“), made of proven stainless steel
1.4401 (SS 316), for use in the analytical and preparative HPLC with
flow rates up to 100 ml/min.
​
Product specification
•Cylindrical hollow frit body made of highly corrosion-proof sintered
Hastelloy C 275, the chromium-nickel-molybdenum-tungsten material
for chemical plant building. Nozzle made of the same material, with
PTFE fitted in the frit body. Nozzle outside diameter 1/8“.
​
83345, 83346
Item
​
83345
Item
O-Ø
Pore
size
​
mm
µm
83339
83340
83342
83344
46653
46654
83341
83343
46655
46656
17.2
12.7
9.5
12.7
22.2
9.5
12.7
12.7
17.2
22.2
2
2
2
2
2
10
10
10
10
25
83345, 83346
Outside Ø
mm
Pore size
µm
Length
mm
Unit
piece
Price
EURO
12.7
2
25.4
1
100.00
THOMACHROM®-Cylinder Frit made of Titanium
Application area
•Immersion frit body for connection to the eluent suction line for
direct fine filtration of HPLC eluents during suction into the pumping
system to protect seals, pistons and column packings from early
wear due to contamination. Preferably for use in chromatography of
instable macromolecules and bioactive substances as well as for ion
chromatography.
Product specification
•Cylindrical hollow frit body made of sintered 99.9 % purest titanium, a
metallic material combining chemical resistance and biocompatibility.
Nozzle also made of purest titanium, with PTFE seal fitted in the frit
body. Nozzle outside diameter 1/8“.
​
Item
​
83346
Outside Ø
mm
Pore size
µm
Length
mm
Unit
piece
Price
EURO
12.7
2
25.4
1
123.00
1
95
35
35
35
50
100
100
50
100
100
20.5
25.4
25.4
25.4
38
25.4
25.4
25.4
25.4
38
​
​
​
1/8“
​
1/8“
​
​
1/8“
​
3.2
3.2
1.6
​
3.2
​
3.2
1.6
​
3.2
85.00
85.00
85.00
110.00
110.00
85.00
85.00
85.00
85.00
110.00
Water (+20 °C)
THOMACHROM®-Cylinder Frit
made of Stainless Steel - Universal
Application area
•Cylinder frits for prefiltration of eluents and for helium gassing of
solutions and solvents in the analytical and preparative HPLC.
Product specification
•Cylindrical hollow frit bodies made of high-alloy, corrosion-proof
sinter high-quality steel 1.4571, pore size 5 µm, long tubing nozzle
for mounting of the eluent suction tubing of HPLC pumps, nozzle
outside diameter 1/16“ and 1/8“ resp. Special „narrow-neck bottle“
design with frit body diameter of only 5.8 mm for drawing of eluents
out of flasks and other narrow-lumen vessels, e.g. in experiments
with premixed eluents for process development and in demonstration
experiments.
​
94 THOMAPLAST® I - 2015
Max. Length For
For
Price
flow rate
pipes tubing
liquids1
O-Ø
I- Ø
ml/min. mm
inch
mm EURO
Separation Technology - Frits, Eluent Filters and Immersion Filters
Filtration
THOMAPOR®-Cylinder Frit made of PTFE
Application area
•Suction filter for protection of pump systems, to protect seals, pistons
and column packings from early wear due to contamination.
Product specification
Item
​
Outside Ø
mm
Length
mm
Ø nozzle
mm
Unit
piece
Price
EURO
5.8
15
15
27
22
20
20
30
1.6
1.6
3.2
3.2
1
1
1
1
108.00
121.00
133.00
151.00
84026
84027
84028
84029
•Large surface, therefore long holding time
•For use with all media due to material
•Dirt-repellent/non-adhesive
•Water-repellent/hydrophobic
•Antiadhesive (non-wettable)
•Delivered without hose and mapped ferrule
Technical specification
•Material: PTFE (polytetrafluoroethylene)
•Temperature range: -200 to +250 °C
•Sterilization: autoclavable (+121 °C)
•Filter length: 25 mm
•Connecting thread: UNF 1/4”-28 Gg
​
THOMAPOR®-Cylinder Frit made of PE
Application area
•Metal-free immersion filter for fine filtration of HPLC eluents during
suction in the high-pressure pump, for protection of the sensitive
suction pressure systems from early wear by suspended matter in
the eluent. Preferably for metal-free chromatography of sensitive and
bioactive materials, for enzyme and peptide separation and for ion
chromatography and environmental analytics.
Product specification
•Cylinder frit with large active surface made of sintered polyethylene,
chemical-resistant and suitable for aqueous solutions. Free of extractables, physiologically safe and biocompatible. Pore size <20 µm, high
retention capacity at low flow resistance. Screwing-in connector made
of inert polyether etherketone (PEEK) for 1/16“ or 1/8“ suction lines.
Complete for easy mounting without tools.
Item
​
302821
302822
302823
302824
​
Outside
Ø
mm
Pore
size
µm
For pipes
outside Ø
inch
Unit
Price
piece
EURO
14
14
14
14
2
2
10
10
1/16“
1/8“
1/16“
1/8“
1
1
1
1
128.00
128.00
105.00
105.00
THOMAPOR®-Immersion Filter made of HDPE
​
Product specification
•Made of high-pressure polyethylene. Direct application or with precoat
layer for fine filtration. Large filter with barbed tubing connection.
Item
O-Ø
Pore
size
​
Max.
For
flow rate pipes
liquids1 O-Ø
ml/min. inch
mm
µm
83500 12.7
83501 12.7
20
20
500
500
83502 12.7
20
500
1
Water (+20 °C)
Design
Unit Price
​
piece EURO
1/16“ frit, complete
1/8“ frit, complete
replacement
​
frit
1
1
70.00
70.00
3
23.00
Item
​
50478
50479
Pore
size
For
tubing
inside Ø
mm
Ø
filter
Length
Unit
mm
mm
piece
EURO
90 - 130 8.4 - 9
90 - 130 11.5 - 16
40
125
90
150
1
1
70.00
106.00
µm
Price
THOMAPLAST® I - 2015 95
Separation Technology - Frits, Eluent Filters and Immersion Filters
THOMACHROM®-Fritted Filter made of Stainless Steel
Prefilters and Filter Holders
Product specification
•Filter units for eluent polishing filtration in the high-pressure part of
HPLC systems and for use as safety filters placed after the sample
inlet valve to protect the column packing from contaminations out of
eluent or sample.
•In-line filter system made of stainless steel with screwed 2 µm stainless steel frits, interchangeable without problems, low dead volume,
high cut off. Frit diameters match optimally the connecting capillaries
and through bores.
​
Filtration
THOMAPOR®-Disposable Filter Unit − hydrophilic,
with integrated glass fibre prefilter
Application area
•Prefiltration and clarification of aqueous samples and solutions with a
high content of suspended matter, especially for insertion in systems
of precision analytics.
Product specification
•Disposable ready-to-use filter unit made of inert polypropylene,
integrated glass-fibre prefilter, filter made of polyamide, on both
sides tubing nozzle connection 6 to 10 mm and luer internal cone;
temperature-resistant up to +80 °C, chemically sterilizable.
​
Item
​
For pipes For pipes
outside outside
Ø (A)
Ø (B)
inch
inch
83671
97640
83672
97641
836731
1
1/16“
1/16“
1/8“
1/8“
1/4“
1/32“
1/16“
1/16“
1/8“
1/4“
Ø
frit
Nominal
width
Unit
Price
mm
mm
piece
EURO
1.6
1.6
3.2
3.2
6.4
0.25
0.5
0.75
2
4.6
1
1
1
1
1
75.00
45.00
45.00
45.00
45.00
Item
​
Pore
size
µm
Ø
filter
mm
For tubing
inside Ø
mm
Price
piece
EURO
58583
0.45
50
6 - 10
6
72.00
Frit is fixed, not interchangeable
MULTIFIT®-High-Pressure Capillary Mixing Chamber
for Media made of PEEK
Product specification
THOMAPOR®-Disposable Mini Filter Unit −
hydrophilic, with female luer-lock
Application area
•Clarification and fine filtration of aqueous samples and solutions in
smallest volumes for precision analytics such as HPLC and capillary
electrophoresis in areas of clinical chemistry, laboratory diagnostics,
biochemistry, environmental chemistry, pharmacology and food
processing chemistry.
•Complete with fingertight fittings
​
Technical specification
•Dead volume: <4 µl
•Counterpressure: <1 bar at 1 ml/min.
•Pressure stability: 350 bar
•Filter porosity: 10 µm
Product specification
•Disposable, ready-to-use filter units with minimum dead volumes for
syringes made of inert polyamide (Nylon), and integrated membrane
filters made of the same material, temperature-resistant up to +80 °C,
chemically sterilizable.
​
Item
​
14734
1
Unit
For pipes
outside Ø
inch
Max. op.
pressure1
bar
Internal
thread
​
EURO
1/16“
350
UNF 10-32
220.00
at +20 °C
96 THOMAPLAST® I - 2015
Price
Separation Technology - Prefilters and Filter Holders
Item
Filtration
Ø
filter
mm
Dead
volume
ml
Outlet
Unit
​
Pore
size
µm
​
piece
EURO
58574
58575
58576
0.2
0.45
5
3
3
3
0.007
0.007
0.007
male luer
male luer
male luer
10
10
10
30.00
30.00
30.00
1
Price
at +20 °C
THOMAPOR®-Disposable Filter Unit made of Cellulose Derivatives - hydrophilic, with female luer-lock
Application area
•Clarification and prefiltration of aqueous samples and solutions in
small volumes for precision analytics and synthetic chemistry.
Item
Ø
filter
mm
Dead
volume
ml
Outlet
Unit
​
Pore
size
µm
​
piece
EURO
58568
58569
58570
58571
58572
58573
0.2
0.2
0.2
0.45
0.45
0.45
13
13
30
13
13
30
0.01
0.01
0.05
0.01
0.01
0.05
mini-tip
male luer
male luer
mini-tip
male luer
male luer
10
10
10
10
10
10
30.00
30.00
30.00
30.00
30.00
30.00
Product specification
•Disposable, ready-to-use colour-coded filter units with minimum dead
volumes for syringes and linear pumps with female luer-lock connection, made of inert polycarbonate (PC), and integrated membrane
filters made of cellulose derivatives, filter area 5.7 cm2, temperatureresistant up to +80 °C, chemically sterilizable.
​
1
Price
at +20 °C
THOMAPOR®-Disposable Filter Unit - hydrophobic,
with female luer-lock
Application area
•Filtration of small volumes of organic samples and solutions as well as
of gases for precision analytics and preparative chemistry.
Product specification
Item
​
filter1 Pore Ø
Dead Outlet Colour Unit Price
size filter volume
​
µm mm
ml
​
​
piece EURO
58577 CA
58579 CA
58580 CA
58581 CA
58582 CN
1
0.2
0.45
0.8
1.2
5
30
30
30
30
30
0.05
0.05
0.05
0.05
0.05
male luer
male luer
male luer
male luer
male luer
red
white
green
orange
black
10
10
10
10
10
•Disposable, ready-to-use filter units with minimum dead volumes
for syringes and linear pumps with female luer-lock connection,
colour-coded, made of inert polypropylene (PP), and integrated PTFE
membrane filters, chemically sterilizable.
​
30.00
30.00
30.00
30.00
30.00
CA = cellulose acetat, CN = celllulose nitrate
THOMAPOR®-Disposable Filter Unit made of RC hydrophilic, with female luer-lock
Application area
•Clarification and fine filtration of aqueous samples and solutions in
small volumes used in precision analytics and in research areas of
clinical chemistry, laboratory diagnostics, biochemistry, environmental
chemistry, pharmacology and food processing chemistry.
Product specification
•Disposable, ready-to-use filter units with minimum dead volumes for
syringes and linear pumps with female luer-lock, made of inert polypropylene (PP), and integrated membrane filters made of regenerated
cellulose (RC), outlet male luer or pointed cone (mini-tip) for filtration in
narrow-neck vessels; temperature-resistant up to +80 °C, chemically
sterilizable.
Item
​
Pore
size
µm
58585 0.2
58586 0.45
58587
1
58588
5
1
Ø
filter
mm
Dead
volume
ml
30
30
30
30
0.05
0.05
0.05
0.05
Outlet
Colour
​
​
male luer white
male luer green
male luer yellow
male luer grey
Unit
Price
piece EURO
10
10
10
10
51.00
51.00
51.00
51.00
at +20 °C
​
THOMAPLAST® I - 2015 97
Separation Technology - Prefilters and Filter Holders
Filtration
THOMAPOR®-Glass Fibre Filter
Technical specification
Product specification
•Glass fibre filter pipe permanently welded in a sealed plastic filter holder
•Use for liquid or gas filtration such as sterilization of compressed air
and other gases.
•Retention capacity: Air or gas filtration: 99.99 % (0.6 µm particles);
liquid filtration: 98 % (0.3 µm particles)
•Choice of porosity:
For air and gas filtration: 25 or 8 µm
Sterilization of air gas mixture: 0.3 or 0.9 µm
Complete removal of oil and water: 2.0 µm
•Material: PTFE (polytetrafluoroethylene)
•Temperature range: -200 to +250 °C
•Sterilization: autoclavable (+121 °C)
•Max. operating pressure: 20 bar
•Connections: Luer-Lock adapter (on both sides)
Item
​
302867
302868
Ø
filter
mm
Filter
area
cm²
Outside Ø
housing
mm
Unit
Price
piece
EURO
13
25
0.78
3.8
21
34
1
1
152.00
218.00
Technical specification
•Material:
Filter holder: clear nylon
Filter pipe: borosilicate glass with epoxy resin binder
•Max. operating pressure: 8.62 bar (at +43.3 °C)
•Max. temperature: +110 °C (at 0 bar)
THOMAPOR®-In-Line Filter made of PTFE
Application area
•Pressure prefilter for direct fine filtration before HPLC columns.
Product specification
​
•No dead volume
•Long operating time due to large filtering surface
•Due to material usable with all media
•For filter membrane Ø 13 mm and a thickness of 0.1 to 3 mm
•The membrane is interchangeable without using tools.
​
Technical specification
Item
​
µm
Retention
capacity1
%
50402
50403
50404
50405
8
2
0.9
0.3
99.5
99.99
100
100
1
Pore size
For tubing
inside Ø
mm
Unit
Price
piece
EURO
6.4
6.4
6.4
6.4
5
5
5
5
195.00
195.00
195.00
195.00
•Material: PTFE (polytetrafluoroethylene)
•Temperature range: -200 to +250 °C
•Sterilization: autoclavable (+121 °C)
•Max. operating pressure: 20 bar
•Filter area: 132 mm2
•Connecting thread: UNF 1/4”-28 Gg
retention capacity at 0.6 µm particles
THOMAPOR®-Prefilter made of PTFE with Luer-Lock
for Syringes
Product specification
•The prefilter is to be easily extended to a multistep filter system (prefilter, main filter) by alignment of further filter units due to the Luer-Lock
connection of the filters.
•Filter membrane easily exchangeable
•Very low dead volume
•Easy cleaning due to extremely smooth, antiadhesive surface
•Metal-free
​
98 THOMAPLAST® I - 2015
Item
​
302825
302826
Ø
filter
mm
For pipes
outside Ø
inch
Length
Unit
mm
piece
EURO
13
13
1/16“
1/8“
44
44
1
1
150.00
150.00
THOMAPOR®-High-Chem Membrane Filter
made of PTFE
Price
Separation Technology - Prefilters and Filter Holders
Filtration
Technical specification
Item
•Material: PTFE (polytetrafluoroethylene), microporous
•Temperature range: -200 to +250 °C
•Sterilization: autoclavable (+121 °C)
•Filter area: 132 mm2
​
312904
312905
312910
312911
312912
312913
​
Item
​
302827
302828
302829
302830
302831
Ø filter
mm
Pore size
µm
Thickness
mm
Unit
piece
Price
EURO
13
13
13
13
13
0.05
0.2
0.45
5
10
0.2
0.2
0.2
0.2
1
5
5
5
5
10
155.00
155.00
155.00
155.00
144.00
Pore size Material Material
housing
filter
µm
​
​
50
100
5
25
50
100
PVDF
PVDF
PFA
PFA
PFA
PFA
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
NW
Unit
Price
mm
piece
EURO
4/6
4/6
4/6
4/6
4/6
4/6
1
1
1
1
1
1
48.00
48.00
80.00
80.00
80.00
80.00
RCT®-Accessories: Replacement Filter Plates
made of PTFE
​
THOMAPOR -In-Line Filter Module
made of PP/PVDF/PFA
®
Application area
•Gas processing in analytical engineering
•Removal of solid matters from suspensions and aerosols in analytical
chemistry
Product specification
•Low weight, small and compact filter module for the uncomplicated
mounting in processing plants with tubing and piping
•Design ”Standard”: filter body made of polypropylene (PP) with good
chemical resistance
•Design ”High-Stable”: filter body made of polyvinylidene fluoride
(PVDF) with very good chemical stability, as well as great hardness and
excellent dimensional stability
•Design ”High-Chem”: filter body made of perfluoralkoxy (PFA) with
excellent chemical resistance
Item
Pore size
Ø filter
​
µm
312906
312907
312908
312909
5
25
50
100
Technical specification
•Material filter body: PP (polypropylene), PVDF (polyvinylidene fluoride)
oder PFA (perfluoralkoxy)
•Material cartridge: PTFE (polytetraflurooethylene)
•Flow value Kv: 0.12 m3/h = 120 l/h (water +5 to +30 °C, p = 1 bar)
•Pressure stage: PN 6
•Connection: for tubings inner diameter 4 mm, outer diameter 6 mm
(DN 4/6)
​
Material
Unit
Price
mm
Thickness
mm
​
piece
EURO
11.2
11.2
11.2
11.2
1
1
1
1
PTFE
PTFE
PTFE
PTFE
1
1
1
1
8.00
8.00
8.00
8.00
THOMAPOR®-Filter Holder made of PC
Application area
•For ultrapurification and sterile filtration of small volumes
Product specification
•Particularly economic in price
Technical specification
•Max. operating pressure: 3.5 bar
•Max. temperature: +140 °C
•Type:
420100: inlet male luer, outlet female luer-lock
420200: inlet female luer-lock, outlet male luer
420400: inlet female luer-lock, outlet NPT 1/4“-external thread, 1/4“ ID tubing olive
​
Item
​
312894
312895
312896
312897
312902
312903
Pore size Material Material
housing
filter
µm
​
​
5
25
50
100
5
25
PP
PP
PP
PP
PVDF
PVDF
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
NW
Unit
Price
mm
piece
EURO
4/6
4/6
4/6
4/6
4/6
4/6
2
2
2
2
1
1
46.00
46.00
46.00
46.00
48.00
48.00
420100, 420200, 420400
420400
THOMAPLAST® I - 2015 99
Separation Technology - Prefilters and Filter Holders
Item
​
420100
420200
420400
Ø
filter
mm
Filter
area
cm²
External
thread
​
13
25
47
0.8
2.4
11.3
​
​
NPT 1/4“
Filtration
For tubing Price
inside Ø
mm
EURO
​
​
6.4
19.00
31.00
87.00
THOMAPOR®-Filter Holder made of POM with luers
Application area
•Ideally suited for separation of particles out of fluids, volumes amounting to 10 ml
•For filtration of biological media (eye drops, samples for HPLC, GC, also
suited for filtration of lubricants)
•As end filter for gas filtration
Technical specification
•Material:
Housing: POM (acetal resin)
Support sieve: stainless steel 1.4401 (SS 316)
Tubing olive: nylon (polyamide)
O-ring: FPM
•Filter diameter: 25 mm
•Prefilter diameter: 20 mm
•Effective filtering surface: 3.7 cm2 (22 mm diameter)
•Overall length: 20 mm
•Filter holder diameter: 35 mm
•Connection: In- and outlet adapter with NPT 1/8“ on
6.4 mm ID tubing olive
•Max. temperature: in air +85 °C, for a short time up to +121 °C,
in water +65 °C
•Max. operating pressure: in air/gas 1.4 bar; in water 2.8 bar
•Sterilization: autoclavable (+121 °C)
​
Product specification
•Fits all standard syringes with luer connection
•Usable also with 20 mm prefilter allowing higher throughput by it
Technical specification
•Connection:
Inlet: female luer-lock
Outlet: male luer
•Max. operating pressure: 2.8 bar
•Sterilization: autoclavable (+121 °C)
•Prefilter diameter: 20 mm (only item 15550)
Item
​
15549
15550
Material
housing
​
Material
inserts
​
Material
gasket
​
Max. temp.
POM
POM
POM
stainless steel
PTFE
FPM
121
65
°C
Item
​
15551
Ø
filter
mm
For tubing
inside Ø
mm
Internal
thread
​
Unit
Price
piece
EURO
25
6.4
NPT 1/8“
2
144.00
THOMAPOR®-Filter Holder made of POM - Open
Application area
•For microbiological monitoring and for particle analysis
•Aerosol filter holder serve for sampling in clean rooms
•For collection of breath air samples
Item
​
15549
15550
Ø
filter
mm
Filter
area
cm²
13
25
0.8
3.7
Dimensions Unit
ØxH
mm
piece
16 x 35
35 x 27
1
1
Price
EURO
69.00
87.00
THOMAPOR®-Filter Holder made of POM - In-Line
Application area
•For in-line purification of air and gases and for fluid filtration
Product specification
•For direct integration in the line system
•Conical inlet gives rise to even sample distribution on the surface
•Also usable with 20 mm prefilter allowing higher throughput by it
100 THOMAPLAST® I - 2015
Technical specification
•Material:
Housing: POM (acetal resin)
Support sieve: stainless steel 1.4401 (SS 316)
Tubing olive: nylon (polyamide)
O-ring: FPM
•Filter diameter: 25 mm
•Effective filtering surface: 3.7 cm2
•Overall length: 20 mm
•Filter holder diameter: 35 mm
•Weight: 20 g
Separation Technology - Prefilters and Filter Holders
Filtration
•Connection: Inlet: open, Outlet: adapter with NPT 1/8“ on
6.4 mm ID tubing olive
•Max. temperature: +121 °C
​
Item
​
Ø filter
mm
Unit
piece
Price
EURO
25
2
144.00
15552
THOMAPOR®-Filter Holder made of PP - In-Line
Application area
Item
​
•For in-line purification of air and gases and for fluid filtration
Technical specification
15555
•Material:
Housing and support sieve: PP (polypropylene)
O-ring: silicone
•Max. temperature: +128 °C (+80 °C for fluids)
•Max. operating pressure: 5 bar
•Sterilization: autoclavable (+121 °C)
•Type:
15553: inlet female luer-lock, outlet male luer
15554: inlet female luer-lock, outlet NPT 1/4“-external thread, 1/4“ ID tubing olive
Ø filter
mm
Outlet
​
Unit
piece
Price
EURO
47
female luer-lock
1
180.00
THOMAPOR®-Filter Holder made of PSU
Application area
•For clarification, purification or sterile filtration of smallest fluid quantities with a syringe, allowing filtration in both directions.
Technical specification
•Material: PSU (polysulfone)
•Filter support: flexible sieve perforation in the bottom part
•Seal: silicone O-ring
•Max. operating pressure: 7 bar
•Max. temperature: +180 °C
•Sterilization: autoclavable (+134 °C and 2 bar)
•For adaption to: 70775 - 70778
​
​
Item
​
15553
15554
Ø
filter
mm
Ø
prefilter
mm
Filter
area
cm²
25
47
21
42.5
3.5
13.5
Dimesions Unit
ØxH
mm
piece
32 x 32
67 x 70
1
1
Price
EURO
50.00
120.00
​70757
THOMAPOR®-Filter Holder made of PP - Open
Item
Application area
​
Technical specification
70757
70758
•Ideal for air sampling
•Material:
Housing: polypropylene
Support sieve: polypropylene
O-rings: PTFE
•Filter diameter: 47 mm
•Prefilter diameter: no data
•Effective filtering surface: 13.5 cm2
•Overall length: 51 mm
•Filter holder diameter: 63 mm
•Weight: 100 g
•Connection:
Inlet: open
Outlet: female luer-lock on 6.4 mm ID tubing olive
•Max. temperature: +128 °C (+80 °C for fluids)
•Vacuum: 1 bar
•Sterilization: autoclavable (+121 °C)
70758
Ø
filter
mm
25
50
Inlet
​
Outlet For tubing Unit Price
inside Ø
​
mm
piece EURO
female luer-lock male luer
female luer-lock
​
​
12
5
1
92.00
67.00
THOMAPOR®-Filter Holder made of PFA
​
​
THOMAPLAST® I - 2015 101
Separation Technology - Prefilters and Filter Holders
Filtration
Item
Type
Ø filter
​
​
mm
72508
72509
72510
72511
72512
72513
72514
72515
72535
72536
72516
72517
72518
72519
72520
72521
72522
72523
72524
72525
72526
72527
72528
72529
72530
72531
72532
72533
72534
2
9
3
10
4
11
5
12
6
7
1
2
3
4
5
6
7
1
8
2
9
3
10
4
11
5
12
6
7
50
50
50
50
50
50
50
50
50
50
47
47
47
47
47
47
47
50
50
50
50
50
50
50
50
50
50
50
50
Application area
•Filter unit for individual problem solutions and for fixed mounting in
complete systems.
Product specification
•Resistant to strongest organic and inorganic compounds.
•The highest permissive loadable temperature is +288 °C with approx.
2000 operating hours; with more than 2000 operating hours the
loadable temperature is decreased to +260 °C.
•PFA is non-toxic and is safely to be used in the food processing
industry. It is as unsuited as glass for propagation and growth of
microorganisms.
•Available as four basic types with diameters 47; 50; 147 and 150
mm with different connecting combinations each. The respective size
(diameter) is colour-coded. In filter holders with membrane diameters
of 147 and 150 mm resp. the coloured outer edge of the top is 25 %
glass fibre reinforced providing higher material stability.
•Specification of connecting combinations:
1 inlet/outlet tubing connection 3/8“ outer diameter (OD)
2 inlet with tubing connection 3/8“ OD; outlet with clamp fitting for
tubing 1/4“ OD
3 inlet with tubing connection 3/8“ OD, outlet with clamp fitting for
tubing 3/8“ OD
4 inlet with clamp fitting for tubing 1/4“ OD; outlet with tubing
connection 3/8“ OD
5 inlet with clamp fitting for tubing 3/8“ OD; outlet with tubing
connection 3/8“ OD
6 inlet with clamp fitting for tubing 1/4“ OD; outlet with clamp fitting
for tubing 1/4“ OD
7 inlet with clamp fitting for tubing 3/8“ OD; outlet with clamp fitting
for tubing 3/8“ OD
8 inlet/outlet tubing connection 1/2“ OD
9 inlet with tubing connection 1/2“ OD; outlet with clamp fitting for
tubing 1/4“ OD
10 inlet with tubing connection 1/2“ OD; outlet with clamp fitting for
tubing 3/8“ OD
11 inlet with clamp fitting for tubing 1/4“ OD; outlet with tubing
connection 1/2“ OD
12 inlet with clamp fitting for tubing 3/8“ OD; outlet with tubing
connection 1/2“ OD
Item
Type
Ø filter
​
​
mm
72499
72500
72501
72502
72503
72504
72505
72506
72507
1
2
3
4
5
6
7
1
8
47
47
47
47
47
47
47
50
50
Max. op. Colour
pressure1
bar
​
102 THOMAPLAST® I - 2015
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
orange
orange
orange
orange
orange
orange
orange
green
green
Unit
Price
piece
EURO
1
1
1
1
1
1
1
1
1
169.00
179.00
179.00
179.00
185.00
190.00
195.00
179.00
179.00
1
Max. op. Colour
pressure1
bar
​
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
Unit
Price
piece
EURO
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
179.00
179.00
179.00
185.00
185.00
185.00
190.00
195.00
195.00
200.00
174.00
179.00
185.00
179.00
179.00
190.00
195.00
179.00
179.00
185.00
190.00
190.00
195.00
185.00
185.00
185.00
195.00
200.00
205.00
green
green
green
green
green
green
green
green
green
green
black
black
black
black
black
black
black
brown
brown
brown
brown
brown
brown
brown
brown
brown
brown
brown
brown
at +20 °C
THOMAPOR®-Filter Holder made of Aluminium In-line
Application area
•For in-line fluid filtration and for air and gas purification.
Technical specification
•Material:
Housing: anodically oxidized aluminium
Support sieve: high-quality steel 1.4401 (SS 316), electropolished
Seal: PTFE
O-ring: FPM
Tubing olive adapter: polyethylene
•Filter diameter: 47 mm
•Prefilter diameter: 37 mm
•Effective filtering surface: 9.6 cm2
•Overall length: 57 mm
•Filter holder diameter: 59 mm
•Connection: In- and outlet adapter with NPT 1/8“ on
6.4 mm ID tubing olive
•Max. temperature: limited to +121 °C by adapter
•Max. operating pressure: 13.8 bar
•Sterilization: autoclavable (+121 °C)
​
Separation Technology - Prefilters and Filter Holders
Filtration
Product specification
Item
​
Ø filter
mm
For tubing inside Ø
mm
Unit
piece
47
6.4
1
15559
Price
EURO
•The insert is put into a commonly used centrifuge tube and filled with
the sample. After the centrifugal action the filtrate is in the tube and
the residue on the filter membrane.
•PET capillary pore membrane with defined pore sizes and minimum
dead volume
•Defined retention volumes in the membrane filter, thus no drying out
of the sample
•High safety during operation (no leakage due to welding of the membrane)
•High chemical resistance
•Supplied non-sterile, not autoclavable but sterilizable chemically
•Regulations: USP Class VI, EN ISO 9001
​
1,368.00
THOMAPOR®-Filter Holder made of Stainless Steel
Application area
•For clarification, purification or sterile filtration of smaller fluid volumes
with a pressure control syringe allowing filtration in both directions.
•For adaption to THOMAPOR®-pressure control syringes 70770 to 70773.
Technical specification
•Material: stainless steel 1.4305
•Design: with sieve plate, electropolished, material no. 1.4401
•Connection: inlet: female luer-lock, outlet: male luer
•Max. operating pressure: 7 bar
•Max. temperature: +200 °C
•Sterilization: autoclavable (+121 °C); hot air (+160 °C)
Item
​
58865
58866
58871
58872
58878
​
1
Pore size
µm
Max. volume
ml
Tube size1
ml
Unit
piece
Price
EURO
0.2
0.45
0.2
0.45
0.45
0.5
0.5
5
5
20
1.5 - 2.2
1.5 - 2.2
15
15
50
25
25
25
25
25
98.00
98.00
168.00
168.00
216.00
matches centrifuge tubes of the size indicated
THOMAPOR®-Centrifugal Filter for Ultrafiltration
Application area
Item
​
70755
Ø
filter
mm
Filter
area
cm²
Max. flow
rate liquids1
ml/min.
Dimensions
ØxH
mm
Price
EURO
25
3
150
30 x 26
376.00
•Protein removal for HPLC analysis
•Bacteria and cell harvesting
•Concentration of oligos and nucleic acids
•Concentration of cell lysates and tissue homogenates
•Protein isolation out of cell-containing fluids (only membranes with
pore size 0.2 µm)
•Particle isolation out of solvents
•Antibody and virus concentration
•Protein, DNA and RNA isolation out of geles
​
1
Medium: water, membrane: 0.45 µm
Filter Modules
THOMAPOR®-Centrifugal Filter for Microfiltration
Application area
•Protein removal for HPLC analysis
•Bacteria and cell harvesting
•Concentration of oligos and nucleic acids
•Concentration of cell lysates and tissue homogenates
•Protein isolation out of cell-containing fluids (only membranes with
pore size 0.2 µm)
•Particle isolation out of solvents
•Antibody and virus concentration
•Protein, DNA and RNA isolation out of geles
Product specification
•Two-part system consisting of centrifuge tube (PP) and matching
Omega® membrane (modified PET)
•High safety during operation
THOMAPLAST® I - 2015 103
Separation Technology - Filter Modules
Filtration
Technical specification
•Available in three sizes:
nano: Filtration volume of 50 to 500 µl
micro: Filtration volume up to 3.5 ml
macro: Filtration volume up to 15 ml
•Supplied non-sterile, but sterilizable chemically
•Material:
Housing: PP (polypropylene)
Membrane: PP (polypropylene)
•Filter area: 0.8 or 3.9 cm2
•Retention volume: <8 µl with filter area 0.8 cm2; <30 µl with filter
area 3.9 cm2
•Max. operating pressure: 5 bar
•Max. temperature: +50 °C
Technical specification
•Dimensions: nano: 1.4 x 4.5 cm (OD x L),
micro: 1.7 x 9.3 cm (OD x L), macro: 2.9 x 10.9 cm (OD x L)
•Concentrated volume: nano: 15 µl
micro: 30 - 50 µl (depending on rotor)
macro: 0.5 - 1.5 ml (depending on rotor)
•Retention volume: nano: <5 µl, micro: 5 µl, macro: 0.03 ml
•Max. centrifugal force: nano: 14,000 x g, micro: 7500 x g
macro: 5000 x g
•Max. temperature: +40 °C
Item
​
58867
58868
58869
58870
58873
58874
58875
58876
58879
58880
58881
58882
Type
Colour
Cut off
​
​
kDalton
nano
grey
nano
blue
nano
red
nano transparent
micro
grey
micro
blue
micro
red
micro transparent
macro
grey
macro
blue
macro
red
macro transparent
3
10
30
100
3
10
30
100
3
10
30
100
Effective
Unit
filter area
cm²
piece
0.28
0.28
0.28
0.28
0.46
0.46
0.46
0.46
10
10
10
10
12
12
12
12
12
12
12
12
6
6
6
6
​
Item
​
Price
Pore size
µm
Filter area
cm²
Unit
piece
Price
EURO
1
1
2
2
0.2
0.45
0.2
0.45
0.8
0.8
3.9
3.9
25
25
25
25
125.00
125.00
175.00
175.00
EURO
98.00
98.00
98.00
98.00
168.00
168.00
168.00
168.00
216.00
216.00
216.00
216.00
THOMAPOR®-Microanalytical Syringe Filter
made of PP
Application area
•Clarification of aqueous and non-aqueous solutions in milliliter volumes for sample preparation in the area of analytical chemistry.
Product specification
15022
15023
15024
15025
Type
​
•Metal-free syringe filters, small diameter and integrated outlet tip
for rapid filtration in narrow-neck vessels; hydrophobic metal filters,
compatible with almost all HPLC solvents, pore sizes 0.2 and 0.45 µm
resp.; lowest dead volume, Luer syringe fitting; two sizes for volumes
<5 ml (Type 1) and >5 ml (Type 2).
•THOMAPOR®-Microanalytical syringe filters made of polypropylene are
usable as pressure or suction filter.
Filter Housings and Filter Elements
THOMAPOR®-High-Tech Media Filter Housings and
Filter Candles
Application area
•Laboratory and analytical technology, microelectronics, refrigerating
technology plants, fuel conveyer systems, chemical process engineering, pneumatic and hydraulic systems, doctor‘s and dentist‘s offices,
photographic laboratories
•For filtration, clarification and particle retention in chemical process
solutions, etching baths, mineral oils, refrigerating media, lacquers and
dyes, pneumatic pressure gases and air, hydraulic fluids, industrial
water, photochemical solutions.
General product specification
•Chemical-resistant, mechanically stable, pressure- and temperatureloadable filter systems for fixed mounting in conveying lines for liquid
and gaseous media, consisting of a two-part media-tightly screwable
full-plastic filter housing made of polyamide or polyamide/trogamide
combination. Available in two field-proven sizes for delivery capacities
up to 1,500 l/h, optionally with handy drain screw on the housing bottom. Fine-filter candles made of polyethylene or straining filter candles
made of nylon with graduated pore sizes between 5 and 350 µm are
to be selected according to the intended application.
​
THOMAPOR®-High-Tech Media Filter Housing low flow rate
Product specification
•Filter housing for small flow rates
Technical specification
•Max. operating pressure: 10 bar at +30 °C; 6 bar at +85 °C
•Connections: on both sides 1/4“ NPT internal thread
•Height: 85 mm without drain screw; 105 mm with drain screw
•Weight: 50 g
•Max. temperature: +70 °C with PP design; +50 °C with trogamide design
•Seal: Buna-N
•Colour: blue (polypropylene); transparent (trogamide)
​
104 THOMAPLAST® I - 2015
Separation Technology - Filter Housings and Filter Elements
45730
Item
​
45729
45730
45731
1
Filtration
45730
Max.
flow rate
liquids1
l/h
380
380
380
Design
​
Internal Material Material Price
thread top part bottom
part
​
​
​
EURO
without drain NPT 1/4“
without drain NPT 1/4“
with drain NPT 1/4“
PP
PP
PP
PP
42.00
Trogamid 42.00
Trogamid 58.00
referring to water (+20 °C) and Δp = 0.2 bar
Item
​
µm
Max. flow rate
liquids1
l/h
45738
45739
45740
5
10
25
60
100
160
1
Pore size
Unit
Price
piece
EURO
1
1
1
37.00
37.00
37.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech Micropore Filter Candle
made of Glass Fibre
THOMAPOR®-High-Tech Straining Filter Candle
made of Nylon - low flow rate
Product specification
Product specification
•Heavy-duty filter candles made of nylon with PP retaining core, regenerable by backwashing or in the ultrasound bath, for THOMAPOR®-Hightech filter housing, items 45729 to 45731, with defined pore sizes.
•Heavy-duty micropore filter candles made of glass fibre with PP
retaining core for THOMAPOR®-High-tech filter housing, items 45729
to 45731, with defined pore sizes.
​
​
Item
Item
​
µm
Max. flow rate
liquids1
l/h
45732
45733
45734
45735
45736
45737
40
60
80
140
200
350
180
200
230
280
300
380
1
Pore size
Unit
Price
piece
EURO
3
3
3
3
3
3
33.00
33.00
33.00
33.00
33.00
33.00
referring to water (+20 °C) and Δp = 0.2 bar
​
µm
Max. flow rate
liquids1
l/h
45768
45769
45770
0.3
0.9
2
10
22
35
1
Pore size
Unit
Price
piece
EURO
1
1
1
40.00
40.00
40.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech-Media Filter Housing high flow rate
Product specification
•Filter housing for higher flow rates
THOMAPOR®-High-Tech Fine Filter Candle
made of PE - low flow rate
Product specification
•Heavy-duty filter candles made of chemical-resistant polyethylene
with retaining core for THOMAPOR®-High-tech filter housing, items
45729 to 45731.
​
Technical specification
•Max. operating pressure: 10 bar at +30 °C; 6 bar at +50 °C
•Connections: optionally on both sides 3/8“ or 1/2“ NPT internal thread
•Height: 165 mm without drain screw; 175 mm with drain screw
•Weight: 250 g
•Max. temperature: +70 °C with PP; +50 °C with SAN
•Colour: blue (polypropylene); transparent (SAN)
•Seal: Buna-N
​
THOMAPLAST® I - 2015 105
Separation Technology - Filter Housings and Filter Elements
Item
​
45741
45742
45743
45744
1
Max.
flow rate
liquids1
l/h
Design
800
800
800
800
without drain
with drain
without drain
with drain
Internal Material Material Price
thread top part bottom
part
​
​
​
EURO
​
NPT 3/8“
NPT 3/8“
NPT 1/2“
NPT 1/2“
PP
PP
PP
PP
SAN
SAN
SAN
SAN
94.00
102.00
94.00
102.00
referring to water (+20 °C) and Δp = 0.2 bar
Filtration
Item
​
µm
Max. flow rate
liquids1
l/h
45751
45752
45753
5
10
25
140
210
370
1
Pore size
Unit
Price
piece
EURO
1
1
1
31.00
31.00
31.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-Filter Housing made of PP
Technical specification
THOMAPOR®-High-Tech-Straining Filter Candle
made of Nylon - high flow rate
Product specification
•Heavy-duty filter candles made of nylon with PP retaining core, regenerable by backwashing or in the ultrasound bath, for THOMAPOR®-Hightech filter housing, items 45741 to 45744, with defined pore sizes.
•Material: PP (polypropylene)
•Seal: Buna-N
•Colour: blue
•Max. operating pressure: 10 bar at +20 °C
•Max. temperature: +55 °C
​
​
Item
Item
​
µm
Max. flow rate
liquids1
l/h
45745
45746
45747
45748
45749
45750
40
60
80
140
220
350
420
460
520
600
700
800
1
Pore size
Unit
Price
piece
EURO
1
1
1
1
1
1
26.00
26.00
26.00
26.00
26.00
26.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech-Fine Filter Candle made of
PE - high flow rate
Product specification
•Heavy-duty filter candles made of acid-resistant polyethylene with
retaining core for THOMAPOR®-High-tech filter housing, items 45741
to 45744.
​
106 THOMAPLAST® I - 2015
​
mm
Max.
flow rate
liquids1
l/h
94482
94445
52851
52852
125
254
254
508
500
1,000
1,500
3,000
1
Length
Internal
thread
Dimensions
ØxH
​
mm
EURO
NPT 3/8“
NPT 3/8“
NPT 3/4“
NPT 3/4“
114 x 171
114 x 290
130 x 311
130 x 568
110.00
151.00
167.00
246.00
Water (+20 °C), with filter element with 10 µm fineness
THOMAPOR®-Filter Housing made of SAN
Technical specification
•Material: SAN (styrene-acrylonitrile copolymer)
•Seal: Buna-N
•Colour: transparent
•Max. operating pressure: 10 bar at +20 °C
•Max. temperature: +55 °C
​
Price
Separation Technology - Filter Housings and Filter Elements
Filtration
Item
​
mm
53858
53859
53860
53861
53862
53863
250
250
250
250
250
250
1
Item
​
mm
Max.
flow rate
liquids1
l/h
94479
52863
254
254
1,000
1,500
1
Length
Internal
thread
Dimensions
ØxH
Price
​
mm
EURO
NPT 3/8“
NPT 3/4“
114 x 290
132 x 320
172.00
187.00
Water (+20 °C), with filter element with 10 µm fineness
THOMAPOR®-Filter Element with Non-Woven Fabric
for technical use
Application area
•Filtration of dyes, lacquers, solvents, latex, fuel, lubricating oil, heating
oil, diethanolamine, naphtha, petroleum, adhesive, water, perchloroethylene, trichloroethylene, gases, cutting and cooling emulsions, resins,
roll emulsions.
Product specification
•Very high throughput and graduated deep-bed filtration
•Excellent dirt uptake capacity and high pressure stability
•Max. temperature: up to +120 °C, for a short time up to +140 °C
•The performance is indicated at a pressure difference of 0.15 bar and
viscosities of 1 °E, 3.7 °E and 9.5 °E.
•Manufacturing process: the filter layers of the filter elements are very
stable bonded with epoxy resin, thus guaranteeing the outstanding
filtration properties.
•The filter elements fit following housings:
Item 94482: filter length 125 mm
Items 94445, 52851, 52853, 94479, 52863: filter length 250 mm
Length
Filter Max. DR
fineness at 1 °E1
µm
l/h
1
5
10
25
50
100
510
1,350
1,600
1,800
2,000
2,200
Max. DR
at 9.5 °E1
l/h
Unit
Price
piece
EURO
50
130
230
270
480
600
1
1
1
1
1
1
23.00
23.00
23.00
23.00
23.00
23.00
DR = delivery rate
THOMAPOR®-Filter Element with Non-Woven Fabric
for pharmaceutical use
Application area
•Pharmaceutical industry
•Food processing and beverage industry
•Chemical industry and microelectronics
Product specification
•Very high throughput and graduated deep-bed filtration
•Excellent dirt uptake capacity and high pressure stability
•Max. temperature: up to +120 °C, for a short time up to +140 °C
•The performance is indicated at a pressure difference of 0.15 bar and
viscosities of 1 °E, 3.7 °E and 9.5 °E.
•Manufacturing process: the filter layers of the filter elements are
bonded with epoxy resin and therefore usable without limitations in
pharmaceutical, food processing and beverage industries.
•The filter elements fit housings (items 94445, 52851, 52853, 94479,
52863)
​
​
Item
Item
Length
​
mm
12107
12108
12109
12110
12111
12112
125
125
125
125
125
125
Filter Max. DR
fineness at 1 °E1
µm
l/h
1
5
10
25
50
100
255
675
800
900
1,000
1,000
Max. DR
at 9.5 °E1
l/h
Unit
Price
piece
EURO
25
65
115
135
240
300
1
1
1
1
1
1
17.00
17.00
17.00
17.00
17.00
17.00
Length
​
mm
53851
53852
53853
53854
53855
53856
250
250
250
250
250
250
1
Filter Max. DR
fineness at 1 °E1
µm
l/h
1
5
10
25
50
100
510
1,350
1,600
1,800
2,000
2,200
Max. DR
at 9.5 °E1
l/h
Unit
Price
piece
EURO
50
130
230
270
480
600
1
1
1
1
1
1
43.00
43.00
43.00
43.00
43.00
43.00
DR = delivery rate
THOMAPOR®-Yarn Wound Filter Element
Application area
•Filtration in chemical and pharmaceutical industries, cosmetics industry, petroleum industry, food processing industry, paints and coatings
industry, electroplating technology, water purification, nuclear power
plant construction, as well as filtration of photographic fluids.
THOMAPLAST® I - 2015 107
Separation Technology - Filter Housings and Filter Elements
Product specification
•Excellent dirt uptake due to strongly structured, helically wound filter yarn
•Large yarn assortment allows use with many media
•High flow rate throughput combines great economic efficiency
•Selected quality yarns are wound on a retaining core by a special
winding mode. The structure of the winding is carried out in such a
way that the spiral tapers off inwards. By this special winding mode
the yarn construction guarantees regularity of the filter structure and
high dirt uptake capacity.
•Depending on the application area the filters are to be manufactured
with yarns made of cotton, polypropylene or viscose and retaining
cores made of polypropylene and stainless steel.
•Application examples based on material polypropylene (PP):
For filtration of industrial water, drinking water, mineral water, condensates, deionized water, aqueous solutions (pH 3-9), electroplating
baths (pH 3-9), electroplating baths (pH <3), fluoroborate baths,
cyanide baths (alkaline), pyrophosphate baths, acids and alkalis (pH
0-14), hydrochloric acid, sulfuric acid, phosphoric acid, hydrofluoric
acid, nitric acid, pickling and phosphatizing baths, radioactive solutions, photochemical baths, lyes, hydraulic oils, heating and diesel oils,
petrols, lubricating oils, alcohols, glycerols, chlorine, hydrogen chloride,
hydrogen fluoride, and other aggressive gases.
•Application examples based on material cotton:
For filtration of industrial water, drinking water, mineral water, condensates, deionized water, aqueous solutions (pH 3-9), electroplating
baths (pH 3-9), tin baths (alkaline), pyrophosphate baths, radioactive
solutions, photochemical baths, solvents, degreasing baths, freons,
hydraulic fluids, heating and diesel oils, petrols, lubricating oils, edible
oils, edible fats, alcohols, glycerols, aggressive gases.
The filter elements fit following housings:
Item 94482: filter length 125 mm
Items 94445, 52851, 52853, 94479, 52863: filter length 248 and 254 mm
Technical specification
•Material:
Retaining core: polypropylene
Yarn: cotton
•Inside diameter: 26 mm
•Outside diameter: 63 mm
•Filter length: 125 mm (5”), 248 mm (9 3/4”) and 254 mm (10”)
•Max. temperature: with retaining core made of polypropylene up to
+80 °C; with retaining core made of stainless steel up to +130 °C
•Performance: see table (at a pressure difference of 0.15 bar and
various viscosities)
​
Material support body: PP
Item
Length
​
mm
Filter
fineness
µm
58915
58916
58917
125
125
125
0.5
1
5
108 THOMAPLAST® I - 2015
Max. DR at
1 °E1
l/h
Yarn
Price
​
EURO
55
75
225
cotton
cotton
cotton
15.00
15.00
15.00
Filtration
Item
Length
​
mm
Filter
fineness
µm
58918
58919
58895
58896
53872
53873
53874
53875
53876
53877
53878
53865
53866
53867
53868
53869
53870
53871
58897
58898
12073
12074
12075
12076
12077
53886
53887
53888
53889
53890
53891
53892
53879
53880
53881
53882
53883
53884
53885
12078
12079
12080
12081
12082
12083
12084
53900
53901
53902
53903
53904
53905
53906
53893
53894
125
125
125
125
248
248
248
248
248
248
248
254
254
254
254
254
254
254
125
125
125
125
125
125
125
248
248
248
248
248
248
248
254
254
254
254
254
254
254
125
125
125
125
125
125
125
248
248
248
248
248
248
248
254
254
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
Max. DR at
1 °E1
l/h
Yarn
Price
​
EURO
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
450
720
1,350
2,000
2,000
55
75
225
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
450
720
1,350
2,000
2,000
55
75
225
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
15.00
15.00
15.00
15.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
Separation Technology - Filter Housings and Filter Elements
Item
​
mm
Filter
fineness
µm
53895
53896
53897
53898
53899
254
254
254
254
254
5
10
25
50
100
1
Length
Max. DR at
1 °E1
l/h
Yarn
450
720
1,350
2,000
2,000
Max. DR at
1 °E1
l/h
Material
yarn
​
Price
EURO
55
75
225
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
450
720
1,350
2,000
2,000
55
75
225
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
450
720
1,350
2,000
2,000
55
75
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
cotton
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
viscose
viscose
18.00
18.00
18.00
18.00
18.00
18.00
18.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
18.00
18.00
Filtration
Price
Item
​
EURO
​
viscose
viscose
viscose
viscose
viscose
19.00
19.00
19.00
19.00
19.00
12101
12102
12103
12104
12105
53943
53944
53945
53946
53947
53948
53949
53936
53937
53938
53939
53940
53941
53942
DR = delivery rate
Material support body: stainless steel
Item
Length
​
mm
Filter
fineness
µm
12085
12086
12087
12088
12089
12090
12091
53915
53916
53917
53918
53919
53920
53921
53908
53909
53910
53911
53912
53913
53914
12092
12093
12094
12095
12096
12097
12098
53929
53930
53931
53932
53933
53934
53935
53922
53923
53924
53925
53926
53927
53928
12099
12100
125
125
125
125
125
125
125
248
248
248
248
248
248
248
254
254
254
254
254
254
254
125
125
125
125
125
125
125
248
248
248
248
248
248
248
254
254
254
254
254
254
254
125
125
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
1
Length
mm
Filter
fineness
µm
Max. DR at
1 °E1
l/h
Material
yarn
​
Price
EURO
125
125
125
125
125
248
248
248
248
248
248
248
254
254
254
254
254
254
254
5
10
25
50
100
0.5
1
5
10
25
50
100
0.5
1
5
10
25
50
100
225
360
675
1,000
1,000
107
145
440
705
1,325
2,000
2,000
110
150
450
720
1,350
2,000
2,000
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
viscose
18.00
18.00
18.00
18.00
18.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
DR = delivery rate
THOMAPOR®-Filter Cartridge with PVC Membrane
Application area
•For preparation of ultrapure water (18 Megohm quality with 0.2 µm
pore size and 14 Megohm with 0.4 µm pore size)
•For recovery of noble metals in electroplating baths
•For filtration of drinking water, pharmaceuticals, food and beverages
•For sterile filtration
Technical specification
•Material:
Membrane: high-temperature CPVC-polymer
Retaining core: PP (polypropylene)
End caps: flexible polyvinylchloride (PVC)
•Cartridge length: 248 mm (fitting housings: items 94445, 52851,
52853, 94479, 52863)
•Cartridge diameter: 70 mm
•pH-range: 1 - 11
•Max. temperature: +90 °C
•Max. operating pressure: 0.5 bar
​
Item
​
Pore
size
µm
Filter
area
m²
Max. flow
rate water
l/min.
Bubble
Point
bar
Unit
Price
piece
EURO
94444
94457
0.4
0.9
1.5
1.5
13.5
19
0.15
0.03
1
1
109.00
103.00
THOMAPLAST® I - 2015 109
Separation Technology - Filter Housings and Filter Elements
THOMAPOR®-Sintered Candle made of HDPE
Filtration
THOMAPOR®-Filter Element with Activated Carbon
for Dehalogenating
Application area
•Filtration of gases and fluids for separation of particles (clarification,
water filtration, catalyst recovery)
•Use of the porous structure and the chemical resistance (separation of
emulsions, condensate separation, diaphragm in the electrochemistry)
•Gassing of fluids by homogenous injection (feeding of oxygen in water,
formation of defined flux foam for soldering technology.
Product specification
•Resistance: alcohol, aliphatic hydrocarbons, organic compounds,
alkalis, acids, salt solutions
•The filter elements fit following housings:
Filter length 125 mm: item 94482
Filter length 248 mm: items 94445, 52851, 52853, 94479, 52863
Filter length 508 mm: items 52852, 12134
•Accessories: each sintered candle element has always to be built-in
with two flat seals in the filter housing (12131-12133)
Application area
•Dehalogenating of drinking water
•Removal of chlorine, bromine and iodine at low flow rates
Technical specification
•Material: activated carbon
•pH range: 5 - 10
•Pressure drop: 0.06 bar
•Max. temperature: up to +38 °C
•The filter elements fit following housings:
Filter length 125 mm: housing with cat. no. 94482
Filter length 248 mm: housings with cat. no. 94445, 52851, 52853,
94479, 52863
​
Technical specification
•Material: hydrophobic, porous polyethylene (HDPE)
•Max. temperature: +80 °C
​
Item
​
Max. flow rate water
l/min.
Length
mm
Unit
piece
Price
EURO
4
4
125
254
1
1
28.00
37.00
94481
12106
Item
Length
​
mm
12119
12120
12122
12121
12123
12124
12126
12125
12127
12128
12130
12129
125
125
125
125
248
248
248
248
508
508
508
508
Filter
Porosity Permeability Unit
fineness
µm
%
nPm
piece
2.5
5
20
50
2.5
5
20
50
2.5
5
20
50
35
40
40
45
35
40
40
45
35
40
40
45
30
80
180
800
30
80
180
800
30
80
180
800
1
1
1
1
1
1
1
1
1
1
1
1
Price
THOMAPOR®-Adsorption Filter with Activated Carbon
EURO
Application area
73.00
73.00
73.00
73.00
101.00
101.00
101.00
101.00
171.00
171.00
171.00
171.00
RCT®-Accessories: Flat Seals for Sintered Candle
Elements
•Decolourization of fluids such as drinking water, process water and
waste water, aqueous solutions, organic solvents and non-oxidizing
acids.
•Removal of adsorbable matters and contaminants out of fluids,
vapours and gases (e.g. acrylic acid amides out of exhaust gases),
removal of oil out of compressed air up to concentrations below 0.01
mg/m3 (standard).
•Removal of flavours and odors out of fluids, gases and vapours
•Removal of ozone out of gases up to 0.03 mg/m3 (standard)
•Dechlorination of water
Product specification
•Filter consisting of carbon-bound, sintered activated carbon, thus of
chemically purest, biologically inert carbon
•The filter elements fit following housings:
Filter length 125 mm: item 94482
Filter length 250 mm: items 94445, 52851, 52853, 94479, 52863
Filter length 500 mm: items 52852, 12134
​
Item
​
12131
12132
12133
Material
​
Dimensions
mm
Unit
piece
Price
EURO
NBR
FPM
PTFE
70/40 x 3
70/40 x 3
70/40 x 3
2
2
2
16.00
33.00
47.00
Technical specification
•Material density: 0.7 g/cm3
•Mean pore size: 20 µm
•Porosity: 63 %
•Specific permeability: 25 nPm
•Bursting pressure strength: >5 bar
•Max. temperature: +180 °C (in presence of air oxygen)
•pH range: 0 - 14
​
110 THOMAPLAST® I - 2015
Separation Technology - Filter Housings and Filter Elements
Filtration
Item
​
mm
Max. flow
rate liquids1
l/h
53816
762
1,100
1
Length
Outside Ø
Unit
Price
mm
piece
EURO
70
1
109.00
at 0.2 bar pressure and 1° E viscosity
THOMAPOR®-Filter Element with Activated Carbon electroplating technology
Item
​
12281
12282
12283
Length
mm
Inside Ø
mm
Outside Ø
mm
Unit
piece
Price
EURO
120
250
500
30
30
30
70
70
70
1
1
1
135.00
181.00
269.00
THOMAPOR®-Filter Element with Activated Carbon purification of water
Application area
Application area
•Filtration of noble metal baths in the electroplating technology
Product specification
•This special filter protects high-grade electrolytic baths for gold, silver
and platinum from being contaminated by oils, fats and concomitant
organic compounds.
•The filter elements fit following housings:
Filter length 125 mm: item 94482
Filter length 248 and 254 mm: items 94445, 52851, 52853, 94479,
52863
Filter length 496 and 500 mm: items 52852, 12134
Technical specification
•Purification of drinking water
•Purification of industrial water
Product specification
•Max. temperature: +70 °C
•Max. differential pressure: 4 bar
•Fineness: 3-5 µm
​
•All materials used for manufacturing the filter element meet the food
law. The used special activated carbon guarantees a very good taste
and odour improvement of the filtered water.
•The filter elements fit following housings:
Filter length 125 mm: item 94482
Filter length 248 and 254 mm: items 94445, 52851, 52853, 94479,
52863
Filter length 496 and 500 mm: items 52852, 12134
Technical specification
•Max. temperature: +70 °C
•Max. differential pressure: 4 bar
•Fineness: 3-5 µm
​
Item
​
mm
Max. flow
rate liquids1
l/h
53829
53830
53831
53832
53833
53834
53835
53836
53837
53838
76
102
125
152
248
254
496
508
742
762
110
150
185
220
360
365
720
735
1,075
1,100
1
Length
Outside Ø
Unit
Price
mm
piece
EURO
70
70
70
70
70
70
70
70
70
70
1
1
1
1
1
1
1
1
1
1
35.00
35.00
35.00
35.00
35.00
35.00
78.00
78.00
95.00
95.00
at 0.2 bar pressure and 1° E viscosity
Fine Filter Systems made of PVDF and PTFE
Item
Length
​
mm
Max. flow
rate liquids1
l/h
53807
53808
53809
53810
53811
53812
53813
53814
53815
76
102
125
152
248
254
496
508
742
110
150
185
220
360
365
720
735
1,075
Outside Ø
Unit
Price
mm
piece
EURO
70
70
70
70
70
70
70
70
70
1
1
1
1
1
1
1
1
1
43.00
43.00
43.00
43.00
43.00
43.00
109.00
109.00
109.00
THOMAPOR®-High-Tech Fine Filter System
made of PVDF
Application area
•Continuous gas and fluid filtration in laboratory and industry
Product specification
•Casable, highly chemical-inert and biocompatible filter system made
of PVDF for all kinds of aggressive gaseous and liquid media with
heavy-duty glass fiber or sintered PTFE-filter elements; variable
wall mounting, three field-proven system and cartridge sizes, with
screwable filter casing.
THOMAPLAST® I - 2015 111
Separation Technology - Fine Filter Systems made of PVDF, and PTFE
Technical specification
•Media contacting materials:
Filter top: PVDF
Filter casing: tempered glass
Filter candle: optionally sintered PTFE or glass fibre
Sealing rings: FPM
•Pore sizes (nominal): 2 µm for glass fibre; 25 µm for sintered PTFE
•Filter area: 60 cm2 for sintered PTFE filter element; 80 cm2 for glass
fibre filter element
•Max. temperature: +80 °C
•Max. operating pressure: 4 bar
•Free volume: 57 ml (dead volume)
•Dimensions:
Overall height: depending on element
Max. overall width: approx. 65 mm
•Diameter filter bowl: 40 mm
•Connections: G 1/4“
•Weight: approx. 0.25 kg
Filtration
Technical specification
•Material:
Filter housing: PTFE (polytetrafluoroethylene)
Filter candles: PTFE (with microporous structure)
Filter casing: tempered glass
•Filtration rating: 5, 25, 50 or 100 µm
•Filter surface: 48 cm2
•Max. temperature of medium: +180 °C
•Connection: internal thread G 1/8“
•Fastening thread: M4x10
​
​
Item
​
Filter fineness
µm
Max. flow rate gases1
l/h
Price
EURO
5
25
50
100
900
900
900
900
344.00
352.00
360.00
368.00
341683
341684
341685
341686
1
Item
​
Design1
​
15507
15508
15509
system
system
system
filter element for
155101
15507
filter element for
155111
15508, 15509
filter element for
155121
15508, 15509
Material
filter
​
Filter area
cm²
Pore
size
µm
Price
EURO
glass fibre
sinter PTFE
sinter PTFE
80
60
60
2
2
25
251.00
305.00
305.00
glass fibre
80
2
42.00
sinter PTFE
60
2
148.00
sinter PTFE
60
25
148.00
System: complete system, quick-acting closure, without condensate
bleeder, filter element
1
THOMAPOR®-High-Chem Fine Filter made of PTFE
for Front Panel Installation
Application area
•Filter system for front panel installations.
•The filter can also be installed as a 19“ rack module in analysis
systems.
Product specification
•Hose or pipe lines are placed behind the front panel.
•Filter is easily accessible from outside by release of the sight glass.
•The sight glass allows visual assessment of the contamination level
from outside.
•At high contamination level the filter cartridges can be quickly and
easily replaced by release of the sight glass at the front side.
•Accessories: THOMAPOR®-High-Chem PTFE filter cartridges with
microporous structure.
112 THOMAPLAST® I - 2015
Air (l/h at 0.1 bar)
RCT®-Accessories: High-Chem Filter Cartridge
made of PTFE with Microporous Structure
​
Item
​
341687
341688
341689
341690
Filter fineness
µm
Unit
piece
Price
EURO
5
25
50
100
3
3
3
3
48.00
51.00
57.00
63.00
ThomaPLAST® I
To provide you with the best
possible information about
the application areas of our
products, we take great care
to give you a detailed, precise
and technically up-to-date
description.
However, please note, that we
cannot be held liable for any
errors. Any values given are
recommendations only that
have been tested under
normal conditions.
We suggest, that you test the
product under the appropriate
conditions determined by your
specific use of the application.
If you need any help, we will
gladly share our experiences
with you to give you further
assistance.
Our product range is clearly
classified into four product groups
and presented in detail in other handbooks.
THOMAFLUID® I-V
Hoses, dosing and
connection technology
THOMAPLAST® I-V
Laboratory plastics,
semi-finished products,
closure and fastening elements
and gaskets
THOMAPOR®
Separation technology
THOMADRIVE®
Drive technology
Examples of the extremely wide
range of products are employed
in virtually every sector of industry.
The spectrum extends from hoses and
fluids technology through elastomers
and semi-finished products, plastics and
bonding technology to laboratories and
filtration technology.
The prices in this handbook
are valid for the currency area
of the „European Union“ !
No minimum order.
Subject to technical and
price change.
© 2015 Copyright by
Reichelt Chemietechnik
GmbH + Co.
Request our complete programme free of
charge and without obligation or visit our
homepage at
www.rct-online.de
Reichelt
Chemietechnik
GmbH + Co.
Englerstraße 18
D-69126 Heidelberg
Germany
Tel. +49 6221 3125 0
Fax +49 6221 3125 10
email:
[email protected]
Internet:
www.rct-online.de
Shopping per mouseclick
www.rct-online.de