6th Edition - International Lubricants Inc.

Comments

Transcription

6th Edition - International Lubricants Inc.
6th Edition
INTRODUCTION
Why LUBEGARD is the choice of Professionals ................. 2
The Unique Difference .................................................... 3-5
AUTOMATIC TRANSMISSION PROTECTION
Automatic Transmission Fluid Protectant ......................... 6-7
ATF Flush & Protect Pack .................................................. 7
Platinum Universal ATF Protectant ................................... 8-9
Platinum Flush & Protect Pack ............................................ 9
Highly Friction Modified ATF Supplement .......................... 10
M-V Automatic Transmission Fluid Supplement ................ 11
Transmission Flush ......................................................... 11
CVT Universal Fluid ......................................................... 12
ALL-PURPOSE LUBRICANTS
Premium Universal Lubricant ............................................ 13
Lube’n Loosen ................................................................ 13
REBUILDING ESSENTIALS
Kooler Kleen .................................................................... 14
Assemblee Goo (Green/Firm Tack) .................................. 15
Assemblee Goo (Blue/Soft Tack) ..................................... 15
Power Kleen ................................................................... 15
Transmission Assembly Treatment .................................. 15
Threadlocker ................................................................... 15
Instant Shudder Fixx ....................................................... 16
Bio-Tap Tapping Oil .......................................................... 16
Seal-E-Zee Products ....................................................... 17
ENGINE & GEAR PROTECTION
BIO-TECH Engine Oil Protectant ................................... 18-19
Engine Flush .................................................................... 19
Engine Flush & Protect Pack ............................................ 19
Free-Eze ......................................................................... 20
Two-Cycle Engine Oil ....................................................... 20
Limited Slip Supplement ................................................... 21
Gear Fluid Supplement ..................................................... 21
POWER STEERING PROTECTION
Power Steering Fluid Protectant ....................................... 22
Power Steering Fluid ....................................................... 22
Power Steering Flush ...................................................... 23
Power Steering Performance Pack .................................. 23
Power Steering 2-Step System for flush machines .......... 23
COOLING SYSTEM PROTECTION
Supreme Coolant Treatment ............................................. 24
Radiator Flush ................................................................. 24
Cooling System Flush & Protect Pack ............................... 24
Electrolysis Indicator Tool ................................................ 25
Evaporator/Heater Foam Cleaner ..................................... 26
BRAKE SYSTEM PROTECTION
Brake Finishing Treatment ............................................... 27
Universal Brake Grease .................................................. 27
FUEL SYSTEM PROTECTION
PRO II 9000 Fuel System Products ................................... 28
MOTORCYCLE PROTECTION
Engine Oil Protectant ....................................................... 29
Coolant Treatment ........................................................... 29
Primary Case Chain Protectant ........................................ 29
Transmission Protectant .................................................. 29
HEAVY DUTY PRODUCTS
Heavy Duty Power Transfer Protectant ........................... 30
Heavy Duty Gear Protectant ............................................ 30
Heavy Duty Engine Protectant ......................................... 30
Heavy Duty Coolant Treatment ........................................ 30
MARINE PROTECTION
Marine 4 Cycle Engine Oil Treatment ................................ 31
Marine 2 Cycle Oil & Engine Treatment ............................. 31
Marine Power Transfer Fluid ........................................... 31
Marine Gear Oil Supplement ............................................. 31
Marine Cylinder Rescue ................................................... 31
All Purpose Marine Lubricant ........................................... 31
SMALL EQUIPMENT
Power Shield 2 Cycle Oil & Re-Conditioner ....................... 32
Power Shield Anything & Everything Lube ...................... 32
Power Shield Bar and Chain Oil .............................. 32
2
PRODUCT SPECS. ..................................... 33-35
Why LUBEGARD is the
performance choice
of Professionals.
LUBEGARD is used, endorsed,
recommended and approved by
multiple major OEM’s (Car
Manufacturers)
LUBEGARD is named as the written
solution in eight OEM technical
service bulletins.
LUBEGARD is a world leader in
innovative synthetic molecular
technologies, and holds over 100
combined U.S. and foreign patents.
LUBEGARD was selected by OEM’s
because International Lubricants,
Inc., is one of a few exclusive
research and development
manufacturers who produce their
own unique synthetic materials.
LUBEGARD is recommended and
endorsed by the largest
transmission repair chains:
AAMCO®, Cottman®, and Lee
Myles®.
LUBEGARD has been awarded the
most TOP SHOP PRODUCTS and
TOP TOOL Awards by professional
transmission technicians year after
year.
LUBEGARD won the prestigious
‘Product of the Year’ award for its
patented LXE Technology from
Lubricants World.
LUBEGARD has helped countless
professional rebuilders reduce their
number of comebacks for over two
and half decades.
Unlike ILI’s competitors, (who
purchase prepackaged additives
from commodity chemical
companies and mix them together),
ILI formulates its own raw materials
and molecules to create the unique
derivatives found only in LUBEGARD
patented products.
The Unique Difference
Years Ago...
Sperm whale oil and its derivatives
were used as lubricant additives in
virtually all automotive applications
because of the whale oil’s
exceptional lubricity (wetting agent)
and heat resistance. Whale oil was
so effective— that a car's
transmission fluid was generally
never changed. Over 30 million
pounds of whale oil was used per
year in lubricants alone!
In 1972, the Endangered Species
Act outlawed the killing of whales and
the use of whale oil.
But then..
No suitable replacement for whale
oil was available. This resulted in a
dramatic drop in performance. In
particular, the heat transfer and
heat resistance properties in ATFs
were severely reduced.
Transmission failures skyrocketed
from just under one million, to over
EIGHT million by 1975, due to the
loss of sperm whale oil additives.
Today's Solution;
International Lubricants, Inc. (ILI) in
conjunction with Dr. Philip Landis,
a highly distinguished research
chemist who headed the Mobil Oil
Applied Lubrication Research
Group, developed and patented the
first and only high temperature
sperm whale oil replacement LUBEGARD synthetic Liquid Wax
Ester (LXE®) Technology.
LUBEGARD's unique synthetic
LXE Technology is proven to
actually outperform the sperm whale
oil additives! Independent third party
testing proves LUBEGARD reduces
component wear by at least 50%,
reduces oxygen uptake (oxidation)
by 30% and reduces pentane
insolubles (sludge) by 60% when
added to GM® factory fill. (Reference
oil for DEXRON® approval).
Don’t Just Take Our
Word for it...
ILI's ground-breaking research
has led to research grants in
excess of $2 million from the
U.S. Department of Agriculture,
the Department of Defense
and the Soy Bean Board. The
Agricultural Research and
Commercialization
Corporation, a division of the
USDA, believed so strongly in
ILI's products and research, they
had invested and owned stock
in the company.
Today, LUBEGARD Automatic
Transmission Fluid Protectant
is the number one product
used in the professional
transmission rebuild industry,
and the only product of its kind
to be used and approved by
major
automobile
manufacturers (OEM’s).
The sperm whale was named for the
valuable spermaceti oil (wax) that this whale
produces in the spermaceti organ (located
in its head). It has the largest brain of any
animal, weighing about 20 pounds (9 kg)!
The most famous sperm whale still to this
day is from the fictional novel Moby Dick
and was written by Herman Melville in 1851.
Dr. Landis is a worldwide leader in the
mechanistic studies of elimination,
rearrangement and pyrolysis reactions of additive
preparations for fuel and lubricant applications,
and of catalytic organic reactions and
petrochemicals. He holds more than one hundred
patents. Dr. Landis still regularly consults with
International Lubricants and heads up the
chemical research and development activities.
3
WHY
...is LUBEGARD the ONLY product of its kind
used, approved, designated and endorsed by
OEM’s (Car Manufacturers)?
BECAUSE THE
SYNTHETIC
ESTERS FOUND IN
LUBEGARD LXE®
TECHNOLOGY ARE
THE MOST HEAT
STABLE THAN ANY
OTHER PRODUCT EVER SOLD.
And for those of us without a Ph.D. in
chemistry, what that all boils down to is
this: LXE functions primarily by removing
heat from frictional surfaces, which can
see surface temperatures in automatic
transmissions of more than 300-500°F.
LXE absorbs the heat at metal surfaces
and transfers that heat to the metal
housing, where it is dissipated.
You see, it’s at the
molecular level that
lubricants are
different. Blending of
various components
allows that molecular
structure to translate
to the characteristics
needed to fight
oxidation, prevent heat
buildup, suspend addpacks and other
important functions.
Structurally, LXE is
closely related and
Actual LXE® Technology
performs similarly to
chemical reactors
sperm-whale oil.
LUBEGARD’s LXE
LUBEGARD proprietary Technologies LXE®
Technology is a 40-42
and Synergol® are functional molecules made
carbon atom synthetic
in special chemical reactors.
ester (44 is spermwhale oil) with 20-22
carbon acid atoms
and 20 carbon alcohol
atoms. The secret to
this technology is that it makes an ester
grouping right in the center of the structure
that binds the molecule together, making the
new synthetic ester flow at low temperatures,
oxidatively stable, with very little unsaturation;
thus making it much
more stable than any
other synthetic
molecules.
The LXE molecule is a
large ester chain with
one double bond making
it more oxidatively stable
and imparting fluidity.
The double bond is
critical for providing a
site to add functional
groups, such as
phosphorous or sulphur.
Shown in the diagram, carbon atoms are
blue, hydrogen are yellow and oxygen
atoms are shown as red.
4
LUBEGARD WITH
LXE®...
• Reduces temperatures
• Increases the fluids ability to transfer
heat. LXE® Technology is proven the
best at dissipating heat due to its
unique wetting action.
• Raises the thermal, shear and
oxidative stability – Proven to
reduce oxidation by 30%.
LUBEGARD is so heat stable it
outperforms it’s nearest competitor
by over 100°F!
• Extends Oil Drain Intervals
• Eliminates fluid foaming
• Reduces friction and wear LUBEGARD products increase the
chemical protection of the metal
surface and provide for a complete
smoother running operation.
Proven to reduce component wear
by at least 50%!
• Provides superior boundary
lubrication. Because of its unique
polarity properties, LUBEGARD
contains unsurpassed metal adhesion
properties to reduce friction at low
sliding speeds.
• Optimizes overall performance
• Safely conditions and restores seal
flexibility; especially in older and high
mileage vehicles, unlike harmful seal
swell products. LUBEGARD's LXE®
Technology is the most seal friendly
technology available on the market
today.
Testing proves LXE® Technology to be
the most heat stable molecule
THE TECHNOLOGY
BEHIND LUBEGARD’s
SYNTHETIC ESTERS
Heat being transferred to the
outer case by esters
LUBEGARD esters are most
famous for their “heat sink” abilities.
Heat sink is the absorption of heat,
in the oil phase generated at
frictional surfaces, such as gear, or
gear teeth.
Competing additives can
actually trap in excess heat in
a transmission’s critical
functional areas - likely
resulting in failures.
In mechanical systems heat is
absorbed from the frictional surface
through the bulk oil (whether it's
synthetic or mineral), and is carried
to and discharged out the container
walls. For example, in the automatic
transmission the heat is carried and
discharged to the outer metal
housing and cooling system.
When two metal surfaces
come in close contact, they
compress the oil molecules at
the metal-oil interface. The
friction generated at that
interface generates heat (just
like rubbing your hands
together - you feel frictional
heat on your skin).
When LUBEGARD LXE®
(Liquid Wax Ester)
Technology is present in the
oil, its molecules are
absorbed at metal interfaces
soaking up the heat and
transferring it to the bulk oil
from the metal surface.
The oil and LXE molecules
containing the heat are then
dispersed to the metal
housing where it is
dissipated to the atmosphere
(surroundings).
The Lubrication properties of
LUBEGARD are unparalleled!
BOUNDARY LUBRICATION
Here’s how LUBEGARD
works in both types of
mechanical lubrication;
HYDRODYNAMIC LUBRICATION
Definition: Lubrication system where moving surfaces
are actually separated by an oil film, eliminating all metal
contact. Also referred to as “full film” lubrication.
In other words; when metal surfaces do not come
close together or ever touch each other. In a
mechanical assembly it's the viscosity of the fluid
that creates the fluid film. That's why using the
right additive is crucial! The movement of metal
surfaces creates friction between the surfaces.
LUBEGARD's LXE molecules actually REMOVE
the heat and displace it to the outer core, thereby
shielding, or protecting the internal components.
HYDRODYNAMIC
LUBRICATION
Definition: Conditions that do not permit the formation of lubricant film.
In other words, areas where surfaces actually touch. As in metal
to metal contact.
HOW DOES LUBEGARD LXE® TECHNOLOGY WORK
DURING BOUNDARY LUBRICATION?
Simply, metal surfaces have a positive charge. The molecular
makeup of LXE Technology provides a very long linear chain of
carbon atoms that are surrounded by oxygen atoms. The oxygen
atoms have a negative charge, therefore attracting the molecule
to the metal surfaces. Advantageously, when the LXE molecules
are heated in internal critical components, the attraction of the
atoms moves the heat outward in a spiral centrifugal force
(similar to spinning a toy top in a puddle of water) and keeps it
harmlessly at bay in the outer metal case. LUBEGARD LXE
molecules actually attach to the metal surfaces - and then are
released (instead of scraping or scoring the metal) and instantly
reforms again, then released again, reforms, released again
and continues to reform infinitely.
BOUNDARY
LUBRICATION
5
ATF PROTECTANT
without
LUBEGARD
with
LUBEGARD
ATF
9 out of 10 Transmissions
FAIL due to HEAT!
The Burnt Oil Test (at left)
For this test, regular, off-the-shelf ATF was purchased then placed
in a lab oven for 48 hours @ 325°F, with and without LUBEGARD.
The results are CLEAR. LUBEGARD with LXE® is the proven,
unsurpassed leader in preventing heat, sludge, acid and oxidation
build up in ATF’s.
Don’t Just Take OUR Word for it!
LUBEGARD has been the
solution in eight known
OEM service bulletins!
More Testimonials
6
The best advice that I have is after transmission replacement jobs
make sure to add LUBEGARD ATF Protectant. This will help to
clean up sticky valves and also lubricate the transmission. There will
also be no overheating and lube on the o-rings.
- Pak Lee, Center Auto Repair
All trademarks are owned by their respective companies.
ATF PROTECTANT
LUBEGARD® AUTOMATIC
TRANSMISSION FLUID PROTECTANT
• For use with any required *ATFs!
• Prevents overheating, reducing elevated
operating temperatures up to 40°F
• Extends fluid life
• Eliminates transmission fluid foaming and
oxidation
• Reduces wear throughout the transmission
• Eliminates clutch chatter and torque converter
shudder
• Optimizes total transmission performance
• Softens and modifies harsh shifts providing for
smoother shifting
• Eliminates objectionable noises during shifts
• Keeps valves and governors free and frees
stuck valves in valve bodies
• Assists in eliminating warranty comebacks
• Raises the thermal and oxidative stability of
the fluid
• Only protectant that increases the fluid’s
ability to transfer heat
• Does not contain any harmful components
such as zinc (ZDDP) ash, etc.
• Protects new seals and permanently restores
older seals to a "like-new" condition, without
adverse side effects
PART # 50902
(10 oz)
PART # 60902
(10 oz)
* Except Ford Type F ATF and CVT applications
LUBEGARD is the only transmission protectant to win the prestigious
‘Product of the Year’ award for its synthetic LXE® (Liquid Wax Ester)
Technology from Lubricants World, 1994.
Also available in
a flush and
protect pack
TEST DESCRIPTION: Samples of products were added in proper proportions to DEXRON® III ATF
and were tested for the Total Acid number. They were placed in an oven at 325°F for 48 hours,
then removed and tested for the Total Acid number again.
PART # 98602
ONLY LUBEGARD is proven to reduce acid formation!
7
LUBEGARD® PLATINUM® UNIVERSAL AUTOMATIC
TRANSMISSION FLUID PROTECTANT
• For use with any specified ATF recommended by
the car manufacturer, such as; OEM types and
DEXRON®/MERCON® ATFs
(Except Ford Type F ATF or CVT applications)
• Enhances DEXRON® III, VI/MERCON®, V ATF’s
to perform like MERCON® V ATF
• Enhances DEXRON® III, VI/MERCON® , V ATF to
perform like a highly friction modified ATF,
such as;
Honda® Genuine ATF
Toyota® Type T/TII/TIV
Mopar® ATF + 3® (7176)
Mopar® ATF +4® (9602)
And all other highly friction modified ATF's
• Prevents overheating
• Dramatically reduces friction and wear on metal
parts and internal components
• Will not alter the crucial sulfur balance in your
transmission fluid
• Will not harm yellow metals
• Inhibits fluid oxidation and foaming
• New Synergol® TMS Technology, a synthetic
molecule, tightens the shift cycle without
loosing the friction modification at lockup, which
eliminates shudder
• Eliminates torque converter shudders
• Ensures proper shifts
• Frees stuck valves and keeps them free
• Extends fluid change intervals
• Protects and restores seals for optimum
performance
• Conditions and restores seals and o-rings
• CONTAINS ABSOLUTELY NO ZINC!
SYNERGOL® is the FIRST and ONLY
Nonactive Low Phosphorous-Based
Surface Molecule.
PART # 63010
(10 oz)
PART # 63016
(15 oz)
PART # 63032
(32 oz)
Also available in
a flush and
protect pack
PART # 98010
SYNERGOL, when added to existing anti-wear
compounds, drastically reduces wear on parts and
metal surfaces. In fact, lubricant performance will
extend far beyond normal fluid life. And, because it
is not consumed, SYNERGOL’s effectiveness
increases over time, providing continuous protection
to all internal parts of the transmission.
LXE is the only synthetic linear liquid wax ester
proven to outperform Sperm whale oil. The unique
molecular structure of Liquid Wax Ester (LXE)
Technology allows unsurpassed transfer of heat,
which also withstands the highest operating
temperatures.
8
All trademarks are owned by their respective companies.
Since 1984, International Lubricants Inc. (ILI) has been a world
leader in the research, development, manufacturing, marketing
and sales of patented high performing synthetic lubricants and
related products for the Automotive, Industrial, Marine and
Agricultural Industries.
OE-ATF ALTERNATIVE PRODUCTS
Together
SYNERGOL® TMS
and LXE® (Liquid
Wax Ester)
Technologies
provide the most
powerful and
complete
transmission fluid
performance
additive ever
invented.
Sam Memmolo is an ASE Certified Master Auto
Technician with L-1 Advanced Drivability Rating
since 1977. Sam is also a nationally known cohost and writer of the respected TV series
Shadetree Mechanic®, Crank &
Chrome®, Two Guys Garage®, and
most recent, MotorHead Garage®
and producer and host of the
nationally broadcasted
radio show Sam’s
Garage® .
More Testimonials
We pour one bottle of LUBEGARD Platinum in every converter we put in. -- Arthur Siegel, Cottman Transmission
I used LUBEGARD Platinum on a ‘02 Galant and am glad to report outstanding results. When cold, it was slow to engage in drive after the LUBEGARD product and running the vehicle, it restored the normal operation of shifting to drive when cold. I called your
offices to report my results and received additional information from a knowledgeable person about appropriate ATF fluids and
maintenance procedures. -David T. Hanson
LUBEGARD Platinum Universal ATF, I can use it for all transmissions. I put it in every overhaul and I don’t have to worry if I put in
the right fluid in it. - Marco Schatzmann
9
OE-ATF ALTERNATIVE PRODUCTS
LUBEGARD® HIGHLY
FRICTION MODIFIED
ATF SUPPLEMENT
• Eliminates the need for multiple OEM fluids
• Converts DEXRON®/MERCON® ATF into any
highly friction modified ATF
• Recommended for use in Ford AODE and
4R70W transmissions with shudder problems
that do not require MERCON® V ATF
• Does not contain zinc (ZDDP)/ash
• Conditions and restores seals and o-rings
• Also contains same benefits as LUBEGARD
ATF Protectant
The Subaru bulletin was created by ILI to
accurately translate the German Subaru
recommendation as well as show the back
of the product with the official Subaru part
number from the dealerships.
PART #
61910
More Testimonials
I have been building transmission for the last 35 years, starting
my own business back in 1979. Over the years, we have
managed to gain a few fleet accounts; we all know that fleet
accounts are great but sometimes it seems that those repairs are
tough to keep on the road. The people that drive test vehicles
don’t have to pay for the repairs, “Let’s do a few burnouts and
heat everything up a little”. We have one account that after
overhauling their transmission they would be good for about
80,000 miles; you could set your calendar by it. About three
years ago, we started adding a bottle of LUBEGARD Highly
Friction Modified ATF Supplement and now those same
transmissions are going 120,000 miles. WOW!!! Adding a bottle
of LUBEGARD is the only thing that we have changed. I have
never been a believer in additives but I am sold on this stuff.
-Lonnie Nyland, Nyland Automatic Transmission Service
10
OE-ATF ALTERNATIVE PRODUCTS
LUBEGARD® M-V ATF
SUPPLEMENT
• Eliminates the need for MERCON® V ATF
• Enhances DEXRON®/ MERCON® ATF to perform like a
MERCON® V ATF
• New Synergol® TMS Technology tightens the shift cycle
without loosing the friction modification at lockup which
eliminates shudder
• Does not contain zinc (ZDDP) ash
• Conditions and restores seals and o-rings
• Also contains same benefits as LUBEGARD ATF Protectant
PART # 62005
○ ○ ○ ○ ○ ○ ○Make
○ ○ ○ ○ ○ ○ ○Manufacturer’s
○ ○ ○ ○ ○ATF○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® TRANSMISSION FLUSH
• Safely removes varnish deposits
• Prepares transmission for new fluid
• Cleans internal transmission components
• Contains rust and corrosion inhibitors
• Does not contain harmful solvents
• Safe for all seals
WHY FLUSH? Today's automotive systems have tighter internal tolerances
and are designed to operate cleaner and hotter than ever before. While these
improvements have greatly decreased pollution, increased gas mileage and
extended the life of these precision systems, additional stress has been
placed on both the oils and additives. The need to keep these systems free
of varnish, sludge, and any other by-products that cause wear and reduce the
performance of these units, is important to the total longevity of the complete
system.
PART # 95001
11
CVT PRODUCTS
LUBEGARD®
UNIVERSAL CVT FLUID
• Suitable for use in ANY belt type CVT (continuously variable
transmission) application. (When used in Honda applications
20,000 mile service intervals are recommended)
• Minimizes friction between belts and pulleys which protects
against fatigue damage
• Maintains the performance of a continuously variable
transmission by providing excellent wear protection
• Imparts both shear and oxidation stability to the fluid
• Remains fluid at low temperatures for excellent operation
during winter
• Prevents sludge and
varnish build up
PART # 67032
Call for your
FREE CVT
Application
Chart
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
ATF CONVERSION AND
REFILL CHART
• Over 10,000 applications
• Instantly determine a vehicle’s factoryfill fluid, plus fill level
• Voted #1 resource every year, 13
years in a row by professional
technicians
• Includes CVT applications
• Includes the most common export
applications
• Includes dual clutch transmission
applications
12
16
All trademarks are owned by their respective companies.
ALL PURPOSE LUBRICANTS
LUBEGARD® PREMIUM UNIVERSAL LUBRICANT
• Specially designed for automotive equipment rebuilders, but great
for general lubrication needs
• Keeps valves and governors free during assembly
• Easy to use, simplifies and expedites the transmission assembly
process
• Contains biosynthetic formula with superior cold flow properties
• Environmentally responsible, nonaerosol and nonflammable,
Biodegradable (EPA/560/6-82/003), aquatically nontoxic (EPA/
600/4-90/027), and user friendly
• Lubricates solenoid valves and other mechanical components
• LXE Technology has a natural polarity that strongly attaches to
metal surfaces providing superior lubrication
• Excellent penetrant and protects against rust
• Not harmful to seals or O-rings
• Will not harm wiring harnesses
PART # 61016
(16 oz)
PART # 61004
(8 oz)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
LUBE‘N
LOOSEN
LUBEGARD Lube N Loosen™ is specially formulated with LXE (Liquid Wax
Ester) Technology to provide a biodegradable all-purpose lubricant that will
not cause harm to the environment. This unique product can be used to
instantly stop squeaks, free sticky mechanisms, loosen rusted bolts and
lubricate countless other applications.
• Biodegradable (EPA/560/6-82/
• #1 Proven All-Purpose Lubricant
003) and aquatically nontoxic
• Lasts 10 times longer
(EPA/600/4-90/027)
• Protects against rust and corrosion
• Won’t irritate sensitive skin
• Non-aerosol and nonflammable
PART # 61444
All trademarks are owned by their respective companies.
13
REBUILD ESSENTIALS
Dr. Tranny®
KOOLER KLEEN™
• Prevents contamination of
new or rebuilt unit
• Removes grease, dirt,
sludge, grime and metal
shavings
• No water/soapy residue to
contaminate new
automatic transmission
fluid
• Does not contain ozone depleting chemicals or CFC’s
• Does not contain chlorinated solvents
• Formulated to not harm seals or degrade new automatic
transmission fluid
• Prevents costly comebacks
Standard 5/8" tip shown. Universal tip available
for other makes and models.
PART # 19001
A 3-in-1 Product!
(1)- Transmission cooling line
flush cleaner
(2)- Electronic transmission
cleaner (solenoid & wire
harnesses) electronic engine
connections (computers,
sensors & wiring)
14
(3)- Dielectric protectant,
ensures a proper electronic
connection
CONTAINS ABSOLUTELY
NO CAUSTIC WATER!
SAFE FOR YOUR TRANSMISSION...SAFE FOR YOU!
REBUILD ESSENTIALS
Dr. Tranny®
Assemblee Goo™
Effective up
to 130°F
• Provides your choice of tack strength, firmer
(green) great for summer months and lighter
tack (blue) great for winter months
• Facilitates and provides lubrication during
the transmission assembly process
• Dyed green or blue to prevent
misdiagnosing leaks
• Will not melt at shop temperatures
• Not harmful with prolonged skin contact
• Will not clog filters
• Dissolves quickly at operating temperatures
• Compatible with all transmission fluids
PART # 19250
Effective up
to 116°F
PART # 19260
Dr. Tranny Assemblee Goo is formulated for use as an
assembly aid and lubricant for virtually any assembly
application (including engines!). It provides lubrication and
helps facilitate the assembly process, by holding
components such as needle bearings and hydraulic seals
in place. Simply apply to O-rings, seals, bearings, gaskets,
sealing rings, bushings, thrust washers and much more.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Dr. Tranny®
Power Kleen™
2- in 1 product!
For Cooler Line Flushers:
• Improves performance of cooler
line flushing machines
• Excellent for reversing hot flush
machines for cleaning coolers
• Helps remove dirt, contaminates
and sludge from transmission
cooler systems
For Cleaning Tanks:
• Enhances new and renews existing nonwater solvent based cleaning solutions
• Improves the performance of all part
cleaning equipment
• Provides antirust protection on the
washed parts
• Mixes with ALL non-water based cleaning
solutions
• Increases non-water solvent based
cleaning solution life
• Saves you money
PART # 19101
Dr. Tranny® THREADLOCKER
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Excellent for use to
lock threaded
components in engine
carburetors,
transmissions, gear
boxes and any other
assemblies that require
threadlocking.
PART # 13250
• Effective from -65°F
to 400°F
• Seals threads
• Keeps bolts securely
fastened
• Prevents rust and
corrosion
• Short cure time
• Bond is resistant to
solvent, water and oil
Dr. Tranny® TRANSMISSION
ASSEMBLY TREATMENT
• Synthetic polymer provides very
light tacking agent and adheres
virtually to every surface; metal,
rubber, plastics, etc.
• Helps parts fit together quicker
• Maintains tackiness at high
ambient temperatures
• Mild and user friendly to hands
• Nontoxic
• Clear formula allows identification
of possible contamination
• Safe on all seals, gaskets, and
rubber components
• Compatible with and dissolves in
PART # 19420 all transmission fluids
15
REBUILD ESSENTIALS
The
ORIGINAL!
Dr. Tranny®
INSTANT
SHUDDER FIXX™
• A concentrated friction
modifier formulated specifically
for instantly eliminating torque
converter lockup shudder
• Provides 4x's less wear than
regular ATF
• The original shudder fix
• For long term benefit, use
LUBEGARD ATF Protectant
PART # 19610
Also available in a
retail clamshell
PARTpack.
# 19680
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® BIO-TAP
Tapping Oil
PART #’s
81915 (15 oz)
81901 (1 gal)
81905 (5 gal)
81955 (55 gal)
16
• Extends the life of the bit
• Ensures exceptional finish
• Eliminates galling and seizing
• Aquatically nontoxic
• Fully biodegradable
• Contains biodegradable anti-misting
additive
• Derived from renewable resources
• Safe and easy to use and clean up
• Environmentally responsible
• Nonirritating
• Washes off with water
• Nonflammable
• Increases through-put
• Improves tool performance
• Eliminates solvent degreasing
chemicals, vapor degreaser dangers
and high VOC solvents
• Reduces worker dermatitis and
asthma related symptoms
• Can be extended with water for cost
savings
• Very low coefficient of friction
• Does not contain chlorine, phenols or
toxic metals
• NFPA rating of 1 for Fire and Safety,
and 0 for Reaction on all metals
• Free of all regulated chemicals
More Testimonials
“If you don’t have
access to a
continuous flow
reaming station,
LUBEGARD BioTap (#81915) has
Bob Warnke
excellent cutting
and lubrication qualities. Bio-Tap is
often used during reaming
demonstrations, when a continuous
coolant is not available. With these
add-in fluids, the chips must be
flushed manually to obtain the
proper finish and extend reamer life.
I prefer the water soluble
reaming fluids. The
continuous flow removes
chips, (when mixed
properly), improves the
surface finish, and
extends the life of the
reamer. In this instance, I use
LUBEGARD Heavy Duty Water
Soluble Cutting Oil (#80901) , and mix
it slightly higher than the 1-20 water
ratio.”
If you ream often enough, you can
make your own reaming station. For
more information on how to make your
own station, go to: www.sonnax.com/
technical-library/transmission
REBUILD ESSENTIALS
SEAL-E-ZEE® an innovative, safe
and easy to use spray-on product
for installing and seating difficult
seals without damaging them.
Seal-E-Zee Cones
PART # 19600
• Works with all types of
rubber and Teflon® rings
• Fast and easy with instant
results
• Formula will not harm seals
• Confidence that even the
most difficult applications
have been installed
correctly without damage.
Step 1 is for ALL
applications
Two-Step System
PART # 19522
Seal-E-Zee Xtreme
Seal-E-Zee Original PART # 19501
PART # 19500
Seal-E-Zee Original
PART # 19502
Inspired by the latest OEM sealing assembly technology,
LUBEGARD® SEAL-E-ZEE with LXE® Technology safely prepares
any rubber material for quick, trouble free installation. This includes:
lip seals, o-rings, bearings, bushings, valve body end caps, Teflon®
seals, hydraulic pumps, valves, etc., for use in a wide range of
industries. Not sure where to start? We suggest getting the SEALE-ZEE Starter Kit, Part # 19222, it comes complete with both Step
1 & 2, cone set, and instructions with DVD.
NEW!! SEAL-E-ZEE Application Cone Set specifically for
GM 5L40E Based on customer feedback, ILI is pleased to
announce the immediate availability of our newest cone set.
This new modified cone kit is now available specifically to
help make fitting the GM5L40E pistons a
snap by allowing better access to all
rubber areas. Part # 19540
Step 2 with extreme
fitting power is for
tougher applications
SEAL-E-ZEE is a MUST for the following difficult applications;
A604
A500/A518
TF8
A4LD
CD4E
AX4S
4R70W
5R55N
5R55W
4L30E
4L30E
4L80E
5L40E
RE4R01A
JR403E
JF506E
TAAT
VW
KM Series
CVT
Low/Reverse piston
Overdrive brake piston
3rd/Reverse lip seals
Center support rings
All molded pistons
Reverse drum piston outer seal
Reverse input drum piston seals
Forward & intermediate piston
Forward clutch piston seals
3rd clutch piston
Solid Teflon® rings
Direct clutch piston
Molded pistons
Low/reverse piston
Center support-umbrella seals
Low clutch piston lip seal/ balance piston
Piston seals
All molded pistons
Overdrive clutch lip seal
Various pistons
A demonstration using Chrysler A518 pistons;
Add the inner and outer
loose seals to the piston.
Select the 2 cones that fit
around or within the 2 piston
seals. Also choose another
cone that the piston can rest on.
Spray Step 1 to both outer
and inner seals.
Repeat the process using
SEAL-E-ZEE Xtreme Step 2
Remove the piston from the
cones, locate the 2 pegs, and
insert the piston into the
cylinder with ease.
Visit www.lubegard.com/automotive/trans_seal-e-zee.html to view product demonstration videos.
17
ENGINE PRODUCTS
LUBEGARD® BIO/TECH
ENGINE OIL PROTECTANT
10 oz. PART # 30902
15 oz. PART # 30901
• Saves oil and fuel
• Optimizes engine horsepower and performance
• Protects and extends oil life up to 30%
• Improves fuel economy by reducing friction in your engine
• Reduces wear on metal components, thus increasing part life
• Improves anti-friction and anti-wear properties of ALL major oil brands to
meet requirements of ALL vehicles, including older and high performance
models
• Eliminates lifter and other objectionable noise on start-up, especially in
cold weather
• Ensures smoother running engines
• Reduces hot engine oil temperatures
• Blends with all motor oils currently produced, including API; SL, SD, SM,
SJ, SJ/EC, CG- 4, CH-4, SE, SF, SG, SI, CC, CD, CE and CF motor oils
• Helps reduce smoking by restoring flexibility to valve stem seals for
improved sealing, also providing outstanding upper cylinder lubricity as it
frees up sticking rings
• Inhibits oxidation and extends engine oil life
• Also use to extend the life of small 4 cycle engines such as; lawn
maintenance equipment, motorcycles, snow mobiles, generators, etc.
LUBEGARD® IMPROVES
UNTREATED MOTOR OIL BY 29%
The motor oil with the addition of Bio-Tech
Engine Protectant increased the oxidative
stability of the untreated motor oil from 248
minutes to 349 minutes. This improvement
in oxidative stability (29% improvement over
untreated motor oil) is far greater than any
of the other tested additives.
18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Falex Pin and Vee Block Test
Pictured are
steel pins from a
Falex Pin and
Vee Block test
simulating start
up conditions in
motor oil. The
Falex Pin and
Vee Block test
measures the
sliding friction
and wear of a
round metal
cylinder on flat
metal block
surfaces. Sliding
friction is the
major type of friction and wear in engines. The test
pictured was run only for analysis of friction and wear of
individual oils with and without LUBEGARD®. International Lubricants, Inc. does not compare, endorse, or
advise comparison of any brands of motor oil on the
basis of these tests.
All trademarks are owned by their respective companies.
ENGINE PRODUCTS
UNSURPASSED BIO-SYNTHETIC PROTECTION!
Here’s what Swissmotor found
during their independent
research on LUBEGARD Bio-Tech
Engine Oil Protectant:
“If one considers how many millions
[of dollars] are invested in
development projects by vehicle
manufacturers to increase engine
power and at the same reduce fuel
consumption, then compares that
amount to the ridiculously low cost
of adding LUBEGARD, one can only
shake one’s head in disbelief.
Especially since LUBEGARDalso
significantly prolongs the operating
life of any mechanism.“
Here’s what Lubegard BIO/TECH ENGINE
OIL PROTECTANT does:
• Reduces friction loss in the motor by up to
29% (saving fuel)
• Provides outstanding cold start properties
through polar behavior
• Improves oxidation stability (the main
factor in oil aging)
• Lowers oil consumption (especially with
long-life oils)
• Reduces wear by up to 70%
• Lowers the oil temperature
• Improves oil’s compressive strength
• Excellent for supercharged or highperformance engines (tuning)
• Audibly and significantly reduces the
noises that arise through inner friction
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® ENGINE FLUSH
Use Before Changing Oil In Gas Or Diesel Engines;
For use with or without flushing equipment
• Cleans gums, varnishes and deposits
• Properly prepares engine for fresh oil
• Frees sticky valves and lifters
• Improves oil circulation
• Will not harm seals and gaskets
• Does not contain harmful solvents
PART # 98901
PART # 95030
Also available in a flush
and protect pack
All trademarks are owned by their respective companies.
19
ENGINE PRODUCTS
LUBEGARD® FREE-EZE™
RUSTED CYLINDER TREATMENT
• Frees up seized/frozen engine cylinders
• Removes rust where access is limited
• Lubricates critical moving parts
• Ideal fogging oil for extended storage of vehicle engines
• For use in diesel and gas engines
PART # 30990
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® 2 CYCLE OIL
• Helps engines run cooler by reducing friction and wear
• Excellent rust and corrosion protection
• Ashless formulation prevents plug fouling, port clogging
and ring sticking
• Provides optimum thermal
and oxidative stability
• Reduces fuel consumption
• Prevents piston and cylinder wall scuffing
• Smoother idling at low RPM's
• Cleaner burning
• Enhances combustion efficiency with minimum deposits
• Eliminates scuffing
• Lowers treat rates
LUBEGARD 2 CYCLE Oil is a high performance 2-cycle oil that contains Liquid Wax
Ester (LXE) Technology. Being a premium oil, it is designed as a high temperature
lubricant to reduce friction, heat and wear and it also minimizes carbon deposits and
contains a no-ash oil formula that reduces spark plug fouling.
LUBEGARD 2-cycle Engine Oil allows for longer spark plug life and prevents preignition problems. It helps prevent rust, wear, corrosion, exhaust port plugging, ring
sticking and other oil and fuel deposits.
PART # 12932
(32 oz)
20
PART # 12944
(2.6 oz)
APPLICATIONS:
• All two cycle engines (Where oil is mixed with fuel).
• Commercial Equipment: Lawn mowers, weeders, snow blowers, chain saws,
sprayers, portable generators, etc.
• Recreational equipment: Motorcycles, outboard motors, mopeds, snowmobiles,
motor scooters, etc.
• Compatible with all 2-cycle injection lube systems
All trademarks are owned by their respective companies.
GEAR PRODUCTS
LUBEGARD® LIMITED SLIP SUPPLEMENT
• Eliminates differential chatter and other noises, (squeals,
groans, etc.)
• Universally works in all makes and models with limited slip
differentials including Ford, Chrysler, and GM
• Reduces differential temperatures
• Extends clutch pack and equipment life
• Inhibits rust and corrosion
• Safe for yellow metals
PART # 31904
PART # 31920
Also available in a
retail clamshell pack.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® GEAR FLUID SUPPLEMENT
FOR USE IN ALL MANUAL TRANSMISSIONS, TRANSAXLES AND
FINAL DRIVES THAT REQUIRE GEAR OIL
• Lowers temperature and extends fluid life
• Improves heat transfer from the fluid to the case wall and out the
gear box
• Improves gas mileage by reducing drivetrain power loss
• Improves all cold weather stiffness
• Improves all synchromesh transmission shifting characteristics
• Reduces tooth drag and absorbs shock loads, thus improving the
life of all gear units
• Lowers friction on bearings and gears with high wiping stresses,
especially hypoid gears
• Minimizes oxidation and varnish deposits
• Suppresses lubricant foaming
• Safe for new MTF Fluids
PART # 30903
21
POWER STEERING SYSTEM
LUBEGARD® POWER STEERING
FLUID PROTECTANT
• Eliminates power steering noises and
whines
• Improves power steering system
performance
• Eliminates rack and pinion steering
stiffness
• Saves time, space and money $$$
• Converts power steering fluid to
Honda® power steering fluid
• Frees sticky turbines and pumps
• Extends system and fluid life
• Reduces wear, thus extending the life
of the power steering system
• Increases responsiveness
• Eliminates stiffness on cold mornings
• Prevents thermal and oxidative
breakdown
• Safe for seals and hoses
PART # 20404
More Testimonials
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
During routine maintenance, we use LUBEGARD Power Steering
Supplement on rack and pinions. I used it on my own 86 Ford Taurus two
years ago and it still works great!
- George Rakes, Certified Transmission
My mother has a 1979 Dodge St. Regis- 125,000 miles on the odometer. She
was told that she needed a new power steering pump and all the things that
goes with it. An expensive suggestion. I purchased two of the LUBEGARD
Power Steering Protectants and the rest in power steering fluid. I flushed
the old system out, added the new fluid. My mother thinks I replaced the whole
steering system. It is actually that good! I’m a shade tree mechanic, but I
know what works and your product does!
- Jimmy Galloway
LUBEGARD®
POWER STEERING FLUID
22
PART # 20902
(32 oz)
PART # 20910
(10 oz)
• Compatible with all power and power-assisted steering
units, including Honda® applications that require power
steering fluid
• Extends life of steering system
• Eliminates power steering noises and whines
• Eliminates rack and pinion steering stiffness
• Efficient in hot and cold weather
• Cleans and frees sticky turbines and pumps
• Provides excellent rust and corrosion protection
• Inhibits fluid foaming and oxidation
• Safe for seals and hoses
All trademarks are owned by their respective companies.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
POWER STEERING SYSTEM
WHY FLUSH?
Power steering systems are
generally only noticed when
something has gone wrong!
This system is one of the
simplest to maintain and is
also the most frequent
complaint from a customer
with their vehicle. A power
steering system is generally
subjected to harsh
temperatures leading to fluid
deterioration over time.
Through constant use and
high operating pressures,
other types of wear
materials are also
generated that degrade the
system.
The result of this pressure
and heat is fluid break
down, hose deterioration,
contamination, loss of
lubricating properties, and
varnish deposits. Periodic
maintenance of this system
is vital to its longevity.
Flushing this system and
recharging it with new fluid
and adding LUBEGARD
Power Steering Fluid
Protectant is the best
assurance you can have for
extended optimum power
steering performance by
allowing the fluid to run
through the system
effortlessly, providing the
driver responsive and safe
control.
LUBEGARD®
POWER STEERING FLUSH
• Safely removes deposits and impurities
• Prepares system for new fluid
• Conditions and revitalizes seals and
components
• Deters internal power steering fluid
leakage from developing
• May postpone or eliminate the need to
replace power steering components
• Cleans, conditions and prepares the entire
system for replacement of worn
components
PART # 95040
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
POWER STEERING
PERFORMANCE PACK
For use with or without a
flush machine.
This Flush Pack includes;
1) LUBEGARD Power Steering
Flush Concentrate (#95040)
2) LUBEGARD Power Steering
Protectant (#20404).
Contains same benefits as
LUBEGARD Power Steering
Flush and LUBEGARD Power
Steering Protectant
PART # 98404
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® POWER STEERING
2-STEP SYSTEM FOR FLUSH MACHINES
LUBEGARD's Power Steering Flush & Fill fluid cleans out
unwanted contaminants such as sludge and varnish without
leaving harmful by-products or detergent residue and
provides new power steering fluid. Combined with the
LUBEGARD Power Steering Fluid Protectant your ensured a
enhanced and higher quality power steering fluid that contains
additional anti-wear, anti-corrosion and anti-friction
compounds.
This Flush Pack includes;
1) LUBEGARD Power Steering Flush & Fill Fluid
(# 20964 - 64 FL OZ)
2) LUBEGARD Power Steering Fluid Protectant (#20404)
PART # 97209
23
RADIATOR/COOLANT SYSTEM TREATMENTS
KOOL-IT® SUPREME
COOLANT TREATMENT
PART # 96001
• Protects all metals from electrolysis
• Provides unsurpassed cooling system
corrosion protection
• Enhances heat transfer and reduces
operating temperatures
• Reduces 5-7ºF with a 50/50 mixture
• Reduces up to 20ºF in straight water
• Prevents deposits and contamination
which lead to overheating
• Reduces water pump, impeller, and
intake manifold pitting
• Reduces wet-sleeve cylinder liner
cavitation erosion
• Corrects coolant pH balance
• Only coolant protectant with built-in pH
indicator (for use only in straight water
applications)
• Prevents warranty claims
• Extends coolant life up to five years
• Compatible with all types of antifreeze
• Inhibits ionic formation
nized by
More Testimonials
Results from 7,000 hour test;
A) Straight water with antifreeze (50/50)
B) Straight water with antifreeze (50/50) and KOOL-IT®
Note the separation of the water and antifreeze in bottle A.
This shows the contamination formed from rust and
silicates.
recog
the largest
radiator
r
an
m ufacture
I am very impressed with KOOL-IT. I was very skeptical about the
benefits, but I sincerely state that all the claims are indeed accurate. The
coolant system that I used the additive on had a voltage of .270 prior to
treatment and after two days of driving, the voltage had been brought
down to .026, with a reduced engine temperature across the spectrum of
approximately seven to ten degrees. - Michael Davis
KOOL-IT®
RADIATOR FLUSH
Quickly and safely, KOOL-IT
Radiator Flush circulates
through the cooling system to
remove scale, scum, oily
residue, rust, mineral
deposits and other
sediments, degradation and
combustion by-products from
the cooling system and
radiator of any vehicle.
PART # 95020
24
• Maximizes cooling system
efficiency
• Contains corrosion inhibitors
• Does not contain acids
• Safe and easy to use
• No neutralizers are required
• Safe for all cooling systems
including aluminum
radiators
PART # 98001
Also available in a flush and
protect pack
RADIATOR/COOLANT SYSTEM TREATMENTS
KOOL-IT® ELECTROLYSIS INDICATOR
• Diagnoses electrolysis instantly
• Works in place of expensive meters
• Place directly in radiator or reservoir if radiator access is limited
• Green indicator light tells you everything is operating normal
• Red indicator light tells you electrolysis is present
• Also use to troubleshoot and find the source of the stray current
Green LED (GOOD) - No
action is required. Levels of
electrolysis are in an acceptable
range. Add KOOL-IT Supreme
Radiator Treatment to protect the
system and extend the life of the
coolant.
Red LED (BAD)- Electrolysis (Stray current) is above acceptable
levels. Electrical system fault or bad ground is introducing destructive
levels of current to the cooling system with potential to damage the
radiator and heater core. Troubleshooting using the KOOL-IT
Electrolysis Indicator is required to find the source of the problem.
Once the correction has been made add KOOL-IT Supreme Radiator
Treatment to protect the system and extend the life of the coolant.
Photo courtesy of Modine Inc. ©2004
PART # 96000
Stray electrical current
can cause excessive
corrosion of metal
components.
Stray electrical current can
cause an electrochemical
reaction that produces voids in
tubes.
KOOL-IT Products solve 100% of Radiator Electrolysis Problems!
1. The chemical type occurs in all vehicles and is
a natural result when coolant (electrolyte solution)
flows through a system composed of different
types of metals (iron, aluminum, copper, or
brass). The coolant acts as the conductor through
which small amounts of current are transferred
between metals in the cooling system. Over the
passage of time this very small amount of current (less than 0.3
volts) can cause damage to metal surfaces (especially aluminum).
Given enough time, the damage will cause a leak to develop.
KOOL-IT Supreme Radiator Treatment (P/N: 96001) provides long
term protection from from the chemical electrolysis damage by
forming a passive, non-reactive, molecular surface film that
prevents damage to the metal.
2. The electrical type of electrolysis is much more
destructive and is caused by faulty electrical
components that deliver stray current (over 0.3
volts) through the cooling system. This may be
caused by a faulty ground or a shorted wire near
the cooling system. Stray current introduced into a
system this way can be strong enough to cause
severe damage very quickly. The only way to prevent damage from
this type of electrolysis is to mechanically correct this problem at the
source.
The Kool-It Electrolysis Indicator is the perfect easy to use
solution to determine if the electrical type of electrolysis is
present!
25
AIR CARE TREATMENT
KOOL-IT® EVAPORATOR &
HEATER FOAM CLEANER
• Quick and easy!
• Highly profitable service
• No equipment needed
• Customer friendly service
• Ideal for cars, trucks, vans and RV’s
• Repeat service opportunity
• Eliminates odors
• Lasts up to six months
• Improves air quality
• Leaves a clean, fresh scent
• Reduces allergens and contaminates
• Maximizes cooling system efficiency
Did you know...
PART # 96030
The air quality inside a vehicle can be up to 5 times worse
than outside? Contaminated air conditioning and heater/
evaporator cores can cause foul smelling, health threatening
mold and mildew deposits. Use KOOL-IT® super foaming
action to remove and neutralize the contaminates that live in
air conditioning and heater systems of modern cars and
trucks.
KOOL-IT® is released into the HVAC
system and its super foaming action flushes
out and and neutralizes unwanted
contaminants that live in air conditioning and
heater systems.
More Testimonials
I used KOOL-IT Evaporator & Heater Foam Cleaner on 2 cars. So far, the
odor hasn’t returned and both cars were extremely “musty” smelling. One
customer has complained to the BMW dealer for the last couple of years and
told her nothing could be done inexpensively to find a “cure” for this
problem. I would say so far I have a happy customer. I can relay this
information to the BMW tech groups because this has been a problem in
the “A/C” areas of the country.
- Paul “Doc” Provenza
Doc’s Bimmer Shop
26
BRAKE SYSTEMS
SQUEAK RELIEF®
BRAKE FINISHING TREATMENT
• Effective on all brake systems: disc, drum, ABS,
domestic and import
• Virtually eliminates customer brake squeal
comebacks by providing superior noise
suppression
• Will not void manufacturer's warranty
• Saves money
• Saves shop time
• Increases customer satisfaction
• Helps to quiet stubborn “problem brakes”
• No drying time required
• Waterproof
• Effectiveness tested from -100 to +1,000oF
• Prevents oxidation of rotors and drums
• Keeps rotors looking like new
• Helps to prevent brake surface rusting/oxidation
• Squeak Relief will not damage ABS sensors or
rubber components
• No ozone-depleting CFC's
Keep rotors looking
brand new!
PART # 90201
BEFORE SQUEAK RELIEF TREATMENT
Tiny irregularities in the rotor/drum
friction surfaces can cause vibration
and irritating brake noise.
PART # 90031
Does Not Effect
Braking Performance
or Manufacturer’s
Warranties
BEFORE AFTER
SQUEAK RELIEF SQUEAK RELIEF
TREATMENT TREATMENT
AFTER SQUEAK RELIEF TREATMENT
Microfine oxides fill and bond to the
irregularities, forming a composite,
metalized finish. This results in smooth, quiet
braking performance.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SQUEAK RELIEF®
UNIVERSAL BRAKE GREASE
PART # 91011
• Designed for ALL calipers
and brake hardware
• Will not melt and run out
• Lasts the life of the brakes
• Eliminates brake noise
• High and low temperature
operating conditions (-50°F
to 570°F)
• Will not wash out due to
weather or car washes
• Not effected by salt
environments
• Not effected by brake fluid
• Does not bleed or separate
• Compatible with elastomer
materials and seals
• Prevents calipers from
sticking
• Excellent as a dielectric
grease
• Excellent for drum brake
hardware and backing plates
27
FUEL SYSTEM
Meets ASTM
D-5598 10,000
mile Chrysler PFI
Test
Meets ATSM
D-5500 10,000 mile
BMW IVD Test
PRO II 9000® COMPLETE
FUEL SYSTEM CLEANER
Also for use in Diesels
The 2 can kit P/N 72400 does not require any
special tools and vaporizes the intake
vacuum hose instead of a dripping effect to
provide more uniform dispersion of the active
ingredient into the upper cylinders and valves.
The 2 in 1 aerosol intake cleaner also is a
throttle plate cleaner! The fuel injector/system
cleaner completes the service.
The 3 can kit P/N 72011 contains a separate
aerosol air intake throttle plate cleaner solely
to thoroughly clean the throttle body & intake.
It also contains a non-aerosol intake valve
combustion chamber cleaner that can be
applied with the hose adapter supplied with
every kit or the Pro II 9000 Intake Combustion
Cleaning Tool that has a dial flow regulator &
a hook to easily hang the tool & attached
product from. The fuel injector/system
cleaner completes the service.
• Patent pending technology exceeds
U.S. EPA Standards Section 211L of
the Clean Air Act for deposit control
additives.
• Polymeric fluidizers and dispersants/
detergents create synergistic
cleansing that washes away carbon
deposits
• Cleans and removes intake valve
deposits (IVD)
PART # 72011
PART # 72400
• Cleans and removes fuel
injector deposits (PFI)
• Cleans and removes
combustion chamber
deposits
• Cleans and keeps air intake
system throttle plate clean
• Ensures smooth and
dependable operation
• Ensures proper air flow
• Removes carbon deposits
• Helps eliminate hesitation,
rough idle, stumble, surge stall
and backfire
• Provides excellent anti-rust and
corrosion protection
• Highly effective synthetic
polymeric dispersants
• Removes throttle plate carbon
up to 100%
• Prevents further carbon deposit
formation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Powerful synthetic fluidizers and
dispersants/ detergents
• Cleans fuel injector deposits up to
100%
• One tank treatment
• Meets all ASTM D-5598 requirements.
PART # 72402
28
PRO II 9000 Complete Fuel System
Cleaner is safe for use on all fuel injected
and carbureted gasoline vehicles. One
treatment cleans air intake deposits, fuel
injector deposits and intake valve
deposits, ensuring lowered exhaust
emissions. Testing proved up to 27%
reduction in hydrocarbons and up to 58%
reduction in carbon monoxide.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PRO II 9000® Complete Fuel
System & Injector Cleaner
Also available:
the PRO II 9000
Intake/Combustion
Cleaning Tool
PART # 72000
MOTORCYCLE/BIKE
LUBEGARD®
ENGINE OIL PROTECTANT
• Increases heat transfer from inside
engine case through engine case wall for
reduced engine temperatures
• Suitable for use in all '84 and later FL,
• Reduces wear on all metal surfaces
FLT, FX, FXD, FXR, and FXST engines
Eliminates wear from cold start up
or any 4 cycle V-Twin engine application
• Better fuel mileage with extended oil life
with separate engine oil sump
• Contains no harmful additives such as
• For use with conventional or synthetic
chlorinated hydrocarbons or solid
motorcycle engine oil
lubricants like Teflon® or graphite
• Exclusive LXE® Technology for
• Not appropriate for applications that
enhanced heat reduction and extended
share an engine and primary sump
life for the engine
PART # 40910
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® PRIMARY CASE CHAIN PROTECTANT
PART # 40104
• Suitable for use in '84 and later
FL, FLT, FX, FXD, FXR and
FXST models with wet-type
diaphragm spring clutch
• For use with conventional or
synthetic motorcycle primary
chain case fluid
• Enhanced heat reduction,
reduced wear and extended life
for the primary chain
• Formulated to prevent clutch chatter,
shudder and slippage while maintaining the
proper coefficient of friction for long life and
proper clutch operation.
• Improves shift quality
• Increases heat transfer from inside primary
case through primary unit case wall.
• For use in separate primary sumps
LUBEGARD®
CHAIN LUBE
FOR BIKES
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
COOLANT TREATMENT
For water cooled
motorcycles and ATV’s.
PART # 40820
• Protects aluminum from electrolysis
• Reduces operating temperatures
• Provides 5 year corrosion protection
• Prevents hard-water scales and
deposits
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PART # 40744
• Repels dirt. Saves drive
trains from expensive
replacement
• Biodegradable and
aquatically non-toxic.
• Plant-based petroleumfree formulation
• Proprietary LXE® (Liquid
Wax Ester) Technology
has a natural polarity that
strongly attaches to metal
surfaces providing superior
lubrication and wear
prevention
LUBEGARD®
TRANSMISSION PROTECTANT
• Suitable for use in all 4 and 5 speed
FL, FLT, FX, FXD and FXR
Transmissions or any separate
sump transmission applications
• Exclusive LXE® Technology for
enhanced heat reduction and
extended transmission fluid life
PART # 40602
• Improves shift quality
• Reduces drive train power loss
• Reduces wear on gears and bearings
• Increases heat transfer from inside
case through unit case wall
29
LUBEGARD®
HEAVY DUTY
POWER TRANSFER
PROTECTANT
ENHANCES ALL
AUTOMATIC TRANSMISSION
POWER STEERING AND
HYDRAULIC FLUIDS
PART # 45142
• Extends component and
fluid life
• Reduces friction and wear
• Reduces operating
temperatures
• Prevents fluid oxidation
and foaming
• Optimizes system
performance
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HEAVY DUTY
LUBEGARD®
HEAVY DUTY
GEAR PROTECTANT
ENHANCES ALL GEAR OILS
USED IN MANUAL
TRANSMISSIONS,
TRANSAXLES, OR FINAL
DRIVES
PART # 70944
• Extends component and
oil life
• Increases horsepower
• Reduces friction and wear
on gears and bearings
• Reduces operating
temperatures
• Improves manual
transmission shifting
• Reduces tooth drag and
absorbs shock loads
• Optimizes system
performance
LUBEGARD®
HEAVY DUTY
ENGINE
PROTECTANT
FOR GAS AND DIESEL ENGINES
PART # 30916
30
• Boosts the engine oil
additive package,
extending oil life and fuel
consumption
• Increases fuel mileage,
horsepower, and
performance
• Reduces friction and wear
so engines last longer
and run smoother
• Eliminates noises such
as engine valve tap
• Synthetic LXE®
Technology dramatically
reduces temperatures and
oxidation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
HEAVY DUTY
COOLANT
TREATMENT
ENHANCES ALL COOLANTS
IN DIESEL ENGINES
PART # 96430
• Protects wet sleeve
cylinder liners from
cavitation erosion
• Prevents buildup of scales
and deposits that cause
overheating
• Provides 100% protection
from corrosion and
electrolysis
• Significantly extends life
of water pump impellors
and seals
Comes with 2 nitrite and freeze point
test strips for checking coolant
before and after treatment.
LUBEGARD® MARINE
4 CYCLE ENGINE OIL
TREATMENT
PART # 46086
• Restores and rejuvenates all
seals and gaskets
• Softens and removes internal
deposits from years of usage and
storage
• Helps engines run cooler by
reducing friction and wear
• Offers unequalled corrosion
protection
• Inhibits oxidation and extends
engine life
• Prevents piston and cylinder wall
scuffing, as well as ring sticking
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MARINE
LUBEGARD®
MARINE 2 CYCLE
OIL & ENGINE
TREATMENT
• Restores engine power
and compression
• Prevents plug fouling and
port clogging
• Rejuvenates internal seals
and gaskets
PART # 46910
LUBEGARD®
MARINE POWER
TRANSFER FLUID
• Increases responsiveness and
eliminates stiffness
• Frees sticky turbines, pumps,
and valvebodies
• For use in inboard/outboard
with powersteering
PART # 45909
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
MARINE GEAR OIL
SUPPLEMENT
• Reduces drive power loss
• Reduces tooth drag
• Absorbs shock load
• Minimizes oxidation and
varnish deposits
• Suppresses lubricant
foaming
PART # 47903
LUBEGARD®
MARINE CYLINDER
RESCUE
• Offers superior film
retention
• Shields engines from dry
starts
• Rescues flash-rusted
engines and other
mechanisms
PART # 48990
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
ALL PURPOSE
MARINE LUBRICANT
PART # 49448
• Lasts 10 times longer than the
leading brand!
• Aquatically non-toxic and
biodegradable
• Non-aerosol, non-flammable
• 100% environmentally friendly
• 100% non-toxic
• 100% aquatically non-toxic
• It’s non-flammable, non-aerosol
and offers outstanding corrosion
protection
31
SMALL EQUIPMENT
LUBEGARD®
POWER SHIELD
2 CYCLE OIL & RE-CONDITIONER
PART #86020 PART # 86604
• LXE Technology softens old carbon
deposits from years of use and
storage, allowing elimination through
normal combustion
• Reduces wear and extends system
life
• Offers one of the cleanest burns
available. Cleaner burns result in
better idling at lower RPMs and
reduced fuel consumption
• LXE provides optimum thermal
stability and will not readily break
down, even under the most extreme
heat and pressure
• Rejuvenates engine gaskets and
seals
• Provides outstanding rust and
corrosion protection.
• Compatible with all 2 cycle
applications, air or water cooled
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD®
POWER SHIELD ANYTHING
& EVERYTHING LUBE
The name says it all!
LUBEGARD® Power Shield®
Anything and Everything Lube can
be used for an infinite amount of
applications, at work, play, or
around the house. It is formulated
with our patented LXE®
technology to provide a
biodegradable, all purpose
lubricant, that will not cause harm
to the environment, people, pets,
or plants. This unique product can
be used to instantly stop squeaks,
free sticking mechanisms, loosen
rusted or stuck fasteners, and
lubricate countless other
applications.
• Non-aerosol
• Non-flammable
• Outstanding rust and
corrosion protection
PART #88000
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LUBEGARD® POWER SHIELD
BAR AND CHAIN OIL
LUBEGARD® Power Shield® Bar
and Chain Oil makes any bar and
chain run cooler...and longer with
less lubricant. Less heat equals
less wear, and less wear equals
longer life.
It is 100% biodegradable. Since
it’s not a petroleum-based
lubricant, you can maintain trees
and brush on your property, without
being worried about leaving biohazardous waste behind. When
used on bar and chains, sacrificial
32
PART #87084
oils leave a tremendous amount of
waste behind. Now you don’t have
to choose between your equipment
and the environment— protect them
both!
• Extends bar and chain life
• Keeps teeth sharper longer
• Unmatched friction reduction under
extreme heat
• Offers outstanding rust and
corrosion protection
• Non-toxic and aquatically non-toxic
• Non-flammable
Description
Part
No.
Unit
Size
UPC
Code
Case Unit
QNT L (“)
PRODUCT SPECS
Unit
W (“)
Unit
H (“)
AUTOMATIC TRANSMISSION PROTECTION
Unit
Weight
Case Case
L (“) W (“)
Case
H (“)
Case QNT QNT
Weight per/Tier Pallet
LUBEGARD Automatic
Transmission Fluid Protectant
60902 10oz 0 83137 60902 2 12 2.0 2.938 7.313
50902 32oz 0 83137 50902 8 6 2.188 4.313 9.375
0.70lb
2.10lb
8.250 9.250 8.188 9.0lb 25cs 150
6.938 9.0 10.375 12.7lb 25cs 150
LUBEGARD ATF Flush
& Protect Pack
98602
1.938 5.875 7.313
1.40lb
6.125 12.0
LUBEGARD Platinum
Universal ATF Protectant
63010 10oz 0 83137 63010 4 12 1.875 2.938 7.188
63016 15oz 0 83137 63016 3 12 2.125 3.313 8.250
63032 32oz 0 83137 63032 3 6 2.188 4.313 9.375
0.65lb
1.0lb
2.10lb
7.875 9.0 7.938 8.45lb 25cs 150
9.188 10.375 9.063 12.9lb 16cs 80
6.938 9
10.375 12.7lb 25cs 150
LUBEGARD Platinum Universal
ATF Flush & Protect Pack
98010
1.40lb
6.125 12.0
8.0
9.0lb
20cs 120
LUBEGARD Highly Friction
Modified ATF Supplement
61910 10oz 0 83137 61910 9 12
2.0
2.938 7.313
0.70lb
8.250 9.25
8.188
9.0lb
25cs 150
LUBEGARD M-V ATF
Supplement
62005 10oz 0 83137 62005 1 12
2.0
2.938 7.313
0.70lb
8.250 9.25
8.188
9.0lb
25cs 150
LUBEGARD Universal
CVT Fluid
67032 32oz 0 83137 67032 2 6 2.188 4.313 9.375
67005 5gal N/A
NA 12.250 14.0 14.750
2.10lb
41.0lb
6.938
NA
9.0
NA
10.375 12.7lb 25cs 150
NA
NA
NA NA
BTR ATF Conversion Formula
62911 10oz 0 83137 62911 5 12 1.875 2.938 7.188
0.65lb
7.875
9.0
7.938
8.45lb 25cs 150
LUBEGARD Transmission Flush 95001 10oz 0 83137 95001 1 12 1.875 2.938 7.188
0.70lb
7.875
9.0
7.938
9.2lb
0 83137 19001 1 12 2.750 3.625 9.563
0 83137 19001 1 12 2.750 3.625 9.563
1.15lb
1.15lb
8.5 11.5 10.125 14.2lb 19cs 95
8.563 11.5 10.125 14.2lb 19cs 95
19250 16oz 0 83137 19250 3 12 4.688 4.688 3.688
1.05lb
10
14.25 8.125
13.2lb 12cs 72
Dr. Tranny Assemblee Goo (Blue) 19260 16oz 0 83137 19260 2 12 4.688 4.688 3.688
1.05lb
10
14.25 8.125
13.2lb 12cs 72
Dr. Tranny Transmission
Assembly Treatment
19420 8oz 0 83137 19420 0 12 2.500 2.500 4.688
0.55lb
8.125 10.375 5.625
6.75lb
NA
NA
Dr. Tranny Threadlocker (Red)
13250 .34oz 0 83137 13250 9 12 0.8125 3.750 5.625
0.05lb
4.188
.80lb
NA
NA
Dr. Tranny Instant Shudder Fixx (tube) 19610 2oz 0 83137 19610 5 24 1.125 6.0 2.063
Clamshell 19680 2oz 0 83137 19680 8 12 1.625 4.750 8.063
0.15lb
0.25lb
5.563 7.750 6.625
9.938 10.125 9.0
3.9lb 42cs 336
3.45lb 16cs 80
Dr. Tranny Power Kleen
19101 12oz 0 83137 19101 8 6
2.875 2.875 7.250
0.70lb
6.250 8.875 8.250
4.5lb
LUBEGARD/Seal-E-Zee Step 1
LUBEGARD/Seal-E-Zee Step 1
19500 7oz 0 83137 19500 9 12 2.188 2.250 5.625
19502 16oz 0 83137 19502 3 12 2.750 2.750 7.938
0.60lb
1.25lb
7.0 9.313 6.438
8.75 11.375 8.688
7.65lb 12cs 84
15.6lb 16cs 80
LUBEGARD/Seal-E-Zee Xtreme
Step 2
19501 7oz 0 83137 19501 6 12 2.188 2.250 5.625
0.60lb
7.0
9.313 6.438
7.65lb 12cs 84
LUBEGARD/Seal-E-Zee
Step 1 & Step 2 Pack
19522
1.30lb
14.0 9.938 6.813
15.9lb 12cs 72
LUBEGARD/Seal-E-Zee
Application Cones
GM5L40E Cone Set
19600 NA
19540 NA
0 83137 19600 6 12 9.125 11.500 8.625
0 83137 19540 7 12 9.125 11.500 8.625
2.10lb
2.10lb
15.5 23.13 13.75
NA
NA
NA
21.0lb 15cs 45
21.0lb 15cs 45
LUBEGARD/Seal-E-Zee Cone
Starter Kit (Comes with cones,
product, DVD, etc.)
19222 NA
0 83137 19222 0 NA 8.500 8.313 9.500
3.25lb
NA
LUBEGARD Bio-Tap Drilling
& Tapping Fluid
81915 15oz 0 83137 81915 8 12 2.188 3.375 8.500
81901 1gal N/A
4 6.125 6.125 11.813
1.05lb
7.20lb
9.250 10.313 9.375 13.0lb 16cs 80
12.500 12.50 12.75 29.80lb NA NA
LUBEGARD Premium
Universal Lubricant
61004 8oz 0 83137 61004 5 12 1.813 3.875 7.375
61016 16oz 0 83137 61016 8 6 1.938 4.0 10.313
0.55lb
1.0lb
6.625 11.25 8.25
7.0lb 24cs 144
5.750 8.875 11.188 6.50lb 30cs 120
LUBEGARD Lube’ n Loosen
61444 8oz 0 83137 61444 9 24 1.813 3.875 7.375
0.55lb
6.625 11.25
(2) 0 83137 98602 7 6
10oz
(2) 0 83137 98010 0 6
10oz
1.875 5.750 7.188
8
9.0lb
20cs 120
25cs 150
REBUILD ESSENTIALS
Dr. Tranny Kooler Kleen 3/8” Tip 19001
w/ Universal Tip 19100
Dr. Tranny Assemblee Goo (Green)
13.25oz
13.25oz
(2) 0 83137 19522 1 12 2.375 4.500 5.875
7oz
7.0
NA
6.813
NA
NA
30cs 180
NA
NA
UNIVERSAL LUBRICANTS
8.25
7.0lb
24cs 144
33
PRODUCT SPECS
Part
No.
Description
Unit
Size
UPC
Code
Case Unit
QNT L (“)
Unit
W (“)
Unit
H (“)
Unit
Weight
Case Case
L (“) W (“)
Case
H (“)
Case QNT QNT
Weight per/Tier Pallet
ENGINE & GEAR PROTECTION
LUBEGARD BIO-TECH
Engine Oil Protectant
30902 10oz 0 83137 30902 4 12 2.0 2.938 7.313
30901 15oz 0 83137 30901 7 12 2.25 3.375 8.25
40902 32oz 0 83137 40902 1 6 2.188 4.313 9.375
0.70lb
1.05lb
2.10lb
8.25 9.25 8.188 9.0lb 25cs 150
9.250 10.5
9.0
13.0lb 16cs 80
6.938 9.0 10.375 12.70lb 25cs 150
LUBEGARD Engine Flush
95030 15oz 0 83137 95030 1 12 2.125 3.313
8.25
1.0lb
9.188 10.375 9.063 12.55lb 16cs 80
LUBEGARD Engine Flush &
Protect Pack
98901
8.25
2.15lb
7.313 13.75
LUBEGARD Gear Fluid
Supplment
30903 8oz 0 83137 30903 9 12 1.875 2.938 7.188
70901 32oz 0 83137 70901 5 6 2.188 4.313 9.375
0.60lb
2.10lb
8.25 9.25 8.188 7.85lb 25cs 150
6.938 9.0 10.375 12.70lb 25cs 150
LUBEGARD Premium
2 Cycle Engine Oil
12944 2.6oz 0 83137 12944 8 12 1.125 2.500 5.563
12932 32oz 0 83137 12932 5 6 2.188 4.313 9.375
0.25lb
2.10lb
5.563 7.750 6.625 2.95lb 42cs 294
6.938 9.0 10.375 12.70lb 25cs 125
31904 4oz 0 83137 31904 7 12 1.563 2.813 6.813
31920 4oz 0 83137 31920 7 12 1.625 4.750 8.063
0.25lb
0.35lb
5.563 7.750 6.625
9.938 10.125 9.0
30990 15oz 0 83137 30990 1 12 2.188 3.375 8.500
1.0lb
9.25 10.313 9.375 10.10lb 16cs 80
LUBEGARD Limited
Slip Supplement
(tube)
(clamshell)
LUBEGARD Free-Eze
(2) 0 83137 98901 1 6
15oz
6.750 2.313
9.25
13.0lb 18cs 90
3.60lb 42cs 336
4.95lb 16cs 80
POWER STEERING PROTECTION
LUBEGARD Universal Power
Steering Fluid Protectant
20404 4oz 0 83137 20404 6 12 1.250 2.563 5.688
0.30lb
7.5
LUBEGARD Universal Power
Steering Fluid
20910 10oz 0 83137 20910 2 12 1.875 2.938 7.188
20902 32oz 0 83137 20902 7 6 2.188 4.313 9.375
0.65lb
2.10lb
7.875
6.938
8.25
3.95lb
7.625 22.250 9.75
24.45lb 10cs 50
5.5
0.30lb
7.500 5.500 6.375
3.55lb 42cs 294
4.938 1.813 5.688
0.65lb
5.375 7.625 6.250
4.0lb
96001 16oz 0 83137 96001 0 12 2.125 3.313 8.25
96808 16oz 0 83137 96808 5 12 2.125 3.313 8.25
96032 32oz 0 83137 96032 4 6 2.188 4.313 9.375
1.2lb
1.2lb
2.1lb
9.188 10.375 9.063 14.50lb 16cs 80
9.188 10.375 9.063 14.50lb 16cs 80
6.938 9.0 10.375 12.70lb 25cs 150
KOOL-IT Radiator Flush
95020 16oz 0 83137 95020 2 12 2.125 3.313 8.250
95732 32oz N/A
6 2.188 4.313 9.375
95100 1gal N/A
4 6.125 6.125 11.813
1.2lb
2.10lb
7.20lb
9.188 10.375 9.063 14.50lb 16cs 80
6.938 9.0 10.375 12.7lb 25cs 150
12.500 12.5 12.75 29.80lb NA NA
KOOL-IT Radiator
Flush & Protect Pack
98001
2.40lb
7.313 13.750 9.250
KOOL-IT Electrolysis Indicator
96000 NA
0.30lb
6.938 9.813 13.063 4.30lb 30cs 150
KOOL-IT Evaporator & Heater
Foam Cleaner
96030 6oz 0 83137 96030 0 6
2.375 3.188 7.375
0.65lb
6.813 7.750 8.313
90031 2oz 0 83137 90031 3 12 2.625 2.625 5.375
90201 11.25oz 0 83137 90201 0 6 2.125 2.125 5.625
.30lb
1.0lb
7.0
6.0
.05lb
NA
LUBEGARD Power Steering
97209 1-4oz 0 83137 97209 9 6
Flush and Protect 2-Step System
1-64oz
LUBEGARD Power Steering Flush
95040 4oz 0 83137 95040 0 12
LUBEGARD Power Steering
Flush & Protect Pack
98404
(2) 0 83137 98404 7 6
4oz
2.125 3.313
2.5
1.125
5.500 6.375
9.0
9.0
3.90lb 42cs 294
7.938 8.45lb 25cs 125
10.375 12.70lb 25cs 150
42cs 294
COOLING/ RADIATOR PROTECTION
KOOL-IT Supreme Coolant Treatment
(CANADA ONLY)
(2) 0 83137 98001 8 6
16oz
2.250 6.688
8.25
0 83137 96000 3 12 1.563 3.188 12.188
15.0lb 18cs 90
4.0lb
36cs 216
BRAKE SYSTEMS
SQUEAK RELIEF Brake
Finishing Treatment
34
SQUEAK RELIEF Caliper Grease 91011 .5oz N/A
Pillow Packs
NA
.20
4
2.5
9.25 6.500 3.90lb 30cs 210
8.375 10.250 6.50lb 35cs 140
NA
NA
NA
0
Description
Part
No.
Unit
Size
UPC
Code
Case Unit
QNT L (“)
Unit
W (“)
PRODUCT SPECS
Unit
H (“)
Unit
Weight
Case Case
L (“) W (“)
Case
H (“)
Case QNT QNT
Weight per/Tier Pallet
FUEL SYSTEM TREATMENTS
PRO II 9000 Air & Fuel
System Tune-Up (3 Can Kit)
72011
NA
0 83137 72011 9 4
2.938 7.875 7.625
2.95lb
8.375 11.75 8.563 12.35lb
PRO II 9000 Complete Fuel
System Cleaner (2 Can Kit)
72400 NA
0 83137 72400 1 6
2.875 5.625 9.250
2.10lb
9.125 11.438 10.0
PRO II 9000 Intake/Combustion
Cleaning Tool
72000 NA
0 83137 72000 3 NA 8.688
9.25
NA
NA
NA
NA
13.55lb 20cs 120
5.25
1.35lb
NA
NA
NA
NA
LUBEGARD FOR V-TWIN
Primary Case Chain Protectant
40104 4oz 0 83137 40104 9 12 1.250 2.563 5.688
0.30lb
7.5
5.500 6.375
3.90lb 42cs 294
LUBEGARD FOR V-TWIN
Transmission Protectant
40602 4oz 0 83137 40602 0 12 1.250 2.563 5.688
0.30lb
7.5
5.500 6.375
3.90lb 42cs 294
LUBEGARD Coolant Treatment
for Motorcycles
40820 4oz 0 83137 40820 8 12 1.250 2.563 5.688
0.30lb
7.5
5.500 6.375
3.55lb 42cs 294
LUBEGARD FOR V-TWIN
Engine Oil Protectant
40910 10oz 0 83137 40910 6 12 1.875 2.938 7.188
0.70lb
8.25 9.250 8.188
9.0lb
25cs 150
LUBEGARD Premium
Universal Chain Lubricant
40744 8oz 0 83137 40744 7 12 1.813 3.875 7.375
0.55lb
6.625 11.25 8.250
7.0lb
24cs 144
LUBEGARD Heavy Duty
Engine Protectant
30916 32 oz 0 83137 30916 1 6
2.188 4.313 9.375
2.10lb
6.938
9.0
10.375 12.7lb 25cs 150
LUBEGARD Heavy Duty
Power Transfer Protectant
45142 32oz 0 83137 45142 6 6
2.188 4.313 9.375
2.10lb
6.938
9.0
10.375 12.7lb 25cs 150
LUBEGARD Heavy Duty
Gear Protectant
70944 32oz 0 83137 70944 2 6
2.188 4.313 9.375
2.10lb
6.938
9.0
10.375 12.7lb 25cs 150
LUBEGARD Heavy Duty
Coolant Treatment
96430 32oz 0 83137 96430 8 6
2.188 4.313 9.375
2.10lb
6.938
9.0
10.375 12.7lb 25cs 150
LUBEGARD MARINE
Power Transfer Fluid
45909 10oz 0 83137 45909 5 12 1.875 2.938 7.188
0.65lb
7.875
9.0
7.938
8.45lb 25cs 150
LUBEGARD MARINE
4 Cycle Engine Oil Treatment
46086 10oz 0 83137 46086 2 12 1.875 2.938 7.188
0.65lb
7.875
9.0
7.938
8.45lb 25cs 150
LUBEGARD MARINE
2 Cycle Engine Oil Treatment
46910 10oz 0 83137 46910 0 12 1.875 2.938 7.188
0.65lb
7.875
9.0
7.938
8.45lb 25cs 150
LUBEGARD MARINE
Gear Oil Supplement
47903 10oz 0 83137 47903 1 12 1.875 2.938 7.188
0.65lb
7.875
9.0
7.938
8.45lb 25cs 150
LUBEGARD MARINE
Cylinder Rescue
48990 8oz 0 83137 48990 0 12 1.813 3.875 7.375
0.55lb
6.625 11.25 8.250
7.0lb
24cs 144
LUBEGARD MARINE
All Purpose Marine Lubricant
49448 8oz 0 83137 49448 5 12 1.813 3.875 7.375
0.55lb
6.625 11.25 8.250
7.0lb
24cs 144
LUBEGARD POWER SHIELD
2 Cycle Oil & Reconditioner
86604 2.6oz 0 83137 86604 6 12 2.313 1.125 2.313
86020 8oz 0 83137 86020 4 12 1.813 3.875 7.375
.25lb
.55lb
5.563 7.75 6.625
6.625 11.25 8.250
2.95lb 42cs 294
7.0lb 24cs 144
LUBEGARD POWER SHIELD
Bar & Chain Lubricant
87084 32oz 0 83137 87084 5 6
2.188 4.313 9.375
2.10lb
6.938
LUBEGARD POWER SHIELD
Anything & Everything Lube
88000 8oz 0 83137 88000 4 12 1.813 3.875 7.375
.55lb
6.625 11.250 8.250
MOTORCYCLE/ BIKE PRODUCTS
HEAVY DUTY
MARINE
POWER SHIELD FOR SMALL EQUIPMENT
9.0
10.375 12.7lb 25cs 150
7.0lb
24cs 144
INDUSTRIAL LUBRICANTS For a complete line of industrial product solutions, visit www.Lubegard.com
LUBEGARD Hydraulic Fluid
Supplement
60901 32oz 0 83137 60901 8 6 2.188 4.313 9.375
60903 5gal N/A
NA 12.250 14.0 14.750
2.1lb
41.0lb
6.938
NA
9.0
NA
10.375 12.7lb 25cs 150
NA
NA
NA NA
LUBEGARD Heavy Duty
Cutting Oil
80901 1gal N/A
7.20lb
12.5
12.5
12.75
4
6.125 6.125 11.813
29.8lb
NA
NA
35

Similar documents

Open

Open whale oil per year was used in lubricants alone. In 1972, the Endangered Species Act outlawed the killing of whales and the use of whale oil. Since no suitable replacement for whale oil was availab...

More information