tigo wap

Handheld
Tigo Internet
Settings
WAP, GPRS & 3G
Tigo Internet (WAP) settings
Nokia
03
Sony Ericsson
27
Motorola
33
Samsung
36
LG
47
Siemens
50
Other phones
53
Apple Iphone
Alcatel
Htc
X-perial Window Mobile
Nec
Sharp
Palmtreo
3G Network Selection/settings
Nokia
Sony Ericsson
Samsung
LG
60
72
74
76
Internet 3G manual settings
Blackberry
Iphone
79
81
NOKIA WAP
SETTINGS
Tigo Internet
(WAP) settings
Nokia 7250i
1 > Go to main menu, select connectivity, Scroll and select GPRS
2 > On GPRS connection, select always on line or when needed
3 > Then scroll down and select, GPRS modem setting
4 > Then select active access point and chose access point 1 or any other and activate it.
5 > Then scroll down to edit active access point and select it.
6 > Then select alias for access point and edit it, tigowap.
7 > Then scroll down to GPRS access point select and edit, tigowap.
8 > Go back to main menu and select services
9 > Scroll and select settings then select connection setting.
10 > Select active service settings select any set and activate it.
11 > Scroll down to edit active service settings select it.
12 > Then select settings’ name and edit tigowap.
13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.
14 > Scroll down to session mode select it and select tempory
15 > Then scroll down to connection security and select off.
16 > Then scroll down to data bearer select it and choice GPRS.
17 > Scroll down to bearer setting and select it, Select GPRS access point edit it tigowap.
18 > Then scroll down to IP address and edit it (10.168.20.80)
19 > Then scroll down to authentication type select it and select normal
20 > Scroll down to login type select it and select automatic
21 > Then scroll down to user name and leave blank.
22 > Then scroll down to password and leave blank.
04
Nokia X6
1 > Go to menu Settings scroll down to connectivity2
2 > Network destinations > click Wap services tigo web > Option > edit > connection
name - tigo wap Data bearer - Packet Data
3 > Access Point Name - tigowap user name - blank password - blank Authentication
- Secure Home page - None Use access point - tigowap
4 > Go to option > Advanced settings set Network type - IPV4 phone IP address Automatic DNS address - Automatic Proxy Server Address - 10.168.20.80 Proxy
port number - 8080
05
Nokia N71
1 > At the main screen, press the button for the menu, scroll to Web and press the joystick
2 > At the Bookmarks Menu, press Options and scroll down to select Settings
3 > Select Default access point, press the joystick and press Yes to a pop-up message
4 > Select Options and select New access point with use default settings
5 > Select Options and select advanced settings
6 > Network type :automatic
7 > Go to Proxy server Address and enter 10.168.20.80
8 > Enter Proxy port number: 8080, press Back to return to previous menu
9 > Select Connection name, edit name :tigowap , press OK
10 > Select Data bearer: GPRS
11 > Enter Access point name: tigowap
12 > Enter User name: leave blank
13 > Enter Password: leave blank
14 > Select Authentication: Normal
15 > Enter Homepage: http://wap.tigo.co.tz
16 > Press Back till exit to Bookmark screen
17 > Press Options and Download to start surfing WAP
06
Nokia 3510 / 3650 / 5100
1 > On the main menu, select service
2 > Scroll to settings
3 > Select edit active service settings
4 > Key in tigowap as the setting name
5 > Key in http://wap.google.com as home page
6 > Scroll down to data bearer select and choice GPRS
7 > Then select active access point and choice access point 1 or any other and activate it.
8 > Then scroll down to edit active access point and select it.
9 > For IP address, key in 10.168.20.80
10 > Then scroll down to user name and leave blank.
11 > Then scroll down to password and leave blank.
12 > Press the back key to return to settings
13 > Select active service setting and activate
14 > Return back to services and select home Download the home page
07
Nokia 6310i / 6510 / 6610
1 > On the main menu, select services
2 > Scroll to settings
3 > Select free set (set I, 2, 3 ect)
4 > Select and rename it tigowap
5 > Scroll back and select connection settings
6 > Edit tigowap and Key in http://wap.google.com as home page
7 > Scroll down to data bearer select and choice GPRS
8 > Scroll down to access point and key in tigowap
9 > For IP address, key in 10.168.20.80
10 > Then scroll down to user name and leave blank.
11 > Then scroll down to password and leave blank
12 > Press the back key to return to settings
13 > Select active service setting and activate
14 > Return back to services and select home, Download the home page
08
Nokia N6800
1 > In main menu, go to connectivity
2 > Select GPRS
3 > On GPRS connection select when needed
4 > Press back and select GPRS modem settings
5 > Then select active access point and choice access point 1 or any other and activate it.
6 > Then scroll down to edit active access point and select it.
7 > Then select alias for access point and edit it, tigowap
8 > Go back to main menu and select services
9 > Scroll and select settings then select connection setting.
10 > Select active service settings select any set and activate it.
11 > Scroll down to edit active service settings and select it.
12 > Then select settings’ name and edit tigowap.
13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok
14 > Scroll down to bearer setting and select it, Select GPRS access point edit it tigowap.
15 > Then scroll down to IP address and edit it (10.168.20.80)
16 > Then scroll down to user name and leave blank.
17 > Then scroll down to password and leave blank
18 > Go back to active setting and press select
19 > Scroll to tigowap and press activate
20 > Scroll back to home page and select
09
Nokia 7210
1 > Go to main menu, select connectivity, Scroll and select GPRS
2 > On GPRS connection, select always on line or when needed
3 > Then scroll down and select, GPRS modem setting
4 > Then select active access point and chose access point 1 or any other and activate it.
5 > Then scroll down to edit active access point and select it.
6 > Then select alias for access point and edit it, tigowap.
7 > Then scroll down to GPRS access point select and edit, tigowap.
8 > Go back to main menu and select services
9 > Scroll and select settings then select connection setting.
10 > Select active service settings select any set and activate it.
11 > Scroll down to edit active service settings select it.
12 > Then select settings’ name and edit tigowap.
13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.
14 > Scroll down to session mode select it and select temporary
15 > Then scroll down to connection security and select off.
16 > Then scroll down to data bearer select it and choice GPRS.
17 > Scroll down to bearer setting and select it, Select GPRS access point edit it tigowap.
18 > Then scroll down to IP address and edit it (10.168.20.80)
19 > Scroll down to login type select it and select automatic
20 > Then scroll down to user name and leave blank.
21 > Then scroll down to password and leave blank.
10
Nokia 7650
1>
2>
3>
4>
Wap setting using GPRS
In the main menu, go to tools
Select setting and connection
Open access point, edit the existing access as follows:
Connection name: tigowap
Data bearer: GPRS
Access point name: tigowap
User name: blank
Prompt for password: no
Password: blank
Gateway IP address: 10.168.20.80
Home page: http://wap.google.com
5 > Scroll back to connection settings and select GPRS:
6 > At the access point type: tigowap
7 > Scroll back to main menu
8 > Scroll to services and open, select option
9 > Scroll to settings, open and change default access point to tigowap
10 > Return to the main menu and select services.
11 > On the bookmarks google will be highlighted
12 > Press options and download.
11
Nokia 6600
1 > In the main menu, go to tools
2 > Select setting and connection
3 > Open access point, select new access point
Choose use default settings
Connection name: tigowap
Data bearer: GPRS
Access point name: tigowap
User name: blank
Prompt for password: no
Password: blank
Gateway IP address: 10.168.20.80
Home page: http://wap.google.com
4 > Scroll back to connection settings and select GPRS:
5 > At the access point type: tigowap
6 > Scroll back to main menu
7 > Scroll to services and open, select option
8 > Scroll to settings, open and change default access point to tigowap
9 > Return to the main menu and select services.
10 > On the bookmarks google will be highlighted
11 > Press options and download.
12
Nokia 6100
1 > Go to main menu, select connectivity, Scroll and select GPRS
2 > On GPRS connection, select always on line or when needed
3 > Then scroll down and select, GPRS modem setting
4 > Then select active access point and chose access point 1 or any other and activate it.
5 > Then scroll down to edit active access point and select it.
6 > Then select alias for access point and edit it, tigowap.
7 > Then scroll down to GPRS access point select and edit, tigowap.
8 > Go back to main menu and select services
9 > Scroll and select settings then select connection setting.
10 > Select active service settings select any set and activate it.
11 > Scroll down to edit active service settings select it.
12 > Then select settings’ name and edit tigowap.
13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.
14 > Scroll down to session mode select it and select temporary
15 > Then scroll down to connection security and select off.
16 > Then scroll down to data bearer select it and choice GPRS.
17 > Scroll down to bearer setting and select it, Select GPRS access point edit it tigowap.
18 > Then scroll down to IP address and edit it (10.168.20.80)
19 > Then scroll down to authentication type select it and select normal
20 > Scroll down to login type select it and select automatic
21 > Then scroll down to user name and leave blank.
22 > Then scroll down to password and leave blank.
13
Nokia 8310
1 > On the main menu, select service
2 > Scroll to settings
3 > Select edit active service settings
4 > Key in tigowap as the setting name
5 > Key in http://wap.google.com as home page
6 > Scroll down to data bearer select and choice GPRS
7 > Then select active access point and choice access point 1 or any other and activate it.
8 > Then scroll down to edit active access point and select it.
9 > For IP address, key in 10.168.20.80
10 > Then scroll down to user name and leave blank.
11 > Then scroll down to password and leave blank.
12 > Press the back key to return to settings
13 > Select active service setting and activate
14 > Return back to services and select home.
14
Nokia 6680
1 > Go to the main menu and search for tools.
2 > From tools go to settings
3 > Select connection and choose access points
4 > Add a new access point OR edit any network name found.
5 > Connection name: tigo
6 > Data bearer: Packet Access point name: tigowap
7 > Username:
8 > Password:
9 > Prompt password:
10 > Authentication: normal
11 > Please under settings, Packet data connection: choose when needed.
12 > Also choose the Access point as: tigowap
13 > Also choose IPV4 as the network type. The IP to enter incase of any: 10.168.20.80
15
Nokia 9300 / 9500
1 > Go to the main menu and looks for tools.
2 > From tools option, go to the control panel.
3 > Create a new GPRS account name such as tigo
without using the existing accounts.
4 > From there, go to the next option and fill in the
access point name as tigowap
5 > Tab on the finish option and browse.
6 > These phones normally support WEB services
16
Nokia 2650 / 3200
1>
2>
3>
4>
5>
Menu then go to setting, selects connectivity
GPRS connection (always on line)
Back to connection settings Active service setting (tigowap)
Select edit active service setting (tigowap)
Home page (http://wap.yahoo.com)
Session mode (permanent)
Connection security (off)
Data bearer (GPRS)
Bearing setting (select > gprs access point >tigowap)
IP address 10.168.20.80
Authentication type (normal)
Login type (automatic)
User name leave blank
Password leave blank
17
NOKIA 6230 / 6820 / 6610i / 6260
1>
2>
3>
4>
4>
5>
Go to menu > setting > select connectivity then select GPRS
Then choice when needed or always online
Back to setting then select chat and my present setting
Then select active chat and present setting (tigowap)
Edit active chat and present setting write tigowap
Set home page: http://mms.tigowap.co.tz
User id: leave blank
Password: leave blank
6 > Back to setting then select connection setting the set name: tigowap
proxies: enable
primary proxy: 10.168.20.8080
secondary proxy: 10.168.20.8080
data bearer: gprs
Bearer setting: tigowap
GPRS access point: tigowap
Authentication types: normal
Login type: automatic
User name: leave blank
Password: leave blank
18
Nokia 6020
19
1 > Set a APN, go to the following directory:
Settings / connectivity / packet data / packet data settings / Go to Active access point:
choose one of the Access point (e.g.: Access point 1), and active it
2 > Go to edit active access point to set the APN
Alias for access point: set a name (e.g. tigowap)
Packet data access point: set the APN: tigowap
3 > Now you can see the directory Active access point have been changed.
4 > Set proxy, go to the following directory:
Settings / configuration settings / personal configuration settings
Then click option / add new / web
Account name: wap
Use preferred access point: no
Access point settings: proxy : enabled
Proxy address: 10.168.20.80
Proxy port: 8080
Data bearer: packet data
Bearer settings / packet data access point: tigowap
The other setting keep default, you can set a homepage also if you like.
5 > Go to main menu / Web / settings / configuration settings:
Configuration: Personal config.
Account: tigowap
Nokia 6030
20
1 > Set proxy, go to following directory
Setting / configuration setting / personal configuration setting / Then click add new web
Edit account name: tigowap
Homepage: http://wap.yahoo.com
Use preferred access point: NO
Acess point setting: proxy :Enable
Proxy address: 10.168.20.80
Proxy port: 8080
Data bearer: packet data
Bearrer setting / packet data access point: tigowap
2 > Go to main menu / web / setting / configuration setting:
Configuration: personal configuration
Account: tigowap
Nokia 7260
1>
2>
3>
4>
5>
6>
Go to menu > setting > then select connectivity
Then select GPRS (make a choice always online or when needed)
GPRS MODEM (Active access point) tigowap
Edit active access point (tigowap)
New alias (tigowap) press ok
Setting > Select > home page
change home page to http://wap.google.com
Bearer setting change GPRS access point to tigowap
change ip address to 10.168.20.80
In authentication type select: normal
In login type select: automatic
Ignore user name
Ignore password
21
Nokia 7200
1 > Go to menu / service connection setting /
active service setting (activate any set) / edit active service settings
enter details for the following parameters:
Setting‘s name: tigowap
Homepage: http://wap.yahoo.com
Proxies: enable
Primary proxy 10.168.20.80
Data bearer: GPRS
Bearer setting: GPRS access point: tigowap
Authentication type: normal
User name: blank
Password: blank
22
Nokia 6210 / 6230i / 6270
1>
2>
3>
4>
5>
Main menu / Settings
Scroll down to configuration
Scroll down to personal configuration settings and select
Go to option and add new
Select access point
account name: tigowap
data bearer: packet data
bearer settings: replace internet with gprs: rest remain normal
6 > Back to personal configuration settings select: tigowap
options: activate
7 > Go to options and add new: select web:
Account name: tigoweb
Homepage: http://wap.tigo.co.tz
Username: skip
Password: skip
Use preferred access point: no
Select access point settings: proxy enable
Proxy address: 10.168.20.80
Proxy port: 8080
Data bearer: packet data
Select bearer settings
Packet data access point: gprs
Authentication type: normal
User name: skip
Password: skip
8 > Click back to ‘use prefered access point’ and click ‘yes’ then go back to tigoweb
created and go t
23
Nokia E65/ 6630/ 3250/ N90/ N70
1>
2>
3>
4>
5>
6>
Main menu / Scroll to tools / settings / options and select open
Select settings / options and select open
Scroll down to connection / options and select open
Select access points / options and select open
Options scroll down to ‘new access point’
Scroll to the right and select ‘use default settings’
Connection name: tigowap
Data bearer: packet data
Access point name: tigowap
User name: skip
Prompt password: no
Password: skip
Authentication: normal
Homepage: http://wap.tigo.co.tz
7 > Options and scroll down to ‘advanced settings and select’
Network type: ipv4
Phone ip address: automatic
Dns address: automatic
Proxy serv. Address: 10.168.20.80
Proxy port number: 8080
8 > Select back to take you back
9 > Select back again to save.
24
Nokia X2
1>
2>
3>
4>
5>
6>
7>
8>
Go to menu > Connectivity > Packet Data
Set Packet data connection: when needed
Packet Data setting set Active access point: tigowap
Edit active access point
Access point Allias: tigowap
Packet data access pt: tigowap
Go back to menu > configuration
Scroll down to Personal settings
Click option then add new personal account
Account name: tigowap
Then go to access point settings
Bearer settings > Packet data access point: GPRS
Network type: IPv4
Authentication type: secure
user name: skip
password : skip
25
Nokia 3120
1 > Go to Menu / Service / Setting
2 > Connection setting / select Active service settings Choose any setting and active it.
3 > Go to Edit active service setting select it
Setting’s name: tigowap
Home page: http://wap.yahoo.com
Session mode: temporary
Connection security: off
Then select data bearer: choose GPRS
4 > Go to Bearer settings
Choose GPRS connection, then Always online
Go to GPRS access point and select tigowap
IP address: 10.168.20.80
Authentication type: Normal
Logon type: Automatic
Username: blank
Password: blank
5 > Tigo wap setting completed
26
SONY ERICSSON
WAPSETTINGS
Tigo Internet
(WAP) settings
Sony Ericsson W800 / W800i / K800i / K750 / K751 28
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
12 >
13 >
14 >
15 >
16 >
Main menu / Settings
Scroll right to connectivity
Scroll down to data account
Connectivity
Data accounts or data communication/gprs
New account / Name: tigowap
User name: skip
Password: skip
Preferred service: ps and cs or gsm and gprs
Sms access: circuit switched or gsm
Internet settings / internet profile / new profile
Name: tigowap
Connect using: scroll down and select tigo wap / tigo web and save.
Enter internet settings and select: tigowap
Click on more and select settings
Connect using / Use proxy: yes
Proxy address: 10.168.20.80
Port address: 8080
Username: skip
Password: skip
After go to more again and select advanced / change homepage / name / tigowap
Address: wap.tigo.co.tz for wap and saved
Select secondary account
Select ask before use and check: don’t ask me
Settings for java
Under that connect using: tigowap
Use proxy address: yes
Proxy address: 10.168.20.80
Port number: 8080
Save and now launch the browser
Sony Ericsson W950i / P990i
1 > Menu / Select settings / Select connectivity / Select internet settings
Select connect using / Select options / Select create new / Select ps data
Login name: tigowap
Login access point name: tigowap
Select save
2 > Go to tigowap access point
3 > Select options / Select edit / leave blank all fields except “proxy settings”
4 > Select proxy settings, press edit
Select proxy / press edit / press select on enable
5 > Select back
6 > Just select all servers: keep off
7 > Select proxies / Press edit / select http
Leave blank fields “username” and “password”
Enter proxy address: 10.168.20.80
Enter port: 8080
Select back / Press end key
8 > Menu / Select internet / Select options / Select advanced / Select connectivity
Select connect using / select tigowap
Select your default start page: http://wap.tigo.co.tz
9 > Push button end
29
Sony Ericsson XPERIA, Windows Mobile
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
12 >
13 >
Press Start / Home / Settings
Select the Connections tab
Select Connections
Select under My Work Connection “Add new modem connection”
Place in the fields: Connection name: tigowap
“Select Modem”: Cellular Line (GPRS) and click Next
In access point name drop: tigowap and click Next
Leave username, password and domain blank and Press End / Finish
Go to the Edit My Proxy Server
Select the box “This network connects to the Internet”
Select the box “This network uses a proxy server”
In place server: 10.168.20.80
Select Advanced and check the boxes HTTP and WAP Proxy 10.168.20.80
In HTTP Port: 8080
Press OK
30
Sony Ericsson K750i
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
Go to main menu / Connectivity and select Internet settings
Go to Internet profiles, select New profile and press Add
Enter Name: tigomms
Go to Connect using, and Add new account
Select Account type: GPRS data
Enter Name of New account :tigomms
Enter APN: tigowap
Enter User id: leave blank
Enter Password: leave blank
Press Save to save your account.
Screen will return to Data Accounts
Select your new profile then press save again
to go back to Internet Profiles.
Highlight your new profile “tigowap”
Press More then Settings.
Select Internet mode: WAP
Enter IP address: 10.168.20.80
Leave the rest as default and press Save.
31
Sony Ericsson C905
1 > Menu / Select settings / Select connectivity / Select internet settings
Select connect using / Select options / Select create new / Select PS data
Login name: tigowap
Login access point name: http://wap.tigo.co.tz
Select save
2 > Go to tigowap access point
3 > Select options / Select edit / leave blank all fields except “proxy settings”
4 > Select proxy settings, press edit
Select proxy / press edit / press select on “enable”
5 > Select back
6 > Just select all servers: keep off
7 > Select proxies / Press edit / select http
Leave blank fields “username” and “password”
Enter proxy address: 10.168.20.80
Enter port: 8080
Select back / Press end key
8 > Push button end
32
MOTOROLA
WAP SETTINGS
Tigo Internet
(WAP) settings
Motorola V3/l6/l7/v220/V400/V980 34
1 > Main menu / Webaccess / tools / settings
2 > Scroll down to web sessions
3 > Select web access / New entry
Name: tigowap
Homepage: wap.tigo.co.tz for wap
Service type1: “wap” for wap
Proxy 1: 10.168.20.80
Port 1: 8080 for web and wap
Domain: ignore
Service type 2: ignore
Proxy 2: ignore
Port 2: ignore
Domain 2: ignore
Dns 1: ignore
Dns 2: ignore
Timeout: ignore
Csd no1: ignore
User name1: ignore
Password: ignore
21speed (bps): 1440
Line type 1: modemcsd
no.2: ignore
User name 2: ignore
Password: ignore
Speed (bps) 2: ignore
Line type 2: ignore
Gprs apn: tigowap
User name: skip
Password: skip
4 > Select the middle menu and set as a default
and launch the browser to connect.
Motorola Z9, V9, V3xx
1>
2>
3>
4>
5>
6>
7>
8>
Press MENU
Search WAP and select (center button)
Search and select Configure WAP (center button)
Select New Entry and put the following values in the boxes:
Name (connection): tigowap
Homepage: http://wap.tigo.co.tz
Proxy 1: 10.168.20.80
Proxy Port: 8080
GPRS APN: tigowap
Select Done
Go to tigowap and then select WAP options
Select Default
Press Back to menu
35
Tigo Internet
(WAP) settings
SAMSUNG
WAP SETTINGS
Samsung D500/D700
1 > Menu / Browser / Scroll to profile settings and select
Profile name: tigowap
Homepage: wap.tigo.co.tz
Bearer: gprs only
Proxy: enable
2 > Select gprs settings
Ip address: 10.168.20.80
Port: 8080
Apn: tigowap
Login id: skip
Password: skip
3 > Select Menu / Browser
4 > Select current profile and launch to connect
37
Samsung S5230 Star
1 > Menu / Select Settings / Select network / Select Connections
2 > Select create / Select Set name
Login: tigowap
3 > Select Login Name
Login: tigowap
4 > Select Type of authorization: Normal
Leave Username fields & password blank
Select protocol: WAP
Select URL from Home
Login: http://wap.tigo.co.tz
5 > Select Gateway Address
Login: 10.168.20.80
Port: 8080
6 > Select Timeout
Enter time in seconds 120
7 > Select Save
8 > Press END key
38
Samsung X430
1 > Press Menu, go to Fun box and select WAP Browser
2 > Go to Settings and select Profile1 Info
Enter Profile Name: tigowap
Enter Homepage URL: http://wap.tigo.co.tz
Select Security: Non-Secure
Select Bearer: GPRS
Enter IP Address: 10.168.20.80
Enter Login Name: leave blank
Enter Password: leave blank
Enter APN: tigowap
3 > Press Back key to save and exit Settings
4 > Select Home to start your WAP surfing
39
Samsung D500
1 > Press Menu, go to Browser
2 > Go to WAP Profile and select Profile1 Info (or any other unused profile)
Enter Profile Name: tigowap
Enter Homepage URL: http://wap.tigo.co.tz
Select Bearer: GPRS
Enter IP Address: 10.168.20.80
Enter User Name: leave blank
Enter Password: leave blank
Enter Dial-up Number: leave blank
Select Data Call Type: ISDN
3 > Press Back key twice to save and exit Settings
4 > Select Home to start your WAP surfing
40
Samsung SGH - X830
1 > In idle mode, press browser / browser settings or settings / connection
2 > select browser profile
3 > press New to add a new connection and add a new profile.
If a profile has already been saved, press options and select Edit
4 > Specify profile name: tigowap
5 > Specify profile parameters: http://wap.tigo.co.tz
6 > Set IP Address: 10.168.20.80
7 > Enter proxy port: 8080
8 > Linger Time: not necessary
9 > DNS 1: Blank
10 > DNS 2: Blank, set bearer data: GPRS
11 > When the bearer is set to GPRS
set APN: tigowap
Login ID: Blank
Password: Blank
12 > Press save to save the profile.
41
Samsung SGH -G600
1 > In idle mode, press browser / browser settings or settings / connection
2 > select browser profile
3 > press New to add a new connection and add a new profile.
If a profile has already been saved, press options and select Edit
4 > Specify profile name: tigowap
5 > Enter the URL address of the page to be used as your home page: http://wap.tigo.co.tz
6 > Select network Bearer type: GPRS only or GSM only
7 > Activate proxy server: set enable
8 > Enter APN (access point name): tigowap
login ID and password leave blank.
9 > Set Data call type.
10 > Press save to save the profile.
42
Samsung SGH F210
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
In idle mode, press browser / browser settings
select browser profile for profile change
press options and select Edit
Specify profile name: tigowap
Activate Proxy Server / Specify URL: http://wap.tigo.co.tz
Enter IP address of the Proxy Server: 10.168.20.80
Enter the Port number of the proxy Server: 8080
DNS 1 And DNS 2 Leave Blank
Select the Network bearer type: GPRS
Advanced Settings / Enter APN: tigowap
Login ID and Password Leave Blank.
11 > Press save to save the profile.
43
Samsung SGH - G800
1 > In idle mode, press browser / browser settings
2 > Press create to add a new connection and add a new profile.
If a profile has already been saved, press options and select Edit
3 > Specify profile name: tigowap
4 > Enter Access name: tigowap
5 > Auth type set None
6 > User ID: Blank
Password: Blank
7 > Select protocol: WAP
8 > Home page URL enter: http://wap.google.com
9 > Proxy or Gateway address: 10.168.20.80
10 > proxy port: 8080
11 > enter the access point: tigowap
12 > Press save to save the profile.
44
Samsung SGH - J700
1>
2>
3>
4>
5>
6>
In idle mode, press browser / browser settings
Select a profile
Specify profile name: tigowap
Enter the URL address of the page to be used as your homepage http://wap.tigo.co.tz
Select the Network Bearer type: GPRS only or GSM only
When the bearer is set to GPRS:
ENTER proxy address IP 10.168.20.80
Proxy port: 8080.
7 > User ID: Blank
Password: Blank
8 > Set Data call type: ISDN
9 > Press save to save the profile.
45
Samsung SGH - D840
1 > In idle mode, press browser / browser settings
2 > Press New / Edit to add a new connection and add a new profile.
If a profile has already been saved, press Options and select Edit
3 > Specify profile name: tigowap
4 > Enter the URL address of the page to be used as your homepage http://wap.tigo.co.tz
5 > Enable proxy
6 > Enter Tigo IP address 10.168.20.80
7 > Enter prot number/ proxy port: 8080
8 > DNS 1 and DNS 2 Leave Blank
9 > Set Data bearer : GPRS
10 > Press save to save the profile.
46
Tigo Internet
(WAP) settings
LG WAP
SETTINGS
LG G5600 / T5100
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
From the Menu, go to Service / Internet / Select Profiles
Select Options and select Add new
Enter Profile name: tigowap
Select Options and select Activate to activate the profile
Go to Settings
Enter Homepage: http://wap.yahoo.com
Select Bearer: GPRS
Go to GPRS settings
Enter IP Address: 10.168.20.80
Enter APN: tigowap
Enter User ID: leave blank
Enter Password: leave blank
Press Back key to return to the previous menu
Select Connection type: Continuous
Select Security settings: Off
Press Back key to return to Internet main menu
Select Home to start WAP surfing
48
LG KP 215 / LG MP 280
1 > Menu / Select Settings / Select Connectivity / Select Network / Select Access Point
2 > Select Options / Select New Access Point
Login Name: tigowap
Select Carrier: GPRS
Enter APN: tigowap
Select Save
3 > Press Finish button
4 > Menu / Select Browser / Select Settings / Select Network Profiles / Select Options
5 > Select New Profile
Login Name: tigowap
Log Home page: http://wap.tigo.co.tz
Select Proxy Mode: On
Enter Proxy: 10.168.20.80
Enter Port Number: 8080
6 > Select Access Point: tigowap
7 > Select Options
8 > Keep
9 > Select Profile tigowap / Select Options
10 > Select Enable (check symbol should appear red on the tigowap profile)
49
Tigo Internet
(WAP) settings
SIEMMENS
WAP SETTINGS
Siemens Phones
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
Main menu / Settings / Select option and select
Scroll to connectivity
Gprs change (switch on gprs)
Scroll to rename
Profile name: tigowap
Select option and edit (changes may effect application cont? Yes)
Csd settings: ignore
Gprs setting / Select edit
Select apn: tigowap
Login id: skip
Password: skip
Dns1: ignore
Dns2: ignore and save to exit
Go back to the main menu
Select vodafon live/surf and fun
Select option and scroll to select set up
Scroll to profile and select option / Select to edit
Profile name: tigowap
Homepage: http://wap.tigo.co.tz
Protocol: •wap/wsp •http
Gateway/proxy server id: 10.168.20.80
Address: 10.168.20.80
Port: 8080
User name: skip
Password: skip
Gprs linger time: ignore
Csd linger time: ignore
51
Siemens S56 / Sl56
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
12 >
13 >
14 >
Main Menu
Search Browse and press Select
Search the Internet and press Select
Search Profiles and press Select
Search <profile > 1 and press Select
About <profile> 1 Press Edit
Find Name and press Edit
Write tigowap and press Done
Search IP Address and press Edit
Write 10.168.20.80 and Ready
Search Port and leave it in 8080
Search Home and press Edit
Write Press http://wap.tigo.co.tz and Ready
Search Expiry GPRS and press Edit
Write 15 and press Done
Search Expiry CSD and press Edit
Type 30 and press Done
Search connection profile and press Edit
Search tigowap and press Select
Lower press EXIT
52
Tigo Internet
(WAP) settings
VARIOUS WAP
SETTINGS
Sharp Gs15
1>
2>
3>
4>
Select middle key to menu
Settings
Scroll to network
Select wap settings
Profile name: tigowap
IP address: 10.168.20.80
Homepage: http://wap.tigo.co.tz
Port: 8080
Circuit prompt: enable
Connection type: gprs
5 > Select gprs settings
Apn: tigowap
User name: skip
Password: skip
Csd settings: ignore
6 > Go back to option to activate the profile created “tigowap” and launch the browser.
54
Nec 616V
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
Main menu / Settings
Scroll down to network setup
Select
Select apn:
Edit
Password in the box: 0000 (four zeros) and select ok
Scroll down and select network setup
Apn name: tigowap
Apn address: tigowap and click okay to exit
Select the browser launch key from the key pad
Select the middle key
Scroll down to url: http://wap.tigo.co.tz
You can now launch through the key pad to connect
55
Htc
56
1 > Desktop
2 > Login to: Configurations
3 > Login to: Wireless Configuration
Login: Go
Login to: Mobile Networks
Login and Select Network Mode: 3G & 2G
(if not working properly all wap settings, mms, internet, broadband, etc with the active 2G & 3G
option, then enable the option "Use only 2G" network)
Login to: Networks > Select Enable
4 > Login to: Access Point Names
5 > Select MENU
Select: NEW APN
Select: NAME
Login: tigowap
Select APN
Login: tigowap
Select: IP / Proxy
Login: 10.168.20.80
Select: Port Enter: 8080
6 > The other values remain unaffected.
7 > Select: MENU > Select: SAVE.
Alcatel 501
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
12 >
13 >
14 >
15 >
16 >
17 >
Press the OK button.
Scroll to and select Internet, to select an option press the ok button
Press the # key for about 5 sec to access the Browser menu while the browser is launching.
Scroll to and select 8 parameters.
Scroll to and select Profile 1.
At the Configuration Menu, enter the following information into the respective fields.
Profile Name: tigowap
Profile Address: 10.168.20.80
Profile Port: 8080
Scroll to and select Access Mode.
Scroll to and select Access 1 at the Choose Access menu
Scroll to and select RAS number: Leave blank
Scroll to and select tigowap for Access type
Scroll to and select 9600 Bit/s for Data Rate.
Press <C> to exit the ConnectParam Menu
Scroll to and select Username: leave blank
Scroll to and select Password. Leave blank
Press <C> to exit the Configuration Menu.
Scroll to and select Homepage Enter http://wap.yahoo.com
You may start your surfing experience now
57
Apple Iphone
1>
2>
3>
4>
5>
6>
7>
8>
9>
Go to the start menu and select settings option
Go to GPRS and choose PAP Authentication
Go to connections and perform the following under the ISP.
Add new connection: tigowap
Access Point Name: tigowap
Use proxy settings by entering the IP: 10.168.20.80
Port: 8080
Domain: empty
Save settings and go to the browser section to enter an address to access"
58
Palm
1>
2>
3>
4>
5>
6>
7>
8>
9>
10 >
11 >
12 >
13 >
14 >
15 >
16 >
17 >
Press start / home
Press settings
Select the connections tab
Select connections
Select under my work connection “add new modem connection” /
”add new modem connection”
Place in the fields:
Connection name: tigowap
In “select modem”: cellular line (gprs)
Click next
In access point name drop: tigowap
Click next
Leave username, password and domain blank
Press finish
Go to the edit my proxy server
Select the box: this network connects to internet
Select the box: this network uses a proxy server
In field server: 10.168.20.80
Select advanced: check the boxes are http and wap proxy 10.168.20.80
In http port enter 8080
Press ok
59
NOKIA 3G
NETWORK SETTINGS
Tigo Internet
3G Network Selection
Nokia 2690
61
1 > Menu
2 > Settings Connectivity / packet data / Packet data connection set when needed / always on line
3 > Go back then, Edit Active accesss Point
Allias for access point: tigowap
Packet data access point: tigowap
4 > Go back to settings / configuration / select personal configuration,
Select tigowap
Account name: tigowap
user name: skip
Password: skip
Use prefered access point: No
Access point settings Proxy: Enable
Proxy Address: 10.168.20.80
Proxy port: 8080
Data bearer: Packet Data
5 > Bearer Settings
Packet data access point: tigowap
Network type: IPv4
Authentication type: Normal
User name: skip
Password: skip
Nokia 5230
1 > Go to menu
2 > Scroll to settings, then select connectivity / Network
3 > Then set Network mode: Dual mode, to pick both UMTS for 3G and GSM for 2G
62
Nokia 6555
1 > Go to menu, select settings
2 > Go to Network mode
3 > Set Dual mode (UMTS and GSM)
63
Nokia 6300
1 > Go to Menu / then settings
2 > Select Packet Data then set HSCSD/GSM
(NOTE: HSCSD high speed circuit switched data).
64
Nokia 6700 Classic
1 > Go to menu / select settings / phone
2 > Network mode / select UMTS/GSM Network.
65
Nokia 6234
1>
2>
Go to menu / setting / select phone settings
Go to network and set WCDMA and GSM
66
Nokia N81
1 > Go to menu / Settings / select Phone / go to Network
2 > Then set Dual mode in order your phone to pick both GSM and UMTS automatically.
67
Nokia N900
1 > In the status the current network is indicated with the following icons:
2G- GSM, 2.5G EDGE, 3G - 3G and 3.5G - HSPA
2 > Go to menu / select setting / select Network / then select Dual,
3 > Then your device can select GSM/3G network Automatically.
68
Nokia X6-00
1 > Go to menu / select settings / go to connectivity / select Network
1 > Switch your phone Automatically between GSM&UMTS network.
69
Nokia N 95
1 > Go to menu / select settings / click phone setting
2 > Then press Network select Dual Mode set Automatic to use both GSM and UMTS
70
Nokia X6
1>
2>
3>
4>
5>
Go to menu / Settings / scroll down to connectivity
Then open Network
On Network mode set dual mode
Operator selection: Automatic
Cell info display set On
71
SONY ERICSSON 3G
NETWORK SETTINGS
Tigo Internet
3G Network Selection
Sony Ericsson W850 / W880 / W880i / K530i
1 > Go to Menu / then setting / select connectivity tab / Mobile Network
2 > Select GSM/3G Networks / (Gsm/3G Automatic)
73
Tigo Internet
3G Network Selection
SAMSUNG 3G
NETWORK SETTINGS
Samsung SGH E250i
1 > Menu / Browser / Profile settings / option
2 > Edit profile : tigowap
Profile name: tigowap
Home URL: http://wap.tigo.co.tz
Bearer: GPRS only
Proxy: Enable
3 > GPRS Settings:
Proxy IP: 10.168.20.80
Proxy port: 8080
APN: tigowap
Log in ID: empty
Password: empty
4 > Save
75
Tigo Internet
3G Network Selection
LG 3G
NETWORK SETTINGS
LG KU 990
1 > Go to menu
2 > Click setting / Network services
3 > Set network mode automatic mode then set GSM and WCDMA.
77
WAP
SETTINGS
Tigo Internet 3G
Settings
Blackberry Services (all types of blackberry phones)
79
How to resend service book
1 > Remove battery from the device
2 > Leave the battery out for at least 30 seconds
3 > Replace battery and let the device reboot.
Do this normally when, Web browser Icon is missing when Resending service book
if E-mail stopped arriving.
1. From the menu
go to option.
2. Select the
Advanced options
3. Select Host
Rooting Table
4. Scroll down to Option
then select > Register now
Set Up Blackberry Messenger 1. Request using PIN
3. Request a Friend Using His/Her PIN
1. Locating a Device's PIN
2. Add the PIN of your contact
to the Address Book.
• Select Options from
the main menu.
• Select Status and scroll
• Select Address Book
down to the PIN on your
from the main menu.
BlackBerry device.
• Press the BlackBerry button
• Copy the PIN by pressing
on your device, and select
the BlackBerry button
New Address.
(or Berry button) on your • Input the contact’s name,
device, and select Copy
contact details, and PIN.
• Select BlackBerry Messenger
from the main menu.
• Press the BlackBerry butto(or Berry button) on your
device, and select Add a Contact.
• You will be brought to the Address Book.
Select the contact whose PIN you previously added.
• Enter a personal message and/or select OK.
The contact will be added to the pending group
in BlackBerry Messenger. When the contact accepts
you they will be added to your list of contacts.
Blackberry Services (all types of blackberry phones)
80
2. Requesting Blackberry Messenger Using Email.
1. Add your contact's e-mail address
to the Address Book.
2. Request a Friend Using
His/Her PIN
Step 2: Start Chatting.
• Select Address Book
from the BlackBerry main menu.
• Press the BlackBerry button
(or Berry button) on your device,
and select Add a Contact.
• Input the contact’s name,
contact details, and e-mail address.
• Select BlackBerry Messenger
from the main menu.
• Press the BlackBerry button
(or Berry button) on your device,
and select Add a Contact.
• You will be brought to the
Address Book. Select the contact
whose e-mail address you added.
• Enter a personal message and/or
select OK. The contact will be
added to the pending group
in BlackBerry Messenger.
When the contact accepts you,
he/she will be added to
your list of contacts.
• Select the contact name.
• Start typing your message.
• To send, press Enter or simply
press your trackball or wheel.
• Press Esc to exit the conversation.
This will not end the conversation;
it will stay in your Current
Conversations folder.
• When you are finished chatting,
click the trackball and select
End Conversation.
Iphone 3G manual settings
81
Go to menu, select settings
Scrol down to General
Select Network,
set Location Service On
Select cellular Data Network
Activate Data Roaming set On,
Go back to Network,
Select Advanced,
then Set APN as tigowap,
and follow instruction
to do other settings.
Go to General, then Network
Cellular Data Network,
set Data roaming On.
www.tigo.co.tz