LV Power Distribution

Transcription

Table of Contents
1
Residential Products
Fuse-Links & Fuse Bases
Circuit Protection . . . . . . . . . . . . . . . . . .1-2
BS88 HRC Clip-in Type Fuse-Links . . .1-66
Plastic Loadcentres . . . . . . . . . . . . . . . .1-4
BS88 HRC Clip-in Type Fuse Bases . . .1-67
Metal Loadcentres and Boards . . . . . . .1-5
BS88 HRC Bolt-in Type Fuse-Links . . .1-68
BS88 HRC Bolt-in Type Fuse Bases . . .1-72
Miniature Circuit Breakers
HRC Cylinder Type Fuse-Links . . . . . . .1-75
Quicklag and ELQ . . . . . . . . . . . . . . . . . .1-8
House Service Fuse-Links . . . . . . . . . .1-78
DIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10
House Service Fuse Bases . . . . . . . . .1-79
J-Type Fuse-Links . . . . . . . . . . . . . . . . .1-80
Moulded Case Circuit Breakers
DIN Type Fuse-Links . . . . . . . . . . . . . . .1-82
Series G 415VAC Power . . . . . . . . . . . .1-14
DIN Fuse Switch Disconnectors . . . . .1-84
Series G 415VAC Motor Protection . .1-20
BS88 Semi-Conductor Fuse-Links . . .1-88
Rock 1100VAC Mining . . . . . . . . . . . . .1-32
Fuse-Link Comparison Chart . . . . . . . .1-90
Transfer Switches . . . . . . . . . . . . . . . . .1-27
Fuselink Selection TableMotor Protection . . . . . . . . . . . . . . . . .1-91
Air Circuit Breakers
Street Lighting Fuse-Links . . . . . . . . . .1-92
Magnum . . . . . . . . . . . . . . . . . . . . . . . .1-28
Switchgear
Low Voltage Assemblies
Street Light Cut-Outs . . . . . . . . . . . . . .1-93
Plastic Loadcentres . . . . . . . . . . . . . . . 1-50
Multivert Fuse Strip Disconnectors . .1-94
Metal Loadcentres . . . . . . . . . . . . . . . .1-52
Pillar Boxes . . . . . . . . . . . . . . . . . . . . . .1-95
Metal Distribution Boards . . . . . . . . . .1-54
Holec QM Series Switch
Chassis . . . . . . . . . . . . . . . . . . . . . . . . .1-62
Disconnectors . . . . . . . . . . . . . . . . . . . .1-96
Holec Dumeco Series Switch . . . . . . . . . .
Disconnectors . . . . . . . . . . . . . . . . . . . .1-98
Holec QSA Series Fuse Switches . . .1-100
Holec QA Series Switch
Disconnectors . . . . . . . . . . . . . . . . . . .1-101
Holec QP & QE Series Switch
Disconnectors . . . . . . . . . . . . . . . . . . .1-102
Holec Switch Accessories . . . . . . . . .1-104
MEMProof Enclosed Isolators . . . . . .1-107
EATON CORPORATION LV Power Distribution
1-1
Residential Circuit Breakers
The new Eaton Residential range of products is the ideal
choice for power distribution in houses, apartment blocks,
hotels and other similar residential and light commercial
applications. The circuit breakers have a 6kA breaking
capacity rating to accommodate the recent changes to the
Victorian and Western Australian wiring rules.
1
Single Pole Circuit Breaker
Single pole circuit breakers are used to protect conductors from the damaging
effects of overloads and short circuits.
Stock Code S
Ampere
Rating
Description
Cat No.
6A
10A
16A
20A
25A
32A
40A
50A
63A
MCB 6kA 1P 6A C curve
ER061C06
ER061C10
ER061C16
ER061C20
ER061C25
ER061C32
ER061C40
ER061C50
ER061C63
Price $
ex GST
10.69
10.69
10.69
10.69
10.69
10.69
10.69
10.69
10.69
Triple Pole Circuit Breaker
Three pole circuit breakers provide the same protection as single phase
breakers and are used where three-phase power is required such as large
houses and high power air conditioners.
Stock Code S
Ampere
Rating
Description
Cat No.
6A
10A
16A
20A
25A
32A
40A
50A
63A
ER063C06
ER063C10
ER063C16
ER063C20
ER063C25
ER063C32
ER063C40
ER063C50
ER063C63
Main Switch
Main switches are used to isolate the entire distribution board.
Description
Cat No.
1P
ISOLATOR 1P 40A
ISOLATOR 1P 63A
ISOLATOR 2P 40A
ISOLATOR 2P 63A
ISOLATOR 3P 40A
ISOLATOR 3P 63A
ISOLATOR 3P 100A
ISOLATOR 4P 40A
ISOLATOR 4P 63A
ERSW140
ERSW163
ERSW240
ERSW263
ERSW340
ERSW363
ERSW3100
ERSW440
ERSW463
3P
4P
All Prices Exclude GST
37.15
37.15
37.15
37.15
37.15
37.15
37.15
37.15
37.15
Stock Code S
Poles
2P
1-2
Price $
ex GST
Price $
ex GST
8.42
8.96
19.22
19.76
23.97
25.16
48.49
37.15
37.80
Discount Schedule E10
Residential Earth Leakage Protection
Two Pole Safety Switch
Safety switches are used to provide earth leakage protection to protect
people against electric shock. They are mandatory for all lighting and
socket outlet circuits as per AS/NZS 3000:2007
Stock Code S
Ampere
Rating
Description
16A
25A
40A
63A
RCCB 2P 16A 30mA
RCCB 2P 25A 30mA
RCCB 2P 40A 30mA
RCCB 2P 63A 30mA
Cat No.
EREL21630
EREL22530
EREL24030
EREL26330
Four Pole Safety Switch
Used where earth leakage protection is required for three phase power
distribution.
Ampere
Rating
Description
25A
40A
63A
RCCB 4P 25A 30mA
RCCB 4P 40A 30mA
RCCB 4P 63A 30mA
Cat No.
EREL42530
EREL44030
EREL46330
1
Price $
ex GST
95.90
95.90
95.90
101.84
Stock Code S
Price $
ex GST
113.83
113.83
113.83
Single Pole Combo
Combination MCB/RCD units provide overload, short circuit and earth
leakage protection in a single unit, allowing separate protection for each
circuit and minimising the power outage when tripped.
Stock Code S
Ampere
Rating
6A
10A
16A
20A
25A
32A
40A
Cat No.
Description
RCBO 6kA 1P 6A 30mA C curve
ERCBO1P0630
ERCBO1P1030
ERCBO1P1630
ERCBO1P2030
ERCBO1P2530
ERCBO1P3230
ERCBO1P4030
Price $
ex GST
119.88
119.88
119.88
119.88
119.88
119.88
119.88
Protect your expensive electronic devices
Expensive electronic devices such as plasma & LCD televisions, computers and
home entertainment systems are becoming more and more prolific in houses
and other residential buildings.
Protect them against the damaging effects of lightening and other power
transients by installing surge protection equipment. Refer to chapter 4 for more
information.
1-3
Residential Plastic Load Centres/LLCs
1
Plastic load Centres
The new Eaton Residential Plastic Load Centres are the ideal solution for
mounting protection equipment in a domestic application.They are even
large enough to fit single pole RCBO’s. With ample wiring room and
simple mounting in an economical package, these load centres are
perfectly suited to your requirements.
Description
Cat. No.
9 pole surface
18 pole surface
ERPLC09S
ERPLC18S
Stock
Code
Price $
ex GST
S
S
100.00
107.35
Loaded Load Centres
Eaton’s Loaded Load Centres are supplied fitted with the rquired
combination and layout of protection devices. Shown below is a table
outlining just a few of the choices. Due to the large number of
combinations possible, please select your required layout and contact
your local Eaton branch for pricing and more information.
ERLLC 2 1
Circuit Breaker Ratings
1
2
3
4
Range
=
=
=
=
1x32A, 2x20A & 2x10A
1x32A, 2x16A & 2x10A
1x32A, 2x20A & 2x16A
1x32A, 2x25A & 2x16A
ER = Eaton Residential
Board Layout
Type
LLC = Loaded Load Centre
1-4
1
2
3
4
=
=
=
=
1 RCCB & 5 MCB’s
2 RCCB & 5 MCB’s
4 RCBO’s & 1 MCB
1 4P RCCB & 5 MCB’s
(Commonly used in QLD)
Residential Metal Distribution Boards
Metal Distribution Boards
1
Designed for light commercial applications the new Eaton ER range of metal distribution boards offer a simple and
cost effective solution for power distribution. The simplicity of the design ensures that you are not paying for
features and options that are not required in these basic applications.
Large Colour Coated Circuit Labels
200A Non-Auto MCCB Main Switch
Manual Release Hinges
Description
Cat. No.
1 row horizontal style, no main switch
24 pole vertical style 100A main switch
48 pole vertical style 200A main switch
Discount Schedules:E10
ER114MKS
ER228MKS
ER342MKS
ER81CBSS
ER162CBSS
Stock
Code
I
I
I
I
I
Price $
ex GST
POA
POA
POA
POA
POA
1-5
Miniature Circuit Breaker - Quicklag
Quicklag - With a long history of reliable service, Quicklag has set the standard for
Australian circuit breakers.
1
Thermal setting
Magnetic setting
Interrupting capacity
fixed
non-adjustable
6kA at 440Vac/2,3,4 pole
6kA at 250Vac/1 pole
Approvals
AS3111, AS2184, Lloyd’s
Dimensions
1
2
3
4
Quicklag - 6kA
Ampere
1 pole
Rating
Cat. No.
8
Q108
10
Q110
16
Q116
20
Q120
25
Q125
32
Q132
40
Q140
50
Q150
63
Q163
80
Q180
100
Q1100
80*
Q180N
100*
Q1100N
Price $
ex GST
51.08
51.08
51.08
51.08
51.08
51.08
51.08
51.08
81.86
111.99
111.99
73.65
76.78
2 pole
Cat. No.
Q208
Q210
Q216
Q220
Q225
Q232
Q240
Q250
Q263
Q280
Q2100
Q280N
Q2100N
Height
92mm
92mm
92mm
92mm
pole
pole
pole
pole
Price $
ex GST
150.12
150.12
150.12
150.12
150.12
150.12
150.12
150.12
222.15
294.40
294.40
152.49
166.42
Width
25mm
51mm
76mm
101mm
3 pole
Cat. No.
Q308
Q310
Q316
Q320
Q325
Q332
Q340
Q350
Q363
Q380
Q3100
Q380N
Q3100N
Quicklag with 240Vac Shunt Trip (Intermittent rated) - Factory Fitted Only
Ampere
1 pole
Price $
2 pole
Price $
3 pole
Rating
Cat. No.
ex GST
Cat. No.
ex GST
Cat. No.
8
Q108-ST2
313.09
Q208-ST2
412.02
Q308-ST2
10
Q110-ST2
313.09
Q210-ST2
412.02
Q310-ST2
16
Q116-ST2
313.09
Q216-ST2
412.02
Q316-ST2
20
Q120-ST2
313.09
Q220-ST2
412.02
Q320-ST2
25
Q125-ST2
313.09
Q225-ST2
412.02
Q325-ST2
32
Q132-ST2
313.09
Q232-ST2
412.02
Q332-ST2
40
Q140-ST2
313.09
Q240-ST2
412.02
Q340-ST2
50
Q150-ST2
313.09
Q250-ST2
412.02
Q350-ST2
63
Q163-ST2
363.85
Q263-ST2
504.36
Q363-ST2
80
Q180-ST2
397.33
Q280-ST2
580.60
Q380-ST2
100
Q1100-ST2
397.33
Q2100-ST2
580.60
Q3100-ST2
80*
Q180N-ST2
359.85
Q280N-ST2
438.80
Q380N-ST2
100*
Q1100N-ST2 362.55
Q2100N-ST2
452.08
Q3100N-ST2
Price $
ex GST
182.41
182.41
182.41
182.41
182.41
182.41
182.41
182.41
267.30
353.80
353.80
216.75
240.30
Price $
ex GST
444.09
444.09
444.09
444.09
444.09
444.09
444.09
444.09
549.93
639.46
639.46
502.95
525.74
Depth
67mm
67mm
67mm
67mm
Weight
0.17kg
0.37kg
0.56kg
0.70kg
4 pole
Cat. No.
Q408
Q410
Q416
Q420
Q425
Q432
Q440
Q450
Q463
Q480
Q4100
Q480N
Q4100N
Stock Code S
Price $
ex GST
232.84
232.84
232.84
232.84
232.84
232.84
232.84
232.84
350.46
469.58
469.58
291.60
313.84
Stock Code S
4 pole
Price $
Cat. No.
ex GST
Q408-ST2
485.67
Q410-ST2
485.67
Q416-ST2
485.67
Q420-ST2
485.67
Q425-ST2
485.67
Q432-ST2
485.67
Q440-ST2
485.67
Q450-ST2
485.67
Q463-ST2
580.60
Q480-ST2
667.54
Q4100-ST2
667.54
Q480N-ST2
591.30
Q4100N-ST2
616.78
Protect your expensive electronic devices with QuickmovTM
In today’s highly competitive markets, surge suppression is recognised
as the key to solving transient related power quality problems. Small
businesses, manufacturers, multinational corporations and defence
research facilities worldwide have learned that their initial investments
in surge suppression can be quickly returned by reducing equipment
damage, decreasing maintenance costs and improving system uptime.
Eaton have designed a surge protection device specifically for use with the
Quicklag range of breakers. Refer to page 4-5 for more information on the
Quickmov Surge Suppressor.
1-6
Discount Schedule C1
Earth Leakage Quicklag - ELQ
ELQ - For overload, short - circuit and earth leakage protection
1P ELQ Approval No. N20187. AS3111, AS3190, and AS2184 for 1kA, 2kA, 3kA and 6kA interrupting capacities at 250Vac 50Hz.
Tripping times less than 30 milliseconds!
1
1P ELQ is suitable for both aboveground and underground applications in accordance to the Coal Mines Underground
Regulations (1999) Clause 140 and AS2081 Part 3.
New TW - Trip Indication Window
New TW style includes trip window that indicates ‘trip’ by means of a red flag.
Dimensions
Neutral Cable
Height
1 pole 112mm
2 pole 112mm
6mm2 x 1000mm
Width
25mm
51mm
Depth
67mm
67mm
Weight
0.23Kg
0.45Kg
Ampere
Rating
Sensitivity
10
30mA
16
30mA
20
30mA
25
30mA
32
30mA
Stock Code S
Price $
ex GST
319.46
319.46
319.46
319.46
319.46
10
16
20
25
32
10mA
10mA
10mA
10mA
10mA
ELQ110C1TW
ELQ116C1TW
ELQ120C1TW
ELQ125C1TW
ELQ132C1TW
418.71
418.71
418.71
418.71
418.71
10
100mA
ELQ110C10TW
399.38
16
20
25
32
100mA
100mA
100mA
100mA
ELQ116C10TW
ELQ120C10TW
ELQ125C10TW
ELQ132C10TW
399.38
399.38
399.38
399.38
2 pole
Cat. No.
ELQ210C3TW
ELQ216C3TW
ELQ220C3TW
ELQ225C3TW
ELQ232C3TW
Stock Code S
Price $
ex GST
369.80
369.80
369.80
369.80
369.80
(Industrial Use Only)
Ampere
Rating
Sensitivity
10
30mA
16
30mA
20
30mA
25
30mA
32
30mA
1 pole
Cat. No.
ELQ110C3TW
ELQ116C3TW
ELQ120C3TW
ELQ125C3TW
ELQ132C3TW
1-7
Earth Leakage Quicklag - ELDO/QELDO
These compact residual current relays fit into the same space as a single pole Quicklag breaker. The ELDO relay uses an electrical
signal to trip the breaker via an integral shunt trip and can be mounted the separately from the Quicklag breaker which must be
ordered with a shunt trip device fitted (e.g: ELDO32 + Q320-ST2). The QELDO relay uses a mechanical link to trip the breaker and
cannot be separated from the breaker. The QELDO and Quicklag breaker must be ordered assembled at the factory, also
indicating which side the QELDO will be on (e.g: QELDO34 + Q320 RHS).
1
The toroid’s aperture is 32mm. This equates to a capacity of 4 x 35mm2 PVC V75 single insulated cables.
The ELDO X3 relays have a separate 10A rated change-over relay for use with contactors and under-voltage release devices.
Note that the connection methods alter depending on whether used as a main incoming device or outgoing device.
Approvals
A = AS3190 approval
C = CS39993N certification
Dimensions
Height
143mm
Width
25mm
Depth
67mm
Weight
0.45kg
ELDO Relays
Sensitivity
Milliampere
10
30
30
30
100
100
300
300
500
500
1000
Sensitivity
Milliampere
30
30
100
300
500
1000
Description
Approval
240V
240V
440V
550V
240V
440V
240V
440V
240V
440V
240V
A
A
A
A
A
A
A
C
C
C
Description
Approval
240V
440V
240V
240V
440V
240V
A
A
A
A
C
C
Cat No.
Stock Code
ELDO12
ELDO32
ELDO34
ELDO35
ELDO102
ELDO104
ELDO302
ELDO304
ELDO502
ELDO504
ELDO1002
Q
S
S
Q
Q
Q
Q
Q
Q
Q
Q
Cat No.
501.76
454.89
454.89
717.88
717.88
717.88
717.88
717.88
899.64
899.64
1062.39
Stock Code
ELDO32X3*
ELDO34X3*
ELDO102X3*
ELDO302X3*
ELDO504X3*
ELDO1002X3*
Price $
ex GST
Q
Q
Q
Q
Q
Q
Price $
ex GST
756.75
756.75
756.75
756.75
756.75
756.75
* Note: These relays have a separate change-over relay for use with contactors and undervoltage release devices.
QELDO Relays
Description
Approval
Cat No.
Stock Code
10
30
30
240V
240V
440V
A
A
A
QELDO12
QELDO32
QELDO34
Q
Q
Q
Price $
ex GST
650.05
650.05
650.05
100
100
300
300
500
500
1000
240C
440V
240V
440V
240V
440V
240V
A
A
A
A
C
C
C
QELDO102
QELDO104
QELDO302
QELDO304
QELDO502
QELDO504
QELDO1002
Q
Q
Q
Q
Q
Q
Q
936.46
936.46
976.86
976.86
1009.80
1009.80
1172.88
Sensitivity
Milliampere
1-8
Quicklag Accessories
Quicklag - An extensive range of accessories is available for Quicklag:
Accessory
Cat. No.
(35mm2)
Tunnel Terminal Kit
(see Note 3)
T100Q Terminal (50mm2 - 100A) (see Note 3)
2
T50Q Terminal (25mm - 50A) (see Note 3)
Switch-Quicklag Alarm Right Hand Mount (Factory Fitted Only)
Lockdog-Quicklag 10 Pack
Front Mounting Plate-Quicklag
Handle Padlock-Quicklag (1pole) Padlock + bracket
Handle Lock-Quicklag (2&4 Pole)
Handle Lock-Quicklag (3 Pole)
Lock Off Bracket Kit (10 Pack)
Lock Off Device - (see Note 1)
Single Lock Off/On Device - (see Note 2)
Lock On/Off Device Quicklag - (see Note 1 & 2)
Quicklag DIN Adaptor ( Pack of 6) (see Note 3)
Quicklag Pole Filler
Lockdog Kit ELQTW (no padlock) - Single pole only
ELQ to E frame Adaptor Kit ELQ (S1Q also required)
3 Pole Sliding Clip Tray (see Note 3)
Standard Chassis (see Note 3)
Chasis Tray
QLUGKIT
T100Q
T50Q
1517-0525/1
LKDQ
MPQ1
PLKQ1
PLKQ24
PLKQ3
1517-1299/1
1517-1277/1
1517-1281/1
1517-1290/1
QLDINADAPT
QPF
LKDELQTW
ELQ-E-KIT
SC3Q
SC6Q
SC12Q
SC24Q
C36Q
QX-T
Stock Code
Price $
ex GST
33.48
42.87
5.50
144.39
11.88
14.90
37.47
42.87
42.87
97.09
68.79
36.18
52.05
39.52
0.86
25.81
112.10
17.82
26.78
44.60
78.94
19.33
19.33
S
S
S
W
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
Note 1: Individual locking for 2 opposite circuit breakers
Note 2: Mounted to standard QCE/EWQ escutcheon for single or multipole circuit breakers
Note 3: Compatible with Quickmov Surge Diverter
QLUGKIT
T100Q
T50Q
LKDQ
MPQ1
PLKQ24
PLKQ3
1517-1299/1
1517-1277/1
1517-1281/1
QPF
QLDINADAPT
ELQ-E-KIT
QX-T
C36Q
SC6Q
1-9
Memshield 2 DIN Miniature Circuit Breakers
1
The Eaton IEC DIN MCB range is
manufactured in the United Kingdom
at the Eaton Electric Birmingham
facility.
Compliant to IEC60898
Available in B, C and D curve
characteristics, 10kA interrupting
capacity. Fixed thermal calibrated to
40°C
Approval No. 14928
18mm wide per pole.
6kA
Curve C (5 ~ 10 x In)
C Curve breakers are used in most general power distribution applications, such as lighting
circuits and power sockets.
9Ampere 1 pole
Rating Cat. No.
10
MCL110
16
MCL116
20
MCL120
25
MCL125
32
MCL132
40
MCL140
50
MCL150
63
MCL163
10kA
2 pole
Cat. No.
-
Price $
ex GST
-
3 pole
Cat. No.
MCL310
MCL316
MCL320
MCL325
MCL332
MCL340
MCL350
MCL363
Price $
ex GST
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
Stock Code S
4 pole
Price $
Cat. No.
ex GST
-
Curve C (5 ~ 10 x In)
C Curve breakers are used in most general power distribution applications, such as lighting
circuits and power sockets.
Ampere 1 pole
Rating Cat. No.
1
MCH101
2
MCH102
4
MCH104
6
MCH106
10
MCH110
16
MCH116
20
MCH120
25
MCH125
32
MCH132
40
MCH140
50
MCH150
63
MCH163
1-10
Price $
ex GST
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
Price $
ex GST
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
32.83
2 pole
Cat. No.
MCH201
MCH202
MCH204
MCH206
MCH210
MCH216
MCH220
MCH225
MCH232
MCH240
MCH250
MCH263
Price $
ex GST
108.32
108.32
108.32
108.32
108.32
108.32
108.32
108.32
108.32
108.32
108.32
108.32
3 pole
Cat. No.
MCH301
MCH302
MCH304
MCH306
MCH310
MCH316
MCH320
MCH325
MCH332
MCH340
MCH350
MCH363
Price $
ex GST
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
138.88
Stock Code S
4 pole
Price $
Cat. No. ex GST
MCH401
198.18
MCH402
198.18
MCH404
198.18
MCH406
198.18
MCH410
198.18
MCH416
198.18
MCH420
198.18
MCH425
198.18
MCH432
198.18
MCH440
198.18
MCH450
198.18
MCH463
198.18
Discount Schedule B16
Memshield 2 DIN Miniature Circuit Breakers
10kA
10kA
1
Curve B (3 ~ 5 x In)
B Curve breakers provide faster tripping on low energy short circuits in applications with low
fault levels such as generators and long cable runs. They can also used where the Earth Fault
Loop Impedance is too high to use a standard C Curve breaker.
Ampere
Rating
1
2
4
6
10
16
20
1 pole
Cat. No.
MBH101
MBH102
MBH104
MBH106
MBH110
MBH116
MBH120
Price $
ex GST
38.23
38.23
38.23
38.23
38.23
38.23
38.23
2 pole
Cat. No.
MBH201
MBH202
MBH204
MBH206
MBH210
MBH216
MBH220
Price $
ex GST
113.18
113.18
113.18
113.18
113.18
113.18
113.18
3 pole
Cat. No.
MBH301
MBH302
MBH304
MBH306
MBH310
MBH316
MBH320
Price $
ex GST
155.62
155.62
155.62
155.62
155.62
155.62
155.62
Stock Code S
4 pole
Price $
Cat. No. ex GST
MBH401 226.58
MBH402 226.58
MBH404 226.58
MBH406 226.58
MBH410 226.58
MBH416 226.58
MBH420 226.58
25
32
40
50
63
MBH125
MBH132
MBH140
MBH150
MBH163
38.23
38.23
38.23
38.23
38.23
MBH225
MBH232
MBH240
MBH250
MBH263
113.18
113.18
113.18
113.18
113.18
MBH325
MBH332
MBH340
MBH350
MBH363
155.62
155.62
155.62
155.62
155.62
MBH425
MBH432
MBH440
MBH450
MBH463
226.58
226.58
226.58
226.58
226.58
Curve D (10 ~ 20 x In)
D Curve breakers are less susceptible to nuisance tripping on the high inrush currents
associated with motor starting and similar applications
Ampere
Rating
1
2
4
1 pole
Cat. No.
MDH101
MDH102
MDH104
Price $
ex GST
38.23
38.23
38.23
2 pole
Cat. No.
MDH201
MDH202
MDH204
Price $
ex GST
113.18
113.18
113.18
3 pole
Cat. No.
MDH301
MDH302
MDH304
Price $
ex GST
155.62
155.62
155.62
Stock Code S
4 pole
Price $
Cat. No. ex GST
MDH401 226.58
MDH402 226.58
MDH404 226.58
6
10
16
20
25
32
MDH106
MDH110
MDH116
MDH120
MDH125
MDH132
38.23
38.23
38.23
38.23
38.23
38.23
MDH206
MDH210
MDH216
MDH220
MDH225
MDH232
113.18
113.18
113.18
113.18
113.18
113.18
MDH306
MDH310
MDH316
MDH320
MDH325
MDH332
155.62
155.62
155.62
155.62
155.62
155.62
MDH406
MDH410
MDH416
MDH420
MDH425
MDH432
226.58
226.58
226.58
226.58
226.58
226.58
Co-ordination with Upstream Breakers
The 10kA DIN Miniature Circuit Breakers
have been tested for cascading and
discrimination with the Series G Moulded
Case Circuit breakers.
The test results can be used to design a
fully co-ordinatined power distribution
system. These tables can be found on
pages 1-38 - 1-43
1-11
Memshield 2 DIN Residual Current Devices
Residual Current Devices include RCBO and RCCB type devices.
RCBO’s provide combination protection against over current, short circuit and/or
earth-leakage faults. RCCB provide protection of earth-leakage faults only.
1
Unique features: 40A, 50A and 63A ratings are possible with Eaton RCBO.
Also B, C and D curve with “ earth - leakage POD”.
Type “A” characteristic.
Approval No. 14929
Earth Leakage RCBO - Single Pole
Ampere
Rating
6
10
16
20
25
10kA 30mA
Cat. No.
MCH106R30
MCH110R30
MCH116R30
MCH120R30
MCH125R30
32
40
50
63
MCH132R30
MCH140R30**
MCH150R30**
MCH163R30**
Stock Code S
Price $
ex GST
335.12
335.12
341.49
347.86
347.86
347.86
347.86
347.86
347.86
** Note: This product is ordered as a 10kA C curve MCB (ALMCH) and combines
with an R30L earth-leakage pod with 500mm length of 6 sq.mm neutral cable.
Earth Leakage POD - Single Pole - 18mm module width - up to 63A
Sensitivity
rating - mA
10mA
30mA
30mA
100mA
Time
rating
Instant
Instant
Instant
Instant
Neutral
length
1200mm
1200mm
500mm
500mm
Cable
size
4 sq.mm
4 sq.mm
6 sq.mm
4 sq.mm
Cat No.
R10L*
R30L*
R30
R100
Stock
Code
I
S
S
I
100mA
300mA
Delay
Delay
500mm
500mm
4 sq.mm
4 sq.mm
R100D
R300D
I
I
Stock Code S
Price $
ex GST
300.78
276.48
276.48
276.48
319.89
319.89
*Note: Can be fitted to MCB up to 32A only. By factory only.
Mounting Solutions
The ALMCH range of RCBOs are fully compatible with
standard DIN chassis and panelboards.
Eaton manufactures a wide range of chassis and
panelboards for mounting all circuit breaker ranges at its
Mascot facility.
Refer to pages 1-50 - 1-65 for selection of the
appropriate mounting equipment
1-12
EATON CORPORATION Power Distribution
Discount Schedule B16; E/L POD - B22
Memshield 2 DIN Residential Current Devices
Earth Leakage RCCB
2 pole 30mA
Cat. No.
Price $
ex GST
2 pole 100mA
Cat. No.
Price $
ex GST
Stock Code S
2 pole 300mA
Price $
Cat. No.
ex GST
25
40
AM25HE
AM40HE
155.41
155.41
AM25ME
AM40ME
155.41
155.41
AM25LE
AM40LE
155.41
155.41
63
80
100
AM63HE
AM80HE
AM100HE
197.53
225.61
239.54
AM63ME
AM80ME
AM100ME
197.53
225.61
239.54
AM63LE
AM80LE
AM100LE
197.53
225.61
239.54
Ampere
Rating
16
2 pole 10mA Price $
Cat. No.
ex GST
AM16VHE
253.58
Ampere
Rating
40
63
80
100
4 pole 30mA
Cat. No.
AM404H
AM634H
AM804H
AM1004H
Price $
ex GST
291.81
310.82
381.02
381.02
4 pole 100mA
Cat. No.
AM404M
AM634M
AM804M
AM1004M
Price $
ex GST
239.54
253.58
381.02
381.02
4 pole 300mA
Cat. No.
AM404L
AM634L
AM804L
AM1004L
Stock Code S
Price $
ex GST
239.54
253.58
381.02
381.02
Price $
ex GST
41.47
2 pole
Cat. No.
MS1002
Price $
ex GST
73.98
3 pole
Cat. No.
MS1003
Stock Code S
Price $
ex GST
161.35
Switch Disconnectors
Ampere
Rating
100
1 pole
Cat. No.
MS1001
Accessories
Cat. No.
Stock Code
Alarm Contact 1C/O
Auxiliary Contact 1C/O
Shunt Trip 24Vac/24Vdc
Shunt Trip 48-110Vac/48-60Vdc
Shunt Trip 240Vac/110Vdc
Under-voltage Release 240Vac
Padlocking Device MCB/RCBO
M2AL
M2AU
M2STA
M2STB
M2STC
M2UV240
MBL2
I
S
I
I
S
S
S
Price $
ex GST
45.79
45.79
66.96
66.96
225.61
171.82
15.76
SML4
MBP
MB1P56
MTSH1
MTS1
MBRC1
S
S
S
S
I
I
19.98
4.21
53.02
15.76
8.64
21.60
Padlock Attachment for Switch Disconnector
Single pole blanking module (pole filler + tee-off cap in one)
Busbar Comb 56 way, Single pole, Insulated
MCB Terminal Shroud (each)
MCB Terminal Screw Shield (each)
MCB Terminal Rear Connectors, 50mm2 maximum (each)
1-13
1
Series G Moulded Case Circuit Breakers
1
13
12
11
17
14
0
N
I
16
0
F
F
15
19
18
T
E
S
T
20
1
T
E
S
T
4
3
2
WARNING
reset
test
6
10
7
5
8
9
24
ON
OFF
23
OFF/O
OFF/O
I
ON
Trip
ON/I
Trip
OFF
O
ON/I
22
21
25
Item
1-14
Description
Page
1
Circuit Breaker Frames
1-15 -1-19
2
Trip Units
1-15 - 1-19
9
Multiwire Connectors
3
Non-auto breakers
1-15 - 1-19
10
Spreader Bars
4
Magnetic Only
1-20
11
Terminals Shields
1-22
5
Metric End Cap Kits
1-21
12
End covers
6
Cage Clamp Tunnel Terminals 1-21
13
7
Round Tunnel Terminals
14
1-21
Item
8
Description
Page
Item
Description
Page
Item
Description
Page
15
Lock Blocks
1-24
22
Extended rotary handles
1-24
1-21
16
Locking Hasps
1-24
23
Flexible cable operators
1-24
1-21
17
DIN Rail adaptor
1-26
24
Earth Leakage devices
1-25
18
Auxiliary Contacts
1-23
25
Motor Operators
1-26
1-22
19
Alarm Contacts
1-23
Interphase Barriers
1-22
20
Trip Coils
1-23
Plug-in Base
1-22
21
Direct rotary Handles
1-24
Double Cable Connectors 1-21
Moulded Case Circuit Breakers - Series G
E Frame 160 Ampere
AFM Adjustable Thermal Fixed Magnetic Circuit Breakers
FFG Fixed Thermal Fixed Magnetic Circuit Breakers
Dimensions (mm)
1 pole
2 pole
3 pole
4 pole
Height
139.70
139.70
139.70
139.70
Width
25.40
50.80
76.20
101.60
Model: GEB 1 pole GEE 2,3 & 4 pole
Ampere
1 pole * Fixed Thermal
Rating
Cat. No.
Price $
16
GEB1016FFG
123.87
20
GEB1020FFG
123.87
25
GEB1025FFG
123.87
32
GEB1032FFG
123.87
40
GEB1040FFG
123.87
50
GEB1050FFG
123.87
63
GEB1063FFG
123.87
80
GEB1080FFG
239.76
Icu/Ics = 25/25kA
2 pole Fixed Thermal
Cat. No.
Price $
GEE2016FFG
162.43
GEE2020FFG
162.43
GEE2025FFG
162.43
GEE2032FFG
162.43
GEE2040FFG
162.43
GEE2050FFG
162.43
GEE2063FFG
162.43
GEE2080FFG
286.84
100
125
160
GEE2100FFG
GEE2125FFG
GEB1100FFG
GEB1125FFG
239.76
249.91
286.84
345.49
Depth
76
76
76
76
1
Weight
0.5kg
0.9kg
1.4kg
1.8kg
3 pole (80%~100% x In)
Cat. No.
Price $
1 and 3 pole : Stock Code S
2 and 4 pole : Stock Code I
4 pole (80%~100% x In)
Cat. No.
Price $
GEE3020AFM
GEE3025AFM
GEE3032AFM
GEE3040AFM
GEE3050AFM
GEE3063AFM
GEE3080AFM
401.65
401.65
401.65
401.65
401.65
401.65
555.76
GEE4020AFM
GEE4025AFM
GEE4032AFM
GEE4040AFM
GEE4050AFM
GEE4063AFM
GEE4080AFM
533.84
533.84
533.84
533.84
533.84
533.84
721.98
GEE3100AFM
GEE3125AFM
GEE3160AFM
555.76
628.77
827.28
GEE4100AFM
GEE4125AFM
GEE4160AFM
721.98
812.91
1073.30
all prices listed are ex GST.
Model: GES Icu/Ics = 40/30kA (Single pole is 85/43kA)
Ampere
Rating
Cat. No.
Price $
Cat. No.
Price $
16
GES1016FFG
143.10
GES2016FFG
178.74
20
GES1020FFG
143.10
GES2020FFG
178.74
25
GES1025FFG
143.10
GES2025FFG
178.74
32
GES1032FFG
143.10
GES2032FFG
178.74
40
GES1040FFG
143.10
GES2040FFG
178.74
50
GES1050FFG
143.10
GES2050FFG
178.74
63
GES1063FFG
143.10
GES2063FFG
178.74
80
GES1080FFG
276.91
GES2080FFG
283.06
100
GES1100FFG
276.91
GES2100FFG
315.46
125
GES1125FFG
288.79
GES2125FFG
380.05
160
3 pole (80%~100% x In)
Cat. No.
Price $
4 pole (80%~100% x In)
Cat. No.
Price $
GES3020AFM
GES3025AFM
GES3032AFM
GES3040AFM
GES3050AFM
GES3063AFM
GES3080AFM
GES3100AFM
GES3125AFM
GES3160AFM
GES4020AFM
GES4025AFM
GES4032AFM
GES4040AFM
GES4050AFM
GES4063AFM
GES4080AFM
GES4100AFM
GES4125AFM
GES4160AFM
499.93
499.93
499.93
499.93
499.93
499.93
691.63
691.63
691.63
910.00
661.28
661.28
661.28
661.28
661.28
661.28
894.24
894.24
894.24
1180.44
Model: GEH Icu/Ics = 70/35kA (Single pole is 100/50kA)
Ampere
Rating
Cat. No.
Price $
Cat. No.
Price $
16
GEH1016FFG
180.36
GEH2016FFG
211.14
20
GEH1020FFG
180.36
GEH2020FFG
211.14
25
GEH1025FFG
180.36
GEH2025FFG
211.14
32
GEH1032FFG
180.36
GEH2032FFG
211.14
40
GEH1040FFG
180.36
GEH2040FFG
211.14
3 pole (80%~100% x In)
Cat. No.
Price $
4 pole (80%~100% x In)
Cat. No.
Price $
GEH3020AFM
GEH3025AFM
GEH3032AFM
GEH3040AFM
627.26
627.26
627.26
627.26
GEH4020AFM
GEH4025AFM
GEH4032AFM
GEH4040AFM
826.30
826.30
826.30
826.30
50
63
80
GEH1050FFG
GEH1063FFG
GEH1080FFG
180.36
180.36
349.48
GEH2050FFG
GEH2063FFG
GEH2080FFG
211.14
211.14
404.02
GEH3050AFM
GEH3063AFM
GEH3080AFM
627.26
627.26
780.19
GEH4050AFM
GEH4063AFM
GEH4080AFM
826.30
826.30
1010.77
100
125
GEH1100FFG
GEH1125FFG
349.48
364.06
GEH2100FFG
GEH2125FFG
404.02
453.81
GEH3100AFM
GEH3125AFM
780.19
849.42
GEH4100AFM
GEH4125AFM
1010.77
1102.68
Moulded Case Switches
Ampere
Rating
160
Cat. No.
3 pole
GEK3160KSM
Price $
ex GST
533.84
Cat. No.
4 pole
GEK7160KSM
Stock Code S
Price $
ex GST
696.49
1-15
J Frame 250 Ampere
250A Adjustable Thermal Adjustable Magnetic or Electronic Trip Circuit Breaker.
Field Fit Earth Leakage module available.
Non-auto switch version available.
1
Dimensions (mm)
2 & 3 pole
4 pole
Height
177.80
177.80
Width
105
135.60
Depth
87.4
87.4
Weight
5.2kg
7.0kg
GJ Frame + JT-AA = Thermal Magnetic Breaker
GJ Frame + DigiTrip = Electronic Breaker
Refer to page 1-20 for Magnetic only trip version suitable for Motor Circuit Protection
Interupting
Capacity Icu/Ics
25/25kA
Frame Only (Note 1)
40/40kA
Frame Only (Note 1)
70/70kA
Frame Only (Note 1)
Model: GJ
2 pole
Cat. No.
GJE2250NN
GJS2250NN
GJH2250NN
Price $
ex GST
537.84
632.88
829.44
Trip Unit - Adjustable Magnetic for 2, 3 and 4 pole.
Fixed Thermal for 2 pole. Adjustable Thermal for 3 and
Ampere
Magnetic
2 pole
Rating
Range
Cat. No.
70
350 - 700
JT2070FA
80
400 - 800
90
450 - 900
JT2090FA
100
500 - 1000
JT2100FA
125
625 - 1250
JT2125FA
150
750 - 1500
JT2150FA
160
800 - 1600
175
875 - 1750
JT2175FA
200
225
250
1000 - 2000
1125 - 2250
1250 - 2500
JT2200FA
JT2225FA
JT2250FA
Price $
ex GST
627.48
738.72
968.76
2 pole : Stock Code I
4 pole
Price $
Cat. No.
ex GST
GJE4250NN
814.32
GJS4250NN
960.12
GJH4250NN
1259.28
3 pole (80%~100% x In)
Cat. No.
Price $
4 pole (80%~100% x In)
Cat. No.
Price $
3 pole
Cat. No.
GJE3250NN
GJS3250NN
GJH3250NN
4 pole.
Price $
320 76
320.76
320.76
320.76
320.76
JT3080AA
373.68
JT3100AA
JT3125AA
373.68
373.68
JT4100AA
JT4125AA
489.24
489.24
JT3160AA
373.68
JT4160AA
489.24
JT3200AA
411.48
JT4200AA
536.76
JT3250AA
492.48
JT4250AA
639.36
353.16
353.16
422.28
422.28
Digitrip
Trip Unit - LSI Electronic Trip for 3 and 4 pole. No Rating Plug required.
Ampere
3 pole (40%~100% x In)
Rating
Cat. No.
Price $
3 pole : Stock Code S
4 pole (40%~100% x In)
Cat. No.
Price $
20 ~ 50
40 ~ 100
63 ~ 160
100 ~ 250
JT405032
JT410032
JT416032
JT425032
Long Time Delay: 2 ~ 24 seconds @ 6 x Ir.
Adjustable Short Time Delay: Instantaneous, 120
and 300 ms.
JT305032
JT310032
JT316032
JT325032
989.28
989.28
989.28
989.28
1433.16
1433.16
1433.16
1433.16
Digitrip
Trip Unit - LSIG Electronic Trip for 3 and 4 pole. No Rating Plug required.
Stock Code I
Neutral CT required for 4 wire systems if neutral protection is required.
(see accessories pg
Ampere
3 pole (40%~100% x In)
4 pole (40%~100% x In)
Rating
Cat. No.
Price $
Cat. No.
Price $
20 ~ 50
JT305036
1506.60
JT405036
2150.28
40 ~ 100
JT310036
1506.60
JT410036
2150.28
63 ~ 160
JT316036
1506.60
JT416036
2150.28
and 300 ms.
100 ~ 250
JT325036
1506.60
JT425036
2150.28
250A
1-16
3 pole
Cat. No.
GJK3250KSM
Price $
ex GST
737.64
4 pole
Cat. No.
GJK4250KSM
Stock Code S
Price $
ex GST
962.28
L Frame 630 Ampere
1
630A Adjustable Thermal Adjustable Magnetic or Electronic Trip Circuit Breakers.
Field fit earth leakage modules and non-auto switch versions available.
Dimensions (mm)
3 pole
4 pole
Height
258
258
Width
140
183
Depth
104
104
Weight
7.3kg
9.1kg
GL Frame + LT-AA tripunit = Thermal Magnetic Breaker
GL Frame + LT DigiTrip = Electronic Breaker
1
Model: GL
Interupting
Capacity: Icu/Ics
35/35kA at 415Vac
50/50kA at 415Vac
70/70kA at 415Vac
100/100kA at 415Vac
Trip Units
Frame Only
(See Note 1)
3 pole
Cat. No.
GLE3630NN
GLS3630NN
GLH3630NN
GLC3630NN
Adjustable Thermal and Magnetic
Magnetic
3 pole
Range
Cat. No.
1000 - 2500
LT3250AA
1280 - 3200
LT3320AA
1600 - 4000
LT3400AA
2000 - 5000
LT3500AA
2500 - 6300
LT3630AA
Ampere Rating
200 - 250
256 - 320
320 - 400
400 - 500
500 - 630
Stock
Code
S
S
S
I
Price $
ex GST
1132.92
1339.96
1514.16
1998.00
4 pole
Cat. No.
GLE4630NN
GLS4630NN
GLH4630NN
GLC4630NN
Stock
Code
S
S
S
I
Price $
ex GST
1463.40
1723.68
1973.16
2644.92
Stock
Code
S
S
S
S
S
Price $
ex GST
208.44
208.44
208.44
896.00
896.00
4 pole
Cat. No.
LT4250AA
LT4320AA
LT4400AA
LT4500AA
LT4630AA
Stock
Code
S
S
S
S
S
Price $
ex GST
187.92
187.92
187.92
1150.20
1150.20
Digitrip Trip Unit - LSI Electronic Trip for 3 and 4 pole. No Rating Plug required.
Ampere
Rating
100 - 250
160 - 400
250 - 630
and 300 ms.
3 pole (40%~100% x In)
Cat. No.
Price $
LT325032
788.40
LT340032
788.40
LT363032
1725.84
Stock Code S
4 pole (40%~100% x In)
Cat. No.
Price $
LT425032
905.04
LT440032
905.04
LT463032
2228.04
Digitrip Trip Unit - LSIG Electronic Trip for 3 and 4 pole. No Rating Plug required.
Neutral CT required for 4 wire systems if neutral protection is required.
Ampere
Rating
100 - 250
160 - 400
250 - 630
and 300 ms.
3 pole (40%~100% x In)
Cat. No.
Price $
Stock Code S
4 pole (40%~100% x In)
Cat. No.
Price $
LT325036
LT340036
LT363036
LT425036
LT440036
LT463036
1952.64
1952.64
2701.08
1967.76
1967.76
3025.08
Stock Code S
Ampere Rating
400A
630A
3 pole
Cat. No.
GLK3400KSM
GLK3630KSM
Price $
1556.28
2268.00
4 pole
Cat. No.
GLK4400KSM
GLK4630KSM
Price $
2182.68
2176.28
1-17
Moulded Case Circuit Breaker - Series G
N Frame 1600 Ampere
1
Digitrip 310 Electronic trip unit is standard. Non-auto
Dimensions (mm)
Height
Width
3 pole
406
210
4 pole
406
280
switch versions available.
Depth
Weight
140
21.3kg
140
28.3kg
Electronic Breaker
LSI Trip Unit, Interrupting Capacity (Icu/Ics) = 50/50kA @ 415Vac. Rating Plug included
Ampere Rating
3 pole
Stock
Price $
4 pole
Cat. No.
Code
ex GST
Cat. No.
400 ~ 800A
GNS3800T32WP19
S
3921.48
GNS4800T32WP19
630 ~ 1250A
GNS3125T32WP09
S
7528.68
GNS4125T32WP09
800 ~ 1600A Front
GNSF316T32WP35
S
8416.44
GNSF416T32WP35
800 ~ 1600A Rear
GNS316T32WP35
S
9931.68
GNS416T32WP35
Stock
Code
I
I
I
I
Price $
ex GST
4461.48
8993.16
10123.92
11945.88
LSIG Trip Unit, Interrupting Capacity (Icu/Ics) = 50/50kA @ 415Vac. Rating Plug included
Ampere Rating
3 pole
Stock
Price $
4 pole
Cat. No.
Code
ex GST
Cat. No.
400 ~ 800A
GNS3800T36WP19
I
5546.88
GNS4800T36WP19
630 ~ 1250A
GNS3125T36WP09
I
8881.92
GNS4125T36WP09
800 ~ 1600A Front
GNSF316T36WP35
I
9496.44
GNSF416T36WP35
800 ~ 1600A Rear
GNS316T36WP35
I
11206.08
GNS416T36WP35
Stock
Code
I
I
I
I
Price $
ex GST
6366.60
10074.24
10846.44
12799.08
LSI Trip Unit, Interrupting Capacity (Icu/Ics) = 70/50kA @ 415Vac. Rating
Ampere Rating
3 pole
Stock
Price $
Cat. No.
Code
ex GST
400 ~ 800A
GNH3800T32WP19
S
4064.04
630 ~ 1250A
GNH3125T32WP09
S
7758.72
800 ~ 1600A Front
GNHF316T32WP35
S
8819.28
800 ~ 1600A Rear
GNH316T32WP35
S
10406.88
Stock
Code
I
I
I
I
Price $
ex GST
4637.52
9280.44
10627.20
12539.88
Stock
Code
Price $
ex GST
Plug included
4 pole
Cat. No.
GNH4800T32WP19
GNH4125T32WP09
GNHF416T32WP35
GNH416T32WP35
LSIG Trip Unit, Interrupting Capacity (Icu/Ics) = 70/50kA @ 415Vac. Rating Plug included
Ampere Rating
3 pole
Stock
Price $
4 pole
Cat. No.
Code
ex GST
Cat. No.
400 ~ 800A
630 ~ 1250A
800 ~ 1600A Front
800 ~ 1600A Rear
GNH3800T36WP19
GNH3125T36WP09
GNHF316T36WP35
GNH316T36WP35
Ampere Rating
3 pole
Cat. No.
800
GNK3800KSW
1250
GNK3125KSW
1-18
S
S
S
S
5686.20
9106.56
9894.96
11675.88
GNH4800T36WP19
GNH4125T36WP09
GNHF416T36WP35
GNH416T36WP35
Stock
Code
S
S
Price $
ex GST
3068.28
6517.80
4 pole
Cat. No.
GNK4800KSW
GNK4125KSW
I
I
I
I
7443.36
10362.60
11348.64
13390.92
Stock
Code
I
I
Price $
ex GST
3761.64
7644.24
Moulded Case Circuit Breaker - Series G
R Frame 2500 Ampere
1
Dimensions (mm)
3 pole
4 pole
Height
406
Width
394
Depth
229
Weight
47kg
406
508
229
54kg
Model: GR
LSI Trip Unit, Interrupting Capacity (Icu/Ics) = 70/50kA @ 415Vac - Rating Plug Included
Ampere Rating
800 ~ 1600A
1000 ~ 2000A
1250 ~ 2500A
3 pole
Cat. No.
GRH316T32WP09
GRH320T32WP17
GRH325T32WP40
Stock
Code
I
I
I
Price $
ex GST
12348.72
14967.72
16673.04
4 pole
Cat. No.
GRH416T32WP09
GRH420T32WP17
GRH425T32WP40
Stock
Code
I
I
I
Price $
ex GST
15782.04
19265.04
21534.12
Stock
Code
I
I
I
Price $
ex GST
17946.36
21428.28
23697.36
Stock
Code
I
I
Price $
ex GST
14405.04
17735.76
LSIG Trip Unit, Interrupting Capacity (Icu/Ics) = 70/50kA @ 415Vac - Rating Plug Included
Ampere Rating
800 ~ 1600A
1000 ~ 2000A
1250 ~ 2500A
3 pole
Cat. No.
GRH316T36WP09
GRH320T36WP17
GRH325T36WP40
Stock
Code
I
I
I
Price $
ex GST
14501.16
17132.04
18836.28
4 pole
Cat. No.
GRH416T36WP09
GRH420T36WP17
GRH425T36WP40
Electronic Trip Unit Characteristics
Parameter
Unit of Measure:
L
Adjustable Long Delay Pickup (A) . . . . . . .Settings on the adjustable rating plug
S
Short Time Range (A) . . . . . . . . . . . . . . . .2 to 8 times In
I
Short Time Delay (sec) . . . . . . . . . . . . . . .Instantaneous to 300ms
G
Ground Fault Pickup (A) . . . . . . . . . . . . . .200 to 1200A
Ground Fault Time (sec) . . . . . . . . . . . . . .Instantaneous to 500ms
Ampere Rating
1600
2000
3 pole
Cat. No.
GRK316WK
GRK320WK
Stock
Code
S
S
Price $
ex GST
11126.16
13630.68
4 pole
Cat. No.
GRK416WK
GRK420WK
1-19
Moulded Case Circuit Breaker - Series G Motor
Circuit Protectors
1
The GE and GJ frame breakers are fitted with a rotary selection
cam switch that can be set for varied full load current amps.
The GL and GN frame breakers are fitted with an electronic trip
device
GE Frame HMCP Circuit Breakers - complete assembly with line and load side tunnel terminals - all ratings.
Continuous Motor
HMCP Magnetic Trip Settings - Selected Position and Current Ratings
Current
FLC (Amps) A
B
C
D
E
F
3
0.69 - 2.6
9
15
21
27
30
33
7
1.1 - 6.1
21
35
49
63
70
77
15
3.4 - 13.0
45
75
100
135
150
165
30
3.9 - 26.1
90
150
210
270
300
330
50
11.5 - 43.5
150
250
350
450
500
550
70
16.1 - 60.9
210
350
490
630
700
770
100
23.0 - 87.0
300
500
700
900
1000
1100
150
38.4 - 84.5*
500
700
900
1100
1300
1500
*Note: For special applications only, refer to technical catalogue for more information.
Cat. No.
Stock
Code
HMCPE003A0C
S
HMCPE007C0C
S
HMCPE015E0C
S
HMCPE030H1C
S
HMCPE050K2C
S
HMCPE070M2C
S
HMCPE100R3C
S
HMCPE100T3C
S
Price $
ex GST
720.36
720.36
720.36
720.36
720.36
720.36
720.36
786.24
GJ Frame HMCP - Breaker and Trip Unit Complete
Max.
Current
250
250
250
250
250
250
250
250
Motor
FLC
27.0 - 57.2
34.7 - 73.5
38.5 - 81.6
48.1 - 102
57.7 - 122.4
67.4 - 142.8
77.0 - 163.3
86.6 - 183.6
A
350
450
500
625
750
875
1000
1125
250
96.2 - 204
1250 1405
B
400
505
565
700
840
980
1125
1265
C
440
565
625
780
935
1090
1250
1410
D
480
620
690
860
1030
1200
1375
1545
E
525
680
750
940
1125
1310
1500
1690
1560 1720 1875
F
570
735
810
1020
1220
1420
1625
1830
G
610
790
875
1090
1315
1530
1750
1970
H
660
845
935
1170
1410
1640
1875
2110
I
700
900
1000
1250
1500
1750
2000
2250
2030 2185 2340 2500
Cat. No.
HMCPJ250A5L
HMCPJ250C5L
HMCPJ250D5L
HMCPJ250F5L
HMCPJ250G5L
HMCPJ250J5L
HMCPJ250K5L
HMCPJ250L5L
Stock
Code
S
S
S
S
S
S
S
S
Price $
ex GST
1229.04
1229.04
1229.04
1229.04
1229.04
1352.16
1352.16
1352.16
HMCPJ250W5L
S
1352.16
Stock
Code
I
I
I
I
I
I
I
Price $
ex GST
2568.24
2568.24
2568.24
2568.24
2568.24
3595.32
3595.32
GL Frame HMCP - Breaker and Trip Unit Complete
Max.
Current
600
600
600
600
600
600
600
Motor
FLC
96.2 - 204
115.4 - 244.9
134.7 - 285.7
153.9 - 326.9
173.2 - 367.2
192.4 - 408
230.8 - 507.7
A
1125
1500
1750
2000
2250
2500
3000
B
1266
1688
1969
2250
2531
2813
3375
C
1406
1875
2188
2500
2812
3125
3750
D
1547
2063
2406
2750
3094
3438
4125
E
1688
2250
2625
3000
3375
3750
4500
F
1828
2438
2844
3250
3656
4063
4875
G
1969
2625
3063
3500
3937
4375
5250
H
2109
2813
3281
3750
4218
4688
5625
I
2250
3000
3500
4000
4500
5000
6000
Cat. No.
HMCPL600L6G
HMCPL600N6G
HMCPL600R6G
HMCPL600X6G
HMCPL600Y6G
HMCPL600P6G
HMCPL600M6G
GN Frame HMCP Circuit Breakers - complete assembly with line and load side terminals Continuous Motor
Current
FLC
A
B
C
D
E
F
G
800
123.1 - 553.7 1600 2400
3200
4000
4800
5600 6400
1200
184.6 - 830.7 2400 3600
4800
6000
7200
8400 9600
1-20
all ratings.
Cat. No.
HMCP800X7W
HMCP12Y8W
Stock
Code
I
I
Price $
ex GST
4341.60
6079.32
Moulded Case Circuit Breaker - Series G Accessories
Stock Code S
Connection Accessories
Accessory
Frame
Cat No.
Price $
ex GST
Metric End Cap Kits
GE 3P
M6 capscrews, 1 kit of 3 per pack
EF3RTWK
60.69
For use with busbars
GE 4P
EF4RTWK
65.98
and lugged cables
GJ 3P
FJ3RTWK
66.74
GJ 4P
FJ4RTWK
72.79
GL 3P
L3RTWK
78.19
GL 4P
L4RTWK
88.77
GN
M12 capscrews, 12 per pack
N3RTWK
53.67
Tunnel Terminals
GE
2.5 - 90mm2 cables, Qty 3 per pack
3T125EF
8.53
Cage Clamp Style
GJ
25 - 185mm2 cables, Qty 1 per pack
T250FJ
22.35
For use with bare stranded cables
GL
35 - 240mm2 cables, Qty 1 per pack
TA350LK
78.84
Tunnel Terminals
GE
2.5 - 50mm2 cables, 3 per pack
3TA125EF
25.81
Round hole style
GE
16 - 95mm2 cables, 3 per pack
3TA150EF
32.29
For use with large ferruled cables
GE 3P
35-120mm2 cables, 1 kit of 3 per pack
3TA160EFK
125.28
GE 4P
35-120mm2 cables, 1 kit of 4 per pack
4TA160EFK
165.02
GJ
25-185mm2 cables, 1 per pack
TA250FJ
27.86
GL 3P
400A, 240-380mm2, 1 kit of 3 per pack
3TA631LK
206.28
GL 4P
400A, 240-380mm2, 1 kit of 4 per pack
4TA631LK
339.22
GL 3P
630A, 2 x 35-240mm2, 1 kit of 3 per pack
3TA632LK
312.44
Tunnel Terminals
Parallel connection style
GL 4P
630A, 2 x 35-240mm2, 1 kit of 4 per pack
4TA632LK
528.33
For connection of cables in parallel
GN
1250A, 3 x 120-300mm2, 1 per pack
TA1200NB3M
201.09
GR
1600A, 4 x 300-500mm2, 1 per pack
T1600RDM
371.41
GR
1600A, 4 x 50-300mm2, 1 per pack
TA1600RDM
370.50
GR
2000A, 6 x 35-300mm2, 3 per pack
TA2000RDM
2427.84
GE, 3P
3 x 2.5-35mm2 cables, 1 kit of 3 per pack
3TA125E3K
125.92
Tunnel Terminals
9
Additional Description
Multipole connection style
GE, 3P
6 x 2.5-10mm2 cables, 1 kit of 3 per pack
3TA125E6K
132.73
For distribution to subcircuits direct
GJ, 3P
3 x 2.5-35mm2 cables, 3 per pack
3TA250FJ3
160.16
from load terminals
GJ, 3P
6 x 2.5-10mm2 cables, 3 per pack
3TA250FJ6
160.16
Terminal Extensions
GE 3P
3 per pack
EFTES3
43.63
GE 4P
4 per pack
EFTES4
53.46
GJ 3P
3 per pack
FJTES3
43.63
Spreader bars
Rear Connectors
GJ 4P
4 per pack
FJTES4
53.46
GL 3P
3 per pack
LGTES3
71.17
GL 4P
4 per pack
LGTES4
87.15
GN 3P
1250A, 3 per pack
N12TES3
285.00
GN 4P
1120A, 4 per pack
N12TES4
360.00
GN 3P
1600A line side, 3 per pack
N16TES3A
482.00
GN 3P
1600A load side, 3 per pack
N16TES3B
482.00
GE 3P
25mm to 35mm centres
EFTEW3
52.16
GE 4P
25mm to 35mm centres
EFTEW4
65.55
GJ 3P
35 to 45mm centres
FJTEW3
52.16
GJ 4P
35 to 45mm centres
FJTEW4
65.55
GL 3P
45 to 55mm centres
LGTEW3
115.56
GL 4P
45 to 55mm centres
LGTEW4
157.57
GE
1 x Long connection
EFRCSWL
31.75
GE
1 x Short connection
EFRCSWS
25.48
GJ
1 x Long connection
FJRCSWL
31.75
GJ
1 x Short connection
FJRCSWS
25.48
GL 3P
1kit of 2 x Short + 1 x Long
LRCS3WK
184.50
GL 4P
1kit of 2 x Short + 2 x Long
LRCS4WK
251.20
1
Note: Parts indicated as being supplied as a kit include the appropriate number of connections, plus other additional items such as the retaining
cover supplied with the metric end cap kits, or the terminal shields supplied with tunnel terminals.
1-21
Mounting and Protection Accessories
1
Accessory
Terminal Shields
End Covers
Interphase Barriers
Plug In bases
Plug In Interlock
Stock Code S
Price $
ex GST
Cat No.
GE 3P
2 per pack
EFTS3K
GE 4P
2 per pack
EFTS4K
52.16
GJ 3P
2 per pack
FJTS3K
24.08
GJ 4P
2 per pack
FJTS4K
26.13
GL 3P
2 per pack
LTS3K
105.84
GL 4P
2 per pack
NT53K
113.40
GE 3P
6.4mm opening
EEC3K
26.08
GE 4P
10.4mm opening
EEC4K
26.08
GE
2 per pack
EIPBK
10.90
GJ 3P
2 per pack
FJIPBK
10.90
GJ 4P
3 per pack
FJIPBK4
16.30
GL 3P
2 per pack
IPB3
15.98
GL 4P
3 per pack
IPB34
24.08
GN 3P
2 per pack
IPB5
80.02
GE 3P
Includes rear connectors & trip interlock
PAD3E
336.09
GE 4P
PAD4E
402.84
GJ 3P
PAD3J
336.09
Frame
47.95
GJ 4P
PAD4J
402.84
GL 3P
PAD3L
831.60
GL 4P
PAD4L
998.56
GE
Spare only, normally included with base
PIILEG
17.06
GJ
PIILJG
17.06
GL
PIILLG
41.58
The New
Series G
Moulded Case
Circuit Breakers
The first true world-class circuit breaker family,
the Eaton Series G Moulded Case Circuit
Breakers provide increased performance in
considerably less space than standard circuit
breakers or comparable fusible devices. The
EATON Series G family includes five frame
sizes in ratings from 15 to 2500 amperes and
offers a choice of several interrupting
capacities up to 100 kA at 480 volts ac (200kA at
240 volts ac).
Other advantages include:
• High levels of cascading and discrimination
across the range
• Average 35% size reduction: the smallest 160A
circuit breaker with up to 70kA Icu rating
• The best contact design in circuit breaker
industry
• Common field-installable internal accessories
• Electronic trip units from 20 to 2500 amperes
(including the 250A size breaker)
• IEC-rated, 30 mA earth leakage modules
• Built-in ground fault protection down to 20
amperes
For further Information:
1300 332 866
www.eatonelectric.com.au
Electrical Accessories
Accessory
Stock Code S
Cat No.
Frame
Auxiliary Switches
GE, GJ & GL
1 x C/O Switch, Right Mounting
AUX1A1BPK
78.73
Indication of On/Off position
GE, GJ & GL
AUX2A2BPK
134.67
GN
1 x C/O Switch, Either Side Mounting
A1X5PK
78.73
GN
A2X5PK
134.67
GN
A3X5PK
228.20
GR
A2X6RPK
134.67
Alarm Switches
GE
ALM1M1BEPK
78.73
Indication of Tripped position
GE
ALM2M2BEPK
134.67
GJ & GL
ALM1M1BJPK
78.73
GJ & GL
ALM2M2BJPK
134.67
GN
1 x C/O Switch, Left Mounting
A1L5LPK
78.73
GN
A1L5RPK
78.73
GN
A2L5LPK
134.67
134.67
GN
A2L5RPK
GR
A1L6RPK
78.73
GR
A2L6RPK
134.67
Combined Auxiliary/
GE
2x C/O Switch, Right Mounting
AUXALRMEPK
127.76
Alarm Switches
GJ & GL
AUXALRMJPK
127.76
Indication of On/Off and
GN
AA115LPK
127.76
Tripped position
GN
AA115RPK
127.76
GN
AA215LPK
395.60
395.60
GN
AA215RPK
Shunt Trips
GE, GJ & GL
120-240Vac, Left Mounting
SNT120CPK
188.13
Trips the breaker when
GE, GJ & GL
24-48Vdc, Left Mounting
SNT060CPK
188.13
power is applied
GE, GJ & GL
SNT480CPK
188.13
GN
SNT5LP11K
229.28
GN
24Vdc, Left Mounting
SNT5LP03K
229.28
GN
48Vdc, Left Mounting
SNT5LP23K
229.28
GN
220-250Vdc or 380-440Vac, Left Mounting
SNT5LP14K
229.28
Low Energy Shunt Trips
GN
600Vac, Left Mounting
SNT5LP18K
229.28
GR
SNT6P11K
229.28
GR
24Vdc, Right Mounting
SNT6P03K
229.28
GR
48Vdc, Right Mounting
SNT6P23K
229.28
GR
220-250Vdc or 380-440Vac, Right Mounting
SNT6P14K
229.28
GN
600Vac, Right Mounting
SNT6P184K
229.28
GN
LST5LPK
275.40
GR
480-600Vac, Right Mounting
LST6RPK
275.40
Undervoltage Releases
GE, GJ & GL
24Vac or 24Vdc, Left Mounting
UVR024CPK
242.67
Trips the breaker when
GE, GJ & GL
UVR240APK
242.67
242.67
power is removed
GE, GJ & GL
UVR480APK
GN
24Vac or 24Vdc, Left Mounting
UVH5LP21K
270.10
GN
UVH5LP11K
270.10
GN
UVH5LP29K
270.10
GR
24Vac or 24Vdc, Right Mounting
UVH6RP21K
270.10
GR
UVH6RP11K
270.10
GR
UVH6RP29K
250.10
1
Price $
ex GST
1-23
1
Handle and Operating Accesories
Stock Code S
Price $
ex GST
Accessory
Frame
Cat No.
Direct Rotary Handles
GE
Black handle without door interlock
EHMCCB
126.25
GE
Black handle with door interlock
EHMCCBI
127.87
OFF/O
Trip
GE
Red handle without door interlock
EHMCCR
151.74
GJ
JHMCCB
126.25
GJ
JHMCCR
151.74
GL
LHMCCB
188.78
GJ
LHMCCR
226.58
GN
HMVD5B
282.74
GR
HMVD6B
282.74
ON/I
Extended Rotary Handles
OFF/O
GE
Black Handle, 300mm shaft
EHMVD12B
189.21
GJ
FJHMVD12B
189.21
GL
KLHMVD12B
252.39
GN
WHM5R12
289.98
GR
HMVD6B
282.74
GL
1 per pack
HEXLG
66.31
GN
1 per pack
HEX5
178.84
GR
1 per pack
HEX6
178.84
Trip
ON/I
Handle Extensions
Flexible Shaft Mechanisms
GE
1.2 metre flex shaft
EHMFS04
617.32
GJ
JHMFS04
617.32
GL
LHMFS04
825.76
GN
F5S04CI
606.85
GR
F6S04
946.62
GE
1 per pack
EFPHB
30.99
GN
1 per pack
LKD4
133.48
GE
1 per pack
EFPHBOFF
30.99
30.99
ON
OFF
Fixed Padlock Adaptors
Fixed Padlock Adaptors
Off Only
Removable Padlock Hasp
1-24
GJ
1 per pack
FJPHBOFF
GL
1 per pack
LBHPOFF
30.99
GE
1 per pack
EFPHL
88.56
GJ
1 per pack
FJPHL
88.56
GL
1 per pack
LPHL
124.09
GN
1 per pack
PLK5
202.60
GR
1 per pack
HLK6
202.60
Removable Padlock Hasp
GE
1 per pack
EFPHLOFF
88.56
Off Only
GJ
1 per pack
FJPHLOFF
88.56
124.09
GL
1 per pack
LPHLOFF
Key Interlock Adaptor
GJ
1 per pack
KYKFJ
77.22
Suits shot-bolt type locks
GL
1 per pack
KYKL
169.88
GN
1 per pack
KYK4
275.40
GR
1 per pack
KYK6
275.40
Other Accessories
Stock Code S
Frame
Accessory
Cat No.
Price $
ex GST
Earth Leakage Devices GJ 3P
250A rating, 30mA - 10A sensitivity
ELJBE3250W
1917.10
GJ 4P
ELJBE4250W
2013.01
GL 3P
ELLBE3400W
2226.63
GL 4P
ELLBE4400W
2337.98
GL 3P
ELLBE3630W
2226.63
GL 4P
ELLBE4630W
2338.08
Test Kit
GJ & GL
For testing Digitrip 310 + trip units
MTST230V
1986.28
Secondary Injection
GN & GR
For testing Digitrip 310 trip units
STK2
2207.08
WARNING
reset
test
Neutral CTs
GJ
50A
JGFCT050
306.28
Required if Ground
GJ
100A
JGFCT100
306.28
Fault protection
GJ
160A
JGFCT160
306.28
is required on a system
GJ
250A
JGFCT250
306.28
with a distributed neutral
GL
250A
LGFCT250
448.20
DIN Mounting Adaptor
Remote Indication
Current and Last Trip
GL
400A
LGFCT400
448.20
GL
630, 600A
LGFCT600
550.36
GE 3P & 4P
For mounting on 35mm DIN Rail
EF34DIN
14.47
GJ & GL
Suits Digitrip 310+ electronic trip
DIGIVIEW
986.25
units only
Indication
1-25
1
1
Stock Code S
Other Accessories
Accessory
I
ON
Frame
Price $
ex GST
Cat No.
Motor Operators
GE
24-48Vdc
EOPEG48D
740.12
For remote opening
GE
120-240Vac
EOPEG240C
616.46
and closing of circuit
GJ
24Vdc
EOPFJ24D
1595.70
breakers
GJ
48Vdc
EOPFJ48D
1595.70
GJ
120-240Vac
EOPFJ240C
1331.10
GL
24Vdc
EOPLG24D
2073.60
GL
48Vdc
EOPLG48D
2073.60
GL
120-240Vac
EOPLG40C
1945.00
GN
24Vdc
EOP5T21
2631.52
GN
48Vdc
EOP5T22
2631.52
GN
125Vdc
EOP5T26
2631.52
GN
120Vac
EOP5T07
2631.52
GN
240Vac
EOP5T11
2631.52
GR
24Vdc
EOP6T19K
2631.52
GR
48Vdc
EOP6T21K
2631.52
GR
120Vac
EOP6T08K
2631.52
GR
240Vac
EOP6T11K
2631.52
GE
Front mounted
EFSBI
283.93
For manually interlocking GJ
Front mounted
FJSBI
283.93
306.93
OFF
O
Sliding Bar Interlocks
of two manually
1-26
GL
Front mounted
LGSBI
operated circuit breakers GN
Front mounted
SBK5
368.92
Walking Beam
GJ 3P/3P
Rear mounted
JG3WBI
475.63
Interlocks
GJ 4P/4P
Rear mounted
JG4WBI
475.63
GL 3P/3P
Rear mounted
LG3WBI
840.88
GL 4P/4P
Rear mounted
LG4WBI
840.88
GN
Rear mounted
WBL5
1395.36
GR
Rear mounted
WBL6
1513.08
Circuit Breaker Frames
GJ 3P
Add W02 Suffix
GJS3250NNW02
752.76
to Suit Walking Beam
GJ 4P
Add W03 Suffix
GJS4250NNW03
960.10
Interlocks
GJ 3P
Add W02 Suffix
GJH3250NNW02
968.80
GJ 4P
Add W03 Suffix
GJH4250NNW03
1259.28
GL3P
Add W02 Suffix
GLS3630NNW02
1336.00
GL 4P
Add W04 Suffix
GLS4630NNW04
1723.70
GL 3P
Add W02 Suffix
GLH3630NNW02
1514.16
GL 4P
Add W04 Suffix
GLH4630NNW04
1973.16
GN
Factory modification to standard part
Transfer Switches
Eaton manufacture a wide range of transfer switches, customised to suit your needs. Manual Transfer Switches (MTS),
Basic Transfer Switches (BTS) and Automatic Transfer Switches (ATS) can be assembled using either Series C MCCB,
Series G MCCB or Magnum ACB as the switching mechanism. Enclosed versions are also available
1
Two photos of an example customised solution supplied to a customer. This unit has a
single handle 160A Series C switch mechanism with an ATC300 Logic controller.
Single Handle Series C
Two Motor 630A Series G
Two Motor 1250A Series G
ATC300 Controller
The ATC300 Controller is a full function panel mount transfer switch controller. All
settings are adjustable through the front face with values displayed on two line LCD
display.
Stock Code S
Ampere
10kA 30mA
Price $
Rating
Cat. No.
ex GST
ATC300 Transfer Switch Controller
ATC300
2103.84
240VAC/110VAC Control Transformers
1542-4008/1
86.07
4 Position CAM Switch
1542-4009/1
228.09
5 Position CAM Switch
1542-4009/2
228.09
1-27
Magnum Power Breakers
Magnum Air Circuit Breakers
Available in three physical frame sizes covering nine continuous current ranges.
Intelligent Digitrip electronic relays offer excellent coordination as well as diagnostic
and communications options and zone interlocking.
1
Approvals
Dimensions
3 Pole Breaker MWN
3 Pole Cradle MWN
3 Pole Breaker MWI
3 Pole Cradle MWI
IEC947-2 with KEMA/KEUR
Height
Width
800-2000A 416.56mm 317.73mm
800-2000A 524mm
336mm
800-3200A 416.56mm 414.02mm
4000-6300A 416.56mm 868.68mm
800-3200A 483.88mm**416.50mm
4000-6300A 483.88mm**889.35mm
Depth
371.91mm
474mm
391.16mm*
391.16mm*
460.11mm
460.11mm
*Draw-out breaker with finger clusters
**If vertical adaptors are used, add 39.81mm to the depth
3 pole FIXED style
Maximum
Current
Rated
Operation
Voltage
Interrupting
Capacity
Icu/Ics
Withstand
Rating
Cat. No.
1 sec : Icw
Selection
Table Format
(First 14 code)
- with Digitrip 520 LSI Trip Unit
800
690
1250
690
1600
690
50/50kA
50/50kA
50/50kA
50kA
50kA
50kA
75N5083FLSI
75N5123FLSI
75N5163FLSI
2000
690
50/50kA
50kA
1600
2000
690
690
65/65kA
65/65kA
800
1250
1600
2000
2500
3200
690
690
690
690
690
690
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
Stock
Code
Price $
ex GST
MWN5083HEA0852
MWN5123HEA1252
MWN5163HEA1652
Q
Q
Q
5529.60
5832.00
6210.00
75N5203FLSI
MWN5203HEA2052
Q
7322.40
65kA
65kA
75N6163FLSI
75N6203FLSI
MWN6163HEA1652
MWN6203HEA2052
Q
Q
6642.00
7819.20
65kA
65kA
65kA
65kA
65kA
65kA
75S6083FLSI
75S6123FLSI
75S6163FLSI
75S6203FLSI
75S6253FLSI
75S6323FLSI
MWI6083HEA0852
MWI6123HEA1252
MWI6163HEA1652
MWI6203HEA2052
MWI6253HEA2552
MWI6323HEA3252
Q
Q
Q
Q
Q
Q
6771.60
6825.60
7300.80
8478.00
8769.60
13975.20
- with Digitrip 520i LSIG Trip Unit (excluding NCT*)
800
690
50/50kA
50kA
1250
690
50/50kA
50kA
1600
690
50/50kA
50kA
2000
690
50/50kA
50kA
75N5083FLSIG
75N5123FLSIG
75N5163FLSIG
75N5203FLSIG
MWN5083HEA085W
MWN5123HEA125W
MWN5163HEA165W
MWN5203HEA205W
Q
Q
Q
Q
6328.80
6620.40
6998.40
8110.80
1600
690
65/65kA
65kA
75N6163FLSIG
MWN6163HEA165W
Q
7419.60
2000
690
65/65kA
65kA
75N6203FLSIG
MWN6203HEA205W
Q
8607.60
800
1250
1600
2000
2500
690
690
690
690
690
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
65kA
65kA
65kA
65kA
65kA
75S6083FLSIG
75S6123FLSIG
75S6163FLSIG
75S6203FLSIG
75S6253FLSIG
MWI6083HEA085W
MWI6123HEA125W
MWI6163HEA165W
MWI6203HEA205W
MWI6253HEA255W
Q
Q
Q
Q
Q
7560.00
7614.00
8110.80
9266.40
9676.80
3200
690
65/65kA
65kA
75S6323FLSIG
MWI6323HEA325W
Q
14774.40
1-28
Discount Schedule POA
Magnum Low Voltage Power Breakers
1
• 100% thermally rated when fully enclosed
• Thermal memory as well as high temperature trip(85 C)
o
• Common accessories across the whole range - many field fittable
• All kA ratings at 690Vac with 1100Vac available on request
• Two-step stored energy mechanism
• Additional protection units available with metering and communications
• Category “B” - high withstand ratings (Icw)
3 pole DRAWOUT style - including shutters, secondary terminals wired.
Maximum
Current
Rated
Operation
Voltage
Interrupting
Capacity
Icu/Ics
Withstand
Rating
1 sec : Icw
Cat. No.
Selection
Table Format
(First 14 code)
- with Digitrip 520 LSI Trip Unit
800
690
1250
690
1600
690
50/50kA
50/50kA
50/50kA
50kA
50kA
50kA
75N5083DLSI
75N5123DLSI
75N5163DLSI
2000
690
50/50kA
50kA
1600
2000
690
690
65/65kA
65/65kA
800
1250
1600
2000
2500
3200
690
690
690
690
690
690
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
Stock
Code
Price $
ex GST
MWN5083LEA-0852
MWN5123LEA-1252
MWN5163LEA-1652
Q
Q
Q
8499.60
8812.80
9482.40
75N5203DLSI
MWN5203LEA-2052
Q
10537.20
65kA
65kA
75N6163DLSI
75N6203DLSI
MWN6163LEA-1652
MWN6203LEA-2052
Q
Q
10432.80
10908.00
65kA
65kA
65kA
65kA
65kA
65kA
75S6083DLSI
75S6123DLSI
75S6163DLSI
75S6203DLSI
75S6253DLSI
75S6323DLSI
MWI6083LEA-0852
MWI6123LEA-1252
MWI6163LEA-1652
MWI6203LEA-2052
MWI6253LEA-2552
MWI6323LEA-3252
Q
Q
Q
Q
Q
Q
10184.40
10443.60
11145.60
11620.80
12128.40
24008.40
- with Digitrip 520i LSIG Trip Unit (excluding NCT*)
800
690
50/50kA
50kA
1250
690
50/50kA
50kA
1600
690
50/50kA
50kA
2000
690
50/50kA
50kA
75N5083DLSIG
75N5123DLSIG
75N5163DLSIG
75N5203DLSIG
MWN5083LEA-085W
MWN5123LEA-125W
MWN5163LEA-165W
MWN5203LEA-205W
Q
Q
Q
Q
9288.00
9612.00
10519.20
11361.60
1600
690
65/65kA
65kA
75N6163DLSIG
MWN6163LEA-165W
Q
11232.00
2000
690
65/65kA
65kA
75N6203DLSIG
MWN6203LEA-205W
Q
11696.40
800
1250
1600
2000
2500
3200
690
690
690
690
690
690
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
65/65kA
65kA
65kA
65kA
65kA
65kA
65kA
75S6083DLSIG
75S6123DLSIG
75S6163DLSIG
75S6203DLSIG
75S6253DLSIG
75S6323DLSIG
MWI6083LEA-085W
MWI6123LEA-125W
MWI6163LEA-165W
MWI6203LEA-205W
MWI6253LEA-255W
MWI6323LEA-325W
Q
Q
Q
Q
Q
Q
10972.80
11292.80
11944.80
12484.80
12916.80
24796.80
75NCT_ _ _
9253C03H_ _
* External NCT
for use with LSIG integral trip unit.
Q
594.00
85kA and 100kA versions also available.
4000A, 5000A and 6300A ratings also available.
4 pole styles also available.
Advanced function electronic trip units are optional: Digitrip 520M, 520Mi, 1150 and 1150i.
ANSI NEMA product also available.
1100V 25kA upto 3200A also available.
1-29
Magnum Circuit Breakers - Accessories
1
Shunt trip kit (a)
(AC : 50/60Hz)
Cat.
No.
Stock
Code
Selection
Table Format
Price $
ex GST
15
198.72
198.72
198.72
198.72
16
924.48
924.48
924.48
924.48
924.48
924.48
110/127 Vac/dc
208/250 Vac/dc
24 Vdc
48 Vdc
75SHT120U
75SHT240U
75SHT24D
75SHT48D
S
S
S
S
110/125 Vac
220/250 Vac
24 Vdc
48 Vdc
110/125 Vdc
220/250 Vdc
75MOT120A
75MOT240A
75MOT24D
75MOT48D
75MOT120D
75MOT240D
I
I
I
S
I
I
110/127 Vac/dc
208/250Vac/dc
75SPR120U
75SPR240U
S
S
24 Vdc
48 Vdc
75SPR24D
75SPR48D
I
I
198.72
198.72
75UVR120A
75UVR240A
75UVR24D
75UVR48D
75UVR120D
75UVR240D
75UVR32D
75UVR415A
75UVR480A
75UVR600A
S
S
I
I
I
I
I
I
I
I
362.88
362.88
362.88
362.88
362.88
362.88
362.88
362.88
362.88
362.88
75MTDUVR120V
75MTDUVR240V
I
I
Auxiliary switches 2a,2b kit (b)
Bell alarm / OTS kit
Padlockable Pushbutton Metal cover kit
75AUX2
75BAOTSMTIK
75COVM
S
S
S
Operation counter kit
IP54 Door Cover Kit
Qty 15 6-Point Secondary Terminal Blocks With Labels
Qty 90 Wires for Connecting Secondary Blocks
Qty 30 Wires 40 Inches Long for Fixed ACB Connecting
Secondary Blocks
75COUNT
75MDESC
75MSECBK
75MSECWR
S
S
S
S
75MWK40
S
205.20
75MSECTOOL
S
132.84
Motor operator kit - 5 sec. operating time (AC : 50/60Hz)
Spring release kit (a)
(AC : 50/60Hz)
Undervoltage release kit - Instantaneous release type - (a)
(AC : 50/60Hz)
110/127 Vac
208/240 Vac
24 Vdc
48 Vdc
110 - 125 Vdc
220 - 250 Vdc
32 Vdc
380 - 415 Vac
480 Vac
600 Vac
17
18
198.72
198.72
Time Delay Module UVR
120Vac
240Vac
Qty 12 Wires, Qty 2 6-Point Terminal Bocks, & 1 AMP
Removal Tool
601.15
601.15
19
20
21
22
92.88
198.72
132.84
263.52
330.48
184.68
118.80
Note (a) These items are also field fittable.
Note (b) This item is also field fittable. Conditions: 4a/4b max for MWN and 6a6b max for MWI.
1-30
2
3
4
5
7. Poles
3 = Three
4 = Four
MWI only
40 = 4000 ABCABC
50 = 5000 ABCABC
63 = 6300 ABCABC
4N = 4000 AABBCC
5N = 5000 AABBCC
6N = 6300 AABBCC
MWI and MWK only
25 = 2500
32 = 3200
5 & 6. Continuous Amperes
(Ampere Frame - Busbar rating)
MWI, MWN and MWK
08 = 800
12 = 1250
16 = 1600
20 = 2000
4. Interrupt/Withstanding
4 = 40/40 (MWN only)
5 = 50/50 (MWN only)
6 = 65/65 (MWI & MWN)
8 = 85/85 (MWI only)
C = 100/85 - 100/100 (MWI)
E = 150/100 (MWI only)
Note: MWK is 25kA at 1100V
3. Type
I = Standard IEC Frame
K = (1100V)
N = Narrow Frame
M W
1
6
8
E
9
MWI only
40 = 4000
50 = 5000
63 = 6300
MWI and MWK only
25 = 2500
30 = 3000
32 = 3200
11 & 12. Sensor/Plugs
MWI, MWN and MWK
NN = None
02 = 200
08 = 800
05 = 250
10 = 1000
03 = 300
12 = 1200
04 = 400
13 = 1250
06 = 600
16 = 1600
07 = 630
20 = 2000
9. Nameplate Language
E = English
A = Spanish
F = French (Future)
C = Chinese (Future)
P = Portugese (Future)
A
10
8. Mounting
Configuration
F = Fixed Front
H = Fixed Horizontal
V = Fixed Vertical
L = Drawout Horizontal
7
12
13
14
15
15. Shunt Trip
N = None
A = 110/127Vac/Vdc
R = 208/240Vac/Vdc
C = 24Vdc
H = 48 Vdc
13 & 14. Trip Unit
NN = Unprotected
22 = 220 LI
52 = 520 LSI
5W = 520i LSIG
M2 = 520M LSI
MT = 520M LSI 24/48 Vdc
MU = 520M LSI 120Vac
MV = 520M LSI 240Vac
MW = 520Mi LSIG
MJ = 520Mi LSIG 24/48 Vdc
MK = 520Mi LSIG 120Vac
ML = 520Mi LSIG 240Vac
ME = 520M LSIA 24/48 Vdc
MC = 520M LSIA 120Vac
MF = 520M LSIA 240Vac
CU = 520MC LSI 120Vac
CV = 520MC LSI 240Vac
CT = 520MC LSI 24/48Vdc
CK = 520MCi LSIG 120Vac
CL = 520MCi LSIG 240Vac
CJ = 520MCi LSIG 24/48 Vdc
CC = 520MC LSIA 120Vac
CF = 520MC LSIA 240Vac
CE = 520MC LSIA 24/48Vdc
1W = 1150i LSI 24/48 Vdc *
1N = 1150i LSI 120Vac *
1P = 1150i LSI 240Vac *
1R = 1150i LSIG/A 24/48 Vdc *
1S = 1150i LSIG/A 120Vac *
1T = 1150i LSIG/A 240Vac *
13 & 14 - * Note: 1150i NOT
available for MWN frame.
11
17
18
19
20
19. Auxillary Switch
N = None
2 = 2A/2B
4 = 4A/4B
6 = 6A/6B *
19 - * Note: 6A/6B NOT
available for MWN frame.
18. UVR/Second ST
N = None
A = 110/127Vac I
R = 208/240Vac I
C = 24Vdc I
H = 48Vdc I
E = 110/125Vdc I
F = 220/250Vdc I
G = 32Vdc I
X = 380/415Vac I
J = 480Vac I
K = 600Vac I
1 = 110/127 Vac/dc 2nd ST
2 = 208/240Vac/dc 2nd ST
3 = 24Vdc 2nd St
4 = 48Vdc 2nd ST
17. Spring Release
N = None
A = 110/127Vac/dc
R = 208/240Vac/dc
C = 24Vdc
H = 48 Vdc
16. Motor Operator
M = Manual Operated
N = 110/125Vac 5 sec
W = 110/125 Vdc 5 sec
T = 220/250 Vdc 5 sec
P = 220/250Vac 5 sec
L = 24 Vdc 5 sec
K = 48 Vdc 5 sec
16
22
23
24
X
25
*W version is standard for all drawout breakers.
24. Shipping Instructions
A = Breaker Alone
C = Breaker and cassette
P = Breaker in prewired cassette
S = Breaker in cassette + shutters
W = Breaker in prewired (secondary
terminals) cassette with shutters
23. Latch Check Switch/Load Side
Voltmeter
LCS
Metering TU Volt. Configured
Connection (520M. 520MC, or 1150)
N = None
Standard
M = None Load Side Voltage Metering
L = SR
Standard
Y = SR
Load Side Voltage Metering
C = Cust
Standard
D = Cust Load Side Voltage Metering
22. Operations Counter
/ Keylock Adaptor
X
CNTR
Keylock
N
None
None
K
None
Kirk
C
None
Castell
R
None
Ronis
A
Cntr
None
Y
Cntr
Kirk
L
Cntr
Castell
H
Cntr
Ronis
21. Padlocks
N = None
M = Metal
P = Plastic
C = Close PB Metal
H = Close PB Plastic
20. OTS/Bell Alarm
N = None - with Trip Indicator
E = None - Without Trip Indicat.
Y = 2 Form C
21
Magnum Selection Chart
Complete the final style number , selecting from the 18 tables shown
1-31
1
“The Rock” 1100V Mining Circuit Breakers
Eaton continues a long tradition as a leader in mining applications with state-of-the-art
E2 mining circuit breakers. All breakers are rated at 1100Vac.
1
Thermal setting
fixed (E2FM)
adjustable (all others)
fixed (E2FM)
adjustable (all others)
Magnetic setting
Interrupting capacity
Dimensions
E2FM
E2JM
E2KM
E2LM
E2NM
E2RM
see below
Height
153mm
254mm
257mm
273mm
406mm
406mm
Width
105mm
105mm
140mm
210mm
210mm
395mm
Depth
86mm
103mm
103mm
103mm
140mm
230mm
Weight
2.3kg
4.0kg
5.0kg
9.0kg
23.0kg
47.0kg
1100V Mining Circuit Breakers - F frame
Current
Rating
PSCC
at 1000V
PSCC
at 1100V
16
20
25
32
40
50
63
80
100
10kA
10kA
10kA
10kA
10kA
10kA
10kA
10kA
10kA
7.5kA
7.5kA
7.5kA
7.5kA
7.5kA
7.5kA
7.5kA
7.5kA
7.5kA
125
160
10kA
10kA
7.5kA
7.5kA
Stock
Code
Price $
ex GST
E2FM3016
E2FM3020
E2FM3025
E2FM3032
E2FM3040
E2FM3050
E2FM3063
E2FM3080
E2FM3100
S
S
S
S
S
S
S
S
S
1631.88
1631.88
1631.88
1631.88
1631.88
1631.88
1631.88
1631.88
1631.88
E2FM3125
E2FM3160
S
S
2431.08
2431.08
Stock
Code
Price $
ex GST
I
I
2431.08
2717.28
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
17.49
122.90
157.46
157.46
209.95
209.95
264.60
383.40
383.40
Cat. No.
Magnetic Only Adjustable - F frame
Cat. No.
Magnetic only trip 150 to 500A
Magnetic only trip 300 to 1000A
E2FM100KM
E2FM100RM
Accessory - F frame
Cat. No.
Interphase barriers (2)
Terminal shields (2)
Alarm switch
Auxiliary switch
Auxiliary switch, 2 pole Left Hand mount
Auxiliary switch, 2 pole Right Hand mount
Combination auxiliary/alarm switch
Shunt trip, 9-24Vac, 12-24Vdc
IPB1
TSF
A1L1LPK
A1X1PK
A2X1LPK
A2X1RPK
AAL1LPK
SNT1RP03K
SNT1RP08K
Under-voltage release, 24Vac
SNT1RP12K
S
383.40
SNT1RP18K
UVH1RP03K
S
S
383.40
383.40
Under-voltage release, 24Vdc
Under-voltage release, 48-60Vac
UVH1RP21K
UVH1RP05K
S
S
383.40
383.40
UVH1RP08K
UVH1RP11K
S
S
383.40
383.40
Solenoid operator, 240Vac, EOP1T11
UVH1RP15K
373/1117
S
S
383.40
934.20
1-32
Accessory - F frame (Continued)
Cat. No.
Padlockable handle lock, 1 pole
Padlockable handle lock hasp (2,3,4 pole only)
Non-padlockable handle block
"F" LH Lock OFF only hasp
Keeper Nut Kit FW/HFW/HFB
Rotary handle kit - metal handle with mechanism and 30cm shaft - IP65
373/1128
373/1121
373/1126
PLK1LOFF
1517-2021/1
WHM1R12
Stock
Code
Price $
ex GST
S
S
S
S
S
S
58.75
58.75
14.90
113.40
38.66
304.56
Stock
Code
Price $
ex GST
S
2508.84
Stock
Code
Price $
ex GST
S
S
S
S
221.83
221.83
221.83
221.83
1
1100V Mining Circuit Breaker - J frame
Description
PSCC
at 1000V
PSCC
at 1100V
Cat. No.
100-250A J Frame
10kA
8kA
E2JM3250F
Trip Unit - (thermal magnetic)
Ampere Rating
Cat. No.
100-125
125-160
160-200
200-250
JT3125TA
JT3160TA
JT3200TA
JT3250TA
J Frame Magnetic only Trip Unit
Motor
FLC
Max.HMCP Magnetic Trip Settings - Selected Position and Current Ratings
Current
A
B
C
D
E
F
G
Price ex GST $168.90
Stock
Cat. No.
Code
H
I
27.0 - 57.2A
34.7 - 73.5A
38.5 - 81.6A
48.1 - 102.0A
57.7 - 122.4A
67.4 - 142.8A
250
250
250
250
250
250
350
450
500
625
750
875
400
505
565
700
840
980
440
565
625
780
935
1090
480
620
690
860
1030
1200
525
680
750
940
1125
1310
570
735
810
1020
1220
1420
610
790
875
1090
1315
1530
660
845
935
1170
1410
1640
700
900
1000
1250
1500
1750
77.0 - 163.3A
86.6 - 183.6A
96.2 - 204.0A
250
250
250
1000
1125
1250
1125
1265
1405
1250
1410
1560
1375
1545
1720
1500
1690
1875
1625
1830
2030
1750
1970
2185
1875
2110
2340
2000 HMCP250K5 I
2250 HMCP250L5 I
2500 HMCP250W5 S
Accessory - J frame
Cat. No.
Alarm switch
Auxiliary switch
Auxiliary switch, 2 pole
Under-voltage release, 220-250Vdc
Solenoid operator, 240Vac
Handle extension
Padlockable handle lock hasp
Non-padlockable handle block
Plug Nut kit (6)
Metric End Cap Kit (3P)
J Frame Terminal Hardware Kit (3 pole)
Terminal lug
Terminal shields, plastic (2)
Rotary handle kit - metal handle with mecahnism and 30cm shaft - IP65
A1L2RPK
A1X2PK
A2X2PK
AAL2RPK
SNT2P04K
SNT2P11K
SNT2P14K
UVH2LP03K
UVH2LP08K
UVH2LP11K
UVH2LP15K
UVH2LP21K
UVH2LP28K
EOP2T11
HEX3
PLK3
LKD3
PLN2M
KPEKM2
JTH
T250KB
TSJ
IPB3
WHM2R12
HMCP250A
HMCP250C
HMCP250D
HMCP250F
HMCP250G
HMCP250J
S
S
S
I
S
S
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
118.04
118.04
208.00
208.00
277.56
277.56
277.56
277.56
277.56
277.56
277.56
277.56
277.56
2352.24
29.80
75.60
17.71
71.92
26.13
14.47
15.12
156.16
20.84
317.62
1-33
1100V Mining Circuit Breaker - K frame
1
Description
PSCC
at 1000V
PSCC
at 1100V
Cat. No.
63-400A K Frame
14kA
12kA
E2KM3400F
Ampere Rating
Cat. No.
160-200
200-250
250-315
315-400
KT3200TA
KT3250TA
KT3315TA
KT3400TA
Stock
Code
Price $
ex GST
S
2691.36
Stock
Code
Price $
ex GST
S
S
S
S
343.44
343.44
343.44
343.44
Trip Unit - Electronic
Ampere
Rating
Digitrip
Cat. No.
125
250
400
KES3125LSI
KES3250LSI
KES3400LSI
Stock
Code
Price $
ex GST
S
S
S
1232.28
1232.28
1232.28
Ampere
Rating
Rating Plug
Cat. No.
63,80,100,125
125,160,225,250
200,250,315,400
A1KES125T2
A2KES250T2
A4KES400T2
K Frame HMCP - Trip Unit only, all ratings (for use with K frame 3 pole circuit breakers)
Motor
FLC
48.1-102.0A
67.4-142.8A
77.0-163.3A
86.6-183.6A
96.2-204.0A
153.9-326.9A
Current A
B
C
D
E
F
G
H
400 625
700
780
860
940
1020
1090
1170
400 875
980
1090
1200
1310
1420
1530
1640
400 1000
1125
1250
1375
1500
1625
1750
1875
400 1125
1265
1410
1545
1690
1830
1970
2110
400 1250
1405
1560
1720
1875
2030
2185
2340
400 2000
2250
2500
2750
3000
3250
3500
3750
Stock
Code
Price $
ex GST
S
S
S
154.87
154.87
154.87
Price ex GST
I
1250
1750
2000
2250
2500
4000
Cat. No.
HMCP400F5
HMCP400J5
HMCP400K5
HMCP400L5
E2K3400TMW
HMCP400X5
$219.40
Stock
Code
S
I
S
S
S
S
Accessory - K frame
Cat. No.
Alarm Switch
Auxiliary Switch - 1 pole
Auxiliary Switch - 2 pole
Alarm + Auxiliary Combination Switch
Shunt Trip Device 12-24V ac/ac
Shunt Trip Device 110-240Vac
Shunt Trip Device 380-440Vac
Under-voltage Trip Device 24Vac
Under-voltage Trip Device 48-60Vac
Under-voltage Trip Device 24Vdc
Under-voltage Trip Device 48-60Vdc
Electrical Motor Operator - 240Vac
Toggle Extension Handle
Lockdog JW/KW
Handle Padlock Hasp
Metric End Cap Kit (3 pole)
Keeper Nut Kit - Line side
Keeper Nut Kit - Load side
Terminal Hardware Kit (3 Pole)
T300K Terminal
T350K Terminal
Terminal L Adapter Kit
Inter Phase Barrier
Terminal Shield (Pair)
Rotary Metal Handle IP65 Black 12" Shaft with mechanism
1-34
A1L3RPK
A1X3PK
A2X3PK
AAL3RPK
SNT3P04K
SNT3P11K
SNT3P14K
UVH3LP03K
UVH3LP05K
UVH3LP08K
UVH3LP11K
UVH3LP15K
UVH3LP21K
UVH3LP23K
UVH3LP26K
UVH3LP28K
EOP3T11
HEX3
LKD3
PLK3
KPEKM3
KPR3AM
KPR3BM
KTH
T300K
T350K
TAD3
IPB3
TSK
WHM3R12
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
150.12
150.12
240.62
240.62
277.12
277.12
277.12
277.12
277.12
277.12
277.12
277.12
277.12
277.12
277.12
277.12
2825.28
29.80
17.71
75.60
26.13
72.68
87.69
15.76
30.13
50.43
57.56
20.84
195.58
322.92
1100V Mining Circuit Breaker - L frame
Description
PSCC
at 1000V
PSCC
at 1100V
Cat. No.
250-630A L Frame
18kA
12kA
E2LM3600F
Adjustable Ampere Rating
Cat. No.
250 - 315
315 - 400
400 - 500
500 - 630
LT3315TA
LT3400TA
LT3500TA
LT3630TA
Stock
Code
Price $
ex GST
S
2882.50
Stock
Code
Price $
ex GST
S
S
S
S
1021.68
1021.68
1021.68
1021.68
1
Magnetic Only Trip
L Frame HMCP - Trip Unit only, all ratings (for use with L frame 3 pole circuit breakers).
Motor
FLC
Current A
B
C
D
E
F
G
86.6-183.6A
115.4-244.9A
134.7-285.7A
153.9-326.9A
600
600
600
600
1125
1500
1750
2000
1266
1688
1969
2250
1406
1875
2188
2500
1547
2063
2406
2750
1688
2250
2625
3000
1828
2438
2844
3250
1969
2625
3063
3500
Price ex GST
$1901.00
H
I
Cat. No.
Stock
Code
2109
2813
3281
3750
2250
3000
3500
4000
E2L3600TML
E2L3600TMN
E2L3600TMR
E2L3600TMX
Price ex GST
E2L3600TMP
E2L3600TM
S
I
I
S
$3858.00
I
I
192.3-408.2A 600 2500
2813
3125
3438
3750
4063
4375
4688
5000
230.8-489.8A 600 3000
3375
3750
4125
4500
4875
5250
5625
6000
Note
The recommended full load current range is based on the breaker having continuous
current rating of not less than 115% of the motor full load current.
Accessory - L frame
Cat. No.
Alarm switch
Auxiliary switch
Shunt trip, 9-24Vac/dc
Under-voltage release, 110-125Vdc
Motor operator 240V
Handle (Toggle) Extension
Busbar mounting kit (3)
Busbar extension kit (3)
Metric End Cap Kit (3 pole)
Terminal shields, plastic (2)
A1L4RPK
A1X4PK
A2X4PK
A3X4PK
AA214RPK
SNT4LP03K
SNT4LP11K
SNT4LP14K
UVH4LP21K
UVH4LP08K
UVH4LP11K
UVH4LP15K
UVH4LP26K
EOP4T11A
HEX4
HLK4
1514-1011/1
1517-0692/1
KPEKM4
IPB4
TSL
WHM4R12
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
268.05
268.05
455.76
558.36
558.36
378.00
378.00
378.00
378.00
378.00
378.00
378.00
378.00
2916.00
43.95
128.41
43.84
123.98
49.89
20.84
234.79
367.20
Stock
Code
Price $
ex GST
S
S
7812.72
10591.56
Stock
Code
Price $
ex GST
S
S
305.64
305.64
1100V Mining Circuit Breaker - N frame with Electronic Trip
Description
PSCC
at 1000V
PSCC
at 1100V
Cat. No.
400-800A N Frame
630-1250A N Frame
25kA
25kA
20kA
20kA
E2NM3800T32W
E2NM312T32W
Adjustable
Ampere Rating
For
800AF
For
1250AF
Cat. No.
400, 500, 630, 800
630, 800, 1000, 1250
X
X
A8NES800T2
A12NES1250T2
Rating Plugs
1-35
Accessory - N frame
Accessory
1
Cat. No.
Alarm switch
Auxiliary switch (Right Side Mount)
Auxiliary alarm switch (2pole aux. + 1pole alarm)
Shunt trip, 24Vac/dc
Shunt trip, 48-60Vac
Shunt trip, 110-240Vac
Shunt trip, 380-440Vac , 220-250Vdc
Shunt trip, 48-60Vdc
Shunt trip, 110-125Vdc
Motor operator
Handle extension
Padlockable lockdog
Busbar mounting kit
Busbar extension kit NW/HNW
End cover
Insulation, 3 pole
A1L5RPK
A1X5PK
AA215RPK
SNT5LP03K
SNT5LP05K
SNT5LP11K
SNT5LP14K
SNT5LP23K
SNT5LP26K
UVH5LP08K
UVH5LP11K
UVH5LP29K
EOP5T11
HEX5
PLK5
1517-2055/1
1517-0689/1
1517-1140/5
IPB5
1543-0249/1
WHM5R12
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
282.96
282.96
395.28
388.80
388.80
388.80
388.80
388.80
388.80
731.16
731.16
731.16
2916.00
186.84
128.41
47.95
175.71
129.60
71.82
10.47
433.88
Stock
Code
Price $
ex GST
I
I
17325.36
18306.00
Stock
Code
Price $
ex GST
S
S
407.16
420.12
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
S
S
S
S
297.00
346.68
501.12
632.88
402.84
415.80
415.80
415.80
415.80
415.80
7307.28
346.68
206.28
139.32
1100V Mining Circuit Breaker - R frame with Electronic Trip
Description
PSCC
at 1000V
PSCC
at 1100V
Cat. No.
800-1600A R Frame
1000-2000A R Frame
25kA
25kA
20kA
20kA
E2RM316T33W
E2RM320T33W
Rating Plugs
Adjustable
Ampere Rating
Cat. No.
800, 1000, 1250, 1600
1000, 1250, 1600, 2000
A16RES16T2
A20RES20T2
Accessory - R frame
Accessory
Alarm switch
Alarm switch, 2 pole
Shunt trip, 24Vdc
Shunt trip, 120 to 240Vac
Shunt trip, 440Vac
Shunt trip, 48 to 60Vdc
Motor operator, 240Vac
Terminal block, 24 way
Handle extension - HEX6
1-36
Cat. No.
A1L6RPK
A2L6RPK
A2X6RPK
A4X6RPK
SNT6P03K
SNT6P11K
SNT6P14K
SNT6P23K
UVH6RP08K
UVH6RP21K
EOP6T11K
TBRDK
367/358
HLK6
Integral and Remote Residual Current Devices
EL305 and EL306 Residual Current Devices are available with toroid built-in and
with remote toroid. Remote sensing unit is supplied complete with remote toroid.
1
Features:
• Compact thermoplastic case sealed to prevent ingress of dust and moisture
• Easy to install, convenient clip-tray mounting
• Earth leakage test button to verify that the power supply, sensing and detecting
circuits as well as the MCCB tripping mechanism is working in order.
• Remote tripping facility available on request
• Highly stable on long cables and on starting motors
• Immune to the effects of pulsating DC
EL305
instantaneous
440Vac
45~55Hz
MDA.G398
Operation
Voltage
Frequency
Approvals
Dimensions
Integral Toroid Units (core ID 51mm)
EL305
Sensitivity
Cat No:
Stock
Code
0.250 A
EL305A/1
S
0.250 A
EL305A/1-240V
S
0.500 A
EL305B/1
S
1.00 A
EL305J/1
S
2.00 A
EL305L/1
I
5.00 A
EL305K/1
I
Remote Toroid Units (core ID 95mm)
EL305
Sensitivity
Cat No:
Stock
Code
0.250 A
0.500 A
1.00 A
2.00 A
5.00 A
Notes
EL305A/4
EL305B/4
EL305J/4
EL305L/4
EL305K/4
S
I
I
I
I
Height
58mm
Width
105mm
EL306
inverse time delay
110~660Vac
Depth
125mm
Weight
1.0kg without toroid
5.0kg with 95mm remote toroid
Price $
Sensitivity
EL306
Cat No:
970.92
970.92
970.92
970.92
970.92
970.92
0.375 A
0.500 A
1.00 A
5.00 A
EL306F/1
EL306C/1
EL306D/1
EL306H/1
Price $
Sensitivity
EL306
Cat No:
2043.36
2043.36
2043.36
2043.36
2043.36
0.375 A
0.500 A
1.00 A
5.00 A
EL306F/4
EL306C/4
EL306D/4
EL306E/4
Stock
Code
I
I
I
S
Price $
ex GST
1076.76
1076.76
1076.76
1076.76
Stock
Code
Price $
ex GST
I
S
S
I
2147.04
2147.04
2147.04
2147.04
Both integral and remote units use the same moulded case with integral aperture but
integral units have integral cores present and require no remote toroid. Remote units
have integral cores removed and remote toroid connections brought out. Blue to S1,
Red to S2 and Green to S3.
These units are not recommended for use on capacitive or high inrush applications.
Discount Schedule Accessories C4
1-37
Series-G E FRAME MCCB (25kA)
Single Pole "GEB" and Mulipole "GEE"
MCCB E-frame
Single and Multipole "GES"
Single and Multipole "GEH"
10
10
10
10
10
10
10
10
10
10
8
10
13
16
20
25
32
40
50
63
16
20
25
32
40
50
63
10
10
10
10
10
10
10
BREAKER
RATING A kA
1 10
2 10
4 10
6 10
8 10
10 10
13 10
Upstream
10
10
10
10
1
2
4
6
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
22
22
25
25
25
25
25
25
25
25
25
25
25
25
22
22
25
25
25
25
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
80
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
100
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
125 160
40 40
40 40
40 40
40 40
40 40
40 40
40 40
40 40
40
40
40
40
40
40
40
200
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
250
40
40
40
40
40
40
40
40
MCCB J-frame
25
25
25
25
25
25
25
25
22
22
25
25
25
25
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
80
70
40
40
40
40
40
40
40
40
40
40
40
40
40
40
100
70
40
40
40
40
40
40
40
40
40
40
40
40
40
40
125
70
40
40
40
40
40
40
40
40
40
40
40
40
40
40
160
70
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
250
70
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
200
70
40
40
40
40
40
40
40
50
70
40
40
40
40
40
40
40
25
25
25
25
25
25
25
25
25
25
25
25
25
25
50
40
40
40
40
40
40
40
40
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Series-G J FRAME MCCB (70kA)
Single and Multipole "GJH"
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Series-G J FRAME MCCB (40kA)
Single and Multipole "GJS"
25
25
25
25
25
25
25
25
25
25
25
25
25
25
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
70
70
70
70
Upstream
70
70
70
70
70
70
70
70
70
70
70
70
70
70
40
40
40
40
40
40
40
40
40
40
70
70
70
70
40
40
40
40
40
40
40
40
40
40
70
70
70
70
16
20
25
32
40
50
63
10
10
10
10
10
10
10
80
80
80
80
80
80
80
50
50
50
50
50
50
50
40
40
40
40
40
40
40
40
40
40
70
70
70
50
40
40
40
40
40
40
40
40
40
40
70
70
70
50
40
40
40
40
40
40
40
160
80
25
25
25
25
25
25
40
25
25
25
25
25
-
200
80
25
25
25
25
25
25
25
BS FUSE
BS88
40
40
40
40
40
40
40
40
40
40
70
70
70
50
< 80 100
BREAKER
RATING A kA 80 80
1 10 80 40
2 10 80 40
4 10 80 40
6 10 80 40
8 10 80 40
10 10 80 40
13 10 80 50
40
40
40
40
40
40
40
40
40
40
70
70
70
70
16 20 32 40 50 63 80 100125 20 32 40 50 63 80 100 125 160 20 32 40 50 63 80 100 125
BREAKER
RATING A kA 25 25 25 25 25 25 25 25 25 40 40 40 40 40 40 40 40 40 70 70 70 70 70 70 70 70
Upstream
EATON 10kA DIN MCB and RCBO
1-38
Downstream
Downstream
33
33
33
33
33
33
33
100
33
33
33
33
33
33
33
33
"BS1361"
Upstream - Moulded Case Circuit Breakers or BS Fuses / Downstream - Miniature Circuit Breakers
Series G MCCB - Application Table
1
Backup Protection* - Prospective Fault Level To
Which Protection Is Achieved (kA)
* Also known as 'series-rating' or ‘cascading’
As per IEC 60947 Part 2
Downstream
50kA
70kA
50kA
70kA
40kA
70kA
40kA
25kA
100kA
Max
Max
Max
Max
Max
Max
Max
Max
all current ratings
70kA
Max
Max
Max
Max
Max
Max
all current ratings
50kA
40kA
70kA
Series-G L
FRAME MCCB
Series-G J
FRAME MCCB
70kA
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
100kA
Max
Max
Max
Max
Max
all current ratings
50kA
Series-G N
FRAME MCCB
MCCB
‘Max’ represents the maximum back-up protection to the kA rating of the upstream device.
"Series-GR-frame
MCCB"
70kA
"Series-GN-frame 70kA
MCCB"
100kA
"Series-GL-frame
MCCB"
"Series-GJ-frame
MCCB"
"Series-GE-frame
MCCB"
all current
rating
all
current
rating
all
all
current current
rating rating
all current
rating
BREAKER RATING A
Upstream
100kA
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
all current ratings
70kA
Series-G R
FRAME MCCB
Upstream - Moulded Case Circuit Breakers or BS Fuses / Downstream - Moulded Case Circuit Breakers
Backup Protection* - Prospective Fault Level To Which Protection Is Achieved (kA)
* Also known as 'series-rating' or 'cascading'
80
80
80
80
80
200A Max
80kA
BS88
BS FUSE
1
1-39
32
7kA
7kA
7kA
4
6
7kA
7kA
10
7kA
8kA
8kA
10kA
8
7kA
7kA
7kA
10kA 10kA
2
160
125
100
80
63
50
40
32
500
500
630
630
630
630
800
800
800
800
800
800
1kA
1kA
1kA
1kA
1kA
1kA
1kA
1kA
1.3kA
1.3kA
1.3kA
1.3kA
1.3kA
1.3kA
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
5kA
6kA
7kA
7kA
8kA
9kA
9kA
10kA
10kA
10kA
10kA
10kA
10kA
10kA
160
80
500
500
500
500
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
800
800
800
800
800
800
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
30kA
40 or 70kA versions
50
100
1kA
1kA
1kA
1kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
Series-G J FRAME MCCB
1.3kA
1.3kA
1.3kA
1.3kA
1.3kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
125
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
160
T' represents maximum discrimination to kA rating level of the downstream device
100
500
1.3kA
400
320
200
20
6kA
7kA
7kA
8kA
8kA
9kA
9kA
10kA
10kA
10kA
10kA
10kA
10kA
125
16
5kA
6kA
7kA
7kA
8kA
8kA
9kA
10kA
10kA
10kA
10kA
10kA
10kA
100
5kA
630
5kA
6kA
7kA
7kA
8kA
8kA
9kA
9kA
10kA
10kA
10kA
10kA
80
63
50
40
5kA
32
7kA
7kA
8kA
8kA
9kA
9kA
6kA
500
10kA
10kA
25
7kA
7kA
7kA
8kA
8kA
8kA
8kA
10kA
63
7kA
400
7kA
7kA
7kA
8kA
8kA
8kA
10kA
50
20
16
13
40
25, 40, or 70kA versions
20
1
BREAKER
RATING A
16
Series-G E FRAME MCCB
(max.settings)
2kA
2kA
2kA
2kA
2kA
2kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
200
2.5kA
2.5kA
2.5kA
2.5kA
2.5kA
2.5kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
250
400
500
630
5.2kA
5.2kA
5.2kA
5.2kA
5.2kA
5.2kA
5.2kA
5.6kA
5.6kA
5.6kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
50 or 70kA versions
250
320
Series-G L FRAME
40kA
40kA
40kA
40kA
65kA
65kA
65kA
65kA
65kA
65kA
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Series-G N
FRAME
800
1250
1600
50 or 70 or
100kA versions
Upstream - Moulded Case Circuit Breakers / Downstream - Moulded Case Circuit Breakers or Miniature Circuit Breakers
Upstream
10kA
EATON Type C MCB
1-40
Series-G E-frame MCCB
65kA
65kA
65kA
65kA
65kA
65kA
65kA
65kA
65kA
65kA
T
T
T
T
T
T
T
T
T
T
T
T
T
T
70 or 100kA
versions
1600
2000
2500
Series-G R FRAME
1
Downstream
Series G - Application Table
CURRENT DISCRIMINATION - PROSPECTIVE FAULT LEVEL TO WHICH DISCRIMINATION IS
ACHIEVED (A)
Series-G MCCB
Downstream
125
1kA
1.25kA
1.25kA
1.25kA
40 or 70kA versions
100
1.6kA
1.6kA
1.6kA
1.6kA
1.6kA
160
2kA
2kA
2kA
2kA
2kA
200
2.5kA
2.5kA
2.5kA
2.5kA
2.5kA
2.5kA
250
3.2kA
3.2kA
3.2kA
3.2kA
3.2kA
3.2kA
3.2kA
3.2kA
320
500
630
40kA
40kA
40kA
3.2kA
3.2kA
40kA
40kA
40kA
40kA
40kA
40kA
10kA
10kA
40kA
40kA
40kA
50 or 70kA versions
400
Series-G L FRAME
100
125
160
200
250
250
320
400
500
630
800
1250
1600
50
63
80
BREAKER
RATING A
Series-G J FRAME MCCB
(max.settings)
Upstream - Moulded Case Circuit Breakers / Downstream - Moulded Case Circuit Breakers
Upstream
J-frame
L-frame
N-frame
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
22kA
22kA
800
1250
1600
50 or 70 or
100kA versions
40kA
40kA
40kA
Series-G N FRAME
ACHIEVED (A)
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
40kA
65kA
65kA
65kA
1600
2000
2500
70 or 100kA
versions
Series-G R FRAME
1
1-41
280
280
16
1600
1600
1600
1750
1750
1800
160
125
4500
4500
4900
4900
5250
6000
8000
8000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
250
3500
100
3500
3500
3700
4000
4300
4300
T
T
T
T
T
T
T
T
T
T
T
T
T
T
200
3500
2100
2100
2200
2200
2300
2300
4250
7000
T
T
T
T
T
T
T
T
T
T
T
T
160
80
1700
920
1000
63
1000
1700
550
1800
3000
4500
5500
6200
T
T
T
T
T
T
T
T
T
T
125
50
40
32
20
1600
1600
1600
3400
4000
4600
6100
6100
7000
T
T
T
T
T
T
T
100
16
1400
1600
1800
2200
2200
2300
3700
3700
7500
7500
7500
7500
7500
80
500
530
1200
1500
1750
1750
1800
2700
2700
5400
5400
5400
5400
5400
63
63
50
450
750
40
32
880
950
1600
1600
2600
2600
2600
2600
2600
50
880
600
650
650
1000
1000
1600
1600
1600
1600
40
25
20
280
450
450
650
650
650
650
32
13
230
160
6
280
10
160
4
280
280
230
160
25
8
160
2
20
1
FUSE RATING (A)
BS88 Fuses MEM SB3 to SH10
(max.settings)
6000
6000
6000
6700
6700
7500
8500
14000
14000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
315
9000
9000
9000
9000
9600
9600
11000
13250
18000
22000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
355
19000
22000
22000
22000
23500
23500
25000
25000
25000
25000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
400
22000
24000
24000
24000
23500
23500
25000
25000
25000
25000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
450
Upstream - Fuses / Downstream - Moulded Case Circuit Breakers or Miniature Circuit Breakers
Upstream
EATON Type C MCB 10kA
1-42
Series-G E-frame MCCB
22000
24000
24000
24000
23500
23500
25000
25000
25000
25000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
500
25000
25000
25000
25000
25000
25000
25000
25000
25000
25000
T
T
T
T
T
T
T
T
T
T
T
T
T
T
560
630
710
800
ACHIEVED (A)
1
Downstream
Downstream
Series-G
L-frame MCCB
Series-G J-frame MCCB
160
200
250
315
355
400
19000
22000
22000
22000
24000
24000
450
22000
24000
24000
24000
24000
24000
500
8000
22000
24000
24000
24000
24000
24000
560
400
320
9000
9500
25000
25000
25000
25000
25000
25000
25000
630
40000
40000
40000
40000
40000
40000
40000
14000
18000
9500
10000
10000
10000
12000
12000
25000
8000
8000
8000
8800
8800
250
6200
6200
7000
7000
250
200
160
125
4100
4300
4600
100
2750
2750
4200
2200
125
BS88 Fuses MEM SB3 to SH10
(max.settings)
80
63
50
BREAKER RATING (A)
FUSE RATING (A)
Upstream
Upstream - Fuses / Downstream - Moulded Case Circuit Breakers
14000
18000
25000
40000
40000
40000
40000
40000
40000
40000
710
35000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
800
ACHIEVED (A)
1
1-43
1000V D.O.L Starting using thermal/
magnetic ROCK circuit breakers
Application Table
1
FLC
(amps)
2
4
5
8
11
13
16
Approximate
motor kW
3
5.5
7.5
11
15
18.5
22
Recommended Eaton Cutler-Hammer circuit breaker rating
E2FM
E2JM
E2KM
*16
*16
*16
20
25
32
40
22
27
32
40
54
65
79
95
30
37
45
55
75
90
110
132
40
63
80
80
125
160
108
134
144
159
180
202
217
253
289
325
361
397
433
469
150
185
200
220
250
280
300
350
400
450
500
550
600
650
100
100
125
125
160
200
200
200
250
250
160
160
160
200
200
200
250
250
315
315
400
Note: This table is based on motor starting in accordance with AS3000-1991. For use in mines, the
relevant mines standards should be consulted.
This table is based on DOL starting average 3 phase, 1000V motors, holding 125% of motor
FLC continuously and holding 600% of motor FLC for at least 10 seconds.
The above table is based on breakers being fitted with standard thermal-magnetic trip units
only. The breaker magnetic setting should be set on maximum to allow the motor to start.
For applications with electronic or low magnetic trip units, contact Eaton Electric Systems.
* These breakers do not provide protection against short time overload currents in accordance
with AS3000-1991 cl 2.4.3.4b). A separate overload protection device should be used in
conjunction with this circuit breaker (AS3000-1991 section 2.4).
1-44
E2LM
250
250
250
250
250
315
315
400
400
500
500
630
630
630
Eaton IEC DIN MCB, Quicklag MCB, Series G MCCB
Fire Pump starting using thermal/magnetic circuit breakers
1
Recommended Circuit Breaker Type and Continuous Current Rating for Motors with Start times of;
FLC
Approximate Motor
MCH
Quicklag
GE 160
GJ 250
Amps
kW
HP
20 sec. start 20 sec. start
1.5
0.55
0.75
6*
10*
1.8
0.75
1
6*
10*
3
1.1
1.5
10*
10*
16
4
1.5
2
16*
16*
16
5
2.2
3
20*
16*
16
6-7
3
4
25*
25*
16
8
9
11
12-16
17-20
21-24
25-30
31-40
4
4.5
5.5
7.5
9
11
15
18.5
41-44
45-52
53-56
57-60
61-70
71-80
81-90
91-100
101-110
111-120
121-140
141-170
171-200
201-250
251-280
281-320
22
25
30
34
37
45
53
55
63
69
75
90
110
130
150/160
185
321-360
200
5.5
6
7.5
10
12.5
15
20
25
30
35
40
45
50
60
70
75
80
90
100
120/125
150
175
200/215
250
270
32*
32*
40*
63*
25*
32*
40*
63*
63*
63*
80*
GL 630
20 sec. start
16
20
25
32
40
50
63
80
100
100
125
125
160
160
This table is based on average 3-phase,
415V AC motors only, holding 125% motor
FLC continuously and 600% motor FLC for
at least 20 seconds as shown. The
breakers, listed in this table, have either
solid state or thermal/magnetic trip
releases. The breakers having adjustable
thermal and/or magnetic settings must be
set at their maximum values.
80
100
100
125
125
160
160
200
200
225
250
250
250
250
250
300
400
450
500
630
630
AS 3000 - 1991
The recommended breaker ratings are based on
AS 3000 - 1991, section 2.19.9.2 and that only one fire-pump motor is protected by each recommended circuit-breaker rating.
* These breakers do not provide protection against short time overload currents in accordance with AS 3000 - 1991, section
2.4.3.4 (b).
* A separate overload protection device should be used in conjunction with this breaker (refer AS 3000 - 1991, section 2.4).
AS/NZS 3000 : 2000
The recommended breaker ratings are based on AS/NZS 3000: 2000, section 7.10.9.2 and that only on fire-pump motor is
protected by each recommended circuit-breaker rating. Attention is drawn to AS/NZS 3000 : 2000, section 2.4.3.2 which requires
coordination between the conductors and the protective device. Note that this may involve provision of additional overload
protection or appropriate cable size selection.
1-45
D.O.L Starting using thermal/magnetic circuit breakers
FLC
Approximate Motor
MCH IEC DIN
Quicklag
Series G E160
Series G J250 Series G L630
Amps
kW
HP
5 sec.
10 sec.
5 sec.
10 sec.
5 sec.
10 sec.
10 sec.
10 sec
start
start
start
start
start
start
start
start
1.8
0.75
1
6
6
8*
8*
16
16
3
1.1
1.5
10
10
10
16*
16
16
4
1.5
2
10
16
16*
16*
16
16
5
2.2
3
16
16
16*
20*
16
16
6-7
3
4
20
32
20
25*
16
16
1
8
9
11
12-16
17-20
21-24
25-30
31-40
4
4.5
5.5
7.5
9
11
15
18.5
5.5
6
7.5
10
12.5
15
20
25
41-44
22
45-52
25
53-56
30
57-60
34
61-70
37
71-80
45
81-90
53
91-100
55
101-110
63
111-120
69
121-140
75
141-170
90
171-200
110
201-250
130
251-280 150/160
281-320
185
30
35
40
45
50
60
70
75
80
90
100
120/125
150
175
200/215
250
321-360
361-420
421-480
270
300
335/350
200
220
250
32
32
32
40
50
63
32
32
40
50
63
20
25
40*
50*
63*
63
63
80
25*
32*
50*
63*
63*
63
80*
100
100
100
100
This table is based on average 3-phase,
415V AC motors only, holding 125%
motor FLC continuously and 600%
motor FLC for at least 5 and at least 10
seconds as shown.
The breakers, listed in this table, have
either solid state or thermal/magnetic
trip releases. The breakers having
adjustable thermal and/or magnetic
16
16
16
20
25
32
40
50
16
16
16
25
32
40
50
63
63
70
70
80
100
100
125
125
160
160
63
80
80
100
100
125
125
160
160
160
settings must be set at their maximum
values.
100
100
125
125
160
160
200
225
250
250
250
315
350
400
500
630
630
AS 3000 - 1991
* These breakers do not provide protection against short time overload currents in accordance with
AS 3000 - 1991, section 2.4.3.4 (b).
AS/NZS 3000 : 2000
Attention is drawn to AS/NZS 3000 : 2000, section 2.4.3.2 which requires coordination between the conductors and the
protective device. Note that this may involve provision of additional overload protection or appropriate cable size selection.
1-46
Star-delta, Auto-transformer, Resistance & Reactance
starting using thermal/magnetic CB's
1
FLC
Approximate Motor
MCH IEC DIN
Quicklag
Series G E160
Series G J250
Amps
kW
HP
3
1.1
1.5
6
8*
16
4
1.5
2
10
8
16
5
2.2
3
10
10
16
6-7
3
4
16
16*
16
8
4
5.5
16
16
16
9
4.5
6
20
20*
16
11
12-16
17-20
21-24
25-30
31-40
41-44
45-52
5.5
7.5
9
11
15
18.5
22
25
7.5
10
12.5
15
20
25
30
35
53-56
57-60
61-70
71-80
81-90
91-100
101-110
111-120
121-140
141-170
171-200
201-250
251-280
281-320
321-360
361-420
30
34
37
45
53
55
63
69
75
90
110
130
150/160
185
200
220
40
45
50
60
70
75
80
90
100
120/125
150
175
200/215
250
270
300
421-480
250
335/350
25
32
40
50
63
25*
32*
40*
50*
50
63*
63
80
16
20
25
32
40
50
50
63
80
100
100
63
80
80
100
100
125
125
160
160
This table is based on average 3-phase, 415V
AC motors only, holding 115% motor FLC
continuously and 350% motor FLC for at least
20 seconds as shown.
The breakers, listed in this table, have either
solid state or thermal/magnetic trip releases.
100
125
125
160
160
175
200
250
The breakers having adjustable thermal and/or
magnetic settings must be set at their
maximum values.
Seires G L630
20 sec. start
200
250.0
300.0
350.0
400.0
500.0
500
630
AS 3000 - 1991
* These breakers do not provide protection against short time overload currents in accordance with
AS 3000 - 1991, section 2.4.3.4 (b).
AS/NZS 3000 : 2000
Attention is drawn to AS/NZS 3000 : 2000, section 2.4.3.2 which requires coordination between the conductors and the protective
device. Note that this may involve provision of additional overload protection or appropriate cable size selection.
1-47
1-48
Fuse
Manufacturer
EATON MEM
Fuse
Type
200SF6
200
200
200
200
200
200
200
16
20
25
32
40
50
63
40
50
63
80
80
125
160
Min DIN Fuse Size
20
32
AS/NZS 3000 : 2000
Attention is drawn to clause 7.10.4.4 of AS/NZS 3000 : 2000 requiring that fault
curent limiters protecting fire and life equipment shall not be affected by a fault
on the general installation.
AS3000 - 1991
Attention is drawn to clause 2.19.4.4 of AS 3000-1991 requiring that fault curent
limiters protecting fire and life equipment shall not be affected by a fault on the
general installation.
The minimum fuse size which can be used for such applications is based on
grading under overload, one breaker with one fuse. Minimum DIN fuse sizes
recommended for use with EATON MEM DIN circuit breakers is as shown:
The recommended back-up fuse ratings are valid for prospective system fault
levels up to 50kA rms, 415Vac, 3 phase.
Fuse
Rating
(A)
200
12-t Value
Pre-Arcing
(AMP2-sec)
1.2 x 105
12-t Value
Total @ 415Vac
(AMP2-sec)
2.05 x 105
Peak Cut-off
Current @ 50kA
(kA)
10.0
Watts Loss
(W)
13.00
Technical Data on HRC Fuses Type Tested for Back-up Protection of EATON - MEM DIN MCB’s
MCH - 10kA
200
200
The recommended fuses are based on type tests performed in accordance
with the relevant subclauses under clause 8.2.3 of Australian Standard AS
3439.1-1993. Peak let through current and enegy, as stated by the fuse supplier,
have been detailed in the technical data below to assist in choosing a
replacement fuse.
1
Ratings (A)
6
10
Fault Current Limiting Fuses for Series Connected Protection
of Eaton’s MEM DIN MCB’s at 50kA prospective
DIN Fuse Rating
Cascading (Back up) Protection of
Eaton Electric Systems DIN MCBs with Fault Current
Limiting Fuses.
Siemens Ltd
Bovara-Crady
160
200
200
200
160
ELQ-
250
250
160
160
200
200
200
250
250
250
250
Quicklag
200
200
200
200
160
ELQ-TW
DIN
DIN
DIN
BS88
BS88
AC-1
AC-1
AC-1/2
3NWTF
Fuse
Cat. No.
160
200
250
160
200
Fuse
Rating
(A)
0.52 X 105
1.00 X 105
1.50 X 105
0.52 X 105
1.16 X 105
12-t Value
Pre-Arcing
(AMP2-sec)
N/A
N/A
N/A
1.42 X 105
3.30 X 105
12-t Value
Total @
415Vac
1.00 X 105
2.00 X 105
3.50 X 105
1.96 X 105
4.56 X 105
12-t Value
Total @ 550Vac
(AMP2-sec)
N/A
N/A
N/A
N/A
N/A
12-t Value
Total @ 660Vac
(AMP2-sec)
15.00
17.00
20.00
17.50
21.00
Peak Cut-off
Current
@ 50kA (kA)
13.12
17.00
20.00
13.00
15.20
Watts
Loss (W)
AS/NZS 3000 : 2000
Attention is drawn to clause 7.10.4.4 of AS/NZS 3000 : 2000 requiring that fault current limiters
protecting fire and life equipment shall not be affected by a fault on the general installation.
AS3000 - 1991
Attention is drawn to clause 2.19.4.4 of AS 3000-1991 requiring that fault current limiters protecting
fire and life equipment shall not be affected by a fault on the general installation.
Fuse brands recommended are based on exhaustive type testing conducted at the Australian
Electrical Test Centre, University of South Australia, Adelaide, in accordance with the relevant
subclauses under clause 8.2.3 of Australian Standard AS 3439.1-1993. Peak let-through current
and energy, as stated by the respective fuse suppliers, have been detailed in the technical data
grid below to assist in choosing a replacement fuse.
The recommended back-up fuse ratings are valid for prospective system fault levels up to 50kA
rms, 415Vac, 3 phase.
The minimum fuse size which can be used for such applications is based on grading under
overload, one breaker with one fuse. Minimum BS88/DIN fuse sizes recommended for use with
Eaton Electric Systems circuit breakers is as follows: Quicklag 8-16A: 63A; Quicklag 20-40A: 80A;
Quicklag 50-63A: 100A; Quicklag 80-100A: 160A; ELQ-TW 10-32A: 63A.
Technical Data on HRC Fuses Type Tested for Back-up Protection of Eaton Electric Systems Quicklag and ELQ- TW Circuit Breakers
Fuse
Type
200
200
80
100
Fuse
Manufacturer
160
160
160
200
200
200
200
200
200
8
10
16
20
25
32
40
50
63
Quicklag
Fault Current Limiting Fuses for Series Connected Protection
of Eaton Electric Systems Quicklag and ELQ Circuit Breakers
BS88 Fuse
DIN Fuse
Ratings (A)
Cascading (Back-up) Protection of Quicklag
and ELQ CBs with Fault Current Limiting Fuses.
1
1-49
Plastic Load Centres
DIN - Loadcentres
Polyester - IP40
1
LCD Loadcentres come complete with active busbar, earth
bar and neutral link. Neutral link takes 35mm2 incoming
cable. Fitted with transparent door, surface or flush
mounted 8 to 36 pole versions.
Flush Mount
Pole
Width
Capacity
8
192mm
12
264mm
24
264mm
36
264mm
Surface Mount
Height
Depth
229mm
229mm
354mm
498mm
99mm
99mm
99mm
99mm
Cat. No.
Stock
Code
LCD8PFLT/R
OA
LCD12PFLT/R
S
LCD24PFLT/R
S
LCD36PFLT/R
S
Price $
ex GST
104.70
120.60
184.70
250.34
Pole
Width
Capacity
Height
12
24
36
229mm 99mm
354mm 99mm
498mm 99mm
264mm
264mm
264mm
Depth
Cat. No.
LCD12PST/R
LCD24PST/R
LCD36PST/R
Stock
Code
Price $
ex GST
S
S
S
120.63
184.68
250.34
Polyester - IP55
ELCD Loadcentres come complete with active busbar,
earth bar and neutral link. Neutral link takes 16mm2
incoming cable.
Pole
Capacity
8
12
24
36
Surface Mount
Cat. No.
ELCD9PT/RR
ELCD13PT/RR
ELCD26PT/RR
ELCD39PT/RR
Stock Code
S
S
S
S
Accessory
Cat. No.
Stock Code
Spare pole fillers - four poles
Bus comb - uninsulated 12 pole 80A
12 pole Earth + 12 pole Neutral Bar
Key Lock Kit
Bus comb - insulated 16mm2 1ph 1mtr long
End Cover - 2ph & 3ph buscomb
GDMCBPF
64WCOMB12
64BAR12
ELCD92150
MB1P
MB2P
MB3P
MBEC23
1-50
Width
Height
Depth
234mm
305mm
305mm
305mm
214mm
214mm
410mm
560mm
117mm
118mm
150mm
150mm
S
S
S
S
S
S
S
S
Price $
ex GST
170.74
202.71
325.40
448.09
Price $
ex GST
3.78
10.15
57.99
37.36
68.58
138.99
169.66
2.91
Moulded Covers
Quicklag - Moulded Covers
1
Quicklag Moulded Covers - suitable for front or rear connection.
Includes chassis for mounting Quicklag, ELQ or Quickmov .
TM
Dimensions
Height
Width
Depth
S1Q
S3Q
159mm
159mm
30mm
79mm
70mm
70mm
Cat. No.
Stock Code
S1Q
S3Q
Price $
ex GST
S
S
18.68
37.36
Polycentre
Polycentre - Accomodates from one to six poles of Quicklag or ELQ
breakers using knockouts. Fully insulated; no earth needed.
Suitable for front or rear connection. Supplied complete with neutral
link and bus link for line side connections and with cable knockouts.
Dimensions
Height
Width
Depth
203mm
203mm
89mm
Cat. No.
Stock Code
Price $
S
119.98
Stock Code
Price $
S
25.38
QPC
Accessory
Cat. No.
Kit of 10 sealing screws for quicklag covers QSEALKIT
ex GST
ex GST
Din - Moulded Covers
Din Moulded Covers - suitable for front or rear connection. Includes
moulded rail for mounting Din circuit breakers.
Dimensions
Height
Width
Depth
S2DTC
S4DTC
130mm
130mm
52mm
85mm
62mm
65mm
Cat. No.
Discount Schedule DIN C19 all else C2
Stock Code
Price $
ex GST
S2DTC
S
14.14
S4DTC
S
19.44
EATON CORPORATION LV Power
1-51
Metal Loadcentres
Quicklag - Loadcentres
1
LCQ Loadcentres come complete with active busbar, earth bar and
neutral link. Neutral link takes 35mm2 incoming cable.
Available with or without drop-down door, surface or flush mounted.
4 to 18 pole versions. Earth leakage units available on request.
Dimensions:
Height
234mm
Width
below
Depth
70mm
(+26mm extra depth for door; +50mm extra height and width for
flush cover)
Loadcentres without Doors
Pole
Width
Capacity
4
233mm
6
284mm
9
360mm
Flush Mount
Cat. No.
Stock Code
LCQ4F
S
LCQ6F
S
LCQ9F
S
Price $
ex GST
113.20
123.70
145.50
Surface Mount
Cat. No.
LCQ4S
LCQ6S
LCQ9S
12
15
18
LCQ12F
LCQ15F
LCQ18F
168.00
183.30
200.00
LCQ12S
LCQ15S
LCQ18S
Price $
ex GST
175.30
198.40
220.60
235.30
250.30
Stock Code
S
S
S
Price $
ex GST
113.18
123.66
145.47
S
S
S
167.94
183.27
200.01
Surface Mount
Cat. No.
LCQ6SD
LCQ9SD
LCQ12SD
LCQ15SD
LCQ18SD
Stock Code
S
S
S
S
S
Price $
ex GST
175.25
198.39
220.64
235.33
250.34
Accessory
Cat. No.
Stock Code
Spare pole fillers
Designation labels, neutral or earth
Designation labels, 1-20, main switch, etc.
QPF
1521-0031/14
1521-0175/1
Option: special colour ex factory
Option: coin lockable door
Lock (type “E”)
12-pole, 3-phase busbar kit
LCQCLK
LCQ12PBB
LCQ18PBB
436mm
512mm
589mm
S
S
S
Loadcentres with Drop-down Doors
Pole
Width
Flush Mount
Capacity
Cat. No.
Stock Code
6
284mm
LCQ6FD
S
9
360mm
LCQ9FD
S
12
436mm
LCQ12FD
S
15
512mm
LCQ15FD
S
18
589mm
LCQ18FD
S
1-52
S
S
S
S
S
S
Price $
ex GST
0.86
1.18
1.62
95.25
63.39
240.08
148.17
203.68
Metal Loadcentres
DIN - Loadcentres
1
MLCD Loadcentres come complete with active busbar, earth bar and
neutral link. Neutral link takes 35mm2 incoming cable.
Available with or without drop-down door, surface or flush mounted.
6 to 24 pole versions. Earth leakage units available on request
Dimensions
Height
234mm
Width
below
Depth
70mm
(+26mm extra depth for door; +50mm extra height and width for
flush cover)
Loadcentres without Doors
Pole
Width
Capacity
6
233mm
9
284mm
12
360mm
18
436mm
24
589mm
Flush Mount
Cat. No.
Stock Code
MLCD6F
OA
MLCD9F
OA
MLCD12F
OA
MLCD18F
OA
MLCD24F
OA
Price $
ex GST
167.40
173.12
187.16
218.48
249.69
Surface Mount
Cat. No.
MLCD6S
MLCD9S
MLCD12S
MLCD18S
MLCD24S
Stock Code
OA
OA
OA
OA
OA
Price $
ex GST
139.10
144.61
158.86
190.08
221.40
Loadcentres with Drop-down Doors
Pole
Width
Flush Mount
Capacity
Cat. No.
Stock Code
6
233mm
MLCD6FD
OA
9
284mm
MLCD9FD
OA
12
360mm
MLCD12FD
OA
Price $
ex GST
209.95
215.67
229.71
Surface Mount
Cat. No.
MLCD6SD
MLCD9SD
MLCD12SD
Stock Code
OA
OA
OA
Price $
ex GST
178.74
184.46
198.50
18
24
263.95
295.16
MLCD18SD
MLCD24SD
OA
OA
232.63
266.76
Stock Code
Price $
ex GST
3.78
53.35
66.63
73.44
98.71
117.39
436mm
589mm
MLCD18FD
MLCD24FD
OA
OA
Accessory
Cat. No.
GDMCBPF
MLCD6PBB
MLCD9PBB
MLCD12PBB
MLCD18PBB
MLCD24PBB
S
OA
OA
OA
OA
OA
1-53
Industrial Panelboard for Indoor Applications
Echidna QCE IP44 Panelboards
1
Echidna QCE Panelboards are suited to the range of Quicklag
Breakers and are supplied complete with type tested 3-phase colour
coded insulation busbar system rated at 250A/20kA for 0.1 second,
neutral bar, earth bar, lockable door with circuit identification label
and schedule. Main switch mounted top centre. Right hand hinge,
Flush lock, grey ripple polyester finish standard.
Dimensions
Height
below
Width
550mm
Pole
Capacity
12
12
24
24
36
36
48
48
60
Main
Switch
no
250A
no
250A
no
250A
no
250A
no
Height
Cat. No.
750mm
750mm
750mm
750mm
1000mm
1000mm
1200mm
1200mm
1200mm
60
72
72
84
84
250A
no
250A
no
250A
1200mm
1500mm
1500mm
1500mm
1500mm
QCE12SDR
QCE12SDRMT
QCE24SDR
QCE24SDRMT
QCE36SDR
QCE36SDRMT
QCE48SDR
QCE48SDRMT
QCE60SDR
Stock
Code
S
S
S
S
S
S
S
S
S
706.32
1013.04
726.84
1033.56
793.80
1100.52
953.64
1260.36
1094.04
QCE60SDRMT
QCE72SDR
QCE72SDRMT
QCE84SDR
QCE84SDRMT
S
S
S
S
S
1386.72
1293.84
1586.52
1613.52
1820.88
Stock Code
Price $
S
S
S
S
S
S
W
0.86
72.00
54.54
364.17
406.83
240.08
160.05
Accessory
Cat. No.
Spare pole fillers
Lock-off device
Lock-off/on device
Emergency lighting test circuit 20A 2N/C
Field fit E lock kit
Special busbars
QPF
1517-1277/1
1517-1290/1
ANEWEMLTM2
ANEWEMLTM4
ECELOCK
See page 1-62
Notes
1-54
Depth
204.5mm
Price $
ex GST
ex GST
A Quicklag breaker can be mounted on a chassis, making a side fed main switch: this reduces pole capacity by 3.
Lock-off and lock-off/on devices are mounted centrally to escutcheon for single or multi pole circuit breakers.
Horizontal cut-out 24 x 18mm module width DIN rail accessories is standard on all panelboards.
Door fitted with lift off pintle hinges as standard.
Removable gland plates top & bottom as standard.
Distribution boards can be custom built to your requirements.
Modular design provides ability to increase pole capacities - refer page 1-57
Hardware to modular self assembly provided with every panelboard
Echidna DCE IP44 Panelboards
1
Echidna DCE Panelboards are suited to the range of IEC DIN
Breakers and are supplied complete with type tested 3-phase colour
coded insulation busbar system rated at 250A/20kA for 0.1 second,
neutral bar, earth bar, lockable door with circuit identification label
and schedule. Main switch mounted top centre. Right hand hinge,
Flush lock, grey ripple polyester finish standard.
Dimensions
Height
below
Pole
Capacity
Main
Switch
Height
Cat. No.
12
12
24
24
36
36
48
48
60
no
250A
no
250A
no
250A
no
250A
no
750mm
750mm
750mm
750mm
750mm
750mm
1000mm
1000mm
1000mm
60
72
72
84
84
96
96
250A
no
250A
no
250A
no
250A
1000mm
1200mm
1200mm
1200mm
1200mm
1500mm
1500mm
Width
550mm
Depth
204.5mm
Stock
Code
ex GST
Price $
DCE12SDR
DCE12SDRMT
DCE24SDR
DCE24SDRMT
DCE36SDR
DCE36SDRMT
DCE48SDR
DCE48SDRMT
DCE60SDR
S
S
S
S
S
S
S
S
S
706.32
1013.04
726.84
1033.56
793.80
1100.52
953.64
1260.36
1094.04
DCE60SDRMT
DCE72SDR
DCE72SDRMT
DCE84SDR
DCE84SDRMT
DCE96SDR
DCE96SDRMT
S
S
S
S
S
S
S
1386.72
1293.84
1586.52
1613.52
1820.88
1733.40
1893.24
Stock
Code
Price $
Accessory
Cat. No.
Field fit E lock kit
Insulation Cap
GDMCBPF
ANEWEMLTM2
ANEWEMLTM4
ECELOCK
1521-2893/1
S
S
S
S
S
3.78
364.17
406.83
240.08
0.32
-
W
160.05
Notes
ex GST
DIN breaker can be mounted on a chassis, making a side fed mainswitch: this reduces pole capacity by 3.
Horizontal cut-out 24 x 18mm module width DIN rail accessories is standard on all panelboards.
Door fitted with lift off pintle hinges as standard.
Removable gland plates top & bottom as standard.
Distribution boards can be custom built to your requirements.
Modular design provides ability to increase pole capacities - refer page 1-57
Hardware to modular self assembly provided with every panelboard
1-55
Puggle IP44 Equipment boxes
1
Puggle Equipment boxes supplied complete with
mounting tray and a range of options including
FCL fuse base or din mounting rails either behind
or through the escutcheon.
Each DIN Rail and slot is 20x18mm modules wide.
Dimensions
Accessory
Height
below
Width
550mm
Height
Cat. No.
Depth
204.5mm
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Box
Box
Box
Box
Box
Box
-
Blank Mounting Tray
DIN Rail - Blank Escutcheon
Raised DIN Rail - Slotted Escutcheon
Blank Mounting Tray
250mm
250mm
250mm
400mm
400mm
400mm
ECPUG2NNN
ECPUG2D1B
ECPUG2D1T
ECPUG4NNN
ECPUG4D2B
ECPUG4D2T
Stock
Code
S
S
S
S
S
S
Price $
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
-
250A FCL (No fuses or cables)
Blank Mounting Tray
Blank Mounting Tray
Blank Mounting Tray
Blank Mounting Tray
400mm
750mm
750mm
750mm
1000mm
1000mm
1000mm
1200mm
1200mm
1200mm
1500mm
1500mm
1500mm
ECPUG4FCL
ECPUGANNN
ECPUGAD3B
ECPUGAD3T
ECPUGBNNN
ECPUGBD4B
ECPUGBD4T
ECPUGCNNN
ECPUGCD6B
ECPUGCD6T
ECPUGDNNN
ECPUGDD8B
ECPUGDD8T
S
S
S
S
S
S
S
S
S
S
S
S
S
693.36
626.40
686.88
699.84
827.28
907.20
920.16
907.20
1006.56
1020.60
1040.04
1159.92
1174.96
Price $
ex GST
266.76
287.28
300.24
426.60
438.48
453.60
Accessory
Cat. No.
Floor Mount Plinth - 1 Tier Wide - Painted Black
ECPLTH1P
ECPLTH2P
ECPLTH3P
Stock
Code
W
W
W
Floor Mount Plinth - 1 Tier Wide - Galvanised
Gland Plate 1.6mm Painted Steel
ECPLTH1G
ECPLTH2G
ECPLTH3G
ECGLP
W
W
W
W
279.72
419.04
590.76
66.63
Gland Plate 2.0mm Aluminium
Gland Plate 2.0mm Brass
ECGLPAL
ECGLPBR
W
W
108.00
139.75
Flush Surround - 750mm Enclosure
PVC Partition - Mech. Segregation in end to end arrangements.
ECFLSRA
ECFLSRB
ECFLSRC
ECFLSRD
ECPPEND
W
W
W
W
W
43.30
66.63
80.02
100.11
69.87
1-56
ex GST
266.76
399.60
533.52
Echidna - Standard Configuration Table
1
The Echidna Panelboard system is of modular design enabling the
user to arrange panelboards and puggles in various arrangements to
suit their individual needs.
Typical layouts are shown below and can be ordered from Eaton
Electric Systems as an assembly with components supplied loose or
fitted ask your local representative for further information.
QEQ2V1
Note:
Only these 6 configurations are offered as
an assembly for Speed-E-Quote+ .
If a different combination is required, please
contact your representitive for a Uniqu-E-Quote
550mm
2nd Pos.
= PUG2
2nd Pos.
= PUG2
3rd Pos.
Can only
be size A
= 750mm
QEQ3HV2L
550mm
1st Pos.
Can only
be size
D=
1500mm
3rd Pos.
Can only
be size A
= 750mm
550mm
1st Pos.
Can only
be size B
=1000mm
1000mm High
2nd Pos.
1st Pos.
Can only
be size B
=1000mm
QEQ3HV1R
550mm
1000mm High
1st Pos.
550mm
QEQ3HV2R
550mm
550mm
2nd Pos.
Can only be
size A =
750mm
2nd Pos.
Can only be
size A =
750mm
3rd Pos.
Can only be
size A =
750mm
3rd Pos.
Can only
be size A
= 750mm
1500mm High
2nd Pos.
2000mm Maximum Height
1st Pos.
QEQ3HV1L
550mm
1500mm Maximum Height
550mm
550mm
1st Pos.
Can only
be size
D=
1500mm
1500mm High
QEQ2H1
Note: Position 1 and 2
must be the same height
for QEQ2H1
550mm
1-57
1
EWQ IP66 Panelboards
EWQ Panelboards are IP66 rated to withstand harsh conditions.
Supplied with type tested 3-phase colour coded insulated busbar
system rated at 250A/20kA for 0.1 second, neutral/earth bars, hinged
escutcheon, lockable door, auxiliary mounting tray. Right hinge,
lockable handle, grey ripple finish door/box and white escutcheon
standard.
Approvals AS1939, DOWQ/B/6, VE7
Dimensions
Pole
Capacity
24
24
24
30
36
36
36
42
42
Main
Switch
no
100A
250
no
no
100A
250A
no
250A
Box
Height
860mm
860mm
860mm
860mm
1035mm
1035mm
1035mm
1035mm
1230mm
48
48
60
60
72
72
84
84
no
250A
no
250A
no
250A
no
250A
96
96
108
no
250A
no
Height
below
Width
550mm
Cat. No.
EWQ24SDR
EWQ24SDRQT
EWQ24SDRMT
EWQ30SDR
EWQ36SDR
EWQ36SDRQT
EWQ36SDRMT
EWQ42SDR
EWQ42SDRMT
Stock
Code
S
S
S
S
S
S
S
S
S
1616.76
1908.36
2069.28
1626.48
1773.36
2074.68
2270.16
1876.32
2355.48
1230mm
1230mm
1230mm
1600mm
1364mm
1800mm
1600mm
2000mm
EWQ48SDR
EWQ48SDRMT
EWQ60SDR
EWQ60SDRMT
EWQ72SDR
EWQ72SDRMT
EWQ84SDR
EWQ84SDRMT
S
S
S
S
W
W
W
W
1947.24
2395.44
2054.16
2531.52
2560.68
3040.20
2978.64
3520.08
1800mm
2000mm
2000mm
EWQ96SDR
EWQ96SDRMT
EWQ108SDR
W
W
W
3202.20
3609.36
3362.04
Stock Code
Price $
S
S
S
W
W
W
0.86
72.03
54.54
102.92
233.71
160.05
Accessory
Cat. No.
Spare pole fillers
Lock-off device
Lock-off/on device
Door left hinge replace "R" with "L" in Cat No.
Flush Surround replace "S" with "F" in Cat No.
Special busbars
QPF
1517-1277/1
1517-1290/1
See page 1-62
Notes
1-58
Depth
175mm
Price $
ex GST
ex GST
Distribution Boards can be custom built to your requirements.
Special locks can be fitted to doors.
1
EWD IP66 Panelboards
EWD Panelboards have all the features of EWQ panelboards,
but in DIN configuration. Supplied with type tested 3-phase
colour coded insulated busbar system rated at 250A/20kA for
0.1 second. Standard DIN panelboards have extra space for
ancillary equipment.
Dimensions
Pole
Capacity
12
12
24
24
36
36
Main
Switch
no
250A
no
250A
no
250A
Box
Height
860mm
860mm
860mm
1035mm
1035mm
1035mm
48
48
60
60
72
72
84
84
96
96
no
250A
no
250A
no
250A
no
250A
no
250A
1035mm
1230mm
1230mm
1364mm
1364mm
1364mm
1364mm
1600mm
1600mm
1800mm
Height
below
Width
550mm
Cat. No.
EWD12SDR250
EWD12SDRMT
EWD24SDR250
EWD24SDRMT
EWD36SDR250
EWD36SDRMT
Stock
Code
S
S
S
S
S
S
1495.80
1840.32
1616.76
1918.08
1773.36
2270.16
EWD48SDR250
EWD48SDRMT
EWD60SDR250
EWD60SDRMT
EWD72SDR250
EWD72SDRMT
EWD84SDR250
EWD84SDRMT
EWD96SDR250
EWD96SDRMT
S
S
S
S
S
W
W
W
W
W
1947.24
2395.44
2054.16
2531.52
2560.68
3014.28
2945.16
3267.00
3167.64
3575.88
Stock Code
Price $
S
S
S
W
W
3.78
364.17
406.83
102.92
233.71
160.05
Accessory
Cat. No.
GDMCBPF
ANEWEMLTM2
ANEWEMLTM4
-
Notes
Depth
175mm
Price $
ex GST
ex GST
1-59
Oversize Industrial Panelboard for
Outdoor Applications
EWQP IP66 Panelboards
1
EWQ+ Panelboards provide extra depth and width to install large
ancillary equipment. Supplied with type tested 3-phase colour coded
insulated busbar system rated at 250A/20kA for 0.1 second. Fully
welded construction, separate lift-off escutcheon and door, 3-point
locking - and IP66 rating. Right hinge, lockable handle, finish grey
ripple polyester standard.
Dimensions
Pole
Capacity
24
24
24
30
36
36
Main
Switch
no
100A
250A
no
no
100A
Box
Height
800mm
1000mm
1000mm
1000mm
1000mm
1000mm
36
42
42
48
48
60
60
72
72
84
84
96
96
108
250A
no
250A
no
250A
no
250A
no
250A
no
250A
no
250A
no
1200mm
1000mm
1200mm
1200mm
1400mm
1400mm
1400mm
1400mm
1600mm
1600mm
1800mm
1800mm
2000mm
2000mm
Height
below
Cat. No.
EWQP24SDR
EWQP24SDRQT
EWQP24SDRMT
EWQP30SDR
EWQP36SDR
EWQP36SDRQT
2277.72
2371.68
2594.16
2408.40
2519.64
2594.16
EWQP36SDRMT
EWQP42SDR
EWQP42SDRMT
EWQP48SDR
EWQP48SDRMT
EWQP60SDR
EWQP60SDRMT
EWQP72SDR
EWQP72SDRMT
EWQP84SDR
EWQP84SDRMT
EWQP96SDR
EWQP96SDRMT
EWQP108SDR
W
W
W
W
W
W
W
W
W
W
W
W
W
W
2853.36
2685.96
3001.32
2816.64
3130.92
3057.48
3409.56
3446.28
4057.56
3687.12
4353.48
3964.68
4511.16
4168.80
Stock Code
Price $
S
S
S
W
W
0.86
72.03
54.54
102.92
233.71
Cat. No.
Spare pole fillers
Lock-off device
Lock-off/on device
QPF
1517-1277/1
1517-1290/1
-
Special busbars
-
1-60
Depth
257mm
Stock
Code
W
W
W
W
W
W
Accessory
Notes
Width
650mm
Price $
ex GST
ex GST
160.05
See page 1-62
Oversize Industrial Panelboard for
Outdoor Applications
1
EWDP IP66 Panelboards
EWD+ Panelboards have all the features of EWQ+
panelboards, but in DIN configuration. Standard
DIN boards have extra space for ancillary
equipment.
Dimensions
Pole
Capacity
12
12
24
24
36
36
48
48
60
Main
Switch
no
250A
no
250A
no
250A
no
250A
no
Box
Height
600mm
1000mm
800mm
1200mm
800mm
1200mm
1000mm
1400mm
1000mm
60
72
72
84
84
96
96
250A
no
250A
no
250A
no
250A
1400mm
1200mm
1600mm
1400mm
1600mm
1400mm
1800mm
Height
below
Cat. No.
Width
650mm
Depth
257mm
EWDP12SDR250
EWDP12SDRMT
EWDP24SDR250
EWDP24SDRMT
EWDP36SDR250
EWDP36SDRMT
EWDP48SDR250
EWDP48SDRMT
EWDP60SDR250
Stock
Code
W
W
W
W
W
W
W
W
W
Price $
2149.20
2399.76
2278.80
2594.16
2519.64
2853.36
2816.64
3130.92
3057.48
EWDP60SDRMT
EWDP72SDR250
EWDP72SDRMT
EWDP84SDR250
EWDP84SDRMT
EWDP96SDR250
EWDP96SDRMT
W
W
W
W
W
W
W
3409.56
3446.28
4057.56
3687.12
4353.48
3964.68
4464.72
Stock Code
Price $
ex GST
Accessory
Cat. No.
GDMCBPF
ANEWEMLTM2
ANEWEMLTM4
-
S
S
S
W
W
3.78
364.17
406.83
102.92
233.71
-
W
160.05
Notes
ex GST
1-61
Chassis for Quicklag Circuit Breakers
Chassis
1
Both full and half-width assemblies standard. Special
configurations are available on special order. Standard
(tested to AS1136) is 250A, 20kA for 0.1 sec (variations
available.)
Chassis Poles
12
18
24
30
36
42
48
60
72
78
84
96
108
12
18
24
30
36
42
48
60
72
12***
18***
24***
30***
12***
18***
24***
30***
Height mm *
Width mm
Type (V,H)**
229
305
381
457
534
610
686
838
991
1067
1143
1291
1444
332
332
332
332
332
332
332
332
332
381
534
686
838
230
230
230
230
332
332
332
332
332
332
332
332
332
332
332
332
332
229
305
381
457
534
610
686
838
991
230
230
230
230
381
534
686
838
V
V
V
V
V
V
V
V
V
V
V
V
V
H
H
H
H
H
H
H
H
H
V
V
V
V
H
H
H
H
Quicklag Chassis - 100A Main Switch
Chassis Poles
Height mm
Width mm
12
24
36
305
457
610
332
332
332
Type (V,H)**
V
V
V
Cat No.
Q12PV
Q18PV
Q24PV
Q30PV
Q36PV
Q42PV
Q48PV
Q60PV
Q72PV
Q78PV
Q84PV
Q96PV
Q108PV
Q12PH
Q18PH
Q24PH
Q30PH
Q36PH
Q42PH
Q48PH
Q60PH
Q72PH
1521-1560/1
1521-1560/2
1521-1560/3
1521-1560/4
1521-1561/1
1521-1561/2
1521-1561/3
1521-1561/4
Cat No.
Q12PVQT
Q24PVQT
Q36PVQT
Non-Standard Variations
250A, 16kA for 0.5 sec withstand
Stock Code
Price $
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
W
W
W
W
W
W
W
W
157.78
173.98
198.72
221.07
249.91
278.53
304.99
358.45
507.60
534.49
560.95
614.30
716.58
161.89
180.36
207.03
229.50
278.53
298.83
327.88
391.06
550.80
196.99
240.40
298.94
361.69
196.99
240.40
298.94
361.69
Stock Code
Price $
S
S
S
492.26
547.12
611.49
Stock Code
Price $
W
W
W
163.29
217.83
433.83
Stock Code
Price $
S
S
S
W
0.86
0.32
63.28
322.27
ex GST
ex GST
ex GST
* Busbars extend 42mm top and bottom of mounting pan.
** (V/H) = vertical, horizontal
*** Half-width chassis
Accessory
Cat. No.
insulation caps
busbar splitting kit
factory install 2-tariff busbar
Compatible circuit breaker, refer to pages 1-6 to 1-9
QPF
1521-1287/1
1521-1236/1
-
1-62
ex GST
Chassis for DIN and Series G Circuit Breakers
1
Chassis
Compatable with all Eaton DIN Circuit Breakers of 18mm Pitch.
Short circuit capacity AS3439-3, AS3439-1
Short circuit withstand strength
Chassis
Poles
12
18
24
30
36
48
60
72
84
96
Height *
mm
110
164
218
272
326
434
542
650
758
Width
mm
229
229
229
229
229
229
229
229
229
Type
(V,H)
V
V
V
V
V
V
V
V
V
866
229
V
Cat No.
Price $
D12PV
D18PV
D24PV
D30PV
D36PV
D48PV
D60PV
D72PV
D84PV
Stock
Code
S
S
S
S
S
S
S
S
S
D96PV
S
568.80
Stock
Code
W
W
W
W
W
W
W
W
W
Price $
ex GST
157.78
178.20
198.72
224.31
249.91
304.99
358.45
507.60
614.30
250A chassis 25kA for 0.1 sec
Compatible circuit breaker, refer to pages 1-10 to 1-12
* Busbars extend 71mm top and bottom of mounting pan
G series E Frame Chassis 400A
Combined with a 'Series G', E Frame breaker
Tested to AS 3439.1 for 35 kA/0.1sec
Chassis
Poles
12
18
24
30
36
42
48
54
60
Height
mm *
225
301
377
453
530
606
682
758
834
Width
mm
Cat No.
EG40012PV
EG40018PV
EG40024PV
EG40030PV
EG40036PV
EG40042PV
EG40048PV
EG40054PV
EG40060PV
ex GST
313.20
413.64
484.92
568.08
648.00
736.56
800.28
882.36
1003.32
* Busbar extends 45mm top and bottom of mounting pan
Maximum breaker rating is 125A
Compatible circuit breaker, refer to pages 1-15
Requires 1 x 3TI25F per 3 pole breaker
G series J Frame Chassis 800A
Combined with a 'Series G', J Frame breaker
Tested to AS 3439.1 for 63 kA/0.5sec
Chassis
Poles
12
18
24
30
36
42
48
54
60
Height
mm *
210
315
420
525
630
735
8401
945
1050
Width
mm
388
388
388
388
388
388
388
388
388
Cat No.
JG80012PV
JG80018PV
JG80024PV
JG80030PV
JG80036PV
JG80042PV
JG80048PV
JG80054PV
JG80060PV
Stock
Code
W
W
W
W
W
W
W
W
W
Price $
ex GST
465.48
596.16
736.56
895.32
1009.80
1193.40
1397.52
1517.40
1638.36
* Busbar extends 52.5mm top and bottom of mounting pan
Compatible circuit breaker, refer to pages 1-16
Discount Schedule DIN - C6 all else C2
EATON CORPORATION LV Power
1-63
J Frame and MPC High Load Capacity Chassis
1
MPC High Load Capacity Chassis
The MPC chassis allows most Cutler-Hammer moulded case circuit
breakers to be mounted on a single mounting frame. This chassis
has a withstand capacity of 63kA for 1 second to AS1136. The MPC
main busbar has a current carrying capacity of 1440A (end fed) or
2400A (centre fed). To select,
1.
Choose chassis below
2.
Choose tee-offs to fill chassis
3.
If required, select modifications
Chassis - Capacity
(Breaker Units)
12
17
24
31
45
3-Phase *** Tee-Off Set
Breaker Frame Size
FW/FWF/HFW/HFWF
JW/HJW
KW/HKW
LW/HLW
LW800
J/F Adaptor
GE
GJ
GL 400A Max
Height **
mm
508
683
928
1173
1663
Width
mm
532
532
532
532
532
"Space Used
(Breaker Units)"
3
3
4
6
6
3
3
4
Depth
mm
96
96
96
96
96
Cat No.
1541-MPC12
1541-MPC17
1541-MPC24
1541-MPC31
1541-MPC45
Cat No.
1541-F
1541-J
1541-K
1541-LA
1541-LW8
1541-1111/1
1541-EG
1541-JG
1541-LG
Modifications
Cat No.
Two tarrif busbar
Centre-fed busbar
Extra busbar support
1541-SPTBB
1541-CF
1541-BBSP
** Busbars extend 115mm top end of chassis
Stock
Code
W
W
W
W
W
Price $
ex GST
942.84
1031.14
1317.60
1896.48
2016.36
Stock
Code
W
W
W
W
W
W
W
W
W
Price $
Stock
Code
W
W
W
Price $
ex GST
263.19
316.33
407.16
473.47
721.11
104.22
250.12
263.19
473.47
ex GST
369.03
109.40
142.12
*** Metal Covers and Line Terminals are also available
Contact Eaton Sales Representative for layout information
1-64
1
Flexible solutions for
isolating and switching
resistive or inductive loads
• Rotary switches
• Switch-fuses & fuse-holders
• Switch-disconnectors
• Fused combination switches
• Knobs and handles
Eaton has earned a worldwide reputation for
reliable, high quality switches and fuses – an
area in which we are clear market leaders.
Incorporating the latest technological
advances, our switches are the result of a
comprehensive ongoing development
program and complies with the industry’s
most rigorous standards. This all serves to
make Eaton an industry benchmark, with
unsurpassed quality and performance
guaranteed.
Our extensive product range, together with
our lengthy experience and specialist
knowledge serves to make Eaton the only
source for your panel mounting switches.
Eaton’s switches for panel mounting can be
used for any type of load, including motor
loads and capacitive loads. They can be
applied for:
- All isolating and disconnecting applications
such as incoming and outgoing feeders;
- Bus couplers in switchgear and control
gear assemblies;
- Safety switches with interlocking facilities;
- Motor emergency switches in motor starter
units.
1300 332 866
Clip-in Fuse-links
Clip-in Fuse-links
1
Eaton - MEM fuse-links for the protection of industrial switchgear, three phase
motors, and control circuits. Eaton - MEM fuse-links feature:• Fuse-links with low watts loss, cooler running
• Compact design, reduced panel size
• Complies to BS88 and AS2005
• ASTA 20 Certified, ISO 9002
• AC Rating, 80kA, 415Vac to BS88
• DC Rating, 40 kA, 240Vdc to BS88
• Class gG for complete protection of LV cables
Description
BS Ref
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
offset
offset
offset
offset
offset
offset
tag
tag
tag
tag
tag
tag
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
2A 415Vac
4A 415Vac
6A 415Vac
8A 415Vac
10A 415Vac
12A 415Vac
F1
F1
F1
F1
F1
F1
Clip-in
Clip-in
Clip-in
Clip-in
offset
offset
offset
offset
tag
tag
tag
tag
fuse-link
fuse-link
fuse-link
fuse-link
16A 415Vac
20A 415Vac
25A 415Vac
32A 415Vac
F1
F1
F1
F1
Description
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
1-66
offset
offset
offset
offset
offset
offset
offset
BS Ref
tag
tag
tag
tag
tag
tag
tag
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
16A 415Vac
20A 415Vac
25A 415Vac
32A 415Vac
40A 415Vac
50A 415Vac
63A 415Vac
F2
F2
F2
F2
F2
F2
F2
Pack Size
Cat. No.
24
24
24
24
24
24
24
24
24
24
2SN2
4SN2
6SN2
8SN2
10SN2
12SN2
Stock
Code
S
S
S
S
S
S
16SN2
20SN2
25SN2
32SN2
S
S
S
S
Pack Size
Cat. No.
Stock
Code
S
S
S
S
S
S
S
24
24
24
24
24
24
24
16SP
20SP
25SP
32SP
40SP
50SP
63SP
Unit Price $
ex GST
8.10
8.10
8.10
8.10
8.10
8.10
8.10
9.18
11.88
11.88
Unit Price $
ex GST
21.06
21.06
21.06
21.06
23.65
23.65
25.38
Clip-in Fuse Bases
Clip-in Fuse Bases
1
Eaton - MEM Fuse Bases designed for all types of application features:
• DIN rail mounting
• Operator safe, fully shrouded terminals
• Suit clip-in fuse-links
Description
Fuse
Type
SN2
SN2
SN2
SN2
BS Ref
BS Ref
Fuse base 32A Clip-in Front Wired
Fuse base 32A Clip-in 2 Stud
Fuse base 32A Clip-in 1 Stud, Front Wired
Fuse
Type
SN2
SN2
SN2
Fuse base 32A Clip-in Rear Wired
Fuse base 32A Clip-in Front wired, White
SN2
SN2
Description
Fuse
Type
SP
SP
SP
Fuse base 20A Clip-in Front Wired
Carrier Only
Description
Fuse base 63A Clip-in Front wired
Width x Height x Depth
Base Type
25mm x 75mm x 58mm
25mm x 75mm x 58mm
32mm x 89mm x 64mm
V20
V32
V63
F1
F1
F1
F1
F1
F1
F1
F1
Cat. No.
V20FF
V20BB
V20EE
V20H
Cat. No.
V32FF
V32BB
V32BF
Stock
Code
S
S
S
I
Price $
ex GST
14.90
37.26
15.66
7.45
Stock
Code
S
I
S
Price $
ex GST
17.82
46.44
44.49
F1
V32EE
V32FFW
S
S
18.79
22.68
BS Ref
Cat. No.
Stock
Code
S
I
S
Price $
ex GST
45.36
71.28
46.33
F2
F2
F2
V63FF
V63BB
V63EE
Max Cable Size
10mm2
10mm2
25mm2
Neutral Links for Clip-in Fuse Bases
Description
BS88 Solid copper link 32A clip-in
Base
Type
V20-V32
BS88 Solid copper link 63A clip-in
V63
Cat. No.
V32LK
Stock
Code
S
Price $
ex GST
6.21
V63LK
S
13.23
1-67
Bolt-in Fuse-links
Bolt-in Fuse-links
1
Eaton - MEM fuse-links for the protection of industrial switchgear, three
phase motors, and control circuits. Eaton - MEM fuse-links feature:• Fuse-links with low watts loss, cooler running
• Class gG for complete protection of LV cables
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
BS Ref
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
2A 415Vac 44.5mm
4A 415Vac 44.5mm
6A 415Vac 44.5mm
10A 415Vac 44.5mm
12A 415Vac 44.5mm
16A 415Vac 44.5mm
20A 415Vac 44.5mm
25A 415Vac 44.5mm
32A 415Vac 44.5mm
Description
A1
A1
A1
A1
A1
A1
A1
A1
A1
BS Ref
Pack Size
24
24
24
24
24
24
24
24
24
Cat. No.
2SA2
4SA2
6SA2
10SA2
12SA2
16SA2
20SA2
25SA2
32SA2
Unit Price $
ex GST
8.64
8.64
8.64
8.64
8.64
8.64
10.04
11.44
11.44
Unit Price $
ex GST
13.93
13.93
13.93
13.93
15.12
15.12
15.12
15.12
25.65
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
2A 415Vac 73mm
4A 415Vac 73mm
6A 415Vac 73mm
10A 415Vac 73mm
16A 415Vac 73mm
20A 415Vac 73mm
25A 415Vac 73mm
32A 415Vac 73mm
35A 415Vac 73mm
A2
A2
A2
A2
A2
A2
A2
A2
A3
24
24
24
24
24
24
24
24
24
2SB3
4SB3
6SB3
10SB3
16SB3
20SB3
25SB3
32SB3
35SB4
Stock
Code
S
S
S
S
S
S
S
S
S
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(offset)
(offset)
(offset)
(offset)
(offset)
40A 415Vac 73mm
50A 415Vac 73mm
63A 415Vac 73mm
80A 415Vac 73mm
100A 415Vac 73mm
A3
A3
A3
A3
A3
24
24
24
24
24
40SB4
50SB4
63SB4
80SO
100SO
S
S
S
S
S
Pack Size
Cat. No.
Stock
Code
S
S
S
S
S
S
S
S
S
25.65
25.65
25.65
44.28
56.70
550V Rated fuses are also available on request
1-68
Bolt-in Fuse-links
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
BS Ref
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
25A 415Vac 94mm
32A 415Vac 94mm
40A 415Vac 94mm
50A 415Vac 94mm
63A 415Vac 94mm
80A 415Vac 94mm
100A 415Vac 94mm
125A 415Vac 94mm
160A 415Vac 94mm
Pack Size
Cat. No.
12
12
12
12
12
12
25SD5
32SD5
40SD5
50SD5
63SD5
80SD5
100SD5
125SD6
160SD6
Stock
Code
S
S
S
S
S
S
S
S
S
200SD6
S
Cat. No.
A4
A4
A4
A4
A4
A4
A4
-
Bolt-in fuse-link (offset) 200A 415Vac 94mm
-
Description
BS Ref
12
6
6
6
Pack Size
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(central)
(central)
(central)
(central)
(central)
2A 415Vac 97mm
4A 415Vac 97mm
6A 415Vac 97mm
10A 415Vac 97mm
16A 415Vac 97mm
-
10
10
10
10
10
2SE3
4SE3
6SE3
10SE3
16SE3
Stock
Code
S
S
S
S
S
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(central)
(central)
(central)
(central)
(central)
(central)
20A
25A
32A
40A
50A
63A
-
10
10
10
10
10
10
20SE3
25SE3
32SE3
40SE4
50SE4
63SE4
S
S
S
S
S
S
415Vac
415Vac
415Vac
415Vac
415Vac
415Vac
97mm
97mm
97mm
97mm
97mm
97mm
Description
BS Ref
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(central)
(central)
(central)
(central)
(central)
2A 415Vac 111mm
4A 415Vac 111mm
6A 415Vac 111mm
10A 415Vac 111mm
16A 415Vac 111mm
B1
B1
B1
B1
B1
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
20A 415Vac 111mm
25A 415Vac 111mm
32A 415Vac 111mm
40A 415Vac 111mm
50A 415Vac 111mm
63A 415Vac 111mm
80A 415Vac 111mm
100A 415Vac 111mm
125A 415Vac 111mm
160A 415Vac 111mm
200A 415Vac 111mm
250A 415Vac 111mm
315A 415Vac 111mm
355A 415Vac 111mm
400A 415Vac 111mm
B1
B1
B1
B1
B1
B1
B1
B1
B2
B2
B2
B3
B3
B4
B4
Pack Size
10
10
10
10
10
10
10
10
10
10
10
12
12
6
6
6
1
1
1
1
Cat. No.
2SF3
4SF3
6SF3
10SF3
16SF3
20SF3
25SF3
32SF3
40SF4
50SF4
63SF4
80SF5
100SF5
125SF6
160SF6
200SF6
250SF7
315SF7
355SF8
400SF8
Stock
Code
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Unit Price $
ex GST
50.76
50.76
50.76
50.76
50.76
50.76
50.76
81.00
81.00
92.88
Unit Price $
ex GST
28.62
28.62
28.62
28.62
28.62
28.62
28.62
28.62
31.32
31.32
31.32
Unit Price $
ex GST
28.62
28.62
28.62
28.62
28.62
28.62
28.62
28.62
31.32
31.32
31.32
49.68
49.68
77.76
81.00
86.40
132.84
145.80
172.80
210.60
- 550V Rated fuses are also available on request.
- Weatherproof and silver element fuselinks for specific ratings are available on request.
1-69
1
Bolt-in Fuse-links
1
Description
BS Ref
Bolt-in fuse-link (central) 250A 415Vac 133mm
-
Description
BS Ref
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
355A 415Vac 133/184mm
400A 415Vac 133/184mm
450A 415Vac 133/184mm
500A 415Vac 133/184mm
560A 415Vac 133/184mm
630A 415Vac 133/184mm
710A 415Vac 133/184mm
800A 415Vac 133/184mm
C1
C1
C2
C2
C2
C2
C3
C3
(central)
(central)
(central)
(central)
(central)
(central)
450A 415Vac 165/229mm
500A 415Vac 165/229mm
560A 415Vac 165/229mm
630A 415Vac 165/229mm
710A 415Vac 165/229mm
800A 415Vac 165/229mm
-
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
Pack
Size
1
1
Pack
Size
1
1
1
1
1
1
1
1
BS Ref
Pack
Size
1
1
1
1
1
1
Description
BS Ref
D1
D1
Pack
Size
1
1
Cat. No.
250SG7
315SG7
Cat. No.
355SH8
400SH8
450SH9
500SH9
560SH9
630SH9
710SH10
800SH10
Cat. No.
450SY9
500SY9
560SY9
630SY9
710SY10
800SY10
Cat. No.
1000SJ11
1250SJ11
Stock
Code
S
S
Unit Price $
ex GST
Stock
Code
S
S
S
S
S
S
S
S
Unit Price $
ex GST
172.80
210.60
275.40
312.20
341.28
371.52
532.44
588.60
Stock
Code
S
S
S
S
S
S
Unit Price $
ex GST
280.80
321.84
341.28
390.96
532.44
588.60
Stock
Code
I
I
Unit Price $
ex GST
1610.28
1893.24
132.84
145.80
- 550V Rated fuses are also available on request.
- Weatherproof and silver element fuselinks for specific ratings are available on request.
1-70
Motor Starting Fuse-links
Motor Starting Fuse-links
1
Eaton - MEM MOTOR fuse-links for the protection of three phase motors.
Eaton - MEM Motor fuse-links feature:• Fuse-links with low watts loss, cooler running
• Class gM for complete protection of Motors
Description
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
Clip-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
BS Ref
motor
motor
motor
motor
motor
motor
motor
start
start
start
start
start
start
start
16A 415Vac
20A 415Vac
25A 415Vac
32A 415Vac
40A 415Vac
50A 415Vac
63A 415Vac
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
BS Ref
(offset)
(offset)
(offset)
(offset)
(offset)
motor
motor
motor
motor
motor
25A
32A
40A
50A
63A
415Vac
415Vac
415Vac
415Vac
415Vac
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
motor
motor
motor
motor
motor
motor
motor
motor
35A 415Vac
40A 415Vac
50A 415Vac
63A 415Vac
80A 415Vac
100A 415Vac
125A 415Vac
160A 415Vac
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
motor
motor
motor
motor
motor
125A 415Vac
160A 415Vac
200A 415Vac
250A 415Vac
315A 415Vac
Description
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
BS Ref
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
(central)
motor
motor
motor
motor
motor
motor
motor
motor
motor
motor
motor
80A 415Vac
100A 415Vac
80A 415Vac
100A 415Vac
125A 415Vac
160A 415Vac
200A 415Vac
250A 415Vac
315A 415Vac
400A 415Vac
500A 415Vac
Pack Size
6
6
6
6
3
3
3
3
Pack Size
Cat. No.
100SD5M125
100SD5M160
100SD5M200
200SD6M250
200SD6M315
3
3
3
1
1
3
3
3
3
3
3
3
1
1
1
1
Cat. No.
32SB3M35
32SB3M40
32SB3M50
32SB3M63
63SB4M80
63SB4M100
100SOM125
100SOM160
Pack Size
B1
B1
B1
B1
B1
B2
B2
B3
B4
Cat. No.
20SA2M25
20SA2M32
32SA2M40
32SA2M50
32SA2M63
6
6
8
20
20
A4
A4
A4
A4
A4
Cat. No.
10SN2M16
16SN2M20
20SN2M25
20SN2M32
32SN2M40
32SN2M50
32SN2M63
Pack Size
A2
A2
A2
A2
A3
A3
A3
A3
BS Ref
(offset)
(offset)
(offset)
(offset)
(offset)
24
24
6
6
6
20
20
A1
A1
A1
A1
A1
BS Ref
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
(offset)
Pack Size
F1
F1
F1
F1
F1
F1
F1
Cat. No.
63SE4M80
63SE4M100
63SF4M80
63SF4M100
100SF5M125
100SF5M160
100SF5M200
200SF6M250
200SF6M315
315SF7M400
400SF8M500
Stock
Code
I
I
S
S
S
S
S
Stock
Code
S
S
S
S
S
Stock
Code
I
S
S
S
S
S
S
I
Stock
Code
S
S
S
S
S
Stock
Code
S
S
S
S
S
S
S
S
S
S
S
Unit Price $
ex GST
11.88
11.88
11.88
11.88
31.32
31.32
31.32
Unit Price $
ex GST
12.96
12.96
32.40
32.40
32.40
Unit Price $
ex GST
16.52
16.52
17.82
17.82
31.32
31.32
65.88
65.88
Unit Price $
ex GST
58.32
62.64
81.00
102.60
110.16
Unit Price $
ex GST
32.94
32.94
33.48
33.48
57.78
57.78
67.72
95.04
110.16
172.80
312.12
1-71
Fuse-Bases - Compact Range
Fuse-Base (Compact) - CMF range for BS88 Bolt-in fuses
1
Designed for general and industrial applications. Eaton - MEM fuse bases features:• Wide range current ratings and terminations available
• Reduced dimensions, All new COMPACT design
• Large cable entries
• Up to 315A
• Rated to 415V
Description
Fuse
Type
SA2
SA2
SA2
SA2
SA2
SA2
BS Ref
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Front wired, White
Rear 2 stud, White
A1
A1
A1
A1
A1
32CMFA
32CMFB
32CMFC
32CMFD
32CMFBW
32CMFCW
BS Ref
Cat. No.
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Fuse
Type
SB3-SB4
SB3-SB4
SB3-SB4
SB3-SB4
A2-A3
A2-A3
A2-A3
A2-A3
63CMFA
63CMFB
63CMFC
63CMFD
Fuse
Type
SB3-SB4-SO
SB3-SB4-SO
SB3-SB4-SO
SB3-SB4-SO
SB3-SB4-SO
BS Ref
Fuse
Type
SD5-SD6
SD5-SD6
SD5-SD6
BS Ref
Fuse base 200A Bolt-in Front/Busbar
Fuse base 200A Bolt-in Front wired
Fuse base 200A Bolt-in Rear 2 stud
Fuse base 200A Bolt-in Front/Back
SD5-SD6
Description
BS Ref
Cat. No.
Fuse
Type
SF3-SF4-SF5-SF6-SF7
SF3-SF4-SF5-SF6-SF7
SF3-SF4-SF5-SF6-SF7
B1-B3
B1-B3
B1-B3
SF3-SF4-SF5-SF6-SF7
B1-B3
Fuse
Fuse
Fuse
Fuse
Fuse
Fuse
base
base
base
base
base
base
32A
32A
32A
32A
32A
32A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Description
Fuse
Fuse
Fuse
Fuse
base
base
base
base
63A
63A
63A
63A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Description
Fuse
Fuse
Fuse
Fuse
Fuse
base
base
base
base
base
100A
100A
100A
100A
100A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Back wired
Description
Cat. No.
A1
Stock
Code
S
S
S
S
S
S
Price $
ex GST
38.01
35.20
51.30
42.44
51.30
55.72
Stock
Code
S
S
S
S
Price $
ex GST
57.13
54.27
70.41
58.64
Stock
Code
S
S
S
S
S
Price $
ex GST
88.66
86.07
109.56
103.14
86.07
200CMFA
200CMFB
200CMFC
Stock
Code
S
S
S
Price $
ex GST
234.79
220.32
352.08
200CMFD
S
293.54
315CMFA
315CMFB
315CMFC
Stock
Code
S
S
S
Price $
ex GST
410.40
366.55
483.84
315CMFD
S
528.12
Cat. No.
A2-A3
A2-A3
100CMFA
100CMFB
100CMFC
100CMFD
100CMFE
A2-A3
A2-A3
A2-A3
Cat. No.
A4
A4
A4
A4
Neutral Links for Bolt-in Fuse Bases
Description
Cat. No.
BS88 Solid copper link 32A bolt-in 44mm
Base
Type
20-32C
32-63C
Fuse Adapators SD5 to SB3*
63-100C
100-200C
200-315C
100-200C
63MFNL
100MFNL
200MFNL
100MFLK
20MFNL
32MFNL
Stock
Code
S
S
S
S
S
S
Price $
ex GST
8.42
12.85
20.46
29.16
40.82
16.20
* Fuse Adaptor Kit: to use SB3, SB4, + SO in 100 and 200C holder.
1-72
Fuse-Bases - Standard Range
Fuse-Base (Standard) - MF range for BS88 Bolt-in fuses
1
Designed for general and industrial applications.
Eaton MEM fuse bases features:• Wide range current ratings and terminations available
• Up to 200A
• Rated to 660V
• Compliance with BS88:2
Description
Fuse
Type
SA2
SA2
SA2
SA2
SA2
SA2
BS Ref
Cat. No.
A1
A1
A1
A1
A1
A1
20MFA
20MFB
20MFC
20MFD
20MFBW
20MFCW
BS Ref
Cat. No.
Fuse
Type
SB3
SB3
Fuse base 32A Bolt-in Front wired, White
SB3
SB3
SB3
Fuse base 32A Bolt-in Rear 2 stud, White
SB3
Description
Fuse
Fuse
Fuse
Fuse
Fuse
Fuse
base
base
base
base
base
base
20A
20A
20A
20A
20A
20A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Front wired, White
Rear 2 stud, White
Description
Fuse
Fuse
Fuse
Fuse
base
base
base
base
63A
63A
63A
63A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
base
base
base
base
100A
100A
100A
100A
base
base
base
base
200A
200A
200A
200A
Bolt-in
Bolt-in
Bolt-in
Bolt-in
51.84
51.83
55.83
32MFCW
S
74.41
Fuse
Type
SB3-SB4
SB3-SB4
SB3-SB4
SB3-SB4
BS Ref
Cat. No.
A2-A3
A2-A3
A2-A3
A2-A3
63MFA
63MFB
63MFC
63MFD
Stock
Code
S
S
S
S
Price $
ex GST
55.83
52.05
63.96
59.18
BS Ref
Cat. No.
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Fuse
Type
SD5
SD5
SD5
SD5
A4
A4
A4
A4
100MFA
100MFB
100MFC
100MFD
Stock
Code
S
S
S
S
Price $
ex GST
126.57
119.88
142.23
148.82
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Fuse
Type
SF3-SF4-SF5-SF6
SF3-SF4-SF5-SF6
SF3-SF4-SF5-SF6
SF3-SF4-SF5-SF6
Stock
Code
S
S
S
S
Price $
ex GST
408.24
371.52
480.76
428.76
Size
27mm
31mm
35mm
54mm
70mm
20 / 32C
32 / 63C
63 / 100C
100 / 200C
200 / 315C
x
x
x
x
x
87mm x 50mm
109mm x 62mm
118mm x 72mm
154mm x 108mm
193mm x 149mm
Price $
ex GST
44.49
40.87
S
S
I
Description
Fuse
Fuse
Fuse
Fuse
Stock
Code
S
S
32MFC
32MFD
32MFBW
Front/Busbar
Front wired
Rear 2 stud
Front/Back
Bolt-in
Bolt-in
Bolt-in
Bolt-in
Price $
ex GST
37.26
31.64
48.33
41.04
46.33
71.82
A2
A2
A2
A2
A2
A2
Description
Fuse
Fuse
Fuse
Fuse
32MFA
32MFB
Stock
Code
I
S
S
S
S
I
BS Ref
Cat. No.
B1-B2
B1-B2
200MFA
200MFB
200MFC
200MFD
B1-B2
B1-B2
Standard
10mm2
10mm2
50mm2
70mm2
150mm2
Max Cable Size
Compact
10mm2
25mm2
50mm2
95mm2
150mm2
1-73
Fuse Bases / Holders
1
Graphical illustrations of Fuse Bases
_ _CMFA/MFA
_ _CMFB/MFB
V _ _ FF
_ _CMFC/MFC
V _ _ BB
V _ _ EE
_ _CMFD/MFD
CFHSF2AFW
CFHSF2BFW
_ _CMFE/MFE
CFHSF2ABW
CFHSF2BBW
DIN Modular Fuse Holders for Cylindrical Fuselinks
Eaton MEM Moduar Fuse Holders are Ideal for the protection domestic, commerical and
industrial applications:
MFM Features Spare Fuse Holder
MFM Suits BS88 type Fuse Links
MSC series suits LPVG type fuses and can be ganged for two and three phase switching
Modular Fuse Holders
Description
Fuse Carrier 10A, with fuse, 1510LC fuse
Fuse
Size
10.3x26mm
10.3x26mm
10.3x26mm
Cat. No.
MFM10
MFM15
MFM20
Fuse
Type
LPVG8
LPVG10
LPVG14
LPVG22
MSC81
MSC101
MS141
MS221
Stock
Code
S
S
S
Price $
ex GST
28.62
28.62
28.62
Stock
Code
I
S
S
S
Price $
ex GST
15.44
16.41
29.70
43.74
MS range - modular fuse holders
• Rating upto 660Vac
Description
Fuse
Fuse
Fuse
Fuse
Carrier
Carrier
Carrier
Carrier
only
only
only
only
20A,
32A,
50A,
125A,
Cat. No.
Versions with integral neutral link available on request.
1-74
Cylinder fuse-links
Cylinder Fuse-links for the use in and commercial and industrial
applications.
They are approved to IEC60269
Rated voltages of 400,500 and 600Vac.
Rated Braking Capacity : 20KA ac, 80KA ac, 120KA ac.
1
Cylinder fuse-links 8x31mm
Description
Cat. No.
LPVG81
LPVG82
LPVG84
LPVG86
LPVG88
LPVG810
Stock
Code
I
I
I
I
I
I
Price $
ex GST
3.78
3.78
3.78
3.78
3.78
3.78
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
1A 400 Vac, 20KA, 8x31mm
2A 400 Vac, 20KA, 8x31mm
4A 400 Vac, 20KA, 8x31mm
6A 400 Vac, 20KA, 8x31mm
8A 400 Vac, 20KA, 8x31mm
10 400 Vac, 20KA, 8x31mm
Fuse-link
Fuse-link
Fuse-link
Fuse-link
12 400 Vac, 20KA, 8x31mm
16 400 Vac, 20KA, 8x31mm
20 400 Vac, 20KA, 8x31mm
25 400 Vac, 20KA, 8x31mm
LPVG812
LPVG816
LPVG820
LPVG825
I
I
I
I
3.78
3.78
3.78
3.78
Description
Cat. No.
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
1A 500Vac, 120KA, 10 x 38mm
2A 500Vac, 120KA, 10 x 38mm
4A 500Vac, 120KA, 10 x 38mm
6A 500Vac, 120KA, 10 x 38mm
8A 500Vac, 120KA, 10 x 38mm
10A 500Vac, 120KA, 10 x 38mm
12A 500Vac, 120KA, 10 x 38mm
16A 500Vac, 120KA, 10 x 38mm
20A 500Vac, 120KA, 10 x 38mm
LPVG101
LPVG102
LPVG104
LPVG106
LPVG108
LPVG1010
LPVG1012
LPVG1016
LPVG1020
Stock
Code
S
S
S
S
S
S
S
S
S
Price $
ex GST
4.26
4.26
4.26
4.26
4.26
4.26
4.26
4.26
4.26
Fuse-link 25A 500Vac, 120KA, 10 x 38mm
Fuse-link 32A 500Vac, 120KA, 10 x 38mm
LPVG1025
LPVG1032
S
S
4.26
4.26
Stock
Code
S
S
S
S
S
S
S
S
S
S
S
S
S
Price $
ex GST
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
7.02
Description
Cat. No.
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
LPVG141
LPVG142
LPVG144
LPVG146
LPVG148
LPVG1410
LPVG1412
LPVG1416
LPVG1420
LPVG1425
LPVG1432
LPVG1440
LPVG1450
1A 660Vac, 80KA 14 x 51mm
2A 660Vac, 80KA 14 x 51mm
4A 660Vac, 80KA 14 x 51mm
6A 660Vac, 80KA 14 x 51mm
8A 660Vac, 80KA 14 x 51mm
10A 660Vac, 80KA 14 x 51mm
12A 660Vac, 80KA 14 x 51mm
16A 660Vac, 80KA 14 x 51mm
20A 660Vac, 80KA 14 x 51mm
25A 660Vac, 80KA 14 x 51mm
32A 500Vac, 120KA 14 x 51mm
40A 500Vac, 120KA 14 x 51mm
50A 400Vac, 120KA 14 x 51mm
LPVG22 Fuse-links (4 to 125A) 22 x
1-75
Consumer and General Purpose Fuse-links
Consumer Fuse-links - LC/LD/LK
1
Eaton - MEM consumer Fuse-links for the protection of domestic and commercial
Applications mainly for lighting and heating circuits.
Consumer fuse-links feature:• Fuse-links with low watts loss, cooler running
• Complies to BS1361 1971 / BS 88:1
• LC Range - Breaking capacity : 16.5KA at 240Vac
Description
Ferrule Fuse-link 2A 240Vac 6.3 x 25mm
Description
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
5A 240Vac 10.3 x 26mm
8A 240Vac 10.3 x 26mm
10A 240Vac 10.3 x 26mm
15A 240Vac 10.3 x 26mm
20A 240Vac 10.3 x 26mm
Alternate
Number
LC5
LC8
LC10
LC15
LC20
6A 240Vac 12.7 x 29mm
10A 240Vac 12.7 x 29mm
16A 240Vac 12.7 x 29mm
20A 240Vac 12.7 x 29mm
25A 240Vac 12.7 x 29mm
30A 240Vac 12.7 x 29mm
Alternate
Number
LD6
LD10
LD16
LD20
LD25
LD30
Description
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Alternate
Number
LA2
LA5
Cat. No.
Unit Price $
ex GST
5.67
5.67
Stock
Code
S
S
S
S
S
Unit Price $
ex GST
6.04
6.04
6.04
6.04
6.04
3006LC
3010LC
3016LC
3020LC
3025LC
30LC
Stock
Code
S
S
S
S
S
S
Unit Price $
ex GST
7.12
7.12
7.12
7.12
7.12
7.12
3045LC
S
Cat. No.
Stock
Code
S
S
S
Unit Price $
ex GST
12.52
12.52
12.52
Stock
Code
S
S
S
S
S
S
S
S
S
Unit Price $
ex GST
10.36
10.36
10.36
10.36
10.36
10.36
10.36
10.36
10.36
Cat. No.
1505LC
1508LC
1510LC
15LC
20LC
Cat. No.
Description
Stock
Code
S
S
5LC
Alternate
Number
LK35
LK40
LK45
35LCS
40LCS
45LCS
22.46
DR General Purpose Fuselinks
For general purpose use in industrial and commercial installation
• DR Range - Breaking capacity : 80KA at 415Vac
(ASTA 20 certified to BSEN60269-1 / BS 88:1)
Description
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
1-76
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
2A 415Vac 12.7 x 29mm
4A 415Vac 12.7 x 29mm
6A 415Vac 12.7 x 29mm
8A 415Vac 12.7 x 29mm
10A 415Vac 12.7 x 29mm
16A 415Vac 12.7 x 29mm
20A 415Vac 12.7 x 29mm
25A 415Vac 12.7 x 29mm
32A 415Vac 12.7 x 29mm
Alternate
Number
MD2
MD4
MD6
MD8
MD10
MD16
MD20
MD25
MD32
Pack Size
20
20
20
20
20
20
20
20
20
Cat. No.
2DR
4DR
6DR
8DR
10DR
16DR
20DR
25DR
32DR
Plug Top Fuse-links & Glass 3AG Fuse-Links
Plug Top Fuse-links
1
• 240V AC Complies to BS1362
• 6kA breaking capacity at 240V AC
Description
Plug Top
Plug Top
Plug Top
Plug Top
Plug Top
Plug Top
Plug Top
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Cat. No.
1A 240Vac 6.3 x 25.4mm
2A 240Vac 6.3 x 25.4mm
3A 240Vac 6.3 x 25.4mm
5A 240Vac 6.3 x 25.4mm
7A 240Vac 6.3 x 25.4mm
10A 240Vac 6.3 x 25.4mm
13A 240Vac 6.3 x 25.4mm
PL1
PL2
PL3
PL5
PL7
PL10
PL13
Stock
Code
S
S
S
S
S
S
S
Price $
ex GST
4.86
4.86
4.86
4.86
4.86
4.86
4.86
Stock
Code
S
S
S
S
S
S
S
S
Price $
ex GST
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
Stock
Code
S
S
S
S
S
S
S
S
Price $
ex GST
9.50
9.50
9.50
9.50
9.50
9.50
9.50
9.50
Glass 3AG Fuse-Links
3AG Fuse-links 250V AC• Low breaking capacity
Description
Cat. No.
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
6700500
6701000
6702000
6703150
6705000
6708000
6710000
6716000
500mA RAPID 240Vac 6.3 x 32mm
1A RAPID 240Vac 6.3 x 32mm
3.15A RAPID 240Vac 6.3 x 32mm
Miniature Fuse-links 5 x20mm
Glass Fuse-links 5 x 20mm 250V AC :• Low breaking capacity
Description
Cat. No.
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
PDC500
PDC1
PDC2
PDC3.15
PDC5
PDC8
PDC10
PDC15
500mA 5 x 20mm
1A 5 x 20mm
2A 5 x 20mm
3.15A 5 x 20mm
5A 5 x 20mm
8A 5 x 20mm
10A 5 x 20mm
15A 5 x 20mm
1-77
House Service Fuse-links
House Service Fuse-links
1
Eaton - MEM House Service Fuse-links for the protection of Domestic and
Commercial Applications. Eaton - MEM House Service fuse-links feature:• Fuse-links with low watts loss, cooler running
Description
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
10A 415Vac 22 x 57mm
15A 415Vac 22 x 57mm
20A 415Vac 22 x 57mm
30A 415Vac 22 x 57mm
40A 415Vac 22 x 57mm
45A 415Vac 22 x 57mm
Alternate
Number
ME10
ME15
ME20
ME30
ME40
ME45
Ferrule
Ferrule
Ferrule
Ferrule
Fuse-link
Fuse-link
Fuse-link
Fuse-link
50A 415Vac 22 x 57mm
60A 415Vac 22 x 57mm
80A 415Vac 22 x 57mm
100A 415Vac 22 x 57mm
ME50
ME60
ME80
ME100
30A
40A
50A
50A
80A
Alternate
Number
MF30
MF40
MF50
MF60
MF80
Description
Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
415Vac
415Vac
415Vac
415Vac
415Vac
30
30
30
30
30
x
x
x
x
x
57mm
57mm
57mm
57mm
57mm
Ferrule Fuse-link 100A 415Vac 30 x 57mm
10
10
10
10
10
10
10
10
10
10
Pack Size
10
10
10
10
10
10
MF100
Description
1-78
Pack Size
Pack Size
10
10
10
Cat. No.
104R
154R
204R
304R
404R
454R
Stock
Code
S
S
S
S
S
S
504R
604R
804R
1004R
S
S
S
S
Cat. No.
304RL
404RL
504RL
604RL
804RL
Stock
Code
S
S
S
S
S
1004RL
S
Cat. No.
Stock
Code
S
S
S
635R
805R
1005R
Unit Price $
ex GST
13.50
13.50
13.50
13.50
13.50
13.50
13.50
13.50
13.50
15.66
Unit Price $
ex GST
24.73
24.73
2473
24.73
24.73
24.73
Unit Price $
ex GST
37.47
39.20
52.59
House Service Fuse Bases
BELL House Service Fuse bases for the protection of domestic
and commercial applications. BELL House Service fuse-links
feature:• Compliance to AS2005
• Front and Back wiring models
• One hole fixing, quick and easy to mount
• Large entries, up to 50mm2 cable entries
• Anti Intrusion models
Description
Cat. No.
House service base, back, 2A fuse 22x58mm
House service base, front, 2A fuse 22x58mm
HSF2ABW
HSF2AFW
Description
Cat. No.
House
House
Hosue
House
HSF2BBW
HSF2BBWI
HSF2BFW
HSF2BFWI
service base, back, 2B fuse 30x58mm
service, back anti-intrusion 2B fuse
service base front, 2B fuse 30x58mm
service, front anti-intrusion 2B fuse
Stock
Code
S
S
Price $
ex GST
34.88
34.88
Stock
Code
S
S
S
S
Price $
ex GST
34.88
39.42
34.88
39.42
Stock
Code
S
Price $
ex GST
33.15
Stock
Code
S
Price $
ex GST
34.88
Price $
ex GST
604.80
Description
Cat. No.
Neutral Link, for meter panel, Victoria
E1000/B
Description
Cat. No.
QLD, back wired, clear body, meter isolation link
E1036SL
Description
Cat. No.
12 pole HSF chassis 315A, 262 x 252mm
HSF12P
Stock
Code
S
HSF18P
HSF24P
S
S
626.40
747.36
HSF36P
S
999.00
1-79
1
J-Type Pillar Fuse-Links
1
Designed for Utility distribution networks Eaton - MEM J-Type fuses features:• Fuse-links with low watts loss, cooler running
• Solder and riveted tags, for extra strength
Description
Pillar
Pillar
Pillar
Pillar
Pillar
Pillar
Pillar
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
63A 415Vac 48 x 39.5mm
80A 415Vac 48 x 39.5mm
100A 415Vac 48 x 39.5mm
125A 415Vac 48 x 39.5mm
160A 415Vac 48 x 39.5mm
200A 415Vac 48 x 39.5mm
250A 415Vac 48 x 39.5mm
Description
J-type
J-type
J-type
J-type
J-type
J-type
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
fuse-link 80A 415Vac 82mm
fuse-link125A 415Vac 82mm
1-80
20A
25A
32A
40A
50A
63A
415Vac 82mm
415Vac 82mm
415Vac 82mm
415Vac 82mm
415Vac 82mm
415Vac 82mm
Alternate
Number
JF63
JF80
JF100
JF125
JF160
JF200
JF250
63JCF
80JCF
100JCF
125JCF
160JCF
200JCF
250JCF
Alternate
Number
JPU20
JPU25
JPU32
JPU40
JPU50
JPU63
JPU80
JPU100
JPU125
JPU160
JPU200
JPU250
JPU315
JPU355
JPU400
Cat. No.
Stock
Code
I
I
I
I
I
I
I
Price $
ex GST
49.68
49.68
49.68
49.68
49.68
49.68
49.68
20JCS82
25JCS82
32JCS82
40JCS82
50JCS82
63JCS82
Stock
Code
I
I
I
I
I
I
Price $
ex GST
49.68
49.68
49.68
45.68
49.68
49.68
80JCS82
100JCS82
125JCS82
160JCS82
200JCS82
250JCS82
315JCS82
355JCS82
400JCS82
I
S
S
S
S
S
S
S
S
49.68
49.68
49.68
49.68
59.40
59.40
59.40
81.00
81.00
Cat. No.
Description
Cat. No.
20JCS92
25JCS92
32JCS92
40JCS92
50JCS92
63JCS92
80JCS92
100JCS92
125JCS92
Stock
Code
I
I
I
I
I
I
I
S
S
Unit Price $
ex GST
74.52
74.52
74.52
74.52
74.52
74.52
74.52
77.76
77.76
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
20A 415Vac 92mm
25A 415Vac 92mm
32A 415Vac 92mm
40A 415Vac 92mm
50A 415Vac 92mm
63A 415Vac 92mm
80A 415Vac 92mm
100A 415Vac 92mm
125A 415Vac 92mm
Alternate
Number
JSU20
JSU25
JSU32
JSU40
JSU50
JSU63
JSU80
JSU100
JSU125
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
160A 415Vac 92mm
200A 415Vac 92mm
250A 415Vac 92mm
315A 415Vac 92mm
355A 415Vac 92mm
400A 415Vac 92mm
450A 415Vac 92mm
500A 415Vac 92mm
JSU160
JSU200
JSU250
JSU315
JSU355
JSU400
JSU450
JSU500
160JCS92
200JCS92
250JCS92
315JCS92
355JCS92
400JCS92
450JCS92
500JCS92
S
S
S
S
S
S
S
S
77.76
86.40
86.40
86.40
86.40
86.40
167.40
167.40
J-type
J-type
J-type
J-type
fuse-link
fuse-link
fuse-link
fuse-link
560A 415Vac 92mm
630A 415Vac 92mm
710A 415Vac 92mm
800A 415Vac 92mm
JSU560
JSU630
JSU710
JSU800
560JCS92
630JCS92
710JCS92
800JCS92
S
S
S
S
167.40
167.40
340.20
340.20
Description
Cat. No.
J-type fuse-link 80A 415V, Silver Element
80JSS82
100JSS82
125JSS82
Stock
Code
I
I
I
J-type
J-type
J-type
J-type
J-type
J-type
160JSS82
200JSS82
250JSS82
315JSS82
355JSS82
400JSS82
I
I
I
I
I
I
Description
Cat. No.
80JSS92
100JSS92
125JSS92
Stock
Code
I
I
I
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
J-type
160JSS92
200JSS92
250JSS92
315JSS92
355JSS92
400JSS92
450JSS92
500JSS92
560JSS92
630JSS92
I
I
I
I
I
I
I
I
I
I
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
160A 415V, Silver Element
1
Unit Price $
ex GST
86.40
86.40
86.40
91.80
91.80
91.80
91.80
100.44
100.44
Unit Price $
ex GST
86.40
86.40
86.40
91.80
91.80
91.80
91.80
100.44
100.44
140.40
164.16
164.16
178.20
1-81
DIN Type Fuse-Links
DIN Type Fuse-Links
1
Designed for all distribution networks Eaton - MEM DIN fuse-links features:• Fuse-links with low watts loss, cooler running
• Live extraction tags
• Non-ferrous extraction tags, for corrosive environments
• AC Rating, 120kA, 500Vac to EN60269-2-1
• Dual indication of fuse 'blow' status
Description
Pack Size
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
000
000
000
000
000
000
000
000
000
6A 500Vac
10A 500Vac
16A 500Vac
20A 500Vac
25A 500Vac
32A 500Vac
35A 500Vac
40A 500Vac
50A 500Vac
DIN
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
000 63A 500Vac
000 80A 500Vac
000 100A 500Vac
00 125A 500Vac
00 160A 500Vac
Description
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Pack Size
1
1
1
1
1
1
1
1
1
25A 500Vac
35A 500Vac
50A 500Vac
63A 500Vac
80A 500Vac
100A 500Vac
125A 500Vac
160A 500Vac
200A 500Vac
DIN Fuse-link 1 224A 500Vac
DIN Fuse-link 1 250A 500Vac
1-82
3
3
3
3
3
3
3
3
3
3
3
Cat. No.
F5GG6U000
F5GG10U000
F5GG16U000
F5GG20U000
F5GG25U000
F5GG32U000
F5GG35U000
F5GG40U000
F5GG50U000
Stock
Code
S
S
S
S
S
S
S
S
S
F5GG63U000
F5GG80U000
F5GG100U000
F5GG125U00
F5GG160U00
S
S
S
S
S
Cat. No.
F5GG25U1
F5GG35U1
F5GG50U1
F5GG63U1
F5GG80U1
F5GG100U1
F5GG125U1
F5GG160U1
F5GG200U1
Stock
Code
S
S
S
S
S
S
S
S
S
F5GG224U1
F5GG250U1
S
S
Unit Price $
ex GST
23.76
23.76
23.76
23.76
23.76
23.76
23.76
23.76
23.76
23.76
23.76
23.76
30.24
30.24
Unit Price $
ex GST
37.26
37.26
37.26
37.26
37.26
37.26
37.26
37.26
37.26
37.80
37.80
DIN Type Fuse-Links
Pack Size
Description
Cat. No.
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
2
2
2
2
2
2
2
2
2
35A 500Vac
50A 500Vac
63A 500Vac
80A 500Vac
100A 500Vac
125A 500Vac
160A 500Vac
200A 500Vac
224A 500Vac
3
3
3
3
3
F5GG35U2
F5GG50U2
F5GG63U2
F5GG80U2
F5GG100U2
F5GG125U2
F5GG160U2
F5GG200U2
F5GG224U2
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
2
2
2
2
250A 500Vac
315A 500Vac
355A 500Vac
400A 500Vac
3
3
3
3
F5GG250U2
F5GG315U2
F5GG355U2
F5GG400U2
3
3
3
3
3
315A 500Vac
355A 500Vac
400A 500Vac
500A 500Vac
630A 500Vac
Description
DIN
DIN
DIN
DIN
DIN
Fuse-link
Fuse-link
Fuse-link
Fuse-link
Fuse-link
3
3
3
3
Pack Size
3
3
3
1
1
Cat. No.
F5GG315U3
F5GG355U3
F5GG400U3
F5GG500U3
F5GG630U3
Stock
Code
S
S
S
S
S
S
S
S
S
Price $
ex GST
56.97
56.97
56.97
56.97
56.97
56.97
56.97
56.97
56.97
S
S
S
S
56.97
56.97
56.97
56.97
Stock
Code
S
S
S
S
S
Price $
ex GST
91.80
91.80
91.80
91.80
91.80
1
Range of quick-acting and slow-acting DIN fuses are also available. Please contact Eaton for details.
DIN Type Solid Links
Description
Cat. No.
DIN Solid copper link size 00 160A
KS00
Stock
Code
S
Price $
ex GST
41.04
KS01
KS02
S
S
49.68
56.16
KS03
S
68.04
1-83
NH-fuse switch disconnectors, 100 to 630A :• Safe operation, IP20 in closed position.
• Halogen free and self extinguishing material
• Versions for direct installation on to busbar
• High short circuit strength 80kA
• Tested to IEC 947.3
1
M.Schneider Multibloc: Single Pole Surface Mount Switch Disconnectors
Description
160A DIN Size 00, with M8 bolt connection
DIN Link
Size
000, 00
1
Cat. No.
1000053
1000388
Stock
Code
S
S
Price $
ex GST
127.44
345.60
Stock
Code
S
S
S
S
S
I
Price $
ex GST
155.35
140.40
432.00
583.20
301.80
4,781.16
I
5,945.40
M.Schneider Multibloc: 3 Pole Surface Mount Switch Disconnectors
Description
100A DIN Size 000, 1.5 - 50mm2 terminal clamps
1250A DIN Size 4a, with M16 bolt connection
DIN Link
Size
000
000, 00
1
2
3
4a
Cat. No.
C00ST601
1000064
1000299
1000504
1001125
1000090
1600A DIN Size 4a, with 2 x M12 bolt connection
4a
1000092
M.Schneider: 3 Pole Busbar Mount (60mm Busbar Systems)
Description
DIN Link
Size
Cat. No.
Stock
Code
Price $
ex GST
100A DIN Size 000, Busbar mount, 1.5 - 50mm2 terminal clamps
160A DIN Size 00, Busbar mount, with M8 bolt connection
000
000, 00
1
2
1001044
1000115
1000323
1000704
I
S
S
I
336.96
210.06
662.04
972.00
M.Schneider Multibloc: Terminal Covers & Auxiliary Contacts (Door Position Indication)
Description
Cat. No.
Terminal cover kit to suit surface mount 160A DIN Size 00 switch
Terminal cover to kit suit surface mount 400A DIN Size 2 switch
1000148
1000382
1000861
Door indication switch to suit surface mount 100A DIN Size 000 switch
Door indication switch to suit busbar mount 100A DIN Size 000 switch
Door indication switch to suit busbar mount 160A DIN Size 00 switch
Door indication switch to suit all 250A, 400A & 630A DIN Size 1-3 switches
1000893
C00SZHID
1001046
1000157
1000852
89mm x 163mm x 74mm
63mm x 194mm x 101mm
185mm x 238mm x 111mm
185mm x 246mm x 137mm
205mm x 251mm x 130mm
205mm x 259mm x 157mm
1-84
Switch Type
(3 Pole)
100A 000
100A 000
160A 00
160A 00
250A 1
250A 1
400A 2
400A 2
Mounting
Type
Surface
Busbar
Surface
Busbar
Surface
Busbar
Surface
Busbar
Stock
Code
S
S
S
Price $
ex GST
14.58
37.15
63.18
S
S
I
I
S
63.18
44.60
44.60
61.45
44.60
Max Cable
Size
50mm2
50mm2
70mm2
70mm2
150mm2
150mm2
240mm2
240mm2
Busbar System 60mm Tri60
Busbar System 60mm
1
TRI 60 Modular busbar system features:• Current ratings up to 630A AC uoto 690V
• Up to 70kA Dynamic short-circuit strength with
back up fuses
11
• Busbar width 12-30mm and thickness 5-10mm
• Quick and easy installation reduces installation
time
• Snap-on modular housing for contactors, MCB or
motor starters
12
2
9
• Can Achieve IP20 protection with standard covers
• High thermal stability and self extingushing
synthetic material in covers and busbar supports.
6
13
7
3
1
5
10
4
8
ID
Description
Cat. No.
1
2
3
4
5
6
7
8
9
Busbar carrier, 2 internal fixing holes + 2 external fixing holes
Touch protection cover cap grey, 200 x 108 x 78mm, 16-185mm2
Busbar protection plate, width 108mm
Component adaptor, 45mm wide, 35 Amp, 3 x 6mm2 tails*
Universal support bar for component adaptor, width 45mm
100A DIN Size 000, Busbar mount, 1.5 - 50mm2 terminal clamps
16-185mm2 cable terminal clamp, suit 5mm bar
Compartmentalised busbar frame
1000752
1000773
1000775
1000786
1000790
1000115
1001044
1001157
1001075
Stock
Code
S
I
I
S
S
S
S
S
S
10
11
12
13
Insulated cover with slots
Insulated cover without slots
Cover for spare area
Lateral cover for busbar carrier, attachable to item 1001075
SAS0143
SAS0142
SAS0149
SAS0145
I
I
I
S
Price $
ex GST
52.81
92.12
33.48
103.24
8.47
210.06
336.96
33.48
32.72
99.57
99.57
96.55
32.72
M.Schneider: 3 Pole Busbar Mount (60mm Busbar Systems)
Busbar System - Other Products
Cat. No.
Insulated end cover, yellow with warning label
Copper Busbar 25x5mm, 2.4m long, 400 Amp
Copper Busbar 30x10mm, 2.4m long, 630 Amp
1001072
1001073
1000787
1000757
1000004
1000008
Stock
Code
S
S
S
S
I
I
Price $
ex GST
100.44
113.61
122.58
96.01
POA
POA
* Items ideal for mounting the Eaton XT IEC Contactor Range to 60mm busbar systems
1-85
Fuse Bases (DIN)
Fuse Bases (DIN)
1
MEM DIN Fuse Bases features:• Halogen free and self extinguishing material
• High short circuit strength 80kA
• Tested to IEC 947.3
Description
Single
Single
Single
Single
pole
pole
pole
pole
Cat. No.
fuse
fuse
fuse
fuse
base
base
base
base
160A bolted conn
250A bolted conn
400A bolted conn
630A bolted conn
Description
Triple
Triple
Triple
Triple
1-86
pole
pole
pole
pole
fuse
fuse
fuse
fuse
2NP00I
2NPII
2NP2I
2NP3I
Cat. No.
base
base
base
base
160A bolted conn
250A bolted conn
400A bolted conn
630A bolted conn
2NP00III
2NP1III
2NP2III
2NP3IIIA
Description
Cat. No.
Covers size 00
Covers size 1
Covers size 2
Covers size 3
(2 covers required per pole)
KOO
IK1
IK2
IK3
Description
Cat. No.
Phase Barriers size 1
ZP1
ZP2
ZP3
Description
Cat. No.
Extraction Handle
HANDLELGE
Stock
Code
S
S
S
I
Price $
ex GST
46.65
87.37
93.63
140.40
Stock
Code
S
S
S
I
Price $
ex GST
104.60
213.84
313.20
426.60
Stock
Code
I
I
I
I
Price $
ex GST
30.24
20.41
22.46
27.54
Stock
Code
I
I
I
Price $
ex GST
16.03
24.19
29.60
Stock
Code
S
Price $
ex GST
97.09
Photo Electric Controllers
Photo Electric Controllers
SELC Street Light Controllers features:• A highly regulated transformer power supply
• State-of-the art mirco-controlled circuitry for control, R.A.T. switch sequencing
• Relay Assisted Triac (R.A.T.) sold state switching circuit.
• All SELC PECU’s are fitted with mains transients suppressors so as to increase both
the life of the unit and lantern
• The hard-wired configuration for high vandalism areas.
Description
Cat. No.
SELC 841 20 LUX 1:2 230Vac PE Cell
SELC 841-H hardwire 20LUX 1:2 230Vac PE
SELC 841 20A 20LUX 1:2 230Vac PE Cell
841077
841078
841079
Description
Cat. No.
SELC 844 Wall mount NEMA socket
SELC 843 NEMA socket
SELC 843 NEMA socket C/W studs
844001
843002
843003
Description
Cat. No.
SELC 849 1P 20LUX 1:2 230Vac PE Cell
SELC 849 2P 20LUX 1:2 230Vac PE Cell
849031
849032
Description
Cat. No.
SELC Time
SELC Time
SELC Time
SELC Time
Clock
Clock
Clock
Clock
SET-45/18
SET-45/18
SET-45/18
SET-45/18
38S
33S
32S
28S
MELB
SYD
PERTH
BRIS
SET4518/38S
SET4518/33S
SET4518/32S
SET4518/28S
Description
Cat. No.
SELC 70WATT BALLAST C/W PE Cell
200033
200034
200035
Stock
Code
S
I
I
Price $
ex GST
146.88
146.88
146.88
Stock
Code
I
I
I
Price $
ex GST
5.94
12.85
15.66
Stock
Code
S
S
Price $
ex GST
138.78
145.80
Stock
Code
I
I
I
I
Price $
ex GST
520.56
520.56
520.56
520.56
Stock
Code
I
I
I
Price $
ex GST
694.44
799.20
694.44
1-87
1
Semi-Conductor (BS88)
1
NEW
Lawson BS88 Fuse-links for Semi-Conductor Protection
Fuse-links for the protection of semiconductor devices act very rapidly to interrupt
overcurrents since the devices are highly susceptible to fault conditions.
To minimize the fault current let-through into the device the fuse-links are
designed for high speed operation. The fuse-links are essentially short circuit
protection devices with the classification 'aR".
Lawson Fuses offer a comprehensive range of high speed fuse-links to British
Standards. The 240 and 690 Volt series comply with the performance and
dimensional requirements of BS88: Part 4 and IEC 60269-4 and have also been
independently Certified by ASTA.
Single body offset tag type, 2 hole fixing
240V AC, 120V DC Rated Breaking Capacities: 100kA at 240V AC and 100kA at 120V DC
2
Current
Rating
(Amps)
10
12
16
20
25
30
32
35
40
Total I T
at 240V
A2 sec
26
45
85
140
240
420
420
500
650
50
60
63
75
80
100
125
160
1200
1900
1900
2800
3100
5000
5500
6500
3.3
4
4.3
5.7
6
7.5
12
19.5
180
125
150
160
175
200
250
300
350
450
8700
7000
10700
12500
13800
18500
27500
39000
67000
96000
24
9
11
12
13
16.5
20
25
29
44.5
Watt Loss
at IN
(Watts)
0.85
0.9
1.1
1.4
1.7
1.9
2.2
2.3
2.8
Fixing
Centres
(mm)
41.8
41.8
41.8
41.8
41.8
41.8
41.8
41.8
41.8
Pack
Size
Stock
Code
Cat
Number
Price $
ex GST
(each)
25.48
25.48
25.48
25.48
25.48
25.48
25.48
25.48
25.48
5
5
5
5
5
5
5
5
5
S
I
S
I
S
I
I
S
I
LSCA10
LSCA12
LSCA16
LSCA20
LSCA25
LSCA30
LSCA32
LSCA35
LSCA40
41.8
41.8
41.8
41.8
41.8
41.8
41.8
41.8
5
5
5
5
5
5
5
5
S
I
I
S
S
S
S
S
LSCA50
LSCA60
LSCA63
LSCA75
LSCA80
LSCA100
LSA125
LSA160
25.48
25.48
25.48
25.48
28.51
28.51
30.34
30.34
41.8
59
59
59
59
59
59
59
59
59
5
5
5
5
5
5
5
5
5
5
I
I
I
S
I
S
S
I
I
I
LSA180
LSCA125
LSCA150
LSCA160
LSCA175
LSCA200
LSCA250
LSCA300
LSC350
LSC450
30.34
58.53
58.53
58.53
58.53
58.53
59.40
59.40
68.90
68.90
Dual body central tag type, 2 hole fixing
Current
Rating
(Amps)
300
400
500
630
800
900
1-88
Total I2T
at 240V
A2 sec
42000
88000
145000
214000
335000
385000
Watt Loss
at IN
(Watts)
26
30
38
50
78
95
Fixing
Centres
(mm)
59
59
59
59
59
59
Pack
Size
2
2
2
2
2
2
Stock
Code
I
I
I
I
I
I
Cat
Number
LSAD300
LSCAD400
LSCAD500
LSCAD630
LSAD800
LSAD900
Price $
ex GST
(each)
137.70
137.70
137.70
137.70
188.46
188.46
Semi-Conductor (BS88)
Single body offset tag type, 2 hole fixing
Current
Rating
(Amps)
Total 12T
at 690V
A2 sec
10
16
20
25
32
40
45
55
63
35
80
130
200
370
700
900
1450
2100
2.5
3.8
4.5
5.8
6.8
8
8.5
10.4
11.5
63.5
63.5
63.5
63.5
63.5
63.5
63.5
63.5
63.5
5
5
5
5
5
5
5
5
5
S
S
S
S
S
S
I
S
S
LSCB10
LSCB16
LSCB20
LSCB25
LSCB32
LSCB40
LSCB45
LSCB55
LSCB63
27.54
27.54
27.54
27.54
30.34
31.21
31.21
31.21
32.18
70
80
100
160
200
225
250
315
2800
3500
6800
14500
30000
40000
53000
97000
12.8
14.5
16
27.5
31
35
37
47
63.5
63.5
63.5
85
85
85
85
85
5
5
5
5
5
5
5
5
I
S
S
I
S
I
S
I
LSCB70
LSCB80
LSCB100
LSCB160
LSCB200
LSCB225
LSCB250
LSCB315
33.91
33.91
33.91
79.27
79.27
79.27
81.00
81.00
350
140000
57
85
5
I
LSCB350
84.02
Watt Loss
at IN
(Watts)
Fixing
Centres
(mm)
Pack
Size
Stock
Code
Cat
Number
1
Price $
ex GST
(each)
Dual body central tag type, 2 hole fixing
Current
Rating
(Amps)
Total 12T
at 240V
A2 sec
65
75
85
90
100
110
120
125
140
1600
2300
3000
3600
5200
5900
7400
8200
11000
12
14.5
16.2
16.6
18.5
21
22
23
24.5
70
70
70
70
70
70
70
70
70
2
2
2
2
2
2
2
2
2
I
S
S
I
I
S
S
I
I
LSCBT65
LSCBT75
LSCBT85
LSCBT90
LSCBT100
LSCBT110
LSCBT120
LSCBT125
LSCBT140
65.12
65.12
65.12
65.12
66.04
66.04
67.80
67.80
69.76
150
160
180
200
300
350
400
500
550
630
710
13000
14500
23000
30000
67000
110000
147000
277000
360000
520000
600000
26.4
28
30
31
47
55
60
68
72
83
94
70
70
70
70
85
85
85
85
85
85
85
2
2
2
2
2
2
2
2
2
2
2
S
S
I
I
I
I
I
I
I
I
I
LSCBT150
LSCBT160
LSCBT180
LSCBT200
LSCBD300
LSCBD350
LSCBD400
LSCBD500
LSCBD550
LSCBD630
LSBD710
69.76
71.71
76.51
76.51
153.68
156.33
168.69
183.60
183.60
183.60
188.46
Watt Loss
at IN
(Watts)
Fixing
Centres
(mm)
Pack
Size
Stock
Code
Cat
Number
Price $
ex GST
(each)
Please contact Eaton for the full Lawson Fuse dimensional details. Other Amp ratings are available within the Lawson range.
1-89
Fuse Comparison Chart
1
Clip-In Fuse-links
For industrial application and general back-up protection. Complies to BS88 Part 6 & IEC60269-2 2006
All bold part numbers are Eaton Electric product offerings.
Amp
Rating
2 to 32
16 to 63
BS
Ref
F1
F2
Length
Eaton
MEM
SN2
SP
60mm
67mm
Lawson
NS
MES
Alstom
GE
NS
ES
Bussmann
Siemens
NSD
ESD
3NW NS
3NW ES
Bolt-in Fuse-links
For industrial application and general back-up protection. Complies to BS88 Part 1 & 2 & IEC60269-1 & IEC60269-2 2006
Amp
Rating
Offset Tags
2 to 32
2 to 32
35 to 63
80 to 100
25 to 100
125 to 200
Centre Tags
2 to 32
BS
Ref
40 to 63
2 to 32
40 to 63
80 to 100
125 to 200
250 to 315
355 to 400
250 to 315
355 to 400
450 to 630
450 to 630
710 to 800
710 to 800
1000 to 1250
C1
C2
C3
D1
Fixing
Centres
Eaton
MEM
Lawson
Alstom
GE
Bussmann
44mm
73mm
73mm
73mm
94mm
94mm
SA2
SB3
SB4
SO
SD5
SD6
NIT
TIA
TIS
TIS
TCP
TFP
NIT
TIA L
TIS L
OS
TCP L
TFP
NITD
AAO
BAO
OSD
CEO
DEO
3NW NIT
3NW TIA
3NW TIS
3NW OS
3NW TCP
3NW TFP
-
97mm
SE3
TB
TB
AC
3NW TB
B1
B1
B1
B2
B3
B4
-
97mm
111mm
111mm
111mm
111mm
111mm
111mm
133mm
SE4
SF3
SF4
SF5
SF6
SF7
SF8
SG7
TB
TBC
TBC
TC
TF
TKF
TMF
TKM
TB
TBC
TBC
TC
TF
TKF
TMF
TKM
BC
AD
BD
CD
DD
ED
ED
EFS
3NW TB
3NW TBC
3NW TBC
3NW TC
3NW TF
3NW TKF
3NW TMF
3NW TKM
133/184mm
133/184mm
165/229mm
133/184mm
165/229mm
149mm
SH8
SH9
SY9
SH10
SY10
SJ11
TM
TTM
TT
TLM
TLT
-
TM
TTM
TT
TLM
TLT
TXU
EF
FF
FG
GF
GG
GH
3NW TM
3NW TTM
3NW TT
3NW TLM
3NW TLT
3NW TXU
A1
A2
A3
A3
A4
-
Siemens
Consumer Fuse-links
Domestic service installations. Complies to BS1361 & IEC60269-3 2006
Amp
Rating
10 to 100
30 to 100
Dimensions
22 x 57mm
30 x 57mm
Eaton
MEM
_4R
_4RL
Lawson
ME
MF
Alstom
GE
RHF
RHLF
Bussmann
Siemens
_KR85
_LR85
3NW RHB
3NW RHLB
Bussmann
Dorman
_NHC00G
_NH00G
_NH1G
_NH2G
_NH3G
Siemens
DIN 'NH' Type
For industrial application and general back-up protection. Complies to EN60269-2-1 & VDE 0636
Amp
Rating
6 to 100
125 to 160
25 to 250
40 to 400
315 to 630
1-90
DIN
Size
000
00
1
2
3
Eaton
MEM
F5GG__U000
F5GG__U00
F5GG__U1
F5GG__U2
F5GG__U3
Lawson
LSPN000
LSPN00
LSPN1
LSPN2
LSPN3
Alstom
GE
NHG00-0
NHG00
NHG1
NHG2
NHG3
3NA2
3NA2
3NA2
3NA2
3NA3
8
8
1
2
3
Fuselink Selection for Motor Circuit Protection
1
The following table shows the minimum recommended fuselink sizes required to protect typical
3 phase 415V ac induction motors. Recommendations are based on the assumption that starting
conditions are 8 x f.l.c. for 6 seconds d.o.l. and 4 x f.l.c. for 12 seconds star-delta.
MOTOR RATING
kW
0.19
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
150
160
185
200
220
280
295
315
355
400
450
HP
0.25
0.50
0.75
1.00
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
200
220
250
270
300
375
400
430
483
545
612
D.O.L. STARTING
Approx
Motor FLC
Standard
gG
0.7
1.3
1.6
1.8
2.6
3.4
5.0
6.5
8.0
11
15
22
28
36
39
52
69
79
96
135
156
189
224
255
275
318
339
374
460
500
535
580
646
725
4
6
10
10
10
16
16
20
20
32
40
50
63
80
80
100
160
160
200
250
250
355
400
450
450
500
500
560
630
710
710
710
800
1000
Motor circuit
gM
20M32
32M40
32M50
32M63
63M80
63M80
63M100
100M160
100M160
100M200
200M250
200M250
315M400
315M400
400M500
400M500
400M500
400M500
Assisted Start
Standard
Fuse-link gG
2
4
4
4
6
10
10
16
16
16
20
32
35
50
50
63
100
100
125
160
160
200
250
315
315
355
355
400
500
500
560
630
710
800
ISSUE: 4
APPROVED: ARCM
DATE: 30.06.06.
1-91
Street Lighting Fuse-links
Street Lighting Fuse-links
1
Eaton - MEM Street Lighting fuse-links for use in single Phase of Street
Light Cut-outs or similiar installations.
Eaton - MEM Street Lighting fuse-links feature:• Fuse-links with low watts loss, cooler running
• AC Rating, 50kA, 240V to BS88 - 1
Description
Lighting
Lighting
Lighting
Lighting
Lighting
Lighting
Lighting
Lighting
1-92
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
fuse-link
Cat. No.
2A 240Vac 38mm
4A 240Vac 38mm
6A 240Vac 38mm
10A 240Vac 38mm
16A 240Vac 38mm
20A 240Vac 38mm
25A 240Vac 38mm
32A 240Vac 38mm
LST2
LST4
LST6
LST10
LST16
LST20
LST25
LST32
Stock
Code
I
I
S
S
I
I
I
I
Price $
ex GST
10.80
10.80
7.77
7.77
10.80
10.80
10.80
10.80
Eaton Bill Street Cut-outs
Eaton Bill Street Cut-outs
Designed for the thermal and short circuit protection of all street lights Bill Street Light
Cut-outs features:• High impact strength, improved safety during accidental pole damage
• Easy to connect, reduced installation time
• Variety of combinations and connections, suit every application
• Compact dimensions, fit into small poles designs
• High degree of protection, increased operator safety
Description
Cat. No.
Single circuit, Single pole PVC grommets
Single circuit , Single Pole, Steel Wire Armour
SL3S1
SL3S1A
Description
Cat. No.
Single circuit + Double Pole, PVC grommets
Single circuit + Double Pole, Steel Wire Armour
SL3D1
SL3D1A
Description
Cat. No.
Double circuit + Double Pole, PVC grommets
Double circuit + Double Pole, Steel Wire Armour
SL3D2
SL3D2A
Description
Cat. No.
Single circuit with common N/E, PVC grommets
SL3S1NE
Description
Cat. No.
Double circuit with common N/E, PVC grommets
SL3S2NE
Description
Bill
Bill
Bill
Bill
street
street
street
street
cut-out
cut-out
cut-out
cut-out
Cat. No.
extension
extension
extension
extension
box,
box,
box,
box,
empty
with two incoming terminals
with four terminals
lug terminals
SL3B
SL3B2
SL3B4
SL3B4L
Stock
Code
I
I
Price $
ex GST
73.44
115.56
Stock
Code
I
I
Price $
ex GST
99.36
131.76
Stock
Code
S
I
Price $
ex GST
111.24
140.40
Stock
Code
S
Price $
ex GST
97.20
Stock
Code
I
Price $
ex GST
109.08
Stock
Code
I
I
I
I
Price $
ex GST
69.01
139.32
233.71
167.29
Stock
Code
I
Price $
ex GST
43.52
Price $
ex GST
80.56
3.78
4.65
23.22
31.21
3.24
3.99
114.15
Description
Cat. No.
Steel wire armour gland, max 18mm cable diameter
SL3A
Description
Cat. No.
Tapped plate for 20mm diameter compression glands
PVC cap for use with SL3A unused entries
20mm plug for use with SL3G unused entries
Auxiliary terminal, use with SL3B4L, 10mm2
Brass gland plate, 3 x 25mm2
Rubber 20mm blanking plug,
SL3G
SL3AC
SL3GP
SL3BAT
SL3BG
SL3P20
Stock
Code
I
I
I
I
I
I
Rubber 25mm blanking plug,
Double circuit + Double Pole, PVC grommets + MEN Link
SL3P25
SL3SD2
I
S
1-93
1
Multivert Strip Disconnectors
Designed for the thermal and short circuit protection of LV distribution networks.
Multivert strip disconnectors features:• Reversable connections, top or bottom connection
• Single or triple pole switching options
• Halogen free, self extinguishing materials
• Optional Electronic System Monitors
1
Strip Disconnectors (Fused)
Incoming-Rear to Busbar : Outgoing bottom connected
Amp
Rating
DIN Link
Size
Switching
Type
Busbar
Spacing
Bolt
Connection
160
250
250
400
400
630
630
000, 00
1
1
2
2
3
3
3
3
1
3
1
3
1
185mm
185mm
185mm
185mm
185mm
185mm
185mm
M8
M10
M10
M12
M12
M12
M12
x
x
x
x
x
x
x
1P
1P
3P
1P
3P
1P
3P
Cat. No.
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
365.04
509.76
509.76
550.80
567.00
642.60
653.40
Cat. No.
Stock
MV4B101K000G
MV5B101K000G
I
I
Price $
Code
1895.40
2100.60
M01N0G
1100000
1150000
1200000
1250000
1300000
1350000
Double Vertical Switches
Amp
Rating
800 (2x400)
1260 (2X630)
DIN Link
Size
2
3
Switching
Type
3 x 1P
3 x 1P
Busbar
Spacing
185mm
185mm
Strip Disconnectors - Solid Links
Amp
Rating
1000
1000
DIN Link
Size
Fitted
Fitted
Switching
Type
3 x 1P
1 x 3P
Busbar
Spacing
185mm
185mm
Cat. No.
MV7M101K000G
MV7M301K000G
Stock
I
I
Price $
Code
1744.20
1744.20
Stock
Code
I
I
I
I
Price $
ex GST
257.04
468.72
467.25
633.96
NH Vertical Fuse Bases
(with touch protection)
• Compliance to IEC 60269-1,2
• Complements Multivert Range
Vertical Fuse Bases
Amp
Rating
160
250
400
630
1-94
DIN Link
Size
000,00
1
2
3
Busbar
Spacing
185mm
185mm
185mm
185mm
Bolt
Connection
M8
M10
M12
M12
Cat. No.
01BSLN100
BL1B403K000
BL2B403K000
BL3B403K000
Cable Distribution Cabinets / Pillar Boxes
Pillar Boxes
1
Elsta Pillar products are at the forefront of modern design. Elsta is the
logical enclosure solution for all LV outdoor underground & concrete
padmount distribution networks.
Elsta pillars are supplied ready to accept vertical fuse strip products for
installation in the harshest conditions. All Elsta pillar products are
supplied with a 'patented' fleece layer for increased longlife UV
protection, to provide you with peace of mind.
Pillar Boxes
Elsta X-Series
Description
Part
Number
Stock
Code
Price $
ex GST
AKF3 Street Distribution Pillar Box
869mm H x 460mm W x 320mm D Pillar enclosure complete with 50x5mm Ni-plated 3 phase
busbar, neutral bar & earth clamp suitable for 185mm type fuse strip product supplied with Hasp
& Staple door lock arrangement. AFK3 - Will accept up to 3 vertical strip fuse units.
AFK3
S
1760.40
AFK4
S
1882.44
AFK5
S
2195.64
AFK6
S
2891.16
Pillar Bases
Elsta X-Series
Description
Part
Number
Underground Cable Pillar Base to suit AFK3
Optional KSR Black Base Mounting Grid for BASE-AFK3-U
Concrete Padmount Cable Pillar Base to suit AFK3
Accessories
Pan
Pan
Pan
Pan
(laminated
(laminated
(laminated
(laminated
Price
ex GST
BASE-AFK3-U
BASE-AFK4-U
BASE-AFK5-U
BASE-AFK6-U
BG-AFK3
S
S
S
S
I
642.60
694.44
795.96
972.00
66.96
BG-AFK4
BG-AFK5
BG-AFK6
BASE-AFK3-C
BASE-AFK4-C
BASE-AFK5-C
BASE-AFK5-C
I
I
I
S
S
S
S
71.28
89.64
103.68
793.80
858.60
907.20
1112.40
Part
Number
Stock
Code
Price
ex GST
MP-AFK3
MP-AFK4
MP-AFK5
MP-AFK6
I
I
I
I
247.32
259.20
397.44
642.60
Elsta X-Series
Description
Mounting
Mounting
Mounting
Mounting
Stock
Code
phenolic
phenolic
phenolic
phenolic
resin)
resin)
resin)
resin)
to
to
to
to
suit AFK3
suit AFK4
suit AFK5
suit AFK6
1-95
HOLEC QM Switch Disconnectors
HOLEC QM Switch Disconnectors 40-100A
1
Designed for general and industrial applications Holec QM
Switch Disconnectors features:•
•
•
•
•
Safe operation, IP20 terminals
Snap-on DIN rail mounting
Compliance to IEC 60947-3
QM40 & QM63 have tunnel terminals suitable for 2.5mm - 16mm2 conductor.
QM80 & QM100 have tunnel terminals suitable for 10mm - 35mm2 conductor.
Holec QM Version A: Door Mount (Switch Only)
Current
Rating
40A
63A
80A
100A
40A
63A
80A
100A
AC-23A kW
415V
15kW
22kW
30kW
37kW
15kW
22kW
30kW
37kW
Description
QM
QM
QM
QM
QM
QM
QM
QM
Pack
Quantity
40 Load Break 3P, door mtg, Ver A
1
1
1
1
1
1
1
1
Part
Number
Stock
Code
Price $
ex GST
1319800
1319803
1319808
1319811
1319900
1319901
1319902
1319903
S
S
S
S
I
I
I
I
96.93
126.09
180.90
231.39
123.39
156.87
220.59
285.55
Part
Number
1319801
1319804
1319809
1319812
1319907
1319908
1319909
1319910
Stock
Code
S
S
S
S
S
S
S
S
Price $
ex GST
102.33
132.30
242.19
248.40
124.47
158.22
222.75
286.47
Part
Number
1319802
1319805
1319810
1319813
Stock
Code
S
S
S
S
Price $
ex GST
115.29
142.29
197.10
258.39
Part
Number
Stock
Code
Price $
ex GST
Holec QM Version B: Base Mount (Switch Only)
Current
Rating
40A
63A
80A
100A
40A
63A
80A
100A
AC-23A kW
415V
15kW
22kW
30kW
37kW
15kW
22kW
30kW
37kW
Description
QM
QM
QM
QM
QM
QM
QM
QM
40 Load Break 3P, base mtg, Ver B
Pack
Quantity
1
1
1
1
1
1
1
1
Holec QM Version C: Base Mount c/w Lockable Integral Handle
Current
Rating
40A
63A
80A
100A
AC-23A kW
415V
15kW
22kW
30kW
37kW
Description
QM
QM
QM
QM
Pack
Quantity
40 Load Break 3P, base mtg, Ver C
1
1
1
1
Holec QM Version D: Base Mount Multipole (Switch Only)
Current
Rating
AC-23A kW
415V
Description
Pack
Quantity
50A
22kW
QM 63 Load Break 6P, base mtg, Ver D
1
1319806
S
202.23
80A
50A
37kW
22kW
1
1
1319814
1319904
S
S
478.98
313.74
80A
37kW
1
1319905
S
570.24
1-96
Holec QM Switches & Panelboard Switches
Holec QM Version E: Base Mount Changeover 1-0-2 (Switch Only)
Current
Rating
63A
100A
63A
100A
AC-23A kW
415V
22kW
37kW
22kW
37kW
Description
QM
QM
QM
QM
Pack
Quantity
63 Load Break 3+3P, base mtg, Ver E
1
1
1
1
Part
Number
1319807
1319815
1319915
1319916
Stock
Code
S
S
S
S
1
Price $
ex GST
202.23
478.98
326.16
594.00
QM Switch Accessories
Description
Pack
Quantity
Part
Number
Stock
Code
Price $
ex GST
Handle (Black) for Version A,B & D - IP55 Rated
Handle (Red/Yellow) for Version A,B & D - IP55 Rated
Handle door coupling to be used with above handles for Version B&D switches
Handle, K-Line K1 - Compact type, with 6mm coup, IP65 for Version B&D switches
Handle, K-Line K2 - Larger type, with 6mm coup, IP65 for Version B&D switches
Handle, K-Line K2 - 3 Position, with 6mm door coup, IP65 for Version E switches
Handle, Direct mount, for Version B, D & E switches
Extension clamp 6x6mm (Required for Version B, D & E when using K-Line Handles)
Extension shaft 300mm long, 6x6mm (Required for
1
1
1
1
1
1
1
1
1319855
1319854
1319857
1818031
1818034
1818071
1818002
1319833
S
S
S
S
S
S
S
S
43.20
48.60
70.74
119.12
136.08
183.06
34.29
24.43
Version B, D & E when using K-Line handles)
QM40/63 Aux contact 1NO & 1NC, Version A
QM80/100 Aux contact 1NO & 1NC, Version A
QM40/63 Aux contact 1NO & 1NC, Version B, C, D & E
QM80/100 Aux contact 1NO & 1NC, Version B, C, D & E
Terminal cover 3 Pole QM40/63
1
1
1
1
1
1
1
1
1319831
1319850
1319852
1319851
1319853
1319870
1319872
1319871
S
S
S
S
S
S
S
S
16.36
37.04
47.73
35.64
45.84
6.80
17.92
8.96
Busbar connection kit, QM63 Version E
Busbar connection kit, QM100 Version E
1
1
1
1319873
1319969
1319967
S
S
S
17.92
47.84
118.47
Dumeco Panelboard Switches
• Fault-make/load-break isolators for fitting in panelboards as
main switches.
• Provides visible indication of contact position.
• Lockable in the ON & OFF Position
• 4 Pole units available on request
Description
Cat. No.
Main switch 3 pole 250A - DIN Cutout
Main switch 3 pole 400A - DIN Cutout
Terminal Cover for 250A Main Switch
Main switch to DIN chassis link kit 250A
Replacement handle with shaft
PB250MS3PD
PB400MS3PD
1314735
PB250LINK
4102003
Stock Code
Price $
S
S
S
S
S
550.80
680.40
44.49
47.62
32.40
ex GST
1-97
Eaton Holec DUMECO Switch Disconnectors
HOLEC DUMECO Switch Disconnectors 125-3600A
1
Designed for general and industrial applications - switchboard industries
Holec Switch Disconnectors features:• Safe operation, Visible Contact Separation (160-2000Amp)
• Add-on Aux contacts, for remote indication
• Shallow designed to fit in low depth and compact spaces
• 690V AC, 440V DC, KEMA certified
• Compliance to IEC 60947-3
• Utilisation Categories AC21A, AC22A and AC23A
• Excellent Technical Specifications
Holec Dumeco: 3 Pole Base Mount (Switch Only)
Current
Rating
AC-23A kW
415V
Rated Shortime
Withstand - Icw
Description
Part
Number
Stock
Code
Price $
ex GST
125A
160A
160A
250A
30kW
90kW
90kW
147kW
2.5kA - 1 Sec
8kA - 0.2 Sec
8kA - 0.2 Sec
10kA - 0.2 Sec
DMM125 3P+ Solid Neutral Switch
DMV160 3P Switch
DMV160 3P Switch, with tunnel terminals
DMV250 3P Switch
1314203
1814178
1814175
1814408
S
S
S
S
218.97
277.02
277.02
406.62
400A
630A
1000A
1250A
1600A
2000A
2500A
180kW
375kW*
425kW*
750kW
750kW
750kW
-
12kA - 0.3 Sec
28kA - 0.2 Sec
36kA - 0.3 Sec
50kA - 1 Sec
50kA - 1 Sec
50kA - 1 Sec
50kA - 1 Sec
DMV400 3P Switch
DMV630 3P Switch
DMV1000 3P Switch
DMV1250 3P Switch
DMV1600 3P Switch
DMV2000 3P Switch
DMS2500 3P Switch
1814411
1814442
1814445
1814590
1814595
1814065
1313333
S
S
S
S
S
S
S
580.50
718.20
1485.00
3338.28
4381.56
4600.80
8690.22
3150A
3600A
-
63kA - 1 Sec
63kA - 1 Sec
DMS3150 3P Switch
DMS3600 3P Switch
1313601
1313393
I
I
14492.52
28242.00
Description
Part
Number
Stock
Code
Price $
ex GST
Holec Dumeco: 4 Pole Base Mount (Switch Only)
Current
Rating
AC-23A kW
415V
Rated Shortime
Withstand - Icw
125A
160A
250A
400A
630A
1000A
1250A
1600A
2500A
30kW
90kW
147kW
180kW
375kW*
425kW*
750kW
750kW
-
2.5kA - 1 Sec
8kA - 0.2 Sec
10kA - 0.2 Sec
12kA - 0.3 Sec
28kA - 0.2 Sec
36kA - 0.3 Sec
50kA - 1 Sec
50kA - 1 Sec
50kA - 1 Sec
DMM125 4P Switch
DMV160 4P Switch
DMV250 4P Switch
DMV400 4P Switch
DMV630 4P Switch
DMV1000 4P Switch
DMV1250 4P Switch
DMV1600 4P Switch
DMS2500 4P Switch
1314204
1814179
1814410
1814413
1814444
1814447
1814592
1814597
1313334
S
S
S
S
S
S
S
S
I
226.80
431.19
486.00
698.76
891.00
1708.56
3785.40
5070.60
9180.00
3150A
-
63kA - 1 Sec
DMS3150 4P Switch
1313447
I
2587.40
Stock
Code
Price $
ex GST
* Products have an AC-23B kW rating.
Holec Dumeco: Handles & Shafts
Description
Part
Number
Shaft, DMM125, 6x6mm, 172mm long
Shaft, DMV160, 6x6mm, 270mm long
Shaft, DMV250/400, 10x10mm, 245mm long
Shaft, DMV630/1000, 14x14mm, 300mm long
Shaft, DMV1250/1600/2000, 14x14mm, 280mm long
Shaft, DMS2500/3150/3600, 14x14mm, 200mm long, with clamp
Handle, K-Line K2, with 6mm coup, IP65 for DMM125/DMV160
Handle, K-Line K3, with 10mm coup, IP65 for DMV250/400
Handle, K-Line K5, with 14mm coup, IP65 for DMV630/1000
Handle, K-Line K6, with 14mm coup, IP65 for DMV1250/1600/2000
& DMS2500/3150/3600
1-98
1314334
S
1314692
1050242
S
S
35.64
18.36
74.68
1050246
1050249
1050257
1818034
1818069
1818058
S
S
S
S
S
S
78.40
155.19
167.40
136.08
177.44
295.92
1818064
S
399.92
Eaton Holec Dumeco Accessories
1
0
1
2
Changeover
Multipole
Required Parts for Changeover Switch:
• 2 Switch Disconnectors
• 1 Changeover driving mechanism with position indication 1-0-2
• 1 Handle operating shaft
• 1 K-line operating handle (Changeover type)
Required Parts for Multipole Switches:
• 2 Switch disconnectors
• 1 Multipole driving mechanism with position indication I/O
• 1 Handle operating shaft
• 1 K-line operating handle
NB: All mechanisms are supplied with shafts to connect the switches to the mechanism, shaft is required to
join mechanism to handle.
Changeover / Multi-pole Mechanisms
Description
Part
Number
Stock
Code
Price $
ex GST
Dumeco Changeover Mechanism, 1-0-2, DMV160
Dumeco Changeover Mechanism, 1-0-2, DMV250/400
Dumeco Changeover Mechanism, 1-0-2, DMV630/1000
1314314
1314884
1314682
S
S
S
465.48
777.60
1060.56
Dumeco Multipole Mechanism, DMV160
Dumeco Multipole Mechanism, DMV250/400A
Dumeco Multipole Mechanism, DMV630/1000
Shaft, to suit 160A Mechanisms
Shaft, to suit 250/400A Mechanisms
Shaft, to suit 630/1000A Mechanisms
Handle, K-Line K2 - 3 Position, with 6mm door coup, IP65 for DMV160
Handle, K-Line K3 - 3 Position, with 10mm door coup, IP65 for DMV250/400
Handle, K-Line K5 - 3 Position, with 14mm door coup, IP65 for DMV630/1000
Handle, K-Line K2 - Multipole, with 6mm coup, IP65 for DMV160
Handle, K-Line K3 - Multipole, with 10mm coup, IP65 for DMV250/400
Handle, K-Line K5 - Multipole, with 14mm coup, IP65 for DMV630/1000
1314337
1314039
1314040
1314322
1050252
1050253
1818071
1818115
1818075
1818034
1818069
1818058
S
S
S
S
S
S
S
S
S
S
S
S
419.04
696.60
952.56
18.36
75.38
78.84
183.04
212.97
341.01
136.08
174.20
295.92
1-99
Eaton Holec QSA Switch Disconnector Fuses - SDFs
HOLEC QSA Switch Disconnector Fuses 40-800A
1
Holec Switch Fuse Disconnectors features:• Add-on Aux contacts, for remote indication
• High withstand strength, 80kA
• Self extinguishing material
• Ideal for motor protection, AC23 Rating
• Unique moving contact systems
Holec Q-Line QSA: 3 Pole Base Mount with BS88 Fuse Posts (Switch Only)
Frame Current
Size
0
40A
0
63A
1
63A
1
100A
1
125A
1
160A
2
2
2
2
3
3
200A
250A
315A
400A
630A
800A
AC-23B Amp
Rating
40A*
63A*
63A
100A
125A
160A
200A
250A
315A
400A
630A
800A
AC-23B kW
415V
22kW*
30kW*
30kW
55kW
59kW
90kW
Fuse
415V
A3
A3
A3
A4
B1-B2
B1-B2
Description
Type
QSA40N0 3P Fuse Switch BS
Part
1320200
1320202
1318011
1318016
1318020
1318023
110kW
147kW
184kW
220kW
375kW
500kW
B1-B2
B1-B4
B1-B4
B1-B4
C1-C3
C1-C3
QSA200N 3P Fuse Switch BS
QSA630 3P Fuse Switch BS
1319065
1319074
1319095
1319103
1318544
1319175
Stock
Number
S
S
S
S
S
S
Price $
Code
503.28
503.28
523.80
637.20
658.80
699.84
S
S
S
S
S
S
961.20
999.00
1026.00
1085.40
2381.40
3911.76
Part
Stock
Number
Price $
Code
Holec Q-Line QSA: 3 Pole Base Mount with DIN Fuse Posts (Switch Only)
Frame Current
Size
AC-23B Amp
Rating
AC-23B kW
415V
Fuse
415V
Description
Type
0
0
1
1
1
2
2
2
2
40A
63A
63A
125A
160A
200A
250A
315A
400A
40A*
63A*
63A
125A
160A
200A
250A
315A
400A
22kW*
30kW*
30kW
59kW
90kW
110kW
147kW
184kW
220kW
000-00
000-00
000-00
000-00
000-00
1-2
1-2
1-2
1-2
QSA40N0 3P Fuse Switch DIN
QSA200N 3P Fuse Switch DIN
1320201
1320203
1318027
1318030
1318033
1318547
1318526
1318548
1318533
I
I
I
I
I
I
I
I
I
540.00
540.00
550.80
675.00
727.92
1004.40
1033.56
1058.40
1137.24
3
630A
630A
375kW
3
QSA630 3P Fuse Switch DIN
1318542
I
2494.80
* Products have AC-23A rating.
Holec Q-Line QSA: Handles & Shafts
Description
Part
Number
Shaft, QSA40N0/63N0, 6x6mm, 300mm Long
Shaft, QSA63N1-QSA160N1, 8x8mm, 300mm Long
Shaft, QSA200N-QSA400N, 10x10mm, 300mm Long
Shaft, QSA630/800, 12x12mm, 115mm Long
Shaft Link, 12mmx12mm, required for QSA630/800
Handle, K-Line K2, with 6mm coup, IP65 for QSA40N0/QSA63N0
Handle, K-Line K2, with 8mm coup, IP65 for QSA63N1-QSA160N1
Handle, K-Line K3, with 10mm coup, IP65 for QSA200N-QSA400N
Handle, K-Line K4, with 12mm coup, IP65 for QSA630/800
1319831
1319311
1319319
1319331*
1319326*
1319336*
1818034
1818037
1818069
1818052
Stock
Code
Price $
ex GST
S
S
S
S
S
S
S
S
S
S
12.31
26.46
29.16
93.96
49.35
29.70
136.08
136.08
177.12
272.16
*Frame size 3 switches require 2 shafts and 1 link.
1-100
Eaton Holec QSA Plug-in Switch Disconnector Fuses
HOLEC QSA Switch Disconnector Fuses 63-800A
1
Eaton Holec Switch Disconnector Fuses features:• Add-on Aux contacts, for remote indication
• Plug-in, for easy replacement on site
• Ideal for Motor Isolation AC23 Rating
• Unique moving contact systems
Holec Q-Line QSA: 3 Pole Plug-In with BS88 Fuse Posts (Switch Only)
Frame Current
Size
1
63A
1
125A
1
160A
2
200A
2
250A
2
315A
2
3
3
400A
630A
800A
AC-23B Amp
Rating
63A
125A
160A
200A
250A
315A
400A
630A
800A
AC-23B kW
415V
30kW
59kW
90kW
110kW
147kW
184kW
Fuse
415V
A3
B1-B2
B1-B2
B1-B2
B1-B4
B1-B4
Description
Type
220kW
375kW
500kW
B1-B4
C1-C3
C1-C3
Part
1318046
1318047
1318048
1319063
1319084
1319098
Stock
Number
S
S
S
S
S
S
Price $
Code
804.60
831.60
859.68
1317.60
1360.80
1458.00
1319114
4100004
4100005
S
S
S
1463.40
3985.20
6021.00
Part
Stock
Number
I
I
I
I
I
I
Price $
Code
831.60
874.80
928.80
1409.40
1503.36
4055.40
Holec Q-Line QSA: 3 Pole Plug-In with DIN Fuse Posts (Switch Only)
Frame Current
Size
1
63A
1
125A
1
160A
2
250A
2
400A
3
630A
AC-23B Amp
Rating
63A
125A
160A
250A
400A
630A
AC-23B kW
415V
30kW
59kW
90kW
147kW
220kW
375kW
Fuse
415V
000-00
000-00
000-00
1-2
1-2
3
Description
Type
QSA630 3P Fuse Switch DIN
1318050
1318051
1318052
1319083
1319113
4100006
Holec Q-Line QSA:Handles / Shafts
Description
Part
Number
Stock
Code
Price $
ex GST
Shaft, QSA63N1-QSA160N1, 8x8mm, 300mm Long
Shaft, QSA200N-QSA400N, 10x10mm, 300mm Long
1319311
1319319
1319331*
S
S
S
26.46
29.16
93.96
Shaft Link, 12mmx12mm, required for QSA630/800
Handle, K-Line K2, with 8mm coup, IP65 for QSA40N1-QSA160N1
Handle, K-Line K3, with 10mm coup, IP65 for QSA200N-QSA400N
Handle, K-Line K4, with 12mm coup, IP65 for QSA630/800
1319326*
1319336*
1818037
1818069
1818052
S
S
S
S
S
49.35
29.70
136.08
177.44
272.16
Contact Eaton for Plug In 4 Pole Versions & Q-Quick Plug In Side Connection Fuse Switch Details
1-101
Eaton Holec Switch Disconnectors Type QA
1
Eaton Holec K-Line Handles
The K-Line handle was designed to enable a uniform handle design to be used with both the Dumeco & Q-Line
switch products. The design and range of product variations within the K-Line product range also allow it be used
on other manufactures switch products including circuit breakers to give a uniform appearance to the
switchboard. Importantly a higher level of safety is achieved because all switches are operated and locked in
identical and familiar fashion.
Features of the K-Line range are:
• The K-Line range of product can be fitted to products with a shaft diameter of 6, 8, 10, 12 & 14mm square.
• IP65 Ingress protection rating.
• Various locking applications e.g. padlock in ON position.
• Fixed position of the handle when the door is open.
Eaton Holec QA Switch Disconnectors 125A-1600A
Ideal for the switching of 3 phase AC motors.
Eaton Holec QA Switch Disconnectors features:• Add-on Aux contacts, for remote indication
•
•
•
•
690V AC, 440V DC, KEMA certified
Compliance to IEC 60947-3
Ideal for Motor Duty
High isolation level
Holec Q-Line QA: 3 Pole Base Mount (Switch Only)
Frame Current
Size
1
125A
1
160A
1
200A
2
400A
2
630A
3
1000A
1-102
AC-23B Amp
Rating
125A
160A
200A
400A
630A
1000A
AC-23B kW Rated Shortime
Description
415V
415V
Withstand - Icw
59kW
4kA - 1 Sec
QA125N1 Load Break Switch
90kW
4kA - 1 Sec
110kW
4kA - 1 Sec
220kW
15kA - 1 Sec
QA400N Load Break Switch
375kW
15kA - 1 Sec
QA630N Load Break Switch
600kW
50kA - 1 Sec
QA1000 Load Break Switch
Part
1318001
1318005
1318008
1318504
1318506
1319128
Stock
Number
S
S
S
S
S
S
Price $
Code
459.00
513.00
518.40
858.60
918.00
1960.20
Eaton Holec QA/QP/QE Switch Disconnectors
HOLEC QP Switch Disconnectors 250-3150A
1
Holec QP Switch Disconnectors features:• Add-on Aux contacts, for remote indication
• 690V AC, 440V DC, KEMA certified; Compliance to IEC 60947-3
• Ideal for general purpose switching
• High isolation level
Holec Q-Line QP: 3 Pole Base Mount (Switch Only)
Frame Current
Size
1
2
2
2
2
3
3
3
3
4
4
4
* These
AC-21B Amp
Rating
AC-21B Amp Rated Shortime
Description
415V
690V
Withstand - Icw
250A
250A
250A
8kA - 1 Sec
400A
400A
400A
30kA - 1 Sec
630A
630A
630A
30kA - 1 Sec
800A
800A
800A
30kA - 1 Sec
1000A
1000A
1000A
30kA - 1 Sec
1250A
1250A
1250A
50kA - 1 Sec
1600A
1600A
1400A
50kA - 1 Sec
2500A
2500A
2500A
80kA - 1 Sec
3150A
3150A
2500A
80kA - 1 Sec
2000A
2000A
2000A
80kA - 1 Sec
2500A
2500A
2500A
80kA - 1 Sec
3150A
3150A
2500A
80kA - 1 Sec
units are supplied complete with K-Line Handle & Shaft Kit
Part
QP250N1 Load Break Switch
QP400N Load Break Switch
QP1250 Load Break Switch
Stock
Number
1318036
1318508
1318511
1318514
1318516
1318556
1318557
1319141*
1319148*
1319031*
1319039*
1319047*
S
S
S
S
S
S
S
I
I
I
I
S
Price $
Code
545.40
874.80
928.80
1209.60
1323.00
2262.60
2392.20
11944.80
12733.20
8856.00
9099.00
9126.00
Holec Q-Line QE: 6 Pole Base Mount (Switch Only)
Frame Current
Size
1
2
200A
630A
AC-23B Amp
Rating
200A
400A
AC-23B kW
415V
Rated Shortime
Description
415V
Withstand - Icw
110kW
220kW
4kA - 1 Sec
15kA - 1 Sec
Part
QE200N1 6P Load Break Switch
QE630N 6P Load Break Switch
Stock
Number
1318065
1318561
S
S
Price $
Code
594.00
988.20
Holec Q-Line QA, QP & QE: Handles & Shafts
Description
Shaft, QA125N1-200N1, QP250N1, QE200N1, 8x8mm, 300mm Long
Shaft, QA400N/630N, QP400N-1000N, QE630N, 10x10mm, 300mm Long
Shaft, QA1000, QP1250/QP1600, 12x12mm, 115mm Long
Shaft, QA1000, QP1250/QP1600, 12x12mm, 300mm Long
Shaft Link, 12mmx12mm, required for QA1000, QP1250/ QP1600
Handle, K-Line K2, with 8mm coup, IP65 for QA125N1-200N1, QP250N1, QE200N1
Handle, K-Line K3, with 10mm coup, IP65 for QA400N/630N, QP400N-1000N, QE630N
Handle, K-Line K4, with 12mm coup, IP65 for QA1000, QP1250/QP1600
Handle, K-Line K6, with 12mm coup, IP65 for all QP2000-3150A Switches
Part
Number
Stock
Code
Price $
ex GST
1319311
1319319
1319331*
1319326*
1319336*
1818037
1818069
1818052
1818144
S
S
S
S
S
S
S
S
S
26.46
29.16
76.96
49.35
29.70
136.08
177.44
272.16
400.68
1-103
Eaton Holec Q-line / Dumeco Accessories
Auxiliary Contacts: Dumeco & Q-Line Switches
1
Description
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Max
Per Switch
contact
contact
contact
contact
contact
contact
contact
contact
contact
to
to
to
to
to
to
to
to
to
suit
suit
suit
suit
suit
suit
suit
suit
suit
DMM125 1NO + 1NC
DMM125 2NO + 2NC
DMV160 1NO + 1 NC
DMV250-DMV2000 1NO + 1 NC
DMS2500-DMS3600 4NO + 4NC
Q-Line switches - Frame Size 0, 1, 2 & 4, 1NO + 1NC
Q-Line switches - Frame Size 0, 1, 2 & 4, 2NO
Q-Line switches - Frame Size 3, 1NO + 1NC
Q-Line switches - Frame Size 3, 2NO
Pack
Quantity
Part
Number
Stock
Code
Price $
ex GST
1
1
2
2
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1314300
1314301
1314398
1314736
1313930
1319448
1319452
E22B11
E22B20
S
S
S
S
I
S
S
S
S
159.84
300.24
45.09
139.32
POA
55.08
82.08
34.13
34.13
1
1
1319454
S
116.64
Pack
Quantity
1
1
1
1
1
1
Part
Number
1314330
1314230
1314735
1314830
1319409
1319411
Stock Price $
Code ex GST
S
45.14
S
45.14
S
44.49
S
58.96
S
43.60
S
58.10
1
1
1
1
1
1319413
1319415
1320239
1319432
1319418
Auxiliary contact actuator (Required when fitting auxiliarys to Frame Size 3)
Terminal Covers: Dumeco & Q-Line Switches
Description
Dumeco terminal cover to suit DMM125
Dumeco terminal cover to suit DMV160
Dumeco terminal cover to suit DMV250/400
Dumeco terminal cover to suit DMV630/1000
Q-Line 1 Pole, fully shrouded for M6 Connection bolt
Q-Line 1 Pole, fully shrouded for M8 Connection bolt
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
1
1
3
3
3
Pole,
Pole,
Pole,
Pole,
Pole,
fully shrouded for M10 Connection bolt
fully shrouded for M12 Connection bolt
front terminal protection for Frame Size 0 Switches
S
S
I
S
S
83.97
95.52
POA
23.32
91.04
Switch Covers: Q-Line Switches
Description
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
Pack
Quantity
Fuse Switch front cover, suit QSA40N0/63N0 BS, QSA63N1 BS & QSA100N1 DIN
1
Fuse Switch front cover, suit QSA63N1-QSA125N1 DIN
1
Fuse Switch front cover, suit QSA160N1 DIN
1
Fuse Switch front cover, suit QSA100N1 BS
1
Fuse Switch front cover, suit QSA125N1/160N1 BS
1
Fuse Switch front cover, suit QSA200N-QSA400N BS & DIN
1
Fuse Switch front cover, suit QSA630/800 BS & DIN
1
3 Pole kit, front or rear cover set, suit QA125N1-200N1, QP250N1/400N1
3
3 Pole kit, rear cover set, suit QSA63N1-160N1
3
Part
Number
1320237
1319435
1318476
1319423
1319438
1319429
1319426
1319439
1319439
Q-Line
Q-Line
Q-Line
Q-Line
Q-Line
3 Pole kit, front or rear cover set, suit QA400N & QP400N
3 Pole kit, rear cover set, suit QSA200N-400N
Front cover shroud, QA400N/630N, QP400N/630N
Front cover shroud, QA1000, QP1250/1600
Rear cover kit, suit QSA630/800, QA1000, QP1250/1600
1319441
1319441
1319425
1319424
1319417
3
3
1
1
1
Stock Price $
Code ex GST
S
146.55
S
126.79
I
POA
S
215.24
S
172.53
S
173.71
S
224.64
S
31.21
S
31.21
S
S
S
S
S
44.01
44.01
70.09
242.56
125.92
Loose Busplug Units 3+4 Pole
Description
Plug
Plug
Plug
Plug
Plug
Plug
1-104
assembly
assembly
assembly
assembly
assembly
assembly
Pack
Quantity
3
3
3
4
4
4
Pole
Pole
Pole
Pole
Pole
Pole
125/160A, Plug onto 60mm dropper busbars
1
1
2
2
2
4
x
x
x
x
x
x
3P
3P
3P
2P
2P
2P
Part
Number
Stock
Code
Price $
ex GST
1318268
1319635
1318902
1318269
1319637
1318903
I
I
I
I
I
I
202.23
256.06
563.49
266.97
341.92
751.68
Eaton Holec Q-line Accessories
1
Side Termination Kits: QA & QSA Switches
Description
Pack
Quantity
Part
Number
Stock
Code
Price $
ex GST
160A - Left side line connection, suit QA125N1/160N1 + QSA63N1/160N1
160A - Right side line connection, suit QA125N1/160N1 + QSA63N1/160N1
160A - Left side line & right side load connection, suit
QA125N1/160N1 + QSA63N1/160N1
250A - Left side line connection, suit QSA200N/250N
250A - Right side line connection, suit QSA200N/250N
250A - Left side line & right side load connection, suit QSA200N/250N
400A - Left side line connection, suit QA400N + QSA315N/400N
400A - Right side line connection, suit QA400N + QSA315N/400N
1
1
1319502
1319508
S
S
121.60
121.60
1
1
1
1
1
1
1319504
1319509
1319511
1319510
1319513
1319515
I
S
S
I
I
I
210.60
305.64
305.64
432.00
475.20
475.20
400A - Left side line & right side load connection, suit
QA400N + QSA315N/400N
1
1319514
I
540.00
NB: Above products cannot be used with Plug-In type QSA switches.
Switched Neutral
Solid Neutral
4th Poles and Neutral Links: Q-Line Switches
Description
63 Amp Switched neutral, suit QSA40N0/63N0 + QSA63N1
125 Amp Switched neutral, suit QA125N1 + QSA100N1/125N1
200 Amp Switched neutral, suit QA160N1/200N1 + QSA160N1
200 Amp Switched neutral, suit QSA200N
400 Amp Switched neutral, suit QP250N1/400N1
500 Amp Switched neutral, suit QA400N/630N, QP400N-1000N + QSA250N-400N
630 Amp Switched neutral, suit QA1000, QP1250 + QSA630/800
63 Amp Solid neutral, suit QSA40N0/63N0 + QSA63N1
125 Amp Solid neutral, suit QA125N1 + QSA100N1/125N1
200 Amp Solid neutral, suit QA160N1/200N1 + QSA160N1
200 Amp Solid neutral, suit QSA200N
250 Amp Solid neutral, suit QP250N1/400N1
400 Amp Solid neutral, suit QA400N/630N, QP400N/630N + QSA250N-400N
1000 Amp Solid neutral, suit QA1000 + QSA630/800
1600 Amp Solid neutral, suit QP1250/1600
63A Plug in Switched neutral suit Frame size 1 Fuse switches
160A Plug in Swithed neutral suit Frame size 1 Fuse switches
Pack
Quantity
Part
Number
Stock
Code
Price $
ex GST
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1319462
1319467
1319474
1319476
1319481
1319482
1319662
1319460
1319466
1319472
1319473
1319477
1319480
1319486
1319487
1318475
1318477
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
111.45
119.23
147.63
186.40
154.33
191.70
264.60
62.64
72.90
75.60
85.86
87.48
96.12
253.80
344.52
379.08
407.16
1-105
Eaton Holec Q-line / Dumeco Accessories
1
Handles and Shafts: Q-line & Dumeco Switches
Description
Direct mount knob handle, K1A, Red, for 6mm shaft
Handle, K-Line K2S, Red/yellow, with 6mm coup, IP65 for 6mm shaft
Handle, K-Line K2, Red/yellow, with 8mm coup, IP65 for 8mm shaft
Pack
Quantity
1
1
1
1
1
1
1
1
1
Part
Number
1818002
1818006
1818111
1818010
1818012
1818033
1818036
1818045
1818051
Stock
Code
S
S
S
S
S
S
I
I
I
Price $
ex GST
34.29
56.70
104.00
213.84
265.68
141.31
141.31
186.30
286.20
Handle with Cylinder locking, K2S, Grey, with coup for 6mm shaft
Handle with Cylinder locking, K2, Grey, with coup for 8mm shaft
1
1
1
1
1
1
1
1
1818057
1818063
1818040
1818043
1818070
1818055
1818061
1818067
I
I
I
I
I
I
I
I
311.04
420.12
197.64
197.64
237.60
322.92
376.92
437.40
Padlock ON Conversion kit for K1
Padlock ON Conversion kit for K4-K5-K6
Door Coupling 6mm to suit K2
Door Coupling 12mm to suit K4-K5-K6
Door Coupling 14mm to suit K4-K5-K6
Extension shaft 6x6mm, 300mm long, suit QM & Q-Line
Extension shaft 8x8mm, 300mm long, suit Q-Line
Extension shaft 12x12mm, turn 45 degrees, 115mm long, suit Q-Line
Extension clamp for 6x6mm shafts
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1818103
1818104
1818105
1818106
1059846
1059847
1059664
1059705
1059706
1319831
1319311
1319319
1319326
1319331
1319833
1319332
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
62.64
62.64
62.64
71.28
45.36
45.36
46.44
71.28
122.04
16.74
26.46
29.16
49.35
93.96
23.43
23.43
Extension shaft 6x6mm, 400mm long, suit DMV160
Extension shaft 10x10mm, 400mm long, suit DMV250/400
Extension shaft 14x14mm, 400mm long, suit DMV630/1000
Extension shaft 14x14mm, 400mm long, suit DMV1250/1600/2000
Extension shaft, with clamp, 14x14mm, 200mm long, suit DMS
Shaft transition link, 8x8mm to 12x12mm
K2 retrofit kit to replace old H1 and H2 handles NEW
K3 retrofit kit to replace old H3 handle NEW
1
1
1
1
1
1
1
1
1
1
1
1
1319334
1319336
1314693
1050243
1050247
1050250
1050257
1319397
1319398
1318685
K2ADAPTKIT
K3ADAPTKIT
S
S
S
S
S
S
S
S
S
S
S
S
28.40
29.70
29.16
92.55
96.33
173.88
167.40
20.41
20.41
88.56
138.24
138.24
K4, K5 & K6 retrofit kit to replace old H4, H5 and H6 handles NEW
1
K4ADAPTKIT
S
224.64
1-106
MV Fuse-links
MV Fuse-links
1
Eaton can assist with the supply of a large range of medium
voltage fuses, from world-renowned manufactures such as
Bussmann & SIBA.
MV Fuse-links can be supplied in 3.6, 7.2, 12, 24 & 36kV voltage
ratings, in both BS & DIN configurations and suitable for use
in both Air & Oil type arrangements.
MEMPROOF Isolators 20-63A
MEM Isolators have the following features:• Suitable for isolating all types of circuit
• Available in 2 and 4 pole versions
• Dust and weatherproof to IP56
• Cable capacity up to 25mm2
• Tested to IEC 947.3 240/415Vac
• 4 conduit / cable entries
• High Impact Strength
• Padlocking in the OFF position
• Includes 2 screw earth terminal
Enclosed Isolators
Eaton MEM MP
Current
Rating
Description
20A
35A
20A
35A
45A
63A
AC-23A
KW Rating
Part
Number
Stock
Code
Price $
ex GST
Isolator 20A 2 pole 82 x 165 x 81mm
3kW
5kW
9kW
MP202
MP352
MP203N
S
S
S
68.58
94.93
82.08
15kW
21kW
29kW
MP353N
MP453N
MP633N
S
S
S
101.95
127.44
165.24
1-107
Eaton’s space-saving and easy-to-install XT
line of IEC contactors, overloads, and manual
motor protectors is the efficient and effective
solution for customer applications from
7-2000A. XT meets IEC, UL, CSA, CCC and CE
standards, and is the perfect product solution
for applications all over the world. A global
marketplace reinforces the need for global
ratings, smaller products for smaller panels,
and easier installation and maintenance. XT is
the answer. XT dramatically reduces mounting
and wiring times by allowing standard
components to be combined without using
tools - quickly and error-free. XT makes
installation and maintenance easy with DIN rail
mounting for devices up to 65A, reversing and
star-delta wiring link kits, and modular
combination motor controllers.
XT is perfect for small spaces. DC and AC
contactors are identical in their physical size.
DC coils are controlled by a microprocessor,
which allows for direct switching from PLC
outputs and reduces sealing power
consumption. The XT line obtains Type 2
Coordination in accordance with IEC 60947-4-1.
An increased level of protection is achieved
when the XT contactors are used in
conjunction with XT Manual Motor Protectors,
Series G Motor Circuit Protectors, or fuses up
to 50kA or 100kA depending on the protection
device.
With globally rated contactors, starters,
overload relays, and manual motor protectors
XT defines power control
1300 332 866

LV Power Distribution

Transcription

Similar documents

Cable-in / cable-out miniature circuit breakers and