HUGO BOSS - Nordstrom

Transcription

WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS
WARRANTY AND SERVICE GUIDE
BOSS BLACK
WATCHES WITH SIMPLE FUNCTIONS
2 or 3 hands - Hours – Minutes
3
2 or 3 hands - Hours – Minutes – Date aperture(s)
4
WATCHES WITH MULTIPLE FUNCTIONS
2 or 3 hands & small seconds
5
3 hands – date counter
6
Multi-eye – Day - Date - 24-hour counter
7
Multi-eye – Day of the week – Date & moon phase
8
WATCHES WITH CHRONOGRAPH FUNCTION
Simple Chronograph
9
1/10 seconds Aviator Chronograph
10
1/5 seconds Chronograph
11
COMPLEX WATCHES WITH CHRONOGRAPH FUNCTION
Regatta Chronograph
Racing Chronograph
Worldtimer Chronograph
AUTOMATIC WATCHES 12
13 - 15
16
17 - 18
BOSS Orange
DIGITAL WATCHES
Models with digital display
20
Digital Chronograph Models
21
Models with analog and digital display
22
ANALOG WATCHES
Models with two or three hands
23
Models with multi-eye
24
2 or 3 hands - Hours – Minutes
Positions of the crown:
Position 1 - Normal position.
Crown pushed against the case.
Position 2 - Setting the TIME:
Rotate the crown in either direction.
3
2 or 3 hands - Hours – Minutes – Date aperture(s)
Date
Position 2 - Setting the DAY*:
Rotate the crown clockwise.
NOTE: For models with DAY OF THE WEEK/DAY display(s): Rotate the crown clockwise to set the DAY and counterclockwise to set the
DAY OF THE WEEK.
*WARNING: Never set the day of the week when the hands
are between 9:00 pm and 3:00 am to avoid damage to the
calendar mechanism.
NOTE: Setting the date does not affect the working of the
watch. When the watch is working, the date changes gradually
during the period between 9:00 pm and 3:00 am.
4
2 or 3 hands & small seconds
Direct-drive seconds
5
3 hands – date counter
Date hand
Position 2 - Setting the DATE counter:
6
Multi-eye – Day – Date – 24-hour counter
Day-of-the-week
hand
Date hand
24-hour hand
Setting the hour, minutes and 24 hours:
Setting the day of the week:
1. Pull the crown out to position 3.
2. Rotate the crown clockwise to place the hour, minute and
24-hour hands at the desired time.
2. Rotate the crown clockwise: the day-of-the-week hand
moves forward one day each time the hour and minute hands
pass the 4:00 am (04:00) position.
3. Push the crown back to position 1.
3. Once the desired day is obtained, push the crown back to
position 1.
Setting the second time zone:
1. With the crown in position 1, press and release the pushbutton B to place the 24-hour hand to the desired position;
the hand moves forward one hour with each press.
Setting the month:
1. With the crown in position 1, press then release push-button
A to set the month; the month hand moves forward one
month at each press.
Setting the day:
CAUTION: To avoid damage to the watch mechanism, do not
use the quick month correction function on the 31st of the
month as automatic month changes take place on this day.
2. Rotate the crown clockwise: The day hand moves forward
one figure each time the hour and minute hands pass the
midnight position (00:00).
3. Once the desired day is obtained, push the crown back to
position 1.
Quick date correction:
2. Rotate the crown clockwise to move the day
forward step by step.
3. Once the desired day is obtained, push the crown
back to position 1.
WARNING: To avoid damage to the watch mechanism, do not
use the quick day correction function between 9:00 pm (21:00)
and 12:30 am (00:30) as the automatic date changes take place
during this interval.
7
Multi-eye – Day of the week – Date & moon phase
Day-of-the-week hand
Date hand
Direct-drive
seconds
Moon phase
Setting the day
NOTE:
Pull the crown out to 2nd position to stop the seconds hand
on 0 (12 hours).
Make sure you have correctly set the AM/PM status before
setting the time.
Rotate the hours/minutes hands clockwise to set a day.
When the day changes, the watch moves to AM status
(ante meridiem).
To set the day, you need to rotate the hour hand forward
24 hours per day.
(The day changes during the period between 0:00 am and
5:30 am or a bit later).
NOTE:
Setting the moon phase
If you set the day by rotating the crown counterclockwise,
the date may not change.
Pull the crown to the 1st position.
Rotate the crown clockwise to move the moon phase forward.
Do not set the day by rotating the crown counterclockwise.
The day changes during the period between 0:00 am
and 5:30 am or a bit later.
Setting the time
Having set the day, set the hour and minute hands.
Rotate the hour/minute hands clockwise to set the time.
To ensure correct setting of the time, first rotate the minute
hand 5 minutes ahead of the desired time, then go back
(by rotating counterclockwise) to the desired time.
Having set the time, use a time signal to synchronize the watch
by pushing in the crown to its normal position to start the
direct-drive seconds hand.
8
Simple Chronograph
A: Start/Stop
Chronograph
minute hand
24-hour hand
B: intermediate time /
Reset to zero
Chronograph
seconds hand
Clocking total time of a series of events of short duration
(for example, the exact playing time of a soccer game which
is frequently interrupted):
1. Push button A to start the chronograph at the beginning
of the match.
Rotate the crown counterclockwise.
2. Push button A to stop the timing when the match is
interrupted.
3. Press button A again when play resumes.
*NOTE: If the date setting is performed between 9:00 pm
and 3:00 am, it is possible that the date will not be changed
the following day.
4. Repeat steps 2 and 3 until the end of the match.
5. Press button B to reset the chronograph to zero.
Using the chronograph:
Synchronizing the chronograph hands:
The chronograph function of this model lets you time an event
lasting up to 59 minutes / 59 seconds in one second increments.
Use the buttons A and B to use the chronograph.
After a battery change or in case of error, it may be necessary
to adjust the seconds hand of the chronograph to align it
correctly to the zero position:
IMPORTANT: The crown must be in position 1, and the
hands of the chronograph must be at 60 (zero) before starting
chronograph. Do not use the chronograph if the crown is in
position 2 or 3. If necessary press button B to set the hands of
the chronograph to zero before using it.
2. Press button A to adjust the chronograph seconds hand:
Each press of button A will move the chronograph hand
forward one second. Press button A without releasing
the pressure to move the hand forward fast.
Simple chronograph functions:
3. Once the hand is properly aligned, push the crown back
to position 1.
Measuring a single event without interruptions:
1. Press button A to start the chronograph.
2. Press button A a second time to stop the chronograph.
9
1/10 seconds Aviator Chronograph
A: Start/Stop
Minute hands of
the chronograph
1/10th of seconds hands
B: Intermediate time /
Reset to zero
Chronograph seconds hands
OVERVIEW
Setting the date:
This precision quartz-movement chronograph has a
minute counter (up to 30”), a counter of tenths of
seconds (after 30 minutes it counts the hours),
a small subdial for seconds, a central seconds hand,
an advanced calendar function with display apertures
for the day and month, and a central hand indicating the
date. It can be used to measure an event lasting up to
30 minutes to the tenth of a second, or events lasting
up to 10 hours to the nearest second.
1. Pull the crown to position 2.
2. Rotate the crown in either direction to move the
hands and set the time making sure that the date
changes at midnight and not at noon. (To set the
time to the precise second, see “Setting the time”).
SETTING THE TIME
Setting the time:
1. Pull the crown to position 3 as soon as the small
seconds hand reaches the 60 seconds position.
The watch stops.
2. Rotate the crown in either direction to move the
hands and set the time, making sure that the date
changes at midnight and not at noon.
3. Place the hands slightly ahead of the exact time,
then rotate the crown slowly counterclockwise
to align the minute hand with the correct
minute marker.
4. Use an accurate and reliable time signal (from a radio
station for example). When the exact time is given,
push the crown back to position 1, against the case.
The watch restarts at the exact time.
10
1/5-second Chronograph
Intermediate time functions:
A: Start/Stop
Clocking split times during a race:
Chronograph
minute hand
24-hour hand
2. Press button B to temporarily stop the chronograph.
3. Read the intermediate time.
Chronograph
hand
(1/5-second
precision)
4. Press button B to restart the chronograph.
The hands go back to catch up with the ongoing event.
B:Intermediate time/
Reset to zero
5. To read a second intermediate time, press button B again.
Small seconds hand
Repeat steps 2 to 4 to measure further intermediate times.
6. Press button A to stop the chronograph.
Setting the day and time:
7. Final time display.
NOTE: The chronograph’s 1/5-seconds hand will stop after
10 minutes while the internal mechanism continues
the calculation.
Synchronization of the chronograph hands:
After a battery change or in case of error, it may be necessary
to adjust the 1/5-second, seconds, minute and hour hands to
correctly align their respective positions to zero.
*NOTE: If the day setting is performed between 9:00 pm and
3:00 am, it is possible that the date will not be changed the
following day.
NOTE: It is important to follow the steps in the prescribed order:
Using the chronograph:
2. Press button B and keep it down for 2 seconds, then release.
This watch offers a chronograph function to measure an event
lasting up to 20 minutes to the fifth of a second. Use the
buttons A and B for the chronograph.
3. Rotate the crown to move the chronograph minute hand to
zero position.
4. Press button B again and keep it down for 2 seconds,
then release.
IMPORTANT: The crown must be in position 1 and the hands
of the chronograph must be at 60 (zero) before starting the
chronograph. Do not use the chronograph if the crown is in
position 2 or 3. If necessary, Press button B to reset the hands
of the chronograph to zero before using it.
5. Rotate the crown to bring the seconds hand to zero.
6. Press button B a third time and keep it down for 2 seconds,
then release.
7. Rotate the crown to bring the minute and hour hands to zero.
8. If necessary, Press button B and keep it down for 2 seconds,
then release to prepare the mechanism to adjust the seconds
hand of the chronograph.
2. Press button A a second time to stop the chronograph.
9. When the chronograph hand setting is finished,
push the crown back to position 1.
11
Watches with COMPLEX chronograph functions
Regatta Chronograph
Alarm hand
Hour and second
counter
Display:
• Second
countdown
• Clocking the hours
Seconds hand
M
1
MIN
.
15
12
6
0
2
4
8
WATER RESISTANT
5
10 ATM
5
25
8
H
50
24
0
20
30
3
10
1
3
IM
10
40
20
18
IN
T
Pusher A
• START/STOP
R
50
8
M
G
60
6
45
IN
05
60
35
.
6
Central hand
To display:
• Minute
countdown
• Clocking
minutes
HT
S0
40
Pusher C
• Alarm ON/OFF
YA C
I2
5
R
OU
UTE
E
5
IN
MIN
7
.
Minute hand
Warning: timing starts with a countdown, then continues
with chronograph timing.
12
Pusher B
• Reset to zero
• Setting the
countdown
• Second chance
countdown
adjustment
• Change the hours/
seconds display on
the subdial at
10 o’clock
WATCHES WITH COMPLEX CHRONOGRAPH FUNCTIONS
Racing Chronograph
CHRONOGRAPH
Minute hand
Minute hand
60
5
55
60
50
45
MIN
15
24-hour hand
10
Aiguille des
heures
Hour
hand
30
24
18
SEC
Crown
N: Normal
1: One “click” out
2: Two “clicks” out
12
30
Aiguille
de
Small
seconds
la petite seconde
hand
6
15
45
60
40
ALARM
3
9
20
12
6
35
CHRONOGRAPH
seconde
1/5-seconds de
hand
25
Date
Date
30
ALARM
Aiguille des
heures
Hour
hand
ALARM
Minute hand
How to set the time and date:
1
2
60
60
5
55
5
55
60
60
50
30
30
60
6
12
30
24
18
SEC
12
30
12
12
9
20
3
40
40
ALARM
ALARM
3
9
6
6
25
30
6
15
18
SEC
45
24
15
45
60
35
MIN
15
20
50
45
10
MIN
15
10
45
35
Tirer
Pull
out to 1st position
25
30
s Pull the crown out one click.
s Rotate the crown clockwise until the previous
day’s date is displayed.
Note: do not set the date between 9 pm and 1 am to avoid
upsetting the change.
3
60
5
55
60
50
MIN
15
10
45
30
24
18
SEC
6
15
45
60
12
30
40
ALARM
3
9
20
12
6
35
25
30
7LUHU
Pull
out to 2nd position
HQ
s Pull the crown out one more click when the
seconds hand is at 12 o’clock.
Note: when the chronograph is running or has stopped, the hands
will be automatically reset to zero if the crown is two clicks out.
13
Racing Chronograph
How to set the alarm function:
1
2
60
60
5
55
5
55
60
45
50
30
15
30
60
60
24
45
SEC
6
24
18
SEC
12
30
6
15
18
15
45
MIN
12
30
12
12
9
20
3
40
40
ALARM
ALARM
6
3
9
20
50
15
10
MIN
10
45
60
6
35
25
35
Tirer
Pull
out to 1st position
30
25
30
Press button B several times to set the Alarm
function hands to the desired time.
Pull the crown out one click.
3
Note: if button B is kept down, the Alarm function hands move fast.
Then press button A to activate the alarm.
60
5
55
60
50
MIN
15
10
45
30
24
18
SEC
6
15
45
60
12
30
40
ALARM
3
9
20
12
6
35
25
Pousser
Push
back to normal
position
30
Replace the crown in normal position.
Note: the alarm function is automatically activated.
How to cancel the alarm you have set:
1
2
60
60
5
55
5
55
60
50
45
45
15
6
12
30
6
12
30
12
12
20
9
40
40
3
ALARM
6
3
9
6
25
30
24
18
SEC
15
18
SEC
ALARM
15
60
24
35
MIN
30
60
20
50
45
30
10
MIN
15
10
45
60
35
Tirer
Pull
out to 1st position
25
30
Pull the crown out one click.
Press button B and keep it down until the Alarm
function hands stops on the current time.
3
Note: if button B is kept down, the alarm function hands move fast.
60
5
55
60
50
MIN
15
10
45
30
24
18
SEC
6
15
45
60
12
30
40
ALARM
3
9
20
12
6
35
25
30
Pousser
Push
back to normal
en position normale
position
Replace the crown in normal position.
Note: the alarm function is automatically activated.
14
MODE D’EMPLOI
Racing Chronograph
Montre Boss Black Racing
Comment
utiliser
les fonctions
How to use the
Chronograph
functions: du chronomètre :
The Chronograph can measure up to 59’ 59” 80 in 1/5 second increments.
,E
CHRONOMáTRE PEUT MESURER JUSQUÜ MIN S EN UNIT£S DE áME DE SECONDE
After 60 minutes, it resumes counting from zero to 12 hours.
!PRáS
MINUTES IL REPRENDRA LE D£COMPTE Ü Z£RO JUSQUÜ HEURES
After 12 hours the Chronograph stops automatically.
!U BOUT DE HEURES LE CHRONOMáTRE SARRäTE AUTOMATIQUEMENT
MODE D’EMPLOI
MODE D’EMPLOI
Montre Boss
Boss Black
Black Racing
Racing
Montre
CHRONOGRAPH
CHRONOMÈTRE
Minutes
dial
B
eil
er
50 5500
60
60
45
15
45 MIN 15
MIN
30
30
45455
Aiguille de
de
Aiguille
la petite
petite seconde
seconde
la
18
18
18
30
4400 40
12
12
24
24
24
66
6
12
12
12
3
99
9
ALARM
ALARM3
6
ALARM
6
3355
35
CHRONOMÈTRE
CHRONOMÈTRE
ème
de seconde
seconde
Aiguille 1/5
1/5ème
de
Aiguille
RÉVEIL
RÉVEIL
Aiguille des
des heures
heures
Aiguille
Couronne
Couronne
N:
Normal
N: Normal
1 :: Position
Position
du premier
premier déclic
déclic
SPLIT-TIME
COUNTER
RATTRAPANTE
1
du
2 :: DE
Position
du second
second déclic
déclic
LIBÉRATION
LASPLIT-TIME
RATTRAPANTE
RELEASING
THE
COUNTER
2
Position
du
515
115
60
60
SEC
SEC
SEC
30
Aiguille des
des minutes
minutes
Aiguille
START
DÉMARRER
ARRÊTER
STOP
REDÉMARRER
Aiguille 24
24 heures
heures
RESTART
Aiguille
55
5
1100 10
Aiguille des
des heures
heures
Aiguille
2255
25
3300
30
RÉINITIALISATION
Date
REINITIALIZING
Date
HAND
RÉVEIL
RÉVEIL
Aiguille des
des minutes
minutes
Aiguille
CHRONOMÈTRE
CHRONOGRAPH
Comment
régler l’heure
l’heure et
et la
la date
date ::
Aiguille Comment
1/5
de seconde
régler
Comment
régler
l’heure
et
la
date
:
1/5-seconds
hand
Comment
Comment
régler
régler
l’heure
l’heure
et
la date
date
et la
la:: date
date ::
Comment
réglerComment
l’heure
et larégler
date
: l’heure
1
2
Comment
régler
l’heure
et
la
et
ème
1
2
6
3
ALARM
ALARM
6
25
30
25
35
25
30
9
50
50
3
6
25
30
25
9
20
3
6
ALARM
9
20
50
45 45
45 45
50
50
Tirer
Tirer
Tirer
Tirer
Tirer
couronne jusqu’au premier déclic
en 1ère position
en 1èrelaposition
Tirer
couronne jusqu’au premier déclic
en 1ère position
en 1èrelaposition
12
ALARM
35
35
9
20
50
20
50
50
45 45
20
20
50
45 45
20
20
50
50
50
45 45
45 45
20
20
20
35
35
3
24
18 24 6
18 12 6
12
12
15 15
9
25
25
24
18 24 6
18 12 6
12
12
12
10
30
30
40
ALARM
40
ALARM
35
25
SEC
9
15 15
60
24
18 24 6 60
SEC
18 12 6 30
30
30
40
30
30
MIN
60
SEC
SEC
30
10
60
60
SEC
SEC
12
12
Tirer 30
12 3
Tirer
6 3
en 1ère position
6
en 1ère position
30
5
60
MIN
60
5
60
MIN
MIN
5
60
45 60 15
45 30 15
5
60
45 60 15
45 30 15
10
9
9
55
55
40
9
25
25
60
MIN
MIN
15 15
3
3
6
30
5
5
60
45 60 15
45 30 15
10
6
30
3
6
ALARM
60
10
6
ALARM
12
ALARM
35
35
55
40
35
35
9
55
55
60
55
24
18 24 6
18 12 6
12
12
60
2
2
40
25
25
3
40
ALARM
6
30
40
40
40
9
24
18 24 6
18 12 6
12
12
12
30
30
30
15 15
3
ALARM
30
MIN
60
SEC
SEC
10
40
6
ALARM
35
35
9
10
3
15 15
12
12
MIN
MIN
MIN
60
5
60
10
30
45 60 15
45 30 15
5
60
45 60 15
45 30 15
60
24
18 24 6 60
SEC
18 12 6 30
SEC
12
30
30
60
SEC
30
55
55
10
60
MIN
2
2
5
5
15 15
60
MIN
SEC
5
5
60
45 60 15
45 30 15
60
10
55
55
60
60
55
10
60
55
20
60
1
1
10
1
1
40
30
Faire tourner la couronne dans le sens horaire
Faire tourner la couronne dans le sens horaire
jusqu’à ce que la date de la veille s’affiche.
jusqu’à
ce
que
lala date
de la veille s’affiche.
Remarque
: ne
pas
régler
date
entre 21 h et 1 h sous peine de perturber
Tirer la couronne
Tirer la couronne
jusqu’au premier
jusqu’audéclic
premier déclic
Faire tourner
Fairela tourner
couronne
la couronne
dans
le sens
dans
horaire
le sens
horaire
Remarque
: le
ne
pas
régler
la date
entre 21 h et 1 h sous peine de perturber
Tirer la couronne
Tirer la couronne
jusqu’au premier
jusqu’audéclic
premier déclic
Faire tourner
Fairela tourner
couronne
la couronne
dans
le sens
dans
horaire
le sens
horaire
changement.
jusqu’à cejusqu’à
que la ce
date
que
delaladate
veilledes’affiche.
veille s’affiche.
lelachangement.
jusqu’à ce
jusqu’à
que lala ce
date
que
delala
ladate
veille
des’affiche.
lahveille
s’affiche.
Remarque : neRemarque
pas régler: ne
date
pas régler
entre 21
date
h et 1entre
h sous
21 peine
et 1 de
h sous
perturber
peine de perturber
30
30
30
30
Remarque : le
neRemarque
pas régler: le
ne
la changement.
date
pas régler
entre 21
la date
h et 1entre
h sous
21 peine
h et 1 de
h sous
perturber
peine de perturber
changement.
le changement.
le changement.
3
3
60
55
6
6
30
50
3
6
25
30
25
9
20
6
ALARM
9
20
45 45
7LUHU
3
9
7LUHU
3
9
HQQGHSRVLWLRQ
HQQGHSRVLWLRQ
7LUHU
7LUHU
7LUHU
7LUHU
Tirer
la
couronne
jusqu’au
deuxième déclic
QGH
QGH
HQ SRVLWLRQ
HQ SRVLWLRQ
Tirer
couronne jusqu’au deuxième déclic
HQQGHSRVLWLRQ
HQQGHlaSRVLWLRQ
lorsque
l’aiguille des secondes est à 12 heures.
ALARM
ALARM
30
35
35
30
20
50
50
45 45
20
20
50
50
30
12
12
3
15 15
35
35
24
18 24 6
18 12 6
12
12
ALARM
40
9
25
25
24
18 24 6
18 12 6
12
15 15
3
40
40
6
6
30
12
30
30
40
40
12
ALARM
30
MIN
60
SEC
SEC
30
10
24
18 24 6 60
SEC
18 12 6 30
SEC
12
30
3
9
10
12
ALARM
35
35
MIN
MIN
15 15
30
30
45 30 15
5
60
MIN
60
5
60
45 60 15
10
30
60
5
60
55
60
SEC
SEC
55
5
60
MIN
10
45 45
5
60
45 60 15
45 30 15
MIN
60
5
60
45 60 15
45 30 15
10
55
55
60
50
55
60
20
3
3
10
3
3
40
e
6600
60
5555
55
20 2200
e
cé
n Réveil
CHRONOGRAPH
Minute hand
CHRONOMÈTRE
Cadran des minutes Aiguille des minutes
CHRONOMÈTRE
CHRONOMÈTRE
Aiguille des
des minutes
minutes
Aiguille
25
25
lorsque
l’aiguille
des
secondes
est à 12 heures.
Remarque
: lorsque
le chronomètre
est en marche ou a été arrêté,
Tirer la couronne
Tirer la couronne
jusqu’au deuxième
jusqu’au
deuxième
déclic
déclic
Remarque
le chronomètre
est en marche
ou a déclic,
été arrêté,
Tirer la couronne
Tirer la couronne
jusqu’au deuxième
jusqu’au: silorsque
deuxième
déclic
déclic
la
couronne
est
sur la position
du second
lorsque l’aiguille
lorsquedes
l’aiguille
secondes
des secondes
estles
à la
12
heures.
est
àest
12
si
couronne
surheures.
la position du
second
déclic,
aiguilles
seront
automatiquement
remises
à zéro.
lorsqueRemarque
l’aiguille
lorsque
des
l’aiguille
secondes
des secondes
estou
à aaiguilles
12
heures.
est
à 12
heures. remises
lesen
seront
à zéro.
Remarque : lorsque
le chronomètre
: lorsque le est
chronomètre
en marcheest
été
marche
arrêté,
ou aautomatiquement
été arrêté,
Remarque : si
lorsque
Remarque
le chronomètre
: si
lorsque
le position
est
chronomètre
en marche
est
ouen
a déclic,
été
marche
arrêté,
ou a déclic,
été arrêté,
la couronne
est
la couronne
sur la
est
sur
dula
second
position
du
second
si la
couronne
siest
la
couronne
sur la position
estautomatiquement
sur
du
la
second
position
déclic,
du
second
déclic,
les
aiguilles
seront
les
aiguilles
automatiquement
seront
remises
à zéro.
remises
à zéro.
les aiguilles seront
les aiguilles
automatiquement
seront automatiquement
remises à zéro.remises à zéro.
25
25
15
27
Watches with COMPLEX chronograph functions
Worldtimer chronograph
A: Start/Stop
Worldtimer ring
adjustment crown
24 hours
Chronograph
minute hand
2nd time-zone
B: Intermediate time /
Reset to zero
Chronograph
seconds hand
Small direct drive
seconds hand
Synchronizing the chronograph hands:
Position 1 -Normal position.
Position 2 -Setting the DAY*:
Setting ONLY the HOUR:
Turn the crown in either direction.
Position 3 -To set the hour for both the local time and
in a second time zone, turn the crown in
either direction. The hour hand for the local
time and the hour hand for the second time
zone are connected to set the time for both.
After a battery change or in case of error, it may be
necessary to adjust the seconds hand of the chronograph
to align it correctly to the zero position:
2. Press button A to adjust the chronograph seconds
hand: Each press of button A will move the
chronograph hand forward one second.
Press button A and keep it pressed to make the
hand advance fast.
3. Once the hand is properly aligned, push the crown
back to position 1.
*NOTE: If the date setting is performed between
9:00 pm and 3:00 am, it is possible that the date
will not be changed the following day.
GMT functions:
- The red hand indicates a second time zone.
To set the second time-zone, pull the crown to
position 2 and rotate counterclockwise.
Then push the crown back to position 1.
Worldtimer functions:
2. Press button A a second time to stop
the chronograph.
- The crown at 10 o’clock rotates a graduated ring set in
the watch dial. It is not necessary to pull the crown to
rotate this ring.
Clocking total time of a series of events of short
duration (for example, the exact playing time of
a soccer game which is frequently interrupted):
1)Push button A to start the chronograph at the beginning of the game.
2)Push button A to stop the chronograph when the game is interrupted.
3)Press button A when play resumes.
4)Repeat steps 2 and 3 until the end of the game.
5)Press button B to reset the chronograph to zero.
- The user can instantly calculate the time in the
24 cities printed on the flange.
Simply align the figure “0” with your current city.
Then add the number corresponding to each city
to the local time to know the time instantly.
So in the diagram below, it is 10:10 am in London.
It is therefore 10:10 + 2 hours = 12:10 pm in Cairo
10:10 + 4 hours = 14:10 (2:10 pm) in Dubai
10:10 – 6 hours = 4:10 am in Chicago
16
Automatic watches
Rotate the crown clockwise to manually wind up the movement.
17
AUTOMATIC WATCHES
Large date
corrector
Moon phase
corrector
Rotate the crown clockwise to manually wind up the movement.
The correction of the moon phase is accomplished with small touches on the
corrector at 10 o’clock with the crown
pulled out.
The correction of the date phase is accomplished with small touches
on the corrector at 4 o’clock with
the crown pulled out.
18
WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS
WARRANTY AND SERVICE GUIDE
Digital Watches
Models with simple digital display
B - MODE
A - SET
Time setting
Press key A twice to set the time, select the
chosen display: month / day / hours / minutes.
The display flashes. Press B to set your choice.
Press A to confirm.
20
Digital Watches
Digital Chronograph Models
Lighting /
Re-initialization
(pusher A)
(pusher D) Start/
stop
Mode (pusher B)
(pusher C)
Setting
Setting the time
3. Timer
1. Real time
Setting the timer:
Press A to turn on lighting whatever the mode selected.
1.Press C to select the timer:
Setting the time:
2.Press A to start/stop the timer.
1.Press C to set the time.
3.Press B to set the hour, minutes and seconds.
2.Press B to select the hour, minutes, year,
month and day.
4.Press D to set the flashing and C to return to
Timer mode.
3.Press D to set the flashing unit and C to return to
Real Time mode.
5. Functioning of the timer:
Press D to start/stop the timer:
press C to reset to zero when the timer stops.
4. Setting the double time-zone: with the time setting
function selected, press A to choose the 12 or
24 hour format.
6. A 10 second alert is triggered at this
precise moment.
2. Setting the Alarm function
4. Chronograph
1.Press C to select alarm setting. This causes the hour
display to flash and sets the alarm to auto start.
1.Press D to start/stop the Chronograph:
2. Once the Chronograph stops,
press A to reset it to zero.
2.Press B to select the hour, minutes, year,
month and day.
3. When the Chronograph is running, it is possible to
press B to return to Real Time mode.
3.Press D to set the flashing and C to return to
Alarm mode.
4. With the Alarm function selected, press A to stop
) or the chime (
).
or start the alarm (
5. When the alarm time is displayed, an alert sounds
) flashes for around 20 seconds.
and an indicator (
21
Digital Watches
MODE D’EMPLOI
Models with analog and digital display
Modèles à affichage analogique et digital
Lighting /
Éclairage / réinitialisation
re-initialization
(poussoir A)
(poussoir
(pusher D) D)
Start / stop / arrêt
Démarrage
(pusher A)
ModeMode
(poussoir
B)
(pusher B)
Pusher B
PoussoirB
–>
Real time
Tempsréel
(poussoir
C) Réglage
(pusher C) Setting
Pusher B
PoussoirB
–>
Chronograph
Chronographe
Pusher B
PoussoirB
–>
Alarm
Réveil
Setting the time
Réglage
de l’heure
Setting the time
Réglagedel’heure
4. Setting the time
1. Press A to turn on lighting for 3 seconds
1.
at Appuyer
any time. sur A pour mettre en marche l’éclai-
The seconds flash during loading.Press D to return to
DémarrageetarrêtdelafonctionRépétition
zero. Press C to select the elements, in the following
order: Hour –> Minute –> Month –> Day –> Day of
Lorsquelasonnerieduréveilretentit,appuyersur
the week –> Second.
unpoussoirousurDpourarrêterlasonnerieet
appuyersurBpourdémarrerouarrêterlafonction
When
setting the time, “H” is displayed for 24 hour
format, and “A”
or “P” for est
12 hour
format.laIf sonnerie
you
Répétition.
Lorsqu’elle
activée,
press
D
while
the
number
of
seconds
displayed
retentira après cinq minutes, et s’arrêteraisautobetween 30 and 59, seconds are reset to zero and
matiquementauboutde20secondes.
rage
pendant 3 s à tout moment.
2. Chronograph
Press D to start/stop the Chronograph.Once the
2.
Chronographe
Chronograph
stops, press C to reset it to zero.
AppuyersurDpourdémarrer/arrêterlechronomètre.
When it is running, press C to display an intermediate
time.
The indicator “SP” appears.Then, press D
Unefoislechronomètrearrêté,appuyersurCpourle
to
leave Intermediate Time mode and stop the timing.
remettreàzéro.
Press C again to reset to zero.
the time is set to the next minute. If the number of
seconds is between 00 and 29, the minutes stay
4. Réglage
the
same. de l’heure
Lorsqu’ilestenmarche,appuyersurCpourafficher
When
the Chronograph is ’indicateur«SP»apparaît.
running, it is possible to
untempsintermédiaire.L
press
B
to
return
to
Real
Time
mode.
Ensuite,appuyersurDpourquitterlemodeTemps
3.
Daily alarm
intermédiaireetarrêterlechronométrage.Appuyerà
nouveausurCpourremettreàzéro.
Start and stop of the alarm and the chimePress D
) or the chime (
).
to stop or start the alarm (
Lorsquelechronomètreestenmarche,ilestpossible
Setting
the
alarm
function:
press
C
to
select
the
hour
d’appuyersurBpourreveniraumodeTempsréel.
Les secondes clignotent pendant le chargement.
Appuyer sur D pour revenir à zéro. Appuyer sur C
poursélectionnerleséléments,dansl’ordresuivant:
Heure–>Minute–>Mois–>Jour–>Jourdela
semaine–>Seconde.
Lorsduréglagedel’heure,«H»s’affichepourle
format24h,et«A»ou«P»pourleformat12h.
SivousappuyezsurDalorsquelenombredesecondesaffichésesitueentre30et59,cedernier
estremisàzéroetl’heureestrégléesurlaminute
suivante.Silenombredesecondessesitueentre
00et29,lesminutesrestentinchangées.
and minutes and D to set the flashing unit.
Press C to confirm and B to return to Real Time mode.
3. Réveil journalier
Starting and stopping the Repeater function.
Démarrageetarrêtduréveiletdelasonnerie
When the alarm chime sounds, press a pusher or
AppuyersurDpourarrêteroudémarrerleréveil
on
D to stop the chime and press B to start or stop
(the Repeater
)oulasonnerie(
).
function. When it is activated, the
chime will sound after five minutes, and will stop
RéglagedelafonctionRéveil:appuyersurCpour
automatically
after 20 seconds.
sélectionnerl’heureetlesminutesetsurDpour
réglerleclignotement.AppuyersurCpourconfirmeretsurBpourreveniraumodeTempsréel.
22
36
Analog Watches
Models with two or three hands
Seconds hand
Date display
Setting the time
Pull the crown to position 3. To set the time,
rotate the crown in either direction.
Setting the date
Pull the crown to position 2. To set the date,
23
Analog Watches
Multi-eye models
Day display
Date display
24-hours display
Watches with multiple subdials are activated by
multi-function movements which display information
such as the month, the day of the week and the day
in apertures (or windows) placed on the dial.
Setting the time and name of the day
Pull the crown to position 3. To set the time, rotate
the crown in either direction. To set the name of the
day the crown should be rotated until the hour hand
has completed 2 rotations to move to the following
or previous day.
Setting the date
Pull the crown to position 2. To set the date,
24

HUGO BOSS - Nordstrom

Transcription

Similar documents

nabucco self-winding cHRonogRaPH

chronograph - Audemars Piguet

CHRONOFIGHTER FORTRESS GRAHAM flight plan

N22CHR / N22 Alex - Christopher Ward

Instructions for use Mode d`emploi ROYAL OAK OFFSHORE

Nabucco Cuore Caldo

Muscle Man / Gotham English 2013 Watch

Instructions for use Mode d`emploi ROYAL OAK