Q1 2015 - Sykes Pickavant

Transcription

JANUARY - MARCH 2015
Specialist Tool Solutions
NEW PRODUCTS
& SPECIAL OFFERS
INCLUDES BATTERY CARE, BRAKING, COOLING, ENGINE TIMING,
LAND ROVER TOOLS, SUSPENSION, WORKSHOP TOOLS & MORE!
www.sykes-pickavant.com
08269000
NEW
AVAILABLE
FEBRUARY
Ford Transit Lower Arm Bush Tool
• For the removal and replacement of the large rear bush on
the lower arms of Ford Transits from 2000 – 2013
• Designed to be used with a 187000V2 press frame and ram
• On vehicle solution with minimal strip down
• Can also be used in a workshop press for lower arms when they
have been removed from the vehicle
• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013
• OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131
€127.95
08756000
Ford Transit Bearing Press Kit
Successful removal of troublesome inner bearing
race and reinstallation of complete bearing assembly
• For the removal and installation of the front wheel bearing on
Ford Transits 2000-2013 with the aid of a workshop press
• Removes and installs bearings on both 5 and 6 stud hubs
• Removes the inner and outer bearing race
€256.95
MADE IN THE UK
082545V2
UPDATED KIT
Ford Transit Hub & Front Wheel Bearing Remover Kit
SUSPENSION
Scan the QR code
to watch an
overview video of
the Ford Transit
Bearing Press Kit
Updated slide hammer kit now includes larger hub plate and extra-long pillars
to enable removal of hubs and front wheel bearings on six stud Transits
• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal
• Features a heavy duty slide hammer which operates in two directions to achieve
multiple operations in one tool
• Provides three different solutions in one kit:
- Can be used as a traditional hub puller
- Remove the stubborn inner bearing race
- Use the slide hammer in the reverse direction to remove the outer bearing race
3 IN 1 TOOL
€490.00
Outer Bearing
Race Removal
Hub Removal
Inner Bearing
Race Removal
08255500
08255000
Ford Transit Press
Upgrade Kit
Ford Transit Hub & Front Wheel
Bearing Remover - Upgrade Kit
• Set of tools to enable the original Transit
Bearing Kit (08254500) and the 082545V2 kit (above) to be used in a workshop press
• Suitable for use on Ford Transits ‘00-’13
• Removes and installs bearings on both
5 and 6 stud hubs
• Removes the inner & outer bearing race
€128.95
1
KEY
FOR USE WITH UNIVERSAL PRESS
FRAME (18700100)
See page 10
• Includes larger hub plate and extra-long pillars
enabling owners of the original Transit Bearing Kit (08254500) to remove hubs and front wheel bearings on six stud Transits
€99.50
FOR USE WITH PRESS FRAME
PRESSURE SCREW (18704100)
See page 9
FOR USE WITH SP 12T HYDRAULIC
RAM (18000000)
See page 10
Mercedes Sprinter Ball Joint Tool
Adaptor Set
AVAILABLE
FEBRUARY
• For the removal and installation of ball joints on
Mercedes Sprinter ‘95 -’06 and revised ‘06
onwards models (901, 902, 903, 904 and 906)
• Adaptor set can be used with either Universal
Press Frame & Ram (187000V2 - see page 9) or
a workshop press
• Enables work to be carried
out on the vehicle
• Applications:
- Sprinter ‘95 onwards
- VW LT ‘96 - ‘06
- VW Crafter & Sprinter ‘06 onwards
€205.00
NEW
187413V2
Mercedes Sprinter Ball Joint Tool including
Press Frame & 12 Tonne Hydraulic Ram
• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901,
902, 903, 904 and 906)
• Includes 187304V2 Adaptor Set (left) and Press Frame
with 12 Tonne Hydraulic Ram
• Adaptor set can be used in a workshop press
Tel: 01543 679900
187403V2
€514.95
08070000
Ball Joint Separator – HGV applications
3-Size Ball Joint Separator
• Ideal for use on vehicles: Audi / VW (A3, A4 and
A6 with double wishbone), BMW & Mercedes-Benz
• Drop forged rugged, flat design with three
interchangeable forks - 24, 27 and 31mm
• Forks are attached to the centre screw to allow
continuous adjustment within the jaw capacity range
• Features an internally operated drive spindle (M24)
and an elongated recess in the forks, providing a safe
& secure operation
• Jaw capacity range: 30 - 65mm
NEW
• Strong, heavy duty body, with strengthened fork and lever,
allows for greater force to be applied
• Can be upgraded to hydraulic power
• Jaw Opening: 70mm
Jaw Throat Width: 36mm OFFER €149.50
SAVE €31.00
Jaw Throat Depth: 50mm
LIST PRICE €180.50
180700V2
12 Tonne Hydraulic Ball Joint Separator
Updated kit now uses power from the SP
12 tonne hydraulic ram
• Hydraulic version of the 08070000 HGV Ball Joint Separator (left)
• Specification:
- Jaw Opening: 70mm - Jaw Throat Width: 36mm
- Jaw Throat Depth: 50mm
€205.00
OFFER €283.50
SAVE €90.50
Ford Transit Ball Joint Tool
• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013
• On vehicle solution provides time saving benefits
• Tool designed to access the awkward location of the ball joint
• Manual option includes screw converter allowing the user to
utilise an existing SP hydraulic ram
• Hydraulic option includes 12 Tonne SP hydraulic ram
Part No.
Description
Price
08256000
Manual Option
€222.50
18256000
Hydraulic Option
€321.00
*Note - Hydraulic ram included in 18256000 only
KEY
FOR USE WITH
WORKSHOP PRESS
See page 15
UPDATED KIT
SUSPENSION
08065000
FOR USE WITH
AIR TOOLS
See page 4
ON VEHICLE
SOLUTION
Scan the QR code to watch
a video of the Ford Transit
Ball Joint Tool - Hydraulic
Version
2
BEARING REMOVAL / INSTALLATION
Ford 82mm Bearing
3
Part No.
Size
08129500
72mm
78mm
82mm
08128000
78mm
82mm
08129000
62mm
66mm
72mm
85mm
Scan the QR code
to watch a video of
the 72mm GEN2
Bearing Tool
VW Group Bearing
Applications
Price
Essential Kit
72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster,
VW Polo (Front), VW Fox with PAS (Front)
78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2,
Volvo S80, V70, XC60, XC70
€772.95
Ford / Volvo / Land Rover / Mazda Combined Kit
€445.00
VW Group Kit
62mm - Audi A2, VW Lupo (Front)
66mm - Skoda Fabia, VW Fox (Front), Polo
85mm - VW Multivan, Touareg, Transporter (Front / Rear)
€832.00
All Sizes Master Kit
62mm - Audi A2, VW Lupo (Front)
66mm - Skoda Fabia, VW Fox (Front), Polo
85mm - VW Multivan, Touareg, Transporter (Front / Rear)
081220V2
62mm
66mm
72mm
78mm
82mm
85mm
08123500
62mm
Audi A2, VW Lupo (Front)
€225.95
08124500
66mm
Skoda Fabia, VW Fox (Front), Polo
€225.95
08125500
72mm
Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster,
€256.95
08126500
78mm
Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
€277.50
08128500
82mm
Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2,
€290.50
08127500
85mm
VW Multivan, Touareg, Transporter (Front / Rear)
€321.00
€1090.00
NEW LOWER PRICES!
• The GEN 2 type of wheel bearing is predominantly fitted to models from
Ford, Land Rover, Mazda, VW Group and Volvo
• Includes a variety of different diameter tool kits covering a range of
sizes to suit the different GEN2 bearings used by vehicle
manufacturers
• Designed to distribute pressing force evenly through the
outer bearing race and also allows for the suspension leg
to remain in-situ on the vehicle when fitting new bearings
Note: Spare Parts are available for all kits. Please see our website / catalogue
Tel: 01543 679900
NEW! ‘Bionigrip’ Air Die Grinders NEW
• Provides perfect handling due to the ‘Bionigrip’ surface
• Low noise level & minimal vibration provides less “kick back” from cutters
• Includes stepless trigger and air exhaust to the rear
Specification
Weight
Length
Precision Collet Maximum RPM
90211000
0.5kg
175mm
6mm
90212000
0.82kg
177mm
6.35mm
Air Inlet
Hose min.
Air Consumption
23,000
1/4” NPT
10mm
116 l/min
23,000
1/4” NPT
10mm
116 l/min
90211000
90212000
‘Bionigrip’ Heavy Duty
Straight Air Die Grinder
‘Bionigrip’ Heavy Duty
90° Air Die Grinder
€103.00
€128.95
•
90213000
90220000
Micro Die Grinder
Universal Air Swivel
Joint Inlet
• 2 x 360° rotation
• Industrial quality
• Heat treated connecting screw
€128.95
€19.50
High Quality Air Tools that set the standard for Torque!
• Smart design impact wrench with ergonomically designed handle
• Single-switch can be changed for easy forward or reverse operation
• Easily adjustable torque regulator • Can be configured for right and left handed use
• Composite body
• High visibility green body to help reduce trip hazard
Impact Wrench Specifications:
Part No.
90201000
Drive
Max Torque Torque Nm
Nm (Reverse)
(Fwd)
Noise
(dBA)
Air Consumption Weight
(l / min)
(kg)
1/2”
1600
1084
94.2
135
1.8
90201500 (Mini) 1/2”
680
500
93.5
130
1.08
90202000
3/4”
2600
2000
97
210
3.2
90202500
3/8”
680
500
93.5
130
1.08
90203500
1/4”
90
90
98.2
105
0.9
90204500
1”
3100
2200
110
305
6.8
53399000
Retractable Hose Reel - 20m x 10mm
• Spring driven retractable hose reel c/w wall
mounting brackets
• Suitable for compressed air or
OFFER €257.95
cold water up to 20 bar working
SAVE €97.00
pressure
• UV stabilised polypropylene
• Includes 20 metre x 10mm heavy
duty black rubber air / water
hose to ISO EN 2398 standard
• 3/8” bsp female inlet and the
hose terminates in a 3/8” bspt
male
Hoses also available in 20m x 8mm (3/8”
fittings) and 18m x 12mm (1/2” fittings).
Contact Customer Services for more information
Price
AIR TOOLS
• Mini composite device for small / fine grinding and milling
• Provides perfect handling due to the ‘Bionigrip’ surface
• Minimal vibration and low noise
• Exhaust air through hose to the rear
• Length: 137mm
€239.00
€218.00
€643.95
€218.00
€179.50
€1095.00
90210000
Signal Hose - 10mm (3/8”)
• Length: 10 metres
• High-visibilty hose to reduce trip hazard
• Abrasion resistant outer cover
• Working temp range -40°c to +65°c
• Working pressure: 300psi
• Break pressure: 1000psi
N.B. Hose supplied without fittings
€39.50
90201100
Rubber Boot - For 90201000
• For use with 90201000 - 1/2” Impact Wrench
(see above)
• Protects gun from accidental damage
*Impact wrench not included
€21.95
4
08550300
GM Gearbox Bearing / Race Remover
• For the removal of taper bearing cups from clutch housings
in M32, MT 20-6 and MT 32-6 manual gearboxes widely used
in GM, Saab and Fiat Group
• Specifically designed to spread the load equally without
danger of cracking the gearbox casing
€90.00
SAVE €26.00
Scan the QR code to watch a
video of the GM Gearbox
Bearing / Race Remover
07759700
NEW
Universal Timing Gear Holder
• Manufactured from high strength fibre reinforced nylon polymer
• Single lever design enables quick and easy use
• Provides breaker bar strength for maximum holding force
OFFER €45.00
• Allows adjustment of cam
SAVE €10.50
gear once installation is
LIST PRICE €55.50
complete
ENGINE SERVICE
STAR BUY
081100SP
Dual Mass Flywheel – Special Tool
• Developed in conjunction with LUK, to allow accurate testing
of the Dual Mass Flywheels (DMF)
unit, whilst it is still mounted on
the vehicle, with the gear box
removed
• Includes all the components
required to test the DMF
including the LUK specific DMF
data, instructional CD and
Data Wheel which are vital to
the correct operation of the kit
• The Data Wheel provides specific
data, per application, to allow the
technician to correctly evaluate the DMF
€446.50
66095100
Vehicle Fluid Change Syringe - 1.5L
• Transparent design to easily view the fluid
• Suitable for fluid suction and supply in vehicle service
• Ideal for applications such as engine / gear oil & differential fluid
• 1.5L capacity with rotative switch off
OFFER €53.50
SAVE €11.00
LIST PRICE €64.50
07754600
Universal Timing Gear Holder Kit
• Timing belt service kit
• Includes Universal Timing Gear Holder (left) and 4 x cam clamp pieces
OFFER €64.50
SAVE €38.50
03810000
Adjustable Oil Filter Remover - 3 leg
• Spider-type wrench, c/w geared legs which
automatically tighten as the force is applied
• Range: 62 to 93mm diameter
• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr.
and / or 19mm hex
OFFER €25.50
SAVE €5.45
LIST PRICE €30.95
03860000
Strap Type Oil Filter Remover - For
all filters up to 300mm diameter
• Multi-purpose strap wrench, ideal
for all oil filters up to 300mm
circumference
• Range: 20 to 300mm diameter
• Strap Length: 1 metre long &
40mm wide
• Strong steel shank and polyester strap
• Self tightening band designed
for fast and secure filter
removal
• Double ended 13/16” hex
c/w 3/8” & 1/2” sq. dr
OFFER €34.50
SAVE €10.50
LIST PRICE €45.00
5
NEW
Diesel Injector Seat Cleaner Set
• Cleans injector seats and chambers when changing or
reconditioning diesel injectors
• Helps to avoid blow-back due to poorly seated injectors
• Now includes:
- Removal tool for copper washers
- Wire brush cleaning set for chamber walls
- Injector blanking plugs to avoid debris entering the cylinders
- Centralising stem to improve correct cleaning seating angle
FREE
Hydraulic Injector Puller Systems
Updated kits now include a set of solenoid sockets (01513500) and
2 x tamperproof sockets
• For the removal of stubborn injectors
• Provides controlled force to aid the removal of seized injectors
where there is insufficient access for traditional slide hammers
• Uses a multi-position frame, with adjustable legs of different lengths
and a selection of mounting adaptors to allow alignment of the tool
with the injectors on a wide variety of modern diesel engines
• Supplied with injector adaptors for most modern injector types:
M14 | M16 | M17 | M20 | M25 | M27
M9R Renault
Kit (18582500)
WHEN YOU
PURCHASE
185800V2SP
OR 185810V2SP
Mechanical Hydraulic
Injector Puller Kit
€1547.95
• As per 185800V2SP kit (left) but includes a
mechanical hydraulic ram
• Allows use of the kit ithout the need for a separate hydraulic pump
€1289.95
01745000
Universal Injector Seat Cleaner Set
• Designed to clean the injector holes after
extraction work
• Kit includes:
- 20mm & 25mm metal
brushes for injector
hole cleaning
- 1 x seal plug to close
the injector hole while
cleaning
- 2 x front brushes for
injector seat cleaning
OFFER €64.50
- 1 x front brush extension
SAVE €38.50
- 1 x sanding kit
- 1 x seal plug holder to
place & remove the plug
OFFER €316.00
SAVE €64.50
08585000
DIESEL INJECTOR REMOVAL
WORTH €122.50
185810V2SP
• 10 tonnes Hydraulic Hollow Cylinder
provides the force – use with standard
hydraulic pump
(not supplied)
€225.50
SAVE €57.00
Applications:
PSA Adaptor Plate Renault / Nissan /
GM – Dci 2 litre
(18583000)
engines (M9R)
A bespoke add on
kit for use on PSA
2.0 & 2.2 litre HDi
diesel engines
185800V2SP
Hydraulic Injector Puller Kit
STAR BUY
Tel: 01543 679900
017500V2
Heavy Duty Slide Hammer Injector Remover Kit
• For removal of Bosch, Delphi, Denso and Siemens injectors
• Features a flexible u-joint adaptor for access in restricted areas
• Contains 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0,
M20 x 1.0, M25 x 1.0, M27 x 1.0
- 4 x Injector Solenoid removers: M25, M27, M29, M30
- 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex
- 7mm Tamperproof: 10mm hex
• Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg)
08551000
1.3 Common Rail Twin Injector Puller Attachment
• Enables the two injectors to be removed at the same time as shared
injector clamp hinders removal of injectors individually
• Suitable for use with 08585000 Kit & 185800V2SP Hydraulic Injector
Puller Kit above
• Commonly found on 1.3 engines:
Alfa: Mito, Fiat: 500 / C, Doblo, Cargo, Fiorino, Grande Punto, Idea, Linea,
Panda, Punto Evo, Qubo, Strada, Ford: Ka, Lancia: Musa, Ypsilon, Opel: Agila,
Astra H, Corsa D, Meriva, Vauxhall: Astra MK V, Corsa MK III and Meriva
Scan the QR code to
watch a video of the
1.3 Common Rail
Twin Injector Puller
Attachment
OFFER €96.50
SAVE €19.50
6
COMPRESSION & PRESSURE TESTING
UPDATED KIT
314660V2
Common Rail Diesel (CRD) High Pressure Test Kit
Updated kit now includes unique pressure limiting valve in-built
to prevent extreme pressures building in test kit during engine cranking
OFFER €495.00
SAVE €20.95
314200V2
• Measures delivery pressure output from the CRD (Common Rail Diesel) high
pressure pump under engine cranking conditions
• Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar Tell-tale needle shows maximum pressure achieved during cranking test
• High pressure test gauge allows direct connection to the high pressure pump,
providing cranking pressure measurement of the pump
• M12 x 1.5 & M14 x 1.5 connections
• Includes shaped high pressure connector pipes (x5) to connect and cover many
applications and supplied in a plastic case
Diesel Engine Compression Test Kit Standard Car Kit
• For both direct and indirect diesel injected engines
• Checks engine compression under cranking conditions
• Enables cylinder access through dummy injector
and glow plug adaptors
• Built-in pressure relief valve enables repeat
tests without dismantling
• Supplied in plastic case with foam insert
• 560mm Rubber Hose
• Gauge Scale:
0-60bar, 0-860psi
• Gauge Diameter: 83mm
OFFER €277.50
SAVE €41.00
31405000
Petrol Engine Compression Tester
• Specially designed for deep seated spark plug ports with long narrow threads
• Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports)
• Specially designed self-centering adaptors
ensure minimal risk of cross threading
when attempting to screw the compression
adaptor into the spark plug port
• Supplied in plastic case
with foam
insert
OFFER €195.00
• Gauge Scale:
SAVE €31.95
0 - 20bar, 0 - 190psi
31427500
SAVE €32.00
Diesel Engine
Compression Test Kit Common Rail Diesel (CRD)
• Covers a wide range of modern CRD
diesel injected engines
• Checks engine compression under
cranking conditions
• Enables cylinder access through
dummy injector and glow plug
adaptors
• Built-in pressure relief valve enables
repeat tests without dismantling
• Supplied in plastic case with foam insert
31470000
Oil Pressure Test Kit
• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators
• Shock protected dual scale gauge, for
quick & accurate oil pressure checks
• Permanently oil primed, 1m long
flexible hose, enables access to
difficult to reach oil switch ports
• Small profile, quick coupling
adaptors with built-in shut-off
valve
• 10 x oil switch port adaptors
OFFER €219.00
• Supplied in plastic case with
SAVE €17.00
foam insert
• Gauge Scale: 0 - 10bar,
0 - 150psi
31462000
Common Rail Diesel (CRD) Fuel Return Flow Kit
7
OFFER €483.95
• Designed for use on the injector return side of a CRD system
• Helps to diagnose: poor / no engine starting, poor engine running,
poor acceleration / general lack of engine power
• Fuel resistant, highly flexible rubber hoses
• Suitable for solenoid injectors only
• Supplied in plastic case and includes graduated acrylic measuring
block for up to six cylinders, injector adaptor sets for Bosch /
Delphi / Denso / Siemens, set of reduction pipes for small
diameter flow back ports and under bonnet hanging hook
Scan the QR code
to watch a video
of the CRD Fuel
Return Flow Kit
OFFER €218.00
SAVE €39.95
NEW 110V MODEL
Tel: 01543 679900
SP 110V Induction Heater +
with SP Coil Kit (96015000)
New 110 Volt version designed with site work in mind,
where only 110 Volt power is permitted
• Provides safe and near instant heat for site work, construction
and factory maintenance users, providing a small, fast and
flexible tool in place of open flame options when heating components
• Time saving tool ideal for use in all environments and makes
the completion of on-site risk assessments far easier
• Includes features as per SP Induction Heater + (below)
• Specifically designed for the UK/EU: 110v/6 amp/1000 watt
with full CE certification
• Includes rope, u-form & pre-formed coil
Shown for illustrative
purposes only
STAR BUY
SAVE €64.50
960200SP
960211SP
SP Induction Heater + with SP Coil Kit (96015000)
The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II®.
Uses new engineering technology for increased energy efficiency and ease of use.
Now you can use the power of technology with a flameless heat to quickly release corroded or
seized components and other metallic parts. All without the damage normally associated with
gas torches. Heats in seconds!
Key features of the SP Induction Heater +
• Specifically designed for the UK/EU: 230v/6 amp/1000 watt – with full CE certification
• Operates cooler for better efficiency, handling and product longevity
• Carry Case; with storage for all attachments, fits in tool chests for security
• Long operating cycle time • A true 1,000 watts max output power available
• LED work light illuminates work area
• Integrated CE filter improves handling of product
• 1 year warranty - Parts/Labour
• Includes rope, u-form & pre-formed coil
INCLUDES SP 110V INDUCTION
HEATER + & SP COIL KIT
OR
960200SP
INCLUDES SP INDUCTION
HEATER + & SP COIL KIT
96015000
SP Coil Kit
OFFER €832.00
SAVE €64.50
960260SP
96015000
SP Rope Coil Set - x3
SP Coil Kit
• Contains 8 x popular sizes of interchangeable coils
• Supplied in protective case
€128.95
WORKSHOP TOOLS
960211SP
• Set of three highly adaptable
coils allows user to shape
to suit
• Use three / four windings
of coil for maximum
performance
OFFER €96.50
SAVE €19.50
90206000
96025000
‘Vibro-Impact’ Air Hammer
SP Heat Pad
• Removal of decals, graphics, stripes,
emblems & body mouldings etc
• Softens the adhesive to make removal
simple & effective
€87.50
Scan the QR code to watch
a video of the Vibro Impact
Air Hammer and SP Induction
Heater +, that when used
together, create a powerful
solution for suspension bolts
that are rusted in tight on a
vehicle
• A unique concept to aid the removal of seized suspension parts
• The ‘Vibro-Impact’ system allows for the controlled application of force via an
air powered impact hammer
• Allows the operator to control &
gradually increase the force being applied,
in order to loosen seized components
• High visibility green handle to help reduce
trip hazard
• Features a built-in shock-absorber in
order to minimise risk of damage if too
much pressure is accidentally applied
• Low vibration for user comfort
• Supplied with a handy wall mounted storage
Scan the QR code to
bracket and a set of four impact hammers
watch
a video of the
for variable
‘Vibro-Impact’
OFFER
€355.00
applications
Air Hammer
SAVE €77.00
8
Land Rover Swivel Ball Joint Kit
• A new “on vehicle” solution for the removal
and replacement of twin swivel ball joints as fitted onto
the front axles of two popular
Land Rover models: Discovery 2 ‘98 – ‘04
Range Rover P38A ‘94 – ‘02
• Uses the Sykes-Pickavant 187 Hydraulic Series press frame
to deliver 12 tonnes of force, for a “take the press to the
vehicle” solution (Inc in 18771100 only)
• Designed, tested and manufactured in Great Britain
Available Options
Part No.
Description
List Price
Save
Offer Price
18771000
Adaptor Set only
€257.95
-
€257.95
18771100
Adaptor Set plus Press Frame,
Adaptor Ring & Ram
€644.95
€71.00
€573.95
Scan the following QR codes to watch videos of the kit in action
Overview
Removal of front
axle swivel ball
joint
Insertion of front
axle swivel ball
joint
Land Rover Bush Kit
LAND ROVER
Sykes-Pickavant have developed a solution for the efficient removal and refitting of
bushes on traditional Land Rover models
MADE IN THE UK
Scan the following QR codes to watch
videos of the kit in action
Insertion
Removal
Available Options
Part No.
18775000
18775500*
• For radius arm, panhard bushes & general suspension bushes
• Dedicated shaped press pieces for correct location / alignment
• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover,
Range Rover P38A & older Series Land Rovers
Description
Contents
Price
Includes 6 Adaptor Pieces for use in a workshop press
with suspension parts removed from vehicle (Can be used
Adaptor Set only
with a press frame or C Clamp - N.B. Requires 18775100
step plate)
Kit includes 6 Piece Adaptor Set, 18775100 step plate,
Bush Kit Press Frame Option
press frame, adaptor ring & 12 Tonne SP hydraulic ram
€180.50
€554.50
*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp
18775100
187000V2
Universal Press Frame c/w
12 tonne Hydraulic Ram
Multi-application Step Plate
• Updated unit now provides greater power
• Open frame design - 200mm of clearance
through the press frame
• Includes adaptor ring (18780400) for use
with 08780000 and related press piece sets
• Ideal for use with individual model
specific press piece sets
OFFER €316.00
SAVE €69.50
9
KEY
FRAME (18700100)
See page 10
• New single piece stepped press frame plate
• Allows for many different sized press pieces
to fit positively into the frame for precise work
€38.50
18704100
Press Frame Pressure Screw
• To be used in press frame instead of ram for faster operation where greater travel is required to
remove / install bushes
• The screw has a fine thread and
roller bearing for ease of use
€122.50
See page 9
RAM (18000000)
See page 10
Land Rover Discovery 3 & 4 Suspension Bush
Master Kit
NEW
A comprehensive solution specifically designed for removal of seized / corroded bushes and
installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models
• Available kits are as follows:
- Master Kit
- Front lower
- Front upper
- Rear lower
- Rear upper
• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
• Lower arm bushes can be replaced on vehicle without having
to remove the wheel
• Individual press frame pieces for each wishbone
• To be used in conjunction with the SP Universal
Press Frame (18700100) and due to the nature
of corroded components, the power of the
SP 12 Tonne Hydraulic Ram is also required
(18000000) (Can be purchased together as
187000V2 - Universal Press Frame c/w 12 Tonne
Hydraulic Ram)
• The SP 90206000 Vibro Impact Air Hammer and
SP 96020000 Induction Heater can be used to assist
in the removal of corroded suspension bolts and
Scan the QR code to watch a
bushes - See QR code
video of the 90206000 Vibro
Other available options
Part No.
Description
Price
18777100
Land Rover Discovery 3 & 4
Front Lower Kit
€334.00
18777200
Front Upper Kit
€218.00
18777300
Rear Lower Kit
€256.50
18777400
Rear Upper Kit
€218.00
03125000
Land Rover Viscous Fan Tool Set
€837.00
LAND ROVER
Impact Air Hammer & 96020000
SP Induction Heater removing the
suspension bush bolts
MADE IN THE UK
Tel: 01543 679900
18777000
€77.50
NEW
• Use both tools together to replace the cooling fan on
Land Rover Discovery 3, Range Rover 3 and Range Rover
Sport models (V6 engines only)
• Extra long, thin design for easier working in confined spaces
• Length: 650mm
18700100
18000000
Universal Press Frame
SP 12 Tonne Hydraulic Ram
• Includes adaptor ring (18780400)
for use with 08780000 and related
press piece sets
• Can also be used with SP 8 or 12
Tonne hydraulic ram and press
frame pressure screw
• Can be used with 18700100 Universal Press Frame - see left
• Features Hex Drive, to allow for greater input with use
of ratchet spanner or socket
OFFER €118.00
SAVE €23.95
OFFER €195.00
SAVE €61.50
KEY
FOR USE WITH
WORKSHOP PRESS
See page 15
FOR USE WITH
AIR TOOLS
See page 4
10
SUSPENSION
“TAKE THE PART
TO THE PRESS”
5343 SERIES
Hydraulic Press Range - 15T, 20T, 30T, 50T
18777000
187403V2
18775000
Mercedes Sprinter
Ball Joint Tool
Adaptor Set
Land Rover
Bush Press Kit
Suspension Bush Master Kit
18777100
Front Lower Kit
18777200
Front Upper Kit
18777300
SUSPENSION
AVAILABLE
FEBRUARY
Rear Lower Kit
18777400
Rear Upper Kit
187502V3
AVAILABLE
FEBRUARY
Opel Movano / Renault
Master / Nissan
Interstar - UPPER
Ball Joint Adaptor Set
187503V3
Master / Nissan
Interstar - LOWER
08756000
Ford Transit Bearing
Press Kit
08255000
Ford Transit Press
Upgrade Kit
53451500
53453000
Press Piece Sets
53451000
15-20T
Press Plate
08269000
Ford Transit Lower
Arm Bush Tool
53451200
Accessories
Box
08770000
Universal Press
Support Block
AVAILABLE
FEBRUARY
08785500
XS Sleeve Kit Basic
11
08786500
XS Sleeve Kit Master
08780000
Car / LCV
Sleeve Kit
08790000
SUV / LCV
Sleeve Kit
08797500
Commercial
Sleeve Kit
08795000
Upgrade Kit From 08790000
to 08797500
Tel: 01543 679900
N SOLUTIONS
“TAKE THE PRESS
TO THE VEHICLE”
187000V2
Universal Press Frame c/w 12 tonne Hydraulic Ram
18771000
18777000
18775000
Suspension Bush Master Kit
Land Rover
Bush Press Kit
Land Rover Swivel Ball
Joint Adaptor Set
18777100
Front Lower Kit
18777200
Front Upper Kit
18777300
18777400
Rear Upper Kit
187502V3
AVAILABLE
FEBRUARY
187503V3
Master / Nissan
Interstar - LOWER
Master / Nissan
Interstar - UPPER
187403V2
Mercedes Sprinter
Ball Joint Tool
Adaptor Set
18704100
Press Frame
Pressure Screw
18732500
Fiesta & Focus
Bush Kit
AVAILABLE
FEBRUARY
08269000
Ford Transit Lower
Arm Bush Tool
SUSPENSION
Rear Lower Kit
18775100
18780400
Adaptor Ring Multi-application
Step Plate
18732100
Fiesta Bush
Adaptor Set
18732200
Focus Bush
Adaptor Set
08785500
XS Sleeve Kit Basic
08786500
XS Sleeve Kit Master
08780000
Car / LCV
Sleeve Kit
08790000
SUV / LCV
Sleeve Kit
08797500
Commercial
Sleeve Kit
08795000
Upgrade Kit From 08790000
to 08797500
12
ALREADY HAVE ONE OF THESE??....
08780000
Universal Press & Pull Sleeve Kit - Car / LCV Kit
€488.95
• Contains 20x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 34 - 72mm
• Outside Diameter Range: 44 - 82mm
• 4x Step Plates / 4x Pulling Spindles with thrust bearings
• Supplied in moulded storage case
....THEN THE NEW XS SLEEVE KIT IS A GREAT ADDITION!
€321.00
08785500
XS Sleeve Kit - Basic
NEW
• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) to increase applications for smaller bushes
• Contains 10 x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm
• Includes extension spindle with thrust bearing, lock nuts and grease
• Supplied in moulded storage case
PURCHASE 08780000 UNIVERSAL PRESS & PULL SLEEVE KIT &
08785500 XS SLEEVE KIT (ABOVE) FOR A SPECIAL OFFER PRICE
COMBINED OFFER
087800SP Universal Press & Pull Sleeve Kit c/w XS Sleeve Kit - Basic
SUSPENSION
+
= €745.50
SAVE €64.50
08786500
08790000
Universal Press & Pull Sleeve Kit - SUV / LCV
• For use as an add-on to the Standard Press & Pull
Sleeve Kit (08780000 - above)
OFFER €870.95
• Allows access to a wider range of vehicles SAVE €193.55
e.g. SUV’s & LCV’s
• 2 x 20mm Pulling Spindle Adaptors
with Thrust Bearings M20
• 8 x Press Sleeves in 2mm
diameter steps
• 4 x Step Plate Discs
• Inside Dia. Range: 82 - 88mm
& 98 - 104mm
• Outside Dia Range: 92 - 98mm
& 108 - 114mm
XS Sleeve Kit - Master
• Stand alone kit for smaller bush applications
• Contains 10 x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 14 - 32mm
• Outside Diameter Range: 24 - 42mm
• Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease
• Supplied in moulded
storage case
€419.50
08797500
Scan the QR code to watch an
overview video of Suspension
Removal & Installation Tools
Universal Press & Pull Sleeve OFFER €1483.50
SAVE €316.00
Kit - Commercial Vehicle
• Complete kit for SUV, LCV, PSV, HGV
• Contains 20x Press Sleeves in 2mm
diameter steps
• Inside Diameter Range:
74 - 112mm in 2mm steps
• Outside Diameter Range:
84 - 122mm in 2mm steps
• 4x Step Plate Discs / 4x Pulling
Spindles with nuts & thrust
bearings M10 / M12 / M14 / M16
• 2 x 20mm Heavy Duty Pulling
Spindles (M20 long & M20 short)
with thrust bearings
13
KEY
FRAME (18700100)
See page 10
NEW
08795000
Upgrade Kit - From 08790000 to
08797500
• For owners of kit 08790000 (SUV / LCV - above) who wish to upgrade to the full contents of the combined
LCV / HGV Kit
(08797500 - left)
OFFER €612.95
SAVE €141.55
See page 9
RAM (18000000)
See page 10
Fiesta & Focus Master Bush Kit including
Press Frame & Pressure Screw
• Kit includes adaptor set for the removal and installation
of trailing arm bushes, 18700100 Press Frame and
18704100 Pressure Screw
18732100 - Fiesta Adaptors
• Bush OEM Reference Numbers:
Fiesta - 1011363, 1016439, 96FB5K653CA
Focus - 1 061 670, 1304124
Fiesta Applications:
- Fiesta ‘95-’02 - KA ‘96-’08
- Puma ‘96-’02
18732200 - Focus Adaptors
Focus Applications:
- C-MAX ‘07- MPV
- MKI ‘98-’04 Estate, Hatchback, Saloon, Van
Adaptor Sets
- MKII ‘04- Convertible, Hatchback, Saloon, Van
Adaptors in the following kits can be used in a press frame with either a
18704100 pressure screw (recommended) or a hydraulic ram
Also works with the following applications:
- Kuga ‘08- Off Road
Part No.
Description
Price
- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback
18732100*
Adaptor Set for Fiesta Trailing Arm Bushes
€128.95
- Mazda 5 (CR/CW) ‘05- MPV
- Volvo C30 ‘06- Hatchback
18732200*
Adaptor Set for Focus Trailing Arm Bushes
€128.95
- Volvo C70 II ‘07- Cabrio
- Volvo S40 II ‘04-’12 Saloon
- Volvo V50 ‘04-’12 Estate
18780400
MADE IN THE UK
€514.50
Tel: 01543 679900
18732000
• Ring sits in press frame for use with 08780000 Universal
Press & Pull Sleeve Kit and related press
piece sets to hold adaptors in place
AVAILABLE
FEBRUARY
€25.50
UPDATED KIT
187512V3
Opel Movano / Renault Master / Nissan
Interstar Ball Joint Tool Kit
• For the removal and installation of upper and lower ball joints
as fitted to the following:
- Nissan Interstar ‘02 onwards
- Opel Movano ‘98 onwards
- Renault Master II ‘98 onwards
• Enables work to be carried out on the vehicle
€514.50
SUSPENSION
Adaptor Ring
Adaptor Sets
Adaptors in the following kits can be used in a press frame with a
hydraulic ram
Part No.
Description
Price
187502V3
Adaptor Set for UPPER Ball Joint
187503V3
Adaptor Set for LOWER Ball Joint
€127.50
€127.50
NEW LOWER
PRICES!
087304V2
Ford & Volvo Rear Bush Tool Kit
NEW LOWER PRICE!
Updated kit now also capable of installing &
removing the longer bush as fitted onto the nearside
of newer model Volvo cars
• Individual press piece kit for dismantling and installing
the rear wishbone / trailing arm bush
• Correctly aligns & sets bush depth in trailing arm upon
installation, so not to tear bush
• Suitable for:
Ford: Mondeo & Mondeo Estate ‘07-, S-Max & Galaxy ‘06Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10For a full applications list, please visit our website - www.sykes-pickavant.com
KEY
FOR USE WITH
WORKSHOP PRESS
See page 15
FOR USE WITH
AIR TOOLS
See page 4
Suitable for both standard and
new longer bushes
OFFER €359.95
ON CAR SOLUTION
SAVE €149.55
14
NEW Silver Series range of Hydraulic Workshop Presses equipped with
a two-speed manual pump, overload safety valve, automatic arm
back-run system and V blocks
• Welded, heavy duty steel frame
• Overload safety valve
• Pressure gauge
• Winch for table (For models 53436400 & 53436500)
• Piston over-travel limit stop
• Two speed pump
• Automatic arm return
• V blocks
• Manufactured in the EU
Rating
Height
(mm)
Width
(mm)
Depth
(mm)
Bed Depth
(mm)
Range
(mm)
Weight
(kg)
Price
53436000*
15T
1930
920
650
170
85 - 950
150
€708.00
53436200*
20T
2030
940
650
180
65 - 1030
165
€863.00
53436400*
30T
2060
1120
650
200
115 - 1020
230
€1275.95
53436500
50T
2290
1220
650
210
70 - 1065
370
€1998.00
Part No.
NEW
*Recommended for use with Universal Press Support Block - 08770000 - See page 17
53451000
NEW
15-20T Press Plate
€64.50
WORKSHOP EQUIPMENT
• Heavy duty plate sits on press bed with
hole to push components through
NEW
53451500
15-20T Press Piece Set
OFFER €115.50
SAVE €21.00
• Includes one adaptor & three
press pieces
• Sizes: 10, 18 and 24mm diameter
30-50T Press Piece Set
€12.95
SAVE €21.00
• Adjustable cradle for gearboxes
up to 300kg
• Twin adjustable screws allow for
various gearbox orientations
• Four adjustable side plates to fit and
support gearboxes
• Includes two collars to fit popular
transmission jacks
• Remove and extract waste fluids or oil
from an engine with flexible PV tube
and robust probe
• Powered from compressed air
• 70L tank capacity
• Adjustable 10L oil capture pan
• Visible fill level indicator
• 1 - 2 L/Min Suction capacity depending on nozzle used
• Working pressure 8-10 Bar
• Emptying with compressed air 1-2 bar
• Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes
WARNING: Do not
use with corrosive
or inflammable
products
FOR USE WITH UNIVERSAL
PRESS FRAME (18700100)
See page 10
NEW
Gearbox Cradle
OFFER €127.50
Pneumatic Oil Extractor
15
• Galvanised accessory box
useful for storing press piece
sets etc
• Includes hanging hook
38450000
53390000
KEY
Accessories Box
NEW
53453000
• Includes one adaptor
& six press pieces
• Sizes: 5, 10, 14, 18, 24
and 29mm diameter
NEW
53451200
NEW
€347.00
See page 9
€230.95
38400000
Transmission Jack
Features include:
• Pedal pump
• Chrome plated extension rod
• “Dead man” controls
• Maximum height: 1970mm
• Maximum weight: 300kg
€256.50
FOR USE WITH SP 12T
HYDRAULIC RAM (18000000)
See page 10
FOR USE WITH
WORKSHOP PRESS
See page 15
FOR USE WITH
AIR TOOLS
See page 4
Elwis “Compress Flex”
COB LED Hand Lamp
• Adjustable light through 180°
• Hanging Hook
• 3W COB LED
• 200 Lumen
• Magnetic base
• IP54 Dust Protection
• Includes 230v AC adaptor &
12v car charger
Elwis “Compress Mini”
COB LED Hand Lamp
• Adjustable light through 180°
• 1.5W COB LED
• 120 Lumen
• Includes belt clip,
2 x fixed magnets and
230v / USB chargers
€52.95
60080-1
Elwis Pen Light
• LED flash light with belt clip
• Handy Magnet
• Battery included
€37.50
Back
Tel: 01543 679900
14026
14025
€11.95
Front
14020
• Latest LED technology: Chip On
Board (COB)
• Extremely powerful wide beam light
• On/Off push button switch
• Belt clip
• Powerful magnet on back of lamp
• Durable, shatterproof rubberised
ABS housing and polycarbonate lens
• 5 hours charging time
• Provides continuous
light for 3.5 hours
per charge
€47.95
Elwis H120A Headlight Torch with Zoom –
Remote Battery Pack
• Aluminium and ABS plastic construction
• 3W Cree LED
• Adjustable beam up to 80° and lighting
distance up to 150m
• Adjustable inclination up to 90°
• Optical lens maximises light output
• The LED will never need replacing
• 2 light settings: 100% and 50%
• Rugged adjustable headband
• Foam padding for added comfort
• Battery compartment located at
rear of headlamp
• Batteries included
€29.95
WORKSHOP TOOLS
Elwis “Compress” COB
LED Hand Lamp
60120
03950000
Valve Spring Compressor - Multivalve Engines
• For the removal of valves on multivalve petrol &
diesel engines
• Reinforced frame made from rust-proofed steel
• Supplied with 23mm & 28mm valve spring adaptors
OFFER €69.50
SAVE €14.45
LIST PRICE €83.95
30044000
Dual Laser Infra-Red Thermometer
• High precision non-contact thermometer
• Dual Laser beams are targeted on
a single spot – ensures
optimum distance from
object for accurate
temperature measurement
• Temperature range:
-50° to 550°C
• Accuracy: +/- 1.5% at 550°C
• Features:
- Backlit LCD display
- MAX temperature display
OFFER €89.95
- Automatic data hold & display
SAVE €13.55
resolution
- High & Low temp alarm setting
• Ideal for Aircon, Cylinder / Brake temp,
Cooling System, Exhaust Cat etc
66088700
9 PC. Hook, Pick & Scraper Set
• Hardened chrome vanadium steel
• Ergonomic soft grip handles
• Includes multi-purpose scraper, ideal for gasket scraping
• Set of 9 hooks, picks and scraper, ideal for the fitting
and removal of:
- O rings - Seals - Bushes - Springs - Cotter Pins - Fuses etc
• Supplied in moulded storage tray
• Contents: 4 x standard hooks & picks / 4 x mini hooks
& picks / 1 x straight edge
scraper
OFFER €29.95
SAVE €9.00
LIST PRICE €38.95
16
02251000
NEW
1/2” Impact Bar
Stud Remover & Installer Kit
• Unique design allows the installation and removal of studs without damaging the threads
• Suits all popular metric automotive studs
• Each stud size has one tool for removal
and one tool for installation
• Installation tool allows tightening
and torque without thread damage
• Kit includes:
- M6 x 1.0 / M8 x 1.25 / M10 x 1.25 /
M10 x 1.50 studs
NEW
88050000
• For loosening rusted or seized bolts using impact force
• Produces 8 x torque multiplication with each hammer blow
• Use with impact sockets and driver bits
• Bi-directional – use to loosen or tighten fasteners
• Swivel head aids with operation in limited access situations
• Impact absorbing
composite handle
€90.00
€90.00
30047500
WORKSHOP TOOLS & EQUIPMENT
Wireless Electronic Stethoscope Kit -“ChassisEAR”
• Designed for the detection of vehicle noises e.g. rattles, squeaks and air ingress under
load, during a road test and for the diagnosis of a wide variety of potential faults
e.g. wheel bearings, CV joints, differentials, transmission, injectors, alternators,
water pumps, AC compressors and many more
• Can be used on cars, vans, trucks, buses etc as there are no cable length issues
to overcome
• Consists of Receiver Unit, 4 x Transmitter Units (4 channels), 4 pick-up leads,
pick-up fixing straps, headphones, batteries, manual & storage case
N.B. Due care & consideration should be taken of driving conditions
and regulations when operating the ChassisEAR™ on the road.
€495.00
30077500
EGR Valve Activator
• For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use
• Prevents the unnecessary replacement
of EGR Valves
• Actuates EGR Valves in a fixed open
position for cleaning and in an open /
closed sequence for freeing carbon
deposits
• Choice of two test cycles: At the end
of either test cycle the tool gives an
audible indication when a faulty and
unserviceable EGR valve is connected
• Supplied with x3 connectors for
different makes of valves
• Power Supply: 220 ‐ 240V mains
• Open / Close Time Cycle: 90 sec
• Includes applications list - visit:
www.sykes-pickavant.com for details
Scan the QR
code to watch a
video of the EGR
Valve Activator
08770000
Universal Press Support Block
• Universal Support for use with a workshop press
• Easily press bearings on a wide variety of suspension arms
• Three point contact guarantees a perfect, safe support
• Adjustable height anvil bolts
• Swivel element for added versatility
OFFER €243.95
SAVE €14.00
016795V2
29 Pc. Alternator Free Wheel Pulley Set
17
• Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys
• Locks the alternator, allowing the central locking bolt of the pulley to be released
• Selection of 33 tooth reaction nuts and additional adaptors
• Updated 29 piece set covers a range of popular applications
OFFER €99.50
• Applications list included - Visit www.sykes-pickavant.com for
SAVE €29.45
full details
€282.50
FORCE
38680000
Mechanical Coil Spring Compressor
Workstation
Universal piece of equipment for assembling & disassembling struts & coil springs
• Standard workstation construction but with Heavy Duty Mechanical compression
components in place of pneumatic parts
• Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use
• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring
• Long main spindle achieves large 420mm of stroke – greater than our pneumatic workstations
• Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be
used with either hand tools or even impact air tools
• Includes adjustable vice clamp as standard
• Compatible with all other Sykes-Pickavant workstation standard jaws,
brackets & accessories
Tel: 01543 679900
OF
00KG
6
1
O
UP T
€1025.50
Scan the QR code to watch a video
of the suspension workstation range
)
AR
(AT 10 B
E
C
R
O
F
KG OF
452
UP TO 2
385800SP
WORKSHOP EQUIPMENT
Pneumatic Coil Spring Compressor Workstation Extra Heavy Duty Model c/w FREE Mercedes Bracket Set
Universal piece of equipment for assembling and disassembling struts and coil springs
• Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems
• Front and side spring clamps designed for fast changeover using unique Brackets System
• Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force
OFFER €2057.50
(at 10 bar) = 2452 kg
SAVE €193.50
• Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where
LIST
PRICE €2251.00
full spring compression is required
• Double-depth front plate for use on extra-long strut assemblies
• Safety locking valves system – locks safety cage and prevents usage with cage open
FREE MERCEDES BRACKET SET
RTH
WO09.50
€3
(38480100)
UPPER BRACKET FOR MERCEDES A, B, C, E CLASS &
LOWER BRACKET FOR MERCEDES E CLASS
WHEN YOU PURCHASE 385800SP
Optional Accessories for use with Suspension
Workstations
38480100
Mercedes Bracket
Set - A, B, C & E Class
38480200
Upper Jaw Set for High
Compression Springs
€55.00
€309.50
38480400
Special Bracket
Porsche Cayenne /
VW Touareg
€128.95
38480600
Special Bracket
Nissan Qashqai
38480500
Special Bracket
Mercedes C Class
(2010-)
€232.00
36600500
Fuel Extractor / Retriever
€553.50
• Retrieve fuel following a filling error,
removal of tank sender unit, changing or checking the
fuel gauge, rinsing the fuel tank during body work etc
• Operates from workshop compressed air (no
risk of sparks)
• Mobile 45‐litre tank (on wheels)
• Cleanly draws up or pushes out
fuel due to a venturi system
• Includes 2 anti‐static ground cables,
overflow line and 3 fuel probes
• Emptying via the tank filler neck or fuel lines
• Stainless steel
38480700
Double Depth
Strut Vice
€152.00
€126.50
18
DIESEL BLEEDING & FUEL INJECTION
31467500
Diesel Fuel System Bleeding Kit
Many modern diesel fuel systems are very difficult to self-bleed once the low
pressure feed circuit has been opened to the atmosphere.
The circuit may have been opened by removing the fuel filter or by a damaged
feed pipe. The pump unit contained in the kit enables the user to generate suction
by continually squeezing and releasing the hand pump to draw the air and fuel
through the low pressure system.
• Designed to allow the user to bleed / prime the low pressure feed side of the
diesel fuel system
• Contains common sized low pressure pipe sets including:
- Standard 8mm, 10mm and newer 9.65mm (3/8 inch)
- Renault small & large
- Ford
• Typical coverage includes Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall
• Supplied in tin
Features
• Clear pipes for visability of air bubbles
• Colour coded pipes for easy identification
• High grade reinforced pipes (rated over 10 bar)
• Pump incorporates one way valve for ease of use - i.e. just one hand required
€257.95
Scan the QR code to
watch a video of
the Diesel Fuel System
Bleeding Kit
Note: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe
31467600
Ratchet Pump Kit
• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit
(above) to generate faster flow
• Easily engages with all 3/8” Dr. air ratchets
• Retaining bracket holds pump during use for one-hand operation
• Supplied in plastic case
€128.95
31467000
Diesel Fuel System Bleeding Kit - Master Kit
• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump
• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution
• The pipes and gauge can also be used on petrol engines where applicable
• Ratchet pump provides a greater flow for when faster bleeding is required i.e on some Ford models
• Supplied in foam in plastic case
€495.00
31485300
Comprehensive Schrader Valve Test Set
19
• Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - above
• Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab
• Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails
• Quicker and easier than breaking into fuel lines
• Applications include:
Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover,
Mercedes, Mini, Saab, Vauxhall and Volvo
€141.95
NEW
Automatic Brake Bleeder - 12v
€754.50
Now includes aluminium Euro cap angled screw type
34303000
• Compatible with ABS systems
• 12v powering with reverse polarity warning
• Includes pump with automatic shut off valve
• Regulator from 0 to 3Bar
• 5L reservoir with visible level and min
level indication
• Auto power OFF when min level reached
• 12V power cable with jack (L: 4m)
• Fluid cable for brake fluid with quick
coupling system (Length: 4m)
• Includes fluid collection bottle & European
screw-on reservoir cap
• Stainless steel body
• Professional pump and regulator fitted
Brake Bleeder Cap - Starter Set
• Starter cap bleeder set suitable for ‘343’ range
of Electric Brake Bleeders
• Precision engineered aluminium caps for the
following applications:
- New Ford Fiesta (34301000)
- Nissan / Asian (Bayonet Type Cap) (34301100)
- Euro Cap - Angled (Screw Type Cap) (34301400)
• Full range of caps available - Contact Customer
Services for details
Tel: 01543 679900
34300100
OFFER €128.95
SAVE €41.05
Model specific caps also available - Ask for details
NEW
Industrial Pump Sprayer - 1 Litre
Includes adjustable brass spray head
nozzle and viton seals
Vehicle Fluid Change Syringe - 200cc
• Transparent design to easily view the fluid
• Suitable for fluid suction and supply in vehicle service
• Composite plastic resistant to brake fluid & antifreeze
• 200cc capacity with quick disconnect tube
• Industrial pump sprayer suitable for various
chemicals e.g. detergents, solvents, brake cleaner
and general cleaning agents*
• Polythene body with pressure relief valve
• Stainless steel piston rod
*Important: Before use, please
check the compatibility of the
product you wish to spray
OFFER €27.50
SAVE €4.50
BRAKING
03470000
66050400
LIST PRICE €32.00
€16.50
Flaremaster 2 - The Original Hand Held Automotive
Brake Pipe Flaring Tool
• Hydraulic power unit provides portable power for precision flaring
• Quick-release chuck for positive engagement of the punch
• Fast-turn coarse thread on hydraulic ram, for quick assembly
• Locking bolt with swivel pin, for fast tightening
• Enhanced bridge unit for greater strength
• Inter-changeable die, held in place by magnets
02729600
• Creates SAE & DIN single and double flares
• Create full, or part sections of pipe, which can be trimmed, flared or spliced as required
• Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work
or accident damage
• Supplied in moulded plastic box
Part Number / Description
Size
Contents
List Price
Save
Offer
02725000
Flaremaster2 Brake Pipe
Flaring Tool
4.75mm, 3/16” brake pipes
Flaremaster2
SAE & DIN single and double flares
€203.00
€36.00
€167.00
02725600
Flaremaster2 Brake Pipe
Flaring Tool
4.75mm, 3/16” & 6mm brake pipes
Flaremaster2
€241.95
€46.95
€195.00
02729500
Flaremaster2 Flaring Kit
Flaremaster2 / Brake Pipe Aid Plier
4.75mm, 3/16” brake pipes
Telescopic Tube Cutter (3-32mm)
Pipe Deburring Tool (3.2-16mm)
€254.95
€44.95
€210.00
02729600
Flaremaster2 Flaring Kit
Flaremaster2 / Brake Pipe Aid Plier
4.75mm, 3/16” & 6mm brake pipes
Telescopic Tube Cutter (3-32mm)
Pipe Deburring Tool (3.2-16mm)
€293.50
€48.50
€245.00
20
33145000
HGV Combustion Leakage Tester
NEW
• Fast and accurate diagnosis of cylinder
head gasket leaks
• Quick connector for use with 33140000
and 331400V2 cap adaptors
• Suitable for use with both petrol & diesel
engines
• Supplied with standard and sensitive
reaction test fluid (250ml)
03195000
HGV Airline Adaptor &
Pressure Gauge Assembly
NEW
• To be used on larger cooling systems i.e
HGV to speed up the pressurisation
process using a tyre inflater
• Includes pressure relief valve to prevent
over-pressurisation
• 30psi / 2 bar gauge
• For use with 33140000
and 331400V2 cap
adaptors
€109.50
€193.50
331400V2
NEW UPDATED KIT
HGV Cooling System Pressure Test Kit
COOLING
Updated kit now includes additional caps covering DAF LF, Renault D Series,
Caterpillar, Optare bus, MAN bus, Dart SLF and Agricultural vehicles
• Contents:
- High capacity metal bodied hand pump with 0 - 2.5 bar pressure gauge
- Quick-Connect Hose Assembly - 10 x Reservoir & Radiator Pressure Caps
• Dual Gauge measures in p.s.i and bar
• Additional Pressure Caps available - refer to applications guide
• Applications include:
DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo
€386.95
33165000
Speedfiller
NEW
• Unique multi-fit cone for universal use
• Also capable of connecting directly onto quick release
cooling caps from 315, 316 and 317 Series kits using adaptor
piece
• For replacing the coolant after opening or
draining the system
• Eliminates airlocks during refilling through
the use of vacuum
€167.50
Comprehensive applications listing provided with each kit
331595V2
‘315’ Series Cooling System Test Kit
• All components of the ‘315’ range are fully compatible with older SP Cooling
System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors.
For older systems with a threaded connection, adaptor 03186870 is available
• Contents:
- Hand Pump with Pressure Gauge & Quick-Release fitting OFFER €297.50
SAVE €76.50
- Hose Assembly c/w quick-release fitting
- 16 x Threaded Cooling System Cap Adaptors
- 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench
33159700
33159800
Cooling Cap Set - To update 33159500 Kit
• Set of 5 additional cap adaptors to update original 33159500 ‘315’ Series Cooling System Test Kit to present coverage
• Applications include: BMW, Chevrolet, Mercedes, Mini,
Saab & Vauxhall
21
Note: Full application details can be found on
our website: www.sykes-pickavant.com
OFFER €90.00
SAVE €13.00
Cooling Cap Set - To update 331595V2 Kit
• Set of 2 additional cap adaptors to update 331595V2 ‘315’ Series Cooling System Test Kit above to present coverage
• Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall
Note: Full application details can be found on
our website: www.sykes-pickavant.com
OFFER €48.50
SAVE €16.00
LIST PRICE €64.50
Ford 1.0 SCTi ‘Ecoboost’ 3 Cylinder Petrol
Engine Timing Kit
OFFER €484.95
SAVE €99.55
LATEST VEHICLE
COVERAGE
07766300
NEW
VW Group 1.0L 3 Cylinder Petrol
Engine Timing Kit
Applications:
OFFER €148.50
Volkswagen: up! (‘11-)
SAVE €31.00
Skoda: Citigo (‘11-)
Seat: Mii (‘12-)
Engine Codes: CHYA, CHYB, CPGA
07766200
VW Group 1.8L & 2.0L Petrol Engine Timing Kit
Applications:
Audi: A3, A4, A5, A6, Q3, Q5, TT (‘08-)
Seat: Altea/XL, Leon, Toledo, Exeo, Alhambra (‘08-)
Skoda: Yeti, Octavia II/III, Superb II (‘08-)
Volkwagen: Golf, Beetle, Jetta, Scirocco,
Eos, Passat/CC, Tiguan, Sharan,
Amorok (‘08-)
1.8TFSi Engine Codes:
CABD, CJEB, BYT, BZB, CDAA, CJSA,
CDAB, CJSB, CABA, CDHA, CABB, CDHB
2.0TFSi Engine Codes:
CCZA, CDNC, CFPA, CNCD, CAWA, CCZB,
CDND, CHHA, CPLA, CAWB, CCZC, CESA,
CHHB, CPSA, CBFA, CCZD, CETA, CJKA,
CCTA, CDNB, CFKA, CJKB
NEW
OFFER €244.00
SAVE €59.00
07756100
Seat / Skoda / Volkswagen 1.2L 6v/12v
3 Cylinder Petrol Engine Timing Kit
07755100
Renault Twin Cam 16v /
Opel Vauxhall 2.0L / Dacia 1.6L /
Nissan 1.6 & 2.0L Petrol Engine Timing Kit
• Set of locking tools required for cam belt service
Applications include:
Renault: Avantime, Clio 2 & 3, Espace, Kangoo, Laguna,
Logan, Megane, Modus, Scenic, Traffic, Twingo & Vel Satis
Opel / Vauxhall: Vivaro
Dacia: Duster, Logan, Sandero
Nissan: Kubistar & Primastar
Note: Full application details can be found on our website:
ENGINE TIMING
• Ford Applications:
Focus (‘12-), Fiesta (‘13-), B-Max (‘12-), C-Max (‘12-),
Transit Connect (‘13-), Ecosport (‘13-), Grand C-Max (‘12-),
Tourneo Connect (‘14-), Mondeo (‘14-), Transit Courier (‘14-)
• Engine Codes:
M1DA, M1JA, M1JE, M2DA, M2GA, P4JA, P4JB, SFJA, SFJB,
XMJA, XMJB
Tel: 01543 679900
NEW
07766100
• Set of locking tools required for chain maintenance
Seat: Cordoba, Ibiza
Skoda: Fabia 2, Roomster
Volkswagen: Fox, Polo IV / V
Note: Full application details can be
found on our website:
OFFER €75.00
SAVE €15.00
LIST PRICE €90.00
077523V2
Ford 1.25 - 2.3L / Mazda 1.25 - 2.5L /
Volvo 1.6, 1.8, 2.0L Petrol Engine Timing Kit
• Set of locking tools enabling correct valve timing
Ford: Cougar, Fiesta, Focus, Fusion, C Max, Galaxy, S Max, Mondeo, Puma
Mazda: 2, 3, 5, 6, 121, MPV, MX5, Tribute
Volvo: C30, S40, S80, V50, V70
Note: Full application details can be found on our website: www.sykes-pickavant.com
OFFER €69.95
OFFER €21.50
LIST PRICE €83.95
LIST PRICE €25.50
SAVE €14.00
SAVE €4.00
22
NEW
NEW
ERVICE
RO EQUIPMENT RANGE
A NEW RANGE OF PROFESSIONAL SERVICE STATIONS TO PROVIDE
A QUICK AND EFFICIENT WAY OF SERVICING FLUID SYSTEMS
53402500
53401500
Fortron Automatic Transmission Fluid
Flush Machine - Fully Auto
Fortron Coolant Flush Machine
• Suitable for all types of coolants and vehicles
• Includes a set of multi-application
adaptor fittings
• Effective way of flushing and
exchanging the complete
cooling system fluid
• Air operated and portable
• Can replace up to 100% of transmission fluid
• Ability to specify exact amount of fluid to
change
• Fully automatic and user friendly safe
• Includes comprehensive adaptor set
and Flush Service Kit
• Safely cleans up and
extends the service life
of automatic transmissions
€4508.50
€2573.50
53402600
ATF Flush Service Kit
• Includes bottle of Automatic
Transmission Flush and tube of Auto
Trans & Power Steering Concentrate
€14.95
53403500
53404500
Fortron Injector Max Machine
• Suitable for petrol and diesel engines
• Cleans the complete fluid systems without
disturbing / removing any key components
• Includes comprehensive adaptor set
and Injector Max
Fluids - Petrol &
Diesel
• Air operated
€2256.00
Fortron Power Steering
Flush Machine
• Replaces 100% of steering fluid
• Takes on average 10 minutes per service
• Extends the service life of
(often overlooked) system
• Revitalises and conditions
‘o’ rings and seals
• Portable, sturdy design
• Includes Power Steering Flush Service Kit
Includes comprehensive
adaptor set
53403600
53403700
Injector Max
Premix Solvent
- Petrol
Injector Max
Premix Solvent
- Diesel
€1283.50
53404600
Power Steering Flush
Service Kit
• Includes bottle of Power Steering
Flush and 50ml tube of Auto Trans & Power Steering Concentrate
€23.00
€23.00
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood,
Staffordshire, WS7 3FU. United Kingdom
Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901
e-mail: [email protected] www.sykes-pickavant.com
ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 31ST MARCH 2015 - REF: SPQ115EURO
COPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.
€14.95
Distributor Stamp:

Q1 2015 - Sykes Pickavant

Transcription

Similar documents

Where you come to know.

Johnny Tremain by Esther Forbes Objectives

SKYBOT HAND

official press kit 2015

ckc- St. LOUIS EXHIBITOR COUPONS 2016

Get It Together!

45 Plateau Incentive Program

Euro-Diagnostic Resources, Inc. Euro Auto Training

NAMURA TECHNOLOGIES NEW PRODUCT RELEASE

View Full Screen