docCROSS REFERENCE - Schwitzer
download 
Report Transcription
CROSS REFERENCE - Schwitzer
Borg-Warner ( Schwitzer ) Index Cross reference Schwitzer to Turbo International pages 1 - 10 Service kits by model pages 11 - 42 Journal Bearings see journal bearing section Piston Rings see piston ring section Schwitzer service kits by turbo model Turbo Kit Model page no S1B S2A S2B wide bearing g S2B narrow bearing S2D S2E wide bearing 3LD 3LM S3 S3A S3B 4LE 4LF 4LG 4LGK 4LGZ 4LHR S4 S4D S4T S76 S100 S200 S300 11-12 13-14 15-16 17-18 19-20 15-16 21-22 23-24 27-28 27-28 29-30 31-32 31-32 31-32 31-32 31-32 25-26 33-34 33-34 35-36 23-24 11-12 37-38 39-40 S400 41-42 S500 35-36 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. Turbo International Part No. 7-B-0674 7-C-1271 7-C-3515 7-C-3645 8-C-0901 8-C-0902 8-C-0903 8-C-0904 8-C-0905 8-C-0907 8-C-0908 8-C-0909 8-C-1394 8-C-1395 8-C-1399 8-C-1400 8-C-1401 8-C-1402 8-C-1532 8-C-1552 8-C-1553 8-C-1667 8-C-1681 8-C-1683 8-C-1684 8-C-1686 8-C-1688 8-C-1689 8-C-1690 8-C-1691 8-C-1692 8-C-1746 8-C-1770 8-C-1773 8-C-1774 8-C-1775 8-C-2024 8-C-2025 8-C-2026 8-C-2027 8-C-2028 8-C-2029 8-C-2030 8-C-2031 8-C-2037 8-C-2095 8-C-2096 Description SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT JOURNAL BEARING STD/5 JOURNAL BEARING STD/10 JOURNAL BEARING 5/STD JOURNAL BEARING 5/5 JOURNAL BEARING 5/10 JOURNAL BEARING 10/5 JOURNAL BEARING 10/10 JOURNAL BEARING 15/STD JOURNAL BEARING 20/5 JOURNAL BEARING 20/10 JOURNAL BEARING 10/STD JOURNAL BEARING 20/STD JOURNAL BEARING 10/10 JOURNAL BEARING STD/10 PISTON RING T/END 10/STD PISTON RING T/END STD/10 PISTON RING T/END STD/20 JOURNAL BEARING, GROOVED I/D & END,10/20 PISTON RING C/END 10/STD PISTON RING T/END 10/10 PISTON RING T/END 10/20 PISTON RING C/END 10/STD PISTON RING T/END 10/STD PISTON RING T/END STD/10 PISTON RING T/END 10/10 PISTON RING T/END STD/20 PISTON RING T/END 10/20 JOURNAL BEARING, GROOVED END ONLY, 10/20 PISTON RING T/E 10/STD PISTON RING C/E 10/STD PISTON RING C/E 10/STD PISTON RING C/E 10/STD JOURNAL BEARING, 0.341" wide, STD/5 JOURNAL BEARING, 0.341" wide, STD/10 JOURNAL BEARING, 0.341" wide, 5/STD JOURNAL BEARING, 0.341" wide, 5/5 JOURNAL BEARING, 0.341" wide, 5/10 JOURNAL BEARING, 0.341" wide+E1632, 10/STD JOURNAL BEARING, 0.341" wide, 10/5 JOURNAL BEARING, 0.341" wide, 10/10 PISTON RING T/END 10/STD JOURNAL BEARING, STD/10 JOURNAL BEARING, 10/STD Schwitzer- 6/13/2007 -1 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application H2B 4LGK/4LGZ S4D S3A 3LM 3LM 3LM 3LM 3LM 3LM 3LM 3LM 3LM 3LM S2A S2A S2A S2A 3LM 3LM 3LM 4HD/4MD 3LM 3LM 3LM 4HD/MD 4HD/MD 4HD/MD 4HD/MD 4HD/MD 4HD/MD 4HD/4MD S2A/S2B S2A/S2B S3A S4/S4A/S4D/S S2B S2B S2B S2B S2B S2B S2B S2B S3/S4 S3A S3A CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. Turbo International Part No. 8-C-2097 8-C-2098 8-C-2099 8-C-2267 8-C-2292 8-C-2392 8-C-2393 8-C-2394 8-C-2395 8-C-2396 8-C-2397 8-C-2398 8-C-2399 8-C-2414 8-C-2415 8-C-2416 8-C-2920 8-C-2921 8-C-2949 8-C-2951 8-C-2952 8-C-2953 8-C-3030 8-C-3045 8-C-3046 8-C-3047 8-C-3090 8-C-3091 8-C-3092 8-C-3101 8-C-3102 8-C-3104 8-C-3111 8-C-3112 8-C-3113 8-C-3114 8-C-3386 8-C-3387 8-C-3388 8-C-3389 8-C-3390 8-C-3391 8-C-3392 8-C-3393 8-C-3452 8-C-3537 8-C-3579 Description JOURNAL BEARING, 10/10 JOURNAL BEARING, 20/STD JOURNAL BEARING, 20/10 JOURNAL BEARING, GROOVED I/D & END, STD/20 JOURNAL BEARING, GROOVED I/D & END, 20/20 JOURNAL BEARING STD/5 JOURNAL BEARING STD/10 JOURNAL BEARING 5/STD JOURNAL BEARING 5/5 JOURNAL BEARING 5/10 JOURNAL BEARING 10/STD JOURNAL BEARING 10/5 JOURNAL BEARING 10/10 JOURNAL BEARING STD/10 JOURNAL BEARING 10/STD JOURNAL BEARING 10/10 PISTON RING T/END STD/10 PISTON RING T/END STD/20 PISTON RING T/END STD/10 PISTON RING T/END 10/STD PISTON RING T/END 10/10 PISTON RING T/END 10/20 JOURNAL BEARING, GROOVED END ONLY, 20/20 JOURNAL BEARING STD/20 JOURNAL BEARING 15/5 JOURNAL BEARING 15/15 PISTON RING T/END STD/10 PISTON RING C/END 10/10 PISTON RING C/END STD/20 PISTON RING C/END 10/20 PISTON RING C/END STD/10 PISTON RING C/END STD/20 PISTON RING C/END STD/10 PISTON RING C/END 10/10 PISTON RING C/END STD/20 PISTON RING C/END 10/20 JOURNAL BEARING, STD/5 JOURNAL BEARING, STD/10 JOURNAL BEARING, 5/STD JOURNAL BEARING, 5/5 JOURNAL BEARING, 5/10 JOURNAL BEARING, 10/STD JOURNAL BEARING, 10/5 JOURNAL BEARING, 10/10 JOURNAL BEARING, GROOVED END ONLY, STD/20 JOURNAL BEARING STD/15 PISTON RING T/END STD/10 Schwitzer- 6/13/2007 -2 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S3A S3A S3A 4HD/4MD 4HD/4MD S2B S2B S2B S2B S2B S2B S2B S2B S1B S1B S1B S3A/S3B/S4/S S3A/S3B/S4/S S2A S2A S2A S2A 4HD/4MD 3LM 3LM 3LM S4H S4H S4H S4H S4H S4H S2A S2A S2A S2A S300 S300 S300 S300 S300 S300 S300 S300 4HD/4MD 3LM S3B CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 125647 125647 125647 127305 128936 129119 129119 129120 129533 129577 130282 132040 132040 132044 132044 135209 137943 138363 139055 139265 139572 140964 141073 141525 142228 142229 142869 144079 144080 144315 144334 146608 146740 146808 Turbo International Part No. 8-C-3623 8-C-3624 8-C-3625 8-C-3626 8-C-3627 8-C-3700 8-C-3701 8-C-3744 8-C-3746 8-C-3748 8-C-3775 8-D-2023 8-C-2787 8-B-0391 8-C-1685 8-C-1687 8-B-0077 8-C-1772 8-A-0696 8-C-3415 8-B-3119 8-B-0047 8-B-0527 8-B-0517 8-A-0987 8-C-3419 8-A-0271 8-C-3416 8-B-0387 8-B-0076 8-B-0045 8-B-3089 8-B-0982 8-C-0835 8-B-0397 8-B-0078 8-B-0390 8-B-0396 8-C-1196 8-B-0731 8-B-1025 8-B-0052 8-C-2985 8-B-0387 Description JOURNAL BEARING, 5/STD JOURNAL BEARING, 10/STD JOURNAL BEARING, 20/STD JOURNAL BEARING, 5/5 JOURNAL BEARING, 10/10 JOURNAL BEARING STD/5 JOURNAL BEARING STD/10 JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, STD/5 JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, 5/STD JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, 5/5 JOURNAL BEARING, 10/STD JOURNAL BEARING, 10/STD JOURNAL BEARING 5/STD PISTON RING T/END STD PISTON RING C/END STD PISTON RING T/END STD RETAINING RING, INSERT PISTON RING C/E STD GASKET, OIL INLET GASKET, OIL INLET GASKET, OIL OUTLET RETAINING RING PISTON RING C/END STD RETAINING RING, J/BRG GASKET, TURBINE INLET, SINGLE PORT GASKET, TURBINE INLET, SINGLE PORT GASKET, TURBINE INLET, SINGLE PORT NARROW GASKET, TURBINE INLET, SINGLE PORT NARROW PISTON RING T/END STD USE 140964 JOURNAL BEARING STD JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, STD O RING, C/END THRUST SPACER THRUST BEARING LOCKNUT, SHAFT THRUST RING O RING, C/END OIL CONTROL SLEEVE JOURNAL BEARING, GROOVED END ONLY, STD THRUST BEARING JOURNAL BEARING STD USE 182250 THRUST COLLAR O RING, B/HSG. USE 192871 PISTON RING T/END STD Schwitzer- 6/13/2007 -3 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S200 S200 S200 S200 S200 S200 S200 4HD/4MD 4HD/4MD 4HD/4MD S400/S410W K03/K04 S3B 3LD 4HD/MD 4HD/MD 3"/VARIOUS S3A VARIOUS S2B 4MF 4" 4LGK 4LE/HT3B S3A 3LM/3LD S2B HT3B/HC3B 4"/Various 4HD/4MD 4HD/4MD HT3B 4"/Various 4MF 3LD 4LE/HT3B 4LE 4HD/4MD 3LD 3LD HT3B S3B/3LK 4LE CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 147837 147837 148062 148062 148225 148337 151242 151242 152408 155290 155433 155434 157458 157602 157962 158144 158146 158147 166084 166118 166119 166120 166121 166122 166193 166496 167048 167416 167492 167541 167546 167548 167558 167657 167743 167747 167748 167750 167785 167786 167787 167788 167799 168984 168984 181750 181751 Turbo International Part No. 8-A-0062 8-C-3413 8-B-0063 8-C-3418 8-B-0890 8-B-1584 8-B-0064 8-C-3501 8-B-0052 8-C-1366 8-C-1368 8-C-3749 8-B-3119 8-C-0066 8-C-0067 8-C-1741 8-B-0888 8-B-0980 8-C-1226 8-C-1227 8-C-1225 8-C-1228 8-C-1229 8-C-1725 8-C-2986 7-C-3491 8-C-3385 8-C-3482 8-C-3490 8-C-3488 8-C-3487 8-C-3489 8-C-3479 8-C-3481 8-C-2990 8-C-2991 8-C-3480 8-C-3498 8-C-3499 8-C-3496 8-C-3495 8-C-3502 7-A-0608 Description GASKET, OIL INLET GASKET, OIL INLET GASKET, OIL OUTLET GASKET, OIL OUTLET JOURNAL BEARING 10/10 OIL SLINGER O RING, OIL PLATE O RING, SEAL PLATE THRUST COLLAR SPACER SLEEVE WEAR RING USE 186135 JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, 10/10 GASKET, OIL OUTLET FLINGER SLEEVE THRUST BEARING JOURNAL BEARING, GROOVED END ONLY, 10/STD JOURNAL BEARING 10/STD OIL SEAL PLATE JOURNAL BEARING 10/STD JOURNAL BEARING 20/STD JOURNAL BEARING 10/10 JOURNAL BEARING STD/10 JOURNAL BEARING 20/10 GASKET, OIL OUTLET LOCKNUT, SHAFT, L/HAND THREAD CAPSCREW & LOCKWASHER, C/END JOURNAL BEARING STD LOCKNUT, SHAFT, L/HAND THREAD LOCKNUT, SHAFT, L/HAND THREAD THRUST SLEEVE RETAINING RING, J/BRG. THRUST BEARING JOURNAL BEARING STD THRUST BEARING PISTON RING STD PISTON RING STD THRUST SLEEVE THRUST SLEEVE THRUST BEARING JOURNAL BEARING STD RETAINING RING, J/BRG. LOCKNUT, SHAFT, L/HAND THREAD USE 318372 SERVICE KIT, STEP BORE USE 318364 USE 318350 Schwitzer- 6/13/2007 -4 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application VARIOUS S1A, S1B, S2A 3LD S3A 4LE/HT3 4LE 3"/4"/HT3B 3"/4"/HT3B/S4 HT3B 3LKS 3LKS 4HD/4MD HT3B 3LM 3LM 4HD/4MD 4LE/HT3 HT3B S4A & D S4A & D S4A & D S4A & D S4A & D S3B S3/S3A/S3B S300 S300 S2B/S200 S300 S300 S300 S300 S200 S200 S100/S200+F2 S100 S200 S400/S410W S400/S410W S400/S410W S400/S410W S400/S410W TA31/TA35/TO CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 181751 181929 182042 182250 182252 182253 182255 182258 182260 182421 182438 182561 182562 182668 183188 183211 183223 183225 183472 184798 185299 185319 185727 185854 185856 185857 185859 185860 186135 186135 186147 186147 186148 186790 186790 186791 186794 186796 186830 186835 186838 186839 186840 186841 186841 186841 186842 Turbo International Part No. 7-C-0815 8-C-0068 8-D-0406 8-B-1129 8-C-0906 8-C-1270 8-C-1273 8-C-3747 8-C-1743 8-D-1708 8-C-1369 8-C-1378 7-C-0787 7-C-0670 8-C-3093 8-B-0064 8-B-0089 8-B-0884 8-C-1744 8-C-1745 8-C-1497 8-C-1665 8-B-0395 8-C-1682 8-C-1196 8-A-1213 8-A-0252 8-A-0256 8-A-0149 8-A-0240 8-A-0254 8-A-0253 8-A-0241 8-A-0138 8-A-1555 8-C-1748 8-C-3477 8-C-1749 Description SERVICE KIT JOURNAL BEARING STD PISTON RING C/END STD JOURNAL BEARING 20/STD JOURNAL BEARING 10/STD JOURNAL BEARING 20/STD JOURNAL BEARING 20/STD JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, 10/STD JOURNAL BEARING, GROOVED END ONLY, 20/STD BOLT CAP SCREW USE 188379 USE 138363 USE 192510 FILTER SERVICE KIT SERVICE KIT USE 318367 USE 166084 PISTON RING T/END 10/20 USE 5223-711-0002 O RING, OIL PLATE LOCKNUT JOURNAL BEARING STD/10 JOURNAL BEARING, GROOVED END ONLY, STD/10 JOURNAL BEARING, GROOVED END ONLY, 20/10 JOURNAL BEARING, GROOVED END ONLY, STD/10 JOURNAL BEARING, GROOVED I/D & END, 20/10 PISTON RING T/END STD PISTON RING T/END,5/STD-C/END STD USE 142869 JOURNAL BEARING, GROOVED END ONLY, STD USE 192871 USE 444506-0001 THRUST COLLAR, 2 X 8 HOLES LOCKPLATE, B/HOUSING JOURNAL BEARING STD RETAINING RING, J/BRG THRUST BEARING, 3 HOLE LOCKPLATE, C/END CLAMP, C/END CLAMP, T/END SEAL RING, S/PLATE, VITON i/d 2.183" PISTON RING T/END STD PISTON RING T/END STD PISTON RING C/END STD PISTON RING C/END STD Schwitzer- 6/13/2007 -5 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application 4LE/4LF 3LM K26 4LE 3LM 3LM 3LDA 4HD/4MD 4HD/4MD K26 3LKS 3LKS 4HD 4LE/4LF/4MF 3LM S4H 3LD HC3 4LE/HT3 4HD/4MD 4HD/4MD 4HD/4MD 4HD/4MD S2/3FD 3LM/S2B 3LKS 4HD/4MD T4 TO4 T3/4 TB03/TO4B T3/4 TO4/TO4B TO4 TB03/TO4B Various T3 S2A S300 S2A/S2B CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 186844 186847 186879 186880 186881 186882 186882 186891 187197 187197 187248 188379 188470 188956 188985 188990 189906 189909 191750 191975 191996 192510 192511 192512 192871 192879 192880 192881 193710 194279 194281 194581 194658 194798 194914 194931 194932 196007 196009 196021 196284 196284 196424 196457 197275 197276 197470 Turbo International Part No. 8-C-1618 8-A-0242 4-A-0323 4-A-1331 4-A-0323 4-A-1331 4-A-2047 8-C-0835 7-B-0981 8-C-1366 8-B-0088 8-C-0069 8-B-0087 8-C-2573 8-A-0137 8-C-2094 8-C-1728 8-B-0070 8-C-3000 8-A-0164 8-B-0397 8-A-0163 8-C-1197 8-C-1626 8-C-1496 8-C-1658 8-C-1245 8-C-1579 8-C-1246 8-C-1576 8-C-1730 8-C-1726 8-C-1247 8-C-1704 8-C-1468 8-B-0098 8-B-0979 8-C-1729 8-C-3770 8-C-3485 8-C-1246 8-C-1248 8-C-1915 8-C-1731 Description BOLT, T/END LOCKPLATE, T/END BEARING HOUSING, OIL COOLED BEARING HOUSING, OIL COOLED BEARING HOUSING, OIL COOLED BEARING HOUSING, OIL COOLED BEARING HOUSING, OIL COOLED THRUST BEARING USE 318354 SERVICE KIT SPACER SLEEVE THRUST BEARING GASKET, BACKPLATE/BEARING HOUSING THRUST BEARING JOURNAL BEARING STD RETAINING RING, J/BRG JOURNAL BEARING, STD THRUST RING PISTON RING C/END STD DUCTILE USE 318368 LOCKNUT LOCKNUT, SHAFT LOCKNUT, SHAFT LOCKNUT, SHAFT JOURNAL BEARING, GROOVED I/D & END, STD JOURNAL BEARING, GROOVED I/D & END, 10/10 JOURNAL BEARING, GROOVED I/D & END, 10/STD JOURNAL BEARING, GROOVED I/D & END, 20/STD O RING LOCKNUT, SHAFT O RING CLAMP T/END O RING PISTON RING T/END STD JOURNAL BEARING STD JOURNAL BEARING, 0.341" wide, STD SPACER RING FLINGER SLEEVE OIL BAFFLE RETAINING RING USE 197752 THRUST BEARING BOLT, T/END O RING SPACER THRUST WASHER WEAR WASHER Schwitzer- 6/13/2007 -6 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S2B TO4/TO4B T3/T4 T3/T4 T3/T4 T3/T4 T3 4"/Various 4LHR 3LKS 3LD 3LM HT3B S4A/H TV/T12/T18 S3A S3B 3LM S4D 3LM/3LD 4MF TB03/TO4B 4HD/4MD 4HD/4MD 4HD/4MD 4HD/4MD S2A S2B S2A S2B S3B S3A/S3B/S4/S S2A S2B S2B HT3B HT3B S3B S3A/S3B S2B/S200/S30 S200/S300 S2A S2D S3B CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 197651 198291 198354 198689 199113 199909 199910 199973 199974 199975 199976 199977 310042 310062 310063 310063 310063 310278 310279 310291 310503 310628 310668 310671 310694 310694 310719 310724 310797 310871 310871 310938 310946 310947 310979 310987 310996 311013 311020 311300 311438 311496 311496 311534 311585 311588 311589 Turbo International Part No. 8-B-1653 8-C-3745 8-C-1393 8-C-1249 8-C-1216 8-C-1230 8-C-1217 8-C-1220 8-C-1221 8-C-1219 8-C-1222 8-C-1223 4-A-0323 7-D-1931 7-A-0608 7-A-2436 8-B-0527 8-C-1649 8-C-1370 8-B-0391 7-E-0656 8-E-0706 7-E-0649 8-A-0709 8-C-3417 8-C-2998 8-C-1351 7-C-1864 8-B-0423 8-C-2999 8-D-1516 8-D-0670 8-D-0413 8-D-0917 8-C-1347 8-D-0412 7-D-1355 8-C-1379 7-C-1255 4-A-0323 8-A-0270 8-C-3412 7-C-1583 8-C-1348 8-C-1251 8-C-1252 Description INSERT JNL.BRG, NON-GROOVED, RAD.DRILLED HOLES, STD/10 JOURNAL BEARING, GROOVED, 10/10 LOCKNUT, V CLAMP JOURNAL BEARING STD WASHER, SPEED CONTROL JOURNAL BEARING STD JOURNAL BEARING 10/STD JOURNAL BEARING 20/STD JOURNAL BEARING 10/10 JOURNAL BEARING STD/10 JOURNAL BEARING 20/10 BEARING HOUSING, OIL COOLED SERVICE KIT USE 318372 SERVICE KIT, STEP BORE, l/h & r/h locknuts SERVICE KIT PISTON RING C/END STD PISTON RING C/END STD S/WASHER PISTON RING SERVICE KIT O-RING, CARBON SEAL ø 0.364"x0.07" SERVICE KIT, S/PLATE 10mm HOLE GASKET, TURBINE INLET, DUAL PORT WIDE GASKET, TURBINE INLET, DUAL PORT WIDE O RING, INSERT PISTON RING C/E STD SERVICE KIT O RING, S/PLATE O RING WASHER JOURNAL BEARING STD OIL SHIELD BOLT, HEX HEAD, M6 x 1.0-6H x 12 mm THRUST COLLAR BOLT, B/HOUSING SERVICE KIT RETAINING RING, J/BRG SERVICE KIT BEARING HOUSING, OIL COOLED GASKET, OIL OUTLET GASKET, OIL OUTLET SERVICE KIT GASKET, OIL OUTLET SEYSCREW LOCKNUT Schwitzer- 6/13/2007 -7 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application 4LE 4HD/4MD 4MD S2A S3B S4A & D S4 S3B S3B S3B S3B S3B T3/T4 4LGZ TA31/TA35/TO TO4B HC3B/HT4B 3LM 3LKS 4MF TCO5/6 TCO4 TC04 TO4 S2A/S2B S3/S3A 4LGZ/S4D 3LM H2C/H2B S4D K26 K26 K26 K16/KO3/KO4 S2A K26 K28 S2B S2A T3/T4 TO4B S1A, S1B, S2A S2B S2A S2A S2A CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 311698 311699 311708 311740 311750 311754 311857 311876 311888 311889 311899 311901 311902 311903 311979 311994 312336 312344 312345 312346 312347 312379 312431 312455 312617 312617 312638 312690 312690 312696 312697 312719 312746 312758 312868 313015 313248 313286 313566 313627 313765 313783 313805 313861 315320 315377 315534 Turbo International Part No. 8-C-1349 8-C-1350 5-A-1210 8-A-0257 8-B-0397 8-D-0407 8-C-2982 8-A-0345 8-A-0028 8-A-0265 8-A-0244 8-A-0164 8-A-0165 8-A-0167 8-A-0172 7-C-1287 8-A-0334 8-A-0156 8-A-0157 8-A-0155 8-A-0286 4-A-1333 7-A-0830 8-C-2391 8-A-0271 8-C-3414 7-C-1403 7-A-0014 7-A-0802 7-C-1733 8-D-0406 8-C-1254 8-C-3201 8-C-2427 8-C-1462 7-C-3484 8-A-0240 8-C-3483 7-D-1930 8-D-0403 8-C-3492 8-C-2989 7-C-1461 8-C-2983 8-C-3493 8-C-2992 Description GASKET, TURBINE INLET GASKET, OIL OUTLET BACKPLATE, DYNAMIC JOURNAL BEARING STD LOCKNUT, SHAFT O RING, C/END PISTON RING C/END STD LOCKPLATE, BACKPLATE THRUST COLLAR, 3/8" DIA. SHAFT THRUST SPACER WASHER, WEAR LOCKNUT, SHAFT LOCKNUT, SHAFT, 3/8" BOLT, B/HOUSING BOLT SERVICE KIT CLAMP, C/END BOLT, T/END, metric thread BOLT, C/END, metric thread BOLT, B/HOUSING, metric thread GASKET, COMP.HSG ./BRG.HSG. BEARING HOUSING, OIL COOLED SERVICE KIT JOURNAL BEARING STD GASKET, TURBINE INLET, SINGLE PORT NARROW GASKET, TURBINE INLET, SINGLE PORT NARROW SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT PISTON RING C/END STD THRUST BEARING GASKET, TURBINE INLET JOURNAL BEARING STD PISTON RING T/E STD CAPSCREW & LOCKWASHER, C/END THRUST BEARING, 3 HOLE O RING ø SERVICE KIT THRUST BEARING O RING PISTON RING STD SERVICE KIT PISTON RING T/END STD USE 313805 O RING PISTON RING STD Schwitzer- 6/13/2007 -8 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S2A S2A T3/T4 VARIOUS 4MF K26 S1B/S100 TV SERIES T18/THO8A TV60/80/THO8 TV/T18 TV/12/18 TV61/63 VARIOUS T4 S2A TBO3 TBO3 TBO3 TBO3 TBO3 T3 TO4 S2B S2A S2B S3B TA31 TA/TB/T3 S3B K26 S2A S2A/S1B/S1A/ S1B S4D S200 T3/4 S200 K27 K26 S300 S100 S2D S2B/S2D S300 S100/S200 CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 315535 315536 315962 315963 316065 316069 316074 316077 316078 316080 316081 316082 316093 316193 316328 316557 316616 316617 316618 316619 316620 316621 316622 316624 317324 317589 318350 318351 318352 318352 318354 318355 318364 318366 318366 318367 318368 318372 318372 318377 318378 318383 318385 318386 318389 318391 318392 Turbo International Part No. 8-C-2993 8-C-3497 8-B-0090 8-B-2425 8-B-0115 8-B-0114 8-B-0103 8-B-0119 8-B-0116 8-B-0092 8-B-0527 8-B-0108 7-B-0647 8-C-2984 8-C-3503 8-C-2997 8-B-0109 8-B-0085 8-B-0070 8-B-0395 8-B-0422 8-B-0795 8-B-0084 8-B-0086 8-C-3500 8-C-3504 7-C-1830 7-B-0642 7-C-0983 7-C-3753 7-B-0981 7-C-1830 7-B-0730 7-D-1358 7-C-0670 7-A-0830 7-A-2823 7-C-2981 7-C-3512 7-C-3478 7-C-0670 7-C-1733 7-C-3513 7-C-3773 7-C-3772 Description PISTON RING STD PISTON RING T/END JOURNAL BEARING STD THRUST BEARING, CLOCKWISE FLOW OIL DEFLECTOR SHIM, THRUST BEARING LOCKPLATE, T/END O RING, B/HSG., VITON, i/d 2.736" SCREW, B/HSG. RETAINING RING, J/BRG PISTON RING C/END STD PISTON RING T/END STD SERVICE KIT PISTON RING T/END STD LOCKNUT, V BAND PISTON RING STD THRUST BEARING JOURNAL BEARING STD PISTON RING C/END STD DUCTILE PISTON RING T/END STD RETAINING RING, S/PLATE LOCKPLATE SCREW , T/BRG LOCKWASHER, C/END PISTON RING C/END STD PISTON RING T/END SERVICE KIT SERVICE KIT, STEP BORE SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT USE 5223-711-0002 USE 523-711-0002 SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT, less thrust ring SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT SERVICE KIT Schwitzer- 6/13/2007 -9 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S300 S400/S410W HC5A/HT4B HC5A HC5A HC5A HC5A H2A/HT4B/HC HT4B/HC5A HT4B/HC5A HC3B/HT4B HC5A HC5/HC5A S3B 4MD/HC3/S40 S500 H1A/H2C H2B/H2C H2C H2C/H2B H2C/H2B HC2 H1A/H2C H2C S400/S410W S400 4LGZ 4LG HT3B/4LHR HT3B 4LHR 4LGZ 3LD/3LDJ 3LK 3LM TO4 TO4B S2A S2B S200 3LM S3B S3B S3A S3A CROSS REFERENCE - Borg Warner (Schwitzer) to Turbo International OEM Part No. 318393 318396 318397 318417 318418 318419 318421 510042 510927 52786 Turbo International Part No. 7-C-3486 7-C-3494 7-C-3494 7-C-3197 7-C-3198 7-C-3199 7-C-3200 8-B-0523 Description SERVICE KIT SERVICE KIT SERVICE KIT GASKET KIT GASKET KIT GASKET KIT GASKET KIT USE 318350 LOCKNUT, V BAND USE 192510 Schwitzer- 6/13/2007 -10 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. Turbo Model Application S300 S400/S410W S400 S4T S300 S2B S2A/S1B/S1A/ 4MD/HC3 This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 11 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S1B Item no. 1 2 3 4 5 6 7 8 9 10 11 Description Journal bearing Retaining ring, jnl/brg. Piston ring,t/end Thrust sleeve Thrust bearing Oil deflector Flinger sleeve Piston ring, c/end Seal ring, brg/hsg Retaining ring, insert Locknut, r/h thread S100 TI Qty/ TI Kit no. Part no. Turbo n/a 8-C-2427 8-C-1772 8-C-2982 - 2 4 1 1 1 1 1 1 1 1 1 See JOURNAL BEARING section for oversize & under-size parts - page 53 See PISTON RING section for oversize parts - page 58 See GASKET section Schwitzer - 6/14/2007 - 12 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 13 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S2A Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 Description Journal bearing Retaining ring, jnl/brg. Piston ring,t/end Thrust ring Thrust bearing Spacer sleeve Oil deflector Flinger sleeve Piston ring, c/end Seal ring, insert Insert Retaining ring, insert Locknut, r/h thread Locknut, l/h thread Bolt, c/end Clamp, c/end O ring, brg.hsg/c.hsg Bolt, t/end Clamp, t/end Nut, v band TI Qty/ TI Kit no. Part no. Turbo 7-C-2981 8-C-1247 8-A-0149 8-C-1462 8-C-1915 8-C-1254 8-C-1248 8-C-1749 8-C-1246 8-A-0163 8-A-1869 8-C-1245 8-C-1249 2 4 1 2 1 1 1 1 1 1 1 1 1 1 a a a a a q q q a a q q a a 1 q 1 a See JOURNAL BEARING section for oversize & under-size parts - page 54 See PISTON RING section for oversize parts - page 59 See GASKET section Schwitzer - 6/14/2007 - 14 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 15 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S2B - wide bearing Item no. 1 2 3 4 5 6 6 6 7 8 9 10 11 12 13 14 14 15 16 17 18 Description Journal bearing, wide Retaining ring, jnl/brg. Piston ring, t/end Spacer ring Thrust ring Thrust bearing S2B Thrust bearing S2E Thrust bearing S2B Thrust ring Oil deflector Flinger Piston ring, c/end Seal ring, insert Insert Retaining ring, insert Locknut, l/h thread Locknut, r/h thread Bolt, c/end Clamp, c/end O ring Bolt, t/end S2E - wide bearing TI Qty/ TI Kit no. Part no. Turbo 7-C-3512 8-C-2391 8-C-1379 8-C-1682 8-C-1468 8-C-1254 8-C-1749 8-C-1246 8-C-1579 8-C-3482 8-C-3485 8-C-1245 8-C-1618 2 4 1 1 2 1 1 1 1 1 a a a a q a q q q q 1 1 a a q q a a a q a a 1 1 1 4 1 4 See JOURNAL BEARING section for oversize & under-size parts - page 56 See PISTON RING section for oversize parts - page 59 See GASKET section Schwitzer - 6/14/2007 - 16 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 17 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S2B - narrow bearing Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Description Journal bearing, narrow Retaining ring, jnl/brg. Piston ring,t/end Wear washer Thrust ring Thrust bearing Spacer sleeve Oil deflector Flinger sleeve Piston ring, c/end Seal ring, insert Insert Retaining ring, insert Locknut, l/h thread Bolt, c/end Clamp, c/end O ring, brg.hsg/c.hsg Bolt, t/end Clamp, t/end Gasket, oil inlet Gasket, oil outlet Gasket, t/inlet TI Qty/ TI Kit no. Part no. Turbo 7-C-1583 8-C-1704 8-C-1379 8-C-1682 8-C-1468 8-C-1254 2 4 1 2 2 1 8-C-1749 8-C-1246 8-C-1579 8-C-1245 8-C-1618 8-C-1576 8-C-3413 8-C-1348 8-C-3414 1 1 1 1 1 1 4 2 1 1 1 a a a a q a q q q a a q q q q q q a a a a a See JOURNAL BEARING section for oversize & under-size parts - page 55 See PISTON RING section for oversize parts - page 59 See GASKET section Schwitzer - 6/14/2007 - 18 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 19 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S2D Item no. 1 2 3 4 5 6 7 9 9 10 11 Description Retaining ring, jnl/brg. Journal bearing Piston ring,t/end Thrust bearing Thrust ring Piston ring, c/end Seal ring, brg/hsg Locknut, r/h thread Locknut, l/h thread Seal ring, c/end Nut, v band Gasket, oil inlet Gasket, oil outlet Gasket, t/inlet TI Qty/ TI Kit no. Part no. Turbo 7-C-2439 7-C-1461 8-A-0149 8-A-0256 8-C-1462 8-C-1254 8-C-1915 8-C-1749 8-C-1246 8-A-0163 8-A-1869 8-C-1245 8-C-1249 8-A-0062 8-C-1348 8-C-1349 4 2 1 1 1 1 1 1 1 1 1 1 1 1 a a a a a a a a a a a q q q a a a a a a a a q q a a a a See JOURNAL BEARING section for oversize & under-size parts - page 5 See PISTON RING section for oversize parts - page 59 See GASKET section Schwitzer - 6/14/2007 - 20 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 21 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer 3LD Item no. 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 Description TI Qty/ TI Kit no. Part no. Turbo 7-B-0730 Journal bearing 8-B-1025 Piston ring, t/end,smooth bo 8-B-0391 Piston ring, t/end,step bore 8-B-0387 Thrust washer 8-B-0384 Thrust bearing 8-B-0731 Thrust ring 8-B-0078 O ring, s/plate 8-B-0064 Retaining ring, s/plate 8-B-0077 Oil slinger Piston ring, c/end 8-B-0391 Locknut, shaft 8-B-0417 Bolt, c/end Lockwasher, c/end 8-B-0521 Washer, c/end 8-B-0790 Locknut, V band 8-B-0523 Gasket, oil inlet 8-B-0093 Gasket, oil outlet 8-B-0094 Gasket, turbine inlet 8-A-0271 1 2 1 1 1 1 1 1 1 3 1 6 8 8 2 1 1 1 a a a q a q a a q a a q a q a a a a See JOURNAL BEARING section for oversize & under-size parts - page 57 See PISTON RING section for oversize parts - page 60 See GASKET section Schwitzer - 6/14/2007 - 22 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 23 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer 3LM Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description Journal bearing Piston ring, t/end Thrust bearing Flinger sleeve Oil deflector Piston ring, c/end O ring, s/plate Insert Retaining ring, insert Locknut, shaft Bolt, c/end Clamp, t/end Bolt, t/end Clamp, t/end Gasket, backplate Gasket, oil inlet Gasket, oil outlet Gasket, turbine inlet S76 TI Qty/ TI Kit no. TI Kit no. Part no. Turbo 7-C-0670 7-C-1864 8-C-0068 8-B-0395 8-C-0067 8-C-0066 8-C-1649 8-B-0064 8-B-0077 8-A-0164 8-C-0069 8-B-0062 8-A-0697 8 A 0697 8-A-0271 1 1 1 1 1 1 1 1 1 1 4 8 4 2 1 1 1 1 a a a a q a a q q a q q q q a a a a a a a q q a a q q a q q q q a a a a See JOURNAL BEARING section for oversize & under-size parts - page 59 See PISTON RING section for oversize parts - page 58 See GASKET section Schwitzer - 11/11/2008 - 24 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 25 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer HT3B Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 Description Journal bearing Oil control sleeve Retaining ring, j/brg. Piston ring, t/end Thrust collar Thrust ring Thrust spacer Thrust bearing Oil deflector O ring, s/plate Oil slinger Piston ring, c/end Oil seal plate Retaining ring, s/plate Locknut, shaft Lockwasher, c/end Locknut, V band Gasket, oil inlet Gasket, oil outlet 4LHR TI Qty/ TI Kit no. Part no. Turbo 7-B-0645 7-B-0981 Note (i) Note (ii) 8-B-0076 2 a a 8-B-0396 1 q a 8-B-0517 4 a a 8-B-0387 2 a a 8-B-0099 1 a q 8-B-0052 1 q a 8-B-0982 1 q a 8-B-0087 1 a a 8-B-0979 1 q a 8-B-0064 1 a a 8-B-0098 1 a a 8-B-0527 1 a a 8-B-0980 1 q a 8-B-0047 1 q q 8-B-0397 1 q a 8-B-0096 10 q q 8-B-0523 2 q a 8-A-0696 1 a a 8-B-3119 1 a a Note (I) HT3B (ii) 4LHR See JOURNAL BEARING section for oversize & under-size parts - page 26 See PISTON RING section for oversize parts - page 32 See GASKET section Schwitzer - 6/14/2007 - 26 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 27 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S3 Item no. 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description S3A S81 TI Qty/ TI Kit no. Part no. Turbo 7-C-3645 Journal bearing 8-C-2094 Piston ring,t/end 8-C-1726 Piston ring,t/end S81 only 8-B-0387 Spring clamp Thrust ring S3A only 8-C-1728 Thrust bearing S3A only 8-C-1727 Spacer sleeve Oil deflector Flinger Piston ring, c/end 8-C-1649 Seal ring, insert S3A ,S81 8-B-0064 Insert Retaining ring, insert Locknut, l/h thread 8-A-0164 Locknut, v band O ring, brg.hsg/c.hsg. Gasket, oil inlet 8-C-3413 Gasket, oil outlet 8-C-1348 Gasket, oil outlet 8-B-0063 Gasket, oil outlet 8-C-3412 Gasket, t/inlet 8-C-3417 1 1 1 1 2 1 1 1 1 1 1 1 1 q 1 1 1 1 1 1 a a a q a a q q q a a q q a q q a a a a a See JOURNAL BEARING section for oversize & under-size parts - page 60 See PISTON RING section for oversize parts - page 62 See GASKET section Schwitzer - 6/14/2007 - 28 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 29 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S3B Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 Description Journal bearing Retaining ring, jnl/brg. Piston ring,t/end Speed control washer Thrust washer Thrust bearing Spacer sleeve Oil deflector Flinger Piston ring, c/end Seal ring, brg/hsg Insert Retaining ring, insert Locknut, l/h thread Locknut, l/h thread O ring, brg.hsg/c.hsg Locknut, V band TI Qty/ TI Kit no. Part no. Turbo 7-C-1733 7-C-3513 8-C-1216 8-C-1729 8-C-1726 8-C-1731 8-C-1728 8-C-3770 8-C-1649 8-B-0064 8-B-0077 8-A-0164 8-C-2986 8-C-2985 8-D-3503 2 4 1 2 2 1 1 1 1 1 1 a a a a a a q q q a a 1 1 1 1 2 q a a a a a a a a a a a a a a q a See JOURNAL BEARING section for oversize & under-size parts - page 61 See PISTON RING section for oversize parts - page 62 See GASKET section Schwitzer - 6/14/2007 - 30 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 31 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer 4LE Item no. 1 2 3 4 4 10 10 5 6 7 8 9 10 11 11 12 12 13 14 15 15 16 4LF 4LG 4LGK 4LGZ TI Part no. TI Qty/ Part no. Turbo 7-B-0642 7-C-1830 7-C-0787 7-C-0815 Note (i) Note (ii) Note (iii) Note (iv) Journal bearing 8-B-0076 1 a a a a Oil control sleeve 8-B-0396 1 a a a a Retaining ring, j/brg. 8-B-0517 4 a a a a Piston ring, t/end, step bor 8-B-0387 1 a a a a Piston ring, t/end,smooth bo 8-B-0391 2 q a a a Piston ring, t/end 8-B-0527 1/2 q a q q Piston ring, t/end 8-B-0387 1 q q a a Thrust ring 8-B-0052 1 a a a q Thrust bearing 8-B-0088 1 q a a a Thrust spacer 8-B-0982 1 q q q q Oil slinger 8-B-1584 1 a q q q Piston ring, c/end 8-B-0391 2 q q q q O ring, s/plate 8-B-0064 1 a a a a Retaining ring, s/plate 8-B-0077 1 a q q q Retaining ring, s/plate 8-B-0047 1 q q a q Locknut, shaft 8-B-0397 1 a a a q Locknut, shaft 8-B-2867 1 q q q q O ring, c/hsg 8-B-0390 1 q a a q Bolt, c/end 8-A-0169 10 q q q q Lockwasher, c/end 8-B-0096 10 q q q q Lockwasher, c/end 8-B-0521 10 a q q q Locknut, V band 8-B-0523 2 a q a a Lockplate, t/end 8-B-0418 4 a q q q Bolt, t/end 8-A-0172 10 q q q q Gasket, oil inlet 8-C-3415 1 q q a a Gasket, oil outlet 8-A-0697 1 q q a a Gasket, turbine inlet 8-C-3419 1 q q a a Description Note (i) 4LGK (ii) 4L, 4LE, 4LF, 4LG, 4LGK, 4LGZ (iii) 4LE, 4LY & 4MF (iv) 4LE & 4LF See JOURNAL BEARING section for oversize & under-size parts - page 63 See PISTON RING section for oversize parts - page 64 See GASKET section Schwitzer - 6/14/2007 - 32 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 33 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S4 Item no. 1 2 3 4 5 5 6 7 7 8 9 10 11 12 13 14 15 16 Description Journal bearing Retaining ring Piston ring, t/end Speed control washer Thrust ring S4D only Thrust ring S4 only Thrust bearing S4D only Spacer sleeve S4D only Spacer sleeve S4 only Oil deflector Screw, oil deflector Flinger sleeve Piston ring, c/end O ring, s/plate S4D only Insert Retaining ring, insert Locknut, shaft S4D only Locknut, V band S4D TI Qty/ TI Kit no. Part no. Turbo 7-C-3515 8-C-1217 8-A-0137 8-C-1726 8-C-1230 8-B-0052 8-C-1367 8-B-0088 8-B-0982 8-C-1366 8-C-1351 8-B-0064 8-B-0077 8-B-0397 - 2 4 2 2 2 2 1 1 1 1 2 1 2 1 1 1 1 2 S4D ONLY a a a a a q a a q q q q a a q a a q See JOURNAL BEARING section for oversize & under-size parts - page 64 See PISTON RING section for oversize parts - page 65 See GASKET section Schwitzer - 6/14/2007 - 34 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 35 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S4T Item no. 1 2 3 4 5 6 7 7 8 10 11 12 14 15 16 Description S500 TI Qty/ TI Kit no. Part no. Turbo n/a Journal bearing 8-B-0045 Retaining ring, jnl. brg. Piston ring, t/end S4T only 8-C-1726 Washer, speed control Thrust ring S4T only 8-B-0052 Thrust bearing Spacer sleeve S500 Flinger sleeve S4T only 8-C-1584 Oil deflector Spacer Piston ring, c/end S4T only8-C-1351 O ring, s/plate 8-B-0064 Retaining ring,insert S500 8-B-0077 Locknut, shaft S4T only 8-B-0397 Locknut, V band S4T only 8-B-0523 2 4 2 2 1 1 1 1 1 1 2 1 1 1 2 a q a q q a q a q q a a q a q See JOURNAL BEARING section for oversize & under-size parts - page 62 See PISTON RING section for oversize parts - page 65 See GASKET section Schwitzer - 6/14/2007 - 36 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. S200 This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 6/14/2007 - 37 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S200 Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 3 Description Journal bearing Retaining ring, jnl/brg. Piston ring,t/end Thrust sleeve Thrust bearing Oil deflector Flinger sleeve Piston ring, c/end O Ring, insert Retaining ring, insert Locknut, shaft, l/h O Ring, c/hsg, 120 mm Bolt, c/end, hex. Capscrew & lockwasher TI Qty/ TI Kit no. Part no. Turbo 7-C-3478 8-C-3479 8-C-1379 8-C-2992 8-C-3480 8-C-3481 8-C-2990 8-C-1246 8-C-3482 8-C-3483 8-C-3485 7-C-3484 2 4 1 1 1 1 1 1 1 1 1 1 4 6 a a a a a q q a a q a a a a See JOURNAL BEARING section for oversize & under-size parts - page 65 See PISTON RING section for oversize parts - page 67 See GASKET section Schwitzer - 7/15/2008 - 38 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. S300 This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 7/15/2008 - 39 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S300 Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 Description Journal bearing Retaining ring, jnl/brg. Piston ring,t/end Not used Not used Thrust bearing Thrust sleeve Oil deflector Flinger sleeve Piston ring,t/end Not used Insert Retaining ring, insert Locknut, shaft, l/h O ring, c/hsg, 142 mm O ring, c/hsg, 165 mm Not used Bolt, c/end, hex. Capscrew & lockwasher TI Qty/ TI Kit no. Part no. Turbo 7-C-3486 8-C-3385 8-C-3487 8-C-2993 8-C-3489 8-C-3488 8-C-3477 2 4 1 a a a 1 1 1 1 1 a a q q a 8-C-3490 8-C-3492 8-C-3493 1 1 1 1 1 a a a 8-C-3485 7-C-3491 6 8 a a See JOURNAL BEARING section for oversize & under-size parts - page 66 See PISTON RING section for oversize parts - page 68 See GASKET section Schwitzer - 7/15/2008 - 40 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. S400 This illustration is intended only as a guide.The actual part or assembly may vary from one model to another. Schwitzer - 7/15/2008 - 41 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers. SERVICE KIT - Schwitzer S400 Item no. Description 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 Journal bearing Retaining ring, jnl/brg. Piston ring, t/e, S400 only Piston ring, t/e Not used Not used Thrust bearing Thrust sleeve Oil deflector Flinger sleeve Piston ring, c/end O Ring, insert Insert Retaining ring, insert Locknut, shaft, l/h O ring, c/hsg. S410 TI Qty/ TI Kit no. Part no. Turbo 7-C-3494 8-C-3496 8-C-3495 8-C-3504 8-C-3497 8-C-3499 8-C-3498 8-C-3500 8-C-3501 8-C-3502 2 4 2 1 a a a a 1 1 1 1 1 1 1 1 1 a a q q a a a q See JOURNAL BEARING section for oversize & under-size parts - page 67 See PISTON RING section for oversize parts - page 69 See GASKET section Schwitzer - 7/15/2008 - 42 All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers.
Thrust Bearing Screws
(Item 58)
