Think FIBERGLASS First For Windows That Last!

Transcription

Think FIBERGLASS First For Windows That Last!
Superior | Slim Modern Frames | Spectacular Views
THE GREENEST
OF ALL
Accurate Dorwin windows are
easy on the environment with
more LEED (Leadership in
Energy and Design) focused
architects and builders turning
to fiberglass windows than any
other style. Unlike some
products, Accurate Dorwin
fiberglass windows are made
tough and last longer than
others in the industry. This
means fewer old windows lying
around in landfills. Even the
manufacturing process is a
step ahead with systems using
less energy to create the
company’s innovative frame
material. Altogether, Accurate
Dorwin windows are among
the greenest ways to view the
outdoors, an attribute that
comes with the assurance of
testing by the National
Fenestration Rating Council.
PROFILE & HISTORY
1959
Accurate Dorwin Co. (Dorwin Industries), a
leader in the fenestration industry has been
in the business of making the finest quality
and highest energy rated windows and
doors since 1952. Well established in Central
Canada, Accurate Dorwin Co. is dedicated
to providing exceptional customer service to
all residential and commercial customers
throughout North America.
1983
In 1983, Dorwin Industries of Winnipeg
introduced the first fiberglass window to the
world. The idea evolved from a simple
concept of using a composite material that
is thermally superior to steel, wood, vinyl
aluminum, and other materials. It was a
revolutionary idea that proved to be a
challenge. Nothing existed to fabricate the
required window profiles. As a result, Dorwin
Industries developed a new manufacturing
process now known as “pultrusion”.
Pultrusion involves saturating parallel strands
of glass fibers with resin and pulling it through
a heated die. The result is a pultruded
fiberglass profile.
• Fiberglass is paintable, stronger than vinyl,
more weather-resistant than wood, and
less thermally conductive than steel and
aluminum.
• It has a low thermal expansion and
contraction coefficient similar to glass
making it the ideal frame for most high
performance IG units.
• Fiberglass is a strong frame material ideal
to handle heavier dualpane and tripane
IG units.
• Fiberglass frame system has narrower
sightlines offering a higher ratio of glass
area (daylight) to frame area than most
conventional frame materials.
1.888.982.4640 | www.accuratedorwin.com
Dorwin Industries pioneered and developed
a system that combines the most
dimensionally stable window frame material
with foam insulation and high performance
IG units. This system is what Accurate Dorwin
Co. now proudly calls, “The Fiberglass
Advantage”.
2006
Philosophy
“A Company That Service Built”
With over 60 years experience and a
reputation for offering the best product,
Accurate Dorwin backs every product sold
with the very best customer service.
Customer satisfaction is a priority and
Accurate Dorwin is committed to delivering
the very best service.
Commitment
Accurate Dorwin is committed to being the
leader in the fenestration industry and will
continue to adapt to the demands of
today’s
residential
and
commercial
customers. To the consumer, Accurate
Dorwin is committed to providing you the
very best product, service, and warranty out
there. To the design community, builders,
and other professionals, Accurate Dorwin is
committed to providing you the right
product for the right application and
continues to offer unparalleled technical
support.
Accurate Dorwin is fully committed to a
continued product development in order to
meet the design requirements of today’s
projects. Accurate Dorwin will make
fiberglass frame the material of the present
and an exciting alternative to metal, wood,
vinyl, and aluminum frames.
3
ENVIRONMENTAL ASSESSMENT
OF FIBERGLASS WINDOWS
The environmental impacts of windows were studied as part of the design process for the
Waterloo Region Green Home. There were eight environmental factors that were considered
when the decision was made to install windows with pultruded fiberglass frames and a high
efficiency glazing system. A comparison to aluminum-clad and vinyl-high performance windows
was made.
4
www.accuratedorwin.com | 1.888.982.4640
Materials Used
Fiberglass for window frames is made of 65 to
85% glass fibers and 15 to 35% resin. Silica
sand is melted and spun into the glass fibers.
The resin is thermoset polyester, which is a
petroleum-based alkyd containing styrene,
glycols and acids. The insulation in the
frames is expanded polystyrene. The
pultruded lineals were produced by
Omniglass of Winnipeg using fiberglass and
resin from Owens Corning. The windows were
manufactured and assembled by Accurate
Dorwin of Winnipeg. The high-performance
glazing units consisted of three panes of
glass with LOF Energy Advantage Low-E
coatings on surfaces 2 and 5, lowconductivity silicone Super Spacer from
Edgetech and two argon gas fills.
Aluminum-clad wood framed windows
require aluminum sheeting and high quality
clear lumber. Some finger-jointed lumber is
used in interior components that are not
visible once the window is installed. Vinyl
windows are made from polyvinyl chloride
and often contain steel reinforcement.
Resource Depletion
The raw material reserves for silica sand are
very large at present and are not expected
to be exhausted. Quality control concerns in
the production of glass fiber presently
preclude the use of recycled fiber and
waste is not recycled into the process
though these options are being investigated.
In-plant waste resins for fiber glass are reused and re-blended. The raw material
reserves are based on the limits of petroleum
products. The amount of petroleum is
relatively small and contributes to a durable
product that has a long life and energy
efficiency not available from other materials.
The polystyrene insulation is a petroleum
product and as mentioned above, has
reserves based on the limits of petroleum.
Again, a durable insulation is produced that
has advantages in energy use reduction
during the life of the window compared to
other products. Vinyl windows require a large
quantity of polyvinyl chloride resins which use
petroleum as feed stock. Wood windows
require clear heartwood for visible
components placing a strain on old growth
forests.
Emissions During Manufacture
Glass fiber production is said to be a closed
process with few emissions escaping into the
environment. Resin manufacture is also said
to be a closed process with very few
emissions in the environment. There is a
chemical risk from the resins but it is less than
that of PVC production. Expanded
polystyrene is not produced in a closed
process and some of the pentane blowing
agent and other volatile compounds are
able to escape.
The production of PVC releases petroleum
by product into the atmosphere. The
production of aluminum releases two fluorine
gasses with potent greenhouse warming
potential.
Embodied Energy
The energy intensity (18 MJ/kg) of fiberglass is
lower than that of PVC (26 MJ/kg). Fiberglass
frames are slightly heavier than vinyl but
have a lower embodied energy. Wood
windows have a lower embodied energy
but aluminum cladding increases energy
requirements significantly.
All of the components for fiberglass windows
are manufactured in North America so that
transportation energy is relatively low as
shipping distances are short. Fiberglass
window frames are extremely durable and
are expected to last the life of the house. This
5
means that embodied energy must only be
dealt with once rather than several times, as
would be the case if the windows required
replacement (as would probably occur with
other materials).
A standard double-glazed wood window
has an energy rating of -33 W/m2. The
highest triple-glazed wood window rating is 5 W/m2. Vinyl windows have similar ratings as
wood.
Energy Used During the
Life of the Windows
Ozone Depletion
There are no ozone-depleting chemicals
used in the manufacture of the fiberglass
windows. The expanded polystyrene
however, uses pentane (approximately 7%
by volume) as a blowing agent (a
greenhouse gas).
The space heating energy consumed as a
result of the windows is much greater than
the energy required to construct the
windows.
With fiberglass windows, the space heating
energy is actually an energy gain on
average. The Accurate Dorwin windows
used at the Green Home have an energy
rating (ER) of 48 for the operable versions.
This means that averaged over the four
cardinal directions and across the Canadian
climate, they gain 7.2 watts per square
meter of window over the heating season.
Accurate Dorwin Windows are listed for the
Ontario Hydro incentive program that have
a positive energy rating for an operable
model.
Environment Emissions During
the Life of the Product
Polyesters and keytones will off-gas for some
time after fiberglass is manufactured. The
painted finish on the surface of the frames is
however expected to reduce the rate of
emission. Vinyl windows and to a lesser
extent, wood windows, also have emissions.
Table 1 - Environmental Comparison of Windows
Materials
Used
Resource Manufacturing
Depletion
Emissions
Embodied
Energy
Energy Used
Ozone
During Life Depletion
Emissions
During Life
Disposal
Fiberglass
Glass fiber
and resin
L
L
M
L
L
M
M
Aluminum
Clad Wood
Wood and
Aluminum
M
M
M
M
L
L
M
Polyvinyl
Chloride
H
H
M
M
L
L
M
Vinyl
Note: L = Low; M = Medium; H = High Environmental Impact
6
Material
Float Glass
Fiberglass
Steel
Aluminum
Vinyl (P.V.C.)
.400
.320
.240
.160
.080
0
.080
.160
Summary
Table 1 summarizes how the three window frame materials compare in addressing the eight
environmental issues. Energy use was considered to be the most important environmental factor.
From this analysis, it was found that fiberglass windows have the lowest overall environmental
impact. The energy efficiency and long life of fiberglass windows significantly reduces the need
for purchased energy, which means that their impacts on resource depletion and embodied
energy are also limited. The high energy use and to a lesser extent the emissions during
production of aluminum-clad, wood and vinyl windows were the principal factors working against
these products.
Enermodal Engineering Limited
7
The Fiberglass Advantage
Strength – Pultruded Fiberglass is the strongest of all window materials. Fiberglass is eight times
stronger than PVC, over three times stronger than wood composites and 20% stronger than
aluminium.
Stability – Pultruded fiberglass frames exhibit minimal expansion and contraction in extreme
temperature changes when compared to other window frame materials. Fiberglass and glass
have similar rates of expansion and contraction which results in superior weather seal
performance over a wide range of seasonal temperatures changes, smooth window operation
and consistent alignment of the sash and frame. As a comparison PVC expands and contracts
at a rate eight times of glass.
Energy Efficiency – Pultruded Fiberglass window frames have a much lower thermal
conductivity than other materials such as aluminium. This combined with insulated frames and
sashes results in some of the most energy efficient windows in the world.
Durability – Pultruded fiberglass window frames will not bend, warp, crack, dent, rust or
corrode. Fiberglass will not corrode in coastal applications as it is impervious to saltwater.
Environmentally Friendly
– Pultruded Fiberglass window frames combined with high
efficiency insulating glass can help reduce the world’s energy consumption. Fiberglass is made
from silica sand an abundant natural resource. There is less embodied energy in fiberglass as
compared to PVC which requires gas and petrol-chemicals. Aluminium requires large amounts of
electricity and natural gas to produce and wood consumes large amounts of slow growing trees.
8
LEADERSHIP IN ENERGY
AND ENVIRONMENTAL DESIGN
(LEED)
LEED is an internationally recognized third party green building certi-fication system
that encourages and accelerates the adaptation of sustainable green building
practices. When you design and specify Accurate Dorwin Fiberglass windows LEED
points can be earned in the following key areas:
Energy Efficiency
• Optimizing Energy
Performance
• High Performance
Windows
Indoor Environmental
Quality
• Increased Ventilation
Material Selection
• Regional Content
• Thermal Comfort
• Environmentally
preferable Products
• Daylight and views
• Sustainable Materials
9
Awning, Casement
ADC 325 Series
Standard Features
• Sealant: Low VOC (environmentally friendly).
• Standard 3 1/4” closed-back insulated frame. Standard
insulated close-back sash.
• Available in standard white, custom,
split-finish, and/or veneer wrap (oak, fir, others).
Awning
Projected window hinged at the
top is the only window style that
keeps the rain out while allowing
fresh air in.
• Standard rotogear operators with standard collapsible
handles.
• Standard multi-point locks where applicable (19” nominal
height).
• Standard concealed hinges – tamper resistant for added
security.
• Sash unhooks for interior service if necessary.
• Paint & Finish: Advanced polyurethane baked on or
electrostatically applied finish.
• Frame & Sash: Pultruded 0.090” nominal wall fiberglass (52-62%
glass fibers + 35-45% resin + 7-13% filler).
• Insect Screen: Standard full screen. Removable stamped
aluminum frame with black fiberglass mesh.
• Insulation: Expanded Poly Styrene (EPS) Type 1.
• Weatherseal: Santoprene Rubber Seals (main, secondary,
spline), glazing tape, dust.
• Frame and corners are mechanically secured and joined at
45 angle.
• Exterior glazed window with aluminum stops.
Casement
Projected window hinged at the
jamb (opening up to 90
degrees) which provides the
most optimal air ventilation.
10
• Please contact an Accurate Dorwin Window representative
for sizing options.
Fixed Sash, Picture
ADC 325 Series
Standard Features
• Exterior glazed window with aluminum stops (fixed sash).
• Interior glazed window with fiberglass stops (picture window).
Picture
Narrow profile frame is the
perfect choice to maximize
glass area for optimal viewing
and maximum light needs.
spline), glazing tape, dust seal (fixed sash).
45 angle.
ADC 450 Series Picture Window
Standard Features
• Standard 4 1/2” open-back insulated frame.
• Exterior glazed window with aluminum stops (fixed sash).
• Interior glazed window with fiberglass stops (picture window).
Fixed Sash
Wider frame profile matches
that of the awning or casement
which allows for consistent sight
lines.
spline), glazing tape, dust seal (fixed sash).
45 angle.
11
Single Hung, Single Horizontal Slider
ADC 325 Series
Standard Features
• Available in standard white, custom, split-finish.
Single Hung
Fixed top lite with an interior tilt
and slide bottom sash which
can be removed.
• Insect Screen: Standard full screen. Removable stamped
aluminum frame with black fiberglass mesh.
spline), glazing tape, dust seal.
• Heavy-duty block and tackle spring balancers, die cast
camlock, and tilt latches.
45 angle.
• Available night latch and/or limit device for added security.
Single Horizontal Slider
Fixed lite (exterior) with “tilt &
slide” sash (interior). Left or right
handing.
12
Air Conditioning
ADC 325 Series
Standard Features
• Standard 3 1/4” open-back insulated frame. Standard noninsulated close-back sash.
• Exterior glazed window with aluminum stops.
Air Conditioning Unit
Picture frame with removable
single hung sash.
• Sash unlock with heavy-duty custodial lock.
• Sash unhooks for interior service if necessary.
spline), glazing tape, dust seal.
45 angle.
• Optional second sash with IG Unit for winter use.
Hopper
ADC 325 Series
Standard Features
• Custom sizes up to 48”w x 32”h [1219mm x 813mm] or 80 UI.
Hopper
Picture frame with removable
operator sash.
• Standard 3 1/4” close-back insulated frame. Standard noninsulated close-back sash.
• Available with dualpane, tripane, or dual-plus (plexiglass) IG
Units.
• Available in standard white, custom, and split-finish.
• Heavy-duty hinges and die cast camlock.
• Exterior glazed with aluminum stops.
• Removable sash for interior service and maintenance.
13
Bays, Bows, Special Shapes
ADC 325 Series
Standard Features
• Configurations that suit the designer and/or customer’s
intended design.
• Custom sizes as permitted by governing standards and/or
building codes.
• Bays and bows head and seat available in oak, fir, and other
materials. Custom fabricated to fit into a new or existing rough
opening (RO).
• Circular, round-top, half-round, quarter-round, and other
curved window with segmented frames.
• Design possibilities on custom shapes are limitless, contact
your Accurate Dorwin representative for more information.
Patio Door
ADC 325 Series
Standard Features
• Q-Lon and Fin Seal weather stripping.
Patio Door
• Mortise keyed steel cylinder lock, Keepe’s steel handles and
lockplates.
• Sliding panels equiped with two steel tandem, sealed ball
bearings with adjustable rollers.
14
Colour Options
In addition to the standard white and
thirteen optional colours or we can
match any pantone colour.
glacier white
coastal blue
vanilla
black mica
sage green
slate grey
midnight blue
natural cream
cayenne red
sandstorm
boreal green
silver mist
metallic
medium mocha
espresso
Single Colour
Same colour on the inside and outside of
the window.
Multicolour
Brickmold and window frames different
colours.
Split Finish
Different colours applied to the interior
and exterior of the frames.
Real Wood Veneer (interior only)
Fir, oak and other species available upon
request. Unfinished.
wood veneer
15
ADC 325 Series
Insulating Glass (IG) Units:
• NFRC Certified / EnergyStar Qualified, IGMAC Certified
Suppliers: AGC, PPG, IG Units available with 3mm – 6mm
depending on design requirements, low-E, argon gas fill,
architectural grade Superspacer, Intercept Ultra Warm
Edge spacer, tinted, reflective, laminated, tempered,
heat strengthened (HS), opaque, spandrel, plexiglass, and
others.
• Available internal grilles (3/8”, 5/8”) and Simulated Divided
Lite (SDL) (3/4” aluminum, 1 1/4” fiberglass).
• In-house IG Units and other third party suppliers are
available.
Accessories:
• Drywall Return: White only (1/2”, 5/8”, 3/4”).
• Jamb Liner / Extension: Stain / Paint Grade Fir, Oak, Pre
finished White.
• Others: Available “twist-on” stainless steel installation clip.
Hardware:
• Color: Standard white or black, faux bronze, brushed
nickel, custom colours available upon request.
• Locks: Standard multi-point (19” nom.) or cam lock.
• Egress: Available on casement windows.
• Motorized: Truth Sentry 2000.
• Rotogears: Truth Encore Series.
• Handles: Collapsible. Optional: Palm Knobs, ADA handles,
Pole, Others.
• Limit Devices: Available on casement, awning, hung, and
slider windows.
Hardware specifications are available
upon request.
Other options are available.
Please call 1.888.982.4640 if you have
any questions.
16
• Night Latches; Available on hung and slider windows.
• Insect Screens: Standard full screen. Removable stamped
aluminum frame with black fiberglass mesh. Other screen
materials are available.
• Stainless Steel Hardware available for coastal
applications.
Optional Brickmould & Accessories
Trimline Brickmould:
• 5/8”, 1”, and 1 3/8” Extension Caps
All-purpose Brickmould:
• 5/8”, 1”, and 1 3/8” Extension Caps.
K-pan Brickmould:
• Designed for super insulated and cavity wall systems.
Aluminum Nailing Fin
•
1 7/8” Extruded Aluminum.
Panning Brickmould
•
3 1/4” Closed-Back Extruded Aluminum.
Custom Brickmoulds Available
• Please consult Accurate Dorwin representative for details.
17
9 " [15] (5/8" Adapter)
16
1" [32]
14
5 " [34]
116
7" [22]
8
1" [13]
2
13
8" [35]
1" [25]
5" [16]
8
1
2" [12]
1" [114]
42
3" [10]
8
5" [16]
8
25" [67]
8
1
16" [1]
Outside Measurement Brickmould
(OSM BM)
1" [32]
14
BM
1" [32]
14
7" [22]
8
FRAME SIZE (FS)
15" [41]
8
15" [24]
16
TRIMLINE BRICKMOULD & OPTIONAL EXTENSION CAPS
TRIMLINE
ROUGH OPENING (RO)
ROUGH OPENING (RO)
9
16" [14]
5" [16]
8
3 " [35]
18
1" [25]
5" [16]
8
1" [83]
34
1
16" [1]
3" [10]
8
(OSM BM)
1" [32]
14
7" [22]
8
1
2" [13]
13" [35]
8
5 " [34]
116
9
16" [14] (5/8" Adapter)
1" [32]
14
FRAME SIZE (FS)
BM ALL-PURPOSE
18
7" [22]
8
1" [32]
14
5" [41]
18
15" [24]
16
ALL-PURPOSE BRICKMOULD & OPTIONAL EXTENSION CAPS
ROUGH OPENING (RO)
211" [68]
16
1
16" [2]
5" [127]
1" [83]
34
1 " [2]
16
1 5 " [33]
16
1 5 " [33]
16
1" [114]
42
411" [119]
16
1 5 " [33]
16
NAILING FLANGE: POSITION 04
3 " [81]
316
1 " [2]
16
FRAME SIZE (FS)
3" [76]
1" [83]
34
1
16" [2]
73
4" [197]
5 " [16]
8
BM
7 " [113]
416
1" [114]
42
(OSM BM)
1 5 " [33]
16
K-PAN BRICKMOULD & OPTIONAL NAILING FLANGE
Note: Designed for super insulated and cavity wall systems.
* NON-STOCK ITEM & CUSTOM FABRICATED. A minimum order is in effect (approx. 2500 +/- ft.)
* Subject to longer lead-time.
* Please call 1.888.982.4640 if you have any questions.
K-PAN
ROUGH OPENING (RO)
(OSM BM)
(OSM BM)
17" [47]
8
5 " [15]
8
FRAME SIZE (FS)
BM
PANNING
ROUGH OPENING (RO)
PANNING BRICKMOULD
1" [83]
34
1" [83]
34
3 5 " [84]
16
1" [165]
62
5" [16]
8
1" [32]
14
FRAME SIZE (FS)
BM
ALUMINUM NAILING FLANGE
ALUMINUM NAILING FLANGE
* NON-STOCK ITEM & CUSTOM FABRICATED. A minimum order is in effect (approx. 2500 +/- ft.)
* Subject to longer lead-time.
* Please call 1.888.982.4640 if you have any questions.
19
325 Series Casement
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.22
4.55
0.4
0.47
65
1.25
0.22
4.55
0.37
0.43
65
28
1.19
0.21
4.76
0.25
0.44
66
SPF 83/Argon with Grills
28
1.19
0.21
4.76
0.22
0.39
66
SPF 84/Argon
39
1.08
0.19
5.26
0.39
0.46
70
39
1.08
0.19
5.26
0.35
0.41
70
SPF 93/Argon
32
0.97
0.17
5.88
0.23
0.39
73
32
0.97
0.17
5.88
0.21
0.35
73
Glass Option
Energy
Rating
U Value
Metric
U Value
Imperial
SPF 73/Argon
36
1.25
36
SPF 83/Argon
Custom glazing option available upon request.
Test Size (IN)
Test Size (mm)
NAFS Rating
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
32 x 68
815 x 1725
Class CW - PG55
<.01 L /s/M2
.03 L /s/M2
A3
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B7
730 (15)
2880 (60)
C5
DP Rating
Water
Wind
DP 100
DP 60
Selection, Performance and Testing
Selection of the appropriate Accurate product to conform to any and all local applicable laws, ordinances, building
codes and safety requirements is the sole responsibility of the Buyer, architect, property owner/and or contractor.
Accurate assumes no responsibility in this regard and makes no warranty with respect to the use and or compliance of
products under applicable laws. Products which exceed the manufacture’s specified size limitations are not covered
under warranty.
The Buyer acknowledges that test results and certifications are for comparison purposes only and indicate design
potential and are for reference only. Actual results and size are installation dependent. In-Service performance and
tests can be significantly different. Accurate Dorwin Inc. cannot be held responsible for information contained herein
that may change or be incorrect at time of specification or purchase without prior verification by the buyer with
Accurate Dorwin Inc. Due to product improvement and other factors, specification and details are subject to change
without notice. To ensure that information contained herein has not become obsolete, please contact Accurate
Dorwin Inc. for any updated information before specification or use. All products specifications are typical and for
reference only.
20
325 Series Awning
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.22
4.55
0.4
0.47
65
1.25
0.22
4.55
0.37
0.43
65
28
1.19
0.21
4.76
0.25
0.44
67
28
1.19
0.21
4.76
0.22
0.39
67
SPF 84/Argon
39
1.08
0.19
5.26
0.39
0.46
70
39
1.08
0.19
5.26
0.35
0.41
70
SPF 93/Argon
32
0.97
0.17
5.88
0.23
0.39
72
32
0.97
0.17
5.88
0.21
0.35
72
Glass Option
Energy
Rating
U Value
Metric
U Value
Imperial
SPF 73/Argon
36
1.25
36
SPF 83/Argon
Test Size (IN)
Test Size (mm)
NAFS Rating
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
54 x 36
1365 x 915
Class CW - PG60
<.01 L /s/M2
.02 L /s/M2
A3
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B7
730 (15)
2880 (60)
C5
DP Rating
Water
Wind
DP 100
DP 60
under warranty.
reference only.
21
325 Series Picture
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.2
5
0.5
0.59
69
1.14
0.2
5
0.45
0.52
69
32
1.14
0.2
5
0.3
0.54
70
32
1.14
0.2
5
0.27
0.48
70
SPF 84/Argon
48
0.91
0.16
6.25
0.48
0.56
75
48
0.91
0.16
6.25
0.43
0.5
75
SPF 93/Argon
39
0.79
0.14
7.14
0.28
0.48
77
39
0.79
0.14
7.14
0.26
0.43
77
Glass Option
Energy
Rating
U Value
Metric
U Value
Imperial
SPF 73/Argon
44
1.14
44
SPF 83/Argon
Test Size (IN)
Test Size (mm)
NAFS Rating
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
72 x 72
1829 x 1829
Class CW - PG60
<.01 L /s/M2
<.01 L /s/M2
Fixed
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B7
730 (15)
2880 (60)
C5
DP Rating
Water
Wind
DP 100
DP 60
under warranty.
reference only.
22
450 Series Picture
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.2
5
0.5
0.59
69
1.14
0.2
5
0.45
0.52
69
32
1.14
0.2
5
0.3
0.54
70
32
1.14
0.2
5
0.27
0.48
70
SPF 84/Argon
48
0.91
0.16
6.25
0.48
0.56
75
48
0.91
0.16
6.25
0.43
0.5
75
SPF 93/Argon
39
0.79
0.14
7.14
0.28
0.48
77
39
0.79
0.14
7.14
0.26
0.43
77
Glass Option
Energy
Rating
U Value
Metric
U Value
Imperial
SPF 73/Argon
44
1.14
44
SPF 83/Argon
Test Size (IN)
Test Size (mm)
NAFS Rating
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
72 x 72
1829 x 1829
Class CW - PG100
<.01 L /s/M2
<.01 L /s/M2
Fixed
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B7
730 (15)
5040 (105)
C5
DP Rating
Water
Wind
DP 100
DP 100
under warranty.
reference only.
23
325 Single Hung
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.24
4.17
0.49
0.57
65
1.36
0.24
4.17
0.39
0.45
66
28
1.31
0.23
4.35
0.29
0.53
66
28
1.31
0.23
4.35
0.24
0.42
66
SPF 84/Argon
42
1.14
0.2
5
0.47
0.55
69
42
1.14
0.2
5
0.37
0.43
69
SPF 93/Argon
30
1.02
0.18
5.56
0.28
0.47
70
30
1.02
0.18
5.56
0.22
0.37
70
Glass Option
Energy
Rating
U Value
Metric
U Value
Imperial
SPF 73/Argon
33
1.36
33
SPF 83/Argon
Test Size (IN)
Test Size (mm)
NAFS Rating
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
55 x 90
1400 x 2300
Class CW - PG45
<.01 L /s/M2
<.01 L /s/M2
A3
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B3
330 (6.89)
2160 (+45)
B3
DP Rating
Water
Wind
DP 45
DP 30
under warranty.
reference only.
24
Patio Door 5000 Series
R Value
Solar
Heat Gain
Coefficient
Visable
Transmittance
Condensation
Resistance
0.23
4.35
0.25
0.44
62
0.25
4
0.23
0.38
62
Glass Option
U Value
Metric
U Value
Imperial
SPF 93/Argon
1.31
1.42
Test Size (IN)
Test Size (mm)
Air Infiltration
Air Exfiltration
Canadian Air
Infiltration Level
95 x 80
2419 x 2019
.35 L /s/M2
.35 L /s/M2
A3
Water Tightness
Water Penetration
Resistence PA (PSF)
Wind Load
Resistance Pa (Psf)
A-440-00
B3
360 (7.5)
3600 (75)
C5
DP Rating
Water
Wind
DP 50
DP 50
under warranty.
reference only.
25
Supply and Install Residential Warranty
Coverage Under this Warranty
1) Accurate Dorwin Inc. (ADI) warrant that certain products identified below will be free from defects in materials and
workmanship from the date of purchase for the time periods described herein. The provisions of this consumer warranty
agreement (hereafter “warranty”, and where “warranty” is issued shall apply to the warranty coverage for that specific
product referred to) apply to Accurate Dorwin manufactured products from and including January 1st, 2015.
2) This warranty is subject to ADI’s standard terms and conditions and all exclusions, limitations, disclaimers etc.
contained herein.
3) This warranty is for the benefit of the Original Consumer (original purchaser of the product and the original owner of
the building in which the Product is installed) if the Product (hereinafter the “Consumer”) when purchased from Accurate
Dorwin, an authorized Accurate Dorwin dealer, distributor, contractor or builder and shall not be transferable from the
Owner subsequent transferee.
Labour – Skilled labour required to replace or repair any defective product or product component is covered by this
warranty for five (5) years following the date of purchase unless otherwise specified. Seasonal adjustments of strikers or
door sweeps caused by seasonal foundation shifting are not covered under warranty. If you are located outside winnipeg,
MB, travel fees will apply.
Fiberglass Screens – Are warranted for ten (10) years against rot, rust or stains under normal residential use. The
warranty does not apply to torn or ripped screens.
Storm Doors – Storm doors are warranted to the original purchaser homeowner to be free from defects in the material
and workmanship for one (1) year after the date of purchase. ADI will not be responsible for installation, repainting, or
refinishing work associated with the replacement of products deemed defective. Glass breakage, torn screens and wind
damage are not covered in this warranty.
ACCUFRAME ™ Fiberglass Windows and Sliding Patio Doors
Sealed Unit Replacement in Frames not Manufactured by Accurate Dorwin – Sealed Unit replacements are
warranted for ten (10) years from the date of purchase. If the Insulated Glass fails ADI will provide a replacement insulated
glass unit at no charge F.O.B. ADI’s manufacturing facility. A failed insulated glass unit is one which develops a significant
obstruction of vision as a result of film formulation caused by dust or moisture in the leaked air space caused by the failure
of hermetic seal. Glass is a construction material, small marks, scratches and spots which are not visible from viewing at a
90 degree angle under normal viewing conditions at a minimum of 10 feet are not considered defects.
Frames – All fiberglass windows and patio doors, under normal use and service, will be free from defects in material and
workmanship for the lifetime of the product to the original purchaser homeowner. The fiberglass is warranted not to
corrode, peel, rot, rust, warp, bow, twist or blister. This warranty is transferable to one succeeding owner of the residence
in which the windows and/or patio doors were originally installed. The warranty period for the second owner is fifteen
(15) years from the original date of installation.
Selection of Product – Selection of the appropriate Accurate Dorwin product to conform to any and all local applicable
laws, ordinances, building codes and safety requirements is the sole responsibility of the architect, property owner/and or
contractor. Accurate Dorwin assumes no responsibility in this regard and makes no warranty with respect to the use and
or compliance with such law. Products which exceed the manufacturer’s specified size limitations are not covered under
this warranty.
ALL WARRANTIES ARE SUBJECT TO THE CONDITIONS, EXCLUSIONS, DISCLAIMERS AND LIMITATIONS THAT ARE SET OUT IN
THIS DOCUMENT.
Warranty Details:
Insulated Glass – Insulated Glass Units, under normal use and service, will not fail for the lifetime of the product to the
original purchaser homeowner. If the insulated glass fails ADI will provide a replacement insulated glass unit at no charge
F.O.B. ADI’s manufacturing facility. A failed insulated glass unit is one which develops a significant obstruction of vision as
a result of film formulation caused by dust or moisture in the leaked air space caused by the failure of hermetic seal. Glass
is a construction material, small marks, scratches and spots which are not visible from viewing at a 90 degree angle under
normal viewing conditions at a minimum of 10 feet are not considered defects. This warranty is transferable to one
succeeding owner of the residence in which the windows were originally installed. The warranty period for the second
owner is fifteen (15) years from the original date of installation.
Hardware – All balancers, rollers locking mechanisms and other hardware used in our windows and patio doors will not
fail under normal use and service for the lifetime of the product to the original purchaser homeowner. All balancers and
locking mechanisms should be lubricated once a year with a silicone type spray. All sliding tracks should be kept free of
dirt and rust.
Colour – The coated surfaces of the windows and patio doors are designed to maintain their original colour
characteristics, however, atmospheric conditions and sun exposure may cause some fading overtime. ADI warrants that
for a period of 15 years from the date of application the coating applied will not crack, pit, peel, blister or suffer nonuniform fading or discoloration (non-uniform fading discoloration resulting from unequal exposure of surfaces to the sun
and elements is not covered by this warranty).
Optional Veneer Interior – The optional veneer interior surfaces of ADI’s windows and patio doors must be painted or
stained immediately after installation. After sealing, the veneer is very resilient, however, it is subject to permanent
damage from moisture and mildew until properly sealed. Failure to paint or stain and seal the veneer interior immediately
after installation will nullify this warranty.
Condensation – Condensation on the interior of windows and doors is a natural result of excessive moisture in the air.
Condensation does not indicate a defective product or faulty installation and is not covered under warranty. Additional
information on the causes and cures is available from Accurate Dorwin upon request.
Labour – Skilled labour required to replace or repair any defective product or product component is covered by this
warranty for five (5) years following the date of purchase unless otherwise specified. If you are located outside winnipeg,
MB, travel fees will apply.
ACCUFRAME ™ Fiberglass Door
Fiberglass Door Slabs – Accurate Dorwin shall provide a 25 year warranty to the original purchaser homeowner against
warping and delaminating of fiberglass slabs provided that the door slab is sealed on all surfaces. Within that time period
ADI will at its sole discretion, replace or repair the defective product at no charge. ADI will not be responsible for
installation or refinishing work associated with the replacement of the products deemed defective. It shall be the
purchaser’s responsibility to complete the replacement of the items deemed defective, unless the consumer chooses to
use ADI’s services for which there will be an applicable charge. Door warpage is considered a defect when the deflection
exceeds 8mm providing that the door is manufactured with standard lock and hinge preparation. Action on claims for
bow, twist, or warp may be deferred at Accurate Dorwin’s option for a period not to exceed twelve (12) months after
installation to permit the door in question to acclimate to temperature and humidity conditions. This warranty is
transferable to one succeeding owner of the residence in which the doors were originally installed. The warranty period
for the second owner is fifteen (15) years from the original date of installation.
During winter months door panels can bow due to extreme temperature variations between the interior and exterior of
the door. This is known as “thermal bow” and is not a sign of a defective product.
Exterior Door Glass – ADI will provide to the original purchaser homeowner a limited warranty for ten (10) years from
the date of purchase on all decorative, obscure, clear and Low E doorlites as well as patio door glass-sealed units.
Door Frame - All fiberglass door frames, under normal use and service, will be free from defects in material
workmanship for the lifetime of the product to the original purchaser homeowner. This warranty is transferable to one
succeeding owner of the residence in which the doors were originally installed. The warranty period for the second owner
is fifteen (15) years from the original date of installation.
Hardware - ADI will provide to the original purchaser homeowner a limited warranty for ten (10) years from the date of
purchase on hardware purchased from ADI.
Paint/Stain Finish - ADI warrants that for a period of 10 years from the date of application the coating applied will not
crack, pit, peel, blister or suffer non-uniform fading discoloration (non-uniform fading discoloration resulting from
unequal exposure of surfaces to the sun and elements is not covered by this warranty).
26
Process for Warranty Claims
1) Upon discovery of a defective product, contact Accurate Dorwin directly;
Mail: Accurate Dorwin Inc., 1535 Seel Ave., Winnipeg, MB R3T 1C6
Email: [email protected]
2) You will be required to provide the following information to make a claim:
a. Description of defective part and the date the defect first appeared
b. Proof of Purchase
c. Full name, address and phone number of original consumer
3) After submitting the claim, Accurate Dorwin will review the claim and contact the consumer within a reasonable
time.
4) Accurate Dorwin shall have the right to charge a reasonable fee to cover its expenses in the event that an on-site
inspection is required or requested by the consumer. Accurate Dorwin shall reimburse the consumer for the full amount of
the fee if the claim is determined to be covered by this warranty upon investigation of defect. After determining the
nature and the extent of any product failure, if required under the warranty, a replacement will be supplied, or the defect
repaired at Accurate Dorwin’s option.
Conditions, Exclusions, Disclaimers and Limitations
1) No representative of Accurate Dorwin shall have the authority to change, modify or expand this warranty and any
purported modification to this warranty shall be no force and effect.
2) The original warranty shall not be extended by any such repair or replacement, but the original warranty shall
continue in effect and be applicable to the repaired or replaced part(s).
3) Accurate Dorwin reserves the right to discontinue or modify any product line. In the unlikely event that any of the
original parts or components are no longer available, Accurate Dorwin will substitute parts or components of comparable
quality.
4) Accurate Dorwin does not provide a warranty for products that have not been paid for in full.
5) This warranty covers only those material defects as specified herein and does not include defects or damage caused
by accidents, fire, flood, hail or other Acts of God, extraordinary impact, vandalism, riot or civil disorder, misuse, mildew,
damage caused by pressure washing, modifications not performed by Accurate Dorwin, abuse, localized heat which
causes excess temperature differentials, harmful fumes, vapors or chemical pollutants in the atmosphere, building
settlement, structural failure of walls or foundations or failure of product on account of building construction or design.
6) This warranty is made in lieu of all other expressed or implied warranties and extends only to the original consumer.
In no event shall Accurate Dorwin be liable for any incidental or consequential damages of any kind, or resulting from any
defects, or for any delays in performance of this warranty due to circumstances beyond its control.
7) In no event will Accurate Dorwin be liable for consequential or incidental damages. In no event will Accurate Dorwin’s
liability exceed the price paid for the affected product or component.
Certifications and Ratings – Many Accurate Dorwin products are labeled with National Fenestration Rating Council
(NFRC) ratings. NFRC ratings are based on a combination of computer simulations and physical testing of product samples.
Certifications and ratings typically apply to single products only; however certain factory-mulled or combined product
configurations may also be certified. Performance of individual products may vary and will change over time, depending
upon the conditions of use. NFRC ratings are not performance warranties. For details on NFRC Energy Performance ratings,
go to www.NFRC.org.
Registration of Warranty – In order for you to be eligible for coverage under this warranty, the attached warranty
registration form must be completed, signed and returned to Accurate Dorwin within thirty (30) days after completion of
the installation.
Transfer of warranty – The above warranties are extended only to the original purchaser. This warranty is transferable
to one succeeding owner of the residence in which the windows and doors were originally installed. The warranty period
for the second owner is fifteen (15) years from the original purchase date. Completing the attached warranty Transfer
Form and returning it to Accurate Dorwin, along with a check payable to Accurate Dorwin in the amount of $75.00 CAD,
within sixty (60) days of the date that ownership is transferred, can transfer this warranty. Failure to so notify Accurate
Dorwin will relieve Accurate Dorwin of any future obligations under this warranty.
Note: Subject to change. Consult Accurate Dorwin at time of ordering.
Supply Only Warranty
Coverage Under this Warranty
1) Accurate Dorwin Inc. (ADI) warrant that certain products identified below will be free from defects in materials and
workmanship from the date of purchase for the time periods described herein. The provisions of this consumer warranty
agreement (hereafter “warranty”, and where “warranty” is issued shall apply to the warranty coverage for that specific
product referred to) apply to Accurate Dorwin manufactured products from and including January 1st, 2015.
2) This warranty is subject to ADI’s standard terms and conditions and all exclusions, limitations, disclaimers etc.
contained herein.
3) This warranty is for the benefit of the Original Consumer (original purchaser of the product and the original owner of
the building in which the Product is installed) if the Product (hereinafter the “Consumer”) when purchased from Accurate
Dorwin, an authorized Accurate Dorwin dealer, distributor, contractor or builder and shall not be transferable from the
Owner subsequent transferee.
ALL WARRANTIES ARE SUBJECT TO THE CONDITIONS, EXCLUSIONS, DISCLAIMERS AND LIMITATIONS THAT ARE SET OUT IN
THIS DOCUMENT.
Warranty Details:
ACCUFRAME ™ Fiberglass Windows and Sliding Patio Doors
Frames – All fiberglass windows and patio doors, under normal use and service, will be free from defects in material and
workmanship for the lifetime of the product to the original purchaser homeowner. The fiberglass is warranted not to
corrode, peel, rot, rust, warp, bow, twist or blister. This warranty is transferable to one succeeding owner of the residence
in which the windows and/or patio doors were originally installed. The warranty period for the second owner is fifteen
(15) years from the original date of installation.
Insulated Glass – Insulated Glass Units, under normal use and service, will not fail for the lifetime of the product to the
original purchaser homeowner. If the insulated glass fails ADI will provide a replacement insulated glass unit at no charge
F.O.B. ADI’s manufacturing facility. A failed insulated glass unit is one which develops a significant obstruction of vision as
a result of film formulation caused by dust or moisture in the leaked air space caused by the failure of hermetic seal. Glass
is a construction material, small marks, scratches and spots which are not visible from viewing at a 90 degree angle under
normal viewing conditions at a minimum of 10 feet are not considered defects. This warranty is transferable to one
succeeding owner of the residence in which the windows were originally installed. The warranty period for the second
owner is fifteen (15) years from the original date of installation.
Hardware – All balancers, rollers locking mechanisms and other hardware used in our windows and patio doors will not
fail under normal use and service for the lifetime of the product to the original purchaser homeowner. Products installed
in corrosive or saltwater environments must be installed with our stainless steel hardware package to qualify for Warranty
coverage. All balancers and locking mechanisms should be lubricated once a year with a silicone type spray. All sliding
tracks should be kept free of dirt and rust.
Caulking – Caulking is used to seal the perimeter of the doors against air and water infiltration. Caulking is not part of
the door and therefore is not covered under this warranty.
Storm Doors – Storm doors are warranted to the original purchaser homeowner to be free from defects in the material
and workmanship for one (1) year after the date of purchase. ADI will not be responsible for installation, repainting, or
refinishing work associated with the replacement of products deemed defective.
Selection of Product – Selection of the appropriate Accurate Dorwin product to conform to any and all local applicable
laws, ordinances, building codes and safety requirements is the sole responsibility of the architect, property owner/and or
contractor. Accurate Dorwin assumes no responsibility in this regard and makes no warranty with respect to the use and
or compliance with such law. Products which exceed the manufacturer’s specified size limitations are not covered under
this warranty.
Non Residential Installations – This Warranty does not apply to windows or doors installed in a building not used by
individual homeowners as their primary residence, including, but not limited to buildings owned in whole or in part by
corporations, governmental entities, religious organizations, condominiums or cooperative housing arrangements. For
such intangible entities capable of an infinite life, the duration for the warranty is twenty (20 years), non transferable.
Process for Warranty Claims
1) Upon discovery of a defective product, contact the Accurate Dorwin Authorized Dealer the product was purchased
from. If the product was purchased directly from Accurate Dorwin contact us by;
Mail: Accurate Dorwin Inc., 1535 Seel Ave., Winnipeg, MB R3T 1C6
Email: [email protected]
2) You will be required to provide the following information to make a claim:
a. Description of defective part and the date the defect first appeared
b. Proof of Purchase
c. Full name, address and phone number of original consumer
3) After submitting the claim, Accurate Dorwin will review the claim and contact the consumer within a reasonable
time.
4) Accurate Dorwin shall have the right to charge a reasonable fee to cover its expenses in the event that an on-site
inspection is required or requested by the consumer. Accurate Dorwin shall reimburse the consumer for the full amount of
the fee if the claim is determined to be covered by this warranty upon investigation of defect. After determining the
nature and the extent of any product failure, if required under the warranty, a replacement will be supplied, or the defect
repaired at Accurate Dorwin’s option.
Conditions, Exclusions, Disclaimers and Limitations
1) No representative of Accurate Dorwin shall have the authority to change, modify or expand this warranty and any
purported modification to this warranty shall be no force and effect.
Colour – The coated surfaces of the windows and patio doors are designed to maintain their original colour
characteristics, however, atmospheric conditions and sun exposure may cause some fading overtime. Fading is a normal
part of the weathering process and is not covered under this warranty.
2) The original warranty shall not be extended by any such repair or replacement, but the original warranty shall
continue in effect and be applicable to the repaired or replaced part(s).
Optional Veneer Interior – The optional veneer interior surfaces of ADI’s windows and patio doors must be painted or
stained immediately after installation. After sealing, the veneer is very resilient, however, it is subject to permanent
damage from moisture and mildew until properly sealed. Failure to paint or stain and seal the veneer interior immediately
after installation will nullify this warranty.
Condensation – Condensation on the interior of windows and doors is a natural result of excessive moisture in the air.
Condensation does not indicate a defective product or faulty installation and is not covered under warranty. Additional
information on the causes and cures is available from Accurate Dorwin upon request.
Caulking – Caulking is used to seal the perimeter of the windows against air and water infiltration. Caulking is not part
of the window or door and therefore is not covered under this warranty.
Installation – Accurate Dorwin specifications and installation instructions must be followed to validate this warranty.
Any installation variance not approved by Accurate Dorwin will nullify this warranty.
ACCUFRAME ™ Fiberglass Door
Fiberglass Door Slabs – Accurate Dorwin shall provide a 25 year warranty to the original purchaser homeowner against
warping and delaminating of fiberglass slabs provided that the door slab is sealed on all surfaces. Within that time period
ADI will at its sole discretion, replace or repair the defective product at no charge. ADI will not be responsible for
installation or refinishing work associated with the replacement of the products deemed defective. It shall be the
purchaser’s responsibility to complete the replacement of the items deemed defective, unless the consumer chooses to
use ADI’s services for which there will be an applicable charge. Door warpage is considered a defect when the deflection
exceeds 8mm providing that the door is manufactured with standard lock and hinge preparation. Action on claims for
bow, twist, or warp may be deferred at Accurate Dorwin’s option for a period not to exceed twelve (12) months after
installation to permit the door in question to acclimate to temperature and humidity conditions. This warranty is
transferable to one succeeding owner of the residence in which the doors were originally installed. The warranty period
for the second owner is fifteen (15) years from the original date of purchase.
During winter months door panels can bow due to extreme temperature variations between the interior and exterior of
the door. This is known as “thermal bow” and is not a sign of a defective product.
Exterior Door Glass – ADI will provide to the original purchaser homeowner a limited warranty for ten (10) years from
the date of purchase on all decorative, obscure, clear and Low E doorlites as well as patio door glass-sealed units.
Door Frame - All fiberglass door frames, under normal use and service, will be free from defects in material
workmanship for the lifetime of the product to the original purchaser homeowner. This warranty is transferable to one
succeeding owner of the residence in which the doors were originally installed. The warranty period for the second owner
is fifteen (15) years from the original date of installation.
3) Accurate Dorwin reserves the right to discontinue or modify any product line. In the unlikely event that any of the
original parts or components are no longer available, Accurate Dorwin will substitute parts or components of comparable
quality.
4) Accurate Dorwin does not provide a warranty for products that have not been paid for in full.
5) This warranty covers only those material defects as specified herein and does not include defects or damage caused
by accidents, fire, flood, hail or other Acts of God, extraordinary impact, vandalism, riot or civil disorder, misuse, mildew,
damage caused by pressure washing, modifications not performed by Accurate Dorwin, abuse, localized heat which
causes excess temperature differentials, harmful fumes, vapors or chemical pollutants in the atmosphere, building
settlement, structural failure of walls or foundations or failure of product on account of building construction or design.
6) This warranty is made in lieu of all other expressed or implied warranties and extends only to the original consumer.
In no event shall Accurate Dorwin be liable for any incidental or consequential damages of any kind, or resulting from any
defects, or for any delays in performance of this warranty due to circumstances beyond its control.
7) In no event will Accurate Dorwin be liable for consequential or incidental damages. In no event will Accurate Dorwin’s
liability exceed the price paid for the affected product or component.
Certifications and Ratings – Many Accurate Dorwin products are labeled with National Fenestration Rating Council
(NFRC) ratings. NFRC ratings are based on a combination of computer simulations and physical testing of product samples.
Certifications and ratings typically apply to single products only; however certain factory-mulled or combined product
configurations may also be certified. Performance of individual products may vary and will change over time, depending
upon the conditions of use. NFRC ratings are not performance warranties. For details on NFRC Energy Performance ratings,
go to www.NFRC.org.
Registration of Warranty – In order for you to be eligible for coverage under this warranty, the attached warranty
registration form must be completed, signed and returned to Accurate Dorwin within thirty (30) days after completion of
the installation.
Transfer of warranty – The above warranties are extended only to the original purchaser. This warranty is transferable
to one succeeding owner of the residence in which the windows and doors were originally installed. The warranty period
for the second owner is fifteen (15) years from the original purchase date. Completing the attached warranty Transfer
Form and returning it to Accurate Dorwin, along with a check payable to Accurate Dorwin in the amount of $75.00 CAD,
within sixty (60) days of the date that ownership is transferred, can transfer this warranty. Failure to so notify Accurate
Dorwin will relieve Accurate Dorwin of any future obligations under this warranty.
Hardware - ADI will provide to the original purchaser homeowner a limited warranty for ten (10) years from the date of
purchase on hardware purchased from ADI.
Paint/Stain Finish - ADI warrants that for a period of 10 years from the date of application the coating applied will not
crack, pit, peel, blister or suffer non-uniform fading discoloration (non-uniform fading discoloration resulting from
unequal exposure of surfaces to the sun and elements is not covered by this warranty).
Note: Subject to change. Consult Accurate Dorwin at time of ordering.
27
Catalogue Terms & Conditions
Intellectual Property Notice
No Warranties
Copyright © 2016 Accurate Dorwin Co.
No warranty of any kind, expressed, implied, and/or
statutory, including but not limited to the warranties of
non-infringement of third party rights, title, and/or
merchantability is given with respect to the contents of
this catalogue. All information is provided “as is”.
Accurate Dorwin Inc. owns the intellectual rights to this
catalogue. The content and arrangement in this
catalogue are all subject to copyright and other
intellectual property protection. Reproduction of
multiple copies of materials from this catalogue, in
whole or in part, for the purposes of commercial
redistribution without the written consent from
Accurate Dorwin Inc. is strictly prohibited.
Third Party Materials & Hyperlinks
Third party pictures, graphics, images, logos, and other
related materials are sourced with permission from the
rightful owner(s) and/or sourced from world wide web
public domains, wherein, it is considered free of use
unless explicitly restricted by the rightful owner(s).
Written consents are retained on file as proof of
authorization. In the event of a legal dispute and/or
instruction from the rightful owner(s), Accurate Dorwin
Inc. will remove and cease to use any copyrighted
materials within this catalogue.
Third party hyperlinks and other website addresses
within this catalogue are for reference use only.
Accurate Dorwin Co. makes no guarantee of the
validity of such sites nor we take responsibility for the
content at these third party sites and a link to them in
no way implies an endorsement or recommendation of
the products, services, or information found there.
Trademarks
The name Accurate Dorwin Inc. and logo are licensed
to Accurate Dorwin Inc.
The content of this catalogue is intended for the
Canadian and American markets only, and may be
changed at any time without prior notification or
obligation. Accurate Dorwin Inc. reserves the right to
revise, redesign, improve existing, discontinue,
substitute, replace, and/or launch new products
without notice at any time.
Disclaimer & Restriction of Liability
Accurate Dorwin Inc. makes no claims, promises,
and/or guarantees about the accuracy, adequacy,
completeness, and/or quality of the contents of this
catalogue. This catalogue may contain errors and
omissions, wherein, Accurate Dorwin Inc. expressly
disclaims liability for any damages whatsoever,
including special, indirect, and/or consequential
damages.
Accurate Dorwin Inc. reserves the right to revise these
terms and conditions. Users are bound by such revisions
and should, therefore consult with Accurate Dorwin
Inc. periodically.
Please call us toll free 1.888.982.4640 or e-mail
[email protected] or visit
www.accuratedorwin.com if you have any questions,
need any other documentation, clarification, and/or
revision to this catalogue.
The names of all other products in this catalogue are
the trademarks and/or trade names of their respective
owners. The display of trademarks and/or trade names
in this catalogue does not convey or create any
license or other rights in these marks or names. Any
unauthorized use of them is strictly prohibited. Users of
this catalogue are advised to seek permission from the
rightful owner(s) before using any such items.
Accurate Dorwin Inc. does not endorse or recommend
any particular website, product, material, and/or
service. Users of this catalogue are advised to use the
content and all other related materials with due
diligence.
28
NO MATTER WHAT THE NEED,
ACCURATE DORWIN OFFERS A WINDOW
TO MAKE THE MOST OF A BUILDING’S DESIGN.
29
30
For enquiries, contact us at [email protected]
P: 204.982.4630 | TF: 1.888.982.4640
Visit us at our showroom at
1535 Seel Avenue, Winnipeg, Canada
www.AccurateDorwin.com
100% Canadian since 1959
Version 16.1

Think FIBERGLASS First For Windows That Last!

Transcription

Similar documents

Scanpan Warranty Process_1 - rtsales

compresor nebulizador pingüino compresseur nébuliseur penguin

Jon Boats-Owner`s Manual

Energy Hog?

Get the free brochure

TX Systems Pricelist

harmony

gothicCabinetCraft.com

Product Manual

www.cbradio.nl: Comparison Chart Galaxy DX