200 Series Narroline Double-Hung Windows

200 Series Narroline Double-Hung Windows

Narroline® Double-Hung Windows
Contents
Narroline® Double-Hung Windows
Basic Unit Details - Narroline® Double-Hung Windows ......... 20-2
Basic Unit Details - Narroline Transom Windows .................. 20-3
Options / Accessories
Andersen® Grilles .............................................................. 20-4
Stools and Extension Jambs for Narroline Basic Units ....... 20-5
Stools and Extension Jambs for Narroline Transom Units ... 20-6
Sill Stop and Stool............................................................ 20-7
Combination Unit.............................................................. 20-8
Joining Details .................................................................... 20-9
Anchoring Methods ........................................................... 20-11
• Slim frame and sash profile maximize
the field of view.
Suggested Product Applications ........................................ 20-12
• Excellent for creating large window
combinations.
Circle Top™ for Narroline® Double-Hung Windows
• Low maintenance.
Basic Unit Details
Circle Top™ Basic Unit .................................................... 20-14
Options / Accessories
Andersen® Grilles ............................................................ 20-15
Extension Jambs ............................................................. 20-16
Trim Options and Applications
Plinth Blocks................................................................... 20-17
Interior Casing ................................................................ 20-18
Joining Details .................................................................. 20-19
Anchoring Methods ........................................................... 20-20
Suggested Product Applications ........................................ 20-21
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-1
Narroline® Double-Hung Windows
Basic Unit Details - Narroline ® Double-Hung Window
Basic Unit
Scale 3" = 1'-0" (1:4)
4-1/2"
(114)
1-5/16"
(33)
3/8"
(10) 15/32"
(12)
3/8"
(10)
1-3/16" (30)
1-5/8" (41)
Unit Dimension Height
Rough Opening Height
Head
1-7/16" (37)
Check Rail
Optional
Andersen®
stool
Optional
Andersen®
insect
screen
2-3/8" (61)
1-13/16" (46)
1/2" (13) 11/16" (17)
1-7/8"
(48)
2-1/4" (57)
1/2" (13)
3/8"
(10)
Sill
Vertical Section
7/8" 1-23/32"
(44)
(22)
1-23/32" 7/8"
(44)
(22)
Lower
sash
1/8"(3)
Upper
sash
Jamb
Jamb
1-7/16"
(37)
1/4" (6)
1-7/16"
(37)
Clear Opening Width
Unit Dimension Width
1/4" (6)
Rough Opening Width
Horizontal Section
20-2
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Basic Unit Details - Narroline ® Transom (TR) Window
Transom Unit
Scale 3" = 1'-0" (1:4)
1-5/16"
(33)
4-1/2"
(114)
4-1/2"
(114)
1-5/16"
(33)
3/8"
(10) 15/32"
(12)
3/8"
(10) 15/32"
(12)
3/8"
(10)
3/8"
(10)
1-3/16" (30)
13/16"
(21)
Optional
Andersen®
wood filler
1-5/8" (41)
Glass Height
Head
Unit Dimension Height
1-5/8" (41)
Rough Opening Height
Glass Height
Unit Dimension Height
Rough Opening Height
13/16"
(21)
1-3/16" (30)
Head
Reduced
bottom rail
Optional Andersen®
wood filler
1-11/16" (43)
1" (25)
2-1/4" (57)
2-1/4" (57)
3/8"
(10)
Sill
3/8"
(10)
1/2"
(13)
Sill
Vertical Section
Vertical Section
Transom Unit
Transom TR10 Size Unit
1/2"
(13)
7/8" (22)
1/8" (3)
Jamb
Jamb
4-1/2"
(114)
1-5/16"
(33)
2-5/8"
(67)
1/4" (6)
2-5/8"
(67)
Glass Width
Unit Dimension Width
1/4" (6)
Rough Opening Width
Horizontal Section
Transom Units
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-3
Narroline® Double-Hung Windows
Standard Grille Options / Accessories
Contact an Andersen Representative for project specific grille options.
200 Series Grille Options
Andersen® Finelight™
Grilles-Between-the-Glass
Removable Interior
Grille Profiles Scale = Full
Removable Interior Wood Grille Profiles (chamfer profile).
7/16"
7/16"
3/4"
7/16"
1-1/8"
7/8"
Andersen® Finelight™ Grilles-Between-the-Glass
20-4
3/8"
1/2"
3/4"
1"
Window Profile
Patio Door Profile
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Options / Accessories
Stools and Extension Jambs for Narroline ® Basic Unit
Scale 3" = 1'-0" (1:4)
7-1/8" (181)
6-9/16" (167)
5-1/4" (133)
4-9/16" (116)
Extension Jambs
(Modified tilt-wash extension jambs
with tongue removed.)
5-1/4" (133)
Wall
3/4" (19)
11/16"
(17)
23/32"
(18)
6-9/16" (167)
Wall
11/16"
(17)
2-1/32" (52)
Head
7-1/8" (181)
Wall
11/16"
(17)
2-19/32" (66)
Narroline® Stool
[For wall thicknesses up to 5-1/4" (133).]
2-3/8" (60)
11/16" (17)
1-7/8" (48)
Jamb
Modified tilt-wash stool with tongue removed.
[For wall thicknesses up to 7-1/8" (181).]
1-7/8" (48)
Optional Andersen®
sill stop & stool
Optional Andersen®
Narroline® window stool
3-1/4" (83)
3-27/32" (98)
6-9/16" (167)
7-1/8" (181)
Sill
4-9/16" (116)
Horizontal Section
5-1/4" (133)
Horizontal Section
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-5
Narroline® Double-Hung Windows
Options / Accessories
Stools and Extension Jambs for Narroline ® Transom and Sidelight Units
Scale 3" = 1'-0" (1:4)
7-1/8" (181)
6-9/16" (167)
5-1/4" (133)
4-9/16" (116)
Extension Jambs
(Modified tilt-wash extension jambs
with tongue removed.)
5-1/4" (133)
Wall
3/4" (19)
11/16"
(17)
23/32"
(18)
6-9/16" (167)
Wall
11/16"
(17)
2-1/32" (52)
Head
7-1/8" (181)
Wall
11/16"
(17)
2-19/32" (66)
Narroline® Stool
[For wall thicknesses up to 5-1/4" (133).]
2-3/8" (60)
11/16" (17)
1-7/8" (48)
Jamb
Modified tilt-wash stool with tongue removed.
[For wall thicknesses up to 7-1/8" (181).]
1-7/8" (48)
Optional Andersen®
sill stop & stool
Optional Andersen®
Narroline® window stool
3-1/4" (83)
3-27/32" (98)
6-9/16" (167)
7-1/8" (181)
Sill
4-9/16" (116)
5-1/4" (133)
Horizontal Section
Horizontal Section
20-6
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Options / Accessories
Sill Stop and Stool
Scale 3" = 1'-0" (1:4)
1-27/32"
(47)
Optional
Andersen®
sill stop
1/2"
(6)
3/16"
(5)
11/16"
(17)
Optional Andersen® pine stool
Vertical Section
Vertical Section
Sill Stop
Pine Stool
Note: Without 1/2” sill stop or stool, Narroline unit has no design pressure rating.
3/4" (19)
Optional Andersen®
high inside sill stop
and sash lift upgrade.
3/4" (19)
Optional Andersen®
high inside sill stop
and sash lift upgrade.
Optional Andersen®
stool set in sealant.
Optional
Andersen®
sill stop
R E V. 0 3 / 0 5
Vertical Section
Vertical Section
Sill Stop DP Upgrade
Sill Stop DP Upgrade with Andersen Stool
A R C H I T E C T U R A L
D E T A I L
F I L E
20-7
Narroline® Double-Hung Windows
Options / Accessories
Combination Unit
Scale 3" = 1'-0" (1:4)
1-5/16" (33)
4-1/2" (114)
At Head - Outer frame of combination
unit fits into head jamb window unit.
Hinges fastened to the exterior of the
head jamb enables easy cleaning of
the sill.
At Check Rail - Strong aluminum check
rail with stationary storm panel, insect
screen and lower operating panel.
Hinge
member
Combination
unit for
triple glazing
At Jamb - Storm panel operates on
smooth vinyl channels within the side
stile frame members. Insect screen is
located outside the storm panel.
Stationary
upper storm
panel
Insect
screen
Rough Opening Height
Complete unit furnished by Andersen,
not applied to window unit.
Head
Unit Dimension Height
At Sill - Combination unit frame bottom
rail with insect screen in place and
operating lower panel in closed position.
Check Rail
Optional
Andersen®
stool
Operating
lower panel
Sill
Vertical Section
Combination unit
Jamb
Horizontal Section
20-8
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Joining Details
Joining Details
Narroline Double-Hung to Narroline Double-Hung
Narroline ® Transom to Narroline Transom
Scale 3" = 1'-0" (1:4)
Scale 3" = 1'-0" (1:4)
®
Optional
Andersen®
interior
trim strip
Jamb
Jamb
Unit Dim.
Unit Dim.
1/16" (2)
Optional
Andersen®
mullion
spacer
Optional
Andersen®
narrow
mullion
spacer
Optional
Andersen®
exterior vinyl
trim strip set
in continuous
bead of sealant
each side
Optional
Andersen®
exterior vinyl
trim strip set
in continuous
bead of sealant
each side
Optional
Andersen®
1-1/2" casing
(2" modified)
Jamb
Unit Dim.
Unit Dim.
Unit Dim.
Unit Dim.
1/16" (2)
Non-Reinforced Mullion
Non-Reinforced Mullion
Jamb
Optional
Andersen®
interior
trim strip
Jamb
Jamb
Jamb
Optional Andersen®
1-1/2" casing
(2" modified)
Jamb
Optional
Andersen®
spacer block
Optional Andersen®
spacer block
Optional
Andersen® steel
reinforced join
Optional Andersen®
steel reinforced join
Optional
Andersen® exterior
vinyl trim strip
set in continuous
bead of sealant
each side
Optional Andersen®
exterior vinyl trim strip
set in continuous bead
of sealant each side
Unit Dim.
Unit Dim.
1/16" (2)
1/16" (2)
Steel Reinforced Mullion
Steel Reinforced Mullion
Jamb
Unit Dim.
Jamb
2" (51)
Unit Dim.
2" Support Mullion
Interior trim
by others
Jamb
Jamb
Interior trim
by others
Structural
support
by others
Structural
support
by others
Optional
Andersen®
2" support
mullion
wood filler
Optional
Andersen®
2" support
mullion
wood filler
Optional
Andersen®
2" support
mullion
trim strip set
in continuous
bead of
sealant each
side
Optional
Andersen®
2" support
mullion
trim strip set
in continuous
bead of
sealant each
side
Unit Dim.
2" (51)
Unit Dim.
2" Support Mullion
Joining Compatibilty
Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other
combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and
by visiting www.andersenwindows.com. Combination designs should always be checked for design pressure performance requirements to ensure the
appropriate joining method is specified.
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-9
Narroline® Double-Hung Windows
Joining Details
Narroline ® Transom (TR) over Narroline Double-Hung Window
Scale 3" = 1'-0" (1:4)
4-1/2"
(114)
1-5/16"
(33)
3/8"
(10)
3/8"
(10)
15/32"
(12)
1-3/16" (30)
Unit Dimension Height
1-5/8" (41)
Transom
1-11/16" (43)
1/8"
(3)
3/8"
(10)
3/8"
(10)
1/8"
(3)
2-1/4" (57)
1-3/16" (30)
1-5/8" (41)
Unit Dimension Height
Narroline® Unit Dimension + Narroline® Transom Unit -3/8" = Overall Unit Dimension
Rough Opening Height
13/16"
(21)
Head
1-13/16" (46)
1/2" (13)
2-1/4" (57)
1/2"
(13)
3/8"
(10)
Sill
Vertical Section
20-10
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Anchoring Methods
Installation Flange
Installation Flange (Reversed Position)
Scale 3" = 1'-0" (1:4)
Scale 3" = 1'-0" (1:4)
Standard application of installation flanges as shipped from Andersen
to be used for 4-1/2" (114mm) wall construction. Narroline® doublehung window is secured in the opening by using threaded fasteners
through the installation flange.
Regular installation flange in reverse position to accommodate
a 4-1/8" (105mm) wall.
1/2"
(13)
4-1/8"
(105)
4-1/2" 3-1/2"
(89)
(114)
1/2"
(13)
Jamb Clip
Threaded Masonr y Fastener / Expansion Sleeve
Scale 3" = 1'-0" (1:4)
Scale 3" = 1'-0" (1:4)
Double-hung window unit secured in opening by others using
Andersen® 302 stainless steel sheet metal jamb clips and
stainless steel screws. Bend the jamb clips to secure unit
fit in opening. Installation flange can be cut or removed as
required to accommodate the jamb clips.
Narroline® double-hung window is secured in the opening by removing the
sash stop and drilling through the side jamb into the masonry.
APPLICATION:
•
First secure jamb clip to back side of window unit jamb(s)
•
Apply 1' from corners of head jamb, sill and side jambs
•
Space jamb clips evenly (maximum distance apart 32" on center)
•
Jamb clip lateral design load capacity: maximum 200 lb.
Jamb clip
Threaded fastener
(furnished by
others)
Score markings for bending
1-1/2"
(38)
3/16"
(5)
Make sure that the unit frame parts do not become bowed when using
anchoring methods. Unit will not operate properly if frame parts are stressed.
3"
(76)
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-11
Narroline® Double-Hung Windows
Suggested Product Applications
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Remove
installation
flange
at head
Installation
flange
all around
Rgh. Opg.
Width
1/4"
(6)
Unit Dim.
Width
Unit Dimension Height
Unit Dim.
Width
Rgh. Opg.
Width
1/4"
(6)
Rough Opening Height
Unit Dimension Height
Head
Rough Opening Height
Head
Jamb
Jamb
1/2" (13)*
minimum
Installation
flange all
around
Sill
*1/2" (13) minimum to accommodate differential
shrinkage/expansion when brick is used with wood framing.
Sill
Vertical Section
Vertical Section
Wood Siding / 2 x 4 Wood Stud Framing
Brick Veneer / 2 x 6" Metal Stud Framing
Importance of Proper Installation
Rough Opening Height
Rgh. Opg.
Width
1/4"
(6)
Unit Dim.
Width
Unit Dimension Height
Head
Proper installation and maintenance of Andersen® products are essential if optimum
performance is to be fully attained. Written installation instructions which provide guidelines
for proper installation are available for Andersen products from your local Andersen supplier or
by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at
www.andersenwindows.com. Remember that every installation is different. Andersen strongly
recommends consultation with an Andersen product representative and with an experienced
contractor, architect, or structural engineer prior to the installation of any Andersen product.
Installation of Andersen products, including method of attachment, fastener selection, and
code compliance is the sole responsibility of the architect, building owner, contractor, and/or
consumer.
Construction by Others
Jamb
Andersen Corporation is not responsible for the design of, conditions in, or performance of,
adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration
of the Andersen units with the weather-repellent system of the building is the responsibility of
others.
Membrane
flashing over
installation
flange
(by others)
Installation
flange all
around
NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation
instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the
proper width of sealant joint around the perimeter of the window.
Sill
NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework.
Installation flange may be removed where construction sequence/ detailing requires no flange.
Vertical Section
E.I.F.S. / Concrete Masonr y Unit (CMU)
20-12
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Narroline® Double-Hung Windows
Suggested Product Applications
Wall Types
Scale 1-1/2" = 1'-0" (1:8)
Rgh. Opg.
Width
1/4"
(6)
Unit Dim.
Width
Rgh. Opg.
Width
Jamb
Unit Dimension Height
1/4"
(6)
Unit Dim.
Width
Unit Dimension Height
Rough Opening Height
Rgh. Opg.
Width
1/4"
(6)
Unit Dim.
Width
Unit Dimension Height
Head
Head
Head
Rough Opening Height
Installation
flange
at head
and jambs
Rough Opening Height
Optional
Andersen®
auxiliary
casing
Existing
frame wall
Optional
Andersen®
vinyl trim
board
Optional
Andersen®
auxiliary
casing
Jamb
Jamb
Installation
flange
all around
Remove
installation
flange
at sill
Installation
flange
all around
Sill
Sill
Sill
Vertical Section
Vertical Section
Vertical Section
Brick / Concrete Masonr y Unit (CMU)
Stucco / Concrete Masonr y Unit
(CMU) Inset Window
Existing
masonry wall
Importance of Proper Installation
Rgh. Opg.
Width
1/4"
(6)
Rough Opening Height
Head
Unit Dim.
Width
Unit Dimension Height
Optional
Andersen®
vinyl trim
board.
Trim to fit
as required.
Finish trimmed
edge with
Optional
Andersen
rigid vinyl
channel
Existing Stud Wall
Proper installation and maintenance of Andersen® products are essential if optimum
performance is to be fully attained. Written installation instructions which provide guidelines
for proper installation are available for Andersen products from your local Andersen supplier or
by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at
www.andersenwindows.com. Remember that every installation is different. Andersen strongly
recommends consultation with an Andersen product representative and with an experienced
contractor, architect, or structural engineer prior to the installation of any Andersen product.
Installation of Andersen products, including method of attachment, fastener selection, and
code compliance is the sole responsibility of the architect, building owner, contractor, and/or
consumer.
Construction by Others
Andersen Corporation is not responsible for the design of, conditions in, or performance of,
adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration
of the Andersen units with the weather-repellent system of the building is the responsibility of
others.
Jamb
Installation
flange all
around
NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation
instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the
proper width of sealant joint around the perimeter of the window.
Sill
NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework.
Installation flange may be removed where construction sequence/ detailing requires no flange.
Vertical Section
Existing Masonr y Wall
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
D E T A I L
F I L E
20-13
Specialty Windows
Basic Unit Details
Circle Top ™ Basic Unit
(for double-hung sizes)
1-5/16" (33)
4-1/2" (116)
13/16" (21)
7/16" (11)
2-5/8" (67)
1-3/8" (35)
Head
1-1/16" (27)
7/16" (11)
9/16" (14)
5/16" (8)
2-3/8" (60)
Sill
Vertical Section
Scale 3" = 1'-0" (1:4)
Extension Jambs for Circle Top ™ (double-hung size) Windows
Scale 3" = 1'-0" (1:4)
Unit Dim. Width
7-1/8" (181)
5-1/4"
Wall
6-9/16" (167)
6-9/16"
Wall
4-9/16" (116)
7-1/8"
Wall
3/4" (19) at curve
11/16" (17) at sill
5-1/4" (133)
Face: 11/16" (17)
Face: 2" (51)
2-9/16" (65)
Optional Andersen®
arched casing
1/4" (6)
Rough Opening Width
Horizontal Section
Extension jambs available for 4-9/16" (116), 5-1/4" (133), 6-9/16"
(167) or 7-1/8"(181) wall thickness. Other wall dimensions can be
accommodated with extension jamb modification. 6-9/16" extension
jamb is predrilled for easy application.
20-14
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Specialty Windows
Standard Grille Options / Accessories
Contact an Andersen Representative for project specific grille options.
200 Series Grille Options
Andersen® Finelight™
Grilles-Between-the-Glass
Removable Interior
Grille Profiles Scale = Full
Removable Interior Wood Grille Profiles (chamfer profile).
7/16"
7/16"
3/4"
7/16"
1-1/8"
7/8"
Andersen® Finelight™ Grilles-Between-the-Glass
R E V. 0 3 / 0 5
3/8"
1/2"
3/4"
1"
Window Profile
Patio Door Profile
A R C H I T E C T U R A L
D E T A I L
F I L E
20-15
Specialty Windows
Extension Jambs for Circle Top™ (double-hung size) Windows
Scale: 3”=1’-0” (1:4)
Unit Dim. Width
7-1/8" (181)
5-1/4"
Wall
6-9/16" (167)
6-9/16"
Wall
4-9/16" (116)
7-1/8"
Wall
3/4" (19) at curve
11/16" (17) at sill
5-1/4" (133)
Face: 11/16" (17)
Face: 2" (51)
2-9/16" (65)
Optional Andersen®
arched casing
1/4" (6)
Rough Opening Width
Horizontal Section
Extension jambs available for 4-9/16" (116), 5-1/4" (133), 6-9/16"
(167) or 7-1/8"(181) wall thickness. Other wall dimensions can be
accommodated with extension jamb modification. 6-9/16" extension
jamb is predrilled for easy application.
20-16
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5
Specialty Windows
Trim Options and Applications—Circle Top ™ and Elliptical Windows
Plinth Blocks
Scale: Half
Available in maple or oak.
Optional Andersen®
interior arch casing
(Colonial or Ranch styles)
Optional Andersen®
transom casing
Optional Andersen®
plinth blocks
Interior trim by others
1-1/8" R
3-7/8" (98mm)
1-1/2" R
2-7/8" (73mm)
2-7/8" (73mm)
3-7/8" (98mm)
7/8" (22mm)
7/8" (22mm)
For use with 2-1/4" or 2-1/2" (57mm or 64mm) casing.
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
For use with 3-1/2" (89mm) casing.
D E T A I L
F I L E
20-17
Specialty Windows
Trim Options and Applications—Circle Top ™ and Elliptical Windows
Interior Casing
Scale: Full
Available for all cur ved portions of windows.
Ranch Style - WM 315
2-1/2" x 11/16" (64mm x 17mm)
Available in select hardwoods.
Ranch Style - WM 324
2-1/4" x 11/16" (57mm x 17mm)
Available in select hardwoods.
5/32" (4mm) typical
Colonial Style - WM 351
2-1/2" x 11/16" (64mm x 17mm)
Available in select hardwoods.
Colonial Style - WM 366
2-1/4" x 11/16" (57mm x 17mm)
Available in select hardwoods.
Colonial Style - WM 444
3-1/2" x 11/16" (89mm x 17mm)
Available in select hardwoods..
5/32" (4mm) typical
Circle Top™ Windows (double-hung type)
5/32" (4mm) typical
Circle Top™ Windows (casement/awning type),
Circle and Oval
20-18
A R C H I T E C T U R A L
Elliptical
D E T A I L
F I L E
R E V. 0 3 / 0 5
Specialty Windows
Joining Details—Circle Top ™ Window
Circle Top ™ Window over Narroline ® Double-Hung Window
Circle Top ™ Window over Circle Top ™ Window
Scale 3" = 1'-0" (1:4)
(double-hung type) Scale 3" = 1'-0" (1:4)
Circle Top™ Unit
Unit Dimension
Unit Dimension
Circle Top™ Unit (for double-hung)
Andersen®
plinth block
beyond
Unit Dimension
minus 1/2"
Optional Andersen®
1-1/2" (38) casing
Optional Andersen®
trim strip set in
continuous
bead of sealant
each side
Andersen®
plinth block
beyond
Optional
Andersen®
1-1/2" (38)
inside
transom
casing
1/8" (3)
UnitDimension
1/8" (3)
Wood blocking
by others
Circle Top™ Unit
Optional Andersen®
trim strip set in
continuous
bead of sealant
each side
Narroline® Unit
Non-Reinforced Joining
Non-Reinforced Transom
For narrow wood joining material:
Overall unit dimension height = the sum of the individual unit heights – 3/8" (10mm)
Overall rough opening height = the sum of the individual unit heights – 3/8" (10mm)
Circle Top™ Unit (for double-hung)
Unit Dimension
Double-hung
screw locations
no. 10 x 2-1/4" screw
Optional Andersen®
steel reinforced join
5/16" (8)
UnitDimension
minus 1/2"
Optional Andersen®
1-1/2" (38) casing
(2" modified)
Picture/transom
screw locations
No. 10 x 2-1/4" screw
Optional Andersen®
trimstrip set in
continuous
bead of sealant
each side
Narroline® Unit
Steel Reinforced Transom
For narrow steel joining material:
Overall unit dimension height = the sum of the individual unit heights – 3/16" (5mm)
Overall rough opening height = the sum of the individual unit heights – 3/16" (5mm)
R E V. 0 3 / 0 5
A R C H I T E C T U R A L
Joining Compatibilty
Many Andersen® units are designed to be joined with
other Andersen units in a variety of non-reinforced and
reinforced combinations. Other combination types and
joining methods can be viewed in the Andersen® Product
Guide for Professionals, in Andersen Window Studio®
software, and by visiting www.andersenwindows.com.
Combination designs should always be checked for
design pressure performance requirements to ensure the
appropriate joining method is specified.
D E T A I L
F I L E
20-19
Specialty Windows
Anchoring Methods—Circle Top ™ , Elliptical, Circle and Oval Windows
Installation Flange
Threaded Masonr y Fastener / Expansion Sleeve
Scale 3" = 1'-0" (1:4)
Window is secured in the opening by using threaded fasteners through the
installation flange.
Scale 3" = 1'-0" (1:4)
Window unit is secured in the opening by securing a side jamb clip to the
unit, pre-drilling into masonry, inserting expansion sleeve, and driving flat
head screw. Vinly flange to be cut, or removed, as required.
Countersink
and plug
Exterior sheathing
Installation flange
Horizontal Section
Circle Top™ (double-hung)
or Elliptical Window
Jamb Clip
Scale 3" = 1'-0" (1:4)
Window unit secured in opening by others using Andersen® 302
stainless steel sheet metal jamb clips and stainless steel screws.
Bend the jamb clip to secure unit fit in opening. Installation flange
can be cut as required to accommodate the jamb clip.
Horizontal Section
APPLICATION:
Circle Top™ (double-hung)
or Elliptical Window
•
First secure jamb clip to back side of window unit jamb(s)
•
Apply 1' from corners of head jamb, sill and side jambs
•
Space jamb clips evenly (maximum distance apart 32" on center)
•
Jamb clip lateral design load capacity: maximum 200 lb.
Expansion sleeve
with flat head screw
(furnished by others)
Wood buck
Jamb clip flat
Horizontal Section
Circle Top™ (casement/awning),
Circle or Oval Window
Optional Andersen® auxiliary casing
20-20
A R C H I T E C T U R A L
Make sure that the unit frame parts do not become bowed when using
anchoring methods. Unit will not operate properly if frame parts are stressed.
D E T A I L
F I L E
R E V. 0 3 / 0 5
Specialty Windows
Suggested Product Applications—Circle Top ™ , Elliptical, Circle and Oval Windows
Wall Types
Scale 1-1/2" = 1'-0" (1:8)
Remove
installation
flange all
around
Head
Unit Dimension Height
Rough Opening Height
Unit Dimension Height
Optional
Andersen®
arch casing
Optional
Andersen®
3/4" x 5-1/2"
(19 x 140)
vinyl trim
board
Andersen®
Installation
flange all
around
Narroline®
Head
Optional Andersen®
vinyl trim strip
set in sealant
window unit
Transom
Rough Opening Height
Installation
flange
all around
Transom
Optional Andersen®
inside transom casing
Andersen® Narroline®
window unit
Vertical Section
Vertical Section
Wood Siding / 2 x 4 Wood Stud Framing
Brick Veneer / 2 x 6" Metal Stud Framing
Importance of Proper Installation
Membrane
flashing over
installation
flange
(by others)
Rough Opening Height
Unit Dimension Height
Installation
flange all
around
Head
Optional Andersen®
vinyl trim strip
set in sealant
Transom
Optional Andersen®
inside transom casing
Andersen® Narroline®
window unit
Vertical Section
E.I.F.S. / Concrete Masonr y Unit (CMU)
R E V. 0 3 / 0 5
Proper installation and maintenance of Andersen® products are essential if optimum
performance is to be fully attained. Written installation instructions which provide guidelines
for proper installation are available for Andersen products from your local Andersen supplier or
by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at
www.andersenwindows.com. Remember that every installation is different. Andersen strongly
recommends consultation with an Andersen product representative and with an experienced
contractor, architect, or structural engineer prior to the installation of any Andersen product.
Installation of Andersen products, including method of attachment, fastener selection, and
code compliance is the sole responsibility of the architect, building owner, contractor, and/or
consumer.
Construction by Others
Andersen Corporation is not responsible for the design of, conditions in, or performance of,
adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration
of the Andersen units with the weather-repellent system of the building is the responsibility of
others.
NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation
instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the
proper width of sealant joint around the perimeter of the window.
NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of
framework. Installation flange may be removed where construction sequence/ detailing requires no flange.
A R C H I T E C T U R A L
D E T A I L
F I L E
20-21
Specialty Windows
Suggested Product Applications—Circle Top ™ , Elliptical, Circle and Oval Windows
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Transom
Optional Andersen®
vinyl trim strip
set in sealant
Optional Andersen®
inside transom casing
Andersen® Narroline®
window unit
Transom
Rough Opening Height
Unit Dimension Height
Head
Optional Andersen®
vinyl trim strip
set in sealant
Existing
frame wall
Rough Opening Height
Head
Unit Dimension Height
Rough Opening Height
Unit Dimension Height
Optional Andersen®
interior arch casing
Optional Andersen®
inside transom casing
& plinth block
Optional Andersen®
vinyl trim strip
set in sealant
Andersen® Narroline®
window unit
Transom
Andersen®
Narroline®
window unit
Vertical Section
Vertical Section
Vertical Section
Brick / Concrete Masonr y Unit (CMU)
Stucco / Concrete Masonr y Unit
(CMU) Inset Window
Existing Stud Wall
Optional
Andersen®
inside
transom
casing &
plinth
blocks
Importance of Proper Installation
Existing
masonry wall
Unit Dimension Height
Optional Andersen®
arched extension
jamb trimmed to fit
Optional Andersen®
vinyl trim strip
set in sealant
Transom
Rough Opening Height
Head
Optional Andersen®
inside transom casing
& plinth blocks
Andersen® Narroline®
window unit
Vertical Section
Existing Masonr y Wall
20-22
Proper installation and maintenance of Andersen® products are essential if optimum
performance is to be fully attained. Written installation instructions which provide guidelines
for proper installation are available for Andersen products from your local Andersen supplier or
by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at
www.andersenwindows.com. Remember that every installation is different. Andersen strongly
recommends consultation with an Andersen product representative and with an experienced
contractor, architect, or structural engineer prior to the installation of any Andersen product.
Installation of Andersen products, including method of attachment, fastener selection, and
code compliance is the sole responsibility of the architect, building owner, contractor, and/or
consumer.
Construction by Others
Andersen Corporation is not responsible for the design of, conditions in, or performance of,
adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration
of the Andersen units with the weather-repellent system of the building is the responsibility of
others.
NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation
instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the
proper width of sealant joint around the perimeter of the window.
NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of
framework. Installation flange may be removed where construction sequence/ detailing requires no flange.
A R C H I T E C T U R A L
D E T A I L
F I L E
R E V. 0 3 / 0 5