BLANCO STEELART. Masterpieces in stainless steel.

Product programme 2015 – 191900
Stainless steel worktops, lateral, back and front panels
www.blanco-steelart.com
BLANCO STEELART.
Masterpieces in stainless steel.
Exclusive and individual worktops from our high-tech manufactory.
STEELART – BLANCO Kitchen Technology’s competence
centre for stainless steel workmanship and advice.
Attractive prospects:
stainless steel solutions
at the highest level.
We take care of every detail for exclusive products associated
BLANCO STEELART. Exclusive sinks and
functional areas for every style
of interior design.
of discerning customers.
with washing-up and food preparation. Thanks to our
experience and passion in working with stainless steel,
STEELART incorporates a high level of individual design
– in order that it can fulfil with certainty the specific wishes
The STEELART product ranges open up new design
perspectives: with hand-crafted bowls and sink units,
and custom-made stainless steel designs, you can
achieve something out of the ordinary. After all, STEELART
provides programme depth for more flexibility – and
functionality to suit. Thanks to a diverse range of high-class
individual elements and matching details.
We have compiled everything you need to know about
custom-made STEELART stainless steel worktops on
the following pages. You will find the range of exclusive
STEELART bowls and sinks in the BLANCO catalogue
or on our website at www.blanco-steelart.com.
2
CREATION – Custom-made Designs
Stainless steel BLANCO Durinox®
Worktops
Stainless steel BLANCO Durinox®
6-9
Specifications
Weld-in bowls BLANCO ZEROX in BLANCO Durinox®
10-11
Back and front panels
Stainless steel BLANCO Durinox®
12-13
Stainless steel satin polish and satin matt
Worktops
Stainless steel satin polish and satin matt
14-19
Specifications
Weld-in bowls and sinks BLANCO CLARON (R10)
20-23
Weld-in bowls and sinks BLANCO ZEROX (R0)
24-25
Weld-in sinks BLANCO DIVON II (R10)
26
Weld-in bowls BLANCO ANDANO (R22)
27
Weld-in bowls BLANCO SUPRA (R60)
28
Lateral panels
Stainless steel satin polish and satin matt
30-31
Back and front panels
Stainless steel satin polish and satin matt
32-33
Mixer Taps, Control Elements, Accessories
Mixer taps and control elements
Accessories
36-40
41
Advice
Cleaning and care
42-45
Technical information
46-47
Product data sheet for thin worktops
48-49
3
Harder. More elegant.
More exclusive.
The resistant Durinox® surface
by STEELART.
Discover the unique material innovation
from the STEELART high-tech manufactury:
BLANCO Durinox®.
The new stainless steel surface offers a
winning combination of real durability and
a smooth, homogenous matt surface effect.
These unique characteristics make Durinox®
stainless steel worktops extremely scratchresistant.
4
BLANCO Durinox® worktops,
specifications, lateral, back and
front panels
The perfect combination: STEELART also
offers BLANCO ZEROX weld-in bowls
featuring the new stainless steel surface
to match the Durinox® worktop.
5
WORKTOPS Durinox®
with edge radius R1
Stainless steel worktops R1
in BLANCO Durinox®.
• Unique material innovation:
specially finished stainless steel
surface in a velvety-matt look and
with a homogeneous structure
• Highly resistant to scratches:
more than twice as hard in
comparison with conventional
stainless steel surfaces
• Unbeatable planning freedom:
– Smooth version for any standard
worktop size and freely planned
weld-in elements
– In a perfectly matched finish with
BLANCO ZEROX weld-in bowls
Worktops BLANCO Durinox®
Stainless steel R1
Stainless steel BLANCO Durinox® with R1
Standard edge version R1 on two sides. Third and fourth
edges not finished. Underside completely bonded with
substrate (grey) coated on all sides and all-round edge
band. On edge thicknesses of > 40 mm, the edge area is
doubled.
Max. length: 3800 mm. Other dimensions on request.
Min. calculation base: 500 mm.
BLANCO Durinox® surface
Stainless steel worktops R1
(price per running metre)
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
Edge thickness
12 / 15.5 / 21 / 31 / 40 mm
Edge thickness
50.5 / 59.5 mm
Edge thickness
80 / 100 mm
A12U* / A15.5U* / A21U /
A31U / A40U
A50.5U / A59.5U
A80U / A100U
Order
Code
Order
Code
Order
Code
ES0501
ES0502
ES0503
ES0504
ES0505
ES0506
ES0507
ES0508
ES0509
ES0510
ES0511
ES0512
ES0513
ES0514
ES0515
ES0516
ES0517
ES0518
ES0519
ES0520
ES0521
ES0522
ES0523
ES0524
ES0530
ES0531
ES0530
ES0531
ES0530
ES0531
Edge specification
Additional folding on 3rd edge
Additional folding on 3rd and 4th edge
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details
see page 46/47.
R1 edge design
Planning information
• Please state which sides are visible.
• The minimum worktop thickness is 12 mm. For more information on thin worktops
see pages 48/49.
• If the given maximum lengths are exceeded, a screw connection must be included.
See pages 7 and 46.
* Please observe the information on page 48/49.
6
BLANCO Durinox® worktops,
specifications, lateral, back and
front panels
WORKTOPS Durinox®
with edge radius R1
Order
Code
Cut-outs and slopes
EL0125
EL0126
EL0127
EL0128
Cut-out for integrated hob or sink*
Corner cut-out (only without edge finishing)
Slope (without edge finishing)
Sloped corner cut-out (only without edge finishing)
Drill hole for tap up to Ø 36 mm
Connections
SR0001
SR0002
90° screw connection
45° screw connection
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
Further technical details see page 46/47.
* Please specify cut-out details.
For hobs please include manufacturer’s cut-out data specification.
Cut-outs and slopes
Cut-out for integrated
hob or sink
Doubling of worktops with
thickness < 31 mm
Corner cut-out
(only without edge finishing)
Slope
(without edge finishing)
90° screw connection
bottom view
90° screw connection for
12-15.5 mm thin worktops
top view
90° screw connection for
12-15.5 mm thin worktops
bottom view
Sloped corner cut-out
(only without edge finishing)
Connections
90° screw connection
top view
7
Sophisticated edge:
solid, light, precise.
WORKTOPS Durinox®
with SolidEdge
The impressive SolidEdge
stainless steel worktop in
BLANCO Durinox® boasts
unique innovative features:
• The particularly robust stainless
steel surface is extremely
scratch-resistant
• It offers unbeatable freedom and
safety during the planning stage:
– More stability on wider base
units and hob cut-outs
Worktops BLANCO Durinox®
Stainless steel SolidEdge
Worktops stainless steel Durinox® SolidEdge
Overlap 25 mm (price per running metre)
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
Worktops stainless steel Durinox® SolidEdge
Overlap 35 mm (price per running metre)
SE11/25*
SE11/35*
SE20/25
SE20/35
SE30/25
SE30/35
Order
Code
Order
Code
Order
Code
SE11/25*
SE20/25
SE30/25
ES0600
ES0601
ES0602
ES0603
ES0604
ES0605
ES0606
ES0607
ES0608
ES0609
ES0610
ES0611
ES0612
ES0613
ES0614
ES0615
ES0616
ES0617
ES0618
ES0619
ES0620
ES0621
ES0622
ES0623
Order
Code
Order
Code
Order
Code
SE11/35*
SE20/35
SE30/35
20
Stainless steel BLANCO Durinox® with SolidEdge
Edge thickness 6 mm, slightly chamfered on one side.
Second, third and fourth edges not processed. Underside
completely bonded with substrate (grey) coated on all sides
and all-round edge band (anthracite – RAL 7015).
Max. length: 3800 mm. Other dimensions on request.
Min. calculation base: 500 mm.
BLANCO Durinox® surface. The surface of the 6 mm solid
edge is finely brushed stainless steel (satin polish).
6
35
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
ES0640
ES0641
ES0642
ES0643
ES0644
ES0645
ES0646
ES0647
ES0648
ES0649
ES0650
ES0651
ES0652
ES0653
ES0654
ES0655
ES0656
ES0657
ES0658
ES0659
ES0660
ES0661
ES0662
ES0663
* Please observe the information on page 48/49.
8
BLANCO Durinox® worktops,
specifications, lateral, back and
front panels
WORKTOPS Durinox®
with SolidEdge
Edge-version
(price per running metre)
Order
Code
additional edge specification SolidEdge overlap 25 mm
for side / back edges
additional edge specification SolidEdge overlap 35 mm
for side / back edges
ES0630
ES0631
Cut-outs and slopes
EL0125
EL0126
EL0127
EL0128
Cut-out for integrated hob or sink*
Corner cut-out (without edge finishing)
Slope (without edge finishing)
Sloped corner cut-out (without edge finishing)
Drill hole for tap up to Ø 36 mm
Connections
SR0001
SR0002
90° screw connection
45° screw connection
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
For more technical information see page 46/47.
* Please specify cut-out details.
For hobs please include manufacturer’s cut-out data specification.
Cut-outs and slopes
Cut-out for integrated
hob or sink
Doubling of worktops with
thickness < 31 mm
Corner cut-out
(without edge finishing)
Slope
(without edge finishing)
Sloped corner cut-out
(without edge finishing)
90° screw connection
bottom view
90° screw connection
for 12-15.5 mm thin worktops
top view
90° screw connection
for 12-15.5 mm thin worktops
bottom view
Connections
90° screw connection
top view
base unit
base unit
height base unit
Fronts with integrated strip handles:
door front
Front-aligned specification:
height base unit
Planning recommendation for woktops with SolidEdge
door front
Planning recommendation for worktops with SolidEdge
Planning information
• Please indicate which sides are visible.
• If the indicated maximum lengths are exceeded, then a screw connection is to be included. See also page 46.
• The minimum worktop thickness is 11 mm. Information on thin worktops is given on pages 48/49.
9
WELD-IN BOWLS Durinox®
Weld-in bowls Durinox®
Bowl radius R0
BLANCO ZEROX 180 in
BLANCO Durinox®
NEW
BLANCO ZEROX 340 in
BLANCO Durinox®
NEW
BLANCO ZEROX 400 in
BLANCO Durinox®
Dimensions
Scope of supply
Bowl 180 x 400 x 130 mm with 3½"
basket strainer and waste kit.
Order
Code
BE0268
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
Bowl 340 x 400 x 175 mm with 3½"
basket strainer and waste kit.
BE0269
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
Bowl 400 x 400 x 175 mm with 3½"
basket strainer and waste kit.
BE0264
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
10
BLANCO Durinox® worktops,
specifications, lateral, back and
front panels
SPECIFICATIONS
Weld-in bowls Durinox®
Weld-in bowls Durinox®
bowl radius R0
Dimensions
Scope of supply
BLANCO ZEROX 450 in
BLANCO Durinox®
Bowl 450 x 400 x 175 mm with 3½"
basket strainer and waste kit.
NEW
Order
Code
BE0270
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
BLANCO ZEROX 500 in
BLANCO Durinox®
Bowl 500 x 400 x 175 mm with 3½"
basket strainer and waste kit.
BE0265
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
550
BLANCO ZEROX 550 in
BLANCO Durinox®
min.40
BE0271*
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
85
400
NEW
Bowl 550 x 400 x 175 mm with 3½"
basket strainer and waste kit.
BLANCO ZEROX 700 in
BLANCO Durinox®
Bowl 700 x 400 x 185 mm with 3½"
basket strainer and waste kit.
NEW
BE0272
Pop-up waste not included in
scope of supply. Please order
separately (overview see page 40).
BLANCO ZEROX 550-T in
BLANCO Durinox®
Drainer 550 x 400 x 18 mm
with 1½" basket strainer (not to close),
incl. waste fitting.
NEW
BE0273
Slope of drainer: 11 mm - 18 mm.
Accessories
NEW
BLANCO CapFlow™
in Durinox® finish
Outlet cover
520 291
Planning recommendation
• In combination with BLANCO Durinox® worktops and weld-in bowls, we recommend
stainless steel satin matt surfaces for mixer taps and control elements.
Planning information
• * If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out (see page 46).
• Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow.
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
11
BACK PANELS Durinox®
Back panels in BLANCO Durinox®
Stainless steel BLANCO Durinox®
Back panel with sealing tape on top and bottom.
Sides covered with stainless steel.
Max. size: 3800 x 1200 mm.
BLANCO Durinox® surface
R1 radius
Back panel in BLANCO Durinox®
Order
Code
Minimum calculated amount per piece
Price per square metre
RW0201
Edge design
RW0210
RW0211
Additional edging on 3rd side (corners welded)
Additional edging on 3rd and 4th sides (all sides closed)
Cut-outs and slopes
RW0212
RW0213
RW0214
RW0215
Corner cut-out (only without edge finishing)
Centre cut-out (only without edge finishing)
Cut-out for connections
Slope (without edge finishing)
Cut-outs and slopes
Corner cut-out (only without
edge finishing)
12
Centre cut-out (only without
edge finishing)
Cut-out for connections
Slope (without edge finishing)
BLANCO Durinox® worktops,
specifications, lateral, back and
front panels
FRONT PANELS Durinox®
Front panels in BLANCO Durinox®
Stainless steel BLANCO Durinox®
The front panel is closed on all sides.
Max. size: 2500 x 1200 mm.
Surface BLANCO Durinox®.
R1 radius
Front panel in BLANCO Durinox®
Minimum calculated amount per piece
Price per square metre
Order
Code
FB0201
13
WORKTOPS
Stainless steel satin polish and satin matt finish
BLANCO STEELART demonstrates
its competence in stainless steel
with the edge version, R1.
The radius of just 1 mm is typical
of the high standard of production
and gives the worktop a clear,
linear impression.
with edge radius R1
Worktops stainless steel satin polish and
satin matt finish with edge radius R1
Stainless steel R1
Standard edge version R1 on two sides. Third and fourth
edges not finished. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band.
On edge thicknesses of > 40 mm, the edge area is doubled.
Max. length: 3800 mm. Other dimensions on request.
Min. calculation base: 500 mm.
Choice of finely brushed satin polish or brushed satin
matt finish.
Worktops stainless steel R1
(price per running metre)
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
Innovative and unique
Edge thickness
12 / 15.5 / 21 / 31 / 40 mm
Edge thickness
50.5 / 59.5 mm
Edge thickness
80 / 100 mm
A12U* / A15.5U* / A21U /
A31U / A40U
A50.5U / A59.5U
A80U / A100U
Order
Code
Order
Code
Order
Code
ES0100
ES0101
ES0102
ES0104
ES0105
ES0106
ES0107
ES0108
ES0109
ES0110
ES0111
ES0113
ES0114
ES0115
ES0116
ES0117
ES0118
ES0119
ES0120
ES0122
ES0123
ES0124
ES0125
ES0126
ES0130
ES0131
ES0130
ES0131
ES0130
ES0131
Edge specification
Additional folding on 3rd edge
Additional folding on 3rd and 4th edge
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details
see page 46/47.
R1 edge design
Planning information
• Please state which sides are visible.
• * The minimum worktop thickness is 12 mm. For more information on thin worktops
see pages 48/49.
• If the given maximum lengths are exceeded, a screw connection must be included.
See pages 17 and 46.
14
WORKTOPS
Stainless steel satin polish and satin matt finish
Stainless steel worktops
satin polish and satin matt
with edge radius R3
Worktops stainless steel satin polish and
satin matt finish with edge radius R3
Stainless steel R3
Standard edge version R3 on two sides. Third and fourth
edges not finished. Underside completely bonded with
substrate (grey) coated on all sides and all-round edge band.
On edge thicknesses of > 40 mm, the edge area is doubled.
Max. length: 3800 mm. Other dimensions on request.
Min. calculation base: 500 mm.
Choice of finely brushed satin polish or brushed satin
matt finish.
Worktops stainless steel
(price per running metre)
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
Edge thickness
12 / 15.5 / 21 / 31 / 40 mm
Edge thickness
50.5 / 59.5 mm
Edge thickness
80 / 100 mm
A12U* / A15.5U* / A21U /
A31U / A40U
A50.5U / A59.5U
A80U / A100U
Order
Code
Order
Code
Order
Code
ES0300
ES0301
ES0302
ES0304
ES0305
ES0306
ES0307
ES0308
ES0309
ES0310
ES0311
ES0313
ES0314
ES0315
ES0316
ES0317
ES0318
ES0319
ES0320
ES0322
ES0323
ES0324
ES0325
ES0326
ES0330
ES0331
ES0330
ES0331
ES0330
ES0331
Edge specification
Additional folding on 3rd edge
Additional folding on 3rd and 4th edge
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
Further technical details see page 46/47.
R3 edge design
Planning information
• Please state which sides are visible.
• * The minimum worktop thickness is 12 mm. For more information on thin worktops
see pages 48/49.
• If the given maximum lengths are exceeded, a screw connection must be included.
See pages 17 and 46.
15
EDGE SPECIFICATION
Exclusive and distinctive
Stainless steel satin polish and satin matt
finish with chamfer
The exclusive chamfered edge
design adds a striking touch to the
worktop. It is particularly elegant in
combination with a 12-mm worktop.
Stainless steel satin polish and satin matt finish
with chamfer
Order
Code
Edge specification chamfer (price per running metre)
Additional charge on worktop price R1 per running metre (see page14)
Only available with the surface finishes stainless steel satin polish and satin matt.
ES0170
Stainless steel chamfer
recommended for
edge thicknesses
> 21 - 100 mm
recommended for
edge thicknesses
to 21 mm
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
Further technical details see page 46/47.
Calculation examples
Chamfered stainless steel island worktop
Stainless steel worktop : length 2,400 mm, depth 1,200 mm
cut-out
Order
Code
worktop incl. folding on 2 edges A40U
ES0108
2.4 m
additional folding on 3rd and 4th edge
ES0131
1
Chamfer – additional charge per running metre
ES0170
7.2 m
Cut-out
EL0125
1
Bowl BLANCO CLARON 500
BE0241
1
1 x drill hole for tap
Edge 1-4: A40U F3.5
16
Quantity
1
WORKTOPS
Stainless steel satin polish and satin matt finish
Order
Code
Cut-outs and slopes
Stainless steel worktops
satin polish and satin matt
EL0125
EL0126
EL0127
EL0128
Cut-out for integrated hob or sink*
Corner cut-out (without edge finishing)
Slope (without edge finishing)
Sloped corner cut-out (without edge finishing)
Drill hole for tap up to Ø 36 mm
Connections
SR0001
SR0002
90° screw connection
45° screw connection
Curves
EL0129
EL0132
Rounded corner (with edge finishing)
Curve (with edge finishing)
Up-stands per piece
EL0133
EL0142
Edge folding Z40/22, lateral sides closed
Edge folding C25-C40
Profiled edges per worktop
EL0136
Profiled edge P8Z**
visually coordinated with ZEROX bowls with radius R0
Profiled edge P8C**
visually coordinated with CLARON bowls with radius R10
EL0137
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
Further technical details see page 46/47.
* Please specify cut-out details.
For hobs please include manufacturer’s cut-out data specification.
** Where the zone is limited (wet area), the minimum distance to the finished worktop edge is 40 mm (see also page 49).
Cut-outs and slopes
Cut-out for integrated
hob or sink
Curves
Corner cut-out
(without edge finishing)
Slope (without edge
finishing)
Sloped corner cut-out
(without edge finishing)
Rounded corner
(with edge finishing)
Curve (with edge
finishing)
Connections
90° screw connection
top view
90° screw connection
bottom view
Profiled edges
Profiled edge P8Z
90° screw connection
for 12-15.5 mm thin worktops
top view
90° screw connection
for 12-15.5 mm thin worktops
bottom view
Up-stands
Profiled edge P8C
Edge folding Z40/22
C-edge folding
17
Sophisticated edge:
solid, light, precise.
The SolidEdge stainless steel
worktop impresses with innovative
technology for safe and simple
kitchen planning.
• versatile planning: in a floating
effect or as a lay-on
• planning safety:
– the perfect solution for any
requirement
– increased stability on wider base
units and hob cut-outs
• integration of all bowl and sink
models
WORKTOPS
Stainless steel satin polish and satin matt finish
with SolidEdge
Worktops stainless steel satin polish and
satin matt finish with SolidEdge
Worktops stainless steel SolidEdge overlap 25 mm
(price per running metre)
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
Worktops stainless steel SolidEdge overlap 35 mm
(price per running metre)
SE11/25*
SE11/35*
SE20/25
SE20/35
SE30/25
SE30/35
Order
Code
Order
Code
Order
Code
SE11/25*
SE20/25
SE30/25
ES0400
ES0401
ES0402
ES0403
ES0404
ES0405
ES0406
ES0407
ES0408
ES0409
ES0410
ES0411
ES0412
ES0413
ES0414
ES0415
ES0416
ES0417
ES0418
ES0419
ES0420
ES0421
ES0422
ES0423
Order
Code
Order
Code
Order
Code
SE11/35*
SE20/35
SE30/35
20
Stainless steel SolidEdge
Edge thickness 6 mm, slightly chamfered on one side. Second,
third and fourth edges not processed. Underside completely
bonded with substrate (grey) coated on all sides and all-round
edge band (anthracite – RAL 7015).
Max. length: 3800 mm. Other dimensions on request.
Min. calculation base: 500 mm.
Choice of satin polish or satin matt.
6
35
up to 600 mm deep
up to 650 mm deep
up to 700 mm deep
up to 800 mm deep
up to 900 mm deep
up to 1000 mm deep
up to 1100 mm deep
up to 1200 mm deep
ES0440
ES0441
ES0442
ES0443
ES0444
ES0445
ES0446
ES0447
ES0448
ES0449
ES0450
ES0451
ES0452
ES0453
ES0454
ES0455
ES0456
ES0457
ES0458
ES0459
ES0460
ES0461
ES0462
ES0463
* Please observe the information on page 48/49.
18
WORKTOPS
Stainless steel satin polish and satin matt finish with SolidEdge
Edge-version
(price per running metre)
Order
Code
additional edge specification SolidEdge overlap 25 mm
for side / back edges
additional edge specification SolidEdge overlap 35 mm
for side / back edges
ES0430
ES0431
Stainless steel worktops
satin polish and satin matt
Cut-outs and slopes
EL0125
EL0126
EL0127
EL0128
Cut-out for integrated hob or sink*
Corner cut-out (without edge finishing)
Slope (without edge finishing)
Sloped corner cut-out (without edge finishing)
Drill hole for tap up to Ø 36 mm
Connections
SR0001
SR0002
90° screw connection
45° screw connection
Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options.
Further technical details see page 46/47.
* Please specify cut-out details.
For hobs please include manufacturer’s cut-out data specification.
Cut-outs and slopes
Cut-out for integrated hob
or sink
Doubling of worktops with
thickness < 31 mm
Corner cut-out (only without
edge finishing)
Slope (without edge finishing)
90° screw connection
bottom view
90° screw connection
for 12-15.5 mm thin worktops
top view
90° screw connection
for 12-15.5 mm thin worktops
bottom view
Sloped corner cut-out
(only without edge finishing)
Connections
Planning recommendation for fronts with integrated strip handles
base unit
height base unit
base unit
height base unit
door front
Planning recommendation for worktops with a front-aligned specification
door front
90° screw connection
top view
Planning information
• Please indicate which sides are visible.
• If the indicated maximum lengths are exceeded, then a screw connection is to be included. See also page 46.
• The minimum worktop thickness is 11 mm. Information on thin worktops is given on pages 48/49.
19
SPECIFICATIONS
Weld-in bowls stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R10
BLANCO CLARON 180
Dimensions
Scope of supply
Bowl 180 x 400 x 130 mm with 3½"
basket strainer and waste kit.
Order
Code
BE0237
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO CLARON 340
Bowl 340 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0238
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO CLARON 400
Bowl 400 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0239
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO CLARON 450
Bowl 450 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0240
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO CLARON 500
Bowl 500 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0241
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
20
SPECIFICATIONS
Weld-in bowls stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R10
R1
0
550
Bowl 550 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0254*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
85
min.40
Order
Code
Scope of supply
400
BLANCO CLARON 550
Dimensions
BLANCO CLARON 700
Bowl 700 x 400 x 190 mm with 3½"
basket strainer and waste kit.
BE0242
BLANCO CLARON 550-T
Drainer 550 x 400 x 18 mm with 1½"
basket strainer (not to close),
incl. waste fitting.
Slope of drainer: 10 mm - 17 mm.
BE0243
BLANCO CLARON with
the tap ledge lowered**
Bowl 457 x 432 x 175 mm with 3½"
basket strainer and overflow imprint and
2 tap holes of 35 mm diameter, including
manual waste and overflow fitting.
Level of worktop to tap ledge: 35 mm
Recommended mixer tap:
BLANCO ELOSCOPE-F II
BE0263**
Bowl 550 x 332 x 190 mm with 3½"
basket strainer and waste kit.
BE0255*
R1
0
550
min.40
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
85
332
BLANCO CLARON 550
Steamer Edition
Specifications
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Optional accessories for BLANCO CLARON
BLANCO CARRIER
stainless steel tray, to take up
GN containers, suitable for
CLARON 550 Steam Edition
223 166
Walnut bridging chopping
board, for worktop and table,
suitable for CLARON 550
Steam Edition
515 914
Stainless steel colander,
suitable for all CLARON main
and additional bowls
219 649
Cutting board, white
satinised glass, stackable
on colander 420 x 200 mm
225 335
Stainless steel drainer,
suitable for all CLARON
main bowls
219 650
stackable on drainer
420 x 240 mm
225 333
Wooden chopping board,
Walnut with stainless steel
handle, to match bowls of
CLARON
223 074
Planning information
• BLANCO CLARON bowls are available in either satin polish or satin matt.
• Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow.
• * If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out (see page 46).
• ** Due to the step height of 35 mm, a pop-up is not recommended. If required, please order the pop-up waste with a round knob (overview on page 40).
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
21
SPECIFICATIONS
Weld-in sinks stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R10
Dimensions
Order
Code
Scope of supply
BLANCO CLARON 180/395-T
Bowl 180 x 400 x 130 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0247*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 13 mm - 20 mm.
BLANCO CLARON 340/380-T
Bowl 340 x 400 x 190 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0248*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 13 mm - 20 mm.
BLANCO CLARON 450/490-T
Bowl 450 x 400 x 190 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0249*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 13 mm - 20 mm.
Planning information
• *For use in thin worktops, please observe the technical planning information (product data sheet see page 48/49)
• BLANCO CLARON bowls are available in either satin polish or satin matt.
• Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow.
Optional accessories for BLANCO CLARON
Stainless steel
colander, suitable for
all CLARON main and
additional bowls
219 649
Cutting board
stackable on colander
219 644
Wooden chopping
board, Walnut with
stainless steel handle,
to match bowls of
CLARON
223 074
BLANCO CapFlow™
Outlet cover for bowls
with 3 1/2" basket
strainer
517 666
Cutting board,
white satinised glass,
stackable on colander
225 335
Stainless steel
drainer,
suitable for all CLARON
main bowls
219 650
Cutting board
stackable on drainer
219 645
Cutting board,
white satinised glass,
stackable on drainer
225 333
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
22
SPECIFICATIONS
Weld-in sinks stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R10
Order
Code
Scope of supply
Dimensions
BLANCO CLARON 400/T-FLOW one-sided
BLANCO CLARON sink
400 x 400 x 190 mm with a smoothly
tapering drainer on one side.
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0250*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 0 mm - 10 mm.
BLANCO CLARON 400/T-FLOW two-sided
BLANCO CLARON sink
400 x 400 x 190 mm with a smoothly
tapering drainer on both sides.
3½" basket strainer and waste kit.
BE0251*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 0 mm - 10 mm.
BLANCO CLARON sink
500 x 400 x 190 mm with a smoothly
tapering drainer on one side.
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0252*
Specifications
BLANCO CLARON 500/T-FLOW one-sided
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 0 mm - 10 mm.
BLANCO CLARON 500/T-FLOW two-sided
BLANCO CLARON sink
500 x 400 x 190 mm with a smoothly
tapering drainer on both sides.
3½" basket strainer and waste kit.
BE0253*
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 0 mm - 10 mm.
Planning information
• *For use in thin worktops, please observe the technical planning information (product data sheet see page 48/49).
• Note the special dimensions of BLANCO CLARON T-FLOW. Please discuss the technical details and planning options with your competent
STEELART contact.
• BLANCO CLARON T-FLOW sinks are available in either satin polish or satin matt.
• BLANCO CLARON T-FLOW sinks cannot be welded in BLANCO Durinox® worktops.
Optional accessories for BLANCO CLARON T-FLOW
Stainless steel
colander, suitable for
all CLARON main and
additional bowls
219 649
Cutting board,
white satinised glass,
stackable on colander
225 335
Cutting board
stackable on colander
219 644
Stainless steel drainer,
suitable for all CLARON
main bowls
219 650
Cutting board,
white satinised glass,
stackable on drainer
225 333
Cutting board
stackable on drainer
219 645
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
23
SPECIFICATIONS
Weld-in bowls stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R0
Dimensions
Scope of supply
BLANCO ZEROX 180
Bowl 180 x 400 x 130 mm with
3½" basket strainer and waste kit.
Order
Code
BE0221
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO ZEROX 340
Bowl 340 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0222
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Bowl 400 x 400 x 175 mm with
3½" basket strainer and waste kit.
BLANCO ZEROX 400
BE0223
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Bowl 450 x 400 x 175 mm with
3½" basket strainer and waste kit.
BLANCO ZEROX 450
BE0224
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO ZEROX 500
Bowl 500 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0225
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
550
Bowl 550 x 400 x 175 mm with
3½" basket strainer and waste kit.
min.40
BLANCO ZEROX 700
BE0256**
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
85
400
BLANCO ZEROX 550
Bowl 700 x 400 x 185 mm with
3½" basket strainer and waste kit.
BE0229
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
24
SPECIFICATIONS
Weld-in bowls stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R0
Dimensions
BLANCO ZEROX 550-T
Scope of supply
Order
Code
Drainer 550 x 400 x 18 mm with
1½" basket strainer (not to close),
incl. waste kit.
BE0226
Bowl 180 x 400 x 130 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0244*
Slope of drainer: 11 mm - 18 mm.
BLANCO ZEROX 180/395-T
Matching pop-up waste not included
in scope of supply. Please order
separately.
Slope of drainer: 13 mm - 20 mm.
Bowl 340 x 400 x 175 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0245*
Specifications
BLANCO ZEROX 340/380-T
Matching pop-up waste not included
in scope of supply. Please order
separately.
Slope of drainer: 13 mm - 20 mm.
BLANCO ZEROX 450/490-T
Bowl 450 x 400 x 175 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
BE0246*
Matching pop-up waste not included
in scope of supply. Please order
separately.
Slope of drainer: 13 mm - 20 mm.
Planning information
• *For use in thin worktops, please observe the technical planning information (product data sheet see page 48/49).
• **If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out. (see page 46).
• BLANCO ZEROX bowls are available in either satin polish or satin matt. Special sizes on request.
• Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow.
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
25
SPECIFICATIONS
Weld-in sinks stainless steel satin polish and satin matt finish
Weld-in sinks
Bowl radius R10
Dimensions
Order
Code
Scope of supply
BLANCO DIVON II 45 S
Bowl 368 x 370 x 195 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
SP0226
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 9 mm - 14 mm.
BLANCO DIVON II 5 S
Bowl 450 x 370 x 195 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
SP0224
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 9 mm - 14 mm.
BLANCO DIVON II 6 S
Bowls 350 x 370 x 195 mm and
170 x 370 x 135 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
SP0225
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 9 mm - 14 mm.
BLANCO DIVON II 8
Bowls 368 x 370 x 195 mm,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
SP0227
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
BLANCO DIVON II 8 S
Bowls 350 x 370 x 195 mm with drainer,
3½" basket strainer and waste kit.
Available as a left- or right-hand version.
SP0228
Matching pop-up waste not included
in scope of supply. Please order
separately (overview see page 40).
Slope of drainer: 9 mm - 14 mm.
Planning information
• BLANCO DIVON II sinks are only available in a satin polish finish.
Optional accessories for BLANCO DIVON II and BLANCO ANDANO
BLANCO DIVON II
Stainless steel colander
to match DIVON additional
and main bowls
231 396
BLANCO DIVON II
glass chopping board
silver, made of safety
glass
230 970
BLANCO CapFlow™
Outlet cover for bowls
with 3 1/2" basket
strainer
517 666
BLANCO ANDANO
Ash compound
chopping board
230 700
BLANCO ANDANO
glass cutting board
227 697
BLANCO ANDANO
stainless steel colander
227 692
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
26
SPECIFICATIONS
Weld-in bowls stainless steel satin polish and satin matt finish
Weld-in bowls
Bowl radius R22
BLANCO ANDANO 180
Dimensions
Scope of supply
Bowl 180 x 400 x 130 mm with 3½"
basket strainer and overflow imprint.
Order
Code
BE0259
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
BLANCO ANDANO 340
Bowl 340 x 400 x 190 mm with 3½"
basket strainer and overflow imprint.
BE0260
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
BLANCO ANDANO 400
Bowl 400 x 400 x 190 mm with 3½"
basket strainer and overflow imprint.
BE0261
BLANCO ANDANO 450
Bowl 450 x 400 x 190 mm with 3½"
basket strainer and overflow imprint.
Specifications
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
BE0266
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
BLANCO ANDANO 500
Bowl 500 x 400 x 190 mm with 3½"
basket strainer and overflow imprint.
BE0262
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
BLANCO ANDANO 700
Bowl 700 x 400 x 190 mm with 3½"
basket strainer and overflow imprint.
BE0267
The matching pop-up is not
included in the scope of delivery.
If required, please order the retrofit
set with pop-up separately
(overview see page 40).
Planning information
• BLANCO ANDANO bowls are only available in a satin polish finish.
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
27
SPECIFICATIONS
Weld-in bowls stainless steel
Weld-in bowls
Bowl radius R60
Dimensions
Scope of supply
Order
Code
BLANCO SUPRA 180
Bowl 180 x 340 x 130 mm with
3½" basket strainer and waste kit.
BE0202
BLANCO SUPRA 340
Bowl 340 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0209
BLANCO SUPRA 400
Bowl 400 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0206
BLANCO SUPRA 450
Bowl 450 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0207
BLANCO SUPRA 500
Bowl 500 x 400 x 175 mm with
3½" basket strainer and waste kit.
BE0208
BLANCO SUPRA 550-T
Drainer 550 x 400 x 18 mm with
1½" basket strainer (not to close),
incl. waste kit.
BE0211
Planning information
• BLANCO SUPRA bowls are only available in a satin polish finish.
• Other BLANCO bowl and sink designs are available on request. Please contact your local STEELART partner.
The bowls shown here are only available welded into a STEELART stainless steel worktop.
The cut-out and the welding are included in the price.
28
Accessories
Specifications
Weld-in elements
Optional accessory for CLARON, ZEROX and DIVON II weld-in elements
Stainless steel
colander, suitable for all
CLARON / ZEROX main
and additional bowls
219 649
Cutting board
stackable on colander,
suitable for all CLARON /
ZEROX main and additional
bowls
420 x 200 mm
219 644
Cutting board,
white satinised glass,
stackable on colander,
suitable for all CLARON /
ZEROX main and additional
bowls
420 x 200 mm
225 335
Stainless steel
drainer, suitable for
all CLARON / ZEROX
main bowls
219 650
Cutting board
stackable on drainer,
suitable for all CLARON /
ZEROX main bowls
420 x 240 mm
219 645
Cutting board,
white satinised glass,
stackable on drainer,
suitable for all CLARON /
ZEROX main bowls
420 x 240 mm
225 333
Wooden chopping board
walnut with stainless steel
handle, to match bowls
of CLARON / ZEROX,
stackable on lay-on drainer
223 074
BLANCO DIVON II
Stainless steel colander
to match DIVON additional
and main bowls
222 900
BLANCO DIVON II
glass chopping board
silver, made of safety glass
230 970
BLANCO CapFlow
Outlet cover CapFlow
517 666
29
LATERAL PANELS
Stainless steel satin polish and satin matt finish
Stainless steel lateral panel
Trims in thicknesses
12.5 / 21.5 / 31.5 / 40.5 mm
Panel 50 mm
Panel 100 mm
Stainless steel lateral trims for
island solutions
Glued evenly over entire surface,
inside at front and back of trim folded
up to 15 mm and annex by 105 mm.
No height adjustment.
Stainless steel lateral panels for
island solutions
Glued evenly over entire surface, inside
of panel covered to 105 mm at front and
back.
Choice of satin polish or satin matt.
Panel for island solution
Order Code
reversible
Order Code
reversible
Order Code
reversible
up to 500 mm deep
up to 700 mm deep
up to 900 mm deep
up to 1100 mm deep
up to 1300 mm deep
EW045
EW046
EW047
EW048
EW049
EW070
EW071
EW072
EW073
EW074
EW080
EW081
EW082
EW083
EW084
EW142 EW142
EW140 EW140
EW141 EW141
EW201 EW201
EW201 EW201
EW201 EW201
Edge specification
Chamfer (add. price per panel)
Optional
Stainless steel cover on complete inside
of panel
Further technical details see page 46/47.
30
LATERAL PANELS
Stainless steel satin polish and satin matt finish
Stainless steel lateral panel
Trims in thicknesses
12.5 / 21.5 / 31.5 / 40.5 mm
Panel 50 mm
Panel 100 mm
Stainless steel lateral trims for in-line
and full-length cabinets
Glued evenly over entire surface, inside
at front of trim folded up to 15 mm and
annex by 105 mm. No height adjustment.
Stainless steel lateral panels for in-line
and full-length cabinets
Glued evenly over entire surface, inside of
panel covered to 105 mm at front.
Choice of satin polish or satin matt.
Panel for in-line and full-length cabinets
Order Code
reversible
Order Code
right
left
up to 1000 mm deep
up to 1200 mm deep
up to 1400 mm deep
up to 1600 mm deep
up to 1800 mm deep
up to 2000 mm deep
up to 2200 mm deep
up to 2400 mm deep
EW090
EW091
EW092
EW093
EW094
EW095
EW096
EW097
EW001
EW002
EW003
EW004
EW005
EW006
EW007
EW008
EW152 EW152
EW150 EW150
EW151 EW151
EW201 EW201
EW201 EW201
EW201 EW201
EW009
EW010
EW011
EW012
EW013
EW014
EW015
EW016
Order Code
right
left
EW017
EW018
EW019
EW020
EW021
EW022
EW023
EW024
EW025
EW026
EW027
EW028
EW029
EW030
EW031
EW032
Edge specification
Chamfer (add. price per panel)
Optional
Stainless steel cover on complete inside
of panel
Lateral, back and
front panels
Further technical details see page 47.
Stainless steel table with panel legs
One-piece tables with welded panel
legs are available on enquiry.
31
BACK PANELS
Stainless steel satin polish and satin matt finish
Stainless steel back panels
Stainless steel
Back panel with sealing tape on top and bottom.
Sides covered with stainless steel.
Max. size: 3800 x 1200 mm.
Choice of satin polish or satin matt finish.
Back panel stainless steel
Minimum calculated amount per piece
Price per square metre
Radius R1
Radius R3
Order
Code
Order
Code
RW0103
RW0104
RW0110
RW0111
RW0110
RW0111
RW0126
RW0130
RW0135
RW0127
RW0132
RW0126
RW0130
RW0135
RW0127
RW0132
Edge design
Additional edging on 3rd side (corners welded)
Additional edging on 3rd and 4th sides (all sides closed)
Cut-outs and slopes
Corner cut-out (without edge finishing)
Centre cut-out (without edge finishing)
Cut-out for connections
Slope (without edge finishing)
Curve (with edge finishing)
Cut-outs and slopes
Corner cut-out
(without edge finishing)
32
Centre cut-out
(without edge finishing)
Cut-out for connections
Slope (without edge finishing)
Curve (with edge finishing)
FRONT PANELS
Stainless steel satin polish and satin matt finish
Stainless steel front panel
Front panel stainless steel
Minimum calculated amount per piece
Price per square metre
Radius R1
Radius R3
Order
Code
Order
Code
FB0103
FB0104
Lateral, back and
front panels
Stainless steel
The front panel is closed on all sides.
Max. size: 2500 x 1200 mm.
Choice of satin polish or satin matt finish.
33
The fascination of system design.
Harmonious match in form and finish.
34
BLANCO STEELART system
design – control elements with tap,
soap dispenser and pop-up to
match the STEELART sink centre.
They appeal for their continuous
design and the unique surface
match between the control
elements and the characteristic
STEELART stainless steel surfaces.
The STEELART system accessory
Mixer taps, Control elements,
Accessories
with a design-orientated lay-on
drainer and large chopping board
in high-quality walnut appeals for
its innovative technology and
elegant looks.
35
Control elements in
STEELART system design
BLANCOCULINA-S Duo
System design with professional standards.
• CLARON system design
• Exclusive design mixer tap
• Separate control element to
position freely
• Comfortable locking of the hose
with a precise magnetic holder
• Spray in high-quality metal
• Perfectly matched to STEELART
bowls, especially BLANCO CLARON
BLANCOCULINA-S Duo
Stainless steel satin matt
Stainless steel satin polish
Chrome
Mixer tap with spray
BLANCOCULINA-S Duo
High pressure
Stainless steel satin matt
519 784
BLANCOCULINA-S Duo
High pressure
Stainless steel satin polish
519 783
BLANCOCULINA-S Duo
High pressure
Chrome
519 782
Soap dispenser
BLANCO PIONA
Stainless steel satin matt
515 992
BLANCO PIONA
Stainless steel satin polish
515 991
BLANCO PIONA
Chrome
517 667
You will find the matching pop-up on page 40.
36
BLANCO LINEE
Clear. Uncompromising. Consistent.
Control elements in
STEELART system design
BLANCO LINEE
Stainless steel satin matt
Stainless steel satin polish
Chrome
Mixer tap
BLANCO LINEE
High pressure
Stainless steel satin matt
517 596
BLANCO LINEE
High pressure
Stainless steel satin polish
517 595
BLANCO LINEE
High pressure
Chrome
517 594
Mixer tap with spray
BLANCO LINEE-S
High pressure
Stainless steel satin matt
517 593
BLANCO LINEE-S
High pressure
Stainless steel satin polish
517 592
BLANCO LINEE-S
High pressure
Chrome
517 591
Soap dispenser
BLANCO PIONA
Stainless steel satin matt
515 992
BLANCO PIONA
Stainless steel satin polish
515 991
BLANCO PIONA
Chrome
517 667
Mixer taps, Control elements,
Accessories
• CLARON system design
• Consistently clear shapes
• High spout, also available with
high-quality metal pull-out spray
• Perfectly matched to STEELART
bowls, especially BLANCO CLARON
You will find the matching pop-up on page 40.
37
Control elements in
the 10-mm radius look
BLANCO LEVOS
Perfect elegance
• CLARON system design
• Consistently elegant shapes
• High spout with high-quality
pull-out spray
• Perfectly matched to STEELART
bowls, especially BLANCO CLARON
BLANCO LEVOS
Stainless steel satin matt
Stainless steel satin polish
Chrome
Mixer tap with spray
BLANCO LEVOS-S
High pressure
Stainless steel satin matt
514 919
BLANCO LEVOS-S
High pressure
Stainless steel satin polish
514 918
BLANCO LEVOS-S
High pressure
Chrome
514 917
Soap dispenser
BLANCO LEVOS
Stainless steel satin matt
517 587
BLANCO LEVOS
Stainless steel satin polish
517 586
BLANCO LEVOS
Chrome
517 585
You will find the matching pop-up on page 40.
38
BLANCO QUADRIS
Control elements in the familiar
ZEROX look
Consistently linear
BLANCO QUADRIS
Stainless steel satin matt
Stainless steel satin polish
Chrome
Mixer tap with spray
BLANCO QUADRIS-S
High pressure
Stainless steel satin polish
514 608
BLANCO QUADRIS-S
High pressure
Stainless steel satin polish
514 607
BLANCO QUADRIS-S
High pressure
Chrome
514 606
Soap dispenser
BLANCO QUADRIS
Stainless steel satin matt
517 590
BLANCO QUADRIS
Stainless steel satin polish
517 589
BLANCO QUADRIS
Chrome
517 588
Mixer taps, Control elements,
Accessories
• ZEROX system design:
• Consistently linear shapes
• Steep spout, also available with
high-quality pull-out spray
• Perfectly matched to STEELART
bowls, especially BLANCO ZEROX
You will find the matching pop-up on page 40.
39
POP-UPS
Model
Stainless steel satin matt
Stainless steel satin polish
Chrome
BLANCO QUADRIS Pop-up
Pop-up
Stainless steel satin matt
221 943
Pop-up
Stainless steel satin polish
221 942
Pop-up
Chrome
221 902
BLANCO LEVOS Pop-up
Pop-up
Stainless steel satin matt
221 941
Pop-up
Stainless steel satin polish
221 940
Pop-up
Chrome
221 901
Pop-up round
Pop-up
Stainless steel satin matt
222 118
Pop-up
Stainless steel satin polish
222 115
Pop-up
Chrome
221 339
Pop-up control
Pop-up control
Stainless steel round
119 293
40
ACCESSORIES
Accessories
Cutting board
stackable on colander
suitable for all CLARON /
ZEROX main and additional
bowls
219 644
Cutting board, white
satinised glass, stackable
on colander suitable for all
CLARON / ZEROX main
and additional bowls
420 x 200 mm
225 335
Cutting board,
white satinised glass,
stackable on drainer
suitable for all CLARON /
ZEROX main bowls
420 x 240 mm
225 333
Wooden chopping board
Walnut with stainless steel
handle, to match bowls of
CLARON / ZEROX stackable
on lay-on drainer
223 074
Lay-on drainer
in stainless steel for all
CLARON / ZEROX single
and double bowls
223 067
Stainless steel drainer,
suitable for all CLARON /
ZEROX main bowls
219 650
BLANCO CapFlow™
Outlet cover for bowls
with 3½" basket
strainer
517 666
Cutting board
stackable on drainer
suitable for all CLARON /
ZEROX main bowls
219 645
BLANCO CapFlow™
in Durinox® finish
Outlet cover for bowls
with 3½" basket
strainer
520 291
Mixer taps, Control elements,
Accessories
Stainless steel colander,
suitable for all CLARON /
ZEROX main and additional
bowls
219 649
Set with wooden chopping board and lay-on drainer:
516 185
Bowl connection 2 x 3½"
if using 2 bowls with 3½"
basket strainers
225 088
Bowl connection 3 x 3½"
or 2 x 3½" - 1 x 1½"
if using 3 bowls with 3½"
basket valves or 2 bowl
with 3½" basket valve and
1 drainer with 1½" valve
225 089
Bowl connection 2 x 3½"
or 1 x 3½" - 1 x 1½"
if using 2 bowls with 3½"
basket valves or 1 bowl
with 3½" basket valve and
1 drainer with 1½" valve
225 087
41
Stainless steel work surfaces:
the material, cleaning and care.
BLANCO STEELART stainless steel worktops are manufactured from high-quality nickel-chromium steel.
Stainless steel is the classic material and its material property means that it offers almost boundless design
options. The seamless integration of sinks and additional functional elements creates the elegant impression
that everything is cast in a single piece.
The advantages at a glance:
• Exclusive, aesthetically appealing, timeless and easy to combine
• Hygienic surface
• Suitable for contact with food and resilient against common household acids and alkalis
• Anti-corrosive
• Easy to clean
BLANCO STEELART offers stainless steel work surfaces in three different finishing qualities:
BLANCO Durinox®, satin polish and satin matt finish.
The main differences relate to the use and maintenance characteristics, as well as to the degree of shine.
Find out more on the following pages.
42
MATERIAL CHARACTERISTICS
BLANCO Durinox®
The material characteristics:
• Unique material innovation: specially finished stainless steel surface in
velvety-matt look with a homogenous structure
• Extremely scratch-resistant: more than twice as hard as conventional
stainless steel surfaces
• Impervious to fingerprints in comparison to conventional stainless steel surfaces
STEELART stainless steel Satin Polish and Satin Matt
The material characteristics:
• Satin polish stainless steel: maximum shine with a linear finish
• Satin matt stainless steel: matt finish
• Not scratch-resistant: every stainless steel surface shows
signs of use, known as a "patina", over time.
• Regular maintenance, e.g. using BLANCO POLISH, makes the
surface increasingly robust: scratches merge into the surface;
the surface becomes less impervious to fingerprints.
satin polish surface
satin matt surface
• Thanks to its smoother texture, the finely brushed surface
BLANCO STEELART Satin Polish is easier to clean and care for
than the more roughly sand brushed surface BLANCO STEELART
Satin Matt.
Tips for everyday use:
• Under unfavourable conditions, objects which fall onto the work surface can damage the surface.
• Do not place excessively hot saucepans or pans directly on the worktop.
• Do not cut food directly on the worktop, in order to prevent deep scratch marks. We recommend
our cutting boards which are available as optional extras for this purpose.
• Avoid sliding hard or sharp-edged objects (e.g. heavy cooking utensils) over the worktop.
General cleaning and maintenance recommendations for STEELART stainless steel worktops:
• Avoid cleaning agents containing chloric and hydrochloric acid.
• Regularly remove dirt and limescale deposits.
• Avoid direct, prolonged contact with rusting iron objects (e.g. cast iron pans).
43
Advice and Service
Technical information
• Do not use steel wool, only sponges for stainless steel (soft side).
Cleaning and Care.
Stainless steel surfaces satin polish and satin matt.
1. Deep cleaning (for satin polish surface finishes)
2. Day-to-day cleaning:
We recommend that you clean and care for your
A soft sponge or a damp cloth together with a normal
worktop every 1-2 weeks with BLANCO POLISH.
cleaning agent are sufficient for daily cleaning.
BLANCO POLISH makes daily cleaning easier and
removes heavy dirt and limescale deposits.
To remove limescale you may also use cleaning agents
containing vinegar or lemon juice.
It seals the surface (water repellent property) and
BLANCO household tip: Clean with vinegar water
removes slight signs of wear and tear (scratches).
(20% vinegar, 80% water) or with lemon juice dissolved
in water.
BLANCO POLISH:
• Removes scratches
• Removes rust, marks and stains
• Water just rolls off the surface after use
• Prevents finger prints and other marks
and dirt from settling
• Leaves a satin matt shine
Special information
• Always clean in the direction of the grain and never
in a circular motion because this can cause lasting
changes to the structure of the surface.
• Intensive polishing of one point produces local
changes to the degree of shine (especially with satin
Care kit for stainless steel
worktops, consisting of:
1 x BLANCO microfibre cloth
1 x BLANCO POLISH
matt finish).
• Avoid cleaning agents containing chloric and
hydrochloric acid.
• Regularly remove dirt and limescale deposits.
1 x VILEDA sponge scratchless
• Avoid direct, prolonged contact with rusting iron
Order Code: 118 009
objects (e.g. cast iron pans).
• Do not use steel wool, only sponges for stainless steel
(soft side).
44
Cleaning and Care.
BLANCO Durinox® stainless steel surfaces.
1. Deep cleaning
BLANCO Durinox® Liquid is a special deep cleaner.
It removes serious dirt and limescale deposits, and makes
We recommend deep-cleaning the worktop before using
it for the first time, and after that every 3 – 4 weeks.
1. Apply a few drops of undiluted BLANCO Durinox® Liquid to
a soft sponge (e.g. the stainless steel sponge by VILEDA).
2. Clean the worktop using circular movements and with
pressure on the surface.
daily cleaning easier.
BLANCO Durinox® Liquid:
• Loosens rust, marks and stains
• Makes it easier to remove fingerprints
BLANCO Durinox® Liquid – 250 ml bottle
Order code 520 833
3. Then remove all traces of the cleaning product and
loosened dirt from the stainless steel surface with a
microfibre cloth and plenty of water.
4. Wipe the worktop dry with a clean cotton or microfibre
cloth.
BLANCO Durinox® Care Set
for Durinox® stainless steel worktops, consisting of:
1 x microfibre cloth
1 x BLANCO Durinox® Liquid 250 ml
1 x sponge, non-scratch
Order code 520 836
2. Daily cleaning
All that is required for daily cleaning is a soft sponge or
damp microfibre cloth. To remove limescale and light dirt,
you can also use BLANCO Durinox® Liquid or a vinegar
Special information
Do not use any abrasive scouring products (e.g. scouring
milk, scouring powder, BLANCO POLISH) to clean
BLANCO Durinox® stainless steel surfaces.
45
Advice and Service
Technical information
or lemon cleaner.
TECHNICAL INFORMATION
Stainless steel worktops
Chamfer
Weld-in bowls
550 series
Different chamfering is recommended for edge
thicknesses to 21 mm and edge thicknesses
> 21 to 100 mm.
BLANCO CLARON 550 + 550-T
If fitting a 550 model in a 60-cm wide base unit,
the side panels will have to be cut out.
BLANCO ZEROX 550 + 550-T
If fitting a 550-T model in a 30-cm wide base unit,
the side panels will have to be cut out, too.
Screw connection 90°
– Worktops from 12 to 15.5 mm
thickness
– Minimum distance to welded items 80 mm.
– When two worktops abut with opposing
grinding directions, this may create the effect
of them having different surfaces.
top view
bottom view
top view
bottom view
top view
bottom view
top view
bottom view
– Worktops from 21 to 100 mm
thickness
Screw connection 45°
– Worktops from 12 to 15.5 mm
thickness
– Worktops from 21 to 100 mm
thickness
46
TECHNICAL INFORMATION
Stainless steel worktops and lateral panels
Worktops
> 31 mm
Cut-out for inset hob or sink
– Cut-out for flush-mount installation possible
(please enclose sketch of fitting).
– On worktops with an edge thickness of
< 31 mm, the edge area for hob cut-outs is
doubled. Special angles stabilise the worktop.
– Worktops SolidEdge: minimum distance of
cut-out to edge (front / side) 65 mm
Worktops
< 31 mm
– The cut-out is based on the stainless steel,
not on the core material.
– Please observe the manufacturer's instructions
for installation.
for in-line and
full-length cabinets
Lateral trims 12.5 - 40.5 mm
for island solutions
– No height adjustment on lateral trims
(12.5 – 40.5 mm).
– With height adjustment for uneven floors
(+ 10 mm) for panels with 50 mm and 100 mm
thickness.
– The panels are fitted on-site. We recommend
sealing the underside with silicone.
– Other dimensions available on request.
Lateral panels 50 mm
– The chamfer width of the panel is based on
the chamfer width of the worktop (2.5 mm or
3.5 mm).
– Screw attachment to on-site base units
(no supporting function).
– Needs to be discussed and approved in
advance if used with free standing panels.
47
Advice and Service
Technical information
Lateral panels 100 mm
PRODUCT DATA SHEET
for stainless steel worktops 11, 12 mm and 15.5 mm (R1, R3, Chamfer, SolidEdge)
PRODUCT SPECIFICATION
Worktop made of stainless steel for
a material thickness of 12 mm
(A12UR1)
a material thickness of 11 mm
(SE11/25)
+1
15.5
10.2
13.7
R1
R1
12+1
a material thickness of 15.5 mm
(A15,5UR1)
The following points have to be taken into consideration when planning worktops of a thickness of 11 / 12 / 15.5 mm:
1. Base units
Base units need to provide
a support on all 4 sides.
2. Maximum possible overlap*
Cabinets are to be
aligned levelly.
In the event of an order, detailed drawings including
cabinets will be required.
* If the worktop is extra deep, then a bracket must be provided
on-site for attachment.
3. Maximum of free-standing worktop
4. Dishwasher
Drainers cannot be positioned on top of a dishwasher
48
PRODUCT DATA SHEET
for stainless steel worktops 11, 12 mm and 15.5 mm (R1, R3, Chamfer, SolidEdge)
5. Integration of hob cut-outs
The hob cut-out is underglued with a double
chipboard. Depending on the undermount situation,
this double-up may have to be adjusted on-site.
Cupboard cross braces need to be processed and
adjusted on-site. (Specifications on SolidEdge see page 47).
Double-up (A : A)
80 mm
80 mm
The first drawer is inoperable due
to doubled frame.
Due to the doubled frame it is impossible to install an
oven directly under the hob cut-out.
Oven
impossible
6. Integration of profiled edges as functional element
The profiled edges P8C/P8Z can only
be established as limited zone
(max. 1000 mm x 500 mm) around the sinks.
7. Transport
The worktop has to be transported only uprightly.
Please also observe the information on the packaging.
49
Advice and Service
Technical information
top
NOTES
50
© Copyright BLANCO GmbH + Co KG 2014
51
www.blanco-germany.com
4641/ENG/12-14 KRD SAP 191900 © BLANCO GmbH + Co KG 2014 All rights reserved. Subject to alterations and errors without notice. Slight deviations in colour are possible.
www.blanco-steelart.com