Power Supplies - Tresco Lighting

Transcription

Power Supplies
Power Supplies
Commercial Grade Power Supplies
12V DC power supply is equipped with
mounting block that allows for easy
snap-in connections and includes a
standard 110/120V cord and plug.
u042310
Mounting Block
Mounting Block
Worldwide use 100V-240V
Mounting Block
Hole Size, if Needed:
5/8 in.
16 mm
Size, if Needed:
Hole Size, ifHole
Needed:
5/8 in.
5/8 in.
16 mm
Other cord
16 sets
mm available
upon request.
UK
Indicator Light
6 ft.
1.8 m
EU
6 ft.
1.8 m
6 ft.
1.8 m
1/2 in.
13 mm
Size, if Needed:
Hole Size, ifHole
Needed:
1/2 in. 1/2 in.
13 mm 13 mm
6 in.
6 in.
152 mm 152 mm
3-5/16 in.3-5/16 in.
84 mm 84 mm
18W
60W
6 in.
152 mm
3-5/16 in.
84 mm
6
in.
6 in.
152
mm
152 mm
6 in.
6 in.
152 mm152 mm
Mounting Block
4-1/2 in. 4.5 in.
mm
114 mm 114u042310
3-3/4 in. 3-3/4 in.
95 mm 95 mm
One mounting block included. Add mounting blocks
114 mm
4-1/2 in.
5/8 in.
16 mm
Mounting Block
to utilize the full capacity of the power supply.
Features:
Short circuit protection*
12V DC output, constant voltage
Overcurrent protection
Overload protection*
5/8 in.
1 in. 161-1/16
1 in.
mm in.
25 mm 25 mm 27 mm
1-1/16 in.1-1/16 in.
27 mm 27 mm
1-5/8 in. 1-5/8 in.
3/4 in. 3/4 in. 41 mm 41 mm
6 ft.
19 mm 19 mm
Cord 1.8 m
6 ft.
1.8 m
Mounting Block
3/4 in.
19 mm
5/8 in.
16 mm
3-5/16 in.
84 mm
6 ft.
1.8 m
1/2 in.
13 mm
6 in.
152 mm
1-1/16 in.
27 mm
* Automatic reset (no fuses)
All parts included with purchase of power supply.
L-DC-ELT18-CON-1
6 in.
152 mm
Indicator Light
3-5/16 in.
84 mm
1/2 in.
13 mm
6 in.
152 mm
Dimmable on trailing edge (12V side)
Part #
6 in.
152 mm
Mounting Block
50,000 hour life supply
Scan for more info
2 in.
51 mm
RFI protection
Class 2 or LPS
1-1/4 in.
32 mm
Description
3-5/16
in.
84 mm
6 in.
152 mm
1/2 in.
13 mm
3/4 in.
19 mm
4.5 in.
114 mm
6 in.
18W 12VDC Power Supply w/6 Snap Mounting
152 mmBlock
L-DC-ELT60-CON-1
60W 12VDC Power Supply w/6 Snap Mounting Block
L-TRANS-MNT-BL-1
Extra 6-Snap Mounting Block
L-DCT-EUPKT-BL-1
3-3/4
in.
72”27(1.8
Black
mmm) EU Power Cord,
L-DCT-UKPKT-BL-1
72” (1.8 m) UK Power Cord,2Black
in.
1-1/16 in.
95 mm
1-1/4 in.
32 mm
51 mm
3/4and
in. power cord
Dimmable on trailing edge (12V side). Mounting block
are included.
19
mm
Power supply specifications are subject to change
1-800-227-1171 | trescolighting.com
1 in.
25 mm
1-1/16 in.
27 mm
3/4 in.
19 mm
1-5/8 in.
41 mm
1-5/8 in.
41 mm
3-3/4 in.
95 mm
1 in.
25 mm
Power Supplies
12W
1-9/16 in.
40 mm
5 ft.
1.5 m
Mounting Block
6 in.
152 mm
Features:
3/4 in.
21 mm
3-3/8 in.
85 mm
6 in.
152 mm
3-5/16 in.
84 mm
Class 2
All parts included with purchase of power supply.
Part #
Description
L-DC-ELT12-CON-1
12W 12VDC Power Supply w/6 Snap Mounting Block
60W
Wall 12V
Dimmable
Hardwire
DC PowerHardwire
Supply
Features:
60W 12V DC
Magnetic transformer
Class 2 with automatic reset circuit breaker on secondary
No minimum load requirements*
Dimmable by standard LED wall dimmers
Works on ALL Tresco® 12V DC dimmable LED fixture
2-1/4” (57 mm) H x 6” (153 mm) L x 2-5/8” (67 mm) W
Hardwire within unit
Optional mounting block can be hardwired to output
Compatible Tresco Wall
Dimmers on next page.
Part #
Description
L-DC-MGT60-CON-1
*60W 12VDC Wall Dimmable Hardwire Power Supply
* No minimum load when controlled by dimmer, mounting block sold separately.
Power Supplies
All product dimensions and specifications are subject to change without prior notice
Lutron Skylark
Contour C•L™
Dimmer
Lutron Diva® C•L™
Dimmer
120V LED Wall Dimmers
Lutron Diva® C•L™ Dimmer
Large paddle switch with a captive linear-slide dimmer for
a standard designer wallplate opening
Preset dimmer
Offers more reliable dimming performance over standard dimmers
HED™ technology with advanced dimming circuitry designed for
compatibility with most high-efficiency light bulb
Low-end adjustment dial
Compatible with Tresco
12VDC Hardwire Power
Supplies (previous page)
Lutron Skylark Contour C•L™ Dimmer
On/off rocker switch with a captive linear-slide dimmer for a
standard designer wallplate opening
Switch returns light to preset light level
Offers more reliable dimming performance over standard dimmers
HED™ technology with advanced dimming circuitry designed for
compatibility with most high-efficiency light bulb
Low-end adjustment dial
Part #
Description
L-DVCL-153P-WH-1
Lutron Diva® C•L™ Dimmer w/out plate
L-CTCL-153P-WH-1
Lutron Skylark Contour C•L™ Dimmer w/out plate
EquiLine Power Supplies
15W
6W
1-1/4 in.
32 mm
1-1/2 in.
38 mm
1-5/8 in. wide
41 mm wide
1-1/2 in. wide
38 mm wide
3 in.
76 mm
2 -3/4 in.
70 mm
3-5/16 in.
84 mm
1-11/16 in.
43 mm
10’
10’
Features:
Part #
L-DC-ELT6WP-CON-1
6W 12VDC Wall Mount Power Supply w/3 Snap Block
L-DC-ELT15WP-CON-1
15W 12VDC Wall Mount Power Supply w/6 Snap Block
Mounting block and power cord are included with each power supply.
Dimmable on trailing edge (12V side).
Class 2 or LPS
TB-POWERSUPPLIES-1409
Description
Controllers
Controllers
12VDC Rectangular Controllers
IR Motion Sensor
Photo Sensor
Works by human motion
4-Step Touch Dimmer
Energy saving
Activates to “on” when in dark
environment
Great for closets
Children’s furniture (night light)
Blue indicator light to help locate
sensor in the dark
Desks/workstation
Bathrooms (floating vanity
Control the intensity of the light
Showrooms
Hospital
Retail displays
Viewing degree: 100º
Time on: 30 secs if no motion
Safety light
Settings: low-medium-high-off
Mounting Block
How to use Rectangular Controllers
with Tresco 12V DC Systems:
Mounting Block
Adapter Cord*
(other than SimpLED)
Option #1
Starter included
with each controller
Mounting Block
Adapter Cord*
Option #2
Starter included
with each controller
3/8 in.
(10 mm)
Photo
2-3/4 in. (70 mm)
Touch
Motion
4-1/8 in. (105 mm)
3/4 in.
(19 mm)
* Purchase Separate
Part #
Description
L-LED-SMPMOT-1
27W 12VDC Rectangle Inline Motion Sensor
L-LED-SMPPHOTO-1
27W 12VDC Rectangle Inline Photo Sensor
L-LED-SMPTD4-1
27W 12VDC Rectangle Inline Touch Dimmer
L-LED-SMPADP-5-1
2” (5 cm) 12VDC Rectangle Adaptor
L-LED-SMPADP-15-1
L-LED-SMPADP-25-1
L-LED-SMPADP-60-1
L-LED-SMPADP-120-1
L-LED-SMPADP-180-1
*Adaptor must be purchased for proper connecting when not using rectangular
controllers with SimpLED Series.
Controllers
12VDC Oval Controllers
Proximity Controller
Door Sensor Controller
Max wattage: 27W
Sensor range: 2” (50 mm)
Cable input: 79”(2 m)
Cable output: 6” (152 mm)
Finish: Nickel/Black
Max wattage: 27W
Sensor range: 2” (50 mm)
Motion Controller
Dimmer Controller
Max wattage: 27W
Sensor range: 0-5’ (1500 mm)
Max wattage: 27W
* Hold finger down for dimmin
Swipe hand across to turn on/off
Door open: Light on; Door closed: Light off
Turns on when human motion is detected
.
2 in
.
dia
a.
. di
2 in
3
17/
.
8 in
-3/
2
mm
.
2 in
.
dia
a.
ia.
. di
2 in
3
17/
.
8 in
-3/
2
mm
Touch on/off and 0-100% dimming control
.
2 in
Part32#in. d
.
dia
17/
.
8 in
.
-3/
dia
L-LED-OVLTD-**
m2
in.
ia.
. dDescription
2 in
3
17/
n.
/8 i
27W
2-3 12VDC Oval Recess/Surface Mnt. Touch Dimmer
m
m
3
3
61
61
61m 17/32
61
17/
17/
n.
in. L-LED-OVLDS-**
in.
in.
27W 12VDC Oval Recess/Surface Mnt. Door Sensor
.
.
.
8 iProximity
3/8 n. dia
3/8
3/8
dia
dia
-3/
.
.
2
2
2
2
n
n
i
iMotion Controller
i
Dimmer Controller
Controller mm Door
Controller
mm Proximity
mm 7/32
mm
/32 Sensor Controller
/32
1
1
1
1
7
7
6
6
6
6
.
.
.
1
1
1
L-LED-OVLMS-**
Turns on when
Touch on/off27W
and 12VDC Oval Recess/Surface Mnt. Motion Sensor
.
.
. human
.
Door Open - light
on;
a
a Swipe hand across
a
. di
. di
. di
8 in
8 in
8 in
8 in
motion
0-100% dimming control
Door Closed
-3/is detected
-3/ Door
-3-/light off
2 in
2 in
2 in
to turn on/off
2
2
2
3
3
3
/
/
/
7
m
m Door17Sensor Controller
Controller
Dimmer
Diameter:
13mm
(17/32”) Controller
Diameter: 13mm
(17/32”)
1Motion
17
oximity
Controller
27W
12VDC Oval Recess/Surface Mnt. Proximity Sensor
Diameter:
.
mm 13mm (17/32”)
Diameter:
(17/32”)
in. 61m 13mm
in. 61m L-LED-OVLPS-**
Sensor
8 in 61
/8human
Turns on when
Touch
on/off and
Length: 60 mm
(2 3/8”)
Length: 60 mm (2 3/8”)
Open - light2on;
wipe hand across2-3/8Length: 60 mmDoor
-3/ Length: 60 mm (2 3/8”)
(2 Controller
3/8”)
2-3
Motion
m
m
m
motion
is
detected
0-100%
dimming
control
Max
Wattage:
27W
Max
Wattage:
27W
Door
Closed
light
off
Max Wattage: 27W
turn on/off
L-DB1732-1
17/32” (13.5 mm) Drill Bit for Recess Mount
Wattage:
27W
61mDoor Max
61m
61m 13mm
Motion
Controller
Dimmer
Controller
ler
Sensor
Controller
Diameter:
(17/32”)Sensor
13mm (17/32”)Cable input: 2.0 m (79”)
range: Diameter:
0 - 1500 mm
Controller
Diameter: 13mm (17/32”)
Sensor range: 0 - 80
mm (3 1/8”)
ameter: 13mm (17/32”)
Sensor
range:
- 80 mm (3 1/8”)Turns on when human
Touch on/off and degree:
Door Open
- light
on; 0Length:
Length:
100º 60 mm (2 3/8”) Cable output: 152.0 mm (6”)
60 mm (2 3/8”) Cable input:Dimmer
2.0 m Length:
(79”) 60 mm (2 3/8”) Viewing
ngth: 60 mmDoor
(2 3/8”)
**Available
in
Black
(BL)
and
Nickel
(NI)
Cable- light
input:
m Wattage:
(79”) Controller
is detected Dimmer
0-100% dimming
Motion
Closed
off2.0
or Sensor Controller
Max
Wattage:
27W
Maxif Wattage:
27W
Time on:control
30 secs
no motion
Finish: Nickel / Black
Max
27W motion
Cable output:
152.0
mm
(6”)Controller
Controller
ax
Wattage:
13mm (17/32”)
13mm
(17/32”)
Turnsmm
on when
Touch
on/off
and0Diameter:
Cable
output:
152.0
(6”)0 - human
Diameter:
13mm
(17/32”)
r) Open
- light27W
on;
Sensor
range:
- 1500 mm
Cable
input:
2.0 m (79”)
Surface
mount
plate
packaged
with
each
controller.
Cable
input:
2.0
m (79”)
*Hold finger
down
for dimming
Sensor
range:
80Diameter:
mmFinish:
(3 1/8”)
Nickel / Black
nsor
range:
0Length:
- off
80 mm
1/8”)
Length: 60 mm (2 3/8”)
Length:
mm (2
3/8”) Cable
motion
is detected
0-100%
dimming
control
60 (3
mm
(2 3/8”)/Cable
Finish:
Nickel
Black
r Closed
- light
Viewing
degree:
100º 60Cable
output:
152.0 output:
mm (6”)152.0 mm (6”)
input:
2.0 m (79”)
ble input:
2.0(17/32”)
m (79”)
Max
Wattage:
27W
Max
Wattage:
27W
Diameter:
13mm
(17/32”)
Diameter:
13mm
(17/32”)
Max
Wattage: 27W
meter:
13mm
Time
on:
30
secs
if
no
motion
Finish:
Nickel
/
Black
Finish:
Nickel
/
Black
Cable output: 152.0 mm (6”)
mm
input: 2.0 m (79”) *Hold finger down for dimming
ble output:
(6”)0 - 80 mmFinish:
Length:
60 mm
(2Sensor
3/8”) range: 0 - 1500
Length:
mm 2.0
(2Cable
3/8”)
Sensor
range:
(3
1/8”)
gth:
60 mm (2152.0
3/8”)mm
Cable60
input:
m (79”)
Nickel
/ Black
(3 1/8”)
Cablemm
output:
Wattage:
27W
Cable input: 2.0 m (79”) Max Wattage: 27WViewing degree: 100ºMaxCable
ish:
Nickel27W
/ Black
Wattage:
output:
152.0
(6”) 152.0 mm (6”)
3
17/
Time mm
on: 30 secs if noCable
motion
Sensor range: 0 - 1500
input:
2.0 m
(79”) Nickel / Black
Cable
sor range: 0 - 80
mmoutput:
(3 1/8”)152.0 mm (6”)
Finish:
Nickel
/ Finish:
Black
Cable input: 2.0 m (79”)
*Hold
Cable output: 152.0
mmfinger
(6”) down for dimming
le(6”)
input: 2.0 mFinish:
(79”) Nickel / Black
Cable
output:
152.0
mm
(6”)
le output: 152.0 mm (6”)
1-800-227-1171
Cable input: 2.0 mFinish:
(79”) Nickel / Black *Hold finger down for dimming
h: Nickel / Black
Cable output: 152.0 mm (6”)
| trescolighting.com
Controllers
12VDC Remote Control Dimmers
Remote Control LED Dimmers feature radio-frequency, remote-control dimming to adjust lights from anywhere in the
room up to 30’ (9 m). The remote control provides on/off power and dims lights from 100%-1%.
Universal Remote Dimmer
Dedicated Remote Control Dimmer
Controls up to 5A/60W of LED lighting
Controls up to 5A/60W of LED lighting
Features a built-in memory that recalls the last setting when
turned on
Features a built-in memory that recalls the last setting when
turned on
Comes with two remote controls (one extra, as a backup)
No line of sight required
1-5/16 in.
No line of sight required 33 mm
Comes with two remote controls (one extra, as a backup) that are
synchronized to control the same dimmer
Canin.control multiple
dimmers in same room with single
2-1/8
3-3/16 in.
54 mm
81 mm
Can use multiple independently controlled dimmer in the same room
remote control for universal dimming
1-1/8 in.
29 mm
2-1/4 in.
57 mm
1-5/16 in.
33 mm
3-3/16 in.
81 mm
2-1/8 in.
54 mm
•+
•–
INPUT
+•
–•
OUTPUT
1-1/8 in.
29 mm
2-1/4 in.
57 mm
Part #
Description
L-LED-DIMRMT-12V8A-1
LED Dedicated Remote Control Dimmer, 12VDC 96W
L-LED-DIMRMT-12V8A-U-1*
LED Universal Remote Control Dimmer, 12VDC 96W
Both models of the Remote Control LED Dimmer provide on/off power and dim lights
from 100%–1%. The dedicated Remote Control independently controls one specifi
dimmer in a room. The Universal Remote Control (U) controls multiple dimmers in a
room.
*Recommended not to exceed 3 per room
Placement of multiple dimmers in a room may be critical for proper
function depending on set-up and obstacles.
Scan for more info
Controllers
120VDC Manual In-Line Rotary Dimmer
1-1/4 in.
32 mm
4A /48W capacity
79 in.
2m
100-0% dimming and on/off power
79” (2 m) input lead snaps into power supply mounting block with male AMP® connector
8” (203 mm) output connects to run of light with female AMP® connector
Part #
ALL New by LLDescription
1/23/09, based on IL#9
Update caption
to
“Power Supply” for LED Spec Book 111
8 in.
L-LED-DIMCON-BL-1
203 mm LED Black Inline Rotary Dimmer, 12VDC 48W
L-LED-DIMCON-WH-1
LED White Inline Rotary Dimmer, 12VDC 48W
17c. Touch On/Off Switch TS2-72
1-1/4 in.
32 mm
1 in.
25 mm
5/16
6 ft. in.
8 mm
1.8
m
2-1/8 in.
54 mm
8 in. 5 ft.
203 mm 1.5 m
79 in.
2m
s012309 u020209 u010811
79 in.
2m
2-1/2 in.
64 mm
1-9/16 in.
40 mm
14 in.
356 mm
Female receptacle can accept up to
(3) Power Supply plugs (120V ea.)
Touch On/Off Switch
8 in.
203 mm
ALL New
by LL
Controls
12V1/23/09,
Plug-in based on IL#9
Update caption
to “Power Supply” 5/16
for in.
LED Spec Book 111
Power Supplies
8 mm
1 in.
25 mm
17c.
Touch On/Off Switch TS2-72
8 in.
2-1/2 in.
64 mm
203 mm
2-1/8 in.
54 mm
6 ft.
1.8 m
s012309 u020209 u010811
79 in.
2m
1-9/16 in.
40 mm
5 ft.
1.5 m
3-3/8 in.
85 mm
3/4 in.
21 mm
14 in.
356 mm
Female receptacle can accept up to
(3) Power Supply plugs (120V ea.)
Part #
Description
L-TS2-72-1
Touch On/Off w/Cord And Touch Pad. Black, 200W
On/off switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch.
Controllers
12VDC Premiere 8-Zone Dimmer
Take control of your lighting
with the 8-Zone dimmer!
•
•
•
•
•
•
•
2.4 GHz allows up to 100’* range and hidden
receivers (no line of sight required)
Programmable 60W receiver
Control up to 8 zones of lighting
Unlimited receivers per zone
Create unique scenes by combining zones
Power failure memory
Slim design
6.89”
+
6.89”
+
1.73”
1.73”
* Under ideal conditions and fully charged controller
3” (76mm)
3” (76mm)
+
+
6.69”
6.69”
Dimming
25%
50%
2.17” (55mm)
0.87”
0.87” (22mm)
100%
1
2
4
5
2.17”
Recha rge
0.87”
Power Supply
Figure 2
Input Wire
DC-ELT 18
ELT 60
1.73”
+
PROGRAM BUTTON
*Under
access cover
6.69”
+
+
5.7
1”
3”
(76
mm
)
+
9”
Power Supply
2.17”
8
S1
S2
3
6
m
1.73”
2.17”
1
4
7
S1
50%
100%
2
5
8
S2
3
6
*
Recha rge
0.87”
ne
s
%
25
Dim
0.87”
50%
2
5
*
%
ing
1
10
4
ch
S1
7
2
arg
e
S2
5
0%
50
3” (76mm)
3” (76mm)
S2
Recharge
75%
Zones
3” (76mm)
Receivers on separate power supplies can be programed to 1 controller.
3” (76mm)
25%
Dimming
25%
5.71”
Dimming
100%
6.69”
75%
*
+
3” (76mm)
1
Dimmer Receiver
8
S2
6
+
Zones
8
6.89”
3
4
5
*
Recha rge
100%
2
ZONE 1
Dimmer Receiver
3
6
7
%
S1
5
7
Recharge
7
2
4
S1
4
100%
+
Zo
75
1
50%
75%
Zones
50%
ZONE 2
Zones
25%
Mounting Block1
9”
25%
5.71”
6.8
Re
8
*
DC-ELT-18
ELT-60
Dimming
Dimming
6.6
3
6
1.73” (44mm)
Output
3”
1.7
2.17” (55mm)
S
6
3” (76mm)
6.89”
75%
5.71” (145mm)
0.87” (22mm)
3” (76mm)
7”
2.1
1.18” (30mm)
S
3
3” (76mm)
7”
Input
+
6.69” (170mm)
8
0.8
Male AMP
How To Connect 8-Zone Dimmer
+
5
Mounting Block
Dimmer Receiver
3” (76mm)
Figure 3
6.89” (175mm)
2
7
1.18” (30mm)
3” (76mm)
3” (76mm)
1
4
1.73” (44mm)
3” (76mm)
*
100%
6.89” (175mm)
S2
50%
75%
6.69” (170mm)
8
S1
6
5.71” (145mm)
7
3
25%
+
75%
Zones
5.71”
2.17”
5.71”
Controllers
Controller
Receiver
Part #
Description
L-RMTDIM-8ZKIT-1
8-Zone 12VDC LED Remote Dimmer Kit
L-RMTDIM-8ZREC-1
8-Zone 12VDC LED Dimmer Receiver
Kit includes one remote control and one receiver.
Controllers
08. Rd Sw - 1
3/31/08
+3
Round Switch - 12V
7/8 in.
23 mm
08. Rd Sw - 1
3/31/08
Front View
+3
Available in
3/4 in.
19 mm
7/8 in.
23 mm
White & Black
5/8 in.
17 mm
Part #
6 in.
152 mm
Hole Diam.
3/4 in.
19 mm
39 in. (1 m)
79 in. (2 m)
Hole size required - 19mm (3/4 in)
Description
L-RDSW-1M-BL-1
Black Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC
L-RDSW-1M-WH-1
White Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC
L-RDSW-2M-BL-1
Black Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC
L-RDSW-2M-WH-1
White Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC
3/4” (19 mm) hole required.
3/4 in.
19 mm
5/8 in.
17 mm
Roll Switch
4/29 nr =-5/1120V
08B. Rd Sw - detail ( f. TRE )
Hole size required - 19mm (3/4 in)
16. Roll Switch – Blk 120V
Front View
042908
Top View
1 in.
23 mm
1-3/8 in.
36 mm
4/29 nr = 5/1
Controls 12V plug-in
power supplies.
Attaches to 120V input cords to
plug-in power supplies
042908
1 in.
23 mm
1-3/8 in.
36 mm
5/8 in.
17 mm
Part #
Description
L-WHITE ROLL SWITCH-1
120V 6A White Roll Switch
L-BLACK ROLL SWITCH-1
120V 6A Black Roll Switch
TB-CONTROLLERS-1409
16. Roll Switch – Blk 120V
Install Accessories
Install Accessories
Wire Channel
Features:
15/32”
(11.8 mm)
Plastic channel for wire management
Available in three finishes (black, brown, white
Fits all Tresco wires
9/32”
(7.3 mm)
Sold in 5’ (1.5 m) lengths
Easily cut to size in the fiel
Durable adhesive mounting
Part #
Description
L-WM5-BL-1
5’ (1.5 m) Wire Management Channel Black
L-WM5-BR-1
5’ (1.5 m) Wire Management Channel Brown
L-WM5-WH-1
5’ (1.5 m) Wire Management Channel White
Class 2 Wire and DIY Connectors
Part #
Description
L-16CL2-WH50-1
50’ (15 m) Roll 16 AWG Class 2 Wire White
L-16CL2-WH250-1
L-LED-WCON-WH-1
DIY Barrel Connectors White (1 bag of 10)
See Sales Support section for instructions on how to use Class 2 wire with Barrel Connectors.
Rated for in-wall use
Scan for more info
Install Accessories
Tools of the Trade Starter Kit
Starter Kit Includes:
2 mount blocks
Mini flathead screwdrive
1 drill bit
50’ (15 m) roll of class 2 wire
AMP extractor
VHB tape
10 AMP connectors
10 barrel connectors
15” (381 mm) canvas bag
Phillips screwdriver
10 wire management clips
®
Starter Kit
Part #
Description
L-TOOLKIT-1
Tools of the Trade Tool Bag Starter Kit
Replacement Items
Part #
Description
L-16CL2-WH50-1
L-TRANS-MNT-BL-1
Extra 6-Snap Mounting Block
L-MALE-AMP-10-1
AMP® Connector for Light Fixture (1 bag of 10)
L-WCLP-WH-1
Wire Management Adhesive Clips White (1 bag of 10)
L-LED-WCON-WH-1
DIY Barrel Connectors White (1 bag of 10)
L-DB1732-1
17/32” (13.4 mm) Drill Bit
L-P1SCRWDR-1
#1 Phillips Screwdriver
L-MFSCRWDR-1
Mini Flathead Screwdriver
L-PINEXT-1
Pin Extraction Tool
L-VHBTPE-1134-1
7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll
Install Accessories
AMP® Connector and Extractor
Part #
Description
L-PINEXT-1
Pin Extraction Tool
L-MALE AMP
AMP® Connector for Light Fixture
Pin Extractor safely removes AMP® Connectors
VHB Tape
Part #
Description
L-VHBTPE-1134-1
7/16” (11 mm) x 111-1/2’ (34 m) VHB
Adhesive Tape Roll
Automotive grade VHB tape can be used on all fixtures or as a base layer for Tape ED
products.
Starter/Extension Cord
Features:
Low-voltage wire
Used to extend the starter leads for any
Tresco 12VDC lights
Eight
lengths
66. LED
-Link
Cord Dto choose from
01-14-10
Hole size:
1/2 in.
13 mm
Description
L-LED-LINKD-8-1
3” (8 cm) 12VDC Starter/Link/Extension Cord
L-LED-LINKD-15-1
L-LED-LINKD-25-1
L-LED-LINKD-30-1
L-LED-LINKD-60-1
L-LED-LINKD-120-1
48” (120cm) 12VDC Starter/Link/Extension Cord
L-LED-LINKD-180-1
72” (180cm) 12VDC Starter/Link/Extension Cord
L-LED-LINKD-245-1
13 mm (1/2“) hole required.
TB-INSTALLACCESSORIES-1409
Part #
1/2 in.
13 mm

Power Supplies - Tresco Lighting

Transcription

Similar documents

Smart Dimmer Smart Dimmers

Stavebnice modelu Resin kit BV 222 Dockwagen Complete resin kit

to view Datasheet

3600 SERIES VIDEOPHONES VIDEOCITOFONI SERIE 3600

Stylelite | STYS-DI-PBL - Day-O-Lite

Getting Started Guide

Untitled - SeaStar Solutions

TH 391

Equipamento

Alimentatori universali

MERCURY / MC Multicontacts

SERVOPACK with Additional Options