Classic Line controls
Transcription
Classic Line controls
Classic Line controls Classic Line controls Electronics Design the system you want HydroAir International’s new line of Classic Line control boxes gives you numerious installation possibilities. Use all control boxes with a combination of touches and LED buttons - the possibilities are almost endless. Complete system offering Customization of programme possible Classic Line on/off One box - different jumper controlled features RF remote control On/off functions Automatic dry-out of air system Control boxes are IPx5 Classic Line variable Initial setting of variable min and max output Easy access to screwless wire installation Automatic or manual dry-out of air system Massage mode ”pulsating effect” HydroAir Internatioanal™ ∙ Roustvej 50 ∙ DK-6800 Varde ∙ Tel. (+45) 75 22 46 88 ∙ Fax (+45) 75 22 52 45 ∙ www.hydroair.dk ∙ [email protected] 2009.09 Classic Line controls Classic Line on/off Classic Line variable 20-0241 - 1 function on/off Use the box as a standard 1 function on/off or for water inlet or water level control. 20-0312 / 20-0313 - 2 functions on/off plus 1 variable function Use our 3 function control box to install e.g. a pump, a light and the blower as a variable function. 20-0242 - 2 functions on/off Setting of automatic dry-out of air system is possible. Furthermore by installing a special PIC, you can control 2 functions with only 1 function touch/LED button. 20- 0243 / 20-0244 - 3 and 4 functions on/off with RF module for remote control Both control boxes have integrated RF module for remote control. Setting of automatic dry-out of air system is possible. 20-0314 - 3 functions on/off plus 1 variable function and heater outlet - designed for customization The 4 function control box can be used in the same manner as the 3 function control box. However, you now have 1 extra outlet which can be used for e.g. regulation of the venturi via a solenoid valve (instead of an air control), water inlet or any other feature you prefer on your system. Options You can use the following options with our Classic Line controls Round touches RF remote control *only for Classic Line on/off Oval touches LED buttons Balboa Water Group | Your Single Source Supplier
Similar documents
HydroAir vs. FluidAir pressure mapping Pressure mapping
Pressure mapping is an objective means of capturing pressure distribution across a given surface. This capture gives a visual image, as well as several numeric values. In order to show equivalence ...
More information