Aircraft tire data

Transcription

Aircraft tire data

Aircraft tire
Engineering Data
Introduction
Michelin manufactures a wide variety of sizes and types of tires to the exacting standards of the aircraft industry.
The information included in this Data Book has been put together as an engineering and technical reference to
support the users of Michelin tires. The data is, to the best of our knowledge, accurate and complete at the time of
publication.
To be as useful a reference tool as possible, we have chosen to include data on as many industry tire sizes as possible.
Particular sizes may not be currently available from Michelin. It is advised that all critical data be verified with your
Michelin representative prior to making final tire selections.
The data contained herein should be used in conjunction with the various standards ; T&RA1, ETRTO2, MIL-PRF50413, AIR 8505 - A4 or with the airframer specifications or military design drawings. For those instances where a
contradiction exists between T&RA and ETRTO, the T&RA standard has been referenced. In some cases, a tire is used
for both civil and military applications. In most cases they follow the same standard. Where they do not, data for both
tires are listed and identified.
The aircraft application information provided in the tables is based on the most current information supplied by
airframe manufacturers and/or contained in published documents. It is intended for use as general reference only.
Your requirements may vary depending on the actual configuration of your aircraft. Accordingly, inquiries regarding
specific models of aircraft should be directed to the applicable airframe manufacturer.
1. T&RA: Tire and Rim Association.
2. ETRTO: European Tyre and Rim Technical Organization.
3. MIL-PRF-5041: Military Specification for Aircraft Tires.
4. AIR 8505-A: French Civil and Ministry of Defense Certification Standards for Aircraft Tires.
Table
of contents
Tire Construction
Aircraft tire types
4-7
8-11
Aircraft tire dimensioning
12-15
Aircraft tire ratings
16-25
General notes on operating aircraft tires
26-27
Aircraft tire data
28-51
Aircraft tire application data
52-72
Helpful conversion factors
73
4
Tire construction
ENGINEERING AND TECHNICAL INFORMATION
AIRCRAFT TIRE CONSTRUCTION
As a function of its purpose, an aircraft tire must withstand a wide range of operational conditions. When on the ground, it
must support the weight of the aircraft. During taxi, it must provide a stable cushioned ride while resisting heat generation,
abrasion and wear. At take-off, the tire structure must be able to endure not only the aircraft load but also the forces
generated at high angular velocities. Landing requires the tire to absorb impact shocks while also transmitting high dynamic
braking loads to the ground. All of this must be accomplished while providing a long, dependable, reliable, service life.
These extreme demands require a tire which is highly engineered and manufactured to precise conditions. For this reason,
tires are designed as a composite of various rubbers, fabric and steel products. Each of the components serves a very specific
function in the performance of the tire.
To meet the aircraft demands of today and tomorrow, Michelin designs and produces different and distinct tire
constructions. The conventional cross-ply or BIAS tire, the ORION™ BIAS (unique to Michelin), and the RADIAL tire. Both
nomenclatures (BIAS and RADIAL) describe the angular direction of the carcass plies.
While many of the components of a bias or radial tire have the same terminology, the carcass ply angles are not the only
difference between a bias constructed tire and a radial constructed tire. The technologies utilized are quite different, involving
different design parameters, compounds, and materials.
THE TREAD
refers to the crown area of the tire in contact with the ground. Most Michelin tires are designed with circumferential grooves
molded into the tread area. These grooves help to improve adhesion with the ground surface and provide a mechanism to
channel water away from the area between the tire and runway surface. This reduces the occurrence of hydroplaning on wet
runways.
The tread compound is formulated to resist wear, abrasion, cutting, cracking and heat buildup. It prolongs the life
of the casing by protecting the underlying carcass plies.
5
THE UNDERTREAD
is a layer of specially formulated rubber designed to enhance the bonding between the tread reinforcement / protector plies
and the carcass body. For those tires designed to be retreaded, this rubber layer will be of sufficient thickness to act as the
interface for buffing the old tread assembly, as well as the liaison with the new retread products.
A CARCASS PLY
consists of fabric cords sandwiched between two layers of rubber. Today, the most common fabric cord is nylon. The carcass body
itself is made from multiple layers of carcass plies, each one adding to the strength and load bearing capability of
the tire. The carcass plies are anchored by wrapping them around bead wires, thus forming the PLY TURN-UPS.
FOR BIAS
constructed tires, the carcass plies are laid at angles between 30° and 60° to the centerline or direction
of rotation of the tire. Succeeding plies are laid opposite to each other, with cords running diagonally to provide
balanced strength.
FOR RADIAL
constructed tires, the carcass plies are laid at an angle approximately 90° to the centerline or direction of
rotation of the tire. Each successive layer is laid at this same angle. Radial constructed tires of the same size
have a fewer number of plies than do tires of a bias construction because the radial design enables each
component of the tire to be optimized independently.
Products Unique to the BIAS TIRE
sidewall
tread
tread reinforcing ply
THE TREAD REINFORCEMENT PLY
undertread
consists of single or multiple layers of a special nylon fabric and rubber laid midway beneath the tread grooves and top carcass ply. These
piles help to strengthen and stabilize the crown area by reducing tread
distortion under load and to increase high speed stability. They also
offer a resistance to tread puncture and cutting and help to protect the
carcass body.
carcass plies
Products Unique to the RADIAL TIRE
tread
sidewall
protector ply
THE PROTECTOR PLY
undertread
belt plies
carcass plies
when present, is placed in the crown area just
below the tread rubber. It provides cut resistance
protection to the underlying belts and carcass
plies.
BELT PLIES
(Binding layers) are laid between the tread area
and top carcass ply. They restrain the outer diameter of the tire, providing a flatter tread surface
with greater resistance to squirm and wear.
BREAKER PLIES
(not shown) are sometimes used to reinforce the carcass in the tread
area of the tire.
FABRIC TREAD
(not shown) is a unique development for application in high speed
military aircraft. Multiple plies of nylon cord are layered throughout
the tread stock, reducing rubber distortion under load and high
speeds, thus reducing heat normally generated by flexing. The laminates also control the formation of high speed “standing waves”. Cut
and puncture resistance is also a benefit of this type of construction.
flipper strip
liner
beads
chafer strips
bead
liner
carcass ply turn-ups
carcass ply turn-ups
Bias Tire Construction
Radial Tire Construction
ORION™ TECHNOLOGY
is a development unique to Michelin Bias construction. It consists of a circumferential
CROWN REINFORCEMENT placed on the inside of the tire. This CROWN REINFORCEMENT strengthens and provides a more uniform pressure distribution (flatter shape) in
the footprint SLOWING THE RATE OF WEAR, improving landings performance in a lighter
tire design. Shoulder wear is also reduced due to the small difference in circumference
between the center of the tread and the shoulder.
6
Tire construction
ORION™ technology
THE BEADS
or bead wires anchor the tire to the wheel. They are fabricated from steel wires layered together and embedded
with rubber to form a bundle. The bundle is then wrapped with rubber coated fabric for reinforcement.
Depending on the size and design application, BIAS tires are constructed with 2 to 6 total bead bundles (1 to 3 per side). In
contrast, RADIAL constructed tires have 2 bead bundles (1 on each side) regardless of tire size.
CHAFER STRIPS
are strips of protective fabric laid over the outer carcass plies in the bead area of the tire. Their purpose is to protect the carcass
plies from damage when mounting or dismounting and to reduce the effects of wear and chafing between the wheel and the
tire bead.
THE LINER
in tubeless tires is a layer of rubber specially compounded to resist the permeation of nitrogen and moisture through to the
carcass. It is vulcanized to the inside of the tire and extends from bead to bead.
In tube-type tires, a different, thinner liner material is used to protect the carcass plies from moisture and tube chafing, but
is generally insufficient to maintain air retention.
THE SIDEWALL
is a rubber cover over the side of the carcass plies. Its purpose is to protect the cord plies. In addition, the sidewall rubber
contains anti-oxidants. They are slowly released over time to protect the tire from ultraviolet and ozone attack, which causes
rubber cracking.
7
CHINE TIRES
The “chine” tire is a nose wheel tire designed to deflect water and
slush to the side and away from engine intakes. It was primarily
developed for aircraft with rear-mounted jet engines.
It consists of a flared upper sidewall protrusion which deflects the
spray pattern of water or slush emitted from the tire contact with
the runway. A tire can consist of a single chine (one sidewall flared) for dual nose wheel tire configurations or double chines
(both sidewalls flared) for single nose wheel tire configurations.
The chined tire is now in use as standard equipement on many
commercial jets. It is fully retreadable and may be used on any
aircraft, provided adequate clearance is available.
Single Chine Tire
Dual Chine Tire
8
Aircraft tire types
9
Aircraft tires have typically been classified into different categories or “TYPES”.This type designation was used in addition to
the size, ply rating and speed rating to describe the tire. It has been useful in categorizing tires of similar design/performance
characteristics. Through the years there have been nine different types of aircraft tire designations. Today only four are still
manufactured, TYPES I, III,VII and the Three Part Nomenclature.
TYPE I
TYPE VII
TYPE I category tires are primarily for aircraft with non-retractable landing gear. The design of TYPE I tires is no longer active.
Information is provided in this data book as a reference.
TYPE VII are high pressure tires widely used on jet aircraft. Section widths are generally narrower than other TYPES.
Standard deflection is 32% + 3, - 4.
Size designation is as follows:
M
Examples:
where: M= Nominal overall diameter in inches
8.00”
33”
56”
Examples:
TYPE III
TYPE III tires are generally used for low pressure service providing a larger footprint or “flotation” effect. Tires have smaller
rim diameters relative to the overall diameter as compared to other TYPE designs. While some military exceptions exist,
speeds are generally limited to 160 mph or less. Standard deflection is 35% + 1, - 4 (see definition under the section ‘Aircraft
Tire Dimensioning’).
N-D
Examples:
5.00 - 5
8.50 - 10
20.00 - 20
MxN
where : N= Nominal section width in inches
D= Rim diameter in inches
where: M= Nominal overall diameter in inches
N= Nominal section width in inches
16 x 4.4
26 x 6.6
49 x 17
NOTE: in the data section of this manual, TYPE VII and THREE PART NOMENCLATURE tire sizes have been grouped together.
10
Aircraft tire types
THREE PART NOMENCLATURE
The Three Part Nomenclature is designated as follows:
M x N - D or
MxNRD
where: M= Nominal overall diameter
N= Nominal section width
D= Rim diameter
11
RADIAL TIRES:
Radial tires are designed to meet a Static Loaded Radius requirement and not a given percent deflection, as for bias tires.
1) INCH Code with tire size designations (M & N) given in inches, rim designations (D) in inches:
Examples:
30 x 8.8 R 15
46 x 17.0 R 20
The tire nominal section width is separated from the tire rim diameter by a “-” for bias tires; by an “R” for radial tires.
The “-” and “R” are sometimes referred to as a construction code.These tires are designed for the high speed/high load aircraft
of today.
The different possible THREE PART NOMENCLATURES are presented here.
2) METRIC Code with tire size designations (M & N) given in millimeters, rim designations (D) in inches:
BIAS TIRES:
1) INCH Code with size designations (M & N) given in inches, rim designations (D) in inches:
Standard deflection is 32% +3,-4 except for H type tires and tires with a speed rating less than 160 mph, which have a 35%
rated deflection +1,-4.
SPECIAL DESIGNATIONS:
Some tire designations are preceded by the letters B, C or H.
B tires have a rim width to tire section ratio of 60% to 70% and a 15° bead taper.
H type tires are the same, except they have a 5° bead taper.
Standard deflections for B and H type tires is 35% +1,-4
The C designates a cantilever type tire. It has a very narrow rim width, a section ratio less than 60% and a 15° bead taper.
This tire designation is of limited use today.
Examples:
17.5 x 5.75 - 8
H44.5 x 16.5 - 20
49 x 19.0 - 20
2) METRIC Code with tire size designations (M & N) given in millimeters, rim designations (D) in inches:
Examples:
380 x 150 - 4
670 x 210 - 12
Examples:
360 x 135 R 6
1400 x 530 R 23
12
H= (DO - D)/2
INFLATED TIRE DIMENSIONS
All dimensions are at rated tire pressure.
W
WS
DO
DS
H
*
**
*
**
*
**
*
**
*
*
DO: Outside Diameter
DG: Maximum Grown Overall Diameter
W: Cross Section Width
WG: Maximum Grown Section Width
DS: Shoulder Diameter
DSG: Maximum Grown Shoulder Diameter
WS: Shoulder Width
WSG: Maximum Grown Shoulder Width
H: Section Height
HS: Shoulder Height
A: Width between Rim Flanges
D: Specified Rim Diameter
FH: Rim Flange Height
DF: Rim Flange Diameter
*
**
Dimensions of new, unused inflated tire (after 24 hours)
Dimensions of new, grown inflated tire
(after 50 TSO take-off cycles).
FH DF
A
13
D
CALCULATIONS
WS= 0.90 x W
= 0.88 x W or 0.84 x W for some military applications.
HS= 0.90 x H
= 0.82 x H for some military applications.
% Deflection=
HS= (Ds - D)/2
2d x 100
DO - DF
where: d= deflection (difference between loaded and unloaded section heights),
DF= D + 2FH
BIAS NEW :
BIAS constructed tires are designed to specific norms for overall diameter and percent deflection, which in essence defines
the Static Loaded Radius of the Static Loaded Radius of the tire:
SLR= (DM/2) - % Deflection x (DM - DF)/2
where: DF= D + 2FH
DM= Mean Overall Diameter= (DO MAX + DO MIN)/2
% Deflection=
35% for TYPE III
35% for B&H TYPE
35% for tires rated 160mph or less
32% for all other types
RADIAL NEW :
RADIAL constructed tires are designed to a maximum grown overall dimension and a grown SLR.
SLRG= (DG/2) - % Deflection x (DM - DF)/2
where: % Deflection is between 24% and 33% depending on the tire design.
Therefore, the percent deflection of the RADIAL tire will not necessarily be the same as the percent deflection of the BIAS tire.
What is important is that the SLR of the two types of tires are the same when designed for the same
application. This approach allows radial and bias tires designed for the same application
to be mixable.
AIRCRAFT TIRE GROWTH
WSG
WS
USED
INFLATED
TIRE
RX
TO CL
AXLE
NEW
INFLATED
TIRE
CR
SX RADIUS
DG
DSG
DO
WS
WSG
2
2
DS
WG
W
CW
H
.50 H
HS
WX
Allow increasing 1
MIN.
clearance from
4
CW to CR
1
MIN. D
4
NOTE: Radii WS/2 and WSG/2 are drawn through their respective shoulder points tangent to DO and DG.
Radii below the shoulder points pass through the shoulder points and are tangent to W and WG
respectively.
14
GROWTH FACTORS:
The maximum grown tire dimensions can be calculated using the formulae given below. They allow for the stretch of
the nylon carcass fabric encountered during service.
NOTE: Dimensions W and WG include all protective side ribs, branding lettering, bars and decorations.
AIRCRAFT TIRE CLEARANCE
Minimum clearance allowances between the tire and adjacent parts of the aircraft should be based on maximum dimensions
derived from the tables plus growth due to service, plus increase in diameter due to centrifugal force, and tire deformation
above the horizontal centerline due to load.
How To Determine Minimum Clearance Allowance:
1) Use maximum new tire dimensions from the DATA tables
2) Use the growth factor from the Growth chart.
WG= GW W
DG= D+2GHH
DSG= D + 2GHHS
WSG= GW WS
H= (DO - D)/2
HS= (DS - D)/2
15
1) Determine the maximum grown tire envelope (see Aircraft Tire Growth).
2) Obtain the radial clearance CR and lateral CW from the following formula:
1.07
GROWTH
FACTORS
17.02 + 2.61 (SPEED/100)3.348
CR= [ ————————————————————— ] x WG + 0.4
1000
GH
Where: SPEED= MPH
CW= (0.19 x WG) + 0.23
1.04
GW
60
100
Aspect ration (AR)
Section Width Growth Factor GW= 1.04
Section Height Growth Factor GH= 1.115 - (.075 x AR)
3) Calculate the clearances using the following formulae:
RX MIN= Radial distance from axle centerline to adjacent part
= (DG / 2) + CR
WX MIN= Lateral distance from tire centerline to adjacent part
= (WG / 2) + CW
SX MIN= Clearance allowed between tire shoulder area and adjacent part
= (CW + CR) / 2
16
PLY RATING
Ply rating identifies the maximum static load carrying capacity of a given tire and corresponding inflation pressure in a
specific type of service. It is important to realize that ply rating is an indicator of tire strength and not necessarily the actual
number of carcass plies in the tire. For example, a 26 x 6.6 with a 14 Ply Rating has only 8 carcass plies. The maximum static
load and corresponding pressure for a particular ply rating and tire size are determined by calculations as outlined in the
Engineering Design information guides of T&RA and ETRTO.
LOAD RATING
It is the maximum permissible load of the tire when at rest.
MAIN WHEEL TIRE:
FAR/JAR 25.733 specifies that for aircraft with a main landing gear axle fitted with more than one wheel, the maximum load
capability of a tire be at least 7% greater than the maximum load requirement of the aircraft for that wheel position. Thus an
H40 x 14.5-19/22PR tire with a rating of 30,100 lbs. could only be fitted on an aircraft with a tire load requirement up
to 28,131 lbs. (30,100/1.07).
NOSE WHEEL TIRE:
All Michelin tires operating in a nose landing gear position are designed to withstand the following maximum loads during
braking:
TYPE III: 1.45 x Maximum Static Tire Load
All Other TYPES: 1.50 x Maximum Static Tire Load
17
For example:
Rated Load
Rated Pressure
For a Maximum Operating Load
Operating Pressure Unloaded
= 30,100 lbs
= 180 psi
= 28,430 lbs
= 28,430 x 180 = 170 psi
30,100
LOADED CONDITION:
Many inflation checks are made while the tire is mounted on the aircraft. Under loaded conditions, the measured pressure
of the tire will be a value 4% greater than the unloaded pressure.
Taking the example from above:
Rated Load
Rated Pressure
Rated Pressure Loaded= 180 x 1.04
For a Maximum Operating Load
Operating Pressure Loaded
= 30,100 lbs
= 180 psi
= 187 psi
= 28,430 lbs
= 28,430 x 180 x 1.04 = 177 psi
30,100
PRESSURE/TEMPERATURE RELATIONSHIP
The relationship between tire temperature and tire pressure is proportional. As the temperature of the tire increases,
so will the pressure. The inverse is also true. When the tire temperature is reduced, the pressure will also reduce.
INFLATION PRESSURE
All inflation pressures shown in the rating tables are for unloaded tires at ambient temperature (cold). A 3-hour cooling time
should be allowed after landing before checking inflation pressure.
UNLOADED CONDITION:
Most tires are put into service at loads less than rated load. In order to maintain the design operating conditions (Static Load
Radius) of the tire, the operating inflation pressure is adjusted accordingly. This adjustment is in direct proportion to the rated
load and pressure.
Assuming a constant volume, the relationship for degrees centigrade can be defined as follows:
New Pressure: P= PO x (273 + t)
(273 + tO)
where: PO= initial pressure of the tire in BARS or PSI
P= new pressure of the tire in BARS or PSI
tO= initial tire temperature in °C
t= new tire temperature in °C
18
Thus, if a tire has an initial pressure of 10.5 bars at 15°C, the tire pressure at 30°C would be:
19
HELICOPTER USE
P= 10.5 x (273 + 30) = 11.0 bars
(273 + 15)
When aircraft tires are used on helicopters, standard aircraft tire ratings are adjusted by a factor of 1.5 (both rated load
and inflation).
Assuming a constant volume, the relationship for degrees Fahrenheit can be defined as follows:
The maximum allowable inflation pressure is 1.8 times the rated inflation pressure or 45% of the specified
burst pressure, whichever is lower.
New Pressure: P= PO x (460 + T)
(460 + TO)
The maximum dimensions for new helicopter tires are 4% greater than the maximum aircraft tire dimensions when
inflated to the 1.8 factor or 45% of burst inflation pressure. To calculate the maximum dimensions, apply the 4% factor
to section height and section width of the tire only (deduct rim diameter).
where: PO
P
TO
T
= initial pressure of the tire in BARS or PSI
= new pressure of the tire in BARS or PSI
= initial tire temperature in °F
= new tire temperature in °F
The above calculations make the assumption that the volume of the tire remains constant over the range of temperature
change. In reality, because a tire is an elastic body, the volume change can be sufficient to influence the pressure change.
Michelin has found that as a general rule, a temperature change of 5°F (3°C) will result in a tire pressure change of
approximately 1%.
STATIC LOADED RADIUS
A civil aircraft tire is designed to operate at a specific deflection within its load rating capability.
For BIAS tires, the design rules, historically, have been to set overall new tire dimensions and to use the standard deflection
(based on tire TYPE) with the result being the Static Loaded Radius (SLR) of the new tire.
For the RADIAL tire, the design parameter has been to specify the SLRG and the overall grown dimensions of the tire (after
rolling). The actual, percentage deflection of a RADIAL tire may be different than its BIAS equivalent in order to achieve a
specified SLR.
However, it is very possible that a new BIAS tire and a new RADIAL tire designed for the same application and stood,
unloaded, side by side, would not be of the same overall diameter.
GROUND USE OF AIRCRAFT TIRES
Because of their apparent high-load capabilities, aircraft tire load ratings may appear attractive for ground vehicle
applications. However, aircraft tires are designed specifically for aircraft tire service where high loads and deflections
are acceptable because of the relatively short periods of ground roll and intermittent usage. When aircraft tires are
inoperative, they have relatively long periods in which to dissipate the heat built up from landing, taxi and take-off
operations.
AIRCRAFT TIRES SHOULD NOT BE USED FOR GROUND USE EXCEPT IN SPECIAL CASES WHERE THE INFLATION
PRESSURES, SPEEDS, AND LOADS HAVE BEEN RELATED TO SERVICE CONDITIONS BY ENGINEERING ANALYSIS.
For ground vehicle applications of aircraft tires, contact your Michelin representative.
Branding
commercial bias tire
Branding
commercial radial tire
typical Michelin branding layout
TRADEMARK
TRADEMARK
PART NO.
MOLDED SKID
TUBELESS OR TUBETYPE DESIGNATION
FAA QUALIFICATION
STANDARD
QUALIFICATION
STANDARD
DGAC1
QUALIFICATION
STANDARD
SERIAL NUMBER CODE
For details, see page 25
2
EQUIPMENT
IDENTIFICATION
20
21
LOAD RATING
TYPE NUMBER
MOLDED SKID
PLY RATING
CODE
IDENTIFICATION
SPEED RATING
LOAD RATING
EQUIPMENT
IDENTIFICATION
PLY RATING
COUNTRY
OF ORIGIN
SERIAL NUMBER CODE
AEA1 CODES
COUNTRY OF ORIGIN
SIZE DESIGNATION
1. AEA: Association of European Airlines
CONSTRUCTION
DESIGNATION
SIZE
DESIGNATION
PART NO.
SPEED RATING
TUBELESS3 DESIGNATION
1. DGAC: Direction Générale de l’Aviation Civile / 2. FAA: Federal Aviation Administration / 3. All MICHELIN aircraft radials are tubeless
Branding
military bias tire
Branding
military radial tire
TRADEMARK
TRADEMARK
SERIAL NUMBER CODE
INDEX LETTER
EQUIPMENT
IDENTIFICATION
CODE
IDENTIFICATION
QTR NO.
CUT LIMITS
MAXIMUM WEAR LIMIT INDICATOR
Application is program dependant
SERIAL NUMBER CODE
22
FABRICATION
MONTH / YEAR
MWL - 3
SCD1 NO. OR MS2
NO. OR OEM3
SPECIFICATION NO.
OR USAF4 NO.
23
COUNTRY
OF ORIGIN
TYPE NUMBER
MAXIMUM WEAR LIMIT INDICATOR
Application is program dependant
M
W
L-
TUBELESS OR
TUBE TYPE
DESIGNATION
3
COUNTRY
OF ORIGIN
CODE
IDENTIFICATION
NATIONAL OR NATO
STOCK NUMBER
CONSTRUCTION
DESIGNATION
PART NO.
TUBELESS DESIGNATION1
SIZE DESIGNATION
1.SCD: Specification Control Drawing / 2.MS: Military Specification / 3.OEM: Original Equipment Manufacturer / 4. USAF: U.S. Air Force
1. All MICHELIN aircraft radials are tubeless
SIZE
DESIGNATION
PART NO.
Branding
bias retread tire
Michelin tire
serial number codes
RETREADER TRADEMARK
Radial Serial Number Definition:
9 2 1 1 B 0 2 5
Last number of the manufacturing
year (example: 9 for 1999).
AEA TREAD CODE
RETREAD
R-LEVEL
TUBELESS
DESIGNATION
MOLDED SKID
SPEED RATING
MONTH &
YEAR OF
RETREAD
RETREAD
CONSTRUCTION
DESIGNATION
PLY RATING
3 numbers indicating the
manufacturing day in Julian calendar
(example: the tire was manufactured
the 211th day of the year).
Code letter related to the facility and
the decade, see table below.
Unique production identification
number.
AIRLINE CODE
SIZE DESIGNATION
CASING SERIAL
NUMBER
PLANT CODE
24
Bias Serial Number Definition:
9 2 1 1 P 0 0 0 2 5
25
Last number of the manufacturing
year (example: 9 for 1999).
Branding
radial retread tire
3 numbers indicating the
manufacturing day in Julian calendar
(example: the tire was manufactured
the 211th day of the year).
Code letter related to the facility and
the decade, see table below.
AEA TREAD CODE
Unique production identification
number.
MONTH & YEAR
OF RETREAD
RETREAD R-LEVEL
RATED SPEED
PLANT CODE
Letter signification
The letter code in the tire serial number is used to identify both the manufacturing facility and the decade of manufacture.
It follows the rules below:
AIRLINE CODE
INTERNAL
MICHELIN CODE
MOLDED SKID
MKC
MNW
MBO
MCN
MNK
Manufacturing
Facility
Through
Dec. 31, 1995
included
From Jan. 01, 1996 to
Dec. 31, 1999
included
from Jan. 01, 2000 to
Dec. 31, 2009
included
KANSAS CITY, USA
Bourges
B
B
A
NORWOOD, USA
Clermont-Ferrand
F
F
G
Greenville
K
K
L
Nong Khae
T
T
W
Norwood
N
P
U
BOURGES, France
CUNEO, Italie
NONG KHAE, Thailand
WARNING
AIRCRAFT TIRES CAN BE OPERATED UP TO OR AT
RATED INFLATION PRESSURES ; EXTREMELY HIGH
INFLATION PRESSURES MAY CAUSE THE AIRCRAFT
WHEEL OR TIRE TO EXPLODE OR BURST, WHICH MAY
RESULT IN SERIOUS OR FATAL BODILY INJURY.
AIRCRAFT TIRES MUST ALWAYS BE INFLATED FROM
THE LOW PRESSURE SIDE, PROPERLY REGULATED, OF
ANY INFLATION BOTTLE OR CANISTER.
THE HIGH PRESSURE SIDE SHOULD NEVER BE USED.
THE SAFETY PRACTICES FOR MOUNTING AND
DEMOUNTING AIRCRAFT TIRES RECITED IN THE
AIRCRAFT TIRE CARE AND SERVICE MANUAL MUST
ALWAYS BE FOLLOWED.
RADIUS OF GYRATION
Radius of gyration for new tire and tube assemblies and new tubeless tires is calculated by using the following formulae:
Radius of Gyration=
(accuracy ± 5%)
DO MAX + DO MIN
5.12
For wheel assemblies including rotating brake parts, calculate radius of gyration values as follows:
Radius of Gyration= 0.40 x D where D is the Specified Rim Diameter (accuracy ± 20%)
MEASURING AIRCRAFT TIRES
For all BIAS tires and for MILITARY RADIAL tires, dimensional data has been given in this Data Book for “New Inflated
Tires”. A “New Inflated Tire” is one that has been mounted, allowed to stand for 12 hours minimum (preferably 24 hours)
at a stable temperature and then reinflated to the unloaded pressure shown in the applicable table.
For all CIVIL RADIAL tires, dimensional data is given for “Grown Inflated Tires”. A “Grown Inflated Tire” is one that has
completed 50 TSO take-off cycles. Tires are allowed to cool to ambient temperature and are inflated to the unloaded
pressure shown in the applicable table.
Having met the appropriate conditions from above, the circumference of the inflated, unloaded tire is measured.
The diameter is determined by calculation using the following formula:
26
General notes
on operating aircraft tires
OPERATING TIRE TEMPERATURES
An aircraft tire in use is capable of generating high internal temperatures. This is a result of the natural hysteretic nature of tire
materials and the relatively high tire deflections necessary for the loads carried. The fact that rubber is a poor conductor of
heat accentuates this problem. The magnitude of this temperature rise is dependent on the duration of service and the speeds
obtained.
Excessive heat buildup from running overloaded or underinflated as well as from high taxi speeds is detrimental to the
functional life of the tire. High heat will also adversely affect the wear characteristics of the tread rubber.
It is essential that aircraft tire service be intermittent to allow for cooling periods.
Michelin tires designed for typical applications are not recommended for use in ambient temperatures exceeding 225°F
(110°C), or where brake heat results in temperatures which exceed 300°F (150°C) at tire and wheel interface. For temperature
conditions outside of these limits, contact your Michelin representative.
All Michelin manufactured Radial aircraft tires are certified for in-service operation to –55°C. Beginning with manufactured
date, June 1999, all Michelin Bias aircraft tires are certified for in-service operation to –55°C.
TIRE INFLATION
Proper inflation pressure is essential to tire performance and long term tire life. The maintenance procedures outlined in the
airframer Operators’ Manual should be closely followed. In lieu of the Operators’ Manual, the Michelin Aircraft Tire Care and
Service Manual should be referenced.
The maximum allowable air loss for tubeless tires is five percent over a 24-hour period. This does not include possible
pressure loss during the initial 24-hour period due to tire growth. A newly mounted tire inflated to rated pressure should be
allowed to stabilize for a minimum of 12 hours, preferably 24 hours, in a workshop where the temperature is maintained
relatively constant. Afterwards, it should be reinflated as necessary to rated pressure before beginning any pressure loss
checks. In service, the pressure drop should be a maximum of five percent (5%) for any 24-hour period (constant
temperature). If more than five percent pressure drop is indicated for any 24-hour period, a check should be made following
the procedures described in the Michelin Aircraft Tire Care and Service Manual.
DO=
Measured Circumference
3.14
CHANGES IN PRESSURE VS. TEMPERATURE
For all aircraft applications, the range of ambient air temperature can affect tire performance. It is essential that adjustment be
made as each particular case requires. As the ambient temperature increases/decreases, tire pressure also increases/decreases.
It must be noted that operating inflation pressure is also a function of load. Changes in tire load must also be considered when
adjusting tire pressure.
CAUTION: inflation pressures should only be measured on “cold” tires. A tire is considered “cold” when it has cooled to ambient
temperature after rolling. Tires not exposed to direct sunlight will reach ambient temperature within 3 hours after landing.
LOAD AND INFLATION
Operating pressures are set by the airframe manufacturer and given in the Operators’ Manual. They are based on the anticipated
loads, center of gravity and dynamic forces. Inflation values are set to avoid deflecting the tire more than its design deflection.
The pressure of a loaded tire will be 4% higher than for the same tire unloaded. This is a result of the high deflections and
subsequent reduction in volume which occurs when the tire is loaded. All pressure ratings for tires are based on an unloaded tire.
STANDING WAVES
At high speeds and high deflections, aircraft tires may develop a polygonal shape from the formation of standing waves in the
sidewall. This condition accentuates heat buildup at high speeds and can lead to tread cracking, chunking or separations.
The formation and magnitude of these standing waves is greatly influenced by tire deflection. Proper inflation pressure
maintains tire deflection within design limits.
27
NOTE:
The data given for certain Bias tires listed in the sections:
TYPE III and TYPE VII + THREE PART (INCH CODE)
have been converted from Metric units to English units
for consistency of presentation. The sizes affected have
been identified with an asterisk (*).
Conversion figures used were as follows:
2.204 kg/lb rounded to the nearest 10 lbs.
25.4 mm/inch rounded to the nearest 0.05 inch.
14.5 bars/psi rounded to the nearest psi.
28
Aircraft tire data
The definitions below describe those terms used in the presentation of the aircraft tire data.
TIRE DESCRIPTIONS
Size:
M:
N:
D:
Ply Rating:
Nominal overall dimensions describing the size of the tire.
Overall nominal diameter.
Overall nominal section width.
Rim diameter.
Maximum static load carrying capacity of a given tire and corresponding inflation pressure.
It is an indicator of tire strength and not the actual number of carcass plies in the tire.
Where the ply rating has not been identified on the tire, usually the maximum static load
and pressure will be given.
NOTE: Tires with AEA or AIR 8505-A marking standards will have the actual number of plies coded
on the sidewall.
Speed Index: Maximum rated ground speed for the tire at maximum rated load and rated pressure.
APPLICATION RATING
Max. Loading: Maximum rated load of the tire.
Inflation Pressure: Maximum rated inflation pressure with tire unloaded.
Approximate Bottoming Load: The approximate load necessary to fully deflect the tire without compressing
the lower sidewall structure against the wheel flange when at rated pressure.
Dimensions are at rated tire pressure.
DO MAX: Maximum overall diameter (New tire inflated).
MIN: Minimum overall diameter (New tire inflated).
W MAX: Maximum section width (New tire inflated).
MIN: Minimum section width (New tire inflated).
DS MAX: Maximum shoulder diameter (New tire inflated).
WS MAX: Maximum shoulder width (New tire inflated).
29
MAX GROWN INFLATED TIRE DIMENSIONS
NOTE: Grown dimensions are measured on tires having completed 50 TSO take-off cycles, allowed to cool to ambient
temperature and inflated to rated pressure.
DG:
WG:
DSG:
WSG:
Maximum grown overall diameter (Grown tire inflated).
Maximum grown section width (Grown tire inflated).
Maximum grown shoulder diameter (Grown tire inflated).
Maximum grown shoulder width (Used tire inflated).
ASPECT RATIO
Ratio of the mean section height to the mean section width.
STATIC LOADED RADIUS
At Rated Load: Distance from the center of the axle to the tread surface when at rated load and pressure.
At Bottoming Load: Distance from the center of the axle to the tread surface when the tire is fully deflected against the rim.
RIM DESCRIPTIONS
A:
D:
FH:
G:
DF:
Interior distance between flanges of the rim.
Specified rim diameter.
Flange height.
Minimum ledge width of the rim.
Outer flange diameter.
QUALIFICATION STANDARD
Minimum qualification specification(s) which is basis for approval.
Aircraft tire data
BIAS TYPE I
TIRE DESCRIPTIONS
M
SIZE
N
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
8.00
10.00
12.50
14.50
17.00
26.00
27
33
36
44
44
47
56
56
6
8
8
8
10
12
10
10
12
12
14
14
20
22
120
120
120
160
120
120
120
120
120
120
120
120
120
120
INFLATION APPROX.
MAX. PRESSURE BOTTOMING
LOADING (UNLOADED) LOAD
(lbs)
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
QUALIFICATION
STANDARD
(inches)
A
AT RATED AT BOTTOMING Width Between
LOAD
LOAD
Flanges
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
(psi)
(lbs)
450
650
1,800
2,000
2,300
6,300
5,500
8,000
10,500
15,000
18,200
17,500
35,000
37,500
55
45
80
80
55
70
70
70
70
70
85
70
100
110
1,215
1,755
4,860
5,400
6,210
17,010
14,850
21,600
28,350
40,500
49,140
47,250
94,500
101,250
8.10
10.06
12.50
14.70
17.08
26.00
28.16
33.06
36.86
44.94
44.94
44.98
56.62
56.62
7.86
9.76
12.10
14.26
16.56
24.96
27.22
32.06
35.40
43.64
43.64
47.02
55.44
55.44
3.06
4.18
5.40
6.24
7.20
11.00
9.66
11.30
13.08
15.76
15.76
17.00
19.92
19.92
2.94
4.00
4.98
5.98
6.92
10.56
9.14
10.84
12.56
15.12
15.12
16.32
19.12
19.12
7.32
9.00
11.16
13.14
15.26
23.24
26.30
31.30
34.84
42.50
42.50
44.24
53.44
53.44
1.88
2.52
3.44
3.70
4.52
7.16
5.70
6.60
7.02
8.52
8.53
10.66
11.44
11.44
0.85
0.82
0.81
0.80
0.81
0.80
0.73
0.73
0.72
0.66
0.66
0.72
0.74
0.74
3.2
3.9
4.9
5.8
6.1
10.3
11.6
13.8
15.3
18.7
18.7
20.1
23.6
23.6
2.5
2.7
3.3
3.9
4.4
6.5
8.6
10.3
11.1
13.4
13.4
14.2
16.9
16.9
2.68
3.62
4.75
5.62
6.56
10.00
8.94
10.78
12.46
14.87
14.87
16.25
18.94
18.94
2.88
3.19
3.94
4.68
5.44
8.25
14.00
16.50
17.75
22.00
22.00
23.50
27.00
27.00
0.481
0.514
0.561
0.645
0.733
1.125
0.688
0.813
0.875
1.250
1.250
1.125
1.750
1.750
700
1,200
800
800
1,285
1.800
2,150
2,150
3,110
1,225
1,150
1,750
1,750
1,750
2,350
2,350
2,350
1,500
2,300
2,300
2,300
3,150
3,150
3,150
2,770
2,770
3,750
3,750
4,750
4,750
4,750
4,750
5,750
5,750
7,740
1,260
1,900
1,900
2,550
3,590
1,600
2,400
4,400
5,300
6,650
2,490
3,000
35
55
31
31
50
70
88
88
130
50
29
42
42
42
55
55
55
30
51
51
51
75
75
75
60
60
80
80
100
100
100
100
120
120
164
23
38
38
54
72
30
46
95
95
125
61
46
1,890
3,240
2,160
2,160
3,470
4,860
5,805
5,805
8,397
3,308
3,105
4,725
4,725
4,725
6,345
6,345
6,345
4,050
6,210
6,210
6,210
8,505
8,505
8,505
7,479
7,479
10,125
10,125
12,825
12,825
12,825
12,825
15,525
15,525
20,898
3,402
5,130
5,130
6,885
9,693
4,320
6,480
11,880
14,310
17,955
6,723
8,100
13.25
13.25
13.25
14.20
14.20
14.20
14.20
14.20
14.20
13.47
17.50
17.50
17.50
17.50
17.50
17.50
17.50
19.85
19.85
19.85
19.85
19.85
19.85
19.85
22.10
22.10
22.10
22.10
22.10
22.10
22.10
22.10
22.10
22.10
22.10
18.75
18.75
18.75
18.75
18.75
20.85
20.85
20.85
20.85
20.85
17.13
24.15
12.70
12.70
13.65
13.65
13.65
13.65
13.65
13.65
13.65
12.99
16.80
16.80
16.80
16.80
16.80
16.80
16.80
19.15
19.15
19.15
19.15
19.15
19.15
19.15
21.35
21.35
21.35
21.35
21.35
21.35
21.35
21.35
21.35
21.35
21.35
18.00
18.00
18.00
18.00
18.00
20.10
20.10
20.10
20.10
20.10
16.54
23.30
5.05
5.05
4.95
4.95
4.95
4.95
4.95
4.95
4.95
5.54
6.30
6.30
6.30
6.30
6.30
6.30
6.30
6.90
6.90
6.90
6.90
6.90
6.90
6.90
6.65
6.65
6.65
6.65
6.65
6.65
6.65
6.65
6.65
6.65
6.65
7.00
7.00
7.00
7.00
7.00
7.30
7.30
7.30
7.30
7.30
6.89
7.65
4.75
4.75
4.65
4.65
4.65
4.65
4.65
4.65
4.65
5.26
5.90
5.90
5.90
5.90
5.90
5.90
5.90
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.45
6.45
6.45
6.45
6.45
6.85
6.85
6.85
6.85
6.85
6.50
7.20
11.60
11.60
12.55
12.55
12.55
12.55
12.55
12.55
12.55
13.47
15.45
15.45
15.45
15.45
15.45
15.45
15.45
17.70
17.70
17.70
17.70
17.70
17.70
17.70
19.90
19.90
19.90
19.90
19.90
19.90
19.90
19.90
19.90
19.90
19.90
16.45
16.45
16.45
16.45
16.45
18.55
18.55
18.55
18.55
18.55
15.16
21.60
4.30
4.30
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.27
5.35
5.35
5.35
5.35
5.35
5.35
5.35
5.85
5.85
5.85
5.85
5.85
5.85
5.85
5.65
5.65
5.65
5.65
5.65
5.65
5.65
5.65
5.65
5.65
5.65
5.95
5.95
5.95
5.95
5.95
6.20
6.20
6.20
6.20
6.20
5.91
6.50
0.92
0.92
0.93
0.93
0.93
0.93
0.93
0.93
0.93
0.86
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.88
0.88
0.88
0.88
0.88
5.2
5.2
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.4
6.9
6.9
6.9
6.9
6.9
6.9
6.9
8.0
8.0
8.0
8.0
8.0
8.0
8.0
9.1
9.1
9.1
9.1
9.1
9.1
9.1
9.1
9.1
9.1
9.1
7.3
7.3
7.3
7.3
7.3
8.4
8.4
8.4
8.4
8.4
6.9
9.7
3.5
3.9
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.8
4.6
4.6
4.6
4.6
4.6
4.6
4.6
5.6
5.6
5.6
5.6
5.6
5.6
5.6
6.9
6.9
6.9
6.9
6.9
6.9
6.9
6.9
6.9
6.9
6.9
4.6
4.6
4.6
4.6
4.6
5.9
5.9
5.9
5.9
5.9
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.25
5.25
5.25
5.25
5.25
5.25
5.25
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
5.00
5.00
5.00
5.00
5.00
5.50
5.50
5.50
5.50
5.50
5.75
5.50
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
6.0
10.0
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812
0.800
0.812
W
WS
3.84
4.22
5.06
5.97
6.91
10.50
15.38
18.13
19.50
24.50
24.50
25.75
30.50
30.50
DO
DS
H
FH DF
A
D
BIAS TYPE III
30
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.50
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.25
7.50
-4
-4
-5
-5
-5
-5
-5
-5
-5
-4
-6
-6
-6
-6
-6
-6
-6
-8
-8
-8
-8
-8
-8
-8
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
-6
-6
-6
-6
-6
-8
-8
-8
-8
-8
-6
- 10
4
6
4
4
6
8
10
10
14
8
4
6
6
6
8
8
8
4
6
6
6
8
8
8
6
6
8
8
10
10
10
10
12
12
14
4
6
6
8
10
4
6
10
12
16
8
6
120
120
120
160
120
160
120
120
120
160
120
120
160
120
120
120
160
120
120
160
120
120
120
160
120
120
160
190
160
190
120
LS
120
160
150
120
0.92
6.9
0.80
0.80
0.80
0.80
0.80
0.85
1.25
1.25
0.85
0.80
0.80
0.85
0.85
0.85
0.90
0.90
0.90
0.85
0.85
0.85
0.85
0.95
0.95
0.95
0.85
0.85
0.95
0.95
1.10
1.10
1.10
1.10
1.30
1.30
1.55
0.80
0.85
0.85
0.90
0.90
0.85
0.85
1.30
1.05
0.85
5.50
5.50
6.50
6.50
6.50
6.50
6.50
6.50
6.50
5.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
9.62
9.62
9.62
9.62
9.62
9.62
9.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
7.50
7.50
7.50
7.50
7.50
9.62
9.62
9.62
9.62
9.62
7.60
11.62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
31
Aircraft tire data
BIAS TYPE III
TIRE DESCRIPTIONS
M
SIZE
N
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
32
7.50
7.50
7.50
7.50
7.50
8.00
8.00
8.00
8.00
8.00
*8.00
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.90
9.00
9.00
*9.00
*9.25
*9.25
9.50
9.50
9.50
10.00
*10.50
*10.50
11.00
11.00
11.00
11.00
12.50
12.50
12.50
12.50
13.50
15.00
15.00
15.00
15.00
15.00
15.50
15.50
15.50
15.50
17.00
17.00
17.00
17.00
17.00
19.00
20.00
20.00
20.00
- 10
- 10
- 14
- 14
- 14
-4
-4
-6
-6
-6
-7
-4
-6
-6
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 12.5
-6
-6
- 10
- 12
- 12
- 16
- 16
- 16
-7
- 16
- 16
- 12
- 12
- 12
- 12
- 16
- 16
- 16
- 16
- 16
- 10
- 12
- 16
- 16
- 16
- 20
- 20
- 20
- 20
- 16
- 16
- 16
- 20
- 20
- 23
- 20
- 20
- 20
8
12
8
10
12
4
6
4
6
8
6
4
4
6
6
8
8
8
10
10
10
12
12
6
8
10
10
8
12
10
10
12
12
10
12
6
8
8
10
10
12
12
14
24
10
14
10
14
16
14
14
16
20
10
12
12
22
22
16
20
22
26
120
160
160
120
120
160
120
120
160
120
160
LS
120
104 kt
160
160
160
160
120
160
150
200
160
160
160
160
120
120
160
20
200
174 Kt
INFLATION APPROX.
(lbs)
4,070
1,800
5,700
7,200
8,700
1,100
1,700
1,350
2,050
2,800
3,350
1,600
1,600
2,275
3,250
4,400
4,400
4,400
5,500
5,500
5,500
8,000
8,000
4,300
4,000
4,500
1,200
5,600
8,840
9,250
9,250
11,200
7,100
9,590
11,590
4,600
6,300
6,300
8,200
10,600
12,800
12,800
15,000
27,500
8,850
12,700
12,200
17,100
19,700
20,800
20,800
24,000
29,900
13,500
16,000
16,000
34,500
34,500
29,000
46,500
38,500
46,500
(psi)
(lbs)
67
80
87
110
130
24
35
23
35
48
61
20
20
30
41
55
55
55
70
70
70
100
100
50
50
58
64
61
100
90
90
110
80
75
90
35
45
45
60
60
75
75
90
145
38
65
53
70
81
90
90
106
135
48
60
60
130
130
85
125
95
125
10,989
4,860
15,390
19,440
23,490
2,970
4,590
3,645
5,535
7,560
9,045
4,320
4,320
6,143
8,775
11,880
11,880
11,880
14,.850
14,850
14,850
21,600
21,600
11,610
10,800
12,150
3,240
15,120
23,868
24,975
24,975
30,240
19,170
25,893
31,293
12,420
17,010
17,010
24,600
28,620
34,560
34,560
40,500
74,250
23,895
34,290
32,940
46,170
53,190
56,160
56,160
64,800
80,730
36,450
43,200
43,200
93,150
93,150
78,300
125,550
103,950
125,550
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
24.15
24.15
27.75
27.75
27.75
18.00
18.00
19.50
19.50
19.50
20.01
22.10
22.10
22.10
25.65
25.65
25.65
25.65
25.65
25.65
25.65
25.65
25.65
27.70
22.40
22.40
25.20
28.15
28.15
33.35
33.35
33.35
25.45
34.85
34.85
32.20
32.20
32.20
32.20
38.45
38.45
38.45
38.45
39.80
34.80
36.30
42.40
42.40
42.40
45.25
45.25
45.25
45.25
45.05
45.05
45.05
48.75
48.75
55.10
56.00
56.00
56.00
23.30
23.30
27.00
27.00
27.00
17.15
17.15
18.75
18.75
18.75
19.30
21.15
21.15
21.15
24.70
24.70
24.70
24.70
24.70
24.70
24.70
24.70
24.70
27.30
21.40
21.40
24.40
27.35
27.35
32.50
32.50
32.50
24.30
33.85
33.85
31.00
31.00
31.00
31.00
37.50
37.50
37.50
37.50
38.85
34.20
35.35
41.40
41.40
41.40
44.30
44.30
44.30
44.30
43.70
43.70
43.70
47.70
47.70
53.15
54.30
54.30
54.30
7.65
7.65
7.65
7.65
7.65
8.30
8.30
7.95
7.95
7.95
8.25
8.85
5.35
8.35
8.70
8.70
8.70
3.70
3.70
8.70
8.70
8.70
8.70
9.00
9.25
9.25
9.45
9.45
9.45
9.70
9.70
9.70
10.25
10.45
10.45
11.20
11.24
11.20
11.20
12.75
12.75
12.75
12.75
14.00
15.00
14.70
15.30
15.30
15.30
16.00
16.00
16.00
16.00
17.40
17.40
17.40
17.25
17.25
19.38
20.10
20.10
20.10
7.20
7.20
7.20
7.20
7.20
7.70
7.80
7.35
7.35
7.35
7.85
8.30
8.30
8.30
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.65
8.55
8.55
8.85
9.05
9.05
9.10
9.10
9.10
9.65
10.05
10.05
10.50
10.50
10.50
10.50
12.00
12.00
12.00
12.00
13.25
14.60
13.95
14.40
14.40
14.40
15.05
15.05
15.0
15.05
16.35
16.35
16.35
16.40
16.40
18.25
19.20
19.20
19.20
21.60
21.60
25.30
25.30
25.30
15.50
15.50
17.05
17.05
17.05
17.30
19.20
19.20
19.20
22.80
22.80
22.80
22.80
22.80
22.80
22.80
22.80
22.80
24.95
19.45
19.45
22.25
25.40
25.40
30.25
30.25
30.25
22.15
31.50
31.50
28.55
28.55
28.55
28.55
34.40
34.40
34.40
34.40
35.10
30.35
31.95
37.65
37.65
37.65
40.70
40.70
40.70
40.70
39.80
39.80
39.80
43.60
43.60
49.30
49.50
49.50
49.50
6.50
6.50
6.50
6.50
6.50
7.05
7.05
6.75
6.75
6.75
6.90
7.50
7.50
7.50
7.40
7.40
7.40
7.40
7.40
7.40
7.40
7.40
7.40
7.65
7.85
7.85
8.05
8.05
8.05
8.25
8.25
8.25
8.70
8.85
8.85
9.50
9.50
9.50
9.50
10.85
10.85
10.85
10.85
12.00
13.20
12.50
13.00
13.00
13.00
13.60
13.60
13.60
13.60
14.80
14.80
14.80
14.65
14.65
16.50
17.10
17.10
17.10
* This dimensional data for this size was defined in metric units which, for consistency, has been converted to english units.
A
LOAD
LOAD
Flanges
0.92
0.92
0.90
0.90
0.90
0.84
0.84
0.85
0.85
0.85
0.80
0.91
0.91
0.91
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.84
0.89
0.89
0.81
0.87
0.87
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.89
0.89
0.89
0.89
0.86
0.83
0.83
0.87
0.87
0.87
0.80
0.80
0.80
0.80
0.84
0.84
0.84
0.84
0.84
0.83
0.89
0.89
0.89
9.7
9.7
11.6
11.6
11.6
7.5
6.7
7.5
7.5
7.5
8.1
8.4
8.4
8.4
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
12.0
8.5
8.5
10.2
11.4
11.4
13.9
13.9
13.9
9.9
14.4
14.4
12.7
12.7
12.7
12.7
15.7
15.7
15.7
15.7
16.3
13.3
16.9
16.9
16.9
18.6
18.6
18.6
18.6
17.7
17.7
17.7
19.7
19.7
22.6
22.0
22.0
22.0
6.9
6.9
8.1
9.2
9.2
4.7
3.5
4.7
4.7
4.7
4.9
4.9
4.9
6.9
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
5.7
5.7
9.2
9.2
10.5
6.5
7.3
8.4
8.4
8.4
10.5
11.2
11.2
11.2
11.2
7.3
8.4
11.8
11.1
11.1
11.2
11.2
13.4
13.4
11.1
11.2
11.2
13.4
13.4
13.9
13.6
13.9
13.9
QUALIFICATION
STANDARD
(inches)
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.00
5.00
5.00
6.50
6.00
6.00
6.00
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.75
6.75
6.75
7.75
7.00
7.00
7.00
7.00
7.00
8.00
8.25
8.25
8.25
8.25
8.25
8.25
10.00
10.00
10.00
10.00
11.00
11.00
11.00
11.25
11.25
11.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
14.75
15.50
15.50
15.50
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
10.0
10.0
14.0
14.0
14.0
4.0
4.0
6.0
6.0
6.0
7.0
4.0
6.0
6.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
12.5
6.0
6.0
10.0
12.0
12.0
16.0
16.0
16.0
7.0
16.0
16.0
12.0
12.0 .
12.0
12.0
16.0
16.0
16.0
16.0
16.0
10.0
12.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
16.0
16.0
16.0
20.0
20.0
23.0
20.0
20.0
20.0
0.812
0.812
0.812
0.812
0.812
0.690
0.690
0.750
0.750
0.750
0.850
0.875
0.875
0.875
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.875
1.000
1.000
1.000
1.250
1.150
1.150
1.000
1.000
1.000
1.000
1.250
1.250
1.250
1.250
1.250
1.000
1.000
1.188
1.188
1.188
1.625
1.625
1.625
1.625
1.375
1.375
1.375
1.750
1.750
2.000
2.000
2.000
2.000
0.95
1.50
1.00
1.65
0.61
0.80
0.80
0.90
1.35
0.90
0.90
1.00
1.15
1.15
1.15
1.35
1.35
1.35
1.50
1.50
1.20
1.45
1.45
1.65
1.10
1.10
1.40
1.50
1.75
1.60
1.60
1.00
1.10
1.10
1.40
1.80
1.90
1.90
1.90
2.50
1.75
2.38
2.20
2.20
2.60
2.00
2.00
2.00
2.80
2.70
3.50
3.50
3.50
11.62
11.62
15.62
15.62
15.62
5.38
5.38
7.50
7.50
7.50
8.70
5.75
7.75
7.75
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
14.25
7.75
7.75
11.75
13.75
13.75
18.00
18.00
18.00
9.50
18.30
18.30
14.00
14.00
14.00
14.00
18.50
18.50
18.50
18.50
19.25
12.00
14.00
18.38
18.38
18.38
23.25
23.25
23.25
23.25
18.75
18.75
18.75
23.50
23.50
27.00
24.00
24.00
24.00
MIL-T-5041
TSO-C62
W
WS
DO
DS
H
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
ETRTO
FH DF
A
D
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-504
TSO-C62
33
ETRTO
ETRTO
ETRTO
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
ETRTO
ETRTO
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
Aircraft tire data
BIAS TYPE VII + THREE PART (INCH CODE)
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
34
13
13.5
13.5
14.5
14.5
14.5
15
15
15
15
16
16
16
16
16
16
16
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
19
19
19.5
19.5
19.5
19.5
19.5
H19.5
H19.5
20
20
20
20
*20
20
20
20
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
5.0
6.0
6.0
5.5
5.5
5.5
6.0
6.0
6.0
6.0
4.4
4.4
4.4
4.4
4.4
4.4
4.4
5.75
5.75
5.75
6.25
6.25
6.25
6.25
6.25
4.25
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.7
5.7
5.7
5.75
6.5
4.5
5.25
6.75
6.75
6.75
6.75
6.75
6.75
6.75
4.4
4.4
4.4
4.4
5.25
5.5
5.5
5.5
-4
-4
-4
-6
-6
-6
-6
-6
-6
-6
-8
-8
-8
-6
-6
-6
-6
- 11
- 10
-8
-8
-8
-8
-8
- 11.5
- 10
-8
-8
-8
-8
-8
- 10
- 10
- 11
14
12
14
8
12
14
4
6
6
6
4
6
6
8
8
10
12
12
12
14
8
8
8
10
8
6
6
6
6
8
10
10
10
12
12
6
8
8
8
10
12
14
14
18
20
8
12
10
12
6
8
10
10
10
6
8
8
10
12
14
10
12
14
16
180
230
120
120
160
LS
120
160
120
160
190
210
120
210
120
160
190
120
104 kt
210
190
174 kt
160
190
190
210
210
250
190
210
139 kt
210
160
239 kt
247
250
250
223 kt
230
185
190
210
160
190
190
160
160
195kt
204 kt
199
185
INFLATION APPROX.
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
12.70
13.20
13.20
14.00
14.00
14.55
14.55
14.55
14.55
15.50
15.50
15.50
15.50
15.50
15.50
15.50
16.95
16.95
16.95
16.85
16.85
16.85
16.85
17.30
17.75
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.30
17.30
17.30
17.30
17.30
17.30
17.30
17.30
17.30
17.30
17.40
17.45
19.00
5.25
6.10
6.10
5.50
5.50
5.50
6.30
6.30
6.30
6.30
4.45
4.45
4.45
4.45
4.45
4.45
4.45
5.75
5.75
5.75
6.25
6.25
6.25
6.25
6.10
4.70
4.45
4.45
4.45
4.45
4.45
4.45
4.45
4.45
4.45
5.75
5.75
5.75
5.75
5.75
5.75
5.75
5.70
5.70
5.70
5.75
6.50
4.50
18.90
18.90
18.90
18.90
18.60
18.90
18.90
19.50
19.50
19.50
19.50
20.65
19.55
19.55
19.55
6.75
6.75
6.75
6.75
6.35
6.75
6.75
4.45
4.45
4.45
4.45
5.70
5.70
5.70
5.70
(lbs)
(psi)
(lbs)
3,100
2,450
3,450
143
95
135
9,300
7,350
10,350
3,000
3,550
1,250
1,950
1,950
1,950
1,100
1,700
1,700
2,300
2,300
2,900
3,475
5,000
5,000
6,050
2,900
2,900
2,900
3,750
2,750
2,300
2,100
2,100
2,100
2,850
3,550
3,550
3,550
4,350
4,350
2,250
3,050
3,050
3,050
4,000
5,050
6,200
6,200
8,600
9,000
3,000
5,000
3,500
135
155
45
68
68
68
55
85
85
120
120
155
185
180
180
220
70
70
70
90
140
100
100
100
100
150
185
185
185
225
225
75
105
105
105
140
175
215
215
300
315
105
150
165
9,000
10,650
3,750
5,850
5,850
5,850
3,300
5,100
5,100
6,900
6,900
8,700
10,425
15,000
15,000
18,150
8,700
8,700
8,700
11,250
8,250
6,900
6,300
6,300
6,300
8,550
10,650
10,650
10,650
13,050
13,050
6,750
9,150
9,150
9,150
12,000
15,150
18,600
18,600
25,800
27,000
9,000
15,000
10,500
13.25
13.75
13.75
14.20
14.50
14.50
15.20
15.20
15.20
15.20
16.00
16.00
16.00
16.00
16.00
16.00
16.00
17.50
17.50
17.50
17.50
17.50
17.50
17.50
17.70
18.25
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
18.00
18.00
19.50
2,300
3,300
4,270
4,270
4,270
3,000
4,000
3,400
4,250
5,150
6,500
4,890
6,150
7,200
8,750
61
86
110
110
110
85
120
175
190
225
265
161
180
230
270
6,900
9,900
12,810
12,810
12,810
9,000
12,000
10,200
12,750
15,450
18,000
14,670
18,450
21,600
26,250
19.50
19.50
19.50
19.50
19.20
19.50
19.50
20.00
20.00
20.00
20.00
21.25
20.15
20.15
20.15
W
MIN.
DS
MAX.
WS
MAX.
4.95
5.75
5.75
5.15
5.15
5.15
5.90
5.90
5.90
5.90
4.15
4.15
4.15
4.15
4.15
4.15
4.15
5.40
5.40
5.40
5.90
5.90
5.90
5.90
5.70
4.45
4.15
4.15
4.15
4.15
4.15
4.15
4.15
4.15
4.15
5.35
5.35
5.35
5.35
5.35
5.35
5.35
5.35
5.35
5.35
5.40
6.20
4.25
11.60
12.00
12.00
13.00
13.00
13.00
13.55
13.55
13.55
13.55
14.55
14.55
14.55
14.55
14.55
14.55
14.55
15.80
15.80
15.80
15.45
15.45
15.45
15.45
4.60
5.40
5.40
4.85
4.85
4.85
5.55
5.55
5.55
5.55
3.90
3.90
3.90
3.90
3.90
3.90
3.90
5.10
5.10
5.10
5.50
5.50
5.50
5.50
16.75
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.20
16.20
16.20
16.20
16.20
16.20
16.20
16.20
16.20
16.20
16.20
15.95
18.10
6.20
6.20
6.20
6.20
5.80
6.35
6.35
4.15
4.15
4.15
4.15
5.50
5.35
5.35
5.35
17.45
17.45
17.45
17.45
17.45
17.80
17.80
19.45
19.45
19.45
19.45
19.70
19.30
19.30
19.30
A
LOAD
LOAD
Flanges
5.3
5.35
5.35
4.15
3.90
3.90
3.90
3.90
3.90
3.90
3.90
3.90
3.90
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.10
5.70
4.00
0.88
0.80
0.80
0.77
0.77
0.77
0.73
0.73
0.73
0.73
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.83
0.83
0.83
0.92
0.92
0.92
0.92
0.55
0.87
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.77
0.89
5.95
5.95
5.95
5.95
5.95
5.95
5.95
3.95
3.95
3.95
3.95
4.55
4.75
4.75
4.75
0.85
0.85
0.85
0.85
0.85
0.70
0.70
0.90
0.90
0.90
0.90
0.90
0.89
0.89
0.89
8.1
8.1
8.1
8.1
8.1
8.3
8.3
8.9
8.9
8.9
8.9
9.3
8.6
8.6
8.6
6.1
6.1
6.1
6.1
6.1
6.1
6.9
6.9
6.9
6.9
6.9
6.9
6.9
7.4
7.4
7.4
6.9
6.9
6.9
6.9
8.0
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.6
8.6
5.7
5.7
5.7
5.7
5.7
5.7
4.3
4.3
4.3
6.3
6.3
6.3
6.3
7.2
6.6
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.1
6.1
6.1
6.1
6.0
5.5
5.5
5.5
5.5
5.5
8.0
8.0
8.0
8.0
7.1
7.1
7.1
QUALIFICATION
STANDARD
(inches)
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
4.25
4.75
4.75
4.25
4.25
4.25
5.00
5.00
5.00
5.00
3.50
3.50
3.50
3.50
3.50
3.50
3.50
4.25
4.25
4.25
5.00
5.00
5.00
5.00
5.25
3.63
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
5.25
3.15
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
11.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
11.5
0.750
0.550
0.550
0.875
0.875
0.875
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812
0.812
0.875
0.875
0.875
0.875
0.750
0.750
0.750
0.750
0.813
0.600
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.655
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.40
1.40
1.50
1.50
1.50
1.50
1.25
1.50
0.92
5.50
5.10
5.10
7.75
7.75
7.75
7.50
7.50
7.50
7.50
9.62
9.62
9.62
9.62
9.62
9.62
9.75
9.75
9.75
9.75
7.50
7.50
7.50
7.50
12.63
11.20
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
11.62
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
13.34
5.25
5.25
5.25
5.25
5.25
4.25
4.25
3.50
3.50
3.50
3.50
4.50
4.25
4.25
4.25
8.0
8.0
8.0
8.0
8.0
10.0
10.0
12.0
12.0
12.0
12.0
11.0
10.0
10.0
10.0
0.812
0.812
0.812
0.812
0.812
0.750
0.750
0.812
0.812
0.812
0.812
0.625
0.875
0.875
0.875
1.25
1.25
1.25
1.25
1.25
1.30
1.50
1.30
1.30
1.30
1.30
1.30
1.38
1.38
1.51
9.62
9.62
9.62
9.62
9.62
11.50
11.50
13.62
13.62
13.62
13.62
12.25
11.75
11.75
11.75
0.80
0.75
0.94
1.50
1.50
1.50
0.80
0.85
0.85
0.85
0.80
0.90
0.90
1.05
1.05
1.20
1.80
1.40
1.40
1.55
0.90
0.90
0.90
0.95
1.10
0.85
1.05
1.05
1.05
W
WS
AIR-8505
MIL
MIL
DO
DS
H
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
FH DF
A
D
35
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
36
21
21
21
21
H21
21.5
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
H22
H22
23
23
*23
24
24
24
24
24
*24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7.25
7.25
7.25
7.25
7.25
7.0
5.5
5.5
5.5
5.75
5.75
5.75
6.5
6.5
6.6
6.6
6.6
6.6
6.75
6.75
6.75
6.75
6.75
7.25
7.7
7.75
7.75
7.75
7.75
7.75
7.75
8.0
8.0
8.0
8.0
8.5
8.5
8.5
7.0
7.0
9.0
5.5
5.5
5.5
5.5
6.5
6.6
7.25
7.25
7.25
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
8.0
8.0
- 10
- 10
- 10
- 10
-8
- 10
- 12
- 12
- 12
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 11.5
- 12
-9
- 10
- 10
- 10
- 10
- 10
-8
-8
- 10
- 10
- 11
- 10
- 10
- 12
- 12
-8
- 14
- 12
- 12
- 12
- 13
- 13
8
10
12
20
12
12
8
10
12
8
10
12
8
10
18
18
20
22
8
10
10
12
18
8
16
26
8
8
10
10
12
6
8
10
12
16
12
14
10
12
10
12
12
14
16
18
20
10
10
12
6
10
10
10
12
12
14
14
14
16
16
18
20
18
18
210
225
225
160
139 kt
230
160
190
210
190
200 kt
190 kt
225
160
160
190
190
136 kt
160
275
242
160
190
160
190
190
190
190
217 kt
190
190
210
210
139 kt
200
200
200 kt
160
190
190
190
160
139 kt
225
190
210
190
210
250
210
225
190
215
230 Kt
INFLATION APPROX.
(lbs)
(psi)
(lbs)
4,000
5,150
6,400
12,000
5,650
6,700
4,350
5,700
7,100
4,350
5,700
7,100
3,975
5,200
9,200
10,700
12,000
95
135
166
320
106
135
135
185
250
135
180
220
95
125
260
260
270
12,000
15,450
19,200
36,000
18,950
20,100
13,050
17,100
21,300
13,050
17,100
21,300
11,925
15,600
27,600
32,100
36,000
4,450
5,900
5,900
7,300
10,600
4,600
10,500
12,400
4,700
4,700
5,500
5,500
6,800
2,500
3,500
6,500
7,900
10,000
6,900
8,300
6,500
7,800
5,290
8,070
7,500
9,700
11,500
12,900
6,500
6,600
6,600
8,150
2,950
5,400
5,400
5,400
6,800
6,800
8,200
8,200
8,200
9,725
9,725
11,000
12,900
12,500
12,500
95
125
125
152
245
80
280
305
90
90
110
110
134
40
55
110
135
210
132
156
135
160
80
250
230
300
355
375
294
120
120
164
55
90
90
90
110
110
135
135
135
165
165
195
220
285
285
13,350
17,700
17,700
21,900
31,800
13,800
31,500
37,200
14,100
14,100
16,500
16,500
20,400
7,500
10,500
19,500
23,700
30,000
20,700
24,900
19,500
23,400
15,870
23,000
22,500
29,100
34,500
38,700
19,500
19,800
19,800
24,450
8,850
16,200
16,200
16,200
20,400
20,400
24,600
24,600
24,600
29,175
29,175
33,000
38,700
37,500
37,500
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
21.25
21.25
21.25
21.25
21.00
21.76
22.15
22.15
22.15
22.00
22.00
22.00
22.10
22.10
22.20
22.20
22.20
22.20
22.00
22.00
22.00
22.00
22.00
22.34
22.35
22.20
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
23.20
23.20
24.00
24.15
24.15
24.15
24.15
24.20
23.80
24.50
24.50
24.50
24.15
24.15
24.15
24.15
24.15
24.15
24.15
24.15
24.15
24.15
24.15
24.15
23.75
24.00
24.00
20.60
20.60
20.60
20.60
20.35
21.14
21.55
21.55
21.55
21.40
21.40
21.40
21.35
21.35
21.60
21.60
21.60
21.60
21.30
21.30
21.30
21.30
21.35
21.75
21.75
7.20
7.20
7.20
7.20
7.25
7.05
5.70
5.70
5.70
5.75
5.75
5.75
6.65
6.65
6.80
6.80
6.80
6.80
6.75
6.75
6.75
6.75
6.75
7.43
7.70
7.80
7.75
7.75
7.75
7.75
7.75
8.00
8.00
8.00
8.00
8.50
8.25
8.25
7.20
7.20
9.45
5.70
5.70
5.70
5.70
6.65
6.70
7.50
7.50
7.50
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
7.65
8.00
21.30
21.30
21.30
21.30
21.30
21.30
21.30
21.35
21.35
21.40
21.40
21.40
22.60
22.60
22.40
23.55
23.55
23.55
23.55
23.60
23.00
23.80
23.80
23.80
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.30
23.00
23.00
23.40
W
MIN.
6.80
6.80
6.80
6.80
6.85
6.73
5.35
5.35
5.35
5.40
5.40
5.40
6.25
6.25
6.40
6.40
6.40
6.40
6.35
6.35
6.35
6.35
6.35
7.00
7.25
7.30
7.30
7.30
7.30
7.30
7.55
7.55
7.55
7.55
8.10
7.80
7.80
6.80
6.80
8.85
5.45
5.45
5.45
5.45
6.25
6.30
7.00
7.00
7.00
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.55
DS
MAX.
WS
MAX.
19.25
19.25
19.25
19.25
19.70
18.90
21.30
21.30
21.30
20.20
20.20
20.20
19.90
19.90
20.00
20.00
20.00
20.00
19.85
19.85
19.85
19.85
19.85
22.18
20.25
19.85
19.85
19.85
19.85
19.85
19.85
19.50
19.60
19.85
19.85
19.65
20.80
20.80
21.15
21.15
21.85
23.30
23.30
23.30
23.30
22.40
21.46
22.25
22.25
22.25
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.50
21.28
22.00
22.00
6.35
6.35
6.35
6.35
6.55
6.14
4.95
4.95
4.95
5.05
5.05
5.05
5.65
5.65
6.00
6.00
6.00
6.00
5.95
5.95
5.95
5.95
5.95
7.37
6.80
6.85
6.80
6.80
6.80
6.80
6.80
7.05
7.05
7.05
7.05
7.50
7.45
7.45
6.30
6.30
8.45
4.95
4.95
4.95
4.95
5.90
5.50
6.50
6.50
6.50
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
6.75
7.05
7.05
A
LOAD
LOAD
Flanges
0.78
0.78
0.78
0.78
0.90
0.83
0.89
0.89
0.89
0.87
0.87
0.87
0.91
0.91
0.90
0.90
0.90
0.90
0.89
0.89
0.89
0.89
0.89
0.73
0.67
0.85
0.77
0.77
0.77
0.77
0.77
0.88
0.88
0.75
0.75
0.64
0.73
0.73
0.78
0.78
0.85
0.89
0.89
0.89
0.89
0.75
0.88
0.84
0.84
0.84
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.64
0.64
9.0
9.0
9.0
9.0
8.4
9.0
9.6
9.6
9.6
9.6
9.6
9.6
9.2
9.2
9.4
9.4
9.4
9.4
9.1
9.1
9.1
9.1
9.1
9.2
9.7
9.2
9.1
9.1
9.1
9.1
9.1
8.7
8.7
9.0
9.0
9.4
9.1
9.1
9.9
9.9
9.5
10.6
10.6
10.6
10.6
6.8
6.8
6.8
6.8
9.3
9.3
9.0
9.0
10.2
10.4
10.4
10.4
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.85
10.4
10.4
9.0
8.0
8.0
8.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.4
7.7
7.7
8.0
8.0
8.0
8.0
8.0
8.0
7.2
7.2
7.2
7.2
6.9
6.9
6.9
6.9
6.9
7.8
8.2
6.8
6.8
7.1
7.1
7.1
6.9
6.9
7.8
7.2
7.2
7.8
7.8
QUALIFICATION
STANDARD
(inches)
5.50
5.50
5.50
5.50
4.75
5.90
4.25
4.25
4.25
4.25
4.25
4.25
4.75
4.75
5.50
5.50
5.50
5.50
4.75
4.75
4.75
4.75
4.75
4.63
6.00
4.25
4.75
4.75
4.75
4.75
4.75
6.00
6.00
5.00
5.00
7.25
5.25
5.25
6.25
6.25
7.25
4.25
4.25
4.25
4.25
4.75
5.50
6.25
6.25
6.25
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.75
5.75
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
10.0
10.0
10.0
10.0
8.0
10.0
12.0
12.0
12.0
12.0
12.0
12.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
11.5
12.0
9.0
10.0
10.0
10.0
10.0
10.0
8.0
8.0
10.0
10.0
11.0
10.0
10.0
12.0
12.0
8.0
14.0
14.0
14.0
14.0
14.0
12.0
12.0
12.0
12.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
13.0
13.0
1.000
1.000
1.000
1.000
0.750
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.812
0.812
1.000
1.000
1.000
1.000
0.812
0.812
0.812
0.812
0.812
1.222
1.000
1.125
0.812
0.812
0.812
0.812
0.812
0.875
0.875
0.625
0.625
0.875
0.850
0.850
0.650
0.650
0.875
0.875
0.875
0.875
0.875
0.875
1.000
0.700
0.700
0.700
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
1.000
1.000
1.25
1.40
1.95
2.00
1.95
12.00
12.00
12.00
12.00
9.50
1.25
1.25
1.45
1.25
1.35
1.38
1.20
1.70
2.00
2.00
2.00
2.00
1.10
1.30
2.00
1.50
2.00
1.00
13.75
13.75
13.75
13.75
13.75
13.75
11.62
11.62
12.00
12.00
12.00
12.00
11.62
11.62
11.62
11.62
11.62
13.94
14.00
11.25
11.62
11.62
11.62
11.62
11.62
9.75
9.75
11.25
11.25
12.75
11.70
11.70
13.30
13.30
9.75
15.75
15.75
15.75
15.75
15.75
14.00
13.40
13.40
13.40
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
15.00
15.00
2.15
1.10
1.10
1.10
1.10
1.10
1.10
1.60
1.40
1.80
1.88
1.80
2.14
1.25
1.70
1.75
1.38
1.38
1.38
1.38
1.65
1.80
1.40
1.40
1.80
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.60
1.70
1.70
2.05
2.05
TSO-C62
TSO-C62
MIL-T-5041
W
WS
DO
DS
H
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
FH DF
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MiL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
A
D
37
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
38
B24
C24.5
*24.5
*24.5
25
25
25
25
25
25.5
25.5
*25.5
25.75
25.75
26
26
26
26
26
26
26
26
26
*26
*26
*26
*26
*26
26
26
26
26
26
26
26.5
H26.5
27
27
27
H27
27.5
27.5
27.75
28
28
28
28
28
28
28
29
29
29
*29
H29
29
29
29
29
30
*30
*30
*30
*30
*30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
9.5
8.5
8.5
8.5
6.0
6.75
6.75
6.75
7.75
8.0
8.0
8.75
6.75
6.75
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.75
6.75
7.75
7.75
7.75
7.75
7.75
8.0
8.0
8.75
8.75
10.0
10.0
8.0
8.0
7.75
7.75
7.75
8.5
7.5
8.9
8.75
7.7
7.7
9.0
9.0
9.0
9.0
9.0
6.25
7.7
7.7
8.0
9.0
11.0
11.0
11.0
11.0
6.6
7.7
7.7
7.7
7.7
7.7
- 10.5
- 12
- 14
- 14
- 14
- 10
- 14
- 14
- 10
- 14
- 14
- 14
- 14
- 13
- 13
- 13
- 13
- 13
- 14
- 14
- 11
- 11
- 11
- 11
- 13
- 14
- 15
- 15
- 15
- 14
- 16
- 12.5
- 14.5
- 12
- 12
- 12
- 12
- 14
- 16
- 15
- 15
- 10
- 10
- 10
- 10
18
12
10
12
16
16
18
18
12
18
20
12
14
16
8
10
10
12
14
14
16
14
16
8
10
10
12
14
16
18
12
16
10
12
12
14
10
10
12
16
22
6
24
10
14
8
10
12
22
22
14
12
16
12
16
4
8
10
10
14
12
14
18
22
26
210
160
239 kt
230
250
210
210
210
225
225
200
210
174 kt
239 kt
163 kt
163 kt
LS
LS
160
210
210
225
225
210
275
259
174 kt
160
160
150 kt
187 Kt
210
160
225
INFLATION APPROX.
(lbs)
12,200
8,400
5,710
7,410
12,000
11,000
13,000
13,000
6,900
15,300
16,200
7,140
10,300
11,900
5,300
6,900
6,900
8,600
10,000
10,000
12,000
10,300
11,900
5,600
7,250
8,100
8,950
10,760
12,700
14,480
10,070
11,060
9,700
9,700
9,475
10,975
7,800
7,800
9,650
13,300
20,500
4,300
21,500
7,400
11,000
5,953
7,150
8,800
16,650
18,100
11,050
9,800
13,800
10,030
14,500
2,350
5,000
7,070
7,070
12,950
9,410
11,990
16,510
21,290
24,090
(psi)
(lbs)
160
98
86
110
330
240
300
300
115
275
310
85
237
275
120
155
155
185
225
225
270
230
270
86
110
125
135
161
235
265
105
126
110
140
149
189
160
160
200
207
400
50
320
125
195
65
80
100
235
280
230
160
230
141
197
20
45
60
60
320
165
186
270
360
394
36,600
25,200
17,130
22,230
36,000
33,000
39,000
39,000
20,700
45,900
48,600
21,420
30,900
35,700
15,900
20,700
20,700
25,800
30,000
30,000
36,000
30,900
35,700
16,800
21,750
24,300
26,850
32,280
38,100
43,440
30,210
33,180
29,100
29,100
28,425
32,925
23,400
23,400
28,950
39,900
61,500
12,900
64,500
22,200
33,000
17,859
21,450
26,400
49,950
54,300
33,150
29,400
41,400
30,090
43,500
7,050
15,000
21,210
21,210
38,850
28,230
35,970
49,530
63,870
72,270
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
24.00
24.50
24.50
24.50
25.00
25.50
25.50
25.50
25.00
25.50
25.50
25.60
25.75
25.75
25.75
25.75
25.75
25.75
25.75
25.75
25.75
26.00
26.00
26.30
26.30
26.30
26.30
26.30
26.00
26.00
26.55
26.55
26.00
26.00
26.50
26.50
27.00
27.00
27.00
27.00
27.50
27.70
27.75
27.40
27.40
28.35
28.35
28.35
27.60
27.85
29.02
28.40
28.40
29.70
29.00
29.00
29.00
29.00
29.00
30.32
29.40
29.40
29.40
29.40
29.40
23.30
23.80
23.75
23.75
24.35
24.80
24.80
24.80
24.20
24.80
24.80
24.70
25.10
25.10
25.05
25.05
25.05
25.05
25.05
25.05
25.05
25.30
25.30
25.30
25.50
25.50
25.50
25.50
25.30
25.30
25.75
25.75
25.20
25.20
25.80
25.90
26.30
26.30
26.30
26.30
26.80
27.30
27.05
26.60
26.60
27.36
27.36
27.36
26.80
27.30
28.38
27.60
27.60
29.10
28.20
28.10
28.10
28.10
28.10
29.40
28.60
28.60
28.60
28.60
28.60
9.50
8.50
8.50
8.50
6.15
6.85
6.85
6.85
7.75
8.00
8.00
8.65
6.75
6.75
6.65
6.65
6.65
6.65
6.65
6.65
6.65
6.75
6.75
7.90
7.90
7.90
7.90
7.90
8.00
8.00
8.95
8.95
10.00
10.00
8.00
8.00
7.75
7.75
7.75
8.50
7.50
9.00
8.75
7.85
7.85
9.45
9.45
9.45
8.85
9.10
6.58
7.85
7.85
8.10
9.00
11.00
11.00
11.00
11.00
6.50
7.85
7.85
7.85
7.85
7.85
8.95
8.00
8.00
8.00
5.80
6.45
6.45
6.45
7.30
7.55
7.55
8.25
6.35
6.35
6.25
6.25
6.25
6.25
6.25
6.25
6.25
6.35
6.35
7.45
7.45
7.45
7.45
7.45
7.50
7.50
8.45
8.45
9.45
7.45
7.55
7.55
7.30
7.30
7.30
8.00
7.00
8.67
8.25
7.40
7.40
8.86
8.86
8.86
8.35
8.60
6.26
7.40
7.40
7.90
8.50
10.40
10.40
10.40
10.40
5.95
7.40
7.40
7.40
7.40
7.40
21.60
22.25
21.90
21.90
23.70
23.44
23.44
23.44
23.50
23.14
23.14
22.85
23.65
23.65
23.55
23.55
23.55
23.55
23.55
23.55
23.55
23.85
23.85
23.90
23.90
23.90
23.90
23.90
23.85
23.85
23.75
23.75
23.30
23.30
23.80
25.25
24.85
24.85
24.85
25.70
24.45
24.95
24.60
24.90
24.90
25.39
25.39
25.39
24.80
25.25
27.30
25.90
25.90
27.00
27.70
25.60
25.60
25.60
25.60
28.20
26.90
26.90
26.90
26.90
26.90
8.40
7.50
7.50
7.50
5.00
6.03
6.03
6.03
7.00
6.84
6.84
7.70
5.95
5.95
5.85
5.85
5.85
5.85
5.85
5.85
5.85
5.95
5.95
6.95
6.95
6.95
6.95
6.95
6.00
6.00
7.90
7.90
8.80
8.80
7.00
7.20
6.85
6.85
6.85
7.65
6.60
7.65
7.48
6.95
6.95
8.07
8.07
8.07
7.80
8.00
5.00
6.95
6.95
7.10
8.55
9.35
9.35
9.35
9.35
5.50
6.95
6.95
6.95
6.95
6.95
A
LOAD
LOAD
Flanges
0.71
0.74
0.86
0.86
0.89
0.84
0.84
0.84
0.97
0.72
0.72
0.89
0.87
0.87
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.89
0.89
0.84
0.84
0.84
0.84
0.84
0.75
0.75
0.87
0.87
0.75
0.75
0.85
0.85
0.77
0.77
0.77
0.77
0.64
0.84
0.76
0.85
0.85
0.87
0.87
0.87
0.88
0.75
0.99
0.85
0.85
0.91
0.74
0.87
0.87
0.87
0.87
9.8
9.8
10.0
10.0
11.0
11.2
11.2
11.1
10.3
11.0
11.0
10.3
11.2
11.2
11.2
11.2
11.2
11.2
11.2
11.2
11.2
11.3
11.3
11.1
11.1
11.0
11.0
11.0
11.2
11.2
10.6
10.4
10.3
10.3
11.3
11.3
11.8
11.8
11.8
11.4
12.3
12.0
12.0
11.7
11.7
11.4
11.4
11.4
11.7
11.9
12.6
12.2
12.2
12.6
12.3
11.4
11.4
11.4
11.4
0.85
0.85
0.85
0.85
0.85
12.7
12.7
12.7
12.7
12.7
7.0
7.0
9.2
9.6
9.6
9.6
9.2
9.2
8.9
9.2
9.2
9.4
9.4
9.4
9.4
9.2
9.2
8.6
8.6
9.6
9.6
7.3
7.3
11.0
8.1
10.5
9.2
9.2
8.8
8.8
8.8
9.1
9.9
10.1
10.1
7.2
7.2
7.2
7.2
10.8
10.8
10.8
10.8
10.8
QUALIFICATION
STANDARD
(inches)
6.00
4.50
6.25
6.25
4.27
4.00
4.00
5.00
6.00
5.75
5.75
5.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
6.00
6.00
6.60
6.60
6.60
6.38
6.38
7.25
7.25
8.00
8.00
6.50
5.25
6.00
6.00
6.00
5.50
6.00
6.75
6.00
6.00
6.00
6.63
6.63
6.63
7.00
7.25
5.12
6.00
6.00
6.87
6.00
8.50
8.50
8.50
8.50
5.00
6.00
6.00
6.00
6.00
6.00
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
10.5
12.0
10.0
10.0
14.0
14.0
14.0
14.0
10.0
14.0
14.0
10.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
13.0
13.0
13.0
13.0
13.0
14.0
14.0
11.0
11.0
11.0
11.0
13.0
14.0
15.0
15.0
15.0
14.0
16.0
12.5
14.5
14.0
14.0
12.0
12.0
12.0
12.0
14.0
16.0
15.0
15.0
15.0
15.0
10.0
10.0
10.0
10.0
20.0
16.0
16.0
16.0
16.0
16.0
0.875
0.500
0.812
0.812
0.875
1.000
1.000
1.000
1.000
1.000
1.000
0.910
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
0.700
0.700
0.700
0.700
0.700
1.125
1.125
0.875
1.125
1.000
1.000
1.000
1.000
1.000
1.000
1.000
0.950
1.125
0.875
1.200
1.000
1.000
0.752
0.752
0.752
1.250
1.125
0.875
1.000
1.000
0.950
0.950
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.90
1.75
1.35
1.35
2.00
1.95
2.10
1.50
1.70
1.70
1.40
1.40
1.40
1.50
1.70
1.70
1.70
1.70
1.90
1.31
1.50
1.50
1.50
1.80
2.10
2.10
1.60
1.85
1.551
2.00
1.65
1.65
1.65
2.15
2.38
1.75
1.38
1.50
2.00
2.25
2.25
1.75
2.00
1.75
2.15
1.60
1.60
1.60
1.60
1.75
1.65
1.65
2.15
W
WS
12.25
11.62
11.62
15.75
16.00
16.00
16.00
12.00
16.00
16.00
11.82
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
14.40
14.40
14.40
14.40
14.40
16.25
16.25
12.75
13.25
13.00
13.00
15.00
16.00
17.00
17.00
17.00
15.90
18.25
14.25
16.90
16.00
16.00
13.50
13.50
13.50
14.50
16.25
17.75
17.00
17.00
16.90
16.90
12.00
12.00
12.00
12.00
22.00
18.00
18.00
18.00
18.00
18.00
DO
TSO-C62
DS
H
MIL-T-5041
FH DF
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
A
D
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
MIL-T-5041
39
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
40
30
30
30
30
30
30
*30
30
H30
30
30
30
30
30
30
30
31
H31
31
*31
31
H31
H31
32
32
32
32
32
32
32
32
*32
32
32
*33.5
34
34
H34
34
34
34
34
34
34
34
34
34
*34
34
34
34.5
34.5
H34.5
*35
*35
*35
35
35
*36
*36
*36
36
36
36
36
36
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
8.0
8
8.8
8.8
8.8
8.8
9.0
9.5
9.5
11.0
11.5
11.5
11.5
11.5
11.5
11.5
9.75
9.75
9.75
10.75
11.5
13.0
13.0
8.8
8.8
8.8
8.8
8.8
8.8
8.8
9.75
10.75
11.5
11.5
10.75
9.25
9.25
9.25
9.9
9.9
10.75
10.75
10.75
10.75
11
11
11
11.75
12.0
14.0
9.75
9.75
12.0
9.0
9.0
9.0
10.0
11.5
10.0
10.0
10.0
10.75
11
11
11
11
- 16
- 15
- 14
- 16
- 14
- 14.5
- 14.5
- 14.5
- 14.5
- 14.5
- 14.5
- 13
- 13
- 14
- 14
- 16
- 12
- 12
- 18
- 14
- 15
- 15
- 15
- 16
- 16
- 18
- 16
- 16
- 16
- 16
- 14
- 12
- 12
- 18
- 18
- 14
- 17
- 17
- 17
- 17
- 16
- 18
- 18
- 18
- 16.5
26
26
12
14
16
22
12
16
16
4
20
24
24
26
26
26
12
12
12
20
22
20
20
10
12
14
16
18
20
24
22
12
12
12
12
16
18
18
12
14
10
12
14
16
18
20
22
12
14
24
26
26
14
14
16
18
26
22
16
18
20
16
22
22
24
28
250
225
217 kt
160
210
210
208 kt
215 kt
248
259
220 Kt
160
190
190
275
225
235
160
210
160
210
250
160
210
225
160
210
160
190
190
190
210
225
190
174 kt
203 kt
225 kt
230 kt
160
200
250
201
200
INFLATION APPROX.
(lbs)
20,000
24,100
10,200
12,450
14,200
21,000
12,190
13,700
15,350
3,500
20,960
25,000
25,000
25,000
26,600
25,000
9,075
9,350
11,100
18,710
23,300
17,200
17,200
9,000
11,000
13,000
15,100
17,025
23,700
23,300
23,700
10,760
11,200
11,200
12,200
15,500
17,800
19,400
11,200
14,000
10,870
13,000
15,100
16,500
16,100
18,300
20,500
12,010
11,300
17,300
32,000
30,100
13,100
14,000
16,310
18,730
29,500
23,000
18,010
21,890
23,650
23,000
23,300
23,300
26,500
31,500
(psi)
(lbs)
410
360
139
177
199
295
130
177
202
35
220
245
243
265
265
245
113
90
115
186
275
155
155
115
140
170
200
242
300
335
345
90
120
120
100
155
190
213
115
150
80
96
110
145
145
165
185
80
85
155
360
340
94
150
170
190
280
210
165
190
206
140
200
200
235
290
60,000
72,300
30,600
37,350
42,600
63,000
36,570
41,100
46,050
10,500
62,880
75,000
75,000
75,000
78,000
78,000
26,475
28,050
33,300
56,130
69,900
51,600
51,600
27,000
33,000
39,000
45,300
51,075
71,100
69,900
71,100
32,280
33,600
33,600
35,350
46,500
53,400
58,200
33,600
42,000
32,610
39,000
45,300
49,500
48,300
54,900
61,500
36,030
33,900
51,900
96,000
90,300
39,300
42,000
48,930
56,190
88,500
48,900
54,030
65,670
70,950
69,000
69,900
69,900
78,000
94,500
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
24.80
29.80
30.30
30.30
30.30
30.40
30.00
30.00
30.00
30.00
29.75
29.75
29.75
29.75
29.75
29.75
30.00
31.00
31.00
31.42
31.00
31.00
31.00
31.00
31.00
31.00
31.00
31.00
31.00
31.00
32.00
32.55
32.00
32.00
33.50
34.00
34.00
34.00
33.40
33.40
34.50
34.50
34.50
34.45
33.40
33.40
33.40
34.65
34.00
34.00
34.50
34.50
34.50
35.00
35.00
35.00
35.55
35.00
36.60
36.60
36.60
36.00
35.10
35.10
35.10
35.10
24.49
29.40
29.50
29.50
29.50
29.50
29.30
29.20
29.35
29.20
28.75
28.75
28.75
28.75
28.75
28.75
29.25
30.10
30.10
30.60
30.20
30.10
30.10
30.05
30.05
30.05
30.05
30.05
30.05
30.05
31.30
31.65
31.10
31.10
32.65
33.15
33.15
33.20
32.45
32.45
33.65
33.65
33.65
33.65
32.60
32.60
32.60
33.45
33.10
32.60
33.70
33.70
33.70
33.90
33.90
33.90
34.55
34.10
35.80
35.80
35.80
35.20
34.00
34.00
34.00
34.00
7.96
7.96
8.90
8.90
8.90
8.90
9.57
9.50
9.50
11.00
11.50
11.50
11.50
11.50
11.50
11.50
9.50
9.75
9.75
11.06
11.50
13.00
13.00
8.90
8.90
8.90
8.90
8.90
8.90
8.90
9.75
10.95
11.50
11.50
10.75
9.25
9.25
9.25
10.20
10.20
10.45
10.45
10.45
10.45
11.30
11.30
11.30
12.00
12.00
14.00
9.75
9.75
12.00
9.00
9.00
9.00
10.20
11.50
10.24
10.24
10.24
10.80
11.50
11.50
11.50
11.50
7.30
7.76
8.30
8.30
8.30
8.35
9.13
8.95
8.95
10.40
11.00
11.00
11.00
11.00
11.00
11.00
8.95
9.20
9.20
10.43
10.80
12.30
12.30
8.35
8.35
8.35
8.35
8.35
8.35
8.35
9.20
10.55
10.80
10.80
10.15
8.75
8.75
8.75
9.55
9.55
9.90
9.90
9.90
9.80
10.60
10.60
10.60
11.40
11.35
13.20
9.15
9.15
11.40
8.70
8.70
8.70
9.70
10.90
9.84
9.84
9.84
10.40
10.80
10.80
10.80
10.80
26.90
27.35
27.35
27.35
27.40
27.30
28.30
28.60
27.10
27.00
27.00
27.00
27.00
27.00
27.00
28.30
29.40
29.40
28.27
28.30
27.60
27.60
28.05
28.05
28.05
28.05
28.05
28.05
28.05
29.50
28.55
29.00
29.00
30.20
30.75
30.75
30.75
30.10
30.10
31.15
31.15
31.15
31.10
29.90
29.90
29.90
30.90
30.00
30.50
31.55
31.55
30.90
31.70
31.70
31.70
32.20
31.80
33.30
33.30
33.30
32.10
31.65
31.65
31.65
31.65
6.95
7.85
7.85
7.85
7.90
8.40
8.55
8.55
9.70
10.10
10.10
10.10
10.10
10.10
10.10
8.55
8.80
8.80
9.72
10.10
11.45
11.45
7.90
7.90
7.90
7.90
7.90
7.90
7.90
8.60
9.50
10.50
10.50
9.15
8.15
8.15
8.15
8.80
8.80
8.90
8.90
8.90
8.85
9.95
9.95
9.95
10.20
10.55
12.35
8.40
8.40
10.60
8.30
8.30
8.30
9.00
10.10
9.10
9.10
9.10
8.75
10.10
10.10
10.10
10.10
A
LOAD
LOAD
Flanges
0.86
0.87
0.87
0.87
0.87
0.78
0.84
0.74
0.73
0.66
0.66
0.66
0.66
0.66
0.66
0.89
0.87
0.87
0.79
0.66
0.73
0.73
0.84
0.84
0.84
0.84
0.84
0.84
0.84
0.72
0.84
0.74
0.74
0.87
0.98
0.98
0.87
0.86
0.86
0.89
0.89
0.89
0.88
0.87
0.87
0.87
0.86
0.92
0.79
0.85
0.85
0.85
1.00
1.00
1.00
0.91
0.83
0.91
0.91
0.91
0.90
0.83
0.83
0.83
0.83
12.8
12.9
12.9
12.9
12.9
12.6
12.7
12.8
12.6
12.2
12.5
12.5
12.5
12.5
12.5
12.6
12.6
12.9
13.2
13.2
12.4
12.4
13.3
13.3
13.3
13.3
13.3
13.3
13.3
14.1
13.2
13.5
13.5
13.7
14.3
14.3
14.5
14.2
14.2
14.4
14.4
14.4
14.15
13.9
13.9
13.9
14.0
13.4
13.8
14.9
14.9
14.0
15.1
14.8
15.6
15.6
15.6
15.1
14.7
14.7
14.7
14.7
10.8
10.2
8.2
10.2
10.4
10.4
10.4
10.4
10.4
9.7
11.0
10.9
10.9
10.9
10.9
10.9
10.9
10.9
10.3
10.3
10.4
10.4
10.7
10.7
10.6
10.4
10.4
10.0
10.0
10.0
8.3
11.6
11.6
9.7
11.3
11.3
11.3
11.3
QUALIFICATION
STANDARD
(inches)
6.00
7.00
7.00
7.00
7.00
8.00
7.00
6.25
9.00
9.75
9.75
9.75
9.75
9.75
9.75
7.25
6.50
8.00
9.00
9.00
8.00
8.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.50
9.00
9.00
9.00
8.00
7.00
7.00
6.00
8.00
8.00
8.25
8.25
8.25
8.25
9.00
9.00
9.00
9.13
9.00
11.00
7.50
7.50
8.00
7.25
7.25
7.25
8.62
9.00
8.63
8.63
8.63
9.00
9.00
9.00
9.00
9.00
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
16.0
16.0
15.0
15.0
15.0
15.0
15.0
14.0
16.0
14.0
14.5
14.5
14.5
14.5
14.5
14.5
13.0
13.0
14.0
14.0
16.0
12.0
12.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
18.0
14.0
15.0
15.0
15.0
16.0
16.0
18.0
16.0
16.0
16.0
16.0
16.0
16.0
14.0
14.0
14.0
14.0
12.0
12.0
18.0
18.0
14.0
17.0
17.0
17.0
17.0
16.0
18.0
18.0
18.0
16.5
16.0
16.0
16.0
16.0
1.000
1.125
1.125
1.125
1.125
1.000
1.125
1.100
0.750
1.250
1.250
1.250
1.250
1.250
1.250
1.125
1.000
1.000
1.250
1.250
1.200
1.200
1.125
1.125
1.125
1.125
1.250
1.225
1.125
1.250
1.500
1.250
1.250
1.000
1.125
1.125
1.200
1.250
1.250
1.050
1.050
1.125
1.125
1.500
1.500
1.500
1.100
1.250
1.375
1.250
1.250
0.850
1.100
1.100
1.100
1.375
1.375
1.100
1.100
1.100
1.150
1.375
1.375
1.375
1.375
W
WS
MIL-T-5041
1.70
1.70
2.10
2.40
1.75
2.25
2.20
2.75
2.75
2.75
2.75
2.75
2.75
1.80
2.05
2.15
3.25
2.65
2.70
2.70
1.52
1.65
1.75
1.90
2.53
2.75
2.55
2.00
1.90
1.90
1.90
2.10
2.30
2.50
1.85
1.85
2.14
2.34
2.70
1.75
3.00
2.55
2.55
2.25
2.25
2.25
2.52
2.50
2.38
2.38
2.38
2.13
2.80
2.80
2.90
2.80
17.25
17.25
17.25
17.25
17.00
16.25
18.40
15.50
17.00
17.00
17.00
17.00
17.00
17.00
15.25
15.00
16.00
16.50
18.50
14.40
14.40
18.25
18.25
18.25
18.25
18.50
18.25
18.25
20.50
17.00
17.50
17.50
17.00
18.25
18.25
20.40
18.50
18.50
18.50
18.10
18.50
18.50
17.00
17.00
17.00
16.20
14.50
14.75
20.50
20.50
15.70
19.20
19.20
19.20
19.75
18.75
20.20
20.20
20.20
18.80
18.75
18.75
18.75
18.75
TSO-C62
MIL-T-5041
DO
DS
H
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MiL-T-5041
TSO-C62
TSO-C62
TSO-C62
FH DF
A
D
MIL-T-5041
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
41
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
42
H36
H36
36
*36
37
37
37
37
37
37
37
H37
H37
H37
H37
38
H38
H38
39
39
39
39
39
39
39
39
40
40
40
40
40
40
40
40
40
40
40
40
40
H40
C40
C40
C40
H40
H40
H40
H40
H40
40
40
40
B40
C40
40.5
41
41
H41
42
42
42
42
42
H42
H42
H42
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
12.0
12.0
11.0
13.0
11.5
11.75
11.75
13.0
13.0
13.0
14.0
14.0
14.0
14.0
14.0
11
12.0
13.0
13
13
13
13
13
13
13
13
12
12
12
12
12
14
14
14
14
14
14
14
14
14.0
14.0
14.0
14.0
14.5
14.5
14.5
14.5
14.5
15.5
15.5
16.0
18.0
18.0
15.5
15.0
15.0
15.0
13.0
15
15
15
15
16.0
16.0
16.0
- 16
- 18
- 18
- 12
- 16
- 16
- 16
- 16
- 16
- 16
- 14
- 15
- 15
- 15
- 15
- 19
- 18
- 19
- 21
- 21
- 21
- 19
- 19
- 19
- 19
- 19
- 16
- 16
- 14
- 16
- 17
- 16
- 18
- 18
- 19
- 18
- 19
- 19
- 19
16
18
30
6
28
10
12
20
26
28
24
20
22
24
24
14
20
18
14
14
16
16
18
20
22
24
14
16
18
20
22
14
16
20
22
24
24
28
28
20
22
24
26
22
22
24
26
26
26
28
26
20
20
28
22
24
24
28
18
20
22
24
22
24
26
190
210
262
219
180
225
225
225
225
225
225
235
225
210
225
190
210
225
225
190
210
104 kt
210
210
210
210
225
200
210
225
210
225
225
225
235
235
235
210
225
225
225
225
225
INFLATION APPROX.
(lbs)
16,900
21,525
35,800
6,350
31,200
10,400
13,800
22,200
29,300
32,000
25,000
22,000
24,100
26,700
26,700
15,400
25,275
22,250
15,000
15,000
17,200
17,200
19,400
22,300
24,600
27,400
14,500
18,500
21,000
23,900
26,700
14,500
17,300
22,300
25,000
27,700
27,700
33,500
33,100
27,100
25,400
28,100
30,900
30,100
30,100
33,200
36,800
36,800
36,300
39,500
29,200
27,600
27,500
34,200
28,600
31,400
33,650
35,900
21,400
23,500
26,300
29,000
31,200
34,400
37,800
(psi)
(lbs)
125/109
177
317
29
245
94
165
165
220
240
160
135
145
160
160
130
192
154
100
100
115
115
130
150
165
188
95
130
150
170
190
90
105
135
155
170
170
200
200
166
155
170
185
180
180
200
220
220
180
195
155
130
92
190
170
190
187
205
105
120
135
150
160
175
190
50,700
64,575
107,400
19,050
93,600
31,200
41,400
66,600
87,900
96,000
75,000
66,000
72,300
80,100
80,100
46,200
75,825
66,750
45,000
45,000
51,600
51,600
58,200
66,900
73,800
82,200
43,500
55,500
63,000
71,700
80,100
43,500
51,900
66,900
75,000
83,100
83,100
100,500
99,300
81,300
76,200
84,300
92,700
90,300
90,300
99,600
110,400
110,400
108,900
118,500
87,600
82,800
82,500
102,600
85,800
94,200
100,950
107,700
64,200
70,500
78,900
87,000
93,600
103,200
113,400
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
36.00
36.00
35.80
36.50
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.10
38.00
38.00
38.25
38.25
38.25
38.25
38.25
38.25
38.25
38.25
39.70
39.40
39.40
39.40
39.40
39.80
39.80
39.80
39.80
39.80
39.80
39.80
39.80
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.50
41.00
41.00
41.00
41.25
42.40
42.40
42.40
42.40
42.00
42.00
42.00
35.15
35.20
34.90
35.50
36.10
36.22
36.22
36.10
36.10
36.10
36.05
36.10
36.10
36.10
36.10
36.00
37.20
37.15
37.30
37.30
37.30
37.30
37.30
37.30
37.30
37.30
38.55
38.40
38.40
38.40
38.40
38.85
38.85
38.85
38.85
38.85
38.85
38.85
38.85
39.10
38.90
38.90
38.90
39.10
39.10
39.10
39.10
39.10
39.05
39.05
39.00
39.00
39.10
39.50
40.05
40.05
40.10
40.38
41.40
41.40
41.40
41.40
41.10
41.10
41.10
12.00
12.00
10.40
13.15
11.50
11.80
11.80
13.00
13.00
13.00
14.00
14.00
14.00
14.00
14.00
11.50
12.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
12.35
12.35
12.35
12.35
12.35
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.50
14.50
14.50
14.50
14.50
15.50
15.50
16.00
18.00
18.00
15.50
15.00
15.00
15.00
13.50
15.30
15.30
15.30
15.30
16.00
16.00
16.00
11.35
11.35
9.85
12.44
10.90
11.20
11.20
12.30
12.30
12.30
13.30
13.30
13.30
13.30
13.30
10.80
11.35
12.30
12.25
12.25
12.25
12.25
12.25
12.25
12.25
12.25
11.70
11.70
11.70
11.70
11.70
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
12.00
13.25
13.25
13.25
13.75
13.75
13.75
13.75
13.75
14.75
14.75
15.20
17.15
17.15
14.70
14.25
14.25
14.25
12.80
14.40
14.40
14.40
14.40
15.20
15.20
15.20
34.00
34.20
34.10
32.10
33.20
33.30
33.30
33.20
33.20
33.20
32.85
33.05
33.05
33.05
33.05
33.65
36.10
36.00
34.25
34.25
34.25
34.25
34.25
34.25
34.25
34.25
35.50
35.50
35.50
35.50
35.50
35.10
35.10
35.10
35.10
35.10
35.10
35.10
35.10
36.25
37.35
37.35
37.35
36.25
36.25
36.25
36.25
36.25
35.70
35.70
10.80
10.80
9.35
11.20
10.10
10.40
10.40
11.45
11.45
11.45
12.00
12.30
12.30
12.30
12.30
10.10
10.80
11.70
11.45
11.45
11.45
11.45
11.45
11.45
11.45
11.45
10.90
10.90
10.90
10.90
10.90
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
10.60
10.60
10.60
12.80
12.80
12.80
12.80
12.80
13.65
13.65
35.70
35.85
38.10
36.90
36.90
38.80
37.15
37.65
37.65
37.65
37.65
37.90
37.90
37.90
15.85
15.85
14.00
13.20
13.20
13.50
11.80
13.45
13.45
13.45
13.45
14.10
14.10
14.10
A
LOAD
LOAD
Flanges
0.83
0.75
0.86
0.93
0.72
0.89
0.89
0.81
0.81
0.81
0.83
0.79
0.79
0.79
0.79
0.83
0.79
0.77
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.88
0.87
0.87
0.87
0.87
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.76
0.68
0.68
0.68
0.73
0.73
0.73
0.73
0.73
0.78
0.78
0.82
0.67
0.65
0.79
0.77
0.77
0.73
0.87
0.87
0.87
0.87
0.87
0.72
0.72
0.72
14.75
15.15
15.25
15.6
15.3
15.0
15.0
15.4
15.4
15.4
15.1
15.0
15.0
15.0
15.0
15.7
16.0
15.8
15.8
15.8
15.8
15.8
15.8
15.8
15.8
15.8
16.6
16.6
16.6
16.6
16.6
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.6
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.1
16.1
16.1
16.1
15.6
16.7
17.2
17.2
17.0
17.2
17.3
17.3
17.3
17.3
17.3
17.3
17.3
11.1
10.8
10.8
10.8
10.4
11.0
11.0
11.0
11.0
12.3
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.3
12.3
12.3
12.3
12.3
11.6
11.6
11.6
11.6
11.6
11.6
11.6
11.6
13.4
13.4
13.4
13.1
13.1
13.4
13.4
13.4
11.6
11.6
11.4
12.3
12.3
12.9
QUALIFICATION
STANDARD
(inches)
8.25
7.75
8.50
8.27
9.00
10.00
10.00
9.00
9.00
9.00
11.00
9.00
9.00
9.00
9.00
9.00
7.75
8.50
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
9.00
6.75
6.75
6.75
9.50
9.50
9.50
9.50
9.50
10.00
10.00
12.50
11.00
9.00
11.50
12.75
12.75
9.75
10.50
11.50
11.50
11.50
11.50
9.50
9.50
9.50
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
16.0
18.0
18.0
12.0
16.0
16.0
16.0
16.0
16.0
16.0
14.0
15.0
15.0
15.0
15.0
18.0
19.0
18.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
18.0
18.0
18.0
18.0
18.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
19.0
21.0
21.0
21.0
19.0
19.0
19.0
19.0
19.0
16.0
16.0
14.0
16.0
17.0
16.0
18.0
18.0
19.0
18.0
16.0
16.0
16.0
16.0
19.0
19.0
19.0
1.125
1.200
1.750
1.000
1.375
1.000
1.000
1.375
1.625
1.625
1.500
1.300
1.300
1.300
1.300
1.375
1.300
1.200
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.375
1.500
1.500
1.500
1.500
1.500
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.200
0.800
0.800
0.800
1.400
1.400
1.400
1.400
1.400
1.250
1.250
1.500
1.625
0.800
1.750
1.625
1.625
1.400
1.625
1.500
1.500
1.500
1.625
1.625
1.400
1.400
2.34
2.40
3.20
1.10
3.15
1.63
1.63
2.60
3.20
3.20
3.00
2.70
2.80
3.00
3.00
2.20
2.73
2.40
2.20
2.20
2.30
2.30
2.50
2.75
2.80
3.05
2.38
2.40
2.50
2.60
2.75
2.30
2.40
2.65
2.80
2.95
2.95
3.20
3.20
2.50
2.25
2.25
2.40
2.90
2.90
3.10
3.10
3.10
3.20
3.40
2.38
3.50
2.90
3.00
3.00
2.75
2.75
2.90
3.05
3.10
3.10
3.10
18.50
20.40
21.50
14.00
18.75
18.00
18.00
18.75
19.25
19.25
17.00
17.60
17.60
17.60
17.60
20.75
21.60
20.40
18.50
18.50
18.50
18.50
18.50
18.50
18.50
18.75
21.00
21.00
21.00
21.00
21.00
19.25
19.25
19.25
19.25
19.25
19.25
19.25
19.25
21.40
22.60
22.60
22.60
21.80
21.80
21.80
21.80
21.80
18.50
18.50
17.00
19.25
18.60
19.50
21.25
21.25
21.80
21.25
19.00
19.00
19.00
19.25
22.25
21.80
21.80
W
WS
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
DO
DS
H
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
T50-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
FH DF
A
D
43
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
44
43
H43.5
44
44
44
44
44
44
44.5
44.5
44.5
H44.5
H44.5
H44.5
44.5
H44.5
H44.5
H45
B46
B46
46
46
46
46
46
46
46
46
B46
H46
H46
H46
H46
H46
47
47
47
49
49
49
49
49
49
49
49
49
49
49
49
49
49
H49
H49
H49
50
50
50
50
50
50
50
50
50
50
50
50
50
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
16.0
- 20
16.0
- 21
13
16
16
16
16
16
16.0
- 21
16.5
- 18
16.5
- 18
16.5
- 20
16.5
- 20
16.5
- 20
16.5
- 21
16.5
- 21
16.5
- 21
17.0
- 20
16.0
- 23.5
16.0
- 23.5
16
16
16
16
16
16
16
16
16.0 23.5
18.0
- 20
18.0
- 20
18.0
- 20
18.0
- 20
18.0
- 20
15.75
- 22.1
18.0
- 18
18.0
- 18
17
17
17
17
17
17
17
17
18.0
- 22
18.0
- 22
19.0
- 20
19.0
- 20
19.0
- 20
19.0
- 20
19.0
- 22
19.0
- 22
19.0
- 22
18
20.0
- 20
20.0
- 20
20.0
- 20
20.0
- 20
20.0
- 20
20.0
- 20
20.5
- 20
20.5
- 20
21.0
- 20
21.0
- 20
21.0
- 20
21.0
- 20
28
26
26
18
28
30
30
32
34
30
32
24
26
28
26
26
28
26
30
30
20
22
24
26
28
30
30
32
30
26
28
32
32
34
32
30
36
26
26
28
30
30
32
32
34
30
32
32
34
34
36
24
32
34
26
24
26
30
32
34
36
34
36
28
30
30
30
200
225
200
210
225
225
263
225
225
225
225
225
225
225
225
214
276
225
210
225
225
276
225
225
225
235
235
279
225
250
225
200
210
210
225
225
235
235
235
245
235
225
225
210
225
225
INFLATION APPROX.
(lbs)
38,600
40,600
35,000
20,300
38,400
41,700
41,700
45,000
60,900
42,500
45,800
36,200
39,600
42,800
41,100
41,100
44,700
40,000
53,800
53,800
29,900
32,500
35,700
38,300
41,800
44,800
44,800
48,000
53,800
41,500
44,200
51,100
51,100
55,300
51,500
43,700
54,000
39,600
39,600
43,200
46,700
46,700
50,400
50,400
53,900
50,900
54,800
51,900
55,700
55,700
59,000
41,000
56,600
60,700
41,765
38,200
41,800
49,400
53,800
57,000
60,700
57,800
62,500
46,700
49,000
49,000
49,000
(psi)
(lbs)
215
210
210
100
185
210
210
225
315
195
210
165
180
195
198
198
214
175
260
260
145
155
170
185
210
225
225
245
260
170
180
205
205
220
223
175
215
170
165
180
195
195
210
210
220
219
235
195
215
215
225
155
205
220
155
135
150
175
190
205
215
186
200
150
160
160
160
115,800
121,800
105,000
60,900
115,200
125,100
125,100
135,000
182,700
127,500
137,400
108,600
118,800
128,400
123,300
123,300
134,100
120,000
161,400
161,400
89,700
97,500
107,100
114,900
125,400
134,400
134,400
144,000
161,400
124,500
132,600
153,300
153,300
165,900
131,100
162,000
118,800
118,800
129,600
140,100
140,100
151,200
151,200
161,700
152,700
164,400
155,700
167,100
167,100
177,000
123,000
169,800
182,200
125,295
114,600
125,400
148,200
161,400
171,000
182,100
173,400
187,500
140,100
147,000
147,000
147,000
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
43.00
43.50
43.55
43.25
43.25
43.25
43.25
43.25
44.50
44.50
44.50
44.50
44.50
44.50
44.50
44.50
44.50
45.00
46.00
46.00
45.25
45.25
45.25
45.25
45.25
45.25
45.25
45.25
46.00
46.00
46.00
46.00
46.00
46.00
48.10
46.90
46.90
48.75
48.75
48.75
48.75
48.75
48.75
48.75
48.75
49.00
49.00
49.00
49.00
49.00
49.00
49.00
49.00
49.00
49.40
50.00
50.00
50.00
50.00
50.00
50.00
51.95
51.95
50.00
50.00
50.00
50.00
42.10
42.55
42.30
42.30
42.30
42.30
42.30
42.30
43.50
43.50
43.50
43.50
43.50
43.50
43.50
43.50
43.50
44.00
45.10
45.10
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
45.10
45.00
45.00
45.00
45.00
45.00
47.20
46.00
46.00
47.70
47.70
47.70
47.70
47.70
47.70
47.70
47.70
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.40
49.00
49.00
49.00
49.00
49.00
49.00
51.00
51.00
49.00
49.00
49.00
49.00
16.00
16.00
13.50
16.00
16.00
16.00
16.00
16.00
16.00
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
17.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
18.00
18.00
16.00
18.00
18.00
17.25
17.25
17.25
17.25
17.25
17.25
17.25
17.25
18.00
18.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
17.50
20.00
20.00
20.00
20.00
20.00
20.00
20.45
20.45
21.00
21.00
21.00
21.00
15.20
15.20
12.80
15.05
15.05
15.05
15.05
15.05
15.20
15.70
15.70
15.70
15.70
15.70
15.70
15.70
15.70
16.20
15.20
15.20
15.05
15.05
15.05
15.05
15.05
15.05
15.05
15.05
15.20
17.15
17.15
17.15
17.15
17.15
14.05
17.25
17.25
16.40
16.40
16.40
16.40
16.40
16.40
16.40
16.40
17.15
17.15
18.15
18.15
18.15
18.15
18.15
18.15
18.15
16.70
19.10
19.10
19.10
19.10
19.10
19.10
19.70
19.70
20.05
20.05
20.05
20.05
38.90
41.25
39.45
38.20
38.20
38.20
38.20
38.20
40.70
39.70
39.70
40.10
40.10
40.10
42.20
42.20
42.20
40.50
42.20
42.20
40.70
40.70
40.70
40.70
40.70
40.70
40.70
40.70
42.20
41.30
41.30
41.30
41.30
41.30
43.40
41.60
41.60
43.00
43.00
43.00
43.00
43.00
43.00
43.00
43.00
46.30
46.30
43.80
43.80
43.80
43.80
46.30
46.30
46.30
44.00
44.60
44.60
44.60
44.60
44.60
44.60
46.25
46.25
44.60
44.60
44.60
44.60
14.15
14.40
11.80
13.70
13.70
13.70
13.70
13.70
14.10
14.50
14.50
14.55
14.55
14.55
14.80
14.80
14.80
15.00
14.10
14.10
14.10
14.10
14.10
14.10
14.10
14.10
14.10
14.10
14.10
15.85
15.85
15.85
15.85
15.85
14.05
16.34
16.34
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
16.20
16.20
16.70
16.70
16.70
16.70
17.10
17.10
17.10
15.35
17.60
17.60
17.60
17.60
17.60
17.60
18.10
18.10
18.50
18.50
18.50
18.50
A
LOAD
LOAD
Flanges
0.72
0.70
0.87
0.80
0.80
0.80
0.80
0.80
0.74
0.81
0.81
0.75
0.75
0.75
0.71
0.71
0.71
0.74
0.71
0.71
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.71
0.73
0.73
0.73
0.73
0.73
0.82
0.81
0.81
0.84
0.84
0.84
0.84
0.84
0.84
0.84
0.84
0.75
0.75
0.77
0.77
0.77
0.77
0.71
0.71
0.71
0.84
0.75
0.75
0.75
0.75
0.75
0.75
0.78
0.78
0.72
0.72
0.72
0.72
17.9
18.2
18.4
17.9
17.9
17.9
17.9
17.9
18.4
18.4
18.4
18.3
18.3
18.3
18.5
18.5
18.5
18.5
19.4
19.4
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.65
18.8
18.8
18.8
18.8
18.8
19.9
19.2
19.2
20.2
20.2
20.2
20.2
20.2
20.2
20.2
20.2
20.6
20.6
20.3
20.3
20.3
20.3
20.2
20.2
20.2
20.5
20.6
20.6
20.6
20.6
20.6
20.6
21.25
21.25
20.2
20.2
20.2
20.2
13.8
13.7
12.5
12.5
12.5
12.5
12.5
13.4
13.0
13.0
14.2
14.2
14.2
14.0
14.2
14.7
14.7
13.6
13.6
13.6
13.6
13.6
13.6
13.6
13.6
14.3
14.5
14.5
14.5
14.5
12.5
12.5
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.5
14.5
14.5
14.5
16.5
16.5
16.5
14.3
13.6
13.6
13.6
13.6
13.6
13.6
14.6
14.6
14.6
14.6
QUALIFICATION
STANDARD
(inches)
13.00
10.50
11.00
13.25
13.25
13.25
13.25
13.25
10.50
13.25
13.25
10.50
10.50
10.50
10.50
10.50
10.50
11.00
10.50
10.50
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
10.50
11.00
11.00
11.00
11.00
11.00
12.75
14.75
14.75
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.25
13.75
13.75
13.25
13.25
13.25
13.25
12.00
12.00
12.00
14.25
16.25
16.25
16.25
16.25
16.25
16.25
16.25
16.25
13.25
13.25
13.25
13.25
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
20.0
21.0
20.0
18.0
18.0
18.0
18.0
18.0
21.0
18.0
18.0
20.0
20.0
20.0
21.0
21.0
21.0
20.0
23.5
23.5
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
23.5
20.0
20.0
20.0
20.0
20.0
22.1
18.0
18.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
22.0
22.0
20.0
20.0
20.0
20.0
22.0
22.0
22.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
1.750
1.600
1.875
1.625
1.625
1.625
1.625
1.625
1.250
1.250
1.250
1.625
1.500
1.500
1.600
1.600
1.600
1.600
1.250
1.250
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.250
1.600
1.625
1.625
1.625
1.700
1.750
1.625
1.625
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.875
1.875
1.625
1.875
1.875
1.875
1.700
1.700
1.700
1.750
1.875
1.875
1.875
1.875
1.875
1.875
1.874
1.874
1.875
1.750
1.750
1.750
3.45
3.31
3.15
3.00
3.25
3.40
3.40
3.55
3.55
3.73
3.25
3.45
3.50
3.30
3.30
3.40
3.25
2.85
2.94
3.00
3.10
3.25
3.40
3.40
3.55
3.15
3.35
3.55
3.80
3.80
3.80
3.75
3.05
3.25
3.35
3.50
3.50
3.65
3.65
3.80
3.75
3.95
3.75
3.95
3.95
3.95
3.50
3.95
4.15
3.50
3.40
3.50
3.95
3.95
4.15
4.30
3.95
4.20
3.50
3.60
3.60
3.60
23.50
24.20
23.75
21.25
21.25
21.25
21.25
21.25
23.50
20.50
20.50
23.25
23.00
23.00
24.20
24.20
24.20
23.20
26.00
26.00
23.25
23.25
23.25
23.25
23.25
23.25
23.25
23.25
26.00
23.20
23.20
23.20
23.20
23.40
25.60
21.25
21.25
23.50
23.50
23.50
23.50
23.50
23.50
23.50
23.50
25.75
25.75
23.25
23.75
23.75
23.75
25.40
25.40
25.40
23.50
23.75
23.75
23.75
23.75
23.75
23.75
23.75
23.75
23.75
23.50
23.50
23.50
W
WS
MIL-T-5041
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
DO
DS
H
FH DF
A
D
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
MIL-T-5041
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
MIL-T-5041
TSO-C62
45
Aircraft tire data
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
52
52
52
52
52
52
54
54
H54
H54
56
56
56
56
x
x
x
x
x
x
x
x
x
x
x
x
x
x
20.5
20.5
20.5
20.5
20.5
20.5
21.0
21.0
21.0
21.0
16
16
16
20.0
- 20
- 20
- 20
- 23
- 23
- 23
- 23
- 23
- 24
- 24
- 20
34
36
38
26
28
30
32
36
34
36
24
32
38
24
225
235
235
235
235
174 kt
250
250
210
INFLATION APPROX.
(lbs)
57,800
62,500
65,300
55,000
59,500
63,700
61,300
68,500
68,100
72,200
45,000
60,000
76,000
38,500
(psi)
(lbs)
185
200
210
165
180
195
202
223
200
212
178
250
315
110
173,400
187,500
195,900
165,000
178,500
191,100
183,900
205,500
204,300
216,600
135,000
180,000
228,000
115,500
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
52.00
52.00
52.00
52.00
52.00
52.00
54.00
54.00
54.00
54.00
55.90
55.90
55.90
56.00
51.00
51.00
51.00
51.00
51.00
51.00
53.00
53.00
53.00
53.00
54.80
54.80
54.80
54.80
20.50
20.50
20.50
20.50
20.50
20.50
21.00
21.00
21.00
21.00
16.20
16.20
16.20
20.00
19.60
19.60
19.60
19.60
19.60
19.60
20.10
20.10
20.10
20.10
15.50
15.50
15.50
19.10
46.25
46.25
46.25
46.80
46.80
46.80
50.90
50.90
51.00
51.00
50.85
50.85
50.85
49.50
18.05
18.05
18.05
18.05
18.05
18.05
18.90
18.90
18.90
18.90
14.26
14.26
14.26
17.60
A
LOAD
LOAD
Flanges
0.79
0.79
0.79
0.71
0.71
0.71
0.74
0.74
0.72
0.72
0.88
0.88
0.88
0.91
21.3
21.3
21.3
21.3
21.3
21.3
22.5
2.5
22.2
22.2
24.1
24.1
24.1
22.7
14.3
14.3
14.3
15.9
15.9
15.9
18.7
18.7
18.7
15.2
QUALIFICATION
STANDARD
(inches)
16.25
16.25
16.25
13.00
13.00
13.00
16.25
16.25
13.00
13.00
12.75
12.75
12.75
15.50
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
20.0
20.0
20.0
23.0
23.0
23.0
23.0
23.0
24.0
24.0
28.0
28.0
28.0
20.0
1.875
1.875
1.875
1.875
1.875
1.500
1.500
2.000
2.000
1.800
2.250
2.250
2.250
1.800
3.95
4.20
4.55
3.25
3.25
3.25
3.80
4.20
4.25
4.25
3.88
4.60
4.60
3.40
23.75
23.75
23.75
26.75
26.75
26.00
26.00
27.00
28.00
27.60
32.50
32.50
32.50
23.60
W
WS
DO
TSO-C62
DS
H
TSO-C62
TSO-C62
MIL-T-5041
MIL-T-5041
TSO-C62
FH DF
A
D
46
47
BIAS THREE PART (METRIC CODE)
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
355
355
360
360
360
380
380
380
420
450
450
545
545
550
550
550
605
615
615
615
640
670
670
750
750
750
790
960
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
* Inches.
120
150
135
135
135
150
150
150
150
190
190
175
175
250
250
250
155
225
225
225
170
210
210
230
230
230
275
345
-5
-4
-6
-6
-6
-4
-4
-5
- 6.5
-5
-5
- 254
- 254
-6
-6
-6
- 13
- 10
- 10
- 10
- 14
- 12
- 12
- 15
- 15
- 15
- 15
- 18
8
4
12
14
16
6
8
6
6
10
22
10
12
8
10
12
10
10
12
12
14
8
10
12
14
18
20
26
160
190
120
244
160
262
262
INFLATION APPROX.
(kg)
800
550
1,355
1,590
1,400
630
856
725
510
1,590
4030
2,400
2,855
1,440
1,890
2,400
2,940
2,630
3,240
3,240
3,540
1,930
3,040
4,940
5,965
7,620
8,650
12,240
(bar)
(kg)
5.0
2.7
10.7
12.4
13.5
2.6
4.0
3.1
2.5
5.2
15.5
7.6
9.1
2.9
4.1
5.0
11.3
6.3
7.7
7.7
12.5
5.7
7.4
9.9
11.8
15.5
14.7
11.7
2,400
1,650
4,065
4,770
4,200
1,890
2,568
2,175
1,530
4,770
12,090
7,200
8,565
4,320
5,670
7,200
8,820
7,890
9,720
9,720
10,620
5,790
9,120
14,820
17,895
22,860
25,950
36,720
STATIC
ASPECT
RATIO LOADED RADIUS
(mm)
RIM DESCRIPTION
(mm)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
361
14.42*
367
367
367
392
392
387
437
465
465
553
553
560
560
560
613
625
625
625
650
680
680
765
765
765
800
978
347
13.42*
355
355
355
375
375
371
420
445
445
537
537
540
540
540
594
605
605
605
630
655
655
745
745
745
775
948
126
6.50*
139
139
139
155
155
150
150
195
195
179
179
255
255
255
164
230
230
230
175
215
215
235
235
235
285
350
118
5.75*
131
131
131
145
145
140
134
185
185
171
171
245
245
245
153
220
220
220
165
200
200
220
220
220
265
330
319
107
0.93
332
332
332
310
310
346
394
405
405
480
480
500
500
500
566
540
540
540
595
615
615
710
710
710
764
870
125
125
125
140
140
135
135
175
175
156
156
205
205
205
148
195
195
195
155
190
190
190
190
190
255
315
0.77
0.77
0.77
0.94
0.94
0.87
0.91
0.87
0.87
0.84
0.84
0.80
0.80
0.80
0.86
0.81
0.81
0.81
0.84
0.87
0.87
0.87
0.87
0.87
0.87
0.87
AT RATED
LOAD
145
142
169
169
169
152
152
150
178
180
182
228
228
220
220
220
260
260
260
260
285
290
290
325
325
325
345
418
QUALIFICATION
STANDARD
(mm)
A
D
Width Between Specified Rim
Flanges
Diameter
88.9
112.0
108.0
108.0
108.0
128.0
128.0
95.0
96.2
160.0
160.0
159.0
159.0
210.0
210.0
210.0
138.0
200.0
200.0
200.0
127.0
176.0
176.0
178.0
178.0
178.0
228.0
275.0
127.0
101.6
152.4
152.4
152.4
101.6
101.6
127.0
165.1
127.0
127.0
254.0
254.0
152.4
152.4
152.4
330.2
254.0
254.0
254.0
355.6
304.8
304.8
381.0
381.0
381.0
381.0
457.2
FH
G
DF
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
19.1
16.0
22.2
22.2
22.2
18.0
18.0
13.3
18.4
18.0
24.0
19.0
19.0
22.0
22.0
22.0
20.3
22.5
22.5
22.5
25.4
20.0
20.0
24.0
24.0
24.0
31.8
30.0
20.3
20.0
38.0
38.0
38.0
25.0
25.0
18.0
19.0
35.0
66.0
35.0
35.0
42.0
42.0
42.0
40.0
40.0
40.0
40.0
42.0
52.0
52.0
55.0
55.0
55.0
65.0
90.0
165.2
133.6
196.8
196.8
196.8
137.6
137.6
153.6
201.9
163.0
175.0
292.0
292.0
196.4
196.4
196.4
370.8
299.0
299.0
299.0
406.4
344.8
344.8
429.0
429.0
429.0
444.6
517.2
TSO-C62
TSO-C62
AIR-8505
AIR-8505
Aircraft tire data
RADIAL CIVIL THREE PART (INCH CODE)
TIRE DESCRIPTIONS
SIZE
N
M
48
14.5 x
16
x
16
x
17.5 x
20
x
23.5 x
25.75 x
26
x
26
x
26
x
27
x
29
x
29
x
30
x
32
x
32
x
H34 x
40
x
H40 x
42
x
43
x
45
x
45
x
46
x
47
x
49
x
49
x
50
x
50
x
52
x
5.5
4.4
4.4
5.75
4.4
8.0
6.75
6.6
6.6
6.6
7.75
7.7
7.7
8.8
8.8
8.8
10.0
14.0
14.5
17.0
17.5
16.0
18.0
17.0
15.75
17.0
17.0
20.0
20.0
21.0
D
R6
R8
R8
R8
R 12
R 12
R 14
R 14
R 14
R 14
R 15
R 15
R 15
R 15
R 16
R 16
R 16
R 16
R 19
R 18
R 17
R 20
R 17
R 20
R 22.1
R 20
R 20
R 22
R 22
R 22
PLY
RATING
10
12
14
14
14
12
14
14
12
16
16
10
12
14
22
24
26
32
28
36
30
32
30
32
26
32
36
APPLICATION RATING
SPEED
INDEX
MAX. STATIC
LOAD
(mph)
(lbs)
225
190
190
225
190
190
210
210
210
225
225
225
225
225
190
190
190
225
225
235
235
225
235
225
279
225
225
235
235
235
3,250
2,900
3,525
3,375
6,000
9,425
10,300
8,600
10,000
10,000
9,650
12,350
13,800
14,340
9,000
11,000
13,400
25,630
32,200
36,100
45,500
42,000
50,300
46,000
51,500
48,145
50,400
45,200
57,100
66,500
INFLATION
PRESSURE
(UNLOADED)
(inches)
DG
WG
DSG
ASPECT
RATIO
WSG
GROWN STATIC
LOADED RADIUS
MAX.
MIN.
15.00
16.40
16.40
18.00
20.40
24.25
26.35
26.32
26.32
26.32
27.70
29.08
29.10
31.17
31.80
31.80
34.85
41.02
41.30
43.50
44.55
45.66
46.60
47.50
49.37
50.26
50.26
51.75
51.75
53.85
5.75
4.65
4.65
6.00
4.65
8.35
7.05
6.92
6.92
6.92
8.10
8.16
8.20
9.26
9.25
9.25
10.40
14.56
15.10
17.70
18.20
16.64
18.75
17.70
16.7
17.94
17.94
20.80
20.80
21.85
13.40
15.55
14.90
17.00
19.80
23.00
25.15
24.02
24.02
24.02
25.40
26.55
26.55
29.55
28.70
28.70
32.95
36.08
39.05
40.95
41.80
42.07
43.65
44.75
47.64
44.21
44.21
48.80
48.80
50.70
5.05
4.20
4.10
5.26
4.10
7.50
6.35
6.08
6.08
6.08
7.15
7.18
7.20
8.33
8.20
8.20
9.35
12.48
13.06
15.95
16.40
14.64
16.85
15.95
11.28
15.08
15.08
18.75
18.75
19.70
0.77
0.90
0.90
0.83
0.90
0.72
0.87
0.88
0.88
0.88
0.77
0.85
0.85
0.86
0.84
0.84
0.90
0.86
0.73
0.71
0.74
0.76
0.78
0.77
0.82
0.84
0.84
0.70
0.70
0.71
6.45
6.80
6.90
7.88
8.75
10.55
11.60
11.60
11.60
11.60
12.20
12.55
12.70
13.50
13.60
13.60
14.75
17.30
17.40
18.33
18.65
19.45
19.50
20.15
20.25
21.15
21.15
21.90
21.90
22.75
6.15
7.05
7.20
7.54
9.05
10.10
11.20
11.15
11.15
11.15
11.75
12.05
12.20
12.91
13.00
13.00
14.00
16.40
16.60
17.42
17.65
18.54
18.45
19.20
20.05
20.05
20.83
20.83
21.60
QUALIFICATION
STANDARD
(inches)
(inches)
(psi)
177
155
207
145
265
212
237/199
185
225
225
200
199
230
203
115
140
130
157
200
194
215
222
216
222
223
200
210
177
220
227
RIM DESCRIPTION
A
D
Flanges
Diameter
4.25
3.50
3.50
4.25
3.50
6.25
5.00
5.00
5.00
5.00
6.00
6.00
6.00
7.00
7.00
7.00
7.00
11.00
9.50
14.00
13.25
13.25
14.00
13.25
12.75
13.25
13.25
15.00
15.00
16.00
6.0
8.0
8.0
8.0
12.0
12.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
16.0
19.0
18.0
17.0
20.0
17.0
20.0
22.1
20.0
20.0
22.0
22.0
22.0
FH
G
DF
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
0.875
0.812
0.812
0.875
0.812
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.125
1.125
1.125
1.125
1.625
1.400
1.625
1.750
1.750
2.125
1.875
1.750
1.875
1.875
1.875
1.875
2.125
1.50
1.20
1.20
1.40
1.00
2.145
1.70
1.50
1.70
1.70
1.65
1.65
1.65
2.10
1.50
1.65
2.15
2.95
3.10
3.30
3.891
3.75
4.20
3.70
3.75
3.95
3.95
3.15
3.15
3.750
7.75
9.62
9.62
9.75
13.624
14.00
16.00
16.00
16.00
16.00
17.00
17.00
17.00
17.25
18.25
18.25
18.25
19.25
21.80
21.25
20.50
23.50
21.25
23.75
25.62
23.75
23.75
25.75
25.75
26.25
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSS 5.3
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
RADIAL CIVIL THREE PART (METRIC CODE)
TIRE DESCRIPTIONS
SIZE
N
M
435
915
1050
1270
1270
1400
1400
1400
x
x
x
x
x
x
x
x
190
300
395
455
455
530
530
530
D
R5
R 16
R 16
R 22
R 22
R 23
R 23
R 23
PLY
RATING
10
20
28
30
32
32
36
40
APPLICATION RATING
SPEED
INDEX
MAX. STATIC
LOAD
(mph)
(lbs)
190
225
235
225
225
235
235
235
3,600
21,000
34,200
50,900
54,800
61,300
68,500
74,950
INFLATION
PRESSURE
(UNLOADED)
(inches)
DG
WG
DSG
ASPECT
RATIO
WSG
GROWN STATIC
LOADED RADIUS
MAX.
MIN.
18.20
37.00
42.65
51.55
51.55
56.85
56.85
56.85
8.00
12.30
16.15
18.75
18.75
21.70
21.70
21.70
15.70
34.90
40.00
18.60
18.60
53.45
53.45
53.45
7.15
10.80
14.20
15.00
15.00
19.10
19.10
19.10
0.81
0.84
0.82
0.78
0.78
0.76
0.76
0.76
7.30
15.43
17.55
21.55
21.55
23.60
23.60
23.60
6.85
14.70
16.60
20.50
20.50
22.35
22.35
22.35
QUALIFICATION
STANDARD
(inches)
(inches)
(psi)
87
186
190
219
235
202
223
249
RIM DESCRIPTION
A
D
Flanges
Diameter
6.30
9.00
11.50
13.75
13.75
16.25
16.25
16.25
5.0
16.0
16.0
22.0
22.0
23.0
23.0
23.0
FH
G
DF
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
0.710
1.375
1.750
1.875
1.875
2.000
2.000
2.500
1.25
2.60
3.60
3.75
3.95
3.80
4.20
3.50
6.42
18.75
19.50
25.75
25.75
27.00
27.00
28.00
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
TSO-C62
W
WS
DO
DS
H
FH DF
A
D
49
Aircraft tire data
RADIAL MILITARY THREE PART (INCH CODE)
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
18 x
20 x
20 x
22 x
23.5 x
25.5 x
27.75 x
28 x
30.5 x
30 x
30 x
30 x
30 x
36 x
36 x
37 x
7.75
4.4
8.5
7.75
7.5
8.0
8.75
9.5
10.5
11.5
11.5
11.5
7.7
11.0
11.0
11.5
R6
R 12
R 6.5
R9
R 10
R 14
R 14.5
R 15
R 17
R 14.5
R 14.5
R 14.5
R 16
R 16
R 18
R 18
14
26
22
20
24
24
26
26
22
30
28
235
255
253
242
248
250
259
235
265
210 kts
276
250
189
190
261
248
INFLATION APPROX.
(lbs)
(psi)
(lbs)
6,340
6,500
10,300
12,400
14,000
16,200
21,500
20,683
22,682
25,000
27,090
26,600
12,016
23,300
35,800
36,000
235
265
308
305
290
310
320
348
328
302
276
319
362
200
305
275
25,600
47,200
43,540
42,800
31,970
42,490
47,570
58,800
67,200
67,700
54,000
68,300
82,340
87,600
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
18.00
20.40*
20.80*
22.20
24.31*
25.50
27.75
28.00*
31.38*
29.43*
29.43*
31.00*
29.40
35.10
36.00
38.00*
DO
MIN.
21.45
24.80
27.05
28.60
34.00
34.90
W
MAX.
7.75
4.65*
8.66*
7.80
7.87*
8.00
8.75
9.50*
10.28*
11.50*
11.50*
11.50*
7.85
11.50
11.00
11.96*
W
MIN.
7.05
7.55
8.25
7.40
10.80
9.45
DS
MAX.
WS
MAX.
17.44
19.80*
18.78*
20.74
21.73*
23.14
24.60
26.70*
29.65*
27.68*
27.68*
27.54*
26.90
31.65
34.53
36.00*
6.97
7.80*
5.70
6.92*
6.84
7.48
8.55*
9.00*
10.20*
10.20*
10.20*
6.95
10.10
7.78
10.76*
A
LOAD
LOAD
Flanges
0.77
0.90
0.79
0.85
0.90
0.72
0.76
0.68
0.64
0.65
0.65
0.72
0.85
0.83
0.86
0.83
7.4
4.4
9.0
9.7
10.6
11.4
11.9
6.3
7.4
9.2
9.8
9.7
12.3
9.5
12.1
13.2
14.4
14.8
15.60
9.6
10.3
10.4
12.8
12.60
QUALIFICATION
STANDARD
(inches)
5.75
3.50
6.25
6.25
5.75
5.75
6.00
7.50
8.25
9.75
9.75
9.75
6.00
9.00
8.50
9.00
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
6.0
12.0
6.5
9.0
10.0
14.0
14.5
15.0
17.0
14.5
14.5
14.5
16.0
16.0
18.0
18.0
0.875
0.812
1.125
1.125
1.000
1.000
1.200
1.125
1.250
1.250
1.250
1.250
1.000
1.375
1.750
1.750
1.30
1.38
2.25
2.10
2.64
2.75
2.75
2.75
2.90
3.30
7.75
13.624
8.75
11.25
12.00
16.00
16.90
17.25
19.50
17.00
17.00
17.00
18.00
18.75
21.50
21.50
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
MIL-T-5041
AIR 8505
MIL-T-5041
MIL-T-5041
MIL-T-5041
W
WS
DO
DS
H
FH DF
A
D
* Grown dimensions.
50
51
RADIAL MILITARY THREE PART (METRIC CODE)
TIRE DESCRIPTIONS
SIZE
N
M
D
PLY
RATING
APPLICATION RATING
SPEED
INDEX
(mph)
360
360
360
365
435
490
520
535
550
600
615
615
615
750
750
790
790
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
135
135
135
150
190
155
140
250
200
155
225
225
225
230
230
275
275
R6
R6
R6
R4
R5
R9
R 10.5
R6
R 10
R 13
R 10
R 10
R 10
R 15
R 15
R 15
R 15
233
224
177
206
228
189
177
244
224
233
162
206
244
262
224
242
226
INFLATION APPROX.
(lbs)
2,585
2,686
3,136
1,855
4,080
3,561
2,922
4,316
6,297
7,857
7,081
7,980
7,576
13,600
16,267
19,040
21,450
(psi)
(lbs)
130
138
232
72
108
232
348
87
218
184
104
123
102
192
215
232
392
7,868
7,868
12,140
8,093
16,299
24,700
31,500
21,357
28,663
22,481
24,700
29,225
24,700
40,465
48,334
65,000
101,000
STATIC
ASPECT
RATIO LOADED RADIUS
(inches)
RIM DESCRIPTION
(inches)
DO
MAX.
DO
MIN.
W
MAX.
W
MIN.
DS
MAX.
WS
MAX.
14.40
14.40
14.40
14.70
17.50
19.60
20.75
21.50
22.00
23.95
24.65
24.65
24.65
29.95
29.95
31.60
31.60
13.95
13.95
13.95
14.05
16.75
19.00
20.15
20.60
21.30
23.30
23.80
23.80
23.80
29.10
29.10
30.60
30.60
5.45
5.45
5.45
6.10
7.70
6.30
5.70
10.15
8.10
6.30
9.10
9.10
9.10
9.35
9.35
11.15
11.15
5.15
5.15
5.15
5.75
7.25
5.90
5.35
9.50
7.65
5.95
8.60
8.60
8.60
8.80
8.80
10.50
10.50
13.05
13.05
13.40
12.95
15.50
17.90
19.55
19.05
20.10
22.20
22.30
22.30
22.30
27.55
27.55
29.60
29.60
4.95
4.95
4.80
5.45
6.95
5.65
5.00
9.10
7.30
5.65
8.20
8.20
8.20
8.40
8.40
9.80
9.80
A
LOAD
LOAD
Flanges
0.77
0.77
0.77
0.88
0.81
0.84
0.90
0.76
0.74
0.87
0.80
0.80
0.80
0.80
0.80
0.74
0.74
6.0
6.0
6.4
5.8
6.7
8.9
9.8
8.6
9.7
10.1
10.1
10.3
9.9
12.5
12.5
13.3
14.0
4.4
4.4
4.6
3.3
3.5
6.3
7.0
4.3
6.7
8.0
6.6
6.5
6.5
9.5
9.5
9.5
9.8
QUALIFICATION
STANDARD
(inches)
4.25
4.25
4.25
5.00
6.30
5.25
4.25
8.27
6.00
5.25
7.75
7.75
7.75
7.00
7.00
9.00
9.00
D
FH
G
DF
Specified Rim
Diameter
Flange
Height
Min. Ledge
Width
Outer Flange
Diameter
6.0
6.0
6.0
4.0
5.0
9.0
10.5
6.0
10.0
13.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
0.875
0.875
0.875
0.710
0.710
1.000
1.000
0.866
0.875
0.800
0.875
0.875
0.875
0.950
0.950
1.250
1.375
7.75
7.75
7.75
5.42
6.42
11.00
12.50
7.73
11.75
14.60
11.75
11.75
11.75
16.90
16.90
17.50
17.75
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
AIR 8505
52
The application information presented within this manual is based on the most current information available and is
intended for use as a general reference only. Any inquiries regarding specific model aircraft should be directed to the
applicable airframe manufacturer. Your requirements may vary depending on the actual configuration of your aircraft.
All Michelin aircraft tires are manufactured in accordance with TSO-C62, MIL-T-5041 or AIR8505A and/or applicable
airframe manufacturer specifications. Additionally, all tires sizes included in this manual may not necessarily be
available from Michelin. Contact your Michelin representative for specific tire information and availability.
Failure to make this verification and to install unapproved tires on a aircraft may result in tire failure causing property
damage, serious injury, or loss of life.
53
BUSINESS, PERSONAL, UTILITY AND REGIONAL AIRCRAFT
Manufacturer
Model
Popular Name
Speed
Rating
Main Gear
Tire Size
(mph)
AERO TECHNOLOGY
OF AUSTRALIA
N-22
N-24
LS
LS
AEROSPATIALE
54
MS760
TB-10
TB-20
TB-21
ALON
415
F-1A
AYRES CORPORATION S2R
S2R15
BEAGLE AVIATION B 121
B 206
BEECH
BE 17
BE 17R
BE 18
BE 18H
BE 19
BE 23, II, III
BE 23C
BE 24
BE 24-R
BE 33
BE 33A
BE 35
BE 35B
BE 36
BE 50
BE B55
BE C55
BE E55
BE 56TC
BE 58
BE 60
BE 65
BE 70
BE 76
BE 77
BE 80
BE 88
BE 90
BE 95
BE 99
BE C99
BE F90
BE 100
BE 200
BE 200 Alt
BE 2000
BE 300/350
BE 400 A
BE 1900
BE 1900C
BE 1900D
BELLANCA
14
17-30A
17-31A
17-31ATC
260A
Codes: TT: Tube Type
TL: Tubeless
Jet
Tobago
Trinidad
Trinidad
Ercoupe
Aircoupe
Thrush
Turbo Thrush
Pup
Stagger Wing
Stagger Wing:
Twin Beech
Twin Beech
Musketeer
Musketeer
Sundowner
Super Musketeer
Super Sierra
Bonanza
Bonanza
Bonanza
Bonanza
Bonanza
Twin Bonanza
Baron
Baron
Baron
Baron
Baron
Duke
Queen Air
Queen Air
Duchess
Skipper
Queen Air
Queen Air
King Air
Travelair
Airliner
Airliner
King Air
King Air
Super King Air
Super King Air
Starship I
Super King Air
Beech Jet
Airliner
Airliner
Airliner
Cruzmaster
Viking
Super Viking
Turbo Viking
Bellanca
190
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
160
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
LS
160
160
160
160
210
160
160
LS
LS
LS
LS
LS
LS
TT/TL
Tire Size
Rating
8.00-6
8.00-6
26 x 6.6
6.00-6
15 x 6.0-6
15 x 6.0-6
5.00-5
6.00-6
8.50-10
29 x 11.0-10
6.00-6
6.00-6
6.00-6
15 x 6.0-6
11.00-12
8.50-10
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
7.00-6
7.00-6
7.00- 6
7.00-6
7.00-6
8.50-10
6.50-8
6.50-8
6.50-8
650-8
19.5 x 6.75-8
19.5 x 6.75-8
8.50 x 10
8.50 x 10
6.00-6
15 x 6.0-6
8.50-10
8.50-10
8.50-10
7.00-6
18 x 5.5
18 x 5.5
18 x 5.5
18 x 5.5
18 x 5.5
22 x 6.75-10
19.5 x 6.75-10
22 x 6.75-10
24 x 7.7
22 x 6.75-10
22 x 6.75-10
22 x 6.75-10
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
LS: Low Speed (Less than 160 mph)
8
8
6
6
6
4
4
10
10
4
4
6
4
8
8
4
4
4
4
4
6
6
6
6
6
8
8
8
8
10
10
8
8
6
4
8
8
8
6
5
10
8
8
8
8
10
8
16
8
8
10
6
6
6
6
6
Manufacturer
Auxiliary Gear
Ply
Ply
TT/TL
Rating
TT
TT
8.00-6
8.00-6
8
8
TT
TT
TL
TT
TT
TT
TT
TT
TL
TL
TT
TT
TT
TT
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TL
TL
TT
TT
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
17.5 x 6.25-6
5.00-5
5.00-5
5.00-5
5.00-5
6.00-6
12.5 x 4.5
12.5 x 4.5
6.00-6
6.00-6
5.00-5
5.00-5
14.50”
8.50-10
6.00-6
6.00-6
6.00-6
15 x 6.0-6
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
6.50-10
5.00-5
6.00-5
5.00-5
5.00-5
15 x 6.0-6
15 x 6.0-6
6.50-10
6.50-10
5.00-5
5.00-5
6.50-10
6.50-10
6.50-10
5.00-5
6.50-10
6.50-10
22 x 6.75-10
6.50-10
22 x 6.75-10
22 x 6.75-10
19.5 x 6.75-8
19.5 x 6.75-8
18 x 4.4
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
6.00-6
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
6.00-6
8
6
6
6
4
4
4
4
4
4
4
4
8
8
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
4
4
6
6
6
6
6
6
6
6
6
6
8
6
8
8
10
10
10
10
10
10
4
6
6
6
4
TT
TT
TT
TT
TT
TT
CH: Single Chine
DCH: Dual Chine
Popular Name
Speed
Rating
design
(mph)
BELLANCA
BERIEV
Tailwheel
Tailwheel
TT
TT
TT
TT
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TT
TT
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
Model
Special
BAE SYSTEMS
BOMBARDIER
(Canadair)
CESSNA
7CBC
7ECA
7GCAA
7KCAB
8GCBC
8KCAB
Viking
BE103
BE103 alt
BE200
BE32
748
HS-125
BAe 125
Jetstream 3100
Jetstream 3200
Jetstream 4100
CL-215/ 215T
CL-415
CL-600/601
CL-601-3A/ 601-3R
CL-601-3A/ 601-3R
CL-604
CRJ-100/200
CRJ-700
Global Express
T-50
120, 140
150, 152
170
172
172
172Q
R172
172RG
175
177
177RG
180
182, T182
182RG, T182RG
185
188
188 Alt
195
205
206
207
206, 207 Alt
208, 308
208, 308
210
T210, P210
T303
T303 Aft
305
310, T310
320, 340
336
TL: Tubeless
Citabria
Citabria
Citabria
Citabria
Scout
Decathlon
Viking
LS
LS
LS
LS
LS
LS
LS
120
Intercity
Series ≤ 700
Series ≤ 700
Jetstream 31
Jetstream 32
Jetstream 41
Water Bomber
Water Bomber
Challenger
Challenger
Challenger (Flotation)
Challenger
Regional Jet
Regional Jet
Bobcat
Commuter, Aerobat
Skyhawk
Skyhawk II
Cutlass
Hawk XP
Cutlass RG
Skylark
Cardinal
Cardinal RG
Skywagon
Skylane
Skylane RG
Skywagon
AG Wagon
AG Wagon
Station Air 6, 8
Skywagon
Station Air 6, 8
Caravan
Caravan (Flotation)
Centurion
Turbo, Press
Crusader
Crusader
Bird Dog
Skymaster
160
210
210
160
160
160
160
160
210
210
210
210
210
210
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
Main Gear
Tire Size
Auxiliary Gear
Ply
TT/TL
Tire Size
Rating
7.00-6
6.00-6
6.00-6
7.00-6
8.50-6
6.00-6
6.00-6
500 x 150
7.00-6
950 x 300
720 x 320(-10)
32 x 10.75-14
23 x 7.0-12
23 x 70-12
28 x 9.0-12
28 x 9.0-12
22 x 6.75-10
15.00-16
15.00-16
26 x 6.6
26 x 6.6
25.75 x 6.75-14
H27 x 8.5-14
H29 x 9.0-15
H36 x 12.0-18
H38 x 12.0-19
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
15 x 6.0-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
15 x 6.0-6
6.00-6
22 x 8.0-8
8.50-10
6.00-6
6.00-6
6.00-6
6.00-6
8.00-6
650-10
8.50-10
6.00-6
6.00-6
6.00-6
6.50-8
8.00-6
6.50-8
6.50-10
18 x 5.5
TT/TL
Rating
4
4
4
4
4/6
4
6
TT
TT
TT
TT
6
TT
12
10
10
12
12
12
16
16
14
14
14
16
16
18
20
4
4
4
4
4
4
6
4
6
4
6
6
6
6
6
6
6
6
6
6
6
8
6
8
8
8
8
8
8
6
6
6
8
Ply
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TT
TT
TT
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
6.00-6
400 x 150
620 x 180
500 x 150
8.50-10
18 x 4.25-10
18 x 4.25-10
6.00-6
6.00-6
17 x 6.25-6
6.50-10
6.50-10
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
H20.5 x 6.75-10
21 x 7.25-10
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
8.00”
5.00-5
5.00-5
10.00”
8.00”
10.00”
5.00-5
5.00-5
5.00-5
6.00-6
6.00-6
6.50-8
22 x 8.0-8
5.00-5
5.00-5
6.00-6
6.00-6
8 x 3.0-4
6.00-6
6.00-6
15 x 6.0-6
CH: Single Chine
4
4
4
4
4
4
4
8/10
6
6
8
8
8
10
10
12
12
12
12
12
12
4
4
4
4
4
4
4
4
4
4
4
4
6
6
4
8
6
8
6
6
6
8
4
8
6
6
10
6
4
4
4
6
Special
design
TT
TT
TT
TT
TT
TT
TT
TL
TL
TL
TL
TL
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
DCH: Dual Chine
CH
CH
CH
CH
CH
CH
CH
CH
Tailwheel
55
Manufacturer
Model
Popular Name
Speed
Rating
CESSNA
DASSAULT AVIATION
56
DE HAVILLAND Canada
(Bombardier)
FAIRCHILD-DORNIER
EMBRAER
337
340A
401, 402
404
406
411
414
421
425
441
500, 501
525
550, 551
S550
560
560
650
680
750
FALCON 10
FALCON 100
FAICON 20
FALCON 20
FALCON 200
FALCON 200
FALCON 50, 50EX
FALCON 50, 50EX
FALCON 900, B, EX
FALCON 2000
FALCON 2000 EX
DHC-6
DHC-6
DHC-7
DHC-7
DHC-8-100/200 series
DHC-8-300
DHC-8-300
DHC-8-400
DO 128-2
DO 228
DO 228-100
DO 228-200
DO 228-212
DO 328-100
DO 328-100
DO 328-300/310
CBA123
EMB-110/ 111
EMB-120
EMB-120 ER
EMB-135 / 145 ER
EMB 145 LR
EMB 170
EMB-202
TL: Tubeless
Super Skymaster
Titan
Caravan II
Chancellor
Golden Eagle
Corsair/Conquest I
Conquest II
Citation I
Citation Jet
Citation II
Citations SII
Citation V
EXCEL
Citation III, VI, VII
Sovereign
Citation X
Twin Otter
Twin Otter (Flotation)
Dash 7
Dash 7 (Flotation)
Dash 8
Dash 8 (Flotation)
Dash 8 (Flotation)
Dash 8
Dash 8
Q400
Sky Servant
228-100
228-200
Turbo Prop
Turbo Prop
Jet
Vector
Bandeirante
Brasilia
Brasilia
19.0 / 20.6 T
22.0T
Ipanema
Main Gear
Tire Size
TT/TL
(mph)
Rating
LS
LS
LS
160
LS
160
LS
LS
LS
160
190
190
190
190
190
190
190
190
210
190
190
210
210
210
210
210
210
225
225
225
160
160
160
160
160
160
190
190
190
18 x 5.5
8
6.50-10
8
6.50-10
8
22 x 7.75-10
10
8.50-10
8
6.50-10
8
6.50-10
8
6.50-10
8
6.50-10
10
22 x 7.75-10
10
22 x 8.0-10
10
22 x 7.75-10
8
22 x 8.0-10
10/12
22 x 8.0-10
12
22 x 8.0-10
12
23.5 x 8.0 R12
12
22 x 5.75-12
10
26 x 6.6 R14
12
26 x 6.6 R14
14
22 x 5.75-12
8
22 x 5.75-12
8
26 x 6.6 R14
14
26 x 6.6
10
26 x 6.6 R14
14
26 x 6.6
10
26 x 6.6 R14
14
26 x 6.6
14
29 x 7.7 R15
26 x 6.6 R14
14
26 x 6.6 R14
14
11.00-12
8
15.00-12
10
30 x 9.0-15
10
33.5 x 10.75-15 12
26.5 x 8.0-13
12
31 x 9.75-13
12
H31 x 9.75-13
12
31 x 9.75-14
12
H31 x 9.75-14
12
H36 x 12.0-16
12
8.50-10
8
25.5 x 8.75-10
10
25.5 x 8.75-10
10
25.5 x 8.75-10
12
8.50-10
10
24 x 7.7
14
25.5 x 8.75-10
14
26 x 6.6 R14
14
22 x 6-75-10
10
670 x 210-12
10
24 x 7.25-12
10
24 x 7.25-12
12
30 x 9.5-14
16
H30 x 9.5-16
16
H38 x 13.0-18
18
8.50-10
6
LS
160
160
160
190
190
210
160
160
190
190
210
210
225
LS
Manufacturer
Auxiliary Gear
Ply
Tire Size
Ply
TT/TL
Rating
TT
TT
TT
TL
TT
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TT
15 x 6.0-6
6.00-6
6.00-6
6.00-6
22 x 8.0-8
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
16 x 4.4
16 x 4.4
18 x 5.75-8
18 x 5.75-8
14.5 x 5.5 R6
14.5 x 5.5-6
14.5 x 5.5 R6
14.5 x 5.5-6
14.5 x 5.5 R6
14.5 x 5.5-6
17.5 x 5.75 R8
14.5 x 5.5 R6
14.5 x 5.5 R6
8.90-12.5
8.90-12.5
6.50-10
24 x 7.7
18 x 5.5
22 x 6.5-10
22 x 6.5-10
22 x 6.5-10
22 x 6.5-10
22 x 6.5-10
5.50-4
6.00-6
6.00-6
6.00-6
6.00-6
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
16 x 4.4
6.50-8
18 x 5.5
18 x 5.5
19.5 x 6.75-8
19.5 x 6.75-8
24 x 7.7
10.00”
CH: Single Chine
6
6
6
6
6
6
6
6
6
6
10
6
10
10
10
10
10
10
10
8
8
14
14
14
6
6
10
10
8
6
6
6
6
6
8
8
8
8
6
10
10
10
6
8
8
8
8
8
12
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT/TL
TT/TL
TT
TT
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TL
TL
TL
TT
TT
TL
TL
TL
TL
TL
TT
DCH: Dual Chine
Model
Popular Name
Speed
Special
Rating
design
(mph)
FAIRCHILD
/SWEARINGEN
DCH
DCH
DCH
DCH
DCH
DCH
DCH
CH
CH
DCH
DCH
CH
CH
CH
CH
CH
CH
CH
CH
CH
SA-226
SA-226 Alt
SA-227
SA-227 AC
SA-227 TT
SA-227 AT
SA-227 DC
FUJI FA-200
KM-2
GRUMMAN
G-111
Government A/C Factories N22 / N24
GULFSTREAM
112
AEROSPACE
112 TC
1121
114
GA-7
690, A, B
690C
AA-1B
AA-5
AA-5A
AA-5B
AE-1121
AE-200
AE-500, B, U, S
AE-560, 560A
AE-560E, F
AE-680 T
AE-680 T Alt
AE-680 V
AE-680 W
AE-680, 680E
AE-680FL
AE-680FP
At-681
AE-685
AE-720
AR-680F
AR-680FLP
G-158
G-159
G-1159
CH G-1159 S
G-1159B
G-1159C
G-1159C SP
HAWKER SIDDELEY 1C
1E, 2E, 3B
HS-125
HS-748
HELIO
H-250
H-250
H-250
H-295
H-295
H-395
H-395
H-550A
H-634
H-700
H-800
TL: Tubeless
Metro/Merlin
Metro/Merlin
Merlin I
Merlin III
Merlin III
Merlin IV
Merlin 23
Albatross
Nomad
160
160
160
160
190
160
160
LS
LS
160
120
LS
LS
Commodore Jet
Cougar
Jetprop Commander
Jetprop Commander
Trainer
Travelar
Cheetah
Tiger
Jet Commander
Commander
Commander
Commander
Commander
Turbo Commander
Turbo Commander
Commander
Grand Commander
Commander
Commander
Grand Commander P
AG-CAT
Gulfstream I
Gulfstream II
Gulfstream II S
Gulfstream III
Gulfstrearn IV
Gulfstream IV SP
Trident
Trident
AVRO
Courier
Courier II
Courier (XWD)
Super Courier
Super Courier (XWD)
Courier
U10A/Courier
Stallion
Twin Stallion
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
210
210
210
225
225
210
210
210
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
Main Gear
Tire Size
Ply
Auxiliary Gear
TT/TL
Tire Size
Rating
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
6.50-8
6.50-8
40 x 12
8.00-6
6.00-6
7.00-6
24 x 7.7
7.00-6
6.00-6
8.50-10
8.50-10
6.00-6
6.00-6
6.00-6
6.00-6
24 x 7.7
7.00-6
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
7.50-14
34 x 9.25-16
34 x 9.25-16
34 x 9.25-16
34 x 9.25-16
H34 x 9.25-18
34 x 9.5-18
36 x 10.0-18
23 x 7.0-12
32 x 10.75-14
8.00-6
8.00-6
6.50-8
8.00-6
6.50-8
8.00-6
8.00-6
7.50-10
7.50-10
7.50-10
8.00-6
10
10
10
10
10
10
10
6
6
14
8
6
6
16
6
6
8
10
4
4
4
6
16
6
8
6
8
10
8
8
8
8
8
8
8
8
8
8
8
6
12
16
18
18
18
18
14
16
10
12
4
4
6
6
6
4
4
8
8
8
4
Ply
TT/TL
Rating
TL
TL
TL
TT
TT
TT
TT
TT
TT
TL
TT
TT
TL
TL
TT
TT
TT
TT
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TT
TT
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
16 x 4.4
18 x 4.4
5.00-5
5.00-5
26 x 6
8.00-6
5.00-5
5.00-5
16 x 4.4
5.00-5
5.00-5
6.00-6
15 x 6.0-6
5.00-5
5.00-5
5.00-5
5.00-5
16 x 4.4
5.00-5
6.00-6
6.00-6
6.00-6
16 x 4.4
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
10.00”
6.50-8
21 x 7.25-10
21 x 7.25-10
21 x 7.25-10
21 x 7.25-10
21 x 7.25-10
29 x 8.0-15
29 x 8.0-15
18 x 4.25-10
8.50-10
10.00”
10.00”
10.00”
10.00”
10.00”
10.00”
10.00”
5.00-5
5.00-5
5.00-5
10.00”
CH: Single Chine
6
10
10
10
10
10
10
4
4
10
8
4
6
4
6
4
6
6
4
4
4
4
4
4
6
6
6
4
6
6
6
6
6
6
6
6
6
6
6
8
6
8
10
10
10
10
12
12
6
10
8
8
8
8
8
8
8
4
4
4
8
DCH: Dual Chine
Special
design
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TL
TT
TT
TL
TT
TT
TT
TT
TT
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TT
TT
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
CH
CH
CH
CH
CH
CH
57
CH
CH
CH
CH
CH
Manufacturer
Model
Popular Name
Speed
Rating
IAI1
ICA2-BRASOV
I ILYUSHIN
I IPTN
LAKE
LEARJET
58
LET
LOCKHEED
MAULE
MITSUBISHI
MOONEY
1121
1123
1124
1125
ARAVA
Galaxy
IAR-823
IL 114
N250
C-1
C-2
LA 250/ 270
LA-4
LA-4
LA-4-200
Learjet 23
Learjet 24
Learjet 25
Learjet 31
Learjet 35
Learjet 36
Learjet 54
Learjet 55
Learjet 56
Learjet 60
L-410/ L-420
L-610G
SA60
LG-1329
Jetstar II
M-4
M-4 210
M-4 220
M-5 180
M-5 210
M-5 220
M-5 235
M-6
M-7 235
MU-2
MU-2
MU-300
M18
MO-20A
MO-20C
MO-20D
MO-20E
MO-20G
MO-20J
M0-20K
MO-20L
MO-20M
MO-21
MO-21C
MO-22
M020F
MSE
TLS
Jet Commander
Jet Commander
Westwind
Astra
Skimmer
Skimmer
Renegade
Buccaneer
Amphibian
Amphibian
Learjet
Learjet
Learjet
Learjet
Learjet
Learjet
Learjet
Learjet
Learjet
Learjet
Azacarte-60
Jetstar
Jetstar II
Jetasen
Rocket
Strata Rocket
Lunar Rocket
Lunar Rocket
Strata Rocket
Lunar Rocket
Super Rocket
Solitaire
Marquis
Diamond I
Mite
Mark A
Ranger
Master
Chaparral
Stateman
201
Turbo 231
Mark 21
Super
Mustang
Executive
1. IAI: Israel Aircraft Industries
2. ICA: Interprinderea de Constructii Aeronautice
TL: Tubeless
Main Gear
Tire Size
TT/TL
(mph)
Rating
160
160
160
160
160
210
LS
24 x 7.7
16/18
24 x 7.7
14
B24 x 9.5-10.5
18
23 x 7.0-12
10
11.00-12
10
26 x 6.6 R14
14
6.00-6
6
880 x 315(-14.2)
TL
TL
TL
TL
TL
TL
TT
TL
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
18 x 5.5
18 x 5.5
18 x 5.5
17.5 x 5.75-8
17.5 x 5.75-8
17.5 x 5.75-8
17.5 x 5.75-8
17.5 x 5.75-8
17.5 x 5.75-8
17.5 x 5.75-8
12.50-10
1050 x 390-480
6.50-8
26 x 6.6
26 x 6.6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
8.50-10
8.50-10
24 x 7.7
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
TT
TT
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
190
LS
LS
LS
LS
LS
LS
210
210
210
210
210
210
210
210
210
210
LS
LS
200
200
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
210
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
4
4
6
4
4
6
10
10
10
12
12
12
14
14
14
14
4
14
14
4
4
4
4
4
4
4
4
8
8
12
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Manufacturer
Auxiliary Gear
Ply
Tire Size
Ply
TT/TL
Rating
16 x 4.4
16 x 4.4
16 x 4.4
16 x 4.4
9.00-6
18 x 4.4
5.00-5
620 x 180(-12)
7.00-8
5.00-4
5.00-4
5.00-5
5.00-4
5.00-4
5.00-4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
9.00-6
720 x 310-10
6.00-6
18 x 4.4
18 x 4.4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
8 x 3.5-4
5.00-5
5.00-5
18 x 4.4
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
15.00-6
5.00-5
5.00-5
5.00-5
CH: Single Chine
4
4
4
6
10
10
6
16
4
4
4
4
4
4
10
10
10
10
10
10
10
10
10
10
4
10
12
6
6
10
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
TL
TL
TL
TL
TL
TL
TT
TL
TT
TT
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
Speed
design
(mph)
NAVION
NORD
PARTENAVIA
PIAGGIO
CH
PILATUS
PILATUS
BRITTEN-NORMAN
PIPER
DCH
DCH
DCH
DCH
DCH
DCH
DCH
DCH
DCH
DCH
CH
CH
TailwheeL
TailwheeL
TailwheeL
TailwheeL
TailwheeL
TailwheeL
TailwheeL
TailwheeL
TailwheeL
DCH: Dual Chine
Popular Name
Rating
CH
TT
TT
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
Model
Special
DCH
A Through H
N262
P.68C
P136
P149
P166
P180
PC-6
PC-6 Alt
PC-12
PC-12 Alt
BN-2A
BN-2A MkIII
BN-2B-20
600/601B (PA60)
601P (PA60-601P)
602P (PA60-602P)
700P (PA60-700P)
J-2
J-3
J-4
J-5
PA-11
PA-12
PA-14
PA-15
PA-16
PA-17
PA-18-135
PA-18-150
PA-18-150 Alt
PA-18-150 Alt
PA-19
PA-20
PA-22
PA-22
PA-23-160-235
PA-23-250
PA-24-180
PA-24-250, 260, 400
PA-25-150
PA-225-235, 236, 260
PA-28-140
PA-28-150
PA-28-151, 161
PA-28-160
PA-28-180
PA-28-181
PA-28-235
PA-28-235
PA-28-236
PA-28R / 200 / 201
PA-28 RT-201 / 201T
PA-30
PA-31
PA-31-350
PA-31P
PA-31P-350
PA-31 T-500
TL: Tubeless
Rangemaster
Mohawk
Victor
Avanti
Turbo Porter
Islander
Trislander
Islander
Aerostar
Aerostar
Aerostar
Aerostar
Cub
Cub
Coupe
Cruiser
Cub SpeciaL
Cub Super Cruiser
Cub Family Cruiser
Cub Vagabond
Cub Clipper
Cub Vagabond
Super Cub
Super Cub
Super Cub
Super Cub
Pacer
Pacer
Colt
Tri Pacer
Apache
Aztec
Comanche
Comanche
Pawnee
Pawnee
Cherokee
Cherokee
Warrior / Cadet
Cherokee 160
Cherokee
Archer II
Cherokee
Pathfinder 235
Dakota 236
Arrow,Arrow I,ArrowII
Arrow II & IV, Dakota
Twin Comanche
Navajo & Navajo C/R
Chieftian
Pressurized Navajo
Mojave
Cheyenne
LS
LS
LS
160
160
160
160
LS
LS
160
160
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
Main Gear
Tire Size
Auxiliary Gear
Ply
TT/TL
Tire Size
Rating
6.00-6
39 x 13
6.00-6
8.50-10
8.50-10
8.50-10
6.50-10
7.50-10
11.00-12
8.50-10
11.00-12
7.00-6
7.00-6
16 x 7.7
6.50-8
6.50-8
6.50-8
6.50-8
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
8.00-4
6.00-6
7.00-6
8.00-6
6.00-6
6.00-6
6.00-6
6.00-6
7.00-6
7.00-6
6.00-6
6.00-6
7.00-6
8.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.50-10
6.50-10
6.50-10
6.50-10
6.50-10
Ply
TT/TL
Rating
6
14
6
8
8
8
12
8
8
10
6
6
6
TT
TL
TT
TT
TT
TT
TL
TT
TT
TL
TL
TL
TL
8
8
8
8
4
4
4
4
4
4
4
4
4
4
4
4
6
4
4
6
6
6
6
8
4
6
4
4
4
4
4
4
4
4
4
4
4
6
6
6
8
8
8
8
10
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
6.00-6
9.00-6
5.00-5
6.00-6
6.00-6
6.00-6
5.00-5
5.00-4
5.00-4
17.5 x 6.25-6
17.5 x 6.25-6
7.00-6
7.00-6
16 x 7.7
6.00-6
6.00-6
6.00-6
6.00-6
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6x2
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
8 x 3.0-4
8 x 3.0-4
6.00-6
6.00-6
5.00-5
6.00-6
6.00-6
5.00-5
6.00-6
5.00-5
5.00-5
5.00-5
5.00-5
6.00-6
6.00-6
6.00-6
6.00-6
17.5 x 6.25-6
6.00-6
CH: Single Chine
Special
design
6
10
6
6
6
6
8
6
6
8
8
6
6
TT
TL
TT
TT
TT
TT
TL
TT
TT
TL
TL
TL
TL
6
6
6
6
TT
TT
TT
TT
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
6
6
6
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
8
10
6
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
DCH: Dual Chine
59
Manufacturer
Model
Popular Name
Speed
Rating
Main Gear
Tire Size
(mph)
PIPER
PROMAVIA
PZL-MIELEC
PZL-WARSZAWA
60
RAYTHEON
REIMS
ROBIN (APEX)
ROCKWELL
INTERNATIONAL
SMB-SCANIA
PA-31 T-620
PA-31 T2
PA-31 T-1
PA-31 T-1 500
PA-32 6-300
PA-32-260 / 300
PA-32-301/ 301T
PA-32RT-300
PA-34-200
PA-36
PA-38
PA-39
PA-42-720
PA-42
PA-44-180/ 180T
PA-46-310
U7A
JET SQUALUS
M18
M20
M26
M28
PZL104
PZL105
PZL110
Hawker 800
Hawker 1000
Hawker 4000
Premier
150
150
152
172
180
182
206
310
337
F406
DR200
DR250
DR400
DR500
R3000
100
100
112
114
200
500
520F
560
680
685
690
695
700
840
SAAB 2000
SAAB 340B
TL: Tubeless
Cheyenne II/IIXL
Cheyenne IIXL
Cheyenne I
Cheyenne IA
6-300
Cherokee Six
Saratoga II HP/TC/SP
Lance/Lance II & T
Seneca I/II/III/IV/V
Brave 285/300/375
Tomahawk
Twin Comanche
Cheyenne III/IIA
Cheyenne 400/ 1000
Seminole
Malibu/ Mirage 350P
Dromader
Mewa
Iskierka
Skytruck
Wilga
Flamingo
Koliber
Horizon
One
Dauphin
President
Darter
Laark
Twin Commander
Twin Commander
Twin Commander
Turbo Commander
Turbo Commander
Turbo Commander
Turbo Commander
Turbo Commander
Turbo Commander
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
160
210
210
210
190
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
160
160
LS
160
160
160
160
160
210
190
Ply
Tire Size
Rating
6.50-10
6.50-10
6.50-10
6.50-10
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
8.50-10
6.00-6
6.00-6
6.50-10
6.50-10
6.00-6
6.00-6
8.00-4
6.00-6
800 x 260
6.00-6
6.00-6
720 x 230
500 x 200
500 x 200
380 x 150
23 x 7.0-12
23 x 7.0-12
26 x 6.6 R14
H22 x 8.25-10
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.50-8
18 x 5.5
8.50-10
380 x 150-5
380 x 150-5
380 x 150-5
380 x 150-5
15 x 6.0-6
6.00-6
6.00-6
6.00-6
7.00-6
7.00-6
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
8.50-10
32 x 8.8
24 x 7.7
12
12
8
12
6
4
8
8
8
6
6
6
12
12
8
8
4
8
Manufacturer
Auxiliary Gear
TT/TL
Ply
TT/TL
Rating
TL
TL
TT
TL
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TT
TT
TT
TL
8
8
12
12
14
12
4
4
4
4
6
6
6
6
8
8
6
6
6
6
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
6
6
6
6
6
8
8
8
8
10
10
10
10
10
14
14
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
6.00-6
6.00-6
18 x 4.4
6.00-6
6.00-6
6.00-6
5.00-5
6.00-6
6.00-6
10 x 3.5-4
5.00-5
6.00-6
17.5 x 6.25-6
17.5 x 6.25-6
5.00-5
5.00-5
6
6
6
6
6
4
6
4
6
TT
TT
TT
TT
TT
TT
TT
TT
TT
6
6
10
10
6
6
TT
TT
TT
TT
TT
TT
4
TT
(mph)
SABRELINER
CH: Single Chine
8
8
6
6
6
6
4
4
4
6
6
6
6
6
6
6
6
6
8
8
DCH: DuaL Chine
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
Speed
design
Tailwheel
6
6
12
6
4
4
4
4
6
6
6
4
6
6
6
Popular Name
Rating
Tailskid
5.00-5
380 x 150
6.00-6
6.00-6
595 x 185-280
255 x 110
250 x 125
330 x 130
18 x 4.25-10
18 x 4.25-10
18 x 4.4
18 x 4.4
5.00-5
5.00-5
5.00-5
5.00-5
8.00
5.00-5
5.00-5
6.00-6
15 x 6.0-6
22 x 8.0-8
380 x 150-5
6x2
380 x 150-5
380 x 150-5
5.00-5
6.00-6
6.00-6
5.00-5
5.00-5
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
6.00-6
16 x 4.4
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
18 x 5.5
17.5 x 6.25-6
Model
Special
CH
CH
NA-40/ 60
NA-40/ 60
NA-60A/ 65
NA-75/ 75A
SHORTS
SC7
SD3-30
SD3-60
SLINGSBY AVIATION T.67
SOCATA
Rallye
Rallye
Rallye
Rallye
Rallye
Rallye
Rallye
Rallye
Rallye
Tangara
TB9
TB10
TB20
TB200
TB21
TBM700
UTVA
UTVA-75
YAKOVLEV
YAK12
YAK18
YAK50
YAK52
YAK55
Solid
TL: Tubeless
Sabreliner
Sabreliner
Sabreliner
Sabreliner
Skyvan
330
360
Firefly
100S
100ST
110/ 150ST
150SV/ SVS
180T/ TSRallye
235A/E
235C/CA
MS880
MS89 2-3-4
Cougar
Tampico
Tobago
Trinidad
Tobago XL
Trinidad TC
190
190
190
190
160
160
160
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
Main Gear
Tire Size
Ply
Auxiliary Gear
TT/TL
Tire Size
Rating
26 x 6.6
26 x 6.75-14
26 x 6.75-14
22 x 5.75-12
34 x 10.75-16
34 x 10.75-16
34 x 10.75-16
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
15 x 6.0-6
6.00-6
8.00-6
6.00-6
6.00-6
6.00-6
15 x 6.0-6
6.00-6
15 x 6.0-6
6.00-6
15 x 6.0-6
18 x 5.5
6.00-6
595 x 185(-11)
500 x 150(-9)
500 x 150(-9)
500 x 150(-9)
400 x 150(-4.5)
14
14
16
10
12
12
12
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
Ply
TT/TL
Rating
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TL
TT
TT
TT
TT
TT
18 x 4.4
18 x 4.4
18 x 4.4
18 x 4.4
9.00-6
9.00-6
9.00-6
5.00-5
5.00-4
5.00-4
5.00-4
5.00-4
5.00-4
5.00-4
5.00-4
5.00-4
5.00-4
15 x 6.0-6
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
255 x 110(-3.1)
400 x 150(-4.5)
200 x 80(-2.8)
400 x 150(-4.5)
200 x 80(-2.8)
CH: Single Chine
10
10
10
10
10
10
10
6
6
6
6
6
6
6
10
DCH: DuaL Chine
Special
design
TL
TL
TL
TL
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
CH
CH
CH
CH
61
COMMERCIAL AIRCRAFT
Manufacturer
Model
COMMERCIAL AIRCRAFT
Series
Complementary Speed
or popular
Information Rating
name
AEROSPATIALE
AEROSPATIALE/
ALENIA
AIRBUS INDUSTRIE
62
Caravelle
Caravelle
Caravelle
Concorde
ATR 42
ATR 42
ATR 42
ATR 42
ATR 42
ATR 72
ATR 72
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A300
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
A310
(mph)
46 T
48, 50, 52, 56 T
58 T
300
300
300/400/500
300/400/500
300/400/500
B2
B2
B2
B2
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
B4
600
600
600
600
600
600
600
600
600
600
600
600
200
200
200
200
200
200/300
200/300
200/300
200/300
200/300
200/300
200
200
200
300
300
300
300
300
300
Main Gear
Tire Size
Alt
Alt
Flotation
Alt
137 T
137 T
142 T
142 T
145 T
145 T
150 T
150 T
153 T
153 T
157.5 T
157.5 T
157.5 T
157.5 T
160.9 T
160.9 T
165 T
165 T
165 T
144 T
144 T
165.9 T
165.9 T
165.9 T
165.9 T
171.4 T
171.4 T
172.6 T
172.6 T
172.6 T
172.6 T
125.9 T
125.9 T
132.9 T
132.9 T
132.9 T
135.5 T
135.5 T
135.5 T
139.5 T
139.5 T
139.5 T
142.9 T
142.9 T
144.9 T
150.9 T
150.9 T
150.9 T
153.9 T
153.9 T
153.9 T
Tires are tubeless (TL) unless noted Codes: TT: Tube Type
180
210
210
279
190
190
190
190
190
190
190
210
210
210
210
235
235
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
Ply
Tire Size
Rating
35 x 9.0-17
14
35 x 9.0-17
16
35 x 9.0-17
18
47 x 15.75 R22.1 32
32 x 8.8 R16
10
32 x 8.8 R16
10
32 x 8.8 R16
12
32 x 8.8 R16
12
H34 x 10.0 R16
14
H34 x 10.0 R16
14
H34 x 10.0 R16
14
46 x 17.0 R20
32
46 x 16
24
46 x 17.0 R20
32
46 x 16
26
46 x 17.0 R20
32
46 x 16
28/30
46 x 17.0 R20
32
46 x 16
28/30
46 x 17.0 R20
32
46 x 16
28/30
46 x 17.0 R20
32
46 x 16
28/30
49 x 17
30
49 x 19.0-20
32
46 x 17.0 R20
32
46 x 16
28/30
46 x 17.0 R20
32
49 x 17
30/32
49 x 19.0-20
32
49 x 17
30/32
49 x 17
30/32
49 x 17
30/32
49 x 17
30/32
49 x 19.0-20
32
49 x 19.0-20
32
49 x 17
32/34
49 x 17
32/34
49 x 17
32/34
49 x 17
32/34
49 x 19.0-20
32/34
49 x 19.0-20
32/34
46 x 17.0 R20
32
46 x 16
26/28/30
46 x 17.0 R20
32
46 x 16
26/28/30
49 x 17
26/28/30
46 x 17.0 R20
32
46 x 16
28/30
49 x 17
28/30
46 x 17.0 R20
32
46 x 16
28/30
49 x 17
26/28/30
46 x 17.0 R20
32
46 x 16
28/30
46 x 16
28/30
46 x 17.0 R20
32
46 x 16
30
49 x 17
26/28/30
46 x 17.0 R20
32
46 x 16
30
49 x 17
30/32
TL: Tubeless
LS: Low Speed
Series
Complementary
Speed
Special
Manufacturer
or popular
Information
Rating
design
name
Auxiliary Gear
TT/TL
Ply
TT/TL
Rating
26 x 7.75-13
26 x 7.75-13
26 x 7.75-13
31 x 10.75-14
450 x 190-5
435 x 190 R5
450 x 190-5
435 x 190 R5
450 x 190-5
450 x 190-5
435 x 190 R5
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14.0 R16
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
40 x 14.0 R16
40 x 14
40 x 14
SH: Single Chine
10
10
10
20
10
10
10
10
10
10
10
22
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22/24/28
22/24/28
22
22/24/28
22
22/24/28
22/24/28
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22
22/24/28
22
22
22/24/28
22
22/24/28
22/24/28
22
22/24/28
22/24/28
22
22/24/28
22/24/28
22
22/24/28
22/24/28
22
22/24/28
22/24/28
22
22/24/28
22/24/28
CH
CH
CH
DCH: Dual Chine
AIRBUS INDUSTRIE
Model
A310
A310
A310
A310
A310
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A319
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A320
A321
A321
A321
A321
A321
A321
A321
A321
A321
A321
A321
A330
A330
A330
A330
300
300
300
300
300
- 200
- 200
- 300
- 300
Main Gear
Tire Size
Ply
(mph)
157.9 T
157.9 T
157.9 T
160.9 T
164.9 T
64.4 T
64.4 T
64.4 T
64.4 T
68.4 T
68.4 T
68.4 T
68.4 T
70.4 T
70.4 T
70.4 T
70.4 T
74.4/75.9 T
74.4/75.9 T
74.4/75.9 T
74.4/75.9 T
66.4 T
66.4 T
66.4 T
66.4 T
67.4/68.4/70.4 T
67.4/68.4/70.4 T
67.4/68.4/70.4 T
67.4/68.4/70.4 T
67.4/68.4/70.4 T
71.9/73.9 T
71.9/73.9 T
71.9/73.9 T
71.9/73.9 T
71.9/73.9 T
71.9/73.9 T
71.9/73.9 T
75.9 T
75.9 T
75.9 T
75.9 T
75.9 T
77.4 T
77.4 T
77.4 T
77.4 T
77.4 T
78.4 T
78.4 T
82.6 T
82.6 T
83.4 T
83.4 T
85.4 T
85.4 T
89.4 T
89.4 T
93.4 T
230.9/232.9 T
230.9/232.9 T
212.9 T
212.9 T
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
235
235
235
235
Auxiliary Gear
TT/TL
Tire Size
Rating
46 x 17.0 R20
46 x 16
49 x 17
49 x 17
49 x 17
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
1270 x 455 R22
46 x 17.0 R20
915 x 300 R16
46 x 16
49 x 17
49 x 19.0-20
36 x 11
1270 x 455 R22
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
1270 x 455 R22
46 x 17.0 R20
46 x 16
49 x 17
49 x 19.0-20
1270 x 455 R22
1270 x 455 R22
49 x 18.0-22
1270 x 455 R22
49 x 18.0-22
1270 x 455 R22
49 x 18.0-22
1270 x 455 R22
49 x 18.0-22
1270 x 455 R22
49 x 18.0-22
1270 x 455 R22
1400 x 530 R23
54 x 21.0-23
1400 x 530 R23
54 x 21.0-23
* Actual Number of Plies
32
30
30/32
30/32
30/32
32
28/30
28/30
32
32
28/30
28/30
32
32
28/30
28/30
32
32
28/30
28/30
32
32
30
28/30
32
32
30
28/30
32
30
32
20
30
28/30
32
22
30
32
30
28/30
32
30
32
30
28/30
32
30
30
30
30
30
30
30
30
30
30
30
32
32
32
32
32
LS: Low Speed
Ply
TT/TL
Rating
40 x 14.0 R16
40 x 14
40 x 14
40 x 14
40 x 14
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8 R15
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8 R15
30 x 8.8
30 x 8.8
30 x 8.8
30 x 8.8 R15
30 x 8.8 R15
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8 R15
30 x 8.8
30 x 8.8 R15
1050 x 395 R16
22
22/24/28
22/24/28
22/24/28
22/24/28
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
28
1050 x 395 R16
28
CH: Single Chine
Special
design
DCH: Dual Chine
63
COMMERCIAL AIRCRAFT
Manufacturer
Model
COMMERCIAL AIRCRAFT
Series
Complementary
Speed
or popular Information
Rating
name
ANTONOV
64
BOEING
A330
A330
A330
A330
A340
A340
A340
A340
A340
A340
A340
A340
A340
A340
AN2
AN8
AN12
AN14
AN22
AN24
AN26
AN28
AN32
AN74
AN124
AN225
707
707
707
717
720
720
727
727
727
727
727
727
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
737
747
747
747
747
747
747
- 300
- 300
- 300
- 300
- 200
- 200
- 200
- 200
- 300
- 300
- 300
- 300
- 300
- 300
Ply
(mph)
215.9/217.9/218.9 T
215.9/217.9/218.9 T
230.9/233.9 T
230.9/233.9 T
254.4/257.9 T
254.4/257.9 T
260.9/275.9 T
260.9/275.9 T
254.4/257.9 T
254.4/257.9 T
260.9/262.9 T
260.9/262.9 T
271.9/275.9 T
271.9/275.9 T
120
320B
320C
200/300
B
100
100/QC
100/QC
200/C
200/C
200/C
100
200
200
200
200
200
200
300
300
400
400
500
300/400/500
600
600 Alt
700
700 IGW
800
900
700/800/900
SP
SP
SP
SR
100
100
Main Gear
Tire Size
Flotation
High Gross Wt
Alt
New Generation
New Generation
New Generation
New Generation
New Generation
New Generation
Alt
613 klb
663 klb-673 klb
696 klb-705 klb
523 klb-613 klb
713 klb
738 klb
235
235
235
235
235
235
235
235
235
235
235
235
235
235
210
210
210/225
225
210
210
210
210
210
210
225
210
210
210/225
210
210
210
210/225
210/225
225
225
225
225
225
225
225
225
225
225
225
225
225
210/225
210/225
210/225
210/225
210/225
210/225
Tire Size
Rating
1400 x 530 R23
36
54 x 21.0-23
36
1400 x 530 R23
36
54 x 21.0-23
36
1400 x 530 R23
32
54 x 21.0-23
32
1400 x 530 R23
36
54 x 21.0-23
36
1400 x 530 R23
32
54 x 21.0-23
32
1400 x 530 R23
36
54 x 21.0-23
36
1400 x 530 R23
36
54 x 21.0-23
36
800 x 260 (-13)
6*
950 x 350
6*
1050 x 300 (-20) 10*
700 x 250 (-14)
6*
1750 x 730 (-24) 16*
900 x 300 (-14.5)
8*
1050 x 400 (-14.5)
8*
720 x 320 (-9.7) 10*
1050 x 390 (-16) 8*
1050 x 390 (-16) 10*
1270 x 510 (-22) 16*
1270 x 510 (-22) 20*
46 x 16
24
46 x 16
26/28
46 x 16
28/30
H41 x 15.0-19
24
40 x 14
24
40 x 14
24
49 x 17
26/28
49 x 17
26/28
50 x 20.0-20
26/30
49 x 17
28/30
49 x 17
28/30/32
50 x 21.0-20
28/30
40 x 14
24
40 x 14
24
C40 x 18.0-17
24
C40 x 14.0-21
24
42 x 15
24
40 x 14
28
H40 x 14.5-19
24
H40 x 14.5-19
24
H42 x 16.0-19
24/26
H40 x 14.5-19
26
H42 x 16.0-19
26
H40 x 14.5-19
24
H43.5 x 16.0-21
H44.5 x 16.5-21
H43.5 x 16.0-21
H44.5 x 16.5-21
H44.5 x 16.5-21
H44.5 x 16.5-21
46 x 16
46 x 16
46 x 16
49 x 17
46 x 16
46 x 16
Manufacturer
Auxiliary Gear
TT/TL
Ply
TT/TL
Rating
TT
TT
TT
TT
TT
TT
TT
TT
26
28
26
28
28
28
28/30
28/30
28/30
28/30
28/30
30/32
LS: Low Speed
28
1050 x 395 R16
28
1050 x 395 R16
28
1050 x 395 R16
28
1050 x 395 R16
28
1050 x 395 R16
28
1050 x 395 R16
28
470 x 210 (-5)
900 x 300
900 x 300
700 x 250 (-14)
1450 x 580 (-20)
700 x 250 (-14)
700 x 250 (-14)
595 x 185 (-11)
700 x 250 (-14)
720 x 310
1120 x 450 (-19)
1120 x 450 (-19)
39 x 13
39 x 13
39 x 13
26 x 6.6
34 x 9.9
39 x 13
32 x 11.5-15
32 x 11.5-15
32 x 11.5-15
32 x 11.5-15
32 x 11.5-15
32 x 11.5-15
24 x 7.7
24 x 7.7
C24.5 x 8.5-12
24 x 7.7
24 x 7.7
24 x 7.7
24 x 7.7
27 x 7.75-15
27 x 7.75-15
27 x 7.75-15
27 x 7.75-15
27 x 7.75-15
27 x 7.75 R15
27 x 7.75-15
27 x 7.75 R15
27 x 7.75 R15
27 x 7.75 R15
27 x 7.75 R15
27 x 7.75 R15
27 x 7.75 R15
49 x 17
49 x 17
49 x 17
49 x 17
46 x 16
46 x 16
6*
8*
8*
6*
12*
6*
6*
4*
6*
10*
14*
18*
14
16
16
12
12
14
12
12
12
12
12
12
14/16
16
14
16
16
16
16
10
10
12
12
12
12
12
12
12
12
12
12
12
28/30
30
30/32
28/30
28/30
30/32
CH: Single Chine
design
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
747
747
747
747
747
747
747
747
747
747
747
747
747
757
757
767
767
767
767
767
767
777
777
777
777
CH
CH
CH
CH
CH
CH
DCH: Dual Chine
Series
Complementary
Speed
Rating
name
BOEING
1050 x 395 R16
Model
Special
BRITISH AEROSPACE
ATP
SYSTEMS
BAC-111
BAC-111
BAC-111
BAC-111
BAe-146
BAe-146
Trident
Trident
Vanguard
VC-10
VC-10
Viscount
CASA
C-212
CN-235
CONVAIR
CV240
CV340
CV440
CV540
CV580/600
CV580/600
CV880
CV880
CV990
FAIRCHILD DORNIER DO 328
DO 328
DO 328
DO 328
FAIRCHILD AIRCRAFT SA227-DC
FAIRCHILD HILLER
F.27/FH227
F.27/FH227
FOKKER
F-27
F-27
F-28
F-28
100
200
200
200
200
200
200
200
300
400
400
400
400
200
300
200
200
200
300
300
400
200
200, 200
300
200
300
Ply
(mph)
LR
ER
RJ70 / RJ85 / RJ100
RJ70 / RJ85 / RJ100
1C
1E, 2E, 3B
Super
Aviocar
Alt
M
Turbo Prop
Turbo Prop
Jet
Jet
Alt
Friendship
Friendship Alt
Friendship
Friendship Alt
Auxiliary Gear
TT/TL
Tire Size
Rating
753 klb
210/225 46 x 16
778 klb
225/235 49 x 17
788 klb
225/235 49 x 17
803 klb-808 klb
225
49 x 17
823 klb
225/235 49 x 17
823 klb
225/235/245 49 x 19.0-20
836 klb
235/245 49 x 19.0-20
836 klb
235/245 49 x 19.0-20
836 klb
235
49 x 19.0-20
235
H49 x 19.0-22
Combi
235
H49 x 19.0-22
Freighter
235
H49 x 19.0-22
ER 910 klb
235
50 x 20.0 R22
210/225 H40 x 14.5-19
235
H40 x 14.5-19
225
H45 x 17.0-20
225
H46 x 18.0-20
ER
225
H46 x 18.0-20
225
H46 x 18.0-20
ER
225c
H46 x 18.0-20
ER
235
50 x 20.0 R22
235
50 x 20.0 R22
ER
235
50 x 20.0 R22
200
300/400
475
500,510
100
100
300/310
300/310
Metro 23
Main Gear
Tire Size
Ply
TT/TL
Rating
30/32
30/32
30/32
30/32
30/32
32
32
34
32
32
32
32
34
24/26
26
26
26/28
32
28
32
32
26
46 x 16
49 x 17
49 x 17
49 x 17
49 x 17
49 x 19.0-20
49 x 19.0-20
49 x 19.0-20
49 x 19.0-20
H49 x 19.0-22
H49 x 19.0-22
H49 x 19.0-22
50 x 20.0 R22
H31 x 13.0-12
H31 x 13.0-12
H37 x 14.0-15
H37 x 14.0-15
H37 x 14.0-15
H37 x 14.0-15
H37 x 14.0-15
H37 x 14.0-15
42 x 17.0 R18
30/32
30/32
30/32
30/32
30/32
32
32
34
32
32
32
32
34
20
20
22/24
22/24
24
24
24
24
26
32
42 x 17.0 R18
26
235
235
52 x 20.5-23
52 x 20.5-23
36
36
43 x 17.5 R17
43 x 17.5 R17
32
32
190
H34 x 12.0-14
14
22 x 6.75-10
8
210
210
210
210
190
190
210
210
LS
210
225
LS
160
160
LS
LS
LS
LS
LS
LS
210
210
210
190
190
210
210
160
LS
40 x 12
40 x 12
44 x 16
40 x 12
39 x 13
42 x 15
34 x 9.5-18
36 x 10.0-18
17.00-20
50 x 18
50 x 18
36 x 10.75-16.5
11.00-12
28 x 9.0-12
34 x 9.9
12.50-16
12.50-16
12.50-16
12.50-16
39 x 13
39 x 13
39 x 13
41 x 15.0-18
24 x 7.7
25.5 x 8.75-10
25.75 x 6.75-14
26 x 6.6 R14
19.5 x 6.75-8
9.50-16
39 x 13
34 x 10.75-16
37 x 11.75-16
39 x 13
40 x 14
16
18
18
20
18/22
16/18
14
16
22
24
26
16
10
12
12
12
12
12
14
14
20
22
22/24
14
14
14
14
10
12
14
10
10
14/16
16
24 x 7.25-12
24 x 7.25-12
24 x 7.7
24 x 7.25-12
24 x 7.7
8.50-10
29 x 8.0-15
29 x 8.0-15
33 x 9.75-16
39 x 13
39 x 13
24 x 7.25-12
24 x 7.7
24 x 7.7
26 x 6.0
7.50-14
7.50-14
7.50-14
7.50-14
7.50-14
29 x 7.7
29 x 7.7
29 x 7.7
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
19.5 x 6.75-8
18 x 4.4
8.50-10
24 x 7.7
28 x 9.0-12
24 x 7.25-12
24 x 7.7
24.5 x 8.5-10
10
10
12
10
14
12
12
12
10
16
16
10
8
12/14
10
8
8
8
8
8
12
12
16
10
10
10
10
10
10
10
8
10
10
10
190
190
210
210
TT
TT/TL
TT/TL
TT/TL
TT/TL
LS: Low Speed
CH: Single Chine
Special
design
65
CH
CH
CH
CH
TT
TT/TL
TT/TL
TT/TL
TT/TL
TT/TL
CH
CH
CH
DCH: Dual Chine
COMMERCIAL AIRCRAFT
Manufacturer
Model
MILITARY AIRCRAFT
Series
Complementary
Speed
Rating
name
FOKKER
66
F-28
F50
F70
F100
ILYUSHIN
IL14
IL14M
IL18 & 18D
IL62 & 62M
IL76
IL78
IL86
IL96-300
IL96 M/T
IL114
IPTN1
N-250
LOCKHEED
Constellation
L-100, L382
L-1011
L-1011
L-1011-1
L-188
L-188
MC DONNELL DOUGLAS DC-3
(BOEING)
DC-4
DC-6B&7
DC-7C
DC-8
DC-8
DC-8
DC-8
DC-8
DC-8
DC-8
DC-9
(mph)
Friendship Mk2000,5000,6000
210
190
225
225
235
Tristar
Tristar
Tristar
HV/50F
61
62
62H
63
63
10
(11-12-14-15)
30 (31)
30 (32)
30 (33-41)
Flotation
50
10
30, 40
DC-9
DC-9
DC-9
DC-9
DC-9
DC-10
DC-10
MD-11
MD-80, 81, 82
MD-83
MD-87
MD-88
MD-90
NAMC2 (NIHON)
YS-11
YS-11E
TUPOLEV
TU 134
TU 154
TU 154M
TU 154M
TU 204
TU 204
TU 214/214C
TU 214/214C
TU 334
TU 334
YAKOVLEV
YAK 4O
YAK 42
1.IPTN: Industri Pesawat Terbang Nusantara
TL: Tubeless
Main Gear
Tire Size
190
LS
210
225
225
225
LS
210
LS
LS
LS
LS
210
225
225
225
225
225
225
Ply
Tire Size
Rating
Ply
20
40 x 14
22
40 x 14
24
40 x 14
22/24
42 x 15
22
41 x 15.0-18
22/24
50 x 20.0-20
32/34/36
52 x 20.5-23
26/28/30
H54 x 21.0-24
36
H44.5 x 16.5-20 24/26
H44.5 x 16.5-20 28
H44.5 x 16.5-20 28
H44.5 x 16.5-20 28
H44.5 x 16.5-21 26/28
39 x 13
14
39 x 13
14
930 x 305 (-16) 10*
930 x 305 (-16) 10*
930 x 305 (-16) 10*
950 x 300 (-16) 12*
1070 x 390 R480
225
H40 x 14.5 R19
24
1070 x 390 R480
225
H40 x 14.5 R19
24
1070 x 390 R480
225
H40 x 14.5 R19
24
1120 x 450 (-19) 10*
930 x 305 (-16) 10*
2.NAMC: Nihon Aeroplane Manufacturing Company
*Actual Number of Plies
LS: Low Speed
TT/TL
Rating
40 x 14
14/16
24.5 x 8.5-10
10
34 x 10.75-16
12
24 x 7.7
6
H40 x 14.0-l9
18
24 x 7.7
10
H40 x 14.0-19
20
24 x 7.7
10
840 x 300 (-16)
8*
TT
770 x 330 (-10)
8*
865 x 270 (-17)
8*
TT
770 x 330 (-10)
8*
930 x 305 (-16) 10*
TT
700 x 250 (-14)
6*
1450 x 450 (-24.8) 18*
TT
930 x 305 (-16)
10
1300 x 480 (-20) 12*
TT
1100 x 330 (-20) 10*
1300 x 480 (-20) 12*
TT
1100 x 330 (-20) 10*
1300 x 480 (-20) 18*
1300 x 480 (-20) 18*
1300 x 480 (-22) 18*
1300 x 480 (-22) 18*
H49 x 19.0-22
32
H49 x 19.0-22
32
880 x 315 (-14.2) 6*
620 x 180 (-12)
4*
37 x 11.75-16
12
7.00-8
16
17.00-20
24
TT/TL 34 x 9.9
10
56 x 20.0-20
24
39 x 13
14
50 x 20.0-20
34/36
36 x 11
22
52 x 20.5-20
34/36
37 x 13.0-16
26
50 x 20.0-20
32
36 x 11
20
13.50-16
24
7.50-14
10
40 x 14
24
28 x 7.7
10/14
17.00-16
10
TT/TL 9.00-6
10
15.50-20
14/16
TT
44”
12
15.50-20
20
TT
44”
14
17.00-20
20/22/24
15.00-6
14
44 x 16
26
34 x 11
18
44 x 16
28
34 x 11
20/22
44 x 16
30
34 x 11
22
44 x 16
30/32
34 x 11
22
44.5 x 16.5
30
34 x 11
22
44 x 16
32
34 x 11
22
44.5 x 16.5
30
34 x 11
22
210/225 40 x 14
Manufacturer
Auxiliary Gear
TT/TL
26 x 6.6
210/225
225
225
210
225
225
235
235
225
225
225
225
225
LS
LS
TT
TT
TT
TT
TT
8
Model
Popular Name
Speed
Special
Rating
design
(mph)
CH
CH
CH
TT
TT
TT
TT
TT
TT
TT
CH
26 x 6.6
8/10
CH
26 x 6.6
10
CH
26 x 6.6
10
CH
26 x 6.6
10
CH
26 x 6.6
10
CH
37 x 14.0-14
24
40 x 15.5-16
26/28
40 x 15.5-16
28
26 x 6.6
12
26 x 6.6
12
26 x 6.6
12
26 x 6.6
12
26 x 6.6
12
24 x 7.7
10
24 x 7.7
10
660 x 200 (-12)
8*
TT
800 x 225 (-16)
8*
TT
800 x 225 (-16)
8*
TT
800 x 225 (-16)
8*
TT
840 x 290-361
10*
840 x 290-361
10*
840 x 290-361
10*
840 x 290-361
10*
680 x 260-335
680 x 260-335
720 x 310 (-9.7) 10*
TT
930 x 305 (-16) 10*
TT
Tires are tubeless (TL) unless noted
CH: Single Chine
DCH: Dual Chine
AERITALIA
F-104
G-91Y
AERMACCHI
MB.326
MB.339
AERO INDUSTRY
AT-3
DEVELOPMENT
Ching-Kuo
CENTER
F-5E
AEROSPATIALE
Nord
Epsilon
AEROSPATIALE/DASA C.160
AERO VODOCHODY L39/ L139
L59/ L159
AGUSTA
SF.260
ALENIA
G.222/C-27
ALENIA/LOCKHEED F-104S
ALENIA/AERMACCHI/
AMX
EMBRAER
ANTONOV
AN12
AN124
AN14
AN2
AN32
AN70
AN72
AN74
AN8
BEECH
T-34B
T-34C
T-42A
U-8F
VC6A
BELL HELICOPTER
XV-15
TEXTRON
BERIEV
A50
BE42
BOEING
B-47E
B-52F, G, H
C-135
KC-135
C97D
E-3A
E-4A
T-43
VC-137C
YC14
BREGUET
1050
BAE SYSTEMS
145
167
AV-8A/GR3
AV-8A/GR3
Bulldog
Dominie
FRS.Mk
FRS.Mk
Hawk 60
Hawk 100
Hawk 200
Hunter
Hunter
Nimrod
Sea Fury
TL: Tubeless
Paris
Transall
Albatros
Alca
Starfighter
Mentor
Mentor
Cochise
Seminole
King Air
275
210
160
160
215
215
265
150
LS
160
Main Gear
Tire Size
STOL
Jet Provost
Strikemaster
Harrier I
Harrier I
Sea Harrier
Sea Harrier
Auxiliary Gear
TT/TL
18
14
12
12
18
18
18
12
6
10
TL
TL
TL
TL
TL
TL
TL
TL
LS
190
275
6
14/16
18
200
670 x 210-12
1050 x 300 (-20)
1270 x 510 (-22)
700 x 250 (-14)
800 x 260 (-13)
1050 x 390 (-16)
1120 x 450 (-19)
1050 x 390 (-16)
1050 x 390 (-16)
950 x 350 (-17.7)
6.50-8
19.5 x 6.75-8
6.50-8
8.50-10
8.50-10
TT
10
14
TL
TL
18
TL
18 x 5.5
12
TL
10*
16*
6*
6*
8*
14*
10*
10*
8*
6
10
6
8
8
TT
900 x 300 (-14.5)
1120 x 450 (-19)
700 x 250 (-14)
470 x 210 (-5)
700 x 250 (-14)
1120 x 450 (-19)
720 x 310 (-9.7)
720 x 310 (-9.7)
900 x 300-14.5)
5.00-5
5.00-5
5.00-5
6.50-10
6.50-10
8*
14*
6*
6*
6*
14*
10*
10*
6*
4
6
6
6
6
TT
8
TT
TT
TL
TT
TT
TT
TT
TL
TL
TT
TL
TL
5.00-4
TT
1100 x 330 (-20)
840 x 290
26 x 6.6
14
32 x 8.8
16
38 x 11
14
38 x 11
14
36”
12
39 x 16
16
49 x 17
30
24 x 7.7
14
39 x 13
16
B40 x 18.0-16
20
6.50-10
12
6.00-4
12
6.00-4
12
26 x 8.75-11
16
13.5 x 6.0-4
14
5.00-5
4
18 x 4.25-10
6
26 x 8.75-11
12/16
13.5 x 6.0-4
12/14
16 x 4.4
8
16 x 4.4
8
18 x 5.5
8
19 x 6.25-9
10
19 x 6.25-9
10
30 x 9.0-15
10
13.5 x 4.25-6
8
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TT
TL
TL
TL
6.00-6
23 x 7.0-12
26 x 7.75-13
4
10
8
TT
TL
TL
6.50-10
6.50-10
225 H22 x 6.5-11
215 29 x 6.25-16
200 29 x 6.25-16
174kt 36 x 10.0-18
LS 30 x 9.0-15
14
14
16
14
14
20
10
TL
TL
TL
TT
TL
TL
TL
14
10
6
6
12
12
12
8
6
10
CH: Single Chine
6
Special
design
TT
TL
TL
TL
38
38
26
26
32
28
30
24
28
20
12
10
10
8
230
230
LS
210
230
230
LS
TT/TL
18 x 5.5
9.00-10
380 x 150-4
380 x 150-4
18 x 6.5-8
18 x 6.5-8
18 x 6.5-8
9.00-6
5.00-4
12.50-16
450 x 165
460 x 180
5.00-5 6
29 x 11.0-10
18 x 5.5
1300 x 480 (-20)
1030 x 350
56 x 16
56 x 16
49 x 17
49 x 17
56 x 16
46 x 16
49 x 17
40 x 14
46 x 16
B40 x 18.0-16
6.50-10
21 x 6.75-9
21 x 6.75-9
26 x 7.75-13
250
250
225
225
250
225
225
210
225
190
160
Ply
Rating
26 x 8.0-14
27.5 x 10.5-12
545 x 175-10
545 x 175-10
24 x 8.0-13
24 x 8.0-13
24 x 8.0-13
12.50-16
15 x 6.0-6
15.00-16
610 x 215
610 x 215
6.00-6
39 x 13
26 x 8.0-14
LS
LS
LS
LS
LS
Tire Size
Rating
6.50-8
Albatros
Stratojet
Stratofortress
Stratolifter
Stratotanker
Stratofreighter
AWACS
747
737
Ply
TL
TL
TL
TL
TL
TL
TL
TT
TL
TT
TT
TT
TT
TT
TT
TT
TL
TL
TT
TT/TL
67
TT
TT
TT
TT
TL
TL
TT
TL
TL
TL
TL
TL
TT
TT
TT
TL
TL
TT
TL
TL
TL
TL
TL
TL
TT
TL
TL
TT
CH
Outrigger
CH
Outrigger
DCH: Dual Chine
MILITARY AIRCRAFT
Manufacturer
MILITARY AIRCRAFT
Model
Popular Name
Speed
Rating
Main Gear
Tire Size
(mph)
68
BAE SYSTEMS
AV-8B/GR5
MC DONNELL DOUGLAS AV-8B/GR5
CASA
C-101
C-212
CN-235
CN-235 (Flotation)
CESSNA
206
A-37A, B
O-1 E
O-2A, B
T-37B
T-41A
T47A
U-17A
U-3B
DASSAULT AVIATION Alphajet
Alphajet
Alphajet Export
Alphajet Export
Atlantic
Jaguar
Jaguar
Mirage F1
Mirage F1
Mirage III, V, 50
Mirage III, V, 50
Mirage IV
Mirage 2000
Mirage 2000
Rafale A
Rafale B, C
Rafale B, C Alt
Rafale M
Super Etendard
Super Etendard
DEHAVILLAND Canada
C-7A
(Bombardier)
C-8A
U-1A
U-6A
E-9A, CC-142, CT-142
DORNIER
DO 28
EMBRAER
EMB-121
EMB-312
EMB-326
EMB 145 RS / MP
U-19
EUROFIGHTER
EFA
EFA - TYPHOON
FABRICA MILITAR
IA 63
DE AV10NES
FAIRCHILD AIRCRAFT A-10A
C-26A/B
C-119J
C-123B
C-123J
F105
F84F
FLUG &
AS.202
FAHRZEUGWERKE AG
TL: Tubeless
Harrier II
Harrier II
Aviojet
Aviocar
Bird Dog
Skyhawk
Citation II
Skywagon
Up to 7T
Up to 7T
8T
8T
Breguet 1150
Jaguar
Jaguar
230
230
160
160
160
LS
LS
LS
LS
160
LS
190
LS
LS
162
162
206
206
160
244
244
233
233
262
262
268
246
262
224
242
242
226
189
189
Caribou
LS
Buffalo
Otter
Beaver
LS
LS
LS
160
LS
160
160
160
210
160
235
253
Xingu
Tucano
Xavante
Ipanema
Prototype
Production
Pampa
Thunder Bolt II
Flying Boxcar
Provider
Provider
Thunder Chief
Thunder Streak
Bravo
200
160
160
160
160
250
225
LS
TT/TL
Tire Size
Rating
26 x 7.75-13
24 x 7.7
11.00-12
28 x 9.0-12
11.00-12
6.00-6
7.00-8
8.00-6
6.00-6
20 x 4.4
6.00-6
22 x 8.0-10
6.00-6
6.50-10
615 x 225 R10
615 x 225-10
615 x 225 R10
615 x 225 R10
39 x 13
615 x 225-10
615 x 225 R10
600 x 155 R13
605 x 155-13
750 x 230 R15
750 x 230-15
640 x 170-14
750 x 230 R15
750 x 230-15
810 x 275 R15
790 x 275 R15
790 x 275-15
790 x 275 R15
30 x 7.7 R16
30 x 7.7-16
10
12
10
12
10
6
16
6
8
12
4
12
6
6
12
22
12
12
10
14
14
14
20
Ply
TT/TL
Rating
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
26 x 8.75-11
13.5 x 6.0-4
18 x 5.5
24 x 7.7
24 x 7.7
8.50-10
6.00-6
6.00-6
8 x 3.0-4
15 x 6.0-6
16 x 4.4
5.00-5
18 x 4.4
10.00”
6.00-6
365 x 150 R4
380 x 150-4
365 x 150 R4
380 x 150-4
26 x 8.0-13
550 x 250-6
535 x 250 R6
360 x 135 R6
360 x 135-6
435 x 190 R5
450 x 190-5
18 x 5.5
360 x 135 R6
360 x 135-6
550 x 200 R10
360 x 135 R6
360 x 135-6
520 x 140 R10.5
490 x 155 R9
490 x 155-9
16
14
8
8
14
12
6
6
4
4
6
4
10
8
6
8
8
12
10
12
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TL
TL
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
11.00-12
8
TL
7.50-10
6
TL
15.00-12
11.00-12
8.50-10
31 x 9.75-13
8.50-10
670 x 210-12
6.50-10
21.5 x 7.0-10
30 x 9.50-14
8.50-10
28 x 9.5 R15
30.5 x 10.5 R17
10
6
6
12
8
10
8
12
16
8
TL
TT
TT
TL
TT
TT
TT
TL
TL
6
6
8
6
6
6
6
6
8
TL
TL
8.90-12.50
6.00-6
5.50-4
22 x 6.5-10
5.00-4
16 x 4.4
5.00-5
5.00-4.5
19.5 x 6.75-8
10”
18 x 7.75 R6
20 x 8.5 R6.5
TL
TT
TT
TL
TT
TT
TT
TL
TL
TT
TL
TL
6.50-10
10
TL
380 x 150-4
6
TL
36 x 11
19.5 x 6.75-8
15.50-20
17.00-20
17.00-20
36 x 11
30 x 6.6
22
10
14
22
22
24
14
TL
14
10
10
8
10
14
12
TL
TL
TT
TT
TT
TL
TT/TL
6.00-6
6
6
TT
Manufacturer
Auxiliary Gear
Ply
24 x 7.7
18 x 4.4
TT 9.50-16
TT/TL 11.00-12
TT/TL 9.50-16
TL
24 x 7.7
TT 20 x 4.4
TT
5.00-5
CH: Single Chine
Model
Speed
Rating
design
(mph)
FUJI
Outrigger
DCH: Dual Chine
Popular Name
Special
DCH
CH
CH
LM-1
T-3
T-34
GAF1
Nomad
GENERAL DYNAMICS B-58A
RB-57F
C131A
C131B, C, D, E, F
C-131H
F-111A
F-16A, B
F-16A, B
F-16A, B, C, D
F-16C, D
F-16 Block 40/50/60
F-16 Block 40/50/60
F-102A
F-106A
F-111A
FB-111A
FB-111B
T-29D
GRUMMAN
A-6E
C-1A
C-2A
E-1B
E-2C
E-16B
EA-6B
F-11A
F-14A
F-14B (A+)
HU-16E
OV-1C, D, E
S-2
HAWKER SIDDELEY Andover
Andover
Buccaneer
H S-748
Hunter
Nimrod
Sea Fury
HELIO
U-10A
IAI2
ARAVA
KFIR/Cheetah/Pantera
ILYUSHIN
IL38
IL78
KAWASAKI
P-3C
T-4
LMAASA (FMA)
IA58
LOCKHEED MARTIN AH56A
C-5A, B
C-130
C-130A, B, D, E
C-130H,K,N,P
C-130J
C-140A, B
C-141A, B
F-22
F-104A,B
1. GAF: Government Aircraft Factories
Nikko
Nomad
Hustler
Canberra
Samaritan
Samaritan
Fighting Falcon
Fighting Falcon
Fighting Falcon
Fighting Falcon
Fighting Falcon
Fighting Falcon
Delta Dagger
Delta Dart
Intruder
Trader
Greyhound
Tracer
Hawkeye
Intruder
Prowler
Tiger
Tomcat
Tomcat
Albatross
Mohawk
Tracker
Courier
LS
LS
LS
LS
268
200
160
160
160
225
230
230
250
250
259
259
250
250
250
250
250
160
160
160
160
160
160
160
160
200
219
219
160
LS
160
160
160
208
LS
215
174 kt
LS
LS
160
257
200
Pampa
Cheyenne
Galaxy
Hercules
Hercules
Hercules
Hercules
Jetstar
Starlifter
Raptor
Starfighter
120
160
200
210
200
200
200
200
200
248
275
2. IAI: Israel Aircraft Industries
CH: Single Chine
Main Gear
Tire Size
Auxiliary Gear
Ply
TT/TL
Tire Size
Rating
6.50-8
6.50-8
6.50-8
8.00-6
22 x 7.7-12
44 x 13
34 x 9.9
12.50-16
39 x 13
47 x 18-18
25.5 x 8.0-14
25.5 x 8.0-14
25.5 x 8.0 R14
25.5 x 8.0-14
27.75 x 8.75-14.5
27.75 x 8.75 R14.5
30 x 8.8
30 x 8.8
47 x 18.0-18
47 x 18.0-18
47 x 18.0-18
34 x 9.9
36 x 11
34 x 9.9
36 x 11
34 x 9.9
36 x 11
36 x 11
36 x 11
26 x 6.6
37 x 11.5-16
37 x 11.5-16
40 x 12
8.50-10
34 x 9.9
34 x 11.75-14
32 x 10.75-14
35 x 10.0-17
32 x 10.75-14
29 x 6.25-16
36 x 10.0-18
30 x 9.0-15
6.50-8
11.00-12
750 x 230-15
930 x 305 (-16)
1300 x 480 (-20)
40 x 14
22 x 5.5
6.50-10
29 x 11.0-10
49 x 17
56 x 20.0-20
20.00-20
20.00-20
20.00-20
26 x 6.6
44 x 16
37 x 11.5 R18
25 x 6.75
6
6
6
8
16
26
14
12
16
30
18
20
20
20
24
24
22
22
30
36
36
14
24
14
24
14
24
24
24
16
28
28
14
12
14
12
12
26
12
14
20
10
6
10
22
10*
12*
28
10
10
26
24
22
26
26
14
28
28
18
DCH: Dual Chine
Ply
TT/TL
Rating
TT
TT
TT
TT
TL
TT
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TL
TL
TL
TL
TL
TT
TL
TT
TL
TL
TL
TL
TL
TL
TT
TL
TT
TL
TL
TL
TL
TT
TL
TL
TT
TL
TL
TT
TT
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
5.00-5
5.00-5
5.00-5
8.00-6
22 x 7.7-12
24 x 5.5
26 x 6.6
7.50-14
7.50-14
22 x 6.6-10
18 x 5.5
18 x 5.7-8
18 x 5.7-8
18 x 5.7-8
18 x 5.7-8
18 x 5 7-8
24 x 5.5
18 x 4.4
21 x 7.25-10
21 x 7.25-10
21 x 7.25-10
26 x 6.6
20 x 5.5
18 x 5.5
20 x 5.5
18 x 5.5
20 x 5.5
20 x 5.5
20 x 5.5
18 x 5.5
22 x 6.6-10
22 x 6.6-10
26 x 6
6.50-8
18 x 5.5
8.50-10
8.50-10
24 x 6.6-12
8.50-10
19 x 6.25-9
30 x 9.0-15
13.5 x 4.25-6
10.00”
9.00-6
450 x 230-5
800 x 225 (-16)
1100 x 330 (-20)
28 x 7.7
18 x 4.4
380 x 150-4
5.00-4
49 x 17
39 x 13
12.50-16
12.50-16
12.50-16
18 x 4.4
36 x 11
23.5 x 7.5 R10
18 x 5.5
TL: Tubeless
6
4
6
8
16
12
14
8
8
16
14
18
18
18
18
18
12
12
20
20
20
14
12/14
12
12/14
12
12/14
16
12
8
20
20
10
8
12
8
8
20
8
10
10
8
8
10
22
8*
10*
14
10
6
8
26
14
12
12
12
10
22
22
14
Special
design
TT
TT
TT
TT
TL
TT
TL
TT
TT/TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TL
TL
TL
TT
TL
TT
TL
TT
TL
TL
TL
TL
TL
TL
TT
TT
TT
TT
TT
TL
TT
TT
TL
TT
TT
69
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
CH
MILITARY AIRCRAFT
Manufacturer
MILITARY AIRCRAFT
Model
Popular Name
Speed
Rating
Main Gear
Tire Size
(mph)
70
LOCKHEED MARTIN F-104C,D,J,DJ
F-104G
F-117A
L-1011-Tanker
P-2H
P-3A
P-3B, C, F, K
S-3A, 3B
SR-71A, B
T-33
LTV
A-7A, B, E
A-7D, H, P
F-8
XC142A
MBB/RFB1
M400
M600
MC DONNELL DOUGLAS A-1
A-3
A-4B, C
A-4M
B-26
B-66
C-9A
C-17
C-47
C-54
C-124
DC-3
F-4B
F-4C, D, E, G
F-4J
F-6A
F-101A, C
F-101B, F
F-15A, B, C, D
F-15E
F-15E
F-18 C,D,E,F
KC-10
P5B
T-45A
C/VC-118
MIKOYAN
MIG 21
MIG 23, 23M
MIG 25
MIG 27
MIG 29
MIG 29 SM/K
MIG 31
MITSUBISHI
F-4EJ
F-15J
FS-X
H-60J
MUDRY
CAP 10
CAP 20
NORTHROP
B2B
F-5A, B
F-5E
T-38A/B
T6A
Starfighter
Starfighter
Nighthawk
Tristar-Tanker
Neptune
Orion
Orion
Viking
Blackbird
Shooting Star
Corsair II
Corsair II
Crusader
Skyraider
Skywarrior
Skyhawk
Skyhawk
Counter Invader
Destroyer
Nightingale
Globemaster
Skytrain
Skymaster
Globemaster
Dakota
Phantom II
Phantom II
Phantom II
Skyray
Voodoo
Voodoo
Eagle
Eagle
Eagle
Hornet
Extender
Marlin
Goshawk
Liftmaster
Foxbat
Flogger
Fulcrum
Fulcrum
Foxhound
Phantom II
Spirit
Freedom Fighter
Tiger II
Talon
Talon
275
275
225
160
200
200
248
275
200
172
200
200
LS
160
200
200
200
160
225
160
210
160
160
160
LS
248
248
248
200
275
275
260
261
260
248
235
160
185
160
248
260
259
LS
LS
LS
250
265
225
225
Ply
Tire Size
Rating
25 x 6.75
26 x 8
32 x 9.75-18
52 x 20.5-20
56”
40 x 14
40 x 14
30 x 11.5-14.5
27.5 x 7.5-16
26 x 6.6
28 x 9.0-12
28 x 9.0-14
26 x 6.6
11.00-12
15 x 6.0-6
15 x 6.0-6
32 x 8.8
44 x 13
24 x 5.5
24 x 6.5-14
15.50-20
49 x 17
40 x 14
50 x 21.0-20
17.00-16
15.50-20
25.00-28
17.00-16
30 x 8.0
30 x 11.5-14.5
30 x 11.5-14.5
26 x 6.6
32 x 8.8
31 x 11.5-16
34.5 x 9.75-18
36 x 11 R18
36 x 11-18
30 x 11.5-14.5
52 x 20.5-23
15.50-20
24 x 7.7
15.50-20
8.00 x 2.00(-16.3)
840 x 290(-14.1)
950 x 300(-18.4)
840 x 360(-14.2)
840 x 290(-14.1)
840 x 290(-16)
1300 x 360(-25.5)
30 x 11.5-14.5
34.5 x 9.75-18
27.75 x 8.75 R14.5
26 x 10.0-11
15 x 6.0-6
15 x 6.0-6
43 x 16.0-20
22 x 8.5-11
24 x 8.0-13
20 x 4.4
20 x 4.4
1. MBB/RFB : Messerschmitt Bölkow Blohm/Rhein Flugzeugbau
TL: Tubeless
18
16
22
36
20
26
28
24/26
22
14
22
22
16
8
6
6
16
26
16
18
14
26
24
30
12
14
30
12
26
24/26
26
16
24
22
26
30
30
24/26
30
14
20
20
8*
12*
14*
12*
12*
12*
14*
24/26
26
24
12
6
6
28
16
18
12/14
12/14
Manufacturer
Auxiliary Gear
TT/TL
Ply
TT/TL
Rating
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TT
TT
TT
TL
TT
TT
TT
TL
TL
TL
TT
TT
TT
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TL
TL
TL
TL
TL
18 x 5.5
14
18 x 5.5
14
22 x 6.6-10
18
37 x 13.0-16
28
34 x 9.9
14
28 x 7.7
14
28 x 7.7
14
22 x 6.75-10
18
25 x 6.75
16
22 x 7.25-11.5
8
22 x 5.5
12
22 x 5.5
10
20 x 5.5
14
8.50-10
10
5.00-5
6
5.00-5
6
12.5 x 4.5
14
32 x 8.8
18
18 x 5.7-8
14
18 x 5.7-8
14
36”
12
36 x 11
24
26 x 6.6
10
40 x 16-14
26
9.00-6
10
44”
12
15.50-20
14
9.00-6
10
18 x 5.7-8
14/18
18 x 5.5
14
18 x 5.7-8
14/18
22 x 5.5
12
18 x 5.5
14
18 x 5.5
14
22 x 6.6-10
18
22 x 7.75 R9
26
22 x 7.75-9
26
22 x 6.6-10
20
40 x 15.5-16
28
10.00-7
12
19 x 5.25-10
12
44”
12
500 x 180(-9.8)
6*
520 x 125(-11.4) 6*
660 x 200(-13.1) 8*
570 x 140(-12)
8*
570 x 140(-12)
8*
570 x 140(-12)
8*
700 x 200(-13.1) 8*
18 x 5.5
14
22 x 6.6-10
18
18 x 5.7-8
18
15 x 6.0-6
6
TT
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TL
TL
TT
TT
TT
TT
TL
TL
TT
TT
TL
TL
TT
TT
TL
TT
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TT
TL
TL
TT
TT
TT
TT
TT
TT
TT
TL
TL
TL
TT
34 x 14.0-14
18 x 6.5-8
18 x 6.5-8
18 x 4.4
18 x 4.4
TL
TL
TL
TL
TL
26
12
12
6
6
CH: Single Chine
Model
Popular Name
Speed
Special
Rating
design
(mph)
NORTHROP
Tailwheel
CH
CH
CH
CH
DCH: Dual Chine
T-38A/B
F-20
NORTHROP-GRUMMAN B-2
PANAVIA
Tornado
Tornado
Tornado
Tornado
PIAGGIO
PD-808
PILATUS
PC-7
PC-9
PIPER
U-11A
PZL-MIELEC
I22/M93/M95
PZL-WARSZAWA
PZL130
ROCKWELL
B-1B
INTERNATIONAL
F-86
F-100
OV-10(A-F)
RA5C
Shuttle
T-2 (B, C D, E)
T-39 Sabreliner
T-28A, D Trojan
U-4A Aero Commander
X-15
XB70A
SAAB-SCANIA
J 32B
J 35
J 35
JA 37
JA 37
JAS 39
SAAB 105
SHORTS
223
S-312
SIAI-MARCHETTI
S.211
S.211A
SF.260
SM.1019 .
SOCATA
TB30
TB31
SUKHOI
SU 17
SU 20
SU 22
SU 24
SU 25 / 39
SU 27
TUPOLEV
TU 16 Badger
TU 22 Blinder
TU 22 M Backfire
TU 95 Bear
TU 95 Bear
TU 142 Bear
TU 160 Blackjack
VALMET
L-70
L-90
YAKOVLEV
YAK 38
YAK 38M
YAK 130
TL: Tubeless
Talon
Tiger Shark
NETMA
NETMA
Holliman
Hot & High
Aztec
Iryda
Orlik
Sabre
Super Sabre
Bronco
Vigilante
Buckeye
Valkyrie
Lansen
Draken
Draken
Viggen
Viggen
Grippen
Tucano
Sherpa
Eplison
Omega
225
265
174Kt
235
235
276
276
190
160
160
LS
276
200
250
160
200
259
160
200
160
160
225
200
200
174kt
174k
217
160
160
190
LS
160
LS
LS
LS
LS
Fitter
Fencer
Frogfoot
Flanker
LS
LS
Main Gear
Tire Size
Ply
Auxiliary Gear
TT/TL
Tire Size
Rating
20 x 4.4 R12
24 x 8.0-13
43 x 16.0-20
30 x 11.5-14.5
30 x 11 5 R14.5
30 x 11.5 R14.5
30 x 11.5-14.5
24 x 7.7
6.50-8
20 x 4.4
7.00-6
670 x 210(-12)
500 x 200
B46 x 16.0-23.5
26 x 6.6
30 x 8.8
29 x 11.0-10
36 x 11
44.5 x 16.0-21
24 x 5.5
26 x 6.6
24 x 7.7
8.50-10
TT/TL
Rating
14
18
28
26
26
26
26
14
8
8
8
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TT
30
14
22
10
28
34
12
14
10
6
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
40 x 17.5-18
32 x 9.5-16
30 x 7.7
40
14
14
TL
TL
TL
26 x 6.6
26 x 6.6 R14
25.5 x 8.0-14
24 x 7.7
22 x 6.75-10
34 x 10.75-16
6.50-8
6.50-8
6.00-6
7.00-6
15 x 6.0-6
15 x 6.0-6
880 x 230(-18.5)
880 x 230(-18.5)
880 x 230(-18.5)
950 x 300(-18.4)
840 x 360(-14.2)
1300 x 350(-19.6)
1100 x 330(-19.9)
1160 x 290(-24.5)
1030 x 350(-19.6)
1450 x 450(-24.8)
1500 x 500(-24.7)
1100 x 330(-19.9)
1260 x 425(-21.7)
6.00-6
17.5 x 6.25-6
660 x 230(-13.2)
660 x 230(-12)
660 x 230(-13.2)
14
14
16
10
8
12
8
TL
TL
TL
TL
TL
TT
TL
6
6
6
6
12*
12*
12*
10*
12*
14*
12*
12*
14*
18*
18*
10*
18*
6
6
8*
10*
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TT
TT
TL
TT
TT
TL
TL
TT
TL
Ply
Special
design
18 x 4.4
18 x 6.5-8
34 x 14.0-12
18 x 5.5
18 x 5.5
18 x 5.5
18 x 5.5
18 x 5.5
6.50-8
16 x 4.4
6.00-6
430 x 170
500 x 200
35 x 11.5-16
22 x 7.25-11.5
18 x 4.4
7.50-10
26 x 6.6
32 x 8.8
20 x 4.4
18 x 4.4
24 x 7.7
6.00-6
18 x 4.4
14 x 4.5-8
6
12
24
14
14
14
14
10
8
8
4
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TT
22
8
12
12
16
20
10
6
10
6
12
8
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TT
TT
TL
22 x 5.5
10.00”
18 x 5.5
18 x 5.5
14 x 5.5-6
6.00-6
5.00-5
9.00-6
5.00-5
5.00-5
5.00-5
8 x 3.0-4
5.00-4
5.00-5
660 x 200(-13.1)
660 x 200(-13.1)
660 x 200(-13.1)
660 x 200(-13.1)
660 x 200(-13.1)
680 x 260(-14)
900 x 275(-16)
1000 x 280(-19.6)
1000 x 280(-19.6)
1100 x 330(-20)
1140 x 350(-19.9)
1140 x 350(-19.6)
1080 x 400(-18.3)
5.00-5
5.00-5
660 x 155(-13.2)
570 x 140(-12)
550 x 150(-9)
10
8
12
12
8
8
14
10
10
TT
TT
TL
TL
TL
TL
TT
TT
TL
6
TT
6
6
8*
8*
8*
8*
8*
8*
10*
10*
10*
10*
10*
10*
14*
4
6
8*
8*
TT
TT
TT
TT
TT
TT
TT
TL
TT
TT
TT
TL
TT
TT
TL
TT
TT
Skids
Tailwheel
DCH
DCH
Tailwheel
CH: Single Chine
DCH: Dual Chine
71
ROTARY WING AIRCRAFT
Manufacturer
Model
Popular Name
Speed
Rating
Main Gear
Tire Size
(mph)
AGUSTA
72
A109A
A129
CH-47C
H-3
H-3/S-61
Bell Helicopter
214
Textron
B222
XVI 5
BOEING HELICOPTER CH-46F
CH-47A
CH-47B
CH-47C, D
234
DENEL
AH2A
EUROCOPTER
SA.319
SA.321
SA.330
AS.332
SA 332 L
SA360
AS.365 M
SA 365 N
SA 365 N
AS.366 G
AS.366 G
AS 532
AS.565
665
KAMAN
HH-2D
HH-43B
HH-43F
SH-2D
SH-2F
SH-2G
UH-2C
KAWASAKI
CH-47J
KV-107/II
MC DONNELL DOUGLAS AH-64A
HELICOPTER
AH-64D
MI
MI 24
MI 26
MI 8
NH INDUSTRY
NH 90
SIKORSKY
CH-53A, D
CH-53E
H-34
H-3B, D, E
H-54A
H-54B
S-58
S-61
S-70A
S-76
S-76B
H-76
HH-52A
HH-53B, C, H
SH60B
UH-60A
WESTLAND
Commando
Lynx
Lynx
Scout
Sea King
Sea King Mk1
Wessex
Westland 30
TL: Tubeless
Sea Knight
Chinook
Chinook
Chinook
Chinook
Rooivalk
Alouette III
Super Frelon
Puma
Super Puma
Super Puma
Dauphin
Dauphin 2
Dauphin 2
Dauphin 2 Alt
Dauphin
Dauphin Alt
Cougar
Panther
Tigre
SeaSprite
Huskie
Huskie
SeaSprite
SeaSprite
Super SeaSprite
SeaSprite
Chinook
Apache
Longbow
Sea Stallion
Super Stallion
Choctaw
Sea King
Skycrane
Skycrane
Eagle
Sea Stallion
Seahawk
Blackhawk
Mk2, 3, 8
Mk9
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
160
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
LS
L5
L5
LS
LS
LS
LS
LS
LS
LS
LS
LS
Ply
Auxiliary Gear
TT/TL
Tire Size
Rating
360 x 315-6
8.50-10
6
8.50-10
12
6.50-10
6
6.50-10
6
19.5 x 6.75-8
10
6.00-6
8
6.50-8
8
18 x 5.5
8
22 x 5.5
12
8.50-10
8
8.50-10
12
8.50-10
12
615-225-10
12
355 x 150-4
4
7.00-6
8
7.00-6
8
615 x 225-10
12
615 x 225-10
8
355 x 150-4
380 x 150-6
6
380 x 150-6
6
15 x 6.0-5
6
15 x 6.0-6
6
380 x 150-6
8
615 x 225-10
12
15 x 6.0-6
8
23 x 9.0-8
10
17.5 x 6.25-11
8
5.00-5
10
5.00-5
10
17.5 x 6.25-11
8
17.5 x 6.25-11
8
17.5 x 6.25-11
8
17.5 x 6.25-11
8
8.50-10
12
18 x 5.5
8
8.50-10
10
8.50-10
10
720 x 320(-9.7) 10*
1120 x 450(-19) 10*
865 x 280(-17)
8*
615 x 225-10
12*
8.50-10
10
8.50-10
12
11.00-12
8
6.50-10
6
12.50-16
12
8.50-10
12
11.00-12
8
6.50-10
6
26 x 10.0-11
12
14.5 x 5.5-6
12
14.5 x 5.5-6
14
14.5 x 5.5-6
14
6.50-10
6
8.50-10
10
26 x 10.0-11
10
26 x 10.0-11
12
6.50-10
6
18 x 5.5
6
8.50-10
10
13.5 x 4.25-6
8
6.50-10
10
6.50-10
6
11.00-12
6
6.50-10
10
Ply
TT/TL
Rating
TL
TL
TT
TL
TL
TT
TT
TL
TL
TL
TT
TT
TT
TL
TT
TL
TL
TL
TL
TT
TT
TT
TT
TT
TL
TT
TL
TL
TT
TT
TL
TL
TL
TL
TT
TL
TL
TL
TT
TT
TT
TT
TL
TL
TT
TL
TL
TL
TT
TL
TL
TL
TL
TL
TL
TL
TL
TL
TL
TT
TL
TT
TL
TL
TT
TL
360 x 315-6
Special
design
TL
8.50-10
6.00-6
6.00-6
5.00-5
5.00-5
5.00-4
18 x 5.5
16 x 4.4
8.50-10
8.50-10
8.50-10
6.00-6
355 x 150-4
7.00-6
7.00-6
7.00-6
7.00-6
260 x 80-4
13 x 5.0-4
13 x 5.0-4
12
8
8
10
10
6
8
8
8
12
12
8
4
8
8
8
8
TT
TT
TT
TT
TT
TT
TL
TT
TT
TT
TT
TL
TT
TL
TL
TL
TL
5.00-4
330 x 130-4
7.00-6
5.00-4
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
5.00-5
8.50-10
18 x 5.5
5.00-4
5.00-4
480 x 200
900 x 300
595 x 185
6.00-6
8.50-10
8.50-10
6.00-6
6.00-6
8.50-10
8.50-10
6.00-6
6.00-6
15 x 6.0-6
5.00-4
5.00-4
5.00-4
5.00-5
8.50-10
6.00-6
15 x 6.0-6
6.00-6
13.5 x 4.25-6
6.00-6
4.00-3.5
6.00-6
6.00-6
6.00-6
6.00-6
6
6
8
6
8
6
10
10
6
6
6
6
12
8
14
14
4*
8*
4*
10*
10
12
6
8
10
12
6
8
6
12
14
14
6
10
8
6
8
6
8
4
8
8
6
8
TT
TT
TL
TT
TL
TT
TT
TT
TT
TT
TT
TT
TT
TL
TL
TL
TT
TT
TT
TT
TL
TL
TT
TL
TL
TL
TT
TT
TT
TL
TL
TL
TT
TL
TL
TT
TL
TT
TL
TT
TL
TL
TT
TL
Taiwheel
Taiwheel
Helpful conversion factors
Unit
Conversion
Unit
Unit
Conversion
Unit
in (inch)
ft (foot)
yd (yard)
mi (mile)
nautical mile
nautical mile
x 25.4
x 0.3048
x 0.9144
x 1.6094
x 1.1515
x 1.8532
= mm
=m
=m
= km
= mi (mile)
= km
mm (millimeter)
m (meter)
m
km (kilometer)
mi (mile)
km
x 0.03937
x 3.281
x 1.0936
x 0.6214
x 0.8684
x 0.5396
= in
= ft
= yd
= mi
= nautical mile
= nautical mile
Speed
mph (mile per hour)
mph (mile per hour)
mph (mile per hour)
kt (knot)
kt (knot)
ft/s (foot per second)
ft/s (foot per second)
x 1.6094
x 0.4470
x 0.8684
x 1.8532
x 0.5144
x 1.0973
x 0.3048
= km/h
= m/s
= kt
= km/h
= m/s
= km/h
= m/s
km/h (kilometer per hour)
m/s (meter per second)
kt (knot)
km/h
m/s
km/h
m/s
x 0.6214
x 2.2371
x 1.1515
x 0.5396
x 1.9440
x 0.9113
x 3.2808
= mph
= mph
= mph
= kt
= kt
=ft/s
= ft/s
Acceleration
ft/s2 (foot per second)
x 0.3048
= m/s2
m/s2
x 3.2808
= ft/s2
oz (ounce)
lb (pound)
lg ton (long ton = 2240 Ib)
sh ton (short ton = 2000 Ib)
x 28.349
x 0.4536
x 1.0160
x 0.9072
=g
= kg
=T
=T
g (gram)
kg (kilogram)
T (metric tonne)
T
x 0.0353
x 2.2046
x 0.9842
x 1.1023
= oz
= lb
= Ig ton
= sh ton
Load
Ib
x 4.4482
=N
N (Newton)
x 0.2248
= Ib
Torque
In.oz (inch.ounce)
In.lb (inch.pound)
x 0.007064
x 0.1130
= N.m
= N.m
N.m (Newton.mètre)
N.m
x 0.001416
x 8.850
= in.oz
= in.lb
Inertia
Slug.in2 (slug.square inch)
x 0.0094
= kg.m2
Kg.m2 (kilogram.square meter)
x 106.20
= Slug.in2
Pressure
psi (pound per square inch)
psi (pound per square inch)
bar
x 0.06897
x 0.0703
x 1.0193
= bar
= kg / cm2
= kg / cm2
bar (=100 kPa : kiloPascal)
kg / cm2
kg / cm2
x 14.4992
x 14.2247
x 0.981
= psi
= psi
= bars
Temperature
(°F (degree Fahrenheit) -32)
x 0.5556
= °C
°C (degree centigrade)
(x 1.8) + 32
= °F
Length
Mass
73
Note
74
Michelin Aircraft Tyre
Research &
Development
Retread Service
Centers
23, place des Carmes-Déchaux
Charlotte - U.S.A.
Bourges - France
63040 Clermont-Ferrand Cedex 9 - France
Greenville - U.S.A.
Cuneo - Italy
Tel: 33 (0)4 73 32 76 40 - Fax: 33 (0)4 73 32 76 42
Ladoux - France
Kansas City - U.S.A.
Nong Khae - Thailand
Commercial Offices
North, Central and South America :
Norwood - U.S.A.
1305 Perimeter Road
Manufacturing
Plants
Greenville, SC 29605 - United States
Bourges - France
Tel: 1 864 422 7000 - Fax: 1 864 422 7071
Nong Khae - Thailand
Europe, Middle East and Africa:
Norwood - U.S.A.
Michelin Aircraft Tire Corporation
Reference: #MAT-DB-01 Rev.A
Michelin Aircraft Tyre
23, place des Carmes-Déchaux
63040 Clermont-Ferrand Cedex 9 - France
Tel: 33 (0)4 73 32 76 36 - Fax: 33 (0)4 73 32 76 44
Far East and Oceania:
Michelin Aircraft Tyre Asia
SPE Tower 12th Floor
252 Phaholyothin Road
Samsaen Nai, Payathai
Bangkok 10400 - Thailand
Tel: (66 2) 619-3530 - Fax: (66 2) 619-3069
www.michelinair.com
Studio graphique Michelin
Headquarters

Aircraft tire data

Transcription

Similar documents

united states bankruptcy court southern district of new york

Republic of the Philippines