C4 with shift kit, and B" 3.40 geared posi rear end

Transcription

C4 with shift kit, and B" 3.40 geared posi rear end
.:rli:rli.*lrlll
,1ir1,..-:11;;q1
;r'r'
\
I
I
h C's Tony Hall owns this Monroe Handler Mustang.
l{ Here's what he has to say about it. "The original
I-rlsteel boctied Handler was d.esigned for Ho Rod Magazine in the summer of 1977 and built by a company
called Creative Car Craft and owner Dave Kent was the
brain child behind the design.
In late 79i7 and early 1978 six more fiberglass Handlers
were commissioned by Monroe Shock Company (Taneco
Corp)bringing the total amount of Handlers produced to
seven and making it one of the rarest Mustangs ever.
"The original steel bodied Handler had a Roush built
363 (bored 302 with a 351 crank) producing over 400HP
x#
"1,{y Handler has a 1987 roller 5.0 H.O. with 289 heads,
compression ratio of 10.5, Comp Magnum roller rockers,
Keith Black pistons, Edelbrock valve springs, Comp Magnum pushrods, Comp retainers and locks, ARP bottom
end, high volume oil pump, and true ram air. Tranny is a
C4 with shift kit, and B" 3.40 geared posi rear end. Headers
are Hooker headers and side exhaust
"I bought the car two years ago and it was a real basket
case when I went to flatdeck it home. It's taken me two
years to track down all info and photos that I could from
the internet to properly reproduce the interior, paint
scheme,and decals."
\/ll\4,w,canadianhotrods,com
#i4?Volume
7
, Issue 2,
2011
#ffffi Volume T,lssue 2,2011
www.canadianhotrods,com

Similar documents