Dutton-Lainson Company`s StrongArm® Electric Winches Crank
Transcription
Dutton-Lainson Company`s StrongArm® Electric Winches Crank
SECTION Information F MasterLock® Electric Winch Part # Description Tires & Wheels Suspensions & Fasteners Brake Assemblies Hubs and Axles This heavy duty 12 volt electric winch is ideal when you really need to get it done. Equipped with 2,000 lbs of pulling power, this winch can be temporarily mounted to a ball mount or attached to a flat surface with mounting 2953AT plate. Designed with powerful rack and pinion gears, a convenient carrying handle is built-into the winch housing. A remote control, power battery cables, back-up hand crank and hook with safety latch are all included. SA9000AC Switches Pulley Block & Hook Part # Volts/Amps Load Capacity Gear Ratio SA5000 12 volt DC/70 1,500 lbs 189:1 " x 20' (6360) Cable Approximate Load Speed (ft./min.) No Load Full Load Full Reel Empty Reel Full Reel Empty Reel 33 12 8 4 SA5000AC 120 volt AC/6 1,200 lbs 189:1 " x 20' (6360) 35 16 16 9 SA7000 12 volt DC/70 2,200 lbs (2) 189:1 " x 50' (6211) • 16 6 4.5 3.5 SA7000AC 120 volt AC/6 1,800 lbs (2) 189:1 " x 50' (6211) • 17.5 8 9.5 6 SA9000 12 volt DC/70 3,000 lbs 570:1 " x 25' (6361) 11 5 4 2.5 18 6 7 3.5 2.5 2 1.5 SA9000AC 120 volt AC/6 2,700 lbs 570:1 " x 25' (6361) SA12000 12 volt DC/70 4,500 lbs (2) 570:1 " x 50' (6212) • 5 SA12000AC 120 volt AC/6 4,000 lbs (2) 570:1 " x 50' (6212) • 9 3 4 2 Strap TW4000 TW9000 12 volt DC/40 1,500 lbs 12 volt DC/70 3,000 lbs 324:1 2" x 20' (6149) 22 11 8.2 4.4 570:1 2" x 20' (6251) 15 9 6.3 4.3 * StrongArm Electric Winch rating is based on a 10' pull starting with 10' of cable already on drum. Powerwinch rating is on first layer of cable on drum. * Double line operation with furnished pulley block & hook. StrongArm® Accessories Crank Handle Part # 6364 Description Zinc plated Tuffplate® finish. Fits SA models and TW9000. Features spring loaded safety clip. Winch Cover Part # F24 TW4000 Dutton-Lainson Company’s StrongArm® Electric Winches Brake Actuating Systems Locks & Cargo Control Lights & Electrical Boat Trailer Parts Body Components Hitches & Towing Accessories Couplers, Jacks & Winches SA5000 6363 Description Keep all StrongArm® winches clean, dry and looking like new. Strong vinyl. Individually packaged. SECTION F In-Cab Switch Receptacle 6367 Description Electrical Quick Connect 6385 Description For all 12 volts DC SA models and TW9000. Ball Adapter Plate 6366 Description Makes StrongArm SA Series winch available for instant mount operation. Bolt plate to winch, slip pear-shaped cutout over any standard front or rear mounted hitch ball up to 2". Zinc plated Tuffplate® finish. 6349 Description Remote Hand-Held Switch 6371 Description For 12 volt DC StrongArm SA winch models. Permits user to operate winch from location up to 10 feet away. Control box mounts on or next to winch and plugs directly into winch switch pocket without rewiring. Durable hand-held pendant switch can be unplugged for safe storage. 6362 Description Fits 12 volts DC SA models except those ending in 12. 25' power cable, 8' ground cable, #8 wire with switch and 80 amp circuit breaker. Part # For 120 volt AC StrongArm winch models. Provides 10-foot remote hand-held switch unit for wiring directly to winch. Pendant has an “In-OffOut” switch similar to power switch provided on all 120 volts AC StrongArm winch models. Switches 6372 Description Brake Actuating Systems Remote Hand-Held Switch Locks & Cargo Control Part # Lights & Electrical Wiring Harness Boat Trailer Parts Part # Body Components Fits all 120 volt AC StrongArm electric winch models. Dual switch controls raise or lower and power. Provides dynamic braking function. Dynamic brake supplements mechanical brake to bring a load to an immediate halt without coasting. Hitches & Towing Accessories Part # Couplers, Jacks & Winches Dynamic Brake Remote Control Tires & Wheels Part # Suspensions & Fasteners Part # Brake Assemblies For 12 volt DC StrongArm SA winch models. Mounts under dashboard for winch operation from inside cab. Includes switch bracket and 10' of wire. Plugs directly into winch switch pocket without rewiring. Hubs and Axles Part # Information StrongArm® Accessories (Continued) F25
Similar documents
Owner`s Manual - Dutton
Keep hands and fingers clear of the drum and cable area of the winch when operating. Do not attempt to guide the cable by hand as it rewinds on the drum. Special care should be taken with 120-volt ...
More informationPulling Winches with Ratchet Feature
to 55 pounds. This means that the winch should be able to be cranked easily with one hand. If not, it is probably overloaded. D-L winches are not designed to be used as hoists for lifting, supporti...
More information