Wedges by Double Taper™
Transcription
Wedges by Double Taper™
Faller's Wedges Wedges by Double Taper™ Piller Plastics, the maker of DOUBLE TAPER brand faller's wedges, has been making wedges since 1963. They are the first choice of professional timber fallers everywhere. Some Double Taper wedges have smooth surfaces and some are textured. Wedges with smooth surfaces drive the easiest, but textured wedges hold a little better in the tree. Part # Size Description TEXTURED List Price DOUBLE LIFT SINGLE LIFT MADSEN’S PRICE 1-11 ea 12-47 ea 48+ ea Double Taper™ Standard Double Taper wedges are made of hard ABS plastic and feature a bright orange top. They are durable all-season wedges #59-A 51⁄2" #97-A 7" #98-A 8" #100-A 10" #110-A 10" #111-A 10" #112-AS 12" #112-AT 12" #114-A 12" Textured........................................................ 399 Double Lift - Smooth..................................... 889 Smooth......................................................... 810 Smooth......................................................... 889 Double Lift - Smooth..................................... 990 Textured........................................................ 955 Smooth........................................................ 1310 Textured....................................................... 1310 Extra Wide - Smooth.................................... 1375 335 760 675 760 835 795 1095 1095 1155 1495 310 695 615 695 765 725 995 995 1045 1395 285 665 580 665 725 685 945 945 985 1285 #115-A* 15" Smooth........................................................ 1795 *Note: The 15" wedge has a unique rounded tip and extra lift. In addition to its use as a wedge in large trees, it's often used as a hammer for setting smaller wedges. Double Taper™ Super-Tuff Double Taper Super-Tuff wedges are made of tough poly plastic. This is a softer material than ABS. They are a good choice when working in cold conditions. We have never had a broken one, but because they are soft, the heels tend to "beat over" more quickly than ABS wedges. #96-P 8" #111-P 10" #112-PT 12" Poly Textured................................................ 425 Poly Textured................................................ 590 Poly Textured................................................ 735 365 510 615 335 475 570 315 450 535 Double Taper™ Red-Top Double Taper Red-Top wedges are made of ABS plastic. The wedge body is white and has a red top. Their look is similar to a K & H wedge, but they are less expensive. #10-RT 10" Smooth. .............................................. 855 625 575 540 “The Pro’s Choice” 1 l Faller's Wedges Wedges MADSEN'S wedges are premium grade hi-impact plastic wedges made by Piller Plastics. These wedges offer both quality and extra value. Part # Size Description Blue Ox - Single Lift - Hard - Blue Plastic # 8B-WGM List Price MADSEN’S PRICE 1-11 ea 8" Lightly Textured............................................. 685 #10B-WGM 10" Lightly Textured............................................. 830 #12B-WGM 12" Lightly Textured............................................ 1155 Blaze Pro - Single Lift - Hard - Fluorescent Orange Plastic #OFL-96M 8" Lightly Textured............................................. 510 #OFL-105M 10" Lightly Textured............................................. 620 #OFL-112M 12" Lightly Textured............................................. 830 12-47 ea 48+ ea 420 475 675 380 435 610 365 410 570 430 490 690 395 445 630 375 420 585 K & H Wedges K&H faller's wedges are known for being easy to drive and having great lifting power. Size Description K&H - Single Lift - Hard - White Plastic with a Red Colored Top 7 1⁄2" Lightly Textured.................................................................895 10" 12" MADSEN’S PRICE List Price Lightly Textured............................................................... 1045 Lightly Textured............................................................... 1250 1-11 ea 765 825 1045 12-47 ea 695 765 965 48+ ea 645 725 915 Mag Aluminum Driver Wedge MAG ALUMINUM DRIVER WEDGE can be used like a regular wedge for lifting or as a driver to set plastic wedges. It features a “hand hold” cast into each side for extra grip when using it as a driver. 2 List 2575 1-11 1985 MADSEN’S 12+ Call 1820 (360)736-1336 24 hours Faller's Wedges Black Bear Rifled Faller’s Wedges Timber Fallers: How many times have you had a tree sit back because the stack of wedges you were driving twisted? BLACK BEAR WEDGES were designed by a timber faller. Each wedge has a pair of grooves and matching rails to keep them aligned when they are stacked. This overcomes the problem conventional wedges have of skewing sideways at a crucial time. Black Bear Wedges help: • Save time • Increase productivity • Make tree work safer • Aid tree placement Part # Size Description Black Bear - Single Lift - Hard - Yellow ABS Plastic #8-BEAR #10-BEAR #12-BEAR Smooth................................................... 829 12" Smooth.................................................. 1235 10" Smooth................................................... 920 Leather Pouch 25 90 MADSEN’S 6+ 1995 1895 12-47 ea 695 735 995 48+ ea 645 680 905 615 640 870 UTILITY BELTS are tough and adjustable. They work great with a wedge pouch, a Little Shot pouch, or an axe holder. Nylon Pouch List 1300 1-5 995 MADSEN’S 6+ MADSEN’S PRICE 1-11 ea Utility Belts We carry two types of wedge pouches: one is a leather pouch, the other is made of tough Cordura nylon. Both pouches are the same size and have space for two or three wedges and a file or bar tool. 1-5 List Price 8" Wedge Pouches List Top View MADSEN’S PRICE 650 50 Web Belt with Grommets..... 8 Web Belt.............................. 895 “The Pro’s Choice” 3 l Axes Council Faller's Axe The COUNCIL FALLER'S AXE head features a narrow-ground bit for chopping, thick cheeks for strength, and a finish-ground poll (heel) for driving plastic wedges. The head is made from American bar quality steel, but patterned from a European style, so you might find them a little heavy for their weight classification. It is also drop forged, heat treated, and ground. Axes & Mauls Style Axe Type Handle List 1-5 ea 4810 3.5 lb Axe with 20" handle 6500 4 lb Axe with 28" handle 7125 5 lb Axe with 28" handle 7440 6 lb Axe with 36" handle 3295 4495 4895 4995 6 +ea 3150 4350 4750 4850 The axes and mauls listed below are fitted with hand-selected hickory handles (except for the 12 lb. maul). MADSEN’S PRICE Head Size Description Handle Type 1 3/4 lb Hunter’s Hatchet 18” curved 2095 1595 1495 2 1/4 lb Boy’s Axe 28” curved 2475 1795 1695 3 1/2 lb Crown Double Bit 36” straight 3285 2495 2395 3 1/2 lb Michigan Axe 28” straight 3675 2895 2795 3 3/4 lb Pulaski • A necessity in the firebox 36” straight 4045 2995 2895 6 lb Splitting Maul 36” straight 3340 2495 2395 8 lb Splitting Maul 36” straight 3630 2695 2595 12 lb Splitting Maul 30” straight 5195 3995 3795 5 lb Splitting Wedge none 2290 1595 1435 4 MADSEN’S • A great camping hatchet • A perfect kindling axe • A good axe for the firebox • A great all-around choice for a faller’s axe • A good tool for splitting small sized firewood • A good tool for splitting large sized firewood • Drop-forged high-carbon steel head. Cushion grip, all steel handle. Shape of head prevents sticking. • An aid for splitting stubborn firewood Call List Price 1-5 ea 6+ ea (360)736-1336 24 hours Hickory Axe Handles Hickory Handles HIGH GRADE HICKORY is a tough and dense wood from which the finest tool handles are made. They are durable, they hold metal heads when properly installed, and they absorb some of the vibration created when a striking tool is used for chopping or pounding. Over the years we have experimented with handles made from other materials (such as fiberglass), but most loggers and timber fallers always come back to premium hickory handles. Type Length/Description List Price 28" boys, single bit curved 1465 36" axe, single bit curved 1465 28" axe, fits 4# & 5# Council 1465 36" axe, fits 6# Council 1465 28" cruiser, double bit 1465 36" crown, double bit 1465 30" sledge 1465 36" sledge 1465 36" heavy sledge 1465 36" maul axe eye 1465 54” peavey 6095 MADSEN’S 1-11 12+ 1095 995 1095 995 1095 995 1095 995 1095 995 1095 995 1095 995 1095 995 1095 995 1095 995 4695 Axe handles come with wood mounting wedges only. Extra wood mounting wedges are 25¢ each. Metal mounting wedges are 45¢ each and come in two sizes: small & medium. Madsen’s Custom Rafting Axe Handles TUNE YOUR AXE to your body – just pick the handle length that best fits your swing and axe head weight. All custom handles are straight single bit style. They are made from premium grade white hickory for maximum strength and durability. They are available in the following lengths: 20", 26", 28", 30", 32", & 36". MADSEN’S 1-11 12+ 1095 995 “The Pro’s Choice” 5 | Master Page Sabbards Aluminum Axe Scabbard The ALUMINUM AXE SCABBARD is made of lightweight tempered aluminum. This lightweight material is also tough and will last much longer than scabbards made from other materials. It is designed to stay clean of dirt, bark, and sawdust. Fitting instructions: Axe should be about 1⁄8" smaller than the scabbard to go into and out-of the scabbard smoothly and freely. MADSEN’S # Fits Axe Size #6 Fits 3 lb - 31⁄2 lb axes #7 Fits 4 lb axes #8 Fits 5 lb axes #9 Fits 6 lb axes 2160 2245 2330 2460 Byte Tyte Chainsaw Scabbard Mount The BYTE TYTE is a chainsaw mounting device used to safely transport a ready-to run chainsaw on a 4-wheeler, a snowmobile, a tractor, a motorcycle, or any type of equipment. Forget elastic cords that take time to hook and unhook, and eventually get cut by the saw chain. With a Byte Tyte, simply slide the saw's bar and chain into the opening, then turn the screw-clamp to hold the saw in place. When you are ready to use the chainsaw, a reverse turn of the clamp releases it just as quickly. For proper protection and coverage, a Byte Tyte must be fitted to the saw it carries. It is available in 13”, 16”, 20”, 24”, and 30” lengths. Custom lengths are available by special order. Item The Byte Tyte's all-aluminum construction does not damage the saw's chain, and at the same time, it protects the area around the saw's chain from being damaged by it. 6 16" Scabbard 20" Scabbard 24" Scabbard Call List MADSEN’S 7050 7150 7350 6750 6850 6950 (360)736-1336 24 hours Hand Tools Master & Fire Tools Page Shovel & Hand Tools PEAVEY 54" handle List 11795 1-5 9395 MADSEN’S 6+ 8895 SHOVEL with foot rest List 1595 1-5 1095 MADSEN’S 6+ 995 1 1/2 lb HOOKAROON 36" curved handle List 5050 MADSEN’S 1-5 6+ 39 MACHETE with hand-grip List 1550 1-5 995 MADSEN’S 95 3895 6+ 895 Fire Pump Can The BAK-PAK Fire Pump Can is recommended for forest and grass fires or whenever a hand held water extinguisher is required. The reservoir will hold five gallons of water which can be squirted on a fire with a brass hand pump. Fire Extinguisher The SMALL FIRE EXTINGUISHER is a safe, clean, and fast way to suppress a small wood, paper, liquid, or grease fire. It is not for use on electrical fires. No shaking is necessary and its non-powder agent is non-toxic, biodegradable, and environmentally safe. Contains 16 oz. The extinguisher and pouch are sold separately. List 22595 MADSEN’S 15450 Extinguisher Pouch The EXTINGUISHER POUCH is made of tough Cordura nylon. It has a belt loop attachment for easy carrying. Item #P500S List 1995 List 1100 1-11 1495 1-11 995 MADSEN’S 12+ 1395 MADSEN’S 12+ 895 “The Pro’s Choice” 7 l Automatic Master Page Logger's Measuring Tape Spencer Logger’s Tapes SPENCER automatic tapes are the industry standard for measuring logs. What started out as one logger's tape has grown to a full line of measuring tapes for loggers, engineers, and foresters. Model # # 950 # 950XL # 975 Length MADSEN’S PRICE Description List Price Traditional Logger’s Tape - auto gear drive Blade top: feet, inches, eighths of inches Blade bottom: feet, inches, eighths of inches 65' Same Size as #950 - metric on bottom Blade top: feet, inches, eighths of inches Blade bottom: meters, centimeters 75' Big Version of the #950 - automatic gear drive Blade top: feet, inches, eighths of inches Blade bottom: feet, inches, eighths of inches 50' 1-5 ea 6+ea 5950 3495 6300 3795 3595 7650 4395 4195 3295 Other tapes are available, such as the 100' automatic and various Diameter tapes. Call us. Tape Refills, Repair Ends, & Nails We carry a complete line of repair parts and blades for automatic logger’s tapes. If you need a diameter tape refill or some other specialty blade not listed, please call. We stock many items not listed. Item Image MADSEN’S PRICE Description List Price 50' Standard Refill by Spencer 1595 65' Standard/Metric Refill by Spencer 2135 75' Standard Refill by Spencer 2340 18" Repair End with Loop - Dymax 12” Repair End with Loop - Steel 8 765 1-5 ea 1095 1695 1895 675 6+ea 995 1595 1795 630 485 395 370 Pre-bent Horseshoe Nail 85¢ 65¢ 60¢ Long Straight Horseshoe Nail 35¢ 30¢ 25¢ Scissor Style Swivel Clip 490 395 350 Call (360)736-1336 24 hours Tape Parts & Marking Master Products Page l Spencer Tape Parts Please see the refill page for a complete listing of this item. Description 50' and 65' #950 and #950XL # 1 post screw # 2 gear housing with bearing # 3 main shaft and gear # 4 idler gear and pinion # 5 idler bearing with screw # 6 gear cover plate # 7 nylon guide post with screws # 8 spacer post with 2 screws # 9 tape refill screw #11 spool with pinion gear #12 spring cover plate with bearing #13 super spring assembly #14 hanger and swivel clip #15 locking ring #968 958 952 953 954 957 961 955 966 951 959 956SA 962A 960 Lumber Crayons DIXON lumber crayons are industry standards for marking wood indoors or outdoors. They are made from high quality clays and pigments. Their exclusive process produces the strongest, longest wearing crayon on the market. We carry: Soft Blue, Soft Red, Yellow, and Carbon Black. List 120 1-11 89¢ MADSEN’S 70¢ 144+ 65¢ 12-143 Crayon Holder $ 45 9 Each $ .35 11.70 7.65 5.20 3.35 2.10 1.40 1.20 .35 12.35 3.95 16.30 5.25 2.35 75' #975 #968 978 952 953 954 977 961 955 966 901 979 976SA 962A 980 100' #900 $ .35 12.70 7.65 5.20 3.35 2.35 1.40 1.20 .35 14.25 4.85 19.60 5.25 3.35 #968 978 952 953 954 977 961 955 966 901 979 906SA 962A 980 $ .35 12.70 7.65 5.20 3.35 2.35 1.40 1.20 .35 14.25 4.85 19.95 5.25 3.35 Markal Paintstiks MARKAL "B" PAINTSTIKS are used in log yards and mills where fade resistant marking is important. Paintstiks make long-lasting weather resistant marks on rough, smooth, wet, or dry surfaces. White is priced below. We also stock: Red, Blue, and some Fluorescent colors. These are slightly more expensive. Call for prices. List 175 MADSEN’S 1-11 12-143 144+ 125 110 105 “The Pro’s Choice” 9 Measuring Tools Humidity Tester Test humidity easily with this battery operated thermometer/hygrometer. No more slinging thermometers or wetted wicks. This hand held tester measures temperature and humidity with a simple touch of a button. List Price Item# 490-72655 MADSEN’S List Price 64 17000 MADSEN’S PRICE 95 The HAND COUNTER is a 4-digit model with a wire finger ring. Counter is easily reset with one turn of the knob and is easy to read. MADSEN’S The HIP CHAIN attaches to your belt and measures distance as you walk. Just tie the string to a tree, set the meter at zero and walk. Your hands are free and there is no tape to tangle up. There is approximately 4500' of string on a roll. 8000 Hand Tally Counter List Price Hip Chain 13450 Item# 350-ASCFF Extra White String 495 Scribner Scale Book 1150 The SCRIBNER SCALE BOOK contains log volume tables. It is printed on rain proof paper and has a durable poly cover. Book is pocket sized for convenient carrying. 950 Notebooks List 1365 1-11 1195 MADSEN’S NOTEBOOKS contain 50 lined pages and are spiral bound. They fit easily in a large shirt or hip pocket. Notebooks work great for keeping track of scale or other records. 12+ 1095 Key Bak belt loop Shirt Pocket Size 525 List 675 1-11 445 1-11 545 12+ 10 Hip Pocket Size List MADSEN’S 405 spring clip MADSEN’S 12+ 485 Keep your keys or crayon holder handy with a KEY BAK. It is available with either a spring clip or belt loop so you can hook 'em on your suspenders or jeans. Call List 1389 1-11 895 MADSEN’S 12+ 795 (360)736-1336 24 hours Marking Products Tree & Log Paint RUDD AEROSOL marking paint is fast, convenient, and easy to use. It makes highly visible marks that are resistant to weathering. Shipping is free on orders of 50+ cases or large quantity bulk purchases. Call for more information on shipping and delivery. Call for quotes on quantity purchases. MADSEN’S Type List Price Tree and log paint 13 oz aerosol 1-11ea 645 525 480 805 655 595 Colors are: Orange, Red, Blue, Green, White, Yellow, Black Hi-viz fluorescent paint 12 oz aerosol 12+ea Colors are: Red/Orange, Blue, Green We can now send this UPS! Call today. Roll Flagging This flagging is the brightest and toughest we can find. It has extra plasticizers for increased flexibility and cold weathering. It also has a high tensile strength. The glo colors have extra coloring for longer life. It is made in the USA and meets or exceeds GSA requirements. Color/Type Size Roll Length List 50 yards 230 Standard Flagging Colors: Orange Glo, Pink Glo, Blue Glo, Lime Glo 1 3⁄16" Red, White, Blue, Yellow, Green 1 3⁄16" 100 yards Red/White Stripe, Blue/White Stripe 1 3⁄16" 100 yards Printed Boundary & Hazard Flagging Type & Color: 230 349 MADSEN’S PRICE 1-11ea 199 199 299 12+ea 144+ea 169 149 239 209 169 149 339 Danger-Stop-Danger (Orange Glo) 1 1⁄2" 50 yards 399 289 259 Timber Harvest Boundary (Pink Glo) Custom flagging printed with your company name or Property Line (Pink Glo) special message is available. Call for information about Streamside Management Zone (Orange Glo) minimum order size, set-up charges, and lead time. “The Pro’s Choice” 11 l Master Tree Pruning Page Tools Hand Pruning Saw Throwline Sling Shot The Big Shot Line Launcher can shoot your throw weight up to a hundred feet into a tree. Kit includes two sturdy fiberglass poles and sling head. Item# 249-541 List 14000 MADSEN’S 12900 FANNO HAND PRUNING SAWS feature high quality tri-edge blades. These blades cut clean and fast saving you time and labor. The blades are manufactured in Japan to Fanno’s specifications. They are then imported into the USA, where marine-grade laminated hardwood handles are installed. The result is a high quality, yet affordable hand saw. Item Complete Saw Blade Only List 2518 1870 1-9 ea 1995 1495 #40017 THROWLINE kit includes storage bag, throw weight, and 150’ line. These lines are strong and easy to spot in the tree. 10+ ea Item# 249-521 1795 List 4195 MADSEN’S 1250 3/4" Hand Pruners #40012 Throwline Kit 3200 Rope & Gear Bags #40150 PHOENIX HAND PRUNERS have forged hooks and blades. Both the #40012 and #40150 are made of high-carbon Japanese steel. They also have rounded steel handles and an ergonomic grip. Pruner #40012 #40017 #40150 12 List 1295 695 2250 MADSEN’S 11 550 1800 00 MADSEN’S Bags #BAG102 Fits 150’ 1/2” Rope #BAG103 Fits 225’ 1/2” Rope #BAG113 Throwline Cube Call 3600 4300 2800 (360)736-1336 24 hours Climbing Master Page Gear Climbing Rope 1/2” SAMSON ARBORPLEX was one of the first lines ever designed specifically for tree work and remains the choice of many arborists. It is one of the lightest lines we sell, yet has a breaking strength of 6000 lbs. 1/2” SAMSON TRUE BLUE is a premium rope made of 100% polyester. It is a 12-strand single braid, which helps give it is strong 7300 lbs. breaking strength. Rope Arbor Plex 120’ 150’ #AP1215 #AP1260 #TB12 #TB15 #TB60 8700 33900 10700 13300 49900 True Blue Call for a price on a custom length. Rigging Rope SAMSON STABLE BRAID is a great rigging line. Its 2-in-1 double-braid construction is a rope within a rope, giving it strength and improving the way it works in pulleys and other rigging hardware. The breaking strength is: 5/8”- 16300 lbs. & 3/4”- 20,400 lbs. Rope The PORT-A-WRAP III DESCENDER is a tool for lowering heavy branches or tree sections. It acts as a friction device enabling a single person to control loads many times their own weight. By wrapping the rigging line around the Port-AWrap, friction is applied to the rope - the more wraps taken, the more friction applied. This simple tool has a capacity of up to 2000 lbs. The rope shown is for illustration purposes and is not included. Item# RIG-111 List 15600 MADSEN’S 14000 600’ #AP1212 6900 Lowering Device MADSEN’S 200’ 3/4” Stable Braid w/eye - Orange Item# 249-361 18’ 5/8” Stable Braid w/eye sling - Red 32900 6000 Chainsaw Lanyard 50” CHAINSAW BUNGEE LANYARD breaks away at 250 lbs shock load to help prevent the climber from being pulled out of the tree by a falling load hitting the saw. Not for saws over 15 lbs. Item# 249-451 List 2795 MADSEN’S 2500 48" NON-BREAKAWAY BUNGEE CHAINSAW STRAP is blaze-orange. It also has a dog-leash style snap closure that easily attaches to the ropeloop on today's arborist's chain saws. Item# STR108 List 2300 MADSEN’S 1900 “The Pro’s Choice” 13 l Master Page Climbing Gear Deluxe Leg Pads Spurs & Pads Cast Aluminum Backed Pad with Rubber Cushion If you are starting out or don’t climb often and are looking for a complete set of spurs at a low price, the first kit is a good buy. The second kit is also a good buy and offers a replaceable gaff. If you climb a lot and would like to save weight, the spurs with titanium supports are much lighter. If you just need to replace worn or broken parts on a set of spurs you already own, we carry a large supply of spurs, pads, straps, and accessories - some are not listed. Please call if you need something. Items MADSEN’S #81429RT Steel Spur Kit 00 Steel 3 1/2” Gaff - Non-Replaceable #SB95059T Steel Spur Kit Steel 2 3/4” Gaff - Replaceable #TB95059T Titanium Bucklite Spur Kit Steel 2 3/4” Gaff - Replaceable #91429RT Spur Only Steel 3 1/2" Gaff - Non-Replaceable #SB95089A Spur Only Steel 2 3/4” Gaff - Replaceable #TB95089A Titanium Bucklite Spur Only Steel 2 3/4” Gaff - Replaceable 215 23500 39500 169 00 17900 33500 #3122 Leather L pads 3700 00 #21391 Pair 26” Nylon Spur Strap w/Ring 26 #2649 Pair 26” Nylon Leg Strap 2500 #21341 Pair 26” Leather Strap w/Ring 2800 #2644 Pair 26” Leather Leg Strap 2600 14 Cushion Wrap Pads with Velcro Closure Super-Climber Pads Add-On Pads ALUMINUM PADS have a lightweight cast aluminum body and are lined with dense rubber foam cushioning. Replacement cushions are available. CUSHION WRAP PADS have a metal insert for keeping the shank stationary to reduce chafing. A Velcro wrap closure keeps the pad in place and offers adjustability for maximum comfort. SUPER-CLIMBER PADS are the widest pads without a steel insert. Two straps on each pad also increases support. ADD-ON PADS provide an extra 1/4" of padding and are worn underneath a standard climbing pad They offer additonal comfort and protection to the climber's calf from rubbing by the spur's shank. MADSEN’S Items #249-741 Cast Aluminum Pads #249-761 Replacement Foam Cushion for Cast Pad #3502C Cushion Wrap Pads #249-751 Super-Climber #249-841 Add-On Pad Call 7600 1600 13900 5100 3900 (360)736-1336 24 hours Climbing Master Page Gear Aluminum Climbers Aluminum climbers are lighter that steel and feature a straight shank and offset stirrup. Unlike one-piece climbers, these utilize a molded aluminum "J" portion that is taylor matched to an aerospace quality upright, These are tempered to T6 hardness and assembled with stainless steel fasteners. #91226 Spurs Set with T-Pads #91225 Spur Set with Lightweight Aluminum Pads 27900 24900 #85225 MADSEN’S Books #B00101 Tree Climber's Companion #B0102 Tree Climber's Guide 1600 6500 Foot Plates FOOT PLATES attach to your spurs and spread weight beyond your arch for more comfort. Item# 35033 MADSEN’S 95 #90070 Lightweight Aluminum Pads Only 21900 Rope Pulleys Tree Climber's Books TREE CLIMBER'S BOOKS cover climbing techniques, equipment selection, and much more. #91222 Aluminum Climbers Only #85226 9500 #85229 #85230 #85225 1/2" Fixed Pulley - 20KN Rating #85226 1/2" Swing Pulley - 20KN Rating #85229 5/8" Swing Pulley - 28KN Rating #85230 3/4" Double Swing Pulley - 35KN 1100 1000 1500 1900 Climbing Helmet This CLIMBING HELMET features a polycarbonate shell. Chin straps keep the helmet in place when working at any angle. MADSEN’S 00 Item# 249-943 11800 “The Pro’s Choice” 15 l Master Page Climbing Gear Steel-Core Flip-Line The STEEL-CORE FLIP-LINE is made of bright orange 5/8” or 1/2" polyester rope braided over 1/4” steel wire cable. This makes the flip-line strong and cut-resistant. A locking swivel snap is included. The flip-line is available with or without the rope grab flip line adjuster and twisted clevis. Flip Line Item Flip Line with Ascender MADSEN’S 11300 00 1/2" X 10' Line with Adjuster 117 00 1/2" X 12' Line with Adjuster 119 00 1/2" X 15' Line with Adjuster 121 00 1/2" X 18' Line with Adjuster 123 00 5/8" X 8' Line with Adjuster 115 00 5/8" X 10' Line with Adjuster 119 00 5/8" X 12' Line with Adjuster 121 00 5/8" X 15' Line with Adjuster 127 00 5/8" X 18' Line with Adjuster 131 Flip Line Item MADSEN’S #75221 1/2" X 8' Line with Adjuster #75000 1/2" X 8' Line Swivel Only #75222 #75002 1/2" X 10' Line Swivel Only #75223 #75224 #75225 #75241 #75242 #75243 #75244 #75245 #75011 1/2" X 12' Line Swivel Only #75015 1/2" X 15’ Line & Swivel Only #75017 1/2" X 18’ Line & Swivel Only #75003 5/8" X 8' Line Swivel Only #75001 5/8" X 10' Line Swivel Only #75005 5/8" X 12' Line Swivel Only #75016 5/8" X 15’ Line & Swivel Only #75018 5/8" X 18’ Line & Swivel Only 5500 5900 6100 6300 6800 5800 6200 6400 7000 7400 Yale Maxi Steel-Core Flip-Line MAXI FLIP-LINE is made of 3/4" Dacron rope over a steel-core. It is available with or without a Petzl rope grab adjuster and carabiner. Flip Line Item MADSEN’S 165 00 #FLI125K5/8" X 15' Line with Adjuster 170 00 #FLI126K5/8" X 18' Line with Adjuster 173 00 #FLI119K3/4" X 15' Line with Adjuster 179 00 #FLI120K3/4" X 18' Line with Adjuster 184 #FLI124K5/8" X 12' Line with Adjuster 16 00 Flip Line Item MADSEN’S 8900 00 5/8" X 15’ Line & Swivel Only 96 00 5/8" X 18’ Line & Swivel Only104 00 3/4" X 15’ Line & Swivel Only101 00 3/4" X 18’ Line & Swivel Only106 #FLI124 5/8" X 12' Line Swivel Only #FLI125 #FLI126 #FLI119 #FLI120 Call (360)736-1336 24 hours Climbing Master Page Gear Flip-Line Adjuster FLIP-LINE ADJUSTERS feature a cam-locking mechanism that easily adjusts a flip-line to any length. Unlike a prusik knot, they require only one hand to adjust. MADSEN’S Flip Line Adjuster 5000 6400 7800 #ASC103 US Std for 1/2” - 5/8” rope US Standard Adjuster Petzl Adjuster Gibbs Adjuster Locking Rope Clip #ASC104 Gibbs for 5/8” - 3/4” rope #ASC102 Petzl for 5/8” - 3/4” rope Figure 8 ROPE CLIPS are a handy alternative to carabiners for attaching your climbing line. Both have squeeze lock gates and meet ANSI standards for life support . Steel Rope Clip #CAR402 Breaks at: 5000 lbs Size: 5 1/2” X 2 1/4” Gate Opening: 3/4” Weight: 10 oz 14 00 Aluminum Rope Clip #CAR410 Breaks at: 6000 lbs Size: 2 3/4” Wide Gate Opening: 1” Weight: 6 oz 15 00 Steel Swivel Clip #CAR403 Breaks at: 5000 lbs Size: 5 1/2” X 2 3/4” Gate Opening: 3/4” Weight: 10 oz 28 00 FIGURE 8 can be used to control the descent of loads. A good item for a rescue kit. MADSEN’S Figure 8 #ASC201 Aluminum #ASC204 Steel 3000 3900 Positive Locking Carabiners A POSITIVE LOCKING CARABINER requires three motions to open their gate: push up the sleeve, twist the sleeve, and pull the gate inward. Petzl D #CAR102 Triact Breaks at: 6300 lbs Size: 4 1/2” X 2 1/2” Gate Opening: 3/4” Weight: 2.6 oz 1800 Petzl William #CAR104 Triact Breaks at: 5625 lbs Size: 4 3/4” X 3 1/4” Gate Opening: 1” Weight: 3.1 oz 1900 Aluminum Large D #CAR123 Triact Breaks at: 5850 lbs Size: 4 3/4” X 3” Gate Opening: 7/8” Weight: 3 oz 1500 Petzl Am'D #CAR101 Ball Lock Breaks at: 6300 lbs Size: 4 1/4” X 2 1/2” Gate Opening: 3/4” Weight: 2.6 oz 1800 Petzl Am'D #CAR103 Triact Breaks at: 6300 lbs Size: 4 1/4” X 2 1/2” Gate Opening: 3/4” Weight: 2.6 oz 1900 “The Pro’s Choice” 17 l Master Page Climbing Gear Tree Saddles Saddle & Belt #1371 Saddle Back View #SAD309 Two Floating Dees Small Large #SAD304 Split Suspension Waist Sizing: 30 - 34 Medium 34 - 40 40 - 44 XLarge 44 - 48 The WEAVER SADDLE #SAD304 has split suspension and is our most popular saddle. With two front D rings and two side D rings, it has four attachment points. Keeper straps prevent the front two D rings from slipping through. The leather back support is 6” high and foam filled for comfort. Sewn around the outside of the belt are five nylon loops. Each is capable of holding 15 lbs. There are also two chromeplated brass snap clips for keeping hand tools close at hand. The WEAVER SADDLE #SAD309 has two side D rings and two floating D rings, giving it four attachment points, too. Some users like the increased maneuverability and freedom of movement that a floating D ring design allows. Like the saddle above, it also has five nylon loops around the outside of the belt, and two brass snap clips. Description MADSEN’S #SAD304 Split Suspension #SAD309 Two Floating Dee Rings 15900 16900 #1371 Saddle Front View Waist Sizing: Small 28 - 32 Medium 32 - 36 Large 36 - 40 XLarge 40 - 44 #1342 Climbing Belt The BUCKINGHAM SADDLE provides superior comfort and support. The back support is 5 1/2” high and constructed of rubberized belting material lined with soft top-grain leather. The seat is constructed of 3” wide cotton webbing that is reinforced with 1 3/4” nylon that is also lined in top-grade leather. The BUCKINGHAM CLIMBING BELT has a 5" leather pad and nylon body belt, but does not have leg straps. MADSEN’S Wide Back Saddle #1371 Split Suspension Saddle #1342 Climbing Belt 13900 16500 Do you need something special or gear you don't see listed? Call us. We carry more climbing gear and equipment in our shop than what is shown. Old Style Manila Flip-Line OLD STYLE FLIP-LINE is 7/8" Manila rope with a steel-core. Because of its large diameter, some climbers still prefer this when working in trees with heavy bark. 18 Flip-Line MADSEN’S 10100 00 18' 110 #FLI129 15' #FLI130 Call (360)736-1336 24 hours Safety Master Items Page Insect Repellent Faller's Whistle The WHISTLE is brightly colored and comes with its own neck string. It gives you “sound communication” in high noise areas. INSECT REPELLENT repels mosquitoes, chiggers, ticks, deer flies, stable flies, gnats, and fleas on exposed skin. Protection lasts up to ten hours. 2 oz pump- spray bottle. Item# 61606 List 895 1-11 595 MADSEN’S 12+ This is powerful stuff - it contains 98% DEET! List 395 1-11 295 MADSEN’S 550 245 12+ Blood Stopper Bandage A BLOOD STOPPER BANDAGE is an important safety item for chain saw operators. This absorbent bandage helps control bleeding from a chain saw cut. It also helps keep a cut clean during transport. Bee Bopper II BEE BOPPER II quickly kills wasps, hornets, yellow jackets, and bees. The spray will reach a nest mass 10" in diameter when fired from a distance of 20'. #61011 It comes sealed in a plastic container and has long fabric ties for firm attachment to the injured area. List Price MADSEN’S Pouch for Two 915 1-11 599 MADSEN’S 575 4 List 35 12+ 895 539 Folding Stretcher & Stretcher Kit The STRETCHER folds for easy storage in a box or crew bus. When needed, it locks open in a rigid position. It features a sturdy frame covered with durable vinyl fabric. It is available as part of a kit or sold separately. The kit includes a case, stretcher, first aid kit, wool blanket, disposable blanket, and restraint straps. MADSEN’S PRICE #340-FSM #340-STK3 Stretcher Only Stretcher Kit w/Box 18950 43950 Call for information and prices on stretcher kits not listed. “The Pro’s Choice” 19 l Master Page Hearing Protection Plugs UltraFit Ear Plugs ULTRAFIT EAR plugs provide optimum protection and superior comfort. These ear plugs feature a triple-flange design with "swept back" flanges that are ultra-thin and flexible. They come corded and are available with or without a storage case. List 295 1-11 225 EAR plugs are made of polymer foam and are comfortable and reusable. To use, just roll each up with your thumb and finger, and insert into each ear. They expand in your ear canals and block out noise. MADSEN’S 12-99 100+ Add 50¢ for plugs with case. 195 185 Headband Ear Plugs HEADBAND EAR PLUGS enter your ear canal to protect. They will fit most small to large sized heads. They also come with a spare set of replacement ear plugs. NRR rating 27. List 755 1-5 595 6+ 5 330-3006 30 dB 20 16 2695 11 1895 95 29¢ 1-11 25¢ MADSEN’S 12-199 200+ 20¢ 16¢ We also carry EAR’s FX style shown below. They are made of soft foam and rated at 33 dB. MADSEN’S 3200 That’s only 16¢ a pair! Soft FX Style Silencio Ear Plugs SILENCIO EAR plugs are premolded of soft vinyl. Many wearers prefer these over foam type ear plugs because of ease of use. They also contain an air cushion that provides protection and comfort. These plugs last a long time and can be used over and over. They are corded to prevent loss and come with a small plastic storage box. 10 95 1795 List 360 1-11 295 MADSEN’S MADSEN'S 4+ 95 List $ Two styles are available: The muff rated at 25 dB does not offer as much protection as the one rated at 30 dB. 330-2471 25 dB Taper Fit Style Bullet Shape 50 EAR MUFFS have soft vinyl, foam-filled ear seals that completely enclose the ears, cushioning and sealing the plastic ear cups against the wearer’s head. Muffs are adjustable for different sized heads. Rating List Classic Style Cylindrical Shape Item# 330-1219 Box of 200 Ear Muffs Item# Item# 330-1001 Item# 330-1261 MADSEN’S Item# 330-321 We carry both styles shown below. Please specify when ordering. 12-99 Item# 330-9100 Call 100+ 275 245 (360)736-1336 24 hours Master FirstPage Aid First Aid Kits & Refills NORTH first aid kits come in sturdy metal containers. Each component is boxed, wrapped, and marked for easy use and replacement. The contents of kits are listed in the left-hand column below. The 24 unit kit meets federal OSHA 1910.266 requirements for small logging or cutting work sites. For larger sites, your state safety organization or employer may require more kits and additional items. For specific requirements consult the agency with authority for your job site. • Shows Kit Includes Description 10 Unit 24 Unit X #6810-0WA X #6824-0WA X X #121-055 X X #028-001 X X #020-550 X X #021-645MD X X #020-630 X X #020-374 X #020-510 X #020-640 X X #020-584 X #35-144TC X #020-445 X #10-5020 X #020-380 X #020-618 X X #83-134SS X List Price MADSEN’S PRICE 3695 6895 1195 170 225 235 325 255 295 295 165 255 160 130 445 485 435 10 unit first aid kit (complete) 4595 24 unit first aid kit (complete) 8595 CPR mask, wipes, gloves (1 ea) 1695 Curad 1" x 3" (16 ea) 230 Scissor & tweezers 295 Wound wipe (2 ea) 315 Gauze bandage 2" x 6 yd (2 ea) 435 Tri bandage 40" compress 345 Gauze compress 24" x 72" 395 Gauze compress 18" x 36" 395 Gauze pads 4" x 4" (4 ea) 225 Bandage compress 4' w/telfa 345 Adhesive tape 1/2" X 2.5 yd 215 Elastic ace bandage 2" X 5 yd 175 Wire splint 1 3/4" X 30" 595 Emergency "space" blanket 645 Nox-A-Sting (10 ea) 585 Emergency instruction chart No-Fog Lens Cleaner 495 NO-FOG LENS CLEANER is simple to use. Just squirt it on List your lenses, then wipe them clean with a soft cloth. It works MADSEN’S on all types of glasses. 95 1-11 Users also report that this helps reduce fogging when used on 12+ 350 windows in logging equipment that lacks a heater/defroster. 3 “The Pro’s Choice” 21 l Master Eye Protection Page Safety Glasses with Magnifying Inserts These SAFETY GLASSES have magnification built into the lower portion of the lens -- look ahead and the lens is clear. Magnification available: +1.0, +1.5, +2.0, +2.5, or +3.0. We also carry these with dark sun-glass style lenses: +1.5, +2.0, or +2.5. Item #CH1. Bandit Safety Glasses BANDIT safety glasses have a sporty and contemporary look. They also have adjustable temple pieces for a custom fit. The lenses are replaceable and available in clear or espresso color to reduce brightness. The clear lenses are coated with Uvex's anti-fog coating. Clear Lens #330-1620 List Espresso Lens 1195 #330-1623 MADSEN’S 1-9 995 GENESIS safety glasses feature a wrap-around lens design that offers great peripheral vision and protection. Meets military ballistic impact requirements. Available with clear or espresso colored lenses. Both the clear and espresso lens is treated with an anti-fog coating. 900 1-9 895 MADSEN’S 10+ 895 Not sure what to get? Most people prefer the lower magnifications. Genesis Safety Glasses List 795 Extra Lens 450 Safety Cord 395 10+ Radian Mesh Glasses/Goggles RADIAN mesh goggles feature fog-free eye protection. They are good for wearing in rainy conditions or in warm working conditions where perspiration fogs conventional safety glasses. They are available as glasses with black temples or with an elastic strap in a goggle style. Temples #330-675 Clear Lens Strapped #330-3200 #330-685 Espresso Lens #330-3241 List 1495 MADSEN’S 1-9 995 865 1-9 1235 MADSEN’S 10+ 895 With Mirror Lens Add $2 22 List 10+ Call 1175 (360)736-1336 24 hours Eye Master Protection Page Bug-Eye Safety Goggles Nemesis Safety Glasses NEMESIS safety glasses feature a large lens design that wraps-around your eyes for exceptional protection and visibility. The glasses also feature 99.9% UV light protection and an anti-fog coating. Available with: Clear, Smoke, or Blue lenses. BUG-EYE goggles are comfortable, durable and fog-free. No amount of rain or perspiration causes the screen to fog up. The bug-eye design also offers good side visibility. They have an adjustable elastic back strap. Clear Lens #330-235 Blue Lens #330-225 Smoke Lens Item# 330-726 #330-245 List 995 1-9 8 1825 1-5 1250 MADSEN’S MADSEN’S 10+ List 95 1150 6+ 795 Vengeance Polarized Glasses Sight Shield Mesh Goggles VENGEANCE safety glasses feature polarized lenses for comfort and protection when working in a bright and sunny conditions. They are great for equipment operation or truck driving. In fact, these stylish glasses might become your new favorite all-around sun glasses. They are available with black frames and smoke colored lenses or with brown frames and brown lenses. SIGHT SHIELD goggles have tough polycarbonate frames and adjustable back straps. They also have stainless steel wire-mesh lenses for fog free protection. We carry them in two different mesh sizes: 20 and 30. The 30 is the finest mesh. The 20 is brighter and less likely to hold water drops. Please specify when ordering. Smoke Lens #330-VG1P 20 Mesh #330-VG3P 30 Mesh Brown Lens #330-SS20 #330-SS30 List 2495 List 2495 1-9 1995 1-5 1995 MADSEN’S 10+ 1895 MADSEN’S 6+ 1795 “The Pro’s Choice” 23 l Master Ear & Head PageProtection Chain Saw Safety Cap The CHAIN SAW SAFETY CAP is a safety system. It protects your head, eyes, and ears - all with one device. The cap is made of UV stabilized ABS plastic. The hinged visor supports a mesh face-shield that provides protection from wood chips and other small flying debris. The ear muffs protect the ears plus they help keep the cap in place. The muffs and face-shield can be flipped up when not in use. We carry two styles of these safety caps, the orange version shown left and a bright-green version, not shown. List 5295 MADSEN’S Hi-Viz Orange - Item# 330-392 Tasco Hi-Viz Green - Item# 330-6030 1-3 4+ 49 47 95 95 Replacement Suspension Replacement Ear Muffs Replacement Screen with Mount 695 1995 1395 Aluminum Full Brimmed Hard Hat Replace that old worn and dented aluminum hat with one that has the look, fit, and feel of the classic full brimmed hard hat, but meets today’s ANSI Z89.1 specs. Like the old hat, it comes with a replaceable four-point suspension, but this one has a twist-adjust feature for quick and easy fit. The main difference between this and the classic hat is a new safety panel riveted inside in the top of the crown. This improves protection with little additional weight. Pictured left is a natural “silver” hat. We also stock them with a bright orange, lime green, red, or yellow finish. Item# 330-SKB 5995 Bright Orange 6695 Lime Green Replacement Suspension 6695 995 Screen Face Shield The SCREEN FACE SHIELD protects your eyes without the discomfort of wearing goggles. It hooks around the edge of most full brimmed hard hats. The screen is mounted on a hinge assembly and will tip up out of your way when not in use. 24 Natural Silver Call List 2500 1-11 2395 MADSEN’S 12+ 2295 Screen Only 1245 (360)736-1336 24 hours Master Hats & Caps Page Polyethylene Hat or Cap The V-GARD CAP has a small visor and the hat is full brimmed like the popular aluminum hard hat. Both are made of fluorescent red/orange lightweight polyethylene. This material is non-conductive and won't dent like aluminum hats. The hat is also available in several other colors. Caps come with ratchet suspension and hats with standard suspension. When ordering replacement suspension, please specify. The suspensions are interchangeable and either will work in the hat or cap. Item# 330-9360 Item# 330-8146 1595 List MADSEN’S 1-5 6+ Replacement Standard Suspension 1495 Replacement Ratchet Suspension 1395 Suspension We still have STAZ-ON SUSPENSION for Mac T hard hats. This suspension has four mounting points and easily snaps in place. List 1195 MADSEN’S 1-5 Item# 330-4231 6+ 10 95 995 995 1095 List 1595 1-5 1495 MADSEN’S 6+ 1395 Winter Helmet Liner The HELMET LINER is worn under a hard hat and provides warmth when working in cold conditions. The portion that covers the neck List 1995 and ears is knitMADSEN’S ted. It attaches to 95 the top with a 1-5 zipper for easy 6+ 1595 removal when Item# 330-282 warm. 17 Sweat-Band for Hard Hat The HARD HAT SWEAT-BAND makes wearing a hard hat on a hot day much more comfortable. The sweat-band is made of soft and absorbant terry-knit fabric, which absorbs sweat. This helps keep sweat out of your eyes when working in warm weather. The sweat-band is universal fit and will snap around most any brand of hard hat suspension system. Note: The suspension system shown is not included in the price of the sweat-band. Item# 330-622. List 695 1-5 395 MADSEN’S 6+ 350 “The Pro’s Choice” 25 l Master Leg Protection Page Labonville Cut Protective Chaps PRO CHAPS are worn outside regular work pants and are held in place by Fastex® buckles. These buckles are on the waist belt and leg straps. They are light, strong, and easy to release. Many chain saw operators favor this type of cut protection because it can be put-on and taken-off as needed. This is convenient on jobs where a saw is used occasionally. This style of cut protection is also good for use at saw mills and on other job sites where it is beneficial to be able to share a single garment among several users on other shifts or crews. Labonville Pro Chaps meet the February '95 OSHA standards for leg protection. They have 6-plys of cut protective fabric, a polyester/Kevlar® knit developed for Labonville (see the picture below). The chap's shell is made from 1000 denier Cordura nylon, which is tough and stain resistant. This is used on both the front and back, so the chaps are reversible. Ask about Labonville's Fire Reisistant Chaps that feature additional flame and ember protection. Overall Length Short - 28" Part Number #850KPS Regular - 32" #850KPR Long - 36" #850KPL XL - 40" #850KPX MADSEN'S 1-3 6495 6795 7495 7695 8595 XXL - 44" #850KPXX Add $1500 for Fire Resistant Style 4+ ea 6295 6595 7295 7495 8395 Shown is a chap we cut during a test. Note the loose fibers that have snagged the saw's chain and slowed it. Fibers also traveled into the saw's side cover, slowing the drive mechanism. 26 These chaps are made by Labonville, a USA company that has been making cut protective garment for over twenty-five years. What size chaps should you buy? Chaps are are not sized like pants, where length is determined by the length of your inseam. Chaps are sized by overall length. To determine the correct size, measure the distance from your belt to your instep. Chaps that are shorter will leave areas of the leg exposed and unprotected. Chaps that are too long can impede movement and cause tripping. When wearing boots with built-in cut protection, the chaps can be fitted to overlap as shown above. Before buying chaps, also check with your employer and the safety agency with authority on your job site for details on the safety apparel you need. If you require an item not listed, please call. When should chaps be replaced? When chaps are cut, it severs fibers in the cut resistant material. Even a small cut greatly reduces protective qualities. If your chaps are cut, they've done their job. Don't patch 'em - replace 'em. Over time chaps also get soaked with gas, oil, and sweat. This also reduces their cut protective qualities. They can be laundered, but this does not completely restore the level of protection they originally offered. Call (360)736-1336 24 hours Leg Master Protection Page Labonville Snap-In Safety Pads ORIGINAL SNAP-IN SAFETY PADS are worn on the inside of your pants. They require special pants fitted with upper snaps and knee-pockets (see below) or can be sewn into regular work jeans. View of Snap-In Kevlar®/Polyester Pad Protection on the Inside of Pants Many timber fallers prefer this type of leg protection because it allows more freedom of movement than chaps worn on the outside. With outside chaps, straps and buckles add weight and can get hung up on brush. Inside chaps are lighter and require no straps or buckles because they are held in place by the pants. Like outside chaps, SAFETY PADS are not represented as shields against damage, but as an aid to help prevent more severe damage in extreme cases. Size List MADSEN'S 1-3 4+ #SP500KPR Regular Length 4400 4095 3895 #SP500KPL Tall Length 4600 4195 3995 Shown is the front view of a pair of single snap safety pads. Price includes both chaps. Cut away side view of pad in safety pants. Note sleeve in knee area and snaps on top. Jeans for Snap-In Safety Pads Knee-sleeves and snaps have been added to these logger's jeans so they can be used with Labonville snap-in safety pads. If the pants are cut into, the knee sleeves help hold the safety pads in place to protect the legs. The snaps also make it easy to remove the pads for laundering or for swapping into another pair of jeans. What size safety pads do you wear? • Regular length is for people up to about 6'. • Tall is for long legged people or over 6'. Note: Safety pads should extend from the waist to the top of the foot. See page 52 for insulated winter pants and cool knit polyester summer pants that accept these cut resistant pads. MADSEN’S See the Madsen’s Jean listing on page 67 for sizes. 1-3 4+ 3995 3795 “The Pro’s Choice” 27 l Master Page Faller's Pants & Cold Weather Wear Faller’s Pants FALLER'S PANTS accept Labonville snap-in safety pads for chain saw cut protection and come in two types: The WINTER faller's pants are made of water repellent black nylon and insulated with 3M Thinsulate. This makes them perfect for cold and drizzly days. The SUMMER faller's pants are made of loose knit green polyester. This durable fabric is very cool in hot weather. Suspender buttons are sewn inside the waist of both types of faller's pants. Type MADSEN'S Winter #WN600P See our safety chap page for prices and information on the LABONVILLE KEVLAR safety chap pad system. Summer #SN650P Wool Faller’s Jacket The WOOL FALLER'S JACKET is made of red/ black plaid Woolrich® fabric. This fabric is 85% wool and 15% nylon. For wind and water repellency, a black nylon "yoke" covers the shoulder, chest, and upper back. The jacket features a zipper front, snapping wrist cuffs, two chest pockets, and two side slit pockets. It can be worn as a light jacket or a heavy shirt. Sizes: M to 3XL. Winter Pants Waist Sizes: 95 30, 32, 34, 36, 38, & 40 : Size 42 add $6. Summer Pants Waist Sizes: 95 30, 32, 34, 36, 38, & 40 Size 42 add $4. 72 49 Camo Fleece Jacket The CAMO FLEECE JACKET can be worn as a light jacket or a heavy shirt. It is also good for layering under a rain coat or a heavy jacket for cold weather wear. It is made of 100% polyester fleece. The garment features elastic cuffs, an adjustable elastic waistband, and zipper closures on side pockets. It also has a full-length zipper which zips to the top of the collar for a snug fit around the neck. Sizes: M to 3XL. Style# S700 List Style# CWNF01 11990 MADSEN’S 1-3 4+ 109 99 2600 1-3 2195 MADSEN’S 95 95 4+ 2XL & 3XL add $10. 28 List 2095 2XL add $4. Call (360)736-1336 24 hours Cold Weather Master Wear Page Wool Pants WOOL PANTS are great for cold-weather work or recreation. They are made from dark-green 24 oz felted fabric, which contains 75% recycled wool. These pants feature a zipper front with button closure, and six inside suspender buttons. They also have belt loops. They are available with or without cargo pockets. Both are available in waist size: 32" - 40". The inseam is 33" only. They are made in Canada. Style# 234 List 100 1-3 84 Style# 214 00 MADSEN’S 4+ BLANKET LINED JACKETS are made of durable 12 oz cotton duck fabric. This fabric is tightly woven which results in garments that are tough and snag resistant. It’s also treated with a water repellent coating that can be retreated after washing. These jackets also feature a zipper front and two snap adjustable waist tabs. A hood is optional. The SANDSTONE DETROIT JACKET has a micro-sanded and garment washed shell for softness and comfort. Other features include triple-stitched main seams, snap-adjustable waist and cuffs, and a zipper front. It also has a pocket on the left chest and two front welt pockets. This is a great coat for both work or casual wear. 95 7995 List 8000 1-3 6495 MADSEN’S 4+ 5995 Blanket Lined Jacket Style: J001 Outer Fabric: Cotton Duck Insulation: Blanket Color: Brown or Black Sizes: S -5X List Price: Up to 8000 MADSEN’S 6199 Add $5 for Talls & 3X-5X Optional hood is $1699. Sandstone Detroit Jacket Style: J97 Outer Fabric: Cotton Duck Ins: Blanket Body & Quilted Sleeves Color: Black, Gravel, Brown, or Moss Sizes: S - 5XL List Price: Up to 10000 MADSEN’S 7999 Add $5 for Big & Tall sizes. “The Pro’s Choice” 29 l Master High Visibility Page Safety Wear Safety Sweat Shirts Safety T-Shirt The SAFETY T-SHIRT features three high-visibility yellow stripes across the chest and back. Each stripe is 2” tall and 12” wide. T-Shirt fabric colors: Orange or Black. SAFETY SWEAT SHIRTS are available with or without hoods. The body is made of orange poly/cotton blend fleece with three high-visibility yellow stripes on the chest and back. MADSEN'S 4+ Sweatshirt List Crew Neck 21 95 19 2795 95 17 95 Hooded 2995 2550 Call for price of 2X, 3X, & 4X. This is an inexpensive and comfortable safety solution for job sites where visibility is important. The body is 100% cotton knit, so it is comfortable even in warm working conditions. Sweat Shirt 30 1495 M-XL 1195 MADSEN’S 2XL-4XL 1395 Ask about kid's sizes Hi-Viz T-Shirts The HOODED PULLOVER SWEAT SHIRT has an orange polyester blend fleece body with 3M reflective stripes on the chest and back. The lower portion is made of black fleece to mask soiling. Item# 230-755328. The shirt is rated ANSI class III. List List To 4995 M-2XL 3995 MADSEN’S The HI-VIZ T-SHIRT is made of moisture-wicking mesh fabric. It is available in lime-yellow or orange and has silver reflective stripes. It also has a left chest pocket. This garment meets ANSI class 2 specs. Sizes: S - 5X. Sweatshirt List Short Sleeve 1695 MADSEN'S 4+ 1295 1995 1195 Long Sleeve 2695 1850 Call for price of 2X, 3X, & 4X. Call (360)736-1336 24 hours High Visibility Master Safety Wear Page Hi-Viz Safety Vests Style# 280-SV2Z Style# 230-SV622 The HI-VIZ SAFETY VEST is made of bright-orange 100% polyester fabric. It also has two-tone reflective stripes sewn on the shoulders and waist. The vest also features a zipper closure and eight handy pockets. List 2595 1-5 1995 MADSEN’S 6+ 1895 Style# 280-39950 The HI-VIS SAFETY VEST is made of bright-orange polyester and has 2" sewn-on reflective bands. It also features a zipper front closure and a left-chest pocket for convenience. Color: Orange. Sizes: M -5XL. List 995 1-5 895 If you need pockets, the SURVEYOR’S VEST has them, including a special sealed pouch for a phone and a large zip pocket across the back. The orange vest features sewn-on reflective bands in the front and back. Sizes: M - 3X. MADSEN’S 6+ List 8500 1-3 7195 MADSEN’S 795 4+ 6495 2X-3X add $1. 1/4 Zip Safety Sweat Shirt List To 3100 List To 3795 2595 M-4XL 3195 MADSEN’S M-XL 2X-3X add $2. The 1/4 ZIP SAFETY SWEAT SHIRT is popular with loggers and timber fallers because it is similar to a 1/4 zip hickory shirt. This garment is made of orange poly/cotton blend fleece and features three high-visibility yellow stripes on the chest and back. Item# 230-18800 MADSEN’S The 1/4 ZIP SAFETY SWEAT SHIRT is available in bright orange or lime/yellow. It is made of polyester blend fleece and features a lower portion of black fleece to mask soiling. 3M reflective stripes are sewn on the chest and back. The shirt is rated ANSI class III. “The Pro’s Choice” 31 l Master High Visibility Page Rain Wear Hi-Viz Rain Wear 3 in 1 Jacket 6400 VIKING HI-VIZ 3 in 1 JACKET is a class 2 level 2 safety garment. When you order one, you get a waterproof/breathable shell that can be worn alone or with the fleece inner-jacket that is zipped into it and serves as its lining. When the shell is not needed, the fleece liner can be worn as a light jacket. It is class 2 compliant by itself. This makes for a garment system that is comfortable in nearly any weather conditions. Sizes: S - 3XL. 6330 VIKING HI-VIZ JACKET is a waterproof/breathable shell that is class 2 level 2 compliant. 6330 VIKING HI-VIZ BIB are waterproof/breathable rain pants and serve as a mate for either coat above. Jacket Need to be class 3 compliant? When a coat and bib are worn together, the suit becomes CSA class 3 compliant. MADSEN'S 4+ List Rainwear #6400J 3 in 1 Jacket 14500 10900 #6330J Jacket 8000 #6330P Pants 12695 8395 5595 11495 7595 5095 The price of sizes 2XL & 3XL are slightly higher. Please specify hi-viz yellow/green or hi-viz orange. Safety Jacket Shown left: This is the complete jacket with a removable fleece liner. The jacket also feature a removable hideaway hood. Shown right: This is the fleece liner that comes in the jacket. It can also be worn separately by itself or under another shell for layering comfort. 32 The NEESE SAFETY JACKET is a bomber style 3 in 1 jacket. It offers high-visibility in moderate to cold weather conditions. It features a waterproof hi-viz lime shell and a removable polyester fleece liner, so both the shell and liner can be worn separately, or together making three ways to wear all or parts of this jacket. The outer has Scotchlite reflective tape stripes and a cell phone/radio pocket on the upper left chest. The outer also features sideentry slash pockets and an inner breast pocket. Style# 9400. MADSEN'S 4+ Rainwear List M-2XL 8600 3XL-5XL Call 7800 6395 6995 6095 6695 (360)736-1336 24 hours Master Rain Wear Page Rain Gear Our RAIN GEAR offers the best combination of protection, durability, and comfort... all at a reasonable price. Jackets are full cut across the chest and back for extra arm mobility. This is important for swinging an axe or other upper-body activity. They also feature comfortable stand-up collars and stormfronts. The full cut bibbed pants have heavy-duty elastic suspenders and tough non-corrosive nylon hardware. Seams are stitched and sealed with heat tape. If you are BIG or TALL, you’ve probably had difficulty finding rain wear. We stock sizes up to 5XL in both Neoprene and Polyurethane coated nylon styles. If you need something bigger, up to 7XL is available, and for special needs, we can have rain wear custom made. If you need rain wear, we can help you. Description Piece MADSEN’S PRICE List Price 1-3 ea Neoprene on Nylon NEOPRENE coated nylon is the traditional logger's rain gear we've carried for years. It is cut from a roomy pattern to allow arm and body movement. Better coatings and fabric allow it to be lighter and more flexible than the old neoprene gear, but it is still tough and resistant to gas and oil. It is available in green only. 4+ ea Color: Green. Sizes: S - XL, 2X add $4., 3X add $8., 4X add $12. Rain Coat #260-200 Bibbed Pants #260-250 Rain Hood #260-275 5195 5195 1095 6700 6700 1390 4795 4795 995 Polyurethane on Nylon POLYURETHANE coated nylon rain gear is light and flexible, even when cold. It is cut from a roomy pattern similar to the gear above. The combination makes this gear easy to move in and comfortable. Color: Green Sizes: S - 2XL, for 3XL - 4XL add $3. Rain Coat #260-600JG Bibbed Pants #260-601TG Rain Hood Water Repellent #260-600HG 3495 3495 1195 4500 4500 1400 WATER REPELLENT is made by Sno-Seal and restores water-repellency to outerwear through the use of advanced polymers. It will not change how a fabric looks and is scent free when dry. It contains a fungicide to control odors and protect from mold or mildew. Can size is 10.5 ounces. Item# 310-1336. 3195 3195 1095 List 800 1-5 695 MADSEN’S 6+ 650 “The Pro’s Choice” 33 l Master Rain Wear Page Black Rain Gear TUFF BLACK RAIN GEAR is made of heavy-duty 420 denier nylon fabric coated with 8 oz polyurethane waterproofing. The heavy-duty nylon is nearly impossible to tear and the polyurethane coating resists abrasion and punctures. Jackets feature a storm front with plated brass hardware. The overalls have a storm fly and heavy elastic suspenders. Both garments have sealed seams. If you are looking for tough rain gear, this is it! Piece List Price MADSEN’S PRICE 1-3 ea 4+ ea Polyurethane on Nylon Color: Black. Sizes: M - 2XL, 3X - 4X add $6. Rain Coat #251SJ Bibbed Pants #251BTF Rain Hood #251HO 7500 7500 1900 6495 6495 1295 6195 6195 1195 Breathable Gore-Tex® Rain Gear GORE-TEX rain gear outperforms regular rain gear because it holds out rain while allowing perspiration to escape. With this rain gear, you won’t finish the day drenched in sweat like you do when working in conventional rain gear. This rain gear also outperforms most GoreTex rain wear sold at sporting goods stores. It is made of industrial Gore-Tex fabric, which is heavier and more durable. Piece Gore-Tex® List Price MADSEN’S PRICE 1-3 ea Color: Green or Black. Sizes: M - XL, for XXL add $16. Rain Coat #260-900 Bibbed Pants #260-950 Rain Hood 34 21200 21800 5500 Call 4+ ea 16495 16495 4295 15795 15795 3995 (360)736-1336 24 hours Master Rain Wear Page l l Thor Professional Rainwear THOR PROFESIONAL RAINWEAR is made of tough 300 denier rip-stop polyester canvas that is waterproof and breathable. The jacket features a storm front and European-style zipper. It also includes a snap-on hood. The bibs feature elastic suspenders with fast-snap buckles. The bibs also have handy cargo-pockets and zip-to-knee side-zippers for easy on and off over work boots. Piece List Price MADSEN’S PRICE 1-3 ea 4+ ea Breathable Polyester Canvas Color: Black. Sizes: M - XL, 2XL & 3XL add $7. Rain Coat #3910JB Bibbed Pants #3910PB 13000 12200 9395 8595 8495 7795 PVC Rain Gear PVC RAIN GEAR is made of 50-mm polyester backed PVC. Both the coat and pants are waterproof and wind resistant. All seams are electrically welded and major seams are sewn and welded. This rain gear is value priced, yet very durable. Color: Green. Mayne Coat Style: 101076 Sizes: S - 4XL Mayne Bibs Style: 101075 Sizes: S - 4XL Coat or Bibs List Price: Up to 6000 MADSEN’S 3999 Add $3 for Big sizes. PVC COAT has a storm-channel placket with snap-closures. It also has three pockets, neoprene inner sleeve cuffs, and reinforced elbows. A detachable hood is included. PVC BIBS bibs have adjustable suspenders with snapclosures. They also have an inside bib pocket with a zipper-closure. The seat is reinforced and the knee area is reinforced with a chap-style double-front. “The Pro’s Choice” 35 Master Rain Wear Page Tin Wear FILSON tin wear is popular with loggers and others who do hard physical work in rainy weather. The wax treatment “repels” water, yet the canvas fabric breathes to vent perspiration. This helps keep the wearer from becoming drenched in sweat, a common discomfort with conventional “water proof” rain gear. Also, its cotton canvas construction makes it some of our most durable wet weather wear. The DOUBLE LOGGER COAT is constructed with two layers of fabric that extend over the shoulders and down each arm. The coat also features a comfortable full cut for easier arm movement. The front closure, flaps, and cuffs are reinforced. This is an extremely durable rain coat that will hold up in challenging work conditions. TIN PANTS are available in two styles: Double tin pants have two layers of fabric that extend from the waist to below each knee for extra durability. They are available in tan or green. Single tin pants have only one layer and are available in tan only. Both tin pants have four deep pockets with storm flaps on the two rear ones. They are also bar tacked at all strain points and riveted steel buttons are used on the fly and suspender anchors. Type Tin Coat - Double: M to 2XL Tin Pants - Double: 30" to 44" Waist Tin Pants - Single: 30" to 44" Waist List MADSEN'S 21000 Call for Price 18200 17000 Call for Price Call for Price Extra tins of wax finish for tin wear are $895 ea. “Packer” Hats The TIN PACKER HAT is made of fabric similar to what is used to make tin pants. It offers excellent protection from all types of weather, and like the tin pants, it is extremely durable. Item #60015-TN. The SHELTER CLOTH PACKER HAT is cut and shaped from the same pattern as the Tin Packer Hat, but made with shelter cloth, a finer woven oil finished fabric. Both hats are the same price, so please specify size and type when ordering. Item #60017-OT. Filson Hats Hat Size Head Measure 36 S 6 3/4 - 6 7/8 211/8 - 211/2 ” M 7- 71/8 217/8 - 221/4 ” L 71/4 - 7 3/8 22 /8 - 23” 5 XL 71/2 - 75/8 231/2 - 237/8 ” XXL 7 3/4 - 7 7/8 241/4 - 255/8” Call List 5500 MADSEN’S Call for Price (360)736-1336 24 hours Master Caps & Page Hats Madsen’s Caps MADSEN’S CAPS are made of brushed cotton twill and come in several colors. Most caps have a dark bill which helps hide dirty finger prints. All caps also features a high-stitch-count embroidery on the crown. If you want a ball cap that looks like something a timber faller would wear, this is it. Madsen’s caps are priced below cost as a way of saying “Thanks” for your business -- and for advertising for us. When you recommend Madsen's to your friends and co-workers, we appreciate it. MADSEN’S Twill Cap Wool Crusher Hat This is a genuine Effanem wool crusher hat. It is made in the USA of 100% wool. In the days before hard hats, this was commonly worn by woodsmen in the Northwest. Old logging photos show these on countless logger’s and saw men. Even though hard hats have replaced this as a work hat, it remains a favorite of outdoorsmen everywhere. 795 List 2595 1-5 2095 MADSEN’S 6+ 1895 Wool Crushers are available in: S - XL Colors are: Red, Flame Orange, & Green Knit Caps Item# A18 CARHARTT KNIT stocking caps are made of jersey knit acrylic. While not as warm as wool, they don’t have the scratchy feel. The caps will stretch to fit any size head. Colors are: Black, Charcoal, or Navy. CARHARTT HELMET-LINER MASK is made of 92% polyester and 8% spandex. It offers full face protection that extends below the neckline. The mask portion can easily be pulled down when needed. Item# A164 Item# A267 Type #A18 Size List 1000 Acrylic #A164 Billed Acrylic #A267 MADSEN'S Full Face 1200 2000 799 999 1699 “The Pro’s Choice” 37 l Master Cold Weather Page Wear Heavyweight Wool Underwear HEAVYWEIGHT WOOL UNDERWEAR is standard equipment for winter work in Alaska and the Pacific Northwest. Its rib knit weave is absorbent and warm, even when wet. It also has flat locked seams for extra wear. The union suit design has a trap door in the seat, a button front, and snug fitting cuffs. Made in Canada. Size List #1300 Union Suit S - XL MADSEN'S 9500 #1300 Union Suit 2XL 11000 Ask about quantity prices. Traditional Red Cotton Union Suit 7995 9495 List To 2800 MADSEN’S 2195 The RED UNION SUIT is made of 100% rib-knit cotton. This smooth knit makes it warm and comfortable to wear. It also features a button front placket and reinforced stitching on all seams. And yes, it still has a vertical seat flap for... you know. Sizes: S - 3XL & LT - 2XT. Style# 865US. Add $2 for 3XL & Tall sizes. Wool Blend Underwear WOOL BLEND THERMAL underwear is a two layer knit blend. The outer layer is 70% polyester and 30% merino wool. The inner layer is 100% Hydropur. This gives you the comfort of Hydropur next to your skin, the warmth of wool, and the wearability of polyester. Sizes of tops or bottoms: S to 3XL Color: Grey. Style# 975 DR/LS. Top or Bottom per piece: List Price MADSEN’S 2500 1695 Add $2 for Big & Tall sizes. 38 Call (360)736-1336 24 hours Cold Weather Master Wear Page Ice-Tex HydroPur Underwear ICE-TEX HYDROPUR UNDERWEAR is dual-faced. Against your skin is fleeced HydroPur. HydroPur fiber has the highest rate of absorbancy and highest rate of evaporation of any performance fiber on the market. Silver ions imbedded in its fiber during the polymer stage also give the garment a level of odor control. outside is combed cotton. Tops are Style# 286LS. Bottoms are Style# 286DR. Top or Bottom per piece List Price 1800 MADSEN’S 1295 Add $1 for Big Sizes Work-Dry Underwear WORK-DRY THERMAL UNDERWEAR is made of 5.5 oz. polypropylene rib-knit, so it is lightweight, but still warm. Polypropylene wicks moisture, keeping you warm and dry. This underwear also features rib cuffs on the top and an elastic waistband on the bottoms. Tops are Style# 21LS. Bottoms are Style# 21DR. Note: Polypropylene underwear is not a good choice if you are going to be welding while wearing it or around anything that may cause it to melt. Top or Bottom per piece List Price 1600 MADSEN’S 1195 Add $1 for Bigs & Talls. Max Cold Underwear MAXIMUM WEIGHT THERMAL UNDERWEAR is made of 9.1 oz. waffle-knit fabric and is rated for extremely cold temperatures. The waffle-knit is a blend of 50% cotton and 50% polyester. This traps a layer of air and body heat air near your skin, insulating you from the cold. Style# 822 DR/LS. This is high-quality well constructed underwear. Its top features a rib-knit neck and cuffs. The bottom has an elastic waist band. Top or Bottom per piece List Price 1400 MADSEN’S 895 Add $2 for Bigs & Talls. Additional savings are available for purchases of four or more. Please call for more information. “The Pro’s Choice” 39 l Master Page Work Pants Bibs & Coveralls Brown Duck Bibs T h e s e B I B S a re m a d e o f Carhartt's famous brown duck canvas and are not insulated or lined. Their many features include roomy pockets, a high back, elastic suspenders, and triple-stitched main seams. The knee and upper leg have an extra layer of fabric for protection and wear. Ask us about knee pads that can be placed behind this fabric. DENIM BIBS have a high back and adjustable suspenders. They also have a double compartment bib pocket, roomy rear pockets, and a zipper fly. Stress points are riveted and bar tacked. These bibs are well made and long wearing. They are cut from a roomy pattern for comfort and easy movement when working. We carry two styles of unlined coveralls: One is made from cotton twill, the other from a cotton/poly blend. The cotton coveralls are comfortable and the best choice if you do any welding. The style made from blue cotton/polyester blend is what our techs wear at Madsen's. These wash well, wear well, and look good, even when they are slightly soiled. They also have leg zippers, which makes it easy to get them over your boots. Style: R01 Outer Fabric: Cotton Duck Color: Brown Sizes: Waist 32" - 42" Legs: 30", 32", or 34" List Price: 7500 Style: 273.41 Outer Fabric: Blue Denim Sizes: Waist 34" - 48" Lengths: 30", 32", & 34" legs Fabric: 7.5 Poly/Cotton or 10.5 oz Cotton Twill Sizes: S - 2XL Lengths: Regular List Price: 4695 MADSEN’S 40 Mechanic's Coveralls Denim Bibs 59 99 MADSEN’S 2895 Add $3 for Sizes 48”. Buy 4+ and save $1 each. MADSEN’S 3595 Buy 4+ and save $3 each. Call (360)736-1336 24 hours Master Work Pants Page Double Duck Dungarees DOUBLE DUCK DUNGAREES are made from the same cotton duck fabric used in Carhartt coats and overalls. This canvas-like material is tough, yet comfortable to wear. These pants are made even more durable by the extra layer of fabric around the knees where pants are often damaged. Colors: Brown, Black, or Moss. 5500 List Price MADSEN’S PRICE Unwashed (#B01) 4499 Brown Duck Inventory: 28 x 30 28 x 32 29 x 30 29 x 32 30 x 30 30 x 32 31 x 30 31 x 32 31 x 34 32 x 30 32 x 32 32 x 34 33 x 30 33 x 32 33 x 34 34 x 30 34 x 32 34 x 34 36 x 30 36 x 32 36 x 34 38 x 30 38 x 32 38 x 34 40 x 32 42 x 32 These don't have suspender buttons. See page 54 for add-on buttons. Double Front Logger’s Jeans DOUBLE FRONT LOGGER’S JEANS are made of durable 15 oz cotton denim. Features include a comfortable full cut, a side tool pocket, two full size back pockets, and triple stitched seams. The unwashed version is our best seller and it comes with six riveted suspender buttons. We also carry a prewashed version, which do not have suspender buttons. List Price 4800 MADSEN’S PRICE Unwashed (#B07) Prewashed (#B73) 3999 3999 Double Front Size Inventory: 30 x 30 30 x 32 31 x 30 31 x 32 31 x 34 32 x 30 32 x 32 32 x 34 32 x 36 33 x 30 33 x 32 33 x 34 33 x 36 34 x 30 34 x 32 34 x 34 34 x 36 36 x 30 36 x 32 36 x 34 36 x 36 38 x 30 38 x 32 38 x 34 38 x 36 40 x 30 40 x 32 40 x 34 42 x 30 42 x 32 42 x 34 44 x 30 44 x 32 Double front jeans offer longer wear in the area around the knees, but do not offer chain saw cut protection. Soft Knees for Double Front Pants SOFT KNEES are made of high-density foam and slip in between the layers of fabric on most double front pants. This foam helps cushion knees on hard or rough surfaces and helps protect from heat or cold. These pads are less cumbersome than strap-on pads and are always there once they are installed in pants. Note: This foam is not chain saw cut protection. Item# 280-416. List 1900 1-5 1795 MADSEN’S 6+ 1595 “The Pro’s Choice” 41 l MasterPants Work Page Logger’s Jeans See page #51 for information on a version of these jeans that are modified to accept Labonville Snap-In safety pads. MADSEN'S LOGGER'S Madsen’s Logger’s Jeans Size Inventory: JEANS have the features 30 x 30 30 x 32 loggers and timber fallers 32 x 29 32 x 30 32 x 32 32 x 34 32 x 36 want. They are made of 33 x 29 33 x 30 33 x 32 33 x 34 durable 14.75 oz cotton 34 x 29 34 x 30 34 x 32 34 x 34 34 x 36 denim and cut from a gen- 36 x 29 36 x 30 36 x 32 36 x 34 36 x 36 38 x 29 38 x 30 38 x 32 38 x 34 erous pattern. They have 40 x 29 40 x 30 40 x 32 40 x 34 six riveted suspender but- 42 x 29 42 x 30 42 x 32 tons, triple stitched side 44 x 30 44 x 32 seams, and bar tack rein- 46 x 30 46 x 32 forcements. The hardware 48 x 30 48 x 32 includes a brass zipper, rivets on stress points, and a Type MADSEN'S riveted button on the waist- 1-3 ea 4+ ea band closure. The back 95 2595 pockets are sized extra deep #1983M Single Front so 10" and 12" faller ’s 95 2995 wedges won't fall out. They #1993M Double Front also have a watch pocket Add $3 Waist Size 46" & 48". and a side tool pocket for your bar wrench or cell phone Best of all, these quality work pants are value priced. 28 32 Logger's Jeans PRISON BLUES LOGGER'S JEANS are actually made by inmates at a penitentiary in Pendleton, Oregon. They are cut from a traditional logger's pattern and made of 100% 14.75 oz cotton denim for durability and comfort. They feature a zipper front, button closure, and suspender buttons. Their brand slogan is: "Made on the Inside to be Worn on the Outside." 30 x 30 31 x 30 32 x 30 33 x 30 34 x 30 36 x 30 38 x 30 40 x 30 42 x 30 44 x 30 46 x 30 Sizes in Stock: 30 x 32 31 x 32 32 x 32 32 x 34 33 x 32 33 x 34 34 x 32 34 x 34 34 x 36 36 x 32 36 x 34 34 x 36 38 x 32 38 x 34 40 x 32 42 x 32 44 x 32 46 x 32 Note: Single Front Black Type MADSEN'S Jeans are available in waist 1-3 ea 4+ ea sizes 30" to 44" and in leg 95 lengths of 30", 32", and 34". #1201111 Single Front 2595 #1211111 Double Front 27 2995 2895 2795 #1201212SF Black 2695 Big sizes are slightly higher. 42 Call (360)736-1336 24 hours Master Work Jeans Page Traditional Logger's Jeans KEY LOGGER'S JEANS are "dungaree" cut to be roomy and easy to work in. In fact, if you remember the old LEE logger's jean, the cut is very similar. They are made of durable 100% cotton denim and have heavy duty suspender buttons, a zipper fly, full sized pockets, and rivets on stress points. Note: Double Front Jeans are available in waist sizes 30" to 42" and in leg lengths of 30" and 32". Sizes in Stock for Single Front Blue Jean: 30 x 30 30 x 32 32 x 30 32 x 32 32 x 34 34 x 29 34 x 30 34 x 32 34 x 34 34 x 36 36 x 29 36 x 30 36 x 32 36 x 34 36 x 36 38 x 29 38 x 30 38 x 32 38 x 34 38 x 36 40 x 29 40 x 30 40 x 32 40 x 34 42 x 30 42 x 32 44 x 30 44 x 32 46 x 30 46 x 32 48 x 30 48 x 32 50 x 30 50 x 32 52 x 30 52 x 32 MADSEN'S 1-3 ea 4+ ea Type #446.41 Single Front #447.41 Double Front Not sure of the size? Give a gift certificate. 2095 2495 Add $3 Waist Size 44" & 52". 1895 2295 Prewashed Double Front Logger's Jeans PREWASHED DOUBLE FRONT LOGGER’S JEANS are made of 14.75 oz cotton denim. They feature a brass zipper, button closure on the waist band, a hammer loop, suspender buttons, and a side tool pocket that is large enough to hold a small cell phone. Style# 48011.45. These good-looking jeans can be worn for casual wear, yet are durable enough for work. Their prewashed finish gives them the look and feel of old favorites right from the start. List 3300 1-3 2695 MADSEN’S Double Front Inventory: 30 x 30 30 x 32 32 x 30 32 x 32 32 x 34 34 x 30 34 x 32 34 x 34 36 x 30 36 x 32 36 x 34 38 x 30 38 x 32 38 x 34 40 x 30 40 x 32 40 x 34 42 x 30 42 x 32 44 x 30 44 x 32 46 x 32 48 x 32 4+ 2495 Add $2 for Waist Sizes 44"-48". “The Pro’s Choice” 43 l MasterPants Work Page Relaxed Fit Jeans RELAXED FIT JEANS are made of 15 oz denim, yet have a soft feel and comfortable fit. They are cut from a pattern that offers extra space in the seat and thighs. The also have straight legs. They come garment washed, which means they are processed in special machines after they are sewn to give them the look and feel of your favorite jeans on the first day you wear them. Style# B460-DPS. Sizes in Stock: 32 x 30 32 x 32 34 x 30 34 x 32 34 x 34 35 x 30 35 x 32 36 x 30 36 x 32 36 x 34 38 x 30 38 x 32 38 x 34 40 x 30 40 x 32 42 x 32 List Price 4000 MADSEN’S 2999 Not sure of the size? Give a gift certificate. Traditional Fit Jeans TRADITIONAL FIT JEANS are cut from a pattern where the waist sits slightly below the natural waist. The seat and thighs are cut slim. Leg openings easily fit over boots. These are a good choice for people with a slim build, who don't like a "relaxed fit" cut. Style# B480-DPS. 32 x 30 33 x 30 34 x 30 36 x 30 38 x 30 40 x 30 42 x 30 Sizes in Stock: 32 x 32 32 x 34 33 x 32 33 x 34 34 x 32 34 x 34 34 x 36 36 x 32 36 x 34 34 x 36 38 x 32 38 x 34 40 x 32 42 x 32 List Price 4000 MADSEN’S 2999 44 Call (360)736-1336 24 hours Work Jackets Master & Shirts Page Hickory Shirt BEN'S HICKORY SHIRT is made of 50% cotton/50% polyester blend for comfort, long wear, and minimal shrinkage. Choose from a long sleeve or short sleeve version which are both cut from the same roomy pattern. They also feature a 1/2 zip front, two chest pockets, and a pencil slot built into the left pocket. Made in the the USA. MADSEN'S 1-3 ea 4+ ea Type #176 Short Sleeve #276 Long Sleeve Short Sleeve Version 2695 2995 2495 2795 Black Denim Pants BEN'S BLACK LOGGER’S PANTS are an American classic. Made of 10.5 oz. fabric that is 50% cotton and 50% polyester, these fullcut pants are popular with logger’s, timber fallers, and truck drivers. Their features include: double stitched seams, a metal zipper fly, a snap closure on the waistband, and six suspender buttons. Made in the USA. Style #694. Sizes: 32 x 30 32 x 32 33 x 30 33 x 32 34 x 30 34 x 32 36 x 30 36 x 32 38 x 30 38 x 32 40 x 30 40 x 32 42 x 30 42 x 32 List 3900 1-3 3395 MADSEN’S 4+ Fabric Cement TEAR MENDER is great for fixing work clothes. It permanently binds fabric, canvas, leather, or any material it can penetrate, so it’s perfect for patching jeans, pack sacks, tents, and upholstery. It dries in minutes and is waterproof. Bottle size is 6 ounces. Item# 280-276. List 1095 1-5 995 MADSEN’S 6+ 895 3195 Customers report patches stay flexible and attached even after garments are washed and dried many times. “The Pro’s Choice” 45 l Master Page Work Jackets Work Jacket The WORK JACKET features a brush-finished cotton outer shell that is treated with Teflon fabric protector. This makes the garment water and stain resistant. It also features a fleece lined body, fold flat collar, snap cuffs, gussets under-the-arm, pleated elbows, and an inside chestpocket for extra storage. Style: 301 Outer Fabric: Brushed 100% Cotton Ins: Fleece Lining Color: Bark Sizes: M - 4XL List Price: 6900 MADSEN’S 5795 Add $6 for Big & Tall sizes. Lined Shirt/Jac The LINED SHIRT can be worn as a heavy shirt or light jacket. It features a brushed cotton outer shell that is treated with Teflon fabric protector. It also features a fleece lined body, fleece lined side-seam hand-warmer pockets, and black taffeta sleeve lining for warmth and easy movement. It also has two exterior chest-pockets for storage. Style: 540 Outer Fabric: Brushed 100% Cotton Ins: Fleece Lining Color: Bark or Black Sizes: M - 4XL List Price: 4400 MADSEN’S 3795 Add $4 for Big & Tall sizes. Hooded Sweatshirt The HOODED SWEATSHIRT is made of cotton/polyester blend fleece with Carhartt's Rain Defender water-repellant treatment. This helps keep you dry in passing light showers. For cold and wet weather comfort, it is also good for layering under a raincoat. Its features include: a full-length brass zipper, two front hand-warmer pockets, and an inside pocket with zip-closure. It also has an elastic waistband and elastic cuffs. The attached hood is jersey-lined and has a draw-string closure. 46 Style: 100614 Outer Fabric: Cotton/Polyester blend Color: Black & Navy Sizes: M - 4XL List Price: 5900 MADSEN’S 4999 Add $5 for Big & Tall sizes. Call (360)736-1336 24 hours Master Page Work Shirts Heavy Flannel Shirt This flannel shirt can be worn for work or casual dress. It looks good with a nice pair of jeans, but is also durable enough to hold up as a work shirt. It is made of 100% cotton flannel and features two chest pockets and a button front. It comes in a variety of colors. . Sizes: M - 4XL We also carry Talls up to 3XLT List 4800 Each 3999 MADSEN’S Tall Sizes and 2XL to 4XL add $3. Heavy Flannel Shirt The heavy 9 oz FLANNEL SHIRT has long sleeves and tails. The 100% cotton plaid is warm and comes in four types of buffalo plaid: red/black, green/black blue/black, and white/black. This flannel shirt is full-cut for comfort and has a button front. It comes with two pockets with button closures. Style# 121. Sizes in stock: M - 5XL. We also carry Talls up to 5XLT. List 3700 1-3 3095 MADSEN’S 4+ 2795 Tall Sizes and 2XL to 5XL add $5. Made In USA Polo Shirt A CARHARTT POLO SHIRT is made of 65% polyester/35% cotton 6 oz knit fabric. This color-fast fabric resists fading, but releases stains, so the shirt looks good even after much wear and many washings. It also features a three-button front, a ribknit collar, and a square-bottom. Colors: Black, Gray, Moss Green & Navy Blue. Style# K570. List To 3400 A polo is as comfortable as a MADSEN’S T-shirt, but offers a dressier look. it 99 is also great for layering under a Each flannel shirt or sweat shirt. Bigs add $3. Talls add $3. 24 “The Pro’s Choice” 47 l Master Page Logger’s Shirts Hickory Shirts HICKORY SHIRTS are available with either a half-zip or button front. A short-sleeve half-zip version is also available. Hickory shirts are worn by loggers and timber fallers everywhere because they are comfortable to work in and very durable. They are made of 100% striped cotton twill, which is really a medium-weight denim. This tough fabric lasts and lasts. It is also absorbent, so sweating is no problem. Hickory shirts are cut from a roomy pattern, so you never bind up even when swinging an axe. They also have large button down pockets for carrying needed items. Button Hickory Long Sleeve Zipper & Button Front Hickory Shirts: Regular Sizes: . . . . . . . . . Small, Medium, Large, Extra Large Big Sizes: . . . . . . . . . . . 2XLarge, 3XLarge, 4XLarge, 5XLarge Tall Sizes: . . . . . . . . . . . Med Tall, Large Tall, XLTall, 2XL Tall Big & Tall: . . . . . . . . . . . . . . . . . . . 3XL Tall, 4XL Tall, 5XL Tall Shown left: We now offer a zipper front hickory with short hem finished sleeves. This is for warm weather work when you want more than a T-shirt, but a long sleeve hickory is too much. Short-Sleeve Half-Zip Hickory See page #57 for kid sized hickory shirts. MADSEN’S 1-3 4+ 2795 2595 MT to XLT add $3. 2XL & 3XL add $3. 2XLT to 5XLT add $8. Hickory Shirt This HICKORY SHIRT is made of durable 9.5 oz. hickory stripe denim and has tripple stitched main seams. It also features an 8" half-zip front and two chest pockets with flap covers and button closures. It also has two-button adjustable cuffs with extended plackets. Sizes in stock: S-4XL and LT-3XT. Style# 100092 48 Call List 3600 MADSEN’S Each 2999 Bigs add $3. Talls add $3. (360)736-1336 24 hours MasterShirts Page Hickory Shirts HICKORY SHIRTS are are made of 100% striped cotton twill. This tough fabric is absorbent, so its comfortable on a day filled with hard work and perspiration. Hickory shirts are cut from a roomy pattern, so they have plenty of room for free movement. They also have two large button down pockets for carrying what you need. Sizes: S - 4XLT. List Type #573.47 Zipper Front #575.47 Button Front MADSEN'S 2495 2495 3300 3300 Big & Tall sizes add $3. Zipper Hickory Button Hickory Pocket T-Shirts POCKET T-SHIRTS are made of heavy 6.75 oz 100% cotton knit fabric. They feature a left chest pocket, taped neck and shoulder seams, and hemmed sleeves and bottom. The Henley style shirt also features a three-button placket, giving the shirt a dressier look. Both shirts can be worn alone or used for layering under a work shirt. Colors: Black, Green, Navy, or Grey. Sizes: S to 4X. List Type #820 T-Shirt #825 Henley MADSEN'S 1200 1500 895 995 Big & Tall sizes add $1. Pocket T Shirt Pocket Henley “The Pro’s Choice” 49 l Master TShirts Page T-Shirt CARHARTT T-SHIRTS are good for warm weather work or casual wear. Many are also worn underneath another shirt for layering in cold working conditions. They are made of heavy-duty 6.75 oz cotton rib knit. This durable fabric is comfortable and long-wearing. It also resists shrinkage, giving a Carhartt T-shirt a true-to-size fit. Other features include side seam construction, which minimizes twisting. It also has a left chest pocket where a Carhartt logo is proudly displayed. They come in a wide assortment of colors and Madsen’s has a complete inventory. We also have this popular T-shirt in a camo version imprinted with the Realtree pattern. Sizes in stock: S - 4XL including Talls in most sizes. Short-Sleeve Classic T-Shirt Long-Sleeve Classic T-Shirt Short-Sleeve Henley T-Shirt Short-Sleeve Camo T-Shirt Long-Sleeve Henley T-Shirt Colors: Classic Short-Sleeve T-Shirt colors are: Black, Hunter Green, Army Green, Desert, Ash, Red, Carhartt Brown, Dark Brown, Heather Grey, Navy Blue, Orange, Port, Bluestone, and Stream Blue. Type Classic Long-Sleeve T Shirt colors are: Navy Blue, Black, Hunter Green, Dark Brown, Heather Grey, Port, and Bluestone. #K126 Long-Sleeve Camo T-Shirt color is: Realtree pattern. 50 List Classic T- Shirts: #K87 Short-Sleeve Camo T- Shirts: #K287 Short-Sleeve Henley T- Shirts: MADSEN'S 1800 2300 1499 1899 3000 1999 2300 2800 1699 2299 Henley Short-Sleeve T-Shirt: Navy, Hunter Green, Black, Port, Bllue Stone, Heather Gray, and Dark Brown. #K84 Short-Sleeve Henley Long Sleeve T-Shirt: Hunter Green, Black, Blue Stone, Navy Blue, Heather Gray, Port, and Dark Brown. Tall and big sizes are slightly higher. Colors are: Navy, #K128 Long-Sleeve Call (360)736-1336 24 hours MasterShirts Page Force T-Shirt FORCE T-SHIRTS are made of 5.75 oz. jersey knit. This fabric is a blend of 65% cotton and 35% polyester so it wicks away sweat and is also stain resistant. The shirt features raglan style sleeves for increased range of motion, a tagless neck label, and smooth flatlock seams for comfort. It also has a left chest pocket. Style# 100410. Colors: Black, Heather Gray, Moss, and Navy. T-Shirt MADSEN'S T-SHIRTS have a large Madsen's Pro's Choice logo on both the front and back. They are made of 100% cotton-knit and are comfortable for both work or casual wear. This is the same T shirt worn by competitors like Branden Sirguy at logging shows. See his pic on our web site at: www.madsens1.com. 2400 List MADSEN’S Each 1999 Bigs add $3. Talls add $3. MADSEN’S 1-3 4+ 1995 1795 Tall Sizes & 2XL to 4XL add $4. Half-Zip Sweatshirt HALF-ZIP SWEATSHIRTS are full-cut for comfort and look great when worn over a matching T-shirt. You’ll want one of these sweatshirts for work, sports, or casual wear. Madsen’s Logo Sweatshirt Type MADSEN'S Plain Grey, Blue, or Green: M to XL Plain Grey, Blue, or Green: 2XL Black or Oxford w/logo: M to XL The shirt shown left has a Madsen’s logo sewn on the chest. 21 Black or Oxford w/logo: 2XL, 3XL 95 2395 2995 3095 Buy 4+ and save $2 each. “The Pro’s Choice” 51 l Master Page Women's Wear Women's Boot Socks WOMEN'S BOOT SOCKS are similar to a man's boot sock but are sized for a woman's foot. They are knit from wool blend yarn made of 65% acrylic, 20% merino wool, 13% nylon, and 2% spandex. The ultra-soft merino wool adds warmth and comfort. This heavyweight sock also features a reinforced arch for added fit and support. It also has a flat toe seam for toe comfort and fully-cushioned leg and foot. Size: M. Style# 8548. List 900 1-5 pr 575 MADSEN’S 6+ pr 555 Women’s Jacket The WOMEN’S JACKET is great for work or casual wear. It is made from 12 oz. cotton sandstone duck fabric, which is soft yet durable. Inside the body is sherpa lining and in the sleeves, quilted nylon lining for warmth and easy movement. The jacket also features an attached three-piece hood, two slash pockets in the front, and two inside pockets. Colors: Purple, Rose, Dawn, and Blue. Sizes: S 2XL. Style# WJ141. 11000 List MADSEN’S 8999 Women’s Jeans The WOMEN’S ORIGINAL FIT JEANS are made for a woman's shape. In the hips and thigh area, they fit a woman's curves. They finish with leg openings that are bootcut. They are made of 10.5 oz denim that is 77% cotton. Sizes: 4-18. Style# 100649. The WOMEN’S FLANNEL LINED JEANS have the warmth and comfort of flannel pajamas. The jeans are a fivepocket style and are relaxed fit through the hips and thighs. They finish with straight legs. The waistband prevents gapping in back. Sizes: 4-18. Style# 100648. List 6000 List MADSEN’S MADSEN’S 3499 4499 52 4800 Call (360)736-1336 24 hours Children's Master Wear Page l Kid’s Bib Overalls K I D ’ S B I B S a re m a d e o f washed brown duck fabric, a softened version of the durable fabric used to make adult work wear. Features include adjustable shoulder straps and two quarter top pockets. If your child likes to play with toy dump trucks on a big pile of dirt, your little contractor is going to love these bibs. List Size Infant: 6, 12, 18, 24 Month Size Toddler: 2T, 3T, 4T 3200 Color: Carhartt Brown Size List Month Size Toddler: 2T, 3T, 4T 2000 2200 Child: 5, 6, 7 2200 Youth: S- XL 2299 2499 2999 MADSEN'S 2000 Infant: 6, 12, 18 1795 1795 1995 1995 Buy four or more and save $1 per piece. Kid's Hickory Shirts Got a little logger at home? Now he or she can wear a hickory shirt just like Dad or Grandpa. This durable shirt is a miniature version of the classic zipper front hickory. If your little logger wants something more feminine looking, we also carry them with pink hickory stripes. 3000 3600 Youth: 4, 5, 6, 7 Kid's Flannel Shirts KID'S FLANNEL SHIRTS are made of 100% cotton and feature a 1/2 zip front. Additional features include two chest pocket and cuffs with button closures. The buffalo-plaid pattern colors are in: Blue/ Black, White/Black, or Red/ Black. MADSEN'S Size List 2650 Infant: 6, 12, 18 Month Size Toddler: 2T, 3T, 4T Child: 5, 6, 7 MADSEN'S 2650 2650 1795 1795 1995 1995 Youth: S- XL 2650 Buy four or more and save $1 per piece. Suspenders for Kids SUSPENDERS for kids are made of red elastic, and feature steel clips that clamp on to the waist band of most pants. The front is imprinted with either "Dad's Helper," "Grandpa's Helper," or "Little Logger." They are the perfect compliment to the hickory or flannel shirt above . List 9 95 1-5 8 95 MADSEN’S 6+ 795 Color: Red only Sizes: 24", 28", or 32" To fit suspenders, measure from the left front connection point on the waist band, across the shoulder, to the right rear connection. “The Pro’s Choice” 53 Master Page Suspenders Suspenders Buckle Suspenders SUSPENDERS are made of 2" wide welting and have flat leather ends for suspender buttons. The ends are made of the same leather that is used to make work boots. The elastic is extra wide for maximum comfort and support. BUCKLE SUSPENDERS are made of heavy-duty 2" black elastic and have heavy black leather straps for attaching to suspender buttons. Fitting adjustments are made with buckles instead of welt clips. They also have metal rings for attaching small items. They are available in "X" or "Y" back style. Colors: Red or Navy Blue. Color: Black only. Sizes: Small - 42", Medium - 44", Large - 46", X Large - 48", XXX Large - 52” Sizes: 42", 44", 46", 48" List 1700 1-5 1495 MADSEN’S 6+ List 3500 1-5 2795 MADSEN’S 1395 6+ Replacement Suspender Buttons A package includes eight button sets, which are usually enough to add or replace all the buttons on one pair of jeans and have a couple left over. Faller's Suspenders FALLER'S SUSPENDERS are made of special 2" wide welting that is special woven for maximum stretch and strength. They are the most comfortable and long wearing suspenders we offer. Colors: Black (without our logo) or Orange with Black lettering as shown. MADSEN’S 1-5 6+ To install replacement buttons, just stick the pivot through the fabric of your jeans. Set the button over it. Back up the button with a piece of wood and hit the pivot head with a hammer. 54 2695 349 299 Sizes: 42", 44", 46", 48", 54" List 2300 1-5 1795 MADSEN’S 6+ Item# 241-022 1695 Add $1 for 54". Call (360)736-1336 24 hours Master Suspenders Page "Y" Back Suspenders Clip-On Suspenders "Y" BACK SUSPENDERS are made of 2" wide cotton elastic and have leather ends for attaching to suspender buttons. Some wearers prefer the feel of "Y" backs over the more common "X" back suspenders. Color: Black only. Sizes: 42", 44", 46", 48", 54" Sizes: 42", 44", 46", 48", 54" List 2300 List 2300 1-5 1795 1-5 1795 MADSEN’S 6+ 1695 Add $1 for 54". Tip s ’ m a S CLIP-ON SUSPENDERS are made of heavy duty black elastic, and feature steel clips that clamp on to the waist band of most pants. The oversize clips are double plated to withstand moisture and perspiration. Colors: Black (without our logo) or Orange with Black lettering. MADSEN’S 1695 6+ Add $1 for 54" See the listing on page #57 for kid's suspenders To fit suspenders, put on your logger’s jeans and hold them at the height you want them. Next, measure the distance from the left front suspender button, across your shoulder, to the right rear button. Leather Covered Felt Shoulder Pad This SHOULDER PAD threads through one side of your suspenders to protect your shirt when carrying items on your shoulder. The heavy felt pad is covered with durable leather. Item# 280-1216. Classic Cotton Handkerchief This HANDKERCHIEF is large sized and made of cotton. It is available in: Red #4142R, Blue #4142N, or Black #4143B. List 1000 List 269 1-5 895 1-5 185 MADSEN’S 6+ 795 MADSEN’S 6+ 175 “The Pro’s Choice” 55 l Gloves Master Page White Ox Gloves WHITE OX GLOVES are made with four panel fingers. This creates finger "tubes" for increased dexterity. The extra sewing this design requires makes the gloves a little more expensive, but they are worth it. Available with or without an elastic back straps. Size: M, L, & XL. Thick Cotton Gloves THICK COTTON GLOVES are sized for big hands and made of extra thick cotton on the palm and fingers for cushion and long wear. 595 MADSEN’S List 780 MADSEN’S List 1-11 12-35 36+ 1-11 550 495 475 Add 20¢ for an elastic back strap and 60¢ for size XL. Bukaroo Gloves BUKAROO GLOVES are made with a leather palm and a canvas back. They are made from a full fit, gunn pattern with a wrap-around index finger and leather finger tips. Sizes: S to XL. 12+ 36+ POLAR PENGUIN GLOVES have a knit body and rubber-dipped palm, making them good for cold and wet conditions. They also wear well. The knit body is available in hi-viz orange #2903396HO or yellow #290-3396HY. Size: S to XL. 695 MADSEN’S 1895 MADSEN’S List 1-11 1-11 1595 1495 Add $2 for insulated version of this glove. PVC Coated Gloves PVC COATED GLOVES have a cloth body that is dipped in PVC which makes them waterproof and chemical resistant. They also feature a snug-fitting knit wrist. One size fits all. Item# 290-Y8KW. 12+ 36+ 56 450 350 CHILLY GRIP GLOVES have a warm synthetic liner and a durable rubber coated palm. They are flexible and providing excellent grip wet or dry. They are ideal for construction, fishing, and general labor. Sizes: S to XXL. Item# 290-A311 495 MADSEN’S List 1-11 1-11 36+ 495 Chilly Grip Gloves 795 MADSEN’S List 12+ 295 275 Polar Penguin Gloves List 12+ 350 249 225 195 12+ 36+ Call 625 525 485 (360)736-1336 24 hours Master Gloves Page Atlas Fit Gloves ATLAS FIT RUBBER PALM GLOVES are made of tight knit cotton with the palm and fingers coated with natural latex. The result is a durable glove with excellent wet grip. The open back provides ventilation. Available in sizes: S, M, L, & XL. Item# 290-ATL300. List 490 MADSEN’S 1-11 12-35 36+ 325 309 299 Atlas Therma Gloves ATLAS THERMA RUBBER PALM GLOVES are similar to the gloves listed above, but the body is constructed of poly/cotton thermal woven fabric for extra warmth on cold days. Thermal’s are available in sizes: S, M, L, & XL. Item# 290ATL301. List 490 MADSEN’S 1-11 12-35 36+ 425 399 375 Atlas Nitrile Gloves ATLAS NITRILE PALM GLOVES feature a seamless nylon liner that has been palm dipped in Nitrile rubber. The thin Nylon liner offers great dexterity, yet is durable and long wearing. The Nitrile rubber coating also wears like iron. The open back provides plenty of ventilation. The glove is machine washable. Available in sizes: S, M, L, & XL. Item# 290-TA370B. Faller's Gloves WHITE POLYESTER FALLER’S GLOVES are our traditional faller’s gloves. They have a snug fit that gives you the ability to pick up items that would be difficult with cotton gloves. Available in sizes: XS, S, M, L, & XL. 190 MADSEN’S 1-11 99¢ 12-35 79¢ 36+ 74¢ List Polypropylene Gloves BLUE POLYPROPYLENE FALLER’S GLOVES are similar to the gloves above, but are made of 100% polypropylene. This fiber wicks away moisture and provides insulation from the cold. These gloves make good glove liners for wearing underneath regular work gloves in cold weather Available in sizes: Small and Large. 490 MADSEN’S List 1-11 12-35 36+ WHITE NYLON FALLER’S GLOVES are tightknit and made of 100% nylon. This durable fiber doesn't absorb water and wears like iron. Its smooth texture also resists debris build-up. Available in sizes: XS, S, M, L, & XL. 490 MADSEN’S 590 List 1-11 495 1-11 12-35 36+ 450 415 199 175 Nylon Faller’s Gloves List MADSEN’S 219 12-35 36+ 195 105 99¢ “The Pro’s Choice” 57 l Gloves Master Page Leather Palm Gloves LEATHER PALM WORK GLOVES feature a suede cowhide palm and fabric back. They also have a leather knuckle strap and 2 1/2" safety-cuff. These durable gloves are also an outstanding value. Size: L & XL. Item# 290-3501C 498 MADSEN’S List 1-11 12-35 36+ Hi-Viz Leather Palm Gloves HI-VIZ LEATHER PALM WORK GLOVES have an A grade split cowhide suede cowhide palm and fabric back. They also have a 3M reflective safety stripe and flourescent knuckle strap. Available in sizes: M, L, & XL. Item# 290-1954 498 MADSEN’S List 295 275 250 1-11 12-35 36+ Wool Faller's Gloves GREEN WOOL FALLER’S GLOVES are warm and long-wearing. They are knitted from a blend that contains 70% wool. They can be worn alone or as liners for extra warmth. Available in sizes: M, L, & XL. WONDER GRIP GLOVES have a double-coated latex palm and a knitted body. This liquid-proof palm gives amazing grip in most working conditions. Sizes: S to XXL. Item# 290-WG318 995 MADSEN’S List 498 MADSEN’S 12-35 36+ 325 RAGG WOOL GLOVES are warm and durable. Their seamless knit construction is of 85% wool and 15% nylon. The extended cuff length is for added warmth. The gloves are natural oatmeal in color. They are available in sizes: S or L. 598 MADSEN’S List 1-11 12-35 36+ 58 1-11 299 279 Ragg Wool Gloves 350 315 Wonder Grip Gloves List 1-11 399 12+ 495 450 Gold Gripper Gloves GRIPPER GLOVES are similar to faller’s gloves, but have a web of flexible rubber that is bonded to the surface of the glove for additional grip. Available in sizes: M, L, & XL. 299 MADSEN’S List 495 1-11 465 450 12-35 36+ Call 245 225 210 (360)736-1336 24 hours Packs &Master Boot Dryer Page l Utility Packs & Bags UTILITY packs are made of green cotton canvas. They are available in several styles and types. Small Pack Item# 490-1144 Mussette Pack Item# 490-1099 Large Pack Item# 490-2304 Bags MADSEN’S Size #490-1099 Mussette Pack 15" X 15" X 5" #490-1144 Small Pack 17" X 13" X 6" #490-1140 Large Pack 20" X 13" X 7.5" Travel 110v Boot Dryer Glove Drying Attachment The PEET SHOE DRYER is endorsed by boot manufacturers including Danner, Buffalo, and White. Sweatshirt List Travel Boot Dryer No matter what weather the morning brings, starting the day with dry boots Glove Drying Attach is always a plus. In addition to comfort, this dryer will make your shoes Multi-Boot Dryer last longer and your feet stay healthy. 12" Boot Extensions Standard 110v Boot Dryer 2195 3195 3695 Both the standard and travel dryers Standard Boot Dryer plug into a standard 110v outlet. MADSEN'S 4999 3999 1999 1499 9999 7999 1499 999 4999 3999 “The Pro’s Choice” 59 Master Page Boot Accessories Boot Saver Toe Caps BOOT SAVER toe caps help prevent premature wear of the toe area on a work boot. This is a common problem on boots with hard safety toes. Included in the kit are two caps, sandpaper, and a tube of cement for attaching them. Toe Armor Coating TOE ARMOR provides a durable layer of protection to the toe or any area on a boot that needs extra protection. Toe Armor is easy-to-apply, hardens in 24 hours, and cleans up with water. It works best on dry new leather. Colors available: Brown or Black. List 950 1-5 895 MADSEN’S 850 6+ 1100 List MADSEN’S 995 Brown#95128 Black# 95129 Boot Tongue Protectors TONGUE PROTECTORS (also called false tongues) are cut from leather and fit behind the laces on boots to protect the tongue and gusset leather. Prices are for a pair. We carry them in two sizes: The long ones fit best on boots with tall tops and those with a laceto-toe design. Either can be cut down to fit most any boot. List MADSEN’S Type 550 #310-207 Short 850 #310-217 Long 495 795 Durable Water Proofing DURABLE WATER PROOFING is ideal for rain gear, tents, or boots. If your favorite waterproof jacket or soft-shell has lost its water resistance, or your rain gear is no longer shedding rain, don’t throw it out! Spray on ReviveX® Durable Waterproofing to create or restore water, oil and stain repellency on all your favorite outerwear. Just spray this water-based formula on wet or dry garments, dry, and enjoy waterproof pants, jackets and rain gear again. No matter what the weather does, you’ll stay drier—and stay out longer—with ReviveX from Gear Aid®. 60 Call List 1100 MADSEN’S 995 (360)736-1336 24 hours Master Boot Page Care Leather Boot Dressing OBENAUF'S LP paste was originally developed for treating the boots of wildland firefighters. What works on the boots of firefighters also works on the boots of logger's, timber fallers, and those working in less harsh conditions. Obenauf's has become popular among all boot wearers and is the best selling boot dressing at Madsen's. It is made by combining three different natural oils with bee’s wax and propolis. This combination resists bacteria and mildew, repels water, and keeps leather soft and flexible. Warming LP prior to its application makes it easier to apply and warming the boots with a hair dryer after its application helps LP penetrate the leather. OBENAUF'S leather oil is easy to apply and good for touch-ups between applications of LP. It is also good for softening dry leather. HUBERD’S is classic logger’s boot grease. Huberd’s will darken light colored leather because it contains pine tar. If your family has a history of working in the woods, your grandfather probably used this - Huberd’s has been making it since 1929. BEE NATURAL wax oil helps waterproof and preserve leather boots. It contain's pine tar and is a good substitute for those who used to use Logger's World Boot Grease, which is no longer available. BEE NATURAL mink oil contains no wax or pine tar. It simply softens dry leather and makes it flexible. SNO-SEAL is an all season leather protectant. Its bee’s wax base waterproofs and protects leather from rain, snow, salt, and sun. It also lubricates and protects against drying and deterioration. Sno-Seal dries scent free. DANNER boot dressing is designed to protect leather and help maintain water repellency. It also prolongs the beauty and suppleness of fine leather when used regularly. It applies easily with a clean dry cloth. Please specify color: Clear, Brown, or Black. Description Size #310-564 Obenauf’s LP Boot Paste 8 oz #310-584 Obenauf’s Boot Oil 16 oz #310-7775 Huberd’s Shoe Grease 7.5 oz #310-2332 Bee Natural Wax Oil 16 oz #310-2332 Bee Natural Wax Oil 32 oz #310-1308 Bee Natural Mink Oil 8 oz #310-1330 Sno-Seal Protectant 7 oz #303-97501 Danner Boot Dressing 4 oz List Price 1495 1695 595 1600 2500 750 550 950 1-5 ea 1295 1495 495 1395 2295 695 495 895 6+ ea 1195 1395 425 1295 2150 650 450 795 “The Pro’s Choice” 61 l Master Boot Care Page Boot Inserts & Insoles Improve the fit and comfort of your boots with an insole or insert. We carry several types: The wool felt insert offers thermal insulation and cushion comfort. The Contour foam insole adds cushion and arch support to flat soled boots. MADSEN’S PRICE ! - 5 Pair 6+ All of the insoles can also help take up space in Type boots that are a little big. This is a common prob95 495 lem when your foot is a half size and the boots #28114 Wool Felt Insole 95 you want come only in full sizes. #27002 Breath-O-Prene Foam Insole 799 5 8 Shoe Goo Sealer Shoe Goo is a urethane product with hundreds of uses. In our shop, the guys even use it to seal terminals on saw electrical components. Tube size is 3.7 ounces. List 6 00 1-5 5 50 Freesole Repair FREESOLE can be used to rebuild worn soles or heels, for fixing separations, or for waterproofing boot stitching. Some customers also use it to coat the toes on rubber boots for extra protection from abrasion and punctures. It has high adhesion to leather or rubber. Tube size is 1.5 ounces. 4 6+ Item# 310-455 95 3700 MADSEN’S 1-3 4+ 2795 2495 Mount a SCRUSHER near the entrance to your home or office and keep dirt outdoors where it belongs. The stiff bottom bristles remove debris from even deep treads, while the soft side brushes won’t scratch the uppers. Made in the USA. 62 1-5 650 595 6+ Calk Wrenches Boot Brush List 700 MADSEN’S MADSEN’S Item# 310-1101 List Maxpro Ratcheting Calk Wrench Standard Calk Wrench Wesco Calk Wrench MADSEN’S PRICE Type 1-5 #1100 Standard Calk Wrench #220 Wesco Calk Wrench #365 Ratcheting Wrench Call 3 1000 995 49 6+ 295 900 895 (360)736-1336 24 hours Master Boot Page Care Replacement Calks Replace old dull screw-in calks (spikes) with a new set of sharp ones. We carry several types in bags of fifty: Redwood Length Spikes Tool Steel Spikes • Our standard spikes are made of tool grade steel for maximum wear and durability. This is our best seller and the best choice for allaround use. • The "Redwood" length spike, is similar to the standard spike, but has 1/2" long points. Some customers like them when working around trees with deep bark. If you are tempted to get these thinking they will wear longer than standard spikes, know they tend to pack up more with debris and their length puts extra stress on the receptacles in the boot soles. • The Cermec spike has a hardened core. These are standard length and fit into regular receptacles. Their hard core extends their life when working in rocky or abrasive conditions. • Wesco spikes are proprietary and fit only Wesco boots. These sharp and durable spikes have a nut shaped sub-base that fits a special tool for easy removal and replacement. They will not fit into standard calk receptacles. Wesco Spikes Cermec Spikes MADSEN’S PRICE Type 1-5 1195 10 95 Tool Steel (case of 1000) 155 139 Redwood Length (50) 1295 11 95 Cermec Spikes (bag of 50) 19 18 50 Wesco Spikes (bag of 50) 27 25 Tool Steel Spikes (50) #186 #7066 #218 #1082 #2002 6+ 95 95 95 95 50 Note: Most calked boots have about 25 spikes per boot. The count varies a little due to different spiking patterns and shoe size. Leather & Nylon Boot Laces NYLON LACES are strong and inexpensive. If you trim them, be sure to heat up the ends. Melting the ends of the cut fibers helps keep them from fraying. Size & Type 72" Nylon 8"-12" LEATHER LACES are a little more expensive, but are preferred by most loggers. They are more flexible than nylon laces and will not wear out the eyelets in boots as quickly. Our leather laces are uniformly cut from top quality hide. 72" Leather 8"-12" 96" Leather 8"-12" 108" Nylon 12"-16" 108" Leather 12"-16" Fits Boot Top Height List Price 295 525 650 375 740 MADSEN’S 1-9 10+ 249 495 525 325 595 225 450 475 295 550 “The Pro’s Choice” 63 l Master Page Calked Boots Calked Boots WESCO CALKED BOOTS are available with either 12" or 16" tops. The 12" top boot is a semi-lace-to-toe design, while the 16" version has a plain toe. Both are made of durable black leather with a reversed vamp. This makes the vamp more resistant to damage from the boot's sharp spikes. Additional features include: Rolled leather top facing, an all leather mid-sole and heel base, heavy-duty stitching, a formed Stytherm counter, all leather gussets, removable Ortholite foam slip-in inserts, and removable false tongues. These boots are rebuildable and still made in Scappose, Oregon. 12" Top: #1912SI List 49900 MADSEN’S 43995 We stock sizes: 8 - 13 in D & E 16" Top: #2916SI List 51900 MADSEN’S 45995 We stock sizes: 8.5 - 13 in D & E Buffalo Calked Boots HI-LINE/BUFFALO CALKED BOOTS are made in Spokane, Washington and have been standard equipment in the Western woods since 1906. These boots feature a 12" top, a spring heel, and rubber-tire-cord out-soles with replaceable calks. The uppers are made of black 7oz full grain oil tanned leather. They also have a double vamp, full snagresistant seams, solid brass stud-hooks and eyelets, and double-lock stitching. The boots are also rebuildable for years of extended life and value. Style# 1271RDS List 42000 1-2 36995 MADSEN’S 3+ 35995 We stock sizes: 8 to 13 in D width & 8.5 to 12 in EE width Calked Boots MADSEN'S CALKED BOOTS have 10” tops and are made of durable black leather. They also feature a classic lace-to-toe design that allows for small changes in foot width. This improves the fit over the life of the boots and allows the wearer to adjust the fit for seasonal changes in sock thickness and so on. Other features include: Leather heel inserts, brass eyelets and hooks, and screw-in calks. Boots made with these features are usually expensive, but our volume buying allows us to offer these durable boots at a value price. Made in Washington. 64 Call Style# MH7801 List 30095 1-2 24995 MADSEN’S 3+ 23995 We stock sizes: 7 to 14 in D width & 7.5 to 13 in EE width (360)736-1336 24 hours Calked MasterBoots Page HI-TEC Hiker Calks HIKER CALKS begin as Hi-Tec brand hiking boots. The lug bottoms on the original soles are ground off and replaced with a second sole containing screw-in spikes. They also feature a waterproof breathable Dri-Tec liner. Style# 9046C. MADSEN’S We stock sizes: 15495 8 to 13 in Medium width only Pronghorn Calks DANNER doesn’t make boots with calked soles, so the original Pronghorn sole tread is ground off by a local boot-maker and replaced with a second sole containing screw-in spikes. The end result is a lightweight Gortex® lined calked boot. The taller tops also offer more ankle support that the boots above and are better for keeping wood chips out of your boots when you run a saw. These boots are not as durable and do not offer the support of conventional leather calks, but they are light-weight and less expensive. Users also report that they break in quickly and are comfortable right from the start. Although waterproof failure is rare, because calk soles have been added, there is no warranty if the boots leak. Style# 42282C. We stock sizes: MADSEN’S 7 to 14 in D width & 95 8 to 13 in EE width. 234 Faller II Calks HOFFMAN FALLER II CALKED BOOT is a waterproof leatherstyle calked boot. The 10" upper is triple-stitched and has a replaceable molded sole. The boot also has a cushion insole for comfort. Style# 037-1. Note: Inside the leather upper is a Sympatec® bootie, which is waterproof and breathable. Although Sympatec® failure is rare, Hoffman's will not warranty the waterproofness of this boot. List 29500 MADSEN’S 25995 We stock sizes: 7 to 13 in E width only “The Pro’s Choice” 65 l Master Page Calked Rubber Boots Calked Rubber Boots CALKED RUBBER BOOTS by Viking Askim have steel toes and cutresistant material laminated into the front of the boots. The spikedbottom soles feature replaceable screw-in spikes.. These soles are built into the boots at the factory, so there is no secondary sole to separate. The uppers are made of high content natural rubber and the liners are 100% cotton. If you are looking for a durable rubber boot, this is it. Style# VW-65. List 18000 Available in whole MADSEN’S sizes: 95 Pair 6 - 14 144 LW5 Calked Rubber Boots LW5 RUBBER BOOTS have cut-resistant material laminated into the front of the boots (like the boots above), but do not have a safety-toe. The bottoms are molded-in and feature replaceable screw-in calks. A mixture of natural rubber makes these boots resistant to oils and chemicals. List 20900 Pair 14995 MADSEN’S Available in whole sizes: 7 - 13 Calked Rubber Boots XTRATUF CALKED RUBBER BOOTS are well known for comfort and durability. They are made of tough neoprene rubber, which is softer, lighter, and more pliable than ordinary rubber. They also have a snug ankle fit and 16" tops - two more features loggers like. Since Xtratuf doesn't offer a calked version of this boot, our friends at Hoffman's grinds off the regular tread and replaces it with an extra sole that contains replaceable screw-in spikes. Available in whole sizes: 7 - 13. See page #73 for information on the noncalked version of this boot. 66 List 18500 1-2 16495 MADSEN’S 3+ Call 15995 For an insulated version of this boot add $10. (360)736-1336 24 hours MasterBoots Page l Calked Insulated 'Pac' Style Boots "PAC" STYLE BOOTS feature leather uppers, waterproof rubber bottoms, and wool felt liners. The boots have 14” uppers for ankle support and protection. These full grain leather uppers are triple stitched where the leather joins the rubber bottoms. Fitting advice: These boots are available in full sizes 6 - 13. They run true to size and are sized with the felt liner in place. If you wear a size 10 in regular boots, buy a 10. If you wear a 9 1/2, buy a 10, because there are no half sizes. List 23995 1-2 21495 MADSEN’S 20495 3+ Calked Rubber Boots CALKED RUBBER BOOTS by Hoffman have 12" tops and steel shanks. They also have a full-lace front for more ankle support than most slip-on boots offer. This feature makes the boots easier to put on and take off, too. These boots also have a 3mm felt lining for warmth and comfort. Style# 12RIC. List 14900 Available MADSEN’S 134 1-2 in whole sizes: 7 - 13 95 12995 3+ Romeo Slippers ROMEOS can be worn indoors as slippers or outdoors as shoes. That's why they are so popular with loggers and timber fallers. These romeos are made in the USA and feature tough leather uppers and VIBRAM® wedge boot soles. These soles have tread for grip, but clean well, which reduces tracking of mud or debris. Muck Camp Shoes MUCK CAMP SHOES are waterproof slip-ons. They are similar to the Muck Chore Boots, but are low cut, making them easy to get on and off. One customer describes his Camp Shoes as, “waterproof romeo slippers.” If you travel in a boat or motor-home, pack these instead of rubber boots because they take much less space. Style# EWCC333T MADSEN’S 10695 Pair Sizes available: In half sizes 7 to 15 in D width, 8 to 14 in EE width. List 9000 MADSEN’S 6495 Available in men's whole sizes: 7 -13 “The Pro’s Choice” 67 Master Page Danner Boots East Ridge Boots EAST RIDGE BOOTS have a full-grain leather upper with 8" tops. Inside the boots is a 100% waterproof/breathable Gore-Tex lining. The boot features include an oil/ slip-resistant Danner/Vibram out-sole with stitch-down construction. The dual-density mid-sole and cushioning polyurethane footbed helps provide all-day comfort. This boot is recraftable. Style# 62113 List 26000 MADSEN’S 24000 We stock sizes: 8-12 D width & 8.5-11.5 EE width including 1/2 sizes. Rain Forest Boots RAIN FOREST BOOTS have 8" tops and uppers made of waterproof leather, and Gore-Tex booties for dry feet. They also feature a lace-to-toe design, stitch-down construction, and Vibram soles. This makes them a great choice for contractors and sportsmen alike. If you want a good pair of boots, but are unsure of which to choose, pick these. They are great all- around general purpose boots. Made in USA. Style# 14100. List MADSEN’S 34000 We stock sizes: 8-12 D width & 8.5-11.5 EE width including 1/2 sizes. Add $30 for Super Rainforest version with safety toe Style# 11550 Quarry Boots QUARRY BOOTS are one of the most popular boot styles. They have black leather uppers and an 8" top. They are good boots for work, hunting, or any outdoor activity. We carry two versions: one with a regular to and one with a non-metalic safety-toe. All have waterproof Gore-Tex liners and dualdensity Vibram Cascade soles. Made in USA. Style# 17309 68 Call 35900 List 28995 MADSEN’S 25000 We stock sizes: 8-15 D width & 8-14 EE width including 1/2 sizes. For boots with safety toe add $10. Style# 17311 (360)736-1336 24 hours MasterBoots Page Radical Boots RADICAL BOOTS are great work shoes, but their stylish looks make them good shoes for casual wear, too. Danner's exclusive Terra Force platform delivers lightweight stability to the job-site or wherever you choose to wear them. They also feature oil resistant Pro Grip soles and waterproof Gore-Tex linings. These shoes are imported, but their quality is 100% Danner. Style# 45254. List 18000 MADSEN’S 16000 We stock sizes: 8-12 D width & 8.5-11.5 EE width including 1/2 sizes. For boots with safety toe add $10. Style #45258 Pronghorn Boots PRONGHORN BOOTS are build on Danner's DEP1-H last, which gives these boots more of an athletic fit with a tighter heel-pocket and wider toe-box. They are great for high-speed outdoorsmen looking for a boot that is fast and agile. The uppers are made of a combination of durable nubuck leather and 1000 denier nylon. They also have a waterproof and breathable Gore-Tex lining. The outsole is Danner's dirt and rock gripping Talon. These shoes are imported, but their quality is 100% Danner. Style# 45003. List 20900 MADSEN’S 19000 We stock sizes: 8-15 D width & 8-13 EE width including 1/2 sizes. Smoke Jumper Boots SMOKE JUMPER BOOTS are NFPA approved for wild-land fire fighting. They feature 10" tops and uppers made of 7 oz. full-grain black oil-tanned leather. They also have a leather heel counter and leather pull-strap. Other features include a rolled collar, double-lock stitching, and solid brass eyelets. These boots are made in the USA and are completely rebuildable. Style# 110V. List 35000 MADSEN’S 31395 We stock sizes: 8-13 D width & 8.5-12 EE width including 1/2 sizes. “The Pro’s Choice” 69 l Master Page Leather Boots Value Logger List The VALUE LOGGER has an 8" top and a brown leather upper. It features a one-piece rubber lug out-sole with welt construction and a steel shank. It is electrical hazard rated. Don't let the low price fool you, this is a darn good boot. Style# 821. Waterproof Hard-Toe Logger USA Logger 9895 We stock sizes: 8 D - 15 D & 8.5 EE - 13 EE. 15900 MADSEN’S 12995 We stock sizes: 7.5 D - 12 D & 8.5 EE - 11.5 EE. List 20100 MADSEN’S The USA LOGGER is made in the USA. It has a 9" top and a full-grain black leather upper. It features a one-piece Vibram outsole, a heavy-duty steel shank, and a Poron Permafresh insole for comfort. This boot is also electrical hazard rated. Given its quality components and the fact it is made here in the US, it is an excellent value. Style# 922. 70 MADSEN’S List The WATERPROOF HARD-TOE LOGGER has an 8" top and a copper colored leather upper. Its features are similar to the boot above, plus it also has a waterproof "scubaliner" and steel safety toe-cap. Again, this boot is imported, but offers quality and features usually found on boots costing twice as much. Style# CA9821 12700 Call 17895 We stock sizes: 7.5 D - 12 D & 8.5 EE - 11.5 EE. For boots with safety toe add $9. Style# 1922 (360)736-1336 24 hours Leather MasterBoots Page Waterproof Logger List 17000 The WATERPROOF LOGGER is a lace-totoe style boot. It features a waterproof scu- MADSEN’S baliner and Taibrelle lining. It has a full95 grain black leather upper with an 8" top. Underneath is a steel safety toe. It also has We stock sizes: welt construction, a triple-rib steel shank 8 D - 13 D & for support, and a slip-resistant lug sole. 8.5 EE - 13 EE. Style# CA9825. 142 Waterproof Work Boots The WATERPROOF WORK BOOT has an 8" top. We also carry with a composite safety-toe. All boots feature a full-grain black leather upper and waterproof Scubaliner lining for dry feet. The boots also have a heavy-duty steel shank for support. We stock sizes: 8 - 12 in D & 8.5 - 11.5 EE width. Style Type List MADSEN’S PRICE #CA8030 8" top without Safety Toe 17200 13695 #CA8530 8" top with Safety Toe 17800 15195 Lug Sole Boots MADSEN'S LUG SOLE WORK BOOTS are MADSEN’S custom made for Madsen's here in the 95 USA. We took the durable leather uppers 1-2 used on our calked boots and mated them 3+ 21595 with Vibram lug soles and block heels. 221 We stock sizes: Additional features include: Steel shanks, 7.5 D - 14 D & leather heel inserts, and brass eyelets and 8 EE - 14 EE hooks. Lace-to-toe boots made of these in full and half sizes. materials are usually expensive, but our volume buying allows us to offer them at a value price. Style# MH7809 “The Pro’s Choice” 71 l Master Page Rubber Boots Muck Chore Boots MUCK CHORE BOOTS feature flex foam booties that are waterproof, lightweight, and flexible. They form to the wearer’s calf for maximum comfort. Customers report these are the most comfortable "rubber" boots they have ever worn. Among their features are steel shanks for added support and moisture control linings that wicks away perspiration. Available in whole sizes only: men's 6 -13 95 women's: 7 - 14 MADSEN’S Type Part# List PRICE Chore Boot CHH000A Chore w/hard-toe CHS000A 90 10895 12095 13595 Muckmaster Boots MUCKMASTER BOOTS are similar to Muck Chore Boots, but feature aggressive high-traction soles for grip and stability. Additional features include high rubber overlays for protection against rocks and brush, thermal foam underlay for additional warmth, and additional achilles overlays for extra protection. Contoured foot-beds offer support and all-day comfort. MADSEN’S Type Part# List PRICE Muckmaster Boot MMH500A14095 Mid-cut MuckmasterMMM500A13595 10595 10295 PVC XT Boot PVC XTPS are rugged boots that give dependable waterproof protection at an economy price. They are seamless molded boots that are reinforced at critical stress points. The hard-toe version meets ANSI spec 241 1999 section 1 for impact/75 and compression/75 toe protection. They are both made in the U.S. We stock them in whole sizes: 7-13. Plain toe Style #75122. 72 Call Above: The tall boot is the standard height and the shorter one is the mid cut. Available in whole sizes only: men's 7 -13 women's: 8 - 14 List To 3800 MADSEN’S 2895 (360)736-1336 24 hours Rubber MasterBoots Page Rubber Boots XTRATUF BOOTS are made of neoprene rubber that is tripledipped in a special sealant. This makes them resistant to chemicals and oil. This also makes them softer, lighter, and more pliable than ordinary rubber boots. These boots feature built-in cushion insoles with arch support, fabric lining, supportive heel counters, and extra-thick bumpers for toe and heel protection. The chevron slip-resistant soles grip smooth wet surfaces for better traction and stability. #22272 Standard Knee Boot Sizes: 4 - 14 Kid’s Xtratufs $26.99 Type #22273 Insulated Hard Toe Sz: 8 - 13 #22274 Insulated Sz: 5 - 14 Safety MADSEN’S Toe Insulation List PRICE 12900 #22272 Standard Knee Boot #22273 Boot w/Safe Toe & Insulation X #22274 Boot w/Insulation X X 15800 14900 8995 10895 10395 Tall Boot Socks PRONGHORN & QUARRY boot socks are made for use in Danner boots, but will work well in other boots, too. The high elastane Lycra content helps keep the socks up and maintains a lasting fit. The socks feature nylon reinforcing in the toe, heel, and shin area for extra wear and comfort. They contain: 38% merino wool, 37% acrylic, 10% stretch nylon, 10% nylon, and 5% elastane Lycra. Available in sizes: M - XL. Style# 50303 & 50316. 2400 List MADSEN’S 2000 Ea Pair WADER SOCKS go up over-theknee and are ideal for use with any high-topped rubber boots. The socks are knit from a thermolite/ merino wool blended fiber and feature nylon reinforcing in the toe, heel, and upper. This provides both comfort and durability. The socks contain: 17% nylon, 80% merino wool, and 3% spandex. Available in sizes: M - XL. Made in the USA. Style# 9061. 1800 List MADSEN’S Ea Pair 1495 “The Pro’s Choice” 73 l MasterSocks Work Page Outdoorsman Socks OUTDOORSMAN SOCKS are heavy-weight wool blend boot socks. They are made with ultra-soft merino wool for warmth and comfort. They also feature arch support for added fit and have a full-cushion leg and foot. The toe seam is flat for comfort. The sock is made of 65% acrylic, 20% merino wool, 13% nylon, and 2% spandex. Made in the USA. Available in sizes M - XL. Style# 8380. 1100 1-5 pr 745 MADSEN’S 6+ pr 715 CLEAR CREEK Wool Blend Boot Socks List WOOL BLEND BOOT SOCKS are made of 38% polyester, 31% acrylic, 19% Merino wool, and 9% nylon. This combination of fibers wick moisture from feet and dry quickly. It also offers itch-free comfort not found in all wool blend socks. Theses socks also feature a reinforced heel and toe area for great durability. Available in sizes 10-13 only. Style# CC847-4. The price is for a four-pairpack, so this is an excellent value. 2100 MADSEN’S 4 Pair 1595 CREW SOCKS VALUE PACK come in a six-pair pack. They are made of 87% ring-spun cotton, 11% nylon, 1% polyester, and 1% spandex. This mid-weight sock is for light work or everyday casual wear in moderate to hot temperatures. It can also be used for layering. The cotton content absorbs moisture and draws it away from the skin. For most users, this sock works well in shoes and boots with tops 8” and less. Made in the USA.Available in size 10-13. Colors: White or Black/ Gray mix. Style# 6546 List 1800 Diabetic Crew Socks List 600 3-pack 499 Crew Socks Value Pack MADSEN’S 6 Pair 1225 MADSEN’S PRICE DIABETIC CREW SOCKS have a knit cotton blend foot and a loose fitting top. These socks are recommended for people with diabetes, edema, neuropathy, or any kind of circulation problems. Colors: Grey or White. Available in size: 10-13 or 13-15. Made in the USA. These come in a package of three pairs. 74 List Call (360)736-1336 24 hours Master Work Socks Page Steel Toe Boot Socks STEEL TOE BOOT SOCKS have a double-cushioned sole and toe box, which makes them especially good for use in boots with safety toes. They are made of 81% acrylic, 18% stretch nylon, and 1% Spandex. This combination of fibers keeps feet dry, warm, and comfortable. They also feature a stay-up leg, a reinforced foot bottom, and a smooth-looped toe seam. Their precise boot-to-sock fit insures comfort in any type of work boots. Made in the USA. Available in sizes M - XL. Style# 6510. List 1400 1-5 pr 975 MADSEN’S 6+ pr 925 Thermal Boot Socks RUGGED THERMAL BOOT SOCKS are made of 62% hi-bulk acrylic, 20% stretch nylon, 17% worsted wool, and 1% Spandex. They feature a fully thermalined construction that absorbs shocks and insulates. They also have a non-terry vamp to reduce bulk and a flat toeseam. The toe and heel – high wear areas – are nylonreinforced. Made in the USA. Available in sizes M, L, & XL. Style# 6640. List 1200 1-5 pr 825 MADSEN’S 6+ pr 775 Steel-Toe Wool Socks STEEL-TOE WOOL SOCKS are made of 88% worsted wool, 10% nylon, 1% high bulk acrylic, and 1% Spandex. They feature a full-knit body with extra cushion in the toe and sole. They also have flat toe-seams and the heels are reinforced. The added Lycra helps the socks stay up. These are excellent cold-weather boot socks. They will keep your feet warm even in cold working conditions. They are available in sizes M, L, & XL. Made in the USA. Style# 6650. List 1600 1-5 pr 1125 MADSEN’S 6+ pr 1075 Merino Wool Socks MERINO WOOL SOCKS have an outer layer of 85% Merino wool, 14% stretch nylon, and 1% Spandex. The inner layer is fully thermalined for extra comfort and shock absorption. The heel and toe are reinforced for extended wear. The toe has a flat smooth seam for extra toe comfort. Super-soft Merino wool provides itch free comfort and naturally moves moisture away from the foot. The sock also has a Lycra® arch brace for support and snug fit. Available in sizes M, L, & XL. Made in the USA. Style# 7014. List 2000 MADSEN’S 1-5 pr 6+ pr 1425 1375 “The Pro’s Choice” 75 l MasterSocks Work Page Wick Dry Thermals WICK DRY THERMAL heavyweight socks are made of 65% Duraspun® acrylic, 20% worsted wool, 14% nylon, and 1% Spandex. This blend wicks moisture from your feet into a moisture-absorbing outer layer. The result is warm and dry feet. The nylon serves to make the combination abrasion resistant. The body of the sock is “terried” or looped inside for cushion. The color is grey with an olive top. Available in sizes M - XL. Made in the USA. Style# 7586. List 1000 1-5 pr 715 MADSEN’S 6+ pr 665 Logger’s Socks Dry feet are comfortable and healthy feet. That's one of the reasons LOGGER'S SOCKS are our best selling work socks. They contain high bulk Orlon acrylic, a miracle fiber that wicks moisture away from the feet. When this Orlon is combined with high stretch nylon, the results are very durable socks which will keep feet warm and dry. The full terry knit also provides cushion and thermal insulation. Logger's Socks are white with red tops. They are made of 80% Orlon acrylic, 10% cotton, 9% nylon, and 1% Spandex. Available in sizes M - XL. Made in the USA. Style# 7587. List 1200 1-5 pr 825 MADSEN’S 6+ pr 775 Acrylic / Wool Socks POLY/WOOL BLEND extra-heavyweight socks are 49% acrylic, 36% Merino wool, 14% nylon, and 1% Spandex. The Wick Dry system moves moisture away from the skin, which helps keep your feet dry under a variety of weather and temperature conditions. This helps reduce hot spots, which can eventually lead to blisters. These socks are warm, comfortable, and longwearing. Made in the USA. Available in sizes M & L. Style# 7359. List 1400 1-5 pr 975 MADSEN’S 6+ pr 925 Wool Work Socks WOOL WORK SOCKS are extra-heavyweight work socks made of 84% worsted wool. This premium wool is preshrunk to insure fit throughout the leg and foot. The balance is a blend of 9%acrylic, 6% nylon, and 1% Spandex. These socks are terry-knit in the foot area, while the leg is rib-knit. The over-the-calf leg length insures a good fit, even with tall rubber or leather boots. Available in sizes M - XL. Made in the USA. Style# 7267. 76 List 1600 1-5 pr 1125 MADSEN’S 6+ pr Call 1075 (360)736-1336 24 hours Master Work Socks Page l Heavy-Weight Wool Blend Boot Socks HEAVY-WEIGHT WOOL BOOT SOCKS feature superior moisture control and warmth, stay-up leg and top, and a reinforced heel and toe. These heavyweight socks are made of 30% acrylic, 30% ultra-spun polyester, 20% wool, 17% nylon, and 3% Spandex. Made in USA. Size L. Style# 9727/2. Sold in two-pair packs. Over-the-Calf Tall Boot Socks OVER-THE-CALF BOOT SOCKS have 17" tall tops and are great for use with tall-top calked boots. Additional features include added arch support, reinforced heel and toe, and a full-cushion leg and foot. These heavyweight socks are made of 30% acrylic, 30% ultraspun polyester, 20% wool, 17% nylon, and 3% Spandex. This blend helps keep feet warm and gives superior moisture control. Made in USA. Size L. Style# 9175/2. Sold in two-pair packs. List MADSEN’S 775 35 3+ 2-pk 7 2-pack List 1700 MADSEN’S 1165 20 3+ 2-pk11 2-pack Ultra-Dri All-Season Tall Boot Socks These 17" over-the-calf ALL SEASON TALL BOOT SOCKS feature ultra-dri moisture control, arch support for added fit, stay-up leg and top, and a reinforced heel and toe. These work great with tall-topped calked boots like Wesco 16" top boots. The sock is made of 75% ultra-spun polyester, 23% nylon, and 2% Spandex. Made in the USA. Size L. Style# 9780. 1100 List 800 1-5 pr 545 MADSEN’S 6+ pr 495 “The Pro’s Choice” 77 Master Page Faller's Items Timber Falling Sign A TIMBER FALLING SIGN is required on many jobs for road safety. This one is made of high-visibility orange mesh and rolls up for easy storage. The optional three legged stand also folds for easy transport. Blanket Canteen The CANTEEN holds four quarts. It has a blanket cover and is plastic lined. List 1200 1-9 895 MADSEN’S 825 10+ Duct Tape Sign Only Tripod Only DUCT TAPE can temporarily repair nearly anything. It can fix a torn rain-coat. It can hold a broken cover on a saw. It can be used to reinforce the fingers on work gloves. We even use it to reinforce shipping boxes when we're sending out a heavy item. This tape is good quality -- it's tough and will stick to almost anything. 5395 4595 Gas Jugs Madsen's carries several types and sizes of gas jugs. They are all made of durable and non-corrosive plastic. Spouts are included. Call us for more information. Shown above is the combo jug. This is good for saw operators because you can put mixed fuel on one side and bar & chain oil on the other. Type Gas Capacity Combo Gas/Oil Jug 1.5 gal. 78 Gas Only Jug 1 gal. Gas Only Jug 2 gal. Gas Only Jug 5 gal. PRICE 2995 1099 1399 1899 List 895 1-9 699 MADSEN’S 625 10+ Air Filter Oil & Cleaner A light film of AIR FILTER OIL on the element of a K&N air filter helps trap small particles. The CLEANER is a special detergent for cleaning K&N filters. Type Filter Oil Size 12.25 oz. Filter Cleaner 32 oz. Call PRICE 895 1195 (360)736-1336 24 hours Master Page l Saw Air Filters MAX-FLOW Air Filters The Max-Flow filter system is easy to install and does not require any modification to the chain saw. The kit includes: A filter cage, a heavy-duty rain cover, two foam elements, a nut plate, and instructions. The system can be used with or without the rain cover. The kit comes with two elements. Each has different pore sizes for different working conditions. A small-pore foam element is best when working in dusty conditions. The large-pore foam offers maximum flow, but does not filter fine particles. Both filters are washable and reusable. MAX-FLOW recommends using BEL RAY foam filter oil after each cleaning. Max-Flow filter kits are available for STIHL 044, MS440, 046, MS460, 066 & MS660. Please specify which saw you are fitting. MADSEN’S PRICE Replacement Foam Elements BEL RAY Filter Oil - one liter 5095 1475 1495 Pro Saw Performance Air Filters Shown below are a number of popular air filters. Some require velocity stack adapters and modification to the filter cover housings. We carry a few filters not listed here and several adapters. Please contact us for information on the filter options for your saw. Type Description Fits MADSEN’S PRICE List Price 1-4 ea 5+ ea 13⁄4" flange diameter 2595 2195 #K&N 4 2" flange diameter 2695 2295 2195 #K&N 12 11⁄4" flange diameter Fits HUSKY 288 & 394 Note: It will fit under the stock cover. 2695 2295 2195 835 575 525 #K&N 1 #UNI 1 Small white foam Fits HUSKY 266, 288, 2101 (066 needs cover plate) STIHL 044, 046, 066, 088 2095 “The Pro’s Choice” 79 Master Saw Repair Page Faller's Dawgs LOCTITE is a pro-saw user’s friend. It will reduce down time more than anything else we sell. We use both types in our shop. LOCTITE #242 THREAD LOCKER: • helps hold screws which attach shrouds • is good for holding delicate screws • is best if you plan to disassemble at a later date FALLER'S DAWGS are laser cut from heat treated alloy steel. They are designed to be used in matching pairs. Their large tooth design works great for gripping deep or rough bark. The point positions are also designed to maximize leverages with long cutting attachments. Pictured left: This dawg is the outside dawg for a HUSQVARNA 395. It fits on the outside of the bar cover and is mounted on the bar studs like the factory dawgs. The inboard dawg mounts on the main case on the factory mounting points. LOCTITE #271 STUD & BEARING MOUNT : • helps hold main bearings to case mounts • helps hold bar studs & dawg bolts in place • should be used when installing TIME-SERTS Tip: When disassembling a component that was assembled with #271, heat the fasteners to release the bond. Price is for either #242 or #271. Please specify which type you want when ordering. List 1295 1-9 995 MADSEN’S 10+ 950 We carry them for current models of STIHL and HUSQVARNA falling saws. Most dawgs are $15 to $20 each. Please specify what model saw you are fitting when ordering. Thread Repair Kit We repair stripped threads in our shop with TIME-SERTs. We prefer them over other thread-repair systems because they are a solid-bushing thread insert. Their thin walls have synchronized internal-external threads and make an excellent repair. They are also easy to install and lock into place. Each kit contains a drill, counter-bore, cutting tap, & insert driver. When ordering a kit, please also order inserts. For Saws For Component Repair 4mm X .8 STIHL oil pump & ignition screws 5mm X .8 STIHL HUSKY most buffers & housing screws most housing screws 6mm X 1 STIHL buffer mounts, cylinder bolts 8mm X 1.25 STIHL small block bar studs on most models 14mm X 1.25 STIHL spark plug 80 MADSEN’S PRICE Size X Thread Pitch Kit Price 6860 6120 Call 5760 6120 12140 Inserts 110 ea 110 ea 110 ea 110 ea 220 ea (360)736-1336 24 hours Master Page l Saw Repair Heat Shrink Tubing Lubricant TRI-FLOW is a high-grade oil that contains micronized teflon, a corrosion inhibitor, a moisture displacer, and a special solvent. It penetrates inaccessible areas to clean and lubricate. It even breaks down the crystalline structure of corrosion. Spencer recommends TRIFLOW for use in their tapes. Customers report it also works well on guns, in fishing reels, and in other mechanisms that require light oil. List 19 1-11 12 60 MADSEN’S 12+ 95 List 350 1-9 275 MADSEN’S 10+ 225 1195 NGK Spark Plug #BPMR7A SPARK PLUG works in most models of STIHL & HUSKY saws. It is a high-quality resistor type plug with an extended tip. It also has a solid top, that doesn't vibrate loose. List 480 1-9 385 MADSEN’S 10+ HEAT SHRINK TUBING can easily repair damage to the insulation on a saw's wiring. Simply place the tube over the exposed wire, then gently apply heat. The tubing will shrink and grip the wire making a new layer of insulation. This repair is less bulky and more durable than electrical tape. The quantity is one 12" section. #HS-12 310 Black Electrical Tape BLACK ELECTRICAL TAPE is a timber faller’s fix-all. In addition to electrical repairs, it can be used to finish the day when it is necessary to tape sticks to broken handle bars and so on. List 325 1-9 109 MADSEN’S 10+ 99¢ Pro Safety Handle Bars PRO SAFETY HANDLE BARS are made of light-weight and durable alloy material. They fit in the factory positions and come with rubber handle grips. Please ask about mounting screws for your application. Made In USA MADSEN’S PRICE 12650 “The Pro’s Choice” 81 Master Page Saw Repair Starter Rope STARTER ROPE is made of nylon and features a multi-carrier outer braid and special core for strength. This is unique design resists fraying and wear on starter bushings. The rope is strong, yet flexible. It is made in Germany. MADSEN’S PRICE 164’ roll of 3.5mm (#4.5) 164’ roll of 4.5mm (#5) Octane Booster T K - 7 O C TA N E B O O S T E R works great in today's high performance chain saws. When pump octane is too low, add this for more octane. Bottle size is 10 ounces. 2235 2385 List 2195 1-5 1595 MADSEN’S 6+ A 3.5' section in either size is $2.50. 1495 Sprocket System The FLOATING RIM SPROCKET SYSTEM is the ultimate drive sprocket. It allows the chain to align perfectly with the groove in the bar through the use of a precision rim that “floats” on a splined hub. Also, if the chain derails, the spline does not destroy the chain's drive links. The system is easy to install and is available to fit most chain saws. Replacement Rims REPLACEMENT RIM SPROCKETS for the above system are available in 3⁄8" X 7, 3⁄8" X 8, and .404" X 7. Please specify pitch and tooth count when purchasing. List 620 1-9 495 MADSEN’S 10+ Call us for the price of a system that fits your saw. 445 High Tooth Count Racing Sprocket PIN DRIVE RACING SPROCKETS are available in tooth counts from 8 to 16 and in 3⁄8, .404, and 1⁄2 pitch. They can be spline bored to fit OREGON clutch hubs or straight bored with standard keys. Racing sprockets are made of heat treated alloy steel. Tip: These do not work well on production saws. 82 Call MADSEN’S PRICE 3⁄8 x 9 pin 3⁄8 x 10 pin 404 x 8 pin 404 x 9 pin 2390 2560 2710 2920 (360)736-1336 24 hours Saw Repair Master Page Carb Adjustment Screwdriver The CARB ADJUSTMENT SCREWDRIVER has a thin blade and a long shank that fits the adjustment screws on most saw carburetors. It also features a magnetic-end and a handy pocket-clip. Epoxy Repair Kit QUIK STEEL is an epoxy repair that is resistant to gas, oil, and water. It is good for fixing fuel tanks damaged by thrown chains and so on. MADSEN’S 195 List 865 1-5 650 MADSEN’S Digital Engine Tach 6+ Engine RPM is easy to measure with this battery powered DIGITAL TACHOMETER. Carb adjusting becomes simple -- just turn the adjustment screw, watch the tach, and set the desired RPM. On saws, RPM measurement is accomplished by pointing the unit near the spark plug wire. The unit picks up the spark pulses and counts them with its built in micro-computer. It quickly calculates the amount of sparks that will occur in a minute and displays the number. MADSEN’S PRICE A repair kit contains two tubes -- one is an epoxy paste and the other a hardening compound. When mixed together, the blend hardens, setting up in fifteen minutes and fully curing in one hour. Item# 210-172 9995 Combination Spark Plug & Bar Wrench C O M B I N AT I O N B A R List 425 WRENCHES fit most European MADSEN’S saws. We stock a large inventory 95 of many different styles. Please 1-9 specify type and version when 10+ 345 ordering. 3 595 “T” Handle Allen Wrenches • The 3mm size is used for removal of oil pumps and some ignition components. • The 4mm size fits many standard exterior components on HUSKY and older STIHL saws. • The 5mm size is used for cylinder removal on older STIHL and some mounting components. • The 3⁄16" size is used for cylinder removal on older HUSKYS and some mount components. List Price 595 290 MADSEN’S “T” Handle Torx Wrench The TORX WRENCH fits most fasteners on late model STIHL saws. List Price MADSEN’S 1225 985 “The Pro’s Choice” 83 l Alaskan Master Page Saw Mills Alaskan Saw Mill How an Alaskan Saw Mill Works Now you can make your own valuable, smooth, and ready to use dimensioned lumber. Mill trees where they fall and produce boards of any thickness -- from half an inch to thirteen inches and any desired length. The ALASKAN SAW MILL is a portable mill attachment that clamps to the chainsaw bar. It is best to buy the biggest mill that you think you will ever use because the mill will adjust down to accommodate shorter bar lengths. It is best to power this mill with one or more large chain saw engine. Size Maximum Cut 24" Alaskan Mill G-776-24 20" 30" Alaskan Mill G-776-30 26" 36" Alaskan Mill G-776-36 32" 48" Alaskan Mill G-776-48 44" 56" Alaskan Mill G-776-56 52" 60" Alaskan Mill G-776-60 56" 72" Alaskan Mill G-776-72 68" The MINI-MILL is an economical milling device for producing lumber from smaller logs. It should be powered with a medium sized power saw. It can be used along with the MK II for squaring logs and edging slabs to increase production. It comes complete with 12 feet of guide rail in 2' lengths. 84 Description MADSEN’S 18900 19900 21900 24900 26900 28900 31900 Mini-Mill #G-555B MADSEN’S PRICE Extra “v” rail 2’ Call 9900 550 (360)736-1336 24 hours Alaskan Saw Mill Accessories Master Page Auxiliary Oiler The OILER ASSEMBLY consists of a tank, mounting bracket, clamps, valves, and tubing. Proper oiling results in greater chain life and increased production. #G-801 MADSEN’S PRICE 4750 Helper Handle The HELPER HANDLE is available with an idler ro l l e r f o r u s e w i t h double end bars, or without for standard bars. It is made of heavy die cast aluminum for light-weight and extra durability. With roller #G-975 MADSEN’S PRICE Without roller #G-971 MADSEN’S PRICE 8550 4450 Slabbing Rail Brackets SLABBING RAIL BRACKETS ensure a mill's initial cut is smooth and level. They are used to attach two straight 2X4's to the top of a log. This supports and guides the saw mill. Subsequent cuts do not use slabbing rails, but are guided by the smooth and level surface they helped create. #G-850 MADSEN’S PRICE 3350 Double End Chain Saw Bar The DOUBLE END BAR is made for use with two power heads or a helper handle with idler roller. Available in lengths: 44", 50", 56", 66", 72", 84", & 96". Call for price and availability. Long Mill Support Kit The LONG MILL SUPPORT KIT is an additional cross-support intended for use on mills 48" and wider. Adding one or more of these supports helps stiffen the mill and is especially beneficial to long-spanning rail supports. #G-850 MADSEN’S PRICE 3650 “The Pro’s Choice” 85 l MasterSaw Chain Page Winch A LEWIS WINCH is great for moving small logs for firewood. Hunters like it for dragging big bucks or for pulling out a truck out that is stuck in the mud. The winch has hundreds of uses because it can be taken anywhere you can take a chain saw. Pulling capacity depends on the size of saw you use for power, but maximum pull is about 4000 lbs. We recommend mating the winch to a mid-sized saw. The engine should be at least a three cubic inches (or 50 cc). This combination will pack a lot of power in a small spot, because like a chainsaw, a Lewis winch is made of lightweight components. This saw and winch combination weighs 47 lbs and is 33 inches long. The power head is a Husqvarna 365 which has a 65cc engine. Also shown is the tri-sided hand knob. This knob is used to disengage the winch for free-wheeling. List Price 112900 MADSEN’S PRICE 89900 A Tree Saver Winch Strap is $6250. A Snatch Block is $6950. The winch mount shown couples directly to the saw’s clutch drum. Some saws have external clutches that prohibit this type of mounting. If a saw has an external clutch, the winch is mounted using a small bar and chain which is included. 86 The price includes 150' of 3/16" aircraft cable, so all you need is a spare powerhead. Assembly, installation on your saw, or spooling the cable onto the reel is extra. This is a job you can probably do yourself, but if you would like help setting it up for the first time, we simply charge for the amount of shop time required. Call (360)736-1336 24 hours Chain Saw Attachments Master Page Chain Saw Rope Winch A SIMPSON CAPSTAN ROPE WINCH is a great tool for hauling, dragging, or lifting. It turns any small chain saw into a rope-pulling machine. Rope isn't as strong as cable, but it is flexible, light-weight and safer to use. Rope is usually more readily available and can be knotted or tied. With a capstan style winch, you're not limited to the length of cable that a drum will hold. Drum type winches also lose pulling power as the drum fills with cable - not the case with a capstan winch. A Simpson winch weighs only nine pounds and easily attaches to most small chain saw powerheads. With a three cubic inch saw engine the winch will achieve its maximum pull of about 2000 lbs. The price does not include rope or powerhead. MADSEN’S PRICE 84900 A 300’ roll of 5/16” double braided rope with 4200 lb tensile strength is $15900. To install a Simpson winch on a chainsaw powerhead, simply remove the cutting attachment from the powerhead and bolt the winch in its place. An adapter and cutterless chain are supplied to replace the saw's cutter chain and bar. Two wing nuts secure the adapter and saw to the winch. That's all there is to it. Log Wizard List Price 24900 MADSEN’S PRICE 19950 The LOG WIZARD has ball bearings on the rotor for long life and uses standard 3 1/4" planer blades for easy replacement. It comes with a universal spline that can accommodate any pitch sprocket. To install it on a saw, simply fit it up, drill two mounting holes in the bar, and fit up a chain. A slightly longer chain is required to drive the rotor. The Log Wizard is an excellent farm or construction tool. It can be attached to almost any size or model chain saw. When attached to your saw, it can be used as a debarker, router, notcher, or planer. A Log Wizard is an essential tool for pole barn construction, for fencing, or for log home building. It is unbeatable for smoothing knots or fitting beams. The price does not include the saw, bar, or chain. Made in Canada. “The Pro’s Choice” 87 l Chain Saw Guide Bars Pro Chain Saw Guide Bars Listed are our most popular bars for STIHL® and HUSQVARNA® chain saws. Please call if the you need a bar that is not listed. These prices reflect our cost at printing time, actual prices may vary. Also, we offer discounts on box quantities. Call for prices and more info. For Saw Type Part# Gauge List Stihl® 361-660 20_RNDD025 20" Painted Pwr Mtch .050" or .063” 24_RNDD025 24" Painted Pwr Mtch .050" or .063” 28_RNDD025 28" Painted Pwr Mtch .050" or .063” 28_RWDD025 28" Reduced Weight .050" or .063” 30_RNDD025 30" Painted Pwr Mtch .050" or .063” 32_RNDD025 32" Painted Pwr Mtch .050" or .063” 323PMDD025 32" Polished Power Match .063" 32_RWDD025 32" Reduced Weight 343RNDD025 34" Painted Power Match .063" 343RWDD025 34" Reduced Weight PM 363RNDD025 36" Painted Power Match .063" 363RWDD025 36" Reduced Weight PM 423RNDD025 42" Painted Power Match .063" Slot Width: 12.1 mm or .425” 88 Length Description .063" 6688 8202 9444 15698 10069 10662 12477 .050" or .063” .063" MADSEN’S 16907 11258 17308 11559 17555 13397 5050 6150 6850 13850 7250 7550 8950 14850 8050 15250 8250 15550 9550 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ST-2863 28" Superbar .063” ST-3263 32" Superbar .063” ST-3463 34" Superbar .063" ST-3663 36" Superbar .063" ST-4163 41" Superbar .063" ST-5063 50" Superbar .063" Call 14084 15486 16225 17457 22494 34667 12750 13750 14650 15450 19750 30950 (360)736-1336 24 hours Chain Saw Guide Bars For Saw Type Part# Length Description Gauge Stihl® 075-880 SB-3363 33" Superbar .063" SB-3663 36" Superbar .063" SB-4163 41" Superbar .063" SB-5063 50" Superbar .063" SB-6063 60" Superbar .063" SB-7263 72" Superbar .063" Slot Width: 14 mm or .553” List MADSEN’S 16225 17457 22141 34667 41671 48905 14620 15450 19750 30950 37950 43950 –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Husky 372-3120 200RNDD009 20" 6688 Painted Power Match .050" 24_RNDD009 24" Painted Pwr Mtch .050" or .063 28_RNDD009 28" Painted Pwr Mtch .050" or .063 28_RWDD009 28" Reduced Weight 300RNDD009 30" Painted Power Match .050" 32_RNDD009 32" Painted Pwr Mtch .050" or .063 32_RWDD009 32" Reduced Weight 343RNDD009 34" Painted Power Match .063" 363RNDD009 36" Painted Power Match .063" 363RWDD009 36" Reduced Weight PM 423RNDD009 42" Painted Power Match .063" Slot Width: 9.0 mm or .375” .050" or .063 15698 10662 16907 11258 11559 17555 13397 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– HU-2863 28" Superbar .063” HU-3063 30" Superbar .063” HU-3263 32" Superbar .063” HU-3363 34" Superbar .063" HU-3663 36" Superbar .063" HU-4263 42" Superbar .063" HU-5063 50" Superbar .063" HU-6063 60" Superbar .063" 9444 10069 .050" or .063 .063" 8202 5050 6150 6850 13850 7250 7550 14850 8050 8250 15550 9550 14084 14685 15486 16225 17457 22494 34667 41671 12750 13250 13750 14650 15450 19750 30950 37950 72" & 84" Cannon bars for big Husky saws are available. Call for price. “The Pro’s Choice” 89 l Replacement Bar Noses Replacement Sprocket Noses We carry a full line of REPLACEMENT NOSES for your guide bars. Below are our popular sellers. We also carry other brands and types not listed here. If you don't see the tip you need, please call. Our inventory includes many obsolete and hard-to-find items. MADSEN'S PRICE Type Style Pitch 1-5ea 3/8" or .404" 1595 1495 .3/8" or .404" 1395 1295 3/8" or .404" 1495 1395 .404" 1995 1895 9995 9495 #537245 For Harvester Bar 6+ea 3/4" #40603 For Harvester Bar Rivets for securing the tip to the bar are included with the replacement tips listed above. If you need extra rivets, let us know. We carry a full inventory of most styles. Please specify the type of bar tip. Bar Tip Grease Gun Some bar noses come with lubrication holes. This allows you to grease the nose bearing with a BAR NOSE GREASE GUN. This gun is palm operated and features a special needle tip. The gun is filled by packing with a high quality bearing grease. List Price MADSEN’S 90 1395 865 Small tub of grease (1 lb) Call 395 (360)736-1336 24 hours Harvester Bars & Chain Harvester Bars We carry a full line of harvester bars to fit popular harvesting machines, including bars not listed here. Call for more information if you don't see the bar you need. Also, call for a quote if you are ordering five or more bars. We offer discounts on purchases of box quantities. Brand Length Part # Gauge Pitch Oregon® 19" 592RHFL104 69 .080 .404 Oregon® 21" 642RHFL114 74 .080 .404 Oregon® 25" 752RHFL114 85 .080 .404 Oregon® 25" 752RHFN114 85 .080 .404 Oregon® 28" 822RHFL149 93 .080 .404 Oregon® 30" 902RHFL114 104 .080 .404 Oregon® 341SNCT043 55 .122 3/4 Oregon® 361SNCT043 57 .122 3/4 Oregon® 381SNCT043 60 .122 3/4 Oregon® 431SNCT043 66 .122 3/4 All harvester bars listed have replaceable sprocket noses Link Count List 8005 8255 8971 8971 9810 10431 38097 39093 39322 42284 MADSEN’S 7450 7650 8350 8350 9250 9750 33900 34900 35900 37900 Harvester Chain We carry a full line of harvester chain. Call us for a price or if you need a chain not listed here. Type #11H #11BC #18HX Pitch 3/4" 3/4" .404" Gauge .122" .122" .080" Tooth Cutter micro-chisel round chipper round micro round Sequence Price# standard standard standard Call for a Price IMPORTANT INFORMATION - WARNING • All chain listed above is for harvesting machines only and should NOT be used on a hand-held chain saw in any conditions. It is too aggressive, has a high-kickback rating, and too dangerous for hand-held use. This includes experienced professional saw users. “The Pro’s Choice” 91 l Info on Saw Chain MADSEN’S is the largest Oregon® dealer for square-ground professional saw chain in North America. Our volume allows us to keep a large inventory of chain, which insures we have the style you need, when you need it. Better yet - our buying power allows us to maintain the most competitive prices in the industry. Chain Loop Pricing. If you prefer to buy chain by the loop, ask about our two-for-the-price-of-one deal. With this deal, you get two loops for one price. If you need two different chains, pay the two-for-one price for the most expensive one and get the second one free. We offer this on most saw chain, even harvester chain. Even long chains qualify. Need a couple chains for your 60" bar? No problem. Just ask for the two-for-one deal and save. Chain Loops at Bulk Pricing. Buying chain by the roll saves money. The problem with bulk chain is you may not have the tools for cutting and splicing - and if you have he tools, you not have the time to cut and splice. Whatever the case, we can help. If you like bulk prices, but prefer to get looped chain, we will cut them for you from your roll for $2.50 per loop on most types. You can't beat a deal like this. One thing to remember is when we cut bulk chain into loops for you, the chain is not returnable, so be sure you tell us the correct link count for the loops you want when you order. Chain Reel Pricing. We don't print prices in this guide because chain prices fluctuate. We've been buying chain for years and have learned to buy a ton of it when the price is low. When we make a good buy on chain, we pass the savings to you. So keep an eye out for one of our sale flyers in your mail box. Also, watch for our ads in Logger's World Magazine. Need to know the price today? Give us a call.... You’ll be glad you did. Service. MADSEN’S specializes in the needs of professional chain saw users. We can help you select, maintain, and maximize the performance of your professional saw chain. We are chisel chain experts and can help you set up your grinder or answer your questions about high performance saw chain. We are also available to answer questions about saw chain safety, kickback ratings, and so on. Give us a call or stop in. We are always happy to help. 92 Call (360)736-1336 24 hours Pro Saw Chain Professional Saw Chain The listings below for best engine size and best bar length are only general suggestions. What really matters is your application, which may call for a different size or type. Please call for more information or if you have questions. Professional saw chain is our business. We can help. Chain Pitch Gauge Type Tooth Type Cutter Grind #91VXL 3/8" Low #95VPX .325" #20LPX .325" #22LPX .325" #72DPX 3/8" #72LPX 3/8" #72LGX 3/8" #72JGX 3/8" #72JPX 3/8" #72CL 3/8" #72CK 3/8" #72CJ 3/8" #75DPX 3/8" #75JGX 3/8" #75CL 3/8" #75CK 3/8" #75CJ 3/8" #27AX .404" #68CL .404" #68CJ .404" semi-chisel semi-chisel chisel chisel semi-chisel chisel chisel chisel chisel chisel chisel chisel semi-chisel chisel chisel chisel chisel micro-chisel chisel chisel round round round round round round round round round square square square round round square square square round square square .050" .050" .050" .063" .050" .050" .050" .050" .050" .050" .050" .050" .063" .063" .063" .063" .063" .063" .063" .063" Chain Best Saw Configuration Engine Size standard standard standard standard standard standard standard full-skip full skip standard semi-skip full-skip standard full-skip standard semi-skip full-skip full-skip standard full-skip 30 to 35cc 30 to 35cc 45 to 55cc 45 to 55cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 65 to 100cc 80 to 120cc 80 to 120cc 80 to 120cc Best Saw Bar Length 14" arborist saw 14" arborist saw 16" to 20" 16" to 20" less than 32" less than 32" less than 32" 28” to 36" 28” to 36" less than 32" less than 32" 28” to 36" less than 32" 28" to 36" less than 32" 28" to 36" 28" to 36" 32" and up" 28" to 36" 32" and up IMPORTANT INFORMATION - WARNING • All saw chain listed above should only be used by experienced chain saw professionals with experience and special training for dealing with kickback. Professional saw chain is aggressive and has a high kickback rating. None of it is ANSI approved for use on saws less than 3.8 cubic inches (62 cc). • Chains and bars designed to minimize kickback are available. These meet ANSI standards and should be used on saws with engines less than 3.8 cubic inches (62 cc) or on any saw that is consumer directed (nonprofessional use). Please contact us for more information. “The Pro’s Choice” 93 l Chain Repair Tools Break-N-Mend The BREAK-N-MEND is a handy tool for doing chain repairs on the job. When you carry this tool in the crew bus, you can repair or shorten saw chain right in the field. It is also handy for making up new chains from a reel. No work bench or extra tools are required. Its adjustable anvil section and spinner head will accommodate saw chain from ⁄4” to .404” pitch. 1 List Price MADSEN’S The POCKET CHAIN BREAKER is our least expensive chain breaker. This punch and anvil set is a must for every home saw repair bench. The anvil has a number of slots for accommodating ⁄4”, low profile ⁄8”, .325”, ⁄8”. and .404” pitch saw chain. The anvil must be used on a solid surface. A hammer is also required.If you have a bench grinder, it is helpful to remove part of the rivet head prior to punching with this tool. This makes it much easier to punch out the rivets. 1 3 3 List Price 5895 46 Chain Breaker MADSEN’S 95 Bench Mount Chain Breaker The BENCH MOUNT CHAIN BREAKER is what we use to break chain in our shop. It works on most sizes of saw chain from ⁄4” to .404” pitch, including harvester chain. 1 1795 1165 Bench Mount Rivet Spinner The BENCH MOUNT RIVET SPINNER is used to join saw chain. The spinner makes a strong joint by shaping rivet heads on pre-set tie straps. Included is the spinning head necessary for riveting most types of ⁄8” pitch saw chain. Ask about other chain sizes. This is a complimentary tool to the bench mount chain breaker shown on the left. 3 Mount this on your work bench and mark the link counts you cut most often. If you make up a lot of chains or do a lot of repairing, you will wonder how you ever got along without it. List Price MADSEN’S 8395 List Price 5995 MADSEN’S Replacement Punch Bit 5995 Replacement Spinner Bit New Style Old Style New Style Old Style Item# 38594 Item# 26870 Item# 38597 Item# 26889 5 94 8395 50 10 5 95 Call 50 835 (360)736-1336 24 hours Chain Sharpening Tools Clamp-on Filing Guide 12 Volt Electric Chain Sharpener The ELECTRIC SAW CHAIN SHARPENER offers speed and convenience. This 12 volt grinder is meant to be attached to a car, truck, or ATV battery for easy chain sharpening in the field. Bit sizes are available in 5⁄32”, 3⁄16”, 7⁄32”, and 1⁄4”. Item# 28588 With the PROFESSIONAL FILE GUIDE, you don’t have to remove the saw chain from the bar to sharpen it. With a few twists of the thumb screw, this guide clamps on the cutting attachment and accurately holds filing angles you select. It is adjustable on each axis and will fit file sizes from 5⁄32" to 7⁄32". A file is not included. Item# 557849 List Price MADSEN’S List Price MADSEN’S 8188 5895 Extra Grinding Bits 345 5496 3595 Round File Guide Depth Gauge Filing Tool You know how important it is to have a smooth, fast cutting chain. It's also important that the chain cut straight. All of this is impossible if the rakers are not properly maintained. The PRESET RAKER GAUGE helps you file your rakers to the correct height. It is available in .025" or .030” List Price MADSEN’S 400 275 The FILE GUIDE helps maintain the optimum sharpening angles when hand filing. It is especially helpful in keeping the file at the correct height. The guide is good for both a beginner or experienced filer who touches up his chain in the field. Each guide comes with a file. Please specify size when purchasing: 7/32", 3/16", or 5/32". List Price 1339 MADSEN’S 995 “The Pro’s Choice” 95 l Chain & Bar Tools Bar Rail Closer 110v Electric Saw Chain Grinder The ELECTRIC SAW CHAIN GRINDER is a round chain grinder built for saw users who sharpen many chains. It is easy to use and can sharpen 1⁄4”, .325”, 3⁄8”, and .404” round saw chains. Item# 180-119. The SILVEY BRC works quickly and easily on worn or spread bar rails. It's fully adjustable and will work on bars of any size. The heavy duty ball bearings used on the BRC insure accuracy and long wear. Made in the USA. MADSEN’S 2995 The grinder comes boxed and ready to assemble. Once assembled, it easily bolts to a bench or stand and plugs into a standard 110v outlet. . List Price Item# 180-119 Grinders & Tree Jacks Parts & Service MADSEN’S 42995 33900 110v Electric Saw Chain Grinder The OREGON E L E C T R I C S AW CHAIN GRINDER is a round chain grinder built for saw users w h o s h a r p e n 1⁄ 4” , .325”, 3⁄ 8”, and .404” pitch round saw chains. If you are looking to sharpen 3/4" pitch harvester chain, contact us for more information. At this time, Silvey is not producing new grinders or tree jacks. However, they are still producing parts, and Madsen's has a good inventory of them. So if you need parts or repair on a Silvey product, contact us. For an additional $39.95 we will assemble this grinder and give you up to one hour of personal instruction in our shop on how to use it. This is suggested if you are new to grinding saw chain. List Price Item# 520-120 MADSEN’S 96 Call 61695 39900 (360)736-1336 24 hours Simington Square Chisel Chain Master Grinder Page ll Simington Chisel Chain Grinder The Simington S451-C is a square-chisel chain grinder suitable for both an experienced grinder operator or a beginner. This grinder is based on a simple swing-arm design, which makes it easy to use, adjust, and maintain. It is also time-tested. Some grinders, still in use today, have been sharpening saw chain for over thirty years. Today's S451-C is the newest generation of this popular machine. Its features include: • Adjustable cutter-tooth sharpening angles • Reversible fan-cooled 110v motor • Carbide-tipped tooth locator • Two diamond-tipped wheel dressers • Die-cast aluminum chassis and swing-arm • Flex-mounted work light with standard socket • Three-point adjustable tripod stand included • Made in U.S.A. List Price MADSEN’S 1079 Simington S451-C Square-Chisel Chain Grinder 95 99900 #1 Above: Aligning the corner in the grinding wheel with the corner in the cutter tooth is one of the secrets to producing well sharpened square-ground cutter teeth. The level of precision necessary to maintain this alignment with a hand file is difficult to achieve. With a grinder it is easy, and this is one reason professional saw users sharpen square chisel chain with a grinder. #2 Above: Adjuster #1 changes the grind angle to keep from cutting into the chain's chassis under the hood of the cutter. Adjuster #2 changes the inside sideplate angle by lengthening (or shortening) the arm's swing. Additional angle adjustments can be made by changing the shape of the grinding wheel, which is accomplished by changing the paths of the two diamond dressers, which are also adjustable. “The Pro’s Choice” 97 Master Fire Pump Page Grinding Wheels for Chisel Chain Grinders These grinding wheels are for sharpening square-ground chisel saw chain. The characteristics listed represent the collective opinion of our customers and staff. All wheels are 8" X 1" X 3/16". If your grinder does not have a 1" arbor, see the listing for adapter bushings on the next page. Part Color Hard/Soft Bond Grinding Wheels for Chisel Grinders: Bond Type Grit Size MADSEN’S PRICE 1-9 ea 10+ ea 1795 #M21 grey medium-soft vitrified 120 1650 • This wheel dresses easily and removes material quickly. It doesn’t hold its shape as well as harder wheels, but It remains one of our best selling wheels. 1895 1750 #M21W grey waxed medium-soft vitrified 120 • This wheel is similar to the wheel above, but it is impregnated with wax for lubrication and cool grinding. Like the wheel above, it produces a good finish on cutter teeth, but it is not as popular. 1795 1650 #M47 salmon medium vitrified 100 • This wheel shapes and finishes cutter teeth well. It doesn’t remove material as fast as softer wheels above. It is also one of our best selling wheels. 1795 #M50 white medium vitrified 100 1650 • This wheel is similar to the wheel above. Some grinder operators say its white color makes it easier for them to see the corner in the wheel, which improves their ability to align corners. 1895 #M49 brown medium resinoid 80 1750 • This wheel removes material easily and quickly, however it doesn’t finish or shape as well as others. It is a good wheel if you have to grind a lot of chains each night or if you regularly sharpen rocked chains. 3995 3650 #M99 blue medium vitrified 100 • This is our only ceramic blend wheel. It keeps its shape and finishes cutter teeth very well. It is an excellent wheel and many grinder operators prefer it, but it is also the most expensive. Grinder Accessories Part Description regular socket light bulbs tube grinding wheel wax single-point diamond tipped dresser multi-point diamond tipped dresser wheel dressing brick 98 List 250 1295 3495 3495 2550 Call MADSEN’S 195 1050 2895 2895 1795 (360)736-1336 24 hours Files Other Grinding Wheels Listed below are our best selling grinding wheels, but we carry other wheels including many Silvey OEM wheels not listed. If you have an older Silvey or Oregon chain grinder not shown, we can probably supply you with a replacement grinding wheel. Please ask for help if you need assistance choosing a wheel for your grinder. Part Description Grinding Wheels for Round Grinders: Bond MADSEN’S PRICE 1-9 ea 10+ ea 1795 #M45 for most round grinders vitrified 1650 • This wheel is 6" X 1" X 3/16". It works for most .325”, 3/8” and .404” pitch round chain. It is a coarse grit wheel and will remove dull material with minimal burning. 1795 1650 #M32 for most round grinders vitrified • This wheel is similar to the wheel above, but sized 6" X 1" X 1/8". This thinner wheel works for most low profile 3/8” and 1/4” pitch round chain. 1595 1450 #M316 for an OREGON or EFCO round grinder vitrified • This wheel is 5 3/4” X 7/8” X 3/16”, the best size for sharpening 3/8” chain on these grinders. We also stock them in 1/8”, 1/4” and 5/16” for sharpening other size chains. Please call for more information. 1895 1750 #M832 for a SILVEY 510 round grinder resinoid • This wheel is 5/32” thick, a good size for sharpening 3/8” chain on this grinder. We also carry these in 1/8” thickness for sharpening low profile 3/8” chain and .325”. Please call for more information. 1895 #M49 for a SILVEY 510 round grinder resinoid 1750 • This wheel is 8" X 1" X 3/16". It works great for grinding 3/8” or .404” pitch round saw chain or .404” harvester chain. It also works on the SILVEY #510-080 harvester chain grinder. 2695 2550 #M516 for a SILVEY P & D grinder resinoid • Similar wheel to the #M49, but 5/16" thick, the best size for sharpening 3/4" pitch chain; It is good for sharpening chain for both pond & deck saws or for 3/4" pitch harvesters. Grinding Wheels for Depth Gauge Grinders: #SG6 for a SILVEY HDG-6 resinoid • This wheel is made especially for the HDG-6 grinder. It's size is 6" X 1" X 3/16". Grinding Wheels for Bar Rail Grinders: 1595 1450 1995 #BR312 for a SILVEY Bar Rail Grinder resinoid • This wheel is made especially for the SILVEY BRG grinder. It's a special 3.5" cupped wheel. The Nielsen, Bell, Stihl, and some other grinders have a 1⁄2" arbor. Most of the wheels listed on these pages have a 1" diameter arbor hole. A bushing is necessary to use one of these wheels on a grinder with 1⁄2" arbor. Cost is only $2 and it is reusable. “The Pro’s Choice” 99 l Master Grinding Chisel Page Wheels & Accessories Chain Saw Files MADSEN’S carries premium grade files made in Europe by Viiala. Premium grade files may cost more, but they deliver excellent value because they cut well and last a long time. Size - Type - Description 5/32", 3/16", 13/64", & 7/32" round chain or gullet files 5/16" round file for 3/4" pitch (#11BC) P & D or harvester 7" premium three corner chisel chain file 7" premium double bevel chisel chain file List Price 1-11 ea 12-35 ea 36+ ea 249 125 115 1095 379 279 259 1219 979 879 829 1219 979 879 829 819 619 599 509 519 439 379 349 919 719 669 609 1229 929 829 759 6" premium goofy flat chain or general purpose file 6" premium flat raker or rider file 8" premium flat axe or general purpose file 10" premium flat axe or general purpose file MADSEN’S PRICE 319 125 69¢ 59¢ HI- IMPACT PLASTIC FILE HANDLES are made to fit the small tails on most chain files. They are tough and durable because they are made by the same folks that make Double Taper falling wedges. 100 Call (360)736-1336 24 hours Master Pumps Page Fire Pump The TOP FLOW FIRE PUMP is capable of pumping 22 gallons per minute through a 1/4" nozzle and 50' of 3/4" hose. This complies with Washington's Department of Natural Resources (DNR) and Oregon Department of Forestry (ODF) pump specifications for logging site fire protection. MADSEN’S PRICE 159995 This pump can be mounted to a tank trailer or be transported on a wheeled cart or mounting plate, which are both options. The pump features a Honda GX270 engine. This is a 270cc commercial-grade engine with a cast-iron cylinder for long-life and durability. It also features a 2" NPT inlet and a 1.5" NPT outlet. Options include a hand-primer pump and foot valve. These are necessary if the pump will be used to fill a fire tank from a creek or water source located below the level of the pump, such as when a pump is mounted to a trailer. Madsen's is an authorized dealer for HONDA pumps. We carry high-pressure pumps, volume pumps, deluxe pumps, economy pumps, trash pumps, and more. Please contact us for more information. Please read the owner’s manual before operating your Honda Power Equipment. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2000 American Honda Motor Co. Inc. HONDA Heavy Duty Trash Pump • Commercial OHV engine • Oil alert • Centrifugal, self priming • Full frame “The Pro’s Choice” 101 l Master Page HONDA Generators Professional chain saw users often have a need for portable electrical power. A HONDA generator is a good source for using power tools, grinders, or lights. It improves the conditions on any work site. Which size is most common? Picking a generator can be tough because there are so many choices. Here are few suggestions: • Need to run a few lights? A 1000 watt model will work great. It also comes with a built-in 12 volt battery charger. • Need to also run a SILVEY® chain grinder? You'll want one that produces at least 3000 watts. • Need to power everything above including a fully equipped camp trailer with an air conditioner? Consider a 6500 watt model. Call or stop in. We will help you choose the best generator for your application. What are watts? Most generators are rated by the maximum amount of power or watts they can produce. HONDA generators show this in their model number. For example, an EU1000 will produce a maximum of 1000 watts. • What are watts? Watts are: Volts X Amps. In other words, 110 volts X 4 amps = 440 watts. So if you don’t know how much power a particular appliance requires, look in the owner’s manual for the amps it needs to run. Sometimes this information can also be found on a tag on the unit. Once you know amps and volts, you can figure watts. • When selecting a generator, remember it's rated at its maximum output, but it will not perform at this level for long periods. Also, remember that power cords and plugs reduce the efficiency of any generator. This means if you figure you need 2500 watts, buy a 3000 watt generator. 102 HONDA Generator • Built-in battery charger • Oil alert • Super quiet • Electronic ignition What type generator is best? HONDA generators come in many sizes and styles. It can be confusing to choose one. Here are some things to consider: • Buy one that's a little bigger than you currently need. While weight and cost are important factors, there is no-such-thing as too much power. • Make sure it has the features you need. If you end up buying a less expensive, but louder unit and run in a campground, your neighbors won't like you. Spending a little extra to get a quiet model with more features gives you additional flexibility. If you need portable electrical power, a HONDA generator is the best solution. HONDA generators are quiet and efficient. Best of all, they are also reliable and easy-to-start. HONDA Generator • Oil alert • Super quiet • Fuel meter • Automatic idle • OHV engine • Electronic ignition • Heavy duty power Call (360)736-1336 24 hours Log Master Splitters Page Log Splitters OREGON, a brand you know and trust, now offers three log splitters. All feature fast cycle times and have built-in cradles, which make splitting wood quick and easy. With this selection, one is sure to meet your needs. 6-Ton The OREGON 6-ton log splitter is portable, economical, and powered by 120V electricity. It is good for working in an enclosed space like a barn or wood-shed and can be plugged into a regular 120V wall outlet. It has surprising power for its size and can split wood up to twenty inches in diameter. It features a separate hydraulic pump and valve, an automatic push-plate, and a built-in log cradle. Its solid wheels make it easy to move around. 120V/15 amps. Item The OREGON 22-ton and 28-ton log splitters are both powered by quality HONDA engines. Both are good for use around the home or farm, yet are powerful enough for heavy users. They both utilize 24" hydraulic cylinders, have autoreturn valves, and 2-stage hydraulic pumps. Both can be operated in either a horizontal or vertical position. They also come standard with stripper plates, a solid-steel foot piece, a beam lock, and a sturdy ground stand that supports the tongue when running the splitter. The 22-ton splitter is powered by a Honda GC190 engine. The 28-ton unit is powered by a Honda GX270, a larger and commercial grade engine. This engine gives the splitter more power and reduces its cycle times, plus it offers more durability and a longer working life. The 28-ton unit also features a larger ram and taller 4.80" X 12" tires. The tires greatly improve the splitter's towing capability. Price 40900 00 22-Ton Splitter 1749 00 28-Ton Splitter 2499 Log Catcher 6999 4-Way Wedge 22T 5599 4-Way Wedge 28T 5599 95 Cover for 22T & 28T 79 6-Ton Splitter 22-Ton $ 28-Ton “The Pro’s Choice” 103 l Master Pro SawPage Performance Tips How to Sharpen Oregon Square-Ground Saw Chain with a Chisel File The following information will help you learn how to sharpen square-ground saw chain with a chisel-file. Before you begin, know that square-filing takes practice and patience to develop, so be prepared to work through a learning curve. Square-ground saw chain is difficult to file, so don't give up if your initial efforts don't meet your expectations. One thing that can really help you learn to square-file is guidance from a mentor. If someone on your crew squarefiles, and his chains cut well, become his friend. Having hands-on help from someone with filing experience can shorten the learning curve. But, be careful who you select for a teacher. Don't allow a "socalled" expert confuse you with misinformation. Only accept guidance from someone whose own hand-filed chain performs well. Types Of Files Before you get started, you need to acquire a chisel-file or two. There are several types available. The most popular is the hexagonal or "triangular" chisel file as it is more commonly known. It does actually have six sides, but only three "corners" or filing edges. Other file choices include the doublebevel chisel-file and another called a "goofy" file. Both have just two corners for sharpening, but also have additional wide flat surfaces that can be used for lowering depth-gauges. If you are not sure what file to start with, our advice is to start with a triangular file. It is the smallest file and fits best into the throat of most 3/8" pitch cutter-teeth. Since it has three corners, it will also sharpen more cutter-teeth before it wears out than either the double-bevel or goofy file. Later on, you might try one of these. Since they are dual-purpose, they are good for carrying in your pack because you can do a lot of chain maintenance with just one file. For clarity, depth gauge maintenance is not done at the Shown is a triangular chisel file being used to sharpen square-ground chisel saw chain. 104 same time chisel cutter-teeth are being sharpened. It is often done in conjunction with cutterteeth sharpening, but always done in a second operation. There is no square-file that can sharpen and cut depth gauges at the same time. The image above shows a doublebevel chisel-file sharpening a square-ground cutter-tooth from the rear. The image below shows the same from a side perspective. Getting Set Up to File If you have a shop or garage area with a work-bench and a vise, this is a good place to sharpen for the first time. Clamp your saw and its guidebar in the vise. If you have a work light, position it on the cutter-teeth. Square-filing is often done in the field, but it is best to learn in conditions with good light and stable cutterteeth. Next, select a dull squareground chain that has never been resharpened. If you start with a chain that has been Call (360)736-1336 24 hours Pro Saw Performance Master Page Tips resharpened, it may have gullet material on its cutter-teeth that gets in the way of your file. Yes, this gullet material can be removed, but since you are new to this, this is a step to avoid because you already have plenty to learn. The other benefit of starting with a chain that still has a factory grind is you have the manufacturer's original shape and angles to follow. It is also helpful to have a second new and unused squarechisel chain to look at. This chain should be brand-new with factory-ground cutterteeth. If you have a question or doubt about what you are trying to accomplish, you will have this chain to refer to. Filing Cutting Direction You will notice in the illustrations that the file is positioned so it cuts going "into" the cutter-tooth. There are a few people who prefer to file in the other direction and this is OK. They do this so the hard chrome is "lifted" from the cutter-tooth and not driven into the file. They argue this method helps preserve expensive square-files. In practice, most filers cut going "into" the tooth. This is the d i re c t i o n w e re c o m m e n d because it cuts the cleanest edge on the cutter's chrome plating. A chisel cutter-tooth is usually sharpened with the file cutting while going into the cutter-tooth, although filing in the other direction is also acceptable. The Rules Before you begin, here is a summary of what you need to do: 1) The corner of the file must be aligned with the corner in the chain's cutter-tooth. 2) Along with corner alignment, sharpening angles in the cuttertooth must be maintained. 3) All the dull material needs to be removed. 4) Your results must be duplicated on every cuttertooth. Square Filing The First Time Begin by placing your chisel-file in the face of a cuttertooth. Determine which corner in the file will align with the corner in the cutter-tooth. The photos and illustrations here should help you do this. O n c e t h e c o r n e r s a re aligned, position the file on its other axis so the surfaces on the cutter-tooth match up to the file There are several different types of files used for sharpening square-ground saw chain. Shown here is the triangular chisel file and the double-bevel chisel file. surfaces. Once everything is ready, take a few strokes with the file. Next, remove the file and examine the cutter-tooth. You will see marks where the file has taken away steel. Make adjustments to your file stroke based on what you see. Proceed to sharpen the tooth until it has a sharp corner and looks similar to a new tooth on your reference chain. When learning to sharpen any chain (even round), it is important to know what a sharp tooth looks like. If you don't have an image in your mind of what you are trying to accomplish, you won't have good results. Some round-filers get by without really knowing what they are after, but this won't work for square-filers. One telltale sign of a filer's level of sharpening experience is how he determines if his chain is sharp. An experienced filer doesn't feel the corner of of a cutter-tooth with his thumb. He determines if it is sharp just by looking at it. The point here is: Learn what a sharp tooth looks like. Your eyes can be trained to tell you more than your thumb. Corner to Corner Alignment A big part of learning a new skill is learning what is essential. In the case of square-filing, corner alignment is that essential. Aligning the corner in the file with the outside corner in the cutter-tooth is the single most important objective. If you don't retain anything else written on these pages, remember this. continued on page 106 “The Pro’s Choice” 105 l Master Pro SawPage Performance Tips continued from page 105 Unfortunately, there is misinformation out there that some people try to follow. It contends that the outside corner in the cutter-tooth, the inside corner in the cutter-tooth, and the corner in the file all need to align. This is not true. The only corners that must align are the outside corner of the cuttertooth and the corner in the file. Now, if the corner on the file happens to align with the inside corner of the cutter tooth this is OK -- it is just not necessary. The point here is: The corners to Corner alignment is the most important aspect of sharpening square-ground saw chain. A corner of a chisel file should be aligned with plane (A) and point (B) the corner of the cutter-tooth. Contrary to what some may tell you, it is not necessary to align with the inside corner. See the image below. Shown is a square-filed cutter-tooth with a well aligned outside corner. This cutter will perform well. Notice that the file's corner was aligned with the cutter-tooth's outside corner, but not the inside corner. 106 focus on is the outside corner of the cutter-tooth and the corner in the file. duplicating cutter-teeth is difficult for even the most accomplished square-filers. Duplicating Sharp Cutter-Teeth All cutter-teeth need to be identical, because when they are not, each takes a different sized bite of wood. This causes a chain to chatter and vibrate. In addition, uneven cutter-teeth can cause a saw to cut crooked. Here's why: If you add up all the chips taken by the cutterteeth on the left and compare them to those taken by the right, they must be the same. If they are not, the cut will "pull" to the side with the teeth that remove the most wood. Congratulations, you have produced one sharp cuttertooth. It is now necessary to duplicate what you have done on the rest of your saw chain's cutter-teeth. If you were using a square-grinder, this would be easy because you would now set the stops on your grinder (which limit travel) and you would be duplicating squareground cutter-teeth with ease. With a file, it is more difficult because you have no stops to set. You must learn to do this by eye or with the aid of measuring tools. Beaking Some people count file strokes to quantify how much cutter-tooth material they remove. While this is better than nothing, it is not an accurate way to measure because each file stroke does not remove the same amount of material. A few paragraphs ago you read how important corner alignment was. The following may seem like a contradiction at first, but read on and you will learn a filing "secret." The rule is: Align the corner of the file with the corner in the cuttertooth, but if you are going to be off, (here's the secret) be low. Right-handed filers find it is easiest to sharpen left-hand cutter-teeth. If you are lefthanded, the opposite is true. Whatever the case, all file strokes are not equal and you must compensate for this. Do your best to make each tooth identical. Also, know that No human is perfect. This is especially true when "square" filing. So instead of trying for a perfect corner, aim a little low. Yes, you will create a small "side-beak" in many teeth, but cutters sharpened with a slight side-beak will still perform pretty well. If you aim for per- It is important that each sharp cutter tooth be the same on a saw chain. A chain with cutter-teeth filed at different angles and at different lengths will chatter and may not cut straight. Call (360)736-1336 24 hours Pro Saw Performance Master Page Tips fection and end up with high corners on some teeth (a top beak), your chain won't cut worth a darn. So, whatever margin of error you need to allow, make sure you never create cutter-teeth with top beaks. Shown is a cutter tooth with a sidebeak. Notice the corner is filed low in the tooth causing a shape in the upper part that looks like a bird's beak. Almost all square-filers produce a side-beaked tooth because a top-beaked tooth won't perform well and perfect corner alignment is difficult to achieve. Yes, there is a down side to creating cutter-teeth with small side-beaks and that is some loss in a chain's stay-sharp ability. This is because beaked corners are not as durable and those with perfect corners. They don't have as much support. This explains why filed chain often has less stay-sharp ability than chain that is ground. Most grinder operators can produce nearly perfect cutter-teeth because it is easy to get and keep corner alignment. Square Grinding vs. Square Filing The challenge of positioning the corner of the file in the corner of the cutter-tooth, holding the correct angles, and doing all of this while moving the file is difficult. Some describe it as " d e n t i s t l e v e l " p re c i s i o n . Sharpening with a square grinder is easier because the grinder holds both the cuttertooth and the grinding wheel in place (once it is adjusted correctly). It also helps you duplicate cutter-teeth. Stops limit travel, so its easy to duplicate the results of the first sharp cutter-tooth on all the rest. These advantages are why most users who sharpen with a squaregrinder produce chains that perform well. performance because they lift a cutter-tooth away from the wood. When a cutter-tooth can't get to the wood, it doesn't perform as well. The longer gullets get, the more they impact cutting performance. Fortunately, gullets are easy to remove with a round file. If you have access to a round chain grinder, this is an even easier way. As you can see from this perspective, a long gullet can get in the way of the cutter-tooth's sharp corner. A grinder that is properly set up holds the angles for you. It is also easier to maintain proper corner alignment. Gullets If you sharpen saw chain with a round grinder or round file, you may have never heard of a gullet before. The reason is this material is removed during regular sharpening. But with a square-ground cutter-tooth, a gullets forms from "left over" material left in the lower portion of a cutter-tooth after it is sharpened. This material must be removed in a second operation. Many pro saw users do not do this often enough because they don't realize how important it is. The arrow points to a long gullet that needs to be removed. This gullet should be no longer than 1/8". All cutter-teeth have built in "set." If you look at a cuttertooth with a long gullet from the top down, you may see the gullet extending beyond the working corner of the cuttertooth. Long gullets hurt cutting Another problem with gullets is they can make it impossible position a file correctly in the face of a cutter-tooth. This often occurs when you are trying to file a chain that was In this image, the gullet material has been removed. Some users prefer to leave a small gullet, and this is acceptable. continued on page 108 “The Pro’s Choice” 107 l Master Pro SawPage Performance Tips continued from page 107 previously sharpened on a square-grinder. When this happens it is necessary to remove the gullets before you can resharpen a chain's cutter-teeth. Depth Gauges Having well sharpened cutter-teeth is important, but a chain won't perform well unless its depth gauges are also set correctly. Unlike gullets, which are often not cut enough, many pro saw users cut depth gauges too much. This is usually done to compensate for teeth that are poorly filed, but this is a bad practice. Saw chain with low depth gauges doesn't perform well and is more dangerous to operate. On most OREGON saw chain, the recommended setting is stamped right on the depth gauge, so its easy to find if you don't remember it. Don't forget about depth gauge maintenance and don't over-cut them to make up for poorly filed cutter-teeth. Our Advice • Learn to sharpen saw chain with a round file before you try your hand at square-filing. Square or chisel-filing requires much more skill and precision, but the round-filing experience provides good basic skills. Once you can sharpen well with a round file, then try square-filing. 108 • If you do most of your sharpening with a square-file, consider having someone grind your chains after every two or three filings. A machine grind done by a capable operator will restore the correct angles, corner alignment, and tooth lengths. This makes the chain much easier to resharpen with a square-file. • If you occasionally sharpen your filed chains with a square grinder (as we suggest), make sure the grinder operator does not over-heat your chain's cutter-teeth. Inexperienced or sloppy grinder operators sometimes burn cutter-teeth. Overheating damages the teeth and usually makes them super-hard. This makes them nearly impossible to sharpen with a file. • You will never become so good at square-filing that you won't want or need a squaregrinder. One good thing that comes with square-filing experience is you learn what wellsharpened square-ground cutter-teeth look like. So even if you don't master the skill of hand-filing, the effort is not wasted because the experience will reduce the learning curve associated with learning to use a square-grinder. • Many pro saw users who square-file, don't do it well. Most don't realize (or admit) the kind of cutting performance they would enjoy if their chains were sharpened properly. So, if you find that square-filing is not for you AND you don't see yourself getting a squaregrinder, don't keep doing it. Instead, sharpen your chain with a round-file. No, your chain won't perform as well as it did when it was squareground, but it will cut better than a poorly sharpened squarefiled chain. Round-filing is much easier to do effectively. Plus, the files are less expensive. Conclusion For more information on how to get top performance from your saw's bar and chain, a s k u s t o i n c l u d e a f re e OREGON Maintenance and Safety Manual in your next order. This seventy-five page manual is filled with all kinds of useful information on your saw's bar, chain, and drive sprocket. In it is more information that we don't have room to include here such as sharpening angles, depth gauge settings, and more. It is a good reference for both expert and less experienced pro saw users. And yes, you read it right, it's yours compliments of your friends at OREGON Cutting Systems. Let us know if you have more questions. You ask, and we'll keep working on straight answers. That's why we're the Pro's Choice. For more information ask us to include a free OREGON Maintenance and Safety Manual in with your next order. “The Pro’s Choice” Call (360)736-1336 24 hours Summer 2015 Catalog Sale Catalog Sale Specials -- This sheet contains prices on many of the "call for price" items listed in this catalog. It also contains items that are currently priced lower than those listed in the white pages of this catalog. These sale prices are good thru September 2015, or while supplies last. Double Front Logger's Jeans Hickory Shirt DF Logger's Jeans feature a double layer of cotton denim in the knee and upper leg area. 99 Box of 200 28. Wonder Grip Gloves 12+ 90¢ ea Nylon Faller's Gloves have a snug fit for good dexterity. They are made of long-wearing knitted polyester. Size: XS to XL. Harvester Saw Chain 100' roll of #18HX- $389. 100' roll of #11BC- $622. 100' roll of #11H - $622. 1-800-822-2808 4 $ 50 Wonder Grip Gloves are doublecoated nylon liners ideal for working in wet environments. Size: S to XXL. Henley T Shirt 1499 $ 1199 For Bigs & Talls add $1. White Ox Gloves Thick Cotton Gloves 2 $ 89 12+ 4 $ 95 $249 ea Add 20¢ for elastic band Add 60¢ for XL size Madsen's Gloves are extra thick on the palm and fingers. Their simple design offers great value because they work hard and last long. Size: Large. Reel Chain Sale While supply lasts, any 100’ roll of OREGON® 3/8”pitch square ground chisel saw chain in stock is only: $269. 2299 See page #42 for the size chart and for more information. For Bigs & Talls add $1. 99¢ Alaska Toll Free Order Line $ $ $ 1899 Double Front Big and tall sizes are extra. The sale price includes both the classic ear plugs and the soft FX style. Ask about the new 18HX harvester chain and our low prices on OREGON® harvester bars. $ 2199 Ear Plugs Nylon Fallers Gloves Single Front $ 34 $ Logger's Jeans Plus, we’ll throw in a FREE collector's ball cap with each roll you buy. This cap is custom made and features our logo embroidered on the crown. Get yours today! White Ox gloves are made of cotton for maximum comfort and protection. Size: M, L, & XL Power Match Bars for Stihl & Husky 6650 7050 7350 7850 8050 9350 1395 28" . . . . . $ 30" . . . . . $ 32" . . . . . $ 34" . . . . . $ 36" . . . . . $ 42" . . . . . $ Bar Tips . $ Madsen's Shop & Supply Inc. • 1408 South Gold • Centralia WA 98531 • 360-736-1336 More Sale Specials... Prices good thru September, 2015, or while supplies last. Call (360) 736-1336. Deluxe Chaps Boots DELUXE chaps have 6-plies of Labonville's unique knitted Kevlar/Polyester fabric encased in a tough Cordura nylon shell. They meet U.L. standards for protection, yet are lightweight and inexpensive. See page #30 for information on fit and protection. Short Regular Long XLong Leather lace-to-toe logger’s boots with screw-in calks. A real value. 22999 $ XXLong 6195 $6495 $7195 $7395 $8095 $ Yo u r c h o i c e o f a n y MADSEN'S brand waxed or unwaxed chisel grinding wheel except for the ceramic wheel. Chain Grinding Wheels Logger's Jeans 1550 $ Our entire inventory of Madsen's Logger's Jeans are on sale. We have over a thousand pair in stock! Single Front Double Front Sale price on the #M99 ceramic wheel is $34.50 2499 $ 2899 $ 32" Cannon Super Bar Hickory Shirt Madsen's Hickory's are cut from a roomy pattern and made of 100% striped cotton denim. Every Cannon bar is individually made by skilled craftsmen. They are made for the professional logger who recognizes and appreciates excellent quality and value. These bars are available in 32" .063" gauge with either a STIHL or HUSKY mount. Other lengths are available. Call for more information. 24 $ 13750 $ 99 Big and tall sizes are extra. Blaze Pro™ or Blue Ox™ Faller's Wedges Logger's Socks Crew Socks Cotton blend knit. Available white or black/grey. These high-bulk acrylic socks are our best selling socks. 6 $ 99 Style #7587 Style #6546 CLEAR CREEK Merino Wool Socks $ 99 Style #CC845 USA Wool Blend Socks These cushion socks feature a reinforced heel and toe. These sox feature 60% Merino wool. 3 8 $ 99 Six Pack Style #NU-2 4 $ 99 Three Pack Romeos Take advantage of this special price on Madsen's Romeos. See the catalog listing for sizes. 9999 $ Price per Dozen 8"- $39. ($325 ea) 10"- $45. ($375 ea) 12"- $60. ($500 ea) Shown is the Blue Ox wedge, but both are made of high impact ABS by Piller Plastics. HONDA Generator #EU2000 List $1149.95 Special Sale Price: 927. $ • Oil Alert engine protection • 2000 watt maximum output • Electronic circuit breaker • Super Quiet - 59 dB Price & availability limited to stock on hand. Please read the owner’s manual before operating your Honda Power Equipment. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2000 American Honda Motor Co. Inc.