Brazed Tools - Severance Tools of Canada Ltd.
Transcription
Brazed Tools - Severance Tools of Canada Ltd.
www.canelatools.com Brazed tools Cartridges Drills Threading Parting and grooving Ceramic tools Automatic lathes Aluminium wheel turning General turning Inserts Brazed tools K.02 Inserts K.03 Applications index K.05 Toolholders K.06 Boring bars K.11 Tooling Brazed tools Technical information CANELA K.01 For more information see page: Brazed tools Technical information: K.02 Applications index: K.05 Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information Inserts Uncoated inserts KM15 General turning A finishing grade in the K10 range. This carbide grade is for use on coast iron, aluminium and heat-resistant alloys. This grade works well on cobalt based alloys and synthetic materials and is suitable for finishing on heat-resistant alloys. PM25 Aluminium wheel turning A general purpose uncoated grade in the P30 range. This tough, economical grade is for machining of carbon steels, alloys steels, tool steels and stainless steels. PM25 provides toughness and resistance to deformation in roughing and semi-finishing operations. Grinding Ceramic tools Automatic lathes In order to obtain a satisfactory result, it is necessary to have a steady grinding table or holder which can be set to the required angle by means of a graduated scale and by non-vibrating small spindles. Rough grinding is normally carried out using a silicon carbide grinding wheel. The finish grind or lapping must always be made using a diamond wheel. Longer life of the cutting edge and less breakage justify the increased cost of correct grinding. The grinding wheel must be kept clean to ensure that cutting capacity is maintained. Whenever possible, always grind perpendicular to the cutting edge. a Parting and grooving a.- Top face b.- Secondary clearances c.- Lapped primary clearances d.- Chipbreaker groove d Brazed tools Cartridges Drills Threading b c K.02 www.canelatools.com Brazed tools Inserts Normally available for immediate delivery AB 6 AB 8 s ZR10 TIN32 - TIN25 ß° TIN22 r 2,00 3,00 TIN17 b 4,00 5,00 TIN16 s 2,50 3,00 PM40 l 6,00 8,00 PM25 AB KM15 Only available in a limited quantity l r b Normally available for immediate delivery s s ß° ß° l 10° b l 8° b Only for: -ABC 10 -ABC 20 -ABC 25 ABC 10 ABC 12 ABC 16 ABC 20 ABC 25 6,00 8,00 10,00 12,00 14,00 - 16° 18° 18° 16° 16° ZR10 4,00 5,00 6,00 7,00 8,00 TIN32 11,00 13,00 17,00 21,00 26,00 TIN25 ß° TIN22 r TIN17 b TIN16 s PM40 l PM25 ABC KM15 Only available in a limited quantity 7° Only for: -ABC 12 -ABC 16 Normally available for immediate delivery s ß° l C7 C8 C 10 C 12 C 16 C 20 C 25 ZR10 0° 0° 18° 18° 18° 18° 18° TIN32 7,00 8,00 10,00 12,00 16,00 20,00 25,00 TIN25 ß° - TIN22 r TIN17 b 5,00 5,00 6,00 8,00 10,00 12,00 14,00 TIN16 s 2,50 3,25 4,00 5,00 6,00 7,00 8,00 PM40 l PM25 C KM15 Only available in a limited quantity b Normally available for immediate delivery s ß° l D3 D4 D5 D6 D8 D 10 ZR10 TIN32 0° 14° 14° 14° 14° 14° TIN25 ß° - TIN22 r TIN17 b 8,00 10,00 12,00 14,00 16,00 18,00 TIN16 s 3,00 4,00 5,00 6,00 8,00 10,00 PM40 l 3,00 4,00 5,00 6,00 8,00 10,00 PM25 D KM15 Only available in a limited quantity b Normally available for immediate delivery ß° 80° 9° 9° 9° 9° 9° ZR10 - TIN32 12,00 14,00 16,00 18,00 20,00 TIN25 3,00 4,00 4,00 5,00 6,00 TIN22 5,00 6,00 8,00 10,00 12,00 TIN17 ß° TIN16 r PM40 b l b CANELA Brazed tools E5 E6 E8 E 10 E 12 s Tooling s l PM25 E KM15 Only available in a limited quantity K.03 For more information see page: Brazed tools Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information: K.02 Applications index: K.05 Inserts Normally available for immediate delivery ß° General turning s r ZR10 TIN32 5° 5° 5° 5° TIN25 ß° 1,00 1,20 1,50 1,80 TIN17 r 3,50 4,00 5,00 6,00 TIN22 b 3,50 4,00 5,00 6,00 TIN16 s 12,00 14,00 16,00 18,00 PM40 l FIL 3,5 FIL 4 FIL 5 FIL 6 PM25 FIL KM15 Inserts Only available in a limited quantity l Normally available for immediate delivery s 10° 4,00 4,00 5,00 12,00 14,00 17,00 1,00 1,50 2,50 30° 30° 30° ZR10 8,00 10,00 12,00 TIN32 PR 8 PR 10 PR 12 TIN25 ß° TIN17 r TIN22 b TIN16 s PM40 l PM25 PR KM15 Only available in a limited quantity r l ß° b Ceramic tools Normally available for immediate delivery Parting and grooving s 6° Threading r l ß° TR 16-32 TR 16-36 TR 20-32 TR 20-36 TR 20-38 ZR10 16,00 16,00 20,00 20,00 20,00 TIN32 ß° 32° 36° 32° 36° 38° TIN25 r 5,00 4,00 7,50 5,80 7,50 TIN17 b 21,00 21,00 25,00 25,00 25,00 TIN22 s 6,00 6,00 6,00 6,00 6,00 TIN16 l PM40 TR PM25 Only available in a limited quantity KM15 Automatic lathes Aluminium wheel turning b Brazed tools Cartridges Drills b K.04 www.canelatools.com Brazed tools Applications index Toolholders ISO 1 75° ISO 2 45° ISO 4 90° ISO 5 90° ISO 6 90° ISO 7 90° Page K.06 Page K.06 Page K.07 Page K.07 Page K.08 Page K.08 ISO 351 80º Page K.09 UI 30 55° - 60° Page K.09 UI 80 Page K.10 Boring bars ISO 9 90° Page K.11 Page K.11 UI 40 55° - 60° Page K.12 UI 50 90° Page K.12 C6 60° Page K.13 D6 90° Page K.13 Tooling Brazed tools ISO 8 75° CANELA K.05 For more information see page: Brazed tools Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information: K.02 Applications index: K.05 Toolholders Inserts Characteristics: Brazed toolholder DIN 4971 h General turning f L2 L1 ISO 1 75° REF Ref. Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size Kg ISO1 1616 R ISO1 1616 L 16 16 16 16 110 110 11 11 10 10 ABC 12 ABC 12 0,200 0,200 ISO1 2020 R ISO1 2020 L 20 20 20 20 125 125 15 15 12 12 ABC 16 ABC 16 0,350 0,350 ISO1 2525 R ISO1 2525 L 25 25 25 25 140 140 18 18 15 15 ABC 20 ABC 20 0,650 0,650 KM15 PM25 Parting and grooving Ceramic tools Automatic lathes Aluminium wheel turning b Threading Characteristics: Brazed toolholder DIN 4972 h b f L2 Drills L1 ISO 2 45° REF Brazed tools Cartridges Ref. K.06 Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size Kg ISO2 1010 R ISO2 1010 L 10 10 10 10 90 90 8 8 14 14 C8 C8 0,070 0,070 ISO2 1212 R ISO2 1212 L 12 12 12 12 100 100 10 10 17 17 ABC10 ABC10 0,100 0,100 ISO2 1616 R ISO2 1616 L 16 16 16 16 110 110 12 12 22 22 ABC12 ABC12 0,200 0,200 ISO2 2020 R ISO2 2020 L 20 20 20 20 125 125 16 16 28 28 ABC16 ABC16 0,400 0,400 ISO2 2525 R ISO2 2525 L 25 25 25 25 140 140 20 20 35 35 ABC20 ABC20 0,650 0,650 ISO2 3232 R ISO2 3232 L 32 32 32 32 170 170 25 25 44 44 ABC25 ABC25 1,300 1,300 KM15 PM25 www.canelatools.com Brazed tools Toolholders Characteristics: Brazed toolholder DIN 4976 h b f L2 L1 ISO 4 90° REF Ref. Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size Kg ISO4 1010 N 10 10 90 10 10 ABC10 0,070 ISO4 1212 N 12 12 100 12 12 ABC12 0,100 ISO4 1616 N 16 16 110 16 16 ABC16 0,250 ISO4 2020 N 20 20 125 20 20 ABC20 0,400 ISO4 2525 N 25 25 140 25 25 ABC25 0,650 KM15 PM25 Characteristics: Brazed toolholder DIN 4977 h f b L2 L1 ISO 5 90° REF b L L2 f Insert size Kg ISO5 1616 R ISO5 1616 L 16 16 16 16 110 110 12 12 24 24 ABC12 ABC12 0,200 0,200 ISO5 2020 R ISO5 2020 L 20 20 20 20 125 125 16 16 30 30 ABC16 ABC16 0,400 0,400 KM15 PM25 Brazed tools h Tooling Ref. Normally available for immediate delivery Only available in a limited quantity CANELA K.07 For more information see page: Brazed tools Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information: K.02 Applications index: K.05 Toolholders Inserts Characteristics: Brazed toolholder DIN 4980 h General turning L2 L1 ISO 6 90° Ref. Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size Kg ISO6 1010 R ISO6 1010 L 10 10 10 10 90 90 8 8 14 14 C8 C8 0,070 0,070 ISO6 1212 R ISO6 1212 L 12 12 12 12 100 100 10 10 17 17 ABC10 ABC10 0,100 0,100 ISO6 1616 R ISO6 1616 L 16 16 16 16 110 110 12 12 22 22 ABC12 ABC12 0,200 0,200 ISO6 2020 R ISO6 2020 L 20 20 20 20 125 125 16 16 28 28 ABC16 ABC16 0,400 0,400 ISO6 2525 R ISO6 2525 L 25 25 25 25 140 140 20 20 35 35 ABC20 ABC20 0,650 0,650 ISO6 3232 R ISO6 3232 L 32 32 32 32 170 170 25 25 44 44 ABC25 ABC25 1,250 1,250 Parting and grooving Ceramic tools Automatic lathes Aluminium wheel turning b f KM15 PM25 Threading Characteristics: Brazed toolholder DIN 4981 h b f L2 Drills L1 ISO 7 90° Brazed tools Cartridges Ref. K.08 Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size Kg ISO7 1208 R ISO7 1208 L 12 12 08 08 100 100 12 12 3 3 D3 D3 0,070 0,070 ISO7 1610 R ISO7 1610 L 16 16 10 10 110 110 14 14 4 4 D4 D4 0,150 0,150 ISO7 2012 R ISO7 2012 L 20 20 12 12 125 125 16 16 5 5 D5 D5 0,200 0,200 ISO7 2516 R ISO7 2516 L 25 25 16 16 140 140 20 20 6 6 D6 D6 0,400 0,400 ISO7 3220 R ISO7 3220 L 32 32 20 20 170 170 25 25 8 8 D8 D8 0,750 0,750 ISO7 4025 R ISO7 4025 L 40 40 25 25 200 200 32 32 10 10 D10 D10 1,350 1,350 KM15 PM25 www.canelatools.com Brazed tools Toolholders Characteristics: Brazed toolholder DIN 4975 h f 80° b L2 L1 ISO 351 80º REF Ref. Normally available for immediate delivery Only available in a limited quantity h b L L2 f Insert size ISO351 1212 N 12 12 100 10 5 E5 0,100 ISO351 1616 N 16 16 110 12 6 E6 0,200 0,200 ISO351 2012 N ISO351 2020 N 20 20 12 20 125 125 12 16 6 8 E6 E8 ISO351 2516 N ISO351 2525 N 25 25 16 25 140 140 16 18 8 10 E8 E10 Kg KM15 PM25 0,400 0,400 0,650 Characteristics: Brazed toolholder ISO 352 h 60° f b 55° L2 L1 UI 30 b L L2 f Insert size Kg UI 30 55° 1212 R UI 30 55° 1616 R UI 30 55° 2020 R UI 30 55° 2525 R 12 16 20 25 12 16 20 25 100 110 125 140 12 14 16 18 1,8 2,0 2,5 3,0 FIL 3,5 FIL 4 FIL 5 FIL 6 0,100 0,200 0,350 0,600 UI 30 60° 1212 R UI 30 60° 1616 R UI 30 60° 2020 R UI 30 60° 2525 R 12 16 20 25 12 16 20 25 100 110 125 140 12 14 16 18 1,8 2,0 2,5 3,0 FIL 3,5 FIL 4 FIL 5 FIL 6 0,100 0,200 0,350 0,600 KM15 PM25 Brazed tools h Tooling Ref. Normally available for immediate delivery Only available in a limited quantity 55° 60° CANELA K.09 For more information see page: Brazed tools Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information: K.02 Applications index: K.05 Toolholders Inserts Characteristics: Brazed toolholder DIN 2217 h General turning f b L1 UI 80 Ref. Normally available for immediate delivery Only available in a limited quantity h b L L2 ß° Insert size Kg UI 80 34° 2516 UI 80 36° 2516 UI 80 38° 2516 25 25 25 16 16 16 170 170 170 34° 36° 38° 4,2 3,7 3,1 TR16-3.. TR16-3.. TR16-3.. 0,500 0,500 0,500 UI 80 34° 3220 UI 80 36° 3220 UI 80 38° 3220 32 32 32 20 20 20 200 200 200 34° 36° 38° 6,2 5,5 4,9 TR20-3.. TR20-3.. TR20-3.. 0,950 0,950 0,950 KM15 PM25 Brazed tools Cartridges Drills Threading Parting and grooving Ceramic tools Automatic lathes Aluminium wheel turning ß° K.10 www.canelatools.com Brazed tools Boring bars Characteristics: Brazed boring bar UNI 4110 A h h1 f L2 L1 ISO 8 75° Ref. Normally available for immediate delivery Only available in a limited quantity h=b h1 L b2 L2 f A Insert size Kg ISO8 1010 R 10 8,0 150 3,8 50 14 18 C7 0,100 ISO8 1212 R 12 9,6 180 4,8 63 17 21 C8 0,200 ISO8 1616 R 16 12,8 210 5,7 80 22 27 ABC 10 0,400 ISO8 2020 R 20 16,0 250 7,6 100 28 34 ABC 12 0,700 ISO8 2525 R 25 20,0 300 9,5 125 35 43 ABC 16 1,300 KM15 PM25 Characteristics: Brazed boring bar UNI 4111 h1 h A f L2 L1 h1 L b2 L2 f A Insert size Kg ISO9 0808 R 8 6,4 125 3,1 40 11 14 C7 0,060 ISO9 1010 R 10 8,0 150 4,0 50 14 18 C7 0,100 ISO9 1212 R 12 9,6 180 5,1 63 17 21 C8 0,250 ISO9 1616 R 16 12,8 210 6,2 80 22 27 ABC 10 0,400 ISO9 2020 R 20 16,0 250 8,3 100 28 34 ABC 12 0,700 ISO9 2525 R 25 20,0 300 10,0 125 35 43 ABC 16 1,300 ISO9 3232 R 32 25,6 355 12,0 160 44 52 ABC 20 2,500 KM15 PM25 Tooling Ref. h=b Brazed tools ISO 9 90° Normally available for immediate delivery Only available in a limited quantity CANELA K.11 For more information see page: Brazed tools Inserts K.03 Toolholders: K.06 Boring bars: K.11 Technical information: K.02 Applications index: K.05 Boring bars Inserts Characteristics: Brazed boring bar ISO 353 h h1 UI 40 55° h1 h General turning d Ref. b f 55° L1 60° L1 Normally available for immediate delivery Only available in a limited quantity 55° 60° d h=b L L2 f Insert size Kg UI 40 55° 1010 R UI 40 55° 1212 R UI 40 55° 1616 R UI 40 55° 2020 R 10 12 16 20 10 12 16 20 100 110 140 160 26 26 33 41 1,8 1,8 2,0 2,0 FIL 3,5 FIL 3,5 FIL 4 FIL 4 0,070 0,200 0,250 0,450 UI 40 60° 1010 R UI 40 60° 1212 R UI 40 60° 1616 R UI 40 60° 2020 R UI 40 60° 2525 R 10 12 16 20 25 10 12 16 20 25 100 110 140 160 180 26 26 33 41 49 1,8 1,8 2,0 2,0 2,5 FIL 3,5 FIL 3,5 FIL 4 FIL 4 FIL 5 0,070 0,200 0,250 0,450 0,750 KM15 PM25 Parting and grooving Ceramic tools Automatic lathes Aluminium wheel turning d b f UI 40 UI 40 60° L2 L2 Threading Characteristics: Brazed boring bar ISO 354 h1 h L2 b d Drills f UI 50 90° Brazed tools Cartridges Ref. K.12 L1 Normally available for immediate delivery Only available in a limited quantity d h=b L L2 f UI 50 90° 1010 R 10 10 140 52 UI 50 90° 1212 R 12 12 160 UI 50 90° 1616 R 16 16 UI 50 90° 2020 R 20 UI 50 90° 2525 R 25 Insert size Kg 3 D3 0,100 56 4 D4 0,200 180 63 5 D5 0,350 20 210 80 6 D6 0,700 25 250 100 8 D8 1,250 KM15 PM25 www.canelatools.com Brazed tools Boring bars Characteristics: Brazed boring bar h f d L2 60° L1 Normally available for immediate delivery C6 60° Ref. Only available in a limited quantity d h=b L L2 f Insert size Kg C6-08 8 7,5 30 6,5 0 C7 0,010 C6-10 10 9,0 50 6,5 0 C8 0,025 KM15 PM25 Characteristics: Brazed boring bar h d f L2 L1 Normally available for immediate delivery D6 90° h L L2 f Insert size Kg D6-08 8 7,0 30 7,0 1,9 C7 0,010 D6-10 10 8,5 50 8,0 4,6 C8 0,025 D6-12 12 10,5 60 10,0 5,6 ABC10 0,045 D6-16 16 14,0 90 12,0 7,6 ABC12 0,150 KM15 PM25 Brazed tools d Tooling Ref. Only available in a limited quantity CANELA K.13