Specialty Finishes Brochure - Continuous Insulation

DS264
Specialty
Finishes
Energy efficiency…Looks…Longevity…Dryvit!
Today’s high performance building exterior demands continuous insulation, engineered,
all weather performance, and an attractive life cycle cost. Dryvit Outsulation systems
provide all three.
A high performance insulated exterior cladding system requires a 21st century appearance –
and Dryvit has developed a variety of finish options that offer the look of stucco, limestone, granite, metal, and brick.
If you can design it, it is highly likely that Dryvit can meet your performance AND aesthetic requirements.
Dryvit Outsulation systems with a specialty finish…
demonstrably superior…
Energy efficiency – Outsulation systems meet the continuous insulation requirements of the 2009 IECC,
ASHRAE 189.1, California Title 24, and can contribute significantly to LEED 3.0 certification.
Cost effective – An Outsulation system weighs a fraction of other heavier claddings allowing for savings in
concrete, structural steel, and transportation.
Visual appeal – A wide range of textures, finishes, colors and techniques are available for maximum curb appeal.
Availability – Five North American manufacturing locations and over 150 distribution outlets ensure all material
on the job within days. Custom samples are never a problem.
Cost effective – Entire cladding and various finishes all installed by a single contractor, with single source
manufacturer warranty!
Quality – All Dryvit manufacturing facilities are ISO 9001:2008 and 14001:2004 certified.
Environmental sustainability – NIST LCA shows Outsulation systems have a smaller environmental impact
than other common claddings*
(*available on request on www.dryvitisgreen.com)
After 2000 years ... a better brick!
Manufacturing and transporting clay brick is energy
intensive. On the jobsite, it has to be combined (by several
contractors) with substrate protection and insulation
(supplied by others) and there is no ‘single source’
responsibility or warranty for the performance of the
wall. A Dryvit Outsulation system with Custom Brick finish
provides an environmentally superior, simpler, cost effective
alternative, from a single source. Now that’s a better brick!
University Dormitory Complex
Reno, NV
Used Wall Brick
Private Residence
Chicago, IL
New York Brick
Atlantic Station
Atlanta, GA
Utility Brick
Dryvit Custom Brick comes in a variety of standard ‘templates’ –
but we can also match an existing building or locally preferred
pattern or brick size. Combine this design flexibility with an
infinite selection of colors, textures and shading techniques,
your building exterior can look EXACTLY the way you want!
A full Custom Brick brochure can be obtained by calling Dryvit customer service, contacting your authorized local Dryvit distributor, or on our web site at www.dryvit.com/specialtyfinishes
Elegant and Distinctive
Private Residence
Lexington, SC
Similar to brick, limestone is another heavy
material from a bygone era that is energy
intensive to harvest, shape and transport.
Lymestone finish by Dryvit, however, is not.
Lymestone finish is comprised of natural
minerals, blended with 100% acrylic polymers
and long lasting pigments, and is readily
available in an infinite color selection.
Tenn Care Building
Nashville, TN
Office Building
Tampa, FL
Lymestone
Custom Brick & Lymestone
Tuscan Glaze over Lymestone Finish
On larger wall surfaces, EPS shapes and aesthetic
reveals are commonly used to yield a realistic
limestone effect
The smooth Lymestone finish complements Dryvit
Custom Brick – the better brick.
Lymestone is the perfect finish on which to apply
Dryvit Tuscan Glaze – resulting in an old world
plaster appearance.
A full Lymestone brochure can be obtained by calling Dryvit customer service, contacting your authorized local Dryvit distributor, or on our web site at www.dryvit.com/specialtyfinishes
A LW AYS
Taken
for
Granite
‘Solid’…‘Stately’…‘Monumental’ all describe buildings
made of granite. Granite, like brick and limestone, is heavy
and energy intensive to find, produce, and transport. To
accommodate its weight, a building also requires more
concrete and steel structural support – adding to the cost and
environmental footprint of the project.
Incorporating a blend of quartz, minerals and mica, Dryvit’s
TerraNeo finish is an environmentally sustainable, 21st century
alternative – allowing you to create the appearance you
want without the cost, duration and environmental impact
associated with heavier materials.
Palazzo di Bocce
Orion, MI
Standard Colors
Everest
Glacier
Andes
Amazon
Se r e n g e t i
Vesuvius
Sonora
Teton
Zanzibar
Gi b r a l t a r
Mica Colors: Available in silver/white,gold and black.
A full TerraNeo brochure can be obtained by calling Dryvit customer service, contacting your authorized local Dryvit distributor, or on our web site at www.dryvit.com/specialtyfinishes
Add Mediterranean Subtlety and Distinction to Your Building
The Tuscany region of Italy is famous for its beautifully
rustic architecture, and is the inspiration for Dryvit’s
Tuscan Glaze. This aged, muted, weathered appearance
was once something that took years to take place – but
is now available immediately by design.
Retail Center
Sioux Falls, SD
Any of Dryvit’s pigmented finishes can be stained with
Tuscan Glaze to provide an antique ‘Old World’ flair.
Private Residence
Spokane, WA
Standard Colors
Morning Petal
Metropolitan
Maple Walnut
Heather
Cool Mist
Buttercup
Bermuda Sand
Sage
Platinum Grey
Northern Grey
Salmon
Blue Haze
A full Tuscan Glaze brochure can be obtained by calling Dryvit customer service, contacting your authorized local Dryvit distributor, or on our web site at www.dryvit.com/specialtyfinshes
Make your next project shine!
A shiny, reflective look can add sophistication to any façade.
Metal is a great complement to other finishes, and until now
there have been limited and expensive options for achieving
this appearance. Dryvit’s Reflectit coating, used as the finish
for any Outsulation system, results in a lightweight, cost
effective, energy efficient, engineered cladding.
An array of textures, including smooth, is available
and color options are nearly limitless.
Restaurant, Pensacola, FL
CB&E Office Building, Chesterfield, MO
University of New Mexico Children’s Hospital
Albuquerque, NM
Standard Colors
259-Maize
250-Teal Magnolia
254-Sierra Rose
253-Cleopatra
261 Chili Pepper
255-Tin Man
260-Caribbean
256-Mediterranean 252-Hammered Copper
257-Champagne
251-Starry Night
258-Barney
A full Reflectit coating brochure can be obtained by calling Dryvit customer service, contacting your authorized local Dryvit distributor, or on our web site at www.dryvit.com/specialtyfinishes
Dryvit Specialty Finishes:
Design Flexibility
and Performance Value
Lightweight, flexible, durable and highly energy
efficient, Dryvit specialty finishes over an
Outsulation system provides the greatest
performance value available.
Is your existing building an
energy hog? Leaking and drafty?
Unattractive and outdated
in appearance?
An Outsulation System with a Specialty Architectural Finish from Dryvit might
be your solution! Incorporating an air barrier and continuous insulation,
Outsulation system can be installed on the exterior of almost any building
without structural modification and interruption to the commerce and activity
inside. This can help restore the building to ‘as new’ condition – or give it a totally new look – while upgrading its
performance and energy efficiency to ‘high performing’ standards.
For more information visit www.dryvitcare.com.
Dryvit Systems, Inc. is certified to ISO 9001:2008 and ISO 14001:2004 standards, the worldwide common denominators for product consistency
and environmental responsibility. These certifications help identify Dryvit as the leader in EIFS technology.
Dryvit Systems, Inc.
One Energy Way
P.O. Box. 1014
West Warwick, RI 02893
800-556-7752
401-822-4100
www.dryvit.com
Information contained in this brochure conforms to the standard detail recommendations and specifications for the installation of
Dryvit Systems, Inc. products as of the date of publication of this document and is presented in good faith. Dryvit Systems, Inc.
assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any project. To ensure that you are
using the latest, most complete information, contact Dryvit Systems, Inc.
©Dryvit Systems, Inc. 2010 Printed in U.S.A. 4-10-5M