459.00

8
0
20
*
Variable speed
conveyor belt
$1859.00
Model 15-250 M1
Reg. $2520.00
24” HORIZONTAL DOUBLE
DRUM SANDER
• Two 5” diameter aluminum drums.
• High quality conveyor belt for long
service life.
• Magnetic safety switch.
• 3 to 20 FPM variable feeding speed
(conveyor belt).
• Powerful 3 HP main motor.
10” TILTING ARBOR SAW - left tilt
$979.00
Model 50-220 M1
Reg. $1215.00
$1050.00
• Aluminum fence system # SF36T30
(MODEL 50-220 M1).
• GENERAL “T” fence system # F36T28
(MODEL 50-220C M1).
• GENERAL “T” fence system # F36T52
(MODEL 50-220CL M1 - $1095.00 - not shown).
• 44” x 27” cast-iron table with
extension wings.
• Solid one-piece yoke.
• Large stop switch.
• Dual direct dust collection includes
built-in blade shroud connected to a
standard 4” dust outlet.
• Powerful 2 HP motor.
Model 50-220C M1
*Prices in effect until
May 31st 2008
GENERAL “T” FENCE SYSTEM
Made in Canada
Reg. $1440.00
DIGITAL BLADE
ANGLE DISPLAY
Distributed by
“SUPER TURBO”
AIR CLEANING SYSTEM
• Air movement (3 speeds)
700, 900, 1250 CFM.
• Timer settings 2, 4, 6,
8 hrs & continuous.
• Powerful 1/3 HP motor.
$459.00
Model 10-600 M1
WE RESERVE THE RIGHT TO CORRECT ANY TYPOGRAPHICAL AND PICTORIAL ERRORS
WITHOUT NOTICE.
$59.00
Made in
Canada
10” TILTING ARBOR SAW
UNIVERSAL MOBILE BASE
ITEM #50-025
Heavy-duty steel. Strong 3” wheels.
Rubber levelling feet (2). Adjustment
in 1” increments. 500 LBS capacity.
$2649.00
Model 350-T50-M2M
/650-T50-M2M
$178.00
Reg. $3658.05
HEAVY-DUTY MOBILE BASE FOR TABLE SAWS
WITH EXTENSION TABLE & LEGS
ITEM #50-030
Heavy-duty steel. Strong 4” wheels.
900 Lbs capacity.
$249.00
FLEXIBLE, EXPANDIBLE 2-WAY ROLLER STAND
ITEM #50-167S
Adjustable height from 24 1/4” to 37”.
9 Nickel-plated 2 1/4” x 20” 2-way
rollers. 51 1/2” maximum expanded
length. Load capacity of 300 LBS per
set.
$109.00
TENONING JIG FOR TABLE SAW
ITEM #50-050
Perfect fit on right or left tilt table
saws. Heavy-duty cast-iron construction. Large handles for better operator control.
2
GENERAL “T” FENCE SYSTEM
Made in Canada
10” TILTING ARBOR SAW
$1699.00
Model 50-250K M1
/50-260K M1
MELAMINE
EXTENSION TABLE
WITH LEGS INCLUDED
Reg. $2150.00
$9999.00
Model 550-T50-M57
Reg. $12 897.50
Made in
GENERAL “T” FENCE SYSTEM
Made in Canada
14” INDUSTRIAL TILTING
ARBOR SAW
MODEL 550-T50-M57- right tilt
• High-quality reinforced steel cabinet.
• 3 matching V-belts.
• Heavy-duty, precise rip fence
system #F48T50.
• Magnetic safety switch.
• Powerful 7 1/2 HP motor.
NEW
$4999.00
Reg. $5580.00
POWERFUL
3 HP MOTOR
MODEL 50-250K M1 - right tilt
MODEL 50-260K M1 - left tilt
• 3 matching V-belts.
• Hi-precision professional quality rip
fence system #F42T50.
• Magnetic safety switch.
• Powerful 3 HP motor.
GENERAL “T” FENCE SYSTEM
Made in Canada
Canada
THREE SAWS IN
ONE!
COMPACT & VERSATILE
DESIGN. CAN BE USED AS
A REGULAR SAW, BUT
INCLUDES A BUILT IN SLIDING TABLE FOR STABLE
EFFORTLESS CROSSCUTS &
A SEPARATE SCORING BLADE
FOR CHIP FREE CUTS IN
MELAMINE & LAMINATES.
MODEL 350-T50-M2M - right tilt
MODEL 650-T50-M2M - left tilt
• 2 matching V-belts.
• “T” fence system with 50” rails.
• Magnetic safety switch.
• 36” extension table with adjustable
steel support legs.
• Powerful 3 HP motor.
SEE-THROUGH BLADE
GUARD WITH SPLITTER
AND ANTI-KICKBACK
PAWLS
DUST COLLECTION FROM
CABINET AND BLADE
10” SCORING SAW WITH
BUILT-IN SLIDING TABLE
MODEL 50-560 M1
• Separate safety lock out switch
for scoring motor – can be turned
off when cutting solid wood.
• Powerful totally enclosed fan
cooled (TEFC) main motor and
separate 1/2 HP motor for scoring
blade.
• Heavy-duty cabinet mounted
cast-iron trunnions.
• Solid cast-iron table with anodized
aluminum coating for improved
friction free performance and
longer table life.
PNEUMATIC MOBILE BASE
$749.00
Model Ex-21
Head tilts 45°
left & right
$189.00
Item 10-929 (29” x 29”)
Reg. $210.00
Reg. $300.00
Reg. $849.00
21” SCROLL SAW
• Head tilts 45° left and right, tilting the blade,
not the table keeping the workpiece level.
• 21” throat capacity & 2” thickness capacity.
• Variable speed of 400 to 1550 STROKES/MIN.
EDGE BANDER
“OSBORNE” MITER GAUGE
• Solid triangular design for tight
miter joints.
• Sliding flip-up stop.
• Easy to read index graduations.
• Patented extension arm
assembly makes it quick &
easy to find any angle and
lock it securely in place.
$109.00
Item 50-EB3
Reg. $779.95
$800.00
Item 50-SLT60
Reg. $899.98
Unique design t:
ke
mounting brac
pivots arm
e
away or remov
completely in
seconds
OVERARM BLADE COVER
SYSTEM WITH DUST COLLECTION
CAPABILITY
ITEM 50-EXBC10 - 10”
(fits on most 10” saws)
ITEM 50-EXBC14 - 14”
(fits on most 12” & 14” saws)
• 4” main boom and 3”
inner boom. Flexible 3”
hose connects the blade
cover to the boom.
$149.00
Reg. $399.00
BELT SANDER/GRINDER
Reg. $200.00
MODEL 15-232
• Double sealed ball-bearing construction.
• Adjustable aluminum tool-rest.
• 3450 RPM grinding speed.
• 4900 FPM belt speed.
• Powerful 1/3 HP motor.
Reg. $135.00
$600.00
• Easy to install sliding table
system for table saws and
shapers, ensures quick and
precise cuts with large
panels.
• Fits most 10" to 14" table
saws and most shapers.
$349.00
ITEM 45-100
• Electronically controlled heat element
variable heat from 100 to 200° C.
• Accommodates a wide range of edge
banding material up to 2” thick.
• Built-in cut-off knife with palm-strike
knob.
• 26 3/4” x 7 1/2” laminate covered table
supports large workpieces.
Item 50-SLT40
SLIDING TABLE
$279.00
Item 10-824(18” x 24”)
• Move heavy objects on a
cushion of air.
• Requires standard compressed air
and a smooth hard floor.
• Customizable - can be cut to fit
almost any size exactly.
• Safer than wheels - no tipping and
zero rollback.
POWER FEEDER
$299.00
MODEL 20-100
• Fully adjustable - fits on a variety of
machines.
• Variable speeds 6.5 to 40 FPM in
forward or reverse.
• Powerful 1/8 HP motor.
$379.00
Item 50-EXBC10
$69.00
Reg. $439.95
$479.00
Item 50-EXBC14
Reg. $560.00
Reg. $89.00
12” DOVETAIL FIXTURE
$849.00
Reg. $380.00
ITEM 40-010
• Handles stock up to 12" wide and from
5/16" to 1 1/4" thick.
• Put the stock in position and pull the
handle to lock it into place.
• 1/2” Half-blind template included
(Item #40-016).
Reg. $990.00
POWER FEEDER
MODEL 20-220
• 3 rollers.
• 4 speeds; 9.5, 15, 25, 38 FPM
• Powerful 1/2 HP motor.
$179.00
Reg. $224.00
24” DOVETAIL FIXTURE
ITEM 40-020
• Male and female dovetail joints are cut
simultaneously.
• Side stops provided.
• 1/2” Half-blind template included
(Item #40-022).
3
$74.00
4” - 4 JAW SCROLL CHUCK
ITEM 25-105: (1” - 8)
For 25-100, 25-200, 160 & 16018
ITEM 25-605: (1 1/4” - 8)
For 25-600, 25-650, 260 & 26020
FITS MOST 12” - L
22” FLOOR MODEST
LATHES WITH CA
BEDWAYS
NEW
Digital inverter
electronic
variable speed
14” X 30” WOOD LATHE
• Heavy-duty cast-iron bed
for stability and minimal
vibration.
• Headstock pivots 360° with
positive stops at 45° ,90°
and 180° for multi-position
outboard turning.
• Electronic inverter for 2 variable
speed ranges: 80 to 1600 &
150 to 3750 RPM.
• Powerful 1 HP motor.
$429.00
WOOD LATHE DUPLICATOR
ITEM 25-036
Creates perfectly matched spindles
with ease. Extruded aluminum base
and carriage. Smooth hand wheel
controlled rack & pinion system. High
speed steel cutter.
$1399.00
Model 25-300
INCLUDES ONE
110 V - 15 AMP
SOCKET
INCLUDES
FLOOR-MOUNT
BOLT-DOWN BRACKET
(Fasteners not included)
Variable
reversible
speed
Variable
speed
Made in
Made in
Canada
Canada
20” WOOD LATHE
• Extra heavy-duty, cast-iron
headstock, tailstock, and bed.
• 24 1/2” swing over gap capacity.
• 375 to 3300 RPM variable speed.
• 38” distance between centers.
• Magnetic safety switch.
• Powerful 2 HP motor.
Reg. $1890.00
$4599.00
Model 26020-1-M2
Reg. $5984.00
$2799.00
Model 16018-2-M1
18” WOOD LATHE
•
•
•
•
•
Reg. $2849.00
Extra heavy-duty, cast-iron headstock, tailstock, and bed.
21” swing over gap capacity.
500 to 3000 RPM variable speed.
38” distance between centers.
Powerful 1 HP motor.
Electronic
&
ri
va able speed
ad
he
pivoting
VARIABLE SPEED MAXI-LATHE VS+
• Quick lock control levers easily
position tool-rest.
• Maximum distance of 17 5/16”
between centers.
• 3 variable speed ranges:
300-900, 600-1800 &
1200-3600 RPM.
• Powerful 3/4 HP motor.
4
$549.00
Model 25-200 M1
Reg. $810.00
$1799.00
Model 25-650 M1
16” X 42” WOOD LATHE
•
•
•
•
Reg. $2400.00
Heavy-duty cast-iron bed for minimal vibration.
Headstock swivels 360° with 45° and 90° positive stops.
Electronic inverter for variable speed adjustment (0- 3750 RPM).
Powerful 1 1/2 HP motor.
Extra long
55 1/4” tables
$649.00
20” WOOD LATHE
80-100L
Model 80-100L & 80-150L M1
Made in
Canada
• Extra heavy-duty, cast-iron
headstock, tailstock, and bed.
• 24 1/2” swing over gap
capacity.
• 4 variable speeds
(0 to 3000 RPM).
• Quick release speed
changing lever.
• 38” distance between centers.
• Magnetic safety switch.
• Powerful 2 HP motor.
80-150L
rsible
4 variable / reve onic
tr
ec
el
speeds with
l
ro
nt
co
Reg. $890.00
$4659.00
Model 26020VDR-M2
Reg. $6088.50
6” DELUXE JOINTER
• Large surface, ground cast-iron tables.
• Large, heavy-duty, center-mounted cast-iron
fence with 90° and 45° positive stops.
• Independent in-feed and out-feed table
adjustment hand wheels (80-100L only).
• Quick lever table adjustment (80-150L only).
• Jackscrew system for quick, easy knife
adjustment.
• Powerful 1 HP motor.
Made in
Canada
$1299.00
Model 40-250 M1
Reg. $1900.00
3/4” SPINDLE WOOD SHAPER
• 1/4” & 1/2” router bit adapters included.
• Two spindle speeds
(8000 & 10,000 RPM) with reverse.
• Magnetic starter with thermal
overload protection.
• Powerful 3 HP motor.
$3990.00
Model 40-450
M1, M2, M3
M1 Reg. $5055.00
M2, M3 Reg. $5245.00
1 1/4” HEAVY-DUTY
PRODUCTION SHAPER
•
•
•
•
Heavily ribbed, solid cast-iron table.
5 speeds with reverse.
2 emergency stop buttons.
Magnetic switch with thermal
overload protection.
• 5 HP motor (M1) &
7 1/2 HP motor (M2, M3).
Made in
$8590.00
Reg. $9773.50
14” RADIAL ARM SAW
• High-quality steel base.
• Positive stop at 0°, 45° and 90°
for tilt & pivot.
• Rod and blade protectors with
anti-kickback fingers.
• Powerful 3 1/2 HP motor.
$3299.00
Model 480-1-M2
Reg. $4400.00
8” DELUXE JOINTER
• Heavy-duty cast-iron table.
• 38” heavy-duty fence system.
• Cutter head mounted on two sealed permanently
lubricated bearings.
• Magnetic safety switch.
• Powerful 1 1/2 HP motor.
$1499.00
Model 80-200L M1
Canada
Model V-154-M2
Extra long
74” tables
$369.00
Model 40-040
Reg. $445.00
ROUTER TABLE
• Independently adjustable left and
right fences.
• Includes 12” x 9” router insert plate,
starting pin, and 2 removable insert
rings (permitting 3 different diameters: 1 1/4”, 2 5/8” & 3 7/8”).
• Movable switch with outlet for
convenient.
Reg. $1860.00
$2290.00
Model 80-200LHC M1
Reg. $2800.00
8” DELUXE JOINTER
8” HELICAL CUTTER HEAD
4 ROWS, TOTAL: 22 INSERTS
• Large surface, ground cast-iron tables.
• Heavy-duty, three-knife cutter head for clean,
fast, superior finish cuts.
• Independent in-feed and out-feed table
adjustment hand wheels. Built-in rabbeting
ledge.
• Magnetic switch for added safety.
• Powerful 2 HP motor.
5
$849.00
$1499.00
Model 15-005 M1
Model 15-010 M1
Reg. $1095.00
$939.00
Model 15-005S M1
Reg. $1185.00
6” X 89” EDGE BELT SANDER
• Sanding belt operates at any angle from horizontal to vertical.
• Graphite covered steel plate for reduced friction and extended
belt life.
• Oscillating feature (15-005S M1 only).
• Powerful 1 1/2 HP motor.
$379.00
24” HORIZONTAL DRUM SANDER
•
•
•
•
•
Steel frame and heavy-duty base.
High quality variable speed conveyor belt.
3-20 FPM variable feed speed.
Magnetic safety switch.
Conveyor belt equipped with removable key
safety switch.
• Powerful 2 HP main motor.
Heavy-duty
-in
base with built
ea
ar
e
storag
$1099.00
Model 15-020 M1
Model 15-220 M1
TILTING TABLE
OSCILLATING SPINDLE SANDER
Reg. $445.50
• Rotating & oscillating effect ensures
exceptional finishing results.
• Precision ground cast-iron tilting table.
• 5 interchangeable spindle assemblies: 1/4", 1/2",
5/8", 1 1/2", 2" dia. with 100 grit sandpaper.
• 1720 RPM spindle speed.
• Powerful 1/2 HP motor.
6
• Front table tilts left or right.
• Graphite backing reduces belt friction for longer belt life.
• Dynamically balanced 7’’ rubber drive roller and crowned
3’’ idler roller to ensure solid belt tracking.
• Oscillating feature (15-010S M1 only).
• Powerful 2 HP motor.
Reg. $1980.00
Reg. $1240.00
Bench-top
model
Reg. $2250.00
6” X 108” VERTICAL EDGE BELT SANDER
$1499.00
$999.00
$1769.00
Model 15-010S M1
Stainless
steel tank
INCLUDED
ACCESSORIES
* ALSO SOLD
SEPARATELY
* #10-306
* #10-310
* #10-309
* #10-314
* #10-323
#10300-35B
#10300-11B
* #10-332
* #10-334
Model 15-150 M1
Model 15-035DC M1
• Heavy-duty enclosed cabinet base protects
motor from sanding dust.
• 2250 LIN. FPM belt speed.
• Built-in dust collector.
• Powerful 1 1/2 HP motor.
Heavy steel
base for better
stability
Variable speed
conveyor belt
Improved belt
tracking system
6” X 48” BELT & 12” DISC SANDER
Reg. $1950.00
Reg. $1575.00
OSCILLATING SPINDLE SANDER
•
•
•
•
•
Heavy-duty cast-iron table and base.
Heavy-duty oil bath gearbox.
75 oscillations per minute.
1725 RPM spindle speed.
10 interchangeable spindles from 1/4” to 4”
including 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1 1/2”,
2”, 3” & 4”.
• Powerful 1 HP motor.
$259.00
Model 10-300 M1
Reg. $320.00
WET/DRY VACUUM CLEANER
• 10 gallon capacity.
• 2 speed 1 1/2 HP motor.
• Rated for heavy-duty maintenance &
janitorial use.
• 2 stage air filtration.
Made in
Canada
$4899.00
Model 130-1-M2
Reg. $5632.00
14” SINGLE SURFACE PLANER
• Cutter head mounted on 2 sealed
permanently lubricated bearings.
• 15 FPM feed speed (75 cuts per inch).
• 2 matching V-belts.
• Powerful 3 HP motor.
14” WOOD CUTTING BANDSAW
3/8” blade
included
$649.00
$69.00
1/2” blade
included
$1249.00
Reg. $1530.00
$2199.00
Large
cast-iron
extension
wings
Model 30-115HC M1
Model 30-300 M1
3 HP motor
Model 30-300HC M1
5 HP motor
$2495.00 $2999.00
Reg. $3105.00
Reg. $4275.00
12” resaw
capacity
$3199.00
Model 90-240 M1
Model 690-1-M2
Reg. $3767.50
•
•
•
•
2 feed speeds - 16 & 20 FPM.
Magnetic safety switch.
Triple V-belt drive for greater power.
The head of the machine is
equipped with anti-kickback fingers.
• Built-in wheels.
• Powerful 3 HP motor.
AVAILABLE
ON 30-115HC M1
15” HELICAL
CUTTER HEAD
4 rows, total: 44 inserts
Reg. $2600.00
2 feed speeds - 16 & 20 FPM.
Magnetic safety switch.
Cast-iron base, table, and head.
Built-in mobile base with one-step
lock-pedal.
• Dynamical balanced
heavy cast-iron wheels.
• Very silent, vibration
free operation.
• Graduated indicator for
blade tension.
• Powerful 1 1/2 HP
industrial motor.
15” SINGLE SURFACE PLANER
20” SINGLE SURFACE PLANER
•
•
•
•
Made in • Cast-iron frame.
Canada
Reg. $1890.00
15” SINGLE SURFACE PLANER
Same features as model
490-1-M1. 8 Blade speeds
(40 to 3250 Lin. FPM).
Heavy-duty cast-iron
gearbox.
15” WOOD CUTTING
BANDSAW
$1399.00
Reg. $1230.00
AVAILABLE:
15” METAL CUTTING
BANDSAW
Reg. $3547.50
• Solid, high quality,
precision-machined,
ribbed cast-iron table.
• Laser line marker.
• 2 blade speeds 1560 & 3190 FPM.
• Wide blade selection
(1/8”-1”).
• Powerful 2 HP
industrial motor.
$799.00
$4299.00
Model 490-1-M1
17” WOOD CUTTING
BANDSAW
Model 90-150 M1
• 2 feed speeds - 16 & 20 FPM.
• Magnetic safety switch.
• Heavy-duty cast-iron frame reduces
vibration for more precise planing.
• The head of the machine is
equipped with anti-kickback fingers.
• Powerful 3 HP motor.
wheels.
• Graduated indicator for blade tension.
• Powerful 1 HP
motor.
ITEM 590-1
$3099.00
ITEM 90-130
• Built-in dust collection
system.
• Laser line marker &
work light included.
• Precision aluminum
miter gauge.
• 8” super cutting
capacity.
• 2 blade speeds 2959 & 2315 FPM.
• Powerful 1 HP motor.
Model 30-115 M1
3/8” blade
included
OPTIONAL RISER
ATTACHMENT KIT
14” WOOD CUTTING
BANDSAW
• One-piece molded cast-iron frame.
Made in • Dynamically balanced heavy cast-iron
Canada
Model 90-125 M1
Reg. $835.00
3/8” blade
included
15” WOOD CUTTING BANDSAW
• Cast-iron frame & precision-balanced
aluminum wheels with replaceable
rubber tires.
• Rip fence & miter gauge included.
• 2 speeds (1800 & 3000 LIN.FPM).
• Blower device.
• Powerful 1 HP motor.
$1599.00 $2499.00
Model 30-125CE M1
Reg. $2485.00
Model 30-125CEHC M1
Reg. $3000.00
Large
cast-iron
extension
wings
AVAILABLE
ON 30-125CEHC M1
15” HELICAL
CUTTER HEAD
4 rows, total: 44 inserts
20” SINGLE SURFACE PLANER
•
•
•
•
2 feed speeds - 22 & 28 FPM.
Magnetic safety switch.
Built-in table rollers reduce friction.
Positive gear design for quick and
accurate table adjustments.
• Powerful 7 1/2 HP motor.
Large
cast-iron
extension
wings
AVAILABLE
ON 30-300HC M1
20” HELICAL
CUTTER HEAD
4 rows, total: 58 inserts
$3790.00 $5950.00
Model 30-360 M1
Reg. $5175.00
Model 30-360HC M1
Reg. $8035.00
Large
cast-iron
extension
wings
AVAILABLE
ON 30-360HC M1
20” HELICAL
CUTTER HEAD
4 rows,
total: 58 inserts
7
14” DRILL PRESS
17” DRILL PRESS
MODEL 75-150 M1
WITH REG. 5/8” CHUCK
• Rotating, 45° tilting, crankoperated worktable with
quick release clamp.
• Safety switch & adjustable
spindle tension return
spring.
MODEL 75-200RC M1
WITH REG. 5/8” CHUCK
• Rotating, 45° tilting, crankoperated worktable with
quick release clamp.
• Safety switch & adjustable
spindle tension return
spring.
• Industrial 1/2 HP motor.
• Industrial 3/4 HP motor.
• 12 spindle speeds
(280 - 3000 RPM).
Made in
$499.00
$1690.00
Canada
Reg. $600.00
Reg. $2299.00
MODEL 10-105CF M1
1 micron canister filter
MODEL 10-110CF M1
1 micron canister filter
Reg. $740.00
Reg. $880.00
$569.00
MODEL 10-105 M1
2 micron bag filter
$369.00
• 1321 CFM (air flow).
• Powerful 2 HP motor.
•
$449.00
Reg. $520.00
Reg. $700.00
1” HOLLOW CHISEL
MORTISER
INCLUDED
•
•
•
$1099.00
•
•
Reg. $1620.00
DUST COLLECTOR
• 2280 CFM (air flow).
• Powerful 3 HP motor.
SINGLE MACHINE
HOOK-UP KIT
$45.00
ITEM 10-100
•(10) 4” wire bail hose
clamps
• (1) 4” universal dust
hood outlet
• (2) 4” x 10’ polyethylene
flexible hose
• (6) Heavy-duty clear
plastic collector bags
• (1) Table saw dust hood
• (2) 4” blast gates
• (1) 4” Y fitting
$1099.00
$899.00
Reg. $1430.00
Reg. $1145.00
OPTIONAL OPEN
STAND UNIVERSAL
BASE
ITEM #75-045
$89.90
ITEM 10-200
Heavy-duty cast-iron
construction.
1/4”, 3/8”, 1/2”, & 3/4”
chisel & bit sets included.
Lateral and longitudinal
table movement.
Tilting head and swivel
fence.
Powerful 1 HP motor.
Model 75-075 M1
MODEL 10-210 M1
2 micron bag filter
TWO-MACHINE
HOOK-UP KIT
Tilting head with a
180° swivel.
Heavy-duty cast-iron
construction.
1/4”, 5/16”, 3/8”, & 1/2”
chisel & bit sets included.
Powerful 1/2 HP motor.
Model 75-050T M1
MODEL 10-210CF M1
1 micron canister filter
Reg. $375.00
• (2) 4” wire bail hose
clamps
• (1) 4” universal dust
hood outlet
• (1) 4” x 10’ polyethylene
flexible hose
• (3) Heavy-duty clear
plastic collector bags
•
$599.00
DUST COLLECTOR
$269.00
• 647 CFM (air flow).
• Washable, extra fine
2 micron filter bag.
• Powerful 1 HP motor.
•
MODEL 10-110 M1
2 micron bag filter
10-210CF M1
Reg. $514.00
•
INCLUDED
$749.00
MODEL 10-005 M1
DUST COLLECTOR
5/8” HOLLOW CHISEL
MORTISER
10-110CF M1
10-105CF M1
Reg. $330.00
• 1100 CFM
(air flow).
• Powerful
1 1/2 HP motor.
MODEL 34-01-M1
WITH REG. 1/2” CHUCK
WITH THREADED COLLAR
• 4 1/2” Spindle travel.
• 6 speeds
(460 to 4910 RPM).
• Head raises and lowers on
the column.
• Powerful 3/4 HP motor.
• 12 spindle speeds
(340 - 2800 RPM).
$289.00
DUST COLLECTOR
15” DRILL PRESS
$64.00
Top opening measures
9 1/4” x 12 3/4”
*
OPTIONAL
CLOSED STAND
ITEM #75-070
$229.00
sold
* Mortiser
separately