kitchen organizers - Spokane Hardware Supply, Inc.

Transcription

kitchen organizers - Spokane Hardware Supply, Inc.
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Hidden waste containers, pull out organizers, pantry storage with soft close too. Our selection of
kitchen organizers can turn a basic kitchen from drab to fab with just a few convenient upgrades!
Kitchen Organizers...................177-216
Waste and Recycling Containers........... 177-183
Sensomatic Assisted Opening System........................................ 183
Woven Pull Out Baskets.................................. 187
Wall / Upper Cabinet Organizers................... 188
Wood Breadboards & Slides........................... 214
Mixer Lifts.................................................. 214-215
Pull-Out Towel Bars.......................................... 215
Undersink Drip Trays....................................... 216
Cabinet Louver / Ventilator....................216, 248
Lazy Susans / Corner Cabinetry............. 189-198
Lazy Susan Hardware and Swivel Bearings....................... 189-190
Full Circle Lazy Susans.............................................................. 190-193
D-Shape Lazy Susans......................................................................... 193
Kidney Lazy Susans................................................................... 194-195
Pie-Cut Lazy Susans............................................................................ 196
Blind Corner Lazy Susans........................................................ 197-198
Pantry Organizers / Blind Corner........... 197-200
Waste and Recycling Containers
Base & Pull Out Organizers..................... 184-187
Wood Tambour and Track Systems....... 212-213
Door Storage and Spice Racks............... 201-202
Drawer Organizers / Cutlery Trays......... 202-205
Sink Front Tip Out Trays.......................... 205-208
Tip Out/False Front Tray Hinges............................................ 205-208
False Front Tray Clips.......................................................................... 208
Tray Dividers...................................................... 209
Wine, Stemware and Plate Racks........... 210-211
Appliance Garages........................................... 212
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
177
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Waste and Recycling Containers
Waste Container Lid
Vibo Series
Pull-Out Waste Containers
Vibo Series
New Item!
• A practical lid with dishwasher safe anti-smell filter.
• For use with Salice Vibo waste containers.
• Gray/Silver.
• 1/box. Sold individually.
New Item!
• Soft-close, full-extension slides; bottom mount.
• Patented door-mount bracket system has 3 way adjustability for alignment of the cabinet door. Vertical, lateral and frontal adjustment.
• Waste container equipped with handle to keep your bag inside and lift
cans up.
• 100% made in Italy.
• Silver gray bins & chrome hardware.
• 1/box. Sold individually.
Width
Depth
Height
QPAM12135C 1/35 Qt.
Product #
Bins/Quarts
12”
19-5/8”
21-7/8”
QPAM15228C 2/32 Qt.
15”
19-5/8”
21-7/8”
QPAM18228C 2/32 Qt.
18”
21-5/16”
20-5/16”
QPAM21235C 2/35 Qt.
21”
21-5/16”
20-5/16”
Product #
Description
Width
Depth
QPCOLAMF
for 32 Qt.
8-5/8”
14-3/8”
QPCOXLMF
for 35 Qt.
8-5/8”
17-1/4”
Waste Container Further Bins
Vibo Series
New Item!
Waste and Recycling Containers
• Salice Vibo “Further Bins” can be put inside the principal bins on waste
container units or also used externally attached to the cabinet door.
• Silver gray polystyrene bins with small handle.
• 1/box. Sold individually.
Replacement Waste Container Bins
Vibo Series
Product #
Bins/Quarts
Width
Depth
Height
QPAM03C
1/3.2 Qt.
7-23/32”
7-7/8”
3-9/16”
QPAM05C
1/5.3 Qt.
7-23/32”
7-7/8”
7-3/32”
New Item!
• Waste container equipped with handles for easy gripping and fixing the
bag along the perimeter of the bin.
• Silver gray polystyrene.
• 1/box. Sold individually.
178
Product #
Size
Height
Width
Depth
QPAM128C
32 Qt.
18-1/8”
8-5/8”
14-3/8”
QPAM135C
35 Qt.
18-1/8”
8-5/8”
17-1/4”
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Undermount Waste Containers
Door Mount Waste Containers
• Heavy-duty undermount slides with soft-close technology.
• Unique, washable solid backsplash and floor for easy cleaning.
• Concealed slide hardware.
• Optional decorative rail accents may be customized to match countertops.
• Optional lids fit securely and hold bags in place
• Installs in minutes with self-aligning brackets and only four screws.
• New door mount brackets accommodate overlay or inset doors.
• 1/box. Sold individually.
• Features Rev-A-Motion™ Soft-Open/Soft-Close slide technology that
provides smooth operation even under the heaviest of loads.
• Easy to clean durable molded base.
• Made in the USA.
• Adjustable door mount brackets fits all door types and allows tilt and
skew.
• Silver bins with aluminum hardware.
• 1/box. Sold individually.
USC Series
5149 Series
Width
Depth
Height
Color
Product #
Bins/
Size
Depth
Height
Min.
Opening
Frameless
USC12-1-50WH 1/50 Qt.
12”
22-7/16”
23-5/16”
White
5149-15DM-117
1/35 Qt. 12-1/8”
22”
19-1/2”
12-1/4”W
USC15-2-35PT
2/35 Qt.
14-13/16” 22-5/8”
19-5/16”
Silver
5149-15DM18-117
1/35 Qt. 12-1/8”
18”
19-1/2”
12-1/4”W
USC18-2-50PT
2/50 Qt.
15-3/8”
23-1/4”
Silver
5149-1550DM-117
1/50 Qt. 12-1/8”
22”
23-1/2”
12-1/4”W
5149-1527DM-217
2/27 Qt. 12-1/8”
22”
19-1/2”
12-1/4”W
5149-18DM-217
2/35 Qt. 14-3/16” 22”
19-1/2”
14-1/2”W
5149-2150DM-217
2/50 Qt. 15-5/8”
23-1/2”
15-3/4”W
Product #
Bins/
Quarts
22-7/16”
Waste Container Lid Only
USC Series
Width
22”
5349 Series
• For use with the Knape and Vogt Series 35qt. waste containers (sold
separately).
• Conceals waste and traps odors inside the waste bin.
• Lid adds 3/4” (19mm) to bin height.
• 1/box. Sold individually.
Product #
Description
Color
QT35LB-PT
for 35 Qt.
Silver
• Heavy-duty brushed aluminum soft-closing slides provide exceptional
support and stability eliminating side-to-side movement and a fully
adjustable 10” H door mount frame.
• White bins with aluminum hardware.
• Built-in rear storage area for bags on single container units.
• 1/box. Sold individually.
TEL
509.535.1663 TOLL-FREE
Product #
Bins/Size
Width
Depth
Height
5349-15DM-1
1/35 Qt.
10-3/4”
21-15/16”
19-1/4”
5349-1550DM-1
1/50 Qt.
10-3/4”
21-15/16”
23-1/8”
5349-18DM-2
2/35 Qt.
14-13/16”
21-7/8”
19-1/4”
5349-1527DM-2
2/27 Qt.
11-11/16”
22-1/4”
18-15/16”
5349-2150DM-2
2/50 Qt.
14-13/16”
22-1/8”
22-1/8”
800.888.1663
www.spokanehardware.com
Waste and Recycling Containers
Door Mount Waste Containers
179
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Door Mount Extender Kit
Top Mount Soft-Close Waste Container
5349 Series
4WCTM-BBSC Series
• Designed for Rev-A-Shelf’s 5349 Series aluminum frame pull-outs.
• Made to be used on a product that might fall in a thin, delicate, or
seamed area of the cabinet door.
• Attaches to the existing door bracket for extended mounting adjustability for any cabinet door style where previously a sub-door might have
been required.
• Allows for 3/4” to 2-1/2” of adjustment per side.
• 1/box. Sold individually.
Product #
Finish
5345-DM-KIT-1
Chrome
Bottom Door Mount Waste Containers
4WC Series
• 1-1/2” over-travel soft-close ball-bearing slides.
• Single 35qt. includes rear polymer storage bin.
• Innovative floating rear bracket ensures soft-close functionality even
when your cabinet wood swells or shrinks.
• Pre-assembled door mounting brackets.
• Silver bins.
• 1/box. Sold individually.
Product #
Bins/Size
Width
Depth
Height
4WCTM-12BBSCDM-1
1/35 Qt.
12”
22-3/4”
17-7/8”
4WCTM-1550BBSCDM1
1/50 Qt.
12”
23-1/4”
21-3/4”
4WCTM-15BBSCDM-2
2/27 Qt.
12”
23-1/4”
17-3/4”
4WCTM-18BBSCDM-2
2/35 Qt.
15”
22-3/4”
17-7/8”
4WCTM-2150BBSCDM2
2/50 Qt.
18”
23-1/4”
21-3/4”
Top Door Mount Waste Containers
4WCTM Series
Waste and Recycling Containers
180
• Solid maple construction. Containers encased in a durable wood base to
allow easy retrieval of the waste bins
• Features 150lb. full-extension, ball bearing slides with pre-assembled
door mount brackets.
• White bins.
• 1/box. Sold individually.
Product #
Bins/Size
Width
Depth
Height
4WC-15DM-1
1/35 Qt.
11-1/4”
21-3/4”
19-1/4”
4WC-18DM-2
2/27 Qt.
14-1/4”
21-3/4”
19-1/4”
TEL
509.535.1663 TOLL-FREE
• Designed for 1-1/2” face frame cabinets.
• Solid maple construction.
• 1-1/2” over-travel ball-bearing slides.
• Single container units include rear polymer storage bin.
• Adjustable rear brackets for cabinet depth variations.
• Pre-assembled door mounting brackets.
• White bins.
• 1/box. Sold individually.
Product #
Bins/Size
Width
Depth
Height
4WCTM-12DM-1
1/35 Qt.
12”
22-3/4”
17-7/8”
4WCTM-1550DM-1
1/50 Qt.
12”
23-1/4”
21-3/4”
4WCTM-15DM-2
2/27 Qt.
12”
23-1/4”
17-3/4”
4WCTM-18DM-2
2/35 Qt.
15”
22-1/2”
17-7/8”
4WCTM-2150DM-2
2/50 Qt.
18”
23-1/4”
21-3/4”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Quad Recycle Center
Recycle Center w/Soft-Close
• Designed for 1-1/2” face frame cabinets.
• Solid maple construction.
• 1-1/2” over-travel ball-bearing slides.
• Adjustable rear brackets for cabinet depth variations.
• Pre-assembled door mounting brackets.
• White bins.
• 1/box. Sold individually.
• Beautiful chrome frame, white bins.
• Features full-extension soft-close ball-bearing slides.
• Removable containers for easy cleaning.
• Includes door mount brackets for attaching your own door.
• Set Contents: 3 - 25qt. polymer containers, 1 canvas bag, full extension
150lb. slides, door adjustment mechanism; spring loaded self closing
feature.
• 1/box. Sold individually.
4WCTM Series
Product #
Bins/Size
4WCTM-27-4 4/27 Qt.
5BBSC Series
Width
Depth
Height
24”
23-1/4”
18”
Spacer Kit For Face Frame Applications
Product #
Width
Depth
Height
5BBSC-WMDM24-W
20”
22-1/4”
20-1/4”
Recycling Center
4WCTM Series
PRC24 Series
Product #
4WCTM-SP-KIT
• Features KV heavy-duty ball-bearing slides.
• Slides assembly: 23-3/8”W,.
• 25lbs. max per bin, not intended for bulk storage.
• White bins and hardware.
• 1/box. Sold individually.
TEL
509.535.1663 TOLL-FREE
Product #
Bins/Size
Width
Depth
Height
PRC24-4-27-W
4/27 Qt.
24”
23”
19”
800.888.1663
www.spokanehardware.com
Waste and Recycling Containers
• For use with Rev-A-Shelf 4WCTM Waste containers.
• Used in face frame applications, for custom installations it will add up to
1-1/2” (38mm) of width.
• 1/box. Sold individually.
181
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Single Pull-Out Waste Containers
Heavy-Duty RV Door Mount Kit
RV Series
RV Series
• Sturdy wire support structure and high quality vinyl coating.
• 3/4 or full-extension polymer bearing slide assembly; S-suffix denotes
full extension slides.
• Fully assembled for ease in installation.
• White bins and hardware.
• 1/box. Sold individually.
• Door Mounting Kit for Rev-A-Shelf RV Series/HPRV/HRV Hampers.
• Six-way adjustable door mounting bracket for easy installation and
simple job site adjustments.
• Includes a complete set of brackets, fasteners and spacers for installation
on any door style.
• White finish.
• 1/box. Sold individually.
Product #
Description
Product #
Bins/Size
Width
Depth
Height
RV-DM-KIT
Door Mount Kit
RV-814PB
1/20 Qt.
8-1/2”
14-5/8”
16-5/8”
RV-EURO-ADAPTOR
Adapter for RV-814PB
RV-9PB
1/30 Qt.
9-1/2”
22”
19-1/4”
RV-12PB
1/35 Qt.
10-5/8”
22”
19”
RV-12PB-L
1/35 Qt.
10-5/8”
22”
20-3/8”
RV-12PB-50-S
1/50 Qt.
10-3/4”
22”
24-1/4”
RV-14PB-S
1/20 Qt.
14-5/8”
16”
16-3/8”
RV-18PB-1
1/35 Qt.
14-3/8”
22”
19-1/4”
Waste Container Lids
RV Series
Double Pull-Out Waste Containers
RV Series
Waste and Recycling Containers
182
• Rev-A-Shelf flip-up lids for the most popular waste containers.
• Will add 1” to the height of product you are using. Be sure to take this
dimension into account when measuring your cabinet.
• 1/box. Sold individually.
• Sturdy wire support structure and high quality vinyl coating.
• Full-extension polymer bearing slide assembly.
• Fully assembled for ease in installation.
• White bins and hardware.
• 1/box. Sold individually.
Product #
Bins/Size
Width
Depth
Height
RV-15PB-2S
2/27 Qt.
11-13/16”
22-1/4”
19-1/8”
RV-18PB-2S
2/35 Qt.
14-3/8”
22”
19-1/4”
TEL
509.535.1663 TOLL-FREE
Product #
Description
Color
RV-35-LID-1
for 35 Qt.
White
RV-35-LID-17-1
for 35 Qt.
Silver
RV-50-LID-1
for 50 Qt.
White
RV-50-LID-17-1
for 50 Qt.
Silver
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Replacement Waste Container Bins
Pivot-Out Waste Container
8-010 Series
• Replacement bins for Rev-A-Shelf waste containers.
• Finish: White.
• 1/box. Sold individually.
Product #
Size
Use with
Height
Width
Depth
6700-61-52
30 Qt.
9-1/2”
15-3/8”
27 Qt.
17-3/4”
11-3/8”
11-3/8”
RV-20-52
20 Qt.
15”
8-1/8”
14-1/4”
RV-35-52
35 Qt.
17-7/8”
14-3/8”
10-1/2”
RV-50-52
50 Qt,
RV-9
RV-15, 4WCTM-15,
4WCTM-27
RV-8, RV-14
RV-12, RV-18,
5149, 4WCTM
RV, 4WCTM, 5149,
5349
18”
RV-1024W-52
21-3/4”
10-3/4”
14-3/4”
Undersink Mount Waste Containers
8-785 Series
The pivot out waste container is ideal for keeping garbage out-of-sight yet
conveniently accessible under the kitchen or vanity sink. As the cabinet
door opens, the lifting mechanism raises the lid enabling the container to
pivot-out with the door
• Features an inner polymer container with built-in handle for easy
removal.
• Designed for frameless cabinets. If using on a face frame cabinet you will
need to place a spacer behind the unit.
• Stainless steel bin.
• Minimum Cabinet Opening: 13-3/4in.(350mm)W
• 1/box. Sold individually.
Product #
Bin Size
Width
Depth
Height
8-010314-15
15 Liter
11”
10-1/2”
15-3/4”
Grass Sensomatic Electronic Assisted Opening
System
Product #
Width
Depth
Height
8-785-30-2SS
10-1/4”
18-3/4”
15-3/16”
8-785-30-DM2SS 10-1/4”
18-3/4”
15-3/16”
Grass Sensomatic electronically-assisted opening mechanism for waste
bin application. With the touch-sensitive Sensomatic device all you need
is a gentle touch anywhere on the front of the drawer to automatically
open the drawers. The action is steady, precise and ingenious.
Waste and Recycling Containers
• Ideal for kitchen, vanity and wet bar sink base cabinets, fits conveniently
in the limited spaces around existing plumbing.
• Features two separate stainless steel containers (one 10 liter and one 20
liter bin), a covered lid, built-in handles for easy removal and 75lb. fullextension ball bearing slides.
• Brushed stainless steel bins.
• Minimum Cabinet Opening: 12” (305mm)W.
• 1/box. Sold individually.
• Set includes: (1) Opening unit, (1) Base frame, (1) Power supply unit, (1)
Power cord: (4) Front bumpers (F121100296223).
• Can be used with the Grass DWD-XP drawer systems, Rev-A-Shelf
5149/5349 Series Waste Pull-Outs and Blum Tandum.
• Opening system only, Pull-Out Waste bins not included.
• 1 set/box. Sold per set.
Product #
F121100698201
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
183
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Base Organizers and Pull Out Baskets
Base Cabinet Filler Organizer
432 Series - Wood Classics
Pull-Out Base Organizer with Soft Close
448 Series - Wood Classics
• Concealed, Blumotion soft-close slide design.
• Adjustable rear wall that prevents items from falling behind the pullout.
• Adjustable shelves with chrome rails.
• Micro-adjustment screw for precise door alignment.
• Adjustable door mount brackets provide up to 5 inches of flexibility for
trouble-free installation on any door style.
• Adjustable rub bushings prevents side-to-side movement.
• Made from maple with a UV clear coated finish.
• 1/box. Sold individually.
Base Organizers and Pull Out Baskets
184
Product #
Width
Depth
Height
448-BCSC-5C
5”
21-3/4”
25-1/2”
448-BCSC-8C
8”
21-3/4”
25-1/2”
This pull-out organizer transforms decorative filler panels into functional
storage space.
• Adjustable shelves with chrome rails.
• 100lb. full-extension, tri-slide design for complete stability and easy
installation.
• Made from maple with a UV clear coated finish.
• 1/box. Sold individually.
Product #
Width
Depth
Height
432-BF-3C
3”
23”
30”
432-BF-6C
6”
23”
30”
432-BF-9C
9”
23”
30”
KitchenMate Base Pantry Filler
Pull-Out Base Organizer
448 Series - Wood Classics
• Designed for full-height, face frame base cabinets.
• Features adjustable shelves with chrome rails.
• 100-150lb. full-extension, patented “tri-slides” for complete stability and
easy installation.
• Adjustable door mount brackets provide up to 5 inches of flexibility for
trouble-free installation on any door style.
• Made from maple with a UV clear coated finish.
• 1/box. Sold individually.
Product #
Width
Depth
Height
448-BC-5C
5”
22-1/2”
25-1/2”
448-BC-8C
8”
22-1/2”
25-1/2”
448-BC-11C
11”
22-1/2”
25-1/2”
TEL
509.535.1663 TOLL-FREE
• Simply installs between adjacent cabinets to provide valuable storage
space.
• Features KV 8405 100lb heavy-duty full extension ball bearing slides with
adjustable shelves.
• Unique magnetic push latch, ours don’t pull out, they push in.
• Solid maple and plywood construction.
• 1/box. Sold individually.
Product #
Width
Depth
Height
P0463MNL1
3”
22-7/8”
30”
P0466MNL1
6”
22-7/8”
30”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Door Mount Kit for 5WB Baskets
5-WB1 Series
5WB Series
• Ideal for organizing your valuable pots, pans and other bulky items!
• Features 100lb. full-extension, ball-bearing slides and heavy-duty chrome
plated frame.
• Slide unit installs easily with only 4 screws.
• Optional door mount brackets available.
• Finish: Chrome.
• 1/box. Sold individually.
Product #
Width
Depth
Height
Min.Opening
5WB1-0918-CR
8-3/8”
18”
7”
8-1/2”
5WB1-1218-CR
11-3/8”
18”
7”
11-1/2”
5WB1-1220-CR
11-3/8”
20”
7”
11-1/2”
5WB1-1222-CR
11-3/8”
22”
7”
11-1/2”
5WB1-1520-CR
14-3/8”
20”
7”
14-1/2”
5WB1-1522-CR
14-3/8”
22”
7”
14-1/4”
5WB1-1822-CR
17-3/8”
22”
7”
17-1/2”
5WB1-2122-CR
20-3/8”
22”
7”
20-1/2”
• This kit can be added to all Rev-A-Shelf 5WB-Series pull-out baskets to
make units door mountable.
• The two piece bracket allows for easy installation and simple job site
adjustments.
• Flexible mounting eliminates need for sub-door.
• 1/box. Sold individually.
Product #
Finish
5WB-DMKIT
Silver
KITCHEN ORGANIZERS
Single Pull-Out Basket
Pull-Out Base Organizer
548 Series
Double Pull-Out Baskets
• Designed for 9” base cabinets.
• Universal brackets, reversible for non-handed operation.
• Ball-bearing slides and door mountable frame.
• Mounting screws and spacers included for slides.
• Finish: chrome.
• 1/box. Sold individually.
• Ideal for organizing your valuable pots, pans and other bulky items!
• Features 100lb. full-extension, ball-bearing slides and heavy-duty
chrome plated frame.
• Slide unit installs easily with only 4 screws.
• Optional door mount brackets available.
• Finish: Chrome.
• 1/box. Sold individually.
Product #
Width
Depth
Height
Min.Opening
5WB2-0918-CR
8-3/4”
18”
19”
8-1/2”
5WB2-1218-CR
11-3/4”
18”
19”
11-1/2”
5WB2-1222-CR
11-3/4”
22”
19”
11-1/2”
5WB2-1522-CR
14-3/4”
22”
19”
14-1/2”
5WB2-1822-CR
17-3/4”
22”
19”
17-1/2”
5WB2-2122-CR
20-3/4”
22”
19”
20-1/2”
TEL
509.535.1663 TOLL-FREE
Product #
Width
Depth
Height
548-06CR
5-1/2”
19-3/4”
19-1/2”
548-10CR-1
9-3/4”
16”
18”
800.888.1663
www.spokanehardware.com
Base Organizers and Pull Out Baskets
5WB2 Series
185
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Wood Pull-Out Drawer
Undersink Basket w/Removable Caddy
• Dovetail construction and maple veneer plywood for strength and a
naturally beautiful finish.
• Simple installation and concealed bottom mount, 50lb, 3/4 extension
euro slides.
• 1/box. Sold individually.
4WDB Series - Wood Classics
544 Series
Product #
Width
Height
Depth
• Adjustable handle that slides either direction to work around plumbing
or other obstructions.
• Reversible/removable top tray is ideal for paper towel or sponge storage.
• Completely removable to take cleaning products with you.
• Leak proof trays.
• Finish: Chrome.
• 1/box. Sold individually.
4WDB-12
11”
5-5/8”
18-1/2”
4WDB-15
14”
5-5/8”
22-1/2”
Product #
Width
Depth
Height
544-10C-1
11-1/4”
16-1/4”
19-1/2”
Under Sink Basket
Pull-Out Vanity Grooming Organizer
USB Series
Base Organizers and Pull Out Baskets
186
445 Series - Wood Classics
• Features a unique, two-tier design.
• Accessory top basket is non-handed, removable and offset to avoid
plumbing for undersink applications.
• Note: Add 3/4” (19mm) to width requirement for frameless cabinets.
• Finish: White.
• 1/box. Sold individually.
Product #
Width
Depth
Height
USB11TM-W
12-1/8”
19-1/8”
9-5/16”
USB14TM-W
15-1/8”
19-1/8”
9-5/16”
TEL
509.535.1663 TOLL-FREE
• Great for organizing hair dryers, curling irons and other grooming items.
• 100lb. full-extension, tri-slides for complete stability and easy installation.
• Includes pull-out shelving system, 2 adjustable shelves with stainless
steel bins, adjustable door mount brackets, full extension tri-slides, rub
bushings.
• All natural wood finish.
• 1/box. Sold individually.
Product #
Width
Depth
Height
445-VCG25-8
8”
19”
25-1/2”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Bottom Mount Slides for Custom Pull-Outs
• Heavy-duty ball-bearing bottom mount slides.
• White, 100lb. load rating.
• 1 pr/box. Sold per pair.
• Keeps cabinets organized and eliminates clutter.
• Solid, clear maple body and 7 solid metal, custom-made hooks.
• Gliding hardware designed with a 100 lb. capacity.
• Weighted hooks and synchronized motion keeps cookware quiet.
• Designed to fit any standard depth cabinet - installation in a full height
cabinet is recommended to hang larger cookware.
• Top of unit to bottom of hooks: 5”.
• Rear mounting bracket (for face frame installation) will add 3/4” to overall
length.
• Lifetime Warranty.
• 1/box. Sold individually.
Product #
Length
Width
Height
Finish
GLDWR7HK
22”
4-1/4”
3”
Clear Maple
Product #
Length
BM-3832-18W-52
18”
BM-3832-20W-52
20”
BM-3832-22W-52
22”
KITCHEN ORGANIZERS
Glideware Pull-Out Rack with Hooks
Wicker/Rattan Pull Out Baskets
Rev-A-Shelf Woven Basket with Rails
Hooks for Glideware
Product #
Finish
GLDWR2HK
Satin Nickel
Bring a natural look to your design with beautiful woven baskets. Perfect
for storing fruit, vegetables and much more!
• Machine washable canvas liner.
• Baskets secured within a natural maple frame, complete with built-in
handles.
• Set Contents: 1 woven basket, 1 canvas liner, and 2 side mount rails.
• Rail width is trimmable to fit various openings. Offered in standard and
euro sizes.
• 1/box. Sold individually.
TEL
509.535.1663 TOLL-FREE
Product #
Width
4WV-15I
14-1/2” to 12-1/4” 21-1/4”
7-3/8”
4WV-18I
17-1/2” to 15-1/4” 21-1/4”
7-3/8”
4WV-320I
14-1/8” to 13-5/8” 17-3/4”
7-11/16”
4WV-420I
18-1/8” to 17-1/2” 17-3/4”
7-11/16”
4WV-520I
22-1/8” to 22-1/2” 17-3/4”
7-11/16”
800.888.1663
Depth
Wicker/Rattan Pull Out Baskets
• Solid metal, custom-made, weighted hooks designed to fit the Glideware
Racks.
• 1 pr/box. Sold per pair.
Height
www.spokanehardware.com
187
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Wall/Upper Cabinet Organizers
KitchenMate Wall Pantry Filler
Wall Pull-Out Shelving System
448-WC Series - Wood Classics
• Designed for installation in wall 9” & 12” cabinets.
• Up to 5 shelf surface areas by utilizing the top of the unit to provide
another shelf in taller 36” or 42” applications.
• Patented door mount brackets provide up to 5” of flexibility for installation on any door style.
• Made from maple with UV clear coat.
• Set Includes: Pull-out shelving system, 3 adjustable shelves with chrome
rails, 100lb. full-extension, tri-slides.
• 1 set/box. Sold per set.
Product #
Width
Depth
Height
448-WC-05C
5”
10-3/4”
26-1/4”
448-WC-08C
8”
10-3/4”
26-1/4”
• Simply installs between adjacent cabinets to provide valuable storage
space.
• Features KV 8405 100lb heavy-duty full extension ball bearing slides with
adjustable shelves.
• Unique magnetic push latch, ours don’t pull out, they push in.
• Solid maple and plywood construction.
• 1 set/box. Sold per set.
Product #
Width
Depth
Height
P0473MNL1
3”
12”
30”
P0476MNL1
6”
12”
30”
Pull-Down Shelving System
5PD Series - Premiere Chrome
Wall Filler Cabinet Organizer
Wall/Upper Cabinet Organizers
432 Series - Wood Classics
• Designed to be installed between two cabinets, only the face must be
added.
• Made from maple with UV clear coat.
• Set Includes: 1 organizer with 100lb. full-extension tri-slides and adjustable shelves with chrome rails.
• 1 set/box. Sold per set.
188
Product #
Width
Depth
Height
432-WF-3C
3”
11-1/8”
30”
432-WF-6C
6”
11-1/8”
30”
TEL
509.535.1663 TOLL-FREE
• Two-tier pull-down shelf that brings hard-to-reach items down 10” while
pulling out 16-3/4” from the cabinet.
• Gas assisted lifting/lowering mechanism provides stability
• Locking arm holds shelf in down position for complete accessibility.
• Sleek, chrome plated wire design.
• Side and bottom mount brackets.
• 1 set/box. Sold per set.
Product #
Width
Height
Depth
5PD-24CRN
22-1/4”
18-5/16”
10-3/8”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Lazy Susan Pivot Hardware
Lazy Susan Hardware and Swivel Bearings
for Custom Wood Shelves
Lazy Susan Turntable Swivels
• Ball bearing turntable.
• May be used for rotating book racks, serving trays, kitchen storage racks,
etc.
• Zinc finish.
• 10/box. Sold individually.
Product #
Size
Load Rating
9547
4” Square
350 lbs.
9548
6” Square
500 lbs.
9549
12” Round
1000 lbs.
• Used for custom wood shelf applications.
• Aluminum.
• 12/box. Sold individually.
Product #
Description
P19
Post - 27-1/2” x 1-1/16”
PS4
Positioning Stop
R14B
Full Circle Shelf Support
R14H
Pivot Hardware Set
SB2
Pie Cut Shelf Support
KITCHEN ORGANIZERS
Lazy Susans/Corner Cabinetry
2-Shelf Full Circle Hardware Set
for Custom Wood Shelves
Lazy Susan Turntable Swivels
Product #
Size
Load Rating
TR-6C
6” Square
500 lbs.
TR-12C
12” Round
1000 lbs.
Lazy Susan Turntable Swivel
• Rev-A-Shelf Full Circle Hardware Set for use with wood or laminate
shelves.
• Set includes: Top and bottom pivots, 3/4” diameter shaft assembly for
24”-31” (610mm-788mm) inside cabinet height, collar assembly, two
polymer full circle shelf supports and mounting screws.
• 1/box. Sold individually.
Product #
6020-04P-52
Lazy Susans/Corner Cabinetry
• Ball bearing turntable.
• Heavy-duty steel; zinc finish.
• May be used for rotating book racks, serving trays, kitchen storage racks,
etc.
• 1/box. Sold individually.
• Ball bearing turntable.
• Aluminum with bumpers.
• Rohs compliant.
• Inner Diameter: 10-1/2”; Height: 1/2”.
• 20/box. Sold individually.
Product #
Size
Load Rating
FT54300
12-3/4”
175 lb.
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
189
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Full Circle Lazy Susans
Full-Circle 2-Shelf Hardware Set
for Polymer Shelves
Full Circle Lazy Susan 2-Shelf Set
6012 Series - Polymer Trays
• Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets.
• 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft),
• Post & pivot hardware accommodates 38”-46” inside cabinet height.
• Set includes: Top and bottom pivots, 3/4” diameter shaft assembly, collar
assembly, and mounting screws.
• 1/box. Sold individually.
Product #
Description
6022-04-52-526
Post & Pivot Hardware
Full-Circle 2-Shelf Hardware Sets - Bulk
for Polymer Shelves
Lazy Susans/Corner Cabinetry
• Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets.
• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Post & pivot hardware accommodates 24”-31” inside cabinet height.
• Use with 6001 Bulk Shelves (sold separately) to make 6 complete 2-shelf
lazy susan sets.
• Bulk Case Contains: 6ea. top & bottom pivots, 6ea. shaft assemblies, 6ea.
collar assemblies, 6 sets mounting screws.
• 6 case/box. Sold per case.
Product #
Description
6022-04-4
Post & Pivot Hardware
Product #
Size
Finish
6012-18-11-52
18”
White
6012-18-15-52
18”
Almond
6012-20-11-52
20”
White
6012-20-15-52
20”
Almond
6012-24-11-52
24”
White
6012-24-15-52
24”
Almond
6012-28-11-52
28”
White
6012-28-15-52
28”
Almond
Full Circle Lazy Susan 2-Shelf Set
6072 Series - Polymer Trays
Lazy Susan Lower Shaft Assembly
• Rev-A-Shelf lazy susan lower shaft only.
• For use with full circle dependently rotating sets.
• 3/4” diameter, bright zinc plated.
• 31” lower shaft assembly for use in 30”-36” wall cabinet applications.
• 36” lower shaft assembly for use in 36”-42” wall cabinet applications.
• 1/box. Sold individually.
190
• 2-Shelf Set with chrome shaft & hardware.
• Dependently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Accommodates 24”-31” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Description
6020-96-3100-2
31” Shaft Only
6020-96-3600-2-52
36” Shaft Only
TEL
509.535.1663 TOLL-FREE
• 2-Shelf Set with chrome hub & hardware.
• Independently rotating shelves, height easily adjusted easily with one
screw.
• Polystyrene material with tough, anti-skid texture surface.
• 1” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size
Finish
6072-32-11-52
32”
White
6072-32-15-52
32”
Almond
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Full Circle Lazy Susan 3-Shelf Set
Full Circle Replacement Shelves
6013 Series - Polymer Trays
6001 Series - Polymer Trays
• Shelves only, hardware sold separately.
• Use as replacements or where extra shelves are needed.
• Polystyrene material with tough, anti-skid texture surface.
• 1/box. Sold individually.
• 3-Shelf Set with chrome shaft & hardware.
• Dependently rotating shelves, height easily adjusted with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft), can be
cut down.
• Accommodates 38”-46” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size
Finish
6013-18-11-526
18”
White
6013-20-11-526
20”
White
Product #
Size
Finish
6001-18-11-52
18”
White
6001-20-11-52
20”
White
6001-20-15-52
20”
Almond
6001-24-11-52
24”
White
6001-28-11-52
28”
White
6001-28-15-52
28”
Almond
Full Circle Lazy Susan 2-Shelf Set
Lazy Daisy - Natural Wood
Full Circle Lazy Susan Sets - Bulk
6012 Series - Polymer Trays
Product #
Size
LD-4NW-072-18-1
18”
Product #
Description
Finish
Qty/Case
LD-4NW-072-28-1
28”
6001-18-11-4
18” Tray Only
White
12
LD-4NW-072-32-1
32”
6001-18-15-4
18” Tray Only
Almond
12
6001-20-11-4
20” Tray Only
White
12
6001-20-15-4
20” Tray Only
Almond
12
6001-28-11-4
28” Tray Only
White
12
6001-28-15-4
28” Tray Only
Almond
12
6022-04-4
Post & Pivot Hardware
Zinc
6
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
Lazy Susans/Corner Cabinetry
• Bulk sets, trays and hardware sold separately.
• Dependently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Post & pivot hardware accommodates 24”-31” inside cabinet height.
• 1 case/box. Sold per case.
• 2-Shelf Set with 3/4” diam. telescoping shaft.
• Furniture grade design with steam bent rim and chrome hubs.
• Independently rotating shelves, height adjusts easily with one screw.
• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.
• Accommodates 26”-31” inside cabinet height.
• 1 set/box. Sold per set.
191
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Full Circle Lazy Susan 2-Shelf Set
Full Circle Lazy Susan 3-Shelf Set
Wood Classic
Wood Classic
• 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower
shaft assembly).
• Independently rotating shelves, height adjusts easily with one screw.
• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size
4WLS072-20-52
20”
Full Circle Lazy Susan 3-Shelf Set
Product #
Size
4WLS073-20-536
20”
Recorner Maxx Round Lazy Susan 2-Shelf Set
Lazy Daisy - Natural Wood
Lazy Susans/Corner Cabinetry
192
• 3-Shelf Set with 1” diam. telescoping shaft (12” upper & 36” lower shaft).
• Independently rotating shelves, height adjusts easily with one screw.
• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.
• Accommodates 38”-46” inside cabinet height.
• 1 set/box. Sold per set.
New Item!
• 3-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 36” lower shaft
assembly).
• Furniture grade design with steam bent rim and chrome hubs.
• Independently rotating shelves, height adjusts easily with one screw.
• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.
• Accommodates 35”-43” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size
LD-4NW-073-1836-1
18”
TEL
509.535.1663 TOLL-FREE
• Features unique construction with no center pole.
• Bases stabilized by a traverse that runs through the cabinet.
• Minimum installation height 24-3/8”.
• EasyFit: tool-free installation of storage units onto the supporting arms.
• Flexible base positioning irrespective of cabinet height.
• Can be installed in lower units, high units and wall units.
• Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size.
• Finish: Maple/Silver.
• Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting
instructions
• 1 set/box. Sold per set.
Product #
Size
A
B
C
9000-4103
18-7/8”
23-5/8”
12-1/4” - 13-3/4”
11-5/8”
9000-4101
26-3/4”
31-1/2”
21-1/4” - 24”
19-7/8”
9000-4099
30”
35-1/2”
21-1/4” - 24”
19-7/8”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Lazy Daisy - Natural Wood
D-Shape Shelf with Swivel Bearing
Lazy Daisy - Natural Wood
• Shelf with aluminum swivel bearing attached.
• 18” tray features a 7” swivel; 24”-32” trays feature a 10” swivel.
• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1/box. Sold individually.
• Shelf with aluminum swivel bearing attached.
• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1/box. Sold individually.
Product #
Size
Product #
Size (D)
A
B
C
LD-4NW-001-18B-1
18”
LD-4NW-201-20BS-1
20”
8-3/8”
9-7/8”
18-1/8”
LD-4NW-001-28B-1
28”
LD-4NW-201-32BS-1
32”
13-1/2”
16-3/4”
29-3/8”
LD-4NW-001-32B-1
32”
KITCHEN ORGANIZERS
D-Shape Lazy Susans
Full Circle Shelf with Swivel Bearing
D-Shape Lazy Susan 2-Shelf Set
7012 Series - Polymer Trays
Full Circle Shelf with Swivel Bearing
Wood Classic
Product #
Size
4WLS001-20-B52
20”
Full Circle 2-Shelf Set with Swivel Bearing
Wood Trays
• 2-Shelf Set with chrome shaft & hardware.
• Dependently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Accommodates 24”-31” inside cabinet height.
• Finish: White.
• 1 set/box. Sold per set.
Product #
Size (D)
A
B
C
7012-20-11-52
20”
8-7/8”
9-1/4”
18-7/8”
D-Shape Lazy Susan 2-Shelf Set
6272 Series - Polymer Trays
• Pre-mounted die-cast aluminum bearing for ultra smooth movement.
• 1-3/4” lip height.
• 450lb weight capacity.
• 12mm multi-directional plywood shelf with 10-ply maple rim.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• Set includes: 2 trays with attached cast bearings.
• 1 set/box. Sold per set.
Product #
Size
T7228K30TRDCBMNL1
28”
T7232K30TRDCBMNL1
32”
TEL
509.535.1663 TOLL-FREE
Lazy Susans/Corner Cabinetry
• Shelf with 7” aluminum swivel bearing attached.
• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1/box. Sold individually.
• 2-Shelf Set with chrome hub & hardware, and self locating stop.
• Independently rotating shelves.
• Height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),
• Accommodates 26”-32” inside cabinet height.
• Finish: White.
• 1 set/box. Sold per set.
Product #
Size (D)
A
B
C
6272-20-11-52
20”
8-7/8”
9-1/4”
19”
800.888.1663
www.spokanehardware.com
193
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Kidney Lazy Susans
Kidney Lazy Susan 2-Shelf Set
Lazy Daisy - Natural Wood
Kidney Lazy Susan 2-Shelf Set
6472 Series - Polymer Trays
• 2-Shelf Set with chrome shaft & hardware.
• Independently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft).
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size (D)
A
B
C
6472-18-11-52
18”
1-3/4”
2-13/16” 11-13/16”
6472-24-11-52
24”
1-1/2”
2-5/16”
6472-28-11-52
28”
3”
4-11/16” 18-5/8”
14-5/16”
• 2-Shelf Set with 1” diam. telescoping shaft.
• Furniture grade design with steam bent rim and chrome hubs.
• Independently rotating shelves, height adjusts easily with one screw.
• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
Product #
Size (D)
A
B
C
Finish
LD-4NW-472-28-1
28”
3”
4-1/4”
18-1/8”
White
LD-4NW-472-32-1
32”
4”
5-3/4”
21-5/8”
White
Kidney Lazy Susan 2-Shelf Set
White
6472-28-15-52
28”
3”
4-11/16” 18-5/8”
Almond
6472-32-11-52
32”
4-1/4”
6-7/16”
22-7/16”
White
6472-32-15-52
32”
4-1/4”
6-7/16”
22-7/16”
Almond
Wood Classic
Kidney Lazy Susan 2-Shelf Sets - Bulk
6472 Series - Polymer Trays
Lazy Susans/Corner Cabinetry
• 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower
shaft assembly).
• Independently rotating shelves, height adjusts easily with one screw.
• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
• 2-Shelf Set with chrome shaft & hardware.
• Independently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft).
• Accommodates 26”-32” inside cabinet height.
• Each Set Contains: 2 - shelves, telescoping shaft, mounting hardwarecomplete with screws.
• Sold by the case only, 5 complete sets/bulk case.
Product #
Size (D)
A
B
C
Finish
6472-28-11-4S
28”
3”
4-11/16”
18-5/8”
White
6472-28-15-4S
28”
3”
4-11/16”
18-5/8”
Almond
Product #
Size (D)
A
B
C
4WLS472-24-52
24”
1-7/16”
2-3/8”
14-3/8”
Kidney Lazy Susan 2-Shelf Set
5472 Series - Premiere Chrome
• 2-Shelf Set with chrome hubs & hardware.
• Independently rotating shelves, height adjusts easily with one screw.
• Heavy-duty chrome wire for contemporary kitchen designs.
• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft),
• Accommodates 26”-32” inside cabinet height.
• 1 set/box. Sold per set.
194
TEL
509.535.1663 TOLL-FREE
Product #
Size (D)
A
B
C
5472-28-CR
28”
3”
4-3/8”
18-7/16”
5472-32-CR
32”
4-1/8”
6”
22-1/16”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Kidney 2-Shelf Set with Swivel Bearing
Wood Trays
New Item!
• Features unique construction with no center pole.
• Bases stabilized by a traverse that runs through the cabinet.
• Minimum installation height 24-3/8”.
• EasyFit: tool-free installation of storage units onto the supporting arms.
• Flexible base positioning irrespective of cabinet height.
• Can be installed in lower units, high units and wall units.
• Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size.
• Finish: Maple/Silver.
• Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting
instructions
• 1 set/box. Sold per set.
• Pre-mounted die-cast aluminum bearing for ultra smooth movement.
• 1-3/4” lip height.
• 450lb weight capacity.
• 12mm multi-directional plywood shelf with 10-ply maple rim.
• Set includes: 2 trays with attached cast bearings.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1 set/box. Sold per set.
Product #
Size
T8228K30TRDCBMNL1
28”
T8332K30TRDCBMNL1
32”
KITCHEN ORGANIZERS
Recorner Maxx Kidney Lazy Susan
2-Shelf Set
Deep Bin Super Susan & Swivel Bearing
Wood Tray
Product #
Size
A
B
C
9000-4102
18-7/8”
23-5/8”
12-1/4” - 13-3/4”
11-5/8”
9000-4100
26-3/4”
31-1/2”
21-1/4” - 24”
19-7/8”
9000-4098
30”
35-1/2”
21-1/4” - 24”
19-7/8”
Kidney Shelf with Swivel Bearing
Lazy Daisy - Natural Wood
Product #
Size (D)
A
B
C
LD-4NW-401-28BS-1
28”
3”
4-1/4”
18-1/8”
LD-4NW-401-32BS-1
32”
4”
5-3/4”
21-5/8”
TEL
509.535.1663 TOLL-FREE
Product #
Diameter
T8530K30TR6DCBMNL1
30”
800.888.1663
www.spokanehardware.com
Lazy Susans/Corner Cabinetry
• Shelf with aluminum 10” swivel bearing attached.
• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1/box. Sold individually.
• 450lb. cast aluminum bearing with detent attached.
• Hard maple and birch construction and 1/2” plywood shelf.
• Solid maple rim front; 6” high lip.
• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.
• 1/box. Sold individually.
195
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Pie-Cut Lazy Susans
Pie-Cut Lazy Susan 2-Shelf Set
Lazy Daisy - Natural Wood
Pie Cut Lazy Susan 2-Shelf Set
6142/6942 Series - Polymer Trays
• 2-Shelf Set with chrome hub & hardware.
• Standard centering hardware, raises 3/8” as unit rotated in & out of
detent.
• Polystyrene material with tough, anti-skid texture surface.
• 6142 Series: 3/4” diam. telescoping center shaft, accommodates 24”-31”
inside cabinet height.
• 6942 Series: 1” diam. telescoping center shaft, accommodates 26”-32”
inside cabinet height. Upper shelf adjustable, lower shelf is in fixed position.
• 1 set/box. Sold per set.
Lazy Susans/Corner Cabinetry
196
Product #
Size (D)
A
B
C
Finish
6142-18-11-52
18”
7/8”
1-1/4”
10-1/4”
White
6142-22-11-52
22”
1-1/8”
1-9/16”
12-9/16”
White
6942-24-11-52
24”
1-3/8”
1-15/16”
13-15/16”
White
6942-24-15-52
24”
1-3/8”
1-15/16”
13-15/16”
Almond
6942-28-11-52
28”
3”
4-1/4”
18-1/4”
White
6942-28-15-52
28”
3”
4-1/4”
18-1/4”
Almond
• 2-Shelf Set with 1” diam. telescoping shaft.
• Furniture grade design with steam bent rim and chrome hubs.
• Dependently rotating shelves, physically attach to the door.
• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.
• Accommodates 26”-32” inside cabinet height.
• Specifications: A = 3” ; B = 4-1/4”; C = 18-1/8”; D = 27-3/4”; Z = 10-7/8” +
1/8”gap.
• 1 set/box. Sold per set.
Product #
Size
LD-4NW-942-28-1
28”
Pie Cut Lazy Susan Sets - Bulk
6901 Series - Polymer Trays
• Bulk sets, trays and hardware sold separately.
• Dependently rotating shelves, height adjusts easily with one screw.
• Polystyrene material with tough, anti-skid texture surface.
• 1” diam. telescoping center shaft system.
• Post & pivot hardware accommodates 26”-32” inside cabinet height.
• Specifications: A = 3” ; B = 4-1/4”; C = 18-1/4”; D = 28”; Z = 10-11/16” +
1/8”gap.
• 1 case/box. Sold per case.
Product #
Description
Finish
Qty/Case
6901-28-11-4
28” Tray Only
White
12
6942-04-28-4
Post & Pivot Hardware
Zinc
6
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Vibo Fly Moon Corner Shelves Only
Pivot & Slide Half Moon 2-Shelf Set
6882 Series - Polymer Trays
New Item!
• An innovative and unique space saving corner unit.
• Shelves can be pulled-out independently.
• Trays designed to increase storage surface - feature 2-3/4’’H shelf rail, and
non slip melamine surface.
• For frame and frameless cabinets.
• Load capacity 44 lbs (20kg) per shelf.
• Minimum door opening 85°.
• Finish: Champagne/maple.
• Tray Height: 3-3/8”.
• Kit contents: 2 pull-out pivoting shelves only. Corner Mechanism
must be ordered separately.
• 1 pr/box. Sold per pair.
Product #
Handing
Min.Opening
Tray Width
QFLY40DXM20MVCH
Right
13-5/8”
29”
QFLY40SXM20MVCH
Left
13-5/8”
29”
QFLY45DXM20MVCH
Right
16”
32-3/16”
QFLY45SXM20MVCH
Left
16”
32-3/16”
QFLY60DXM20MVCH
Right
21”
38-7/16”
QFLY60SXM20MVCH
Left
21”
38-7/16”
New Item!
• Designed for a blind corner cabinet applications.
• 2-Shelf Set with pivot and slide hardware.
• 15-7/8”H shaft assembly.
• Polystyrene trays with tough, anti-skid texture surface.
• For frame and frameless cabinets, non-handed.
• 1 set/box. Sold per set.
• Allows shelves (sold separately) to be pulled-out independently.
• Height adjustable shaft, easy to install.
• Patented mechanism can be easily fixed in on one side of the cabinet.
• For frame and frameless cabinets.
• Minimum door opening 85°.
• Finish: Champagne.
• Height Adjustable: 26”-32” (660-813mm).
• Kit contents: Corner mechanism with height adjustable shaft; assembly
instructions and drilling template, extension pipe.
• Must order Separately: Vibo Fly Moon 2 pull-out pivoting shelf set.
• 1/box. Sold individually.
Product #
Size
Min. Opening
Finish
6882-31-11-570
31”
13-1/4”
White
6882-31-15-570
31”
13-1/4”
Almond
6882-33-11-570
33”
16-1/8”
White
6882-33-15-570
33”
16-1/8”
Almond
6882-39-11-570
39”
19-1/4”
White
Product #
Handing
Min.Opening
6882-39-15-570
39”
19-1/4”
Almond
QFLYAST2DXVCH
Right
13-5/8” or 16”
QFLYAST2SXVCH
Left
13-5/8” or 16”
QFLYAST602DXVCH
Right
21”
QFLYAST602SXVCH
Left
21”
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
Lazy Susans/Corner Cabinetry
Vibo Fly Moon Corner Mechanism Only
KITCHEN ORGANIZERS
Blind Corner Lazy Susans
197
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Half Moon 2-Shelf Tray Set
KitchenMate Blind Corner Caddy
Lazy Daisy - Natural Wood
• Designed for blind corner cabinet applications.
• 2-Shelf Set with pivot and slide hardware.
• Furniture grade design with steam bent rim and chrome hubs.
• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.
• 15-7/8”H shaft assembly.
• For frame and frameless cabinets, non-handed.
• 1 set/box. Sold per set.
Product #
Size
Min. Opening
LD-4NW-882-32-1
32”
12”
LD-4NW-882-35-1
35”
15”
LD-4NW-882-38-1
38”
18”
Pivot & Slide Half-Moon Shelf
The KitchenMate Blind Corner Caddy is designed for those hard-to-reach
areas in a blind corner cabinet. Perfect for bulk storage, occasional-use
items or counter top appliances.
Set Includes:
• Two-shelf drawer kit with 100lb, full-extension, ball-bearing slides, premounted onto sled with vertical side panels (for upper tray).
• Swing-out, all solid wood, pre-finished maple storage bins accessible
from both sides.
• Designed for 15” or larger openings.
• 1 set/box. Sold per set.
Product #
Wire Tray
P0650MNL1
KitchenMate Corner Pantry
Lazy Susans/Corner Cabinetry
• Designed for use in blind corner cabinets.
• Pivot-out shelf features non-handed reversible hinge system.
• Glide-out shelf extends on 21-5/8” heavy-duty ball-bearing slides.
• Nylon door follower attaches susan to door for automatic shelf retrieval.
• 1 set/box. Sold per set.
Product #
Size
Min.Opening
Finish
HM28G-W
28”
14-1/2”
White
The KitchenMate Corner Pantry is a truly unique alternative to the traditional lazy susan. Fabricated from solid maple and plywood construction,
this unit comes fully assembled and pre-mounted with a plywood sled for
easy installation.
• Designed for 33” & 36” corner cabinets.
• Features heavy-duty, 125lb. full extension slides.
• Perfect for remodels, can be easily installed even with existing countertop intact.
• 1 set/box. Sold per set.
198
TEL
509.535.1663 TOLL-FREE
Product #
Size
Height
P0610MNL1
33”
26-1/2”
P0615MNL1
36”
26-1/2”
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Chef’s Double Pantry System
Rev-A-Shelf Blind Corner Optimizer
5PSP CR Series
KITCHEN ORGANIZERS
Pantry Organizers / Blind Corner
New Item!
• Maximizes space in blind corner cabinets while allowing the user full accessibility to the entire unit.
• Features 100lb rated full-extension ball-bearing slides.
• Unit slides completely outside of cabinet for hard to reach items.
• Works in either a blind-left or blind-right corner cabinet.
• Fit most 45”(PSP-15/18) and 48” (PSP-18).
• Finish: Chrome.
• Basket Dimensions 5PSP-15CR: 11-3/4”W x 16-1/2”D x 3-1/2”H.
• Basket Dimensions 5PSP-18CR: 14-3/4”W x 16-1/2”D x 3-1/2”H.
• Set Contents: frame w/4 chrome baskets, full-extension 100lb. slides,
mounting hardware & screws.
• 1/box. Sold individually.
Product #
Width
Depth
Height
Min.Opening
5PSP15-CR
26-1/4”
20-1/4”
21”
15”W
5PSP18-CR
32-1/4”
20-1/4”
21”
17-3/4”W
The Omega National Chef’s Pantry Systems are not only beautiful but
they are heavy duty as well. Manufactured from Baltic Birch, the Omega
National pantry systems are highly versatile and allow for many different
shelving configurations.
• Min. Cabinet opening: 33” wide.
• Clear Coated Birch.
• System Includes: (2) Swing-Out Units: 51 1/2”H x 12 1/4”W x 7 1/4”D;
(2) Door Units: 51 1/2” H x 12 1/4” W x 3 3/4” D ; (24) Shelf Supports; (4)
Non-Mortise Hinges 3 1/2”; (12) Adjustable Shelf Fronts; (6) Door Unit
Adjustable Shelves; (6) Swing-Out Adjustable Shelves; (1) Mounting
Hardware Package.
• Shown with Center Mounting Panel (not included).
• 1 set/box. Sold per set.
Product #
P0251DNL1
5707 Series
Chef’s Upper Door System
New Item!
Maximize space in blind corner cabinets with this Premiere Corner System
that provides easy access to hard-to-reach areas hidden in the back of the
cabinet.
• Two large and two small heavy-gauge chrome plated baskets.
• Exceptionally designed pivot and slide on a “soft-close” slide system.
• Universal door mounting hardware for left or right hand applications and
easy to follow installation instructions.
• Can be utilized in both face frame and frameless cabinets with 15” and
18” openings.
• Finish: Chrome.
• 1/box. Sold individually.
Product #
Width
Height
Depth
Min. Opening
5707-15CR
39” to 48”
21-3/8”
20-1/16”
15”W
5707-18CR
39” to 48”
21-3/8”
20-1/16”
18”W
TEL
509.535.1663 TOLL-FREE
The Omega National Chef’s Pantry Systems are not only beautiful but
they are heavy duty as well. Manufactured from Baltic Birch, the Omega
National pantry systems are highly versatile and allow for many different
shelving configurations.
• Clear Coated Birch.
Pantry Organizers / Blind Corner
Blind Corner Organizer with Soft-Close
• System Includes: (2) Door Units: 18-1/2” H x 12-1/4” W x 3-3/4” D ; (1)
Mounting Hardware Package.
• 1 set/box. Sold per set.
Product #
P0262DNL1
800.888.1663
www.spokanehardware.com
199
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
KV 8000 Undermount Pantry Slides
Glideware Pull-Out Rack with Hooks
Overtravel - 130lb.
New Item!
Designed for use with kitchen pantries, computer and entertainment
centers, or where a pull-out shelf is needed.
• Load capacity: 130lbs.
• Extension: full-extension plus overtravel.
• Mounting: bottom mount.
• Slide Action: Telescoping; ball-bearing.
• Clearance: 3/4” (slide only); 2-1/4” (with brackets).
• Height: 1-35/64”.
• Removable brackets that allow for fast and easy installation.
• Hold-in detent and key-hole style mounting holes.
• Steel; anochrome plated finish.
• 5 pr/box. Sold per pair.
Pantry Organizers / Blind Corner
200
Product #
Size
8000P20
20”
8000P22
22”
8000P24
24”
• Keeps cabinets organized and eliminates clutter.
• Solid, clear maple body and 7 solid metal, custom-made hooks.
• Gliding hardware designed with a 100-pound capacity.
• Weighted hooks and synchronized motion keeps cookware quiet.
• Designed to fit any standard depth cabinet - installation in a full height
cabinet is recommended to hang larger cookware.
• Top of unit to bottom of hooks: 5”.
• Rear mounting bracket (for face frame installation) will add 3/4” to overall
length.
• Lifetime Warranty.
• 1/box. Sold individually.
Product #
Length
Width
Height
Finish
GLDWR7HK
22”
4-1/4”
3”
Clear Maple
Hooks for Glideware
• Solid metal, custom-made, weighted hooks designed to fit the Glideware
Racks.
• 1 pr/box. Sold per pair.
TEL
509.535.1663 TOLL-FREE
Product #
Finish
GLDWR2HK
Satin Nickel
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Door Storage and Spice Racks
Adjustable Door Mount Spice Rack
4ASR Series - Wood Classics
Wood Door Storage Tray
4200 Series - Wood Classics
• Easy to install with screw-in clips (included).
• May also be mounted to 6232 adjustable aluminum standards (sold
separately).
• Includes: Single maple wood tray with chrome rails and screw-in clips.
• 1/box. Sold individually.
Product #
Width
Depth
Height
4231-14-52
13-3/4”
4-1/4”
3-5/8”
Door Storage Shelf Set
6230 Series
• Maple hardwood with a UV-cured clear finish.
• Adjustable shelves offer up to 5” of mounting adjustment.
• Hold spice bottles up to 2-1/4” diam.
• 1/box. Sold individually.
Product #
Width
Depth
Height
Min.Opening
4ASR-15
10-1/8”
4”
25”
11”
4ASR-18
13-1/8”
4”
25”
14”
4ASR-21
16-1/8”
4”
25”
16-3/4”
Door Mount Spice Rack
4SR Series - Wood Classics
Door Storage and Spice Racks
• Easy to install with screw-in clips (included).
• May also be mounted to 6232 adjustable aluminum standards (sold
separately).
• Set includes: 2 polymer shelves with screw-in clips.
• 1 set/box. Sold per set.
Product #
Width
Depth
Height
6232-14-11-52
13-3/4”
4-1/4”
3-9/16”
6232-20-11-52
19-3/4”
4-1/4”
3-9/16”
6232-08-11-52
7-7/8”
4-1/4”
3-9/16”
• Maple hardwood rack with a UV-cured clear finish.
• Easily installs with just four screws.
• 1/box. Sold individually.
Shelf Standards & Clips
Product #
Width
Height
Depth
4SR-15
9-5/8”
21-1/2”
3-1/8”
4SR-18
12-5/8”
21-1/2”
3-1/8”
4SR-21
15-5/8”
21-1/2”
3-1/8”
• For use with Rev-A-Shelf Door Storage trays (sold separately).
• Adjustable clips attach your door storage tray to the standards.
Product #
6231-41-4101-10
6232-58-4528-52
6232-26-4528-52
TEL
Description
Qty/Box
1/box. Sold
Replacment Clips
White
individually.
58” Standards w/10 Clips Aluminum 1 pr/box. Sold
26” Standards w/4 Clips Aluminum per pair.
509.535.1663 Finish
TOLL-FREE
800.888.1663
www.spokanehardware.com
201
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Drawer Organizers
Door Mount Spice Rack
565 Series
Drop-In Drawer Peg System
4DPS Series - Wood Classics
• Endlessly changeable pegboard system creates instant storage for all
kinds of items.
• Can be trimmed to fit and is constructed from UV-Cured maple.
• Includes: 1 peg board and push-in pegs. 4DPS-2421 (9 pegs), 4DPS-3021
(12 pegs) , 4DPS-3921 (16 pegs).
• Top 3 baskets are 2-3/8” deep and the bottom basket is 4-1/8” deep.
• Includes screw down clips for easy mounting.
• Heavy gauge white wire.
• 1/box. Sold individually.
Product #
Width
Height
565-8-52
7-7/8”
21-3/8”
565-10-52
10-5/8”
21-3/8”
565-14-52
13-5/8”
21-3/8”
Product #
Width
Depth
Height
4DPS-2421
24-1/4”
21-1/4”
6-5/8”
4DPS-3021
30-1/4”
21-1/4”
6-5/8”
4DPS-3921
39-1/4”
21-1/4”
6-5/8”
1-1/4”
6”
Qty/Box
1 set/box.
Sold per set.
Additional Pegs
Sink Base Door Storage
4SBSU Series - Wood Classics
4DPS-PEG-4
1-1/4”
4/box. Sold
individually.
Trimmable Cutlery Tray Insert
4WCT Series - Wood Classics
Door Storage and Spice Racks
• Maple hardwood construction with a UV-cured clear finish.
• Features a polymer tray on the top shelf with new adjustable door mount
brackets that provide installation flexibility up to 5”.
• 1/box. Sold individually.
Product #
Width
Height
Depth
Min.Opening
4SBSU-15
10-1/2”
18-1/2”
5”
11-5/8”
4SBSU-18
13-1/2”
18-1/2”
5”
14-3/8”
4SBSU-21
16-1/2”
18-1/2”
5”
17-1/4”
• Height: 2-7/8”.
• Cut to size, drop-in installation.
• Maple hardwood with a UV-cured clear finish.
• 1/box. Sold individually.
202
TEL
509.535.1663 TOLL-FREE
Product #
Overall Size
Min. Trim
4WCT-1
14-5/8”W x 22”D
8-3/4”W x 15-1/2”D
4WCT-3
20-5/8”W x 22”D
14-1/4”W x 15-1/2”D
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Knife Holder/Cutting Board Drawer System
4WUT Series - Wood Classics
4KCB Series - Wood Classics
KITCHEN ORGANIZERS
Trimmable Utility Tray Insert
Combination knife holder/cutting board with full-extension, ball-bearing
slides.
• No drawer box needed, comes as a complete set, all you need is drawer
front.
• Adjustable depth, designed for 24” deep cabinets.
• Features 3 divided sections and 7 slot knife holder.
• Minimum opening height : 4-3/4”.
• 1 set/box. Sold per set.
• Height: 2-7/8”
• Cut to size, drop-in installation.
• Maple hardwood with a UV-cured clear finish.
• 1/box. Sold individually.
Product #
Overall Size
Min.Trim
4WUT-1
18-1/2”W x 22”D
8-1/8”W x 17”D
4WUT-3
24”W x 22”D
12”W x 17-5/8”D
Product #
Width
Depth
Height
4KCB-18
14-1/2”
22-1/4”
5”
4KCB-21
17-1/2”
22-1/4”
5”
4KCB-24
20-1/2”
22-1/4”
5”
Cutlery Tray
Wood Knife Block Insert
4WKB Series - Wood Classics
Drawer Organizers
• Features 19 slots to store knives.
• Birch/maple hardwood coated with a UV-cured clear finish.
• Trimmable for customized drawer sizes.
• 1/box. Sold individually.
Product #
Width
Depth
Height
4WKB-1
18-1/2”
22”
2-3/8”
TEL
509.535.1663 TOLL-FREE
• Height: 2-3/8”.
• Can be custom cut to size with a simple drop-in installation.
• Hi-impact rubberized polystyrene in a high gloss white or silver finish.
• 1/box. Sold individually.
Product #
Overall Size
Min.Trim
Color
GCT-1S-52
11-1/2”W x 21-1/4”D
8-5/8”W x 17-3/4”D
Silver
GCT-1W-52
11-1/2”W x 21-1/4”D
8-5/8”W x 17-3/4”D
White
GCT-2S-52
14-1/4”W x 21-1/4”D
11-5/8”W x 17-3/4”D Silver
GCT-2W-52
14-1/4”W x 21-1/4”D
11-5/8”W x 17-3/4”D White
GCT-3S-52
17-1/2”W x 21-1/4”D
14-3/4”W x 17-3/4”D Silver
GCT-3W-52
17-1/2”W x 21-1/4”D
14-3/4”W x 17-3/4”D White
GCT-4S-52
21-7/8”W x 21-1/4”D
18-3/8”W x 17-3/4”D Silver
GCT-4W-52
21-7/8”W x 21-1/4”D
18-3/8”W x 17-3/4”D White
800.888.1663
www.spokanehardware.com
203
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Rolling Tray System
Trimmable Cutlery Tray Insert
• Roller system rolls smoothly in lower track built into bottom utility tray.
• The top rolling tray requires no trimming and is easily removable.
• 3-1/8”H min. cabinet opening.
• Base tray: 1-5/8”H.
• White high gloss finish, thick gauge polystyrene.
• 1 set/box. Sold per set.
Product #
Overall Size
Min.Trim
RT-10-3H
11-3/4” x 16-3/4”
8-3/4” x 16-3/4”
RT-12-3H
14-1/2” x 16-3/4”
11-3/4” x 16-3/4”
RT-14-3H
17-3/4” x 16-3/4”
14-3/4” x 16-3/4”
RT-18-3H
21-3/4” x 16-3/4”
17-3/4” x 16-3/4”
• Height: 2”.
• Can be trimmed to fit drawer.
• Made of plastic with faux maple finish.
• 1/box. Sold individually.
Product #
Width
Depth
556-53-400
8” - 12”
19-1/4” - 21-1/4”
556-53-401
12” - 16”
19-1/4” - 21-1/4”
556-53-403
16” - 20”
19-1/4” - 21-1/4”
556-53-405
20” - 24”
19-1/4” - 21-1/4”
Spice Drawer Insert
4SDI Series - Wood Classics
Utility Tray
• Height: 1-1/2”.
• This insert can be customized to fit various drawer sizes.
• Birch/Maple hardwood with a UV-cured clear finish.
• 1/box. Sold individually.
Drawer Organizers
Product #
Width
Depth
4SDI-18
16”
19-3/4”
4SDI-24
22”
19-3/4”
Spice Drawer Insert
• Height: 2-3/8”
• Can be custom cut to size with a simple drop-in installation.
• Hi-impact rubberized Polystyrene in a high gloss white finish.
• 1/box. Sold individually.
Product #
Overall Size
Min. Size
Color
GUT-10W-52
11-1/2”W x 21-1/4”D
8-1/4”W x 17-3/4”D
White
GUT-12W-52
14-1/2”W x 21-1/4”D
11-5/8”W x 17-3/4”D
White
GUT-15W-52
17-1/2”W x 21-1/4”D
14-3/4”W x 17-3/4”D
White
GUT-18W-52
21-7/8”W x 21-1/4”D
18-3/8”W x 17-3/4”D
White
• Height: 2-3/8”.
• Designed to hold spice containers securely while keeping them easily
accessible.
• Can be custom cut to size with a simple drop-in installation.
• Hi-impact rubberized polystyrene in a high gloss white.
• 1/box. Sold individually.
204
TEL
509.535.1663 TOLL-FREE
Product #
Size
Min.Trim
ST-2GW-52
16”W x 21-1/4”D
11-3/8”W x 15-1/2”D
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Sink Front Tip-out Tray Set
6540 Slim Series
• Designed to be easily trimmed to length for custom applications.
• Set includes: (1) - 36” extruded tray, 2 pair of hinges, 2 pair of end caps,
and adhesive.
• 1 set/box. Sold per set.
• Designed to hold spice containers securely.
• Trimmable to fit any size.
• Polymer, textured finish.
• 1/box. Sold individually.
Product #
Size
Finish
ST50-21A-52
50”W x 21”D
Almond
ST50-21W-52
50”W x 21”D
White
Maple
Height
Color
2-1/2”
White
6541-36-15-52
36”
1-11/16”
2-1/2”
Almond
• Designed to be easily trimmed to length for custom applications.
• 36” tray only, hinges & end caps sold separately.
• 20/box. Sold individually.
Depth
Height
Color
6541-36-11-4 36”
Product #
Length
1-11/16”
2-1/2”
White
6541-36-15-4 36”
1-11/16”
2-1/2”
Almond
Tip-Out Tray Hinges & End Caps
6540 Slim Series
Vanity Drawer Organizer
Sink Front Tip Out Trays
C0480MNL1
Depth
1-11/16”
6540 Slim Series
• Design segments for any size storage or any size deep drawer. • Features 3 pre-finished 11” x 24” maple hardwood dividers and 6 predrilled mounting rails. • Easily trimmed for various drawer depths.
• 1 set/box. Sold per set.
Finish
Length
36”
Sink Front Tip-out Tray Only
Tra-Sta Deep Drawer Divider Kit
Product #
Product #
6541-36-11-52
KITCHEN ORGANIZERS
Sink Front Tip Out Trays
Spice Drawer Insert
• Set includes: (1) pair Hinges, 1 pair end caps, and adhesive
• Tip-out trays sold separately.
• 40 pr/box. Sold per pair.
• Top Rolling Tray: 5-7/8” W x 12-13/16” D x 1-1/2”H.
• Base tray : 1-7/8” deep.
• Requires 3-3/8”H minimum clearance.
• While polymer.
• 1 set/box. Sold per set.
Product #
Size
Min.Trim
COSK-18
14-3/4”W x 21-7/8”D
12-5/8” x 16-1/2”D
TEL
509.535.1663 TOLL-FREE
Product #
Finish
6542-97-11-4
White
6542-97-15-4
Almond
800.888.1663
www.spokanehardware.com
205
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Sink Front Tip-out Tray Set
Tip-Out Tray Hinges & End Caps
6551 Series
6571 Series
• Set includes: 1 pair hinges, 1 pair end caps, and adhesive
• 6571 Series tip-out tray sold separately.
• 40 pr/box. Sold per pair.
• Extruded polymer tip-out/spice tray can be trimmed to the desired
length.
• Set includes: 1 tray, 2 pair hinges, 2 pair end caps, and adhesive.
• 1 set/box. Sold per set.
Product #
Length
Depth
Height
Color
6551-36-11-52
36”
2-7/16”
3-15/16”
White
6551-36-15-52
36”
2-7/16”
3-15/16”
Almond
Product #
Finish
6552-97-11-4
White
End Cap Adhesive
Sink Front Tip-out Tray Only
6571 Series
• Adhesive for attaching end caps on 6541 and 6571 Series Tip-Out Trays.
• 3 gram tube.
• 1/box. Sold individually.
Product #
6571-60-52
Tip-Out Tray with Tab Stops
• Tray designed to be easily trimmed to length for custom applications.
• Includes: 1 extruded tray only (hinges, end caps, and adhesive sold
separately).
• 20/box. Sold individually.
Product #
Length
Depth
Height
6561 Series
Color
Sink Front Tip Out Trays
6571-36-11-4 36”
2-7/16”
3-15/16”
White
6571-72-11-4 72”
2-7/16”
3-15/16”
White
Tip-Out Tray End Caps
6571 Series
• Installs easily with standard cabinet hinges.
• NOTE: Tabs on each side adds an additional 1-1/2” to width.
• Tray only, hinges not included.
• 1/box. Sold individually.
Product #
Tray Width
6561-11-11-4 11”
• Includes: 1 pair of end caps and screws for one standard 6571 Series tipout trays (sold separately).
• Molded white polymer.
• 40 pr/box. Sold per pair.
206
Product #
Height
ST-97-11-4
3-15/16”
TEL
509.535.1663 TOLL-FREE
Depth
Height
Color
2-1/8”
3-13/16”
White
6561-11-15-4 11”
2-1/8”
3-13/16”
Almond
6561-14-11-4 14”
2-1/8”
3-13/16”
White
6561-14-15-4 14”
2-1/8”
3-13/16”
Almond
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Stainless Steel Tip-Out Tray
6572 Series - Polymer
6581 Series
• Sleek molded design, high-impact polystyrene.
• Set includes: (1) standard tray, (1) accessory tray with a ring holder &
soap dish and 2 pair of the Self-Holdin® hinges.
• 1 set/box. Sold per set.
Product #
Width
KITCHEN ORGANIZERS
Tip-Out Tray System
Depth
Height
Color
6572-11-11-52
11”
2-1/8”
3-13/16”
White
6572-11-15-52
11”
2-1/8”
3-13/16”
Almond
6572-11-17-52
11”
2-1/8”
3-13/16”
Silver/metallic
6572-14-11-52
14”
2-1/8”
3-13/16”
White
6572-14-15-52
14”
2-1/8”
3-13/16”
Almond
6572-14-17-52
14”
2-1/8”
3-13/16”
Silver/metallic
Tip-Out Tray
6581 Series - Polymer
• Sleek design with smooth, folded over edges and protective coating.
• Does not come with built-in tab stops.
• Tray only, hinges not included.
• 20/box. Sold individually.
Product #
Width
Depth
Height
6581-11-5
11-1/4”
2-1/8”
3”
6581-14-5
14-1/4”
2-1/8”
3”
6581-16-5
16”
2-1/8”
3”
6581-19-5
19”
2-1/8”
3”
6581-25-5
25”
2-1/8”
3”
6581-28-5
28”
2-1/8”
3”
Tip-Out Tray Hinges
6552 Series
Product #
Width
Depth
Height
Color
6581-11-11-4 11”
2-1/8”
3-13/16”
White
6581-11-15-4 11”
2-1/8”
3-13/16”
Almond
6581-14-11-4 14”
2-1/8”
3-13/16”
White
6581-14-15-4 14”
2-1/8”
3-13/16”
Almond
TEL
509.535.1663 TOLL-FREE
• Self-Holdin® hinges mount easily to all construction types and are totally
concealed.
• Feature a self-closing and tip-open function.
• Less than 2mm of clearance is needed for the countertop and no clearance is required below the false front.
• Projection: 1/2”.
• 40 pr/box. Sold per pair.
Product #
Width
Depth
Height
6552-95-0220-4
1”
1-3/4”
3-13/16”
800.888.1663
www.spokanehardware.com
Sink Front Tip Out Trays
• Sleek molded design, high-impact polystyrene.
• Tray only, hinges not included.
• 40/box. Sold individually.
207
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Soft-Close Tip-Out Hinges
Tip-Out Tray Euro Hinges
• Unique soft-close piston eliminates slamming.
• 50 degree opening allows for complete accessibility to items stored
within.
• Hinges close firmly and stay closed.
• Projection: 1”.
• 1 pr/box. Sold per pair.
• Allows for opening angle from 45º-90º.
• Perfect for use with sink front trays as well as with bread boards. • Fits both frame and frameless cabinetry.
• 10 pr/box. Sold per pair.
Product #
Width
LD-0220-50SC-40 1”
Depth
Height
2-1/2”
3-7/8”
Product #
Height
Depth
Width
ET-H-N
2-7/8”
2-1/4”
3-3/4”
False Front Block
Tip-Out Tray Hinges
ETH Series
• Allows false front panels to be easily installed and removed with a simple
twist.
• For use with 3/4” face frames and a drawer opening height of 4-1/2”.
• Install with single 1” long flat head screw in center hole.
• Overall size: 5-1/2”L x 3/4”W x 1”H.
• White plastic.
• 100/box. Sold individually.
Product #
Sink Front Tip Out Trays
4300-32
False Front Clip
• Designed for long sink front or cooktop false panels
• Features an adjustable opening of 45 to 90 degrees.
• Chrome plated, easy installation.
• 10 pr/box. Sold per pair.
Product #
6552-ETH-10
• Designed with staggered jaws to grip uneven wood sections.
• Permits false front panel above sink doors to be easily snapped into place.
• For 3/4” material. Install using staples or glue.
• 100/box. Sold individually.
Tip-Out Tray Scissor Hinges
Product #
Finish
1931-32
Clear
False Front Clip
• Scissor Hinges are spring-loaded and self-closing with internal stop.
• For use with face-frame or frameless (Euro-style) cabinetry.
• 10 pr/box. Sold per pair.
208
Product #
Width
Depth
Height
SH-10
2-7/8”
1-7/8”
3-13/16”
TEL
509.535.1663 TOLL-FREE
• Permits false front panel above sink doors to be easily snapped into place.
• For use with 3/4” thick face frame material.
• Screws sold separately.
• 100/box. Sold individually.
Product #
Finish
1987-32
White
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Tra-Sta Tray Organizer
Tray Divider with Clips
• Four prefinished maple veneer dividers slide in grooved and predrilled
top and bottom rails.
• Easily trimmable to fit any size cabinet.
• Set includes: 4 finished dividers and 8 drilled rails. Use #4 1/2” flat head
screws, NOT INCLUDED.
• 1 set/box. Sold per set.
• Available in 2 sizes: 12” for wall cabinets and 18” for base cabinets.
• Each divider includes 4 screw-in polymer clips and fasteners.
• 10/box. Sold individually.
Product #
Height
Depth
Finish
597-12-10
12”
20”
White
597-18-10
18”
20”
White
597-12CR
12”
20”
Chrome
597-18CR
18”
20”
Chrome
Product #
Length
Width
TS2424
24”
24”
KITCHEN ORGANIZERS
Tray Dividers
Tray Divider Rollout
Tray Dividers with Clips
• Installs easily with four attachment clips.
• Heavy gauge 1/4” white steel wire.
• Finish: White.
• 1/box. Sold individually.
Product #
Width
# of Dividers
Height
Depth
T3194MNL1
5”
1
TD12-W
12”
19-1/2”
T3195MNL1
8”
2
TD18-W
18”
19-1/2”
T3196MNL1
11”
3
Product #
Tray Dividers
• All wood construction, clear-coated maple finish, and removable partitions.
• 100lb, full extension ball-bearing slides.
• Pre-assembled, designed for 9”, 12” and 15” base cabinets.
• 10”H x 21-3/4”D
• 1/box. Sold individually.
U-Shaped Tray Dividers
New Item!
• The sturdy construction and beautiful chrome finish provide durability
and style.
• Easy four-screw installation.
• 1/box. Sold individually.
Product #
Width
Height
Depth
596-10CR-52
3”
10”
11-7/8”
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
209
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Wine, Stemware and Plate Racks
Russian River Wine Rack
Plate Display Rack
• The “X” rack folds down on itself and is height adjustable.
• Designed for 18” & 24” cabinets.
• 10-3/4” depth is trimmable for custom sizes.
• Manufactured from 3/4” x 7/16” solid hardwood mouldings.
• 1/box. Sold individually.
• 36”L x 13-1/16”H x 1-1/2”W.
• Fully assembled unit, boxed two pieces per carton (front and back).
• Center 3 dowels are removable for easy cleaning of the cabinet.
• 3/8” diameter dowels are spaced 2” on center.
• Mouldings have trim area of 1-1/2” on each end.
• 1 pr/box. Sold per pair.
Product #
Species
NPD-36-CH
Cherry
NPD-36-HI
Hickory
NPD-36-MA
Maple
NPD-36-RO
Red Oak
Product #
Species
Size
WS100QUF1
Alder
22-3/8” legs
WS100MUF1
Maple
22-3/8” legs
WS110QUF1
Alder
30-7/8” legs
WS110CUF1
Cherry
30-7/8” legs
WS110MUF1
Maple
30-7/8” legs
Wine Bottle Rack
WineLogic Wine Rack
Wine, Stemware and Plate Racks
210
SPECIAL ORDER
• 16-1/4”W x 22-1/4”D - Minimum cabinet opening: 15” wide.
• Fits into standard base cabinet.
• Full extension, ball-bearing slides allow each tray to glide smoothly in
and out of the rack.
• The bottom tray has a sturdy, 75 lb capacity, while the top trays max out
at 100 lbs each.
• Horizontal design keeps corks remain moist and swelled.
• Clear coated maple construction.
• Made in the USA.
• Available in 20-20 Design Software for interior designers.
• 1/box. Sold individually.
Product #
Capacity
Height
WLMAPLE12
12 Bottle
7-3/8”
WLMAPLE18
18 Bottle
11”
WLMAPLE24
25 Bottle
14-5/8”
WLMAPLE30
30 Bottle
18-1/4”
TEL
509.535.1663 TOLL-FREE
• 48”L x 2”H.
• Solid wood, sanded and ready to finish.
• Holds eleven wine bottles and is easily trimmed for installation.
• Boxed two pieces per carton (front and back).
• 1 pr/box. Sold per pair.
Product #
Species
S9200CUF1
Cherry
S9200HUF1
Hickory
S9200MUF1
Maple
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
Stemware Rack
• Panels are 3/4” thick x 7/16” wide with radius edges.
• Bottle openings are 4” x 4”.
• Easily cut to desired size.
• Boxed two pieces per carton (front and back).
• 1 pr/box. Sold per pair.
• 8mm heavy-gauge wire construction with a hidden mounting plate.
• Inner width: 3-1/2”.
• 1/box. Sold individually.
Product #
Depth
Width
Height
Finish
Product #
Species
Width
Height
3150-11CR
11”
4-1/4”
1-1/2”
Chrome
WRL1736AL
Alder
17”
36”
3150-11ORB
11”
4-1/4”
1-1/2”
Oil Rubbed Bronze
WRL1736CH
Cherry
17”
36”
3150-11SN
11”
4-1/4”
1-1/2”
Satin Nickel
WRL1736HI
Hickory
17”
36”
3150-16CR
16”
4-1/4”
1-1/2”
Chrome
WRL1736MA
Maple
17”
36”
3150-16ORB
16”
4-1/4”
1-1/2”
Oil Rubbed Bronze
36”
3150-16SN
16”
4-1/4”
1-1/2”
Satin Nickel
24”
3150-18CR
18”
4-1/4”
1-1/2”
Chrome
18”
4-1/4”
1-1/2”
Satin Nickel
WRL1736RO
WRL2430AL
Red Oak
Alder
17”
30”
WRL2430CH
Cherry
30”
24”
3150-18SN
WRL2430HI
Hickory
30”
24”
WRL2430MA
Maple
30”
24”
Quad Stemware Rack
WRL2430RO
Red Oak
30”
24”
WRL2443AL
Alder
24”
43”
WRL2443CH
Cherry
24”
43”
WRL2443HI
Hickory
24”
43”
WRL2443MA
Maple
24”
43”
WRL2443RO
Red Oak
24”
43”
• 8mm heavy-gauge wire construction with a hidden mounting plate.
• Inner width: 3-1/2”.
• 1/box. Sold individually.
• 36”L x 12”W.
• Solid wood, fully sanded and ready for finishing process.
• Features 8 rows of storage and accommodates most stemware styles.
• 1/box. Sold individually.
Product #
Species
S9630OUF1
Red Oak
S9630MUF1
Maple
S9630QUF1
Alder
S9630CUF1
Cherry
S9630HUF1
Hickory
Product #
Width
Depth
Height
Finish
3450-11CR
17”
11”
1-1/2”
Chrome
3450-11ORB
17”
11”
1-1/2”
Oil Rubbed Bronze
3450-11SN
17”
11”
1-1/2”
Satin Nickel
Double Bottle Rack
Wine, Stemware and Plate Racks
Stemware Rack
KITCHEN ORGANIZERS
Wine Bottle Lattice Panel
• 8mm heavy-gauge wire construction with a hidden mounting plate.
• Inner width: 3-5/8”.
• 1/box. Sold individually.
TEL
509.535.1663 TOLL-FREE
Product #
Width
Height
Finish
3250CR
4-1/4”
9”
Chrome
3250ORB
4-1/4”
9”
Oil Rubbed Bronze
3250SN
4-1/4”
9”
Satin Nickel
800.888.1663
www.spokanehardware.com
211
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Appliance Garages, Wood Tambour and
Track Systems
Tambour with Track System
Corner Appliance Garage
• Includes: Tambour Door & Face Frame Style Spring Tension Track System.
• 15” or 24” door width x 18” door & track height; 3/4” slats.
• Track system consists of two PVC guide rails, wood dowel, donut(s), and
tension spring.
• Dowels & tambour can be trimmed for narrower widths.
• Track system easily stapled to back of face frame.
• 1/box. Sold individually.
• Overall Size: 17”W x 18-1/2”H x 11-7/8”D
• Appliance garage for 24” corners.
• Solid wood door mounted to solid wood face frame.
• End panels MDF, plain-sliced veneer faced.
• Spring Tension Track System features smooth, non-binding operation.
• Prefabricated for simple installation.
• 1/box. Sold individually.
Product #
AG-100CSAL
AG-100CSH
AG-100CSM
AG-100CSR
Appliance Garages, Wood Tambour and Track Systems
212
Product #
Species
Width
Height
C02-SCH-1
Cherry
15”
18”
C02-SHI-1
Hickory
15”
18”
Species
C02-SMA-1
Maple
15”
18”
Alder
C02-SRO-1
Red Oak
15”
18”
Hickory
C02-SCH-2
Cherry
24”
18”
Maple
C02-SHI-2
Hickory
24”
18”
Red Oak
C02-SMA-2
Maple
24”
18”
Euro Corner Appliance Garage
Spring Tension Track System Only
• Overall Size: 17”W x 18-1/2”H x 11-7/8”D.
• Modified solid-look painted tambour door on miter-folded face frame
with vinyl laminated end panels.
• Spring Tension Track System (ST-2) with smooth, non-binding operation.
• Prefabricated for simple installation.
• 1/box. Sold individually.
• Face Frame Style Spring Tension Track System, easily stapled to back of
face frame.
• Controls doors up to 36” W x 19” H x .220” thick.
• Can be trimmed for narrower widths.
• Approximate cabinet opening height: 16 1/2” (guiderail height: 17 1/2”)
• Includes: two PVC guide rails, wood dowel, donuts, and tension spring.
• NOTE: This product is white, pictured in almond.
• 1/box. Sold individually.
Product #
Finish
AG-200CW
White
TEL
509.535.1663 TOLL-FREE
Product #
Finish
ST-2-36-WH
White
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
KITCHEN ORGANIZERS
Solid Wood Flat Tambour
Solid Wood Flat Tambour
w/Beveled Edge
w/Radius Edge
• 47” Slat length x 24”H or 36” H.
• 3/16” H x 3/4” W slats.
• Individual solid hardwood slat mouldings bonded to a cloth backer.
• Cleaned, pre-flexed, sanded and ready to finish.
• Includes: 1-1/2”W lead rail; 36” wide doors also include 1-1/2”W trail
slat.
• 1 roll/box. Sold per roll.
• 16”, 24”, 36” or 48” Slat lengths.
• NOTE: Sold in 2ft. wide increments, will come as one continuous roll (up
to 8 feet).
• 1/4” H x 3/4” W slats.
• Individual solid hardwood slat moldings bonded to a strong polypropylene fabric backing.
• Sanded and ready to finish.
• 1 roll/box. Sold per roll.
Species
Height
Slat Length
Alder
24”
47”
SW-30-CH503
Cherry
24”
47”
SW-30-HI502
Hickory
24”
47”
Product #
Species
Slat Length
SW-30-MA512
Maple
24”
47”
CT16FR
Cherry
16”
SW-30-RO511
Red Oak
24”
47”
CT24FR
Cherry
24”
SW-30-AL503
Alder
36”
47”
CT36FR
Cherry
36”
SW-30-HI506
Hickory
36”
47”
CT48FR
Cherry
48”
SW-30-CH514
Cherry
36”
47”
MT16FR
Maple
16”
47”
MT24FR
Maple
24”
47”
MT36FR
Maple
36”
MT48FR
Maple
48”
OT16FR
Oak
16”
OT24FR
Oak
24”
OT36FR
Oak
36”
OT48FR
Oak
48”
SW-30-MA508
SW-30-RO513
Maple
Red Oak
36”
36”
Tambour Track System
for 3/16” Tambour
Tambour Track System
for 1/4” Tambour
• Accommodates almost any 3/16” thick tambour, thicker tambours must
be tenoned.
• Designed for flush mounting in vertical or horizontal applications.
• Can be fastened with 3/8” staples or pan head type screws (not included).
• Made of brown PVC.
• 1/box. Sold individually.
Product #
Description
T96-BROWN
96”L Track
C51-BR
Track Corner
TEL
509.535.1663 TOLL-FREE
• Accommodates almost any 1/4” thick tambour, thicker tambours must
be tenoned.
• Designed for flush mounting in vertical or horizontal applications.
• Can be fastened with 3/8” staples or pan head type screws (not included).
• Made of brown PVC.
• 1/box. Sold individually.
Product #
Description
4T54
48”L Track
4C55
Track Corner
800.888.1663
www.spokanehardware.com
Appliance Garages, Wood Tambour and Track Systems
Product #
SW-30-AL504
213
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Wood Breadboards, Cutting Boards and
Accessories
Miscellaneous Organizers
Heavy Duty Mixer/Appliance Lift
Breadboard/Cutting Board
• Solid hardwood construction with an alder body.
• Electronically laminated and sealed to resist moisture penetration.
• Finger pull on each end allows board to be reversible, alder/oak.
• Features 3/4” thick board and trimmable width for a custom fit.
• 1/box. Sold individually.
Product #
Width
Depth
BB1622K
16”
22”
BB1822K
18”
22”
BB2422K
24”
22”
Breadboard Slides
Wood Breadboards, Cutting Boards and Accessories
214
• 13/16” channel to accommodates a 3/4” thick board.
• Rear bracket can be bent 90° for face frame mounting.
• Steel, Zinc plated.
• 25 pr/box. Sold per pair.
Product #
Length
1212112
22-1/2”
Knife Holder/Cutting Board Drawer System
4KCB Series - Wood Classics
• Combination knife holder/cutting board with full-extension, ball-bearing
slides.
• No drawer box needed, all you need is drawer front.
• Adjustable depth, designed for 24” deep cabinets.
• Features 3 divided sections and 7 slot knife holder.
• Minimum opening height : 4-3/4”.
• 1/box. Sold individually.
Product #
Width
Depth
Height
4KCB-18
14-1/2”
22-1/4”
5”
4KCB-21
17-1/2”
22-1/4”
5”
4KCB-24
20-1/2”
22-1/4”
5”
TEL
509.535.1663 TOLL-FREE
• Features built-in shock dampers and 3 variable spring settings.
• NEW! RAS-ML-HDSC: Soft-Close Damper allow it to glide back into the
cabinet gently and quietly.
• Holds appliances up to 60 lbs.
• Installation in full-height base cabinet only.
• Shelf not included.
• 1 set/box. Sold per set.
Product #
Description
Finish
RAS-ML-HDCR
Heavy Duty Mixer Lift
Silver
ML-HDSC
Heavy Duty Mixer Lift w/Soft-Close
Silver
800.888.1663
www.spokanehardware.com
To Order – Call 509.535.1663 or 800.888.1663
3-Prong Pull-Out Towel Bar
• Features three bars that pull out together on a friction-free ball bearing
carrier.
• Left or right hand mount.
• Polished chrome finish.
• 10/box. Sold individually.
Product #
Length
Width
Height
P793ANO
17-3/4”
4-13/16”
1-5/16”
KITCHEN ORGANIZERS
Mixer/Appliance Lift
2 Prong Pull-Out Towel Bar
• Swings out of the base cabinet and into its final position flush with the
work surface and securely locked in position by a safety device.
• For unlocking and swinging-procedure, safety trigger has to be released
with both hands.
• Tension spring provides for easy operation.
Specifications:
• Min. inside cabinet width: 10-7/8” to 22-7/8”.
• Double spring mechanism for heavier loads and counter balanced lifting
capacity of 16 lbs. in motion, 25lbs. locked in final resting position.
• 1 set/box. Sold per set.
Product #
Finish
498-112-80-4151
White
Product #
Depth
Width
Height
563-51-C
12-7/8”
3-7/8”
1-1/4”
Door Mount Towel Holder
• 3 prongs and 12” extension for accessibility.
• Mounting is universal for horizontal or vertical installation.
• Reversible for non-handed operation.
• Includes 1 pull-out towel bar and mounting screws.
• 1/box. Sold individually.
• Durable 3 tier white epoxy coated rack.
• Installs easily with two screws.
• White finish.
• 10/box. Sold individually.
Product #
Finish
Width
Depth
Height
Product #
Width
Depth
Height
563-47
White
5”
17-3/4”
1-1/4”
563-47C
Chrome
5”
17-3/4”
1-1/4”
TB-W
12-7/16”
3-3/8”
5-1/2”
TEL
509.535.1663 Miscellaneous Organizers
3 Prong Pull-Out Towel Bar
• 2 prongs and ball bearing extension for accessibility.
• Reversible for non-handed operation.
• Includes 1 pull-out towel bar and mounting screws.
• Polished Chrome finish.
• 1/box. Sold individually.
TOLL-FREE
800.888.1663
www.spokanehardware.com
215
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERS
Notes
Undersink Drip Tray
SBDT Series
• Minimum trim size: 25-1/2”W x 21-1/2”D.
• Designed for installation in new 30” sink base cabinet construction (can
be cut down).
• Resistant to most household chemicals.
• Wipes clean with ease.
• 1/box. Sold individually.
Product #
Finish
Width
Depth
Height
SBDT-2730-S-1
Silver
28-1/2”
23-1/4”
3/4”
SBDT-3942-S-1
Silver
40-1/2”
23-1/4”
3/4”
Undersink Vanity Drip Tray
SBVDT Series
Miscellaneous Organizers
• Minimum trim size: 19-1/2”W x 18-1/2”D.
• Designed for installation in new 24” vanity sink base cabinet construction
(can be cut down).
• Resistant to most household chemicals.
• Wipes clean with ease.
• 1/box. Sold individually.
Product #
Finish
Width
Depth
Height
SBVDT-2124-S-1
Silver
22-1/2”
20-1/4”
3/4”
SBVDT-2730-S-1
Silver
28-1/2”
20-1/4”
3/4”
SBVDT-3336-S-1
Silver
34-1/2”
20-1/4”
3/4”
Cabinet Ventilating Louver
• Cabinet ventilating louver for apron above sink door.
• Includes mounting screws and template.
• Opening Size: 9”W x 2-1/2”H.
• 10/box. Sold individually.
216
Product #
Finish
12-26STN
Polished Chrome 10-7/16”
TEL
509.535.1663 Length
Height
2-7/8”
TOLL-FREE
800.888.1663
www.spokanehardware.com