Voi-Shan Hi-Lok Fasteners

Transcription

South Bay Operations
Hi-Lok®/Hi-Tigue®
automatic torque l
uniform preload l
rapid installation
pactness of the Hi-Lok tooling is in a class by itself
when installation means reaching into hidden areas
and next-to-impossible places. In fact, Hi-Lok is
often the only one utilizing high-speed driving
equipment that is approved and qualified for use in
many difficult access conditions. An extensive
range of installation tools satisfies standard, offHi-Lok is a simple 2-part fastener engineered set and extended offset, 20°, 90° and 180º
requirements.
to achieve in one all-purpose system the design
features suiting many of today's aerospace assembly
The Hi-Lok design does more with less,
needs. Consistent torque on each fastener installed
solving
weighty
problems and delivering high fatigue
is achieved through the integrated functions of the
resistance
without
sacrificing strength. The lightsystem working together. A carefully regulated
weight
Hi-Lok
collar
further contributes to weight
breakoff groove in the self-locking Hi-Lok collar
saving
when
compared
to conventional nut and
provides uniform preload values by separating when
bolt
systems
of
equal
strength
chararacteristics.
the correct torque level is reached. This controlled
Manufactured
in
a
wide
range
of
sizes and material
preload of each Hi-Lok in the structure improves
combinations,
in
terms
of
versatility
the Hi-Lok
the fatigue life of the airframe significantly when
system
offers
engineering
designers
a ready solution
compared to other fastening systems, including
to
a
variety
of
assembly
problems.
swaged collar type. The Hi-Lok pin is held stationary
by the installation tool while the collar rotates.
Hi- Lok cannot be over-torqued; the collar’s
Progressive tightening takes place as torque is
automatic
breakoff design assures this - and, in
applied. At the designed torque level built into the
addition,
eliminates
the need for torque inspeciton.
Hi-Lok collar, the hex portion of the collar is sheared
As
a
highly
efficient
and dependable system, it is
off automatically by the driving tool.
another
Voi-Shan
pacesetter,
one that is satisfying
As a versatile fastener, Hi-Lok matches the
aerospace
and
commercial
needs
worldwide.
best qualities of a bolt/nut or pin swaged collar
combination. Tooling is easily adaptable to large
scale production with high speed equipment and
automatic collar feed attachments that handle up to
200 collars, affording installation rates of up to
45 fasteners per minute in some cases. The com
c COPYRIGHT FAIRCHILD AEROSPACE FASTENER DIVISION 1993
Hi-LokR/Hi-TiqueR are registered trademarks of Hi-Shear
Corporation.
An exceptional feature of this fastening system is its ease of installation. First, the pin is inserted into the prepared hole,
the collar is threaded on to the pin and then driven by the installation tooling.
1
The installation of the Hi-Lok fastener is completed on
one side of the assembly after the pin has been
inserted through the hole from the other side.
3
Progessive tightening takes place as torque is applied.
2
4
For non-interference fit applications, the hex
wrench tip of the power driver is inserted
into the hex recess of the pin. This keeps the
pin from rotating as the collar is driven.
At the designed torque level, built into the
Hi-Lok collar, the hex portion of the collar
is sheared off automatically by the driving
tool. Removal of the installation tool from
the Hi-Lok pin completes the installation.
HOLE PREPARATION
Hole preparation should conform with NAS 618 or individual company specifications. A close tolerance hole
is always desirable and it is recommended that the maximum interference fit should be compatible with the
material being joined. This will avoid excessive internal stresses in the structure adjacent to the hole.
AEROSPACE TOOLS provides airframe
manufacturers with a wide range of tools
for installation of the unique products
Fairchild produces. These range from
gages to hand installation and removal
tools, power installation and removal
tools, to automatic systems used on
DRIVMATICR type equipment.
The designs consider all aspects of
manufacturing restrictions such as
accessibility and operator convenience.
HEAD SYLE
GRIP DIAMETER
& VARIATION
STRENGTH
LE V E L
STANDARD DIAMETER
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING, SHEAR
108 KSI MIN SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING, SHEAR
108 KSI MIN SHEAR
3/32 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
1/64 OVERSIZE DIAMETER
PROTRUDING, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
PROTRUDING, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
PROTRUDING, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
PROTRUDING, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING,TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
STANDARD DIAMETER
160-180 KSI TENSILE
PROTRUDING,TENSION
3/32 GRIP VARIATION
STANDARD DIAMETER
160-200 KSI TENSILE
PROTRUDING,TENSION
1/16 GRIP VARIATION
PROTRUDING,TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
PROTRUDING,TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
108 KSI MIN SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
108 KSI MIN SHEAR
3/32 GRIP VARIATION
FLUSH, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
FLUSH, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
FLUSH, SHEAR
95 KSI SHEAR
3/32 GRIP VARIATION
FLUSH, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, TENSION
160-200 KSI TENSILE
1/16 GRIP VARIATION
FLUSH, TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
FLUSH, TENSION
160-180 KSI TENSILE
1/16 GRIP VARIATION
PROTRUDING, SHEAR
NOTES:
1.
2.
FINISH
CADMIUM PLATE PER QQ-P-416
(SEE NOTE #1)
CADMIUM PLATE PER QQ-P-416,
TYPE II; CLASS 3
TYPE II; CLASS 3,COLOR BRONZE
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
(SEE NOTE #2)
TYPE II; CLASS 3
(SEE NOTE #2)
TYPE II; CLASS 3
(SEE NOTE #1)
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
TYPE II; CLASS 3
(SEE NOTE #2)
TYPE II; CLASS 3
(SEE NOTE #2)
TYPE II; CLASS 3
PARTS MAY BE ORDERED WITH TYPE I, CLASS 3 OR TYPE II, CLASS 3, COLOR BRONZE OR
TYPE II, CLASS 3, BLACK FINISH
PARTS MAY BE ORDERED WITH TYPE I, CLASS 3, OR TYPE II, CLASS 3.
PART
NUMBER
COLLAR
CODE
HL 18
1
2
HL 718
1
2
HL 50
18 19 20
HL 450
20
HL 550
19
27
HL 56
19
21
HL 218
25
26
HL 68
HL 202
22
23
31
HL 20
9
HL 552
28
HL 720
9
10
HL 64
11
HL 204
24
HL 19
1
2
HL 719
1
2
HL 51
18 19 20
HL 451
20
HL 57
19
21
HL 219
25
26
HL 69
HL 203
22
23
HL 21
HL 721
31
9
9
10
HL 65
11
HL 205
24
HEAD SYLE
GRIP DIAMETER
& VARIATION
STRENGTH
LE V E L
STANDARD DIAMETER
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
PROTRUDING, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING,TENSION
160 KSI MIN TENSILE
1/16 GRIP VARIATION
STANDARD DIAMETER
PROTRUDING,TENSION
160 KSI MIN TENSILE
1/16 GRIP VARIATION
PROTRUDING,TENSION
160 KSI MIN TENSILE
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, SHEAR
95 KSI SHEAR
1/16 GRIP VARIATION
95 KSI SHEAR
FLUSH, SHEAR
1/16 GRIP VARIATION
STANDARD DIAMETER
160 KSI MIN TENSILE
FLUSH, TENSION
1/16 GRIP VARIATION
STANDARD DIAMETER
FLUSH, TENSION
160 KSI MIN TENSILE
1/16 GRIP VARIATION
160 KSI MIN TENSILE
FLUSH, TENSION
1/16 GRIP VARIATION
PROTRUDING, SHEAR
NOTES:
1.
FINISH
PASSIVATED PER MIL-S-5002
(SEE NOTE #1)
TYPE II, CLASS 3
PART
NUMBER
COLLAR
CODE
HL 40
1
2
HL 440
1
2
HL 140
4
5
HL 48
9
29
TYPE II, CLASS 3
HL 448
9
29
HL 248
(SEE NOTE #1)
TYPE II, CLASS 3
6
HL 41
1
2
HL 441
1
2
HL 141
4
5
HL 49
9
29
TYPE II, CLASS 3
HL 449
9
29
HL 249
PARTS MAY BE ORDERED WITH A LUBRICANT. CONTACT VOI-SHAN ENGINEERING
FOR DETAILS.
6
H-11
HEAD SYLE
PROTRUDING, SHEAR
PROTRUDING, SHEAR
PROTRUDING, SHEAR
PROTRUDING,TENSION
PROTRUDING,TENSION
PROTRUDING,TENSION
FLUSH, SHEAR
FLUSH, SHEAR
FLUSH, SHEAR
FLUSH, TENSION
FLUSH, TENSION
FLUSH, TENSION
GRIP DIAMETER
& VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
3/32 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
3/32 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
3/32 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
1/16 GRIP VARIATION
STANDARD DIAMETER
3/32 GRIP VARIATION
STRENGTH
LE V E L
156 KSI MIN. SHEAR
125 KSI MIN. SHEAR
132 KSI MIN. SHEAR
260-280 KSI MIN.
TENSILE
210 KSI MIN. SHEAR
220 KSI MIN. TENSILE
156 KSI MIN. SHEAR
125 KSI MIN. SHEAR
132 KSI MIN. SHEAR
260-280 KSI MIN.
TENSILE
210 KSI MIN. SHEAR
220 KSI MIN. TENSILE
FINISH
DIFFUSED NICKEL-CADMIUM PER
AMS 2416 OR ZINC-NICKEL PER AMS 2417
VACUUM DEPOSITED CADMIUM
PER MIL-C-8837, TYPE II, CLASS 3
AMS 2416 OR VACUUM DEPOSITED
CADMIUM PER MIL-C-8837, TY. II, CL. 3
PART
COLLAR
NUMBER CODE
HL 14
16
HL 414
12
HL 614
17
HL 16
16
HL 416
12
HL 616
17
HL 15
16
HL 415
12
HL 615
17
HL 17
16
HL 417
12
HL 617
17
1
2
HL 70
HL 79
HL 82
6
3
HL 94
HL 97
7
HL 75
HL 87
HL 272
HL 77
HL 277
HL 75
HL 87
16
HL 73
26
27
HL 93
HL 197
31
HL 394
HL 90
25
HL 287
29
HL 587
33
HL 377
HL 594
HL 279
HL 579
HL 85
HL 297
20
24
28
23
HL 93
HL 293
HL 83
HL 490
HL 579
HL 92
HL 492
HL 83
HL 91
HL 579
15
19
23
HL 73
HL 89
HL 273
HL 75
HL 86
HL 87
HL 87
HL 673
HL 94
10
14
18
22
HL 79
HL 82
HL 79
HL 273
5
9
13
17
21
HL 72
HL 75
HL 86
8
12
11
4
HL 84
30
HL 78
34
HL 278
35
REFER TO PRINTED MANUEL FOR PATENT AND LICENSING INFO.
D DIA.
FIRST
NOM.
D ASH
DIA.
NO.
**
A
DIA.
B
REF.
6
TD
WITHOUT
WITH COATING
DIA.
COATING OR
OR SOLID
SOLID
FILM LUBE
FILM LUBE
.262
.1635
.1635
.1595
-5
5/32
.312
.242
.1630
.1625
.1570
.315
.1695
.1895
.1840
-6
3/16
.325
.295
.1690
.1885
.1810
.412
.2495
.2495
.2440
-8
1/4
.395
.387
.2490
.2485
.2410
.505
.3120
.3120
.3060
-10
5/16
.500
.475
.3116
.3110
.3020
.600
.3745
.3745
.3680
-12
3/8
.645
.565
.3740
.3735
.3640
.4370
.4370
.4310
.676
.635
-14
7/16
.4365
.4360
.4260
.641
.4995
.4995
.4930
.770
-16
1/2
.685
.735
.4990
.4985
.4880
.864
.5615
.5615
.5550
-18
9/16
.770
.829
.5610
.5605
.5500
.953
.6240
.6240
.6180
.825
-20
5/8
.6235
.6230
.6120
.918
.7490
.7490
.7430
1.108
1.050
-24
3/4
.7485
.7460
.7370
1.066
.8740
.8740
.8680
1.285
-28
7/8
1.210
1.241
.8735
.8730
.8610
1.468
.9990
.9990
.9930
-32
1
1.390
1.424
.9985
.9980
.9860
**-5 SIZE MUST BE INSTALLED USING A TORQUE CONTROLLED HEX KEY.
SOCKET
G
REF.
.020
.025
.030
.035
.040
.045
.050
.055
.060
.070
.090
.110
H
R
RAD.
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
.127
.112
.137
.122
.151
.136
.187
.172
.218
.203
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
CHAMFER
REF.
1/32" x 37º
1/32" x 37º
1/32" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
1/16" x 37º
1/16" x 37º
1/16" x 37º
5/64" x 37º
5/64" x 37º
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
W
HEX.
T
DEPTH
Y
DIA.
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.365
.455
.425
.580
.550
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
..308
.378
.471
.451
.018
.598
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
4,010
1,940
5,380
2,500
9,300
4,300
14,600
6,300
21,000
8,700
28,600
12,100
37,300
15,300
47,200
19,000
58,300
23,000
83,900
30,700
114,000
45,000
149,000
60,000
Patented internationally.“Hi-Lok” and
“HL” are internationally registered trademarks
of Hi-Shear Corporation.
DRAWN
Brlej
HL 10
APPORVED
DATE
11-26-62
DATE
Cesena 11-26-62
REVISION
33
DATE
D.P.S.
9-15-89
PORTRUDING TENSION HEAD
ALLOY STEEL
1/16” GRIP VARIATION
DRAWING NUMBER
HL10 SHEET 1 OF 2
C 1989, Hi-Shear Corporation
GENERAL NOTES:
1.
2.
3.
4.
5.
6.
CONCENTRICITY: “A” to “D” diameter within .010 FIR.
Dimensions to be met after finish.
Surface texture per ANSI B46.1
Hole preparation per NAS618.
Use HL110 for oversize replacement.
Maximum “D” diameter may be increased by .0002 to
allow for solid film or aluminum coating application.
7. Dimensions to be met before finish for “VY” code only.
MATERIAL:
6Al-4V titanium alloy per Spec. AMS4928 or AMS4967.
HEAT TREAT:
95,000 pal shear minimum.
FINISH;
HL10V-( )-( ) = Cetyl alcohol lube per Hi-Shear pec. 305
HL10VAP-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear spec. 294
and cetyl alcohol lube per Hi-Shear pec. 305
HL10VAZ-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear spec. 294
with color code black on thread end, and cetyl alcohol
tube per Ill-Shear pec. 305.
HL10VBJ-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type II,
Class 3, and cetyl alcohol lube per Hi-Shear pec. 305
HL10VBV-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type II,
Class 3, with color code blue on thread end.
HL10VF-( )-( )= Surface coating per Ill-Shear Spec. 306, Type I, color
blue, and cetyl alcohol lube per Hi-Shear pec. 305.
HL10VLJ-( )-( )= Surface coating per Hi-Shear Spec. 306, Type II, and
solid film lube per MIL-L-8937.
HL10VLV-( )-( )= Phosphate fluoride treat and Esna-Lube No. 382
(Everlube Corp.)
HL10VR-( )-( )= Surface coating per Hi-Shear Spec. 306, Type II, and
solid film lube per “Electrofilm” 4396.
HL10VRA-( )-( )= Phosphate fluoride treat with color code red on thread
end and cetyl alcohol lube per Hi-Shear Spec. 305.
HL10VSY-( )-( )= Phosphate fluoride treat, solid film lube per MIL-L-8937
and color code red on thread end.
HL10VT-( )-( )= Surface coating per Hi-Shear Spec.306, Type I, color
pink, and cetyl alcohol lube per Hi-Shear Spec. 305
HL10VTA-( )-( )= Anodize Ti-Shield Hi and HI-Kote 2 solid film lube per
Hi-Shear Spec. 292 plus cetyl alcohol lube per Hi-Shear
Spec. 305.
HL10VTB-( )-( )= Hi-Kote solid film lube per Hi-Shear Spec. 292 and
cetyl alcohol lube per Hi-Shear Spec. 305.
HL10VTF-( )-( )= Hi-Kote solid film lube per Hi-Shear Spec. 292.
HL10VTL-( )-( )= Anodize per Hi-Shear Ti-Shield Hi, solid film lube per
DAG-259, and cetyl alcohol lube per Hi-Shear Spec. 305;
or anodize per Tiodize Type ii, solid film lube per
TI-O-LUBE TAL-58, and cetyl alcohol lube per Hi-Shear
Spec. 305.
HL10VTT-( )-( )= Translube.
HL10VUE-( )-( )= Suface coating per Hi-Shear Spec. 306, Type II, and cetyl
alcohol lube per Hi-Shear Spec. 305.
SPECIFICATION:
? HL10VUU-( )-( )= Suface coating per Hi-Shear Spec. 306, Type II,
and solid film lube per “Lubeco” 2133, Type II.
HL10VV-( )-( )= Solid film lube per “Lubeco” 2133, Type II.
7 HL10VY-( )-( )= Surface coating per HI-Shear Sec. 306,Type I,
color blue, and solid film lubricant per M86
(British Aircraft Corp. Spec. MP-1071).
Hi-Lok Product Specification 342.
To prevent seizing and galling, the following combinations are recommended.
RECOMMENDED COLLARS
HL70, HL79, HL82, HL94K, HL94V, HL97K, HL97V, HL379V, HL379SY
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70D, HL79D, HL82D, HL94DU, HL97DU
HL70, HL79, HL82, HL94, HL97
CODE:
First dash number indicates nominal diameter in 1/32nds
Second dash number indicates maximum grip in 1/16ths.
See “Finish” note for explanation of code letters.
HOW TO ORDER EXAMPLES:
Pin Part Number Only
HL10VUE-8-8
8-16 or 1/2 Maximum Grip Length
8/32 or 1/4 Nominal Diameter Pin
Type II, Black Finish
Pin Part Number
HL70, HL79, HL82, HL379, HL379V, HL379SY
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97, HL379, HL379V, HL379SY
Pin and Collar Assembly Part Number Combination
HL10VUE70-8-8
Size and Grip Length, See Above Example
Collar Part Number
Pin Finish
Pin Part Number
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70TF, HL94TF
HL70, HL79, HL82, HL94, HL97
HL70TT
HL70, HL79, HL82, HL94, HL94K, HL94V, HL97, HL97K, HL97V, HL379,
HL379V, HL379SY
HL70, HL79, HL82, HL94, HL94K, HL94V, HL97, HL97K, HL97V
HL70, HL79, HL82, HL94, HL97, HL379
HL10
SHEET 2 OF 2
2-1601
D DIA.
FIRST
NOM.
D ASH
DIA.
NO.
**
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
A
DIA.
.2012
.2504
.3016
.2866
.3848
.3898
.4739
.4689
.5664
.5554
.6680
.6620
.7540
.7480
.8380
.8310
.9250
.9180
1.0970
1.0850
1.3197
1.3030
1.5180
1.4905
B
REF.
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
1.210
1.390
6
WITHOUT
WITH
COATING
COATING
OR SOLID OR SOLID
FILM LUBE FILM LUBE
.1635
.1635
.1630
.1625
.1895
.1895
.1890
.1885
.2495
.2495
.2490
.2485
.3120
.3120
.3115
.3110
.3745
.3745
.3740
.3735
.4370
.4370
.4365
.4360
.4995
.4995
.4990
.4985
.5615
.5615
.5610
.5605
.6240
.6240
.6235
.6230
.7490
.7490
.7485
.7460
.8740
.8740
.8735
.8730
.9990
.9990
.9985
.9980
SOCKET
TD
DIA.
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8680
.8610
.9930
.9860
F
.004
.005
.006
.007
.008
.009
.010
.010
.010
.012
.014
.014
H
.410
.0380
.0470
.0450
.0610
.0599
.0080
.0660
.0780
.0760
.0969
.0944
.1008
.1043
.1160
.1131
.1260
.1230
.1460
.1410
.1870
.1800
.2180
.2100
R
Z
RAD. MAX
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.010
S
CHAMFER
REF.
1/32" x 37º
.015
1/32" x 37º
.015
1/32" x 37º
.015
3/64" x 37º
.015
3/64" x 37º
.022
3/64" x 37º
.022
3/64" x 37º
.022
1/16" x 37º
.022
1/16" x 37º
.022
1/16" x 37º
.022
5/64" x 37º
.032
5/64" x 37º
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
T
W
DEPTHEX.
H
Y
DIA.
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
..308
.378
.471
.451
.018
.598
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.365
.455
.425
.580
.550
DOUBLE
THENSION
SHEAR
POUNDS
POUNDS
MINIMUM
MINIMUM
4,010
1,200
5,380
2,000
9,300
3,700
14,600
5,000
21,000
7,200
28,600
10,000
37,300
13,500
47,200
17,000
58,300
21,000
83,900
30,700
114,000
42,000
149,000
55,000
Patented internationally.“Hi-Lok” and
“HL” are internationally registered trademarks
of Hi-Shear Corporation.
DRAWN
Brlej
DATE
11-26-62
HL 11
APPORVED
DATE
Cesena 11-26-62
REVISION
37
DATE
D.P.S.
9-16-89
100º FLUSH SHEAR HEAD
TITANIUM
DRAWING NUMBER
HL11 SHEET 1 OF 2
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH;
1.
2.
3.
4.
5.
6.
7.
8.
Head edge out of roundness shall not exceed “F”.
Concentricity: Conical surface of head to “D” diameter within .005 FIR.
“H” is dimensioned from maximum “D” diameter.
Use RL111 for oversize replacement.
10. Curved or flat edge manufacturer’s option.
11. Non-lubed pins must be used with lubed collars or with wet sealant.
95,000 psi shear minimum.
tube per Ill-Shear pec. 305.
11
HL11VBU-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type I,
Class 3, with color code yellow on thread end.
11
HL11VCB-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type I,
Class 3, with color code black on thread end, and
cetyl alcohol lube per Hi-Shear pec. 305.
HL11VF-( )-( )= Surface coating per Ill-Shear Spec. 306, Type I, color
HL11VHA-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear Spec. 204
with color code black on thread end, and apply precoat
No. PR1436G sealant (.002-.005 thick) plus cetyl
(Everlube Corp.)
HL11VT-( )-( )= Surface coating per Hi-Shear Spec.306, Type I, color
Spec. 305.
HL11VTB-( )-( )= Hi-Kote solid film lube per Hi-Shear Spec. 292 and
HL11VTF-( )-( )= Hi-Kote solid film lube per Hi-Shear Spec. 292.
HL11VTL-( )-( )= Anodize per Hi-Shear Ti-Shield Hi, solid film lube per
DAG-259, and cetyl alcohol lube per Hi-Shear Spec. 305;
or anodize per Tiodize Type ii, solid film lube per
TI-O-LUBE TAL-58, and cetyl alcohol lube per Hi-Shear
Spec. 305.
HL11VTT-( )-( )= Translube.
HL11VUE-( )-( )= Suface coating per Hi-Shear Spec. 306, Type II, and cetyl
?
9
SPECIFICATION:
2-1501
HL11VUU-( )-( )= Suface coating per Hi-Shear Spec. 306, Type II,
and solid film lube per “Lubeco” 2133, Type II.
HL11VV-( )-( )= Solid film lube per “Lubeco” 2133, Type II.
HL11VY-( )-( )= Surface coating per HI-Shear Sec. 306,Type I,
(British Aircraft Corp. Spec. MP-1071).
HL70, HL79, HL82, HL94, HL97
CODE:
HL70, HL79, HL82, HL94, HL97
see “Finish” note for explanation of code letters.
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL11VUE-8-8
Type II, Black Finish
Pin Part Number
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL11VUE70-8-8
Collar Part Number
Pin Finish
Pin Part Number
HL70, HL79, HL82, HL379, HL379V, HL379SY
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97, HL379, HL379V, HL379SY
HL70, HL79, HL82, HL94, HL97
HL70, HL79, HL82, HL94, HL97
HL70TF, HL94TF
HL70, HL79, HL82, HL94, HL97
HL70TT
HL70, HL79, HL82, HL94, HL94K, HL94V, HL97, HL97K, HL97V, HL379,
HL379V, HL379SY
HL70, HL79, HL82, HL94, HL97, HL379\
HL11
SHEET 2 OF 2
D DIA.
FIRST
NOM. A
D ASH
DIA. DIA.
NO.
**
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
.322
.306
.377
.357
.440
.415
.505
.472
.600
.530
.676
.592
.770
.717
.877
.842
.953
.995
1.160
1.110
1.330
1.200
1.510
1.470
6
B
WITHOUT
WITH
REF. COATING OR COATING
SOLID
OR SOLID
FILM LUBE FILM LUBE
.1635
.1635
.312
.1630
.1625
.1695
.1895
.325
.1690
.1885
.2495
.2495
.395
.2490
.2485
.3120
.3120
.500
.3116
.3110
.3745
.3745
.545
.3740
.3735
.4370
.4370
.635
.4365
.4360
.4995
.4995
.685
.4990
.4985
.5615
.5615
.770
.5610
.5605
.6240
.6240
.825
.6235
.6230
.7490
.7490
1.050
.7485
.7460
.8740
.8740
1.210
.8735
.8730
.9990
.9990
1.390
.9985
.9980
SOCKET
TD
DIA.
.1595
.1570
.840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
G
REF.
.030
.035
.045
.055
.075
.095
.095
.125
.140
.200
.250
.300
H
R
RAD.
.065
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
CHAMFER
REF.
1/32" x 37º
1/32" x 37º
1/32" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
1/16" x 37º
1/16" x 37º
1/16" x 45º
5/64" x 45º
5/64" x 45º
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
T1
W
T
Y
DEPTH
HEX. DEPTH
DIA.
MAX
.0045
.0035
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2656
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5010
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.330
.300
.400
.370
.620
.490
.160
.175
.200
.240
.275
.315
.360
.400
.440
.465
.600
.715
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
..398
.378
.471
.451
.618
.598
DOUBLE
TENSION
SHEAR
POUNDS
POUNDS
MINIMUM
MINIMUM
4,010
2,180
5,380
3,180
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,000
37,300
25,000
47,200
32,400
58,300
41,000
83,900
59,500
114,000
81,500
149,000
100,000
SEE COLLAR STANDARDS
FOR COLLAR STRENGTHS
LOWER STRENGTH (PIN
OR COLLAR) DETERMINES
SYSTEM STRENGTH
** -5 SIZE MUST BE INSTALLED USING A TORQUE CONTROLLED HEX KEY.
“Hi-Lok” and “HL” are Internationally Registered
Trademarks of Hi-Shear Corporation.
DRAWN
DATE
Martin 7-19-63
HL 12
APPORVED
DATE
Cesena 7-23-63
REVISION
36
2-1601
DATE
D.P.S.
2-13-91
PROTRUDING TENSION HEAD
TITANIUM
DRAWING NUMBER
HL12 SHEET 1 OF 2
GENERAL NOTES:
1.
2.
3.
4.
5.
6.
CONCENTRICITY: “A” to “D” diameter within .010 FIR.
8. Non-lubed pin must be used with lubed collars or with wot scalant.
MATERIAL:
CODE:
First dash number indicates nominal diameter in 1/32nds.
Second dash number indicats maximum grip in 1/16ths.
HEAT TREAT:
160,000 psi tensile minimum (95,000 psi shear minimum).
RECOMMENDED COLLARS
FINISH;
HL12VAT-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear spec. 294
tube per Hi-Shear pec. 305.
HL12VF-( )-( )= Surface coating per Hi-Shear Spec. 306, Type I, color
(Everlube Corp.)
HL12VSS-( )-( )= Grip blast top of head with color light blue on thread end
and cetyl alcohol lube per Hi-Shear Spec. 305.
HL75K, HL75V, HL75DU, HL86D, HL86DU, HL 198V, HL198SY, HL 280SY
9
HL12VT-( )-( )=
HL12VTA-( )-( )=
HL12VTB-( )-( )=
HL12VTF-( )-( )=
HL12VUE-( )-( )=
HL12VV-( )-( )=
HL12VY-( )-( )=
SPECIFICATION:
Surface coating per Hi-Shear Spec.306, Type I, color
Anodize Ti-Shield Hi and HI-Kote 2 solid film lube per
Spec. 305.
Hi-Kote solid film lube per Hi-Shear Spec. 292 and
Hi-Kote solid film lube per Hi-Shear Spec. 292.
Suface coating per Hi-Shear Spec. 306, Type II, and cetyl
Solid film lube per “Lubeco” 2133, Type II.
Surface coating per HI-Shear Sec. 306,Type I,
(British Aircraft Corp. Spec. MP-1071)..
HL12VY8-( )-( )= Hi-Kote 2 solid film lube per Hi-Shear Spec. 292 on
threads only.
CODE:
HL75, HL80
HL75DU, HL80DU, HL198
HL75, HL80
HL12V-8-8
HL75, HL80
HL75K, HL75V, HL75DU, HL198V, HL198SY, HL 280SY
Pin Part Number
HL75, HL75K, HL75V, HL75DU, HL75PB, HL86D, HL86DU, HL86PB
HL12V 86-8-8
Collar Part Number
HL75, HL80, HL198, HL198SY, HL280SY
HL75K, HL75V, HL75DU, HL80D, HL80DU, HL98SY, HL 280SY
Pin Part Number
HL198SY, HL280SY
HL75, HL75PB, HL86, HL86D, HL86PB
HL80TF
HL108, HL108V, HL108PB, HL198SY, HL280
HL75, HL86, HL198
HL86TF
HL12
SHEET 2 OF 2
2-1501
D DIA.
FIRST
NOM.
D ASH
DIA.
NO.
**
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
A
DIA.
.3304
.3256
.3813
.3765
.5966
.5018
.6335
.6287
.7604
.7556
.8884
.8812
1.0139
1.0008
1.1408
1.1337
1.2723
1.2051
1.5308
1.5236
1.7845
1.7773
2.0405
2.0310
B
REF.
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
1.210
1.390
6
WITHOUT
WITH
COATING
COATING
OR SOLID OR SOLID
FILM LUBE FILM LUBE
.1635
.1635
.1630
.1625
.1695
.1895
.1690
.1885
.2495
.2495
.2490
.2485
.3120
.3120
.3116
.3110
.3745
.3745
.3740
.3735
.4370
.4370
.4365
.4360
.4995
.4995
.4990
.4985
.5615
.5615
.5610
.5605
.6240
.6240
.6235
.6230
.7490
.7490
.7485
.7460
.8740
.8740
.8735
.8730
.9990
.9990
.9985
.9980
SOCKET
TD
DIA.
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
F
H
1
.0
04
.005
.006
.007
.008
.009
.010
.010
.010
.012
.014
.014
.0700
.0080
.0805
.0785
.1080
.1060
.1350
.1330
.1620
.1600
.1895
.1805
.2160
.2130
.2430
.2400
.2720
.2690
.3260
.3250
.3820
.3700
.4370
.4330
R
RAD.
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
Z
MAX.
S
CHAMFER
REF.
.010
1/32" x 37º
.015
1/32" x 37º
.015
1/32" x 37º
.015
3/64" x 37º
.015
3/64" x 37º
.022
3/64" x 37º
.022
3/64" x 37º
.025
1/16" x 37º
.025
1/16" x 37º
.025
1/16" x 37º
.025
5/64" x 37º
.025
5/64" x 37º
THREAD
W
HEX.
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
T1
T
DEPTH
DEPTH
MAX.
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.330
.300
.400
.370
.520
.400
.100
.175
.200
.240
.275
.315
.360
.400
.440
.465
.560
.715
Y
DIA.
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.326
.306
.308
.378
.471
.451
.018
.598
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
4,010
2,180
5,380
3,180
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,900
37,300
25,600
47,200
32,400
58,300
41,000
83,900
59,500
114,000
81,500
149,000
186,000
“Hi-Lok” and “HL” are internationally
Registered Trademarks of Hi-Shear Corporation.
DRAWN
Martin
HL 13
APPORVED
DATE
7-22DATE
Cesena 7-23REVISION
32
2-1301
DATE
D.P.S.
5-22-91
C 1991, Hi-Shear
TITANIUM
DRAWING NUMBER
HL13
GENERAL NOTES:
1.
2.
3.
4.
5.
6.
7.
8.
Head edge out of roundness shall not exceed “F”
Concentricity: Conical surface of head to “D” diameter within .005 FIR
“H” dimensioned from maximum “D” diameter.
Surface texture per ANSI B46.1.
Hole perparation per NAS618.
Maximum “D” diameter may be increased by .0002 to allow.
for solid film or aluminum coating application.
9. Non-lubed pins must be used with lubed collars or with wet sealant.
MATERIAL:
HEAT TREAT:
160,000 psi tensile minimum (95,000 psi shear minimum).
RECOMMENDED COLLARS
FINISH;
HL13VAT-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear spec. 294
HL13VF-( )-( )= Surface coating per Hi-Shear Spec. 306, Type I, color
(Everlube Corp.)
HL13VHA-( )-( )= Hi-Kote 1 aluminum coating per Hi-Shear spec. 294
with color code black on thread end, and apply precoat
No. PR1436G sealant (.002-.005 thick), plus cetyl alcohol
9
Surface coating per Hi-Shear Spec.306, Type I, color
Spec. 305.
HL13VTB-( )-( )= Hi-Kote 2 solid film lube per Hi-Shear Spec. 292 and
HL13VTF-( )-( )= Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
9. HL13VU-( )-( )= Bare, no lubricant
HL13VUE-( )-( )= Surface coating per Hi-Shear Spec. 306, Type II, and cetyl
CODE:
HL75, HL80
HL75, HL80
HL75, HL80
HL13V-8-8
HL75K, HL75V, HL75DU, HL80D, HL80DU, HL198V, HL 198SY, HL 280SY
Pin Part Number
HL75, HL75K, HL75V, HL75DU, HL75PB, HL80, HL80D, HL80DU, HL80PB
HL75, HL80, HL108, HL108SY, HL280SY
HL75, HL80
HL13V 86-8-8
Collar Part Number
Pin Part Number
HL198SY, HL280SY
HL13VT-( )-( )=
HL13VV-( )-( )=
HL13VY8-( )-( )=
SPECIFICATION:
Solid film lube per “Lubeco” 2133, Type II.
Hi-Kote 2 solid film lube per Hi-Shear Spec,
292 on threads only.
HL86TF
HL75K, HL75V, HL75DU, HL80D, HL80DU, HL198V, HL198SY, HL 280SY
HL80TF
HL75DU, HL80DU
HL198, HL198V, HL198PB, HL198SY, HL280
HL13
SHEET 2 OF 2
2-1501
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 14
SPECIFICATION:
FIRST
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.565
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.645
.635
.685
D
DIA.
TD
DIA.
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3116
.3745
.3740
.4370
.4365
.4995
.4985
.1695
.1670
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
REF.
.020
.025
.030
.035
.040
.045
.050
H
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
1. Concentricity: “A” to “D” diameter within .010 FIR.
2. Dimensions to be met after finish.
3. Surface texture per ANSI B46.1
4. Hole preparation per NAS616.
5. Evidence of broken edge across points.
6. Use HL214 for oversize replacement.
Vacuum melted H-11 steel alloy per AMS6487
156,000 psi shear minimum (260,000-280,000 psi tensile per Spec. AMS6487)
HL15-( )-( )=
Diffused nickel-cadmuim plating per Spec. AMS2416
HL15B-( )-( )= Vacuum deposited cadmium plate, Type II, Class 2,
per MIL-C-8837, and cetyl alcohol lube per Hi-Shear
Spec. 305.
HL15BJ-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type II,
Class 3, and cetyl alcohol lube per Hi-Shear Spec. 305.
HL15JB-( )-( )= Vacuum deposited cadmium plate, Type II, Class 2,
per MIL-C-8837, with white identification on top of
head,and cetyl alcohol lube per Hi-Shear Spec. 305.
HL15M-( )-( )= Nickel-zinc alloy plating per AMS2417 and cetyl alcohol
lube per Hi-Shear Spec. 305.
S
CHAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
CODE:
W
HEX.
T
DEPTH
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
5
6,580
2,700
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
8,850
3,700
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
15,300
6,400
23,900
10,100
34,500
14,100
46,900
19,000
61,300
25,000
HL14 M -8-8
8/16 or 1/2 Maximum Grip Length
Nickel-Zinc Alloy Plating
Pin Part Number
HL14M 574-8-8
Collar Part Number
Pin Finish
Pin Part Number
Patented Internationally,
DRAWN
Schad
APPORVED
DATE
Cessna 9-10REVISION
23
2-1301
DATE
9-10-
DATE
D.P.S.
5-15-87
C 1981, Hi-Shear
PROTRUDING SHEAR HEAD
H-11 STEEL SLLOY
DRAWING NUMBER
HL14
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 15
SPECIFICATION:
2-1301
FIRST
D ASH
NO.
NOM.
D IA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
D IA.
.2012
.2564
.3016
.2966
.3948
.3898
.4739
.4689
.5604
.5554
.6680
.6620
.7540
.7480
B
REF.
.312
.325
.395
.500
.645
.635
.685
D
D IA.
TD
D IA.
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3116
.3745
.3740
.4370
.4365
.4995
.4990
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
F
.004
.005
.006
.007
.008
.009
.010
H
.0410
.0390
.0470
.0450
.0610
.0590
.0680
.0660
.0780
.0760
.0969
.0944
.1068
.1043
R
RAD .
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
1. Head edge out of roundness shall not exceed “F”
2. Concentricity: Conical surface of head to “D” diameter within .005 FIR
3. “H” dimensioned from maximum “D” diameter.
5. Surface texture per ANSI B46.1.
6. Hole perparation per NAS618.
Vacuum melted H-11 steel alloy per AMS6487
156,000 psi shear minimum (200,000-280,000 psi tensile per Spec. AMS6487)
HL15-( )-( )=
Diffused nickel-cadmuim plating per Spec. AMS2416
HL15B-( )-( )= Vacuum deposited cadmium plate, Type II, Class 2,
per MIL-C-8837, and cetyl alcohol lube per Hi-Shear
Spec. 305.
HL15BJ-( )-( )= I.V.D. aluminum coating per MIL-C-83488, Type II,
HL15M-( )-( )= Nickel-zinc alloy plating per AMS2417 and cetyl alcohol
Z
MAX.
S
C HAMFER
REF.
.010
1/32" x 45º
.015
1/32" x 45º
.015
1/32" x 45º
.015
3/64" x 45º
.015
3/64" x 45º
.022
3/64" x 45º
.022
3/64" x 45º
CODE:
Y
D IA.
D OUBLE
SHEAR
POUND S
MINIMUM
7
6,580
2,120
8,850
3,380
15,300
5,500
SOC KET
THREAD
8-32UNJC -3A
Modi fi ed
10-32UNJF-3A
Modi fi ed
1/4-28UNJF-3A
Modi fi ed
5/16-24UNJF-3A
Modi fi ed
3/8-24UNJF-3A
Modi fi ed
7/16-20UNJF-3A
Modi fi ed
1/2-20UNJF-3A
Modi fi ed
W
T
HEX. D EPTH
.0801
.100
.0791
.080
.0806
.100
.0791
.080
.0967
.110
.0947
.090
.1295
.130
.1270
.110
.1617
.160
.1582
.140
.1930
.190
.1895
.170
.2242
.220
.2207
.200
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
TENSION
POUND S
MINIMUM
23,900
8,700
34,500
12,500
46,900
17,000
61,300
22,000
HL15 M -8-8
Nickel-Zinc Alloy Plating
Pin Part Number
U.S. patents 3,138,987;3,390,906; and foreign patents.
DRAWN
HL15M 574-8-8
Collar Part Number
Pin Finish
Pin Part Number
Schad
APPORVED
DATE
9-10DATE
Cessna 9-10REVISION
22
DATE
D.P.S.
9-3-81
C 1981, Hi-Shear
H-II STEEL SLLOY
DRAWING NUMBER
HL15
FIRST
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
A
DIA.
B
REF.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.565
.676
.641
.770
.735
.864
.829
.953
.918
1.108
1.066
1.285
1.241
1.468
1.424
.312
.325
.395
.500
.645
.635
.685
.770
.825
1.050
1.210
1.390
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
7.
HL 18
SPECIFICATION:
D
DIA.
TD
DIA.
.1635
.1625
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5615
.5605
.6240
.6230
.7490
.7460
.8740
.8730
.9990
.9980
.5550
.5500
.6180
.6120
.7430
.7370
.8080
.8610
.9930
.9860
G
REF.
.020
.025
.030
.035
.040
.045
.050
.055
.060
.070
.090
.110
H
R
RAD.
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.127
.112
.137
.122
.151
.136
.187
.172
.218
.203
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
CHAMFER
REF.
THREAD
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
1/16" x 45º
1/16" x 45º
1/16" x 45º
5/64" x 45º
5/64" x 45º
7. Non-lubed pine must be used with wet sealant or with lubed collar.
Alloy steel per Spec. MIL-S-5000, MIL-S-5626 or MIL-S-6040.
95,000 psi shear minimum (160,000-180,000 psi tensile per Spec. MIL-H-6875)
HL18-( )-( )=
Cadmium plate per Spec. QQ-P-416, Type I, Class 2, and
HL18PB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, color
bronze and cetyl alcohol lube per Hi-Shear Spec. 305.
HL18PN-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2
HL18TF-( )-( )= Cadmium plate per Spec. QQ-P-416, Type III, Class 2, and
Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
SOCKET
W
HEX.
T
DEPTH
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.290
.270
.330
.305
.395
.365
.455
.425
.580
.550
CODE:
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
6
4,010
1,940
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.326
.306
.308
.378
.471
.451
.618
.598
5,380
2,500
9,300
4,300
14,600
6,300
21,000
8,700
28,600
12,100
37,300
15,300
47,200
19,000
58,300
23,000
83,900
30,700
114,000
45,000
149,000
60,000
HL18PB-8-8
Type II Cadmium Plate, Color Bronze
Pin Part Number
HL18PB 70-8-8
Collar Part Number
Pin Finish
Pin Part Number
DRAWN
APPORVED
DATE
7-24-02
REVISION
24
2-1301
DATE
7-19-02
DATE
D.P.S.
8-25-92
C 1992, Hi-Shear
ALLOY STEEL
DRAWING NUMBER
HL18
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 19
SPECIFICATION:
2-1301
FIRST
D ASH
NO.
NOM.
D IA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
A
D IA.
.2012
.2504
.3016
.2966
.3948
.3898
.4739
.4689
.5604
.5554
.6680
.6620
.7540
.7480
.8380
.8310
.9250
.9180
1.0970
1.0850
1.3197
1.3030
1.5180
1.4995
B
REF.
.312
.325
.395
.500
.645
.635
.685
.770
.825
1.050
1.210
1.390
D
D IA.
TD
D IA.
.1635
.1630
.1695
.1690
.2495
.2490
.3120
.3116
.3745
.3740
.4370
.4365
.4995
.4990
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5615
.5610
.6240
.6235
.7490
.7480
.8740
.8735
.9990
.9980
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
F
.004
.005
.006
.007
.008
.009
.010
.010
.010
.012
.014
.014
H
R
RAD .
.0410
.0390
.0470
.0450
.0610
.0590
.0080
.0660
.0780
.0760
.0969
.0944
.1068
.1043
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
.1160
.1130
.1260
.1230
.1460
.1410
.1870
.1800
.2180
.2100
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
5. Surface texture per ANSI H46.1.
10. Non-lubed pine must be used with lubed collars.
95,000 psi shear minimum (160,000-180,000 psi tensile per Spec. MIL-H-6875)
HL19-( )-( )=
HL19HC-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, and
apply precoat No. PB1436G sealant (.002-.005 thick) plus
HL19PB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, color
bronze and cetyl alcohol lube per Hi-Shear Spec. 305.
HL19PN-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2 (see Note 5).
HL19TF-( )-( )= Cadmium plate per Spec. QQ-P-416, Type III, Class 2, and
Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
Z
MAX.
S
C HAMFER
REF.
.010
1/32" x 45º
.015
1/32" x 45º
.015
1/32" x 45º
.015
3/64" x 45º
.015
3/64" x 45º
.022
3/64" x 45º
.022
3/64" x 45º
.022
1/16" x 45º
.025
1/16" x 45º
.030
1/16" x 45º
.035
5/64" x 45º
.035
5/64" x 45º
CODE:
Y
D IA.
D OUBLE
SHEAR
POUND S
MINIMUM
8
4,010
1,200
5,380
2,000
SOC KET
THREAD
8-32UNJC -3A
Modi fi ed
10-32UNJF-3A
Modi fi ed
1/4-28UNJF-3A
Modi fi ed
5/16-24UNJF-3A
Modi fi ed
3/8-24UNJF-3A
Modi fi ed
7/16-20UNJF-3A
Modi fi ed
1/2-20UNJF-3A
Modi fi ed
W
HEX.
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
T
D EPTH
.135
.115
.135
.115
.150
.130
.170
.150
.200
.180
.230
.210
.260
.240
9/16-18UNJF-3A
Modi fi ed
5/8-18UNJF-3A
Modi fi ed
3/4-16UNJF-3A
Modi fi ed
7/8-14UNJF-3A
Modi fi ed
1-12UNJF-3A
Modi fi ed
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.290
.270
.330
.305
.395
.365
.455
.425
.580
.550
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.326
.306
.308
.378
.471
.451
.618
.598
TENSION
POUND S
MINIMUM
9,300
3,700
14,600
5,000
21,000
7,200
28,600
10,000
37,300
13,500
47,200
17,000
58,300
21,000
83,900
30,700
114,000
42,000
149,000
55,000
HL19PB-8-8
Type II Cadmium Plate, Color Bronze
Pin Part Number
HL19PB 86-8-8
Collar Part Number
Pin Finish
Pin Part Number
DRAWN
3-11-63
APPORVED
DATE
J.C.S.
DATE
7-20-62 Cesena
REVISION
26
DATE
D.P.S.
ALLOY STEEL
DRAWING NUMBER
8-25-
HL19
FIRST
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 20
SPECIFICATION:
A
DIA.
.322
.306
.377
.357
.440
.415
.502
.472
.585
.530
.627
.592
.752
.717
.877
.842
.953
.918
1.150
1.110
1.330
1.200
1.510
1.470
B
REF.
.312
.325
.395
.500
.645
.635
.685
.770
.825
1.050
1.210
1.390
D
DIA.
TD
DIA.
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3116
.3745
.3740
.4370
.4365
.4995
.4990
.5615
.5610
.6240
.6235
.7490
.7485
.8740
.8735
.9990
.9985
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
G
REF.
.030
.035
.045
.055
.075
.095
.095
.125
.140
.200
.250
.300
H
.060
.055
.074
.064
.090
.077
.112
.098
.140
.130
.160
.150
.188
.178
.210
.200
.238
.228
.335
.320
.385
.370
.435
.420
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
CHAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
1/16" x 45º
1/16" x 45º
1/16" x 45º
5/64" x 45º
5/64" x 45º
3. Non-lubed pine must be used with wet sealant or with lubed collar.
7. Use hl64 for oversize replacement.
100,000-180,000 psi tensile per Spec. MIL-H-6875.
HL20-( )-( )=
HL20BC-( )-( )= Cadmium plate per Spec. QQ-P-416, Type I, Class 2, and
ceytal alcohol lube per Hi-Shear Spec. 305.
HL20N-( )-( )= Diffused nickel-cadmium plate per AMS2416 and cetyl alcohol
HL20PB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, and
HL20RB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, color violet
to purple, and cetyl alcohol lube per Hi-Shear Spec. 305.
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
CODE:
W
HEX.
T
DEPTH
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.365
.400
.370
.520
.490
T1
DEPTH
MAX
.165
.175
.200
.240
.275
.315
.360
.400
.440
.520
.560
.715
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
6
4,010
2,180
5,380
3,180
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.326
.306
.308
.378
.471
.451
.618
.598
TENSION
POUNDS
MINIMUM
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,900
37,300
25,600
47,200
32,400
58,300
41,000
83,900
59,500
114,000
81,500
149,000
100,000
HL20PB-8-8
Type II Cadmium Plate
Pin Part Number
HL20PB 86-8-8
Collar Part Number
Pin Finish
Pin Part Number
U.S. Patentes 3,390,906; and foreign patents.
“Hi-Lok” and “HL” are Registered
ALLOY STEEL
REVISION
21
2-1301
DATE
D.P.S.
3-5-85
C 1985, Hi-Shear
1
FIRST
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 21
SPECIFICATION:
A
DIA.
.3304
.3256
.3813
.3765
.5866
.5018
.6339
.6287
.7604
.7556
.8884
.8812
1.0139
1.0068
1.1408
1.1337
1.2723
1.2651
1.5308
1.5236
B
REF.
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
D
DIA.
TD
DIA.
.1635
.1625
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.5615
.5605
.6240
.6230
.7490
.7480
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
F
.004
.005
.006
.007
.008
.009
.010
.010
.010
.012
9
H
R
RAD.
.0700
.0680
.0805
.0785
.1080
.1860
.1350
.1330
.1620
.1600
.1895
.1865
.2160
.2130
.2430
.2400
.2720
.2690
.3280
.3250
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
050
.040
.050
.040
.050
.050
Z
MAX.
.010
1/32" x 45º
.015
1/32" x 45º
.015
1/32" x 45º
.015
3/64" x 45º
.015
3/64" x 45º
.022
3/64" x 45º
.022
3/64" x 45º
.025
1/16" x 45º
.025
1/16" x 45º
.025
1/16" x 45º
5. Non-lubed pins must be used with lubed collars.
6. Surface texture per ANSI H46.1.
100,000-160,000 psi tensile per Spec. MIL-H-6876
HL21-( )-( )=
HL21BC-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, and
apply precoat No. PB1436G sealant (.002-.005 thick) plus
HL21N-( )-( )= Diffused nickel-cadmium plate per AMS2416 and cetyl alcohol
HL21PB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, and
HL21RB-( )-( )= Cadmium plate per Spec. QQ-P-416, Type II, Class 2, color violet
to purple, and cetyl alcohol lube per Hi-Shear Spec. 305.
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
8
4,010
2,180
5,380
3,180
SOCKET
S
CHAMFER
REF.
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
CODE:
W
HEX.
T
DEPTH
.0801
.0791
.0806
.0701
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.365
T1
DEPTH MAX.
.165
.175
.200
.240
.275
.315
.360
.400
.440
.520
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
.398
.378
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,900
37,300
25,600
47,200
32,400
58,300
41,000
83,900
59,500
SEE COLLAR STANDARDS
FOR COLLAR STRENGTHS
LOWER STRENGTH (PIN
OR COLLAR) DETERMINES
SYSTEM STRENGTH
HL21PB-8-8
Type II Cadmium Plate
Pin Part Number
HL21PB 86-8-8
Collar Part Number
Pin Finish
Pin Part Number
U.S. Patented Internationally
DRAWN
3-11-63
APPORVED
DATE
Rio
DATE
3-13-63
REVISION
19
2-1301
TENSION
POUNDS
MINIMUM
DATE
D.P.S.
1-11-85
C 1985, Hi-Shear
A-286 HIGH TEMPERATURE ALLOY
DRAWING NUMBER
HL21
D DIA.
FIRST
D ASH
NO.
NOM.
DIA.
-4
1/8
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
? FINISH:
HL 40
SPECIFICATION:
A
DIA.
.240
.220
.262
.242
.315
.295
.412
.387
.505
.475
.600
.565
.670
.641
.770
.735
.864
.829
.963
.918
1.108
1.666
1.
2.
3.
4.
5.
6.
B
REF.
.294
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
WITHOUT
SOLID
FILM
LUBE
.1375
.1370
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3116
.3745
.3740
.4370
.4365
.4995
.4990
.5615
.5610
.6240
.6235
.7490
.7485
6
SOCKET
WITH
SOLID
FILM
LUBE
.1375
.1365
.1635
.1625
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.5615
.5605
.6240
.6230
.7490
.7480
TD
DIA.
.1335
.1310
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
G
REF.
.020
.020
.025
.030
.035
.040
.045
.050
.055
.060
.070
H
.042
.032
.047
.037
.055
.045
.069
.059
.078
.008
.088
.078
.105
.093
.115
.103
.127
.112
.137
.122
.151
.136
Concentricity: “A” to “D” diameter within .010 FIR.
Non-lubed pine must be used with lubed collar.
7. Use RL140 for oversize replacement.
A-286 high temperature alloy per Spec. AMS5737 or AMS5731.
95,000 psi shear minimum at 70ºF
HL40-( )-( )=
Passivate per Hi-Shear Spec. 258 and cetyl alcohol lube
per Hi-Shear Sec 305.
HL40DL-( )-( )= Kelgard FA or EM620C solid film lube per MIL-L-46010,
Type I, and cetyl alcohol lub per MIL-L-87132.
HL40DU-( )-( )= Solid film lubricant per “Lubeco” M390
3 HL40GU-( )-( )= Solid film lube per MIL-L-46010, Type I.
3 HL40PY-( )-( )= Passivate per Hi-Shear Spec. 258
HL40TF-( )-( )= Hi-Kote 2 solid film lube per Hi0Shear Spec 292.
HL40V-( )-( )= Solid film lubricant per “Lubeco” 2123, Type II.
R
RAD.
.020
.010
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
S
CHAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
1/16" x 45º
1/16" x 45º
1/16" x 45º
CODE:
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
8
2,840
1,350
8
4,010
1,940
5,380
2,500
9,300
4,300
THREAD
6-32UNJC-3A
Modified
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
W
HEX.
T
DEPTH
.0645
.0635
.0801
.0791
.0806
.0701
.0967
.0947
.1295
.1270
1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.100
.085
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.365
Y
DIA.
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
.398
.378
14,600
6,300
21,000
8,700
28,600
12,100
37,300
15,300
47,200
19,000
58,300
23,000
83,900
30,700
HL40-8-8
Pin Part Number
HL40 V 79-8-8
Collar Part Number
Pin Finish
Pin Part Number
Patented Internationally
DRAWN
APPORVED
DATE
M.E.C. 10-17-62
REVISION
21
2-1301
DATE
C.E.K. 10-17-62
DATE
D.P.S.
8-13-89
DRAWING NUMBER
HL40
D DIA.
FIRST
D ASH
NO.
NOM.
DIA.
-4
1/8
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HL 41
SPECIFICATION:
2-1301
A
DIA.
.2219
.2171
.2612
.2564
.3016
.2966
.3948
.3898
.4739
.4089
.5004
.5554
.6080
.6620
.7540
.7480
.8380
.8310
.9250
.9180
1.0970
1.0850
1.
2.
3.
4.
5.
6.
7.
8.
B
REF.
.290
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
WITHOUT
SOLID
FILM
LUBE
.1375
.1370
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3115
.3745
.3740
.4370
.4365
.4995
.4990
.5615
.5610
.6240
.6235
.7490
.7485
SOCKET
8
WITH
SOLID
FILM
LUBE
.1375
.1365
.1635
.1625
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.5615
.5605
.6240
.6230
.7490
.7460
TD
DIA.
.1335
.1310
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
F
.003
.004
.005
.006
.007
.008
.009
.010
.010
.010
.012
H
.0354
.0334
.0410
.0390
.0470
.0449
.0610
.0589
.0079
.0058
.0780
.0759
.0909
.0944
.1068
.1043
.1100
.1131
.1200
.1230
.1400
.1410
Non-lubed pine must be used with lubed collars.
Surface texture per ANSI H46.1.
Maximum “D” dimater may be increased by .0002 to allow for
solid film application.
9. Use Hl141 for oversize replacement.
11. Curved or bent edge manufacturer’s option.
100,000 psi tensile minimum (95,000 psi shear minimum) at 70ºF
HL41-( )-( )=
HL41DL-( )-( )= Kelgard FA or EM620C solid film lube per MIL-L-46010,
Type I, and ectyl alcohol lub per MIL-L-8937.
HL41DU-( )-( )= Solid film lube
5 HL41GU-( )-( )= Solid film lube per AMS2410.
HL41K-( )-( )= Solid film lubricant per “Lubeco” 905.
5 HL41PY-( )-( )= Passivate per Hi-Shear Spec. 258
HL41TF-( )-( )= Hi-Kote 2 solid film lube per Hi0Shear Spec 292.
HL41V-( )-( )= Solid film lubricant per “Lubeco” 2123, Type II.
R
Z
RAD. MAX
.020
.010
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
S
CHAMFER
REF.
.010
1/32" x 45º
.010
1/32" x 45º
.015
1/32" x 45º
.015
1/32" x 45º
.015
3/64" x 45º
.015
3/64" x 45º
.022
3/64" x 45º
.022
3/64" x 45º
.022
1/16" x 45º
.022
1/16" x 45º
.022
1/16" x 45º
CODE:
THREAD
6-32UNJC-3A
Modified
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
W
HEX.
T
DEPTH
.0645
.0035
.0801
.0791
.0806
.0701
.0967
.0947
.1295
.1270
1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.100
.085
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.305
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
10
2,840
950
10
4,010
1,290
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
.398
.378
5,380
2,000
9,300
3,7000
14,600
5,000
21,000
7,200
28,600
10,000
37,300
13,500
47,200
17,000
58,300
21,000
83,900
30,700
HL41-8-8
Pin Part Number
HL48 V 86-8-8
Collar Part Number
Pin Finish
Pin Part Number
DRAWN
DATE
C.E.K. 10-17-62
APPORVED
DATE
M.E.C. 10-17-62
REVISION
22
DATE
D.P.S.
9-6-91
DRAWING NUMBER
HL41
D D IA.
FIRST
NOM.
D ASH
D IA.
NO.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
GENERAL NOTES: 1.
2.
3.
4.
5.
6.
A
D IA.
.322
.306
.377
.357
.440
.415
.502
.472
.585
.530
.627
.592
.752
.717
.877
.842
.953
.918
1.150
1.110
1.330
1.200
1.510
1.470
6
B
WITHOUT
WITH
REF. PLATING OR PLATING
SOLID
OR SOLID
FILM LUBE FILM LUBE
.1635
.1635
.312
.1630
.1625
.1895
.1895
.325
.1890
.1885
.2495
.2495
.395
.2490
.2485
.3120
.3120
.500
.3116
.3110
.3745
.3745
.645
.3740
.3735
.4370
.4370
.635
.4365
.4360
.4995
.4995
.685
.4990
.4985
.5615
.5615
.770
.5610
.5605
.6240
.6240
.825
.6235
.6230
.7490
.7490
1.050
.7485
.7460
.8740
.8740
1.210
.8735
.8730
.9990
.9990
1.390
.9985
.9980
SOC KET
TD
D IA.
.1595
.1570
.840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
HL 48
Concentricity: “A” to “D” diameter within .010 FIR.
Non-lubed pinS must be used with lubed collar.
8. Use RL110 for oversize replacement.
MATERIAL:
HEAT TREAT:
FINISH:
HL48-( )-( )=
HL48BC-( )-( )=
Passivate per Hi-Shear Spec. 258 with blue paint on top
of head only and cetyl alcohol lube per Hi-Shear Sec 305.
HL48DL-( )-( )=
Solid film lube per MIL-L46010, Type I, and cetyl alcohol lube
HL48DS-( )-( )=
Solid film lubricant per “Lubeco” M390
HL48DU-( )-( )=
Solid film lube per MIL-L-46010, Type I.
3 HL48GU-( )-( )=
Silver plate per AMS 2410.
HL48K-( )-( )=
Solid film lubricant per “Lubeco” 905.
3 HL48PY-( )-( )=
Passivate per Hi-Shear Spec. 258
HL48TF-( )-( )=
Hi-Kote 2 solid film lube per Hi-Shear Spec 292.
HL48V-( )-( )=
Solid film lubricant per “Lubeco” 2123, Type II.
SPECIFICATION: Hi-Lok Product Specification 342.
G
REF.
.030
.035
.045
.055
.075
.095
.095
.125
.140
.200
.250
.300
H
R
RAD .
.060
.055
.074
.064
.090
.077
.112
.098
.140
.130
.160
.150
.188
.178
.210
.200
.238
.228
.335
.320
.385
.370
.435
.420
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
C HAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
1/16" x 45º
1/16" x 45º
1/16" x 45º
5/64" x 45º
5/64" x 45º
CODE:
THREAD
8-32UNJC -3A
Modi fi ed
10-32UNJF-3A
Modi fi ed
1/4-28UNJF-3A
Modi fi ed
5/16-24UNJF-3A
Modi fi ed
3/8-24UNJF-3A
Modi fi ed
7/16-20UNJF-3A
Modi fi ed
1/2-20UNJF-3A
Modi fi ed
9/16-18UNJF-3A
Modi fi ed
5/8-18UNJF-3A
Modi fi ed
3/4-16UNJF-3A
Modi fi ed
7/8-14UNJF-3A
Modi fi ed
1-12UNJF-3A
Modi fi ed
W
HEX.
T
D EPTH
Y
D IA.
.0801
.0701
.0806
.0701
.0967
.0947
.1295
.1270
1617
.1582
.1930
.1895
.2242
.2207
.255
.2520
.255
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.305
.400
.370
.520
.490
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.326
.306
.326
.306
.398
.378
.471
.451
.618
.598
D OUBLE
TENSION
SHEAR
POUND S
POUND S
MINIMUM
MINIMUM
7
4,010
2,180
5,380
3,180
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,000
37,300
25,000
47,200
32,400
58,300
41,000
83,900
59,500
114,000
81,500
149,000
100,000
HL48-8-8
Pin Part Number
HL48 86-8-8
Collar Part Number
Pin Part Number
DRAWN
Brlej
APPORVED
M.G.
REVISION
27
1-1301
DATE
4-2-63
DATE
4-2-63
DATE
D.P.S.
12-2-91
DRAWING NUMBER
HL48
D DIA.
FIRST
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/4
-28
7/8
-32
1
GENERAL NOTES: 1.
2.
3.
4.
5.
6.
7.
8.
A
DIA.
.3304
.3256
.3813
.3765
.5066
.5018
.6335
.6287
.7604
.7556
.8884
.8812
1.0139
1.0068
1.1408
1.1337
1.2739
1.2651
1.5308
1.5236
1.7845
1.7773
2.0405
2.0310
B
REF.
.312
.325
.395
.500
.645
.635
.685
.770
.825
1.050
1.210
1.390
WITHOUT
COATING OR
SOLID
FILM LUBE
.1635
.1630
.1895
.1890
.2495
.2490
.3120
.3115
.3745
.3740
.4370
.4365
.4995
.4990
.5615
.5610
.6240
.6235
.7490
.7485
.8740
.8735
.9990
.9985
6
SOCKET
WITH PLATING
OR SOLID
FILM LUBE
.1635
.1625
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.5615
.5605
.6240
.6230
.7490
.7460
.8740
.8730
.9990
.9980
TD
DIA.
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8880
.8610
.9930
.9860
F
.004
.005
.006
.007
.008
.009
.010
.010
.010
.012
.014
.014
H
.0700
.0080
.0805
.0785
.1079
.1059
.1349
.1329
.1619
.1599
.1894
.1864
.2158
.2128
.2430
.2400
.2720
.2690
.3280
.3260
.3820
.3700
.4370
.4330
HL 49
Non-lubed pins must be used with lubed collars.
Surface texture per ANSI B46.1.
Maximum “D” diameter may be increased by .0002 to allow for
solid film application.
11. Curved or bent edge manufacturer’s option.
MATERIAL:
HEAT TREAT:
FINISH:
HL49-( )-( )=
Passivate per Hi-Shear Spec. 258 and cetyl alcohol lubeper Hi-Shear Sec 305.
HL49BC-( )-( )=
Passivate per Hi-Shear Spec. 258 with blue paint on top of head only and cetyl
alcohol lube per Hi-Shear Sec 305.
HL49DL-( )-( )=
Solid film lube per MIL-L46010, Type I, and cetyl alcohol lube per Hi-Shear Sec 305.
HL49DS-( )-( )=
Solid film lubricant per “Lubeco” M390
HL49DU-( )-( )=
5 HL49GU-( )-( )=
Silver plate per AMS 2410.
HL49K-( )-( )=
Solid film lubricant per “Lubeco” 905.
HL49PB-( )-( )=
Cadmium plate per QQ-P-416, Type II, Class 2, and cetyl alcohol lube per HiShear Spec 305.
5 HL49PY-( )-( )=
Passivate per Hi-Shear Spec. 258
HL49TF-( )-( )=
Hi-Kote 2 solid film lube per Hi-Shear Spec 292.
HL49V-( )-( )=
Solid film lubricant per “Lubeco” 2123, Type II.
SPECIFICATION: Hi-Lok Product Specification 342.
2-1301
R
RAD.
.025
.015
.030
.020
.030
.020
.040
.030
.040
.030
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
.050
.040
Z
MAX.
S
CHAMFER
REF.
.015
1/32" x 45º
.015
1/32" x 45º
.015
1/32" x 45º
.015
3/64" x 45º
.015
3/64" x 45º
.022
3/64" x 45º
.022
3/64" x 45º
.025
1/16" x 45º
.025
1/16" x 45º
.025
1/16" x 45º
.025
5/64" x 45º
.025
5/64" x 45º
CODE:
W
HEX.
T
DEPTH
Y
DIA.
DOUBLE
SHEAR
POUNDS
MINIMUM
.0801
.0701
.0806
.0701
.0967
.0947
.1295
.1270
1617
.1582
.1930
.1895
.2242
.2207
.2555
.2520
.2555
.2520
.3185
.3150
.3820
.3780
.5100
.5040
.135
.115
.135
.115
.150
.130
.170
.160
.200
.180
.230
.210
.260
.240
.290
.270
.330
.305
.395
.305
.400
.370
.520
.490
9
4,010
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.326
.306
.398
.378
.471
.451
.618
.598
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
9/16-18UNJF-3A
Modified
5/8-18UNJF-3A
Modified
3/4-16UNJF-3A
Modified
7/8-14UNJF-3A
Modified
1-12UNJF-3A
Modified
TENSION
POUNDS
MINIMUM
2,180
5,380
3,180
9,300
5,820
14,600
9,200
21,000
14,000
28,600
18,000
37,300
25,000
47,200
32,400
58,300
41,000
83,900
59,500
114,000
81,500
149,000
100,000
HL49-8-8
Pin Part Number
HL49 86-8-8
Collar Part Number
Pin Part Number
DRAWN
DATE
Brlej
4-3-
APPORVED
DATE
M.C.
4-3-
REVISION
DATE
D.P.S.
12-2-93
C 1991, Hi-Shear
24
DRAWING NUMBER
HL49
REFER TO PRINT CATALOG FOR LICENSING AND PATENT INFORMATION
D ASH
NO.
-5
PIN
NOM.
DIA.
5/32"
8-32UNJC-3B
-6
3/16"
10-32UNJF-3B
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
THREAD
A
DIA.
B
DIA.
-18
9/16"
9/16-18UNJF-3B
.173
.166
.360
.200
.192
.462
.261
.252
.575
.325
.314
.690
.388
.376
.770
.450
.442
.872
.513
.501
NOTE: Use HL79-18
-20
3/8"
3/8-18UNJF-3B
NOTE: Use HL79-20
-24
3/4"
3/4-16UNJF-3B
NOTE: Use HL79-24
-28
7/8"
7/8-14UNJF-3B
NOTE: Use HL79-28
1"
1-12UNJF-3B
NOTE: Use HL79-32
-32
NOTES:
1.
2.
3.
MATERIAL:
HEAT TREAT:Collar
--
29 FINISH:
.292
.288
.307
.303
.412
.408
.518
.512
.628
.622
.713
.707
.815
.809
A1
DIA.
(REF.)
.337
L
L1
(REF.)
L2
(REF.)
L3
(REF.)
P
(REF.)
W
HEX
X
(REF.)
X1
(REF.)
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
.270
.300
.467
.344
.107
.137
.280
.310
.477
.344
.107
.137
1,600
25-35
.340
.370
.372
.380
.314
.302
.314
.302
.346
.332
.440
.425
.503
.488
.365
.550
.690
.675
UTS
LB S .
MIN.
1,400
.112
.142
3,000
60-80
.430
.460
.692
.484
.470
.500
.764
.557
.560
.590
.892
.624
.610
.640
.962
.763
TORQUE OFF
IN. LBS
15-25
.122
.152
5,000
130-160
.122
.152
7,000
200-240
.137
.167
9,500
270-330
.137
.167
12,500
370-430
Go thread gage penetration shall be 3/4 of one revolution minimum.
Dimensions apply after finish.
Collar -- 2024 aluminum alloy per QQ-A-430 or QQ-A-225/6.
Washer -- “NW” = 300 series stainless steel.
“TW” = 5052 aluminum alloy per QQ-A-250/8, or 2024 aluminum alloy per QQ-A-250/4 or QQ-A-250/S.
Age to T6 condition per MIL-H-6088.
Washer -- “NW” = None.
“TW” = Age to T6 condition per MIL-H-6088 (for 2024 only.)
Collar -- HL70 -( )
=Anodize per Spec. MIL-A-8625, dye color red, and cetyl alcohol lube
Hi-Shear Spec. 305
HL70CM-( ) =Chemical conversion coat per MIL-C-5541, Class 1A, and cetyl alcohol lube
per Hi-Shear Spec. 305
HL70D -( ) =Anodize per Spec. MIL-A-8625 and solid film lube per MIL-L-8937
HL70K -( ) =Anodize per Spec. MIL-A-8625 and solid film lube per “Lubeco” 905
HL70LZ -( ) =Anodize per Spec. MIL-A-8625, dye color red, and lauric acid lube per
Hi-Shear Spec. 305
HL70TT -( ) =Anodize per Spec. MIL-A-8625, dye color red, and translube
Collar &
Washer --
HL70DTW-( )=Collar finish is the same as HL70D-( ). Washer finish is anodize per Spec.
MIL-A-8625, dye color grey, or blue (for 2024 only).
HL70NW-( ) =Collar finish is the same as HL70-( ). Washer is passivated.
HL70TW-( ) =Collar finish is the same as HL70-( ). Washer finish is anodize per Spec.
MIL-A-8625, dye color grey, or blue (for 2024 only).
Dash number indicates nominal thread size in 1/32nds. See “Finish” note
for explanation of code leters
Example: HL70-S
=1/4-28 Hi-Lok collar only.
HL70TW-S
=1/4-28 Hi-Lok collar with aluminum washer.
Specification:
Code:
DATE
BY
DRAWN
7/27/60
VAN
APPROVED
7/27/60
MEC
29 REVISION
1/22/87
D.P.S
2-1501
Patented internationally. “Hi-Lock” and
“HL” are internationally registered
Trademarks of Hi-Shear Corporation
DRAWNING NUMBER
HL70
C 1987 Hi-Shear Corporation
D ASH
NO.
PIN
NOM.
D IA.
-5
5/32
8-32UNJC -3B
-6
3/16
10-32UNJF-3B
THREAD
-8
1/4
1/4-28UNJF-3B
-10
5/16
5/16-24UNJF-3B
-12
3/8
3/8-24UNJF-3B
-14
7/16
7/16-20UNJF-3B
-16
1/2
1/2-20UNJF-3B
-18
9/16
9/16-18UNJF-3B
NOTES:
A
D IA.
.365
.355
.365
.355
.475
.465
.620
.610
.790
.780
.895
.855
1.005
.995
1.125
1.115
1.
2.
3.
4.
5.
6.
B
.095
.085
.095
.085
.120
.110
.130
.120
.145
.135
.180
.170
.205
.195
.270
.260
C
D IA.
(REF.)
L
LENGTH
.255
.457
.427
.457
.427
.552
.552
.672
.642
.745
.715
.867
.837
.939
.909
1.065
1.035
.255
.333
.417
.490
.570
.648
.763
L1
(REF.)
M
(REF.)
W
HEX.
.346
.332
.346
.332
.346
.332
.440
.425
.503
.488
.753
.736
.878
.861
.878
.861
.275
.410
.380
.20
.410
.380
.20
.340
.500
.380
.26
.430
.607
.484
.34
.557
.38
.470
.667
.562
.762
.840
.45
.610
.832
.970
.51
.700
.950
.970
.71
X
(REF.)
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
.107
2,300
30-40
.107
2,750
40-50
.112
5,000
115-130
.122
8,300
200-250
.122
12,700
360-440
.137
19,000
550-625
.137
25,500
725-825
.145
32,400
950-1075
Go thread gage penetration shall be 3/4” of one revolution minimum.
For use on sloped surfaces up to 7” maximunm on standard and
1/64 oversize Hi-Lok tension head pins.
Non-lubed collars must be used with lube pins.
Use HL-375 for oversize replacement.
For -12, -14, -16 washers, chamfer of radius .040 - .060.
Collar Washer -
303 Se stainless steel per AMS5640 or ASMT-A582.
17-4PH stainless steel per AMS5643 or 17-4PH per AMS5528,
or PH15-7Mo per AMS5520.
HEAT TREAT:
Collar Washer -
None.
Age to H-1025 condition for 17-4PH, age to TH1050 condition
for 17-7PH and 15-7Mo per MIL-H-6875.
FINISH:
Collar -
HL75-( )A
= Cadmium plate per QQ-P-416, Type I, Class 2,
Sliver plate per AMS2410 and cetyl alcohol.
Solid film lube per “Lubeco” 905.
Cadmium plate per QQ-P-416, Type I, Class 2
Hi-Kote 2 solid film lube per Hi-Shear Spec. 292
Solid film lube per “Lubeco” 2123
HL75DU-( )A
HL75G - ( )A
HL75K - ( )A
HL75N - ( )A
HL75TF-( )A
HL75V - ( )A
=
=
=
=
=
=
HL75- ( )DW
HL75- ( )GW-
= Solid film lube per MIL-L-46010, Type I.
= Silver plate per AMS2410 and cetyl alcohol
= Solid film lube per “Lubeco” 905.
= Cadmium plate per QQ-P-416, Type II, Class 2.
= Cadmium plate per QQ-P-416, Type I, Class 2.
= Passivate per Hi-Shear Spec. 258
HL75- ( )KWHL75-(-)PBW
HL75-( )VW
HL75-( )W
HL75-( )WUSPECIFICATION:
R
SPHER.
RAD
.275
MATERIAL:
Washer-
P
(REF.)
Hi-Lok Product Specifications 345.
CODE:
EXAMPLE:
Dash number indicats nominal thread size in 1/32nds.
Code letter “A” following dash number indiactes Hi-Lok collar.
HL75-8AW
HL75K-8AKW
DATE
BY
DRAWN
3-16-60
RKL
APPROVED
3-16-60
MNS
= Assembly of HL75-8A collar and HL75-8W washer.
= Assembly of HL75K-8A collar and HL75-8KW washer.
“Hi-Lock” and“HL” are internationally
registered Trademarks of Hi-Shear Corporation
DRAWNING NUMBER
HL75
SELF-ALIGNING COLLAR ASSEMBLY
303 STAINLESS STEEL
39 REVISION
2-1501
8-792
D.P.S
1/16” GRIP VARIATION - TENSION APPLICATIION
ECN 31512
D ASH
NO.
PIN
NOM.
DIA.
-5
5/32"
A
DIA.
THREAD
.292
.288
.307
.303
.412
.408
.518
.512
.628
.622
.713
.707
.815
.809
8-32UNJC-3B
-6
3/16"
10-32UNJF-3B
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
NOTES:
A1
DIA.
(REF.)
.340
.360
.465
.575
.690
.770
.875
B
DIA.
L
.173
.166
.200
.192
.261
.252
.325
.314
.388
.376
.450
.442
.513
.501
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
L1
(REF.)
L2
(REF.)
L3
(REF.)
P
(REF.)
.270
.467
.300
.344
.280
.477
.310
.344
.340
.572
.370
.380
.430
.692
.460
.484
.470
.764
.500
.557
.560
.882
.590
.624
.610
.962
.640
.763
1.
2.
3.
Go thread gage penetration shall be 3/4 of one revelution minimum.
W
HEX
MATERIAL:
Collar Washer -
2024 aluminum alloy per QQ-A-430 or QQ-A-225/6.
“DW” & “TW”
= 5052 aluminum alloy per QQ-A-250/8, or
2024 aluminum alloy per QQ-A-250/4 or QQ-A-250/5.
“NW” & “TY”
= 300 series stainless steel.
27
HEAT TREAT:
Collar Washer -
Age to T6 condition per MIL-H-6088
“DW” & “TW”
= Age to T6 condition per MIL-H-6088 (for 2024 only.)
“NW” & “TY”
= None.
27
FINISH:
Collar -
HL77-( )
=
=
X1
(REF.)
TENSION
PRELOAD
LB S .
MIN.
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
.107
.137
350
1,400
10-20
.107
.137
500
1,600
20-30
.112
.142
1,000
3,000
55-70
.314
.302
.314
.302
.346
.332
.440
.425
.503
.488
.565
.550
.690
.675
27
HL77CM-( )
X
(REF.)
.122
.152
1,650
5,000
100-125
.122
.152
2,300
7,000
170-200
3,100
9,500
220-270
4,100
12,500
310-370
.137
.137
.167
.167
Anondize per MIL-A-8625, dye color brown, and cetyl alcohol
Chemical conversion coat per MIL-C-5541, Class 1A, and
HL77 - ( )D or
HL77 - ( )DA = Annodize per MIL-A-8625, and solid film lube per MIL-L-8937.
HL77TF -( )
= Annodize per MIL-A-8625, and Hi-Kote 2 solid film lube per
Hi-Shear Spec. 292.
HL77TT-( )
= Anodize per Spec. MIL-A-8625, dye color brown, and translube.
Collar &
Washer-
SPECIFICATION:
HL77-( )DDW or
HL77-( )DADW = Collar finish is the same as HL77- ( )D or DA. Washer finish is
HL77- ( )TW- = Collar finish is the same as HL77- ( ). Washer finish is anodize
per Spec. MIL-A-8625, dye color grey, or blue (for 2024 only).
HL77- ( )TY- = Collar finish is the same as HL77- ( ). Washer finish is “Kalgard”
FC-2 teflon.
HL77TF-( )NW= Collar finish is the same as HL77TF- ( ). Washer is passsivated.
Hi-Lok Product Specifications 345, except tension preload as tabulated.
CODE:
Dash number indicates nominal thread size in 1/32nds.
See the “Finish” note for explanation of code letters.
EXAMPLE:
HL77-8
= 1/4 -28 collar only, anodize and cetyl alcohol lube.
HL77-8DADW = Assembly of HL77-8DA collar and HL77-8DW washer with solid film lube.
DATE
BY
DRAWN
12-19-61
R.K.C.
APPROVED
12-19-61
M.M.S.
DRAWNING NUMBER
2024-T6 ALUMINUM ALLOY
HL77
1/16” GRIP VARIATION-SHEAR APPLICATION
27 REVISION
2-1501
3-3-87
D.P.S.
FOR USE ON STANDARD SIZE ALUMINUM ALLOY HI-LOK PINS
D ASH
NO.
PIN
NOM.
DIA.
-5
5/32"
A
DIA.
THREAD
B
DIA.
NOTE:
-6
13/64"
10-32UNJF-3B
-8
17/64"
1/4-28UNJF-3B
-10
21/64"
5/16-24UNJF-3B
-12
25/64"
3/8-24UNJF-3B
-14
29/64"
7/16-20UNJF-3B
-16
33/64"
1/2-20UNJF-3B
-18
37/64"
9/16-18UNJF-3B
-20
41/64"
5/8-18UNJF-3B
-24
49/64"
3/4-16UNJF-3B
-28
57/64"
7/8-14UNJF-3B
-32
1-1/64"
1-12UNJF-3B
.322
.318
.422
.418
.538
.532
.649
.642
.743
.737
.865
.855
.880
.870
1.005
.995
1.105
1.095
1.295
1.285
1.475
1.465
.212
.208
.272
.268
.336
.330
.398
.392
.463
.457
.528
.522
.598
.592
.661
.655
.786
.780
.911
.905
1.036
1.030
L
LENGTH
P
(REF.)
W
HEX
X
(REF.)
UTS
LB S .
MIN.
.107
1,600
25-35
.112
3,000
60-80
.122
5,000
130-160
.122
7,000
200-240
.137
9,500
270-330
.137
12,500
370-430
TORQUE OFF
IN. LBS
For -5 diameter pin, use HL70-5.
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
1.029
1.009
1.123
1.103
1.371
1.351
1.575
1.545
1.840
1.810
27 NOTES:
1.
2.
3.
4.
5.
MATERIAL:
2024 aluminum alloy per QQ-A-430 or QQ-A-225/6
HEAT TREAT:
27 FINISH:
HL79-( )
.280
.380
.340
.484
.430
.484
.470
.557
.565
.624
.615
.763
.670
.970
.735
1.120
.940
1.240
1.060
1.450
1.225
1.650
.346
.332
.440
.425
.440
.425
.503
.488
.565
.550
.690
.675
.878
.861
1.003
.986
1.128
1.110
1.315
1.292
1.504
1.480
.145
14,500
500-575
.145
18,000
625-700
.156
27,500
900-1000
.169
37,500
1200-1325
.186
50,000
1450-1600
Automatic feed tooling for -6 and -8 sizes only.
Power tooling not available for installing 7/8” and 1” sizes.
HL79D-( )
HL79GG -( )
HL79LZ -( )
HL79TT-( )
= Anodize per MIL-A-8625, dye color red, and cetyl
= Anodize per MIL-A-8625 and solid film lube per
MIL-L-46010, Type I.
= Anodize per MIL-A-8625, dye color green, and cetyl
= Annodize per MIL-A-8625, dye color red, and lauric
acid lube per Hi Shear Spec. 305.
= Anodize per Spec. MIL-A-8625, dye color red, and translube.
SPECIFICATION:
27 CODE:
See finish note for explanation of code letters.
27
HL79-8
EXAMPLE:
L1
(REF.)
= 1/4 -28 Hi-Lok collar with anodize and cetyl alcohol lube.
DATE
BY
DRAWN
11-31-60
R.K.L.
APPROVED
11-31-60
M.C.
DRAWNING NUMBER
2024-T6 ALUMINUM ALLOY
HL79
27 REVISION
2-1501
8-13-90
D.P.S.
FOR USE ON STANDARD AND 1/64” OVERSIZE HI-LOK PINS
PIN
D ASH
NOM.
NO.
D IA.
-5
5/32"
THREAD
8-32UNJC -3B
-6
3/16"
10-32UNJF-3B
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
-18
9/16"
9/16-18UNJF-3B
-20
3/8"
3/8-18UNJF-3B
-24
3/4"
3/4-16UNJF-3B
-28
7/8"
7/8-14UNJF-3B
-32
1"
1-12UNJF-3B
A
D IA.
.287
.283
.307
.303
.412
.408
.518
.512
.628
.622
.733
.727
.848
.842
.915
.905
.995
.985
1.120
1.110
1.345
1.335
1.490
1.480
A1
D IA.
(REF.)
.320
.340
.442
.552
.665
.765
.880
.940
1.040
1.140
1.365
1.510
B
D IA.
.173
.166
.200
.192
.261
.252
.325
.314
.388
.376
.450
.442
.513
.501
.598
.570
.661
.634
.786
.762
.911
.887
1.036
1.015
L
L1
L2
(REF.) (REF.)
.447
.265
.427
.457
.275
.437
.552
.340
.532
.672
.430
.652
.744
.475
.724
.862
.560
.842
.942
.610
.922
1.029
.670
1.009
1.123
.735
1.103
1.371
.940
1.351
1.575
1.060
1545
1.840
1.225
1.810
.280
L3
(REF.)
P
(REF.)
.460
.344
.290
.470
.344
.355
.565
.380
.445
.685
.484
.490
.755
.557
.575
.875
.840
.625
.955
.970
.685
1.042
.970
.750
1.136
1.120
.955
1.384
1.240
1.075
1.584
1.520
1.240
1.849
1.650
W
HEX
.314
.302
.314
.302
.346
.332
.440
.425
.503
.488
.753
.736
.878
.861
.878
.861
1.003
.986
1.128
1.110
1.380
1.356
1.504
1.480
X
(REF.)
X1
(REF.)
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
.107
.120
2,300
30-40
.107
.120
2,750
40-50
.112
.125
5,000
115-130
.122
.135
8,300
200-250
.122
.135
12,700
360-420
.137
.150
19,000
525-675
.137
.150
25,500
725-1000
.145
.158
29,000
1000-1100
.145
.158
32,000
1350-1500
.156
.169
42,000
1900-2200
.169
.182
62,000
3200-3600
.186
.199
84,000
4500-5000
NOTES:
1.
2.
3.
4.
Use HL73 or HL273 for higher tension application.
44 MATERIAL:
Collar 303 Se Stainless per ASTM A-582 (AMS5640). Steel Washer - 300 series stainless steel (.010 thick).
Aluminum Washer - 2024 T-6 aluminum alloy (.020 thcik) per QQ-A-250/4 or QQ-A-250/5 (sizes -5 through -12 only).
44 FINISH:
HL86-( )
HL86W - ( )
= Collar only with cadmium plate per QQ-P-416, Type I, Class 2, and cetyl alcohol lube per Hi-Shear Spec. 305.
= Collar with cadmium plate per QQ-P-416, Type I, Class 2, and cetyl alcohol lube per Hi-Shear Spec. 305.
Steel Washer with Cadmium plate per QQ-P-416, Type I, Class 2, and no lube.
HL86CNNW-( ) = Diffused nickel-cadmium plating per Spec. AMS2416, and cetyl alcohol lube per Hi-Shear Spec. 305 and
steel washer finish is passivate.
HL86D-( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2, and solid film lubricant per MIL-L-46010, Type I.
HL86DU -( )
= Collar only with solid film lube per MIL-L-46010, Type I.
HL86DUW -( ) = Collar with solid film lube per MIL-L-46010, Type I, and steel washer with cadmium plate per QQ-P-416.
Type II, Class, and no lube.
HL86G-( )
= Collar only with silver plate AMS-2410 and cetyl alcohol lube per Hi-Shear Spec. 305.
HL86GGW-( )
= Collar and steel washer both with silver plate per AMS2410 and cetyl alcohol lube per Hi-Shear Spec. 305.
HL86GNW-( )
= Silver plate per Spec. AMS2410 and cetyl alcohl lube per Hi-Shear SPec. 305 and steel washer finish
is passivate.
HL86K -( )
= Collar only with solid film lube per “Lubeco” 905 (recommended for the use of HL32 and HL33 only.)
HL86KP-( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2, color violet to purple, and cetyl
HL86KPW-( )
= Collar with cadmium plate per QQ-P-416, Type II, Class 2, color violet to purple, and cetyl
alcohol lube per Hi-Shear Spec. 305. Steel washer with cadmium plate per QQ-P-416, Type II, Class 2 and no lube.
HL86PB-( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2, and cetyl alcohol lube per Hi-Shear Spec. 305.
HL86PBW-( )
= Collar with cadmium plate per QQ-P-416, Type II, Class 2, and cetyl alcohol lube per Hi-Shear Spec. 305.
Steel washer with cadmium plate per QQ-P-416, Type II, Class 2 and no lube.
HL86TB - ( )
= Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292, and cetyl alcohol per Hi-Shear. 305.
HL86TF - ( )
= Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
HL86TW - ( )
= Collar with cadmium plate per QQ-P-416, Type I, Class 2, and cetyl alcohol lube per Hi-Shear Spec. 305.
Aluminum washer anodize per MIL-A-8625, dye color blue (sizes -5 through -12 only).
SPECIFICATION:
CODE:
Dash number indicates nominal thread size in 1/32nds. See the finish note for explanation of code letters.
EXAMPLE:
HL86W-8
HL86TW-8
DATE
BY
DRAWN
7/29/60
VAN
APPROVED
8/6/63
MEC
= 1/4 -28 collar with steel washer.
= 1/4-28 Hi-Lok collar with aluminum washer.
registered trademarks of Hi-Shear Corporation.
DRAWNING NUMBER
TYPE 303 Se STAINLESS STEEL
HL86
A/16” GRIP VARIATION
44 REVISION
2-1501
10/7/91
D.P.S
TENSION APPLICATION
D ASH
NO.
PIN
NOM.
D IA.
-5
5/32"
8-32UNJC -3B
-6
13/64"
10-32UNJF-3B
THREAD
-8
17/64"
1/4-28UNJF-3B
-10
21/64"
5/16-24UNJF-3B
-12
25/64"
3/8-24UNJF-3B
-14
29/64"
7/16-20UNJF-3B
-16
33/64"
1/2-20UNJF-3B
-18
37/64"
9/16-18UNJF-3B
-20
41/64"
5/8-18UNJF-3B
-24
49/64"
3/4-16UNJF-3B
-28
57/64"
7/8-14UNJF-3B
-32
1-1/64"
1-12UNJF-3B
NOTES:
A
D IA.
.292
.288
.322
.318
.422
.418
.538
.532
.649
.642
.740
.730
.860
.850
.915
.905
.995
.985
1.120
1.110
1.345
1.335
1.490
1.480
A1
D IA.
(REF.)
.320
.355
.455
.570
.685
.775
.895
.950
1.050
1.150
1.380
1.530
1.
2.
3.
Collar Washer -
MATERIAL:
FINISH:
Collar -
B
D IA.
.173
.166
.212
.208
.272
.268
.336
.330
.398
.392
.463
.457
.528
.522
.598
.592
.661
.655
.786
.780
.911
.905
1.036
1.030
L
L1
LENGTH (REF.)
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
1.029
1.009
1.123
1.103
1.371
1.351
1.571
1.551
1.836
1.815
HL94-( )
HL94TB - ( )
HL94TF-( )
HL94V - ( )
SPECIFICATION:
CODE:
EXAMPLE:
L3
(REF.)
P
(REF.)
.270
.285
.460
.344
.280
.295
.470
.380
.340
.355
.565
.484
.430
.445
.685
.484
.470
.485
.755
.557
.560
.575
.875
.840
.610
.625
.955
.970
1.042
.670
.685
.970
.735
.750
1.136
1.120
.940
.955
1.384
1.240
1.060
1.075
1.584
1.520
1.225
1.240
1.849
1.650
W
HEX
.314
.302
.346
.332
.440
.425
.440
.425
.503
.488
.753
.736
.878
.861
.878
.861
1.003
.986
1.128
1.110
1.380
1.356
1.504
1.480
X
(REF.)
X1
(REF.)
UTS
LB S .
MIN.
.107
.120
2,300
15-25
.107
.120
2,750
25-35
TORQUE OFF
IN. LBS
.112
.125
5,000
60-80
.122
.135
8,300
130-160
.122
.135
12,700
200-240
.137
.150
19,000
270-330
.137
.150
25,500
370-430
.145
.158
29,000
500-575
.145
.158
32,000
625-750
.156
.169
42,000
900-1000
.169
.182
62,000
1200-1325
.186
.199
84,000
1450-1600
Type 303 Se stainless steel per QQ-P-416 or AMS5640.
300 series stainless steel.
HL94DU-( )
HL94G - ( )
HL94K - ( )
HL94LP - ( )
HL94PK - ( )
Collar &
Washer-
L2
(REF.)
Silver plate per AMS2410 and cetyl alcohol lube per Hi-Shear Spec.305.
Solid film lube per “Lubeco” 905.
Cadmium plate per QQ-P-416 (olive drab color), Type II, Class 2,
= Hi-Kote 2 solid film lube per Hi-Shear Spec. 292, and cetyl alcohol lube
per Hi-Shear Spec. 305.
= Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
=
=
=
=
=
HL94W- ( )
= Collar finish same as HL94-( ), and washer with cadmium plate per
QQ-P-416, Type I, Class 2.
HL94DUW- ( ) = Collar and washer both with solid film lube per MIL-L-46010, Type I.
HL94GW- ( ) = Collar and washer both with silver plate per AMS2410 and cetyl alcohol
HL94GNW-( ) = Collar finish same as HL94G-( ), and washer passivated per
Hi-Shear Spec. 258.
HL94GVW-( ) = Collar finish same as HL94G-( ), and washer with solid film lube
per “Lubeco” 2123.
Dash number indicats nominal thread size in 1/32nds.
See finish note for explanation of code letters.
HL94K-8 = 1/4-28 Hi-Lok collar; finish is Lubeco 905.
“Hi-Lock” and“HL” are
internationally registered
DATE
BY
DRAWN
5-15-63
BRLEJ
APPROVED
5-16-63
M.C.
DRAWNING NUMBER
HL94
Type 303 Se STAINLESS STEEL
1/16 GRIP VARIATION - SHEAR APPLICATION
28 REVISION
2-1501
2-4-92
D.P.S.
FOR USE ON STANDARD AND 1/64” OVERSIZE HI-LOK PINS
ECN 30642
D ASH
NO.
PIN
NOM.
D IA.
-4
?
A
D IA.
A1
D IA.
(REF.)
6-32UNJC -3B
.240
.235
THREAD
B
D IA.
L
LENGTH
L1
(REF.)
L2
(REF.)
L3
(REF.)
P
(REF.)
W
HEX
.270
.147
.143
.420
.400
.250
.265
.435
.344
.314
.302
.320
.173
.166
.447
.427
.265
.280
.460
.344
.314
.302
X1
(REF.)
UTS
LB S .
MIN.
.107
.120
1.350
10-20
.107
.120
1.940
15-25
X
(REF.)
TORQUE OFF
IN. LBS
-5
5/32"
8-32UNJC -3B
.287
.283
-6
3/16"
10-32UNJF-3B
.307
.303
.340
.200
.195
.457
.437
.275
.290
.470
.344
.314
.302
.107
.120
2.500
25-35
-8
1/4"
1/4-28UNJF-3B
.412
.408
.442
.261
.252
.552
.532
.340
.355
.565
.484
.440
.425
.112
.125
4.800
60-80
-10
5/16"
5/16-24UNJF-3B
.518
.512
.552
.325
.319
.672
.652
.430
.445
.685
.624
.565
.550
.122
.135
6.800
130-160
.665
.388
.381
.744
.724
.475
.490
.755
.715
.628
.613
.122
.135
8.700
200-240
-12
3/8"
3/8-24UNJF-3B
.620
.614
-14
7/16"
7/16-20UNJF-3B
.733
.727
.765
.450
.442
.862
.842
.560
.575
.875
.840
.753
.736
.137
.150
12.100
270-330
-16
1/2"
1/2-20UNJF-3B
.848
.842
.880
.521
.507
.942
.922
.610
.625
.955
.970
.878
.861
.137
.150
15.800
370-?
1.029
1.009
500-575
-18
9/16"
9/16-18UNJF-3B
.915
.905
.940
.576
.570
.670
.685
1.042
1.045
.941
.924
.145
.158
20.300
-20
3/8"
3/8-18UNJF-3B
.995
.985
1.020
.640
.634
1.123
1.103
.735
.750
1.136
1.120
1.003
.986
.145
.158
25.700
625-700
-24
3/4"
3/4-16UNJF-3B
1.120
1.110
1.190
.770
.762
1.371
1.351
.940
.960
1.485
1.240
1.128
1.110
.156
.170
37.300
900-1000
-28
7/8"
7/8-14UNJF-3B
1.345
1.335
1.365
.895
.887
1.575
1545
1.060
1.080
1.595
1.520
1.380
1.356
.169
.182
50.900
1200-1325
1-12UNJF-3B
1.490
1.480
1.525
1.025
1.015
1.840
1.810
1.650
1.504
1.480
.186
.200
67.000
1450-1600
-32
1"
NOTES:
FINISH:
SPECIFICATION:
CODE:
EXAMPLE:
DRAWN
8-8-60
APPROVED
8-13-60
1.245
1.850
A-286 high temperature alloy per AMS5731, AMS5743, or AMS5736.
Type 300 series stainless steel.
= Collar only with silver plate per AMS2410 and cetyl alcohol lube per Hi-Shear Spec. 305.
= Collar only with solid film lube per MIL-L-9937 plus green identification of body of collar.
= Collar only with solid film lube per MIL-L-9937 plus yellow MIL-P-23377 identification of body of collar.
= Collar with solid film lube per MIL-L-9937 plus yellow MIL-L-23377 identification of body
of collar. Washer with Cadmium plate per QQ-P-416, Type II, Class 2.
HL97? - ( )
= Collar with solid film lube per MIL-L-9937 plus yellow MIL-P-23377 identification of body
of collar. Washer with passivate per Hi-Shear Spec. 258.
HL97? - ( )
= Collar only with “Everlube” 620 solid film lube.
HL97? - ( )
= Collar only with solid film lube per “Lubeco” 905.
HL97? - ( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2, color green, and cetyl alcohol
HL97? - ( )
= Collar only with green cadmium plate per QQ-P-416, Type II, Class 2, color green, and cetyl alcohol
Washer with passivate per Hi-Shear Spec. 258.
HL97? - ( )
= Collar with solid film lube per “Lubeco” 905. Washer with passivate per Hi-Shear Spec. 258.
HL97? - ( )
= Collar only with solid film lube per MIL-L-46010.
HL97? - ( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2 and cetyl alcohol lube
HL97? - ( )
= Collar only with cadmium plate per QQ-P-416, Type II, Class 2 and cetyl alcohol lube
Washer with passivate per Hi-Shear Spec. 258.
HL97? - ( )
= Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292, and cetyl alcohol lube per
Hi-Shear Spec. 305.
HL97? - ( )
= Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292
HL97? - ( )
= Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292. Washer with passivate per
Hi-Shear Spec. 258.
HL97? - ( )
= Collar only silver plate and cetyl alcohol lube. Washer with passivate per Hi-Shear Spec. 258.
HL97? - ( )
= Collar only with solid film lube per “Lubeco” 2123.
HL97? - ( )
= Collar and washer both with “Lubeco” 2123 solid film lube.
Dash number indicats nominal thread size in 1/32nds. See finish note for explanation of code letters.
HL97TFW = Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292, and passivated washer.
MATERIAL:
DATE
1.225
1.
2.
3.
Collar Washer HL97 - ( )
HL97? - ( )
HL97? - ( )
HL97? - ( )
DRAWNING NUMBER
BY
VAN
CESSNA
HL97
1/16” GRIP VARIATION - SHEAR APPLICATION
34 REVISION
2-1501
3-20-90
D.P.S.
PIN
D ASH
NOM.
NO.
D IA.
-5
THREAD
5/32"
8-32UNJC -3B
-6
13/64"
10-32UNJF-3B
-8
17/64"
1/4-28UNJF-3B
-10
21/64"
5/16-24UNJF-3B
-12
25/64"
3/8-24UNJF-3B
-14
29/64"
7/16-20UNJF-3B
-16
33/64"
1/2-20UNJF-3B
-18
37/64"
9/16-18UNJF-3B
-20
41/64"
3/8-18UNJF-3B
-24
49/64"
3/4-16UNJF-3B
A
D IA.
A1
D IA.
(REF.)
.287
.283
.307
.303
.412
.408
.518
.512
.628
.622
.733
.727
.848
.842
.915
.905
.995
.985
1.120
1.110
.320
.340
.442
.552
.665
.775
.895
.910
1.040
1.140
NOTES:
B
D IA.
L
.173
.169
.212
.208
.272
.268
.336
.330
.398
.392
.463
.457
.528
.522
.598
.592
.661
.655
.786
.780
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
1.029
1.009
1.123
1.103
1.371
1.351
L1
L2
(REF.) (REF.)
.265
.280
L3
(REF.)
P
(REF.)
.460
.344
.275
.290
.470
.344
.340
.355
.565
.380
.430
.445
.685
.484
.475
.490
.755
.557
.560
.575
.875
.840
.610
.625
.955
.970
.670
.685
1.042
.970
.735
.750
1.136
1.120
.940
.955
1.384
1.240
W
HEX
.314
.302
.314
.302
.346
.332
.440
.425
.503
.488
.753
.736
.878
.861
.941
.924
1.003
.986
1.128
1.110
X
(REF.)
X1
(REF.)
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
.107
.120
2,300
25-35
.107
.120
2,750
30-40
.112
.125
5,000
80-95
.122
.135
8,300
150-200
.122
.135
12,700
260-360
.137
.150
19,00
390-480
.137
.150
25,500
640-800
.145
.158
29,000
740-900
.145
.158
32,000
800-1000
.156
.169
42,000
1300-1650
1.Go thread gage penetration shall be 3/4 of one revolution minimum.
2. Dimensions apply after finish.
3. This collar for use in special enviornments; to be lubricated with
compatible materials by user.
MATERIAL:
Collar-303 Se stainless steel per ASTM A-582 (AMS5640).
Washer-300 series stainless steel.
4 FINISH:
HL1187-( ) =
Collar only with cadmium plate per QQ-P-416, Type II,
HL1187DU-( ) =
Collar only with solid film lube per MIL-L-46010, Type I.
HL1187DUW-( ) = Collar with solid film lube per MIL-L-46010, Type I and washer
with cadmium plate per QQ-P-416, Type II, Class 2, no lube.
3
HL1187GU-( ) = Collar only with silver plate per AMS2410, no lube.
3
HL1187N-( ) =
Collar only with cadmium plate per QQ-P-416, type II. class 2, no lube.
HL1187TF-( ) = Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292.
HL1187YL-( ) = Collar only with Hi-Kote 2 solid film lube per Hi-Shear Spec. 292,
and yellow MIL-P-23377 identification on body of collar.
Specification:
Code:
EXAMPLE:
HL1187-8 =
1/4-28 Hi-Lok collar with cadmium plate per QQ-P-416, Type II,
registeredTrademarks of Hi-Shear Corporation.
DATE
BY
DRAWN
4-21-81
D.P.S.
APPROVED
4-21-81
DRAWING NUMBER
HL1187
1/16” GRIP VARIATION- TENSION APPLICATION
4 REVISION
2-1501
7-31-91
D.P.S.
FOR USE ON 1/64” OVERSIZE HI-LOK PINS
ECN 30630
increased fatigue
life hi-speed installation
l
The Hi-LokR/Hi-TigueR
fastening system is a combination of proven per
formance features. To the accepted features of the
Hi-Lok system are added the improved qualities
of the unique Hi-Tigue bead design.
The established Hi-Lok system has become
practically the standard fastening system through
out much of the aerospace industry. It is used
wherever structural assembly operations demand
controlled preload, automatic torque control,
self-locking, together with low installation costs
and high-speed production tooling. The addition
of the Hi-Tigue design feature—a subtle bead on
the end of the shank—dramaticaliy increases the
total fatigue life and overall performance of the
fastened structure through controlled interference
fit.
The Hi-Tigue pin is installed into a straight
hole with standard drills using conventional tech
niques. During installation, as the Hi-Tigue pin is
driven into the hole, a small amount of plastic
deformation of the hole surface takes place. This
"controlled interference" produces a cold-worked
hole that is correctly sized and has a burnished
surface. The gentle radius of the bead is the only
working surface during this entry phase. Overall,
the multiple features gained from the interference
fit Hi-Tigue system produces a dramatic increase
in aircraft structural fatigue life. The same type of
self-locking Hi-Lok collar that has been used for
years on virtually every airframe program is used
with the Hi-Lok/Hi-Torque concept.
c COPYRIGHT FAIRCHILD AEROSPACE FASTENER DIVISION 1993
Hi-Tigue pins are installed by pressing them into
the interference-fit hole by standard methods. A
straight push action accomplishes this either
with fully automatic machines of the Gemcor Drive
matic type, or with hand rivet guns and bucking
bars. The collar is installed with standard tooling,
and the automatic breakoff of the hex wrench
portion produces controlled preload over the
entire grip range. This controlled breakoff assures
proper installation torque, eliminating the need
for torque inspection. Hi-Lok/Hi-Tigue collars are
available in a variety of configurations and
materials for tension and shear applications.
As many as 40 collars per minute may be
installed with the high-speed tooling. Further, an
extensive selection of tool adaptors, including
offset type, extended offset, back drive, angle and
ratchet tools permit the installation of Hi-Lok/
Hi-Tigue fasteners in areas that would be inaccessible to other fastening systems. Simple hole
preparation, accomplished with standard drills and
countersinks, result in additional cost savings.
Standard hand drilling techniques may be applied
to complement the high-speed automatic drilling
equipment normally used in many assembly areas.
Voi-Shan's Hi-Lok/Hi-Tigue system in operation
enables the airframe manufacturer to establish
fatigue values that exceed those previously considered obtainable from other fastening concepts.
Keeping pace with advancements in airframe design, the versatile performance of the Hi-Lok
system, in combination with the Hi-Tigue features,
produces an improvement in the state of the art—
to match new aircraft technology.
Hi-LokR /Hi-TiqueR are registered trademarks of Hi-Shear Corporation.
INSTALLATION
SEQUENCE
An exceptional feature of this fastening system is its ease of installation. First, the pin is inserted into the prepared hole,
the collar is threaded on to the pin and then driven by the installation tooling.
1
The installation of the Hi-Lok fastener is completed on
one side of the assembly after the pin has been
inserted through the hole from the other side.
3
Progessive tightening takes place as torque is applied.
2
4
The hex wrench tip of the power driver is
placed over the hex of the collar.
At the designed torque level, built into the
Hi-Tigue collar, the hex portion of the collar
is sheared off automatically by the driving
tool.
HOLE PREPARATION
Hole preparation should conform with HS 299 or individual company specifications.
TECHNICAL INFORMATION
MATERIAL SELECTION
PIN
COLLAR
alloy steel
titanium
H-11
aluminum
stainless steel
PLATING AND FINISHES
SEE STANDARD DRAWING FOR FINISH CODE APPLICABLE
FOR A GIVEN DRAWING OR MATERIALS
DIAMETERS
5/32” TO 1”
GRIP LENGTHS
1/8” TO 3” IN 1/16” INCREMENTS
FLUSH HEAD
HEAD STYLES
PROTRUDING HEAD
SHEAR
SHEAR
TENSION
TENSION
ADDITIONAL TECHNICAL INFORMATION, STANDARD PAGES, AND TOOLING DATA
ARE AVAILABLE FROM THE VOI-SHAN SALES SERVICE STAFF.
D DIA.
FIRST
NOM.
D ASH
DIA.
NO.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.565
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.545
.635
.685
WITHOUT
SOLID
FILM
LUBE
.1695
.1690
.1955
.1950
.2555
.2550
.3180
.3175
.3805
.3800
.4430
.4425
.5055
.5050
SOCKET
WITH
SOLID
FILM
LUBE
.1695
.1685
.1955
.1945
.2555
.2545
.3180
.3170
.3805
.3795
.4430
.4420
.5055
.5045
TD
DIA.
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
REF.
.020
.025
.030
.035
.040
.045
.050
H
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
S
CHAMFER
REF.
1/32" x 37º
1/32" x 37º
1/32" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
CODE:
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
SPECIFICATION:
4. Hole preparation per NAS616 (Column “B”) for interference application.
5. Use HL T110 for oversize replacement.
6. Install per Hi-Shear Spec. 289
7. Minimum required for head and Hi-Tigue feature.
95,000 psi shear minimum.
HLT10-( )-( )= Cetyl alcohol lube per Hi-Shear Spec. 305.
HLT10AP-( )-( )= Hi-Kote 1 per Hi-Shear Spec. 294, and cetyl alcohol
lube per Hi-Shear Spec. 305
HLT10TB-( )-( )= Hi-Kote 2 , and cetyl alcohol lube per Hi-Shear Spec. 305.
Hi-Lok Hi-Tigue Product Specification 342.
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
W
HEX.
T
DEPTH
Y
DIA.
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
9 .100
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
269
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
DOUBLE
SHEAR
POUNDS
MINIMUM
7
TENSION
POUNDS
MINIMUM
MIN
GRIP
LENGTH
4,210
1,940
-2
5,550
2,500
-2
9,620
4,300
-2
14,890
6,300
-2
21,430
8,700
-3
29,000
12,100
-4
37,900
15,300
-4
HLT10-8-8
Pin Part Number
HLT10
HLT1070-8-8
Collar Part Number
Pin Part Number
U.S. patents 3,138,987;3,390,906; 3,578,367and foreign
patents. “Hi-Lok” and “HL” are internationally
DRAWN
DATE
VAN
8-28-68
APPORVED
DATE
R.TING 7-25-68
REVISION
9
2-1397
DATE
D.P.S.
10-29-81
C 1981, Hi-Shear
hi-tigue
R
PIN
TITANIUM
DRAWING NUMBER
HLT10
D DIA.
FIRST
NOM.
D ASH
DIA.
NO.
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
SPECIFICATION:
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.322
.306
.377
.357
.440
.415
.505
.475
.600
.565
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.645
.635
.685
WITHOUT
SOLID
FILM
LUBE
.1695
.1690
.1955
.1950
.2555
.2550
.3180
.3175
.3805
.3800
.4430
.4425
.5055
.5050
6
SOCKET
WITH
SOLID
FILM
LUBE
.1695
.1685
.1955
.1945
.2555
.2545
.3180
.3170
.3805
.3795
.4430
.4420
.5055
.5045
TD
DIA.
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
REF.
.030
.035
.045
.055
.075
.095
.095
H
.060
.055
.074
.064
.090
.080
.112
.102
.140
.130
.160
.150
.188
.178
4. Hole preparation per NAS616 (Column “B”) for interference application.
6Al-4V titanium alloy per Spec. AMS4928 or AMS4967
160,000 psi tensile minimum (95,00 psi shear minimum) 95,000 psi shear minimum.
HLT12-( )-( )= Cetyl alcohol lube per Hi-Shear Spec. 305.
HLT12AP-( )-( )= Hi-Kote 1 per Hi-Shear Spec. 294, and cetyl alcohol
lube per Hi-Shear Spec. 305
HLT12TB-( )-( )= Hi-Kote 2 , and cetyl alcohol lube per Hi-Shear Spec. 305.
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
S
CHAMFER
REF.
1/32" x 37º
1/32" x 37º
1/32" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
3/64" x 37º
THREAD
W
HEX.
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
T
DEPTH
Y
DIA.
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
9
DOUBLE
SHEAR
POUNDS
MINIMUM
7
TENSION
POUNDS
MINIMUM
MIN
GRIP
LENGTH
4,210
2,180
-2
5,550
2,750
-2
9,620
5,820
-2
14,890
9,200
-2
-3
21,430
14,000
29,000
18,000
-4
37,900
25,500
-4
DRAWN
DATE
VAN
7-1-68
HLT12
APPORVED
DATE
R.TING 7-25-68
REVISION
9
DATE
D.P.S.
10-29-81
C 1981, Hi-Shear
hi-tigue
R
PIN
TITANIUM
DRAWING NUMBER
HLT12
FIRST
NOM.
D ASH
DIA.
NO.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.565
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.645
.635
.685
D
DIA.
TD
DIA.
.1695
.1690
.1955
.1945
.2555
.2545
.3180
.3170
.3805
.3795
.4430
.4420
.5055
.5045
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
.020
.025
.030
.035
.040
.045
.050
H
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.116
.103
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
S
CHAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
CODE:
GENERAL NOTES:
HLT18
MATERIAL:
HEAT TREAT:
FINISH:
SPECIFICATION:
2-1301
1. Concentricity: Head to “D” diameter within .010 FIR.
2. Dimensions to be met after plating.
4. Hole preparation per NAS618 (Collumn “B”) for interference application
5. Use HLT118 for oversize replacement.
6. Install per Hi-Shear Spec. 299.
95,000 psi shear minimum (160,000-180-00 psi tensile per Spec. MIL-H-6875).
HLT18-( )-( )=
Cadmium plate per QQ-P-416, Type II, Class 2,
and cetyl alcohol lube per Hi-Shear Spec. 305
W
HEX.
T
DEPTH
Y
DIA.
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
.104
.094
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
MIN
POUNDS
GRIP
MINIMUM LENGTH
4,210
1,940
-2
5,550
2,500
-2
9,620
4,300
-2
14,890
6,300
-2
-3
21,430
8,700
29,000
12,100
-4
37,900
15,300
-4
HLT18-8-8
Pin Part Number
HLT1878-8-8
Collar Part Number
Pin Part Number
DRAWN
VAN
APPORVED
DATE
10-4-68
DATE
POLIVKA10-8-68
REVISION
3
DATE
D.P.S.
3-3-81
C 1981, Hi-Shear
ALLOY STEEL
DRAWING NUMBER
HLT18
FIRST
NOM.
D ASH
DIA.
NO.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.322
.306
.377
.357
.440
.415
.505
.475
.600
.565
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.645
.635
.685
D
DIA.
TD
DIA.
.1695
.1690
.1955
.1950
.2555
.2550
.3180
.3175
.3805
.3795
.4430
.4425
.5055
.5050
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
REF.
.030
.035
.045
.055
.075
.095
.095
H
R
RAD.
.060
.055
.074
.064
.090
.080
.112
.102
.140
.130
.160
.150
.188
.178
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
GENERAL NOTES: 1. Concentricity: “A” to “D” diameter within .010 FIR.
MATERIAL:
HEAT TREAT:
160,000-180-00 psi tensile per MIL-H.6875
FINISH:
HLT20-( )-( )=
Cadmium plate per QQ-P-416, Type II, Class 2,
and cetyl alcohol lube per Hi-Shear Spec. 305
SPECIFICATION: Hi-Lok Hi-Tigue Product Specification 342.
S
CHAMFER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
CODE:
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJF-3A
Modified
1/4-28UNJF-3A
Modified
5/16-24UNJF-3A
Modified
3/8-24UNJF-3A
Modified
7/16-20UNJF-3A
Modified
1/2-20UNJF-3A
Modified
W
HEX.
T
DEPTH
Y
DIA.
.0801
.0791
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
.104
.094
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
6
TENSION
POUNDS
MINIMUM
MIN
GRIP
LENGTH
4,210
2,180
-2
5,550
3,180
-2
9,620
5,820
-2
14,890
9,200
-2
-3
21,430
14,000
29,000
18,900
-4
37,900
25,600
-4
HLT20-8-8
Pin Part Number
HLT2078-8-8
Collar Part Number
Pin Part Number
2-1301
DOUBLE
SHEAR
POUNDS
MINIMUM
DRAWN
VAN
APPORVED
DATE
2-9-71
DATE
POLIVKA10-8-68
REVISION
3
DATE
D.P.S.
3-3-81
C 1981, Hi-Shear
ALLOY STEEL
DRAWING NUMBER
HLT12
D ASH
NO.
PIN
NOM.
DIA.
-5
5/32"
8-32UNJC-3B
8
USE HLT77-5
-6
3/16"
10-32UNJF-3B
8
USE HLT77-5
8
USE HLT77-8 OR HLT477-8
THREAD
A
DIA.
B
DIA.
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
8 USE
HLT77-10
8 USE
HLT77-12
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
-18
9/16"
9/16-18UNJF-3B
-20
5/8"
5/8-18UNJF-3B
-24
3/4"
3/4-16UNJF-3B
-28
7/8"
7/8-14UNJF-3B
-32
1"
1-12UNJF-3B
8
L
L1
(REF.)
P
(REF.)
.970
1.240
1.105
1.450
1.275
1.650
W
HEX
X
(REF.)
UTS
LB S .
MIN.
1.128
1.110
1.315
1.292
1.504
1.480
.188
27,500
900-1000
.205
37,500
1200-1325
.229
50,000
1450-1600
TORQUE OFF
IN. LBS
USE HLT77-14
8 USE
HLT77-16
8
USE HLT77-18
8
USE HLT77-20
1.105
1.095
1.295
1.285
1.475
1.465
.776
.770
.902
.896
1.030
1.024
NOTES:
1.371
1.351
1.571
1.551
1.836
1.816
8
3. Use HLT270 or HLT277 for oversize replacement.
MATERIA
L: 2024 aluminum alloy per QQ-A-130 or QQ-A-225/6.
HEAT TREAT:
FINISH:
HLT70-( ) = Anodize per MIL-A-8625, dye color blue, and
HLT70LP-( ) = Anodize per MIL-A-8625, color natural, and
Specification:
3 Code:
Hi-Tigue Product Specification 345.
8 EXAMPLE:
HL11T70-8 = 1/4-28 Hi-Tigue Collar with cetyl alcohol lube.
DATE
BY
DRAWN
2/27/69
VAN
CHECKED
2/29/69
MILLER
8 REVISION
6/19/73
VAN
2-1597
DRAWING NUMBER
hi-tigueR COLLAR
HLT70
D ASH
NO.
PIN
NOM.
DIA.
-5
5/32"
8-32UNJC-3B
-6
3/16"
10-32UNJF-3B
THREAD
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
-18
9/16"
9/16-18UNJF-3B
NOTES:
A
DIA.
B
.365
.355
.365
.355
.475
.465
.620
.600
.685
.675
.805
.795
.915
.905
1.105
1.095
.105
.095
.105
.095
.135
.125
.145
.135
.160
.150
.210
.200
.235
.225
.270
.260
C
DIA.
(REF.)
D
DIA.
(REF.)
.235
.184
.261
.210
.339
.270
.423
.333
.496
.395
.575
.456
.654
.518
.763
.592
L
LENGTH
L1
(REF.)
M
(REF.)
P
(REF.)
.282
.410
.344
.282
.410
.344
.462
.442
.462
.442
.592
.572
.712
.692
.755
.735
.892
.872
.964
.944
1.060
1.040
.352
.530
.484
.442
.637
.557
.485
.667
.624
.592
.762
.624
.634
.832
.763
.700
.947
.970
W
HEX.
.314
.302
.314
.302
.440
.425
.503
.488
.565
.550
.565
.550
.690
.675
.878
.861
X
(REF.)
UTS
LB S .
MIN.
.118
1,400
22-32
.118
1,600
32-12
TORQUE OFF
IN. LBS
.127
3,000
75-90
.139
5,000
140-170
.139
7,000
220-260
.157
9,500
310-370
.157
12,500
410-470
.173
14,500
575-650
2. For use on sloped surfaces upto 7º maximum on standard Hi-Tigue pins.
3. Dimensions apply after finish
MATERIAL:
Collar-2024 aluminum alloy per QQ-A-430 or QQ-A-225/6.
Washer- ”W”-17-4PH stainless steel per AMS5643, or 17-7PH per AMS5528,
or PH15-7Mo per AMS5520
“C” = A-286 high temperature alloy per AMS5731 or AMS5737.
HEAT TREAT:
Collar-Age to T6 condition per MIL-H6088.
Washer-”W” = Age to H-1025 condition for 17-4ph, age to TH1050 condition
for 17-7PH and 15-7 Mo per MIL-H-6875.
“C” =90,000 psi shear minimum.
FINISH:
Collar-
HLT71-( )A - =
Anodize per MIL-A8625, dye color -5 size “copper”.
HLT71LP-( )A =
Anodize per MIL-A8625, color natural, and solid
other sizes blue, and cetyl alcohol lube per Hi-Shear
spec. 305.
8
Washer-
8
HLT71-( )W =
Cadmium plate per QQ-P-416,Type II, Class 3.
HLT71-( )LPW =
Solid film lube per MIL-L-46010.
HLT71-( )DUW =
HLT71-( )C =
Passivate per Hi-Shear Spec. 258 and cetyl alcohol
HLT71-( )LPC =
Specification:
Code:
EXAMPLE:
HLT71-8AW = Assembly of HLT71-8A Collar and HLT71-8W Washer.
HLT71LP-8ALPW = Assembly of HLT71LP-8A Collar and HLT71-8LPW Washer.
HLT71LP-8ALPC = Assembly of HLT71LP-8A Collar and HLT71-8LPC Washer.
DATE
DRAWN
APPROVED
4-5-69
BY
VAN
DRAWING NUMBER
R
hi-tigue COLLAR
4-23-69
HLT71
1/16” GRIP VARIATION- TENSION APPLICATION
10 REVISION
2-1597
11-17-72
VAN
FOR USE ON 1/64” OVERSIZE HI-LOK PINS
D ASH
NO.
PIN
NOM.
DIA.
THREAD
-5
5/32"
8-32UNJC-3B
-6
3/16"
10-32UNJF-3B
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
-18
9/16"
9/16-18UNJF-3B
-20
5/8"
5/8-18UNJF-3B
-24
3/4"
3/4-16UNJF-3B
-28
7/8"
7/8-14UNJF-3B
-32
1"
1-12UNJF-3B
A
DIA.
B
DIA.
L
.287
.283
.307
.303
.412
.408
.518
.512
.628
.622
.733
.727
.848
.842
.915
.905
.995
.985
1.120
1.110
1.345
1.335
1.490
1.480
.179
.175
.205
.201
.265
.261
.330
.324
.393
.387
.463
.450
.528
.513
.598
.576
.661
.644
.786
.770
.911
.896
1.036
1.024
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
1.029
1.009
1.123
1.103
1.371
1.351
1.575
1.545
1.840
1.810
L1
(REF.)
P
(REF.)
.265
.344
.275
.344
.340
.380
.430
.484
.475
.557
.560
.840
.610
.970
.670
.970
.735
1.120
.940
1.240
1.060
1.520
1.225
1.650
NOTES:
1. Go thread gage penetration shall be 3/4 of one revolution minimum.
3. Use with HLT286 for oversize replacement.
4. Use HLT73 or HLT89 for higher tension application.
MATERIAL:
303 Se stainless steel per QQ-S-764 or AMS5640.
FINISH:
HLT86-( )
SPECIFICATION:
Hi-Lok Hi-Tigue Product Specifications 345.
W
HEX
.311
.302
.314
.302
.316
.332
.440
.425
.503
.448
.753
.736
.878
.861
.878
.861
1.003
.986
1.128
1.110
1.380
1.356
1.504
1.480
X
(REF.)
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
.118
2,300
30-40
.118
2,750
40-50
.127
5,000
115-130
.139
8,300
200-250
.139
12,700
360-420
.157
19,000
525-675
.157
25,500
725-1000
.171
29,000
1000-1150
.171
32,000
1350-1550
.188
42,000
1900-2200
.205
62,000
3200-3600
.229
34,000
4500-5000
6
HLT86PB-( ) = Cadmium plate per QQ-P-416, Type II, Class 2,
HLT86LP - ( ) = Solid film lube per MIL-L-46010.
HLT86TB - ( ) = Hi-Kote 2 solid film lube per Hi-Shear Spec. 292, and
CODE:
EXAMPLE:
HLT86-8 = 1/4-28 Hi-Tigue collar with Type I, Class 2 plate.
U.S. patents 2,882,773;2,927,491;2,940,495;3,027,789;3,138,987;3,578,367; design
patent 191,883; other U.S. and foreign patents granted and pending; prperty of
Hi-Shear Corporation. “Hi-Lok” and “HL” are internationally Registered Trademarks of
Hi-Shear Corporation.
DATE
DRAWING NUMBER
BY
TITLE
DRAWN
3-3-69
VAN
APPROVED
3-14-69
V MILLER
R
hi-tigue collar
HLT86
6 REVISION
2-1597
12-3-74
D.P.S.
TENSION APPLICATION
D ASH
NO.
PIN
NOM.
DIA.
-5
5/32"
8-32UNJC-3B
-6
3/16"
10-32UNJF-3B
THREAD
-8
1/4"
1/4-28UNJF-3B
-10
5/16"
5/16-24UNJF-3B
-12
3/8"
3/8-24UNJF-3B
-14
7/16"
7/16-20UNJF-3B
-16
1/2"
1/2-20UNJF-3B
-18
9/16"
9/16-18UNJF-3B
-20
5/8"
5/8-18UNJF-3B
-24
3/4"
3/4-16UNJF-3B
-28
7/8"
7/8-14UNJF-3B
-32
1"
1-12UNJF-3B
NOTES:
A
DIA.
B
DIA.
L
.287
.283
.307
.303
.412
.408
.518
.512
.628
.622
.733
.727
.848
.842
.915
.905
.995
.985
1.120
1.110
1.345
1.335
1.490
1.480
.179
.175
.205
.201
.265
.261
.330
.324
.393
.387
.456
.450
.519
.513
.582
.576
.650
.644
.776
.770
.902
.896
1.030
1.024
.447
.427
.457
.437
.552
.532
.672
.652
.744
.724
.862
.842
.942
.922
1.029
1.009
1.123
1.103
1.371
1.351
1.571
1.551
1.836
1.816
L1
(REF.)
P
(REF.)
X
(REF.)
.270
.344
.118
.280
.344
.118
.340
.380
.127
.430
.484
.139
.470
.557
.139
.560
.624
.157
.610
.763
.157
.670
.970
.171
.735
1.120
.171
.940
1.240
.188
1.060
1.450
.205
1.225
1.650
.229
W
HEX
.314
.302
.314
.302
.316
.332
.440
.425
.503
.448
.565
.550
.690
.675
.878
.861
1.003
.986
1.128
1.110
1.315
1.292
1.504
1.480
UTS
LB S .
MIN.
TORQUE OFF
IN. LBS
2,300
15-25
2,750
25-35
5,000
60-80
8,300
130-160
12,700
200-240
19,000
270-330
25,500
370-430
29,000
500-575
32,000
625-700
42,000
900-1000
62,000
1200-1325
84,000
1450-1600
1. Go thread gage penetration shall be 3/4 of one revolution minimum.
3. Use with HLT294 for oversize replacement.
6 MATERIAL:
Type 303 Se stainless steel per Spec. ASTM A582 or AMS 5640.
FINISH: 6
HLT94-( )
SPECIFICATION:
CODE:
6 EXAMPLE:
= Cadmium plate per QQ-P-416, Type II, Class 2,
HLT94PB-( ) = Silver plate per AMS2410 and cetyl alcohol lube
HLT94LP - ( ) = Solid film lube per MIL-L-46010 and yellow paint.
HLT94-8 =
1/4-28 Hi-Tigue collar with Type II, Class 2 plate and
cetyl alcohol lube.
U.S. patents 2,882,773;2,927,491;2,940,495;3,027,789;3,138,987;3,578,367; design
patent 191,883; other U.S. and foreign patents granted and pending; prperty of
Hi-Shear Corporation. “Hi-Lok” and “HL” are internationally Registered Trademarks of
Hi-Shear Corporation.
DATE
DRAWING NUMBER
BY
TITLE
DRAWN
5-21-69
VAN
APPROVED
6-5-69
V MILLER
6 REVISION
2-14-79
D.P.S.
2-1597
R
hi-tigue collar
HLT94
4
STANDARDS
MANUAL
HI-SHEAR CORPORATION (Patent Holder)-Federal Code Ident. No 73197
VOI-SHAN DIV., VSI CORP. (license)-Federal Code Ident. No 92215
STANDARD PRESSED STEEL CO. (License)-Federal Code Ident. No 56878
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
-18
9/16
-20
5/8
-24
3/5
-28
7/8
-32
1
A
DIA.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.595
.676
.641
.770
.735
.864
.829
.953
.918
1.108
1.066
1.285
1.241
1.468
1.424
B
REF.
.312
.325
.395
.500
.545
.635
.685
.770
.825
1.050
1.210
1.390
D
DIA
TD
DIA.
.1635
.1325
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.5615
.5605
.6240
.6230
.7490
.7480
.8740
.8730
.9990
.9980
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
.5550
.5500
.6180
.6120
.7430
.7370
.8680
.8610
.9930
.9860
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HLT314
SPECIFICATION :
2-597
G
(REF.)
.020
.025
.030
.035
.040
.045
.050
.055
.060
.070
.090
.110
H
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
.127
.112
.137
.122
.151
.136
.187
.172
.218
.203
R
RAD.
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
.040
.025
.040
.025
.045
.030
.050
.035
.060
.045
S
CHAMBER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
1/16"x45º
1/16"x45º
1/16"x45º
5/64x45º
5/64x45º
8 3. Surface texture per ANSI B46.1.
Standard Hi-Lok pins available in shorter grips
Vacuum melted H-11 steel alloy per AMS6487.
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJC-3A
Modified
1/4-32UNJC-3A
Modified
5/16-32UNJC-3A
Modified
3/8-32UNJC-3A
Modified
7/16-32UNJC-3A
Modified
1/2-20UNJC-3A
Modified
9/16-18UNJC-3A
Modified
5/8-18UNJC-3A
Modified
3/4-16UNJC-3A
Modified
7/8-14UNJC-3A
Modified
1-12UNJC-3A
Modified
CODE:
W
HEX.
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
.255
.2520
.255
.2520
.3185
.3150
.3820
.3780
.5100
.5040
T
DEPTH
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
.260
.240
.260
.240
.330
.300
.400
.370
.520
.490
Y
DIA.
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
.326
.306
.320
.306
.398
.378
.471
.451
.618
.598
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
MIN.
GRIP
LENGTH
5,570
2,400
-2
7,480
3,570
-2
13,000
6,000
-2
20,200
8,600
-2
29,200
12,000
-3
39,700
16,500
-4
51,800
21,000
-4
65,600
26,000
-5
81,000
32,000
117,000
42,000
159,000
62,000
207,000
84,000
First dash number indicates nominal diameter in 1/32nds.
See finish code for explanation of code letters.
HOW TO ORDER EXAMPLE:
HLT314 -8 -8
8/16 OR 1/2 MAXIMUM GRIP LENGTH
8/32 OR 1/4 NOMINAL DIAMETER PIN
PIN PART NUMBER
132,000 psi shear minimum (220,000-240,000 psi tensile Pin and Collar Assembly Part Number Combination
per Spec. MIL-11-6675).
HLT314 94 -8-8
SIZE AND GRIP LENGTH, SEE ABOVE EXAMPLE
HLT318-( )-( ) = Diffused nickel-cadmium plating per spec AMS2416.
COLLAR PART NUMBER
DRAWN
DATE
hi-tigue R PIN
and cetyl alcohol lube per Hi-Shear spec, 305.
PIN PART NUMBER
VAN 2-26-69
8HLT314-( )-( ) = Cadmium plate per spec. AMS2416, and cetyl
APPORVED
DATE
alcohol lube per Hi-Shear spec. 305.
ALLOY STEEL
V. MILLER 2-29-04
DATE
REVISION
DRAWING NUMBER
D.P.S.
8
3-1-76
HLT314
C 1976, Hi-Shear
4
STANDARDS
MANUAL
HI-SHEAR CORPORATION (Patent Holder)-Federal Code Ident. No 73197
VOI-SHAN DIV., VSI CORP. (license)-Federal Code Ident. No 92215
STANDARD PRESSED STEEL CO. (License)-Federal Code Ident. No 56878
GENERAL NOTES:
MATERIAL:
HEAT TREAT:
FINISH:
HLT318
SPECIFICATION :
D ASH
NO.
NOM.
DIA.
-5
5/32
-6
3/16
-8
1/4
-10
5/16
-12
3/8
-14
7/16
-16
1/2
A
DIA.
.262
.242
.315
.295
.412
.387
.505
.475
.600
.595
.676
.641
.770
.735
B
REF.
.312
.325
.395
.500
.545
.635
.685
D
DIA
TD
DIA.
.1635
.1325
.1895
.1885
.2495
.2485
.3120
.3110
.3745
.3735
.4370
.4360
.4995
.4985
.1595
.1570
.1840
.1810
.2440
.2410
.3060
.3020
.3680
.3640
.4310
.4260
.4930
.4880
G
(REF.)
.020
.025
.030
.035
.040
.045
.050
H
R
RAD.
.047
.037
.055
.045
.069
.059
.078
.068
.088
.078
.105
.093
.115
.103
.025
.015
.025
.015
.025
.015
.030
.020
.030
.020
.030
.020
.030
.020
4 3. Surface texture per ANSI B46.1.
standard Hi-Lok pins available in shorter grips.
Alloy steel per Spec. MIL-S-5000, MIL-S-5626, or MIL-S-6049.
95,000 psi shear minimum (160,000-180,000 psi tensile per Spec.
MIL-11-6675).
HLT318-( )-( ) =
Cadmium plate per spec. QQ-P-416, type II,
4 Class 2, and cetyl alcohol lube per Hi-Shear spec. 305.
4 HLT318TB-( )-( ) = Cadmium plate per QQ-P-416, Type II, Class 3,
Hi-Kote 2 solid film lube per Hi-Shear Spec. 292,
S
CHAMBER
REF.
1/32" x 45º
1/32" x 45º
1/32" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
3/64" x 45º
SOCKET
THREAD
8-32UNJC-3A
Modified
10-32UNJC-3A
Modified
1/4-32UNJC-3A
Modified
5/16-32UNJC-3A
Modified
3/8-32UNJC-3A
Modified
7/16-32UNJC-3A
Modified
1/2-32UNJC-3A
Modified
W
HEX.
.0645
.0635
.0806
.0791
.0967
.0947
.1295
.1270
.1617
.1582
.1930
.1895
.2242
.2207
T
DEPTH
.100
.080
.100
.080
.110
.090
.130
.110
.160
.140
.190
.170
.220
.200
Y
DIA.
.090
.075
.119
.104
.142
.122
.180
.160
.217
.197
.253
.233
.289
.269
DOUBLE
SHEAR
POUNDS
MINIMUM
TENSION
POUNDS
MINIMUM
MIN.
GRIP
LENGTH
4,010
1,940
-2
5,380
2,500
-2
9,300
4,300
-2
14,600
6,300
-2
21,000
8,700
-3
28,600
12,100
-4
37,300
15,300
-4
U.S. patents 2,882,773;2,927,491;2,940,495;
3,027,789;3,138,987;3,578,367; design patent 191,883; other U.S.
and foreign patents granted and pending; prperty of Hi-Shear
Corporation. “Hi-Lok” and “HL” are internationally Registered
DRAWN
VAN
APPORVED
VAN
REVISION
4
2-1597
DATE
4-25DATE
4-25DATE
D.P.S.
1-13-77
C 1977, Hi-Shear
ALLOY STEEL
DRAWING NUMBER
HLT318
United States Customer Teams
• REG IONAL
OFFI CES •
• DISTRI BUTION
Customer Team Washington D.C.
Customer Team Los Angeles
45025 Aviation Drive, Suite 2
Dulles, VA 20166 USA
Tel:
703.742.4450
Fax:
703.742.4451
3016 West Lomita Boulevard
Torrance, CA 90505 USA
Tel:
310.784.0700
Fax:
310.784.6665
Customer Team Dallas
Customer Team Seattle
701 Highlander Boulevard, Suite 450
Arlington, TX 76015 USA
Tel:
817.417.0677
Fax:
817.417.0678
Fisher Business Center, Suite 605
3400 188th Street S.W.
Lynnwood, WA 98037 USA
Tel:
425.712.1599
Fax:
425.744.1283
OFFICES •
Customer Team-Distribution
Dallas
Customer Team-Worldwide
Distribution Los Angeles
701 Highlander Boulevard, Suite 360
Arlington, TX 76015 USA
Tel:
817.417.4128
Fax:
817.417.4129
Tel:
310.784.6400
Fax:
310.784.6608
European Customer Teams
• A E R O S PA C E O F F I C E S •
• INDU STRIAL OFFIC ES •
Customer Team Hildesheim
Customer Team Paris
Customer Team Saint Cosme
Customer Team U.K.
P.F. 10 13 20, Steven 3
D-31113 Hildesheim-Bavenstedt Germany
Tel:
49.5121.762.40
Fax:
49.5121.762.496
P.A. de la Danne - Eragny
B.P. 14-95611
Cergy-Pontoise Cedex - France
Tel:
33(0)1.34.32.30.30
Fax:
33(0)1.30.37.12.69
9 Rue des Cressonnieres, BP 5
72110 Saint Cosme en Vairais France
Tel:
33(0)2.43.31.41.00
Fax:
33(0)2.43.31.41.41
15 New Star Road
Leicester LE4 9JD England
Tel:
44.0116.274.3660
Fax:
44.0116.274.3666
Customer Team Toulouse
Industriestraße 6
D-65779 Kelkheim Germany
Tel:
49.6195.8050
Fax:
49.6195.5647
Customer Team U.K.
15 New Star Road
Leicester LE4 9JD England
Tel:
44.0116.274.3660
Fax:
44.0116.274.3666
Customer Team Naples
Victoria Center
20 Chemim de Laporte
31300 Toulouse - France
Tel:
33(0)5.34.50.57.60
Fax:
33(0)5.61.49.04.19
Customer Team Kelkheim
Via San Nullo 171
80014 Giugliano (Na) Italy
Tel:
39.81.804.8852
Fax:
39.81.804.8854
Manufacturing Facilities
Industry: Unruh
Fullerton
Saint Cosme
Screwcorp / Voi-Shan
135 North Unruh Avenue
City of Industry, CA 91744 USA
Tel:
626.937.5400
Fax:
626.937.5454
Kaynar / Eagle
800 S. State College Blvd.
Fullerton, CA 92831 USA
Tel:
714.871.1550
Fax:
714.680.0175
Simmonds
9 Rue des Cressonnieres, BP 5
72110 Saint Cosme en Vairais
France
Tel:
33(0)2.43.31.41.00
Fax:
33(0)2.43.31.41.41
Santa Ana
Fullerton: Plant 2
Delron / Rosán
3130 West Harvard Street
Santa Ana, CA 92704 USA
Tel:
714.641.8800
Fax:
714.641.8801
K-Fast / APS
801 S. Placentia Ave.
Fullerton, CA 92831 USA
Tel:
714.738.3600
Fax:
714.278.9900
South Bay
Placentia
Camloc / RAM / Tridair / Voi-Shan
Tel:
310.784.2600
Fax:
310.784.6606
Microdot
190 West Cowther Avenue
Placentia, CA 92670 USA
Tel:
714.870.6650
Fax:
714.524.5346
Kelkheim
Stoughton
Camloc / Tridair
Industriestraße 6
D-65779 Kelkheim Germany
Tel:
49.6195.8050
Fax:
49.6195.5647
Marson
44 Campanelli Parkway
Stoughton, MA 02072 USA
Tel:
800.343.3633
Fax:
800.644.2177
Guarda
Ontario
Eurosim / Simmonds
Parque Industrial da Guarda
Lotes 53/54 6300 Guarda Portugal
Tel:
35.10.712.22007
Mairoll
747 E. Francis Street
Ontario, CA 91761 USA
Tel:
909.947.3366
Fax:
909.947.4866
Oakleigh
Recoil
20 Stamford
Road, Oakleigh Vic. 3166
Australia
Tel:
61.3.9563.1500
Fax:
61.3.9563.1980
Fémipari KFT .
Hildesheim
Mecaero / Rosán / Screwcorp / Voi-Shan
P.F. 10 13 20, Steven 3
D-31113 Hildesheim-Bavenstedt
Germany
Tel:
49.5121.762.40
Fax:
49.5121.511.500
Roques
Mecaero
Boulevard du Grand-Castaing
Roques-eur Garonne
31128 Portet - Sur - Garonne Cedex
France
Tel:
33(0)5.61.51.82.30
Fax:
33(0)5.61.51.60.78
Montbrison
SNEP
BP 84 - 42602
Montbrison Cedex France
Tel:
(33) 77.58.17.18
Fax:
(33) 77.58.57.72
8248 Nemesvámos, Hungary
Dózsa Gyorgy u. 2/a
Tel:
36.06.88.265.801
Fax:
36.06.88.265.802
Industry: Temple
Screwcorp / Voi-Shan
13001 Temple Avenue
City of Industr y, CA 91746 USA
Tel:
626.369.3333
Fax:
626.369.3416
Conches
Mecaero
Zone Induatrielle - BP 9
27910 Conches, France
Tel:
33.32.30.11.45
Fax:
33.32.30.98.06
Integrated Product Service Solutions
Fair child Fasteners Dir ect
Fair child Fasteners Dir ect: Germany
Fairchild Fasteners Direct : France
20660 Nordhoff Street
Chatsworth, CA 91311 USA
Tel:
818.998.1412
Fax:
818.407.5945
Part of Fairchild Fasteners
Robert-Bosch
Straße 4
D-86551 Aichach Germany
Tel:
49.8251.8757
Fax:
49.8251.513.11
P.A de la Danne - Eragny
B.P.14 - 95611 Cergy-Pontoise Cedex
France
Tel:
33.1.34.32.55.33
Fax:
33.1.34.32.55.30
All Trademarks are the property of their respective owners
www.fairchildfasteners.com

Voi-Shan Hi-Lok Fasteners

Transcription

Similar documents

Parker O-Ring Handbook

J@A<HA

Gaugeable Tube Fittings and Adapter Fittings

Ultra Lightweight Racing Mufflers

2001 Parker O-Ring Handbook