Anchor Systems

Transcription

Anchor Systems

Anchor Systems
Anchor Systems
Chemical Anchors
Foil capsule adhesive anchor HVU & Adhesive anchor system HVU-TZ
Page 196-197
Injectable mortar Hilti HIT-HY 200-A
Page 203
Injectable mortar HFX
Page 207
Slow-cure injection system HIT-RE 500-SD
Injectable mortar HIT-MM PLUS
Injectable mortar HIT-HY 70
Anchor Rods and Elements
Page 207
Page 201-202
Anchor rod (5.8 carbon steel) HIT-V-5.8 / HIT-V-F (5.8 hot-dip galvanized) / HIT-V-R
Page 212-213
Internal threaded sleeve (metric) HIS-N / (metric stainless) HIS-RN
Page 215
Anchor rod (carbon steel) HIT-Z & (stainless metric) Hilti HIT-Z-R
Composite mesh sleeve HIT-SC & Metal mesh sleeve HIT-S 1m (finely woven)
Dispensers, Accessories, Testers
Page 209-211
Page 214-215
Page 216
Dispenser HDE 500-A22/ HDM
Page 204
Pneumatic dispenser P 8000 D
Page 208
Hammer drill bit TE-CD & TE-YD
Cartridge holder HIT-CB 500 / HIT-CR
Accessories for blowing out drilled holes Hilti HIT & Mixers and extensions Hilti HIT
Tensile testing system HAT 28 & Anchor testing tool DPG 100
Mechanical Metal Anchors
Page 205
Page 219
Page 220
Page 221
Undercut anchor HDA-P
Page 222
Heavy-duty expansion anchor HSL-3 / HSL-3-SK
Page 224-225
Carbon steel through-set undercut anchor HDA-T
Stud anchor HST
Standard stud anchor HAS / hot-dip galvanized stud anchor HSA-F / HSA-R2 / HSA-R
Standard stud anchor HSV
Flush Anchors
Drop-in (flush) anchor HKD / HKD-SR / HKV
Screw Anchors
Page 222
Page 226
Page 227-229
Page 230
Page 231-232
Screw anchor HUS3-H 8/10/14 & HUS3-HF 10/14 HUS3-C 8/10
Page 233-234
Screw anchor HUS-V
Page 235
Anchor reusability gauge HRG 8/10/14/16
Screw anchor HUS-H 6 / HUS-H 8/10/14
Screw anchor HUS-A / HUS-I / HUS-P
Plastic Anchors
Page 234
Page 237-238
Page 242
Light-duty anchor HLD
Page 244
Universal plastic anchor HUD-1 / HUD-L
Metal insulation fastener IDMS
Insulation anchor IDP
9
Page 236
Frame anchor with countersunk head HRD-C
Impact anchor HPS-1 / HPS-1 R
Page 243
Page 245
Page 246
Page 246
Other Anchors
Anchor Systems
Sleeve anchor (hex head) HLC / HLC-H
Page 239
Metal frame anchor HT
Page 240
Sleeve anchor (closed eyebolt) HLC-EC / (counter sunk) HLC-SK
Wedge anchor DBZ
Cavity anchor HHD-S
Hook and ring anchors HA 8
Sleeve anchor with screw and washer HAM with bolt
Hilti. Outperform. Outlast.
Accessories
Page 241
Page 241
Page 241
Torque bar S-TB
Page 229
Setting tool HKD-TE-CX
Setting tool HHD
www.hilti.co.za | 08000 23331
Page 240
Page 223
Machine setting tool for stud anchors HSV/ HSA/ HST/ KB3/ KB-TZ
Page 240
Setting tool TE-C-HDA-ST / TE-Y-HDA-ST
Stop drill bit TE-C-HDA-B / TE-Y-HDA-B
Anchor Systems Contents Page
Page 206
Anchor rod (stainless metric) Hilti HIT-Z-R / (carbon steel) HIT-Z
Anchor rod HAS-E/ HAS-E-F/ HAS-E-R/ HAS-TZ
188
Page 200
Page 223
Page 230
Page 232
Page 241
189
Anchor Systems
Anchor Systems
Through-fastening
Pre-setting
Internal thread
External thread
HCR Steel (1.4529)
Stainless Steel A4 (1.4401)
Steel, sheradised, hot dipped galvanised
Steel, galvanised
Drill bit
Specification
Setting
diameter
resp. anchor
size
Fire tested
Approval for dynamic loads
Approval
Pre-stressed concrete hollow deck
Hollow brick masonry
Solid brick masonry
Aerated concrete
Lightweight concrete
Uncracked concrete
Cracked Concrete
Application Base material Approval
Anchor type
Advantages
Mechanical anchor
systems
Heavy duty anchors
Anchor fastenings for high loads,
l
l
l
l
l HDA-T/-TR/-TF/-P/-PR/-PFn Automatic undercutting
Drill bit dia.: 20-30 mm
l
l l
l
l
l
e.g. in steel construction and plant undercut anchorn High load capacity
Anchor size: M10-M20
construction, suitable for dynamic loading
n Approved for dynamic loads
Fastening heavy loads e.g. from
lll lHSL-3 heavy dutyn Integrated plastic section to telescope and pull down tightly
ll ll
columns, high racks, machinesanchor
n Special elements
Anchor size: M8-M24
n The bolt can be retorqued
Fastening heavy loads e,g. from
llHSL-G-R heavy duty
columns, high racks, machinesanchor
n Integrated plastic section to telescope and pull down tightly
Drill bit dia.: 12-28 mm l ll n Special elements
Anchor size: M8-M20
n The bolt can be retorqued
Medium duty anchors
Safety relevent fastening at facades lll
l HSC-A(R)/-I(R)n Automatic undercutting
l l
l
l
l
and ceilings where short embedment safety anchor
n Small edge distances and spacings
Anchor size: M6-M12
depth is required n Small setting depth
Fastening through in-place parts
l
l
l
l HST/-R/-HCR studn Quick and simple setting operation
l l
l
l
l
e.g. angles, tracks, channelsanchor
n Setting mark
Anchor size: M8-M24
wooden beams,etc.
n Safety wedge sleeve for certain follow up expansion
Fastening through in-place parts
l
l
l HSA/-R/-F S stud
n Two setting depths
l
l lll
like wood beams, metal sections,anchor
n Setting mark
Anchor size: M6-M20
columns,brackets etc.
n Extremely ductile steel for high bending capacity
Temporary fastenings in concrete
l
l
l
l HLC sleeve anchorn Short setting/removing operation
l
l
l
(e.g. formwork), fastening in base-
n Good load values in green concrete
Anchor size: M6-M12
material of low density
n Bridging of gaps
Fastening with threaded rods for
l 1) ll lHKD push-in anchor
pipe suspensions, air ducts,
suspended ceilings
l l
l
l
An “intelligent”expansion section which adapts to suit the base material Drill bit dia.: 8-25 mm
n
n Visual verification of full expansion
Anchor size: M8-M25
n Small setting depth
Fastening channels, brackets,
lll lHUS-3
racks, seatingsscrew anchor
n Screw driven straight into base material without using an anchor
l
n Forged on washer
n Matched system of screw anchor and screwdriver
9
Light duty anchors
Various
l
l
l
l
l
l HUD-1 universal anchor
n Fast setting
5-14 mm
l
l
applications
n Flexibility of screw length
n An anchor for every base material
6-10 mm
HUD-L universal anchor
Fastenings to weak materials
l
l HLD light duty anchor
n Flexibility of screw length
Drill bit dia.: 10 mm
l
with cavities
n Resilient toggling action to suit every base material
Securing support frames, timber frames,
l
l
l
l
l
l
l HRD-U/-S frame anchor
n Preassembled with screw
l l
l
façade panels, curtain walling
n Screw of steel 5.8 grade or stainless steel A4 (1.4401)
......
Fastening wood battens,
l ¡¡ l ¡ HPS-1 impact anchor
components for electrical and plumbing
installations
l = very suitable
190
n Quick setting with hammer
n 4-wings expansion
5-8 mm
l
l
l
l
Thread: M6
¡= may be suitable per application 1) redundant fastening
191
Anchor Systems
Anchor Systems
Through-fastening
Pre-setting
Internal thread
External thread
HCR Steel (1.4529)
Steel, galvanised
Drill bit
Specification
Setting
diameter
resp. anchor
size
Fire tested
Approval
Solid brick masonry
Aerated concrete
Uncracked concrete
Cracked Concrete
Anchor type
Advantages
Light duty anchors
Fastening light channels, brackets,
l 1) l
l l
l
l
l
l HUS screw anchorn Screw driven straight into base material without using an anchor Drill bit dia.:6mm
l
l
l
l
interior paneling or cladding
n Small drill bit diameter
n Matched system of screw anchor and screwdriver
Fastening battens, channels panels
llHHD-S cavity anchorn Controlled setting
l l
n D
eliverable with or without prefitted screw
Fastening in dry walls
lHSP/HFP drywall plug
+
n Self-drilling tip
l
n One bit for anchor and screw
n Removable
For suspended ceilings and other
l 1) l
l
l
l HA8 ring/hook anchorn Quick and easy setting
l
l
items from concrete ceilings
n
Automatic follow-up expansion
Suspension from pre-stressed
l
l
l HKH hollow deckn Approval for single point fastenings
Drill bit dia.: 10-14mm
l
l
l
l
concrete hollow decksanchor
n Approved for sprinkler systems
Thread: M6-M10
Suspension from pre-stressed
l
l
l HTW twin anchorn Approval for pre-stressed concrete hollow decks
l
l
concrete hollow decks
n Quick setting
n No setting tools needed
Light duty anchors
(Insulation fasteners)
Fastening of hard, self supporting
l
l
l IDP insulation anchor
n One-piece element
insulating materials
n Corrosion resistant
n No heat bridge
l
insulating material
thickness: 10-150 mm
Fastening of soft and hard, self supporting
l
l
l
l IZ expandablen Corrosion resistant
insulating materialsinsulation fastener
n No heat bridge
n Reliable bonding of plaster
l
insulating material
thickness up to 160 mm
9
Fastening of soft, non self supporting
l
l
l IN insulation fastener
n Reliable pressing on
l
insulating materials
Fastening insulating material of hard
l
l
l
l
l IDMS/IDMR metal
n Quick and safe
self supporting insulating materialinsulation fastener
n Fire resistant
where non flammable material is specified
lll
insulating material
thickness: up to 120 mm
Adhesive anchor
systems
Heavy duty anchors
Heavy-duty fastenings
llllll
HVZ adhesive
with small spacings andanchor
edge distances
n
n
n
n
No expansion pressure
M10-M20
llll ll
Small edge distances and spacings
A strong and flexible foil capsule
Sealed bore-hole
Adhesive anchor in cracked concrete
l
l
l
l HIT-TZ injection
n Easy setting
M8-M20
l l
l
l
adhesive anchor
n Flexibilty in use and planning
n Setting by hand
l = very suitable
192
¡= may be suitable per application 1) redundant fastening
193
Anchor Systems
Anchor Systems
Drill bit
Specification
Setting
Heavy duty anchors
Through-fastening
Pre-setting
Internal thread
External thread
HCR Steel (1.4529)
Steel, galvanised
resp. anchor
size
Fire tested
Approval
Solid brick masonry
Aerated concrete
Uncracked concrete
Cracked Concrete
Anchor type
Advantages
diameter
Heavy duty fastening with small spacings
l
l
l
l HVU adhesiven No expansion pressure and edge distancesanchor
n Small edge distances and spacings
n A strong and flexible foil capsule
HAS/HAS-R M8-M39
l l
l
l
l
l
HIS-N/HIS-RN M8-M20
rebar dia. 8-40 mm
Adhesive anchor for uncracked concrete
ll
l
l HIT-RE 500n No expansion pressure
n Flexibility in terms of drill bit diameter and annular gap
n Flexibility in terms of working time
HAS/HAS-R M8 - M39
ll lll l
HIS-N/HIS-RN M8 - M20
rebar dia. 8 - 40mm
Medium duty anchors
Adhesive anchor for cracked / uncracked l
l
l
l
l HIT-HY 200n No expansion pressure
concrete n No styrene content
n No plasticizer content
n Environmental protection due to the minimized packaging
HAS/HAS-R M8-M24
l l
l
l
l
l
HIS-N/HIS-RN M8-M20
rebar dia. 8-25 mm
Adhesive anchor for hollow/solid brick masonry
l
l
l HIT-HY 70n Optimal keying hold
HIT-SC sleeve
n No styrene content
HAS M6-M16
l l
l
l
l
HIT-AN M8-M12
HIT-IG M8-M12
Light duty anchors
Universal adhesive anchor
l
l
l
l
l HIT-MM Plusn Fast curing
HAS M6-M12
lll l
HIT-A
HIT-AN M8-M12
Universal adhesive anchor
l
l
l
l
l HFX
HAS M6-M12
l l
l
l
HIT-A
HIT-AN M8-M12
n Fast curing
n No special dispenser required
9
Special anchors
Track fixing
l
l
l HRA/HRC/HRTn EBA approval
rail anchorn Serviceability tests done by the University of Munich
n Complete support system
HRT M22 dia. 26
HRC M22 dia. 22
HRA M22 dia. 22
l l
l l l
l
lll
l = very suitable
194
¡= may be suitable per application
195
Anchor Systems
Anchor Systems
Foil capsule adhesive anchor HVU
Adhesive anchor system HVU-TZ
Technical data
Base material
condition
Environmental
conditions
Key applications & advantages
■
■
■
■
Anchoring structural steel connections
(e.g. steel columns, beams, etc.)
Anchoring in road and tunnel applications (crash and noise barriers, overhead catenary systems)
Flexible foil capsule instead of glass:
A robust solution for real jobsite
conditions
One system for many applications
thanks to a wide range of adhesive
capsules, anchor rods and internally
threaded sleeves in various diameters
and lengths
Ordering designation
HVU M8x80
HVU M10x90
HVU M12x110
HVU M16x125
Anchoring elements
Type of fastening
Material
composition
Installation
direction
Storage and transportation temperature - max.
Shelf life from
date of manufacture (at 23°C
and 50% relative
humidity)
HAS threaded rods, HIS-N 18 months
internally-threaded inserts
HVU M20x170 BULK HAS threaded rods, HIS-N 18 months
HVU M20x170
HVU M24x210
HVU M27x240
HVU M30x270
HVU M33x300
HVU M39x360
196
Approvals
ETA
Dry, Wet
Covered by ground soil,
Highly corrosive special
applications, Indoor,
damp conditions,
Indoor, dry conditions,
Indoor, ventilated
facades, Outdoor
Technical data
ETA 05/0255 for HVU adhesive
capsules (ETAG 001-05, Option
7)
Approvals and test reports may apply to selected
products only. Please refer to the documents for
details.
■
Hybrid urethane methacrylate adhesive
All
■
■
■
■
25 °C
Standard embedment
depth
Package contents
Sales pack
quantity
Item
number
80 mm
1x Adhesive capsule HVU M8x80 ZWST
10 pc
256691
90 mm
10 pc
256692
110 mm
10 pc
256693
125 mm
10 pc
256694
170 mm
1x Adhesive capsule HVU M20X170 ZW COMP. 150 pc
334745
170 mm
5 pc
256695
210 mm
5 pc
256696
240 mm
4 pc
256697
270 mm
4 pc
256698
300 mm
4 pc
256699
360 mm
2 pc
256701
Dry, Wet
Type of fastening
Pre-fastening
Pre-fastening
Heavy-duty fastenings in cracked
concrete and for dynamic loading (steel
structures, machinery, crash barriers
and noise barriers, curtain wall facades,
railings)
For safety-relevant fastenings
Dynamic loads
Suitable for use in cracked concrete
Suitable for dynamic loading subject to
fatigue, shock, and seismic activity
Ordering
designation
Anchor Anchoring elements
size
HVU-TZ M10
M10
HVU-TZ M20
M20
Approvals
Base material
condition
Environmental
conditions
Material
composition
Installation
direction
ETA
damp conditions,
Indoor, ventilated
facades, Outdoor
ETA 03/0032 for HVZ adhesive
anchor system (ETAG 001-05,
Option 1)
details.
All
25 °C
Shelf life from date of manufacture (at 23°C and 50%
relative humidity)
Standard embedment
depth
Package contents
Sales pack
quantity
Item
number
HAS-TZ torque-controlled bonded anchor 18 months
75 mm
10 pc
311368
HAS-TZ torque-controlled bonded anchor 18 months
170 mm
1x Adhesive capsule
HVU-TZ M10 ZWST
4 pc
335942
1x Adhesive capsule
HVU-TZ M20x190
ZWST
9
197
Anchor
Anchor Systems
Systems
Anchor
Anchor Systems
Systems
One giant leap.
The Hilti HIT-HY 200 system.
Light years ahead.
Set anchor rods and rebars without cleaning the
holes.
Optimal for post-installed
rebar connections.
Holes that clean themselves.
Hilti now offers an ingenious system that either removes the drilling
dust through a hollow drill bit while drilling is in
progress or, when HIT-Z anchor rods
are used, makes hole cleaning
completely unnecessary. This not
only speeds up the job and thus
saves valuable time, it also gives
you a decisive extra safety margin.
For anchor rods.
No cleaning required.
Thanks to the special design of Hilti HIT-Z anchor rods,
you’re always on the safe side – even in water-saturated
and uncleaned holes. The unique shape of the anchor
rod makes hole cleaning completely unnecessary.
Find out more at:
www.hilti.com/HY200
198
9
Hilti TE-CD and TE-YD hollow drill bits make subsequent hole cleaning completely unnecessary. Dust
is removed by the vacuum system while drilling is in
progress. You therefore also benefit from faster drilling
and a virtually dustless working environment. This
drilling system makes rebar installation extremely reliable and is ideal for large-scale, repetitive use.
The new Hilti HIT-HY 200 injectable adhesive mortar Safe SET-system makes
your dreams come true. You can now set anchor rods or make post-installed
rebar connections using injectable adhesive mortar without having to clean the
holes.
199
Anchor Systems
Anchor Systems
Slow-cure injection system HIT-RE 500-SD
Approvals
Technical data
Base material
condition
Environmental
conditions
■
■
■
■
Structural connections with post-installed rebar (e.g. extension/connection
to walls, slabs, stairs, columns, foundations, etc.)
Anchoring secondary steel structures
(e.g. balustrades, steel ledgers, etc)
Suitable for use in cracked and uncracked concrete with all anchoring
elements
Seismic approval allows use for seismic
applications
ETA
Dry, Submerged, Waterfilled, Wet
■
Anchor rod (stainless metric) Hilti HIT-Z-R
Type of fastening
Cleaning
procedures
Material
composition
Installation
direction
damp conditions,
Indoor, ventilated
facades, Outdoor,
Underwater, fresh water,
Underwater, salty water
ETA, Seismic
■
ETA 09/0295 for HIT-RE 500-SD
injection mortar for rebar (ETAG
001-05, Option 1)
■
ETA 07/0260 HIT-RE 500-SD
injection mortar for anchoring
applications (ETAG 001-05,
Option 1)
■
■
details.
Shelf life from date
of manufacture (at
23°C and 50% relative
humidity)
Pre-fastening,
Through-fastening
Compressed-air
cleaning
Epoxy adhesive
All
Ordering designation Anchor
size
Anchoring elements
HIT-RE 500-SD/500/1 9 months
0.5 l
HIT-RE 500-SD/330/1 12 months
0.33 l
HAS threaded rods, HIS-N internally-threaded 1
inserts, HIT-V threaded rods, Rebar
Number
of mixers
included
Package contents
1x Foil pack, 1x Mixer,
1x Mixer extension
HAS threaded rods, HIS-N internally-threaded 1
inserts, HIT-V threaded rods, Rebar
1x Foil pack, 1x Mixer,
1x Mixer extension
Sales pack
quantity
Item
number
1 pc
387093
1 pc
387092
Injectable mortar Hilti HIT-RE 500
Approvals
Technical data
Base material
condition
Environmental
conditions
Dry, Submerged, Waterfilled, Wet
Type of fastening
Pre-fastening,
Through-fastening
■
■
■
■
Structural connections with post-installed rebar (e.g. extension/connection
to walls, slabs, stairs, columns, foundations, etc.)
(e.g. balustrades, steel ledgers, etc.)
High performance and technical superiority as per international approvals
Especially suitable for large-diameter
elements and/or deep embedment
depths
Cleaning
procedures
Material
composition
Installation
direction
Shelf life from date of
manufacture (at 23°C and
50% relative humidity)
COMBO 40 x RE500 500 + HDM500 9 months
Dispenser
Content
per can/
cartridge
damp conditions,
Indoor, ventilated
facades, Outdoor, Underwater, fresh water
ETA
Package contents
1x Dispenser HDM 500 assy, 160x Foil pack, 160x Mixer, 160x Mixer extension, 1x Round brush 13MM HG, 1x Round brush 18MM HG, 1x Round
brush 28MM HG, 1x Cassette 500ml black, 1x Blow-out pump, 1x Case
1 pc
3505557
1x Dispenser HDM 500 assy, 50x Foil pack, 50x Mixer, 50x Mixer extension,
1x Cassette 500ml black
1 pc
3512643
1x Dispenser HDM 500 assy, 200x Foil pack, 200x Mixer, 200x Mixer extension, 1x Round brush 13MM HG, 1x Round brush 18MM HG, 1x Round
brush 28MM HG, 1x Cassette 500ml black, 1x Blow-out pump, 1x Case
1 pc
3514096
1 pc
3498454
1 pc
426672
COMBO 200x RE500 330 +
HDM500 Dispenser
12 months
0.33 l
Combo RE 500 & PD 5
9 months
0.5 l
HIT-RE 500/500/1 INT
9 months
0.5 l
1x Foil pack, 1x Mixer, 1x Mixer extension
0.33 l
200
M8
Baseplate
Base plate
clearance hole clearance hole
pre-fastening
through-fastening
9 mm
11 mm
Required
tightening
torque
10 Nm
Wrench
size
Anchor
length
Useable
thread
length
Pre-fastening,
Through-fastening
ETA
Steel, A4 (SS316)
All
Yes
Yes
Steel, stainless
Package contents
Sales
pack
quantity
Item
number
1x Anchor rod HIT-Z-R M8x80 assy 40 pc
2018422
1x Anchor rod HIT-Z-R M10x160
assy
40 pc
2018428
assy
20 pc
2018429
20 pc
2018431
155 mm
38 mm
assy
12 pc
2018434
24 mm
240 mm
assy
12 pc
2018437
30 mm
215 mm
123 mm 1x Anchor rod HIT-Z-R M16x240
assy
assy
6 pc
2018438
13 mm
80 mm
8 mm
HIT-Z-R M10x95
M10
12 mm
14 mm
25 Nm
17 mm
95 mm
22 mm
HIT-Z-R M10x160
M10
12 mm
14 mm
25 Nm
17 mm
160 mm
87 mm
HIT-Z-R M12x105
M12
14 mm
16 mm
40 Nm
19 mm
105 mm
29 mm
HIT-Z-R M12x155
M12
14 mm
16 mm
40 Nm
19 mm
155 mm
79 mm
HIT-Z-R M16x155
M16
18 mm
20 mm
80 Nm
24 mm
HIT-Z-R M16x240
M16
18 mm
20 mm
80 Nm
HIT-Z-R M20x215
M20
22 mm
24 mm
150 Nm
91 mm
assy
40 pc
2018425
Item
number
3505556
0.33 l
12 months
Sales
pack
quantity
1 pc
12 months
HIT-RE 500/330/1 INT
Type of fastening
9
1x Dispenser HDM 500 assy, 40x Foil pack, 40x Mixer, 40x Mixer extension,
1.4 l
Outdoor, Underwater,
fresh water
All
COMBO 50x RE500 330 + HDM500
Dispenser
9 months
Externally threaded
Environmental
conditions
Epoxy adhesive
0.5 l
HIT-RE 500/1400/1 INT
ETA 04/0027 for HIT-RE 500
Option 7)
0.5 l
0.5 l
Head configuration
Compressed-air cleaning, Manual cleaning
9 months
9 months
Off-the-shelf rods
details.
COMBO 160 x RE500 500 +
HDM500 Dispenser
Combo PD 5 & x160 RE 500/500ml
Anchor type
Material, corrosion
Content
per can/
cartridge
■
Technical data
Approvals / test
reports
Material
composition
Installation
direction
Tested/approved
for diamond drilling
PROFIS
HIT-Z-R M8x80
Fastenings in cracked and uncracked
concrete made with Hilti HIT HY200
For applications where shallow embedment is needed
Very high loads in cracked concrete
Very productive solution that saves
cleaning time
1 pc
4 pc
1 pc
3498455
426670
426675
201
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
concrete made with Hilti HIT-HY 200
Seismic anchoring applications
(e.g. bracing of reinforced concrete
buildings)
Very high loads in cracked concrete and
seismic applications according to ICCES and ETA C2 approvals
Safe and productive solution thanks to
elimination of the hole cleaning process
Approvals
ETA, Seismic
ETA 12/0006 for HIT-HY 200-A
injection mortar and HIT-Z(R) rod
for anchoring applications (ETAG
001-05, Option 1)
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Indoor, dry conditions
Approvals / test
reports
Material
composition
Installation
direction
Tested/approved
PROFIS
ETA
ICC-ES
Steel, zinc-plated (min.
5 µm)
details.
Material, corrosion
Pre-fastening,
Through-fastening
All
Injectable mortar Hilti HIT-HY 200-A
Technical data
Base material
condition
Environmental
conditions
ETA 12/0006 for HIT-HY 200-R
001-05, Option 1)
ICC-ES ESR-3187 for HIT-HY
200 A/R injection mortar
Yes
■
■
■
Yes
■
Steel, zinc-plated
■
(e.g. steel columns, beams)
(e.g. racking, guard rails, sound barriers)
Anchoring safety barriers, balustrades,
fire staircases
No hole cleaning required with the revolutionary new Hilti HIT-Z anchor rod
Automatic hole cleaning with TE-CD
and TE-YD drill bits in combination with
Hilti vacuum cleaners
Type of fastening
Cleaning
procedures
Material
composition
Installation
direction
Approvals
Dry, Wet
damp conditions,
Indoor, ventilated
facades, Outdoor
Pre-fastening,
Through-fastening
Auto-cleaning with
Hilti hollow drill bits,
Compressed-air cleaning, Manual cleaning,
No cleaning required
with Hilti HIT-Z rod
ETA
ETA, Seismic
ICC-ES
injection mortar for rebar (ETAG
001-05, Option -)
injection mortar and standard element for anchoring application
(ETAG 001-05, Option 1)
001-05, Option 1)
details.
All
Anchor rod (carbon steel) HIT-Z
Ordering
designation
Anchor
size
Base plate
clearance
hole
Baseplate
clearance hole
pre-fastening
Base plate clearance
hole through-fastening
Required Wrench
tightening size
torque
Anchor
length
HIT-Z M8x80
M8
9 mm
9 mm
11 mm
10 Nm
13 mm 80 mm
HIT-Z M10x95
M10
12 mm
12 mm
14 mm
25 Nm
17 mm 95 mm
HIT-Z M12x105 M12
14 mm
14 mm
16 mm
40 Nm
19 mm 105 mm
HIT-Z M12x196 M12
14 mm
14 mm
16 mm
40 Nm
19 mm 196 mm
HIT-Z M16x155 M16
18 mm
18 mm
20 mm
80 Nm
24 mm 155 mm
HIT-Z M16x205 M16
18 mm
18 mm
20 mm
80 Nm
24 mm 205 mm
HIT-Z M20x215 M20
22 mm
22 mm
24 mm
150 Nm
30 mm 215 mm
HIT-Z M20x250 M20
22 mm
22 mm
24 mm
150 Nm
30 mm 250 mm
Package contents
Sales
pack
quantity
Item
number
1x Anchor rod HIT-Z
M8x80 assy
40 pc
2018364
1x Anchor rod HIT-Z
M10x95 assy
40 pc
2018367
1x Anchor rod HIT-Z
M12x105 assy
20 pc
2018411
1x Anchor rod HIT-Z
M12x196 assy
20 pc
2018415
1x Anchor rod HIT-Z
M16x155 assy
12 pc
2018416
1x Anchor rod HIT-Z
M16x205 assy
12 pc
2018418
1x Anchor rod HIT-Z
M20x215 assy
6 pc
2018420
1x Anchor rod HIT-Z
M20x250 assy
6 pc
2018421
Content Package contents
per can/
cartridge
Sales
pack
quantity
12 months
0.33 l
1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Cassette
500ml red
1 pc
3512429
Combo 80x HY200 330ml +
HDM500 Dispenser
12 months
0.33 l
500ml red
1 pc
3512430
Combo 5x HY200 330ml +
HDM500 Dispenser
12 months
0.33 l
500ml red
1 pc
3512486
COMBO 5x HY200 500ml +
HDM500 Dispenser
12 months
0.5 l
500ml black, 1x Cassette 500ml red
1 pc
3504824
HDM500 Dispenser
12 months
0.5 l
1 pc
3504825
C 20x HY200 500ml + HDM500
+ HIT-Z M8x80
12 months
0.5 l
1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 40x Anchor rod
HIT-Z M8x80 assy, 1x Cassette 500ml black, 1x Cassette 500ml red
1 pc
3504826
C 20x HY200 500ml + HDM500
+ HIT-ZM10x95
12 months
0.5 l
1 pc
3504827
C 20xHY200 500ml + HDM500
+ HIT-ZM12x105
12 months
0.5 l
1 pc
3504828
C 20xHY200 500ml + HDM500
+ HIT-ZM16x155
12 months
0.5 l
1 pc
3504829
C 20xHY200 500ml + HDM500
+ HIT-ZM20x215
12 months
0.5 l
1 pc
3504830
Combo 40 x HY200 500ml
12 months
12 months
0.5 l
HDM500 Dispenser
0.5 l
1 pc
3504831
C 20xHY200 500ml + HDM500
+ 1xTE-YD18/59
12 months
0.5 l
1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Hammer drill 1 pc
bit TE-YD 18/59, 1x Cassette 500ml black, 1x Cassette 500ml red
3504843
C 20xHY200 500ml + HDM500
+ 1xTE-YD20/59
12 months
0.5 l
3504844
C 20xHY200 500ml + HDM500
+ 1xTE-YD25/59
12 months
0.5 l
3504845
S&M Premium Cordless Kit
12 months
0.5 l
3521887
Combo 40 x HY 200 330ml
12 months
0.33 l
1x Dispenser HDE 500-A22 EU assy, 1x Cassette 500ml black, 1x Cassette 500ml red, 1x
1 pc
Case, 1x Cordless combihammer TE 30-A36, 1x Case, 1x Battery pack B 36/6.0 Li-Ion assy,
1x Battery pack B 22/1.6 Li-Ion, 1x Battery charger C 4/36-350 230V, 20x Foil pack, 20x
Mixer, 20x Mixer extension, 1x Hammer drill bit TE-CX 16/22, 1x Hammer drill bit TE-CX
18/22, 1x Cassette 500ml red
HIT-HY 200-A 500/2
12 months
0.5 l
1 pc
2022696
HDM500 Dispenser
HIT-HY 200-A 330/2
HIT-HY 200-A 500/1/P
202
Shelf life from
and 50% relative
humidity)
12 months
12 months
0.33 l
0.5 l
1 pc
Item
number
3504832
1 pc
3500240
1 pc
2022697
20 pc
2047405
203
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Injection of Hilti HIT adhesive mortar
for fastening anchor rods and rebars in
concrete and masonry
Serial fastenings and/or injection in
deep holes
No need for external power source
supply
Easy injection even at low temperatures
Dose adjustment knob for accurate and
controlled dispensing
Hammer drill bit TE-CD
Dispenser, setting
tool, accessory,
tester type
Battery type
Dispensers
Dispenser type
Battery
Power source type
Compact B22/1.6 or
B22/3.3 battery
Technical data
22 V
Base material
Reinforced concrete,
Concrete
Working mode
All tools with TE-C
(SDS-plus) chuck
Hammer drilling
■
■
■
■
■
Drilling holes for anchoring structural
steel connections (e.g. steel columns,
beams)
Drilling holes for structural connections
with post-installed rebars
Drilling holes for anchoring secondary
steel structures (e.g. staircases, steel
ledgers)
Drilling and hole cleaning in one step
Optimum hole cleaning for consistent
anchor setting
Ordering
designation
Connection
end
TE-C
12 mm
330 mm 200 mm
TE-CD 14/37
TE-C
14 mm
370 mm 240 mm
TE-CD 16/37
TE-C
16 mm
370 mm 240 mm
TE-CD 18/37
TE-C
18 mm
370 mm 240 mm
TE-CD 12/33
Weight Package contents
HDE 500-A22 CR/CB cas 2.2 kg 1x Dispenser HDE 500-A22 EU assy, 1x Cassette 500ml black, 1x Cassette 500ml red, 1x
Case
Sales pack
quantity
1 pc
Item number
Diameter Length
■
■
■
■
Tool type
Reinforced concrete, Concrete All tools with TE-C (SDSplus) chuck
Connection Diameter Length
end
Connection end
TE-Y
Length
590 mm
Working length
400 mm
Base material
Reinforced concrete,
Concrete
Tool type
Drilling holes for anchoring structural
steel connections (e.g. steel columns,
beams)
Drilling holes for structural connections
with post-installed rebars
Drilling holes for anchoring secondary
steel structures (e.g. staircases, steel
ledgers)
Drilling and hole cleaning in one step
Optimum hole cleaning for consistent
anchor setting
Ordering
designation
Base material
Technical data
2005637
■
Working
length
Working mode
Sales pack
quantity
Item
number
Hammer drilling 1 pc
2018940
2018942
2018945
2018946
Hammer drill bit TE-YD
204
TE-C
Tool type
Dispenser HDE 500-A22
Connection end
Working mode
Working
length
TE-YD 18/59
TE-Y
18 mm
590 mm 400 mm
TE-YD 20/59
TE-Y
20 mm
590 mm 400 mm
TE-YD 25/59
TE-Y
25 mm
590 mm 400 mm
Base material
All tools with TE-Y
(SDS-max) connection
9
Hammer drilling
Tool type
Reinforced concrete, Concrete All tools with TE-Y (SDSmax) connection
Working mode
Sales pack
quantity
Item
number
2018957
2018959
2018962
205
Anchor Systems
Anchor Systems
Injectable mortar HIT-MM PLUS
Injectable mortar HFX
Technical data
■
■
■
■
■
Wide range of fastening applications in
the medium load range in hollow block
(with plastic sleeves), solid block and
concrete where no approval is required
Fence and railing posts, gates, window
grills, non-structural rebars, wall cabinets, bathroom fittings, air conditioning
systems, lights
Surface treatment
Easy dispensing thanks to well-proven
manual, cordless and pneumatic
dispensers
Unique soft foil pack for less waste
Shelf life
from date of
manufacture
(at 23°C and
50% relative
humidity)
Content
per can/
cartridge
COMBO 5x MMPlus 330 12 months
+ HDM500 Dispenser
0.33 l
COMBO 50x MMPlus 330 + HDM500
Dispenser
12 months
0.33 l
COMBO 200xMM
Plus 330 + HDM500
Dispenser
12 months
0.33 l
Dispenser
12 months
0.5 l
Dispenser
12 months
0.5 l
HIT-MM PLUS 330/2
12 months
HIT-MM PLUS 500/2
12 months
0.33 l
0.5 l
Technical data
Base material
condition
Type of fastening
Dry, Wet
Cleaning
procedures
Material
composition
Installation
direction
Manual cleaning
Pre-fastening
All
■
25 °C
■
■
■
■
Compatibility
sleeves
Mixer
extension
included
Number
of mixers
included
Package contents
Sales
pack
quantity
1x Dispenser HDM 500 assy, 5x Foil pack,
10x Mixer, 5x Mixer extension, 1x Cassette
500ml black
1 pc
3512431
1 pc
3512432
1 pc
3514126
1 pc
3505323
1 pc
3505324
500ml black
400x Mixer, 200x Mixer extension, 1x Round
brush 13MM HG, 1x Round brush 18MM
HG, 1x Round brush 28MM HG, 1x Cassette
500ml black, 1x Blow-out pump, 1x Case
500ml black
HIT-SC or HIT-IC
HIT-SC or HIT-IC
Yes
Yes
2
2
320x Mixer, 160x Mixer extension, 1x Round
brush 13MM HG, 1x Round brush 18MM
HG, 1x Round brush 28MM HG, 1x Cassette
500ml black, 1x Blow-out pump, 1x Case
1 pc
1 pc
Item
number
the light and medium load range where
no approval is required
Suitable for universal use in hollow
block (with plastic sleeve), solid block,
uncracked concrete and some natural
stone
Fence and railing posts, gates, window
grills, wall cabinets, bathroom fittings,
air conditioning systems, lights
Fast curing – achieves a secure hold in
a short time
Cartridges fit all standard dispensers
and caulking guns
Manual cleaning
All
25 °C
Anchoring elements
Compatibility sleeves
HFX 275/2/Asia
0.275 l
HAS threaded
rods, HIS-N
internally-threaded
inserts, HIT-IC
internally-threaded
rods, HIT-V
threaded rods
Hilti HIT-SC, Hilti HIT-S No
9 months
Mixer extension
included
Number of
mixers
included
2
Package contents
Sales
pack
quantity
1x Cartridge, 2x Mixer 1 pc
Item
number
284265
Injectable mortar HIT-HY 70
Technical data
2031079
2031400
■
■
■
■
Applications in hollow and solid
masonry
Suitable for glass structures
For heavy bracing on insulated materials in applications such as the installation of sun shades
Provides strong, reliable and easy-toinstall fastenings in a variety of masonry
materials
For use in indoor and outdoor applications in dry or wet drilled holes
Ordering designation Shelf life from date of manufacture (at 23°C and 50% relative
humidity)
HIT-HY 70 330/2
Cleaning
procedures
Material
composition
Installation
direction
Pre-fastening
Content
per can/
cartridge
■
Dry, Wet
Ordering designation Shelf life from
and 50% relative humidity)
206
Base material
condition
Type of fastening
12 months
Approvals
Base material
condition
Environmental
conditions
Dry, Wet
Type of fastening
Pre-fastening
Cleaning
procedures
Material
composition
Installation
direction
Indoor, damp conditions, Indoor, dry conditions, Indoor, ventilated
facades, Outdoor
ETA 09/0265 for HIT-HY 70
applications in concrete (ETAG
001-05, Option 7)
details.
Compressed-air cleaning, Manual cleaning
All
Content per can/cartridge Compatibility sleeves
0.33 l
ETA
Mixer
Number
extension of mixers
included
included
Hilti HIT-SC, Hilti HIT-S Yes
2
Package
contents
Sales pack
quantity
1x Foil
1 pc
pack, 2x
Mixer, 1x Mixer
extension
Item
number
383677
207
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
for fastening anchor rods and rebar in
For use with 1400 ml Hilti HIT foil packs
Dispensing system for accurate hole
filling
Robust dispensers for tough jobsite
conditions
Dispenser, setting
tool, accessory,
tester type
Dispenser type
Dispensers
Optimal air flow
rate
Power source type
250 l/min
Approvals
Technical data
Pneumatic
Compressed air
■
■
Incorporates a chisel-shaped end to cut
and mix the Hilti HVU capsule, embedment marking for easy setting, and a
conical head (M8-M24 only)
Large family of anchor rods (M8-M39)
ETA
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
PROFIS
Steel, 5.8 grade, zincplated (min. 5 µm)
Material, corrosion
Steel, zinc-plated
Weight
Package contents
P 8000 D
6.2 kg
1x Dispenser P 8000 D assy, 1x Cassette VIC printed, 1x Carrying device P 8000 D
7)
Pre-fastening
MAX injection mortar for anchoring applications (ETAG 001-05,
Option 7)
All
001-05, Option 7)
Yes
details.
In-service tempera- -40 °C
ture - min.
Option 7)
Anchor rod HAS-E
Sales pack
quantity
1 pc
Item number
373959
Ordering
designation
Anchor
size
Base plate
clearance hole
Wrench/
nut size
Wrench
size
HAS-E-5.8
M8x80/14
M8
10 mm
13 mm
M10
HAS-E-5.8
M10x90/21
HAS-E-5.8
M12x110/128
HAS-E-5.8
M12x110/168
HAS-E-5.8
M12x110/28
HAS-E-5.8
M16x125/38
HAS-E-5.8
M20x170/48
HAS-E-5.8
M20x170/68
HAS-E-5.8
M20x170/108
HAS-E-5.8
M24x210/54
Anchor
length
Standard embedment depth
Package contents
Sales pack
quantity
Item
number
13 mm 110 mm 80 mm
Max. fixture thickness
at standard embedment depth
14 mm
20 pc
332219
12 mm
17 mm 130 mm 90 mm
21 mm
1x Anchor rod HAS-E
M8X80/14 assy
20 pc
332220
M12
14 mm
19 mm 260 mm 110 mm
128 mm
1x Anchor rod HAS-E
M10X90/21 assy
10 pc
333103
M12
14 mm
19 mm 300 mm 110 mm
168 mm
10 pc
333104
M12
14 mm
19 mm 160 mm 110 mm
28 mm
20 pc
332221
M16
18 mm
24 mm 190 mm 125 mm
38 mm
20 pc
332222
M20
22 mm
30 mm 240 mm 170 mm
48 mm
10 pc
332223
M20
22 mm
30 mm 260 mm 170 mm
68 mm
10 pc
333110
M20
22 mm
30 mm 300 mm 170 mm
108 mm
10 pc
333111
M24
26 mm
36 mm 290 mm 210 mm
54 mm
10 pc
332224
1x Anchor rod HAS-E
M12X110/128 assy
1x Anchor rod HAS-E
M12X110/168 assy
1x Anchor rod HAS-E
M12X110/ 28 assy
1x Anchor rod HAS-E
M16X125/ 38 assy
1x Anchor rod HAS-E
M20X170/ 48 assy
1x Anchor rod HAS-E
M20X170/ 68 assy
1x Anchor rod HAS-E
M20X170/108 assy
1x Anchor rod HAS-E
M24X210/ 54 assy
9
Anchor rod HAS-E-F
■
■
conical head
Technical data
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Indoor, damp conditions, Outdoor
Material
composition
Installation
direction
PROFIS
Steel, 5.8 grade, hot-dip
galvanized (min. 43 µm)
Material, corrosion
Steel, sherardised / hotdip galvanised
Pre-fastening
All
Yes
ture - min.
HAS-E-F-5.8 M10x90/21
HAS-E-F-5.8 M12x110/28
HAS-E-F-5.8 M16x125/38
HAS-E-F-5.8 M20x170/48
HAS-E-F-5.8 M24x210/54
208
Anchor
size
M10
M12
M16
M20
M24
Base plate
clearance hole
12 mm
14 mm
18 mm
22 mm
26 mm
Wrench
size
Anchor
length
17 mm 130 mm
19 mm 160 mm
24 mm 190 mm
30 mm 240 mm
36 mm 290 mm
Standard embedment
depth
90 mm
110 mm
125 mm
170 mm
Max. fixture thickness at
Drilling depth Sales pack
standard embedment depth
quantity
21 mm
28 mm
38 mm
210 mm
90 mm
110 mm
125 mm
170 mm
210 mm
20 pc
20 pc
20 pc
10 pc
10 pc
Item
number
333145
333148
333153
333158
333163
209
Anchor Systems
Anchor Systems
Anchor rod HAS-E-R
■
■
conical head (M8-M24 only)
Technical data
Technical data
Off-the-shelf rods
Head configuration
Externally threaded
Head configuration
Externally threaded
Environmental
conditions
fresh water
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
PROFIS
Material, corrosion
Steel, zinc-plated
Pre-fastening
Material
composition
Installation
direction
PROFIS
Steel, A4 (SS316)
Material, corrosion
Steel, stainless
Base plate
clearance
hole
Wrench
size
All
■
Yes
■
Max. fixture
thickness
at standard
embedment
depth
Drilling depth Package contents
Sales
pack
quantity
Item
number
HAS-E-R M8x80/14
M8
9 mm
13 mm 110 mm
80 mm
14 mm
80 mm
20 pc
333119
90 mm
21 mm
90 mm
1x Anchor rod HAS-E-R M8X80/
14
HAS-E-R M10x90/21
M10
12 mm
17 mm 130 mm
20 pc
333122
HAS-E-R M12x110/28
M12
14 mm
19 mm 160 mm
110 mm
28 mm
110 mm
20 pc
333126
14 mm
19 mm 220 mm
110 mm
88 mm
110 mm
1x Anchor rod HAS-E-R
M12X110/ 28
HAS-E-R M12x110/88
M12
10 pc
333127
HAS-E-R M16x125/38
M16
18 mm
24 mm 190 mm
125 mm
38 mm
125 mm
20 pc
HAS-E-R M16x125/108 M16
18 mm
24 mm 260 mm
125 mm
108 mm
125 mm
M16X125/ 38
HAS-E-R M20x170/48
M20
22 mm
30 mm 240 mm
170 mm
48 mm
170 mm
M16X125/108
HAS-E-R M20x170/108 M20
22 mm
30 mm 300 mm
170 mm
108 mm
170 mm
HAS-E-R M24x210/54
26 mm
36 mm 290 mm
210 mm
54 mm
210 mm
M20X170/108
M24
Anchor
length
Standard
embedment
depth
M10X90/21
■
ture - min.
Anchor
size
Off-the-shelf rods
Anchor type
Type of fastening
Approvals
Anchor type
Suitable for fastening in cracked concrete in combination with Hilti HVU-TZ
capsules
HVZ combines highest performance in
chemical anchors with an unparalleled
level of safety
Minimal sensitivity to cracked concrete
(tension zone)
Pre-fastening
ETA 03/0032 for HVZ adhesive
anchor system (ETAG 001-05,
Option 1)
details.
All
Yes
ture - min.
Anchor rod HAS-TZ
Anchor Base plate
size
clearance hole
Required
tightening
torque
Wrench
size
333131
HAS-TZ M10X75/50
M10
12 mm
20 Nm
17 mm 159 mm 75 mm
10 pc
333132
HAS-TZ M16X125/100 M16
18 mm
80 Nm
24 mm 271 mm 125 mm 100 mm
M20X170/ 48
10 pc
333135
10 pc
333136
M24X210/ 54
10 pc
333137
M12X110/ 88
ETA
Anchor
length
Standard
embedment
depth
Max. fixture
thickness
at standard
embedment
depth
50 mm
Package contents
Sales pack
quantity
1x Anchor rod HASTZ M10x75/50
10 pc
308384
5 pc
332521
1x Anchor rod HASTZ M16x125/100
Item number
9
210
211
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Suitable for fastenings in concrete in
combination with the relevant Hilti HIT
injectable adhesive mortar
Suitable for fastenings in masonry in
combination with Hilti HIT-HY 70
For applications where embedment
depth is between 4x - 20x rod diameter
Flexibility: approved embedment depth
between 4 to 20 times rod diameter allows shallow fastenings in thin concrete
slabs or walls
Productivity: use of optimal rod length
and diameter saves time and money
with every fastening
Approvals
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
PROFIS
ETA
Pre-fastening,
Through-fastening
ture - min.
HIT-CB
Accessories
ETA, Seismic
■
■
■
Option 1)
injection mortar and standard
elements for anchoring applications (ETAG 001-05, Option 1)
Wrench size Anchor length Useable thread length Standard
embedment
depth
HIT-V-F M10x95
M10
12 mm
17 mm
95 mm
78 mm
HIT-V-F M12x110
M12
14 mm
19 mm
110 mm
91 mm
HIT-V-F M12x120
M12
14 mm
19 mm
120 mm
101 mm
HIT-V-F M16x150
M16
18 mm
24 mm
150 mm
127 mm
HIT-V-F M16x300
M16
18 mm
24 mm
300 mm
277 mm
HIT-V-F M20x180
M20
22 mm
30 mm
180 mm
153 mm
HIT-V-F M20x260
M20
22 mm
30 mm
260 mm
233 mm
HIT-V-F M24x450
M24
26 mm
36 mm
450 mm
418 mm
Sales pack
quantity
Item
number
1x Anchor rod HITV-5.8 M8x80 assy
20 pc
387054
10 pc
387057
10 pc
387058
10 pc
387061
5 pc
387064
5 pc
387066
■
5 pc
387068
■
5 pc
387069
10 pc
387070
5 pc
387072
9 mm
13 mm
80 mm
65 mm
80 mm
60 mm
HIT-V-5.8 M10x95
M10
12 mm
17 mm
95 mm
78 mm
90 mm
90 mm
HIT-V-5.8 M10x130 M10
12 mm
17 mm
130 mm
113 mm
90 mm
90 mm
HIT-V-5.8 M12x150 M12
14 mm
19 mm
150 mm
131 mm
110 mm
110 mm
HIT-V-5.8 M16x150 M16
18 mm
24 mm
150 mm
127 mm
125 mm
125 mm
HIT-V-5.8 M16x300 M16
18 mm
24 mm
300 mm
277 mm
125 mm
125 mm
HIT-V-5.8 M20x180 M20
22 mm
30 mm
180 mm
153 mm
170 mm
170 mm
HIT-V-5.8 M20x260 M20
22 mm
30 mm
260 mm
233 mm
170 mm
170 mm
HIT-V-5.8 M20x380 M20
22 mm
30 mm
380 mm
353 mm
170 mm
170 mm
HIT-V-5.8 M24x300 M24
26 mm
36 mm
300 mm
268 mm
210 mm
210 mm
■
■
■
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Indoor, damp conditions, Outdoor
Material
composition
Installation
direction
PROFIS
Steel, 5.8 grade, hot-dip
galvanized (min. 43 µm)
Pre-fastening,
Through-fastening
All
Yes
Material, corrosion
Sales pack
quantity
Item number
1x Anchor rod HITV-F M10x95 assy
10 pc
409551
10 pc
409555
10 pc
409556
5 pc
409560
5 pc
409562
5 pc
409564
5 pc
409565
5 pc
409569
conjunction with Hilti HIT-HY 70
conjunction with the relevant Hilti HIT
injectable adhesive anchoring systems
For embedment depths of 4x - 20x rod
diameter
slabs or walls
Productivity: use of optimum rod length
and diameter saves time and money in
each fastening job
Technical data
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
fresh water
Type of fastening
Material
composition
Installation
direction
PROFIS
Material, corrosion
Pre-fastening,
Through-fastening
Steel, A4 (SS316)
All
Yes
Steel, stainless
ture - min.
HIT-CB
Accessories
HIT-V-R M8x80
HIT-V-R M10x130
HIT-V-R M12x150
HIT-V-R M16x150
HIT-V-R M16x200
HIT-V-R M20x260
HIT-V-R M24x300
Off-the-shelf rods
Anchor rod HIT-V-R
Ordering designation Anchor size Base plate
clearance
hole
Anchor type
Ordering designation Anchor size Base plate clearance hole Wrench size Anchor length Useable thread length Package contents
Package contents
M8
Technical data
ture - min.
HIT-CB
Accessories
Drilling
depth
HIT-V-5.8 M8x80
212
conjunction with the relevant Hilti HIT
injectable adhesive anchoring systems
conjunction with Hilti HIT-HY 70
For embedment depths of 4x - 20x rod
diameter
slabs or walls
Productivity: use of optimum rod length
and diameter saves time and money in
each fastening job
Anchor rod (5.8 carbon steel) HIT-V-5.8
Anchor Base plate
size
clearance
hole
■
ETA 11/0354 for HIT-CT 1 injection mortar for anchoring applications (ETAG 001-05, Option 7)
details.
■
001-05, Option 7)
Yes
Steel, zinc-plated
Option 7)
All
Material, corrosion
Option 7)
Anchor rod HIT-V-F (5.8 hot-dip galvanized)
M8
M10
M12
M16
M16
M20
M24
9 mm
12 mm
14 mm
18 mm
18 mm
22 mm
26 mm
Required
tightening
torque
10 Nm
20 Nm
40 Nm
80 Nm
80 Nm
150 Nm
200 Nm
Wrench
size
13 mm
17 mm
19 mm
24 mm
24 mm
30 mm
36 mm
Anchor
length
80 mm
130 mm
150 mm
150 mm
200 mm
260 mm
300 mm
Useable
thread length
65 mm
113 mm
131 mm
127 mm
177 mm
233 mm
268 mm
Drilling
depth
60 mm
90 mm
Package contents
1x Anchor rod HIT-V-R M8x80 assy
1x Anchor rod HIT-V-R M10x130 assy
110 mm 1x Anchor rod HIT-V-R M12x150 assy
Sales pack
quantity
20 pc
10 pc
10 pc
5 pc
5 pc
5 pc
5 pc
Item
number
387074
387078
387081
387084
387085
387088
387152
213
9
Anchor Systems
Anchor Systems
Approvals
Technical data
■
■
■
■
concrete made with Hilti HIT-HY 200
Seismic anchoring applications
(e.g. bracing of reinforced concrete
buildings)
Very high loads in cracked concrete and
seismic applications according to ICCES and ETA C2 approvals
Safe and productive solution thanks to
elimination of the hole cleaning process
ETA, Seismic
001-05, Option 1)
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Approvals / test
reports
Material
composition
Installation
direction
Tested/approved
PROFIS
ETA
ICC-ES
5 µm)
details.
Material, corrosion
Pre-fastening,
Through-fastening
All
Anchor rod (stainless metric) Hilti HIT-Z-R
■
001-05, Option 1)
■
■
■
concrete made with Hilti HIT HY200
For applications where shallow embedment is needed
Very high loads in cracked concrete
Very productive solution that saves
cleaning time
Technical data
Anchor type
Off-the-shelf rods
Head configuration
Externally threaded
Environmental
conditions
fresh water
Type of fastening
Approvals / test
reports
Material
composition
Installation
direction
Tested/approved
PROFIS
Yes
Yes
Steel, zinc-plated
Material, corrosion
size
HIT-Z-R M8x80
Anchor rod (carbon steel) HIT-Z
Ordering
designation
Anchor
size
Base plate
clearance
hole
HIT-Z M8x80
M8
9 mm
HIT-Z M10x95
M10
HIT-Z M12x105 M12
12 mm
14 mm
Baseplate
clearance hole
pre-fastening
Base plate
clearance
hole throughfastening
Required
tightening
torque
Wrench
size
Anchor
length
Package contents
Sales pack
quantity
12 mm
11 mm
14 mm
10 Nm
80 mm
1x Anchor rod HIT-Z M8x80 assy
40 pc
2018364
16 mm
25 Nm
13 mm
40 Nm
19 mm
105
mm
20 pc
2018411
9 mm
14 mm
17 mm
HIT-Z M12x196 M12
14 mm
14 mm
16 mm
40 Nm
19 mm
HIT-Z M16x155 M16
18 mm
18 mm
20 mm
80 Nm
24 mm
HIT-Z M16x205 M16
18 mm
18 mm
20 mm
80 Nm
24 mm
HIT-Z M20x215 M20
22 mm
22 mm
24 mm
150 Nm
30 mm
HIT-Z M20x250 M20
22 mm
22 mm
24 mm
150 Nm
30 mm
214
95 mm
40 pc
Item
number
2018367
196
mm
20 pc
2018415
155
mm
12 pc
2018416
205
mm
12 pc
2018418
215
mm
6 pc
2018420
250
mm
6 pc
2018421
M8
Baseplate
clearance hole
pre-fastening
9 mm
Base plate
Required
clearance
tightening
hole through- torque
fastening
11 mm
10 Nm
Wrench
size
13 mm
Anchor
length
80 mm
Useable
thread
length
8 mm
HIT-Z-R M10x95
M10
12 mm
14 mm
25 Nm
17 mm
95 mm
22 mm
HIT-Z-R M10x160
M10
12 mm
14 mm
25 Nm
17 mm
160 mm
87 mm
HIT-Z-R M12x105
M12
14 mm
16 mm
40 Nm
19 mm
105 mm
29 mm
HIT-Z-R M12x155
M12
14 mm
16 mm
40 Nm
19 mm
155 mm
79 mm
HIT-Z-R M16x155
M16
18 mm
20 mm
80 Nm
24 mm
155 mm
38 mm
HIT-Z-R M16x240
M16
18 mm
20 mm
80 Nm
24 mm
240 mm
123 mm
HIT-Z-R M20x215
M20
22 mm
24 mm
150 Nm
30 mm
215 mm
91 mm
Package contents
Pre-fastening,
Through-fastening
ETA
Steel, A4 (SS316)
All
Yes
Yes
Steel, stainless
Sales pack
quantity
1x Anchor rod HIT-Z-R M8x80 assy 40 pc
assy
assy
assy
assy
assy
assy
assy
Item
number
2018422
40 pc
2018425
40 pc
2018428
20 pc
2018429
20 pc
2018431
12 pc
2018434
12 pc
2018437
6 pc
2018438
9
215
Anchor Systems
Anchor Systems
Technical data
■
■
■
Suitable for internally threaded fastenings in concrete with various Hilti injectable adhesives and Hilti HVU capsules
Internally threaded, allowing flush installation and easy removal of bolts
Roof-shaped tip for cutting and mixing
the Hilti HVU capsule (to be installed
with HIS-S setting tool)
Approvals
ETA
Anchor type
Internally threaded
Head configuration
Inner thread
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
PROFIS
Material, corrosion
Steel, zinc-plated
7)
Pre-fastening
All
ETA, Seismic
Yes
Option 7)
Option 1)
ture - min.
injection mortar and standard
elements for anchoring applications (ETAG 001-05, Option 1)
details.
Internal threaded sleeve (metric) HIS-N
size
Thread engagement
depth - max.
Thread engagement
depth - min.
HIS-N M8x90
M8
20 mm
8 mm
HIS-N M12x125
M12
30 mm
12 mm
HIS-N M10x110
HIS-N M16x170
HIS-N M20x205
M10
25 mm
M16
40 mm
M20
50 mm
10 mm
Base plate
clearance
hole
Outside
diameter
Anchor
length
Package contents Sales pack
quantity
Item
number
9 mm
13 mm
90 mm
90 mm
1x Cap HIS M8
258015
14 mm
21 mm
125 mm
125 mm
1x Cap HIS M12 5 pc
12 mm
16 mm
18 mm
20 mm
22 mm
17 mm
25 mm
28 mm
110 mm
170 mm
205 mm
Technical data
Option 7)
110 mm
10 pc
1x Cap HIS M10 10 pc
170 mm
1x Cap HIS M16 5 pc
205 mm
1x Cap HIS M20 5 pc
258016
258017
■
■
■
Suitable for applications in hollow base
materials in combination with Hilti HITHY 70, HIT-MM PLUS or HFX
Typical applications include sun blinds,
awnings, electrical installations, sanitary
installations, handrails, banisters, railings, window gratings, gates
Standard 50 mm and 85 mm lengths
can be used individually or clicked
together for deeper embedment
applications
Simply push the anchor rod into the
sleeve
■
■
Internally threaded, for flush installation
and easy removal of bolts
Chisel-shaped end to cut and mix the
Hilti HVU capsule (to be installed with
HIS-S setting tool)
Anchor Internal
size
thread size
Thread engagement
depth - max.
Thread engagement
depth - min.
HIS-RN M8x90 A4
M8
8 mm
20 mm
8 mm
HIS-RN M12x125 A4
M12
12 mm
30 mm
12 mm
HIS-RN M10x110 A4
HIS-RN M16x170 A4
HIS-RN M20x205 A4
216
M10
M16
M20
10 mm
16 mm
20 mm
25 mm
40 mm
50 mm
10 mm
16 mm
20 mm
Base plate
clearance
hole
Internally threaded
Head configuration
Inner thread
Environmental
conditions
fresh water
Material
composition
Installation
direction
PROFIS
Steel, A4 (SS316)
Outside diameter
Anchor length
Drilling depth
Package contents
HIT-SC 12x85
12 mm
14 mm
85 mm
95 mm
1x Mesh sleeve HIT SC 12X85
20 pc
375980
HIT-SC 22x85
22 mm
24 mm
85 mm
95 mm
1x Mesh sleeve HIT-SC 22x85
10 pc
284511
HIT-SC 16x85
16 mm
18 mm
85 mm
1x Mesh sleeve HIT SC 16X85
Material, corrosion
Steel, stainless
■
■
■
Suitable for use in hollow blocks in
conjunction with HIT-HY 70, HIT-MM
PLUS and HFX
Can be cut with HIT-SMC 25 mesh
sleeve scissors
Designed for use in materials with large
cavities for good mortar distribution and
thus good load transfer
In meter lengths, for cutting to size on
site
HIT-S 16x1M
16
1000 mm
HIT-S 22x1M
1x Cap HIS M8
258024
14 mm
21 mm
125 mm 1x Cap HIS M12 5 pc
10 pc
Sales pack
quantity
Item number
375982
20 pc
Metal mesh sleeve HIT-S 1m (finely woven)
Yes
90 mm
95 mm
Anchor length
13 mm
28 mm
Plastic
Anchor size
9 mm
22 mm
No
Item
number
25 mm
All
All
Package contents Sales pack
quantity
18 mm
Plastic
Pre-fastening
Anchor
length
17 mm
Material
composition
Installation
direction
LEED information
available
Material, corrosion
Anchor size
258019
Anchor type
Pre-fastening
258018
Outside
diameter
12 mm
facades, Outdoor, Underwater, fresh water
■
Technical data
Type of fastening
Environmental
conditions
Composite mesh sleeve HIT-SC
Internally-threaded sleeve (metric stainless) HIS-RN
Mesh sleeve
Type of fastening
■
Anchor type
22
1000 mm
Technical data
Anchor type
Mesh sleeve
Environmental
conditions
facades, Outdoor
Type of fastening
Material
composition
Installation
direction
LEED information
available
Material, corrosion
Pre-fastening
All
No
Steel, zinc-plated
Sales pack
quantity
50 pc
25 pc
9
Steel, zinc-plated
Item number
49763
49764
258025
258026
258027
258028
217
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Dispenser, setting
tool, accessory,
tester type
Battery type
Dispensers
Dispenser type
Battery
Power source type
Compact B22/1.6 or
B22/3.3 battery
for fastening anchor rods and rebars in
Serial fastenings and/or injection in
deep holes
No need for external power source
supply
Easy injection even at low temperatures
Dose adjustment knob for accurate and
controlled dispensing
Technical data
Dispenser, setting
tool, accessory,
tester type
22 V
■
For use with all Hilti 3:1 adhesive foils
Cartridge holder HIT-CB 500
Package contents
■
HDE 500-A22 CR/CB cas 2.2 kg 1x Dispenser HDE 500-A22 EU assy, 1x Cassette 500ml black, 1x Cassette 500ml red, 1x
Case
Sales pack
quantity
1 pc
■
■
HDM 500 box
HDM V02 empty
218
Easy and fast foil pack loading
Ruggedly built to withstand tough jobsite conditions
Dispenser, setting
tool, accessory,
tester type
Dispenser type
■
Item number
3504617
1x Dispenser HDM 500 assy, 1x Round brush 13MM HG, 1x Round brush 1 pc
18MM HG, 1x Round brush 28MM HG, 1x Blow-out pump, 1x Cassette
500ml black, 1x Cassette 500ml red, 1x Case
3504619
1.8 kg 1x Dispenser HDM 500 assy
2.2 kg
1x Cassette 330ml red
1 pc
1 pc
1x Cassette 500ml red
Manual
1 pc
1x Dispenser HDM 500 assy, 1x Cassette 500ml black, 1x Cassette
500ml red
Technical data
Dispenser, setting
tool, accessory,
tester type
Other accessories
Sales pack
quantity
1 pc
Item number
2007058
2007059
1 pc
Accessories for blowing out drilled holes Hilti HIT
Dispensers
Sales pack
quantity
For use with 5:1 red cartridges (e.g. Hilti
HIT-HY 200) HIT-HY 200)
Package contents
Cartridge holder HIT-CR 500
Technical data
HIT KIT HDM 500 red/black,pump,3xbrush
2007056
2007057
1 pc
2005637
Cartridge holder HIT-CR 330
HDM 500 Dispenser red/black
1 pc
Item number
Item number
Dispenser HDM
Sales pack
quantity
Cartridge holder Hilti HIT-CR
Dispenser HDE 500-A22
Other accessories
For fast and efficient removal of dust
and debris from drilled holes of varying
diameters and depths to allow correct
installation of anchors and rebar
Technical data
Dispenser, setting
tool, accessory,
tester type
Cleaning accessories
Sales pack
quantity
Blow-out pump
1 pc
Item number
60579
2005641
2051634
219
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
for fastening anchor rods and rebar in
For use with 1400 ml Hilti HIT foil packs
Dispensing system for accurate hole
filling
Robust dispensers for tough jobsite
conditions
Dispenser, setting
tool, accessory,
tester type
Dispenser type
Dispensers
Optimal air flow
rate
Power source type
250 l/min
Technical data
Dispenser, setting
tool, accessory,
tester type
Pneumatic
Anchor testers and
accessories
Compressed air
■
■
■
■
■
Proof loading: application of specific
test loads to anchors set in various
materials
Pull-out tests: Determination of pull-out
resistance of anchors and DX fasteners
in the test lab or on site
Testing hoist anchor points in elevator
shafts
Compact and easy-to-use
Test load can be read directly from the
gauge
Tensile testing system HAT 28
Weight
Package contents
P 8000 D
6.2 kg
1x Dispenser P 8000 D assy, 1x Cassette VIC printed, 1x Carrying device P 8000 D
Sales pack
quantity
1 pc
Item number
■
Mixer HIT-RE-M
Mixer HFX-M
Mixer HIT-M1 assy
Mixing nozzles for Hilti HIT adhesive
cartridges
Package contents
1x Mixer
1x Mixer
Technical data
Dispenser, setting
tool, accessory,
tester type
Mixing nozzles and
injection accessories
Sales pack
quantity
1 pc
10 pc
100 pc
Gauge
Gauge
accuracy
373959
Mixers and extensions Hilti HIT
Ordering
designation
Item number
HAT 28 M kit Strain ± 2.5%
gauge
0-5
kN/025 kN
with
max.
load
indicator
Maximum
test
load
25 kN
Effective
Maximum
span of
tensile
loadstroke
spreading
bridge
118 mm
337111
284267
50 mm
Weight
incl.
bridge
assy.
Package contents
Sales
pack
quantity
Item
number
4 kg
1x Tensile tester HAT 28 assy, 1x Manometer 0-5kN C HAT 28
assy, 1x Manometer 0-25kN C HAT28 assy, 1x Load spreading
bridge 150 assy, 1x Set of screws M6, M8, M10, M12, M16, 1x
Allen wrench 2.5,3 set, 1x Adjustable end wrench 0-29 assy, 1x
Adapter 4.5, 5.5, 6.5, 8.5, 10.5, 12.5, 1x Adapter 1/4”, 5/16”,
3/8”, 1/2” set, 1x Adapter M4, M5, M6, M8, M10, M12 set, 1x
Adapter scaffold ringbolt, 1x Adapter M5, 1x Adapter M6, 1x
Adapter M8, 1x Adapter M10, 1x Adapter M12, 1x Adapter M16,
1x Adapter M20, 1x Adapter X-IE, 1x Threaded brace foot 50
set, 1x Threaded brace foot HAT 28 100 set, 1x Pivot foot set,
1x Case
1 pc
355338
Technical data
68156
Dispenser, setting
tool, accessory,
tester type
Battery type
Anchor testers and
accessories
Power source type
9 V battery
9
1x9V
■
■
■
Proof loading: application of specific
test loads to anchors set in various
materials
Compact and easy-to-use digital tester
powered by a 9V battery
Loads can be read directly from the
digital gauge
Anchor testing tool DPG 100
Ordering designation Gauge
DPG 100
220
Gauge accuracy
Maximum
test load
Digital display Typical accuracy of ± 0.3 kN 100 kN
Max.
allowable
load
100 kN
Sales pack
quantity
3 kg
1 pc
1x Coupling M6, 1x Coupling M8, 1x Coupling M10, 1x Coupling M12, 1x Coupling
M16, 1x Coupling M20, 1x Coupling M24,
3x Threaded rod M6X35, 3x Threaded
rod M8X35, 3x Threaded rod M10X45, 1x
Threaded rod M12X120, 1x Threaded rod
M 16X160, 1x Threaded rod M20X190, 1x
Threaded rod M24X240, 1x Anchor tester
DPG 100, 1x Case
Item
number
59999
221
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
Safety-relevant, heavy-duty fastenings
for all dynamic loading (shock, seismic
and fatigue) in cracked or uncracked
concrete, including applications in
nuclear power plants
Fastenings to support heavy pipes,
safety barriers, industrial machines,
crane rails, dorm structures, crash barriers, roof fixings, elevator tracks, bridge
retrofitting etc.
Combines the flexibility and immediate
loading of a post-installed mechanical
anchor with the performance of a castin-place headed stud
Close spacing and small edge distance
because of low expansion forces
Approvals
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
IBC compliance
Bolt: steel, 8.8 grade,
zinc-plated (min. 5 µm)
PROFIS
Yes
ETA
ICC-ES report
(concrete)
Pre-fastening
Material, corrosion
■
ICC-ES ESR-1546 for HDA selfcutting undercut anchor
details.
All
LEED information
available
Additional product
information
ETA 99/0009 for HDA self-cutting
undercut anchor (ETAG 001-03,
Option 1)
Setting tool TE-C-HDA-ST
IBC 2003, IBC 2006,
IBC 2009, IBC 2012
Yes
TE-C-HDA-ST22-M12
TE-C-HDA-ST 20-M10
Required for the automatic selfundercutting operation with the HDA
undercut anchor
Connection end
Package contents
TE-C
1x Setting tool ST20 -M10/C
TE-C
1x Setting tool ST22-M12/C
■
Steel, zinc-plated
TE-Y-HDA-ST 37-M20
TE-Y-HDA ST 30-M16
Undercut anchor HDA-P
Required for the automatic selfundercutting operation with the HDA
undercut anchor
Connection end
Package contents
TE-Y
1x Setting tool HDA M20
TE-Y
1x Setting tool ST30-M16/Y
Base plate
clearance
hole
Required
tightening
torque
Wrench
size
Washer
size
Anchor length Length
identification
mark
HDA-P M10x100/20 M10
12 mm
50 Nm
17 mm
27 mm
150 mm
I
HDA-P M12x125/50 M12
14 mm
80 Nm
19 mm
32 mm
210 mm
N
Package contents
Sales pack
quantity
Item
number
1x Undercut anchor HDA-P
M10/20 assy
12 pc
331544
8 pc
331547
1x Undercut anchor HDA-P
M12/50 assy
Carbon steel through-set undercut anchor HDA-T
■
■
■
■
Anchor
size
Safety-relevant, heavy-duty fastenings
for all dynamic loading (shock, seismic
and fatigue) in cracked or uncracked
concrete, including applications in
nuclear power plants
Fastenings to support heavy pipes,
safety barriers, industrial machines,
crane rails, dorm structures, crash barriers, roof fixings, elevator tracks, bridge
retrofitting etc.
Combines the advantages of a postinstalled mechanical anchor, i.e. flexibility and immediate loading, with the
performance of a cast-in-place headed
stud
Close spacing and small edge distance
thanks to low expansion forces
Base plate
clearance hole
Required tightening torque
HDA-T M12x125/30 M12
23 mm
HDA-T M16x190/40 M16
32 mm
HDA-T M10x100/20 M10
222
21 mm
50 Nm
Setting tools
Sales pack
quantity
Item number
331843
1 pc
331844
1 pc
Technical data
Dispenser, setting
tool, accessory,
tester type
Setting tools
Sales pack
quantity
Item number
339269
1 pc
331846
1 pc
Stop drill bit TE-C-HDA-B
Anchor
size
Dispenser, setting
tool, accessory,
tester type
Setting tool TE-Y-HDA-ST
Manufactured under a
nuclear quality assurance program according
to ASME NQA-1 and
10CFR50 App. B
Technical data
Socket
size
Wrench
size
Washer
size
Technical data
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
IBC compliance
Bolt: steel, 8.8 grade,
zinc-plated (min. 5 µm)
PROFIS
Yes
17 mm 17 mm
27 mm
150 mm
80 Nm
19 mm
32 mm
190 mm
120 Nm
24 mm
45 mm
275 mm
TE-C
TE-C-HDA-B 20x120
TE-C
Dispenser, setting
tool, accessory,
tester type
Stop drill bits
Sales pack
quantity
Item number
332089
1 pc
332090
1 pc
Stop drill bit TE-Y-HDA-B
■
Steel, zinc-plated
1x Undercut anchor HDA-T
M16/40 assy
TE-C-HDA-B 20x100
Technical data
Drilling HDA anchor holes to the defined
depth
Technical data
Dispenser, setting
tool, accessory,
tester type
Stop drill bits
IBC 2003, IBC 2006,
IBC 2009, IBC 2012
Material, corrosion
M12/30 assy
Connection end
All
Yes
M10/20 assy
Drilling HDA anchor holes to a defined
depth
Through-fastening
LEED information
available
Additional product
information
Anchor length Package contents
■
Meets approval requirements when installed
using the specified stop
drill bit, setting tool and
rotary hammer
Sales pack
quantity
TE-Y-HDA-B 30x190
TE-Y-HDA-B 30x230
TE-Y-HDA-B 37x300
Connection end
TE-Y
TE-Y
TE-Y
Sales pack
quantity
1 pc
1 pc
1 pc
Item number
332097
332098
339271
Item
number
12 pc
331545
8 pc
331548
4 pc
331552
223
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Heavy-duty fastenings in high safetyrelevant or dynamic applications,
including applications in nuclear power
plants
Applications where extensive approval
back-up or technical back-up is required, e.g machines, heavy equipment,
steel columns, heavy pipe supports,
pumps, beam supports, medical equipment, cantilevers, cranes, car hoists,
etc.
Heavy-duty applications e.g machines,
heavy equipment, steel columns, heavy
pipe supports, pumps, beam supports,
medical equipment, cantilevers, cranes,
car hoists, etc.
High tension and shear load capacities
Force-controlled expansion which allows follow-up expansion
Approvals
ETA
Head configuration
Hex head
Environmental
conditions
Type of fastening
Material
composition
5 µm), Bolt: steel, 8.8
grade, zinc-plated (min.
5 µm)
Through-fastening
ETA 02/0042 for HSL-3 heavyduty expansion anchor (ETAG
001-02, Option 1)
Heavy-duty anchor HSL-3-SK
■
details.
■
Yes, with DD-EC 1
Tested/approved
IBC 2003, IBC 2006,
IBC compliance
■
PROFIS
■
IBC 2009, IBC 2012
Yes
LEED information
available
Additional product
information
Yes
Material, corrosion
Steel, zinc-plated
■
to ASME NQA-1 and
10CFR50 App. B
size
Anchor
length
HSL-3-SK M8/10
80 mm
14 mm
25 Nm
HSL-3-SK M10/20 M10
102 mm
17 mm
HSL-3-SK M12/25 M12
120 mm
20 mm
M8
Base plate
clearance
hole
Fastenings in safety-relevant and/or
dynamic applications where a flush installation or neat appearance is required
Including applications in nuclear power
plants
Applications where extensive approval back-up or technical back-up is
required
Various uses such as for medical equipment, hand rails, machines, car hoists,
safety fences, pumps, etc.
Esthetic appearance and no tripping
hazard due to flush installation
High tension and shear load capacity
Force-controlled expansion which allows follow-up expansion
Required
tightening
torque
Socket
size
Technical data
Head configuration
Countersunk
Environmental
conditions
Type of fastening
Material
composition
5 µm), Bolt: steel, 8.8
grade, zinc-plated (min.
5 µm)
Through-fastening
No
Tested/approved
IBC 2003, IBC 2006,
IBC compliance
PROFIS
IBC 2009, IBC 2012
Yes
LEED information
available
Additional product
information
Yes
Material, corrosion
Steel, zinc-plated
Drilling
depth
Package contents
5 mm
Max. fixture thickness at standard
embedment depth
10 mm
80 mm
50 Nm
6 mm
20 mm
90 mm
1x Heavy-duty anchor HSL-3-SK
M8/10 assy
80 Nm
8 mm
25 mm
105
mm
M10/20 assy
M12/25 assy
to ASME NQA-1-2000
and 10CFR50 App. B
Sales
pack
quantity
Item
number
40 pc
371825
20 pc
371827
20 pc
371828
Heavy-duty expansion anchor HSL-3
Ordering
designation
Anchor
size
Anchor
length
Base plate
clearance
hole
Required
tightening
torque
Wrench
size
HSL-3 M8/20
M8
98 mm
14 mm
25 Nm
13 mm
HSL-3 M8/40
M8
118 mm
14 mm
25 Nm
HSL-3 M10/20
M10
110 mm
17 mm
HSL-3 M10/40
M10
130 mm
HSL-3 M12/25
M12
HSL-3 M12/50
Drilling
depth
Package contents
Sales
pack
quantity
Item
number
20 mm
80 mm
40 pc
371775
13 mm
40 mm
80 mm
1x Heavy-duty anchor HSL-3 M 8/20
assy
40 pc
371776
50 Nm
17 mm
20 mm
90 mm
assy
20 pc
371778
17 mm
50 Nm
17 mm
40 mm
90 mm
assy
20 pc
371779
131 mm
20 mm
80 Nm
19 mm
25 mm
105 mm
assy
20 pc
371781
M12
156 mm
20 mm
80 Nm
19 mm
50 mm
105 mm
assy
10 pc
371782
HSL-3 M16/25
M16
153 mm
26 mm
120 Nm
24 mm
25 mm
125 mm
assy
10 pc
371784
HSL-3 M16/50
M16
178 mm
26 mm
120 Nm
24 mm
50 mm
125 mm
assy
10 pc
371785
HSL-3 M20/30
M20
183 mm
31 mm
200 Nm
30 mm
30 mm
155 mm
assy
6 pc
371787
HSL-3 M20/60
M20
213 mm
31 mm
200 Nm
30 mm
60 mm
155 mm
assy
assy
6 pc
371788
224
Max. fixture
thickness at
9
225
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Particularly suitable for safety relevant
applications
Facades
Structural steel
High-performance stud anchor. The
optimised design of the expansion
pieces and tapered section combined
with special steel and coatings ensure
outstanding performance in cracked
and uncracked concrete
Suitable for applications in cracked
concrete
Approvals
Head configuration
Externally threaded
ETA, Seismic
Environmental
conditions
Type of fastening
details.
Material
composition
Installation
direction
Tested/approved
PROFIS
5 µm)
Pre-fastening,
Through-fastening
Technical data
ETA 98/0001 for HST stud anchor (ETAG 001-02, Option 1)
All
■
■
■
■
No
Yes
LEED information
available
Material, corrosion
Yes
Accessories
HSV/ HSA/ HST/ KB3/
KB-TZ
■
Steel, zinc-plated
Fastening facade brackets
Fastening columns and beams
Fastening brackets and channels
High loads (optimal utilization of concrete strength)
3 embedment depths offering maximum
flexibility
Approvals
Head configuration
Externally threaded
ETA
Environmental
conditions
Type of fastening
details.
Material
composition
Installation
direction
Tested/approved
PROFIS
5 µm)
Pre-fastening,
Through-fastening
ETA 11/0374 for HSA stud anchor (ETAG 001-02, Option 7)
All
Yes
Yes
LEED information
available
Material, corrosion
Yes
Accessories
HSV/ HSA/ HST/ KB3/
KB-TZ
Steel, zinc-plated
Standard stud anchor HSA
Stud anchor HST
HST M8X75/10
HST M8x95/30
HST M8X115/50
HST M10X90/10
HST M10x110/30
HST M10X130/50
HST M10x160/80
HST M12X115/20
HST M12X145/50
Anchor
size
M8
M8
M8
M10
M10
M10
M10
M12
M12
HST M12X185/90
M12
HST M16X140/25
M16
HST M12X235/140 M12
HST M16X165/50
M16
HST M16X215/100 M16
HST M16X255/140 M16
HST M20X170/30
HST M20X200/60
HST M24X200/30
HST M24X230/60
M20
M20
M24
M24
Anchor
length
75 mm
Base plate
clearance
hole
9 mm
95 mm
9 mm
90 mm
12 mm
115 mm 9 mm
110 mm 12 mm
130 mm 12 mm
160 mm 12 mm
115 mm 14 mm
145 mm 14 mm
185 mm 14 mm
235 mm 14 mm
140 mm 18 mm
165 mm 18 mm
215 mm 18 mm
255 mm 18 mm
170 mm 22 mm
200 mm 22 mm
200 mm 26 mm
230 mm 26 mm
Required
tightening
torque
20 Nm
20 Nm
20 Nm
45 Nm
45 Nm
45 Nm
45 Nm
60 Nm
60 Nm
60 Nm
60 Nm
110 Nm
110 Nm
110 Nm
110 Nm
240 Nm
240 Nm
300 Nm
300 Nm
Wrench/
nut size
13 mm
13 mm
13 mm
17 mm
17 mm
17 mm
17 mm
19 mm
19 mm
19 mm
19 mm
24 mm
24 mm
24 mm
24 mm
30 mm
30 mm
36 mm
36 mm
Socket
size
13 mm
13 mm
13 mm
17 mm
17 mm
17 mm
17 mm
19 mm
19 mm
19 mm
19 mm
24 mm
24 mm
24 mm
24 mm
30 mm
30 mm
36 mm
36 mm
Wrench
size
Package contents
Sales
pack
quantity
13 mm 1x Safety stud anchor HST M8X75 assy
100 pc
17 mm 1x Safety stud anchor HST M10x160 assy
80 pc
50 pc
50 pc
40 pc
25 pc
25 pc
25 pc
25 pc
25 pc
25 pc
12 pc
12 pc
12 pc
12 pc
5 pc
5 pc
5 pc
5 pc
Item
number
371581
295378
371583
371584
295367
371586
272727
371587
371588
371589
371591
371593
371594
371595
371596
371598
371599
371601
371602
Ordering
designation
Anchor
size
Anchor
length
HSA M6x65
20/10/-
M6
HSA M6 x 85
40/30/10
HSA M8x55
5/-/-
HSA M8x70
20/10/-
HSA M8x85
35/25/-
HSA M8x130
80/70/40
HSA M10x68
5/-/-
HSA M10x83
20/10/-
HSA M10x98
35/25/-
HSA M10x168
105/95/65
HSA M12x85
5/-/-
HSA M12x100
20/5/-
HSA M12x115
35/20/-
HSA M12x145
65/50/15
HSA M12x175
95/80/45
HSA M12x225
145/130/95
HSA M16x102
5/-/-
HSA M16x117
20/5/-
HSA M16x137
40/25/-
HSA M16x182
85/70/30
HSA M16x232
135/120/80
HSA M20x125
10/-/-
HSA M20x170
55/30/-
226
65 mm
Base plate
clearance
hole
7 mm
Required
tightening
torque
Socket
size
Wrench
size
Thread
length
Package contents
M6
85 mm
M8
5 Nm
10 mm
10 mm
30 mm
1x Std stud anchor HSA M6 20/10/- assy
200 pc
2036085
7 mm
5 Nm
10 mm
10 mm
50 mm
1x Std stud anchor HSA M6 40/30/10 assy
100 pc
2036086
55 mm
9 mm
15 Nm
13 mm
13 mm
14 mm
1x Std stud anchor HSA M8 5/-/- assy
100 pc
2004122
M8
70 mm
9 mm
15 Nm
13 mm
13 mm
29 mm
100 pc
2004123
M8
85 mm
9 mm
15 Nm
13 mm
13 mm
44 mm
80 pc
2004124
M8
130 mm 9 mm
15 Nm
13 mm
13 mm
89 mm
50 pc
2004126
M10
68 mm
12 mm
25 Nm
17 mm
17 mm
16 mm
50 pc
2004127
M10
83 mm
12 mm
25 Nm
17 mm
17 mm
31 mm
50 pc
2004128
M10
98 mm
12 mm
25 Nm
17 mm
17 mm
46 mm
40 pc
2004129
M10
168 mm 12 mm
25 Nm
17 mm
17 mm
25 pc
2004153
M12
85 mm
14 mm
50 Nm
19 mm
19 mm
116
mm
18 mm
25 pc
2004154
M12
100 mm 14 mm
50 Nm
19 mm
19 mm
33 mm
25 pc
2004155
M12
115 mm 14 mm
50 Nm
19 mm
19 mm
48 mm
25 pc
2004156
M12
145 mm 14 mm
50 Nm
19 mm
19 mm
78 mm
25 pc
2004157
M12
175 mm 14 mm
50 Nm
19 mm
19 mm
25 pc
2004158
M12
225 mm 14 mm
50 Nm
19 mm
19 mm
108
mm
25 pc
2004160
M16
102 mm 18 mm
80 Nm
24 mm
24 mm
22 mm
16 pc
2004161
M16
117 mm 18 mm
80 Nm
24 mm
24 mm
37 mm
16 pc
2004162
M16
137 mm 18 mm
80 Nm
24 mm
24 mm
57 mm
16 pc
2004163
M16
182 mm 18 mm
80 Nm
24 mm
24 mm
16 pc
2004164
M16
232 mm 18 mm
80 Nm
24 mm
24 mm
102
mm
16 pc
2004165
M20
125 mm 22 mm
200 Nm
30 mm
30 mm
48 mm
10 pc
2036088
M20
170 mm 22 mm
200 Nm
30 mm
30 mm
88 mm
10 pc
2036089
158
mm
152
mm
Sales
pack
quantity
Item
number
227
9
Anchor Systems
Anchor Systems
Standard hot-dip galvanized stud anchor HSA-F
Standard stud anchor HSA-R
■
■
■
■
■
concrete
Fast, convenient and reliable torquing
using SIW 14-A or 22-A impact wrench
with S-TB
Suitable for presetting and throughfastening in uncracked concrete
Technical data
Externally threaded
Environmental
conditions
Type of fastening
Indoor, damp conditions
Material
composition
Installation
direction
Tested/approved
LEED information
available
Material, corrosion
Steel, hot-dip galvanized (min. 35 µm)
Accessories
Anchor Anchor
size
length
Base plate
clearance
hole
Required
tightening
torque
Socket
size
Thread
length
Length
identification
mark
HSA-F M8x70 20/10/-
M8
70 mm
9 mm
15 Nm
13 mm 29 mm
w
HSA-F M8x85 35/25/-
M8
85 mm
9 mm
15 Nm
13 mm 44 mm
t
HSA-F M10x68 5/-/-
M10
68 mm
12 mm
25 Nm
17 mm 16 mm
z
HSA-F M10x83 20/10/-
M10
83 mm
12 mm
25 Nm
17 mm 31 mm
w
HSA-F M10x98 35/25/-
M10
98 mm
12 mm
25 Nm
17 mm 46 mm
t
HSA-F M12x100 20/5/-
M12
100 mm
14 mm
50 Nm
19 mm 33 mm
w
HSA-F M12x145
65/50/15
M12
145 mm
14 mm
50 Nm
19 mm 78 mm
n
HSA-F M16x102 5/-/-
M16
102 mm
18 mm
80 Nm
24 mm 22 mm
z
HSA-F M16x182
85/70/30
M16
182 mm
18 mm
80 Nm
24 mm 102 mm
J
HSA-F M20x170 55/30/- M20
170 mm
22 mm
200 Nm
24 mm 88 mm
p
Head configuration
Pre-fastening,
Through-fastening
■
Anchor
size
Anchor
length
Base plate
clearance hole
Required tight- Socket
ening torque
size
Wrench
size
HSV/ HSA/ HST/ KB3/
KB-TZ
Sales
pack
quantity
1x Std stud anchor HSA-F M8
35/25/-
5/-/-
20/10/-
35/25/-
20/5/-
65/50/15
5/-/-
85/70/30
55/30/15 assy
Fastening
thickness at
embed.1
HSA-R2 M8x70
20/10/-
M8
70 mm
9 mm
15 Nm
13 mm
13 mm
20 mm
HSA-R2 M10x83
20/10/-
M10
83 mm
12 mm
25 Nm
17 mm
17 mm
20 mm
HSA-R2 M12x115
35/20/-
M12
115 mm
14 mm
50 Nm
19 mm
19 mm
35 mm
HSA-R2 M16x137
40/25/-
M16
137 mm
18 mm
80 Nm
24 mm
24 mm
85 mm
228
High loads (optimal utilization of the
concrete strength)
flexibility
Yes
20/10/-
High loads (optimal utilization of the
concrete strength)
flexibility
■
■
Yes
Item
number
100 pc
2004114
80 pc
2004115
50 pc
2004118
50 pc
2004119
40 pc
2004170
25 pc
2004173
25 pc
2004175
16 pc
2004177
16 pc
2004179
10 pc
2036313
Standard stud anchor HSA-R2
■
■
■
■
■
All
Package contents
■
■
Technical data
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Outdoor
Material
composition
Installation
direction
Tested/approved
PROFIS
Steel, A2 (SS 304)
Pre-fastening,
Through-fastening
Anchor
size
Anchor
length
Base plate
clearance
hole
HSA-R M6x50
5/-/-
M6
50 mm
7 mm
HSA-R M8x55
5/-/-
M8
55 mm
HSA-R M8x70
20/10/-
M8
HSA-R M8x85
35/25/-
Required
tightening
torque
Socket
size
Technical data
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Outdoor
Material
composition
Installation
direction
Tested/approved
PROFIS
Steel, A4 (SS316)
Pre-fastening,
Through-fastening
All
Yes
Yes
LEED information
available
Material, corrosion
Yes
Accessories
HSV/ HSA/ HST/ KB3/
KB-TZ
Steel, stainless
Wrench
size
Thread
length
Package contents
5 Nm
10 mm 10 mm
15 mm
1x Std stud anchor HSA-R M6 5/-/- assy
200 pc
2036314
9 mm
15 Nm
13 mm 13 mm
14 mm
100 pc
2004197
70 mm
9 mm
15 Nm
13 mm 13 mm
29 mm
1x Std stud anchor HSA-R M8 20/10/- assy
100 pc
2004198
M8
85 mm
9 mm
15 Nm
13 mm 13 mm
44 mm
80 pc
2004199
HSA-R M8x105
55/45/15
M8
105 mm
9 mm
15 Nm
13 mm 13 mm
89 mm
1x Std stud anchor HSA-R M8 55/45/15 assy
50 pc
2004200
HSA-R M10x68
5/-/-
M10
68 mm
12 mm
25 Nm
17 mm 17 mm
16 mm
50 pc
2004201
HSA-R M10x83
20/10/-
M10
83 mm
12 mm
25 Nm
17 mm 17 mm
31 mm
50 pc
2004202
HSA-R M10x113
50/40/10
M10
113 mm
12 mm
25 Nm
17 mm 17 mm
61 mm
1x Std stud anchor HSA-R M10 50/40/10 assy
40 pc
2004204
HSA-R M12x100
20/5/-
M12
100 mm
14 mm
50 Nm
19 mm 19 mm
33 mm
1x Std stud anchor HSA-R M12 20/5/-
25 pc
2004208
HSA-R M12x115
35/20/-
M12
115 mm
14 mm
50 Nm
19 mm 19 mm
48 mm
1x Std stud anchor HSA-R M12 35/20/-
25 pc
2004209
HSA-R M16x102
5/-/-
M16
102 mm
18 mm
80 Nm
24 mm 24 mm
22 mm
16 pc
2004214
HSA-R M16x137
40/25/-
M16
137 mm
18 mm
80 Nm
24 mm 24 mm
57 mm
16 pc
2004216
HSA-R M16x182
85/70/30
M16
182 mm
18 mm
80 Nm
24 mm 24 mm
102 mm 1x Std stud anchor HSA-R M16 85/70/30 assy
16 pc
2004217
HSA-R M20x125
10/-/-
M20
125 mm
22 mm
200 Nm
30 mm 30 mm
45 mm
10 pc
2036317
Sales
pack
quantity
Item
number
Torque bar S-TB
All
Yes
Ordering
designation
Yes
S-TB HSA M8
LEED information
available
Material, corrosion
Yes
Accessories
HSV/ HSA/ HST/ KB3/
KB-TZ
S-TB HSA M10
Steel, stainless
Package contents
Sales pack
quantity
Item
number
1x Std stud anchor HSA-R2
M8 20/10/- assy
100 pc
2004218
M10 20/10/- assy
50 pc
2004219
M12 35/20/- assy
25 pc
2004221
M16 40/25/- assy
16 pc
2004222
S-TB HSA M12
S-TB HSA M16
Drive connection
Drive head
1/2 in square,
female
1/2 in, square,
male
Black
1/2 in square,
female
1/2 in, square,
male
Black
1/2 in square,
female
1/2 in square,
female
Material coating/
plating/finish
1/2 in, square,
male
Black
1/2 in, square,
male
Black
Material composition
Tool type
Impact-grade chrome
molybdenum steel
Impact tools, SIW Concrete
(uncracked)
Impact-grade chrome
molybdenum steel
(uncracked)
Impact-grade chrome
molybdenum steel
Impact-grade chrome
molybdenum steel
Base material
Connection Sales pack
end size
quantity
Item
number
12.7 mm
1 pc
423774
(uncracked)
12.7 mm
1 pc
423775
12.7 mm
1 pc
423776
(uncracked)
12.7 mm
1 pc
423777
229
9
Anchor Systems
Anchor Systems
Standard stud anchor HSV
■
■
■
Technical data
Wide range of applications in uncracked
concrete
Made from cold-formed carbon steel,
zinc-plated to 5µm
Two embedment depths for a wide
range of fastening thicknesses
Technical data
Head configuration
Externally threaded
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Material, corrosion
5 µm)
Accessories
Ordering
designation
Anchor
size
Anchor
length
HSV M8x75
M8
75 mm
HSV M10x90
M10
90 mm
HSV M10x100
M10
HSV M12x110
Base plate
clearance
hole
All
Steel, zinc-plated
HSV/ HSA/ HST/ KB3/
KB-TZ
Wrench/nut size Socket size Wrench size Package contents
Sales pack
quantity
15 Nm
13 mm
13 mm
13 mm
100 pc
2041604
12 mm
30 Nm
17 mm
17 mm
17 mm
1x Std stud anchor HSV
M8x75 assy
50 pc
2041605
100 mm
12 mm
30 Nm
17 mm
17 mm
17 mm
M10x90 assy
50 pc
2041606
M12
110 mm
14 mm
50 Nm
19 mm
19 mm
19 mm
M10x100 assy
30 pc
2041608
HSV M12x120
M12
120 mm
14 mm
50 Nm
19 mm
19 mm
19 mm
M12x110 assy
30 pc
2041609
HSV M16x120
M16
120 mm
18 mm
100 Nm
24 mm
24 mm
24 mm
M12x120 assy
16 pc
2041611
HSV M16x140
M16
140 mm
18 mm
100 Nm
24 mm
24 mm
24 mm
M16x120 assy
M16x140 assy
16 pc
2041612
9 mm
Required
tightening
torque
Pre-fastening,
Through-fastening
Item number
Machine setting tool for stud anchors HSV/ HSA/
HST/ KB3/ KB-TZ
Package contents
Setting tool HS-SC 150
1x Setting tool HS-SC 150
■
■
■
■
For medium-duty loads with anchor
bolts and threaded rods, e.g. suspension systems for pipes, air ducts,
sprinkler systems etc.
For redundant fastening applications
in cracked concrete or single-point applications in uncracked concrete
“Intelligent” stepped expansion cone allows easy, correct setting even in harder
materials
Available in a variety of sizes for maximum suitability for a wide range of of
applications
1 pc
Item number
337918
Inner thread
ETA
Environmental
conditions
Type of fastening
ETA, Fire
resistance
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
5 µm)
Material, corrosion
Steel, zinc-plated
Accessories
HSD-G M10 3/8”X30
Installation tools
TE 4-A22
Pre-fastening
All
ETA 02/0032 for HKD drop-in
anchor (ETAG 001-04, Option 7)
ETA 06/0047 for HKD drop-in
anchor multiple applications
(ETAG 001-06, Option -)
details.
Yes
Yes
Drop-in (flush) anchor HKD
Internal
thread
size
HKD M6x25
6 mm
HKD M8x25
8 mm
HKD M6x25 bucket
Sales pack
quantity
Approvals
Head configuration
HKD M8x25 bucket
HKD M8x30 bucket
HKD M10x40
HKD M10x25
6 mm
Thread engagement depth - max.
Base plate
clearance hole
13 mm
7 mm
4 Nm
9 mm
8 Nm
13 mm
8 mm
8 mm
10 mm
15 Nm
12 mm
15 Nm
12 mm
15 Nm
12 mm
HKD M10x40 bucket 10 mm
16 mm
8 Nm
12 mm
HKD M16x65
8 Nm
9 mm
10 mm
12 mm
4 Nm
9 mm
HKD M12x50
7 mm
15 Nm
12 mm
31 mm
Max.
Anchor
tightening length
torque
15 Nm
14 mm
35 Nm
18 mm
60 Nm
Thread
length
Package contents
25 mm
12 mm
1x Flush anchor HKD M6x25 assy
100 pc
376894
25 mm
12 mm
100 pc
376957
25 mm
25 mm
30 mm
40 mm
25 mm
25 mm
30 mm
40 mm
50 mm
65 mm
12 mm
12 mm
15 mm
18 mm
12 mm
12 mm
13 mm
18 mm
22 mm
31 mm
Sales
pack
quantity
1000 pc
500 pc
500 pc
50 pc
376960
376967
500 pc
376966
50 pc
376958
2037453
500 pc
376956
100 pc
500 pc
Item
number
25 pc
2037454
378430
378544
382941
Drop-in anchor HKD-SR
Technical data
Head configuration
Inner thread
Outdoor
■
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
Steel, A4 (SS316)
Material, corrosion
Steel, stainless
Accessories
HSD-G M10 3/8”X30
■
■
■
Ordering designation Internal
thread size
HKD-SR M6x25
HKD-SR M8x30
HKD-SR M10x40
HKD-SR M12x50
HKD-SR M16x65
230
6 mm
8 mm
10 mm
12 mm
16 mm
Base plate clearance hole
7 mm
9 mm
12 mm
14 mm
18 mm
bolts and threaded rods, e.g. suspension systems for pipes, air ducts,
For redundant fastening applications
in cracked concrete or single-point applications in uncracked concrete
Available in a variety of sizes for maximum suitability for a wide range of of
applications
Visual check for correct setting when
used with the Hilti setting tool
Max. tightening torque
4 Nm
8 Nm
15 Nm
35 Nm
60 Nm
Anchor
length
25 mm
30 mm
Thread
length
12 mm
1x Anchor HKD-SR M 6X25
18 mm
1x Anchor HKD-SR M10X40
31 mm
15 mm
22 mm
22 mm
18 mm
65 mm
31 mm
Package contents
12 mm
15 mm
40 mm
50 mm
Useable thread
length
Pre-fastening
All
Yes
Yes
Sales pack
quantity
Item
number
100 pc
247951
50 pc
247953
25 pc
247955
1x Anchor HKD-SR M 8 X30
100 pc
50 pc
247952
247954
231
9
Anchor Systems
Anchor Systems
Drop-in anchor HKV
Technical data
■
■
■
■
HKV M6x25
Internal
thread size
6 mm
Thread engagement depth - max.
13 mm
bolts and threaded rods, e.g. suspension systems for pipes, air ducts and
For fastening diamond core drilling rigs/
base plates, M16 only (DD120 and up)
No collar - can be set at greater depth
No damage to the thread when tapping
in and expanding
Technical data
Head configuration
Inner thread
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Material, corrosion
5 µm)
Accessories
HSD-G M10 3/8”X30
Installation tools
TE 4-A22
All
Steel, zinc-plated
Base plate
clearance hole
Max. tightening
torque
Packaging Anchor
length
Package contents
Bag
25 mm
Thread
length
7 mm
3 Nm
13 mm
HKV M8x30
8 mm
9 mm
7 Nm
Bag
30 mm
15 mm
HKV M8x30 bucket
8 mm
9 mm
7 Nm
Bucket
30 mm
18 mm
HKV M10x30
10 mm
12 mm
15 Nm
Bag
30 mm
14 mm
HKV M10x40
10 mm
12 mm
15 Nm
Bag
40 mm
19 mm
HKV M10x40 bucket 10 mm
12 mm
15 Nm
Bucket
40 mm
19 mm
HKV M12x50
Pre-fastening
12 mm
23 mm
14 mm
30 Nm
Bag
50 mm
23 mm
HKV M12x50 bucket 12 mm
23 mm
14 mm
30 Nm
Bucket
50 mm
23 mm
Sales pack
quantity
Item
number
100 pc
384616
1x Flush anchor
HKV M8x30 assy
100 pc
384966
1x Flush anchor
HKV M8x30 assy
500 pc
384967
1x Flush anchor
HKV M10x30
assy
50 pc
384968
1x Flush anchor
HKV M10x40
assy
50 pc
384969
500 pc
384970
1x Flush anchor
HKV M12x50
assy
25 pc
384971
250 pc
384972
1x Flush anchor
HKV M6x25 assy
1x Flush anchor
HKV M10x40
assy
1x Flush anchor
HKV M12x50
assy
■
Length
Working length
Tool type
Suitable for anchor size
HKD-TE-CX M6 1/4”x25
8 mm
142 mm
27 mm
All TE-C tools
M6x25
HKD-TE-CX M10x25
12 mm
162 mm
27 mm
All TE-C tools
M10x25
27 mm
All TE-C tools
M8x25
Sales pack
quantity
Item number
1 pc
414472
1 pc
414480
1 pc
414475
Ordering
designation
5 µm)
ETA
Material, corrosion
Carbon steel
Accessories
HRG 8/10/14/16
Installation tools
SIW 22T-A 1/2”
No
DiBt Z-21.1-2021 for HUS3
adjustability
ETA 13/1038 for HUS3-H/C
screw anchor (ETAG 13/1038,
Option 1)
details.
Yes
Yes
Wrench
size
Anchor
length
Embedment Embedment Package contents
depth 1
depth 2
HUS3-H 8x55
5/-/-
8
12 mm
8
12 mm
13 mm
13 mm
65 mm
50 mm
HUS3-H 8x75
25/15/5
8
12 mm
13 mm
13 mm
75 mm
8
12 mm
13 mm
13 mm
8
12 mm
13 mm
8
12 mm
8
HUS3-H 10x60
5/-/-
HUS3-H 10x80
25/5/-
Sales pack
quantity
Item
number
50 pc
2079794
60 mm
1x Screw anchor HUS3-H 8x65 15/5/- 50 pc
2079795
50 mm
60 mm
50 pc
2079796
85 mm
50 mm
60 mm
1x Screw anchor HUS3-H 8x75
25/15/5
50 pc
2079797
13 mm
100 mm
50 mm
60 mm
50 pc
2079798
13 mm
13 mm
120 mm
50 mm
60 mm
50 pc
2079799
12 mm
13 mm
13 mm
150 mm
50 mm
60 mm
50 pc
2079910
10
14 mm
15 mm
15 mm
60 mm
55 mm
100/90/80
1x Screw anchor HUS3-H 10x60 5/-/- 50 pc
2079911
HUS3-H 10x70
15/-/-
10
14 mm
15 mm
15 mm
70 mm
55 mm
50 pc
2079912
10
14 mm
15 mm
15 mm
80 mm
55 mm
75 mm
15/-/-
50 pc
2079913
HUS3-H 10x90
35/15/5
10
14 mm
15 mm
15 mm
90 mm
55 mm
75 mm
50 pc
2079914
HUS3-H 10x100 10
45/25/15
14 mm
15 mm
15 mm
100 mm
55 mm
75 mm
50 pc
2079915
14 mm
15 mm
15 mm
110 mm
55 mm
75 mm
50 pc
2079916
14 mm
15 mm
15 mm
130 mm
55 mm
75 mm
50 pc
2079917
14 mm
15 mm
15 mm
150 mm
55 mm
75 mm
50 pc
2079918
14
18 mm
21 mm
21 mm
75 mm
65 mm
95/75/65
16 pc
2079921
HUS3-H 14x100 14
35/15/-
18 mm
21 mm
21 mm
100 mm
65 mm
85 mm
16 pc
2079922
18 mm
21 mm
21 mm
130 mm
65 mm
85 mm
35/15/-
16 pc
2079923
18 mm
21 mm
21 mm
150 mm
65 mm
85 mm
16 pc
2079924
HUS3-H 8x65
15/5/-
HUS3-H 8x85
35/25/15
HUS3-H 10x150 10
95/75/65
HUS3-H 14x75
10/-/-
HUS3-H 14x130 14
65/45/15
HUS3-H 14x150 14
85/65/35
Material
composition
Tested/approved
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
Wrench/
nut size
HUS3-H 10x130 10
75/55/45
DIBt
Anchor Base plate
size
clearance hole
HUS3-H 10x110 10
55/35/25
232
Hex head
Screw anchor HUS3-H 8/10/14
HUS3-H 8x150
100/90/80
Diameter
162 mm
■
■
■
Base plate fastening in steel and metal
applications
Formwork and bracing
Temporary applications
Higher productivity - less drilling and
fewer operations than with conventional
anchors
abZ (DiBt) approval for reusability in
fresh concrete (10/15/20 Nmm2) for
temporary applications
HUS3-H 8x120
70/60/50
10 mm
■
HUS3-H 8x100
50/40/30
Setting tool HKD-TE-CX
HKD-TE-CX M8x25
Approvals
Head configuration
13 mm
13 mm
55 mm
50 mm
1x Screw anchor HUS3-H 8x55 5/-/-
35/25/15
50/40/30
70/60/50
25/5/-
35/15/5
45/25/15
55/35/25
75/55/45
10/-/-
65/45/15
85/65/35
233
9
Anchor Systems
Anchor Systems
Screw anchor HUS3-HF 10/14
Screw anchor HUS-V
Anchor size Base plate clearance hole
Wrench/
nut size
Socket
size
Wrench
size
Anchor
length
Embedment Package contents
depth 1
HUS3-HF 10x60 5/-/
10
14 mm
15 mm
15 mm
15 mm 60 mm
55 mm
HUS3-HF 10x80 25/5/
10
14 mm
15 mm
15 mm
15 mm 80 mm
55 mm
HUS3-HF 10x100 45/25/15 10
14 mm
15 mm
15 mm
15 mm 100 mm 55 mm
HUS3-HF 10x110 55/35/25 10
14 mm
15 mm
15 mm
15 mm 110 mm 55 mm
HUS3-HF 14x75 10/-/-
18 mm
21 mm
21 mm
21 mm 75 mm
HUS3-HF 14x100 35/15/-
14
14
18 mm
21 mm
21 mm
65 mm
21 mm 100 mm 65 mm
Sales pack
quantity
1x Screw anchor HUS3HF 10x60 5/-/-
1x Screw anchor HUS3HF 10x80 25/5/-
1x Screw anchor HUS3HF 10x100 45/25/15
1x Screw anchor HUS3HF 10x110 55/35/25
1x Screw anchor HUS3HF 14x75 10/-/1x Screw anchor HUS3HF 14x100 35/15/-
Item
number
■
■
■
Temporary applications on all grades of
concrete
Indicates whether the screw anchor can
still be reused
Always available on site in combination
with the SIW 22T-A
Anchor size
Check gauge HRG 8
HUS 8
Check gauge HRG 10
Check gauge HRG 14
HUS 14
50 pc
2079927
50 pc
2079928
16 pc
2079929
Accessories
HRG 8/10/14/16
2079930
Installation tools
SIW 22T-A 1/2”
16 pc
■
■
■
■
HUS-V 8x75 25/10
5 µm)
HUS-V 8x85 35/20
HUS-V 8x95 45/30
HUS-V 10x60 5/-
HUS-V 10x85 30/10
SIW 22T-A 1/2”
HUS-V 10x95 40/20
Anchor
size
8
8
8
8
10
10
10
HUS-V 10x105 50/30 10
Sales pack
quantity
Base plate
clearance hole
12 mm
12 mm
12 mm
12 mm
14 mm
14 mm
14 mm
14 mm
Wrench/
nut size
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
15 mm
15 mm
Socket
size
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
15 mm
15 mm
Wrench
size
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
15 mm
15 mm
Anchor
length
55 mm
75 mm
85 mm
95 mm
60 mm
85 mm
95 mm
Embedment
depth 1
Package contents
50 mm
1x Screw anchor HUS-V 8x55
50 mm
50 mm
50 mm
55 mm
55 mm
55 mm
105 mm 55 mm
No
No
No
Sales
pack
quantity
50 pc
50 pc
50 pc
50 pc
50 pc
50 pc
50 pc
50 pc
Item
number
2079937
2079938
2079939
2079940
2079941
2079942
2079943
2079944
Item number
2092003
1 pc
2090674
1 pc
1x Check gauge HRG 14
5 µm)
2079926
Material
composition
Installation tools
Hex head
50 pc
n/a
HUS 10
Head configuration
Material
composition
Tested/approved
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
Head configuration
Package contents
Technical data
2079925
HUS-V 8x55 5/-
Technical data
applications
Railings and handrails
Formwork and bracing
Higher productivity - less drilling and
fewer operations than with conventional
anchors
Technical data for cracked and uncracked concrete
50 pc
Anchor reusability gauge HRG 8/10/14/16
■
2090675
1 pc
Screw anchor HUS3-C 8/10
■
■
■
■
Ordering
designation
HUS3-C 8x65
15/-/-
HUS3-C 8x75
25/15/-
HUS3-C 8x85
35/25/15
HUS3-C 10x70
15/-/-
HUS3-C 10x90
35/15/-
HUS3-C
10x100
45/25/15
234
Technical data
Railings and balustrades
Architectural metal
ETA approval for cracked and uncracked concrete
Seismic approval ETA C1
Anchor size Base plate
clearance
hole
Bit
size
Anchor
length
Embedment
depth 1
Embedment
depth 2
8
12 mm
T45
65 mm
50 mm
8
12 mm
T45
75 mm
50 mm
60 mm
8
12 mm
T45
85 mm
50 mm
60 mm
10
14 mm
T50
70 mm
55 mm
10
14 mm
T50
90 mm
55 mm
75 mm
10
14 mm
T50
100 mm
55 mm
75 mm
Head configuration
Countersunk Torx
Material
composition
Tested/approved
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
5 µm)
Material, corrosion
Carbon steel
Installation tools
SIW 22T-A 1/2”
No
Yes
Yes
depth 3
Sales
pack
quantity
Item
number
1x Screw anchor HUS3-C 8x65 15/-/-
50 pc
2079931
70 mm
1x Screw anchor HUS3-C 8x75 25/15/-
50 pc
2079932
70 mm
1x Screw anchor HUS3-C 8x85
35/25/15
50 pc
2079933
50 pc
2079934
50 pc
2079935
50 pc
2079936
85 mm
9
235
Anchor Systems
Anchor Systems
Technical data
■
■
■
■
■
Piping or ventilation applications where
channels are fastened directly to the
ceiling
Fastening handrails, railings and other
ornamental steelwork
Suitable for serial applications
ETA approval - also for use in cracked
concrete
Approvals
Head configuration
Torx hex head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
5 µm)
Material, corrosion
Steel, zinc-plated
Installation tools
SID 14-A, SIW 14-A,
SID 22-A, SIW 22-A
Reduced edge and spacing distances
Through-fastening
All
ETA, Fire
resistance
ETA, Fire resistance, Seismic
ETA 10/0005 for HUS screw anchor size 6 multiple applications
(ETAG 001-06, Option -)
Screw anchor HUS-A
■
ETA 08/0307 for HUS screw anchor single point (ETAG 001-03,
Option 1)
Technical data
The highly efficient solution for pipe
fastenings
details.
Yes
Yes
Anchor
size
HUS-A 6x55 M8/18
6 / M8
HUS-A 6x35 M10/21 6 / M10
Base
Wrench
plate
size
clearance hole
9 mm
9 mm
13 mm
13 mm
Anchor
length
Thread
length
55 mm
35 mm
18 mm
21 mm
Embedment
depth 1
Embedment
depth 2
35 mm
55 mm
35 mm
■
HUS-H 6x80/25/45
6
HUS-H 6x100/45/65 6
9 mm
9 mm
Wrench
size
13 mm
13 mm
Bit
size
T30
T30
Anchor
length
80 mm
100 mm
Embedment
depth 1
35 mm
35 mm
depth 2
55 mm
55 mm
Sales pack
quantity
1x Screw anchor HUS-H 6x80
100 pc
100 pc
Item
number
■
■
■
416737
416738
■
Screw anchor HUS-H 8/10/14
■
■
■
■
■
Formwork
Removable fastenings
ETA approval - also for use in cracked
concrete
Seismic approval ETA C1
Technical data
Head configuration
Hex head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Tested/approved
PROFIS
5 µm)
Material, corrosion
Steel, zinc-plated
Installation tools
SIW 22T-A 1/2”, SIW
14-A, SIW 22-A
Anchor
length
Embedment
depth 1
Embedment
depth 2
Embedment
depth 3
Package contents
HUS-H
8x90/15/30/40
8
12 mm
13 mm
90 mm
50 mm
60 mm
75 mm
13 mm
55 mm
50 mm
HUS-H
10x75/5/15
10
14 mm
15 mm
75 mm
60 mm
70 mm
HUS-H
10x100/15/30/40
10
14 mm
15 mm
100 mm
60 mm
70 mm
HUS-H
14x80/-/-/10
14
18 mm
21 mm
80 mm
70 mm
HUS-H
14x115/5/25/45
14
18 mm
21 mm
115 mm
70 mm
90 mm
110 mm
HUS-H
14x135/25/45/65
14
18 mm
21 mm
135 mm
70 mm
90 mm
110 mm
HUS-H
14x160/50/70/90
14
18 mm
21 mm
160 mm
70 mm
90 mm
110 mm
85 mm
Yes
Wrench
size
236
5 µm)
Material, corrosion
Steel, zinc-plated
Installation tools
SIW 14-A, SID 22-A,
SIW 22-A
Various piping and ventilation
applications
Rod hangers for single or multiple pipes
M8 and M10 internally threaded heads
for direct attachment of threaded rods
M8 and M10 dual boss allows smaller
inventories One product for 2 diameters
Anchor
size
HUS-I 6x35 M8/M10 6
Sales pack
quantity
All
Yes
Yes
Sales
pack
quantity
100 pc
100 pc
Item
number
416743
416742
Head configuration
Inner thread
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
5 µm)
Material, corrosion
Steel, zinc-plated
Installation tools
SIW 14-A, SID 22-A,
SIW 22-A
368728
1x Screw anchor HUS-H
10x75
50 pc
368736
10x100
50 pc
368738
14x80
16 pc
368745
14x115
16 pc
368746
14X135
16 pc
368747
14x160
16 pc
368748
50 pc
Internal
thread size
8 mm
Thread engagement Wrench
depth - min.
size
10 mm
13 mm
Anchor
length
35 mm
Embedment
depth 1
35 mm
Drilling depth
at embed. 1
45 mm
Pre-fastening
All
Yes
Yes
9
8 mm
Package contents
1x Screw anchor HUS-I
6x35 M8/M10
Sales pack
quantity
100 pc
Item
number
416740
Item
number
50 pc
Technical data
Internal thread size
No
Base plate
clearance hole
12 mm
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
Pre-fastening
1x Screw anchor HUS-A 6x65 M8/18
All
Anchor
size
8
1x Screw anchor HUS-A 6x35 M10/21
Through-fastening
Ordering
designation
HUS-H 8x55/-/5
Environmental
conditions
Type of fastening
Package contents
Anchor size Base plate
clearance hole
Externally threaded
Screw anchor HUS-I
Screw anchor HUS-H 6
Head configuration
368731
237
Anchor Systems
Anchor Systems
Screw anchor HUS-P
Sleeve anchor (hex head) HLC
■
■
■
■
■
Ordering designation Anchor size Base plate
clearance hole
HUS-P 6x40/5
6
9 mm
Piping or ventilation applications with
channels fastened directly to the ceiling
Various applications with ornamental
fittings in steel such as handrails or
railings
ETA approval - also for cracked
concrete
Neat head appearance No extra time
spent finishing
Bit size Anchor length Embedment
depth 1
T30
40 mm
35 mm
Fastening thickness at embed.1
5 mm
Technical data
■
Head configuration
Round head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Suitable for
cracked concrete
with redundant
fastenings
PROFIS
5 µm)
Material, corrosion
Steel, zinc-plated
Installation tools
SIW 14-A, SID 22-A,
SIW 22-A
Drilling depth at
embed. 1
45 mm
Suitable for a large range of temporary
applications, fastening small items etc.
Variety of lengths and sizes for a multitude of applications
Pre-assembled anchor for fast, easy
installation
■
Through-fastening
■
All
Yes
Ordering
designation
Yes
Package contents
Sales pack
quantity
1x Screw anchor 100 pc
HUS-P 6x40
HLC 6,5x25/5
Item
number
416745
HLC 6,5x40/20
HLC 6,5x60/40
HLC 8x40/10
HLC 8x55/25
HLC 8x70/40
HLC 8x85/55
HLC 10x40/5
HLC 10x50/15
HLC 10x60/25
HLC 10x80/45
HLC 10x100/65
HLC 12x55/15
HLC 12x75/35
HLC 12x100/60
HLC 16x60/10
HLC 16x100/50
HLC 16x140/90
HLC 20x80/25
HLC 20x115/60
HLC 20x150/95
Anchor
size
Anchor
length
6.5 mm 25 mm
6.5 mm 40 mm
6.5 mm 60 mm
8 mm
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm
10 mm
12 mm
12 mm
12 mm
16 mm
16 mm
16 mm
20 mm
20 mm
20 mm
40 mm
55 mm
70 mm
85 mm
40 mm
50 mm
60 mm
80 mm
Base plate
clearance
hole
7 mm
7 mm
7 mm
10 mm
10 mm
10 mm
10 mm
12 mm
12 mm
12 mm
12 mm
100 mm 12 mm
55 mm
14 mm
75 mm
14 mm
60 mm
18 mm
100 mm 14 mm
100 mm 18 mm
140 mm 18 mm
80 mm
21 mm
115 mm 21 mm
150 mm 21 mm
Required
tightening
torque
5 Nm
5 Nm
5 Nm
8 Nm
8 Nm
8 Nm
8 Nm
25 Nm
25 Nm
25 Nm
25 Nm
25 Nm
40 Nm
40 Nm
40 Nm
50 Nm
50 Nm
50 Nm
80 Nm
80 Nm
80 Nm
Wrench/
nut size
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm
13 mm
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
15 mm
19 mm
19 mm
19 mm
24 mm
24 mm
24 mm
Wrench
size
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm
13 mm
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
15 mm
19 mm
19 mm
19 mm
24 mm
24 mm
24 mm
Max. fixture thickness at standard
embedment depth
5 mm
20 mm
Technical data
Head configuration
Hex head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Material, corrosion
5 µm)
Pre-fastening,
Through-fastening
All
Steel, zinc-plated
Package contents
Sales
pack
quantity
1x Anchor HLC 6,5x25/5 assy
100 pc
40 mm
100 pc
10 mm
100 pc
1x Anchor HLC 8x40/10 assy
25 mm
100 pc
40 mm
100 pc
55 mm
100 pc
5 mm
100 pc
15 mm
50 pc
25 mm
50 pc
45 mm
50 pc
65 mm
50 pc
15 mm
50 pc
35 mm
50 pc
60 mm
50 pc
10 mm
25 pc
50 mm
25 pc
90 mm
10 pc
25 mm
10 pc
1x Anchor HLC 20x 80 assy
60 mm
10 pc
1x Anchor HLC 20x115 assy
95 mm
10 pc
1x Anchor HLC 20x150 assy
10 pc
Item
number
385811
385812
385813
385814
385816
385817
385818
385819
385820
385822
385823
385824
385825
385827
385829
385830
385831
385832
385833
385834
385835
Sleeve anchor (hex head) HLC-H
■
■
■
Suitable for a large range of temporary
applications, fastening small items etc.
installation
Technical data
Head configuration
Hex head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Material, corrosion
Installation tools
Ordering designation Anchor diameter
(imperial)
HLC-H 12x55/15
HLC-H 12x75/35
HLC-H 12x100/60
HLC-H 10x40/5
HLC-H 10x60/25
HLC-H 10x80/45
HLC-H 10x100/65
HLC-H 16x60/10
HLC-H 16x100/50
HLC-H 16x140/90
HLC-H 8x40/10
HLC-H 8x55/25
HLC-H 8x70/40
238
1/2 in
1/2 in
1/2 in
3/8 in
3/8 in
3/8 in
3/8 in
5/8 in
5/8 in
5/8 in
5/16 in
5/16 in
5/16 in
Anchor
size
12 mm
12 mm
12 mm
10 mm
10 mm
10 mm
10 mm
16 mm
16 mm
16 mm
8 mm
8 mm
8 mm
Anchor
length
55 mm
Base plate
clearance
hole
14 mm
75 mm
14 mm
40 mm
12 mm
100 mm 14 mm
60 mm
12 mm
80 mm
12 mm
60 mm
18 mm
100 mm 12 mm
100 mm 18 mm
140 mm 18 mm
40 mm
55 mm
70 mm
10 mm
10 mm
10 mm
Required
tightening
torque
40 Nm
40 Nm
40 Nm
25 Nm
25 Nm
25 Nm
25 Nm
50 Nm
50 Nm
50 Nm
8 Nm
8 Nm
8 Nm
Wrench/
nut size
17 mm
17 mm
17 mm
13 mm
13 mm
13 mm
13 mm
19 mm
19 mm
19 mm
10 mm
10 mm
10 mm
Wrench
size
17 mm
17 mm
17 mm
13 mm
13 mm
13 mm
13 mm
19 mm
19 mm
19 mm
10 mm
10 mm
10 mm
Pre-fastening,
Through-fastening
All
Steel, zinc-plated
TE 6-A36-AVR
Package contents
1x Anchor HLC-H 12x55/15 assy
Sales
pack
quantity
50 pc
50 pc
25 pc
50 pc
50 pc
50 pc
50 pc
10 pc
15 pc
10 pc
100 pc
100 pc
100 pc
Item
number
385848
385849
385852
385841
385842
385845
385847
385853
385854
385855
385836
385838
385840
239
9
Anchor Systems
Anchor Systems
Sleeve anchor (closed eyebolt) HLC-EC
Technical data
■
installation
Eyelet version
■
Ordering
designation
Anchor
size
HLC-EC 10x50
10 mm 50 mm
HLC-EC 8x40
HLC-EC 16x100
8 mm
Anchor
length
40 mm
Base plate
clearance hole
10 mm
12 mm
16 mm 100 mm 18 mm
Technical data
Required tightening torque
Drilling
standard embedment depth depth
25 Nm
20 mm
8 Nm
50 Nm
14 mm
40 mm
50 mm
59 mm
75 mm
Head configuration
Closed eye bolt
Environmental
conditions
Material
composition
Installation
direction
Material, corrosion
5 µm)
All
■
Steel, zinc-plated
Package contents
Sales pack
quantity
1x Anchor HLC-EC 8x40 assy
50 pc
1x Anchor HLC-EC 16x100
assy
10 pc
Item
number
385871
385872
1x Anchor HLC-EC 10x50 assy 50 pc
385873
■
■
■
Securing support frames, timber frames
for light stand-off cladding, facade
panels
Fastening window and door frames
Pre-assembled screw
Ergonomic setting tool for thread sizes
M4 to M8
Head configuration
Round head
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
Additional product
information
Material, corrosion
Steel, zinc-plated
Accessories
Pre-fastening,
Through-fastening
All
With pre-assembled
screw
Steel, zinc-plated
HHD, HHD Pro
Cavity anchor HHD-S
Sleeve anchor (counter sunk) HLC-SK
■
Suitable for various base materials
thanks to the expansion principle
installation
■
■
Anchor
size
Anchor
length
Base plate
clearance hole
Required tightening
torque
HLC-SK 8x60/25
8 mm
60 mm
10 mm
8 Nm
HLC-SK 8x90/55
8 mm
90 mm
10 mm
HLC-SK 10x85/45
10 mm
85 mm
HLC-SK 10x105/65 10 mm
Technical data
Head configuration
Countersunk
Environmental
conditions
Type of fastening
Through-fastening
HHD-S M5/12X52
Material
composition
Installation
direction
Material, corrosion
HHD-S M6/12X52
All
Drilling
depth
Package contents
T30
25 mm
40 mm
8 Nm
T30
55 mm
40 mm
1x Anchor HLC-SK
8x60/25 assy
12 mm
25 Nm
T40
45 mm
50 mm
105 mm
12 mm
25 Nm
T40
65 mm
50 mm
HLC-SK 10x130/95 10 mm
130 mm
12 mm
25 Nm
T40
95 mm
50 mm
HLC-SK 12x80/35
80 mm
14 mm
40 Nm
T40
35 mm
65 mm
12 mm
1x Anchor HLC-SK
8x90/55 assy
1x Anchor HLC-SK
10x85/45 assy
1x Anchor HLC-SK
10x105/65 assy
1x Anchor HLC-SK
10x130/90 assy
1x Anchor HLC-SK
12x80/35 assy
Anchor size
Anchor length
Bit size
Max. fixture thickness at standard embedment depth
HHD-S M4/19X45
M4
45 mm
PH1
25 mm
50 pc
332063
HHD-S M5/25X65
M5
65 mm
PH2
30 mm
50 pc
332067
M5
Sales
pack
quantity
52 mm
M6
HHD-S M6/24X65
PH2
52 mm
M6
HHD-S M6/40X80
Steel, zinc-plated
Bit size Max. fixture thickness
at standard embedment
depth
PH3
65 mm
M6
PH3
80 mm
PH3
30 mm
Sales pack
quantity
Item number
332066
50 pc
30 mm
332070
50 pc
30 mm
332071
50 pc
30 mm
332072
50 pc
Setting tool HHD
Item
number
100 pc
385859
100 pc
385861
50 pc
385863
50 pc
385864
Setting tool HHD-S
25 pc
385865
50 pc
385866
Sales pack
quantity
Item number
332076
1 pc
Hook and ring anchors HA 8
9
Metal frame anchor HT
HA 8 H1
8 mm
HA 8 R1
Ordering designation Anchor size Anchor length Bit size Standard embedment depth Max. fixture thickness at standard embedment depth
HT 10X72
10 mm
HT 10X112
10 mm
HT 10X132
10 mm
72 mm
112 mm
132 mm
PZ3
PZ3
PZ3
30 mm
42 mm
30 mm
82 mm
30 mm
Drilling depth Sales pack
quantity
50 mm
50 mm
102 mm
50 mm
Item number
Anchor size
8 mm
Anchor length
66 mm
66 mm
40 mm
DBZ 6/4.5
DBZ 6/35
240
Anchor
size
6 mm
6 mm
Anchor
length
40 mm
71 mm
Base plate
clearance hole
■
369266
■
■
7 mm
7 mm
Standard
embedment
depth
32 mm
32 mm
Max. fixture
thickness
at standard
embedment
depth
5 mm
35 mm
Thickness fastened - min.
0 mm
5 mm
Drilling
depth
Package contents
40 mm 1x Wedge anchor DBZ sht.assy
55 mm 1x Wedge anchor DBZ long assy
Sales
pack
quantity
Item
number
100 pc
256312
100 pc
Ordering
designation
HAM M6X50
HAM M8X60
256311
1x Hook anchor HA8H1 assy
1x Ring anchor HA8 R1 assy
Wedge anchor DBZ
Ordering
designation
50 mm
Package contents
Sales pack
quantity
Item number
57036
100 pc
57059
100 pc
Sleeve anchor with screw and washer HAM with bolt
369265
100 pc
50 mm
40 mm
369263
100 pc
100 pc
Drilling depth
Anchor
size
M6
M8
HAM M10X80 M10
HAM M12X90 M12
Anchor
length
60 mm
75 mm
85 mm
95 mm
Internal
thread size
6 mm
8 mm
10 mm
12 mm
Internally-threaded solution for all solid
base materials
Works on all solid base materials
Protective plastic ring prevents deformation caused by hammering
Base plate
clearance hole
7 mm
9 mm
12 mm
14 mm
Thread length
5 mm
10 mm
15 mm
20 mm
Useable thread length
5 mm
10 mm
15 mm
20 mm
Technical data
Head configuration
Hex head
Environmental
conditions
Type of fastening
Installation
direction
Material, corrosion
All
60 mm
75 mm
85 mm
95 mm
Pre-fastening
Steel, zinc-plated
Sales pack quantity
100 pc
50 pc
25 pc
25 pc
Item number
305857
305858
305859
305860
241
Anchor Systems
Anchor Systems
Frame anchor with countersunk head HRD-C
■
■
■
■
■
Typical applications for metal fabricators such as fastening handrails, window bars, railings, balustrades, etc.
Fastening wooden substructures for
ventilated facades
Fastening door and window frames
Flexible embedment depth (approved at
50 mm and 70 mm embedment depth) the ideal anchor for a huge range of applications in virtually all base materials
Suitable for fastening thicknesses up to
260 mm (anchor lengths from 60 mm to
310 mm)
Technical data
Technical data
Anchor type
Plastic anchor
Anchor type
Anchor with screw
Head configuration
Countersunk Phillips
Head configuration
Countersunk
Environmental
conditions
Type of fastening
Environmental
conditions
Type of fastening
Material
composition
Suitable for
cracked concrete
with redundant
fastenings
Material, corrosion
5 µm), Polyamide
Material
composition
Body: polyamide,
Screw: steel, zincplated (min. 5 µm)
Installation temperature - min.
-10 °C
Through-fastening
Yes
■
■
Steel, zinc-plated
■
■
Fastening trim strips, battens and
components for electrical and plumbing
installations
Fastening components for electrical
and plumbing installations
For universal use on many materials,
including perforated brick and block
The hammer-driven screw can also
be driven or unscrewed using a
screwdriver
Installation
direction
Material, corrosion
Through-fastening
All
Steel, zinc-plated
In-service tempera- -40 - 80 °C
ture – range
Impact anchor HPS-1
Ordering
designation
Anchor
size
10 mm
60 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x80
10 mm
80 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x100
10 mm
100 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x60
Anchor
length
Base plate
clearance hole
Screw head diameter Bit size Colour Embedment depth 1 Package contents
HRD-C 10x120
10 mm
120 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x140
10 mm
140 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x160
10 mm
160 mm
11 mm
14 mm
T40
Red
50 mm
HRD-C 10x180
10 mm
180 mm
11 mm
14 mm
T40
Red
50 mm
Sales pack
quantity
Item
number
1x Frame anchor HRD-C
10x60 assy
50 pc
423859
50 pc
423860
10x100 assy
50 pc
423861
10x80 assy
10x120 assy
10x140 assy
10x160 assy
10x180 assy
Ordering designation Anchor size Bit size Packaging Standard
embedment
depth
Max. fixture thickness
at standard embedment depth
Drilling
depth
Package contents
HPS-1 5/5x25
2 mm
5 mm
25 mm
1x Impact anchor HPS-1 4/0 assy
15 mm
35 mm
30 mm
HPS-1 4/0x20
M4
PZ2
Box
20 mm
HPS-1 5/15x35
M5
PZ2
Box
20 mm
50 pc
423862
50 pc
423863
HPS-1 6/25x50
50 pc
423864
HPS-1 6/10x35
50 pc
423865
HPS-1 6/30x55
HPS-1 6/40x65
HPS-1 6/5x30
HPS-1 6/15x40
HPS-1 8/20x50
HPS-1 8/40x70
HPS-1 8/60x90
HPS-1 8/80x110
HPS-1 8/0x25
HPS-1 8/10x40
HPS-1 8/100x130
M5
PZ2
M6
Box
PZ2
M6
Box
PZ2
M6
Box
PZ2
M6
Box
PZ2
M6
Box
PZ2
M6
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
M8
Box
PZ2
Box
20 mm
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
25 mm
40 mm
10 mm
5 mm
15 mm
20 mm
40 mm
60 mm
80 mm
2 mm
10 mm
100 mm
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
Sales
pack
quantity
1x Impact anchor HPS-1 5/ 5 assy
250 pc
260369
200 pc
260348
200 pc
100 pc
100 pc
100 pc
150 pc
150 pc
150 pc
50 pc
50 pc
50 pc
50 pc
100 pc
100 pc
Item
number
100 pc
260347
230517
260351
260352
230516
260349
260350
230518
230519
260355
260356
238160
260353
260367
Impact anchor HPS-1 R
■
■
■
■
■
Anchoring light frames, battens and
profiles in hollow and solid base
materials
Corrosion-resistant for outdoor use
Fastening components for electrical
and plumbing installations
Stainless steel hammer-driven screw for
outdoor use
Quick impact installation using a
hammer
Technical data
Anchor type
Plastic anchor
Head configuration
Countersunk Phillips
Environmental
conditions
Type of fastening
Outdoor
Material
composition
Body: polyamide,
Screw: 304 stainless
steel
Installation
direction
Material, corrosion
Through-fastening
All
Steel, stainless
ture – range
size
M5
37 mm PZ2
HPS-1 R 6/15x40
M6
42 mm PZ2
HPS-1 R 6/25x50
HPS-1 R 6/40x65
HPS-1 R 8/30x60
M6
M6
M6
M8
HPS-1 R 8/80x110 M8
Bit
size
HPS-1 R 5/15x35
HPS-1 R 6/10x35
242
Anchor
length
37 mm PZ2
52 mm PZ2
67 mm PZ2
63 mm PZ2
113
mm
PZ2
Drilling
depth
25 mm
10 mm
40 mm
20 mm
25 mm
25 mm
25 mm
30 mm
30 mm
15 mm
15 mm
25 mm
40 mm
30 mm
80 mm
Package contents
Sales pack
quantity
Item
number
30 mm
1x Impact anchor HPS-1 R 5/15 assy
200 pc
260358
40 mm
100 pc
260360
40 mm
40 mm
50 mm
50 mm
1x Impact anchor HPS-1 R 8/ 30 assy
1x Impact anchor HPS-1 R 8/ 80 assy
150 pc
100 pc
100 pc
50 pc
50 pc
230525
260361
260362
260364
260366
243
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
Plastic anchor
Head configuration
Environmental
conditions
Type of fastening
■
Anchor type
Fastening on low-strength materials
with cavities - for use with standard
wood screws
Anchoring in perforated brick or block,
drywall, concrete
The wings spring out and adapt to all
materials
Allows flexibility when selecting screws
Material
composition
Installation
direction
Material, corrosion
Technical data
Anchor type
Plastic anchor
Flat head, Round head
Head configuration
n/a
Indoor, damp conditions, Indoor, dry conditions, Outdoor
Environmental
conditions
Pre-fastening,
Through-fastening
Type of fastening
Polyamide PA 6
■
Wall
■
Plastic
ture – range
■
Material
composition
Installation
direction
LEED information
available
Material, corrosion
Many kinds of light-duty fastenings, especially electrical installations, sanitary
fixtures, etc.
For use on a wide range of materials:
concrete, solid brick, hollow brick, gas
(aerated) concrete, gypsum panel
High holding power
Pre-fastening,
Through-fastening
Polyamide PA 6
All
Yes
Plastic
ture – range
SFC 14-A, SFC 22-A
Installation tools
Light-duty anchor HLD
Universal plastic anchor HUD-1
Ordering designation Anchor diameter
(imperial)
Anchor
size
Anchor length Packaging Colour Max. fixture thickness
at standard embedment
depth
Drilling depth Package contents Sales pack
quantity
Item
number
HLD 2
3/8 in
10 mm
28 mm
Box
White 33 mm
50 mm
150 pc
335506
HLD 3
3/8 in
10 mm
35 mm
Box
White 40 mm
56 mm
100 pc
335507
Ordering
designation
HLD 4
3/8 in
10 mm
44 mm
Box
White 49 mm
66 mm
100 pc
335508
HUD-1 6x30
1x Light-duty
anchor HLD 2
1x Light-duty
anchor HLD 3
1x Light-duty
anchor HLD 4
Anchor
size
Anchor
length
Base plate
clearance hole
Packaging Colour Standard embedment
depth
Drilling
depth
6 mm
Bag
40 mm
HUD-1 5x25
5 mm
25 mm
5 mm
HUD-1 8x40
8 mm
40 mm
8 mm
HUD-1 10x50
HUD-1 12x60
HUD-1 14x70
6 mm
10 mm
12 mm
14 mm
30 mm
50 mm
60 mm
70 mm
10 mm
13 mm
15 mm
Bag
Red
25 mm
Bag
Red
40 mm
Bag
Bag
Bag
Red
Red
Red
Red
30 mm
Package contents
35 mm 1x Universal anchor HUD-1 5X25
50 mm
60 mm
70 mm
Sales pack
quantity
Item
number
200 pc
338708
200 pc
338710
200 pc
100 pc
100 pc
50 pc
338709
338711
331619
331620
Universal plastic anchor HUD-L
■
■
■
■
Refurbishing work on thick layers of
plaster and on double-clad drywall
panels, e.g. battens, junction boxes,
cables, light switches, lights, brackets,
signs, shelves, plumbing fixtures, wall
brackets etc.
Extra-long plastic anchor for refurbishment and renovation work or drywall
installation
Extra long, for bridging thick layers of
plaster up to 30 mm
Forms a “knot” when set in hollow materials and double-clad drywall panels
Technical data
Anchor type
Plastic anchor
Head configuration
n/a
Environmental
conditions
Type of fastening
Material
composition
Installation
direction
LEED information
available
Material, corrosion
Pre-fastening,
Through-fastening
Body: polyamide
All
Yes
Plastic
ture – range
SFC 14-A
Installation tools
Ordering designation Anchor diameter (imperial)
HUD-L 10x70
244
3/8 in
Anchor
size
10 mm
Anchor
length
70 mm
Base plate clearance hole Packaging Colour Standard embedment depth
10 mm
Box
Red
70 mm
Package
contents
1x Anchor
HUD-L 10X70
Sales pack
quantity
100 pc
Item
number
315940
245
9
Anchor Systems
Anchor Systems
Technical data
■
■
■
Insulation fastenings with fire resistance
requirements
Certified fire resistance
Fire resistant fastener for insulation
materials up to 150 mm
Notes:
Anchor type
Insulation holder
Environmental
conditions
Type of fastening
Indoor, ventilated
facades
Material
composition
Installation
direction
Material, corrosion
5 µm)
ETICS
No
Through-fastening
All
Steel, zinc-plated
Metal insulation fastener IDMS
Ordering designation Anchor length Insulation material thickness fastened - min. Insulation material thickness fastened - max.
IDMS 0/ 3
IDMS 3/ 6
80 mm
110 mm
0 mm
30 mm
30 mm
60 mm
Standard embedment depth Sales pack
quantity
50 mm
Item number
65752
250 pc
50 mm
65753
250 pc
Insulation anchor IDP
■
■
■
Ordering
designation
IDP 0/2
IDP 2/4
IDP 4/6
IDP 6/8
IDP 8/10
IDP 10/12
IDP 13/15
246
Colour Min. embedment
depth
White 28 mm
White 28 mm
White 28 mm
White 28 mm
White 28 mm
White 28 mm
White 28 mm
Insulation
material thickness fastened
- min.
0 mm
20 mm
40 mm
60 mm
80 mm
100 mm
120 mm
Fastening hard, self-supporting,
insulating materials such as expanded
polystyrene
Quick and easy impact installation
Insulating material thickness: up to 150
mm
Insulation material thickness
fastened - max.
20 mm
40 mm
60 mm
80 mm
100 mm
120 mm
150 mm
Standard embedment
depth
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
Technical data
Anchor type
Insulation holder
Type of fastening
Through-fastening
Material
composition
Installation
direction
Material, corrosion
Polypropylene
Installation temperature - max.
Installation temperature - min.
ETICS
40 °C
All
Plastic
9
0 °C
No
Package contents
Sales
pack
quantity
1x Insulation mandrel IDP 0/2
250 pc
250 pc
250 pc
250 pc
250 pc
1x Insulation mandrel IDP 10/12 250 pc
1x Insulation mandrel IDP 13/15 250 pc
Item
number
332105
332106
332107
332108
332109
332110
332111
247

Anchor Systems

Transcription

Similar documents

Hilti HIT-HY 150 MAX with HIT-TZ

Anchor Systems

Anchor design

High performance steel anchors

Chemical anchoring systems.

TrailMaster Go-Kart 110 XRX PARTS MANUAL

Cable Trays and Integrated Ceilings

Clamps - Hydac

Hilti HIT-HY 200 with HIT-Z