aquarelle floor

SPECIFIC SOLUTIONS
WETROOM CONCEPT
Floorcoverings
Optima Multisafe
Granit Multisafe
Multisafe Aqua
iQ Optima 1.5mm
Safetred Aqua
Aquarelle Floor
p. 264
p. 266
p. 268
p. 270
p. 272
p. 274
Wallcoverings
p. 282
p. 286
p. 290
WALL PROTECTIONS
Wallgard
ProtectWALL
p. 298
p. 300
STATIC CONTROL
Homogeneous vinyl
iQ Toro SC
iQ Granit SD
Primo SD
p. 310
p. 312
p. 314
Linoleum
Linoleum xf² SD Static Dissipative
p. 316
SAFETY
Homogeneous vinyl
Granit Safe.T
Primo Safe.T
p. 324
p. 326
Heterogeneous vinyl
Safetred Design
Safetred Ion
Safetred Spectrum - Spectrum Tiles
Safetred Universal
Safetred Universal Plus (R11)
Safetred Transport
p. 330
p. 334
p. 338
p. 340
p. 342
p. 344
STAIRS & ACCESSIBILITY
Tapiflex Stairs
Warning Tile & Tactile strip
p. 352
p. 354
257
SPECIFIC
SOLUTIONS
Aquarelle Wall HFS
Aquarelle Wall
Aquarelle Wall Borders
WETROOM CONCEPT
258
WETROOM
CONCEPT
Floorcoverings
Optima Multisafe
p. 264
Granit Multisafe
p. 266
Multisafe Aqua
p. 268
iQ Optima 1.5mm
p. 270
Safetred Aqua
p. 272
Aquarelle Floor
p. 274
Wallcoverings
p. 282
Aquarelle Wall
p. 286
Aquarelle Wall Borders
p. 290
259
SPECIFIC
SOLUTIONS
Aquarelle Wall HFS
OUR SELECTION OF ACCESSORIES
1
Aquarelle Wall HFS
Secures the wall and protects it
from water infiltration.
Junction profile
PJ30
Provides a perfect finish
and protects the edge of the wall covering.
Cove former
PA20
Improves hygiene inside wall corner and
makes maintenance easier.
See p. 510 for detailed info
260
FOR WETROOM
SPECIFIC
SOLUTIONS
2
3
Skirting
PTS
Rubber transition profile.
To be welded to floorings
on both sides.
See p. 510 for detailed info
Rectangular drain
Flooring to be inserted into the drain
for perfect water tightness.
See p. 511 for detailed info
261
WETROOM FLOORCOVERINGS
Floorcovering offer included into the complete wetroom
concept, for wet environment in areas from healthcare
to student halls and sports centres, to collective housing
and hospitality environments
SENSORIAL BENEFITS
FUNCTIONAL BENEFITS
ENVIRONMENTAL BENEFITS
•Unique all-in-one concept:
•Hygienic and clean
•Hard wearing and watertight
•Healthier interior with optimal
coordinated floors, walls and
accessories offer
73 attractive and practical colours
and designs
Mix & match with other Tarkett
ranges (Tapiflex & Acczent
Evolution, Tapiflex & Acczent
Excellence, ProtectWALL)
•
•
installation
Easy access and added value
on safety (Class B or C floorings)
for healthcare or aged care
applications
Easy to clean
•
indoor air quality
100% recyclable solution
•
•
1 TopClean XP Pur reinforced surface:
1
Excellent resistance to scuffing,
soiling and staining and easy maintenance
3
2
2 Transparent wear layer
3 Printed film
4
4 Intermediate layer
5 Backing layer
Homogeneous vinyl flooring
with studded surface for excellent
slip resistance in wet areas.
5
AQUARELLE FLOOR
GRANIT MULTISAFE
OPTIMA MULTISAFE
1 Safety Clean XP Pur reinforced surface:
Excellent resistance to scuffing, soiling and staining
and easy maintenance
2 Pigmented wear layer/class t. optimum resistance to wear.
Aluminium oxide: Sustainable slip resistance throughout
product life + enhanced abrasion and scratch resistance
1
3 Compact calendared sheet:
Very high static point properties.
Increased resistance to tear / Flexible and easy to install
Homogeneous vinyl flooring with
iQ PUR surface for excellent slip
resistance in wet areas.
4 Glass fibre non woven reinforcement:
Unique dimensional stability and anti curl effect.
5 Impregnation coating
2
4
iQ OPTIMA
262
3
5
SAFETRED AQUA
STANDARDS
Optima
Multisafe
Type of floor covering
EN 649
Homogeneous compact vinyl
ISO 10874 (EN 685)
domestic
commercial
industrial
Class:
Class:
Classification
31
31
Total thickness
ISO 24346 (EN 428)
2.30mm
Wear layer thickness
ISO 24340 (EN 429)
2.00mm
Total weight
ISO 23997 (EN 430)
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
TECHNICAL DATA
Granit
Multisafe
Multisafe
Aqua
iQ Optima
1.5 mm
Safetred Aqua Aquarelle Floor
Aquarelle Floor
Design
Heterogeneous
vinyl flooring
with embossed
surface
Homogeneous
compact vinyl
Heterogeneous compact vinyl
—
Classification
Classes:
33
42
Classes:
2.50mm
2.00mm
1.50mm
2.00mm
1.50mm
2.0mm
2.00mm
0.55 mm
1.50mm
—
0.35mm
0.40mm
2 820g/m2
3 010g/m2
3 100g/m2
2 100g/m2
3 275g/m2
2 400g/m2
2 150g/m2
—
—
—
—
—
—
—
—
≤ 2.00mm3
≤ 2.00mm3
≤ 10% particle loss
—
—
32
41
Classes:
23
32
Class:
Class:
31
31
Characteristics
≤ 2.00mm3
—
—
—
—
0.02mm
Technical performances
Average measured value
—
≤ 0.10mm
≤ 0.10mm
Dimensional stability
ISO 23999 (EN 434)
≤ 0.40%
≤ 0.10%
Curl resultant to heat
EN 434
Reaction to fire
EN 13501-1
EN ISO 9239-1
SPECIFIC
SOLUTIONS
0.02mm
ISO 24343-1 (EN 433)
requirement
Residual indentation
≤ 0.10mm
—
Bfl s1
Bfl s1
≥ 8 kW/m2
Pass
≥ 8 kW/m2
Pass
Marine equipment
≤ 0.40%
≤ 0.4%
—
—
≤ 8mm
—
≤ 2mm
≤ 8mm
≤ 8mm
Bfl s1 glued over
any A2fl or A1fl
substrate
(on cement)
Cfl s1 glued over
any derivative
wood substrate
Bfl s1
Bfl s1 on
concrete
Bfl s1 glued over
any A2fl or A1fl
substrate
Cfl s1 glued over
any A2fl or A1fl
substrate
*
≥ 0.3
*
≥ 0.3
—
—
≥ 8 kW/m2
Pass
EN ISO 11925-2
IMO FTPC Part 5 and 2
IMO Res. A653
Slip resistance
0575
≥ 36
TRRL Pendulum 4S
(Wet) BS 7976 part 2
DIN 51130
EN 13893
Surface roughness Rz
EN 13845 Annex C
Bare foot test
DIN 51097
Seam strength
(N/50mm)
EN 684
≥ 36
R10
≥ 0.3
> 30 µm
Class B (18°)
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
EN 1081
EN 14041
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
Fungi and bacteria
resistance
ISO 846: Part C
Thermal resistance
Underfloor heating
EN ISO 10456
Form of delivery
ISO 24341 (EN 426)
Colours
> 20 µm
Class A:
Water rings
Class C: dessins
Stone et Fiber
wood
—
Class B
≥ 240
Average value
≥ 240 N/50mm
Individual values
≥ 180 N/50mm
—
< 2kV
—
< 2kV
< 2kV
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
≤ 2 kW
EN 1815
Static electrical charge
R10
≥ 0.3
> 30 µm
≥ 0.3µ
Class C (27°)
≥ 36
< 2kV
< 2kV
Antistatic on
concrete
7
≥6
7
7
≥6
≥6
Good resistance
High resistance
Excellent
Good resistance
—
—
—
—
—
Suitable - max
27°C
0.02m2 K/W
Suitable
0.02m2 K/W
Suitable
Rolls: 20lm x 2m
Compact: 26769
Rolls: 20lm x
2m
23lm x
3m
10
17
Does not favour growth
Approx.
0.01m2 K/W
Suitable - max
27 °C
0.013m2 K/W
Suitable - max
27 °C
0.01 m2 K/W
Suitable
0.015m2 K/W
Suitable - max
27°C
Rolls: 25lm x 2m Rolls: 25lm x 2m Rolls: 20lm x 2m Rolls: 30lm x 2m
—
12
16
12
10
Rolls: 23lm
x 3m
17
* Not required.
The above information is subject to modifications for the benefit of further improvement (07/2015).
For more detailed technical information, please contact Tarkett.
Download the product offer
263
OPTIMA MULTISAFE
Optima Multisafe - 3240863
3240 838
3240 848
3240 861
3240 853
3240 873
3240 874
3240 886
3240 860
3240 820
3240 863
3240 866
264
3240 845
TECHNICAL DATA
STANDARDS
Optima Multisafe
OPTIMA MULTISAFE
Classification
Type of floor covering
EN 649
Classification
ISO 10874 (EN 685)
commercial
Class:
31
Total thickness
ISO 24346 (EN 428)
2.30mm
Wear layer thickness
ISO 24340 (EN 429)
2.00mm
Total weight
ISO 23997 (EN 430)
2 820g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
Homogeneous compact vinyl
Characteristics
—
≤ 2.00mm3
—
Technical performances
Average measured value
Residual indentation
ISO 24343-1 (EN 433)
requirement
ISO 23999 (EN 434)
Curl resultant to heat
EN 424
Reaction to fire
EN 13501-1
≤ 0.10mm
0.40%
• Waterproof installation, ideal for wet
commercial applications
• Studded surface for excellent slip
resistance
• Warm and vivid tones to coordinate
with Aquarelle Wall HFS
• Hygienic and easy to maintain
Sustainability Tag
100%
< 10 µg/m 3
—
Optimal Indoor
Air Quality
Recyclable
EN ISO 9239-1
EN ISO 11925-2
Bfl s1
≥ 8 kW/m2
Pass
Slip resistance
DIN 51130
EN 13893
R10
≥ 0.3
Bare foot test
DIN 51097
Class B (18°)
Seam strength
(N/50mm)
EN 684
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Static electrical charge
EN 1815
< 2kV
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
Fungi and bacteria
resistance
ISO 846: Part C
Thermal resistance
Underfloor heating
EN ISO 10456
SPECIFIC
SOLUTIONS
Dimensional stability
0.02mm
Main Product Features
*TVOC AT 28 DAYS
Logistics Information
Available in rolls
Rolls length: approx. 25lm
Laying direction:
7
Good resistance
Does not favour growth
General Information
Optima Multisafe
Approx.
0.01m2 K/W
Suitable - max 27 °C
0019-0036-DoP-2013-07
http://professionals.tarkett.com
EN 14041:2004
Manufactured by: Tarkett AB
SE-372 81 Ronneby, Sweden
E
According to European
Classification ISO 10874 (EN 685)
The above information is subject to modifications for the benefit of further improvement (07/2015).
For more detailed technical information, please contact Tarkett.
Play with the Room Designer
See page 510 for coordinated accessories offer
265
GRANIT MULTISAFE
Granit Multisafe - 3476749
266
3476 379
3476 740
3476 741
3476 742
3476 743
3476 744
3476 745
3476 746
3476 747
3476 748
3476 749
3476 750
3476 382
3476 383
3476 770
TECHNICAL DATA
STANDARDS
Granit Multisafe
GRANIT MULTISAFE
Classification
Type of floor covering
EN 649
Classification
ISO 10874 (EN 685)
commercial
Class:
31
Total thickness
ISO 24346 (EN 428)
2.5mm
Wear layer thickness
ISO 24340 (EN 429)
2.00mm
Total weight
ISO 23997 (EN 430)
3 010g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
Homogeneous compact vinyl
Characteristics
—
≤ 2.00mm3
—
Main Product Features
• Waterproof installation, ideal for wet
commercial applications
• Studded surface for excellent slip
resistance
• Warm and vivid tones to coordinate
with Aquarelle Wall HFS
• Hygienic and easy to maintain
Technical performances
Average measured value
Residual indentation
ISO 24343-1 (EN 433)
requirement
ISO 23999 (EN 434)
Curl resultant to heat
EN 424
Reaction to fire
EN 13501-1
EN ISO 9239-1
EN ISO 11925-2
0.40%
—
100%
< 10 µg/m 3
Optimal Indoor
Air Quality
Recyclable
*TVOC AT 28 DAYS
Bfl s1
≥ 8 kW/m2
Pass
Slip resistance
DIN 51130
EN 13893
R10
≥ 0.3
Bare foot test
DIN 51097
Class B (18°)
Seam strength
(N/50mm)
EN 684
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Static electrical charge
EN 1815
< 2kV
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
Fungi and bacteria
resistance
ISO 846: Part C
Thermal resistance
Underfloor heating
Sustainability Tag
≤ 0.10mm
Logistics Information
Available in rolls
Rolls length: approx. 25lm
Laying direction:
7
Good resistance
Does not favour growth
General Information
Granit Multisafe
EN ISO 10456
SPECIFIC
SOLUTIONS
Dimensional stability
0.02mm
Approx.
0.01m2 K/W
Suitable - max 27 °C
0019-0034-DoP-2013-07
http://professionals.tarkett.com
EN 14041:2004
Manufactured by: Tarkett AB
SE-372 81 Ronneby, Sweden
E
According to European
Classification ISO 10874 (EN 685)
The above information is subject to modifications for the benefit of further improvement (07/2015).
For more detailed technical information, please contact Tarkett.
3476 751
Play with the Room Designer
See page 510 for coordinated accessories offer
267
MULTISAFE AQUA
Multisafe Aqua - 25910 002
25910 000
25910 001
25910 002
Dark Grey
Light Grege
Cold Grey
Cold Light Grey
Stone
25910 003
25911 000
25911 001
25911 002
25911 003
268
25912 203
Prune
GRege
Natural
Fiber wood
25912 202
25912 205
Blue
Green
Yellow
Brown
Water Rings
TECHNICAL DATA
Multisafe Aqua
STANDARDS
MULTISAFE AQUA
Classification
Heterogeneous vinyl flooring with
embossed surface
Type of floor covering
EN 649
Classification
EN 13845
domestic
commercial
Classes:
33
42
Total thickness
ISO 24346 (EN 428)
2.00mm
Wear layer thickness
ISO 24340 (EN 429)
0.55 mm
Total weight
ISO 23997 (EN 430)
3 100g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Main Product Features
• New generation of designs for use in
wetroom with highly decorative colors
Characteristics
—
Dimensional stability
ISO 23999 (EN 434)
Curl resultant to heat
EN 434
Reaction to fire
EN 13501-1
≤ 0.10mm
≤ 0.10%
Seam strength
(N/50mm)
Static electrical charge
≤ 8mm
EN 13893
DIN 51097
≥ 0.3µ
Class A: Water rings
Class C: dessins Stone et Fiber wood
EN 684
≥ 240
EN 1815
≤ 2 kW
EN 1081
EN 14041
Antistatic on concrete
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
≥6
• Bare foot comfort in wet areas
• Flexible structure for easy installation
• Colour-matched solution with Aquarelle
Wall HFS
Surface Treatment
Sustainability Tag
(1)
100%
*
Does not favour growth
0.01 m2 K/W
Suitable
EN ISO 10456
< 100 µg/m3
Better Indoor
Air Quality
Recyclable
High resistance
Hygiene
Thermal resistance
Underfloor heating
designed top embossing and
TopClean XPTM PUR reinforcement
Bfl s1 glued over any A2fl or A1fl
substrate (on cement)
Cfl s1 glued over any derivative wood
substrate
EN ISO 9239-1
EN ISO 11925-2
Slip resistance
• Easy maintenance thanks to specially
SPECIFIC
SOLUTIONS
ISO 24343-1 (EN 433)
requirement
designs for superb performance in wet
areas
Group T : ≤ 2.0 mm3
Technical performances
Residual indentation
• From class A to class C depending on
*except recycled content
(1)
*TVOC AT 28 DAYS
For all products produced in 2015
Logistics Information
The above information is subject to modifications for the benefit of further improvement (07/2015).
For more detailed technical information, please contact Tarkett.
Available in rolls
Rolls length: approx. 20lm
Laying direction:
Stone
Water rings
Fiber wood
General Information
Multisafe Aqua
0120- 054-DoP-2014- 05
http://professionals.tarkett.com
Manufactured by: Tarkett France
08200 Sedan - FRANCE
GJ
According to European
Classification ISO 10874
Turquoise
EN 14041:2004
25912 206
Play with the Room Designer
See page 510 for coordinated accessories offer
269
iQ OPTIMA 1.5mm
iQ Optima 1.5mm - 3247825
3247 821
3247 825
3247 836
3247 866
270
3247 850
3247 856
3247 862
3247 864
3247 857
TECHNICAL DATA
STANDARDS
iQ Optima 1.5 mm
iQ OPTIMA 1.5mm
Classification
Type of floor covering
EN 649
Classification
ISO 10874 (EN 685)
commercial
industrial
Classes:
32
41
Total thickness
ISO 24346 (EN 428)
1.50mm
Wear layer thickness
ISO 24340 (EN 429)
1.50mm
Total weight
ISO 23997 (EN 430)
2 100g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
Homogeneous compact vinyl
Characteristics
—
≤ 2.00mm3
—
Technical performances
Average measured value
Residual indentation
ISO 24343-1 (EN 433)
requirement
ISO 23999 (EN 434)
Curl resultant to heat
EN 424
Reaction to fire
EN 13501-1
EN ISO 9239-1
EN ISO 11925-2
Slip resistance
DIN 51130
EN 13893
Bare foot test
DIN 51097
≤ 0.10mm
0.20%
—
• Elegant natural travertine design
• 10 colourways, allowing great colour
choice
• 1.5mm version also ideal as wall
covering, installed vertically or
horizontally for fewer seams
• Quality and composition of the whole
construction give superior cleaning
characteristics
• Best life cycle cost
Surface Treatment
SPECIFIC
SOLUTIONS
Dimensional stability
0.02mm
Main Product Features
Bfl s1
≥ 8 kW/m2
Pass
iQ
Simply the best
R9
≥ 0.3
—
Seam strength
(N/50mm)
EN 684
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Static electrical charge
EN 1815
< 2kV
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
Fungi and bacteria
resistance
ISO 846: Part C
Thermal resistance
Underfloor heating
EN ISO 10456
Sustainability Tag
100%
< 10 µg/m 3
Optimal Indoor
Air Quality
Recyclable
7
Excellent
*TVOC AT 28 DAYS
Logistics Information
Does not favour growth
0.015m2 K/W
Suitable - max 27°C
The above information is subject to modifications for the benefit of further improvement (07/2015).
Available in rolls
Rolls length: approx. 30lm
For more detailed technical information, please contact Tarkett.
Laying direction:
General Information
iQ Optima
0019-0003-DoP-2013-07
http://professionals.tarkett.com
EN 14041:2004
Manufactured by: Tarkett AB
SE-372 81 Ronneby, Sweden
FI
According to European
Classification ISO 10874 (EN 685)
Play with the Room Designer
See page 510 for coordinated accessories offer
271
SAFETRED AQUA
26769 007
272
Mint
26769 011
26769 008
26769 012
26769 003
Sand
Steel
Titanium
26769 009
26769 013
Dark Blue
26769 015
Light Grey
26769 001
Sky Blue
Rust
Chocolate
Safetred Aqua - 26769013
TECHNICAL DATA
Safetred Aqua
STANDARDS
SAFETRED AQUA
Classification
Heterogeneous compact vinyl
for use in wetrooms
Type of floor covering
EN 649
Classification
EN 13845
domestic
commercial
Classes:
23
34
Total thickness
ISO 24346 (EN 428)
2.00mm
Wear layer thickness
ISO 24340 (EN 429)
—
Total weight
ISO 23997 (EN 430)
3 275g/m2
Wear layer
reinforcement
—
—
Abrasion group
Volume loss
EN 660-2
—
Abrasion
EN 13845 Annex D
Main Product Features
• Class B for superb performance
in wet areas
Characteristics
≤ 10% particle loss after 50,000 cycles
Technical performances
• Bare foot comfort in wet areas
• Safety Clean XP surface for ease
TM
of maintenance
• Improved flexibility for ease
of installation in falls and drains
• Sustainable slip resistance throughout
product life
Average measured value
Residual indentation
≤ 0.10mm
ISO 24343-1 (EN 433)
requirement
ISO 23999 (EN 434)
Curl resultant to heat
EN 434
Reaction to fire
EN 13501-1
≤ 0.4%
≤ 2mm
Bfl s1 on concrete
EN ISO 9239-1
EN ISO 11925-2
Slip resistance
Surface Treatment
SPECIFIC
SOLUTIONS
Dimensional stability
≥ 8 kW/m²
TRRL Pendulum 4S
(Wet) BS 7976 part 2
DIN 51130
EN 13893
Surface roughness Rz
DIN 51097
EN 13845 Annex C (Esb/Esf)
≥ 36
Sustainability Tag
R10
> 20 µm
B
(1)
100%
40%
*
< 100 µg/m3
Better Indoor
Air Quality
Recyclable
Recycled content
*except recycled content
*TVOC AT 28 DAYS
Bare foot test
DIN 51097
—
(1)
Seam strength
(N/50mm)
EN 684
—
Logistics Information
EN 1815
< 2 kV on concrete
EN 1081
EN 14041
< 109 Ω on concrete
Antistatic on concrete
Static electrical charge
Light fastness
EN ISO 105-B02
Chemical resistance
ISO 26987 (EN 423)
Fungi and bacteria
resistance
ISO 846: Part C
Thermal resistance
Underfloor heating
EN ISO 10456
7
For all products produced in 2015
Available in rolls
Rolls length: approx. 20lm
Good resistance
—
Laying direction:
Suitable - max 27°C
The above information is subject to modifications for the benefit of further improvement (07/2015).
General Information
Safetred Aqua
For more detailed technical information, please contact Tarkett.
0170-0017-DoP-2014-08
http://professionals.tarkett.com
Heather
EN 14041:2004
Manufactured by: Tarkett Ltd
Lenham ME17 2QX, England
F
According to European
Classification EN 13845
Play with the Room Designer
26769 010
See page 510 for coordinated accessories offer
273
AQUARELLE FLOOR
Pastille - Turquoise
25905 035
25905 148
25905 149
Black and White
Red
Blue
Turquoise
Pebble
Anthracite
Pastille
25905 150
25905 039
25905 031
25905 144
Aluminium
25905 029
Beige
Grey
Dark Grey
Kiruma
Blue
25905 146
25905 145
274
TECHNICAL DATA
STANDARDS
Aquarelle Floor
AQUARELLE FLOOR
Classification
Type of floor covering
EN 649
Classification
ISO 10874 (EN 685)
commercial
Heterogeneous compact vinyl
for use in wetrooms
Class:
31
Main Product Features
• Waterproof installation, ideal for wet
domestic applications
Characteristics
Total thickness
ISO 24346 (EN 428)
1.50mm
Wear layer thickness
ISO 24340 (EN 429)
0.35mm
Total weight
ISO 23997 (EN 430)
2 400g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
—
≤ 2.00mm3
• Unique wetroom concept: floors, walls
and accessories available (compatible
with Granit and/or Aquarelle Wall)
• Fresh colours and modern designs
• Hygienic and easy to maintain
Surface Treatment
—
Technical performances
SPECIFIC
SOLUTIONS
Average measured value
Residual indentation
ISO 24343-1 (EN 433)
requirement
≤ 0.10mm
Dimensional stability
ISO 23999 (EN 434)
Curl resultant to heat
EN 434
Reaction to fire
EN 13501-1
Bfl s1 glued over any A2fl or A1fl substrate
Slip resistance
DIN 51130
EN 13893
*
≥ 0.3
Bare foot test
DIN 51097
*
Sustainability Tag
(1)
≤ 8mm
—
Seam strength
(N/50mm)
EN 684
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Static electrical charge
EN 1815
< 2kV
Light fastness
EN ISO 105-B02
≥6
Chemical resistance
ISO 26987 (EN 423)
—
Fungi and bacteria
resistance
ISO 846: Part C
—
Thermal resistance
Underfloor heating
EN ISO 10456
100%
*
*except recycled content
(1)
*TVOC AT 28 DAYS
For all products produced in 2015
Logistics Information
Available in rolls
Rolls length: approx. 20lm
Laying direction:
General Information
0.02m2 K/W
Suitable
Aquarelle Floor
0131-0043-DoP-2013-07
http://professionals.tarkett.com
* Not required.
Manufactured by: Tarkett GDL S.A.
Lentzweiler - LUXEMBOURG
The above information is subject to modifications for the benefit of further improvement (07/2015).
< 10 µg/m 3
Optimal Indoor
Air Quality
Recyclable
EN 14041:2004
E
According to European
Classification ISO 10874 (EN 685)
For more detailed technical information, please contact Tarkett.
Play with the Room Designer
See page 510 for coordinated accessories offer
275
AQUARELLE FLOOR
Oak - Grey
25905 141
25905 142
25905 143
Grey
Beige
Dark Grey
25905 014
Anthracite
Variata
Light Grey
Aquastone
25905 138
25905 139
25905 140
25905 132
25905 134
Teak
25905 022
Skiffer
25905 147
White
25905 038
Grey
Black
White
Oak
25905 037
Anthracite
Dark Grey
Beige
Dark Grey
Skiffer
276
25905 133
TECHNICAL DATA
STANDARDS
Aquarelle Floor
AQUARELLE FLOOR
Classification
Type of floor covering
EN 649
Classification
ISO 10874 (EN 685)
commercial
Heterogeneous compact vinyl
for use in wetrooms
Class:
31
Main Product Features
• Waterproof installation, ideal for wet
domestic applications
Characteristics
Total thickness
ISO 24346 (EN 428)
1.50mm
Wear layer thickness
ISO 24340 (EN 429)
0.35mm
Total weight
ISO 23997 (EN 430)
2 400g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
—
≤ 2.00mm3
• Unique wetroom concept: floors, walls
and accessories available (compatible
with Granit and/or Aquarelle Wall)
• Fresh colours and modern designs
• Hygienic and easy to maintain
Surface Treatment
—
Technical performances
SPECIFIC
SOLUTIONS
Average measured value
Residual indentation
ISO 24343-1 (EN 433)
requirement
Dimensional stability
ISO 23999 (EN 434)
Curl resultant to heat
EN 434
Reaction to fire
≤ 0.10mm
—
Sustainability Tag
(1)
≤ 8mm
100%
EN 13501-1
Bfl s1 glued over any A2fl or A1fl substrate
Recyclable
Slip resistance
DIN 51130
EN 13893
*
≥ 0.3
Bare foot test
DIN 51097
—
Seam strength
(N/50mm)
EN 684
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Static electrical charge
EN 1815
< 2kV
Light fastness
EN ISO 105-B02
≥6
Chemical resistance
ISO 26987 (EN 423)
—
Fungi and bacteria
resistance
ISO 846: Part C
—
Thermal resistance
Underfloor heating
EN ISO 10456
*
*except recycled content
(1)
< 10 µg/m 3
Optimal Indoor
Air Quality
*TVOC AT 28 DAYS
For all products produced in 2015
Logistics Information
Available in rolls
Rolls length: approx. 20lm
Laying direction:
Teak
Oak
0.02m2 K/W
Suitable
General Information
Aquarelle Floor
0131-0043-DoP-2013-07
http://professionals.tarkett.com
* Not required.
Manufactured by: Tarkett GDL S.A.
Lentzweiler - LUXEMBOURG
The above information is subject to modifications for the benefit of further improvement (07/2015).
EN 14041:2004
E
According to European
Classification ISO 10874 (EN 685)
For more detailed technical information, please contact Tarkett.
Play with the Room Designer
See page 510 for coordinated accessories offer
277
AQUARELLE FLOOR DESIGN
Istanbul - Medium Grey
Ceramica
24554 001
24554 002
Beige
Dark Grey
Medium Grey
Istanbul
24554 004
Black and White
Grey
Square
24554 003
278
24554 005
TECHNICAL DATA
STANDARDS
Aquarelle Floor Design
Classification
ISO 10874 (EN 685)
commercial
Class:
31
Total thickness
ISO 24346 (EN 428)
2.0mm
Wear layer thickness
ISO 24340 (EN 429)
0.40mm
Total weight
ISO 23997 (EN 430)
2 150g/m2
Wear layer
reinforcement
—
Abrasion group
Volume loss
EN 660-2
Abrasion
EN 13845 Annex D
Classification
Characteristics
AQUARELLE FLOOR
DESIGN
Main Product Features
—
• Waterproof installation, ideal for wet
domestic applications
• New 3m width rolls
• Unique wetroom concept: floors, walls
and accessories available (compatible
with Granit and/or Aquarelle Wall)
≤ 2.00mm3
—
Technical performances
• Fresh colours and modern designs
• Hygienic and easy to maintain
Average measured value
ISO 24343-1 (EN 433)
requirement
≤ 0.10mm
Dimensional stability
ISO 23999 (EN 434)
Curl resultant to heat
EN 434
Reaction to fire
EN 13501-1
Cfl s1 glued over any A2fl or A1fl substrate
Slip resistance
DIN 51130
EN 13893
*
≥ 0.3
Bare foot test
DIN 51097
—
Surface Treatment
SPECIFIC
SOLUTIONS
Residual indentation
—
≤ 8mm
Sustainability Tag
(1)
Average value
≥ 240 N/50mm
Individual values ≥ 180 N/50mm
Seam strength
(N/50mm)
EN 684
Static electrical charge
EN 1815
Light fastness
EN ISO 105-B02
≥6
Chemical resistance
ISO 26987 (EN 423)
—
Fungi and bacteria
resistance
ISO 846: Part C
—
Thermal resistance
Underfloor heating
EN ISO 10456
< 2kV
0.02m2 K/W
Suitable
* Not required.
The above information is subject to modifications for the benefit of further improvement (07/2015).
100%
*
Recyclable
*except recycled content
(1)
< 10 µg/m 3
Optimal Indoor
Air Quality
*TVOC AT 28 DAYS
For all products produced in 2015
Logistics Information
Available in: 3m rolls
Rolls length: approx. 23lm
Laying direction:
General Information
For more detailed technical information, please contact Tarkett.
Aquarelle Floor
0131-0005-DoP-2013-07
http://professionals.tarkett.com
Manufactured by: Tarkett GDL S.A.
Lentzweiler - LUXEMBOURG
EN 14041:2004
E
According to European
Classification ISO 10874 (EN 685)
Play with the Room Designer
See page 510 for coordinated accessories offer
279