FS 800 FS 1000 FS 1200

FS 800 1000 1200
Product Sales Guide
High spin, freestanding washer extractors
Version: 1.4
Range
FS 800
FS 1000
FS 1200
80 kg
100 kg
120 kg
Drum volume (l)
807
1003
1180
RPM
750
720
695
G-factor
350
350
350
Capacity
Overview
Programmer
Soap box
XControl Plus
Door
Door handle
Service panel
Full FS Range
Cabinet: Stainless steel identity
STANDARD
high quality stainless steel AISI 304
•
Panels are easy to remove: easy access to all parts - Service friendly
Side panels
•
High quality stainless steel AISI 304
•
Side panels can be removed:
- Easy access to all parts
- It can be removed in parts
(3 panels – electrical switchboard side)
(3 panels – soap hopper side FS800)
(2 panels – soap hopper side FS1000/1200)
Bearing house
•
Bearing house in cast iron out of 1 piece: No bolts or welds
•
Sandblasted and degreased
•
Black painted
•
1+1 bearings per model
Advantage: cost efficient,
long life span
Drain valves
•
Attached to the frame directly under the tub:
=> Lower water consumption
•
Standard 2x103 drain valves: small objects are removed
•
90°drainvalve: Auto-rinsing effect
behind the valve
•
Standard 2 drain valves per model for
fast evacuation: Short cycles
•
Water recuperation is possible
Suspension
•
Freestanding machines: Low installation cost
•
The washing unit is suspended on shock absorbers and springs
•
Vibrations damped by shock absorbers
•
Due to this suspension the machine runs very smoothly
Springs
Lat. shock absorbers
FS 800
6
6
FS 1000
6
8
FS 1200
6
8
Lateral shock absorbers
Spring
Pulleys
•
High quality cast steel for long life span
•
Easy to remove for efficient service
V-belts
•
6 V-belts (FS 800)
•
5 V-belts (FS 1000/1200)
•
Easy to remove
•
Life span of approximately 5 years
•
Tension is regulated by motor shift
Advantage:
•
A correct belt tension guarantees
a long life span of a belt
•
Easy to adjust
Water inlets
•
Standard three high volume inlet valves
•
Standard cool down
•
1 ½“ inlet pneumatic valves
Unbalance switch
•
1 per machine, is positioned in front of the tub
•
Steel spring is activated during high unbalances
•
Is positioned in the factory
•
With extreme unbalances:
The machine will repeat maximum
10 times (is not changeable)
•
Activated when unbalances occurduring:
- low spin
- high spin
Note: During installation & service always check if the
unbalance switches are well positioned
Soap box
•
Soapbox in standard execution
•
Mounted on the right side: Easy access
•
5 plastic removable compartments
•
Plastic cups of 1 liter each
Liquid soap connection
•
Liquid soap connection: 1x ½“
FS800
FS1000/1200
Option:
Manifold – system for mixing water and liquid soaps for external dosing
of detergents (up to 6 detergents can be connected to 1 Manifold). Washers can
operate max 8 signals.
Inner drum
•
High quality of stainless steel
•
6 lifting ribs for ideal mechanical action
•
Lifting ribs are perforated: PowerWash®
FS 800
FS 1000
FS 1200
(l)
807
1003
1180
Drum diameter
(mm)
1110
1200
1300
Drum depth
(mm)
838
860
870
Drum volume
- more mechanical action
- lower water consumption
Shaft
•
Special black steel: Optimal strength
•
Shaft is connected to drum
•
Oversized diameters
Frame
•
High quality steel
•
Sand blasted and degreased
•
Powder painted
Outer tub
•
High quality stainless steel AISI 304 interspace inside
of the outer drum
•
Outer drum made from black steel
stainless steel
black steel
Door
•
Very strong door glass resistant to high temperatures (100°C)
•
Very large door openings for easy
loading and unloading
•
Stainless steel door frame
Door opening Ø
FS 800
FS 1000
FS 1200
530 mm
530 mm
650 mm
Door hinges
•
Extra strong door hinges
•
Combination of stainless steel
and plastic rings for long life span
Door lock
•
Safety
•
Strong overdimensioned
•
Easy opening
XControl Plus programmer
•
20 pre-set programs (up to 99)
•
20 languages
•
Free programable
•
Factory pre-set settings:
• 5x Intensive
• 4x Standard
• 4x Eco
• 2x Extraction
• 5x Special (Sport, Mops, Jeans,..)
•
Extra wash / drain steps:
- Spray
- Static drain
- Cool down
- Reverse drain
- Soak
• Semi-automatic weighing system -
Seal
•
Radial inox plate and 2 Viton lip seals on drum plate + 1 radial
seal on front of bearing
•
Viton resists to almost all laundry chemicals
•
Radial seal have 2 functions:
- Keeps out humidity and water from the bearings
- Keeps the grease in the bearings
Safety
•
FS machines correspond to all CE and EMC directives
•
Noise level below 74 dB
•
Standard: Emergency button
•
One mainswitch
•
Buzzer at the end of the cycle
Heating
Electrical heating
•
Positioned bellow drum in the heating
chamber at the side of the drum
•
Easy access for quick service
•
Short washing programs
heating elements
Heating
(kW)
FS 800
FS 1000
FS 1200
67,5
-
-
Heating
Steam heating
•
Direct steam
•
Required number of bars: 3 - 8 bar
•
Positioned bellow drum in the heating
chamber at the side of the machine
•
Steam inlet 1“
Input of
steam
Drive
FS 800
FS 1000
FS 1200
Motor power
(kW)
11
15
18.5
Wash speed
(rpm)
36
33
32
Spin speed
(rpm)
750
720
695
350
350
350
G factor
Voltages
3x208-240V 50/60Hz
3x380-480V 50/60Hz
Option: Tilting
• For easy loading and unloading
• Pneumatic tilting option: forward only
forward and backward
• Tilting angle is 13°
• Tilting device is connected with washer and can be operated either by
XControl Plus control or by external wired control.
Option: Optiload®
• Optiload® allows automatic adjustment of water levels, heating times and
liquid detergent consumption depending on the weight of linen
•
Informations about weight of the load are shown on the washer display
•
Feet with weighing sensors are attached on the bottom of washer frame
Foot with weighing sensor
Sensors position
Option: Warning light & horn
• A warning light & horn will be activated when program is finished
Transport
Net weight
Gross
weight
Dimensions
(HxWxD)
Transport
dimensions
(HxWxD*)
Volume
(kg)
(kg)
(mm)
(mm)
(m3)
FS 800
2640
2830
2010x1495x1940
2200x1690x1950
7.25
FS 800
FS 1000
3170
3410
2060x1790x2005
2345x1865x2125
9.29
FS 1000
FS 1200
3480
3710
2085x1855x2085
2340x2000x2170
10.16
FS 1200
Markets
This is a non-binding and indicative tool made available to Primus distributors for internal
use only. Proprietary rights with regard to this tool belong to Primus CE s.r.o. No
guarantee can be given that its results are up-to-date and accurate and it should therefore
be used with particular circumspection. This tool should by no means be transmitted to
any third party or otherwise made public. Please inform Primus’ marketing team of any
remark you have in respect of this tool.
© 2014 Primus CE s.r.o. All rights reserved.
Visit our Primus channels: