USB 2.0 High-Flex

JARGY CO., LTD.
USB 2.0 High-Flex (Continuous-Flex) Cable Material
SPECIFICATIONS
1.SCOPE
This specification covers the requirement for UL 2725 COMPLEX 4C. - USB 2.0
2.CONSTRUCTION
The conductor consists of 19 strands of No. 39 AWG Tin Coated Annealed
CONDUCTOR
Copper Wires and 50 strands of No. 40 AWG Annealed Copper Wires and is in
accordance with UL 758.
INSULATION
HDPE & SR-PVC covered with the thickness provided in Table-1. Minimum
average thickness : more than 90% of figures provided in Table-1.
IDENTIFICATION Identified by insulation color and twisted as the following Appendix.
ASSEMBLY
Number of conductors provided in Table-1 twisted together. In case of need,
tape and/or fillers may be applied.
Fillers : NONE.
Tape : ALUMINUM MYLAR TAPE.
Drain Wire : 7/0.127TA.
SHIELD
Braid Shield over the assembly.
Shielding area more than 80% of the total assembly.
JACKET
PVC covered with the thickness provided in Table-1. Minimum average
thickness : more than 90% of figures provided in Table-1.
Color : Black.
MARKING
Letter :
Jargy Hi-Flex (Continuous-Flex) USB2 Hi-Speed Cable
AWM 2725 VW-1 80 ℃ 30V
Ink Color : White
3.CHARACTERISTICS
ITEM
19/0.1TA
20℃
Conductor Resistance
50/0.08AC
20℃
AIR
Dielectric Strength
20℃
Insulated Resistance
Flexing
CHARACTERISTICS
MAX 144
Ω/Km
MAX 78.8
Ω/Km
AC
500
V/min
MIN
100
MΩ-Km
TYPE-U R=67.5mm(12.5D) MIN
5,000,000 times
MIN
1,000,000 times
TYPE-S R=60mm
1,000,000 times
90° BENDING R=60mm MIN
TEST METHHOD
UL2556 SECTION 3.4
UL2556 SECTION 3.4
UL2556 SECTION 6.2
UL2556 SECTION 6.4
Jargy Spec
Jargy Spec
Jargy Spec
JARGY CO., LTD.
TABLE-1
USB 2.0 High-Flex (Continuous-Flex) Cable Material
SPECIFICATIONS
CORE
No. 1
No. 2,3
1P(Pair)
2C(Core)
26
24
19/0.1TA
50/0.08AC
DIAMETER Approx. Mm
0.5
0.65
THICKNESS mm
0.25
0.23
DIAMETER Approx. mm
1.0
1.1
CONSTRUCTION
Pair
DIAMETER Approx. Mm
2.0
CORE NUMBER
A
CONDUCTOR
B
INSULATION
C
ASSEMBLY
D
ASSEMBLY
E
TAPING
F
CONSTRUCTION
CONSTRUCTION
DIAMETER Approx. Mm
CONSTRUCTION
LAYER
3.0
ALUMINUM MYLAR TAPE
DRAIN WIRE CONSTRUCTION
7/0.127TA
CONSTRUCTION
16/7/0.1TA
G BRAID SHIELD
H
CROSS-SECTION AREA AWG
JACKET
DIAMETER Approx. Mm
3.6
THICKNESS mm
0.9
DIAMETER Approx. mm
APPENDIX
IDENTIFICATION:
1.Green ; White
2.Black
3.Red
5.4 ± 0.2
JARGY CO., LTD.
USB 3.0 High-Flex (Continuous-Flex) Cable Material
SPECIFICATIONS
1.SCOPE
This specification covers the requirement for UL 20276 COMPLEX 5C. - USB 3.0
2.CONSTRUCTION
The conductor consists of 7 strands of No. 36 AWG Tin Coated Annealed
CONDUCTOR
Copper Wires and 108 strands of No. 40 AWG Annealed Copper Wires and is in
accordance with UL 758.
INSULATION
FOAM-PE & SR-PVC covered with the thickness provided in Table-1. Minimum
average thickness : more than 90% of figures provided in Table-1.
SKIN
HDPE covered with the thickness provided in Table-1. Minimum average
thickness : more than 90% of figures provided in Table-1.
IDENTIFICATION Identified by insulation color and twisted as the following Appendix.
ASSEMBLY
Number of conductors provided in Table-1 twisted together. In case of need,
tape and/or fillers may be applied.
Fillers : COTTON FILLER.
Tape : ALUMINUM MYLAR TAPE and MYLAR TAPE.
Drain Wire : 7/0.127TA.
SHIELD
Braid Shield over the assembly.
Shielding area more than 80% of the total assembly.
JACKET
PVC covered with the thickness provided in Table-1. Minimum average
thickness : more than 90% of figures provided in Table-1.
Color : Blue.
MARKING
Letter :
Jargy Hi-Flex (Continuous-Flex) USB3 SuperSpeed Cable
AWM 20276 VW-1 80℃ 30V
Ink Color : White
3.CHARACTERISTICS
ITEM
7/0.127TA
20℃
Conductor Resistance
108/0.08AC
20℃
AIR
Dielectric Strength
20℃
Insulated Resistance
Flexing
CHARACTERISTICS
MAX 228
Ω/Km
MAX 36.5
Ω/Km
AC
500
V/min
MIN
100
MΩ-Km
TYPE-U R=87mm (15D) MIN
5,000,000 times
TYPE-S R=60mm
MIN
1,000,000 times
90° BENDING R=60mm MIN
1,000,000 times
TEST METHHOD
UL2556 SECTION 3.4
UL2556 SECTION 3.4
UL2556 SECTION 6.2
UL2556 SECTION 6.4
Jargy Spec
Jargy Spec
Jargy Spec
JARGY CO., LTD.
TABLE-1
USB 3.0 High-Flex (Continuous-Flex) Cable Material
SPECIFICATIONS
CORE
No. 1, 3
No. 2
2P(Pair)
1C(Core)
28
20
7/0.127TA
108/0.08AC
DIAMETER Approx. Mm
0.38
1.0
THICKNESS mm
0.25
0.25
DIAMETER Approx. mm
0.88
1.5
THICKNESS mm
0.05
DIAMETER Approx. mm
1.0
CONSTRUCTION
Pair
DIAMETER Approx. Mm
2.0
CORE NUMBER
A
CONDUCTOR
B
INSULATION
C
SKIN
D
ASSEMBLY
E
F
CROSS-SECTION AREA AWG
CONSTRUCTION
DRAIN WIRE CONSTRUCTION
TAPING
CONSTRUCTION
7/0.127TA
ALUMINUM MYLAR TAPE
G
TAPING
H
ASSEMBLY
I
FILLERS
CONSTRUCTION
COTTON FILLER
J
TAPING
CONSTRUCTION
ALUMINUM MYLAR TAPE
CONSTRUCTION
16/10/0.12TA
K BRAID SHIELD
L
JACKET
CONSTRUCTION
CONSTRUCTION
DIAMETER Approx. Mm
MYLAR TAPE
LAYER
4.2
DIAMETER Approx. Mm
4.8
THICKNESS mm
0.5
DIAMETER Approx. mm
APPENDIX
IDENTIFICATION:
1.Blue ; Yellow
2.Red
3.Purple ; Orange
5.8 ± 0.2