magnetic systems

MINING
INDUSTRY
POWER
ENGINEERING
RECYCLING
FOOD
INDUSTRY
MAGNETIC
TRANSPORT
magnetic systems
APPLICATIONS
WASTE SORTING PLANTS
POWER STATIONS, MINES,
CEMENT PLANTS
FOOD AND CHEMICAL PLANTS
STEELWORKS, RAIL AND SEAPORTS,
FOUNDRIES
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
2
www.magnetix.com.pl
municipal waste
rubber
plastics
glass
biomass
aggregates
cement
agricultural products
sugar
chocolate
chemicals
rods, tubes, profiles
sheets
castings
ferrous scrap
coal
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
3
OVER-BELT SEPARATORS
ELECTROMAGNETIC SEPARATOR
TYPE STE
MAGNETIC SEPARATOR
TYPE STM
PROPERTIES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Range: max. 700 mm
Working width: max. 2000 mm
Duty cycle: S1-100%
Power of electromagnet: 3 ÷ 28 kW
Cleaning method: automatic
Belt drive: NORD / SEW geared motor
Explosion hazard zone: 21, 22
Range: max. 500 mm
Working width: max. 2000 mm
Duty cycle: S1-100%
Type of magnetic material: Ferrite / NdFeB
Cleaning method: automatic
Belt drive: NORD / SEW geared motor
Explosion hazard zone: 21, 22
APPLICATIONS
• Automatic removal of tramp iron contaminants from bulk materials
transported on conveyor belts or vibratory feeders.
• Protection of process machines against damage caused
by an unwanted piece of ferrous metal.
• Recovery of ferrous scrap from waste materials.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
4
www.magnetix.com.pl
MAGNETIC BLOCK
TYPE PMT
PROPERTIES
•
•
•
•
•
•
Range: max. 500 mm
Working width: max. 2000 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: manual
Belt drive: Explosion hazard zone: not applicable
APPLICATIONS
• Removal of tramp iron contaminants from bulk materials
transported on conveyor belts or vibratory feeders.
• Protection of process machines against damage
caused by an unwanted piece of ferrous metal.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
5
NON-FERROUS METALS SEPARATORS
EDDY CURRENT SEPARATOR
TYPE SWP STRONG
EDDY CURRENT SEPARATOR
TYPE SWP MAXX
PROPERTIES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Working width: max. 2000 mm
Diameter of magnetic rotor: 350 mm
Type of magnetic material: NdFeB
Number of magnetic poles: 12
Rotational speed of rotor: max. 2000 min-1
Size of separated metals: > 10 mm
Belt speed: 0,5 ÷ 2,5 m/s
Rotor drive: NORD motor
Belt drive: NORD geared motor
Explosion hazard zone: 21, 22
Working width: max. 1500 mm
Diameter of magnetic rotor: 350 mm
Type of magnetic material: NdFeB
Number of magnetic poles: 18
Rotational speed of rotor: max. 4000 min-1
Size of separated metals: > 1 mm
Belt speed: 0,5 ÷ 2,5 m/s
Rotor drive: NORD motor
Belt drive: NORD geared motor
Explosion hazard zone: 21, 22
APPLICATION
• Separation of non-ferrous metals from recyclable materials.
• Recovery of non-ferrous metals from waste materials.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
6
www.magnetix.com.pl
Recovery of aluminium cans from municipal waste.
Recovery of non-ferrous metals from electronic waste.
Aluminium dross recycling.
Recovery of non-ferrous metals from shredded fridges.
Separation of non-ferrous metals from glass cullet.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
7
DRUM AND PULLEY SEPARATORS
ELECTROMAGNETIC PULLEY
TYPE BME
MAGNETIC PULLEY
TYPE BMF / BMN
PROPERTIES
•
•
•
•
•
•
•
Diameter of magnetic pulley: 320 ÷ 1000 mm
Working width: max. 2000 mm
Range: max. 300 mm
Power of electromagnet: 1 ÷ 15 kW
Cleaning method: automatic
Pulley drive: on request
Explosion hazard zone: 21, 22
•
•
•
•
•
•
•
Diameter of magnetic pulley: 250 ÷ 800 mm
Working width: max. 2000 mm
Range: max. 200 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: automatic
Pulley drive: on request
Explosion hazard zone: not applicable
APPLICATIONS
• Automatic removal of large and small tramp iron contaminants
from bulk materials transported on conveyor belts.
• Protection of process machines against damage caused
by an unwanted piece of ferrous metal.
• Recovery of ferrous scrap from waste materials.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
8
www.magnetix.com.pl
MAGNETIC DRUM
TYPE BMR
MAGNETIC DRUM SEPARATOR
TYPE SBM
PROPERTIES
•
•
•
•
•
•
•
•
•
•
•
•
•
Diameter of magnetic drum: 200 ÷ 630 mm
Working width: max. 2000 mm
Range: max. 150 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: automatic
Drum drive: on request
Explosion hazard zone: 21, 22
Output: max. 350 m3/h
Type of magnetic material: Ferrite / NdFeB
Cleaning method: automatic
Drum drive: NORD / SEW geared motor
Housing: stainless steel
Explosion hazard zone: 21, 22
APPLICATIONS
• Automatic removal of tramp and fine iron contaminants
from bulk materials.
• Protection of process machines against damage caused
by an unwanted piece of ferrous metal.
• Recovery of ferrous scrap from waste materials.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
9
PLATE AND CONE SEPARATORS
MAGNETIC PLATE
TYPE PM
MAGNETIC PLATE SEPARATOR
TYPE SPM
PROPERTIES
•
•
•
•
•
Working width: 200 ÷ 2000 mm
Range: max. 150 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: manual
Explosion hazard zone: not applicable
•
•
•
•
•
•
Inlet diameter: 100 ÷ 700 mm
Output: max. 350 m3/h
Installation height: 500 ÷ 1100 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: manual
Explosion hazard zone: not applicable
APPLICATIONS
• Removal of tramp and fine iron contaminants from bulk materials
transported in free-fall chutes or pneumatic pipelines.
• Protection of process machines against damage caused
by an unwanted piece of ferrous metal.
• Consumer protection against eating dangerous metal pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
10
www.magnetix.com.pl
MAGNETIC CONE SEPARATOR
TYPE SMS
PROPERTIES
•
•
•
•
•
•
Inlet diameter: 100 ÷ 700 mm
Output: max. 350 m3/h
Installation height: 500 ÷ 1100 mm
Type of magnetic material: Ferrite / NdFeB
Cleaning method: manual
Explosion hazard zone: not applicable
APPLICATIONS
• Removal of tramp and fine iron contaminants from bulk materials
transported in free-fall chutes or pneumatic pipelines.
• Protection of process machines against damage caused
by an unwanted piece of ferrous metal.
• Consumer protection against eating dangerous metal pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
11
GRATE SEPARATORS
MAGNETIC FILTER
TYPE FM
MAGNETIC GRATE
TYPE SM
PROPERTIES
•
•
•
•
•
•
•
Inlet diameter: 100 ÷ 400 mm
Output: max. 110 m3/h
Number of magnetic bar rows: 1 ÷ 4
Type of magnetic material: NdFeB
Installation height: 290 ÷ 680 mm
Cleaning method: semi-automatic
Explosion hazard zone: not applicable
•
•
•
•
•
•
Inlet diameter: 50 ÷ 300 mm
Flow rate: max. 4500 l/min
Working pressure: max. 5 bar
Type of magnetic material: NdFeB
Cleaning method: semi-automatic
Explosion hazard zone: not applicable
APPLICATIONS
• Removal of fine iron contaminants from fine-grained
bulk materials transported in free-fall chutes.
• Consumer protection against eating dangerous
metal pieces.
• Removal of fine iron contaminants from fluid or semifluid materials transported in pressure pipelines.
• Protection of pumps, centrifuges and dosing machines.
• Consumer protection against eating dangerous metal
pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
12
www.magnetix.com.pl
MAGNETIC GRATE
TYPE SMA
PROPERTIES
•
•
•
•
•
•
•
Inlet: max. 500 × 500 mm
Output: max. 110 m3/h
Number of magnetic bar rows: 3
Type of magnetic material: NdFeB
Installation height: 650 mm
Cleaning method: automatic (pneumatic)
Explosion hazard zone: 21, 22
APPLICATIONS
• Automatic removal of fine iron contaminants from fine-grained
bulk materials transported in free-fall chutes.
• Consumer protection against eating dangerous metal pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
13
METAL DETECTORS
TUNNEL METAL DETECTOR
TYPE DMD
TUNNEL METAL DETECTOR
TYPE DMG
PROPERTIES
•
•
•
•
•
•
Working width: max. 2000 mm
Tunnel hight: max. 1000 mm
Size of detected metal: > 1 mm
Type of controller: digital
Belt speed: 0,3 ÷ 5 m/s
Explosion hazard zone: 21, 22
•
•
•
•
•
•
Working width: max. 1500 mm
Tunnel hight: max. 1000 mm
Size of detected metal: > 0,2 mm
Type of controller: digital
Belt speed: 0,1 ÷ 30 m/s
Explosion hazard zone: 21, 22
APPLICATIONS
• Detection of ferrous and non-ferrous metals
in bulk materials transported on conveyor belts.
• Protection of process machines against damage
caused by an unwanted piece of metal.
• Detection of ferrous and non-ferrous metals
in finished products transported on conveyor belts.
• Consumer protection against eating dangerous
metal pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
14
www.magnetix.com.pl
FLAT METAL DETECTOR
TYPE DMP
METAL SEPARATOR
TYPE DMR
PROPERTIES
•
•
•
•
•
Working width: max. 2000 mm
Size of detected metal: > 1 mm
Type of controller: digital
Belt speed: 0,3 ÷ 3 m/s
Explosion hazard zone: 21, 22
•
•
•
•
•
•
Inlet diameter: 30 ÷ 350 mm
Output: max. 130 m3/h
Size of separated metal: > 0,2 mm
Installation height: 500 ÷ 2000 mm
Ejection system: quick - flap
Explosion hazard zone: 21, 22
APPLICATIONS
• Detection of ferrous and non-ferrous metals
in products lying flat on the belt or bulk materials
with height up to 100 mm.
• Protection of process machines against damage
caused by an unwanted piece of metal.
• Detection and separation of ferrous and non-ferrous
metals from bulk materials transported in free-fall
chutes or pneumatic pipelines.
• Protection of process machines against damage
caused by an unwanted piece of metal.
• Consumer protection against eating dangerous
metal pieces.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
15
LIFTING MAGNETS
LIFTING ELECTROMAGNET
TYPE EO
LIFTING ELECTROMAGNET
TYPE EP
PROPERTIES
•
•
•
•
•
•
Diameter of lifting magnet: 300 ÷ 2200 mm
Lifting capacity: 10 ÷ 170 tonnes
Duty cycle: S3-75% / 10 min
Power of electromagnet: 4 ÷ 40 kW
Magnetic flux density: > 2 T
Body: welded / steel casting
•
•
•
•
•
•
Working surface: adapted to the lifted material
Lifting capacity: 2 ÷ 40 tonnes
Duty cycle: S3-75% / 10 min
Power of electromagnet: max. 20 kW
Magnetic flux density: > 2 T
Body: welded
APPLICATIONS
• Lifting and handling of ferromagnetic materials:
blocks, castings, sheet and wire coils with vertical axis
and ferrous scrap.
• Improvement of steel handling in steelworks, seaports,
foundries, reloading terminals and scrap yards.
• Lifting and handling of ferromagnetic materials: sheets,
slabs, billets, bars, rails, pipes, channels and other
sections, sheet and wire coils with horizontal axis.
• Improvement of steel handling in steelworks, seaports,
steel wholesalers, reloading terminals and plants,
where speed of handling is essential.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
16
www.magnetix.com.pl
SET OF LIFTING MAGNETS
PERMANENT LIFTING MAGNET
TYPE CMP
PROPERTIES
•
•
•
•
•
•
Length of the lifted material: max. 18 m
Lifting capacity: max. 200 tonnes
Duty cycle: S3-75% / 10 min
Power of electromagnet: max. 80 kW
Magnetic flux density: > 2 T
Body: welded
•
•
•
•
•
•
Working surface: adapted to the lifted material
Lifting capacity: max. 1000 kg
Duty cycle: S1-100%
Magnetic material: NdFeB
Disconnection of the magnetic field: pneumatically
Body: welded
APPLICATIONS
• Lifting and handling of ferromagnetic materials:
long sheets, reinforcing bars, rails and sections.
• Improvement of steel handling in steelworks,
seaports, steel wholesalers, reloading terminals
and plants, where speed of handling is essential.
• Lifting, handling and positioning of steel containers,
jars with twist off lids and other packaging having
caps made of ferromagnetic steel.
• Installed on the robot arm can be used for fast
loading or unloading of transport pallets.
Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, [email protected]
17
Magnetix
Poznanska 9
Cierpice
PL / 87-103 Torun 5
Service
T: +48 56 653 94 40 ext. no. 2
T: +48 693 836 028
[email protected]
T: +48 56 653 94 40
T: +48 56 659 17 77
F: +48 56 658 31 19
Transport and logistics
T: +48 56 653 94 40 ext. no. 3
T: +48 601 467 200
[email protected]
Sales department
T: +48 56 653 94 40 ext. no. 1
T: +48 607 430 967
T: +48 693 904 405
[email protected]
Accountancy
T: +48 56 653 94 40 ext. no. 4
[email protected]
Constructor department
[email protected]