Nitidas Textildruck Technische Daten

Textile Printing by nitidas™
Technical References
Print surface
maximum 140 cm x 100 cm
(55 x 393/8 inches)
Individual images in various measurements within this size or fractions
thereof are possible.
Best possible print quality on textiles will be achieved when the data
are prepared as follows:
– ready to print PDF files (ideal) or
– ready to print Macintosh data (QuarkXPress, Adobe Photoshop,
Adobe Illustrator, Adobe InDesign)
– other data formats are available after consultation
– minimum resolution at 100 % size: half tone pictures 250 dpi;
line pictures 1200 dpi, better drawn with Adobe Illustrator
– please supply suitable data carriers (CD, DVD) with a reliable
color-proof per subject
We would be pleased to give you advice and/or to process your ideas
and proposals graphically until you consider them “ready to print”.
One print + different patterns = flexible results
With the nitidas™ printing technology you get the possibility to
actually have individual and optically different patterns within the
maximum print surface, reproduced in one single print run.
Please note:
We deliver only straight cuts!
Fabric delivery by the customer must have the following configuration:
Width of fabric
110 cm bis 112 cm
Tube inside measurements
must be 7,6 cm (standard 3 inch)
Tube strength
diameter of maximum 100 cm
(depending upon fabric weight)
Special measurements and prints must be agreed upon separately.
nitidas™ is a registered trademark of Nitidas AG
www.nitidas.com
Nitidas AG Switzerland
[email protected]