PVC DWV FITTINGS For PLUMBING AND

PVC DWV FITTINGS For PLUMBING AND
MECHANICAL APPLICATIONS
Job Name
Contractor
Job Location
Wholesaler
Engineer
Streamline® Rep
Product Description:
Streamline® PVC DWV fittings for use in applications including sanitary drain, waste, and vent (DWV), sewer, and general drainage
applications. Available in sizes ranging from 1-¼” to 8” in diameter, all fittings should be manufactured in the United States.
Material:
Virgin rigid polyvinyl chloride (PVC) compounds conform to cell class 12454 as defined in ASTM D1784.
Key Specifications:
Streamline® PVC DWV fittings shall be made to meet to ASTM D2665, F1498, and D3311. Third Party Certifications shall be
in place for fittings in compliance with NSF Standard 14. Fittings shall be certified to the Uniform Plumbing Code (UPC) where
applicable.
Installation:
Installation shall comply with the latest applicable building codes for the local jurisdiction. Solvent cement connections shall be made
using a two-step process consisting of primer (in conformance with ASTM F656) and solvent cement (in conformance with ASTM
D2564). For detailed installation instructions, consult the Plumbing Apprentice Training Manual available from PPFA (Plastic Pipe &
Fitting Association) at ppfahome.org.
PVC DWV fittings are not designed for hot water systems but should discharge temperatures should not exceed 140°F. Systems
shall be installed to avoid contact with thread sealants or other chemical agents which are not compatible with PVC. Hydrostatic
testing of the system shall be completed prior to use.
Do not test or use Streamline® plastic products with compressed air or compressed gases.
References:
ASTM D1784
ASTM D2665
ASTM F1498
ASTM D3311
ASTM F656
ASTM D2564
Standard Specification for Rigid Poly Vinyl Chloride (PVC) compounds
Standard Specification for PVC drain, waste, and vent fittings
Taper pipe threads for thermoplastic fittings/fitting threads
Laying lengths of plastic fittings intended for use with outside diameter
controlled pipes in DWV application
Standard specification for primers
Standard specification for solvent cement
Other Applicable Standards:
CSA B181.1
ABS Drain, Waste, and Vent Pipe and Pipe Fittings
NSF Standard 14
Plastic Piping System and Related Components
NSF International
IAPMO
UPCCSA
Made in USA
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 1 of 8
PVC DWV FITTINGS For PLUMBING AND
MECHANICAL APPLICATIONS
SOCKET DIMENSIONS AND TOLERANCES PVC-DWV
A
Trade Sizes
B
Socket Entrance Diameter
Total Average
Tol. A
Out of Round
Socket Bottom Diameter
Total Average
Tol. A
Out of Round
C
D
W
R
Min Socket
Depth
Min Internal
Thread Length
Wall Thickness
Min.
Radius or
45° Chamfer
1-1/4”
1.675
0.024
1.655
0.024
0.687
0.687
0.156
1/16
1-1/2”
1.915
0.024
1.894
0.024
0.687
0.687
0.156
1/16
3/32
2”
2.390
0.024
2.639
0.024
0.750
0.750
0.156
3”
3.520
0.030
3.492
0.030
1.500
1.187
0.219
1/8
4”
4.520
0.030
4.491
0.030
1.750
1.281
0.250
1/8
6”
6.647
0.060
6.614
0.060
3.000
1.500
0.281
1/8
8”
8.655
0.090
8.610
0.090
4.000
1.687
0.328
3/16
Note: “A” Tolerance through 4” + 0.010, -0.005. 6” +0.015, -0.010, 8” +0.030, -0.000
“B” Tolerance 1-1/4” ±0.005, 1-1/2” & 2” ±0.006, 3” ±0.008, 4” ±0.009, 6” ±0.011, 8” ±0.015
SIZING NOMENCLATURE FOR DWV FITTINGS
Multi-Joint Fittings
1 = Bottom Outlet
2 = Top Inlet
3 = Main Branch
4 = Branch, Side Inlet
Two Joint Fittings
1 = Left Side of Fitting
2 = Right Side of Fitting
CONNECTION DESCRIPTIONS
H
Hub
Sp
Spigot (Pipe O.D.)
SJ
Slip Joint
MPT
Male Pipe Thread
FPT
Female Pipe Thread
S/D
Sewer & Drain
NPSM
National Pipe Straight Mechanical Thread
CI
Cast Iron
All 90° Openings Pitch 1/4” Per Foot
(Exception - Vent Fittings)
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 2 of 8
PLASTIC FITTINGS – PLUMBING
PVC DWV
STYLE NO. P100
COUPLING
STYLE NO. P103X
TRAP ADAPTER, MALE,
W / CHROME NUT & WASHER
HxH
Size
1 1/4
1 1/2
2
3
4
6
8
STYLE NO. P106
CLEANOUT PLUG
MPT
SP x SJ
Part #
05932
05933
05934
05935
05936
06143
06145
Ctn
100
100
100
60
25
15
4
Plt
7,200
7,200
4,800
1,440
700
180
80
Size
1 1/2
1 1/2 x 1 1/4
06392
06378
Ctn
50
100
Plt
5,400
7,200
STYLE NO. P104P
TRAP ADAPTER, FEMALE,
W / 1 PIECE POLY NUT
H x SJ
Size
STYLE NO. P101
FEMALE ADAPTER
Part #
1 1/4
1 1/2
1 1/2 x 1 1/4
Part #
06381
06377
06395
Ctn
50
50
50
Plt
7,200
5,400
5,400
1 1/4
1 1/2
2
3
4
6
Part #
05868
05866
05867
05869
06396
06147
Ctn
50
100
100
30
10
10
Plt
4,500
7,200
4,800
1,260
720
240
STYLE NO. P102
PIPE INCREASER / REDUCER
HxH
Size
1 1/2 x 2
1 1/2 x 3
2x3
2x4
3x4
4x6
Part #
05948
05949
05950
05951
05952
05981
Ctn
25
25
20
10
20
5
Plt
3,600
1,800
1,440
720
840
270
SP x SJ
Size
1 1/4
1 1/2
1 1/2 x 1 1/4
Part #
06309
06393
06379
Ctn
50
50
75
Plt
7,200
5,400
5,400
STYLE NO. P103R
TRAP ADAPTER, MALE,
W / PLASTIC NUT &
1 1/2 x 1 1/4 WASHER
SP x SJ
Size
1 1/2 x 1 1/4
1 1/2
Part #
06389
06389
Ctn
50
50
Plt
5,400
5,400
STYLE NO. P103W
TRAP ADAPTER, MALE,
W / PLASTIC NUT AND WASHER
SP x SJ
Size
1 1/4
1 1/2
2
1 1/2 x 1 1/4
Part #
06308
06410
06390
06409
STYLE NO. P104W
TRAP ADAPTER, FEMALE,
W / PLASTIC NUT AND WASHER
Ctn
50
50
25
50
Plt
Part #
05937
05938
05939
05941
05942
06146
Ctn
Plt
100
50
50
25
30
10
14,400
7,200
7,200
3,600
2,160
720
Part #
Ctn
Plt
06056
50
7,200
STYLE NO. P106P
SLIP PLUG
SP
Size
06055
25
STYLE NO. P107
FLUSH BUSHING
H x SJ
Size
1 1/4
1 1/2
2
1 1/2 x 1 1/4
Part #
06380
06383
06382
06384
Ctn
50
50
25
50
Plt
7,200
5,400
3,600
5,400
STYLE NO. P104X
TRAP ADAPTER, FEMALE,
W / CHROME NUT & WASHER
H x SJ
Size
1 1/2
2
1 1/2 x 1 1/4
Part #
06376
06397
06394
Ctn
50
25
50
Plt
5,400
3,600
5,400
STYLE NO. P105
FITTING CLEANOUT ADAPTER
STYLE NO. P103P
TRAP ADAPTER, MALE,
W / 1 PIECE POLY NUT
1 1/4
1 1/2
2
3
4
6
1 1/2
3,600
2
FPT x H
Size
Size
1 1/4
1 1/2
2
3
4
6
Part #
05918
05922
05923
05924
05925
06148
Ctn
50
50
50
25
10
10
Plt
7,200
7,200
3,600
1,350
720
240
Part #
06007
06001
06002
06003
06004
06005
Ctn
50
50
50
25
10
10
Part #
05904
05905
05906
05907
05908
05910
05909
Ctn
100
50
50
30
30
30
30
Plt
14,400
7,200
7,200
3,240
3,240
1,440
1,620
STYLE NO. P107S
FLANGE BUSHING,
W / TUBE STOP
SP x H STYLE #1
Part #
06144
06149
Ctn
10
4
Plt
360
128
STYLE NO. P108
FLUSH BUSHING
SP x FPT STYLE #1
Size
Part #
Ctn
Plt
2 x 1 1/2
05913
50
7,200
STYLE NO. P109
MALE ADAPTER
SP x FPT
1 1/4
7,200
1 1/2
2
3
4
6
1 1/2 x 1 1/4
2 x 1 1/4
2 x 1 1/2
3 x 1 1/2
3x2
4x2
4x3
6x4
8x6
STYLE NO. P105X
FITTING CLEANOUT ADAPTER,
W / CLEANOUT PLUG
Size
Size
Size
SP x FPT
Size
SP x H STYLE #3
Plt
5,400
3,600
1,200
540
180
H x MPT
Size
Part #
1 1/4
1 1/2
2
3
4
05931
05927
05928
05929
05930
1 1/4 x 1 1/2
05926
REDUCING
Ctn
Plt
50
50
50
25
25
4,500
7,200
3,600
1,800
900
25
3,600
7,200
5,400
3,600
5,400
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 3 of 8
STYLE NO. P110
FLUSH CLEANOUT PLUG
STYLE NO. P118
ADAPTER BUSHING
MPT
Size
4
2
3
STYLE NO. P142
1 PIECE POLY NUT
DWV SP x SD H (Adapts DWV Hub to S/D Spigot)
Part #
06015
06017
06018
Ctn
25
25
50
Plt
3,600
7,200
7,200
Size
3
4
Part #
05990
05991
Ctn
25
10
Size
Plt
2,700
1,440
Size
NO H x H (Adapts CI NO HUB TO DWV PIPE)
Part #
1 1/4
1 1/2
2
3
06010
06386
06385
06366
1 1/2 x 1 1/4
06387
Ctn
Plt
50
50
25
25
7,200
5,400
3,600
1,350
100
7,200
REDUCING
STYLE NO. P113
TRAY PLUG ADAPTER
Size
1 1/2
2
3
4
4x3
Part #
05802
05954
05955
05956
05953
Ctn
25
25
20
15
10
Plt
3,600
3,600
1,440
810
480
STYLE NO. P120
SCH 40 TO SCH 30 ADAPTER
1 1/2
Size
06014
Ctn
50
Plt
3,600
STYLE NO. P113S
TRAY PLUG ADAPTER, SPIGOT
Part #
06419
Ctn
50
100
50
25
10
5
2
Plt
3,000
3,200
1,800
450
240
80
32
3
Part #
05996
Ctn
20
Ctn
50
Part #
06092
Ctn
10
Plt
1,440
Plt
1,440
STYLE NO. P122
SPIGOT ADAPTER, CAST IRON
STYLE NO. P300S
1/4 BEND, W / SIDE INLET
HxH
SP x NPSM
1 1/2
Part #
05875
05876
05877
05878
05879
06130
06131
STYLE NO. P300R
1/4 BEND
2 x 1 1/2
Size
ALL HUB (ADAPTS CI SPIGOT TO DWV PIPE)
Size
1 1/4
1 1/2
2
3
4
6
8
Size
H x NPSM THREAD
Part #
Plt
21,600
18,000
HxH
(ADAPTS 3” SCH 30. HUB TO 3” PVC SCH 40)
Size
Ctn
150
125
HxH
SP x MPT
Size
Part #
01036
01038
STYLE NO. P300
1/4 BEND
STYLE NO. P119
NO HUB ADAPTER
STYLE NO. P111
MALE FITTING ADAPTER
1 1/4
1 1/2
Plt
2,700
STYLE NO. P114
THREADED CAP
Size
2
4
Part #
05944
05946
Ctn
50
10
Plt
3,600
320
3 x 3 x 1 1/2
3x3x2
Part #
06069
06070
Ctn
10
10
Plt
360
360
STYLE NO. P302
1/4 BEND, STREET
STYLE NO. P123
HUB ADAPTER, CAST IRON
SP x H
Size
FPT
Size
1 1/2
2
Part #
05993
05994
Ctn
100
50
Plt
9,000
7,200
STYLE NO. P116
SOCKET CAP
1 1/2
2
3
4
6
8
Size
2
3
4
Part #
05957
05958
05959
Ctn
20
20
20
Plt
1,440
840
480
STYLE NO. P123R
HUB ADAPTER, CAST IRON,
INCREASER
H
Size
SP x H (ADAPTS CI HUB TO DWV PIPE)
Part #
Ctn
50
25
25
5
5
3
Plt
7,200
3,600
1,800
720
360
108
STYLE NO. P117
ADAPTER COUPLING
Size
2 x 1 1/2
3 x 1 1/2
3x2
4x3
Part #
05961
05964
06398
05960
Ctn
10
10
20
10
STYLE NO. P130
REPAIR COUPLING
Size
3
4
4x3
Part #
05970
05963
05962
Ctn
10
10
20
Plt
720
480
960
Size
1 1/2
2
3
4
6
Part #
05965
05966
05967
05968
05969
Ctn
20
25
10
5
5
Plt
4,800
3,600
1,080
540
175
4x3
Part #
05992
HxH
Size
3 x 3 x 1 1/2
3x3x2
4x4x2
Part #
06041
06042
06043
Ctn
25
25
15
Plt
450
450
180
HxH
Size
1 1/2
2
3
4
Part #
05871
05872
05873
05874
Ctn
50
25
10
5
Plt
1,800
1,200
360
180
STYLE NO. P305
LONG SWEEP 1/4 BEND
W / HIGH HEEL INLET
HxH
S/D SP x DWV H (Adapts 4” S/D HUB TO 3” DWV Spigot PIPE)
Size
Plt
3,000
3,600
1,800
560
240
80
STYLE NO. P304
LONG SWEEP 1/4 BEND
STYLE NO. P140
SLIP JOINT NUT
STYLE NO. P117X
ADAPTER COUPLING,
S/D X DWV HUB
Ctn
50
100
50
20
10
5
Plt
1,440
720
1,080
480
HxH
S/D H x DWV H (ADAPTS SEWER & DRAIN PIPE TO DWV
PIPE)
Part #
05894
05880
05881
05882
05883
05889
STYLE NO. P303
1/4 BEND, W / LOW HEEL INLET
SP x H (ADAPTS CI HUB TO DWV PIPE)
05977
05978
05979
05980
06057
06058
1 1/4
1 1/2
2
3
4
6
Ctn
10
Plt
720
Size
Size
1 1/4
1 1/2
2
Part #
05743
05744
05741
Ctn
400
100
100
Plt
21,600
14,400
10,800
3 x 3 x 1 1/2
3x3x2
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
Part #
06028
06027
Ctn
10
25
Plt
360
400
page 4 of 8
STYLE NO. P307
LONG SWEEP 1/4 BEND
W / LOW HEEL INLET
STYLE NO. P324
1/16 BEND
STYLE NO. P400
SANITARY TEE
HxH
Size
3 x 3 x 1 1/2
3x3x2
Part #
06025
06024
Ctn
Plt
10
25
360
300
STYLE NO. P309
LONG SWEEP 1/4 BEND, STREET
SP x H
Size
1 1/2
2
3
4
Part #
06060
06061
06063
06064
Ctn
50
25
20
10
Plt
2,400
1,200
360
160
H x H x SP
3x3x2
91.78
Part #
06026
Ctn
15
Plt
420
STYLE NO. P311
LONG SWEEP 1/4 BEND
W / SIDE INLET
3x3x2
Part #
06050
1 1/2
2
3
4
6
ALL HUB
Part #
05899
05900
05901
05983
05988
Ctn
50
25
20
15
3
Plt
3,600
2,700
720
420
108
STYLE NO. P326
1/16 BEND, STREET
25
Plt
400
STYLE NO. P319
1/6 BEND
Size
Part #
05984
05985
05986
05987
06011
Ctn
50
25
20
10
5
1 1/2
2
3
4
Part #
05895
05896
05897
05982
STYLE NO. P327
DOUBLE 1/4 BEND
Part #
1 1/2
2
3
4
06045
06046
06047
06048
2 x 1 1/2 x 1 1/2
06049
REDUCING
Ctn
Plt
20
25
10
5
1,440
900
280
100
25
1,200
40
25
20
10
Plt
2,880
1,800
320
320
STYLE NO. P320
1/6 BEND, STREET
HxH
Size
44 x 3
Part #
06093
Ctn
10
Size
Plt
360
STYLE NO. P330
CLOSET BEND, REDUCING
Size
1 1/2
2
3
4
Part #
06020
06021
06022
06023
Ctn
50
20
20
5
Plt
3,000
1,800
640
160
1 1/4
1 1/2
2
3
4
6
8
Part #
05884
05885
05886
05887
05888
06132
06134
Part #
06107
Ctn
10
4x3
Ctn
50
100
50
20
10
3
3
Plt
3,600
3,600
1,800
640
280
96
48
STYLE NO. P323
1/8 BEND, STREET
Part #
06108
Ctn
10
Plt
280
Plt
280
Ctn
20
25
25
50
20
10
5
10
10
5
Plt
1,440
1,350
1,200
1,200
640
480
360
280
180
60
STYLE NO. P403
SANITARY TEE, STREET
SP x H x H
Part #
06112
06113
06114
06120
Ctn
20
25
30
10
Plt
2,160
1,200
360
180
STYLE NO. P404
SANITARY TEE, STREET,
REDUCING
2 x 1 1/2 x 1 1/2
2 x 1 1/2 x 2
2 x 2 x 1 1/2
3 x 3 x 1 1/2
3x3x2
4x4x2
Part #
06115
06116
06117
06118
06119
06121
Ctn
25
25
50
10
20
5
Plt
1,350
1,350
1,600
540
560
270
ALL HUB
Size
3 x 3 x 3 x 1 1/2
3x3x3x2
4x4x4x2
Part #
05781
05782
05784
Ctn
10
10
5
Plt
280
280
120
STYLE NO. P417
SANITARY TEE
W / RIGHT SIDE INLET
ALL HUB
HxH
1 1/2
2
3
Part #
05757
05761
05760
05758
05764
05763
05767
05765
05766
05768
STYLE NO. P416
SANITARY TEE
W / LEFT SIDE INLET
STYLE NO. P331
VENT ELL
Size
1 1/2 x 1 1/2 x 1 1/4
2 x 1 1/2 x 1 1/2
2 x 1 1/2 x 2
2 x 2 x 1 1/2
3 x 3 x 1 1/2
3x3x2
4 x 4 x 1 1/2
4x4x2
4x4x3
6x6x4
Size
STYLE NO. P330X
CLOSET BEND, REDUCING,
W / TEST CAP
Size
HxH
Plt
2,000
1,800
1,120
360
140
60
30
SP x H x H
HxS
STYLE NO. P321
1/8 BEND
Size
4x3
Size
1 1/2
2
3
4
HxS
SP x H
Ctn
50
100
35
30
5
5
1
ALL HUB
Size
STYLE NO. P329
CLOSET BEND, REDUCING
Ctn
Part #
05751
05752
05753
05754
05755
05756
05775
Plt
5,400
2,700
960
360
90
HxH
Size
1 1/4
1 1/2
2
3
4
6
8
SP x H
Size
Ctn
Size
STYLE NO. P401
SANITARY TEE, REDUCING
HxH
HxH
Size
Size
1 1/2
2
3
4
6
STYLE NO. P310
1/4 BEND W / LOW HEEL INLET
Size
HxH
Part #
06084
06085
06086
Ctn
20
30
25
Plt
2,880
1,620
700
Size
3 x 3 x 3 x 1 1/2
3x3x3x2
4x4x4x2
Part #
05795
05796
05797
Ctn
10
10
5
Plt
280
280
100
STYLE NO. P333
VENT ELL, STREET
SP x H
Size
1 1/4
1 1/2
2
3
4
6
8
Part #
06016
05890
05891
05892
05893
06133
06136
Ctn
50
100
50
20
10
3
3
Plt
3,600
3,600
1,800
720
320
96
48
H x SP
Size
1 1/2
2
3
Part #
06088
06089
06090
Ctn
25
20
10
Plt
3,600
1,440
540
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 5 of 8
STYLE NO. P418
SANITARY TEE W / RIGHT
& LEFT SIDE INLET
STYLE NO. P445
FLUSH CLEANOUT TEE
STYLE NO. P503
COMBINATION WYE &
1/8 BEND – TWO PIECE
ALL HUB
ALL HUB
Size
List
Part #
3 x 3 x 3 x 1 1/2 x 1 1/2
3x3x3x2x2
4 x 4 x 4 x 1 1/2 x 1 1/2
4x4x4x2x2
Ctn
05810
05811
05805
05808
10
5
5
5
Plt
Size
240
210
120
100
1 1/2
2
3
4
STYLE NO. P428
DOUBLE SANITARY TEE
1 1/2
2
3
4
Ctn
25
20
20
4
Plt
1,350
720
240
112
Ctn
20
20
10
5
5
Plt
840
480
360
240
160
Part #
06310
Ctn
10
Part #
05772
Plt
360
3x3x3x3x2x2
Ctn
10
Plt
180
05770
Ctn
10
Plt
180
Part #
06403
06404
06405
06406
Ctn
25
25
10
5
Plt
1,800
1,350
480
180
1,440
360
180
Part #
05997
05998
05999
06000
24
Part #
Ctn
05235
Plt
5
400
Part #
05267
05271
Ctn
4
5
Plt
48
40
STYLE NO. P507
DOUBLE COMBINATION WYE
& 1/8 BEND, ASSEMBLED
ALL HUB
Size
3
4
2 x 1 1/2
3x2
4x2
4x3
Part #
06032
06033
06034
06035
06036
06037
Ctn
10
4
10
10
5
5
Plt
120
48
490
180
90
40
STYLE NO. P515
COMBO WYE & 1/8 BEND
W / LEFT SIDE INLET
ALL HUB
Part #
Ctn
05237
05238
Plt
10
5
240
120
Part #
06009
Ctn
10
Plt
180
STYLE NO. P516
COMBO WYE & 1/8 BEND
W / RIGHT SIDE INLET
ALL HUB
Size
3x3x3x2
Ctn
10
10
10
5
Part #
Ctn
25
5
Plt
500
Part #
06008
Ctn
10
Plt
180
20
20
5
720
135
Ctn
Plt
ALL HUB
Part #
05853
05858
05852
05860
50
20
10
10
1,200
560
240
120
STYLE NO. P502
COMBINATION WYE &
1/8 BEND,
REDUCING – ONE PIECE
Plt
1,440
1,080
480
180
2 x 1 1/2 x 1 1/2
2 x 1 1/2 x 2
2 x 2 x 1 1/2
3 x 3 x 1 1/2
3x3x2
4x4x2
4x4x3
Part #
05835
05836
05865
05837
05857
05863
05864
Ctn
5
5
20
15
10
5
5
STYLE NO. P600
WYE
ALL HUB
05247
STYLE NO. P501
COMBINATION WYE &
1/8 BEND – ONE PIECE
Size
H x H x FPT
1 1/2
2
3
4
10
10
5
Plt
ALL HUB
STYLE NO. P444X
CLEANOUT TEE WITH PLUG
Size
Ctn
05198
05199
05200
2
05246
3
05249
135
2 x 1 1/2 x 1 1/2 x 1 1/2
840
2 x 2 x 1 1/2 x 1 1/2 05244
3x2x3x3
05250
1 1/2
2
3
4
ALL HUB
1 1/2
2
3
4
Part #
STYLE NO. P500
DOUBLE FIXTURE FITTING
Size
STYLE NO. P441
VENT TEE
Size
6x6x4
6x6x3
Size
3
4
Plt
2
STYLE NO. P504
COMBINATION WYE & 1/8 BEND,
REDUCING – TWO PIECE
Size
STYLE NO. P448
TWO-WAY CLEANOUT
Size
ALL HUB
Part #
3 x 3 x 1 1/2 x 1 1/2
Ctn
ALL HUB
STYLE NO. P439
DOUBLE SANITARY TEE
W / RIGHT &
LEFT SIDE INLET
Size
Size
Size
ALL HUB
3x3x3x3x2
2
3
4
Part #
05266
ALL HUB
ALL HUB
STYLE NO. P438
DOUBLE SANITARY TEE
W / SIDE INLET
Size
Size
6
3x3x3x2
SP x H x H x H
3x3x2x2
Plt
2,160
1,440
540
240
ALL HUB
Part #
05817
05818
05820
05240
05821
STYLE NO. P431
DOUBLE SANITARY TEE,
STREET, REDUCING
Size
20
20
10
10
STYLE NO. P447
HORIZONTAL TWIN TEE
ALL HUB
2 x 2 x 1 1/2 x 1 1/2
3 x 3 x 1 1/2 x 1 1/2
3x3x2x2
4x4x2x2
4x4x3x3
Ctn
H x H x FPT
Part #
05812
05813
05814
05815
STYLE NO. P429
DOUBLE SANITARY TEE,
REDUCING
Size
Part #
06413
06414
06415
06416
STYLE NO. P445 X
FLUSH CLEANOUT TEE
W/ PLUG
ALL HUB
Size
Size
H x H x FPT
Plt
540
540
840
480
360
180
140
Size
1 1/4
1 1/2
2
3
4
6
8
Part #
05816
05822
05823
05824
05825
06135
06139
Ctn
35
50
25
25
5
4
1
Plt
1,680
1,400
800
300
140
48
12
STYLE NO. P601
WYE, REDUCING
ALL HUB
Size
2 x 1 1/2 x 1 1/2
2 x 1 1/2 x 2
2 x 2 x 1 1/2
3 x 3 x 1 1/2
3x3x2
4 x 4 x 1 1/2
4x4x2
4x4x3
6x6x3
6x6x4
8x8x6
Part #
05831
05832
05826
05827
05828
05833
05829
05830
06138
06137
05834
Ctn
25
50
25
15
25
5
10
10
5
5
1
Plt
1,050
900
1,050
420
400
210
240
160
60
60
16
STYLE NO. P602
WYE, STREET
SP x H x H
Size
1 1/2
2
3
4
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
Part #
06367
06368
06369
06370
Ctn
50
30
10
5
Plt
1,800
960
360
140
page 6 of 8
STYLE NO. P603
WYE, STREET, REDUCING
STYLE NO. P701
RETURN BEND W / CLEANOUT
SP x H x H
Size
3 x 3 x 1 1/2
3x3x2
4x4x2
4x4x3
STYLE NO. P800
CLOSET FLANGE
HxH
Part #
06372
06373
06374
06375
Ctn
20
30
10
10
Plt
480
480
240
180
STYLE NO. P611
DOUBLE WYE
H
Size
Part #
1 1/2
2
06471
06472
Ctn
20
10
Plt
1,440
720
Size
1 1/2
2
3
4
6
05838
05839
05840
05841
05842
Ctn
40
20
10
5
2
Plt
1,120
560
160
80
24
STYLE NO. P611S
DOUBLE WYE W / SIDE INLET
3x3x3x3x2
4x4x4x4x2
Part #
05849
06159
Ctn
10
5
Plt
160
60
STYLE NO. P612
DOUBLE WYE, REDUCING
4x3
2 x 2 x 1 1/2 x 1 1/2
3 x 3 x 1 1/2 x 1 1/2
3x3x2x2
4x4x2x2
4x4x3x3
6x6x4x4
Part #
Ctn
10
10
10
5
5
3
Plt
720
360
280
180
90
54
05214
05222
05230
05231
Part #
05223
05224
Ctn
5
5
Size
Part #
Part #
06156
06158
Ctn
5
5
Plt
175
90
10
10
Plt
1,080
540
Part #
Ctn
20
35
10
5
Plt
700
4x3
4x4
05225
Ctn
50
25
20
Plt
1,350
900
480
Ctn
20
Plt
720
SJ x H (FURNISHED W/BOTH SIZE SJ WASHERS)
Part #
05220
05220
HxH
Size
Ctn
25
25
Plt
900
900
Part #
06100
Plt
700
700
Size
4x3
Part #
05919
Ctn
25
Plt
800
STYLE NO. P810
CLOSET FLANGE,
ADJUSTABLE,
W / PLASTIC RING
H
(W / SLOTS)
Size
Part #
05256
Ctn
25
Plt
700
H (W / SLOTS)
Size
4x3
Ctn
10
Part #
05251
Ctn
25
Plt
700
STYLE NO. P811
CLOSET FLANGE, ADJUSTABLE,
W / METAL RING,
EPOXY COATED
(W / SLOTS)
4x3
4x4
Part #
05227
05226
Ctn
25
25
Plt
700
700
SP
Size
4x3
4x4
Part #
05228
05229
Ctn
25
25
Plt
700
700
STYLE NO. P812P
CLOSET FLANGE, SPIGOT,
ADJUSTABLE,
W / PLASTIC RING
(W/PLUG)
3 x 6 x 1 1/2
25
25
STYLE NO. P812
CLOSET FLANGE, SPIGOT,
ADJUSTABLE,
W / METAL RING,
EPOXY COATED
STYLE NO. P711P
LA P-TRAP W / UNION &
1 1/2 x 1 1/4 NUT &
POLY WASHER
Size
Ctn
SP (ONE PIECE PLASTIC)
Size
Part #
Part #
05254
05253
STYLE NO. P810S
CLOSET FLANGE, W / STOP,
ADJUSTABLE,
W / PLASTIC RING
Plt
1,440
840
280
120
Size
4x4
STYLE NO. P720X
DRUM TRAP, W / CLEANOUT
06466
06467
06468
06469
25
STYLE NO. P800KO
CLOSET FLANGE,
KNOCK OUT
H
1 1/4 x 1 1/2
1 1/2
HxH
1 1/2
2
3
4
Ctn
HxH
2
STYLE NO. P700
RETURN BEND
Size
05921
05215
05216
Size
ALL HUB
3x3x3x2
4x4x4x2
Plt
1,200
560
180
96
Plt
175
90
STYLE NO. P626
WYE W / RIGHT SIDE INLET
Size
25
20
10
4
HxH
ALL HUB
Part #
Ctn
STYLE NO. P708P
P-TRAP W / UNION
STYLE NO. P710
P-TRAP LOW PROFILE
06155
06157
Ctn
Plt
2,700
2,700
STYLE NO. P707X
P-TRAP W / SOLVENT
WELD JOINT & CLEAN OUT
1 1/4
1 1/2
2
3x3x3x2
4x4x4x2
25
25
Part #
05903
STYLE NO. P801
CLOSET FLANGE, SPIGOT,
REDUCING
Part #
1 1/2
2
3
4
STYLE NO. P625
WYE W / LEFT SIDE INLET
Size
Plt
700
HxH
1 1/2
2
05847
05843
05844
05845
05846
06142
Ctn
HxH
ALL HUB
25
H (ONE PIECE WITH SLOTS & KNOCK OUT TEST CAP)
Size
Size
Part #
05975
05975
Ctn
STYLE NO. P706X
P-TRAP W / SOLVENT WELD JOINT
Size
ALL HUB
Size
1 1/2 x 1 1/4
1 1/2
Part #
05902
(ONE PIECE WITH SLOTS)
Size
ALL HUB
Part #
4x4
STYLE NO. P800S
CLOSET FLANGE,
W / STOP
STYLE NO. P704P
TAIL PIECE ADAPTER
(Plastic Nut)
SP x SJ (FINISHED W/BOTH SIZES SJ WASHERS)
Size
(ONE PIECE WITH SLOTS)
Size
Plt
320
SP
Size
4x3
4x4
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
Part #
05252
05264
Ctn
25
25
Plt
700
700
page 7 of 8
STYLE NO. P815
FLUSH CLOSET FLANGE
H (FITS OVER 3” OR INSIDE 4” SCH 40 DWV PIPE)
Size
4x4/4x3
Part #
05255
Ctn
25
Plt
700
STYLE NO. P815KO
FLUSH CLOSET FLANGE,
KNOCK OUT
H (FITS OVER 3” OR INSIDE 4” SCH 40 DWV PIPE)
Size
4x4/4x3
Part #
05257
Ctn
25
Plt
700
STYLE NO. P820
OFFSET CLOSET FLANGE,
ADJUSTABLE,
W / METAL RING,
EPOXY COATED
H
Size
4x3
Part #
05920
Ctn
15
Plt
540
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 8 of 8