Accessories and Replacement Parts

Transcription

Accessories and Replacement Parts
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
Accessories and Replacement Parts
Replacement parts that are easily installed by non-factory personnel
Click here for List by Product Model
Click here for Complete List
Click here for Pictures
See Product Manuals at www.carsonsirens.com
See www.carsonsirens.com for additional information or contact our Service Department at:
E-mail [email protected] or Phone (888) 577-6877.
Carson is a trademark of Carson Manufacturing Company, Inc.
Revised 09/05/2008
Accessories and Replacement Parts
Complete List (Sorted by Description)
Click here for List by Product Model
Click on Part # for picture
Part #
Description
ED1865
CP3633
CP4899
CP4872
CP5003
CP5005
CP3941
BRKT,KIT,MIC HANGER & HOLDER W/ MTG
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-400 FLUSH MOUNTING
BRKT,SA-430/441 CH CONSOLE MTG
BRKT,SC-1022 HAND CTL HOLSTER
BRKT,SC-409 FLUSH MOUNTING
BRKT,SC-550-8X HND CTL HOLSTER
CP3676
CP3571
CP3965
CP5017
CP5018
CP4837
CP4686
BRKT,U DASH MTG FOR 5"W SIRENS
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP BLK
BUTTON,SWITCH CAP CHROME
BUTTON,SWITCH CAP RED
BUTTON,SWITCH CAP RED
BUTTON,SWITCH CAP WHT
CP3967
#8941
ED1753
CP3850
CP4181
CP4182
CP3040
CP3889
ED1757
BUTTON,SWITCH CAP BLK (SA-450)
BUTTON,SWITCH CAP RED (SA-450)
CABLE KIT,SIREN,HND CNT EX 15FT
CABLE,MIC EXTENSION 18FT (FX)
CABLE,SA-326 8-P PLUG,4 LEADS
CABLE,SA-326/525 8-LDS,NO CONT
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SA-430/441-8X AMP 3-P PG
CABLE,SA-430-1X 10-P PLUG,8FT
CP3877-1
ED1758
CABLE,SA-430-8X 8-P PLUG,7FT
CABLE,SA-441-1X 10-P PLUG,8FT
CP3877
CABLE,SA-441-8X 8-P PLUG,7FT
CP3886
ES00032-01
CABLE,SA-450 8-P PLUG,3FT
CABLE,SA-525-80 W/ CONT PANEL
CP4907
CP4908
CP3912
CP2560
CP3862
ED1756
CP4906
CABLE,SB-008 2-P PLUG,#22AWG
CABLE,SB-008-10 4-P PLG,#10AWG
CABLE,SC-550-8X 8-P PLUG,3FT
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
CABLE,STD 10-P PLG W/O MTG,8FT
CABLE, LEAD ASMB,#6AWG RED W/75A
TERM
CONN,10-P TERM BLK PLUG,5.08MM
CONN,10-P TERM BLK PLUG,W/L-SC
CONN,12-P TERM BLK PLUG,5.08MM
CONN,1-P HOUSING,75A PLUG
CONN,4-P TERM BLK PLUG,7.62MM
CONN,6-P TERM BLK PLUG,7.62MM
COVER,SA-326-10 AMPLIFIER
COVER,SA-350/351-01 AMPLIFIER
COVER,SA-400-1X/7X/8X/9X,W/STD
CP4688-10
CP4833-10
CP4688-12
CP4911
CP4956-04
CP4956-06
CP4152
CP4783
ES00026-03
www.carsonsirens.com
Notes
Page 2 of 33
Mounting screws not supplied.
Mounting screws not supplied.
Mounting screws not supplied.
Mounting screws not supplied.
Available until sold out.
Alternate option is ED1865 Mic Hanger Kit.
Available until sold out.
May also need CP5014 Dress Nut.
May also need CP5014 Dress Nut.
No longer available, substitute CP4837 or
CP5017.
Use with ES00028-10 Detachable Mic. or M-20X.
No Control Panel.
For Control Head.
For Remote Amplifier.
For Remote Amplifier.
Includes CP4833-10 Connector.
May also need CP3889 Cable.
For Remote Amplifier.
Includes CP4833-10 Connector.
For Remote Amplifier.
May also need CP3889 Cable.
No longer available, substitute SA-326-CH Control
Head but different mounting
Or use CP4182 Cable and supply own switches.
For Remote Amplifier.
Optional instead of CP2560 Cable.
Includes CP4688-10 Connector.
Use with CP4911 Connector Housing.
Use with CP4906 Lead Assembly.
No longer available.
No longer available.
Does NOT include Chassis.
Revised 09/05/2008
Accessories and Replacement Parts
Complete List by Description (Continued)
Click on Part # for picture
Part #
Description
Notes
ES00004-04
CP4812
CP3880
CP3876
COVER,SA-400-5X/6X,W/SPRING RETAINER
COVER,SA-430/441-1X AMPLIFIER
COVER,SA-430/441-1X/-8X CNT HD
COVER,SA-430/441-8X AMPLIFIER
CP4812-1
CP2831
COVER,SA-430-1X AMP,HOLE CVRED
COVER,SA-430-5X/6X AMPLIFIER
CP3045
COVER,SA-430-5X/6X/7X CONTROL HEAD
CP3606
COVER,SA-430-7X AMPLIFIER
CP3675-1
COVER,SA-450-8X/-9X (FINISHED)
CP4680-1
CP3788
COVER,SA-500-2X/-1X/-0X,W/STUD
COVER,SA-525-80 AMPLIFIER
CP4904
CP4936
CP4691-1
CP4952
CP4889
CP3901
COVER,SB-008-10 SWITCH BOX
COVER,SB-008-2X SWITCH BOX
COVER,SC-407-1X/LCS-7-01,W/STD
COVER,SC-409-1X SIREN
COVER,SC-550-1X AMPLIFIER
COVER,SC-550-8X AMPLIFIER
No longer available.
For Remote Amplifier, does NOT include Chassis.
Back Cover for SA-430/441 Control Head.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
For Remote Amplifier, does NOT include Chassis.
For Remote Amplifier, does NOT include Chassis.
No longer available.
Back Cover for older SA-430 Control Heads.
No longer available.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
Does NOT include Chassis.
Available until sold out.
Does NOT include Chassis.
Does NOT include Chassis.
Available until sold out.
No longer available.
Does NOT include Chassis.
Does NOT include Chassis.
Does NOT include Chassis.
For Remote Amplifier, does NOT include Chassis.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
VELCRO
AGC/3AG 10A
ATO/ATC 10A
ATO/ATC 15A
CP4990-150
SFE 20A
ATO/ATC 20A
ATO/ATC 25A
CP4990-250
ED1602
ED1608
ED1558
FASTENER,VELCRO .625 X 3" SET
FUSE,10A 32V
FUSE,10A AUTOMOTIVE (ATO)
FUSE,15A AUTOMOTIVE (ATO)
FUSE,15A AUTOMOTIVE MINI
FUSE,20A 32V
FUSE,20A AUTOMOTIVE (ATO)
FUSE,25A AUTOMOTIVE (ATO)
FUSE,25A AUTOMOTIVE MINI
KIT,SIREN,EXTRU HDWR,CONN,CLIP
KIT,SIREN,EXTRUD MTG HDWR ONLY
KIT,SIREN,MTG BOLTS,CONN,CLIP
658-214L
1555 KNOB
CP3963
CP4852
CP4227
CP4702
CP3964
CP4853
CP4228
CP4824
CP4960
CP4700
CP3916
CP4895
CM7382
7382 BL
#73 LAMP
KNOB,1/4"-D,BLACK
KNOB,1/4"-D,OVAL SURFACE W/PTR
KNOB,1/4"-D,WINGED FA,GOLD CAP
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/4"-D,WINGED PL,GOLD CAP
KNOB,1/4"-D,WINGED PL,SILV CAP
KNOB,1/8"-D,ROUND FA,GOLD CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
KNOB,1/8"-D,ROUND PL,GOLD CAP
KNOB,1/8"-D,ROUND PL,SILV CAP
KNOB,LEVER SWITCH BLACK
KNOB,LEVER SWITCH RED
LABEL,SC-550-8X PUSH BTN LEGND
LABEL,SIREN/LITE CONTRL LEGEND
LAMP,14V BI-PIN
LAMP,14V BI-PIN W/BENT LEGS
LAMP,14V MINI WEDGE BASE
www.carsonsirens.com
Page 3 of 33
No longer available.
Includes CP3966 Bolts, CP4688-10 Connector,
and CP3633 Mic Clip.
No longer available, substitute CP4852.
Available until sold out, substitute CP4227.
Available until sold out, substitute CP4852.
Available until sold out, substitute CP4852.
Available until sold out, substitute CP4228.
Available until sold out, substitute CP4853.
No longer available, substitute CP4853.
Available until sold out, substitute CP4960.
Available until sold out.
Replaceable Legend Labels.
Soldering on PCB Assembly may be required.
Soldering on PCB Assembly may be required.
Revised 09/05/2008
Accessories and Replacement Parts
Complete List by Description (Continued)
Click on Part # for picture
Part #
Description
Notes
JKL#7001PSBL
LAMP,24V BI-PIN R.A. W/SCKT
CM7327
E85 LAMP
ES00028-10
LAMP,28V BI-PIN
LAMP,28V MINI WEDGE BASE
MIC,NOISE CANC,DETACH (DM,FX)
2 ea are typically required.
Soldering on PCB Assembly may be required.
Soldering on PCB Assembly may be required.
M-20
M-20X
CP4750
CP3570
CP3952
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/PREAMP
MIC,NOISE CANC W/PREAMP DETACH
MIC,NOISE CANC W/CONNECTOR
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING GOLD
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
CP3966
SA-326-CH
SCREW,HEX HD,3/8"LOCKING BLK Z
SIREN,SA-326-BF CNTR HEAD ONLY
ED1656
SIREN,SA-351 REMOTE PANEL ONLY
SA-351-01AMP
SIREN,SA-351-01 REMOT AMP ONLY
ED1773
SIREN,SA-361 REMOTE PANEL ONLY
SA-361-10AMP
SA-430-10AMP
SIREN,SA-361-10 REMOT AMP ONLY
SIREN,SA-430-10 AMP ONLY W/CON
SA-430-17AMP
SIREN,SA-430-17 AMP ONLY W/CON
SA-430-10CH
SIREN,SA-430-10 CTL HD ONLY,F
SA-430-17CH
SIREN,SA-430-17 CTL HD ONLY,F
SA-430-10CHX
SIREN,SA-430-10 CTL HD ONLY,FX
SA-430-17CHX
SIREN,SA-430-17 CTL HD ONLY,FX
www.carsonsirens.com
Page 4 of 33
For SA-430/441FX Siren also may need CP3850
Mic Extension Cable.
Also for Detachable Microphone Model Sirens.
Soldering on PCB assembly required.
May also need CP3850 Mic. Extension Cable.
Soldering on PCB assembly required.
Available until sold out, substitute CP5014.
May also need CP3965 or CP5018 Button.
No longer available, substitute CP5014 and / or
CP3965 or CP5018 Button.
Mounting Bolt typically 2 ea are required.
Replacement Control Head.
Available until sold out.
Replacement Remote Panel.
No longer available, use ED1773 Remote Panel.
Replacement Remote Amplifier.
No longer available, use SA-361-10AMP.
Replacement Remote Panel.
May also need 6 ea CP4062-K2523 Q.C. Term.
Replacement Remote Amplifier.
Replacement Remote Amplifier
except for SA-430-17.
Includes CP4833-10 Connector.
Is NOT swappable with previous version SA-430
Amps but existing wiring may be used.
Replacement Remote Amplifier for SA-430-17.
Includes CP4833-10 Connector.
Replacement Control Head except for SA-430-17.
Is swappable with all previous version flush mount
SA-430 Control Heads and may be used with all
SA-430 Remote Amp versions except SA-430-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement Control Head for SA-430-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head
except for SA-430-17.
Is swappable with all previous version flush mount
extended mic SA-430 Control Heads and may be
used with all SA-430 Remote Amp versions
except for SA-430-17.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Replacement FX Control Head for SA-430-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Revised 09/05/2008
Accessories and Replacement Parts
Complete List by Description (Continued)
Click on Part # for picture
Part #
Description
Notes
SA-441-10AMP
SIREN,SA-441-10 AMP ONLY W/CON
SA-441-17AMP
SIREN,SA-441-17 AMP ONLY W/CON
SA-441-10CH
SIREN,SA-441-10 CTL HD ONLY,F
SA-441-17CH
SIREN,SA-441-17 CTL HD ONLY,F
SA-441-10CHX
SIREN,SA-441-10 CTL HD ONLY,FX
SA-441-17CHX
SIREN,SA-441-17 CTL HD ONLY,FX
SA-525-80AMP
SIREN,SA-525-80 AMP ONLY
SC-1012-10CH
SIREN,SC-1012 REMOT PANEL ONLY
SC-1022-10CH
SIREN,SC-1022 HAND CNTROL ONLY
SC-1000-10 14
SIREN,SC-10XX-10 REM AMP W/CON
SC-550-10AMP
SIREN,SC-550-10 14V AMP W/CON
SC-550-10AMP28
SIREN,SC-550-10 28V AMP W/CON
SC-550-10CH
SIREN,SC-550-10 14V HAND CONTR
SC-550-10CH28
SIREN,SC-550-10 28V HAND CONTR
Replacement Remote Amplifier
except for SA-441-17.
Includes CP4833-10 Connector.
Is NOT swappable with SA-441-83 Amp but
existing wiring may be used.
Replacement Remote Amplifier for SA-441-17.
Includes CP4833-10 Connector.
Replacement Control Head except SA-441-17.
Is swappable with SA-441-83 Control Head and
may be used with SA-441-83 Remote Amp.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement Control Head for SA-441-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head
except for SA-441-17.
Is swappable with SA-441-83 Control Head with
Extended Microphone and may be used with
SA-441-83 Remote Amp.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Replacement FX Control Head for SA-441-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement Remote Amplifier.
No longer available.
Replacement Remote Panel.
May also need:
15 ea CP4062-K2523 Q.C. Terminals,
1 ea CP4688-10 Connector.
Replacement Hand Control.
May also need ED1753 Hand Control Ext. Cable.
Replacement Remote Amplifier.
Includes CP4956-06 and CP4688-10 Connectors.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SC-550-83 Amp but
existing wiring may be used.
Replacement 28V Remote Amplifier.
Includes CP4833-10 Connector.
Replacement Hand Control
Is swappable with SC-550-83 Hand Controls with
RJ12 rectangular connector and may be used with
SC-550-83 Remote Amplifier that accepts the
RJ12 rectangular connector.
May also need CP4895 Legend Labels and/or
ED1753 Hand Control Ext. Cable.
Replacement 28V Hand Control
May also need CP4895 Legend Labels and/or
ED1753 Hand Control Ext. Cable.
CP4062-K2523
TERMINAL,3/16" INSUL FEM. Q.C.
www.carsonsirens.com
Page 5 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures
Click here for List by Product Model
Click here for top of Complete List
Brackets
ED1865
Bracket Kit, Microphone Hanger
and Holder with Mounting
CP3633
Microphone Clip with Mounting
Screws
CP4899
SA-400 Flush Mounting Bracket
CP5003
SC-1022 Hand Control Holster
Bracket
CP5005
SC-409 Flush Mounting Bracket
CP3941
SC-550-8X Hand Control Holster
Bracket
www.carsonsirens.com
Page 6 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Brackets (Continued)
CP4872
SA-430/441 Control Head Console Mounting Bracket
CP3676
U Dash Mounting Bracket for 5” Wide Sirens
CP3571
U Dash Mounting Bracket for 6” Wide Sirens
www.carsonsirens.com
Page 7 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Cables
ED1753
Kit, 15FT Hand Control Extension
Cable
CP3850
18FT Microphone Extension Cable
for SA-430/441 FX Control Head
CP4181
SA-326-10 8-P Plug, 4 Lead Cable
CP4182
SA-326-BF and SA-525-80
8-P Plug, 8 Lead Cable
CP3040
SA-430/441 Control Head 5-P Plug
Cable
CP3889
SA-430/441-8X Amplifier 3-P Plug
Cable
ED1757
SA-430-1X Amplifier 8FT 10-P Plug
Cable
CP3877-1
SA-430-8X Amplifier 7FT 8-P Plug
Cable
ED1758
SA-441-1X Amplifier 8FT 10-P Plug
Cable
www.carsonsirens.com
Page 8 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Cables (Continued)
CP3877
SA-441-8X Amplifier 7FT 8-P Plug
Cable
CP3886
SA-450 3FT 8-P Plug Cable
CP4907
SB-008 2-P Plug Cable, #22AWG
CP4908
SB-008-10 4-P Plug Cable,
#10AWG
CP3912
SC-550-8X Amplifier 3FT 8-P Plug
Cable
CP2560
Original Sirens 3FT 9-P Plug Cable
CP3862
Original Sirens 7FT 9-P Plug Cable
ED1756
Standard Siren 8FT 10-P Plug Cable
CP4906
SB-008-10 Cable Lead Assembly,
#6AWG with 75A Terminal
Picture Not Available
www.carsonsirens.com
Page 9 of 33
Need to add CP4911 Connector
Housing to complete Cable.
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Connectors
CP4688-XX
XX-P Terminal Block Plug Connector
0.2” Terminal Spacing
CP4833-10
10-P Terminal Block Plug with
Locking Screws Connector
0.2” Terminal Spacing
CP4688-10 Pictured
CP4956-XX
XX-P Terminal Block Plug Connector
0.3” Terminal Spacing
CP4956-06 Pictured
CP4911
Connector Housing for CP4906
Cable Lead Assembly
Knobs
1555 KNOB
Oval Surface with Pointer Knob for
1/4"-D shaft
www.carsonsirens.com
CP4700
Red Lever Switch Knob
Page 10 of 33
CP4960
Black Lever Switch Knob
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Knobs (Continued)
CP4852
Fancier Look Winged with Silver Cap
Knob for 1/4"-D shaft
CP4853
Fancier Look Round with Silver Cap
Knob for 1/8"-D shaft
CP3963
Fancier Look Winged with Gold Cap
Knob for 1/4"-D shaft
CP3964
Fancier Look Round with Gold Cap
Knob for 1/8"-D shaft
CP4702
Plain Look Winged with Silver Cap
Knob for 1/4"-D shaft
CP4227
Plain Look Winged with Gold Cap
Knob for 1/4"-D shaft
CP4228
Plain Look Round with Gold Cap
Knob for 1/8"-D shaft
CP4824
Plain Look Round with Silver Cap
Knob for 1/8"-D shaft
www.carsonsirens.com
Page 11 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Miscellaneous
CP3570
Noise Canceling Microphone with
Leads
CP4750
Noise Canceling Microphone with
Connector
ES00028-10
Noise Canceling Microphone with
Detachable Connector
SA-430-10AMP
SA-430-10 Model Replacement
Amplifier Only with Connector
SA-430-10CH
SA-430 Model Replacement Control
Head Only
SA-326-CH
SA-326-BF Model Replacement
Control Head Only
SA-441-10AMP
SA-441-10 Model Replacement
Amplifier Only with Connector
SA-441-10CH
SA-441 Model Replacement Control
Head Only
SA-441-10CHX
SA-441 FX Model Replacement
Control Head Only
www.carsonsirens.com
Page 12 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Miscellaneous (Continued)
SA-361-10AMP
SA-361-10 Model Replacement
Amplifier Only
ED1773
SA-361 Model Replacement Control
Panel Only
CP4062-K2523
3/16” Insulated Female Q.C.
Terminal
SC-550-10AMP
SC-550-10 14V Model Replacement
Amplifier Only with Connector
SC-550-10CH
SC-550 Model Replacement Hand
Control with Legend Labels
CP4895
Siren / Light Control Legend Labels
SC-1000-10 14
SC-10XX-10 Model Replacement
Remote Amplifier with Connectors
SC-1012-10CH
SC-1012 Model Replacement
Control Panel Only
SC-1022-10CH
SC-1022 Model Replacement Hand
Control Only
www.carsonsirens.com
Page 13 of 33
Revised 09/05/2008
Accessories and Replacement Parts
Pictures (Continued)
Click here for List by Product Model
Click here for top of Complete List
Miscellaneous (Continued)
ED1558
Kit, Mounting Bolts, 10-P Connector,
and Microphone Clip with Screws
www.carsonsirens.com
ED1608
Kit, Mounting Hardware for Extruded
(Slotted) Cover Sirens
Page 14 of 33
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model
Click here for Complete List
Click on Model # for related accessories and replacement parts
Model #
Description
Notes
LCS-7-01 14
SIREN, FULL FEATURED 200W 14V WITH
LIGHT CONTROL
SIREN, BASIC 100W 14V
SIREN, BASIC 100W 14V REMOTE
SIREN, BASIC 100W 14V
SIREN, BASIC 100W 14V REMOTE
SIREN, BASIC 100W 14V
SIREN, BASIC 100W 14V REMOTE
SIREN, BASIC 100W 14V WITH PA
SIREN, FULL FEATURED 200W
SIREN, FULL FEATURED 200W WITH
DETACHABLE MIC
SIREN, FULL FEATURED 200W
Produced from 1999 to 2001.
Swappable with SC-407-10 14.
Produced from 1997 to 2002.
Produced from 1997 to 2002.
Produced from 2000 to 2001.
Produced from 2000 to 2001.
Produced since 2004.
Produced since 2004.
Produced since 2005.
Produced since 2001.
Produced since 2001.
SA-326-10 14
SA-326-BF
SA-350-01 14
SA-351-01 14
SA-360-10 14
SA-361-10 14
SA-380-10 14
SA-400-1X
SA-400-1X DM
SA-400-9X
SA-400-9X DM
SA-400-7X/8X
SIREN, FULL FEATURED 200W WITH
DETACHABLE MIC
SIREN, FULL FEATURED 200W
SA-400-7X/8X DM
SIREN, FULL FEATURED 200W WITH
DETACHABLE MIC
SA-400-5X/6X
SIREN, FULL FEATURED 200W
SA-430-1XF
SA-430-1XFX
SIREN, FULL FEATURED 200W REMOTE
SIREN, FULL FEATURED 200W REMOTE
WITH EXTENDED DETACHABLE MIC
SIREN, FULL FEATURED 200W REMOTE
SA-430-83F
SA-430-83FX
SIREN, FULL FEATURED 200W REMOTE
WITH EXTENDED DETACHABLE MIC
SA-430-73F
SIREN, FULL FEATURED 200W REMOTE
SA-430-73FX
SIREN, FULL FEATURED 200W REMOTE
WITH EXTENDED DETACHABLE MIC
SA-430-53/63F
SIREN, FULL FEATURED 200W REMOTE
www.carsonsirens.com
Page 15 of 33
Produced from 1994 to 1999.
Swappable with SA-400-10.
Produced from 1994 to 1999.
Swappable with SA-400-10 DM.
Produced from 1988 to 1994.
Swappable with SA-400-9X.
On SA-400-7X there was a change to Siren
Pushbutton Switch in 1989.
Produced from 1988 to 1994.
Swappable with SA-400-9X DM.
On SA-400-7X DM there was a change to Siren
Pushbutton Switch in 1989.
Produced from 1980 to 1988.
Swappable with SA-400-7X.
Produced since 2002.
Produced since 2002.
Produced from 1999 to 2000.
Amplifier NOT same mounting and electrical
cables as SA-430-10F Amp.
Control head swappable with SA-430-10F Control
Head.
Produced from 1999 to 2000.
Amplifier NOT same mounting and electrical
cables as SA-430-10FX Amp.
Control head swappable with SA-430-10FX
Control Head.
Produced from 1988 to 1999.
Amplifier NOT same mounting and electrical
cables as SA-430-83F Amp.
Control head swappable with SA-430-83F Control
Head.
Produced from 1988 to 1999.
Amplifier NOT same mounting and electrical
cables as SA-430-83FX Amp.
Control head swappable with SA-430-83FX
Control Head.
Produced from 1983 to 1988.
Amplifier and Control head are swappable with
SA-430-73F Amp and Control Head.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Click on Model # for related accessories and replacement parts
Model #
Description
Notes
SA-430-53/63FX
SIREN, FULL FEATURED 200W REMOTE
WITH EXTENDED DETACHABLE MIC
SA-441-1XF
SIREN, FULL FEATURED 200W REMOTE
DUAL TONE
SIREN, FULL FEATURED 200W REMOTE
DUAL TONE WITH EXT DETACH MIC
SIREN, FULL FEATURED 200W REMOTE
DUAL TONE
Produced from 1988 to 1999.
Amplifier and Control head are swappable with
SA-430-73F Amp and Control Head.
Detachable Microphone is NOT same as
Detachable Mic on SA-430-73FX.
Produced since 2002.
SA-441-1XFX
SA-441-83F
SA-441-83FX
SIREN, FULL FEATURED 200W REMOTE
DUAL TONE WITH EXT DETACH MIC
SA-450-9X
SA-450-8X
SIREN, FULL FEATURED 100W
SIREN, FULL FEATURED 100W
SA-500-2X
SA-500-0X/1X
SIREN, FULL FEATURED 200W
SIREN, FULL FEATURED 200W
SA-520…
SA-525-80 14
SB-008-25 14
SIREN, BASIC 100W 14V REMOTE
SIREN, BASIC 100W 14V REMOTE
SWITCH BOX, 8 POSITION 160A 14V
PROGRAMMABLE
SWITCH BOX, 8 POSITION 160A 14V
SB-008-10 14
SC-407-10 14
SIREN, FULL FEATURED 200W 14V WITH
LIGHT CONTROL
SC-409-10 14
SIREN, FULL FEATURED 200W 14V WITH
LIGHT CONTROL PROGRAMMABLE
SIREN, FULL FEATURED 200W REMOTE
HAND-HELD WITH LIGHT CONTROL
SIREN, FULL FEATURED 200W REMOTE
HAND-HELD WITH LIGHT CONTROL
SC-550-10
SC-550-8X 14
SC-1002-10 14
SC-1012-10 14
www.carsonsirens.com
SIREN, BASIC 100W 14V WITH MECH
TONE AND LIGHT CONTROL
SIREN, BASIC 100W 14V REMOTE WITH
MECH TONE AND LIGHT CONTROL
Page 16 of 33
Produced since 2002.
Produced from 1993 to 2000.
Amplifier NOT same mounting and electrical
cables as SA-441-10F Amp.
Control head swappable with SA-441-10F Control
Head.
Produced from 1993 to 2000.
Amplifier NOT same mounting and electrical
cables as SA-441-10FX Amp.
Control head swappable with SA-441-10FX
Control Head.
Produced from 1994 to 1999.
Produced from 1989 to 1994.
Swappable with SA-450-9X.
There was a change to add Backlighting and PA
Volume Control to face in 1991.
Produced since 2003.
Produced from 1999 to 2003.
Swappable with SA-500-2X.
On SA-500-0X there was a change to Auxiliary
and Cutout Input Polarity in 2000.
Produced from 1985 to 1986.
Produced from 1989 to 1997.
Produced since 2006.
Produced from 2004 to 2006.
NOT same electrical cables as SB-008-25 14.
Produced since 2001.
In 2004 there was a change to Auxiliary and
Cutout Input Polarity... Unit labeled VERSION B.
Produced since 2005.
Produced since 2003.
Produced from 1994 to 2001.
In 1996 the Hand Control Cable changed from a
Circular DIN type connector to a Rectangular RJ
type connector.
The Hand Control with Rectangular connector is
swappable with SC-550-10 Hand Control.
Amplifier is NOT the same electrical cables as
SC-550-10 Amp but mounting is the same.
Produced since 2007.
Produced since 2007.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Click on Model # for related accessories and replacement parts
Model #
Description
Notes
SC-1022-10 14
SIREN, BASIC 100W 14V HAND-HELD
REMOTE WITH MECH TONE AND LIGHT
CONTROL
Produced since 2008.
www.carsonsirens.com
Page 17 of 33
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # LCS-7-01 14 and SC-407-10 14
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3571
CP5017
CP4837
CP4686
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP CHROME
BUTTON,SWITCH CAP RED
BUTTON,SWITCH CAP WHT
ED1756
CP4688-10
CP4691-1
ATO/ATC 20A
ED1558
CABLE,STD 10-P PLG W/O MTG,8FT
CONN,10-P TERM BLK PLUG,5.08MM
COVER,SC-407-1X/LCS-7-01,W/STD
FUSE,20A AUTOMOTIVE (ATO)
KIT,SIREN,MTG BOLTS,CONN,CLIP
CP4960
CP4700
CP3570
CP3966
KNOB,LEVER SWITCH BLACK
KNOB,LEVER SWITCH RED
MIC,NOISE CANC W/LEADS
SCREW,HEX HD,3/8"LOCKING BLK Z
Click here for top of Complete List
Notes
Use with 2 ea CP3966 Mounting Bolts.
Normal color.
No longer available, substitute CP4837 or
CP5017.
Includes CP4688-10 Connector.
Does NOT include Chassis.
Includes CP3966 Bolts, CP4688-10 Connector,
and CP3633 Mic Clip.
Available until sold out, substitute CP4960.
Soldering on PCB assembly required.
Mounting Bolt typically 2 ea are required.
Model # SA-326-10 14 and SA-326-BF
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3676
BRKT,U DASH MTG FOR 5"W SIRENS
CP4181
CP4182
CP4152
ATO/ATC 15A
SA-326-CH
CABLE,SA-326 8-P PLUG,4 LEADS
CABLE,SA-326/525 8-LDS,NO CONT
COVER,SA-326-10 AMPLIFIER
FUSE,15A AUTOMOTIVE (ATO)
SIREN,SA-326-BF CNTR HEAD ONLY
Also need 2 ea #10-32 1/4” long screws.
Available until sold out.
For SA-326-10 14.
For SA-326-BF, need to supply own switches.
No longer available.
Replacement Control Head for SA-326-BF
Available until sold out.
Model # SA-350-01 14 and SA-351-01 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP4783
ATO/ATC 15A
ED1656
COVER,SA-350/351-01 AMPLIFIER
FUSE,15A AUTOMOTIVE (ATO)
SIREN,SA-351 REMOTE PANEL ONLY
No longer available.
SA-351-01AMP
SIREN,SA-351-01 REMOT AMP ONLY
ED1773
SA-361-10AMP
SIREN,SA-361 REMOTE PANEL ONLY
SIREN,SA-361-10 REMOT AMP ONLY
CP4062-K2523
TERMINAL,3/16" INSUL FEM. Q.C.
www.carsonsirens.com
Page 18 of 33
Replacement Remote Panel For SA-351.
No longer available, use ED1773 Remote Panel.
Replacement Remote Amplifier for SA-351.
No longer available, use SA-361-10AMP.
Different mounting.
May also need 6 ea CP4062-K2523 Q.C. Term.
Replacement Remote Amplifier.
Different Mounting.
For Remote Panel, need 6 total
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-360-10 14 and SA-361-10 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3571
BRKT,U DASH MTG FOR 6"W SIRENS
For Remote Amplifier.
May also need ED1608 Mounting Hardware.
ATO/ATC 15A
ED1608
ED1773
FUSE,15A AUTOMOTIVE (ATO)
KIT,SIREN,EXTRUD MTG HDWR ONLY
SIREN,SA-361 REMOTE PANEL ONLY
SA-361-10AMP
CP4062-K2523
SIREN,SA-361-10 REMOT AMP ONLY
TERMINAL,3/16" INSUL FEM. Q.C.
For Remote Amplifier.
Replacement Remote Panel for SA-361.
May also need 6 ea CP4062-K2523 Q.C. Term.
Replacement Remote Amplifier.
For Remote Panel, need 6 total
Model # SA-380-10 14
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3571
CP5017
CP4837
ATO/ATC 15A
ED1608
CP4852
CP4750
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP CHROME
BUTTON,SWITCH CAP RED
FUSE,15A AUTOMOTIVE (ATO)
KIT,SIREN,EXTRUD MTG HDWR ONLY
KNOB,1/4"-D,WINGED FA,SILV CAP
MIC,NOISE CANC W/CONNECTOR
Click here for top of Complete List
Notes
May also need ED1608 Mounting Hardware.
Normal color.
Model # SA-400-1X and SA-400-1X DM
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4899
CP3571
CP3965
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-400 FLUSH MOUNTING
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP BLK
CP5018
CP2560
CP3862
ES00026-03
ATO/ATC 10A
ATO/ATC 20A
CP4852
CP4702
CP4853
CP4824
ES00028-10
CP4750
CP5014
8025 DRS/CAP
BUTTON,SWITCH CAP RED
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
COVER,SA-400-1X/7X/8X/9X,W/STD
FUSE,10A AUTOMOTIVE (ATO)
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/4"-D,WINGED PL,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
KNOB,1/8"-D,ROUND PL,SILV CAP
MIC,NOISE CANC,DETACH (DM,FX)
MIC,NOISE CANC W/CONNECTOR
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
CP3966
SCREW,HEX HD,3/8"LOCKING BLK Z
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 19 of 33
Mounting screws not supplied.
Use with 2 ea CP3966 Mounting Bolts.
For SA-400-17 and SA-400-17 DM.
May also need CP5014 Dress Nut.
May also need CP5014 Dress Nut.
Optional instead of CP2560 Cable.
Does NOT include Chassis.
For 28V unit.
For 14V unit.
Available until sold out, substitute CP4852.
No longer available, substitute CP4853.
For SA-400-1X DM.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Mounting Bolt typically 2 ea are required.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-400-9X and SA-400-9X DM
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4899
CP3571
CP3965
CP2560
CP3862
ES00026-03
ATO/ATC 10A
ATO/ATC 20A
CP3963
CP4852
CP4227
CP3964
CP4853
CP4228
#73 LAMP
E85 LAMP
ES00028-10
CP3570
CP3952
CP3966
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-400 FLUSH MOUNTING
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP BLK
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
COVER,SA-400-1X/7X/8X/9X,W/STD
FUSE,10A AUTOMOTIVE (ATO)
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,GOLD CAP
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/4"-D,WINGED PL,GOLD CAP
KNOB,1/8"-D,ROUND FA,GOLD CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
KNOB,1/8"-D,ROUND PL,GOLD CAP
LAMP,14V MINI WEDGE BASE
LAMP,28V MINI WEDGE BASE
MIC,NOISE CANC,DETACH (DM,FX)
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING GOLD
SCREW,HEX HD,3/8"LOCKING BLK Z
Click here for top of Complete List
Notes
Mounting screws not supplied.
Use with 2 ea CP3966 Mounting Bolts.
May also need CP5014 Dress Nut.
Optional instead of CP2560 Cable.
Does NOT include Chassis.
For 28V unit.
For 14V unit.
Available until sold out, substitute CP4227.
Available until sold out, substitute CP4852.
Available until sold out, substitute CP4228.
Available until sold out, substitute CP4853.
For 14V unit.
For 28V Unit.
For SA-400-9X DM.
Soldering on PCB assembly required.
Available until sold out, substitute CP5014.
Mounting Bolt typically 2 ea are required.
Model # SA-400-7X/8X and SA-400-7X/8X DM
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4899
CP3571
CP5018
CP2560
CP3862
ES00026-03
ATO/ATC 10A
ATO/ATC 20A
CP4852
CP4853
#73 LAMP
E85 LAMP
ES00028-10
CP3570
CP5014
8025 DRS/CAP
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-400 FLUSH MOUNTING
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP RED
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
COVER,SA-400-1X/7X/8X/9X,W/STD
FUSE,10A AUTOMOTIVE (ATO)
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,14V MINI WEDGE BASE
LAMP,28V MINI WEDGE BASE
MIC,NOISE CANC,DETACH (DM,FX)
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
CP3966
SCREW,HEX HD,3/8"LOCKING BLK Z
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 20 of 33
Mounting screws not supplied.
Use with 2 ea CP3966 Mounting Bolts.
May also need CP5014 Dress Nut.
Optional instead of CP2560 Cable.
Does NOT include Chassis.
For 28V unit.
For 14V unit.
For 14V unit.
For 28V Unit.
For SA-400-7X/8X DM.
Soldering on PCB assembly required.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Mounting Bolt typically 2 ea are required.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-400-5X/6X
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3571
CP2560
CP3862
ES00004-04
AGC/3AG 10A
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 6"W SIRENS
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
COVER,SA-400-5X/6X,W/SPRING RETAINER
FUSE,10A 32V
SFE 20A
658-214L
CP4852
CM7382
CM7327
M-20
CP3966
FUSE,20A 32V
KNOB,1/4"-D,BLACK
KNOB,1/4"-D,WINGED FA,SILV CAP
LAMP,14V BI-PIN
LAMP,28V BI-PIN
MIC,NOISE CANC W/PREAMP
SCREW,HEX HD,3/8"LOCKING BLK Z
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 21 of 33
Use with 2 ea CP3966 Mounting Bolts.
Optional instead of CP2560 Cable.
No longer available.
For 28V unit.
No longer available.
For 14V unit.
No longer available, substitute CP4852.
For 14V unit.
For 28V unit.
Soldering on PCB assembly required.
Mounting Bolt typically 2 ea are required.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-430-1XF and SA-430-1XFX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP3965
BUTTON,SWITCH CAP BLK
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
ED1757
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SA-430-1X 10-P PLUG,8FT
CP4833-10
CP3880
CP4812-1
ATO/ATC 20A
CP4852
CP4853
ES00028-10
CONN,10-P TERM BLK PLUG,W/L-SC
COVER,SA-430/441-1X/-8X CNT HD
COVER,SA-430-1X AMP,HOLE CVRED
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
MIC,NOISE CANC,DETACH (DM,FX)
CP4750
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/CONNECTOR
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-430-10AMP
SIREN,SA-430-10 AMP ONLY W/CON
SA-430-17AMP
SIREN,SA-430-17 AMP ONLY W/CON
SA-430-10CH
SIREN,SA-430-10 CTL HD ONLY,F
SA-430-17CH
SIREN,SA-430-17 CTL HD ONLY,F
SA-430-10CHX
SIREN,SA-430-10 CTL HD ONLY,FX
SA-430-17CHX
SIREN,SA-430-17 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 22 of 33
For Control Head.
Mounting screws not supplied.
For SA-430-17.
May also need CP5014 Dress Nut.
May also need CP5014 Dress Nut.
For SA-430-1XFX Control Head.
Use with ES00028-10 Detachable Mic.
For Control Head.
For Remote Amplifier.
Includes CP4833-10 Connector.
For Remote Amplifier.
Back Cover for Control Head.
For Remote Amplifier, does NOT include Chassis.
For SA-430-1XFX Control Head.
Use with CP3850 Mic. Extension Cable.
For SA-430-1XF Control Head.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier for SA-430-10.
Includes CP4833-10 Connector.
Replacement Remote Amplifier for SA-430-17.
Includes CP4833-10 Connector.
Replacement Control Head for SA-430-10.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement Control Head for SA-430-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head for SA-430-10.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Replacement FX Control Head for SA-430-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-430-83F and SA-430-83FX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
CP3889
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SA-430/441-8X AMP 3-P PG
CP3877-1
CABLE,SA-430-8X 8-P PLUG,7FT
CP3880
CP3876
COVER,SA-430/441-1X/-8X CNT HD
COVER,SA-430/441-8X AMPLIFIER
ATO/ATC 20A
CP4852
CP4853
JKL#7001PSBL
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,24V BI-PIN R.A. W/SCKT
ES00028-10
MIC,NOISE CANC,DETACH (DM,FX)
CP3570
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-430-10AMP
SIREN,SA-430-10 AMP ONLY W/CON
SA-430-10CH
SIREN,SA-430-10 CTL HD ONLY,F
SA-430-10CHX
SIREN,SA-430-10 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 23 of 33
For Control Head.
Mounting screws not supplied.
May also need CP5014 Dress Nut.
For SA-430-83FX Control Head.
Use with ES00028-10 Detachable Mic.
For Control Head.
For Remote Amplifier.
May also need CP3877-1 Cable
For Remote Amplifier.
May also need CP3889 Cable.
Back Cover for Control Head.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
2 ea are typically required.
Soldering on PCB Assembly may be required.
For SA-430-83FX Control Head.
Use with CP3850 Mic. Extension Cable.
Soldering on PCB assembly required.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SA-430-83 Amp but
existing wiring may be used by cutting off plugs.
Mounting holes different.
Replacement Control Head.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-430-73F and SA-430-73FX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
CP2560
CP3862
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
CP3880
CP3045
COVER,SA-430/441-1X/-8X CNT HD
COVER,SA-430-5X/6X/7X CONTROL HEAD
CP3606
COVER,SA-430-7X AMPLIFIER
ATO/ATC 20A
CP4852
CP4853
JKL#7001PSBL
FUSE,20A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,24V BI-PIN R.A. W/SCKT
ES00028-10
MIC,NOISE CANC,DETACH (DM,FX)
CP3570
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-430-10AMP
SIREN,SA-430-10 AMP ONLY W/CON
SA-430-10CH
SA-430-10CHX
SIREN,SA-430-10 CTL HD ONLY,F
SIREN,SA-430-10 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 24 of 33
For Control Head.
Mounting screws not supplied.
May also need CP5014 Dress Nut.
For SA-430-73FX Control Head.
Use with ES00028-10 Detachable Mic.
For Control Head.
For Remote Amplifier.
Optional for Remote Amplifier
instead of CP2560 Cable.
Back Cover for Control Head.
Back Cover for older Control Head.
No longer available.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
2 ea are typically required.
Soldering on PCB Assembly may be required.
For SA-430-73FX Control Head.
Use with CP3850 Mic. Extension Cable.
Soldering on PCB assembly required.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SA-430-73 Amp but
existing wiring may be used by cutting off plug.
Mounting holes different.
May also need CP3040 Cable or CP3633 Mic Clip.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-430-53/63F and SA-430-53/63FX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
CP2560
CP3862
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
CP2831
CP3045
SFE 20A
CP4852
CP4853
JKL#7001PSBL
COVER,SA-430-5X/6X AMPLIFIER
COVER,SA-430-5X/6X/7X CONTROL HEAD
FUSE,20A 32V
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,24V BI-PIN R.A. W/SCKT
M-20
MIC,NOISE CANC W/PREAMP
M-20X
MIC,NOISE CANC W/PREAMP DETACH
CP5014
8025 DRS/CAP
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-430-10AMP
SIREN,SA-430-10 AMP ONLY W/CON
SA-430-10CH
SIREN,SA-430-10 CTL HD ONLY,F
SA-430-10CHX
SIREN,SA-430-10 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 25 of 33
For Control Head.
Mounting screws not supplied.
May also need CP5014 Dress Nut.
For SA-430-53/63FX Control Head.
Use with M-20X Detachable Mic.
For Control Head.
For Remote Amplifier.
Optional for Remote Amplifier
instead of CP2560 Cable.
No longer available.
No longer available.
2 ea are typically required.
Soldering on PCB Assembly may be required.
For SA-430-53/63F Control Head.
Soldering on PCB assembly required.
For SA-430-53/63FX Control Head.
Use with CP3850 Mic. Extension Cable.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SA-430-53/63 Amp but
existing wiring may be used by cutting off plug.
Mounting holes different.
Replacement Control Head.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-441-1XF and SA-441-1XFX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP3965
BUTTON,SWITCH CAP BLK
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
ED1758
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SA-441-1X 10-P PLUG,8FT
CP4833-10
CP4812
CP3880
ATO/ATC 15A
CP4852
CP4853
ES00028-10
CONN,10-P TERM BLK PLUG,W/L-SC
COVER,SA-430/441-1X AMPLIFIER
COVER,SA-430/441-1X/-8X CNT HD
FUSE,15A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
MIC,NOISE CANC,DETACH (DM,FX)
CP4750
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/CONNECTOR
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-441-10AMP
SIREN,SA-441-10 AMP ONLY W/CON
SA-441-17AMP
SIREN,SA-441-17 AMP ONLY W/CON
SA-441-10CH
SIREN,SA-441-10 CTL HD ONLY,F
SA-441-17CH
SIREN,SA-441-17 CTL HD ONLY,F
SA-441-10CHX
SIREN,SA-441-10 CTL HD ONLY,FX
SA-441-17CHX
SIREN,SA-441-17 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 26 of 33
For Control Head.
Mounting screws not supplied.
For SA-441-17.
May also need CP5014 Dress Nut.
May also need CP5014 Dress Nut.
For SA-441-1XFX Control Head.
Use with ES00028-10 Detachable Mic.
For Control Head.
For Remote Amplifier.
Includes CP4833-10 Connector.
For Remote Amplifier.
For Remote Amplifier, does NOT include Chassis.
Back Cover for Control Head.
2 ea may be required.
For SA-441-1XFX Control Head.
Use with CP3850 Mic. Extension Cable.
For SA-441-1XF Control Head.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier for SA-441-10.
Includes CP4833-10 Connector.
Replacement Remote Amplifier for SA-441-17.
Includes CP4833-10 Connector.
Replacement Control Head for SA-441-10.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement Control Head for SA-441-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head for SA-441-10.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Replacement FX Control Head for SA-441-17.
May also need CP3040 Cable or CP3633 Mic Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-441-83F and SA-441-83FX
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP4872
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SA-430/441 CH CONSOLE MTG
CP5018
CP3850
BUTTON,SWITCH CAP RED
CABLE,MIC EXTENSION 18FT (FX)
CP3040
CP3889
CABLE,SA-430/441 CH 5-P PLUG
CABLE,SA-430/441-8X AMP 3-P PG
CP3877
CABLE,SA-441-8X 8-P PLUG,7FT
CP3880
CP3876
COVER,SA-430/441-1X/-8X CNT HD
COVER,SA-430/441-8X AMPLIFIER
ATO/ATC 15A
CP4852
CP4853
JKL#7001PSBL
FUSE,15A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,24V BI-PIN R.A. W/SCKT
ES00028-10
MIC,NOISE CANC,DETACH (DM,FX)
CP3570
CP5014
8025 DRS/CAP
MIC,NOISE CANC W/LEADS
NUT,1/4-40 DRESS BUSHING NICKEL
NUT,1/4-40 DRESS W/CAP RED
SA-441-10AMP
SIREN,SA-441-10 AMP ONLY W/CON
SA-441-10CH
SIREN,SA-441-10 CTL HD ONLY,F
SA-441-10CHX
SIREN,SA-441-10 CTL HD ONLY,FX
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 27 of 33
For Control Head.
Mounting screws not supplied.
May also need CP5014 Dress Nut.
For SA-441-83FX Control Head.
Use with ES00028-10 Detachable Mic.
For Control Head.
For Remote Amplifier.
May also need CP3877 Cable.
For Remote Amplifier.
May also need CP3889 Cable.
Back Cover for Control Head.
For Remote Amplifier, does NOT include Chassis.
Available until sold out.
2 ea may be required.
2 ea are typically required.
Soldering on PCB Assembly may be required.
For SA-441-83FX Control Head.
Use with CP3850 Mic. Extension Cable.
Soldering on PCB assembly required.
May also need CP5018 Button.
No longer available, substitute CP5014 and / or
CP5018 Button.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SA-441-83 Amp but
existing wiring may be used by cutting off plugs.
Mounting holes different.
Replacement Control Head.
May also need CP3040 Cable or CP3633 Mic Clip.
Replacement FX Control Head.
May also need:
CP3040 Cable,
CP3850 Mic Extension Cable,
ES00028-10 Detachable Microphone,
CP3633 Microphone Clip.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-450-9X
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3676
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 5"W SIRENS
CP3967
#8941
CP3886
CP3675-1
BUTTON,SWITCH CAP BLK (SA-450)
BUTTON,SWITCH CAP RED (SA-450)
CABLE,SA-450 8-P PLUG,3FT
COVER,SA-450-8X/-9X (FINISHED)
ATO/ATC 15A
CP3963
CP4852
CP4227
CP3964
CP4853
CP4228
#73 LAMP
CP3570
CP3966
FUSE,15A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,GOLD CAP
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/4"-D,WINGED PL,GOLD CAP
KNOB,1/8"-D,ROUND FA,GOLD CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
KNOB,1/8"-D,ROUND PL,GOLD CAP
LAMP,14V MINI WEDGE BASE
MIC,NOISE CANC W/LEADS
SCREW,HEX HD,3/8"LOCKING BLK Z
Click here for top of Complete List
Notes
Use with 2 ea CP3966 Mounting Bolts.
Available until sold out.
Does NOT include Chassis.
Available until sold out.
Available until sold out, substitute CP4227.
Available until sold out, substitute CP4852.
Available until sold out, substitute CP4228.
Available until sold out, substitute CP4853.
Soldering on PCB assembly required.
Mounting Bolt typically 2 ea are required.
Model # SA-450-8X
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3676
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 5"W SIRENS
#8941
CP3886
CP3675-1
BUTTON,SWITCH CAP RED (SA-450)
CABLE,SA-450 8-P PLUG,3FT
COVER,SA-450-8X/-9X (FINISHED)
ATO/ATC 15A
CP4852
CP4853
CM7382
#73 LAMP
CP3570
CP3966
FUSE,15A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/8"-D,ROUND FA,SILV CAP
LAMP,14V BI-PIN
LAMP,14V MINI WEDGE BASE
MIC,NOISE CANC W/LEADS
SCREW,HEX HD,3/8"LOCKING BLK Z
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 28 of 33
Use with 2 ea CP3966 Mounting Bolts.
Available until sold out.
Does NOT include Chassis.
Available until sold out.
Soldering on PCB Assembly is required.
Soldering on PCB assembly required.
Mounting Bolt typically 2 ea are required.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SA-500-0X/1X and SA-500-2X
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP3571
CP5017
CP4837
CP4686
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP CHROME
BUTTON,SWITCH CAP RED
BUTTON,SWITCH CAP WHT
ED1756
CP4688-10
CP4680-1
ATO/ATC 10A
ATO/ATC 20A
ED1558
CABLE,STD 10-P PLG W/O MTG,8FT
CONN,10-P TERM BLK PLUG,5.08MM
COVER,SA-500-2X/-1X/-0X,W/STUD
FUSE,10A AUTOMOTIVE (ATO)
FUSE,20A AUTOMOTIVE (ATO)
KIT,SIREN,MTG BOLTS,CONN,CLIP
CP4852
CP4702
CP4750
CP3570
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,1/4"-D,WINGED PL,SILV CAP
MIC,NOISE CANC W/CONNECTOR
MIC,NOISE CANC W/LEADS
CP3966
SCREW,HEX HD,3/8"LOCKING BLK Z
Click here for top of Complete List
Notes
Use with 2 ea CP3966 Mounting Bolts.
For SA-500-27.
No longer available, substitute CP4837 or
CP5017.
Includes CP4688-10 Connector.
Does NOT include Chassis.
For 28V unit.
For 14V unit.
Includes CP3966 Bolts, CP4688-10 Connector,
and CP3633 Mic Clip.
Available until sold out, substitute CP4852.
For SA-500-1X/2X.
For SA-500-0X.
Soldering on PCB assembly required.
Mounting Bolt typically 2 ea are required.
Model # SA-520…
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP2560
CP3862
CABLE,SIREN,ORIGINAL 9-P,3FT
CABLE,SIREN,ORIGINAL 9-P,7FT
AGC/3AG 10A
FUSE,10A 32V
SFE 20A
FUSE,20A 32V
Must supply own controls.
Optional instead of CP2560 Cable.
Must supply own controls.
For 28V unit.
No longer available.
For 14V unit.
Model # SA-525-80 14
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP4182
ES00032-01
CABLE,SA-326/525 8-LDS,NO CONT
CABLE,SA-525-80 W/ CONT PANEL
ATO/ATC 15A
CP3788
FUSE,15A AUTOMOTIVE (ATO)
COVER,SA-525-80 AMPLIFIER
SA-525-80AMP
SIREN,SA-525-80 AMP ONLY
www.carsonsirens.com
Click here for top of Complete List
Notes
No longer available, substitute SA-326-CH Control
Head but different mounting
Or use CP4182 Cable and supply own controls.
Does NOT include Chassis.
Available until sold out.
No longer available.
Page 29 of 33
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SB-008-25 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3571
CP4907
CP4956-04
CP4936
ATO/ATC 25A
CP4895
CP3966
BRKT,U DASH MTG FOR 6"W SIRENS
CABLE,SB-008 2-P PLUG,#22AWG
CONN,4-P TERM BLK PLUG,7.62MM
COVER,SB-008-2X SWITCH BOX
FUSE,25A AUTOMOTIVE (ATO)
LABEL,SIREN/LITE CONTRL LEGEND
SCREW,HEX HD,3/8"LOCKING BLK Z
Use with 2 ea CP3966 Mounting Bolts.
2 ea are typically required.
Does NOT include Chassis.
Mounting Bolt typically 2 ea are required.
Model # SB-008-10 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3571
CP4907
CP4908
CP4906
BRKT,U DASH MTG FOR 6"W SIRENS
CABLE,SB-008 2-P PLUG,#22AWG
CABLE,SB-008-10 4-P PLG,#10AWG
CABLE, LEAD ASMB,#6AWG RED W/75A
TERM
CONN,1-P HOUSING,75A PLUG
COVER,SB-008-10 SWITCH BOX
FUSE,25A AUTOMOTIVE (ATO)
LABEL,SIREN/LITE CONTRL LEGEND
SCREW,HEX HD,3/8"LOCKING BLK Z
Use with 2 ea CP3966 Mounting Bolts.
CP4911
CP4904
ATO/ATC 25A
CP4895
CP3966
2 ea are typically required.
Use with CP4911 Connector Housing.
Use with CP4906 Lead Assembly.
No longer available.
Mounting Bolt typically 2 ea are required.
Model # SC-409-10 14
Click on Part # for picture
Click here for top of List by Product Model
Part #
Description
CP3633
CP5005
CP3571
CP4688-12
CP4956-06
CP4952
ATO/ATC 20A
ATO/ATC 25A
CP4852
CP4960
CP4895
CP4750
CP3966
BRKT,MIC CLIP W/ MTG SCREWS
BRKT,SC-409 FLUSH MOUNTING
BRKT,U DASH MTG FOR 6"W SIRENS
CONN,12-P TERM BLK PLUG,5.08MM
CONN,6-P TERM BLK PLUG,7.62MM
COVER,SC-409-1X SIREN
FUSE,20A AUTOMOTIVE (ATO)
FUSE,25A AUTOMOTIVE (ATO)
KNOB,1/4"-D,WINGED FA,SILV CAP
KNOB,LEVER SWITCH BLACK
LABEL,SIREN/LITE CONTRL LEGEND
MIC,NOISE CANC W/CONNECTOR
SCREW,HEX HD,3/8"LOCKING BLK Z
www.carsonsirens.com
Click here for top of Complete List
Notes
Page 30 of 33
Mounting screws not supplied.
Use with 2 ea CP3966 Mounting Bolts.
Does NOT include Chassis.
1 ea for Siren Amp.
9 ea for Light Controls.
Mounting Bolt typically 2 ea are required.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SC-550-10
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
ED1865
ED1753
CP4833-10
CP4889
VELCRO
ATO/ATC 10A
ATO/ATC 20A
ATO/ATC 25A
1555 KNOB
CP4895
SC-550-10AMP
BRKT,KIT,MIC HANGER & HOLDER W/ MTG
CABLE KIT,SIREN,HND CNT EX 15FT
CONN,10-P TERM BLK PLUG,W/L-SC
COVER,SC-550-1X AMPLIFIER
FASTENER,VELCRO .625 X 3" SET
FUSE,10A AUTOMOTIVE (ATO)
FUSE,20A AUTOMOTIVE (ATO)
FUSE,25A AUTOMOTIVE (ATO)
KNOB,1/4"-D,OVAL SURFACE W/PTR
LABEL,SIREN/LITE CONTRL LEGEND
SIREN,SC-550-10 14V AMP W/CON
For Hand Control.
For Hand Control
For Remote Amplifier.
For Remote Amplifier, does not include Chassis.
For Hand Control.
1 ea for 28V unit Siren Amp.
1 ea for 14V unit Siren Amp.
7 ea for Light Controls
SC-550-10AMP28
SIREN,SC-550-10 28V AMP W/CON
SC-550-10CH
SIREN,SC-550-10 14V HAND CONTR
SC-550-10CH28
SIREN,SC-550-10 28V HAND CONTR
www.carsonsirens.com
Page 31 of 33
For Hand Control.
Replacement Remote Amplifier for SC-550-10 14.
Includes CP4833-10 Connector.
Replacement 28V Remote Amplifier.
Includes CP4833-10 Connector.
Replacement Hand Control for SC-550-10 14.
May also need ED1753 Hand Control Ext. Cable
or CP4895 Legend Labels.
Replacement Hand Control for SC-550-10 28.
May also need ED1753 Hand Control Ext. Cable
or CP4895 Legend Labels.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SC-550-8X 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
ED1865
CP3941
BRKT,KIT,MIC HANGER & HOLDER W/ MTG
BRKT,SC-550-8X HND CTL HOLSTER
ED1753
CABLE KIT,SIREN,HND CNT EX 15FT
CP3912
CP3901
CABLE,SC-550-8X 8-P PLUG,3FT
COVER,SC-550-8X AMPLIFIER
VELCRO
ATO/ATC 20A
ATO/ATC 25A
1555 KNOB
CP3916
7382 BL
FASTENER,VELCRO .625 X 3" SET
FUSE,20A AUTOMOTIVE (ATO)
FUSE,25A AUTOMOTIVE (ATO)
KNOB,1/4"-D,OVAL SURFACE W/PTR
LABEL,SC-550-8X PUSH BTN LEGND
LAMP,14V BI-PIN W/BENT LEGS
For Hand Control.
For SC-550-8X Hand Control.
Available until sold out.
Alternate option is ED1865 Mic Hanger Kit.
For Hand Controls with RJ12 Rectangular
Connector on Cable.
For Remote Amplifier.
For Remote Amplifier, Does NOT include Chassis.
Has rectangular hole for RJ12 Hand Control Plug.
No covers with round hole for Circular Plug.
Available until sold out.
For Hand Control.
1 ea for Siren Amp.
7 ea for Light Controls.
SC-550-10AMP
SIREN,SC-550-10 14V AMP W/CON
SC-550-10CH
SIREN,SC-550-10 14V HAND CONTR
www.carsonsirens.com
Page 32 of 33
Available until sold out.
2 ea are typically required.
Soldering on PCB Assembly is required.
Replacement Remote Amplifier.
Includes CP4833-10 Connector.
Is NOT swappable with SC-550-83 Amp but
existing wiring may be used by cutting off plugs.
Mounting holes the same.
SC-550 Hand Control must have the RJ12
rectangular connector.
Replacement Hand Control.
Is swappable with SC-550-83 Hand Controls with
RJ12 rectangular connector and may be used with
SC-550-83 Amp that accepts the RJ12
rectangular connector.
May also need ED1753 Hand Control Ext. Cable.
Revised 09/05/2008
Accessories and Replacement Parts
List by Product Model (Continued)
Model # SC-1002-10 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3571
CP5017
CP4837
CP4956-06
CP4990-150
CP4990-250
ED1608
BRKT,U DASH MTG FOR 6"W SIRENS
BUTTON,SWITCH CAP CHROME
BUTTON,SWITCH CAP RED
CONN,6-P TERM BLK PLUG,7.62MM
FUSE,15A AUTOMOTIVE MINI
FUSE,25A AUTOMOTIVE MINI
KIT,SIREN,EXTRUD MTG HDWR ONLY
May also need ED1608 Mounting Hardware.
Normal color.
1 ea for Siren Amp.
1 ea for Light Controls.
Model # SC-1012-10 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
CP3571
BRKT,U DASH MTG FOR 6"W SIRENS
CP4688-10
CP4956-06
CP4990-150
CP4990-250
ED1608
SC-1012-10CH
CONN,10-P TERM BLK PLUG,5.08MM
CONN,6-P TERM BLK PLUG,7.62MM
FUSE,15A AUTOMOTIVE MINI
FUSE,25A AUTOMOTIVE MINI
KIT,SIREN,EXTRUD MTG HDWR ONLY
SIREN,SC-1012 REMOT PANEL ONLY
SC-1000-10 14
SIREN,SC-10XX-10 REM AMP W/CON
CP4062-K2523
TERMINAL,3/16" INSUL FEM. Q.C.
For Remote Amplifier.
May also need ED1608 Mounting Hardware.
For SC-1012 Control Panel.
For Remote Amplifier.
1 ea for Siren Amp.
1 ea for Light Controls.
For Remote Amplifier.
Replacement Remote Panel.
May also need:
15 ea CP4062-K2523 Q.C. Terminals,
1 ea CP4688-10 Connector.
Replacement Remote Amplifier.
Includes CP4956-06 and CP4688-10 Connectors.
15 ea are typically required for SC-1012 Control
Panel.
Model # SC-1022-10 14
Click on Part # for picture
Click here for top of List by Product Model
Click here for top of Complete List
Part #
Description
Notes
ED1865
CP5003
BRKT,KIT,MIC HANGER & HOLDER W/ MTG
BRKT,SC-1022 HAND CTL HOLSTER
CP3571
BRKT,U DASH MTG FOR 6"W SIRENS
ED1753
CP4956-06
VELCRO
CP4990-150
CP4990-250
ED1608
SC-1022-10CH
CABLE KIT,SIREN,HND CNT EX 15FT
CONN,6-P TERM BLK PLUG,7.62MM
FASTENER,VELCRO .625 X 3" SET
FUSE,15A AUTOMOTIVE MINI
FUSE,25A AUTOMOTIVE MINI
KIT,SIREN,EXTRUD MTG HDWR ONLY
SIREN,SC-1022 HAND CNTROL ONLY
SC-1000-10 14
SIREN,SC-10XX-10 REM AMP W/CON
For Hand Control.
For Hand Control.
Mounting screws not supplied.
For Remote Amplifier.
May also need ED1608 Mounting Hardware.
For Hand Control.
For Remote Amplifier.
For Hand Control.
1 ea for Siren Amp.
1 ea for Light Controls.
For Remote Amplifier.
Replacement Hand Control.
May also need ED1753 Hand Control Ext. Cable.
Replacement Remote Amplifier.
Includes CP4956-06 and CP4688-10 Connectors.
www.carsonsirens.com
Page 33 of 33
Revised 09/05/2008

Similar documents

Clutch Kits - Race Consulting

Clutch Kits - Race Consulting The AP Racing Formula Clutch Kit Range is the best and most complete kit available. The range has been specifically designed to meet the demands of modified high performance vehicles, utilising the...

More information