PM1600 Wireless Pulse Meter
Transcription
PM1600 Wireless Pulse Meter
PM1600 Wireless Pulse Meter Pulse metering made simple for utility billing, monitoring and control applications. The PM1600 is an simple and cost-effective solution that does not require drive by data collection. Secure, Reliable, Wireless Bi-directional Communication Opening the spectrum of applications to the real-time, two-way mass meter systems, as well as those hard to reach locations or demanding applications, the eLutions PM1600 provides a direct interface from pulse meters to standard applications used in the utility and energy industries. With pulse logging and iDEN® Network support built-in, the PM1600 is a natural choice for meter connectivity without the necessity for drive-by reader systems or hardwired installations. Internet-enabled Wireless Solutions for Sensor and Control Applications COMMERCIAL APPLICATIONS: • AMR • Building Controls • Demand Response • Energy Management • Industrial Automation • Generator Monitoring & Controls The PM1600 can be used in conjuction with the industry standard AEM® (Active Energy Management) software which is the gold standard for commerical and industrial users of Energy Information Systems. AEM® enables real-time monitoring and control, forecasting and billing of energy systems which encompass any form of metering, generation, HVAC or user specified equipment. The PM1600 can also be used directly with eLutions PRLM (Price Responsive Load Module) software for structured curtailment applications. This allows Independent System Operators, Curtailment Service Providers, Utilities and end-users to schedule, control, contract and settle transactions in the near real-time energy markets. The PM1600 works with the eLutions GenView software for tracking, monitoring, control and dispatch of generators or generator groups. Easy to Integrate Through the use of standard interfaces at the communications or database layers, the PM1600 can easily integrate with client or third-party software applications. See the PM1600 Today! Enhance the investment in your business with the PM1600 Pulse Meter device, compatible application and the iDEN® Network. Demonstrations are available by contacting an eLutions Sales Representative at [email protected]. SAMPLE ENERGY & UTILITY APPLICATION SCREENS www.elutions.com/data • 813-371-5500 • [email protected] PM1600 Wireless Pulse Meter FEATURES AND BENEFITS SYSTEM OVERVIEW: • Reliable, stand-alone module designed for easy installation and dependable operation • Real-time wireless meters data collection and control • Revenue grade data for electric, gas, water and steam meters • Pulse device support for pulse initiating voltage, flow and temperature meters • Support for three pulse meters by utilizing on-board digital inputs • Internet/Intranet support using an embedded TCP/IP stack • Provides real-time alarm and control when used with any eLutions vertical application • Over-the-Air (OTA) capabilities for remote firmware/feature upgrades • Closed loop control support utilizing on-board digital output • Internal battery charging control circuit for remote operation • Rugged enclosure COMMUNICATIONS: • Transmits data through the Packet Switched iDEN® Data Network to AEM® , PRLM, GenView or client application using TCP/IP and ENDPTT Protocols • Support for alternate intelligent devices using the on-board RS485/RS232 communication port INPUTS/OUTPUTS: • 3 Digital Inputs (channels) for pulse counting - Supports local data storage for 56 days of 5 minute interval history - Collects data in 5, 15, 30, and 60 minute intervals, fixed or sliding window • 2 Analog Inputs monitoring 4-20mA or 0-10V sensors • 2 Digital Outputs/control relay outputs SAMPLE ENERGY & UTILITY APPLICATION SCREENS TECHNICAL SPECIFICATIONS RADIO Motorola i30sx equivalent 600mW output POWER REQUIREMENTS Voltage: 8 to 18 VDC (12 VDC nominal) Input current: 0.125 amps steady state – 1.5 amps transient peak FCC COMPLIANCE Part 15 and part 90 Laptop HyperTerminal interface CASE ANTENNA REQUIREMENTS 50 Ohm Impedance WEIGHT ENVIRONMENT PARAMETERS SHOCK & VIBRATION Per MIL-STD-810E Approximately 5.04”W x 2.25”H x 7”D FIELD DIAGNOSTICS Aluminum extrusion chassis and plate metal faceplates, base unit with flange at either side for direct mounting, dust and water resistant, splash proof cover 625 grams DIMENSIONS Operating Temperature -25C to +60C Storage Temperature -40C to +85C Operating Humidity 0 to 95% RH noncondensing at +50C Data Sheet for accompanying hardware at www.elutions.com/data © 2004 eLutions, Inc.