superjet 96+ freestyle

Transcription

superjet 96+ freestyle
SUPERJET 96+ FREESTYLE
FUEL
SYSTEMS
ENGINE/
GASKETS
-1" Turn Plate
Part No.
YAAMAL191
CARBON CHIN PAD
Lightweight construction with unbreakable carbon
construction. Fits 96+ Superjet and UMI 800SXR
handlepole conversion system. Chin pad cover
black top/green side only.
Description
Hood Latch Clear
Hood Latch Green
Hood Latch Red
Part No.
YAAMAL501CL
YAAMAL501GN
YAAMAL501RD
Description
Lustic Footwell
HOOD STRAP KIT
Secure your stand-ups hood to avoid accidental
dislodging during freestyle maneuvers. All
stainless mounting hardware and instruction
included. Black.
Part No.
AWC0125SXR
Description
SJ96+ HAND HOLD
KIT STD MOUNT
SXR Mid Mount drop-in hand holds
for stock hoods.
SXR forward Mount drop-in hand
holds for stock hoods.
Super Jet 96+ Mid mount dropin hand holds for stock hoods.
Part No.
KASRC0188
Part No.
YA96C0182
AWAC125BLK
HAND HOLD KIT
"Q" HOLD MOUNT
Universal mount drop-in hand
holds are easily located on any
flat surface.
Part No.
FOUR
STROKE
SXR HAND HOLD KIT
STANDARD MOUNT
KASRC0187
Part No.
Hood Strap Kit
SXR HAND HOLD KIT
MID MOUNT
Part No.
BODY
AWC0126
YA96C0122BLKGRN
YA96C0122BLKBLK
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
Part No.
Mac Footwell
Part No.
Black/Green
Black/Black
LUSTIC SXR
FOOTWELLS MAC MASHERS
No cutting of the wide SXR tray required. Design
KICKER FOOTWELLS
in conjunction with pro Kawasaki rider Chris
Designed especially for all SUperjet and used
MacClugage and Darren Hedlund. Experience
exclusively by Josh Lustic on his Factory Pro
the feel of a standard footwell cut out without having
kawasaki SXR800.
to notch out your SXR tray. 100% race legal.
Description
Description
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
Yamaha Superjet 96+
BILLET HOOD LATCH
Recently updated and re-machined to also fit the
Kawasaki SXR800, SXI Pro all Yamaha Superjet
and FX1.
EXHAUST
-1" SUPERJET TURN PLATE
Moves the normal rider position forward
approximately 1 inch. Helps to reduce hull
porposing and dramatically improves handling.
For Superjet 96+, FX1 & Polaris Octane with
UMI bearing system.
*Use with UMI Part#JS-04103
AWC0187
179
FUEL
SYSTEMS
A.
FOUR
STROKE
FREESTYLE CHEMICAL SERVICE TOOLS ACCESSORIES
& 800SXR
/HARDWARE
BODY
STEERING WATERLINE ELECTRICAL DRIVE LINE
& CONTROLS /BILGE
HANDLING
EXHAUST
ENGINE/
GASKETS
B.
KENNEY LIP RIPPER RIDE PLATE
TUBBIE SPONSONS
Designed with feedback exclusively from Joe, Taylor Curtis and Clay Cullen
this is quite simply the coolest ride plate for surf shredding available.
Unique reverse "D" cutout generates wave carving turns to die for. Not an
understatement!
This Race Model Tubbie Two (Part # AWC0213) grips better in tuning and is
more stable in straight line high speed riding. The Rec/Freeride model
(Part#AWCO212) are very stable, but have some nose wandering at mid
throttle due to the curved chine riding back and forth on the bow wave. This
is a very beneficial in freeriding as the ski is able to be more forgiving and
reacts better to a variety of directions and water flow angles.
Description
Description
Part No.
Superjet 96+
YASJC0699
AWC0212
AWC0213
C.
D.
ENGINE KEEPERS
JOE KENNEY DESIGN
ENGINE FLUSH KITS
Tired of expensive and excessive motor mount failure? This keeper
retains the engine in place, while still allowing normal-use movement of
factory or aftermarket engine mount. Keeps drive couplers from separating
and shearing.
Description
Part No.
Engine Keepers Super Jet 96+
YASJAC146
A must for salt water riders! All metal construction- easy to use- just push
into aftermarket water bypass. No tools, clamps, extra hoses necessary.
Back flushes entire cooling system instead of forcing salt and sand into
cooling jackets. Use in conjunction with our salt terminator kit. Simple
and effective.
Description
C. Standard Flush Tool
D. Kawasaki 800 SXR Flush Tool – Triple
* Salt Terminator: See page 177
Part No.
AWAC172
AWAC170
E.
F.
DUAL EXHAUST KIT
Unload that exhaust during tail stands! Kit includes all necessary hoses,
clamps, exhaust splitter, aluminum outlet and detailed installation
instructions. Our kits are ultra sano and feature a show quality polished
outlet and pre bent hoses. Absolutely necessary for the stand up purist.
Description
Yamaha Superjet 96+
180
Part No.
A. Tubbie 1 – Rec-Surf-Freeride-Freestyle
B. Tubbie 2 – Race Model Only
Part No.
YASJAC145
YAMAHA EXHAUST SPLITTER & SIDE
EXHAUST OUTLET
Description
E. Yamaha SJ96+ Exhaust Splitter Only
F. Yamaha SJ96+ Side Exhaust Outlet
Part No.
AWACC149
AWACC150
Part No. Description
YAAMAL350CL
YAAMAL350BL
YAAMAL350RD
YAAMAL350BK
YAMAHA SJ DRIVE
COUPLER COVER
Replace your broken plastic factory cover with
our unbreakable stainless steal cover. CNC
Laser-cut.
Description
SJ Drive Coupler Cover
Part No.
YAAMAL332
Clear
Red
Black
Blue
Part No.
04-03-100
04-03-103
04-03-101
04-03-102
Description
Fuel Pick Up 800SXR
Fuel Pick Up SJ96+
Part No.
KASXAL143
YAAMAL140
AWC0163
DUAL BILGE PUMP
MOUNTING BRACKET
Description
A. SXR800
B. Superjet 96+
Part No.
KASXAL441
YA96AL441
ONE WAY VALVE
Description
Part No.
KASRCO161
AWCO161
AWCO163
UNDER HOOD FUEL FILLER
AP DESIGNS HOOD STRAPS
Your stock gas cap is used on filler. Both single
carb and dual carb models available. Utilizes your
stock Yamaha gas cap to make fill ups a breeze
without gas spills!
SCUPPER VALVE ASSEMBLY
24-7 drain valve has an aluminum flap, that does
not bend or warp, greatly improving the seal.
Description
Description
Freestyle Hood Straps
Part No. Linder Hood Fuel Filler Single
77-0001 Linder Hood Fuel Filler Dual
Part No.
SF-001
DF-001
Description
Scupper Valve Assembly
Part No.
FOUR
STROKE
For Freestyle riding of Super Jet
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
800SXR
SJ, Kaw750, Octane
Pro Finish Kit
BODY
Unlike scupper valves that mount on the
exposed exterior of your ski, our one way valve
kits install “into” the rear 1/4 of your PWC end
caps. This keeps continual water pressure on
the inside of the tube, keeping the valve shut
when the ski is floating.
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
Clear
Blue
Red
Black
EXHAUST
Description
Not legal for stock class racing. IJSBA Race
legal in Limited and Super Stock as long as you
retain the stock external fuel filler. Kits include
fuel tank block off and all necessary hardware.
ENGINE/
GASKETS
BLOWSION LOW PRO
BILLET GAS CAPS
BILLET EXHAUST NOZZLE
FOR YAMAHA SJ96+
FUEL
SYSTEMS
BILLET DUAL FUEL PICK UP
SV-001
181
FUEL
SYSTEMS
EXHAUST
ENGINE/
GASKETS
HANDLE POLE BRACKET
This bracket provides the lowest possible pivot point, movies the hinge
point of the pole one inch forward (for better leverage and comfort),
corrosion resistant stainless construction.
Description
Description
Part No.
Carbon Fiber Chin Pad
Carbon Fiber Chin Pad with X-Groove Pad
BODY
STEERING WATERLINE ELECTRICAL DRIVE LINE
& CONTROLS /BILGE
HANDLING
CARBON FIBER CHIN PAD
This system solves all inherent problems with stock pole pads. Carbon, Glass and
Aluminum design adds strength and rigidity. Pole brace is incorporated into the
system (Pad will not interfere with steering system). Hydro-Turfing will not water
log. System includes all mounting hardware. Fits 1996 & newer Yamaha Superjets.
CP-001
CP-001-DIA
FREESTYLE CHEMICAL SERVICE TOOLS ACCESSORIES
& 800SXR
/HARDWARE
FOUR
STROKE
SR71B-001
SUPERJET HOOD LATCH
SUPERJET HOOD HOOKS
182
Part No.
Handle Pole Bracket
24-7 hood hooks are superior in design with a slotted front hole and fixed
rear hole. The large docking part makes hood installation quick and easy.
The curved hood pin area slides the hood to the perfect location.
Designed for function and style. 24-7 has created a hood latch using
tight tolerances for a snug fit to keep your hood secure even under the
most extreme situations.
Description
Part No.
Description
Superjet Hood Hooks
BHH-001
Superjet Hood Latch
Part No.
HL-001
UNIVERSAL BINDING SYSTEM
24-7 binding system has been redesigned for 2002, giving you the best, most
comfortable hold on the market. Fits all models.
24-7 new Universal Binding System (UBS) is completely new for 2003,
the UBS gives you the same function and comfort as our original binding
system. This system is designed to be fitted in any stand up hull
(Octane, SXR-800, Pre 96 Super jet, Kawasaki 750’s, 650’s, 300-550’s,
and Yamaha Fx-1). Fits all models.
Description
Part No.
Description
Part No.
2002 Binding System
BS-001
Universal Binding System
UBS-002
2002 BINDING SYSTEM
KAWASAKI 800 SXR NEW PRODUCTS
FUEL
SYSTEMS
R&D
BLOWSION RACING FUEL
PICKUP FOR KAWASAKI
SX/SXI/SXI-PRO/SXR
Part No.
KASXAL144
*Hardware not included.
R&D REED SPACER
Kawasaki
NEW V-FORCE DELTA 2
Kawasaki
Delta 2
All Twins
V2W150-2
Repl Pedal
2P127-1
Kawasaki
Angled Reed Spacer
Part No.
JSU 800-RSK
Kawasaki
Part No.
800SXR Stock Carb
200-00800
(I Series Adapters Included)
800SXR Aftermarket Carb 200-00120
120mm center to center
(Adapter not included)
Part No.
KASXAL143
R&D REED VALVE
STUFFERS
TBM ANGLED
REED SPACER
R&D Reed Value Stuffers significantly increase
low-speed air velocity. This dramatically improves
low/mid range throttle response and also top end
performance. Exclusive internal wing design
increases overall velocity through reed assembly.
TBM angled reed spacers position the reed
cages in the optimal position for fuel atomization.
Key features include a full 3 degrees of angle,
an integrated pulse fitting, which allows you
to add a second pulse line without drilling
your crankcases. Compatible with stock, or
aftermarket cages these spacers come complete
with all necessary hardware and gaskets.
Kawasaki
Part No.
750/800SXR OEM Manifold 271-75001
750/800SXR R&D Manifold 271-75000
Kawasaki
Part No.
K750/800SXR
Angled Reed Spacer
TBM106
ALUMINUM AIR
FILTER ADAPTER
Mikuni
Part No.
OEM 40mm “I” Series
53-4465
(48mm Bore)
Sea Doo HX/XP, K750 SXI 96-02,
K800SXR 03-06
FOUR
STROKE
R&D PRO-LOCK
POWER PLENUM
Description
Billet Dual Pick Up
BODY
Angled to direct intake airflow up into the transfer
ports on cylinder. This reed spacer kit is the
easiest way to bolt on a 3 HP gain. Kit comes
complete with all the hardware and gasket
needed for installation.
251-75010
251-80000
7050
62-3050
BLOWSION FUEL FILLER FOR
KAWASAKI SX/SXI/SXI-PRO/SXR
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
JSU ANGLED
REED SPACER
750/800 Spacer
750/800 Spacer Angled
Reed Gasket
6x50mm Stainless
Steel Studs (Sold Each)
Part No.
EXHAUST
Description
Billet Dual Pick Up
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
Kawasaki
Part No.
800SXR
231-75146
With Billet Carb. Plate
for OEM Reed
800SXR
231-75148
With Billet Carb. Plate
for MOTO TASSANARI reed
Mounting Plate Gasket
12-0010
Center to center 120mm
Kawasaki
Part No.
750/800
231-75144
800SXR for MOTO
231-75144-MT
TASSANARI reed
Center to center 104mm
ENGINE/
GASKETS
R&D
183
FOUR
STROKE
FREESTYLE CHEMICAL SERVICE TOOLS ACCESSORIES
& 800SXR
/HARDWARE
BODY
STEERING WATERLINE ELECTRICAL DRIVE LINE
& CONTROLS /BILGE
HANDLING
EXHAUST
ENGINE/
GASKETS
FUEL
SYSTEMS
Head without
Girdle
TBM107
KA800G
R&D CAST HEAD
Kawasaki
Part No.
750/800 24cc
750/800 25cc
750/800 26cc
750/800 27cc
750 O-Ring Set of 2
800 SXR 28cc
800 SXR 29cc
800 O-Ring Set of 2
750/800 Girdle Hardware Kit
*Girdle kit is optional
TBM RACING KAWASAKI
800 SXR BILLET HEAD
Description
Part No.
SX-R Head Kit with Girdle
TBM107-G
SX-R Head Kit without Girdle
TBM107
Repl O-Rings for Head Kit
TBM107-O
Dome 19cc SS 225 psi+
TBM019
Dome 22cc SS 220 psi+
TBM022
Dome 24cc Lmtd SS 215 psi+
TBM024
Dome 26cc Lmtd SS 210 psi+
TBM026
Dome 27cc Lmtd SS 195 psi+
TBM027
* Domes Sold Individually
TBM LIMITED SPEC DOME
Description
Part No.
Lmtd Spec Dome 22cc (+.050”)
Lmtd Spec Dome 24cc (+.050”)
Lmtd Spec Dome 26cc (+.050”)
Lmtd Spec Dome 27cc (+.050”)
.060” (1.5mm) Base Gasket
* Domes Sold Individually
800SXR WISECO PISTON
TBM022-L
TBM024-L
TBM026-L
TBM027-L
7040F
Piston Kit
Bore Over CC Ring
Size Size
Set
mm
mm
Kawasaki Factory Race Part
810M08250 82.50 2.50 791 3228KB
810M08296 82.96 2.96 800 8300KB
OEM Replacement
837M08200 82.00 STD 782 3228KD
837M08250 82.50 0.50 791 3248KD
837M08296 82.96 2.96 800 3268KD
800SXR PRO-X PISTON
STD .010
.020
.030 .040
Std. Bore STD .25mm .50mm .75mm 1mm
82.00
4510 4511 4512 4513 4514
ADA KAWASAKI 800SXR
BILLET GIRDLE HEAD
This head uses the stock head bolts and is completely sealed by O-rings, no head gasket required.
Dual water outlets for additional cooling. This head
will work with Factory Pipe’s 800 dry pipe.
Kawasaki
Part No.
A800SXR/750
KA800M
Girdle Head Shell**
ADA 800SXR Girdle Kit
KA800G
ADA 800SXR
KA8022
Dome 22cc (225 lbs.-114 Octane)
ADA 800SXR
KA8024
Dome 24cc (216 lbs.-110 Octane)
ADA 800SXR
KA8026
Dome 26cc (208 lbs.-105 Octane)
ADA 800SXR
KA8028
Dome 28cc (200 lbs.-98 Octane)
ADA 800SXR
KA8030
Dome 30cc (190 lbs.-95 Octane)
ADA 800SXR
KA8032
Dome 32cc (180 lbs.-91 Octane)
ADA 800SXR
KA800BRK-CARB
Cable Bracket
to use with stock carburetors
ADA 800SXR O-Ring Kit
ORKIT750
***All ADA Domes are sold individually
KAWASAKI 800 SXR GASKETS
Description
OEM No.
800 Top Kit
800 Complete Kit
Head Stainless Steel .010
Base SXR
Reed SXR (2 Req’d)
Reed SXR (2 Req’d)
40mm Carb SXR (4 Req’d)
Exhaust SXR (2 Req’d)
Headpipe SXR
Upper Muffler SXR
Muffler SXR
Part No.
7300
7310
7000
7040
7050
7430
7067
7075
7080
7090
7140
SXR
11004-3720
11060-3711
11060-3717
11060-3757
11060-3761
11060-3759
11060-3712
11060-3713
11060-3714
FACTORY PIPE COUPLER, CLAMP, AND MOUNT
Type
800SXR DRY PIPE
800SXR WET PIPE
Coupler
COMHOS0701 (3.75”)
COMHOS0094 (2.5”)
COMHOS0100 (4”)
Clamp
Mount
COMMNT0052
COMCLP0050
FACTORY PIPE O-RING
Type
800SXR DRY PIPE
184
411-75024
411-75025
411-75026
411-75027
080-75000
411-80028
411-80029
080-80000
411-75000
O-Ring Number
COMGAS0330
COMGAS0340
O-Ring Description
341 BUNA O-RING (L)
344 BUNA O-RING (S)
QTY
1
1
HIGH PERFORMANCE
BASE GASKETS
Kawasaki
800 SXR
800 SXR
800 SXR
800 SXR
800 SXR
Part No.
Thickness
20,000th Metal B0075020C
7040C
0.030 - 0.75mm*
7040D
0.040 - 1.00mm*
7040E
0.050 - 1.25mm*
7040F
0.060 - 1.50mm*
*Fiber gasket with a metal core
FUEL
SYSTEMS
A.
Part No.
331-80000
Kawasaki
Clear
Green
Red
Black
Part No.
KAALWK537CL
KAALWK537GN
KAALWK537RD
KAALWK537BK
Part No.
TBM110
TBM110P
B.
WET WOLF FREESTYLE CONE
BILLET DRIVE COUPLER SET
Kawasaki
Part No.
A. 750SS 94-97, XI 93-97,
KA800DCS
ZXI 95-97, SXI 95-97, 800SXR
B. 800SX Light Weight
KAWASAKI DRIVE SHAFT
REBUILD KIT
Kawasaki
800SXR Drive Shaft
Kawasaki
800SXR, 750SX, SXI-Pro
Part No.
FSKW3
Part No.
54-8000
TBM103
121-80001
Kawasaki
Part No.
800SXR Limited Ride Plate 121-80000
800SXR Pro Series Ride Plate 121-80001
Kawasaki
Super Pump Cone
Part No.
TBM120
R&D PUMP PLUG KIT
Kawasaki
750/800 Stand-up
Part No.
161-80000
WR311
WR310
Kawasaki
800SXR
Part No.
MR-SXR-002
WORX DOMINATOR
RIDE PLATE
Kawasaki
Part No.
800SXR 03-06
WR310
800SXR 03-06 Double Concave WR311
Kawasaki
Black
Silver
Part No.
TBM123
TBM123-S
FOUR
STROKE
MOTOINE RACING
CARBON RIDE PLATE
TBM RACING
“SIGNATURE SERIES”
SX-R RIDE PLATE
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
KAWASAKI 800SXR
RIDE PLATES
SUPER PUMP CONE “PRO”
KAWASAKI 750/800
BODY
121-80000
EXHAUST
Kawasaki
800 SXR Exhaust
Power Sleeve
Kawasaki
Black
Polished
Fits Kawasaki 800SXR only.
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
The new R&D billet aluminum Exhaust power
Sleeve is designed to insert into the stinger of the
stock exhaust to reduce the stinger size thereby
increasing back pressure. This is a simple
installation that will increase top speed and add
100 RPM.
TBM BILLET EXHAUST
FLANGE FOR 800SXR
BILLET EXHAUST NOZZLE
FOR 800SXR
ENGINE/
GASKETS
R&D KAWASAKI 800 SXR
EXHAUST POWER SLEEVE
185
R&D AQUAVEIN
KAWASAKI 800SXR STEALTH
Kawasaki
800SXR STEALTH Series
Part No.
111-80001
WORX MAXILOADER
Kawasaki
800SXR 03-06
800SXR 03-06 Dominator
Part No.
WR222
WR225
STEERING WATERLINE ELECTRICAL DRIVE LINE
& CONTROLS /BILGE
HANDLING
EXHAUST
ENGINE/
GASKETS
FUEL
SYSTEMS
WR225
SATO ENGINEERING
DROP NOZZLE KIT
FOR 800SXR
Kawasaki
Part No.
SE-013014
Drop Nozzle Kit 800SXR
(Standard Ring 79/83)
SE-013013-Cable
Cable Only
SE-013013-size
Ring Only
*Available size: 76/77/78/79/80/81
SKAT TRAK IMPELLERS
FOR 800SXR
Description
Stock
Ltd.
Mod.
Part No.
SKC75SW1318
SKC75SW1419
SKC75SW1520
TBM RACING
SUPER SCOOP™
Kawasaki
800 SXR Super Scoop
Part No.
TBM100
SOLAS DYNAFLY IMPELLER
Description
Stock
Ltd.
Mod.
Part No.
KP-DF-13/22
KP-DF-14/23
KP-DF-15/24
/82/83/84/85/86/87
BODY
A.
FOUR
STROKE
FREESTYLE CHEMICAL SERVICE TOOLS ACCESSORIES
& 800SXR
/HARDWARE
B.
186
TBM SPONSONS FOR
KAWASAKI 800SXR
Kawasaki
800 SXR
Part No.
TBM-101
SXR BOW EYE
COMPOSITE FRONT COVER
Description
SXR Bow Eye
Composite Front Cover
Part No.
KASRC0840
R&D G-FORCE SPONSONS
TUBBIE SPONSONS
Description
Kawasaki
800SXR Rear Sponsons
Part No.
121-00800
SX-R BILLET HOOD LATCHES
Description
Billet Hood Latches
Part No.
TBM109
A.Tubbie 1 –
Rec-Surf-Freeride-Freestyle
B.Tubbie 2 –
Race Model Only
Part No.
AWC0212
AWC0213
OEM SXR HOOD AIR
INTAKE BLOCK-OFF KIT
Description
Intake Block-Off
Part No.
03-04-001
FUEL
SYSTEMS
Description
Hood Insert
Part. No.
KASRCO0608
Kawasaki
Part No.
Clear
Green
Red
Black
KASRAC175CL
KASRAC175GN
KASRAC175RD
KASRAC175BK
TBM KAWASAKI
BILLET GAS CAPS
Kawasaki
Part No.
TBM105-C
TBM105-B
TBM105-G
Inside View
CARBON FIBER GAS CAP
Description
800SXR Carbon Fuel Cap
Part No.
CC-KAW1
SATO ENGINEERING
MOON CAP II
Description
Silver
Black
Green
Red
Blue
Kawasaki
SE-019101
SE-019109
SE-019104
SE-019103
SE-019102
Yamaha
SE-019111
SE-019119
SATO ENGINEERING
MOON CAP STAR
SE-019113
SE-019112
Description
Kawasaki
SE-019201
SE-019209
SE-019204
SE-019203
SE-019202
Description
Limiting Rope Kit
Part No.
YA-09100
UMI SEALED BEARING
STEERING SYSTEM
Description
Mounting System
800SXR Turn Plate
Part No.
JS-04103
JS-04105-CLR
UMI RACING BILLET
ALUMINUM
HANDLE POLE
Description
Description
Hood Bumper Clear
Hood Bumper Green
Hood Bumper Red
Part No.
KAALWK542CL
KAALWK542GN
KAALWK542RD
UMI HANDLE POLE KIT
FOR KAWASAKI 800SXR
Description
800SXR Handle Pole Kit
Part No.
JS-09200
Standard Black
YA-09010-BLK
Standard Clear
YA-09011-CLR
-2” Black
YA-09012-BLK
-2” Clear
YA-09013-CLR
* Please see page 116 & 117 for
handlepole conversion details
FOUR
STROKE
SXR BILLET HOOD BUMPER
Part No.
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
UMI LIMITING ROPE
BODY
Silver
Black
Green
Red
Blue
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
Clear
Black
Green
EXHAUST
HOOD BAFFLE INSERT FOR
FACTORY PIPE SXR
ENGINE/
GASKETS
BLOWSION BILLET
GAS CAPS
187
FUEL
SYSTEMS
ENGINE/
GASKETS
EXHAUST
800SXR
NEW PROGRAMMABLE
IGNITION FOR 800 SX-R 800
Part No.
IGNI800SXR
Description
Resistor Plug
Solid Resistor Plug
Iridium Plug
Part No.
BR8ES
BR8ES-SOLID
BR8EIX
RICH ROY PRODUCTS
ADJUSTABLE HANDLEPOLE
Description
Kawasaki
SAMORA’S BILLET SEALED
BEARING TURN PLATE
FOR KAWASAKI OEM
HANDLEPOLE
KAWASAKI 800SXR
HANDLEPOLE BRACKET
Kawasaki 800 SXR
1 Hole
2 Holes
Part No.
BR-KAW-1H
BR-KAW-2H
Kawasaki
750 SX/SXI/SXI-Pro
800 SX-R
Part No.
SSP-1005
SSP-1006
Part No.
HD-KAW
HANDLE POLE SPRING
Description
800SXR
Part No.
KA800AC
A.
BODY
STEERING WATERLINE ELECTRICAL DRIVE LINE
& CONTROLS /BILGE
HANDLING
Description
Kawasaki 800 SXR
Programmable Ignition
NGK SPARK PLUGS
FOR 800SXR
FOUR
STROKE
FREESTYLE CHEMICAL SERVICE TOOLS ACCESSORIES
& 800SXR
/HARDWARE
B.
188
R&D SPRING TENSIONER
KAWASAKI 800SXR
JSU SPRING TENSIONER
KAWASAKI 800SXR
Kawasaki
Part No.
Kawasaki
Part No.
800SXR
521-80000
800SXR
JSU-800STB
UMI FREE STYLE HANDLE BARS
Models
Yamaha/Kawasaki 0 Degrees
Yamaha/Kawasaki 0 Degrees
Yamaha/Kawasaki 4 Degrees
Yamaha/Kawasaki 4 Degrees
Surface
Polish
Black
Polish
Black
Pad Size
Part No.
Small
YA-01105POL
Small
YA-01105BKA
Small
YA-01106POL
Small
YA-01106BKA
TBM RACING TENSIONER
KAWASAKI 800SXR
Kawasaki
Part No.
A. 800SXR Short
B. 800SXR Tall
TBM104-S
TBM104-T
EXTENDED HANDLE BARS
Models
Yamaha/ Kawasaki
Yamaha/ Kawasaki
Yamaha/ Kawasaki
0 Degrees
4 Degrees
7 Degrees
Surface
Polished
Polished
Polished
Part No.
58-5130
58-5132
58-5135
800 SXR
800 SXR
Green/White
Flame-Red
Flame-Green
FUEL
SYSTEMS
800 SXR
Part No. Kawasaki
KA800SXRCP-SUPER Super Chin Pad
800 SXR
800 SXR
Side Mat for New Rail Cap
Kick Tail
Kawasaki
Part No. Kawasaki
Part No. Kawasaki
New Rail Cap
KA800SXRRCNW Side Mat
KA800SXRSMRC Kick Tail
* Must use with KA800SXRSMRC
* This Side Mat is specially designed for
wrapping onto New Rail Cap.
Part No.
KA800KICK
AP DESIGNS 800 SXR MAT
Kawasaki
Part No.
Side Mat
KA800SXSM
Side Mat with Lifter 10” KA800SXSM-LFT
Side Mat with Lifter 15” KA800SXSM-LFT15
Bottom Mat
KA800SXRBM
DRIVE LINE ELECTRICAL WATERLINE STEERING
HANDLING
/BILGE & CONTROLS
New Design Rail Cap
Part No.
KA800SXRCP-FL-GN
EXHAUST
800 SXR
Part No. Kawasaki
KA800SXRCP-FL-RD Super Chin Pad
ENGINE/
GASKETS
Kawasaki
Super Chin Pad
Extended
BODY
HT68K
HYDROTURF KICK TAIL & 800 SXR MAT
COVERCRAFT COVER
Description
800 SXR
Part No.
XW865BL
Description
Standup Kit Setup
98” per side
Part No.
JSU-800-BUMPER
Part No.
KICK01
HT68K-BLK
HT68R-BLK
HT68-BLK
RIVA 800 SX-R
RAIL MOLDING KITS
SX-R TBM RACE BUMPERS
Description
Part No.
Description
Bumpers 800SXR
TBM117
SX-R
FOUR
STROKE
SXR SIDE RAIL MOLDINGS
Description
Kick Tail 5.5”x18”x1” Tall
KAW800SXR Mat with Kick Tail
KAW800SXR Mat with Kick Tail
and Side Lifter
Standard 800 SXR Mat
ACCESSORIES SERVICE TOOLS CHEMICAL FREESTYLE
/HARDWARE
& 800SXR
KICK01
Part No.
RK5-RMK-080
189

Similar documents

superjet 96+ freestyle

superjet 96+ freestyle Description Part No. Yamaha “Kawasaki Dampener Type” SJ DriveCouplerCover YAAMAL332 SuperPumpCone TBM120-YAM R&D Yamaha

More information

Denotes when the gasket is

Denotes when the gasket is 701-81mm 33cc (200Lbs/105 Octane) YA2133L 701-81mm 35cc (185Lbs/92 Octane) * YA2135L * 35cc Dome for 100 Octane with Dry Pipe 701-81mm 37cc (170Lbs/92 Octane) YA2137L 760-84mm 31cc (230Lbs/115 Octa...

More information