Pneumatics command valves

PneumaxCatalogo 2012 Capitolo1_GB.book Page 50 Thursday, June 27, 2013 12:05 PM
Pneumatics
command valves
General
The pneumatic actuated valves are grouped in this part of catalogue because they have similar
operating conditions of the solenoid valves. In fact the commutation signal is remote as it is for the
manual and mechanical actuated valves.
1
In the first part of these catalogues are listed the pneumatic actuated valves for single use not
suitable to be assembled on bases but eventually on manifold with one inlet port only.
The valves series 800 are suitable for both single and ganged applications. These valves have a
diversified use of 3-ways and 5-ways based on balanced spool as shown on functional symbols.
The repositions are made by spring, differential pneumatic spring or pneumatic fot the bistable and
centre spring return.
Construction characteristics
Body
Actuators
Bottom plates
Series 104
Technopolymer
/
Series 105
Series 805
Aluminium
/
Aluminium
Aluminium
Series 808
Series 228
Pistons
Aluminium
Spacers
Technopolymer
/
Aluminium
Technopolymer
Technopolymer
Seals
NBR
Aluminium
NBR
Steel
Springs
Stainless steel
Spring steel
Stainless steel
Spring steel
Spring steel
Technopolymer
(Ver. 3/2-5/2)
Technopolymer
Series T228
NBR
Spring steel
Steel
(Ver.5/3)
Technopolymer
Aluminium
NBR
Series T488
Steel
Technopolymer
(Ver. 3/2- 5/2)
NBR
Technopolymer
Series T488
Stainless steel
Steel
(Ver. 5/3)
Series 224
Steel
HNBR
Series T228
Series 488
Spools
Aluminium
Technopolymer
Aluminium
Technopolymer
NBR
Series T224
(Ver. 3/2-5/2)
Technopolymer
Series T224
Series 212
Aluminium
Series 211
Spring steel
Technopolymer
Spring steel
Steel
Stainless steel
NBR
(Ver. 5/3)
Series 212/2
Steel
Technopolymer
NBR
Steel
/
Polyurethane
Aluminium
NBR
Steel
Aluminium
Spring steel
Use and maintenance
These valves have an average life of 15 million cycles depending on the application and air quality,
filtered and lubricated air using specified lubricants will dramatically reduce the wear of the seals and
ensures long and trouble free operation.
Please ensure that the valve is being used according with the manufacturers specification, such as
air pressure and temperature and that exhaust ports 3 & 5 are protected against the possible ingress
of dirt or debris.
Repair kits including the spool complete with seals are available for overhauling the valves; however,
although this is a simple operation it should be carried out by a competent person.
ATTENTION: use hydraulic oil class H for lubrication such as MAGNA GC 32 (Castrol).
1.50
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 51 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 2/2 - 3/2 - 5/2
ø4 tube and M5
Series 100 Pneumatic
command
2/2
3/2
Pneumatic - Spring
Lateral connections
Ordering code
104.t.11.1.cf
t
c
f
2/2
3/2
Pneumatic - Spring
Rear connections
TYPE
22 = 2 ways
32 = 3 ways
CONNECTION TYPE
L = Lateral
P = Rear
FUNCTION
A = Normally Open (N.O.)
C = Normally Closed (N.C.)
1
Weight gr. 25
Minimum piloting pressure 2,5 bar
Operational
characteristics
ø4 tube
Serie
Pneumatic
100_GB_2012_Pne
and-actuated
Spring
M5
valves 2/2 - 3/2 - 5/2 - ø4 tube and M5
Weight gr. 25
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Spring
Operating
Temperature
Min.
Max.
-5°C
+50°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
90 Nl/min
mm 2,5
ø4 tube
M5
Pneumatic - Spring
5/2
105.t.11.1
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 90
Minimum piloting pressure 2,5 bar
Operational
characteristics
ø4 tube and-actuated
Pneumatic
Spring
M5
valves 2/2 - 3/2 - 5/2
Weight gr. 100
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential external
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
120 Nl/min
mm 2,5
M5
M5
5/2
Pneumatic - Differential external
105.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum piloting pressure 2,5 bar
Operational
characteristics
ø4 tube and-actuated
Pneumatic
Differential
M5
valves
external
2/2 - 3/2 - 5/2
Weight gr. 120
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
120 Nl/min
mm 2,5
M5
M5
Dimensioni di ingombro e informazioni tecniche sono fornite a puro titolo informativo e possono essere modificate senza preavviso.
1.51
PneumaxCatalogo 2012 Capitolo1_GB.book Page 52 Thursday, June 27, 2013 12:05 PM
Series 100 Pneumatic
Pneumatic actuated valves 2/2 - 3/2 - 5/2
ø4 tube and M5
command
Pneumatic - Pneumatic
Ordering code
3/2
Pneumatic - Pneumatic
5/2
105.t.11.11
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum piloting pressure 2,5 bar
Operational
characteristics
ø4 tube and-actuated
Pneumatic
Pneumatic
M5
valves 2/2 - 3/2 - 5/2
1.52
Weight gr. 120
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
120 Nl/min
mm 2,5
M5
M5
Dimensioni di ingombro e informazioni tecniche sono fornite a puro titolo informativo e possono essere modificate senza preavviso.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 53 Thursday, June 27, 2013 12:05 PM
Compact distributors M5 3/2 - 5/2
individual and for manifold
Pneumatic - Spring
Series 805 Pneumatic
command
Ordering code
3/2
Pneumatic - Spring
5/2
805.t.11.1
t
TYPE
32 = 3 ways
52 = 5 ways
1
Weight gr. 45
Minimum piloting pressure 2 bar
Operational
characteristics
individual
Serie
Compact
Pneumatic
805_GB_2012_Pne
distributors
and
- Spring
for manifold
M5 3/2 - 5/2 - individual and for manifold
Weight gr. 50
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
160 Nl/min
mm 2,5
M5
M5
Pneumatic - Differential
5/2
805.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 50
Minimum piloting pressure 2 bar
Operational
characteristics
Compact distributors
individual
Pneumatic
and
- Differential
for manifold
M5 3/2 - 5/2
Weight gr. 55
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Pneumatic
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
160 Nl/min
mm 2,5
M5
M5
Pneumatic - Pneumatic
5/2
805.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 55
Minimum piloting pressure 1,5 bar
Operational
characteristics
Compact distributors
individual
Pneumatic
and
- Pneumatic
for manifold
M5 3/2 - 5/2
Weight gr. 60
Minimum piloting pressure 1,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
160 Nl/min
mm 2,5
M5
M5
Specifications may be subject to change without prior notice.
1.53
PneumaxCatalogo 2012 Capitolo1_GB.book Page 54 Thursday, June 27, 2013 12:05 PM
Series 200 Pneumatic
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/8"
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
228.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum piloting pressure 2,5 bar
Operational
characteristics
Serie
G1/8" 200_GB_2012_Pne
Pneumatic
-actuated
Spring valves 2/2 - 3/2 - 5/2 - G1/8"
Weight gr. 130
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential external
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
540 Nl/min
mm 6
G 1/8"
G 1/8"
5/2
Pneumatic - Differential external
228.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 140
Minimum piloting pressure 2,5 bar
Operational
characteristics
Pneumatic
G1/8"
-actuated
Differential
valves
external
2/2 - 3/2 - 5/2
Weight gr. 160
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential self aligned
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
540 Nl/min
mm 6
G 1/8"
G 1/8"
5/2
Pneumatic - Differential self aligned
228.t.11.12/1
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 130
Minimum piloting pressure 2,5 bar
Operational
characteristics
Pneumatic
G1/8"
-actuated
Differential
valves
self 2/2
aligned
- 3/2 - 5/2
1.54
Weight gr. 150
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
540 Nl/min
mm 6
G 1/8"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 55 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/8"
Pneumatic - Pneumatic
Series 200 Pneumatic
command
Ordering code
3/2
Pneumatic - Pneumatic
5/2
228.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
1
Weight gr. 140
Minimum piloting pressure 2 bar
Operational
characteristics
Pneumatic -actuated
G1/8"
Pneumatic
valves 2/2 - 3/2 - 5/2
Weight gr. 160
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Amplified pneumatic - Spring
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
540 Nl/min
mm 6
G 1/8"
G 1/8"
5/2
Amplified pneumatic - Spring
228.t.13.1
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 260
Minimum piloting pressure 0,5 bar
Operational
characteristics
Pneumaticpneumatic
Amplified
G1/8"
actuated valves
- Spring
2/2 - 3/2 - 5/2
Weight gr. 290
Minimum piloting pressure 0,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
540 Nl/min
mm 6
G 1/8"
G 1/8"
Pneumatic - Pneumatic
5/3
Ordering code
228.53.f.11.11
f
FUNCTION
31 = Closed centres
32 = Open centres
33 = Pressured centres
Weight gr. 180
Minimum piloting pressure 3 bar
Operational
characteristics
Pneumatic -actuated
G1/8"
Pneumatic
valves 2/2 - 3/2 - 5/2
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
410 Nl/min
mm 6
G 1/8"
G 1/8"
Specifications may be subject to change without prior notice.
1.55
PneumaxCatalogo 2012 Capitolo1_GB.book Page 56 Thursday, June 27, 2013 12:05 PM
Series 200 Pneumatic
Valves "Tecno228"
3/2 - 5/2 - 5/3 - G 1/8"
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
T228.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 65
Minimum operating pressure 2,5 bar
Operational
characteristics
3/2 - 5/2
Serie
Valves
Pneumatic
200_GB_2012_Pne
"Tecno228"
- 5/3
- Spring
- G 1/8"
- 3/2 - 5/2 - 5/3 - G 1/8"
Weight gr. 78
Minimum operating pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential (external)
Operating
Temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Orifice
size
Working
ports size
Pilot ports
size
620 Nl/min
mm 6
G 1/8"
G 1/8"
Ordering code
3/2
5/2
Pneumatic - Differential (external)
T228.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 74
Minimum operating pressure 2,5 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"Tecno228"
- 5/3
- Differential
- G 1/8" (external)
Weight gr. 86
Minimum operating pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential self-feeding
Operating
Temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Orifice
size
Working
ports size
Pilot ports
size
620 Nl/min
mm 6
G 1/8"
G 1/8"
Ordering code
3/2
5/2
Pneumatic - Differential self-feeding
T228.t.11.12/1
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 70
Minimum operating pressure 2,5 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"Tecno228"
- 5/3
- Differential
- G 1/8" self-feeding
1.56
Weight gr. 82
Minimum operating pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Orifice
size
Working
ports size
Pilot ports
size
620 Nl/min
mm 6
G 1/8"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 57 Thursday, June 27, 2013 12:05 PM
Valves "Tecno228"
3/2 - 5/2 - 5/3 - G 1/8"
Series 200 Pneumatic
command
Pneumatic - Pneumatic
Ordering code
3/2
Pneumatic - Pneumatic
5/2
T228.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
1
Weight gr. 77
Minimum operating pressure 2 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"Tecno228"
- 5/3
- Pneumatic
- G 1/8"
Weight gr. 90
Minimum operating pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Orifice
size
Working
ports size
Pilot ports
size
620 Nl/min
mm 6
G 1/8"
G 1/8"
Pneumatic - Pneumatic 3 positions
5/3
Ordering code
T228.53.f.11.11
18
Q4.2
36
33 = Pressured Centres
Q4.2
38
121
32 = Open Centres
G1/8"
f
65.5
FUNCTION
Q4.2
18
G1/8"
20
32
Weight gr. 110
Minimum operating pressure 3 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"Tecno228"
- 5/3
- Pneumatic
- G 1/8" 3 positions
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Orifice
size
Working
ports size
Pilot ports
size
410 Nl/min
mm 6
G 1/8"
G 1/8"
Specifications may be subject to change without prior notice.
1.57
PneumaxCatalogo 2012 Capitolo1_GB.book Page 58 Thursday, June 27, 2013 12:05 PM
Series 400 Pneumatic
Valves "TECNO-ECO" G 1/8"
3/2 - 5/2
command
Pneumatic - Spring
Ordering code
3/2
Pneumatico - Molla
5/2
T488.t.11.1
38
Ø4.2
36
Ø4.2
18
83
100
27
G1/8"
M5
25
19
Ø3.25
5
Q3.2
M5
19
M5
M5
Ø4.2
25
Q4.2
4.5
4.5
35
26
Q4.2
TYPE
32 = 3 ways
52 = 5 ways
35
1
t
Q4.2
26
20
18
G1/8"
32
Weight gr. 75
Minimum operating pressure 2,5 bar
Operational
characteristics
3/2 - 5/2
Serie
Valves
Pneumatic
Pneumatico
400_GB_2012_Pne
"TECNO-ECO"
- -Spring
Molla G 1/8" - 3/2 - 5/2
Fluid
Max working
pressure
Operating
Temperature
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Filtered and
lubricated air
10
-5 ÷ +50
620
6
G 1/8"
Pneumatic - Differential (external)
Ordering code
3/2
Pneumatic - Differential (external)
5/2
T488.t.11.12
t
36
Ø4.2
18
83
100
27
G1/8"
M5
25
19
Ø3.25
5
Q3.2
G1/8"
32
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"TECNO-ECO"
- DifferentialG(external)
1/8"
M5
19
M5
M5
Ø4.2
25
Q4.2
4.5
4.5
35
26
38
Ø4.2
35
Q4.2
Q4.2
TYPE
32 = 3 ways
52 = 5 ways
26
20
18
Fluid
Max working
pressure
Operating
Temperature
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Filtered and
lubricated air
10
-5 ÷ +50
620
6
G 1/8"
Pneumatic - Pneumatic
Ordering code
3/2
Pneumatic - Pneumatic
5/2
T488.t.11.11
t
36
Ø4.2
18
83
100
27
G1/8"
M5
25
19
Ø3.25
5
Q3.2
M5
19
M5
M5
Ø4.2
25
Q4.2
4.5
4.5
35
26
38
Ø4.2
35
Q4.2
Q4.2
TYPE
32 = 3 ways
52 = 5 ways
26
20
18
G1/8"
32
Minimum operating pressure 2 bar (for Pneumatic-Pneumatic
version)
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"TECNO-ECO"
- PneumaticG 1/8"
1.58
Fluid
Max working
pressure
Operating
Temperature
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Filtered and
lubricated air
10
-5 ÷ +50
620
6
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 59 Thursday, June 27, 2013 12:05 PM
Valves "TECNO-ECO" G 1/8"
5/3
Series 400 Pneumatic
command
Pneumatic - Pneumatic
5/3
Ordering code
T488.53.f.11.11
38
FUNCTION
32 = Open Centres
26
f
1
Ø4.2
36
35
Ø4.2
18
Ø4.2
112
27
25
M5
19
M5
4.5
33 = Pressured Centres
Ø3.25
G1/8"
Weight gr. 140
Minimum operating pressure 3 bar
Operational
characteristics
Serie 400_GB_2012_Pne
5/3
Valves
Pneumatic
"TECNO-ECO"
- PneumaticG 1/8" - 5/3
Fluid
Max working
pressure
Operating
Temperature
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Filtered and
lubricated air
10
-5 ÷ +50
410
6
G 1/8"
Specifications may be subject to change without prior notice.
1.59
PneumaxCatalogo 2012 Capitolo1_GB.book Page 60 Thursday, June 27, 2013 12:05 PM
Series 800 Pneumatic
Compact distributors G1/8" 3/2 - 5/2 - 5/3
Individual and for manifold
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
808.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 95
Minimum piloting pressure 2 bar
Operational
characteristics
Individual
Serie
Compact
Pneumatic
800_GB_2012_Pne
distributors
and
- Spring
for manifold
G1/8" 3/2 - 5/2 - 5/3 - Individual and for manifold
Weight gr. 100
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
520 Nl/min
mm 4
G 1/8"
M5
Pneumatic - Differential
5/2
808.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 105
Minimum piloting pressure 2 bar
Operational
characteristics
Compact distributors
Individual
Pneumatic
and
- Differential
for manifold
G1/8" 3/2 - 5/2 - 5/3
Weight gr. 110
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Pneumatic
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
520 Nl/min
mm 4
G 1/8"
M5
Pneumatic - Pneumatic
5/2
808.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 115
Minimum piloting pressure 1,5 bar
Operational
characteristics
Compact distributors
Individual
Pneumatic
and
- Pneumatic
for manifold
G1/8" 3/2 - 5/2 - 5/3
1.60
Weight gr. 120
Minimum piloting pressure 1,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
520 Nl/min
mm 4
G 1/8"
M5
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 61 Thursday, June 27, 2013 12:05 PM
Compact distributors and electrodistributors G1/8"
Individual and for manifold
Series 800 Pneumatic
command
Manifolds
Ordering code
808.n
n
1
N. PORTS
02 = 2 ports (weight gr. 180)
03 = 3 ports (weight gr. 245)
04 = 4 ports (weight gr. 310)
05 = 5 ports (weight gr. 375)
06 = 6 ports (weight gr. 440)
07 = 7 ports (weight gr. 500)
08 = 8 ports (weight gr. 560)
09 = 9 ports (weight gr. 620)
10 = 10 ports (weight gr. 680)
Individual
Serie
Compact
Manifolds
800_GB_2012_Pne
distributors
and for manifold
and electrodistributors G1/8" - Individual and for manifold
Clip
Ordering code
800.00
Weight gr. 5
(for mounting the distributors groups on guide DIN 46277/3)
Compact distributors
Individual
Clip
and for manifold
and electrodistributors G1/8"
Closing plate
Ordering code
808.00
Weight gr. 65
Compactplate
Individual
Closing
distributors
and for manifold
and electrodistributors G1/8"
Specifications may be subject to change without prior notice.
1.61
PneumaxCatalogo 2012 Capitolo1_GB.book Page 62 Thursday, June 27, 2013 12:05 PM
Series 224 Pneumatic
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/4"
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
224.t.11.1
t
Ø5,5
30
40
50
G1/4
22
G1/4
40
50
126
62
Ø5,5
104
22
62
G1/8
60
1
G1/8
TYPE
32 = 3 ways
52 = 5 ways
30
Weight gr. 370
Minimum piloting pressure 2,5 bar
Operational
characteristics
Serie
G1/4" 224_GB_2012_Pne
Pneumatic
-actuated
Spring valves 2/2 - 3/2 - 5/2 - G1/4"
Weight gr. 450
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Pneumatic - Differential external
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
1360 Nl/min
mm 8
G 1/4"
G 1/8"
Pneumatic - Differential external
5/2
224.t.11.12
40
30
40
50
50
G1/4
60
146
G1/4
22
62
Ø5,5
22
124
62
G1/8
Ø5,5
t
G1/8
TYPE
32 = 3 ways
52 = 5 ways
30
Weight gr. 480
Minimum piloting pressure 2,5 bar
Operational
characteristics
Pneumatic
G1/4"
-actuated
Differential
valves
external
2/2 - 3/2 - 5/2
Weight gr. 550
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Pneumatic - Pneumatic
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
1360 Nl/min
mm 8
G 1/4"
G 1/8"
Pneumatic - Pneumatic
5/2
224.t.11.11
40
30
G1/4
60
40
50
50
146
G1/4
22
62
Ø5,5
22
124
62
G1/8
Ø5,5
t
G1/8
TYPE
32 = 3 ways
52 = 5 ways
30
Weight gr. 470
Minimum piloting pressure 2 bar
Operational
characteristics
Pneumatic
G1/4"
-actuated
Pneumatic
valves 2/2 - 3/2 - 5/2
1.62
Weight gr. 540
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
1360 Nl/min
mm 8
G 1/4"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 63 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/4"
Series 224 Pneumatic
command
Pneumatic - Pneumatic
5/3
Ordering code
224.53.f.11.11
f
1
FUNCTION
31 = Closed centres
32 = Open centres
33 = Pressured centres
Weight gr. 550
Minimum piloting pressure 3 bar
Operational
characteristics
Pneumatic -actuated
G1/4"
Pneumatic
valves 2/2 - 3/2 - 5/2
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
1280 Nl/min
mm 8
G 1/4"
G 1/8"
1.63
PneumaxCatalogo 2012 Capitolo1_GB.book Page 64 Thursday, June 27, 2013 12:05 PM
Series 224 Pneumatic
Valves "TECNO-ECO" G 1/4"
3/2 - 5/2
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
T224.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum operating pressure 2,5 bar
Operational
characteristics
3/2 - 5/2
Serie
Valves
Pneumatic
224_GB_2012_Pne
"TECNO-ECO"
- Spring G 1/4" - 3/2 - 5/2
Weight gr. 140
Minimum operating pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential (external)
Operating
temperature
Min.
Max.
-5°C
+50°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Ø orifice
size
Working port
size
Pilot
port size
1050 Nl/min
mm 8,5
G 1/4"
G 1/8"
5/2
Pneumatic - Differential (external)
T224.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum operating pressure 2 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"TECNO-ECO"
- DifferentialG(external)
1/4"
Weight gr. 140
Minimum operating pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Pneumatic
Operating
temperature
Min.
Max.
-5°C
+50°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Ø orifice
size
Working port
size
Pilot
port size
1050 Nl/min
mm 8,5
G 1/4"
G 1/8"
Pneumatic - Pneumatic
5/2
T224.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 110
Minimum operating pressure 2 bar
Operational
characteristics
Valves
3/2
Pneumatic
- 5/2"TECNO-ECO"
- PneumaticG 1/4"
1.64
Weight gr. 140
Minimum operating pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Ø orifice
size
Working port
size
Pilot
port size
1050 Nl/min
mm 8,5
G 1/4"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 65 Thursday, June 27, 2013 12:05 PM
Valves "TECNO-ECO" G 1/4"
5/3
Series 224 Pneumatic
command
Pneumatic - Pneumatic 3 positions
5/3
Ordering code
T224.53.f.11.11
f
1
FUNCTION
31 = Closed centres
32 = Open centres
33 = Pressured centres
Weight gr. 160
Minimum operating pressure 3 bar
Operational
characteristics
Serie 224_GB_2012_Pne
5/3
Valves
Pneumatic
"TECNO-ECO"
- PneumaticG31/4"
positions
- 5/3
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
temperature
Min.
Max.
-5°C
+50°C
Flow rate at 6 bar
with p=1
Ø orifice
size
Working port
size
Pilot
port size
900 Nl/min
mm 8,5
G 1/4"
G 1/8"
1.65
PneumaxCatalogo 2012 Capitolo1_GB.book Page 66 Thursday, June 27, 2013 12:05 PM
Series 212 Pneumatic
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/2"
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
212.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 1110
Minimum piloting pressure 2,5 bar
Operational
characteristics
Serie
G1/2" 212_GB_2012_Pne
Pneumatic
-actuated
Spring valves 2/2 - 3/2 - 5/2 - G1/2"
Weight gr. 1390
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential external
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3500 Nl/min
mm 15
G 1/2"
G 1/8"
5/2
Pneumatic - Differential external
212.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 1380
Minimum piloting pressure 2,5 bar
Operational
characteristics
Pneumatic
G1/2"
-actuated
Differential
valves
external
2/2 - 3/2 - 5/2
Weight gr. 1660
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Pneumatic
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3500 Nl/min
mm 15
G 1/2"
G 1/8"
Pneumatic - Pneumatic
5/2
212.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 1350
Minimum piloting pressure 2 bar
Operational
characteristics
Pneumatic
G1/2"
-actuated
Pneumatic
valves 2/2 - 3/2 - 5/2
1.66
Weight gr. 1630
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3500 Nl/min
mm 15
G 1/2"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 67 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1/2"
Series 212 Pneumatic
command
Pneumatic - Pneumatic
5/3
Ordering code
212.53.t.11.11
f
1
FUNCTION
31 = Closed centres
32 = Open centres
33 = Pressured centres
Weight gr. 1650
Minimum piloting pressure 3 bar
Operational
characteristics
Pneumatic -actuated
G1/2"
Pneumatic
valves 2/2 - 3/2 - 5/2
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3000 Nl/min
mm 15
G 1/2"
G 1/8"
Specifications may be subject to change without prior notice.
1.67
PneumaxCatalogo 2012 Capitolo1_GB.book Page 68 Thursday, June 27, 2013 12:05 PM
Series 212 Pneumatic
Pneumatic actuated valves 3/2 - 5/2 - 5/3
G1/2" - Compact series
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
212/2.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Minimum piloting pressure 2,5 bar
Minimum piloting pressure 2,5 bar
Operational
characteristics
G1/2" 212_GB_2012_Pne
Serie
Pneumatic
- Compact
-actuated
Spring
series
valves 3/2 - 5/2 - 5/3 - G1/2" - Compact series
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential
Operating
Temperature
Min.
Max.
-5°C
+70°C
Orifice
size
Working port
size
Pilot port
size
3600 Nl/min
mm 15
G 1/2"
G 1/8"
Ordering code
3/2
Diff. external - N.C.
Flow rate at 6 bar
with p=1
Pneumatic - Differential
5/2
Diff. external
212/2.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Minimum piloting pressure 2,5 bar
Minimum piloting pressure 2,5 bar
Operational
characteristics
G1/2" - Compact
Pneumatic
-actuated
Differential
series
valves 3/2 - 5/2 - 5/3
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential
Operating
Temperature
Min.
Max.
-5°C
+70°C
Orifice
size
Working port
size
Pilot port
size
3600 Nl/min
mm 15
G 1/2"
G 1/8"
Ordering code
3/2
Diff. self aligned
Flow rate at 6 bar
with p=1
Pneumatic - Differential
5/2
Diff. self aligned
212/2.t.11.12/c
t
c
TYPE
32 = 3 ways
52 = 5 ways
1.C = 3 ways Norm. closed
1.A = 3 ways norm. open
1 = 5 ways diff. self aligned
Minimum piloting pressure 2,5 bar
Minimum piloting pressure 2,5 bar
Operational
characteristics
G1/2" - Compact
Pneumatic
-actuated
Differential
series
valves 3/2 - 5/2 - 5/3
1.68
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3600 Nl/min
mm 15
G 1/2"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 69 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 3/2 - 5/2 - 5/3
G1/2" - Compact series
Pneumatic - Pneumatic
Series 212 Pneumatic
command
Ordering code
3/2
Pneumatic - Pneumatic
5/2
212/2.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
1
Minimum piloting pressure 2,5 bar
Minimum piloting pressure 2,5 bar
Operational
characteristics
G1/2" - Compact
Pneumatic
-actuated
Pneumatic
series
valves 3/2 - 5/2 - 5/3
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3600 Nl/min
mm 15
G 1/2"
G 1/8"
Pneumatic - Pneumatic
5/3
Ordering code
212/2.53.f.11.11
f
FUNCTION
31 = Closed centres
32 = Open centres
33 = Centri in pressione
Minimum piloting pressure 3 bar
Operational
characteristics
G1/2" - Compact
Pneumatic
-actuated
Pneumatic
series
valves 3/2 - 5/2 - 5/3
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
3300 Nl/min
mm 15
G 1/2"
G 1/8"
Specifications may be subject to change without prior notice.
1.69
PneumaxCatalogo 2012 Capitolo1_GB.book Page 70 Thursday, June 27, 2013 12:05 PM
Series 211 Pneumatic
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1"
command
Pneumatic - Spring
Ordering code
3/2
Pneumatic - Spring
5/2
211.t.11.1
t
1
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 3330
Minimum piloting pressure 2,5 bar
Operational
characteristics
Serie 211_GB_2012_Pne
G1"
Pneumatic
-actuated
Spring valves 2/2 - 3/2 - 5/2 - G1"
Weight gr. 4200
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Differential external
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
6500 Nl/min
mm 20
G 1"
G 1/8"
5/2
Pneumatic - Differential external
211.t.11.12
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 3330
Minimum piloting pressure 2,5 bar
Operational
characteristics
Pneumatic -actuated
G1"
Differential
valves
external
2/2 - 3/2 - 5/2
Weight gr. 4200
Minimum piloting pressure 2,5 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Pneumatic - Pneumatic
Operating
Temperature
Min.
Max.
-5°C
+70°C
Ordering code
3/2
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
6500 Nl/min
mm 20
G 1"
G 1/8"
Pneumatic - Pneumatic
5/2
211.t.11.11
t
TYPE
32 = 3 ways
52 = 5 ways
Weight gr. 3330
Minimum piloting pressure 2 bar
Operational
characteristics
Pneumatic -actuated
G1"
Pneumatic
valves 2/2 - 3/2 - 5/2
1.70
Weight gr. 4200
Minimum piloting pressure 2 bar
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
6500 Nl/min
mm 20
G 1"
G 1/8"
Specifications may be subject to change without prior notice.
PneumaxCatalogo 2012 Capitolo1_GB.book Page 71 Thursday, June 27, 2013 12:05 PM
Pneumatic actuated valves 2/2 - 3/2 - 5/2
G1"
Series 211 Pneumatic
command
Pneumatic - Pneumatic
5/3
Ordering code
211.53.f.11.11
f
1
FUNCTION
31 = Closed centres
32 = Open centres
Weight gr. 4200
Minimum piloting pressure 3 bar
Operational
characteristics
Pneumatic -actuated
G1"
Pneumatic
valves 2/2 - 3/2 - 5/2
Fluid
Max working
pressure
Filtered and
lubricated air
10 bar
Operating
Temperature
Min.
Max.
-5°C
+70°C
Flow rate at 6 bar
with p=1
Orifice
size
Working port
size
Pilot port
size
6500 Nl/min
mm 20
G 1"
G 1/8"
Specifications may be subject to change without prior notice.
1.71