docPartition Systems Brochure
download 
Report Transcription
Partition Systems Brochure
ALfit Pty Ltd, 5 Archimedes Street, Darra, QLD, 4076 Mob: 04999 888 00 Ph: (07) 3375 3555 [email protected] Fax: (07) 3375 5611 www.alfit.com.au Mon-Thurs 6am - 4:30pm | Friday 6am - 2:30pm Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Product Catalogue 2013 Page 2 Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Skirting & Accessories Aluminium Skirting 3 Skirting Accessories 4 Aluminium Extrusions Economy Suite 64mm Suite 5 6-10 10/64mm Suite 11-12 76mm Suite 13-14 92mm Suite 15-16 Channels 17 Hinges 17 Thresholds 17 Flat Bar 18 Angles 19 Doors Kits Door Frame Kits 20 Double Door Frame Kits 21 Highlight Door Kits 22 Adjustable Door Kits 23 Lift-off Door Kits 24 Aluminium Glass Doors 25 Glazing Kits 64 Series Glazing Frame Kits 26 10/64 Series Glazing Frame Kits 26 76 Series Glazing Frame Kits 26 92 Series Glazing Frame Kits 26 Hardware Return Air Grilles 27 Mohair 27 Anodising Rubber 27 Screws 28 Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 3 Aluminium Skirting Inclusions Code Length (mm) no tape or holes AL/100 3620 with holes no tape AL/100H 3620 with Tape and holes AL/100HT 3620 no tape or holes AL/125 3620 with Tape and holes AL/125HT 3620 no tape or holes AL/150 3620 with Tape and holes AL/150HT 3620 Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 4 Skirting Accessories Code Length (mm) AL/CS 100, 125, 150 AL/J64100 80 x 64 x 1.6 AL/J125 75 x 92 x 1.6 AL/J150 106 x 80 x 1.6 AL/AJ64 64 x 128 x 1.6 AL/AJ76 76 x 152 x 1.6 AL/AJ92 92 x 184 x 1.6 AL/SRI50B 50m roll AL/SRI50G 50m roll Surface Finish Corner stake Grey or Black Joiner Patent Pending Application No: 2010905617 Black Plastic Black Plastic Black Plastic Angle Joiner Mill Mill Mill Rubber Inserts Copyright ALfit Pty Ltd, 2013. Black Grey Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 5 Code Length (mm) 35mm Door Jamb AL/2846 6400 Glazing Channel AL/GC3 5500 45mm Snap Bead AL/8405 5500 AL/8404 5500 AL/GCA 6500 AL/GCB 6500 AL/GC3 5500 AL/SB7 6500 AL/CS1 each AL/CS2 each AL/CS4 each Economy Suite 45mm Frame Glazing Adaptor Glazing Bead 45mm End Cap 45mm Square Post Corner Stake to match AL/2846 Corner Stake (general) Corner Stake to match AL/8448 Copyright ALfit Pty Ltd, 2013. Surface Finish Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Mill Mill Mill Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 6 Code Length (mm) AL/64ST 3300 AL/64SLT 3300 AL/64GT 3300 Glazing Mating Track AL/64GMT 3300 Glazing Sill Track AL/64GST 3300 Glazing Mating Sill AL/64GMS 3300 64mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead AL/64GB 3300 Doorstop 45mm AL/64DS45 3300 Doorstop 35mm AL/64DS35 3300 Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 7 Code Length (mm) Glazing Floor Sill Track AL/64GFST 3300 Glazing Floor Sill Bead AL/64GFSB 3300 AL/64FF 3300 AL/64SS 3300 AL/64CB 3300 Shadowline Casing Bead AL/64SLCB 3300 6mm Villa Board Adaptor AL/VBA 3300 AL/PBA 3300 64mm Suite Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 8 Code Length (mm) AL/64ST 6600 AL/64SLT 6600 AL/64GT 6600 Glazing Mating Track AL/64GMT 6600 Glazing Sill Track AL/64GST 6600 Glazing Mating Sill AL/64GMS 6600 64mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead AL/64GB 6600 Doorstop 45mm AL/64DS45 6600 Doorstop 35mm AL/64DS35 6600 Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 9 Code Length (mm) Glazing Floor Sill Track AL/64GFST 6600 Glazing Floor Sill Bead AL/64GFSB 6600 AL/64FF 6600 AL/64SS 6600 AL/64CB 6600 Shadowline Casing Bead AL/64SLCB 6600 6mm Villa Board Adaptor AL/VBA 6600 AL/PBA 6600 64mm Suite Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor 50mm Mullion Extention Adaptor 2150 Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated AL/64MEA50 2750 Copyright ALfit Pty Ltd, 2013. Surface Finish Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 10 Code Length (mm) Front Glazed Track AL/64FGT 2800 Front Glazed Sill Track AL/64FGST 2800 Front Glazed Mullion AL/64FGM 2800 Front Dbl Glazed Track AL/64FDGT 2800 Front Glazed Standard Track AL/64FST 2800 Front Dbl Glazed Mullion AL/64FDGM 2800 AL/64FMMF 2800 AL/64FMMM 2800 Front Glazed Bead AL/64FGB 3600 Front Dbl Glazed Bead AL/64FDGB 2800 Flush Door Stop 35mm AL/64FDS35 6400 Flush Door Stop 45mm AL/64FDS45 6400 64mm Front Glazed Suite Front Glazed Mating Mullion (Female) Front Glazed Mating Mullion (Male) Copyright ALfit Pty Ltd, 2013. Surface Finish Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Anodised Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 11 Code Length (mm) AL/10/64ST 3300 AL/10/64SLT 3300 AL/10/64GT 3300 Glazing Mating Track AL/10/64GMT 3300 Glazing Sill Track AL/10/64GST 3300 Glazing Mating Sill AL/10/64GMS 3300 AL/64GB 3300 Doorstop 45mm AL/64DS45 3300 Doorstop 35mm AL/64DS35 3300 AL/64FF 3300 10/64mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead Flush Filler Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 12 Code Length (mm) AL/10/64ST 6600 AL/10/64SLT 6600 AL/10/64GT 6600 Glazing Mating Track AL/10/64GMT 6600 Glazing Sill Track AL/10/64GST 6600 Glazing Mating Sill AL/10/64GMS 6600 AL/64GB 6600 Doorstop 45mm AL/64DS45 6600 Doorstop 35mm AL/64DS35 6600 AL/64FF 6600 10/64mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead Flush Filler Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 13 Code Length (mm) AL/76ST 3300 AL/76SLT 3300 AL/76GT 3300 Glazing Mating Track AL/76GMT 3300 Glazing Sill Track AL/76GST 3300 Glazing Mating Sill AL/76GMS 3300 AL/76GB 3300 Doorstop 45mm AL/76DS45 3300 Doorstop 35mm AL/76DS35 3300 AL/76FF 3300 AL/64SS 3300 AL/64CB 3300 Shadowline Casing Bead AL/64SLCB 3300 6mm Villa Board Adaptor AL/VBA 3300 AL/PBA 3300 76mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Product Catalogue 2013 Page 14 Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Code Length (mm) AL/76ST 6600 AL/76SLT 6600 AL/76GT 6600 Glazing Mating Track AL/76GMT 6600 Glazing Sill Track AL/76GST 6600 Glazing Mating Sill AL/76GMS 6600 AL/76GB 6600 Doorstop 45mm AL/76DS45 6600 Doorstop 35mm AL/76DS35 6600 AL/64FF 6600 AL/64SS 6600 AL/64CB 6600 Shadowline Casing Bead AL/64SLCB 6600 6mm Villa Board Adaptor AL/VBA 6600 AL/PBA 6600 76mm Suite Standard Track Shadowline Track Glazing Track Glazing Bead Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 15 Code Length (mm) AL/92ST 3300 AL/92GT 3300 Glazing Mating Track AL/92GMT 3300 Glazing Mating Sill AL/92GMS 3300 Glazing Sill Track AL/92GST 3300 AL/92GB 3300 Doorstop 45mm AL/92DS45 3300 Doorstop 35mm AL/92DS35 3300 AL/64FF 3300 AL/64SS 3300 AL/64CB 3300 Shadowline Casing Bead AL/64SLCB 3300 6mm Villa Board Adaptor AL/VBA 3300 AL/PBA 3300 92mm Suite Standard Track Glazing Track Glazing Bead Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 16 Code Length (mm) AL/92ST 6600 AL/92GT 6600 Glazing Mating Track AL/92GMT 6600 Glazing Mating Sill AL/92GMS 6600 Glazing Sill Track AL/92GST 6600 AL/92GB 6600 Doorstop 45mm AL/92DS45 6600 Doorstop 35mm AL/92DS35 6600 AL/64FF 6600 AL/64SS 6600 AL/64CB 6600 Shadowline Casing Bead AL/64SLCB 6600 6mm Villa Board Adaptor AL/VBA 6600 AL/PBA 6600 92mm Suite Standard Track Glazing Track Glazing Bead Flush Filler Split Starter Casing Bead 10mm Plasterboard Adaptor Copyright ALfit Pty Ltd, 2013. Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 17 Size (mm) (Height Channels Th H L Code x Width x Thickness) Length (mm) AL/C1212 12 x 12 x 1.6 6500 AL/C2020 20 x 20 x 1.6 6500 AL/C2525 25 x 25 x 3.0 6500 Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated W Hinges Code Size (mm) Aluminium Door Hinge AL/ADH 102 x 48 x 2.5 Timber Door Hinge AL/TDH 102 x 48 x 2.5 Lift-off Hinge AL/LDH 102 x 48 x 2.5 Thresholds Code Length (mm) Wheelchair Thresholds AL/WTC 6500 Disabled Thresholds AL/DTC 6500 Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 18 Flat Bar Code Size (WxT) (mm) Length (mm) AL/FB3 20 x 3.0 4000 AL/FB25 25 x 3.0 4000 AL/FB32 32 x 3.0 4000 AL/FB40 40 x 3.0 4000 AL/FB50 50 x 3.0 4000 AL/FB100 100 x 3.0 4000 AL/FB1006 100 x 6.0 4000 AL/FB1606 160 x 6.0 4000 Surface Finish Th Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated L W Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 19 Angles Code Size (mm) (Height x AL/A1212 12 x 12 x 1.6 6500 AL/A2012 20 x 12 x 1.6 6500 AL/A2020 20 x 20 x 1.6 6500 AL/A2512 25 x 12 x 1.6 6500 AL/A2520 25 x 20 x 1.6 6500 AL/A2525 25 x 25 x 1.6 6500 AL/A3220 32 x 20 x 1.6 6500 AL/A4020 40 x 20 x 1.6 6500 AL/A4040 40 x 40 x 1.6 6500 AL/A403 40 x 40 x 3.0 6500 AL/A5025 50 x 25 x 1.6 6500 AL/A5050 50 x 50 x 1.6 6500 AL/A7025M 70 x 25 x 1.6 6500 AL/A8020 80 x 20 x 3.0 6500 AL/A10050AL 100 x 50 x 3.0 6500 AL/A125M 125 x 50 x 3.0 6500 Width x Thickness) Th H W L Copyright ALfit Pty Ltd, 2013. Surface Finish Length (mm) Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 20 Door Frame Kits Code Size (H x W) (mm) AL/64DF21 2100 x 927 AL/64DF27 2700 x 927 AL/10/64DF21 2100 x 927 AL/10/64DF27 2700 x 927 AL/76DF21 2100 x 927 AL/76DF27 2700 x 927 AL/92DF21 2100 x 927 AL/92DF27 2700 x 927 Surface Finish Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated 64 Series 10/64 Series 76 Series 92 Series Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 21 Double Door Frame Kits Code Size (H x W) (mm) AL/64DDF21 2100 x 1650 AL/64DDF27 2700 x 1650 AL/10/64DDF21 2100 x 1650 AL/10/64DDF27 2700 x 1650 AL/76DDF21 2100 x 1650 AL/76DDF27 2700 x 1650 AL/92DDF21 2100 x 1650 AL/92DDF27 2700 x 1650 Surface Finish Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated 64 Series 10/64 Series 76 Series 92 Series Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 22 Highlight Door Kits 64 Series 10/64 Series 76 Series 92 Series Copyright ALfit Pty Ltd, 2013. Code Size (H x W) (mm) AL/64HDF27 2750 x 927 AL/10/64HDF27 2750 x 927 AL/76HDF27 2750 x 927 AL/92HDF27 2750 x 927 Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 23 Adjustable Door Kits 35mm Door Kit Adjustable Dbl Door Kits 35mm Double Door Kit Copyright ALfit Pty Ltd, 2013. Code Size (H x W) (mm) AL/ADK2135/6595 2150 x 927 AL/ADK2135/95131 2150 x 927 AL/ADK2735/6595 2750 x 927 AL/ADK2735/95131 2750 x 927 Code Size (H x W) (mm) AL/ADDK2135/6595 2150 x 1650 AL/ADDK2135/95131 2150 x 1650 AL/ADDK2735/6595 2750 x 1650 AL/ADDK2735/95131 2750 x 1650 Surface Finish Anodised Powdercoated Anodised Powdercoated Anodised Powdercoated Anodised Powdercoated Surface Finish Anodised Powdercoated Anodised Powdercoated Anodised Powdercoated Anodised Powdercoated Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 24 Lift-off Door Kits 64 Series Code Size (H x W) (mm) AL/64LDFK2135 2150 x 927 AL/64LDFK2735 2750 x 927 AL/10/64LDFK2135 2150 x 927 AL/10/64LDFK2735 2750 x 927 AL/76LDFK2135 2150 x 927 AL/76LDFK2735 2750 x 927 AL/92LDFK2135 2150 x 927 AL/92LDFK2735 2750 x 927 Surface Finish Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated Mill Anodised Powdercoated MIll Anodised Powdercoated 10/64 Series 76 Series 92 Series Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 25 Aluminium Glass Doors 35mm Aluminium Door Frame with Lock 35mm Aluminium Door Frame with Lock 35mm Aluminium Door without Lock 35mm Aluminium Door without Lock Code Size (H x W) (mm) AL/AGD2135WL 2040 x 920 AL/AGD2735WL 2660 x 920 AL/AGD2135 2040 x 920 AL/AGD2735 2660 x 920 Surface Finish Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated Mill Anodised Powdercoated NB: Surface Mounted Hydraulic Door Closes are not included, but are available separately from our Hardware Pricelist ` Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 26 64 Series Glazing Frame Kits Code AL/64GF(Height)(Width)(Finish) Size (H x W) (mm) 900 900 1200 1800 2100 2700 3600 1200 1800 2700 3600 AL/64GF99M = 900x900 Mill Finish AL/64GF1212CA = 1200x1200 Anodised Finish AL/64GF2736P = 2700x3600 Powdercoat Finish 10/64 Series Glazing Frame Kits Code AL/10/64GF(Height)(Width)(Finish) Size (H x W) (mm) 900 900 1200 1800 2100 2700 3600 1200 1800 2700 3600 AL/10/64GF99M = 900x900 Mill Finish AL/10/64GF1212CA = 1200x1200 Anodised Finish AL/10/64GF2736P = 2700x3600 Powdercoat Finish 76 Series Glazing Frame Kits Code AL/76GF(Height)(Width)(Finish) Size (H x W) (mm) 900 900 1200 1800 2100 2700 3600 1200 1800 2700 3600 AL/76GF99M = 900x900 Mill Finish AL/76GF1212CA = 1200x1200 Anodised Finish AL/76GF2736P = 2700x3600 Powdercoat Finish 92 Series Glazing Frame Kits Code AL/92GF(Height)(Width)(Finish) Size (H x W) (mm) 900 900 1200 1800 2100 2700 3600 Copyright ALfit Pty Ltd, 2013. 1200 1800 2700 3600 AL/92GF99M = 900x900 Mill Finish AL/92GF1212CA = 1200x1200 Anodised Finish AL/92GF2736P = 2700x3600 Powdercoat Finish Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 27 Return Air Grilles Code Size (HxWxT)(mm) AL/RAG150 600mm x 150mm AL/RAG200 600mm x 200mm AL/RAG250 600mm x 250mm AL/RAG300 600mm x 300mm AL/RAG400 600mm x 400mm AL/RAG450 600mm x 450mm AL/RAG600 600mm x 600mm Code Length (m) Polybond Black 35/45mm Door AL/MB350 350 Polybond Grey 35/45mm Door AL/MG350 350 Polybond Black 40mm Door AL/MB200 200 Code Size AL/ARB Per Block Mohair Anodising Rubber Copyright ALfit Pty Ltd, 2013. Price per unit (excluding GST) Price per block (excluding GST) Terms of Trade available at http://site.alfit.com.au/terms-of-trade Ph : 07 3375 3555 Fax : 07 3375 5611 Mobile: 04999 888 00 Email: [email protected] Product Catalogue 2013 Page 28 Screws Code Size Qty per Box Flat Top AL/FT1016 10mm x 16mm 1000 SDM Bugle AL/B1825 6-18mm x 25mm 1000 SDM Button AL/BT1825 8-18mm x 25mm 1000 Drywall Screw AL/DS1825 8-18mm x 25mm 1000 Drywall Screw AL/DS1840 6-18mm x 40mm 1000 AL/PHNP620 6 Gage 20MM Skirting 1000 Transome Screws AL/PPS834 19mm 1 Hinge Screw (Timber) AL/SC8114 32mm 1 Hinge Screw (Aluminium) AL/SC834 19mm 1 Pan Head Self Tapping Copyright ALfit Pty Ltd, 2013. Terms of Trade available at http://site.alfit.com.au/terms-of-trade