PRODUCTS DIRECTORY SIDING

Transcription

PRODUCTS DIRECTORY SIDING
SIDING
PRODUCTS
DIRECTORY
Vinyl • Aluminum • Steel
1001 Corporate Drive
Burlington, Ontario L7L 5V5
www.gentek.ca
Make us a part of your home.
www.gentek.ca
Effective Date: January 1, 2014.
Due to product changes, improvements and other factors, Gentek reserves the right to
change or delete information contained herein without prior notice. Check Gentek’s
website at www.gentek.ca for the most up to date product specifications.
888-1111E
© 2014, Gentek Building Products
Printed in Canada. Please recycle. C
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
GENTEK PRODUCT DIRECTORY
4
5-8
INSULATED VINYL SIDING
PRODIGY®
PRODIGY® WIDE POCKET ACCESSORIES
9-10
11-12
13-14
15-17
18-19
20-21
22-23
24
VINYL SIDING
SEQUOIA SELECT®
NORTHERN FOREST® ELITE
BOARD & BATTEN
FAIR OAKS®
ADVANTAGE® III & BERKSHIRETM BEADED
CONCORD®
DRIFTWOOD®
SELECTION
25
26
27-28
29
30
VINYL SOFFIT
SEQUOIA SELECT® Ultra-Premium Soffit
BEADED Premium Soffit
OXFORD® Premium Soffit
FAIRWEATHER® Soffit
Vinyl Soffit Architectural Specifications
31-37
38-39
VINYL SIDING ACCESSORIES
Vinyl Accessories
Variegated Accessories
40-41
DECORATIVE VINYL TRIM
TRIM ESSENTIALS®
42
43-44
44
ALUMINUM SIDING
DELUXE SMOOTH
WOODGRAIN 2000
CEDARWOOD®
45-48
49-50
51-52
53-54
55-56
57
ALUMINUM ACCESSORIES
Aluminum Accessories
Aluminum Soffits
Aluminum Fascia
Aluminum Flat Stock
Aluminum Gutter Coil
Aluminum Architectural Specifications
58
59
60
61
62-63
64-65
66-67
68
69-73
STEEL SIDING
STEELSIDE®
UNIVERSALTM
Steel Siding Accessories
Steel Siding Architectural Specifications
COLOUR MATRIX
Vinyl Accessories Colour Matrix
Aluminum Accessories Colour Matrix
Aluminum Products Colour Matrix (Soffit, Fascia, Coil)
Steel Accessories Colour Matrix
Colour Palette
IMPORTANT NOTES:
• For metric, unless indicated otherwise, all measurements are in millimetre (mm).
• Not all products and colours available at all locations.
Please check with your local Gentek branch for product availability.
Prodigy
®
INSULATED VINYL SIDING
Prodigy
®
WIDE POCKET ACCESSORIES
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
K015614
Double 6"
Double “ exposure
16' 8" panel length
3/4" butt height
Insulated siding with 1 1/2"
overall panel thickness
Stack lock design
Rollover nail hem
Subtle cedargrain texture
Low-gloss finish
0.046" nom. thickness
Packaging:
1 square/carton
6 panels per carton
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Juniper Ridge - 633
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
K105803
3 1/2" Lineal
Double 5" exposure
16'8" panel length
3/4" butt height
Insulated siding with 1 1/2"
overall panel thickness
Stack lock design
Rollover nail hem
Subtle cedargrain texture
Low-gloss finish
0.046" nom.thickness
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Juniper Ridge - 633
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
K015514
Double 5"
Packaging:
1 square/carton
7 panels per carton
K015714
Single 7"
Single 7" exposure
16'8" panel length
3/4" butt height
Insulated siding with 1 1/2"
overall panel thickness
Stack lock design
Rollover nail hem
Subtle cedargrain texture
Low-gloss finish
0.046" nom.thickness
Packaging:
1 square/carton
10 panels per carton
Adobe Cream - 17
Antique Parchment - V7
Cape Cod Gray - V3
Coastal Sage - 28
Colonial Ivory - X3
Glacier White - V1
Juniper Ridge - 633
Maple - 649
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Tuscan Clay - 3C
Vintage Wicker - 3A
4
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
3 1/2" lineal with foam insert
20' length
1 1/2" receiving channel
1 3/4" pocket depth
Matte texture
Low-gloss finish
Packaging:
320' per carton
16 pieces per carton
Use standard finish trim as starter.
Note: Use with 3" beaded corner starter
(10-5818) to create outside corner post.
K105806
5" Lineal
5" lineal with foam insert
20' length
1 1/2" receiving channel
1 3/4" pocket depth
Matte texture
Low-gloss finish
COLOURS
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
Glacier White - V1
Packaging:
200' per carton
10 pieces per carton
Use standard finish trim as starter.
Note: Use with 3" beaded corner starter
(10-5818) to create outside corner post.
K105807
7" Lineal
7" lineal with foam insert
20' length
1 1/2" receiving channel
1 3/4" pocket depth
Matte texture
Low-gloss finish
Glacier White - V1
Packaging:
160' per carton
8 pieces per carton
Use standard finish trim as starter.
Note: Use with 3" beaded corner starter
(10-5818) to create outside corner post.
5
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Prodigy
®
WIDE POCKET ACCESSORIES
PRODUCT CODE & DESCRIPTION
COLOURS
3"quarter-round corner starter
K105818
3" Beaded Corner Starter 20' 0" length
Glacier White - V1
Matte texture
Low-gloss finish
Prodigy
K105055
WidePocket
Inside Corner Post
Note: Use with 3 1/2" (10-5803),
5" (10-5806) & 7" (10-5807) lineals to
create outside corner post.
4" outside corner post
with foam insert
12' 0" length
1 1/2" receiving channel
1" pocket depth
Matte texture
Low-gloss finish
Packaging:
120' per carton
10 pieces per carton
WIDE POCKET ACCESSORIES
PRODUCT CODE & DESCRIPTION
Packaging:
160' per carton
8 pieces per carton
K105612
Traditional OCP
®
Inside Corner Post
10' length
1 1/2" receiving channel
1 1/8" pocket depth
Matte texture
Low-gloss finish
Packaging:
100' per carton
10 pieces per carton
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
K105137
J-Channel - 1 1/2"
Packaging:
337.5' per carton
27 pieces per carton
K10-5154
Prodigy Starter
6
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
1 1/2"face
12' 6" length
Matte texture
Low-gloss finish
3" PVC Prodigy starter strip
12' 6" length
Packaging:
300' per carton
24 pieces per carton
COLOURS
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Tuscan Clay - 3C
Vintage Wicker - 3A
Neutral
7
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Prodigy
®
WIDE POCKET ACCESSORIES
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
K10-5505
2 Piece J Channel
Receiver Piece
Beige - 1
Cape Cod Gray - V3
Natural Linen - 55
Vintage Wicker - 3A
White - 3
64496
Double 4"
2 settings - creates both 1 1/4"
and 1 1/2" receiving channels
12' 6" length
Matte texture
Low-gloss finish
Packaging:
250' per carton
20 pieces per carton
Receiver
Piece
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 107.6 lb (48.8 kg)
Note:
Must order cover piece separately
64495
Double 4-1/2"
Dutch Lap
K10-5154
2 Piece J Channel
1 1/2" Cover Piece
1 1/2" J-channel cover
12' 6" length
Matte texture
Low-gloss finish
Packaging:
250' per carton
20 pieces per carton
Cover
Piece
Note:
Must order receiver piece separately
3/4" Butt (19)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.046" Nominal Thickness
Cedargrain Texture
Adobe Cream - 17
Antique Parchment - V7
Autumn Red - 88
Canyon Drift - 655
Cape Cod Gray - V3
Charcoal Smoke - 651
Coastal Sage - 28
Colonial Ivory - X3
Cream - 14
Deep Moss - 653
English Saddle - 656
Glacier White - V1
Juniper Grove - 633
Maple - 649
Midnight Blue - 652
Monterey Sand - 673
Mystic Blue - 3E
Natural Linen - 55
Platinum Gray - X2
Silver Moss - 96
Somerset Wheat - 654
Vintage Wicker - 3A
3/4" Butt (19)
2-4.5" Exposure per Panel
(114.5/229)
12' 1" Lengths (3683)
.046" Nominal Thickness
Cedargrain Texture
Packaging:
22 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 100.1 lb (45.4 kg)
64507
Double 5"
Dutch Lap
3/4" Butt (19)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.046" Nominal Thickness
Cedargrain Texture
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
*Coastal Blue - 625
*Dark Drift - 655
**Espresso - 636
*Harvest Wheat - 654
**Iron Ore - 642
*Midnight Surf - 652
*Moonlit Moss - 653
*Mountain Arbor - 630
*Rockwell Blue - 637
*Saddle Brown - 656
*Venetian Red - 688
*Windswept Smoke - 651
*Not available in
D5 Dutch in Alberta,
British Columbia
**Not available in D5
Dutch anywhere
in Canada
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 95.04 lb (43.11 kg)
64497
Double 5"
3/4" Butt (19)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.046" Nominal Thickness
Cedargrain Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 96.89 lb (43.95 kg)
8
COLOURS
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
9
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
VINYL SIDING
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.) .................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..................................................................................................50
Weight (lbs./sq.) D4.............................................................................................55 ± 3
Weight (lbs./sq.) D5D ..........................................................................................50 ± 3
Thickness (0.001 in.)
Cedargrain ...................................................................46 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual
surface or structural changes such as cracking, flaking or chipping caused by manufacturing
defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
PRODUCT CODE & DESCRIPTION
COLOURS
64401
Double 4"
Aspen - 646
Chestnut - 648
Earthen - 644
Maple - 649
Rainforest - 645
Willow - 647
3/4" Butt (19)
2-4" Exposure per Panel
(101.6/203.2)
12'6" Lengths (3810)
.046" Nominal Thickness
Cedargrain Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 105.03 lb (47.64 kg)
64402
Double 5"
3/4" Butt (19)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.046" Nominal Thickness
Cedargrain Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 97.31 lb (44.14 kg)
64400
Double 5"
Dutch Lap
3/4" Butt (19)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.046" Nominal Thickness
Cedargrain Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 96.67 lb (43.85 kg)
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
10
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
11
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.) .................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..........................................................less than or equal to 0.125
Weight (lbs./sq.) .................................................................................................42 ± 3
Thickness (0.001 in.)
Cedargrain ...................................................................46 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual surface
or structural changes such as cracking, flaking or chipping caused by manufacturing defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
64403/64397 (Variegated)
7" Exposure per Panel (178.5)
7" Board & Batten
Snow White - 01
10' Lengths (3048)
.050" Nominal Thickness
Light Roughsawn Texture
Packaging:
17 pcs. per ctn.
1 sq. per ctn. (9.2 m2)
Ship. wt: 49.67 lb (22.53 kg)
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Storm - 631
Wicker - 638
Aspen - 646
Chestnut - 648
Earthen - 644
Maple - 649
Rainforest - 645
Willow - 647
*Coastal Blue - 625
*Dark Drift - 655
*Espresso - 636
*Harvest Wheat - 654
*Iron Ore - 642
*Midnight Surf - 652
*Moonlit Moss - 653
*Mountain Arbor - 630
*Rockwell Blue - 637
*Saddle Brown - 656
*Venetian Red - 688
*Windswept Smoke - 651
*Not available in
Alberta and
British Columbia
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
12
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
13
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.) .................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..................................................................................................50
Weight (lbs./sq.) D4.............................................................................................55 ± 3
Weight (lbs./sq.) D5D ..........................................................................................50 ± 3
Thickness (0.001 in.)
Light Roughsawn.........................................................50 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual
surface or structural changes such as cracking, flaking or chipping caused by manufacturing
defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
64695
Double 4"
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
5/8" Butt (15.9)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.044" Nominal Thickness
Hardwood Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 95 lb (43.09 kg)
64696
Double 4"
Dutch Lap
5/8" Butt (15.9)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.044" Nominal Thickness
Hardwood Texture
Dark Drift - 655
Harvest Wheat - 654
Rockwell Blue - 637
Mountain Arbor - 630
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 95 lb (43.09 kg)
64697
Double 5"
5/8" Butt (15.9)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.044" Nominal Thickness
Hardwood Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 91.8 lb (41.64 kg)
64698
Double 5"
Dutch Lap
5/8" Butt (15.9)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.044" Nominal Thickness
Hardwood Texture
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Wicker - 638
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 91.8 lb (41.64 kg)
14
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
15
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
64740
8"
Maize - 02
Snow White - 01
5/8" Butt (15.9)
8" Exposure per Panel (203.2)
12' 6" Lengths (3810)
.044" Nominal Thickness
Hardwood Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 87.02 lb (39.47 kg)
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi) ................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.).................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..........................................................less than or equal to 0.125
Weight (lbs./sq.) D4.............................................................................................42 ± 3
Thickness (0.001 in.)
Hardwood ....................................................................44 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF)......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual
surface or structural changes such as cracking, flaking or chipping caused by manufacturing
defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona.
16
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
17
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
VINYL SIDING
PRODUCT CODE & DESCRIPTION
64420
Triple 3"
1/2" Butt (12.7)
3-3" Exposure per Panel
(76.2/229)
12' 1" Lengths (3683)
.042" Nominal Thickness
Brushed Texture
Packaging:
22 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 86.18 lb (39.09 kg)
COLOURS
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
63319
6-1/2" Beaded
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Wicker - 638
3/4" Butt (19)
6-1/2" Exposure per Panel (165.1)
12' 3 3/4" Lengths (3753)
.046" Nominal Thickness
Brushed Texture
Packaging:
30 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 104.43 lb (47.37 kg)
18
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.) .................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..........................................................less than or equal to 0.125
Weight (lbs./sq.) .................................................................................................42 ± 3
Thickness (0.001 in.)
Advantage III - Brushed Finish ....................................42 ± 2
Berkshire - Brushed Finish ..........................................46 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual
surface or structural changes such as cracking, flaking or chipping caused by manufacturing
defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
19
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
64686
Double 4"
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
1/2" Butt (12.7)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.042" Nominal Thickness
Light Roughsawn Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 86.93 lb (39.43 kg)
64621
Double 4"
Dutch Lap
1/2" Butt (12.7)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.042" Nominal Thickness
Light Roughsawn Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 84.46 lb (38.31 kg)
62317
Double 5"
5/8" Butt (15.9)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.042" Nominal Thickness
Light Roughsawn Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 83.33 lb (37.80 kg)
62215
Double 5"
Dutch Lap
1/2" Butt (12.7)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
.042" Nominal Thickness
Light Roughsawn Texture
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification ................................................................................................13354
Tensile Strength (psi) .............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.) .............................................................................................3.1
Deflection Temperature at 264 psi (ºF) ....................................................................163
Flammability-Horizontal
Burn Distance (in.) ...............................................less than 1
Burn Time (sec.) .................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) ........................................................................................................+ 0.125
Width (in.) ..........................................................................................................+ 0.062
Warp (per panel, in.) ..........................................................less than or equal to 0.125
Weight (lbs./sq.) .................................................................................................42 ± 3
Thickness (0.001 in.)
Light Roughsawn.........................................................42 ± 2
Heat Shrinkage (%) at 160ºF.....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF ......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours ................................................................None
Surface Distortion at 120ºF for white...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board.
CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and be free of any visual
surface or structural changes such as cracking, flaking or chipping caused by manufacturing
defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 78.86 lb (35.77 kg)
20
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
21
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ARCHITECTURAL
SPECIFICATIONS
VINYL SIDING
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
PRODUCT CODE & DESCRIPTION
COLOURS
62312
Double 4"
Almond - 632
Amber - 616
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
7/16" Butt (11.1)
2-4" Exposure per Panel
(101.6/203.2)
12' 6" Lengths (3810)
.040" Nominal Thickness
Driftwood Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 81.11 lb (36.79 kg)
62310
Double 4-1/2"
Dutch Lap
7/16" Butt (11.1)
2-4.5" Exposure per Panel
(114.5/229)
12' 1" Lengths (3683)
.040" Nominal Thickness
Driftwood Texture
Packaging:
22 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 78.73 lb (35.71 kg)
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification.................................................................................................13354
Tensile Strength (psi)..............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.)..............................................................................................3.1
Deflection Temperature at 264 psi (ºF).....................................................................163
Flammability-Horizontal
Burn Distance (in.)................................................less than 1
Burn Time (sec.)..................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) .........................................................................................................+ 0.125
Width (in.)...........................................................................................................+ 0.062
Warp (per panel, in.)...........................................................less than or equal to 0.125
Weight (nominal, lbs./sq.)....................................................................................42 ± 3
Thickness (0.001 in.)
Driftwood .....................................................................40 ± 2
Heat Shrinkage (%) at 160ºF .....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF.......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours.................................................................None
Surface Distortion at 120ºF for white ...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and
be free of any visual surface or structural changes such as cracking, flaking or chipping caused
by manufacturing defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard.
All Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
22
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
23
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
SEQUOIA SELECT® ULTRA-PREMIUM VINYL SOFFIT
SELECTION VINYL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
COLOURS
64266
D4 Dutch - 8”
Snow White - 01
64550
12" T-4
Solid Soffit/Vertical
Siding
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Wicker - 638
12" Exposure per Panel (304.8)
12'6” Lengths (3658)
.040" Nominal Thickness
Driftwood Texture
Packaging :
24 pcs. per ctn.
2 sqs. per ctn. (18.58 m2)
Ship. wt: 91.21 lb (41.37 kg)
64268
D5 Dutch - 10”
12" Exposure per Panel (304.8)
12' Lengths (3658)
.044" Nominal Thickness
Matte Texture
Packaging :
16 pcs. per ctn.
1.92 sqs. per ctn. (17.8 m2)
Ship. wt: 91.21 lb (41.37 kg)
Snow White - 01
12" Exposure per Panel (304.8)
12'6” Lengths (3658)
.040" Nominal Thickness
Driftwood Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.58 m2)
Ship. wt: 91.21 lb (41.37 kg)
24
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
64552
12" T-4
Soffit/Hidden Vent
12" Exposure per Panel (304.8)
12' Lengths (3658)
.044" Nominal Thickness
Matte Texture
10 sq. inches ventilation
per lineal foot
Packaging:
16 pcs. per ctn.
1.92 sqs. per ctn. (17.8 m2)
Ship. wt: 91.21 lb (41.37 kg)
25
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
BEADED PREMIUM VINYL SOFFIT
OXFORD® PREMIUM VINYL SOFFIT
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
64370
8"
Solid Soffit*
Canyon Clay - 10
Juniper Grove - 633
Linen - 12
Monterey Sand - 673
Pebble - 628
Sandalwood - 08
Snow White - 01
Wicker - 638
64751
10" D-5
Solid Soffit/Vertical
Siding
8" Exposure per Panel (203.2)
12' 6" Lengths (3810)
.042" Nominal Thickness
Matte Texture
Packaging:
12 pcs. per ctn.
1 sq. per ctn. (9.29 m2)
Ship. wt: 53.46 lb (24.25 kg)
10" Exposure per Panel (254)
10' Lengths (3048)
.042" Nominal Thickness
Light Roughsawn Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 84.50 lb (38.33 kg)
*Soffit Use Only
64375
8"
Vented Soffit
8" Exposure per Panel (203.2)
12' 6" Lengths (3810)
.042" Nominal Thickness
Matte Texture
2.4 sq. inches ventilation
per lineal foot
64755
10" D-5
Solid Soffit/Vertical
Siding
10" Exposure per Panel (254)
12' Lengths (3658)
.042" Nominal Thickness
Light Roughsawn Texture
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 84.02 lb (38.11 kg)
Packaging:
12 pcs. per ctn.
1 sq. per ctn. (9.29 m2)
Ship. wt: 53.46 lb (24.25 kg)
64754
10" D-5
Fully Vented Soffit
10" Exposure per Panel (254)
12' Lengths (3658)
.042" Nominal Thickness
Light Roughsawn Texture
5.3 sq. inches ventilation
per lineal foot
Packaging:
20 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 84.02 lb (38.11 kg)
64885
EZ Lock
8” Solid
8" Exposure per Panel (254)
12'6” Lengths (3810)
.041" Nominal Thickness
Light Roughsawn Texture
COLOURS
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Storm - 631
Wicker - 638
Snow White -01
Linen - 12
Wicker - 638
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 94.23 lb (42.74 kg)
26
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
* Available in Bright White only and
has a 25 box minimum to order.
27
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
FAIRWEATHER®
OXFORD® PREMIUM VINYL SOFFIT
VINYL SOFFIT
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
COLOURS
64880
EZ Lock
8” Vented
Linen - 12
Snow White - 01
Wicker - 638
64456
12" T-4
Solid Soffit/Vertical
Siding
Almond - 632
Antique Ivory - 635
Canyon Clay - 10
Dover Gray - 127
Juniper Grove - 633
Linen - 12
Maize - 02
Monterey Sand - 673
Pearl - 06
Pebble - 628
Sage - 624
Sandalwood - 08
Sandstone - 640
Snow White - 01
Wicker - 638
10" Exposure per Panel (254)
12'6” Lengths (3810)
.041" Nominal Thickness
Light Roughsawn Texture
5.3 sq. inches ventilation
per lineal foot
12" Exposure per Panel (304.8)
12' Lengths (3658)
.040" Nominal Thickness
Brushed Texture
Packaging:
16 pcs. per ctn.
1.92 sqs. per ctn. (17.8 m2)
Ship. wt: 74.23 lb (33.67 kg)
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.6 m2)
Ship. wt: 94.23 lb (42.74 kg)
64460
12" T-4
Center Vented Soffit
12" Exposure per Panel (304.8)
12' Lengths (3658)
.040" Nominal Thickness
Brushed Texture
2.3 sq. inches ventilation
per lineal foot
Packaging:
16 pcs. per ctn.
1.92 sqs. per ctn. (17.8 m2)
Ship. wt: 74.83 lb (33.94 kg)
64458
12" T-4
Fully Vented Soffit
12" Exposure per Panel (304.8)
12' Lengths (3658)
.040" Nominal Thickness
Brushed Texture
7.1 sq. inches ventilation
per lineal foot
Packaging:
16 pcs. per ctn.
1.92 sqs. per ctn. (17.8 m2)
Ship. wt: 76.76 lb (33.91 kg)
28
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
29
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
VINYL SOFFIT
ARCHITECTURAL
SPECIFICATIONS
Gentek solid vinyl siding is made to exacting requirements using Gentek’s
exclusive Polyvinyl chloride (PVC) powder compound.
MATERIAL SPECIFICATIONS
Gentek’s polyvinyl chloride (PVC) compound meets or exceeds all specifications as
set forth in ASTM D-1784 compound requirements.
Cell Classification.................................................................................................13354
Tensile Strength (psi)..............................................................................................6660
Modulus of Elasticity (psi).................................................................................410,000
Izod Impact (ft. lbs./in.)..............................................................................................3.1
Deflection Temperature at 264 psi (ºF).....................................................................163
Flammability-Horizontal
Burn Distance (in.)................................................less than 1
Burn Time (sec.)..................................................less than 10
MANUFACTURING AND PRODUCT SPECIFICATIONS
Length (in.) .........................................................................................................+ 0.125
Width (in.)...........................................................................................................+ 0.062
Warp (per panel, in.)...................................................................................................50
Weight (lbs./sq.) D4 .............................................................................................55 ± 3
Weight (lbs./sq.) D5D...........................................................................................50 ± 3
Thickness (0.001 in.)
Fairweather..................................................................40 ± 2
Oxford...........................................................................42 ± 2
Beaded .........................................................................43 ± 2
Sequoia Select ............................................................44 ± 2
Heat Shrinkage (%) at 160ºF .....................................................less than or equal to 3
Coefficient of Linear Expansion (in./in ºF) ......................................................3.5 x 10-5
Gardner Impact (embossed, (in. lb.) at 76ºF.......................greater than or equal to 80
Gardner Impact (in. lb.) at 32ºF .........................................greater than or equal to 60
Surface Distortion at 130ºF for colours.................................................................None
Surface Distortion at 120ºF for white ...................................................................None
Gloss ..................................................................................................................Uniform
Flame Spread Classification CAN/ULC S102.2 .........................................................18
(In comparison with red oak at 100 and asbestos-cement board at 0)
WEATHERING: Per American Standards Testing Methods (ASTM) D-1435 and Canadian
General Standards Board. CAN-CGSB-41.24-95. The siding shall maintain a uniform colour and
be free of
any visual surface or structural changes such as cracking, flaking or chipping caused by
manufacturing defect.
COLOUR: Spectrophotometer controlled, ensuring uniformity and consistency.
COMPLIANCE: All materials, procedures, operations and product specifications shall meet or
exceed CGSB-41.24-95, ASTM D-3679, NBC 1995, Subsection 9.27.13 and Gentek Quality
Assurance Standard Procedures.
STANDARDS: Gentek products shall be listed under CCMC Evaluation Report Number 06541-L.
Gentek Vinyl siding shall be designed for use without a drop-in insulation backerboard. All
Gentek’s Vinyl siding materials will be covered by Gentek’s Limited Warranty.
ACCESSORIES VINYL
PRODUCT CODE & DESCRIPTION
COLOURS
65504 / 65524 Dark Colours
3 1/2" Face (88.9)
3-1/2" Outside Corner
10' Lengths (3048)
Post
See Matrix On
Pages 64-65.
Brushed Texture
Packaging:
10 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 33.6 lb (15.24 kg)
65501
3" Outside Corner Post
3" Face (76.2)
10' Lengths (3048)
Brushed Texture
Packaging:
10 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 31.8 lb (14.42 kg)
65507
6" Designer Outside
Corner Post
6" Face (152.4)
20' Lengths (6096)
Brushed Texture
Packaging:
5 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 46.85 lb (21.25 kg)
TESTING: Radco Architectural Testing Intertek Testing Service
Everglades Testing Service, Miami, Florida
D-Set Laboratories, Phoenix, Arizona
30
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
31
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES VINYL
ACCESSORIES VINYL
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
COLOURS
65520 / 65521
Inside Corner Post
See Matrix On
Pages 64-65.
65540
1-1/8" J-Channel
See Matrix On
Pages 64-65.
10' Lengths (3048)
Brushed Texture
Packaging:
10 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 19.5 lb (8.86 kg)
65560
1/2" J-Channel
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 47.6 lb (21.6 kg)
65606
1-1/4" J-Channel
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 38.3 lb (17.40 kg)
65536
5/8" Premium
J-Channel
12' Lengths (3658)
Brushed Texture
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 49 lb (22 kg)
32
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
12' Lengths (3658)
Brushed Texture
Packaging:
30 pcs. per ctn.
432 lineal ft. per ctn. (131.7 m)
Ship. wt: 42 lb (19.05 kg)
65538
2-1/2" Wide Face
J-Channel
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 44.6 lb (20.25 kg)
65533
3/4" Premium
J-Channel
12' Lengths (3658)
Brushed Texture
12' Lengths (3658)
Brushed Texture
Packaging:
18 pcs. per ctn.
216 lineal ft. per ctn. (65.8 m)
Ship. wt: 37.7 lb (17.10 kg)
65570 / 65571
Undersill Trim
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 32.6 lb (14.77 kg)
33
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES VINYL
ACCESSORIES VINYL
PRODUCT CODE & DESCRIPTION
COLOURS
67750
Double Undersill Trim
See Matrix On
Pages 64-65.
65581
Drip Cap
PRODUCT CODE & DESCRIPTION
65700
Surround Starter
See Matrix On
Pages 64-65.
12' Lengths (3658)
Smooth Texture
12' Lengths (3658)
Packaging:
25 pcs. per ctn.
300 lineal ft. per ctn. (91.5 m)
Ship. wt: 36 lb (16.33 kg)
Packaging:
25 pcs. per ctn.
300 lineal ft. per ctn. (91.4 m)
Ship. wt: 26.5 lb (12.02 kg)
65551
Deluxe Starter Strip*
COLOURS
12' Lengths (3658)
Brushed Texture
12' Lengths (3658)
Packaging:
45 pcs. per ctn.
540 lineal ft. per ctn. (164.6 m)
Ship. wt: 56 lb (25.41 kg)
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 54.6 lb (24.8 kg)
*For Sequoia Select and Northern Forest
Elite vinyl siding, use Universal Starter
Strip (code 2328) located on page 45.
65590
Beltline Trim
65599
F-Channel
12' Lengths (3658)
Brushed Texture
12' Lengths (3658)
Brushed Texture
Packaging:
30 pcs. per ctn.
360 lineal ft. per ctn. (109.7 m)
Ship. wt: 36.8 lb (16.69 kg)
Packaging:
24 pcs. per ctn.
288 lineal ft. per ctn. (87.8 m)
Ship. wt: 33.3 lb (15.12 kg)
34
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
35
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES VINYL
PRODUCT CODE & DESCRIPTION
68080
3/4" F-Channel
65568
3/8" Soffit Cove
J-Channel
ACCESSORIES VINYL
COLOURS
See Matrix On
Pages 64-65.
65579
Soffit Cove Moulding
12' Lengths (3658)
Brushed Texture
Packaging:
32 pcs. per ctn.
400 lineal ft. per ctn. (122 m)
Ship. wt: 55 lb (24.29 kg)
Packaging:
16 pcs. per ctn.
192 lineal ft. per ctn. (15.52 m)
Ship. wt: 22.6 lb (10.28 kg)
12'6" Lengths (3810)
Matte Texture
65578
Soffit Crown Moulding
COLOURS
See Matrix On
Pages 64-65.
12'6" Lengths (3810)
Brushed Texture
Packaging:
24 pcs. per ctn.
300 lineal ft. per ctn. (91.5 m)
Ship. wt: 34.1 lb (15.47 kg)
65548
Soffit Double Channel
PRODUCT CODE & DESCRIPTION
12' Lengths (3658)
Brushed Texture
Packaging:
18 pcs. per ctn.
216 lineal ft. per ctn. (65.9 m)
Ship. wt: 34.14 lb (15.49 kg)
12' Lengths (3658)
Brushed Texture
Packaging:
20 pcs. per ctn.
240 lineal ft. per ctn. (73.2 m)
Ship. wt: 43.5 lb (19.72 kg)
36
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
37
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES VINYL - VARIEGATED
PRODUCT CODE & DESCRIPTION
65516
Variegated
3-1/2" Outside Corner
Post
3 1/2" Face (88.9)
10' Lengths (3048)
Brushed Texture
ACCESSORIES VINYL - VARIEGATED
COLOURS
See Matrix On
Pages 64-65.
PRODUCT CODE & DESCRIPTION
65559
Variegated
Drip Cap
Packaging:
10 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 33.7 lb (15.29 kg)
65566
Variegated
1/2" J-Channel
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 37.9 lb (17.20 kg)
65532
Variegated
3/4" J-Channel
COLOURS
See Matrix On
Pages 64-65.
12' Lengths (3658)
Brushed Texture
Packaging:
45 pcs. per ctn.
540 lineal ft. per ctn. (164.6 m)
Ship. wt: 59 lb (27 kg)
65595
Variegated
Beltline Trim
12' Lengths (3658)
Brushed Texture
Packaging:
30 pcs. per ctn.
360 lineal ft. per ctn. (109.7 m)
Ship. wt: 42.3 lb (19.19 kg)
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 46.9 lb (21.31 kg)
65575
Variegated
Undersill Trim
12' Lengths (3658)
Brushed Texture
Packaging:
40 pcs. per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship. wt: 32.7 lb (14.85 kg)
38
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
39
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
VINYL DECORATIVE TRIM
VINYL DECORATIVE TRIM
PRODUCT CODE & DESCRIPTION
COLOURS
PRODUCT CODE & DESCRIPTION
COLOURS
65583
3-1/2" Window/Door
Surround
See Matrix On
Pages 64-65.
68030
Bay/Bow
Outside Corner Post
See Matrix On
Pages 64-65.
3 1/2" Face (88.9)
20' Lengths (6096)
Matte Texture
Packaging:
10 pcs. per ctn.
125 lineal ft. per ctn. (38 m)
Ship. wt: 23 lb (10.5 kg)
Packaging:
5 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship.wt: 23 lb (10.43 kg)
65750
5" Window/Door
Surround
5" Face (127)
20' Lengths (6096)
Matte Texture
Packaging:
5 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 26.6 lb (12.07 kg)
68035
3-1/2" H Trim
2" Face (50.8)
12' 6" Lengths (3810)
Matte Texture
68020
Beaded Corner
with Foam
20' Lengths (6096)
Matte Texture
Packaging:
5 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 84 lb (38 kg)
20’ Lengths
Smooth Finish
Packaging:
10 pcs. per ctn.
200’ per ctn. (61 m)
Ship. wt: 64.11 lb (29.08 kg)
40
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
41
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
DELUXE SMOOTH ALUMINUM SIDING
PRODUCT CODE & DESCRIPTION
WOODGRAIN 2000 ALUMINUM SIDING
COLOURS
1/2" Butt Height
8" Exposure per panel (203.2)
12' 6" Lengths (3810)
Smooth Texture
1002
8" Horizontal
203.2
(8")
1191
D4 Horizontal
203.2
(8")
Bright White - 431
PRODUCT CODE & DESCRIPTION
Packaging:
24 pcs. per ctn.
2 sqs. per ctn. (18.58 m2)
Ship.wt: 80.4 lbs (36.47 kg)
1/2" Butt Height
2-4" Exposure
per Panel
(101.6/203.2)
12' 6" Lengths
(3810)
Smooth Texture
Packaging:
24 pcs. per ctn.
2 sqs. per ctn.
(18.58 m2)
Ship. wt: 65.39
lbs (29.66 kg)
Almond - 532
Antique Ivory - 533
Black - 525
Bright White - 431
Burgundy - 567
Canyon Clay - 510
Cashmere - 514
Chestnut Brown - 554
Commercial Brown - 562
Dark Drift - 557
Dover Gray - 536
Forest Green - 556
Harvest Wheat - 543
Ivy Green - 522
1/2" Butt Height
8" Exposure per Panel
12' 6" Lengths (3810)
Woodgrain Texture
1003
8" Horizontal
203.2
(8")
Maize - 502
Midnight Surf - 509
Moonlit Moss - 513
Old World Blue - 542
Pebble - 559
Sable - 547
Saddle Brown - 569
Sandalwood - 508
Sandstone - 540
Slate - 523
Tan - 507
Wedgewood Blue - 535
Wicker - 538
Windswept Smoke - 506
203.2
(8")
1/2" Butt Height
8" Exposure per Panel
10' Lengths (3048)
Smooth Texture
1302
8" Vertical
Board & Batten
203.2
(8")
50.8
(2")
Packaging:
15 pcs. per ctn.
1 sq. per ctn. (9.29 m2)
Ship.wt: 38.6 lbs (17.55 kg)
Almond - 532
Bright White - 431
Canyon Clay - 510
Cashmere - 514
Chestnut Brown - 554
Maize - 502
Pebble - 559
Sandalwood - 508
Sandstone - 540
Wicker - 538
203.2
(8")
1303
8" Vertical
Board & Batten
1438
Vertical “V”
184.2
(7-1/4")
90.5
(3-9/16")
1/2" Butt Height
7 1/4" Exposure per panel
9'-7 3/8" Lengths (2930)
Smooth Texture
90.5
(3-9/16")
Packaging:
17 pcs per ctn.
1 sq. per ctn. (9.29 m2)
Ship.wt: 30.95 lbs (14.04 kg)
Almond - 532
Antique Ivory - 533
Bright White - 431
Canyon Clay - 510
Dover Gray - 536
Sandalwood - 508
Sandstone - 540
Pebble - 559
Wicker - 538
42
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
203.2
(8")
50.8
(2")
Packaging:
24 pcs per ctn.
2 sqs. per ctn. (18.58 m2)
Ship.wt: 59.32 lbs (26.91 kg)
1/2" Butt Height
2-4" Exposure per Panel
12' 6" Lengths (3810)
Woodgrain Texture
1188
D4 Dutch Horizontal
Bright White - 431
Packaging:
24 pcs per ctn.
2 sqs. per ctn.(18.58 m2)
Ship. wt: 80.4 lbs (36.47 kg)
1/2" Butt Height
2-4" Exposure pre Panel
12' 6" Lengths (3810)
Woodgrain Texture
1192
D4 Horizontal
COLOURS
Packaging:
24 pcs per ctn.
2 sqs per ctn. (18.58 m2)
Ship. wt: 59.32 lbs (26.91 kg)
1/2" Butt Height
8" Exposure per panel
10' Lengths (3048)
Woodgrain Texture
Packaging:
15 pcs per ctn.
1 sq per ctn. (9.29 m2)
Ship wt: 38.69 lbs (17.55 kg)
Almond - 532
Antique Ivory - 533
Bright White - 431
Canyon Clay - 510
Dover Gray - 536
Sandalwood - 508
Sandstone - 540
Pebble - 559
Wicker - 538
Almond - 532
Antique Ivory - 533
Bright White - 431
Canyon Clay - 510
Dover Gray - 536
Pebble - 559
Sandalwood - 508
Sandstone - 540
Wicker - 538
Almond - 532
Bright White - 431
Canyon Clay - 510
Chestnut Brown - 554
Dover Gray - 536
Maize - 502
Pebble - 559
Sandalwood - 508
Sandstone - 540
Wicker - 538
43
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
WOODGRAIN 2000 ALUMINUM SIDING
PRODUCT CODE & DESCRIPTION
1/2" Butt Height
7 1/4" Exposure per Panel
9' 7 3/8" Lengths (2930)
Woodgrain Texture
1439
Vertical “V”
184.2
(7-1/4")
90.5
(3-9/16")
90.5
Packaging:
17 pcs per ctn.
1 sq per ctn. (9.2 m2)
Ship wt: 30.91 lbs (14.02 kg)
(3-9/16")
10' Lengths (3048)
Smooth Texture
2504
Undersill Trim
Woodgrain 2000
38.1
(1-1/2")
53.9
COLOURS
PRODUCT CODE & DESCRIPTION
Almond - 532
Antique Ivory - 533
Bright White - 431
Canyon Clay - 510
Dover Gray - 536
Pebble - 559
Sandalwood - 508
Sandstone - 540
Wicker - 538
2550
Snaplock Sill Trim
25.4
(1")
2311
Individual Corner Cap
Woodgrain 2000
227
(8-15/16")
38.1
10' Lengths (3100)
Smooth Texture
83.5
(2-1/2")
12' Lengths (3658)
Smooth Texture
2502
3/4” J Trim
8" Exposure (203.2)
Woodgrain Texture
Packaging:
40 pcs per ctn.
Ship wt: 22.9 lbs (10.39 kg)
26.9
(1-1/16")
(2-1/2")
19.1 (3/4")
ALUMINUM SIDING
PRODUCT CODE & DESCRIPTION
1207
Double 5”
12.7
(5")
254
(10")
12.7
(5")
44
19.1
(3/4")
Packaging:
50 pcs per ctn.
Ship wt: 47.40 lbs (21.50 kg)
Packaging:
100 pcs per ctn.
Ship wt: 13.0 lbs (5.90 kg)
63.5
Packaging:
40 pcs per ctn.
Ship wt: 22.2 lbs (10.08 kg)
2328
Universal Starter Strip
Packaging:
20 pcs per ctn.
Ship wt: 16.38 lbs (7.43 kg)
36.8
See Matrix On
Pages 66-67.
See Matrix On
Pages 66-67.
10' Lengths (3048)
Woodgrain Texture
((1-7/16")
12' Lengths (3658)
Smooth Texture
COLOURS
(1-1/2")
Packaging:
25 pcs per ctn.
Ship wt: 12.87 lbs (5.84 kg)
2043
Fascia Trim
Woodgrain 2000
(2-1/8")
ACCESSORIES ALUMINUM
1/2" Butt Height (12.7)
2-5" Exposure per Panel (127/254)
12’ Lengths (3658)
PVDF Finish (Kynar)
Woodgrain Texture
Variegated Colours
2319/2312
3/4” Outside
Corner Post
COLOURS
Aspen - 990
Chestnut Brown - 992
Maple Tan - 994
Tawny Oak - 996
Packaging:
20 pcs per ctn.
2 sqs. per ctn. (18.58 m2)
Ship wt: 89 lbs (40.5 kg)
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
63.5
(2-1/2")
19.0
(11/16")
10' Lengths (3048)
Smooth Texture
Packaging:
10 pcs per ctn.
Ship wt: 20.83 lbs (9.45 kg)
36.3
(1-7/16")
45
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES ALUMINUM
PRODUCT CODE & DESCRIPTION
10' Lengths (3048)
Smooth Texture
2503
Universal J
ACCESSORIES ALUMINUM
COLOURS
See Matrix On
Pages 66-67.
2300
Individual Corner Cap
Packaging:
20 pcs per ctn.
Ship wt: 11.73 lbs (5.32 kg)
34.9
227
(8-15/16")
8" Exposure (203.2)
Smooth Texture
COLOURS
See Matrix On
Pages 66-67.
Packaging:
100 pcs per carton
Ship wt: 13.0 lbs (5.90 kg)
63.5
(1-3/8")
(2-1/2")
31.1 (1-1/4")
2538
LTrim Small
12' Lengths (3048)
Smooth Texture
Packaging:
20 pcs per ctn.
Ship wt: 13.69 lbs (6.21 kg)
12' Lengths (3658)
Smooth Texture
Packaging:
25 pcs per ctn.
Ship wt: 16.11 lbs (7.31 kg)
(1-3/8")
28.6
(1-1/8")
12.7 (1/2")
12' Lengths (3658)
Smooth texture
2543
Drip Cap
2520
Soffit J Both Sides
Painted (BSP)
34.9
25.4
(1")
PRODUCT CODE & DESCRIPTION
1692
Channel Runner
Packaging:
25 pcs per ctn.
Ship wt: 14.33 lbs (6.50 kg)
Packaging:
20 pcs per ctn.
Ship wt: 15.23 lbs (6.91 kg)
50.8
12' Lengths (3658)
Smooth Texture
34.9
(2")
(1-3/8")
31.8
15.9 (5/8")
(1-1/4")
2567
Roof Edge Drip Cap
10' Lengths (3048)
Smooth Texture
Packaging:
20 pcs per ctn.
Ship wt: 12.72 lbs (5.77 kg)
25.4
(1")
63.5
(2-1/2")
46
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
47
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES ALUMINUM
PRODUCT CODE & DESCRIPTION
2317
Cedarwood®
Outside Corner Post
63.5
2-1/2” Face (63.5)
10' Lengths (3048)
PVDF Finish (Kynar)
Woodgrain Texture
Cedarwood® Colours
SOFFIT ALUMINUM
COLOURS
PRODUCT CODE & DESCRIPTION
See Matrix On
Pages 66-67.
1600/1607
Soffit 16" 2 Panel
Heavy Gauge
406.4
(16")
(2-1/2")
17.5
(11/16”)
Packaging:
10 pcs per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship wt: 25.5 lbs (11.6 kg)
36.5
(1-7/16")
1600 - Plain
406.4
(16")
16" Exposure per Panel (406)
12' 1 15/16" Lengths (3700)
Smooth Texture
4.02 sq inches ventilation per
lineal foot (26.0 m2)
COLOURS
See Matrix On
Pages 68-69.
Packaging:
12 pcs per ctn.
2 sqs. per carton (18 m2)
Ship. wt: 51.5 lbs (23.35 kg)
1607 - Vented
2318
Cedarwood®
3/4” J-Channel
12' Lengths (3658)
PVDF Finish (Kynar)
Smooth Texture
Cedarwood® Colours
Packaging:
40 pcs per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship wt: 29 lbs (13.2 kg)
25.4
(1")
1601/1606
Soffit 16" 4 Panel
Standard Gauge
406.4
(16")
1601 - Plain
406.4
(16")
19.1 (3/4")
2320
Cedarwood®
Snap-Lock Finish Trim
12.7
(1/2")
12' Lengths (3658)
PVDF Finish (Kynar)
Smooth Texture
Cedarwood® Colours
Packaging:
40 pcs per ctn.
480 lineal ft. per ctn. (146.3 m)
Ship wt: 28 lbs (12.76 kg)
31.8
(1-1/4")
1602/1603
Soffit 16" 2 Panel
Standard Gauge
406.4
(16")
406.4
(16")
1603 - Vented
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Packaging:
18 pcs per ctn.
4.12 sqs. per ctn (26.6 m2)
Ship. wt: 56.53 lbs (25.64 kg)
1606 - Vented
1602 - Plain
48
16" Exposure per Panel (406)
12' 2 3/8" Lengths (3700)
Smooth Texture
5.46 sq inches of ventilation per
lineal foot
(19.4 cm2)
16" Exposure
per Panel
12' 1 5/16" Lengths (3690)
Smooth Texture
4.02 sq inches
of ventilation per lineal foot
(26.0 cm2)
Packaging:
18 pcs per ctn.
3 sqs per ctn. (18 m2)
Ship wt: 56.13 lbs (25.46 kg)
49
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
SOFFIT ALUMINUM
PRODUCT CODE & DESCRIPTION
2330/2345
Soffit 18" 3 Panel
Heavy Guage
457.2
(18")
2330 - Plain
457.2
(18")
18" Exposure per panel (457.2)
10' Lengths (3040)
Smooth Texture
5.46 sq inches of ventilation
per lineal foot (32.2 cm2)
FASCIA ALUMINUM
COLOURS
PRODUCT CODE & DESCRIPTION
See Matrix On
Pages 68-69.
1694-Rib
4" Fascia
Standard Gauge
Packaging:
12 pcs per ctn.
1.92 sqs per carton (18 m2)
ship wt: 39.5 lbs. (17.94 kg)
2345 - Vented
101.6 (4")
1696-Rib
6" Fascia
Standard Gauge
152.4 (6")
1698-Rib
8" Fascia
Standard Gauge
203.2 (8")
50
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
9' 10" Lengths (3000)
Ribbed
COLOURS
See Matrix On
Pages 68-69.
Packaging:
30 pcs per ctn.
295 lineal ft per ctn (90 m)
Ship wt: 32.65 lbs (14.81 kg)
9' 10" Lengths (3000)
Ribbed
Packaging:
20 pcs per ctn.
197 lineal ft per ctn (60 m)
Ship wt: 29.32 lbs (13.30 kg)
9' 10" Lengths (3000)
Ribbed
Packaging:
20 pcs per ctn
197 lineal ft per ctn (60 m)
Ship wt: 37.59 lbs (17.05 kg)
51
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
FASCIA ALUMINUM
PRODUCT CODE & DESCRIPTION
2020 - Rib
6" Fascia
Heavy Gauge
152.4 (6")
2024 - No Rib
6" Fascia
Heavy Gauge
152.4 (6")
9' 10" Lengths (3000)
Ribbed
FLAT STOCK ALUMINUM
COLOURS
PRODUCT CODE & DESCRIPTION
See Matrix On
Pages 68-69.
3036
Flat Stock
24"x 50'(BSP)*
Packaging:20 pcs per ctn
197 lineal ft per ctn (60 m)
Ship wt: 36.4 lbs (16.53 kg)
50' Lengths (1524)
COLOURS
See Matrix On
Pages 68-69.
Packaging:
Ship wt: 28.12 lbs (12.75 kg)
Note:
Colour Over Bright White Light Gauge.
Reverse side is Bright White.
9' 10" Lengths (3000)
Plain
Packaging:
25 pcs per ctn
245.8 lineal ft per ctn (75 m)
Ship wt: 44.8 lbs (20.31 kg)
3037
Flat Stock
24"x 98' 1/2" (BSP)*
98' 1/2" Lengths (3000)
Packaging:
Ship wt: 55.34 lbs (25.10 kg)
Note:
Colour Over “Bright White Light Gauge.
Reverse side is Bright White
2030 - Rib
8" Fascia
Heavy Gauge
203.2 (8")
2025 - No Rib
8" Fascia
Heavy Gauge
203.2 (8")
9' 10" Lengths (3000)
Ribbed
See Matrix On
Pages 68-69.
Packaging:
20 pcs per ctn
197 lineal ft per ctn (60 m)
Ship wt: 46.8 lbs (21.22 kg)
9' 10" Lengths (3000)
Plain
Packaging:
25 pcs per ctn
245.8 lineal ft per ctn (75 m)
Ship wt: 57.4 lbs (26.07 kg)
52
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
53
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
FLAT STOCK ALUMINUM
PRODUCT CODE & DESCRIPTION
3304
Flat Stock 24"x 50'
(BSP)*
50' Lengths (15.24 m)
GUTTER COIL ALUMINUM
COLOURS
PRODUCT CODE & DESCRIPTION
See Matrix On
Pages 68-69.
3025
Gutter Coil 10 1/2"
(OSP)*
Packaging:
Ship wt: 23.55 lbs (10.68 kg)
Width per coil 10 1/2" (267)
COLOURS
See Matrix On
Pages 68-69.
Packaging:
Ship wt: 2.20 lbs (1 kg)
Note:
Colour Over Bright White Light Gauge.
Reverse side is Bright White
98' 1/2" Lengths (30 m)
3531
Flat Stock 24" x 98' 1/2 "
Packaging:
(BSP)*
Ship wt: 48 lbs (21.78 kg)
Note:
Colour Over Bright White Light Gauge.
Reverse side is Bright White
3311
PVC Striated Flat Stock
24" x 50' (OSP)*
50' Lengths (15.24 m)
Packaging:
Ship wt: 22.40 lbs (10.16 kg)
Note:
One Side Painted Light Gauge.
54
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
3006
Gutter Coil 11 7/8"
(OSP)*
Width per coil 11 7/8" (301.5)
Packaging:
Ship wt: 2.20 lbs (1 kg)
All Rainware Accessories Available in above Colours
*BSP - Both Sides Painted / *OSP - One Side Painted
55
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
GUTTER COIL ALUMINUM
PRODUCT CODE & DESCRIPTION
3009
Gutter Coil 11 7/8"
(BSP)*
Width per coil 11 7/8" (301.5)
ARCHITECTURAL
SPECIFICATIONS
ALUMINUM
COLOURS
See Matrix On
Pages 68-69.
Packaging:
Ship wt: 2.20 lbs (1.00 kg)
ALUMINUM METAL PROPERTIES
Alloy or equivalent........................................................................................AA3000
Specific Gravity...................................................................................................2.72
Modulus of Elasticity (ksi) ..............................................................................10,000
Melting Range (°F)....................................................................................1175-1210
COATING PROPERTIES: Gentek Aluminum products are manufactured with AA3000 series
alloy (or equivalent). Both sides of the aluminum are cleaned with a specially formulated
cleaner. The cleaned aluminum is then treated with an acid solution containing chrome to
enhance corrosion resistance and coating adhesion.
The topside of the pretreated aluminum is coated with a thermoset polyester polymer which
is dried and cured at about 440 deg F., forming a hard but flexible and weatherable coating.
Total coating thickness is approximately 18 micrometers.
3012
Gutter Coil 13 1/2"
(BSP)*
Width per coil 13 1/2" (343)
Packaging:
Ship wt: 2.20 lbs (1.00 kg)
WEATHERING AND TESTING: Gentek products are tested for superior adhesion and forming
properties. Gentek’s stringent colour specifications allow batch to batch mixing of product.
Product testing includes colour, film thickness, gloss, hot water/impact test, freezer/impact
test, salt spray, humidity testing (1000 hrs.) and outdoor exposure (2 years).
COMPLIANCE: All Gentek Soffits comply with CAN/CGSB-93.2-M91.
WARRANTY: 40 Year Limited Warranty. Warranty is transferable.
3084
Gutter Coil 6" (BSP)*
Width per coil 6" (152.4)
Packaging:
Ship wt: 2.20 lbs (1.00 kg)
NOMINAL GAUGES (mm):
PRODUCT............................................................................................................GAUGE
8" Horizontal ............................................................................................................0.53
D4 Dutch Horizontal ....................................................................................0.40 & 0.44
D4 Horizontal...............................................................................................0.40 & 0.44
8" Vertical Board & Batten......................................................................................0.50
Vertical V .........................................................................................0.40 & 0.44 & 0.50
16" Soffit – 2 Panel .....................................................................................0.29 & 0.38
16" Soffit – 4 Panel .........................................................................0.29 & 0.33 & 0.38
18" Soffit – 3 Panel.................................................................................................0.33
4" Fascia – rib..............................................................................................0.38 & 0.44
6" Fascia – rib & non rib .....................................................(0.38 Rib only) 0.44 & 0.50
8" Fascia – rib & non rib .............................................................................0.44 & 0.50
Gutter Coil ..........................................................................................0.57, 0.66 & 0.79
Flatstock (3037) .......................................................................................................0.50
SOFFIT VENTILATION AREA
Gentek Soffit is available in a variety of profiles. Vented panels are designed to allow
air circulation into the attic areas to aid in the reduction of excessive heat buildup and water vapour condensation. Gentek soffit conforms to CCMC 12860-L.
PROFILE PER
16" – 2 panel
16" – 4 panel
18" – 3 panel
LINEAR FOOT
4.02 sq. in. (26.0 cm2)
4.12 sq. in. (26.6 cm2)
5.46 sq. in. (32.2 cm2)
PER PANEL
48.8 sq. in. (314 cm2)
66.6 sq. in. (429.7 cm2)
78.5 sq. in. (506.5 cm2)
VENTILATION: fully vented
56
All Rainware Accessories Available in above Colours
*BSP - Both Sides Painted / *OSP - One Side Painted
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
57
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
®
STEEL SIDING
STEEL SIDING
PRODUCT CODE & DESCRIPTION
COLOURS
1754
Double 5"
Almond - 832
Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Classic Brown - 400
Dover Gray - 836
Grecian Green - 258
Norwood - 866
Pacific - 201
Red - 688
Sable - 712
Sage - 817
Thistle - 826
Venetian Red - 439
Wicker - 838
1/2" Butt (12.7)
2-5" Exposure per Panel (127/254)
12' Lengths (3658)
PVC Finish
Woodgrain Texture
Packaging:
10 pcs. per ctn.
1 sq. per ctn. (9.29 m2)
Ship. wt: 91 lb (41 kg)
1751
8"
1/2" Butt (12.7)
8" Exposure per Panel (203.2)
12' 6" Lengths (3810)
PVC Finish
Woodgrain Texture
Packaging:
12 pcs. per ctn.
1 sq. per ctn. (9.29 m2)
Ship. wt: 91 lb (41 kg)
Almond - 832
Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Classic Brown - 400
Dover Gray - 836
Norwood - 866
Sage - 817
Thistle - 826
Venetian Red - 439
Wicker - 838
58
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
PRODUCT CODE & DESCRIPTION
1790
Universal™
Double 5" Dutch Lap
1/2" Butt (12.7)
2-5' Exposure per panel (127/254)
12' Lengths (3658)
PVC Finish
Woodgrain Texture
Packaging:
10 pcs. per ctn.
1 sq. per ctn.
Ship. wt: 91 lb (41 kg)
1719
Universal™
12" Vertical
Board & Batten
COLOURS
Almond - 832
Antique Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Classic Brown - 400
Dover Gray - 836
Norwood - 866
Sage - 817
Thistle - 826
Venetian Red - 439
Wicker - 838
12" Exposure per panel (304.8)
10' Lengths (3048)
PVC Finish
Medium Woodgrain Texture
Packaging:
24 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 83 lb (37.65 kg)
59
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES STEEL SIDING
PRODUCT CODE & DESCRIPTION
1813
3/4" Outside
Corner Post
2 1/2" Face
10' Lengths (3048)
PVC Fusion Finish
Woodgrain Texture
Packaging:
10 pcs. per ctn.
100 lineal ft. per ctn. (30.5 m)
Ship. wt: 63 lb (28.58 kg)
1814
3/4" J-Channel
12' 6" Lengths (3810)
PVC Fusion Finish
Smooth Texture
Packaging:
24 pcs. per ctn.
300 lineal ft. per ctn. (91.5 m)
Ship. wt: 42 lb (19.05 kg)
1829
2-1/2" Starter Strip
STEEL SIDING
COLOURS
Almond - 832
Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Dover Gray - 836
Grecian Green - 258
Norwood - 866
Pacific - 201
Red - 688
Sable - 712
Sage - 817
Thistle - 826
Wicker - 838
Almond - 832
Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Dover Gray - 836
Grecian Green - 258
Norwood - 866
Pacific - 201
Red - 688
Sable - 712
Sage - 817
Thistle - 826
Wicker - 838
ARCHITECTURAL
SPECIFICATIONS
GALVANIZED METAL PROPERTIES
Galvanized Steel or Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G90
Specific Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8
Minimum Ultimate Strength (KSI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-55
Minimum Yield (KSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-50
Minimum Elongation (%). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-35
Modulus of Elasticity (KSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29,500
Coefficient of Thermal Expansion (in/in/°F) . . . . . . . . . . . . . . . . . . . . . . . . . 0.000006
Melting Range (°F) Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >2700
Melting Range (°F) Zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 786
Thermal Conductivity at 77°F (btu-in/ft 2-hr-°F) . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
COATING PROPERTIES: Gentek galvanized steel siding products are manufactured with
G90 or equivalent. Both sides of the steel sheet are cleaned with a specially formulated acid
cleaner, water rinsed and then coated with an environmentally safe chemical pretreatment to
enhance corrosion protection and coating adhesion.
The pretreated galvanized surface is coated with a thermoset corrosion-resistant
polymer. This corrosion-resistant polymer is topcoated with the following
polymeric systems:
Plastisol (PVC) Topcoat: This highly weatherable, flexible, chemical-resistant
thermoplastic polymer is melted and fused at temperatures of >390°F. The coating
is applied with a striated pattern or smooth finish having an average film thickness
of 3.0 mils.
Fluoropolymer (PVDF2): This thermoplastic polymer has excellent chemical and
fade resistance. The coating thickness is 0.9 mil. The system is cured at a minimum
temperature of 475°F. This polymer system conforms to the high industry standards
of Kynar 500® and Hylar 5000®. The main criteria for these standards is that the paint
formulation must contain a minimum of 70% PVDF2. Many fluoropolymer coatings
on the market do not meet the high quality and performance standards required by
Kynar 500 and Hylar 5000 specifications.
10' Lengths (3048)
WARRANTY: All Gentek steel siding brands carry a Lifetime Limited Warranty.
Warranty is transferable if home is sold. See printed warranty for complete details.
Packaging:
26 pcs. per ctn.
260 lineal ft. per ctn. (79.3 m)
Ship. wt: 48 lb (22 kg)
CONTACT WITH DISSIMILAR MATERIALS: Direct contact of steel products with certain
dissimilar materials, or contact with water runoff from dissimilar materials, is likely to result in
corrosion. Accordingly, care should be taken during installation to avoid such contact of steel
with
dissimilar materials, including: dissimilar metals (copper, zinc, steel, etc.), concrete, stucco,
asbestos siding, pressure treated/pretreated lumber, masonry, corrosive non-metallic materials,
and roofing materials or roofing systems containing metallic granules or strips.
20 7/8" Width (530.23)
1877 / 29-GA
Flat Stock - PVC coated 50' Lengths (15.24 m)
Packaging:
Ship wt: 58.0 lbs (26.31 kg)
Almond - 832
Ivory - 833
Bright White - 831
Brownstone - 871
Canyon Clay - 810
Dover Gray - 836
Grecian Green - 258
Norwood - 866
Pacific - 201
Red - 688
Sable - 712
Sage - 817
Thistle - 826
Wicker - 838
60
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
PRODUCT PHYSICALS
Product
Coating Type
SteelSide
PVC
Universal
PVC
Thickness†
0.017
0.017
†29 Gauge
†29 Gauge
BUILDING CODES
Gentek steel products meet or exceed the following building code specifications:
ICC-ES Legacy – Report #97-64
AAMA 1406-86
FHA/HUD Minimum Property Standards
KYNAR 500 is a registered trademark of Elf Atochem, North America, Inc.
HYLAR 5000 is a registered trademark of Ausimont USA, Inc.
61
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
VINYL ACCESSORIES COLOUR MATRIX
ACCESSORIES VINYL
Standard Colours
65504 3-1/2" Outside Corner Post (OCP) = =
65524 3-1/2" OCP – Dark Colours
= = = = = = = == =
=
= = = = = = = = = = == =
= ===
65520 Inside Corner Post
= = = = = = = = = = == =
= ===
65521 Inside Corner Post – Dark Colours
65560 1/2" J-Channel
65536 5/8" Premium J-Channel
65533 3/4" Premium J-Channel
65540 1-1/8" J-Channel
65519 1-1/4" J-Channel
65538 2-1/2" Wide Face J-Channel
65570 Undersill Trim
65571 Undersill Trim – Dark Colours
67750 Double Undersill Trim
65581 Drip Cap
65590 Beltline Trim
65700 Surround Starter
65551 Starter Strip
65599 F-Channel
65568 3/8" Soffit Cove J-Channel
65548 Soffit Double Channel
65579 Soffit Cove Moulding
65578 Soffit Crown Moulding
= == =
== =
= =
= = = == === === = =
= =
= = = = = = = == =
= === = = == === === = =
= =
= = = = = = = == =
= =
= = = == === === = =
= =
= = = = = = = == =
= =
=
= = = = = = = = = = == =
= =
= =
= = = = = = = == =
= = = = = = = == =
= = = = = = = = = = == =
= == = = == ==
== =
= = = = = = = = = = == =
= = = = = = = = = = == =
=
= = = = = = = = = = == =
=
= ===
= =
= =
=
= ===
= =
= === = = == === =
= ===
= =
TRIM ESSENTIALS
= = =
=
=
=
== == = =
== == = =
== == = =
== == = =
== == = =
= =
68080 3/4” F-Channel
=
68075 5-3/4" Fluted Corner Post
=
65583 3-1/2" Window/Door Surround
= =
= = == ==
68030 Bay & Bow Outside Corner Post = = = =
62
=
=
65559 Variegated Drip Cap
68020 Beaded Corner Post w/insulation =
68035 3-1/2" H-Trim
= = =
=
65575 Variegated Undersill Trim
68010 5" Fluted Lineal
= = == === === = =
= = = == === =
65532 Variegated 3/4" J-Channel
65750 5" Window/Door Surround
=
=
65566 Variegated 1/2" J-Channel
65606 1-1/4” J-Channel
= = == === === = =
=
65516 Variegated 3-1/2" OCP
65595 Variegated Beltline
Variegated Colours
Sandalwood
Sandstone
Storm
Wicker
Coastal Blue
Dark Drift
Espresso
Harvest Wheat
Iron Ore
Midnight Surf
Moonlit Moss
Mountain Arbor
Rockwell Blue
Saddle Brown
Venetian Red
Windswept Smoke
Aspen
Chestnut
Earthen
Maple
Rainforest
Willow
Neutral
= =
65501 3" Outside Corner Post
65507 6" Designer Outside Corner Post = =
Designer Dark Colours
008
640
631
638
625
655
636
654
642
652
653
630
637
656
688
651
646
648
644
649
645
647
001
632
616
635
010
127
633
012
002
673
006
628
624
Snow White
Almond
Amber
Antique Ivory
Canyon Clay
Dover Gray
Juniper Grove
Linen
Maize
Monterey Sand
Pearl
Pebble
Sage
Standard Colours
=
=
==
== =
=
=
= =
=
== == = =
= =
=
=
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
63
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ACCESSORIES ALUMINUM
ALUMINUM ACCESSORIES COLOUR MATRIX
Standard Colours
Standard Colours
=
== ==
=
= = = = == = = =
==
===
== =
= == === == == =
=
== ==
=
= = = = == = = =
==
===
== =
= == === == == =
1692 CHANNEL RUNNER 3.65 m =
1690 CHANNEL RUNNER 3.65 m
=
1697 6” FACIA (Ribbed)
=
Designer DarkCedarwood
Colours ®
Designer Dark Colours
501 Lambeth Beige
502 Maize
5P8 Monterey Sand
568 Nutmeg
542 Old World Blue
534 Pearl
559 Pebble
430 Rainware White
547 Sable
517 Sage
508 Sandalwood
540 Sandstone
523 Slate
570 Storm
507 Tan
535 Wedgewood Blue
538 Wicker
5P9 Coastal Blue
557 Dark Drift
543 Harvest Wheat
??? Espresso
5P6 Iron Ore
509 Midnight Surf
513 Moonlit Moss
5P1 Mountain Arbor
5P2 Rockwell Blue
569 Saddle Brown
539 Venetian Red
506 Windswept Smoke
990 Cedarwood Aspen Grey
992 Cedarwood Chestnut Brown
994 Cedarwood Maple Tan
996 Cedarwood Tawny Oak
532 Almond
575 Alu Copper
516 Amber
533 Antique Ivory
525 Black
431 Bright White
571 Brownstone
567 Burgundy
510 Canyon Clay
514 Cashmere
554 Chesnut Brown
562 Commercial Brown
536 Dover Gray
556 Forest Green
5P5 Graphite
522 Ivy Green
580 Juniper Grove
Standard
Standard
Colours
Colours
2300 INDIVIDUAL CORNER CAP
=
2311 INDIVIDUAL CORNER CAP
=
Woodgrain
2520 SOFFIT J (BSP)
=
=
2522 SOFFIT J (BSP)
2502 3/4'' J TRIM
=
= == === == == =
=
=
=
=
= = = = == = = =
==
==
== =
2503 UNIVERSAL J
=
= == === == == =
=
=
=
=
= = = = == = = =
==
==
== =
2504 UNDERSILL TRIM
=
=
= === == == =
=
=
=
=
= = = = == = = =
==
==
== =
2538 L TRIM SMALL
=
= == === == == =
=
=
=
=
= = = = == = = =
==
==
== =
2550 SNAPLOCK TRIM
=
=
2543 DRIP CAP
=
= == === == == =
=
=
==
=
= = = = == = = =
==
==
== =
2043 FASCIA TRIM (BSP)
=
= == === == == =
=
=
==
=
= = = = == = = =
==
==
== =
2312 CORNER POST 44MM
==
= == === == == =
=
=
==
=
= = = = == = = =
==
==
== =
=
=
= === == == =
=
=
==
=
= = = = == = = =
==
==
== =
=
=
= === == =
=
=
==
=
= = = = == = = =
==
==
== =
=
=
=
=
=
==
2328 UNIVERSAL STARTER STRIP
Woodgrain
2319 CORNER POST 44MM
Smooth
CEDARWOOD
2567 ROOF EDGE DRIP CAP
=
====
2317 CORNER POST 53MM
Woodgrain
2318 MEDIUM J
====
2320 UNDERSILL TRIM
====
Due to differing conditions in each area, all available product may not be inventoried at each
branch. Please check with your local branch concerning delivery lead times.
64
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Due to differing conditions in each area, all available product may not be inventoried at each
branch. Please check with your local branch concerning delivery lead times.
65
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
PRODUCTS ALUMINUM
ALUMINUM PRODUCTS COLOUR MATRIX
SOFFIT
Standard Colours
FASCIA
FLAT STOCK
Almond
Alu Copper
Amber
Antique Ivory
Black
Bright White
Brownstone
Burgundy
Canyon Clay
Cashmere
Chest nut Brown
Commercial Brown
Dover Gray
Forest Green
Graphite
Ivy Green
Juniper Grove
Lambeth Beige
Maize
Monterey Sand
Nutmeg
Old World Blue
Pearl
Pebble
Rainware White
Sable
Sage
Sandalwood
Sandstone
Slate
Storm
Tan
Wedgewood Blue
Wicker
Coastal Blue
Dark Drift
Espresso
Harvest Wheat
Iron Ore
Midnight Surf
Moonlit Moss
Mountain Arbor
Rockwell Blue
Saddle Brown
Venetian Red
Windswept Smoke
Cedarwood ® Aspen Grey
Cedarwood ® Chestnut Brown
Cedarwood ® Maple Tan
Cedarwood ® Tawny Oak
532
575
516
533
525
431
571
567
510
514
554
562
536
556
5P5
522
580
501
502
673
568
542
534
559
430
547
517
508
540
523
570
507
535
538
525
557
5P3
543
5P6
509
513
539
5P2
569
539
506
990
992
994
996
1600 Soffit 16" 2 Panel Heavy Gauge (PLAIN)
=
=
======
=
===
=
=
=
1607 Soffit 16" 2 Panel Heavy Gauge (VENTED)
=
=
======
=
===
=
=
=
1602 Soffit 16" 2 Panel Standard Gauge (PLAIN)
=
= = = = == = = = = =
=
=
==
=
= == == =
=
=
==
= ==
1603 Soffit 16" 2 Panel Standard Gauge (VENTED) =
= = = = == = = = = =
=
=
==
=
= == == =
=
=
==
==
=
= = = = == = = = = =
=
=== =
=
= == == =
==
== =
== =
==
1606 Soffit 16" 4 Panel Standard Gauge(VENTED) =
= = = = == = = = = =
=
=== =
=
= == == = = = =
== =
== =
= ==
1601 Soffit 16" 4 Panel Standard Gauge (PLAIN)
GUTTER COIL
Cedarwood®
Designer Dark Colours
Standard Colours
2330 Soffit 18" 3 Panel Heavy Gauge (PLAIN)
=
=
=
2345 Soffit 18" 3 Panel Heavy Gauge (VENTED)
=
=
=
=
=
=
=
1694 - Rib 4" Fascia Standard Gauge
1696 - Rib 6" Fascia Standard Gauge
=
= = = = == = = = = =
=
=== =
1698 - Rib 8" Fascia Standard Gauge
=
= = = = == = = = = =
=
2020 - Rib 6" Fascia Heavy Gauge
=
=
=
=
2024 - No Rib 6" Fascia Heavy Gauge
=
=
=
2030 - Rib 8" Fascia Heavy Gauge
=
=
=
2025 - No Rib 8" Fascia Heavy Gauge
=
=
=
3036 Flat Stock 24" x 50' (BSP)
=
==
3037 Flat Stock 24" x 98' 1/2" (BSP)
=
== =
3304 Flat Stock 24" x 50' (BSP)
=
=
==
===
=
=
=
== =
=
3531 Flat Stock 24" x 98' 1/2" (BSP)
=
=
===
=
=
=
== =
=
3311 PVC Striated Flat Stock 24" x 50' (0SP)
=
=
==
=
=
=
=
== =
=
3025 Gutter Coil 10 1/2" (OSP)
=
==
= == = = = = =
3006 Gutter Coil 11 7/8" (OSP)
=
==
=
3009 Gutter Coil 11 7/8" (BSP)
=
==
= == =
===
=
== =
=
=
3012 Gutter Coil 13 1/2" (BSP)
=
=
== =
===
=
==
=
==
3084 Gutter Coil 6" (BSP0
=
=
=
=
= == == = = = =
== =
== =
= ==
=== =
=
= == == = = = =
== =
== =
= ==
=
=
=
=
=
=
==
=
=
=
=
==
=
=
=
=
=
==
= ==
== =
= ==
=
=
= == = = = = =
=
==
= == = = = = =
==
= === ====
===
=
==
=
= ====
==
=
===
Due to differing conditions in each area, all available product may not be inventoried
at each branch. Please check with your local branch concerning delivery lead times.
66
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
== == = = = =
=
== == = = = = = == =
=== == == = = = =
=
=
==
= ==
=== == == =
=
=
==
= ==
==
=
==
=====
== =
== =
=
==
=
===
= ==
=
=
Due to differing conditions in each area, all available product may not be inventoried
at each branch. Please check with your local branch concerning delivery lead times.
67
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
STEEL ACCESSORIES
COLOUR MATRIX
ACCESSORIES
832
833
831
871
810
400
836
258
866
201
688
712
817
826
439
838
Almond
Ivory
Bright White
Brownstone
Canyon Clay
Classic Brown
Dover Gray
Grecian Green
Norwood
Pacific
Red
Sable
Sage
Thistle
Venetian Red
Wicker
Standard Colours
1813 3/4” Outside Corner Post
= = = === ==== == === =
1814 3/4” J-Channel
= = = === ==== == === =
1829 2-1/2” Starter Strip
= = = === ==== == === =
1877 / 29-GA Flat Stock - PVC coated
= = = === ==== == === =
Due to differing conditions in each area, all available product may not be inventoried
at each branch. Please check with your local branch concerning delivery lead times.
68
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
69
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
VINYL COLOUR PALETTE
VINYL COLOUR PALETTE
Standard Colours
Designer Dark Colours
Snow White - 001
Almond - 632
Amber - 616
Antique Ivory - 635
Coastal Blue - 625
Dark Drift - 655
Espresso - 636
Harvest Wheat - 654
Canyon Clay - 010
Dover Gray - 127
Juniper Grove - 633
Linen - 012
Iron Ore - 642
Midnight Surf - 652
Moonlit Moss - 653
Mountain Arbor - 630
Maize - 002
Monterey Sand - 673
Pearl - 006
Pebble - 628
Rockwell Blue - 637
Saddle Brown - 656
Venetian Red - 688
Windswept Smoke - 651
Earthen - 644
Maple - 649
Variegated Colours
Sage - 624
Sandalwood - 008
Sandstone - 640
Storm - 631
Aspen - 646
Chestnut - 648
Rainforest - 645
Willow - 647
Wicker - 638
70
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
71
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ALUMINUM COLOUR PALETTE
ALUMINUM COLOUR PALETTE
Standard Colours
Standard Colours
Almond - 532
Alu Copper - 575
Amber - 516
Antique Ivory - 533
Rainware White - 430
Sable - 547
Sage - 517
Sandalwood - 508
Black - 525
Bright White - 431
Brownstone - 571
Burgundy - 567
Sandstone - 540
Slate - 523
Storm - 570
Tan - 507
Canyon Clay - 510
Cashmere - 514
Chestnut Brown - 554
Commercial Brown - 562
Wedgewood Blue - 535
Wicker - 538
Designer Dark Colours
Dover Gray - 536
Forest Green - 556
Graphite - 5P5
Ivy Green - 522
Juniper Grove - 580
Lambeth Beige - 501
Maize - 502
Monterey Sand - 3D
Nutmeg - 568
Old World Blue - 542
Pearl - 534
Pebble - 559
72
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
Coastal Blue - 525
Dark Drift - 557
Espresso - 5P3
Harvest Wheat - 543
Iron Ore - 5P6
Midnight Surf - 509
Moonlit Moss - 513
Mountain Arbor - 539
Rockwell Blue - 5P2
Saddle Brown - 569
Venetian Red - 539
Windswept Smoke - 506
73
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.
ALUMINUM COLOUR PALETTE
Cedarwood®
Cedarwood®
Aspen Grey - 990
Cedarwood®
Cedarwood®
Chestnut Brown - 992 Maple Tan - 994
Cedarwood®
Tawny Oak - 996
74
EFFECTIVE January 1, 2014 Not all products and colours available at all locations. Please check with your local Gentek branch
for product availability. Product Improvement Policy: Gentek Building Products is constantly improving design and manufacturing processes.
We therefore must reserve the right to change specifications without notice. Please consult Gentek Building Products website at
www.gentek.ca for up-to-date product specifications.