Torque Multiplier

Transcription

Torque Multiplier

Torque
Multiplier
CATALOG
version 1.0
Table of Contents
(1.1) Torque Multiplier Intro
(1.2) Torque Multiplier Intro
(1.3) Torque Chart
(1.4) EFCip
(1.5) EF & EFW
(1.6) EF & EFW
(1.7) CLD
(1.8) CLS
(1.9) MTM
(1.10) HG
(1.11) HSD
(1.12) RG
(1.13) Accessories
(1.14) 6Pt Sockets
TABLE OF
CONTENTS
i
MC 14 (version1.0)
Mountz Eliminator Torque Multipliers
are available in hand, pneumatic and
electric models. These tools are the
ideal solution for true torque control,
speed, power, physical ease, silence
and safety.
Torque
Multipliers
In nearly every heavy industrial application,
turning threaded fasteners, nuts and bolts
is generally viewed by two criteria:
(1) The need to fasten tightly enough to
prevent movement of parts and achieve
a good seal without exceeding the
fastener s elasticity level.
(2) Successful removal of fasteners after
long periods of environmental exposure
to harsh conditions.
Selecting the right heavy torque tool for
the job is crucial. When it comes to
turning nuts and bolts, especially stubborn
corroded ones, what could be more basic
than power?
In t r oduc t ion
01.1
You need controlled power. That is,
controlled torque, which provides
smooth torque, with continuous rotation.
Otherwise, you could outdo yourself and
strip threads, break bolt heads or even
cause personal injury.
Technicians are finding that the best
solution for applying high torque today
is with a complete range of torque control
products, including manual and powered
torque wrenches and torque multipliers.
Mountz torque multipliers provide
precision torque control, making it
easier and often safer to assemble and
service-threaded fasteners while
reducing application problems and
tool costs.
Mountz Torque Multipliers vs.
Hydraulics Wrenches Hydraulic wrenches are notorious for their
heavy ratchets, bulky compressors and
laborious operation. Hydraulic tools
operate through a hydraulic ram that
extends and retracts, ratcheting the head.
This is a long and tedious process that
requires the operator to activate and stand
by the pump with a hand-held controller.
Torque Multipliers increase speed and
productivity, as it is faster than a hydraulic
wrench and is less expensive. Designed
to deliver smooth torque control, with
continuous rotation, these torque
multipliers eliminate the cumbersome set
up time and slow ratcheting process of
hydraulic wrenches.
Mountz Torque Multipliers vs.
Impact Wrenches Impact wrenches are destructive by nature
with its hammering design. These
tools are not ergonomically friendly to
an operator and require a high
maintenance budget. Mountz torque
multipliers are ergonomically safer than
the harmful hammering of impact
wrenches and eliminates frequently costly
repairs of impact wrenches.
HAND MULTIPLIERS
These torque multipliers are the ideal
tools for applications where air and
electricity aren t easily accessible.
The gearing design allows for a high
torque output with minimal input.
Commonly used in petrochemical,
power generation, transportation,
shipping and maintenance industries.
Page 01.9 - 01.11
PNEUMATIC MULTIPLIERS
Designed for precision tightening and
loosening of all heavy duty fastening
connections the pneumatic multipliers
are non-impacting and operate at a
smooth, continuous rotation. The
torque control is obtained with the
use of an air pressure regulator and
the tool will shut off once torque is
achieved.
Page 01.7, 01.8, 01.12
ELECTRIC MULTIPLIERS
Electric multipliers increase speed
and productivity. With a brushless
motor design these tools are low
maintenance and feature a universal
AC Input (100-253V / 45-66 Hz).
The speed, frequency and torque are
correspondingly regulated and
controlled with a built-in controller.
The electric multipliers are nonimpacting and operate at a smooth,
continuous rotation.
Page 01.4 - 01.6
In t r oduc t ion
ISO 9001and ISO 17025 Company
01.2
Torque Chart
Eliminator CLD & CLS
ELIMINATOR CLD
100
PHYSICAL EASE
Vibration-free operation
prevents operator fatigue.
RUNNING AIR PRESSURE - PSI
90
80
70
60
50
40
30
20
10
NOISE
Only 81 decibels at three feet
(one meter).
0
1000
2000
3000
4000
5000
6000
5000
6000
TORQUE - lbf.ft
ELIMINATOR CLS
SAFETY
Smooth continuous operation is
safer than the vibration and
hammering of typical impact
wrenches.
100
TORQUE CONTROL
Torque control is obtained with the
use of an air pressure regulator.
Exhaustive tests have shown that
torque multipliers will stall out
consistently to within 5% of the
same torque figure at a given constant
air pressure.
NOTE!
All curves are approximate
values. Many factors such as
differences in compressed air
supplies, joint characteristics,
and other application related
variables can cause deviations
from reported torque output.
RUNNING AIR PRESSURE - PSI
90
80
70
60
50
40
GEAR 2
GEAR 1
30
20
10
0
1000
2000
3000
4000
TORQUE - lbf.ft
TORQUE CHART
01.3
800.456.1828
EFCip
Electric Torque Multiplier
(with built-in controller)
STANDARD
Model
Item #
Torque Ranges
N.m
lbf.ft
Speed
RPM
EFCip10
EFCip20
EFCip30
EFCip40
EFCip50
EFCip60
EFCip70
EFCip80
EFCip90
EFCip100
210300
210301
210302
210303
210304
210305
210307
210308
210310
210311
52 - 295
59 - 442
111 - 727
185 - 1106
221 - 1327
332 - 1843
443 - 2581
590 - 3097
738 - 3688
959 - 4646
76
38
24
15
13
12
9
7
6
4
Model
Item #
Torque Ranges
N.m
lbf.ft
Speed
RPM
EFCip10 Plus
EFCip20 Plus
EFCip30 Plus
EFCip40 Plus
EFCip50 Plus
EFCip60 Plus
EFCip70 Plus
EFCip80 Plus
EFCip90 Plus
EFCip100 Plus
210312
210313
210314
210316
210315
210661
210318
210319
210320
210662
52 - 295
59 - 442
111 - 727
185 - 1106
221 - 1327
332 - 1843
443 - 2581
590 - 3097
738 - 3688
959 - 4646
76
38
24
15
13
12
9
7
6
4
PLUS
70 - 400
80 - 600
150 - 1000
250 - 1500
300 - 1800
450 - 2500
600 - 3500
800 - 4200
1000 - 5000
1300 - 6300
70 - 400
80 - 600
150 - 1000
250 - 1500
300 - 1800
450 - 2500
600 - 3500
800 - 4200
1000 - 5000
1300 - 6300
To r que Mu l t ip l ie r s
KEY FEATURES
Accuracy better than
5%.
Precision tightening and loosening of all heavy duty fastening connections.
Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth,
Increases speed and productivity, 5-10 times faster than slow ratcheting hydraulic
wrenches. Less expensive than hydraulic wrenches.
Ergonomically safer than the harmful hammering of impact wrenches.
Eliminates frequent and costly repairs of impact wrenches.
Standard models feature LED Display or Plus models feature LC Display.
Microprocessor controlled. The speed, frequency and torque correspond
with built-in controller (no separate box needed).
Length
Brushless motor design provides low maintenance.
218 mm
Over-heat protection.
Universal AC Input (100-253V / 45-66 Hz).
173
mm
The handle can free float or locks in set position.
Protected against dampness and spattered water, IP54 protection.
217
mm
Spline
D2
90 mm
STANDARD MODELS
DIMENSIONS and WEIGHT
Model
EFCip10
EFCip20
EFCip30
EFCip40
EFCip50
EFCip60
EFCip70
EFCip80
EFCip90
EFCip100
Square
Drive
Spline
Dia. mm
D2
mm
Length
in. mm
3/4"
3/4"
3/4"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
41
41
41
54
54
54
72
72
72
72
85
85
85
85
85
98
98
123
123
123
13
13
13
15
15
15.3
16
16
16.9
16.9
330
330
330
382
382
388
406
406
428
436
RENTAL!
Torque Multipliers are part of our
Rental Program. Ask a customer service
representative about availability.
Weight
lbs.
19.8
19.8
19.8
22
22
24.2
29.1
29.1
38.6
40.8
Feature LED Display:
Preset torque with 19
stages as well as
adjustable torque
direction.
PLUS MODELS
Feature LC Display:
Preset torque & rotation angle can
be set and displayed as well as
adjustable torque direction.
Right/Left Indicator
Torque Setting
Controls for Settings
Torque Setting
Rotation Angle Setting
Controls for Settings
EFCip
01.4
To r que
Mu l t ip l ie r s
KEY FEATURES
Ac ces s o r ies
Ac ces s o r ies
Accuracy better than 5%.
Shuts-off when pre-set torque is achieved. Non-impacting and operates at a
smooth, continuous rotation.
Increases speed and productivity, 5-10 times faster than slow ratcheting
hydraulic wrenches. Less expensive than hydraulic wrenches.
Eliminates frequent and costly repairs of impact wrenches.
Standard models feature LED Display or Plus models feature LC Display.
RETENTION RING
Used to hold a reaction foot,
bar or ring on the Multiplier.
See Page 01.13
6 PT. IMPACT SOCKETS
A wide range of durable
sockets available.
See Page 01.14
EF / EFW
01.5
800.456.1828
Microprocessor controlled. The speed, frequency and torque correspond
with built-in controller (no separate box needed).
Brushless motor design provides low maintenance.
Over-heat protection.
Universal AC Input (100-253V / 45-66 Hz).
The handle can free float or locks in set position.
EF & EFW
PLUS MODELS
Feature LC Display:
Preset torque & rotation
angle can be set and
displayed as well as
adjustable torque direction.
Electric Torque Multipliers (with built-in controller)
B
C
E
F
EF Series
A
In-Line
Mu l t ip l ie r
STANDARD MODELS
Feature LED Display:
Preset torque with 19
stages as well as
adjustable torque
direction.
F
A
LEGEND
A On/Off
D
B Torque Setting
B
C Rotation Angle Setting
EFW Series
D Right/Left Indicator
E
Righ t Ang l e
Mu l t ip l ie r
E Controls for Settings
F Operation Buttons:
CW Direction,
Start/Stop, and
CCW Direction
STANDARD
EF
PLUS
STANDARD
EFW
PLUS
Torque Ranges
N.m
Model
Item #
Model
Item #
Model
Item #
Model
Item #
lbf.ft
EF100
EF200
EF250
EF300
EF400
EF600
EF800
EF1000
210604
210605
210606
210607
210608
210609
210610
210611
EF100Plus
EF200Plus
EF250Plus
EF300Plus
EF400Plus
EF600Plus
EF800Plus
EF1000Plus
210624
210625
210626
210627
210628
210629
210630
210631
EFW100
EFW200
EFW250
EFW300
EFW400
EFW600
EFW800
EFW1000
210614
210615
210616
210617
210618
210619
210620
210621
EFW100Plus
EFW200Plus
EFW250Plus
EFW300Plus
EFW400Plus
EFW600Plus
EFW800Plus
EFW1000Plus
210634
210635
210636
210637
210638
210639
210640
210641
118 - 796
221 - 1548
320 - 1987
368 - 2286
663 - 3134
811 - 4536
1327 - 5752
1512 - 7228
160 - 1080
300 - 2100
435 - 2695
500 - 3100
900 - 4250
1100 - 6150
1800 - 7800
2050 - 9800
Speed
RPM
RENTAL!
Torque Multipliers are
part of our Rental
Program. Ask a
customer service
representative about
availability.
33
16
14
12
8
7
4
3
NOTE!
Remote Control
operation available. See
Accessories page 01.13
All Weather models
available.
Length
Model
Square Spline
Drive Dia. mm
D2
mm
Length
in.
mm
EF100
EF200
EF250
EF300
EF400
EF600
EF800
EF1000
1"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
85
85
85
98
98
123
148
173
20.2
20.2
20.2
20.2
20.6
21.6
21.8
21.8
54
54
54
72
72
72
72
91
515
515
515
515
525
550
555
555
Spline
D2
60 mm
Weight
lbs.
28.5
28.5
28.5
31
32
42
48.5
59.5
EF Series
105 mm
346 mm
60 mm
104
mm
Model
Square Spline
Drive Dia. mm
D2
mm
Height
Weight
in.
mm lbs.
EFW100
EFW200
EFW250
EFW300
EFW400
EFW600
EFW800
EFW1000
3/4"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
85
85
85
98
98
123
148
173
11.2
11.2
11.2
12
12.5
13.7
13.7
15
54
54
54
72
72
72
72
91
285
285
285
305
320
350
350
380
30
30
30
30
35
44
52.5
64
EFW Series
Height
D2
Spline
EF / EFW
01.6
CLD
Pneumatic Torque Multiplier
(Rotating Body Tool)
CLD
KEY FEATURES
Torque Ranges
N.m
Square
Drive
Model
Item #
lbf.ft
CLD55
CLD85
CLD85
CLD105
CLD125
CLD155
CLD225
CLD280
CLD380
CLD580
CLD780
CLD980
210572
210573
210574
210575
210576
210577
210571
210578
210579
210580
210581
210582
121 - 357
225 - 660
225 - 660
270 - 796
332 - 970
435 - 1275
671 - 1970
870 - 2552
1100 - 3230
1534 - 4510
1925 - 5660
2810 - 8257
Speed
RPM
Spline
D2
Dia. mm mm
Length
mm
in.
Weight
lbs.
48
25
25
15
12
10
8
6.5
4
2.5
1
0.5
41
41
54
54
54
54
54
54
72
72
72
91
11
11.8
11.8
11.8
11.8
11.8
11.8
11.8
12.6
13.8
13.8
14.6
15
18
18
18
18
18
20
20
26
35
42
55
165 - 485
305 - 895
305 - 895
365 - 1080
450 - 1315
590 - 1730
910 - 2670
1180 - 3460
1490 - 4380
2080 - 6115
2610 - 7675
3810 - 11195
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
5%.
Compact design is safe, easy, and simple to
handle.
Ac ces s o r ies
Precision tightening and loosening of all heavy
duty fastening connections.
Flexible tool positioning with 360 rotating handle.
Shuts-off when pre-set torque is achieved.
Non-impacting and operates at a smooth,
Torque adjustment and control is regulated by the
Lubro Control Unit (LCU) via the air supply.
Multiplier increases speed and productivity, as it
is faster than a hydraulic wrench and is less
expensive. Eliminates the cumbersome set up
time and slow ratcheting process of hydraulic
wrenches.
REACTION RING
Reaction Devices:
Foot, Bar and Ring.
See Page 01.13
Model
CLD55
CLD85
CLD85
CLD105
CLD125
CLD155
CLD225
CLD280
CLD380
CLD580
CLD780
CLD980
Ergonomically safer than the harmful hammering
of impact wrenches. Eliminates the frequent
costly repairs of impact wrenches.
85
85
85
85
85
85
85
85
98
123
148
173
280
300
300
300
300
300
300
300
320
350
350
370
210 mm
Heavy-duty gearbox.
Length
sockets available.
Spline
Diameter
See Page 01.14
Connec t
Wi t h A:
D2
NOTE!
LCU-2
Our Lubro-Control Unit is designed
to provide a controlled supply of
filtered, regulated and lubricated
compressed air to the Multiplier.
See Page 01.13
All Pneumatic Multipliers should use a
high quality air filter regulator.
RENTAL!
CLD
01.7
800.456.1828
Moun t z MC14 ca t a l og Copy r igh t ©2008 a l l r igh t s r ese r ved
CLS
Pneumatic Torque Multipliers
(Fixed Body Tool)
Compact design is safe, easy, and simple to handle.
Two Options; Single Speed models are high speed with low torque range,
and Two Speed models feature manual two-speed gearbox for controlled
screw tightening with high torque range.
Shuts-off when pre-set torque is achieved. Non-impacting and operates
at a smooth, continuous rotation.
Torque adjustment and control is regulated by the Lubro Control Unit
(LCU) via the air supply.
Multiplier increases speed and productivity, as it is faster than a
hydraulic wrench and is less expensive. Eliminates the cumbersome set
up time and slow ratcheting process of hydraulic wrenches.
To r que Mu l i t ip l ie r s
Eliminates the frequent costly repairs of impact wrenches.
Heavy-duty gearbox.
210 mm
Length
NOTE!
All models supplied with
Reaction Foot, except *.
Length
All Pneumatic Multipliers should
use a high quality air filter regulator.
D2
Spline
Diameter
Spline
Diameter
SINGLE SPEED
Torque Ranges
N.m
Model
Item #
lbf.ft
CLS15
CLS15
CLS25
CLS25
CLS35
CLS45
CLS75
CLS95
CLS135
CLS175
CLS255
CLS315
CLS1700*
213030
213031
213032
213033
213034
213035
213036
213037
213038
213039
213040
213041
213021
44 - 162
44 - 162
70 - 206
70 - 206
99 - 287
121 - 357
225 - 660
269 - 796
365 - 1069
475 - 1401
671 - 1969
870 - 2551
1180 - 12540
Model
CLS15
CLS15
CLS25
CLS25
CLS35
CLS45
CLS75
CLS95
CLS135
CLS175
CLS255
CLS315
CLS1700*
Square
Drive
60 - 220
60 - 220
95 - 280
95 - 280
135 - 390
165 - 485
305 - 895
365 - 1080
495 - 1450
645 - 1900
910 - 2670
1180 - 3460
1600 - 17000
1/2"
3/4"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
2 1/2 "
Speed
RPM
Spline
Dia. mm
D2
mm
Length
in.
mm
Weight
lbs.
60
60
38
38
34
27
19
13
9
7
6
4
1
41
41
41
41
41
41
41
41
54
54
54
54
*
85
85
85
85
85
85
85
85
85
85
85
85
275
10
10
10
10
10
10
10.9
10.9
11.8
11.8
13
13
22.4
13.2
13.2
14.3
14.3
14.3
14.3
16.5
16.5
17.6
17.6
19.8
19.8
132
255
255
255
255
255
255
277
277
300
300
330
330
570
210 mm
D2
Ac ces s o r ies
See Page 01.13
TWO SPEED
Torque Ranges
N.m
Model
Item #
lbf.ft
CLS2/100
CLS2/100
CLS2/150
CLS2/300
CLS2/400
CLS2/600
CLS2/800
CLS2/1000
CLS2/4800*
213001
213002
213014
213003
213004
213006
213008
213010
213005
88 - 830
88 - 830
125 - 1191
284 - 2651
398 - 3728
620 - 5800
745 - 6960
866 - 8120
3466 - 35845
Square
Drive
120 - 1125
120 - 1125
170 - 1615
385 - 3595
540 - 5055
840 - 7865
1010 - 9435
1175 - 11010
4700 - 48600
3/4"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
2 1/2"
REACTION BAR
Reaction Devices:
Foot, Bar and Ring.
* Supplied with Reaction Ring
Model
CLS2/100
CLS2/100
CLS2/150
CLS2/300
CLS2/400
CLS2/600
CLS2/800
CLS2/1000
CLS2/4800
Speed RPM
Low High
Spline
Dia.
D2
mm
mm
Length
mm
in.
Weight
lbs.
12
12
7
5
3
2
1.5
1
0.3
41
54
54
54
72
72
72
91
*
13
13
13
14.2
15
16.1
16.1
16.9
22.4
15
15
16
20
24
33
44
53
132
36
36
21
15
9
6
5
4
0.6
85
85
85
85
98
123
148
173
275
330
330
330
360
380
410
410
430
570
LCU-2
Our Lubro-Control Unit is
designed to provide a
controlled supply of
filtered, regulated and
lubricated compressed air
to the Multiplier.
RENTAL!
The CLS is part of our Rental Program. Ask a customer
service representative about availability.
* Supplied with Reaction Ring
CLS
01.8
MTM
Hand Multiplier
Model
Item #
Maximum Torque
Input
Output
lbf.ft
N.m
lbf.ft
N.m
MTM-15
MTM-27
215026
215027
170
559
1105
2000
231
758
1500
2700
Model
Female Input
Square Drive
Male Output
Square Drive
Torque
Multiplication
Ratio
MTM-15
MTM-27
1/2 "
3/4 "
3/4 "
1"
6.5:1
3.3:1
HEAD DIMENSIONS and WEIGHT
Length
mm
Model
in.
MTM-14
MTM-27
6 1 /3 "
7 1 /2 "
160
190
MTM-15 Case Set
Multiplier
Reaction Bar (L = 380mm)
Reaction 90° Base
Reaction 90° Bar
Breakaway Adapter
KEY FEATURES
Precision tightening for heavy duty fastening connections.
Constructed with quality steel and matted finish.
Commonly used in construction, heavy equipment & power generation industries.
Portable, compact and lightweight.
Torque Multiplication Ratio - low energy input with high torque output.
For operation in combination with a torque wrench.
Ideal for remote locations where no source of power is available.
Includes plastic case.
MTM-27 Case Set
Multiplier
Reaction Bar (L = 380mm)
Reaction 90° Base
Reaction 90° Bar
MTM
01.9
800.456.1828
in.
Height
mm
3 7 /8 "
4 1/3 "
97
111
Weight
lbs.
5.7
7.5
HG
Hand Multiplier
Model
Item #
Maximum
Torque Output
N.m
lbf.ft
H-10*
H-15*
HG-10
HG-15
HG-20
HG-30
HG-40
HG-50
HG-60
HG-80**
213700
213701
213702
213703
213704
213705
213706
213707
213708
213709
1033
1033
1033
1033
2581
3687
4425
5900
8480
36880
HG
1400
1400
1400
1400
3500
5000
6000
8000
11500
50000
Torque
Multiplication
Ratio
Gear
Ratio
3.5:1
3.5:1
3.5:1
3.5:1
11.5:1
14.3:1
16:1
20.5:1
23.2:1
126:1
4
4
4
4
16
18
21
24
28
180
**Not fitted with Anti-Windup.
**All models supplied with Reaction Foot,
**except HG-80 supplied with Reaction Ring.
KEY FEATURES
Ac ces s o r ies
DRIVE SIZE,
Square Drive Spline
Model Male Output Dia. mm
H-10* 3/4"
41
H-15* 1"
41
HG-10 3/4"
54
HG-15 1"
54
HG-20 1"
54
HG-30 1 1/2"
72
HG-40 1 1/2"
72
HG-50 1 1/2"
72
HG-60 1 1/2"
91
HG-80 2 1/2"
*
D2
mm
85
85
85
85
85
98
123
148
173
275
*Weights do not include reaction device.
180
200
180
200
235
250
280
280
290
360
8
8.8
8
8.8
13.3
15.6
33
35.3
61.8
128
Precision tightening and loosening of all heavy
duty fastening connections.
For operation in combination with a torque
wrench.
Length
Weight
in. mm lbs.
7
7.9
7
7.9
9.3
9.8
11
11
11.4
14.2
5%.
Torque Multiplication Ratio - low energy input
with high torque output.
Compact design allows for operation in
space-restricted applications.
sockets available.
See Page 01.14
Ideal tool for applications where air and electricity
aren t easily accessible.
Most models furnished with anti-windup ratchets
allowing jobs to be performed easily, efficiently
and safely.
Shear pin at input drive protects gearbox in case
of torque overload.
Constructed with quality steel.
Each tool contains extra sheer pins and torque
multiplication selection chart.
Female Input
3/4 " Square Drive
(all models)
RETENTION RING
Holds a reaction foot, bar
or ring on the Multiplier.
L
See Page 01.13
Spline
Diameter
D2
RATCHET END
RENTAL!
HG
01.10
HSD
Hand Multiplier - Sensor Controlled
HSD
Hand Multiplier
Sensor Controlled
Torque Ranges
N.m
Model
Item #
lbf.ft
HSD 50
HSD 100
HSD 200
HSD 300
HSD 400
HSD 600
HSD 800
HSD 1000
HSD 2250
213946
213947
213948
213949
213942
213950
213952
213953
213951
37 - 368
74 - 737
148 - 1475
222 - 2212
295 - 2950
443 - 4425
590 - 5900
737 - 7375
1660 - 16595
50 - 500
100 - 1000
200 - 2000
300 - 3000
400 - 4000
600 - 6000
800 - 8000
1000 - 10000
2250 - 22500
PTT - Bolt Audit Model
Sold Separately
Item #072995
PTT
Manual Sensor-Tool
Joint
TorqueControlled
Measurement
Data Export:
PC Output,
Documentation
Female Input
3/4 " Square Drive
(all models)
KEY FEATURES
Hand Multiplier with built-in transducer.
L
Torque and Angle can be monitored or pre-set using the PTT
inconjunction with the transducerized multiplier.
Precision tightening and loosening of all heavy duty
fastening connections.
Low energy input with high torque output.
Export data to a PC for documentation control with PTT.
Using the PTT-2000 Bolt Audit Model with HSD, the
system is designed for auditing a fastener for a test such as
determining relaxation after a fastener has been tightened.
The purpose of the bolt audit function is to report the
degree of movement from the initial torque threshold to the
final torque threshold. The PTT will display the final
torque threshold and the total angle displacement, which
has occurred from the initial torque threshold and final
torque threshold.
HSD
01.11
For operation in combination with a torque wrench.
D2
Spline Diameter
Model
Spline
Length Weight
Male Output Dia. D2
Square Drive mm
mm in. mm lbs.**
HSD 50
HSD 100
HSD 200
HSD 300
HSD 400
HSD 600
HSD 800
HSD 1000
HSD 2250
3/4"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
2 1/2"
41
54
54
72
72
72
72
91
*
85
85
85
98
98
123
148
173
275
8.7
8.7
11.6
12.5
12.5
16.9
16.9
17.3
20
220
220
295
320
320
430
430
440
510
12.3
16.5
17.6
22
23.1
41.8
44
70.5
137
*All models supplied with Reaction Foot,
except HSD 2250 supplied with Reaction Ring.
**Weights do not include reaction device.
RENTAL!
The HSD is part of our Rental Program. Ask a
customer service representative about availability.
RG
(Radial Gearing)
Pneumatic & Electric Radial
Torque Multipliers
Compact design is safe, easy, and simple to handle.
Low profile radial head allows access where clearance is limited.
Specially designed for heat plate exchanger applications.
Continuously rotating hex drive is faster than hydraulics and more
reliable than impacting tools.
Torque reaction is absorbed by means of a reaction stud.
To r que Mu l i t ip l ie r s
Hex drive size reduces or enlarges with drop in hex adapters.
Electric models - Universal AC Input (100-253V / 45-66 Hz) and
features LED display (see page 05.4).
PNEUMATIC
Torque Ranges
N.m
Model
Item #
lbf.ft
RCL-36P
RCL-46P
RCL-80P
210038
210040
210182
435 - 3123
465 - 3344
494 - 3569
Speed RPM
Low High
590 - 4235
630 - 4535
670 - 4840
1
1
2
3
3
6
L
W
Length
in. mm
15.7 400
17.1 435
17.7 450
Width
in. mm
6.4 163
7.4 188
9.1 230
Stud Bolts
A2 A1
mm mm
100
112
160 130
RCL-36P
RCL-46P
R
A1
Hex
Drive
mm
Model
RCL-36P 36
RCL-46P 46
RCL-80P 80
Pneuma t ic Mode l s
Connec t Wi t h A:
L
Radius
mm
56
73
85
Wt.
lbs.
27.5
30.8
46.3
A2
W
RCL-80P
R
LCU-2
A1
Provides a controlled
supply of filtered, regulated
and lubricated compressed
air to the Multiplier.
NOTE!
L
All Pneumatic Multipliers should use
a high quality air filter regulator.
See Page 01.13
W
ELECTRIC
Item #
Model
EFC-R 36P
EFC-R 46P
EFC-R 80P
EF-R 36P
EF-R 46P
EF-R 80P
210184
210185
210186
210187
210188
210189
Torque Ranges
N.m
lbf.ft
413 - 2787
413 - 2787
413 - 2787
413 - 2787
413 - 2787
413 - 2787
Speed
RPM
560 - 3780
560 - 3780
560 - 3780
560 - 3780
560 - 3780
560 - 3780
2
2
2
13
12
11
EFC-R 36P
EFC-R 46P
R
A1
L
HEX ADAPTERS
Sold Separately.
Stock sizes listed.
Custom sizes available.
A2
W
EFC-R 80P
R
A1
Length
in. mm
15.2 385
16.7 425
18.7 475
19.6 500
21.6 550
23.6 600
Width
in. mm
6.4 163
7.4 188
9.1 230
6.4 163
7.4 188
9.1 230
Stud Bolts
A2 A1
mm mm
100
112
160 130
100
112
160 130
Radius
mm
56
73
85
56
73
85
RENTAL!
RG Multipliers are part of our Rental Program.
Ask a customer service representative about
availability.
Wt.
lbs.
26.3
33
48.5
36.3
41.8
57.3
30mm
216002
W
EF-R 36P
EF-R 46P
A1
L
Standard
Hex Drive in.
36
46
80
1 1/16" 1 7/16" 1 13/16"
216027 216030 216046
27mm 41mm 50mm
1 5/8"
1 1/8"
2"
216001 216005 216021 216028 216031 216047
L
R
80
24mm 36mm 46mm
216000 216004 216020
Hex
Dr.
Model
mm
EFC-R 36P 36
EFC-R 46P 46
EFC-R 80P 80
EF-R 36P 36
EF-R 46P 46
EF-R 80P 80
Metric
Hex Drive mm
36
46
A2
32mm
216003
55mm
1 1/4"
216022 216029
60mm
3 31/32"
216023 216026
65mm
216024
2 3/16"
216048
2 9/16"
216050
70mm
216025
2 3/4"
216051
2 3/8"
216049
W
EF-R 80P
R
A1
RG
01.12
Accessories
Torque Multipliers
REMOTE CONTROL
Operate with full control from a safe distance.
Illustration shows dual tool operation (used in tandem).
NOSE EXTENSIONS
Allows Torque Multipliers to be used in
confined spaces. Fits over nose in place of
normal reaction device. Special orders available.
Hand or Foot
Remote Control
LCU
PNEUMATIC
LCU
This unit is designed to provide a
controlled supply of filtered,
regulated and lubricated
compressed air to the tool. The
unit is supplied with a 10 foot
hose and one 1/2" NPT
connector and 300 PSI Rating.
For tools rated at 40 SCFW.
Model: LCU-2
Pipe Size: 1/2" NPT
FRL Out Max PSIG: 200
FRL In Max PSI: 200
Weight (approx): 7 lbs.
Output: 1/2" Fem Swivel
Input: 1/2" NPT male
Item #061429
Model
Item #
Remote Control
Operation
FBL
FBL 2
FBL 2
210593
210596
210273
Hand
Hand
Foot
Single Tool
Dual Tool
Dual Tool
ELECTRIC
NOTE!
2-1/2" Dia. Gage: (0-160 PSI with 5
PSI graduation) Liquid Filled
Model
Item #
Remote Control
Operation
FBE
FBE 2
FBE 4
210274
210275
210276
Hand
Hand
Hand
Single Tool
Dual Tool
Four Tool
POWER GEAR
2 1/2 " Square Drive
Connect the Power Gear to a torque
multiplier and increase output.
Works with: Increase Max. Torque
CLS2/100
CLS45
EF100
33190 lbf.ft / 45000 N.m
12540 lbf.ft / 17000 N.m
33190 lbf.ft / 45000 N.m
Model: G45
Gear Ratio: 45:1
Torque Multiplication Ratio:
38~40:1 (variable due to friction)
Weight: 132 lbs. (60kg)
Item #210269
Holds a reaction foot,
bar or ring on the Multiplier.
Model
(Length)
Item #
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
NE - 6"
NE - 9"
NE - 12"
NE - 18"
NE - 6"
NE - 9"
NE - 12"
NE - 18"
NE - 6"
NE - 9"
NE - 12"
NE - 18"
NE - 6"
NE - 9"
NE - 12"
NE - 18”
064250
064251
064253
064254
064255
064256
064257
064258
064259
064260
064261
064262
064263
064264
064265
064266
3/4"
275
mm
1"
TRIGGER LOCK for CLD, CLS, RCL
Operate hands free, forward
and reverse. (not pictured)
Item# 210590
Input
Drive
REACTION DEVICES
To select a device, reference the Multiplier’s Spline Diameter and D2 sizes as listed in the specification charts.
Y
REACTION BAR
Y
Y
REACTION
FOOT
Spline Dia. mm
Item #
41
54
72
91
21-10271
21-10273
21-10275
21-10277
Ac ces s o r ies
01.13
41
41
41
41
54
54
54
54
72
72
72
72
91
91
91
91
Handle
400 mm (15 3/4")
RETENTION RING
Spline
Square Drive Dia. mm
Dimensions mm
Spline
Y
Dia. mm D2
X
85
41
85
54
85
54
98
72
123
72
148
72
173
91
*Suggested for use
110
110
115
156
170
170
174
above
X
Item #
130 213893
130 218077
150 213916*
220 213892
220 213891
220 218074
220 213890
2000 N.m
X
Dimensions mm
Spline
Y
Dia. mm D2
X
41
54
72
72
72
91
85
85
98
123
148
173
65
80
105
105
105
105
240
240
240
240
240
240
Item #
213903
213905
213899
213900
213898
213897
X
REACTION
RING
Dimensions mm
Spline
Y
Dia. mm D2
X
Item #
85
41
65
28
213896
85
54
80
28
213917
98
72
110 33
213889
123
72
110 47
213904
148
72
110 47
213895
173
91
130 52
213894
275
**
57
180 213943
**For CLS1700, CLS2/4800, EF2000,
EF4000, EFW2000, EFW4000, HG80,
HSD2250
6 Pt. Impact Sockets
For use with Torque Multipliers
D2
L
C
T
Size
D1
3/4" SQUARE DRIVE
1" SQUARE DRIVE
Size
Item #
D1
Dimensions in.
D2
L
T
1
1 1/16
1 1/8
1 1/4
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 3/4
2
271686
271221
271631
271220
271632
271223
271633
271634
271225
271635
271232
1.614
1.732
1.732
1.929
2.047
2.047
2.126
2.244
2.244
2.480
2.874
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
2.126
1.890
2.047
2.047
2.047
2.165
2.205
2.283
2.283
2.283
2.480
2.598
0.512
0.512
0.650
0.650
0.748
0.748
0.866
0.866
0.866
0.995
1.062
1 1/2" SQUARE DRIVE
C
Size
Item #
D1
Dimensions in.
D2
L
T
0.890
1.047
1.047
1.047
1.165
1.205
1.283
1.283
1.283
1.480
1.598
2
2 1/16
2 1 /8
2 1 /4
2 3 /8
2 7/16
2 1 /2
2 9/16
2 5 /8
2 3/4
2 7/8
3
271614
271668
271708
271636
271709
271639
271640
271641
271642
271644
271710
271717
2.874
3.071
3.228
3.228
3.386
3.622
3.622
3.622
3.622
3.780
3.937
4.134
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
3.386
3.386
3.386
EF-SERIES
INLINE MULTIPLIER
with built-in controller
Page 01.5 & 01.6
2.756
2.953
2.953
3.071
3.543
3.543
3.543
3.543
3.661
3.740
3.740
3.780
1.062
1.181
1.181
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.614
1.732
C
Size
Item #
D1
1.631
1.828
1.828
1.946
2.418
2.418
2.418
2.458
2.536
2.615
2.615
2.655
2 3/8
2 1/2
2 9/16
2 5/8
2 3/4
2 7/8
3
3 1/8
3 3/16
3 1/4
3 3/8
3 7/16
3 1/2
272466
270818
270865
271711
272444
271712
272448
272445
271713
272446
271714
271715
271716
3.622
3.937
3.937
3.937
4.134
4.291
4.528
4.528
4.764
4.764
5.000
5.000
5.118
Dimensions in.
D2
L
T
3.386 3.740 1.378
3.386 3.740 1.378
3.386 3.740 1.378
3.386 3.937 1.496
3.386 3.937 1.496
3.386 4.134 1.614
3.386 4.331 1.732
3.386 4.331 1.770
3.386 4.724 1.850
3.386 4.724 1.850
3.386 4.724 1.930
3.386 4.724 1.930
3.386 4.724 1.930
C
2.115
2.115
2.115
2.312
2.312
2.509
2.706
2.706
3.099
3.099
3.099
3.099
3.099
HG
HAND MULTIPLIER
Ideal tool where air and
electricity aren t easily
accessible.
Page 01.10
6 PT. IMPACT
SOCKETS
01.14
TORQUE ANALYZER &
TEST MEASUREMENT
CATALOG - MC14
Ask a Mountz customer service representative
for a copy of our Torque Analyzer &
Test Measurement Catalog (24 page).
(Available in Print or PDF format)
Torque Analyzers and Transducers
Test Measurement Equipment
Multiplexer & Bar Code Reader
Accessories
CORPORATE HEADQUARTERS
1080 North 11th Street
San Jose CA 95112
t 408.292.2214
t 800.456.1828
f 408.292.2733
e-mail [email protected]
www.etorque.com
DISTRIBUTION & SERVICE CENTER
19051 Underwood Road
Foley AL 36535
t 251.943.4125
f 251.943.4979
US & CANADA SALES OFFICES
Anaheim, Boston, Charlotte, Chicago, Cleveland,
Dallas, El Paso, Los Angeles, Minneapolis, Nashville,
Phoenix, Seattle, San Jose, Toronto
MOUNTZ MEXICO SA de CV
MAIN OFFICE & SERVICE CENTER
ASSEMBLY POWER TOOL
CATALOG - MC14
Ask a Mountz customer service representative
for a copy of our Assembly Power Tool Catalog (76 page).
(Available in Print or PDF format only)
Hand Torque Screwdrivers
Electric Torque Screwdrivers
Transformers
Torque Screwdriver Accessories
Adapters, Bits, Bit Holders, Setters, Sockets
Av. Cristobal Colon #15343
Col. Paseos de Chihuahua
Chihuahua, Chih. Mexico CP 31125
t 614.481.0023
f 614.481.0053
MEXICO SALES OFFICES
Tijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey,
Mexico DF, Guadalajara
Moun t z MC14 ca t a l og Copy r igh t
2008 a l l r igh t s r ese r ved

Torque Multiplier

Transcription

Similar documents