shop tools - Marshall Distributing

SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
AXLE WRENCHES
PROTECTIVE
GEAR
MULTI-PURPOSE TOOL
This versatile tool is a must-have for on-the-trail repairs or adjustments. This
tool can be used to remove 8mm, 10mm, 12mm and 14mm bolts, #2 and
#3 Phillips screws, small and medium straight-slotted screws and 5 and
6mm hex bolts. It also includes a 1/4” and 3/8” socket driver for using the
10mm and 12mm sockets included with the tool. This tool’s versatility can be
enhanced by adding your own 1/4” or 3/8” drive socket attachments.
No. 11-6284-E0583
$58.95
These two tools fit over 50mm axle nuts. They feature a 1/2” drive slot for use
with a torque wrench or ratchet wrench. They are thin enough so they can
be used at the same time. Fits YFS200 Blaster ’88-03, YFB250 Timberwolf
’92-98, YFZ350 Banshee ’87-03, YFM350 Big Bear ’87-95 and YFM350X
Warrior ’87-03. Sold as pair.
No. 11-6289-P5262
Yamaha 50mm
$39.95 pr.
Wrenches are also available for Honda and Kawasaki models with the same
features as above.
No. 11-8996-P5772
No. 11-8997-P5252
Honda 41mm
Kawasaki 46mm
$42.95 pr.
38.95 pr.
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
AXLE WRENCHES
MULTI-VALVE TOOL
This tool is used to install the valve spring keepers without the need for a
valve spring compressor, making installation easy! Fits a 5mm valve stem
diameter or smaller. Not recommended for use on Harley-Davidson engines.
Made in USA.
• Fist most Honda TRX250X, TRX300E/X, TRX400E/X and TRX450R/ER.
• Made from heat-treated steel.
• Includes a 1/2 in. drive slot for use with a torque wrench or breaker bar.
No. 11-6285-E5437
No. 5132-P5772
$112.95
Honda 45.5mm/56mm
CONTROLS
UTV
ACCESS.
$42.95 pr.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
CV BOOT
BANDING TOOL
CHROME-MOLY HEX AXLE WRENCH
FRAME &
BODY
• Fits internal hex on many late model sportbike axles and some dirt bikes.
• Four metric hex sizes: 17,19, 22 and 24mm.
• 3/8” square drive on both ends (rated for maximum 90 ft. lbs. torque).
• Made from chrome moly steel.
• Used to easily install large or small clamps on CV Boot.
• Gives ability to tighten clamp securely and correctly for a proper seal to
keep moisture and contaminants out.
• Ratchet style allows maximum tension.
• Every tool box needs one of these.
No. 12-7982-E5471
No. 12-7777-E5764
www.marshalldistributing.com
$26.95
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$67.95
753
SHOP
TRAILER
MERCHANDISING
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
VALVE SPRING COMPRESSOR
TIRES/
WHEELS
Improved quick action design. Replaces 07757-0010000 and AKS-2151010 OEM tools. Accepts Motion Pro adapters (08-0248) as well as OEM
adapters 07GME-KT70200, 07JME-KY20100, and 07959-KM30101 for use
in “shim under bucket” and small diameter valve spring keeper applications.
Both cup-type and ball-type tips included.
EXHAUST
CHAINS &
SPROCKETS
MAGNETIC FINGER GLOVE
DRIVE
• Holds small metal objects.
• Great for starting or removing fasteners in hard to reach places.
• 2-way stretch spandex.
• Leatherette bottom and finger tip.
• Stretch finger panels.
BRAKES
No. 2114-P0594
Card of 6
No. 12-7073-E5937
No. 12-9473-E5622
$12.75 ea.
NYLON STARTER ROPE
ENGINE
Solid double braided nylon starter cord will last
longer than most original equipment’s loosely
woven ropes.
AIR/FUEL
MAGNETIC PARTS DISH
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
$113.95
34.95
Adaptor Set
This all-purpose magnetic dish is ideal for keeping track of loose fasteners
and other small parts. It prevents nuts and bolts from being lost or kicked
under your workbench. Attaches magnetically to any steel surface. Color:
Yellow
No. 11-6293-E0870
5” dia. x 1” deep
Order No.
453-E5901
454-E5600
456-E0931
457-E0800
458-E5201
459-E5900
Description
#6, 3/16”x200’
#6, 3/16”x6’ - order 10/bag
#7, 7/32”x200’
#7, 7/32”x6’ - order 10/bag
#8, 1/4”x100’ - Polaris
#8, 1/4”x6’ - order 10/bag
Retail
$.20 ft.
1.10 ea.
.25 ft.
1.35 ea.
.30 ft.
1.80 ea.
$11.95
SAFETY WIRE TWISTING PLIERS
LUGGAGE
For easy safety wire twisting with return spring mechanism.
No. M3816-E0581
RACKS &
ACCESS.
$30.95
7” long pliers
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
BALL JOINT SEPARATOR
Will not damage the A-arm, ball joint stud or rubber boot. Complete with
instructions. Designed to work on the following ATV models: Honda TRX250R
STAINLESS STEEL
’86-89, TRX250X ’87-88, ’91-92, TRX250 Recon ’97-01, TRX300EX ’93- • 1/4 lb. spool of safety wire.
01. Yamaha YFZ350 ’87-01 and YFM350X ’87-01
• .028” or .032” diameter wire.
4.5mm and 5.6mm Straight slot bit.
MERCHANDISING
No. 12-7046-E5721
754
All numbers in BLUE are new for this year.
$19.95
Ultra Dealers Buy For Less - Ask Us About It
No. 375-E0570
No. 376-E5960
SAFETY WIRE
$12.50
11.50
.028” diameter
.032” diameter
2012
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
TAPPET TOOL SET
ADJUSTABLE TORQUE WRENCH ADAPTER
• Torque any fastener with a combination wrench or Allen wrench.
• Will work with 6mm (1/4 in) through 19mm (3/4 in) combination wrenches.
• Will work with 6mm and 8mm Allen wrenches.
• Heat-treated steel with a black oxide finish.
• 3/8” square drive is rated for a maximum torque of 90 ft-lbs
No. 3122-E0423
PROTECTIVE
GEAR
$49.95
• Heat treated and chrome plated for durability.
• Set includes three wrenches, 8, 9 & 10mm and three adjusters: screw
type and 3 & 4 mm square-type.
• Interchange adjusters and wrenches for nine different combinations.
• Fits most motorcycles and ATVs with screw-type tappet adjusters.
No. 3115-E0552
TIRES/
WHEELS
EXHAUST
$39.95
CHAINS &
SPROCKETS
DRIVE
TAPPET FEELER GAUGE/SPARK PLUG GAP TOOL FOR KTM
• For checking intake and exhaust valve clearance (1.12mm/0.005”).
• For checking the spark plug gap (0.6mm/0.024in).
• Angled and tapered blade for easy access.
• Makes valve and spark plug gap adjustments quick and easy.
• Will fit all ’02-05 KTM 250/450/525 4-Strokes.
GEAR JAMMER
• Locks gears in place for easy installation and removal.
• Allows tightening lock nuts to proper torque setting.
• Works on virtually any motor.
• Powerful magnet holds tool in place during use.
• Billet 6061 T-6 aluminum construction.
• Blue anodized finish with laser engraved Motion Pro logo.
• Originally developed for removing and installing the primary gear on a
Honda CRF 450.
• Made in USA.
• Not for use with impact guns.
• Patented Design.
No. 12-8237-P5733
No. 3127-E5890
Allows accurate tappet adjustments. Angled blade for easy access to tappets. Makes valve adjustments quick and easy. Packed 6 per display card.
Made in the U.S.A.
$15.40
AIR/FUEL
$51.95
Card of 6
ELECTRICAL
TAPPET FEELER
GAUGES
BATTERIES
CONTROLS
12-7038-K0281
12-7039-K0391
12-7040-K0391
12-7041-K0391
sizes .002 -.003
sizes .004 -.005
sizes .006 -.008
Mixed set (2 of each)
$27.95 pkg.
29.95 pkg.
29.95 pkg.
29.95 pkg.
CAM GEAR HOLDER
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
Honda CRF450 and TRX450
• Allows you to easily torque the cam gear bolts on a 2002-2006 CRF450R/X
& 2004-2008 TRX450R/ER without a second person.
• Holds cam gear in place during removal and installation of cam gear bolts.
• Works on stock and aftermarket CRF450 & TRX450 cam gears.
• Reduces stress on cam chain and adjuster.
• Billet 6061 T-6 aluminum construction with hardened steel pin.
• Blue anodized finish with laser engraved Motion Pro logo.
• A must have tool for anyone doing motor work on a CRF450 & TRX450.
• Made in USA.
www.marshalldistributing.com
ENGINE
CHEMICALS
No.
No.
No.
No.
No. 3128-E5951
BRAKES
$24.95
FRAME &
BODY
SHOP
BALL END ALLEN SET
Made of chrome-vanadium tool steel. Sizes included: 1.5, 2, 2.5, 3, 4, 5, 6,
8 and 10mm. Ball end allows for better access to allen-head bolts (up to a
25º working angle). Includes a convenient holder.
No. 12-7059-K0511
9 piece set
$17.95 pkg.
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
755
TRAILER
MERCHANDISING
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
HEX-PRO SAE PIVOT HEAD HEX WRENCH
• 180 degree swivel head with extra long handle for accessing hard to reach
places.
• Kit includes 3/16, 7/32, 1/4, 5/16, and 3/8 inch wrenches.
• Pivot design allows for easy rotation around obstructions.
• Pivot design allows you to keep the wrench and fastener engaged when
access is limited.
• Great time saver.
• Heat treated alloy tool steel.
• Chrome plated finish.
• Includes heavy duty folding canvas storage pouch.
• Takes up less storage space than a typical hex key set.
No. 3124-K5213
5 piece
$46.95 ea.
90º 1/4” HEX DRIVER
• Precision made of aircraft grade aluminum and stainless steel.
• Designed for hard-to-reach areas and air/fuel mixture screws on multicylinder motorcycles.
• Gear driven 1/4 in. hex drive.
• Includes five 1/4 in. hex drive bits (all 1/2 in. long) - Straight-slot, Phillips,
D-shaped air/fuel mixture screw bit, 6mm hex jet bit & 1/4 in.-hex-to-1/4
in.-drive bit.
• Can be used with any 1/4 in. or 6mm hex bits.
• Strongest tool of its type on the market.
• Max torque is 60 in. lbs.
• 17.5 in. long.
• Replaceable drive gears.
• Limited 1-year warranty.
No. 3120-E5984
$74.95
BRAKES
ENGINE
T-HANDLE RATCHETS
Chrome-vanadium tool steel.
Compact design allows for use
in confined spaces. Reversible
ratchet and comfortable design.
Lifetime replacement warranty.
AIR/FUEL
HEX-PRO METRIC PIVOT HEAD HEX WRENCH
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
• 180 degree swivel head with extra long handle for accessing hard to reach
places.
• Kit includes 3, 4, 5, 6, 8, and 10 mm wrenches.
• Pivot design allows for easy rotation around obstructions.
• Pivot design allows you to keep the wrench and fastener engaged when
access is limited.
• Great time saver.
• Heat treated alloy tool steel.
• Chrome plated finish.
• Includes heavy duty folding canvas storage pouch.
• Takes up less storage space than a typical hex key set.
No. 3125-K5523
6 piece
$48.95 ea.
LUGGAGE
RACKS &
ACCESS.
STAR-PRO PIVOT HEAD TORX WRENCH
PLOWS & • 180 degree swivel head with extra long handle for accessing hard to reach
IMPLEMENTS
places.
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
No. 12-7063-E5941
22mm 3/8” DRIVE
SHORT SOCKET
• Super short (23mm high).
• 6 point chrome vanadium socket.
• Satin Chrome finish.
• Specifically designed to remove the front axle nut on the following applications.
Yamaha: YZ125 ’98-03, YZ250 ’98-03, YZ250F ’02-03, YZ400F ’98-99,
YZ426F ’00-02, YZ450 ’03.
No. 12-8260-E0240
• Kit includes T-25, T-27, T-30, T-40, T-45, T-50 wrenches.
• Pivot design allows for easy rotation around obstructions.
• Pivot design allows you to keep the wrench and fastener engaged when
access is limited.
• Great time saver.
• Heat treated alloy tool steel.
• Chrome plated finish.
• Includes heavy duty folding canvas storage pouch.
• Takes up less storage space than a typical hex key set.
No. 3126-K5373
756
6 piece
All numbers in BLUE are new for this year.
$55.95 ea.
Ultra Dealers Buy For Less - Ask Us About It
$22.95
1/4” drive
$6.55
DRIVE SOCKET
• 5/16” deep, 1/4” drive, 12-point socket.
• Developed specifically to work with all Motion
Pro bits.
• Chrome vanadium socket.
No. 12-7801-E0840
$7.50
2012
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
METRIC T-BAR DEEP SOCKETS
Great for the shop or home. Feature chrome vanadium tool steel, deep 6
point sockets, a carbon steel T-style handle and a nickel pewter finish. The
deep sockets allow for nuts to be driven over long threaded bolts. The hex
socket extends only part of the way inside, allowing the nut to be held in the
socket. Lifetime replacement warranty. Sold individually or in a complete set
of 7 sizes. The set includes “Hold-A-Nut” magnetic inserts. Custom aluminum
rack for hanging your set on is sold separately.
Order No.
11-4223-E5530
11-4224-E5930
11-4225-E0440
11-4226-E0440
11-4227-E0440
11-4228-E0460
11-4230-K5992
11-4231-E5801
Description
8mm
10mm
12mm
13mm
14mm
17mm
Set of 7 Sockets
Hanging rack
Retail
$5.55
6.20
6.85
6.85
6.85
9.95
45.95
16.95
T-HANDLE BALL-END ALLEN
• Use T-handle hex to tighten/loosen fasteners and ball-end hex on shaft for
quick installation/removal of fasteners.
• Ball end allows for better access to hard to reach allen-head bolts (up to
25-degree working angle)
• Compact 6-3/4” shaft fits in tight spaces and is easy to carry.
• Chrome-vanadium tool steel shaft and T-handle.
• Durable nickel pewter finish.
• Lifetime replacement warranty.
Order No.
12-8255-E0870
12-8256-E0870
12-8257-E0870
12-8258-E5780
12-8254-K5403
Description
4mm
5mm
6mm
8mm
Set of all 4
Retail
$11.95
11.95
11.95
13.50
46.95
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
T-BAR PHILLIPS SCREWDRIVERS
PLOWS &
IMPLEMENTS
The T-Bar Phillips screw-drivers feature chrome vanadium steel shafts with
Phillips bits in three sizes and a pewter finish. Sold individually or in a set.
Order No.
11-4232-E5930
11-4233-E0340
11-4234-E0940
12-7053-K5901
Description
Phillips #1
Phillips #2
Phillips #3
Set of all three
Retail
$6.25
6.70
7.60
16.95
T-HANDLE SOCKET DRIVERS
These easy-to-use tools allow optional ways to use any 1/4” or 3/8” drive
attachments such as sockets, hex drives, crow’s foot or swivels. Lifetime
replacement warranty.
Order No.
11-6287-E5950
11-6288-E0460
Description
1/4” drive, 8-1/2” long
3/8” drive, 10-1/2” long
Retail
$9.30
9.95
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
www.marshalldistributing.com
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
757
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TRI DRIVE MINI T-HANDLE
• Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick
installation/removal of fasteners.
• 1/4” drive has a compact 6” drive shaft length.
• Compact size fits in tight spaces and is easy to carry.
• Includes 8m, 10mm, 12mm and 13mm sock.
• Use with 1/4” drive socket, hex drives, crow’s foot, swivels, etc.
• Chrome-vanadium tool steel shaft and T-Handle.
• Durable nickel pewter finish.
• Lifetime replacement warranty.
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
3/8” SPINNER T-HANDLE
• 12” shaft length.
• High quality 3/8 inch drive T-handle.
• Knurled bearing mounted spinner provides faster and easier removal and
installation of bolts and nuts.
• Padded grip handle.
• Lifetime replacement warranty.
No. 5153-E0901
No. 12-8252-E5901
$16.95
$16.95
BIT FOR 5/16” T-HANDLE
Durable nickel pewter finish. A rubber o-ring keeps bit securely in place.
AIR/FUEL
4.5mm and 5.6mm Straight slot bit.
No. 12-7055-E5910
CHEMICALS
No. 12-8264-E0520
$3.40
3mm and 4mm Hex Bit.
$3.90
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
LUGGAGE
Impact resistant, ergonomic molded handle reduces hand fatigue. Use drive
side to tighten/loosen fasteners and shaft side for quick installation/removal
of fasteners. Use with 1/4” or 3/8” drive sockets, hex drives, crow’s foot,
swivels, etc. One piece chrome-vanadium tool steel shafts. Durable nickle
pewter finish. Lifetime replacement warranty.
Order No.
12-7085-E0370
12-7084-E5970
Description
1/4” drive, 7-5/8” long
3/8” drive, 7-5/8” long
Retail
$11.25
12.25
RACKS &
ACCESS.
HAND GRINDING WHEEL
Here is a new handy device for sharpening carbides right on the skis. This
thin, 4-1/2” wheel fits most hand grinders. 7/8” mounting hole. (Follow
manufacturers safety instructions).
PLOWS &
IMPLEMENTS
CARBIDE GRINDING WHEEL
FRAME &
BODY
T-Bar hex socket wrenches with chrome plating and rubber coated hand
grip. 10” long.
Special grade grinding wheel is designed for just sharpening carbide runners
and studs. It will maintain sharp edges and points or alter stud point angles.
Not recommended for general grinding. Six inch wheels are available in
1/2” or 1” widths. Includes arbor shim. (Follow manufacturers safety
instructions).
No. M3862-E5940
No. M3863-E5940
No. 11-3798-E5991
No. 11-3799-E0552
SHOP
TRAILER
MERCHANDISING
T-BAR DRIVERS
758
12mm
14mm
All numbers in BLUE are new for this year.
$8.25
8.25
Ultra Dealers Buy For Less - Ask Us About It
⁄2” x 6” Green wheel
1” x 6” Green wheel
1
2012
$28.95
36.95
SHOP
SHOP TOOLS
HELMETS
RING COMPRESSOR
Fits snugly on piston, yet quick release APPAREL
makes it easy to remove from around
connecting rod after cylinder is in position
EYE
on piston. Can be used on conventional PROTECTION
engines with narrow ring spacing. Range
2-1/8” to 5” (54-127mm).
PROTECTIVE
STONE-TYPE GLAZE BREAKER
Full 2” to 7” range (50.8-177.8 mm). Controlled pressure assures positive,
adjustable contact through full range. Three large stones provide more
cutting surface and assures quick removal of cylinder glaze. Adjustable stopcollar permits quick selection of two range settings, from 2” to 4” and from 4”
to 7”, and serves as safety stop if tool is extracted from cylinder while turning.
Operates with any electric drill. Easily compressed with one hand to eliminate
vertical scratches which might spoil the diamond cross-hatch pattern when
removing tool from cylinder. Furnished with 220 grit stones.
No. 8029-E5922
No. 8028-E5951
$24.95
TIRES/
WHEELS
EXHAUST
CIRCLIP INSTALLER
$37.95
REPLACEMENT STONE SETS
No. 8030-E5960
240 grit
$11.60
For use after reboring, not for glazebreaking.
No. 8031-E5960
240 grit
$11.60
For use with moly rings.
No. 8032-E5960
320 grit
$11.60
CHAINS &
SPROCKETS
Available in three different sizes. Easy installation tool for circlips. Saves time and headaches from dealing with pliers and
screw drivers! Significantly reduces damage done to the piston
during clip installation.
No. 12-8956-E5902
No. 12-8955-E5902
No. 12-8957-E5902
18mm
20mm
22mm
$34.95
34.95
34.95
Save by reducing ring breakage. Handles all
piston rings from 3/64” to 1/4”. Comes with PVC
coated handles. Made in USA.
DELUXE PISTON
PIN PULLER
No. 8027-E5950
$9.95
CHEMICALS
ELECTRICAL
UTV
ACCESS.
LUGGAGE
SNAP RING PLIERS
No. 11-1565-E5931
ENGINE
CONTROLS
$71.95
• Economical pliers that easily work with both inside and outside opening
snap rings or clips.
• Includes 3 extra sets of tips, 1 additional straight tip and 2 offset angled
tips.
PISTON PIN PULLER
BRAKES
BATTERIES
•Interchangeable piston adapters for use on both long skirt and short skirt
slipper pistons.
•Fits all piston pins from 12mm to 24mm.
• Made of 6061 aluminum with non marring aluminum adapters and durable
blue anodized finish.
• Patent pending.
Universal piston pin puller easily removes all sizes of pins without any damage to the piston.
DRIVE
AIR/FUEL
PISTON RING INSTALLER
No. 2600-E0764
GEAR
No. 3118-E5301
$16.25
$22.95
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
COMPRESSION TESTER
SHOP
TRAILER
Comes with 4 different plungers. 12.6mm, 14.8mm, 15.7mm and 18.7mm.
Easy-to-read gauge registers from 0-300 psi
and 0-2100 kpa. Fits both 14 and 18mm spark
plug thread sizes.
No. 12-8947-E5952
No. 8033-E5913
PISTON PIN PULLER
www.marshalldistributing.com
$42.95
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$49.95
759
MERCHANDISING
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
COMPRESSION TESTER
• Designed to check cylinder compression.
• Contains hoses for 10, 12 & 14mm spark plug applications.
• Features a quick disconnect with a pressure release valve and a 300 psi.
gauge.
• Packed in a convenient carry box, complete with instructions.
No. 3119-E0317
$109.95
SYNCPRO CARB TUNER
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
2 STROKE LEAK DOWN TESTER
• Designed to check for air leaks in 2-stroke engines.
• Includes air pressure gauge, pump-up bulb and most fittings and adapters
for single and twin cylinder 2-stroke motorcycle engines.
• Packed in a convenient carry box, complete with instructions
• Made in the U.S.A.
No. 3114-E07602
$308.95
BATTERIES
CONTROLS
• Precise four channel vacuum indicator designed specifically for intake
synchronization of engines with multiple carburetors or throttle bodies
(maximum vacuum rating for this tool is 40cm Hg).
• Mercury-free design uses non toxic manometer fluid.
• For use with any 2, 3 or 4 cylinder four stroke motorcycles.
• Spill proof design means the tool can be stored in a horizontal or vertical
position.
• Easy to read scale for precise synchronization.
• Unaffected by barometric pressure changes.
• Includes hang hook to clip onto the handlebars for easy use.
• Rugged, impact resistant ABS enclosure with convenient storage area for
adapters.
• Rubber feet on enclosure bottom helps prevent sliding.
• Includes manometer fluid, hoses, 5mm adapters, in-line restrictors and
instructions.
• 5mm adapters are used on many Honda and Suzuki models.
• Optional 6mm adapters are available for use on most Yamaha models.
• Most Kawasaki models do not need adapters.
• Patented Design.
• Accessories: 3113 6mm brass adapters Yamaha (set of 4).
No. 3123-E5746
No. 5098-K5930
$99.95
$5.95
REFILL KIT
UTV
ACCESS.
LUGGAGE
4 STROKE LEAK DOWN TESTER
RACKS &
ACCESS.
• Designed to check the amount of cylinder leakage in a 4-stroke engine.
PLOWS & • With an air source of 70 to 160 psi. this system will pressurize the cylinder
with 60 psi. of air.
IMPLEMENTS
• Gauge will register the total percentage of leakage past the rings, head
gasket, intake and exhaust valves.
FRAME &
• 10, 12, & 14mm spark plug thread hoses, regulator and gauge included.
BODY
• Speeds up troubleshooting and helps to isolate bad components.
• Made with high quality regulator and gauge. These cost more, but you get
SHOP
a better tool.
• Includes convenient carrying box.
• Instructions included.
TRAILER
• Made in the U.S.A.
MERCHANDISING
No. 3117-E03501
760
All numbers in BLUE are new for this year.
$161.95
Ultra Dealers Buy For Less - Ask Us About It
CARB ADAPTER SET
• Replacement carb adapter set for use with vacuum carb synchronization
tools.
• Includes 2 short and 2 long.
No. 5097-K5950
No. 3113-K5760
$9.95
10.50
5 mm
6 mm
2012
SHOP
MARSON KLIK-FAST®
STEEL RIVETS
Made in U.S.A.
Don’t settle for less - buy the best!
Order No.
Quantity
Retail/Ea.
Rivet size SBL6-6 - 3/16” dia. with 3/8” grip range
and 5/8” flange for track cleats.
257-P0560
$.15
100
258-P5913
500
259-P59421
3000
Rivet size SBL6-10 - 3/16” dia. with 5/8” grip range
and 5/8” flange for ice studs.
260-P0780
100
261-P5214
500
Rivet size SB5-4 - 5/32” dia. with 1/4” grip range,
used on Arctic Cat bodies.
255-P5430
100
256-P5461
500
Rivet size SB5-6 - 5/32” dia. with 3/8” grip range,
used on Arctic Cat slide (hyfax).
263-P5340
100
264-P0402
500
Rivet size SB6-8 - 3/16” dia. with 1/2” grip range,
small flange - Arctic Cat cleats with guides.
267-P0750
100
268-P5272
500
MARSON HEAVY
DUTY
HAND RIVETER
MODEL HP-2
HELMETS
APPAREL
EYE
PROTECTION
The most advanced industrial hand riveter available. Four nose
pieces for 3/32”, 1/8”, 5/32” and 3/16” rivets. Super-strong jaws,
positive grip and rugged construction throughout.
No. HP2-E5993
No. HP23-E0060
Hand Riveter
Replacement jaws
$59.95
9.95 pr.
CHAINS &
SPROCKETS
$.20
MARSON PHT-3
HEAVY DUTY AIR
HYDRAULIC
RIVETER
$.07
Rivet size AB5-6 - 5/32” dia. with 3/8” grip range,
used on Arctic Cat slide (hyfax).
278-P5340
100
279-P0402
500
Rivet size AB6-8 - 3/16” dia. with 1/2” grip range,
small flange - Arctic Cat cleats with guides.
280-E0880
100
281-E5914
500
www.marshalldistributing.com
DRIVE
BRAKES
ENGINE
$.09
PHT-3 is designed to work in close quarters such as riveting Arctic Cat
and Polaris cleats. Made in USA.
$.12
No. 11-8788-E59962
No. PHT3-25-K5992
1/8”, 5/32” and
3/16” rivets
Jaws (set of 3)
for PHT3
$379.95
49.95
$.09
$.20
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
LUGGAGE
$.20
$.07
AIR/FUEL
CHEMICALS
Order No.
Quantity
Retail/Ea.
Rivet size ABL6-6 - 3/16” dia. with 3/8” grip range
and 5/8” flange for track cleats.
269-P5260
$.15
100
270-P5992
500
271-P59531
3000
Rivet size AB5-4 - 5/32” dia. with 1/4” grip range,
used on Arctic Cat bodies.
276-P5430
100
277-P5461
500
TIRES/
WHEELS
EXHAUST
ALUMINUM RIVETS
Rivet size ABL6-10 - 3/16” dia. with 5/8” grip range
and 5/8” flange for ice studs.
272-P5980
100
273-P5924
500
PROTECTIVE
GEAR
IMPACT DRIVER
Vessel type impact driver in steel case with #2 and #3 Phillips plus
#8 and 10mm slotted bits.
No. 2500-E5501
Complete set
$17.50
Set of 4 short bits
Set of 4 long bits
PLOWS &
IMPLEMENTS
FRAME &
BODY
REPLACEMENT BITS
with 5/16” Hex Shaft
No. 2504-K5910
No. 2501-K0920
RACKS &
ACCESS.
SHOP
$3.25
4.95
TRAILER
MERCHANDISING
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
761
SHOP
EXHAUST HARDWARE
HELMETS
EXPANSION CHAMBER SPRINGS
Order 10 per bag.
8223
8221
8222
8229
APPAREL
8447
8766
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
HI-CARBON SPRING
Order No.
Retail
----------------------12-6676-E0510
$2.50
--11-0054-E5310
2.30
------7225-E0120
3.50
STAINLESS STEEL SPRING
Order No.
Retail
8221-E5700
$1.25
8222-E5800
1.45
8229-E5800
1.45
7275-E0510
2.50
8215-E0510
2.50
8227-E0510
2.50
8223-E5710
2.95
7277-E5710
2.95
7278-E5710
2.95
8228-E0010
1.65
7276-E5710
2.95
--8220-E0510
2.50
8232-E5710
2.95
8230-E5900
1.60
8440-E0120
3.50
8447-E0520
4.20
8766-E5920
4.95
SIZE
Length-Dia.
1-1/2” x 1/2”
1-3/4” x 1/2”
1-3/4” x 5/8”
2” x 1/2”
2” x 5/8”
2-1/4” x 1/2”
2-1/4” x 5/8”
2-5/16” x 13/32”
2-3/8” x 13/16”
2-1/2” x 5/8”
2-7/16” x 15/32”
2-9/16” x 5/8”
2-3/4” x 5/8”
4” x 1/2”
4” x 7/16”
4-1/4” x 9/16”
9-3/8” x 7/16”
10-7/8” x 7/16”
8232
8230
7275
7276
7277
7278
EXHAUST SPRING TOOLS
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
EXHAUST SPRING TOOL
This spring tool gives you better leverage to get to those hard to reach areas.
Use this tool to push, pull or twist springs into place. Made in the USA.
No. 89-3033-E5990
$14.95
A universal tool with coated handle and nickel chrome plated hook.
No. 11-8494-E5950
$9.95
BATTERIES
CONTROLS
UTV
ACCESS.
12-7043
SPRING HOOKS
12-7950
LUGGAGE
Used to remove exhaust pipe springs, seat or tank holding springs,
cotter pins, sidestand springs and other parts. Made in the U.S.A.
RACKS &
ACCESS.
No. 12-7043-E0370
No. 12-7950-E0701
Hook Handle
T-Handle, Heavy-duty
$11.25
16.95
EXHAUST SPRING TOOL
A universal tool with a durable PVC coated handle for comfort.
The push-pull feature makes those hard to reach places a snap.
No. 7266-E5980
$14.95
PLOWS &
IMPLEMENTS
FRAME &
BODY
TRAILER
MERCHANDISING
SPRING THING
SPRING HOOK
SHOP
An all purpose shop or home use tool. The spring steel wire hook will
remove exhaust pipe springs, tank or seat holding springs, cotter pins
and many other hard to access parts.
No. 11-2405-E5740
762
All numbers in BLUE are new for this year.
$7.95
Ultra Dealers Buy For Less - Ask Us About It
Precision cut from heavy gauge material for extreme durability and
longevity. The unique push-pull feature makes those hard to reach
places a snap. For comfort, a soft, but durable PVC coating to the
handle has been added.
No. 12-9225-E0211
$17.25
2012
SHOP
NITRO TAPE
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
Traditional Flames
Flaming Skulls
Euro Flames
SPECIAL EFFECTS GRAPHIC KITS
• Thin profile and design make these guaranteed not to peel off.
• Each kit contains six graphics for the left & right sides.
• All graphics cut separately for own custom application.
• Resists fading, fuel and scratches.
• Do-it-yourself, easy installation.
Order No.
11-8185-K5971
11-8186-K5971
11-8187-K5971
Description
Traditional Flames (4” x 19”)
Euro Flames (4” x 19”)
Flaming Skulls (4” x 19”)
Retail
$29.95
29.95
29.95
• Self-fusing silicone tape.
• Forms a permanent bond when wrapped round and back on itself.
• No adhesive residue.
• Operating temperature is -130°F to +500°F (continuous).
• Ultimate elongation 300%.
• Dielectric strength 400 volts per mil.
• Tensile strength 700 psi.
• Waterproof, resists UV, oil and corrosive chemicals.
• Temporarily repair leaking hoses, wrap wire harnesses many more uses.
No. 2865-E0550
No. 2864-E5997
$9.95
9.95
1” x 10’ Black
Display w/18 rolls
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
STICKER-ON!
Decal Application Fluid
AIR/FUEL
• No more bubbled, misaligned or wrinkled decals!
• Works on any pressure sensitive application, registration
numbers, graphic kits, sponsorship decals, number plate
backgrounds, racing numbers, OEM decals and more!
• Simply spray on the back of decal, slide and position it into
place; Sticker-On reactivates the adhesive when it cures.
• Environmentally friendly and comes in a convenient oz.,
push-pump, recyclable bottle.
No. 11-8178-E5830
$5.95
STICKER-OFF!
Decal Adhesive Remover Fluid
• Takes the frustration away from old decal removal.
• No more sticky residue left to mess up new decals.
• Works on any pressure sensitive application, registration
numbers, graphic kits, sponsorship decals, number plate
backgrounds, racing numbers, OEM decals and more!
• Apply onto adhesive residue, let it soften the adhesive for a
minute and then wipe clean with a dry, soft cloth.
• Environmentally friendly and comes in a convenient pushpump, recyclable bottle.
No. 11-8179-E5830
CHEMICALS
HIGH TEMPERATURE HEAT REFLECTIVE KITS
• Heat reflective film.
• Reflects 95% of the radiant energy.
• Provides heat protection up to 1050 degrees and higher for short durations.
• Minimum of 250 degree gradient temperature drop across the film (under
normal operation temps).
• Film incorporates patented fire resistant pressure sensitive adhesive that
incorporates a tear resistant woven mat.
• Perfect for Turbo applications.
• Great for custom builds.
• Guards against high heat areas.
• Works well for tuned pipe and/or custom tuned pipe fitment.
• Sticks to all surfaces.
No. 7452-K5923
No. 7453-K5915
$49.95
79.95
Small
Large
$5.95
CONTROLS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
FRAME &
BODY
SHOP
ELECTRICAL TAPE
Quality PVC electrical tape, UL listed.
3/4” wide x 60 ft. rolls. Sold each.
www.marshalldistributing.com
BATTERIES
PLOWS &
IMPLEMENTS
PACKAGING TAPE
No. 11-2277-E0210
ELECTRICAL
$1.95
Order No.
99-1002-E0030
99-1008-E0530
99-1003-E5940
Description
Polyseal tape, clear
Polyseal tape, tan
Label Protection, clear
Size
2” x 110 yds.
3” x 110 yds.
4” x 72 yds.
Retail
$4.95
5.50
7.95
All numbers in BLUE are new for this year
763
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
TRAILER
MERCHANDISING
SHOP
HELMETS
APPAREL
COLOR MATCHED
DUCT TAPE
EYE
PROTECTION
A product of 1001 uses! Designed to protect, repair or do whatever. Each roll
PROTECTIVE
measures 2”W x 90’L.
GEAR
•Keeps plastic parts looking like new.
•Emergency repairs.
TIRES/
•Color coordinated to your machine.
WHEELS
Order No.
Color
Retail
8706-E0550
$8.95
Purple
EXHAUST
8707-E0550
8.95
Std. Silver
8708-E0550
8.95
Red
8709-E0550
8.95
Yellow
CHAINS &
8.95
Green
SPROCKETS 8710-E0550
8711-E0550
8.95
Blue
8712-E0550
8.95
White
DRIVE
8713-E0550
8.95
Black
8714-E0550
8.95
Orange
BRAKES
ENGINE
CHECKERBOARD BARRICADE TAPE
No. 2883-E0512
CONTROLS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
TRAILER
MERCHANDISING
3” x 1000’
$34.95
ANGLED CHECKERBOARD TAPE
Checkerboard tape is a great item for all racers and their fans. Mostly used
for decoration and to gain attention to all areas. It is a vinyl tape laminated
with mylar and comes with a liner.
No. 2887-E0570
2” x 45’
$12.25
ALUMINUM FOIL HEAT PROTECTION TAPE
Dead soft aluminum foil tape has a high
performance acrylic adhesive system. 3.25
mil thickness with a removable paper liner.
Temperature range from -35° F to 300° F.
Extremely conformable to irregular surfaces. Great for plastic protection from aftermarket pipe installation’s or anywhere heat
is affecting your plastic. MX bikes, ATV’s,
Street Bikes, UTV’s, Snowmobiles, etc. Will
not work on direct contact of exhaust.
No. 2888-E0560
FRAME &
BODY
SHOP
$33.95
42.95
2” x 12’
4” x 12’
Mark off your pit spot or anywhere you don’t want you competitors to be. No
more hassles of saving spots with trash cans or cones. ** No Adhesive **
ELECTRICAL
BATTERIES
Surface Guard Tape is a clear protective urethane film that is virtually invisible to the naked eye. Surface Guard will protect any surface that is prone to
scratching, chipping, and weathering. A bullet proof, clear film that provides
indestructible protection. Surface Guard has a semi permanent adhesive,
with a removable release liner. Available in 8 mil thickness outdoor grade.
Surface Guard Tape provides excellent protection against ultra violet light,
temperature extremes and automotive solvents. Will not yellow over time.
Be sure to take note that our Surface Guard Tape is made of Polyurethane
Material, not PVC or Vinyl. These other types don’t conform well, and also
cannot, will not, take the abuse that polyurethane will.
8 - mil thickness - Crystal clear, thin, our most popular protection. Very
conformable, and easy to remove over time. Can be trimmed to fit any
application.
Applications for Surface Guard Tape are endless. From passenger vehicles,
bicycles, boats, semis, motorcycles, racecars, RV’s, street rods, snowmobiles, and everything in between, ISC’s Surface Guard can do the job.
No. 2884-E5702
No. 2885-E0562
AIR/FUEL
CHEMICALS
SURFACE GUARD /
HELICOPTER TAPE
3” x 25’
RUBBERIZED NON-SKID TAPE
$10.50
BLACK REFLECTIVE TAPE
• Blends in black during the day.
• Glows BRIGHT WHITE at night.
• Enhance visibility and ensure safety.
• Combo pack, 2 strips.
• 1: x 24: and 1/2: x 24: strip.
• Easy peel and stick adhesive.
No. 2877-E0360
764
2” x 45’
All numbers in BLUE are new for this year.
$10.25
Ultra Dealers Buy For Less - Ask Us About It
This rubberized traction tape with peel off backing is not as aggressive as
our original non-skid tape. Has a smoother rubber surface. Will not scratch
or ruin boots, gear, or leather when used for Off Road Motorcycles, ATV’s,
UTV’s, or Snowmobiles. Also great for bare feet traction on Boats, Jet Ski’s
and RV’s. Uses are endless. High strength peel and stick adhesive is made
to last for years. Rubberized Non-Skid is also a perfect solution for helping
to prevent slips and falls on most industrial and commercial applications for
pedestrians as well as being mop friendly. Come in colors of clear and black.
No.
No.
No.
No.
2878-E0590
2879-E0571
2880-E0590
2882-E0571
$15.75
28.50
15.75
28.50
2” x 75’ Black
4” x 75’ Black
2” x 75’ Clear
4” x 75’ Clear
2012
SHOP
HELMETS
APPAREL
EYE
PROTECTION
89-2009
89-2009
PROTECTIVE
GEAR
TIRES/
WHEELS
89-2008
BI-FOLD ATV RAMP
EXHAUST
• Wide design to accommodate newer quads.
• Measures 6’L x 47”W. • Folds in half.
• 6061 aluminum construction.
• Ultra heavy duty design. 1700lbs. tested.
• Rubber dipped angle ends to protect the tail gate.
• Includes safety tie straps.
ECONO CYLCE RAMPS
• Extruded 6061 aluminum.
• Rubber pad to help reduce slippage from tailgate.
• Tongue is welded to ramp.
• Color: Silver.
No. 89-2014-E59941
ATV Bi-Fold
CHAINS &
SPROCKETS
$199.95
Folding Ramp: 7’-7”L x 7”W, 400lbs. tested
No. 89-2008-E5997
$124.95
Silver
Non-Folding Ramp: 6’L x 7”W, 500lbs. tested
No. 89-2009-E5995
$94.95
Non-Folding, 2/pkg.
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
89-2010
ELECTRICAL
TRI-FOLD ATV/UTV RAMP
• Extra wide design to accommodate newer quads.
• Measures 6’L x 58.5”W”. • Compactly folds up.
• 6061 aluminum construction.
• Ultra heavy duty design. 1700lbs. tested.
• Rubber dipped angle ends to protect the tail gate.
• Includes safety tie straps.
No. 89-2013-E59451
ATV Tri-Fold
BATTERIES
CONTROLS
$209.95
UTV
ACCESS.
LUGGAGE
89-2011
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
HEAVY-DUTY CYLCE RAMPS
• Made from 6061 aluminum. • Folds in half.
• Plastic caps inserted in open ends.
• Rubber pad under top plate to reduce slippage of the ramp on the tailgate
of a truck.
• Measures 8-3/4” to 11”W x 7’6”L
• 750lbs. tested. • Color: Silver. • Sold each.
No. 89-2010-E59901
No. 89-2011-E5999
Folding Arch
Folding
www.marshalldistributing.com
$169.95
154.95
FRAME &
BODY
TRI-FOLD ATV RAMP
• Measures 6’L x 51”W”. • Compactly folds up: 17” wide folded.
• 6005 T-6 aluminum construction. • Weighs 28 lbs.
• Ultra heavy duty design. 1500lbs. tested.
• Rubber dipped angle ends to protect the tail gate.
• Includes safety tie straps.
No. 16-3582-E59451
ATV Tri-Fold
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
SHOP
TRAILER
$209.95
765
MERCHANDISING
SHOP
RACE CANOPIES
HELMETS
APPAREL
EYE
PROTECTION
Pro-Wheel race shades are high quality, 3 mil. aluminum frame canopies.
These shades are very light for packing. Each shade includes tie down stakes,
rope and carrying bag. Comes in 10’ x 10’, 10’ x 15’ and 10’ x 20’ sizes.
PROTECTIVE
GEAR
TIRES/
WHEELS
No. 16-2640-E59991
No. 16-2686-E59952
No. 16-2639-E59953
EXHAUST
CHAINS &
SPROCKETS
$279.95
369.95
499.95
10’ x 10’
10’ x 15’
10’ x 20’
KIDDE DRY
CHEMICAL FIRE EXTINGUISHERS
All featured models are UL listed, Coast Guard and D.O.T. approved.
DRIVE
Ideal fire protection for boats, automobiles and around the home.
* NOTE: Hazardous Materials Will Be Shipped Ground (NO EXCEPTIONS).
BRAKES
• U.S. Coast Guard approved.
• Exclusive pressure test indicator pin.
• Marine mounting bracket included.
• Non-corroding body, valve, and bracket.
• Non-rechargeable.
• Effective against fuel, grease, oil and electrical fires.
• Color: White
ENGINE
AIR/FUEL
Mariner 5P
CHEMICALS
• Charge weight: 2 lbs.
• UL rating: 5-B:C.
• Dim: 3-9/16” x 2-7/8” x 12-1/2”.
• Fits all PWC compartments (except Honda Aqua Trax).
• 2 year warranty.
ELECTRICAL
BATTERIES
No. *12-1020-E5961
CONTROLS
$26.95
Order 6/ctn.
Mariner 5
• Charge weight: 2 lbs.
• UL rating: 5-B:C.
• Dim: 4-5/16” x 3-5/16” x 11-1/8”.
• 6 year warranty.
UTV
ACCESS.
LUGGAGE
12-1020
12-1022
No. *12-1022-E5981
$29.95
Order 6/ctn.
HEARING PROTECTION
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
12-4446
12-4445
EAR PLUGS
EAR MUFFS
TRAILER
No. 12-4444-E5950
Yellow
$9.95
No. 12-4445-E0800
No. 12-4446-E5400
$1.35
.75
With case
MERCHANDISING
766
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
2012