Valves - Conex Bänninger

Valves
Valves
RVRX Series OS&Y Gate Valve
RVRX OS&Y Gate Valve
PN16 Flanged EN1171 Type
Applicable Standards:
Technical Data:
Valves comply with BS EN 1171
Size: DN50～DN300(2″～12″)
Flanges comply with BS EN 1092-2
Nominal pressure: PN 16
Face to face to BS EN 558-1 basic series 3
Temperature range: 0～80℃
Pressure test with BS EN12266-2003
Suitable for: Water and neutral liquids
Materials Specifications
No.
Features and Benefits:
Body
Bonnet
Wedge
Stem
Gasket
Wedge Nut
Yoke
Hand Wheel
Hand Wheet Nut
O-ring
Torques (Testing at 1.1PN Pressure)
• Outside stem and yoke, to see the ON/OFF position.
• 3 O-ring sealing, zero leakage, safe and reliable.
• Fully vulcanized wedge, corrosion resistant.
H
• Wedge with plastic guide rail on two sides, reduces
friction, reduces torque.
• Full bore, resilient seated, no water head lost.
D1 D2 D
• Electrostatically applied Akzo Nobel epoxy powder
internally and externally.
• Handwheel operated.
BS EN1171 OS&Y Gate Valve - RVRX
NO
28111070003
28111080003
Size
L
H
(open) (close)
DN
50
250
374
21/2″ 65
270
398
2″
unit:mm
D1
D2
D
n-φd
kg
Europe Code
Other Code
322
99
125
165
4-19
10.6
G0050CFDEH03DE
G0050CFDEH03DO
332
118
145
185
4-19
14.5
G0065CFDEH03DE
G0065CFDEH03DO
28111081005
3″
80
280
429
350
132
160
200
8-19
18.5
G0080CFDEH03DE
G0080CFDEH03DO
28111082003
4″ 100
300
524
420
156
180
220
8-19
22.3
G0100CFDEH03DE
G0100CFDEH03DO
28111090003
5″ 125
325
721
581
184
210
250
8-19
29
G0125CFDEH03DE
G0125CFDEH03DO
28111091003
6″ 150
350
736
581
211
240
285
8-23
36
G0150CFDEH03DE
G0150CFDEH03DO
28111092006
8″ 200
400
942
736
266
295
340
12-23
54.5
G0200CFDEH03DE
G0200CFDEH03DO
28111093006
10″ 250
450
1143
893
319
355
405
12-28
89
G0250CFDEH03DE
G0250CFDEH03DO
28111094006
12″ 300
500
1325
1022
370
410
460
12-28 118.5
G0300CFDEH03DE
G0300CFDEH03DO
Material
Component
1
2
3
4
5
6
7
8
9
10
Nominal Diamater
DN
50
65
80
100
125
150
200
250
300
350
400
450
500
600
Ductile Iron JS1040
Ductile Iron JS1040
Ductile Iron with EPDM Vulcanized
Stainless Steel SS420
EPDM
Brass2874 CZ 124
Ductile Iron JS1040
Ductile Iron JS1040
Brass2874 CZ 124
EPDM
unit: N.m
Nominal Pressure PN1.6MPa
Standard Torque
50
60
75
100
125
150
200
250
300
325
350
155
170
235
Nominal Pressure PN1.6MPa
Testing Torque
40
50
60
80
100
120
160
200
240
260
280
125
135
185
Note: The product testing torque is smaller than the standard requirement, easier to operated.
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.
Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal.
IBP trade marks are registered in numerous countries.
01/13
1
2