News 2015
Transcription
News 2015
Leben im Bad Living bathrooms News 2015 ALL PRICES IN US DOLLARS 14 August 2015 Important indications ceramics 1. Additions New series and models Series Remark Availability Cape Cod new series available DuraStyle Toilet wall mounted Basic rimless # 256209 August 2015 Furniture washbasin Compact # 233778 available Double furniture washbasin # 233813 available ME by Starck new series available Furniture washbasin # 233610 October 2015 Urinal rimless # 280931 October 2015 P3 Comforts new series available Furniture washbasin asym. left # 233385 August 2015 Starck 3 Toilet wall mounted rimless # 252709 available SensoWash Slim Shower toilet seat # 611000 00 1 00 1300 December 2015 # 611400 00 1 00 1300 December 2015 2. WonderGliss 2.1 Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long time to come. Thanks to the coating which is fired into the ceramics, water immediately contracts into drops and drips off, taking any other residuals substances (like e.g. lime) along. The result: less polluting deposits, less cleaning work - more fun in the bathroom! For more information please refer to www.duravit.us WonderGliss + USD 95 per piece Simply add a ´1´ to the model-no. 2.2 WonderGliss Standard The following series will include WonderGliss as a standard addition: Cape Cod 3. HygieneGlaze A high level of hygiene is required in the bathroom. Unwanted, sometimes even harmful bacteria and germs can collect in toilets in particular. Duravit has taken this issue on board and developed the innovative ceramic HygieneGlaze glaze, which defines a new standard of hygiene for toilets and urinals. The new development is not merely a surface coating but an antibacterial ceramic glaze that provides almost indefinite effectiveness. HygieneGlaze is integrated into the ceramic glaze during firing. Toilets and urinals that are available with HygieneGlaze are indicated accordingly. Please note that, due to the differing surface properties WonderGliss and HygieneGlaze cannot be combined. 4. Dimensions/Weights The indicated dimensions in inch always refer to width x depth. Mentioned weights are net (without packaging). 5. Special indications Ceramic When ordering please make sure that you use the correct model numbers: When ordering washbasins with three tap holes punched please indicate this by inserting „30“ in the 9th and 10th digit. When ordering items with WonderGliss-coating please add a „1“ as 11th digit. 045460 08 00 045460 08 30 045460 08 00 Color Model 1 WonderGliss Variant 610001 00 1 04 01 00 SensoWash® When ordering please make sure that you use the correct model numbers: Further information please see Model Color Variant in chapter SensoWash®. Voltage Configuration Plug 6. CAD drawings CAD data of Duravit sanitary ware can be downloaded from our internet website www.duravit.us or pro.duravit.us (DXF, DWG, IGS, STP format). 7. Guarantee Duravit AG grants a guarantee period of 5 years for all ceramic sanitary ware and acrylic ware. Duravit AG grants a guarantee period of 1 year for all whirlsystems, electronic toilet seats and accessories, providing that the installation is carried out by a certified plumber or electrician. 8. Symbols © 1.6 gal © 1.6/0.8 gal © 1.28 gal • ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ water saving 1.6 gpf water saving 1.6/0.8 gpf water saving 1.28 gpf without tap hole 1 tap hole punched 2 tap holes punched left and right for 2 taps 3 tap holes punched 2 tap holes punched with large distance between tap fittings 1 tap hole punched (left) 1 tap hole punched for soap dispenser (right) 1 tap hole punched (right) 1 tap hole punched for soap dispenser (left) 9. Tolerances All drawings are showing the necessary dimensions in mm / inch with standard tolerances. They are without obligation as proper dimensions can be taken from finished products only. Reprinting or duplicating, regardless of which method, also in extracts, has to be authorized by the manufacturer. With this pricelist all former prices of herein mentioned products become invalid. Our prices are only valid in connection with our terms of sale and delivery. We reserve the right to change the prices without prior notice. All prices do not include accessories. All prices are in USD. All dimensions and weights apply conditionally to the general tolerances. The content of this pricelist is made of 100% recycled paper. One more contribution to the environment protection. 2 PL 14_News_US Content Ceramics Cape Cod 7 DuraStyle8 ME by Starck 9 P3 Comforts 13 Starck 3 17 SensoWash® SensoWash® shower toilet seats SensoWash® Slim 25 SensoWash® suitable toilets ME by Starck SensoWash® toilets26 P3 Comforts SensoWash® toilets27 Accessories SensoWash®29 Bathtubs + Well Being Bathtubs Architec34 Cape Cod 38 D-Code42 P3 Comforts 44 Shower trays P3 Comforts 56 Stonetto62 Shower screens OpenSpace B 64 Bathroom furniture Cape Cod 76 DuraStyle79 L-Cube82 X-Large100 General information Important Indications Ceramics 2 SensoWash® Product Information 21 Important Indications Bathtubs + Well Being 33 Shower screens Product Information 63 Important Indications Bathroom Furniture 71 Ordering information and ordering guides bathroom furniture General Terms of Sale Color Chart from 107 119 from 120 PL 14_News_US 3 4 PL 14_News_US News 2015 Ceramics Cape Cod 7 DuraStyle8 ME by Starck 9 P3 Comforts 13 Starck 3 17 PL 14_News_US 5 6 PL 14_News_US Cape Cod Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 Washbowl without tap platform, without overflow 19 5/8“ • 19 5/8“ x 16“ 12.8 24 233950 00 001 655 Design Siphon * chrome 3.3 005036 10 92 215 Slotted waste chrome 2“ 0.7 005024 10 92 110 Infobox: * When using this siphon please observe outlet height from upper surface of finished floor to center of outlet in accordance with the technical specification sheet / Made of DuraCeram / Slotted waste is required for installation Washbowl with interior tap platform, without overflow 18 7/8“ ≤ ø 18 7/8“ 13.5 26 232848 00 001 695 Design Siphon * chrome 3.3 005036 10 92 215 Slotted waste chrome 2“ 0.7 005024 10 92 110 Infobox: * When using this siphon please observe outlet height from upper surface of finished floor to center of outlet in accordance with the technical specification sheet / Made of DuraCeram / Slotted waste is required for installation Washbowl with interior tap platform, without overflow 18 1/8“ ≤ 18 1/8“ x 18 1/8“ 16.3 26 234046 00 001 695 Design Siphon * chrome 3.3 005036 10 92 215 Slotted waste chrome 2“ 0.7 005024 10 92 110 Infobox: * When using this siphon please observe outlet height from upper surface of finished floor to center of outlet in accordance with the technical specification sheet / Made of DuraCeram / Slotted waste is required for installation WonderGliss ceramic surface finish PL 14_News_US 7 DuraStyle Design by Matteo Thun Description inch lbs Qty. Model-No. USD White - 00 Furniture washbasin compact with overflow, with tap platform 30 7/8“ ≤ 30 7/8“ x 15 3/4“ 40.6 12 233778 00 00 495 Space saving siphon white 005073 00 92 105 Infobox: Overview of furniture recommendation see page 107 Double furniture washbasin with overflow, with tap platform 51 1/8“ ≤ 51 1/8“ ≤ ≤ ≤ 51 1/8“ x 18 7/8“ 51 1/8“ x 18 7/8“ 72.7 72.7 8 8 233813 00 00 233813 00 30 995 995 Pedestal for # 231955, 231960, 231965, 232012, 232010, 232080, 232065, 232610, 232680, 232510, 232580, 233813 26.7 30 085829 00 00 145 Siphon cover for # 231955, 231960, 231965, 232012, 232010, 232080, 232065, 232610, 232680, 232510, 232580, 233813 15.7 40 085830 00 00 145 Fixing for siphon cover 0.2 005503 00 00 40 Infobox: For mounting ceramics larger than 47 1/4“, 2 sets of washbasin fixations are required / Overview of furniture recommendation see page 107 / When combined with pedestal or siphon cover, 2 of each are mandatory Toilet wall-mounted Basic Duravit Rimless® rimless, washdown model © 1.6/0.8 gal 14 3/8“ x 21 1/4“ 50.7 16 256209 00 92 270 Toilet seat and cover hinges stainless steel with slow close, removable 6.4 002079 00 00 190 Infobox: Optionally available with a standard seat and cover 8 PL 14_News_US WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. ME by Starck Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Washbasin with overflow, with tap platform 25 5/8“ ≤ 25 5/8“ ≤ ≤ ≤ 23 5/8“ ≤ 23 5/8“ ≤ ≤ ≤ 25 5/8“ x 19 1/4“ 25 5/8“ x 19 1/4“ 23 5/8“ x 18 1/8“ 23 5/8“ x 18 1/8“ 42.8 42.8 37.7 37.7 18 18 15 15 233565 00 00 233565 00 30 233560 00 00 233560 00 30 245 245 230 230 Pedestal for # 233565, 233560, 233683, 233610 6 7/8“ x 8 1/4“ 34.0 30 085839 00 00 225 Siphon cover for # 233565, 233560, 233683, 233610 6 3/4“ x 11 3/4“ 15.4 40 085840 00 00 165 Fixing for siphon cover 0.2 005503 00 00 40 Handrinse basin with overflow, with tap platform 17 3/4“ ≤ 17 3/4“ • 17 3/4“ x 12 5/8“ 17 3/4“ x 12 5/8“ 21.6 21.6 28 28 071945 00 00 071945 00 10 210 210 Siphon cover for # 071945 6 1/2“ x 9“ 11.2 48 085841 00 00 135 Fixing for siphon cover 0.2 005503 00 00 40 Washbowl with overflow, without tap platform, overflow clip chrome included, fixings included 21 5/8“ • 21 5/8“ x 16 1/2“ 26.5 21 033452 00 00 795 Pop-up basin waste chrome with horizontal lever** with vertical lever*** 2“ 2“ 1.1 1.1 005031 10 92 005051 10 92 110 110 Infobox: *** In combination with wall mounted tap and Duravit bathroom furniture / ** Required in conjunction with wallmounted tap fitting and consoles with a maximum thickness of 1 1/8“ / Overview of furniture recommendation see page 107 Washbowl with overflow, without tap platform, overflow clip chrome included, fixings included 16 1/2“ • 16 1/2“ x 16 1/2“ 17.6 21 033342 00 00 615 Pop-up basin waste chrome with horizontal lever** with vertical lever*** 2“ 2“ 1.1 1.1 005031 10 92 005051 10 92 110 110 Infobox: *** In combination with wall mounted tap and Duravit bathroom furniture / ** Required in conjunction with wallmounted tap fitting and consoles with a maximum thickness of 1 1/8“ / Overview of furniture recommendation see page 107 WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 9 ME by Starck Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Vanity basin undercounter basin, with overflow, without tap platform, fixings included 19 1/4“ • 19 1/4“ x 14 3/8“ 16.9 21 030549 00 00 220 Push-open waste *** chrome 2“ 0.8 005052 10 92 110 Infobox: Measurements of undercounter models represent interior measurements Vanity basin special ground for Duravit furniture, undercounter basin, with overflow, without tap platform 19 1/4“ • 19 1/4“ x 14 3/8“ 16.9 21 030549 00 22 325 Push-open waste *** chrome 2“ 0.8 005052 10 92 110 Infobox: *** Required in conjunction with wall mounted tap fitting, vanity unit and/or consoles / Measurements of undercounter models represent interior measurements / Undercounter basin only in combination with variable consoles and vanity units for undercounter basins, see recommendation of furniture on page 107. Available only in combination with console or vanity unit with attached washbasin / Not available in WonderGliss Furniture washbasin with overflow, with tap platform 40 1/2“ ≤ 40 1/2“ ≤ ≤ ≤ 32 5/8“ ≤ 32 5/8“ ≤ ≤ ≤ 40 1/2“ x 19 1/4“ 40 1/2“ x 19 1/4“ 32 5/8“ x 19 1/4“ 32 5/8“ x 19 1/4“ 7.3 5 57.3 46.7 46.7 8 8 8 8 233610 00 00 233610 00 30 233683 00 00 233683 00 30 885 885 620 620 Space saving siphon white 005073 00 92 105 Infobox: For vanity units the space saving siphon is recommended / Overview of furniture recommendation see page 107 Bidet wall-mounted ≤ with overflow, with tap platform Durafix included 14 3/8“ x 22 1/2“ 46.3 16 228815 00 00 375 Siphon for bidet with extended outlet pipe 1 1/4“ x 19 3/4“ 1.3 005027 00 92 40 0.4 006500 00 00 50 Fixing for wall-mounted bidet and wallmounted toilet caps white Ø 1/2“ x 7 1/8“ Infobox: Durafix for concealed fixation is included / If pre-wall carrier not used, the fixing # 006500 is recommended 10 PL 14_News_US WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. ME by Starck Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Bidet floor standing ≤ back-to-wall, with overflow, with tap platform fixings included 14 5/8“ x 23 5/8“ 55.1 9 228910 00 00 410 Siphon for bidet with extended outlet pipe 1 1/4“ x 19 3/4“ 1.3 005027 00 92 40 Toilet wall mounted Duravit Rimless® rimless, washdown model, Durafix included © 1.6/0.8 gal 14 3/8“ x 22 1/2“ © 1.6/0.8 gal, with HygieneGlaze 14 3/8“ x 22 1/2“ 57.3 57.3 16 16 252909 00 92 252909 20 92 550 620 Noise reduction gasket for wall-mounted toilet 0.7 005064 00 00 30 4.6 108 002001 00 00 100 4.6 108 002009 00 00 150 Toilet seat and cover hinges stainless steel without slow close removable, hinges stainless steel with slow close Infobox: Durafix for concealed fixation is included Two-piece toilet (without cistern), US version toilet, syphonic, 12“ rough-in, vertical outlet © 1.6/0.8 gal © 1.28 gal with HygieneGlaze © 1.6/0.8 gal © 1.28 gal 14 1/8“ x 28“ 14 1/8“ x 28“ 101.4 12 101.4 12 217101 00 00 217101 00 85 485 485 14 1/8“ x 28“ 14 1/8“ x 28“ 101.4 12 101.4 12 217101 20 00 217101 20 85 555 555 Mounting set for One-piece and Two-piece toilets 1/2‘‘, US-version 1.1 001417 00 00 110 28.2 40 093820 00 01 250 28.2 40 093820 00 85 250 4.9 4.9 002021 00 00 002029 00 00 80 120 Cistern with dual flush piston valve, top flush, for bottom left supply © 1.6/0.8 gal 15 3/8“ x 7 1/8“ with Single Flush piston valve, top flush © 1.28 gal 15 3/8“ x 7 1/8“ Toilet seat and cover elongated, hinges stainless steel without slow close with slow close, removable WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 11 ME by Starck Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Urinal Duravit Rimless® 0.13 gal Electronic-Urinal for battery supply, rimless, concealed inlet, syphonic action, horizontal outlet, fixings and complete control unit included model without fly model without fly, with HygieneGlaze Siphon 0.1 - 1.1 gal horizontal outlet (concealed) 12 PL 14_News_US ø 2“ WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. 280931 00 92 1,205 280931 20 92 1,275 0.4 005113 00 00 75 P3 Comforts Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Washbasin with overflow, with tap platform, overflow clip chrome included 25 5/8“ ≤ 25 5/8“ ≤ ≤ ≤ 23 5/8“ ≤ 23 5/8“ ≤ ≤ ≤ 25 5/8“ x 19 5/8“ 25 5/8“ x 19 5/8“ 23 5/8“ x 18 1/2“ 23 5/8“ x 18 1/2“ 39.7 39.7 37.5 37.5 18 18 15 15 233165 00 00 233165 00 30 233160 00 00 233160 00 30 340 340 300 300 Pedestal for # 233160, 233165, 233265, 233285, 233210, 233385, 233310, 233410 6 7/8“ x 8 1/4“ 34.0 30 085836 00 00 240 Siphon cover for # 233160, 233165, 233265, 233285, 233210, 233385, 233310, 233410 6 3/4“ x 11 3/4“ 15.4 40 085837 00 00 190 Fixing for siphon cover 0.2 005503 00 00 40 Handrinse basin without overflow, with tap platform 19 5/8“ ≤ 19 5/8“ • 19 5/8“ x 10 1/4“ 19 5/8“ x 10 1/4“ 19.6 19.6 40 40 071550 00 00 071550 00 70 250 250 Slotted waste chrome 2“ 0.7 005024 10 92 110 Infobox: Mandatory in combination with a bottle trap / Slotted waste is required for installation Handrinse basin with overflow, with tap platform, overflow clip chrome included 17 3/4“ ≤ 17 3/4“ • 17 3/4“ x 12 5/8“ 17 3/4“ x 12 5/8“ 18.7 18.7 28 28 071645 00 00 071645 00 60 230 230 Siphon cover for # 071645 6 1/2“ x 9“ 11.2 48 085838 00 00 175 Fixing for siphon cover 0.2 005503 00 00 40 Furniture washbasin with overflow, with tap platform, overflow clip chrome included 41 3/8“ ≤ 41 3/8“ ≤ ≤ ≤ 33 1/2“ ≤ 33 1/2“ ≤ ≤ ≤ 25 5/8“ ≤ 25 5/8“ ≤ ≤ ≤ 1 3/8“ x 19 5/8“ 4 41 3/8“ x 19 5/8“ 33 1/2“ x 19 5/8“ 33 1/2“ x 19 5/8“ 25 5/8“ x 19 5/8“ 25 5/8“ x 19 5/8“ 7.2 6 67.2 48.5 48.5 37.9 37.9 8 8 8 8 18 18 233210 00 00 233210 00 30 233285 00 00 233285 00 30 233265 00 00 233265 00 30 815 815 675 675 400 400 Space saving siphon white 005073 00 92 105 Infobox: For vanity units the space saving siphon is recommended / Overview of furniture recommendation see page 107 WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 13 P3 Comforts Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Furniture washbasin asymmetric with overflow, with tap platform, overflow clip chrome included, bowl on left side 41 3/8“ ≤ 41 3/8“ x 19 5/8“ 41 3/8“ ≤ ≤ ≤ 41 3/8“ x 19 5/8“ 33 1/2“ ≤ 33 1/2“ x 19 5/8“ 33 1/2“ ≤ ≤ ≤ 33 1/2“ x 19 5/8“ 59.5 59.5 56.0 56.0 8 8 8 8 233310 00 00 233310 00 30 233385 00 00 233385 00 30 885 885 675 675 Space saving siphon white 005073 00 92 105 Infobox: For vanity units the space saving siphon is recommended / Overview of furniture recommendation see page 107 Furniture washbasin asymmetric with overflow, with tap platform, overflow clip chrome included, bowl on right side 41 3/8“ ≤ 41 3/8“ x 19 5/8“ 41 3/8“ ≤ ≤ ≤ 41 3/8“ x 19 5/8“ 59.5 59.5 8 8 233410 00 00 233410 00 30 885 885 Space saving siphon white 005073 00 92 105 Infobox: For vanity units the space saving siphon is recommended / Overview of furniture recommendation see page 107 Vanity basin countertop basin, without overflow, without tap platform 21 5/8“ • 21 5/8“ x 14 1/8“ 17.0 28 037755 00 00 360 Slotted waste chrome 2“ 0.7 005024 10 92 110 Infobox: Overview of furniture recommendation see page 107 / Slotted waste is required for installation Vanity basin undercounter basin, with overflow, without tap platform, fixings included 19 1/4“ • 19 1/4“ x 14 3/8“ 16.9 21 030549 00 00 220 Push-open waste *** chrome 2“ 0.8 005052 10 92 110 Infobox: Measurements of undercounter models represent interior measurements / *** Required in conjunction with wall mounted tap fitting, vanity unit and/or consoles 14 PL 14_News_US WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. P3 Comforts Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Vanity basin special ground for Duravit furniture, undercounter basin, with overflow, without tap platform 19 1/4“ • 19 1/4“ x 14 3/8“ 16.9 21 030549 00 22 325 Push-open waste *** chrome 2“ 0.8 005052 10 92 110 Infobox: *** Required in conjunction with wall mounted tap fitting, vanity unit and/or consoles / Measurements of undercounter models represent interior measurements / Undercounter basin only in combination with variable consoles and vanity units for undercounter basins, see recommendation of furniture on page 107. Available only in combination with console or vanity unit with attached washbasin / Not available in WonderGliss Bidet wall-mounted ≤ with overflow, with tap platform, overflow clip chrome included Durafix included 15“ x 22 1/2“ 49.6 16 226815 00 00 400 Siphon for bidet with extended outlet pipe 1 1/4“ x 19 3/4“ 1.3 005027 00 92 40 0.4 006500 00 00 50 Fixing for wall-mounted bidet and wallmounted toilet caps white Ø 1/2“ x 7 1/8“ Infobox: Durafix for concealed fixation is included / If pre-wall carrier not used, the fixing # 006500 is recommended Bidet floor standing ≤ with overflow, with tap platform, overflow clip chrome included fixings included 15“ x 25 5/8“ 71.9 9 227310 00 00 420 Siphon for bidet with extended outlet pipe 1 1/4“ x 19 3/4“ 1.3 005027 00 92 40 Toilet wall mounted Duravit Rimless® rimless, washdown model, Durafix included © 1.6/0.8 gal 15“ x 22 1/2“ © 1.6/0.8 gal, with HygieneGlaze 15“ x 22 1/2“ 54.0 54.0 16 16 256109 00 92 256109 20 92 585 655 Toilet seat and cover hinges stainless steel without slow close with slow close, removable .9 4 4.9 108 108 002031 00 00 002039 00 00 165 250 Infobox: Durafix for concealed fixation is included WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 15 P3 Comforts Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Toilet floor standing Duravit Rimless® rimless, back-to-wall, fixings included, washdown model, horizontal outlet © 1.6/0.8 gal 15“ x 23 5/8“ © 1.6/0.8 gal, with HygieneGlaze 15“ x 23 5/8“ 75.6 75.6 9 9 216609 00 92 216609 20 92 525 590 Toilet seat and cover hinges stainless steel without slow close with slow close, removable .9 4 4.9 108 108 002031 00 00 002039 00 00 165 250 Two-piece toilet (without cistern), US version toilet, syphonic, 12“ rough-in, vertical outlet ©1 .6/0.8 gal © 1.28 gal 15“ x 18“ 15“ x 18“ 101.0 12 101.0 12 216801 00 00 216801 00 85 470 470 28.0 28 093720 00 01 250 28.0 28 093720 00 85 250 Cistern with dual flush piston valve, top flush, for bottom left supply © 1.6/0.8 gal 16 1/8“ x 6 3/4“ with Single Flush piston valve, top flush © 1.28 gal 16 1/8“ x 6 3/4“ 16 PL 14_News_US Mounting set for One-piece and Two-piece toilets 1/2‘‘, US-version 1.1 001417 00 00 110 Toilet seat and cover elongated, hinges stainless steel without slow close with slow close, removable 5.1 5.1 002051 00 00 002059 00 00 100 150 WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. Starck 3 Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 Toilet wall mounted Duravit Rimless® rimless, washdown model, Durafix included © 1.6/0.8 gal 14 1/8“ x 21 1/4“ 59.5 16 252709 00 92 515 Noise reduction gasket for wall-mounted toilet 0,7 005020 00 00 95 5.0 5.9 006381 00 00 006389 00 00 145 150 Toilet seat and cover hinges stainless steel without slow close with slow close, removable Infobox: Durafix for concealed fixation is included WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 17 18 PL 14_News_US News 2015 SensoWash® SensoWash® shower toilet seats SensoWash® Slim 25 SensoWash® suitable toilets ME by Starck SensoWash® toilets26 P3 Comforts SensoWash® toilets27 Accessories SensoWash®29 PL 14_News_US 19 20 PL 14_News_US SensoWash® Product Information SensoWash® represents a range of shower toilet seat with dedicated 'Rearwash' and 'Ladywash' functions. SensoWash®Slim ceramics conceal the connections supplying water and electricity. This makes installation simple. There are three stages, pre-installation, toilet installation and the mounting of the shower toilet seat. The functions themselves - from gentle cleansing to intelligent energy saving mode - offer maximum comfort with very easy operation, as all functions are remotely controlled. SensoWash® overview SensoWash® Slim ME by Starck ≤ P3 Comforts ≤ PL 14_News_US 21 SensoWash® Product Information SensoWash® Slim SensoWash® Slim shower toilet seat with concealed connections, suitable for series ME by Starck and P3 Comforts, Design by Duravit. Functions operated by remote control Rearwash Gentle and safe rear cleansing. Water spray intensity Water spray intensity can be adjusted to individual preference. Oscillating Comfortwash Forward and backward moving movement of spray wand during shower. Stop Rearwash, Ladywash and Comfortwash functions stop immediately. Ladywash Spray wand function for feminine cleansing. Water temperature Water temperature of shower functions can be individually adjusted. Spray wand position Spray wand position can be adjusted to individual preference. Increase / decrease function Adjustment of water spray intensity and temperature. Additional functions Automatic cleaning Spray wand and nozzle are cleaned automatically before and after use. Remote control Convenient and easy-to-use operating of shower toilet seat functions. Instant heater Continuous supply of heated water during shower functions. Automatic closure Silent closing seat and lid. Spray nozzle Spray nozzle detachable for cleaning and replacement. Blocking function via remote control No function can be used while this function is activated. Antimicrobial Antimicrobial properties of spray wand materials. Seat and lid easy removable one-handed Night light Illuminated inner bowl for night mode. Automatical drainage in periods of prolonged disuse All SensoWash functions mentioned above depend on the model. Details can be seen on the following chart or the description of the model. 22 PL 14_News_US SensoWash® Product Information SensoWash® Slim Seat Silent closing seat and lid Concealed connections - water / power ≤ ≤ Hygiene Automatic cleaning of spray wand and nozzle before and after use ≤ Antimicrobial properties of seat and nozzle materials ≤* Spray nozzle detachable for cleaning Complete unit removable for cleaning Seat and lid easy removable one-handed Automatical drainage in periods of prolonged disuse ≤ ≤ ≤ ≤ Cleanse Rearwash Ladywash Oscillating Comfortwash Adjustable spray wand position Adjustable water spray intensity Adjustable water temperature ≤ ≤ ≤ ≤ ≤ ≤ Comfort Night light function Remote control Blocking function via remote control Illuminated buttons with setting indication ≤ ≤ ≤ ≤ Specifications Shower water heated by instant heater Nominal voltage Frequency Maximum rating Water line pressure ≤ 120 V ~ 60 Hz 1050 W 0.07 - 0.75 MPa Temperature range Operating temperature 39 - 104 °F Water temperature 90 - 104 °F * only spray wand / An Electrical Leakage Protection to the bathroom socket is required prior to the installation of the product. PL 14_News_US 23 SensoWash® Recommendation for SensoWash® + Ceramic 24 Ceramic Ceramic type # 611400 Series # 611000 SensoWash®Slim ME by Starck # 252959 Toilet wall-mounted Rimless® ≤ ME by Starck # 216959 Toilet floor standing ≤ ME by Starck # 217151 Two-piece toilet ≤ P3 Comforts # 256159 Toilet wall-mounted Rimless® ≤ P3 Comforts # 216659 Toilet floor standing Rimless® ≤ P3 Comforts # 216851 Two-piece toilet ≤ PL 14_News_US SensoWash® Slim Design by Duravit Description inch lbs Qty. Model-No. USD White SensoWash Slim shower-toilet seat with concealed connections, remote control included, Locking function via remote control, rear-, front and oscillating wash, Individual adjustment of water temperature as well as spray wand position and water spray intensity, self-cleaning wand, with slow close, night light, Seat and lid easy removable one-handed, Automatic drainage in periods of prolonged disuse, on / off-button AC 120V 60Hz 14 3/4“ x 21 1/4“ 12.1 36 611000 00 1 00 1300 - 00 1,725 Infobox: Further information available at www.duravit.us / For suitable SensoWash toilets, please see matrix on page 24 SensoWash Slim shower-toilet seat with concealed connections, remote control included, Locking function via remote control, rear-, front and oscillating wash, Individual adjustment of water temperature as well as spray wand position and water spray intensity, self-cleaning wand, with slow close, night light, Seat and lid easy removable one-handed, Automatic drainage in periods of prolonged disuse, on / off-button AC 120V 60Hz 15 1/8“ x 21 1/4“ 12.1 36 611400 00 1 00 1300 1,725 Infobox: Further information available at www.duravit.us / For suitable SensoWash toilets, please see matrix on page 24 PL 14_News_US 25 ME by Starck SensoWash® WCs Design by Philippe Starck Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Toilet wall-mounted Duravit Rimless® rimless, washdown model, Durafix included, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included © 1.6/0.8 gal 14 3/8“ x 22 1/2“ © 1.6/0.8 gal, with HygieneGlaze 14 3/8“ x 22 1/2“ 57.3 57.3 16 16 252959 00 92 252959 20 92 755 825 Infobox: Choose suitable pre-installation kit or connecting set depending on used in-wall carrier. / Durafix for concealed fixation is included / Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 Toilet floor standing connecting elements for SensoWash with concealed connections included , back-to-wall, washdown model, only in combination with SensoWash, fixings included, horizontal outlet © 1.6/0.8 gal 14 5/8“ x 23 5/8“ © 1.6/0.8 gal, with HygieneGlaze 14 5/8“ x 23 5/8“ 63.9 63.9 9 9 216959 00 92 216959 20 92 700 760 Infobox: Choose suitable pre-installation kit or connecting set depending on used in-wall carrier. / Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 Two-piece toilet (without cistern), US version toilet, connecting elements for SensoWash with concealed connections included , only in combination with SensoWash, syphonic, 12“ rough-in, vertical outlet © 1.6/0.8 gal 14 1/8“ x 28“ © 1.28 gal 14 1/8“ x 28“ with HygieneGlaze © 1.6/0.8 gal 14 1/8“ x 28“ © 1.28 gal 14 1/8“ x 28“ 01.4 12 1 101.4 12 217151 00 00 217151 00 85 685 685 01.4 12 1 101.4 12 217151 20 00 217151 20 85 755 755 Mounting set for One-piece and Two-piece toilets 1/2‘‘, US-version 1.1 001417 00 00 110 28.2 40 093820 00 01 250 28.2 40 093820 00 85 250 Cistern for bottom left supply with dual flush piston valve, top flush, © 1.6/0.8 gal 15 3/8“ x 7 1/8“ with Single Flush piston valve, top flush, © 1.28 gal 15 3/8“ x 7 1/8“ Infobox: Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 26 PL 14_News_US WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. P3 Comforts SensoWash® WCs Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Toilet wall-mounted Duravit Rimless® rimless, washdown model, Durafix included, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included © 1.6/0.8 gal 15“ x 22 1/2“ © 1.6/0.8 gal, with HygieneGlaze 15“ x 22 1/2“ 54.0 54.0 16 16 256159 00 92 256159 20 92 800 865 Infobox: Choose suitable pre-installation kit or connecting set depending on used in-wall carrier. / Durafix for concealed fixation is included / Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 Toilet floor standing Duravit Rimless® rimless, back-to-wall, fixings included, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included , washdown model, horizontal outlet © 1.6/0.8 gal 15“ x 23 5/8“ © 1.6/0.8 gal, with HygieneGlaze 15“ x 23 5/8“ 75.6 75.6 9 9 216659 00 92 216659 20 92 655 720 Infobox: Choose suitable pre-installation kit or connecting set depending on used in-wall carrier. / Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. PL 14_News_US 27 P3 Comforts SensoWash® WCs Design by Phoenix Design Description inch lbs Qty. Model-No. USD White - 00 HygieneGlaze White - 20 Two-piece toilet (without cistern), connecting elements for SensoWash with concealed connections included , US version toilet, syphonic, only in combination with SensoWash, 12“ rough-in, vertical outlet © 1.6/0.8 gal 15“ x 28“ © 1.28 gal 15“ x 28“ Cistern with dual flush piston valve, top flush, for bottom left supply © 1.6/0.8 gal 16 1/8“ x 6 3/4“ with Single Flush piston valve, top flush © 1.28 gal 16 1/8“ x 6 3/4“ Mounting set for One-piece and Two-piece toilets 1/2‘‘, US-version 101.0 12 101.0 12 216851 00 00 216851 00 85 670 670 28.0 28 093720 00 01 250 28.0 28 093720 00 85 250 1.1 001417 00 00 110 Infobox: Further information available at www.duravit.us / For suitable SensoWash shower-toilet seats, please see matrix on page 24 28 PL 14_News_US WonderGliss + $ 95 per piece Simply add a ´1´ to the model-no. Accessories SensoWash® Description inch lbs Qty. Model-No. USD Pre-installation kit for in-wall carrier with horizontal support without shower toilet pre-installation/conduit pipe 005072 00 00 60 Connecting set for in-wall carriers with conduit pipe for connection inside the tank 100559 00 00 215 Connecting set for Geberit Monolith sanitary modules for WCs 100648 00 00 65 Infobox: Necessary during rough-in stage PL 14_News_US 29 30 PL 14_News_US News 2015 Bath- and whirltubs Architec34 Cape Cod 38 D-Code42 P3 Comforts 44 Shower trays P3 Comforts 56 Stonetto62 Shower screens OpenSpace B 64 PL 14_News_US 31 32 PL 14_News_US Important Indications Bathtubs + Well Being 1. Additions New series and models Series Remark Architec # 700407...90 - 700408...90 # 700407...91 - 700408...91 Cape Cod bathtubs D-Code # 700405 - 700406 OpenSpace B shower screen P3 Comforts bathtubs shower trays Stonetto shower trays 2. Discontinued items Surfaces Series Color code 2nd floor 67 Paiova 59, 62, 65, 67 Starck 50, 62, 65 Vero 50, 62, 65 3. Special indications When ordering bathtubs, whirltubs and pools please consider: Availability November 2015 Special Order available November 2015 available December 2015 available available Availability discontinued discontinued discontinued discontinued 710001 00 1 00 10 90 Model Color Module System System color When ordering your whirltub please indicate the item number of the module requested. Based on this information the exact item number will be determined by our sales service. When ordering a bathtub with panel the order number is made up from: bathtub item number + bathtub panel item number + colour 700079 00 0 00 0090 + 2F 8786 + Bleached Oak -65 4. CAD drawings CAD data of Duravit sanitary ware can be downloaded from our internet website www.duravit.us or pro.duravit.us (DXF, DWG, IGS, STP format). PL 14_News_US 33 Architec Design by Duravit Bathtub with panel height 19 1/4“ rectangle, with integrated panel and flange, drain right 1/4“ sanitary acrylic 10 1656 65 1/4” 30 1 1/8” 3/8” 20 470 18 1/2” 480 18 7/8” 520 20 1/2” 75 3” 402 15 7/8” 335 13 1/4” 52 2” 653 25 3/4” A 813 32 ” 3/8” 1093 43 ” 85 3 3/8” Length inch Width inch Depth/Height inch 1526 60 1/8” Capacity gal 290 11 3/8” 85 3 3/8” A 65 2 1/2” Weight lb Model-No. USD White Bathtub with panel height 19 1/4“ 66“ 32“ 18 7/8“ 39.4 105.8 Accessories for bath- and whirltub Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Chromed cover, fits 791255 00 0 00 1000 drain for Architec tubs # 700353 - 700356 and 700407 - 700408 Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Flange clips, 6 pcs., (included) Tub feet, 4 pieces, (included) 34 PL 14_News_US 3/4” 10 1676 66 ” - 00 700407 00 0 00 0090 885 791224 00 0 00 1000 185 791225 00 0 00 1000 300 791255 00 0 00 1000 790160 00 0 00 0000 790161 00 0 00 0000 545 40 75 Architec Design by Duravit Bathtub with panel height 20 3/8“ rectangle, with integrated panel and flange, drain right 1/4“ sanitary acrylic 10 1656 65 1/4” 50 470 18 1/2” 550 21 5/8” 480 18 7/8” 30 3/8” 85 3 3/8” Length inch Width inch Depth/Height inch 1526 60 1/8” Capacity gal 290 11 3/8” 85 3 3/8” A 1093 43 ” 65 2 1/2” Weight lb Model-No. USD White Bathtub with panel height 20 3/8“ 66“ 32“ 18 7/8“ 39.4 1 1/8” 75 3” 402 15 7/8” 335 13 1/4” 52 2” 653 25 3/4” A 813 32 ” 3/8” 2” 10 1676 66 ” 105.8 Accessories for bath- and whirltub Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Chromed cover, fits 791255 00 0 00 1000 drain for Architec tubs # 700353 - 700356 and 700407 - 700408 Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Flange clips, 6 pcs., (included) Tub feet, 4 pieces, (included) - 00 700407 00 0 00 0091 885 791224 00 0 00 1000 185 791225 00 0 00 1000 300 791255 00 0 00 1000 790160 00 0 00 0000 790164 00 0 00 0000 545 40 75 Infobox: Special order - available only upon request PL 14_News_US 35 Architec Design by Duravit Bathtub with panel height 19 1/4“ rectangle, with integrated panel and flange, drain left 1/4“ sanitary acrylic 20 1093 43 ” 65 2 1/2” Length inch Width inch Depth/Height inch 1526 60 1/8” Capacity gal 520 20 1/2” 480 18 7/8” 3/8” 290 11 3/8” 85 3 3/8” A 10 1656 65 1/4” 3/8” 3/4” 470 18 1/2” 75 3” 402 15 7/8” 335 13 1/4” 52 2” 653 25 3/4” A 813 32 ” 30 1 1/8” 10 1676 66 ” 85 3 3/8” Weight lb Model-No. USD White Bathtub with panel height 19 1/4“ 66“ 32“ 18 7/8“ 39.4 105.8 Accessories for bath- and whirltub Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Chromed cover, fits 791255 00 0 00 1000 drain for Architec tubs # 700353 - 700356 and 700407 - 700408 Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Flange clips, 6 pcs., (included) Tub feet, 4 pieces, (included) 36 PL 14_News_US - 00 700408 00 0 00 0090 885 791224 00 0 00 1000 185 791225 00 0 00 1000 300 791255 00 0 00 1000 790160 00 0 00 0000 790161 00 0 00 0000 545 40 75 Architec Design by Duravit Bathtub with panel height 20 3/8“ rectangle, with integrated panel and flange, drain left 1/4“ sanitary acrylic 10 10 3/8” 50 2” 550 21 5/8” 480 18 7/8” 30 1 1/8” 470 18 1/2” 402 15 7/8” 52 2” 653 25 3/4” 335 13 1/4” 813 32 ” A 1656 65 1/4” 3/8” 75 3” 1676 66 ” 1093 43 ” 65 2 1/2” Length inch Width inch Depth/Height inch 1526 60 1/8” Capacity gal 290 11 3/8” 85 3 3/8” A 85 3 3/8” Weight lb Model-No. USD White Bathtub with panel height 20 3/8“ 66“ 32“ 18 7/8“ 39.4 105.8 Accessories for bath- and whirltub Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Chromed cover, fits 791255 00 0 00 1000 drain for Architec tubs # 700353 - 700356 and 700407 - 700408 Waste and overflow, Plastic / Brass body drain, chrome, for Architec tubs # 700353 - 700356 and 700407 - 700408 Flange clips, 6 pcs., (included) Tub feet, 4 pieces, (included) - 00 700408 00 0 00 0091 885 791224 00 0 00 1000 185 791225 00 0 00 1000 300 791255 00 0 00 1000 790160 00 0 00 0000 790164 00 0 00 0000 545 40 75 Infobox: Special order - available only upon request PL 14_News_US 37 Cape Cod Design by Philippe Starck Bathtub freestanding, with seamless panel and support frame, with one backrest slope, with special waste and overflow DuraSolid A 118 4 5/8” ~ ~ 154 6 1/8” 1170 46 1/8” 612 24 1/8” Length inch Width inch Depth/Height inch 730 28 3/4” Capacity gal 625 24 5/8” 87 3 3/8” 507 20 ” 443 17 3/8” 885 34 7/8” 305 12 ” 505 19 7/8” 577 22 3/4” ~ ~ 52 2” 485 19 1/8” 1855 73 ” 1855 73 ” 878 34 1/2” 977 38 1/2” 154 6 1/8” 1547 60 7/8” 513 20 1/8” Weight lb Model-No. USD White Bathtub 73“ 38 PL 14_News_US 34 7/8“ 19 1/8“ 54.2 224.9 700330 00 0 00 0090 - 00 4,950 Cape Cod Design by Philippe Starck Bathtub, corner left, with seamless panel and support frame, with one backrest slope left, with special waste and overflow DuraSolid A 157 6 1/8” Length inch Width inch Depth/Height inch 730 28 3/4” Capacity gal 900 35 3/8” 157 6 1/8” 1743 68 5/8” 1190 46 7/8” 635 25 ” 645 25 3/8” 85 3 3/8” 60 2 3/8” 75 510 3 ” 20 1/8” 900 35 3/8” 450 17 3/4” 298 11 3/4” 305 12 ” 515 20 1/4” 743 29 1/4” 52 2” 485 19 1/8” 1900 74 3/4” 1900 74 3/4” 535 21 1/8” Weight lb Model-No. USD White Bathtub 74 3/4“ 35 3/8“ 19 1/8“ 54.2 231.5 700362 00 0 00 0090 - 00 4,390 PL 14_News_US 39 Cape Cod Design by Philippe Starck Bathtub, corner right, with seamless panel and support frame, with one backrest slope right, with special waste and overflow DuraSolid A 157 6 1/8” 60 2 3/8” 1190 46 7/8” 535 21 1/8” Length inch Width inch 157 6 1/8” Depth/Height inch 730 28 3/4” Capacity gal 900 35 3/8” 1743 68 5/8” 635 25 ” Weight lb Model-No. USD White Bathtub 74 3/4“ 40 PL 14_News_US 35 3/8“ 19 1/8“ 54.2 645 25 3/8” 485 19 1/8” 75 510 3 ” 20 1/8” 900 35 3/8” 450 17 3/4” 298 11 3/4” 305 12 ” 515 20 1/4” 743 29 1/4” 52 2” 85 3 3/8” 1900 74 3/4” 1900 74 3/4” 231.5 700363 00 0 00 0090 - 00 4,390 Cape Cod Design by Philippe Starck Bathtub back-to-wall, with seamless panel and support frame, with one backrest slope left, with special waste and overflow DuraSolid A 157 6 1/8” 60 2 3/8” 1190 46 7/8” 635 25 ” Length inch Width inch 157 6 1/8” Depth/Height inch 730 28 3/4” Capacity gal 1000 39 3/8” 645 25 3/8” 85 3 3/8” 75 510 3 ” 20 1/8” 900 35 3/8” 450 17 3/4” 298 11 3/4” 305 12 ” 515 20 1/4” 743 29 1/4” 52 2” 485 19 1/8” 1900 74 3/4” 1900 74 3/4” 900 35 3/8” 157 6 1/8” 1586 62 1/2” 535 21 1/8” Weight lb Model-No. USD White Bathtub 74 3/4“ 35 3/8“ 19 1/8“ 54.2 249.1 700364 00 0 00 0090 - 00 4,390 PL 14_News_US 41 D-Code Design by sieger design Bathtub rectangle, with integrated tile flange, drain right, built-in 1/4“ sanitary acrylic 30 1 1/8” 35 1 3/8” 407 16 ” 420 16 1/2” 813 32 ” 683 26 7/8” 52 2” 10 1504 59 1/4” 3/8” 400 15 3/4” 65 2 1/2” A 3/8” ~ 420 ~ 16 1/2” 10 1524 60 ” 65 2 1/2” 310 12 1/4” 970 38 1/4” 65 2 1/2” Length inch Width inch A 2 3/8” 1369 53 7/8” 95 3 3/4” 100 1359 53 1/2” Depth/Height inch 60 3 7/8” Capacity gal Weight lb Model-No. USD White Bathtub 60“ 32“ 17 3/4“ Accessories for bathtub Support frame (included) Waste and overflow, for central outlet, chrome 42 PL 14_News_US 37.0 72.8 - 00 700405 00 0 00 0090 735 790133 00 0 00 0000 790252 00 0 00 1000 150 210 D-Code Design by sieger design 30 1 1/8” 3/8” 1369 53 7/8” 2 3/8” 400 15 3/4” 52 2” 10 1504 59 1/4” 813 32 ” 420 16 1/2” 683 26 7/8” 407 16 ” A 3/8” ~ 420 ~ 16 1/2” 10 1524 60 ” 35 1 3/8” 65 2 1/2” Bathtub rectangle, with integrated tile flange, drain left, built-in 1/4“ sanitary acrylic 65 2 1/2” 310 12 1/4” A 100 3 7/8” Length inch Width inch 95 970 38 1/4” 3 3/4” 65 1359 53 1/2” Depth/Height inch 60 2 1/2” Capacity gal Weight lb Model-No. USD White Bathtub 60“ 32“ 17 3/4“ Accessories for bathtub Support frame (included) Waste and overflow, for central outlet, chrome 37.0 72.8 - 00 700406 00 0 00 0090 735 790133 00 0 00 0000 790252 00 0 00 1000 150 210 PL 14_News_US 43 P3 Comforts Design by Phoenix Design Depth/Height inch 1660 65 3/8” Capacity gal 75 3” 20 60 2 3/8” 1565 61 5/8” 3/4” Weight lb Model-No. USD White Bathtub 66 7/8“ 27 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 44 PL 14_News_US 5/8” 15 480 18 7/8” 460 18 1/8” 700 27 1/2” 355 14 ” 330 13 ” 7 1/8” 180 600 23 5/8” 20 3/4” 850 33 1/2” 1075 42 3/8” 3/4” Width inch ~ ~ 52 2” 20 Length inch 1700 66 7/8” 40 1 5/8” 1700 66 7/8” 7 1/2” 80 3 1/8” 190 Bathtub rectangle, built-in or for panel, with one backrest slope left 1/4“ sanitary acrylic 18 1/8“ 38.3 68.3 - 00 700373 00 0 00 0090 960 790011 00 0 00 0000 790219 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 220 220 155 65 P3 Comforts Design by Phoenix Design Depth/Height inch 1660 65 3/8” Capacity gal 15 60 2 3/8” 1565 61 5/8” 20 3/4” Weight lb Model-No. USD White Bathtub 66 7/8“ 29 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 5/8” 480 18 7/8” 460 18 1/8” 40 1 5/8” 850 33 1/2” 75 3” 1075 42 3/8” 20 Width inch 390 15 3/8” 52 2” 3/4” Length inch 1700 66 7/8” 750 29 1/2” 360 14 1/8” 180 7 1/8” 210 8 1/4” 630 24 3/4” 20 1700 66 7/8” ~ ~ 3/4” 100 3 7/8” Bathtub rectangle, built-in or for panel, with one backrest slope left 1/4“ sanitary acrylic 18 1/8“ 43.6 75.0 - 00 700375 00 0 00 0090 985 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 195 220 155 65 PL 14_News_US 45 P3 Comforts Design by Phoenix Design 15 5/8” 480 18 7/8” 460 18 1/8” 355 14 ” 330 13 ” 700 27 1/2” 600 23 5/8” 20 3/4” 180 7 1/8” 850 33 1/2” 1075 42 3/8” 3/4” Width inch ~ ~ 52 2” 20 Length inch 1700 66 7/8” 40 1 5/8” 1700 66 7/8” 190 7 1/2” 80 3 1/8” Bathtub rectangle, built-in or for panel, with one backrest slope right 1/4“ sanitary acrylic 20 1660 65 3/8” Depth/Height inch 60 2 3/8” 1565 61 5/8” 75 3” 3/4” Capacity gal Weight lb Model-No. USD White Bathtub 66 7/8“ 27 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 46 PL 14_News_US 18 1/8“ 38.3 68.3 - 00 700374 00 0 00 0090 960 790011 00 0 00 0000 790219 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 220 220 155 65 P3 Comforts Design by Phoenix Design Depth/Height inch 1660 65 3/8” Capacity gal 75 3” 1565 61 5/8” 20 3/4” Weight lb Model-No. USD White Bathtub 66 7/8“ 29 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 5/8” 15 480 18 7/8” 460 18 1/8” 40 1 5/8” 850 33 1/2” 60 2 3/8” 1075 42 3/8” 20 Width inch 390 15 3/8” 210 8 1/4” 360 14 1/8” 180 7 1/8” 52 2” 3/4” Length inch 1700 66 7/8” 750 29 1/2” 100 3 7/8” 630 24 3/4” 20 1700 66 7/8” ~ ~ 3/4” Bathtub rectangle, built-in or for panel, with one backrest slope right 1/4“ sanitary acrylic 18 1/8“ 43.6 75.0 - 00 700376 00 0 00 0090 985 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 195 220 155 65 PL 14_News_US 47 P3 Comforts Design by Phoenix Design 15 480 18 7/8” 460 18 1/8” 40 1 5/8” 415 16 3/8” 410 16 1/8” 180 7 1/8” 900 35 3/8” 75 3” 985 38 3/4” 20 Width inch 800 31 1/2” 680 26 3/4” 20 52 2” 3/4” Length inch 1800 70 7/8” ~ ~ 3/4” 100 3 7/8” 210 8 1/4” 1800 70 7/8” Depth/Height inch 1760 69 1/4” Capacity gal 75 3” 1650 65 ” 20 3/4” Weight lb Model-No. USD White Bathtub 70 7/8“ 31 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 48 PL 14_News_US 18 1/8“ 5/8” Bathtub rectangle, built-in or for panel, with two backrest slopes 1/4“ sanitary acrylic 49.1 79.4 - 00 700377 00 0 00 0090 1,075 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 195 220 155 65 P3 Comforts Design by Phoenix Design 15 460 18 1/8” 900 35 3/8” 510 20 1/8” 780 30 3/4” ~ ~ 52 2” 480 18 7/8” 40 1 5/8” 1900 74 3/4” 465 18 1/4” 100 3 7/8” 210 8 1/4” 1900 74 3/4” 5/8” Bathtub rectangle, built-in or for panel, with two backrest slopes 1/4“ sanitary acrylic 20 3/4” 180 7 1/8” 950 37 3/8” 1085 42 3/4” 20 3/4” Length inch Width inch 75 3” Depth/Height inch 20 1860 73 1/4” Capacity gal 75 3” 1750 68 7/8” 3/4” Weight lb Model-No. USD White Bathtub 74 3/4“ 35 3/8“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Support frame Bathtub anchors Suitable bathtub panels s.p. 55 18 1/8“ 66.0 79.4 - 00 700378 00 0 00 0090 1,290 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790108 00 0 00 0000 790103 00 0 00 0000 155 195 220 155 65 PL 14_News_US 49 P3 Comforts Design by Phoenix Design Bathtub corner left, with seamless acrylic panel and support frame, with two backrest slopes 1/4“ sanitary acrylic 120 4 3/4” 20 ~ ~ 985 38 3/4” 20 3/4” Length inch Width inch Depth/Height inch 1760 69 1/4” Capacity gal 460 18 1/8” 600 23 5/8” 15 480 18 7/8” 415 16 3/8” 410 16 1/8” 180 7 1/8” 800 31 1/2” 680 26 3/4” ~ 3/4” ~ 52 2” 1800 70 7/8” 5/8” 100 3 7/8” 210 8 1/4” 1800 70 7/8” 900 35 3/8” 20 3/4” Weight lb Model-No. USD White Bathtub 70 7/8“ 31 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Bathtub anchors Suitable bathtub panels s.p. 55 50 PL 14_News_US 18 1/8“ 48.6 196.2 - 00 700379 00 0 00 0090 3,535 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790103 00 0 00 0000 155 195 220 65 P3 Comforts Design by Phoenix Design 1800 70 7/8” ~ ~ 20 120 4 3/4” 985 38 3/4” 20 3/4” Length inch Width inch Depth/Height inch 1760 69 1/4” Capacity gal 600 23 5/8” 460 18 1/8” 15 480 18 7/8” 415 16 3/8” 410 16 1/8” 180 7 1/8” 800 31 1/2” 680 26 3/4” 52 2” ~ ~ 3/4” 100 3 7/8” 210 8 1/4” 1800 70 7/8” 5/8” Bathtub corner right, with seamless acrylic panel and support frame, with two backrest slopes 1/4“ sanitary acrylic 900 35 3/8” 20 3/4” Weight lb Model-No. USD White Bathtub 70 7/8“ 31 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Bathtub anchors Suitable bathtub panels s.p. 55 18 1/8“ 48.6 196.2 - 00 700380 00 0 00 0090 3,535 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790103 00 0 00 0000 155 195 220 65 PL 14_News_US 51 P3 Comforts Design by Phoenix Design 1800 70 7/8” ~ ~ 20 120 4 3/4” 985 38 3/4” 20 3/4” Length inch Width inch Depth/Height inch 1760 69 1/4” Capacity gal 600 23 5/8” 460 18 1/8” 15 5/8” 480 18 7/8” 415 16 3/8” 210 8 1/4” 410 16 1/8” 180 7 1/8” 52 2” 800 31 1/2” 100 3 7/8” 680 26 3/4” 1800 70 7/8” ~ ~ 3/4” Bathtub back-to-wall, with seamless acrylic panel and support frame, with two backrest slopes 1/4“ sanitary acrylic 900 35 3/8” 20 3/4” Weight lb Model-No. USD White Bathtub 70 7/8“ 31 1/2“ Accessories for bathtub Headrest, white Waste and overflow, chrome Tile flange Bathtub anchors Suitable bathtub panels s.p. 55 52 PL 14_News_US 18 1/8“ 48.6 222.7 - 00 700381 00 0 00 0090 3,740 790011 00 0 00 0000 790220 00 0 00 1000 790112 00 0 00 0000 790103 00 0 00 0000 155 195 220 65 P3 Comforts Accessories Design by Phoenix Design Description Headrest white, for P3 Comforts material: polyurethane Model-No. 790011 00 0 00 0000 USD 155 PL 14_News_US 53 P3 Comforts Design by Phoenix Design Product Information Panel 14 31 43 49 51 52 53 73 79 Acryl Pricegroup 1 82 Acrylic White Basic material: 3/8" Acryl solid-colored in white. Real wood veneer Pricegroup 2 13 American Walnut 24 Macassar 26 American Cherry Tree Basic material: High-density-fiberboard, with real wood veneer pressed on one side and laminate (HPL) pressed on other side. 05 12 69 71 72 Basic material: High-density-fiberboard, with real wood veneer pressed on one side and laminate (HPL) pressed on other side. Real wood veneer Pricegroup 3 Terra Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Ticino Cherry Tree Natural Walnut Oak Brushed Oak Brushed Walnut Mediterranean Oak Brushed Dark Oak All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist 54 PL 14_News_US Basic material: High-density-fiberboard, with laminate (HPL) pressed on both sides. Decor Pricegroup 1 Real wood veneer is a natural material, differences in color and structure may occur. Real wood veneer is a natural material, differences in color and structure may occur. P3 Comforts Design by Phoenix Design Description Panel for corner left for Tub # 700373 (66 7/8“ x 27 1/2“), for Tub # 700374 (66 7/8“ x 27 1/2“) for Tub # 700375 (66 7/8“ x 29 1/2“), for Tub # 700376 (66 7/8“ x 29 1/2“) for Tub # 700377 (70 7/8“ x 31 1/2“) for Tub # 700378 (74 3/4“ x 35 3/8“) inch Model-No. USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 66 1/2“ x 27 1/8“ P3 8786 1,190 1,615 1,880 66 1/2“ x 29 1/8“ 70 1/2“ x 31 1/8“ 74 3/8“ x 31 1/8“ P3 8787 P3 8788 P3 8906 1,190 1,190 1,255 1,615 1,615 1,710 1,880 1,880 1,995 Infobox: The included support frame is required for the installation of the panel / Heights of P3 Comforts series: Height bathtub panel = 21 7/8“, height bathtub panel incl. 3/4“ shadow gap = 22 5/8“, overall height incl. 1 5/8“ bathtub rim = 24 1/4“ Panel for corner right for Tub # 700373 (66 7/8“ x 27 1/2“), for Tub # 700374 (66 7/8“ x 27 1/2“) for Tub # 700375 (66 7/8“ x 29 1/2“), for Tub # 700376 (66 7/8“ x 29 1/2“) for Tub # 700377 (70 7/8“ x 31 1/2“) for Tub # 700378 (74 3/4“ x 35 3/8“) 66 1/2“ x 27 1/8“ P3 8781 1,190 1,615 1,880 66 1/2“ x 29 1/8“ 70 1/2“ x 31 1/8“ 74 3/8“ x 31 1/8“ P3 8782 P3 8783 P3 8904 1,190 1,190 1,255 1,615 1,615 1,710 1,880 1,880 1,995 Infobox: The included support frame is required for the installation of the panel / Heights of P3 Comforts series: Height bathtub panel = 21 7/8“, height bathtub panel incl. 3/4“ shadow gap = 22 5/8“, overall height incl. 1 5/8“ bathtub rim = 24 1/4“ Panel for back-to-wall version for Tub # 700373 (66 7/8“ x 27 1/2“), for Tub # 700374 (66 7/8“ x 27 1/2“) for Tub # 700375 (66 7/8“ x 29 1/2“), for Tub # 700376 (66 7/8“ x 29 1/2“) for Tub # 700377 (70 7/8“ x 31 1/2“) for Tub # 700378 (74 3/4“ x 35 3/8“) 66 1/2“ x 27 1/8“ P3 8776 1,550 1,870 2,140 66 1/2“ x 29 1/8“ 70 1/2“ x 31 1/8“ 74 3/8“ x 31 1/8“ P3 8777 P3 8778 P3 8902 1,550 1,550 1,630 1,870 1,870 1,960 2,140 2,140 2,245 Infobox: The included support frame is required for the installation of the panel / Heights of P3 Comforts series: Height bathtub panel = 21 7/8“, height bathtub panel incl. 3/4“ shadow gap = 22 5/8“, overall height incl. 1 5/8“ bathtub rim = 24 1/4“ Panel for niche (alcove) for Tub # 700373 (66 7/8“ x 27 1/2“), for Tub # 700374 (66 7/8“ x 27 1/2“), for Tub # 700375 (66 7/8“ x 29 1/2“), for Tub # 700376 (66 7/8“ x 29 1/2“) for Tub # 700377 (70 7/8“ x 31 1/2“) for Tub # 700378 (74 3/4“ x 35 3/8“) 66 1/2“ 70 1/2“ 74 3/8“ P3 8938 P3 8939 P3 8941 935 935 960 1,175 1,175 1,205 1,265 1,265 1,295 Infobox: The included support frame is required for the installation of the panel / Heights of P3 Comforts series: Height bathtub panel = 21 7/8“, height bathtub panel incl. 3/4“ shadow gap = 22 5/8“, overall height incl. 1 5/8“ bathtub rim = 24 1/4“ PL 14_News_US 55 P3 Comforts Design by Phoenix Design Product information Option of corner version Corner left Corner right P3 Comforts shower trays can be ordered as corner left or corner right version. The corner is taken from the perspective of a person standing in front of the shower tray. The person looks at the wide, evaluated shower tray rim. 56 PL 14_News_US P3 Comforts Design by Phoenix Design A 47 90 3 1/2” Length inch Width inch B 90 D 160 6 1/4” 1 7/8” 2” A 50 5 3/8” 138 Shower tray corner left, rectangle DuraSolid A 3 1/2” C Depth/Height inch Weight lb Model-No. USD White Shower tray 35 3/8“ 39 3/8“ 47 1/4“ 47 1/4“ 55 1/8“ 31 1/2“ 31 1/2“ 31 1/2“ 35 3/8“ 35 3/8“ Accessories for shower tray Stool, white matt Tile flange 1 3/4“ 1 3/4“ 1 3/4“ 1 3/4“ 1 3/4“ 41.9 44.1 55.1 61.7 63.9 - 00 720151 00 0 00 0000 720155 00 0 00 0000 720157 00 0 00 0000 720159 00 0 00 0000 720161 00 0 00 0000 965 1,045 1,100 1,140 1,225 791877 00 0 00 0000 790112 00 0 00 0000 515 220 PL 14_News_US 57 P3 Comforts Design by Phoenix Design 47 A 1 7/8” 50 2” 138 A 5 3/8” Shower tray corner right, rectangle DuraSolid A 90 3 1/2” B D C Length inch Width inch 90 3 1/2” 160 6 1/4” Depth/Height inch Weight lb Model-No. USD White Shower tray 35 3/8“ 39 3/8“ 47 1/4“ 47 1/4“ 55 1/8“ 31 1/2“ 31 1/2“ 31 1/2“ 35 3/8“ 35 3/8“ Accessories for shower tray Stool, white matt Tile flange 58 PL 14_News_US 1 3/4“ 1 3/4“ 1 3/4“ 1 3/4“ 1 3/4“ 41.8 44.1 55.1 61.7 63.9 - 00 720152 00 0 00 0000 720156 00 0 00 0000 720158 00 0 00 0000 720160 00 0 00 0000 720162 00 0 00 0000 965 1,045 1,100 1,140 1,225 791877 00 0 00 0000 790112 00 0 00 0000 515 220 P3 Comforts Design by Phoenix Design Length inch Width inch 900 35 3/8” 850 33 1/2” 90 3 1/2” 160 6 1/4” 900 35 3/8” 47 1 7/8” 900 35 3/8” 50 2” 138 5 3/8” Shower tray corner left, square DuraSolid A 90 3 1/2” 740 29 1/8” Depth/Height inch Weight lb Model-No. USD White Shower tray 35 3/8“ 35 3/8“ Accessories for shower tray Stool, white matt Tile flange 1 3/4“ 46.3 - 00 720153 00 0 00 0000 1,005 791877 00 0 00 0000 790112 00 0 00 0000 515 220 PL 14_News_US 59 P3 Comforts Design by Phoenix Design 47 1 7/8” 900 35 3/8” 138 5 3/8” 50 2” Shower tray corner right, square DuraSolid A 900 35 3/8” 90 3 1/2” 900 35 3/8” 850 33 1/2” 160 6 1/4” 740 29 1/8” Length inch Width inch 90 3 1/2” Depth/Height inch Weight lb Model-No. USD White Shower tray 35 3/8“ 35 3/8“ Accessories for shower tray Stool, white matt Tile flange 60 PL 14_News_US 1 3/4“ 46.3 - 00 720154 00 0 00 0000 1,000 791877 00 0 00 0000 790112 00 0 00 0000 515 220 P3 Comforts Accessories Design by Phoenix Design Description Stool white matt, height: 16 1/2“ for P3 Comforts shower trays Model-No. 791877 00 0 00 0000 USD 515 PL 14_News_US 61 Stonetto Design by EOOS Shower tray, rectangle DuraSolid Q A C 50 2” A 88 Length inch Width inch B 90 3 1/2” Depth/Height inch 3 1/2” Weight lb Model-No. USD White Sand Anthracite Shower tray 35 3/8“ 35 3/8“ 39 3/8“ 47 1/4“ 47 1/4“ 55 1/8“ 31 1/2“ 35 3/8“ 31 1/2“ 31 1/2“ 35 3/8“ 35 3/8“ Accessories for shower tray Tile flange 62 PL 14_News_US 2“ 2“ 2“ 2“ 2“ 2“ 67.3 67.3 67.3 79.4 86.0 98.1 - 38 - 48 - 68 720145 ._. 0 00 0000 720146 ._. 0 00 0000 720147 ._. 0 00 0000 720148 ._. 0 00 0000 720149 ._. 0 00 0000 720150 ._. 0 00 0000 1,075 1,130 1,170 1,240 1,280 1,375 790112 00 0 00 0000 220 Shower screen Product Information Tap side (example OpenSpace) The glass doors of OpenSpace can be folded away after use, allowing OpenSpace to transform into a discreet wall panel which tidily conceals tap fittings and shower attachments. The taps can be either positioned on the left or on the right side. The tap side is taken from the perspective of a person standing in front of the shower screen. For the type with tap left the deeper wall profile is assembled on the left. For the type with tap right the deeper wall profile is assembled on the right. Please consider this when ordering your OpenSpace / OpenSpace B shower screen. On site the tap side is no more changeable. Wall profile Wall profile Before ordering an Duravit shower screen check the structural conditions with the help of the pre-installation data sheet. left left right right Selection of taps The deeper wall profile is constructed for the assembly of taps. The tap parts on the wall can be up to 4 7/8" deep. Technical information OpenSpace/OpenSpace B complies with the technical requirements of the valid EN 14428. As a shower set consisting of shower bar and hand shower can have a depth of more than 4 7/8", a special quench holder with conical adapter is included in the delivery of every OpenSpace/OpenSpace B shower screen. Thus a multitude of standard hand showers are applicable and a clash of hand shower and glass folded towards the wall is avoided. Glass 3/8" toughened safety glass (OpenSpace B: 1/4") manufactured to EN 12150-1, transparent glass or optional mirror glass for tap side Profiles Aluminum, finish chrome optics high-gloss, with rise and fall hinge mechanism, 180° swivelling range, OpenSpace B: Cover in compact laminate Application area For shower trays or tiled shower areas Adjusting range Vertical tolerances up to 3/4" (OpenSpace B: 1") can be adjusted. Quench holder Chromed brass, included in delivery, only suitable for hand showers with conical adapter Door handle (only OpenSpace) Chromed ABS, included in delivery, optionally mountable Please consider the instructions in the pre-installation data sheet for the selection of your taps. Water-tightness The doors of OpenSpace/OpenSpace B directly rest on the shower tray or the tiled floor by the rise and fall hinge mechanism. Thereby a splash guard is largely achieved. Construction-conditioned, absolute water-tightness can’t be ensured for frameless glass shower screens that are sealed by means of flexible plastic sealing strips. Doors that can be opened outwards can cause water drops. Door handle (inside view) 30 7/8"* / 34 7/8" / 38 3/4" 5/8" 31 1/2"* / 35 3/8" / 39 3/8" OpenSpace/OpenSpace B square, tap left (for tap right mirror-inverted) * only OpenSpace 31 1/2"/ 35 3/8" 30 7/8" / 34 7/8" 31 1/2"* / 35 3/8" / 39 3/8" 34 7/8"/ 38 3/4" 5/8" 5/8" 30 7/8"*/34 7/8" /38 3/4" Installation dimensions The figures show the required installation dimensions of the shower tray / area (= measured length dimension and width dimension from tiled wall to the front edge of the installed shower tray / area) for the available dimensions of OpenSpace/OpenSpace B. The dimensions of OpenSpace/OpenSpace B consider that the shower screen is offset towards the inside by 5/8" from the outer edge of shower tray / area for the benefit of the water-tightness. 5/8" 35 3/8"/ 39 3/8" OpenSpace/OpenSpace B rectangle, tap left (for tap right mirror-inverted) PL 14_News_US 63 OpenSpace B Design by EOOS Shower screen rectangle, tap left A 15 5/8” 15 B 1970 77 1/2” 2000 78 3/4” A1 15 110 4 3/8” B1 60 2 3/8” 5/8” A1 5/8” 110 4 3/8” 15 B2 45 1 3/4” 125 4 7/8” 1970 77 1/2” 2000 78 3/4” B1 70 2 3/4” A5 60 2 3/8” 45 1 3/4” A3 A4 5/8” B A2 A Mounting area for taps/ accessories on the wall: Please consider the specified maximum projection for the areas F1 and F2. Description Length inch Width inch Height inch Weight lb Model-No. USD for shower tray 34 7/8“ x 30 7/8“ transparent glass, tap left transparent and mirror glass, tap left 34 7/8“ 34 7/8“ 30 7/8“ 30 7/8“ 78 3/4“ 78 3/4“ 147.7 147.7 770010 00 0 00 0000 770010 00 0 10 0000 2,705 3,130 for shower tray 38 3/4“ x 34 7/8“ transparent glass, tap left transparent and mirror glass, tap left 38 3/4“ 38 3/4“ 34 7/8“ 34 7/8“ 78 3/4“ 78 3/4“ 160.9 160.9 770012 00 0 00 0000 770012 00 0 10 0000 2,925 3,375 Infobox: The dimensions indicated for the shower trays refer to the installation dimensions, i.e. the measured length dimension and width dimension of the installed shower tray after tiling 64 PL 14_News_US OpenSpace B Design by EOOS Shower screen rectangle, tap right B 15 5/8” 15 A3 A5 A4 2000 78 3/4” 1970 77 1/2” 2000 78 3/4” B B1 1970 77 1/2” 70 2 3/4” 60 2 3/8” 45 1 3/4” 5/8” A A A2 110 4 3/8” A1 5/8” 15 15 110 4 3/8” 5/8” A1 B2 45 1 3/4” 125 4 7/8” 60 2 3/8” B1 Mounting area for taps/ accessories on the wall: Please consider the specified maximum projection for the areas F1 and F2. Description Length inch Width inch Height inch Weight lb Model-No. USD for shower tray 34 7/8“ x 30 7/8“ transparent glass, tap right transparent and mirror glass, tap right 34 7/8“ 34 7/8“ 30 7/8“ 30 7/8“ 78 3/4“ 78 3/4“ 147.7 147.7 770010 00 0 01 0000 770010 00 0 11 0000 2,705 3,130 for shower tray 38 3/4“ x 34 7/8“ transparent glass, tap right transparent and mirror glass, tap right 38 3/4“ 38 3/4“ 34 7/8“ 34 7/8“ 78 3/4“ 78 3/4“ 160.9 160.9 770012 00 0 01 0000 770012 00 0 11 0000 2,925 3,375 Infobox: The dimensions indicated for the shower trays refer to the installation dimensions, i.e. the measured length dimension and width dimension of the installed shower tray after tiling PL 14_News_US 65 OpenSpace B Design by EOOS Shower screen square, tap left 15 15 5/8” 1970 77 1/2” 2000 78 3/4” 110 4 3/8” 15 B1 A1 60 2 3/8” Mounting area for taps/ accessories on the wall: Please consider the specified maximum projection for the areas F1 and F2. Description Length inch Width inch Height inch Weight lb Model-No. USD for shower tray 34 7/8“ x 34 7/8“ transparent glass, tap left transparent and mirror glass, tap left 34 7/8“ 34 7/8“ 34 7/8“ 34 7/8“ 78 3/4“ 78 3/4“ 156.5 156.5 770008 00 0 00 0000 770008 00 0 10 0000 2,775 3,250 for shower tray 38 3/4“ x 38 3/4“ transparent glass, tap left transparent and mirror glass, tap left 38 3/4“ 38 3/4“ 38 3/4“ 38 3/4“ 78 3/4“ 78 3/4“ 165.3 165.3 770009 00 0 00 0000 770009 00 0 10 0000 2,990 3,400 Infobox: The dimensions indicated for the shower trays refer to the installation dimensions, i.e. the measured length dimension and width dimension of the installed shower tray after tiling 66 PL 14_News_US 5/8” A1 5/8” 110 4 3/8” 15 B2 45 1 3/4” B 1970 77 1/2” 70 2 3/4” 60 2 3/8” 2000 78 3/4” 125 4 7/8” 45 1 3/4” B1 B4 50 2” B3 A3 5/8” B A A2 A OpenSpace B Design by EOOS Shower screen square, tap right B 15 5/8” 15 2000 78 3/4” 1970 77 1/2” B 15 110 4 3/8” A1 5/8” 5/8” 110 4 3/8” 15 A1 B2 45 1 3/4” 2000 78 3/4” 125 4 7/8” 1970 77 1/2” 50 2” B4 A3 B3 70 2 3/4” 45 1 3/4” B1 60 2 3/8” A 5/8” A A2 60 2 3/8” B1 Mounting area for taps/ accessories on the wall: Please consider the specified maximum projection for the areas F1 and F2. Description Length inch Width inch Height inch Weight lb Model-No. USD for shower tray 34 7/8“ x 34 7/8“ transparent glass, tap right transparent and mirror glass, tap right 34 7/8“ 34 7/8“ 34 7/8“ 34 7/8“ 78 3/4“ 78 3/4“ 156.5 156.5 770008 00 0 01 0000 770008 00 0 11 0000 2,775 3,250 for shower tray 38 3/4“ x 38 3/4“ transparent glass, tap right transparent and mirror glass, tap right 38 3/4“ 38 3/4“ 38 3/4“ 38 3/4“ 78 3/4“ 78 3/4“ 165.3 165.3 770009 00 0 01 0000 770009 00 0 11 0000 2,990 3,400 Infobox: The dimensions indicated for the shower trays refer to the installation dimensions, i.e. the measured length dimension and width dimension of the installed shower tray after tiling PL 14_News_US 67 68 PL 14_News_US News 2015 Bathroom furniture Cape Cod 76 DuraStyle79 L-Cube82 X-Large100 PL 14_News_US 69 70 PL 14_News_US Important Indications Bathroom Furniture 1. Additions Extension of surfaces Series Color code Availability Darling New 12, 13, 22, 26, 40, 43, 49, 52, 53, 69, 71, 72, 73, 79, 03, 10, 20, 27, 38, 40, 47, 61, 85, 86, 87, 89, 90; Interior color: 57 Black Diamond available Delos 13, 14, 18, 22, 26, 31, 40, 43, 49, 51, 52, 53, 71, 72, 73, 79, 03, 10, 20, 27, 38, 40, 47, 61, 86,87, 89, 90 available DuraStyle 14, 22, 31, 49, 51, 73, 79 Interior color: 57 Black Diamond available Fogo 12, 14, 18, 22, 31, 40, 43, 49, 51, 52, 53, 69, 71, 72, 73, 79, 03, 10, 20, 27, 38, 40, 47, 61, 85, 86, 87, 89, 90; Interior color: 57 Black Diamond available Ketho 14, 22, 31, 51, 52, 53, 73, 79; Interior color: 57 Black Diamond available Vero 12, 13, 14, 18, 22, 26, 31, 40, 43, 49, 51, 52, 79, 03, 10, 20, 27, 38, 40, 47, 61, 85, 86, 87, 89, 90 available X-Large 13, 14, 26, 31, 40, 43, 49, 51, 52, 69, 71, 72, 73, 03, 10, 20, 27, 38, 40, 47, 61, 87, 89, 90; Interior color: 57 Black Diamond available Other Furniture series Interior color: 57 Black Diamond replaces interior color 37 White Aluminum Rolling change Flat plugs will replace junction boxes for mirrors and mirror cabinets Rolling change New models Series Cape Cod DuraStyle L-Cube X-Large Remark new series Vanity unit # DS DS 6399, 6499 new series Vanity unit # XL 6516 - XL 6518, # XL 6535-XL 6538, XL 6543-XL 6545, # XL 6553-XL 6555, XL 6810-XL 6811 Plinth leg # UV 9991, UV 9992 Availability available available available 4. Ordering system Duravit 4.1. Individual specifications - series - front color - body color - color for consoles, countertops and shelves 4.2. Model-related specifications - model number - door hinges L = hinge on the left side R = hinge on the right side 0 = no hinge - position of washbasin L = washbasin on the left side R = washbasin on the right side M = washbasin centered B = washbasin on both sides - for variable models, indication of the width - model-no. ceramic for consoles - position low cabinets or vanity units for consoles 4.3. Drawings, sketches Detailed drawings for ordering of countertops or variable consoles are absolutely necessary. Please use order sheet and check list. 5. Warranty Duravit grants a warranty period of 5 years for all ceramic sanitary ware, 5 years for all bathroom furniture, providing that the installation is carried out by a certified plumber. Please note that parts subject to wear and tear are excluded. available available 2. Series with Bicolor surfaces (DuraStyle / Darling New) Articles, ordered with different front- and body colors from two different pricegroups (bi-color), will be charged with the higher of both pricegroups. 3. Structure of the pricelist All models are type-ordered. Type-number consists of: XL 1135 L 22 22 previous ord. no. front identifica- hinges / tion code position of for series washbasin body Note: Please indicate the „0“ at the according point for models without hinges. Please set the body color as well as front color for models without a front. model-no. = identification code for series + previous ord. no. If furniture are offered in various colors, all necessary information for the ordering process are mentioned in an ordering example. PL 14_News_US 71 Bathroom Furniture Product Specifications All furniture parts correspond in construction and workmanship to the requirements laid down in DIN 68935 and the E1 directive ontoxic substances with regard to formaldehyde emissions. I. Technical Product Specifications 1. Panel for mirror ground plate, body and rear panel These are 1 1/2", 3/4", 5/8" and 3/8" thick, back panels are set in grooves, recessed and bond. Further information is available in the detailed product information for the various series. 2. Real wood veneer Fronts, Bodies, Consoles, Shelf under washbasin trim, Washbasin trims: Possible variations concerning structure, veining, pores and color are manifestations of the genuineness of the natural material wood and preclude any cause for complaint. Further information can be obtained from the detailed product information for the individual series. 3. Consoles Detailed information is included in the description of the individual series. 4. Shelves Glass shelves, thickness: 1/4", height-adjustable. 5. Drawers 5.1. Drawers for series 2nd floor, Darling New, DuraStyle, Fogo, Ketho, PuraVida, Starck, X-Large Silver steel frames; roller guide with extended self-closing action; strong lateral support; casters of noise-reducing plastic; steel guide tracks. Two dimensional adjustment of the drawer’s c overing is possible. Elegant cover of the adjusting mechanism with DURAVIT logo. Base and rear panel in the color of the body; drawers can be easily r emoved for cleaning purposes. 5.2. Drawers for Delos, Happy D.2, L-Cube and Vero Anthracite colored stell frames; roller guide with extended self-closing action; strong lateral support; casters of noise-reducing plastic; steel guide tracks. Three-dimensional adjustment of the drawers's covering possible. Elegant cover of the adjusting mechanism with DURAVIT logo. Base and rear panel in the coloir of the body; drawers can be easily removed for cleaning purposes. The interior system is optional. 6. Hinges Full metal hinges with three-dimensional adjustment. 107° opening angle. Doors are easily unhinged. Thanks to clip-on mechanism, no tools are necessary. Elegant cover with DURAVIT logo. 7. Suspension brackets 7.1. Cabinet suspension Concealed by the rear panel, easy to adjust two-dimensionally. Maximum load 143 lbs each, with slip-resistant combination hook for track and hook suspension. 7.2. Mirror suspension Height-adjustable fixing; integrated in the mirror’s rear panel. 72 PL 14_News_US 7.3. Washbasin vanity unit suspension Easily adjustable in two dimensions; maximum load 143 lbs each, with slip-resistant combination hook for track and hook suspension. After the adjustment, vanity units with a width of more than 39 3/8" are protected additionally by a special fixing. 8. Wire articles Glossy chrome-plated finish of railings and removable laundry basket. 9. Crystal mirrors Ground and polished edges; high quality standards exceeding DIN 1238. Crystal mirrors ought to be cleaned only with a soft and dry cloth; wipe off marks with a slightly damp cloth or chamois leather; window cleanser and other acrid cleaning agents can damage the silver coating and preclude any cause for complaint. 10. Interior System Interior modules are factory installed and must be requested upon ordering. The interior system with a material mix in acryl glass and solid wood is available in maple or walnut. There is an individually designed interior system for each cabinet width between 21 5/8" - 47 1/4". There are always two boxes and one box cover in the interior systems for drawers with or without siphon cut-out plus a small tray wave system for cosmetic products. A special field for a hair dryer is integrated off a width of 29 1/2". The interior system for drawer without siphon cut-out includes always a big tray wave system to lay in bigger bottles. Off a width of 31 1/2" there is also an special field for a hair dryer integrated. The interior system for a pull-out compartment (Delos, Happy D.2 and L-Cube) always includes a support for hair brushes and comb. The interior system for a pull-out compartment (Vero) is available off a width of 29 1/2". There is a wood grid to fix bottles off a width of 29 1/2". Each size of the cabinet have a individual layout of the interior systems to use the optimum storage space. The bottom, the box cover the small and big wave plus the special support for hair brushes and comb have a special anti-slip lacquer. II. Mounting Aids 1. Mounting accessories Screws, dowels, cover caps and installation tracks are included with the respective model. Installation only by skilled professionals. Provided screws and dowels have to be reviewed for applicability in appropriate wall, if necessary they have to be replaced by capable material on site. 2. Mounting and care instructions Are included in the respective consignment. Mirrors / Mirror Cabinets Series Furniture Model type PL 14 - June 2015 Stock articles June 2015 New - July 2015 New - July 2015 Junction Box for wall connection Junction Box for wall connection Flat plug for wall connection New sensor switch Cape Cod # CC 9641 Mirror ≤ ≤ Darling New # DN 7255 Mirror ≤ ≤ ≤ ≤ Darling New # DN 7256 Mirror ≤ ≤ ≤ ≤ Darling New # DN 7257 Mirror ≤ ≤ ≤ ≤ Darling New # DN 7258 Mirror ≤ ≤ ≤ Darling New # DN 7265 Mirror ≤ ≤ ≤ Darling New # DN 7275 Mirror ≤ ≤ ≤ ≤ Darling New # DN 7276 Mirror ≤ ≤ ≤ ≤ Darling New # DN 7277 Mirror ≤ ≤ ≤ Darling New # DN 7278 Mirror ≤ ≤ ≤ Darling New # DN 7285 Mirror ≤ ≤ ≤ Darling New # DN 7535 Mirror Cabinet ≤ ≤ ≤ Darling New # DN 7536 Mirror Cabinet ≤ ≤ ≤ Darling New # DN 7537 Mirror Cabinet ≤ ≤ ≤ Darling New # DN 7538 Mirror Cabinet ≤ ≤ ≤ Delos # DL 7240 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7241 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7242 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7243 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7244 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7247 L/R/O Mirror ≤ ≤ ≤ Delos # DL 7340 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7341 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7342 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7343 L/R/O Mirror ≤ ≤ ≤ ≤ Delos # DL 7344 L/R/O Mirror ≤ ≤ ≤ Delos # DL 7541 Mirror Cabinet ≤ ≤ ≤ ≤ Delos # DL 7542 Mirror Cabinet ≤ ≤ ≤ ≤ Delos # DL 7543 Mirror Cabinet ≤ ≤ ≤ ≤ Delos # DL 7544 Mirror Cabinet ≤ ≤ ≤ ≤ Delos # DL 7641 Mirror Cabinet ≤ ≤ ≤ Delos # DL 7642 Mirror Cabinet ≤ ≤ ≤ Delos # DL 7643 Mirror Cabinet ≤ ≤ ≤ Delos # DL 7644 Mirror Cabinet ≤ ≤ ≤ DuraStyle # DS 7266 Mirror ≤ ≤ ≤ DuraStyle # DS 7267 Mirror ≤ ≤ ≤ DuraStyle # DS 7268 Mirror ≤ ≤ ≤ DuraStyle # DS 7269 Mirror ≤ ≤ ≤ DuraStyle # DS 7270 Mirror ≤ ≤ ≤ DuraStyle # DS 7271 Mirror ≤ ≤ ≤ Fogo # FO 9614 Mirror ≤ ≤* ≤ ≤ Fogo # FO 9615 Mirror ≤ ≤* ≤ ≤ Fogo # FO 9616 Mirror ≤ ≤* ≤ ≤ Fogo # FO 9680 Mirror ≤ ≤ ≤ Fogo # FO 9681 Mirror ≤ ≤ ≤ Fogo # FO 9682 Mirror ≤ ≤ ≤ Fogo # FO 9672 Mirror Cabinet ≤ ≤ ≤ * Color 13, 24, 65 PL 14_News_US 73 Mirrors / Mirror Cabinets Series 74 Furniture Model type PL 14 - June 2015 Stock articles June 2015 New - July 2015 New - July 2015 Junction Box for wall connection Junction Box for wall connection Flat plug for wall connection New sensor switch Fogo # FO 9674 Mirror Cabinet ≤ ≤ ≤ Fogo # FO 9676 Mirror Cabinet ≤ ≤ ≤ Fogo # FO 9678 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7291 Mirror ≤ ≤ ≤ Happy D.2 # H2 7293 Mirror ≤ ≤ ≤ Happy D.2 # H2 7294 Mirror ≤ ≤ ≤ Happy D.2 # H2 7295 Mirror ≤ ≤ ≤ Happy D.2 # H2 7296 Mirror ≤ ≤ ≤ Happy D.2 # H2 7593 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7594 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7595 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7596 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7693 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7694 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7695 Mirror Cabinet ≤ ≤ ≤ Happy D.2 # H2 7696 Mirror Cabinet ≤ ≤ ≤ Ketho # KT 7330 Mirror ≤ ≤ ≤ ≤ Ketho # KT 7331 Mirror ≤ ≤ ≤ ≤ Ketho # KT 7332 Mirror ≤ ≤ ≤ ≤ Ketho # KT 7333 Mirror ≤ ≤ ≤ ≤ Ketho # KT 7530 L/R Mirror Cabinet ≤ ≤ ≤ Ketho # KT 7531 Mirror Cabinet ≤ ≤ ≤ Ketho # KT 7532 Mirror Cabinet ≤ ≤ ≤ Ketho # KT 7533 Mirror Cabinet ≤ ≤ ≤ L-Cube # LC 7380 Mirror ≤ ≤ L-Cube # LC 7381 Mirror ≤ ≤ L-Cube # LC 7382 Mirror ≤ ≤ L-Cube # LC 7383 Mirror ≤ ≤ L-Cube # LC 7384 Mirror ≤ ≤ L-Cube # LC 7385 Mirror ≤ ≤ L-Cube # LC 7386 Mirror ≤ ≤ L-Cube # LC 7387 Mirror ≤ ≤ Starck # S1 9716 Mirror ≤ ≤ ≤ ≤ Starck # S1 9717 Mirror ≤ ≤ ≤ ≤ Starck # S1 9718 Mirror ≤ ≤ ≤ ≤ Starck # S1 9720 L/R Mirror Cabinet ≤ ≤ ≤ ≤ Starck # S1 9721 L/R Mirror Cabinet ≤ ≤ ≤ ≤ Vero # VE 7266 Mirror ≤ ≤ ≤ Vero # VE 7267 Mirror ≤ ≤ ≤ Vero # VE 7268 Mirror ≤ ≤ ≤ Vero # VE 7269 Mirror ≤ ≤ ≤ Vero # VE 7270 Mirror ≤ ≤ ≤ Vero # VE 7271 Mirror ≤ ≤ ≤ Vero # VE 7300 Mirror ≤ ≤ ≤ Vero # VE 7301 Mirror ≤ ≤ ≤ Vero # VE 7302 Mirror ≤ ≤ ≤ Vero # VE 7303 Mirror ≤ ≤ ≤ PL 14_News_US Mirrors / Mirror Cabinets Series Furniture Model type PL 14 - June 2015 Stock articles June 2015 New - July 2015 New - July 2015 Junction Box for wall connection Junction Box for wall connection Flat plug for wall connection New sensor switch Vero # VE 7304 Mirror ≤ ≤ ≤ Vero # VE 7320 Mirror ≤ ≤ ≤ Vero # VE 7321 Mirror ≤ ≤ ≤ Vero # VE 7322 Mirror ≤ ≤ ≤ Vero # VE 7323 Mirror ≤ ≤ ≤ Vero # VE 7324 Mirror ≤ ≤ ≤ Vero # VE 7310 Mirror ≤ ≤ ≤ Vero # VE 7311 Mirror ≤ ≤ ≤ Vero # VE 7312 Mirror ≤ ≤ ≤ Vero # VE 7313 Mirror ≤ ≤ ≤ Vero # VE 7314 Mirror ≤ ≤ ≤ Vero # VE 7350 Mirror ≤ ≤ ≤ Vero # VE 7351 Mirror ≤ ≤ ≤ Vero # VE 7352 Mirror ≤ ≤ ≤ Vero # VE 7353 Mirror ≤ ≤ ≤ Vero # VE 7354 Mirror ≤ ≤ ≤ Vero # VE 7360 Mirror ≤ ≤ ≤ Vero # VE 7361 Mirror ≤ ≤ ≤ Vero # VE 7362 Mirror ≤ ≤ ≤ Vero # VE 7363 Mirror ≤ ≤ ≤ Vero # VE 7500 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7501 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7502 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7503 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7504 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7600 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7602 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7603 Mirror Cabinet ≤ ≤ ≤ Vero # VE 7604 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7290 Mirror ≤ ≤ ≤ X-Large # XL 7292 Mirror ≤ ≤ ≤ X-Large # XL 7294 Mirror ≤ ≤ ≤ X-Large # XL 7295 Mirror ≤ ≤ ≤ X-Large # XL 7296 Mirror ≤ ≤ ≤ X-Large # XL 7592 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7594 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7595 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7596 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7692 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7694 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7695 Mirror Cabinet ≤ ≤ ≤ X-Large # XL 7696 Mirror Cabinet ≤ ≤ ≤ PL 14_News_US 75 Cape Cod Design by Philippe Starck Product Information Metal frame Steel Chrome Basic material: Steel square tube hollow profile with surface in chrome. Console Shelf Real wood massive Pricegroup 1 76 European Oak solid wood 81 White Beech solid wood Basic material: Massive wooden board lacquered transparent. Real wood massive Pricegroup 2 77 American Walnut solid wood Basic material: Massive wooden board lacquered transparent. Lacquer Pricegroup 3 85 White High Gloss Basic material: High-compressed MDF board. Lacquered opaque in several coats. Edge material: ABS-Edge material (lacquered). Massivholz Pricegroup 4 95 Vintage Oak solid wood Basic material: Massive wooden board oiled. Lacquer Pricegroup 3 85 White High Gloss Fronts Body Massive wooden boards are unique with top quality, differences in color and structure may occur. Mirror Edge Mirror ground plate LED light technology, 3500 Kelvin light color. Sensor switch bottom right for on/off function. Neutral All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist 76 PL 14_News_US Basic material: High-compressed MDF board. Lacquered opaque in several coats. Edge material: ABS-Edge material (lacquered). Basic material: High-compressed MDF board directly coated. Edge material: ABS-Edge material (lacquered). Cape Cod Design by Philippe Starck Ordering Sample 2 C 1 Cape Cod Vanity unit floor-standing Mirror with lighting 85 White High Gloss Description Remark Quantity Model-No. 1 Vanity unit floor-standing Width 44 1/8" 1 # CC 9533 0 85 85 2 Mirror with lighting Width 30 1/8" 1 # CC 9641 0 00 00 C Washbowl Cape Cod Width 19 5/8" 1 # 233950 00 001 PL 14_News_US 77 Cape Cod Design by Philippe Starck Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 X 112 0 44 1/8 ” 110 0 43 1/4 ” Vanity unit floor standing 1 console, 1 shelf below 44 1/8“ x 22 1/2“ CC 9532 3,825 4,760 3,825 5,950 Infobox: In combination with ceramic # 233950, the tap hole is positioned on the right side / Required specification for ordering: - Model no. ceramic, please refer to page 107 X 112 0 44 1/8 ” 110 0 43 1/4 ” Vanity unit floor standing 1 console, 1 furniture with doors and shelf elements laterally 44 1/8“ x 22 1/2“ CC 9533 6,545 Infobox: Only available in color 85-White High Gloss / Space saving siphon # 005073 is recommended / In combination with ceramic # 233950, the tap hole is positioned on the right side / Required specification for ordering: - Model no. ceramic, please refer to page 107 1106 43 1/2 766 301/8 Mirror with lighting cIAPMO®ELECTRICAL, 1 sensor switch bottom right, Mirrors require GFCI 110V 60Hz power source. Flat plug will be supplied with mirror. LED module 3500 kelvin light color, 54 W 30 1/8“ x 2 3/8“ 78 PL 14_News_US CC 9641 3,995 DuraStyle Design by Matteo Thun Product Information Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, directly coated with melamine resin decor on both sides. Handle cover integrated, execution corpus color. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, directly coated with melamine resin decor on both sides. Handle cover integrated, execution corpus color. Edge material: ABS-Edge material. Body Bicolor Decor Pricegroup 1 18 White Matt 43 Basalt Matt Basic material: High-compressed three-ply chipboard, directly coated with melamine resin decor on both sides. Handle cover integrated, execution corpus color. Edge material: ABS-Edge material. Console Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: Base: solid wood, multiplex curved pasted plywood, with laminate (HPL) pressed on both sides. Edge material: All edges and cut-outs for towels consists of plywood, waterproofed sealed with oil (color-coordinated to the laminate). Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: Base: solid wood, multiplex curved pasted plywood, with laminate (HPL) pressed on both sides. Edge material: All edges and cut-outs for towels consists of plywood, waterproofed sealed with oil (color-coordinated to the laminate). Fronts Body Fronts Bicolor Mirror with lighting Edges mirror ground plate LED light technology, 3500 Kelvin light color. Sensor switch bottom right for on/off function. Decor Pricegroup 1 37 White Aluminium Basic material: High-compressed MDF board directly coated. Edge material: ABS-Edge material. handleless Protruding front for opening. Real wood massive Pricegroup 1 76 European Oak massive Body frame massive lacquered. Real wood massive Pricegroup 2 77 American Walnut massive Body frame massive lacquered. Decor 14 18 22 43 49 Basic material: Shelves from high-compressed three-ply chipboard with melamine resin decor pressed on both sides. Edge material: ABS-Edge material. Extension mechanism Body furniture accessoires Shelf furniture accessoires Seat Cushion Terra White Matt White High Gloss Basalt Matt Graphite Matt White Synthetic Leather All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist PL 14_News_US 79 DuraStyle Design by Matteo Thun Ordering Sample 3 C 2 1 80 DuraStyle Vanity Unit Tall cabinet Mirror with lighting 53 Chestnut dark 43 Basalt Matt Description Remark Quantity Model-No. 1 Vanity unit wall-mounted Width 28 3/4" 1 # DS 6381 0 53 43 2 Tall cabinet Width 19 5/8" 1 # DS 1249 L 53 43 3 Mirror with lighting Width 31 1/2" 1 # DS 7268 0 00 00 C DuraStyle 31 1/2" 1 # 232080 00 00 PL 14_News_US DuraStyle Design by Matteo Thun Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 398 15 5/8“ 730 28 3/4“ Vanity unit wall-mounted 1 pull-out compartment, pull-out compartment including cut-out for siphon and siphon cover for DuraStyle # 233778 28 3/4“ x 13 3/4“ DS 6399 750 885 Infobox: Required specification for ordering: - Front color - Body color / Additional option bicolor only with Body color: 18 White Matt / 43 Basalt Matt possible. Front bicolor: freely selectable from all front colors. 610 24“ 730 28 3/4“ Vanity unit wall-mounted 2 drawers, upper drawer including cut-out for siphon and siphon cover for DuraStyle # 233778 28 3/4“ x 13 3/4“ DS 6499 970 1,150 Infobox: Additional option bicolor only with Body color: 18 White Matt / 43 Basalt Matt possible. Front bicolor: freely selectable from all front colors. / Required specification for ordering: - Front color - Body color PL 14_News_US 81 L-Cube Design by Christian Werner Product information Fronts Body Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material inner body/-front: High-compressed three-ply chipboard, directly coated with melamine resin decor in (57) Black Diamond on both sides. Basic material outer body/-front: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material inner body/-front: High-compressed three-ply chipboard, directly coated with melamine resin decor in (57) Black Diamond on both sides. Basic material outer body/-front: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 71 69 72 Basic material inner body/-front: High-compressed three-ply chipboard, directly coated with melamine resin decor in (57) Black Diamond on both sides. Basic material outer body/-front: High-compressed three-ply chipboard, with real wood veneer pressed on both sides. Edge material: ABS-Edge material. Brushed Oak American Walnut American Cherry Tree Mediterranean Oak Brushed Walnut Brushed Dark Oak Real wood veneer is a natural material, differences in color and structure may occur. Console Lacquer Pricegroup 4 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material inner body/-front: High-compressed three-ply chipboard, directly coated with melamine resin decor in (57) Black Diamond on both sides. Basic material outer body/-front: High-compressed MDF-board. Lacquered opaque in several coats. Edge material Inner body/- front: ABS-Edge material. Edge material outer body/- front: ABS-Edge material (lacquered). Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Underside console: (57) Black Diamond. Edge material: ABS-Edge material. Dekor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Underside console: (57) Black Diamond. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 71 69 72 Basic material: High-compressed three-ply chipboard, with real wood veneer pressed on one side and laminate (HPL) pressed on the other side. Edge material: ABS-Edge material. Brushed Oak American Walnut American Cherry Tree Mediterranean Oak Brushed Walnut Brushed Dark Oak All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist 82 PL 14_News_US Real wood veneer is a natural material, differences in color and structure may occur. L-Cube Design by Christian Werner Product information Console Lacquer Pricegroup 4 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. Lacquered opaque in several coats. Underside console directly coated with melamine resin decor in (57) Black Diamond. Edge material: ABS-Edge material (lacquered). Shelf element Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Dekor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 71 69 72 Brushed Oak American Walnut American Cherry Tree Mediterranean Oak Brushed Walnut Brushed Dark Oak Basic material: High-compressed three-ply chipboard, with real wood veneer pressed on both sides. Edge material: ABS-Edge material. 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. Lacquered opaque in several coats. Edge material: ABS-Edge material (lacquered). Lacquer Pricegroup 4 Mirror with lighting Real wood veneer is a natural material, differences in color and structure may occur. LED light technology, 3500 Kelvin light color. Sensor switch bottom right for on/off function. Including LED-dimming function. Edge mirror ground plate Decor Pricegroup 1 White Matt Powdered Basic material: High-compressed three-ply chipboard directly coated. Edge material: Backpanel with ABS-Edge material surrounded by an aluminum profile. Interior System Real Wood massive Pricegroup 1 77 Am. Walnut massive 78 Maple massive The interior system with a material mix of acrylic glass and solid wood is available in maple or walnut. There is an individually designed interior system for each cabinet width between 21 5/8" - 47 1/4". Each size of the cabinet has an individual layout of the interior systems to use the optimum storage space. The box cover plus the small and large wave have a special anti-slip lacquer. All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist PL 14_News_US 83 L-Cube Design by Christian Werner Ordering Sample 1 3 4 C 2 84 L-Cube Body, Fronts Vanity unit wall-mounted Semi-tall cabinet Shelf element Mirror with lighting 71 71 71 85 Description Remark Quantity Model-No. 1 Mirror with lighting Width 31 1/2" 1 # LC 7381 0 00 00 2 Vanity unit wall-mounted Width 32 1/4" 1 # LC 6147 0 71 71 3 Semi-tall cabinet Width 27 1/2" 1 # LC 1177 0 71 71 4 Shelf element (horizontal) Width 31 1/2" 1 # LC 1200 0 85 85 C Furniture washbasin P3 Comforts Width 33 1/2" 1 # 233285 00 00 PL 14_News_US Mediterranean Oak Mediterranean Oak Mediterranean Oak White High Gloss L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 400 15 3/4 “ X Vanity unit wall-mounted 1 pull-out compartment for Me by Starck # 233683 for Me by Starck # 233610 32 1/4“ x 19“ 40 1/8“ x 19“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6141 LC 6142 1,035 1,070 1,120 1,170 1,285 1,345 1,695 1,775 UV 9836 455 UV 9837 565 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 550 21 5/8 “ X Vanity unit wall-mounted 2 drawers, upper drawer including cut-out for siphon and siphon cover for Me by Starck # 233683 32 1/4“ x 19“ for Me by Starck # 233610 40 1/8“ x 19“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 32 1/4“ including siphon cut-out for cabinet widths 40 1/8“ including siphon cut-out LC 6241 LC 6242 1,290 1,325 1,410 1,450 1,610 1,665 2,265 2,330 32 1/4“ UV 9821 395 40 1/8“ UV 9822 470 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut PL 14_News_US 85 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 405 16“ X Vanity unit wall-mounted 1 pull-out compartment for P3 Comforts # 233265 for P3 Comforts # 233285, 233385 for P3 Comforts # 233210, 233310, 233410 Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out for cabinet widths 32 1/4“ without siphon cut-out for cabinet widths 40 1/8“ without siphon cut-out for cabinet widths 48“ without siphon cut-out 24 3/8“ x 19“ 32 1/4“ x 19“ LC 6144 LC 6147 1,005 1,035 1,085 1,120 1,235 1,285 1,670 1,695 40 1/8“ x 19“ LC 6150 1,070 1,170 1,345 1,775 24 3/8“ UV 9835 400 32 1/4“ UV 9836 455 40 1/8“ UV 9837 565 48“ UV 9834 565 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 555 21 7/8 “ X Vanity unit wall-mounted 2 drawers, upper drawer including cut-out for siphon and siphon cover for P3 Comforts # 233265 24 3/8“ x 19“ for P3 Comforts # 233285 32 1/4“ x 19“ for P3 Comforts # 233210 40 1/8“ x 19“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 24 3/8“ including siphon cut-out for cabinet widths 32 1/4“ including siphon cut-out for cabinet widths 40 1/8“ including siphon cut-out LC 6244 LC 6247 LC 6250 1,260 1,290 1,325 1,370 1,410 1,450 1,550 1,610 1,665 2,205 2,265 2,330 24 3/8“ UV 9820 285 32 1/4“ UV 9821 395 40 1/8“ UV 9822 470 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 86 PL 14_News_US L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 555 21 7/8 “ X Vanity unit wall-mounted 2 drawers, upper drawer including cut-out for siphon and siphon cover for P3 Comforts # 233385 basin left 32 1/4“ x 19“ for P3 Comforts # 233310 basin left 40 1/8“ x 19“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 32 1/4“ including siphon cut-out for cabinet widths 40 1/8“ including siphon cut-out LC 6248 LC 6251 1,290 1,325 1,410 1,450 1,610 1,665 2,265 2,330 32 1/4“ UV 9995 395 40 1/8“ UV 9996 470 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 555 21 7/8 “ 102 0 40 1/8 ” Vanity unit wall-mounted 2 drawers, upper drawer including cut-out for siphon and siphon cover for P3 Comforts # 233410 basin right 40 1/8“ x 19“ LC 6252 1,325 1,450 1,665 2,330 Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 40 1/8“ including siphon cut-out UV 9996 470 40 1/8“ Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut PL 14_News_US 87 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 5 152 7/8 “ 704 27 3/4 ” X Vanity unit floor standing 2 pull-out compartments, upper drawer including cut-out for siphon and siphon cover for Me by Starck # 233683 32 1/4“ x 19“ for Me by Starck # 233610 40 1/8“ x 19“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 32 1/4“ including siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ including siphon cut-out 40 1/8“ LC 6626 LC 6627 1,325 1,360 1,470 1,515 1,670 1,730 2,365 2,435 UV 9839 395 UV 9840 470 Infobox: Plinth leg # UV 9991, UV 9992 or # UV 9993, UV 9994 are mandatory for installation and are required to be ordered as a separate line item / Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 5 152 7/8 “ 709 28” X Vanity unit floor standing 2 pull-out compartments for P3 Comforts # 233265 for P3 Comforts # 233285, 233385 for P3 Comforts # 233210, 233310, 233410 24 3/8“ x 19“ 32 1/4“ x 19“ LC 6600 LC 6601 1,290 1,325 1,430 1,470 1,610 1,670 2,305 2,365 40 1//8“ x 19“ LC 6602 1,360 1,515 1,730 2,435 UV 9835 400 UV 9836 455 UV 9837 565 Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ Infobox: Plinth leg # UV 9991, UV 9992 or # UV 9993, UV 9994 are mandatory for installation and are required to be ordered as a separate line item / Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 88 PL 14_News_US L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 856 33 5/8 ” X Vanity unit floor standing 2 pull-out compartments, upper drawer including cut-out for siphon and siphon cover, plinth panel for Me by Starck # 233683 32 1/4“ x 19“ for Me by Starck # 233610 40 1/8“ x 19“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 32 1/4“ including siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ including siphon cut-out 40 1/8“ LC 6681 LC 6682 1,390 1,425 1,545 1,585 1,765 1,820 2,530 2,600 UV 9839 395 UV 9840 470 Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut 861 33 7/8 ” X Vanity unit floor standing 2 pull-out compartments, plinth panel for P3 Comforts # 233265 for P3 Comforts # 233285, 233385 for P3 Comforts # 233210, 233310, 233410 24 3/8“ x 19“ 32 1/4“ x 19“ LC 6612 LC 6613 1,355 1,390 1,510 1,545 1,720 1,765 2,505 2,530 40 1/8“ x 19“ LC 6614 1,425 1,585 1,820 2,600 UV 9835 400 UV 9836 455 UV 9837 565 Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ Infobox: Space saving siphon # 005073 is recommended / Required specification for ordering: - interior system yes / no - maple or walnut PL 14_News_US 89 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 130 5 1/8“ 70 2 3/4“ Plinth leg Aluminum matt, 2 pieces Aluminum matt, 4 pieces Chrome, 2 pieces Chrome, 4 pieces 2 3/4“ x 2 1/2“ 2 3/4“ x 2 1/2“ 2 3/4“ x 2 1/2“ 2 3/4“ x 2 1/2“ UV 9991 UV 9992 UV 9993 UV 9994 105 175 135 235 LC 094C 430 20 450 25 510 40 630 55 1 30 1/8 ” ma x. 200 0 ma x. 78 3/4 ” Console for above-counter basin and countertop basin 1 console with one cut-out, Width min. see ordering information, Width max. 78 3/4“ basic price until 31 1/2“ 18 7/8“ price per section of 3 7/8“ Infobox: Required specification for the order: - overall width - dimensions from console edge to middle of basin(s) - color - ceramic model and min. width, please see page 116 - 117 - exact position of floor cabinets / console supports Please indicate exact measurements and drawings; refer to order sheet page 118 / Console may be ordered without cut-out, must specify when ordering / Console less than 31 1/2“, may be possible on request 1 30 1/8 ” ma x. 200 0 ma x. 78 3/4 ” Console for above-counter basin and countertop basin 1 console with two cut-outs, Width min. see ordering information, Width max. 78 3/4“ basic price until 31 1/2“ 18 7/8“ price per section of 3 7/8“ LC 095C 465 20 490 25 555 40 Infobox: Required specification for the order: - overall width - dimensions from console edge to middle of basin(s) - color - ceramic model and min. width, please see page 116 - 117 - exact position of floor cabinets / console supports Please indicate exact measurements and drawings; refer to order sheet page 118 / Console may be ordered without cut-out, must specify when ordering / Console less than 31 1/2“, may be possible on request 90 PL 14_News_US 685 55 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 400 15 3/4 “ X Vanity unit for console 1 pull-out compartment 12 5/8“ x 18 3/4“ 16 1/2“ x 18 3/4“ 20 1/2“ x 18 3/4“ 24 3/8“ x 18 3/4“ 32 1/4“ x 18 3/4“ 40 1/8“ x 18 3/4“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6808 LC 6809 LC 6810 LC 6811 LC 6812 LC 6813 815 835 860 880 905 935 865 890 920 950 980 1,020 970 1,005 1,040 1,080 1,125 1,175 1,170 1,260 1,355 1,460 1,485 1,550 UV 9835 400 UV 9836 455 UV 9837 565 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 400 15 3/4 “ X Vanity unit for console with 2 drawers, upper drawer including cut-out for siphon and siphon cover 12 5/8“ x 18 3/4“ 16 1/2“ x 18 3/4“ 16 1/2“ x 18 3/4“ 24 3/8“ x 18 3/4“ 32 1/4“ x 18 3/4“ 40 1/8“ x 18 3/4“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 24 3/8“ including siphon cut-out for cabinet widths 32 1/4“ including siphon cut-out for cabinet widths 40 1/8“ including siphon cut-out LC 6818 LC 6819 LC 6820 LC 6821 LC 6822 LC 6823 1,080 1,105 1,130 1,155 1,185 1,210 1,130 1,165 1,200 1,230 1,270 1,305 1,210 1,250 1,295 1,345 1,395 1,440 1,360 1,455 1,560 1,670 1,770 1,900 24 3/8“ UV 9820 285 32 1/4“ UV 9821 395 40 1/8“ UV 9822 470 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut PL 14_News_US 91 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 400 15 3/4 “ X Low cabinet for console 1 pull-out compartment 12 5/8“ x 18 3/4“ 16 1/2“ x 18 3/4“ 20 1/2“ x 18 3/4“ 24 3/8“ x 18 3/4“ 32 1/4“ x 18 3/4“ 40 1/8“ x 18 3/4“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6848 LC 6849 LC 6850 LC 6851 LC 6852 LC 6853 780 800 820 845 870 890 830 860 895 925 960 990 930 965 1,010 1,050 1,095 1,135 1,100 1,185 1,275 1,370 1,480 1,585 UV 9828 225 UV 9829 375 UV 9830 535 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 400 15 3/4 “ X Low cabinet for console with 2 drawers 12 5/8“ x 18 3/4“ 16 1/2“ x 18 3/4“ 20 1/2“ x 18 3/4“ 24 3/8“ x 18 3/4“ 32 1/4“ x 18 3/4“ 40 1/8“ x 18 3/4“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6858 LC 6859 LC 6860 LC 6861 LC 6862 LC 6863 980 1,005 1,030 1,060 1,085 1,110 1,035 1,070 1,105 1,140 1,175 1,210 1,170 1,210 1,245 1,285 1,315 1,365 1,265 1,360 1,465 1,575 1,695 1,805 UV 9831 400 UV 9832 455 UV 9833 565 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 92 PL 14_News_US L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 1 30 1/8 ” ma x. 200 0 ma x 78 3/4 ” Console for above-counter basin and countertop basin 1 console with one cut-out, Width min. see ordering information, Width max. 78 3/4“ basic price until 31 1/2“ 21 5/8“ price per section of 3 7/8“ LC 096C 440 35 460 45 525 60 655 80 Infobox: Required specification for the order: - overall width - dimensions from console edge to middle of basin(s) - color - ceramic model and min. width, please see page 116 - 117 - exact position of floor cabinets / console supports Please indicate exact measurements and drawings; refer to order sheet page 118 / Console may be ordered without cut-out, must specify when ordering / Console less than 31 1/2“, may be possible on request 1 30 1/8 ” ma x. 200 0 ma x. 78 3/4 ” Console for above-counter basin and countertop basin 1 console with two cut-outs, Width min. see ordering information, Width max. 78 3/4“ basic price until 31 1/2“ 21 5/8“ price per section of 3 7/8“ LC 097C 475 35 500 45 570 60 710 80 Infobox: Required specification for the order: - overall width - dimensions from console edge to middle of basin(s) - color - ceramic model and min. width, please see page 116 - 117 - exact position of floor cabinets / console supports Please indicate exact measurements and drawings; refer to order sheet page 118 / Console may be ordered without cut-out, must specify when ordering / Console less than 31 1/2“, may be possible on request PL 14_News_US 93 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 400 15 3/4 “ X Vanity unit for console 1 pull-out compartment 12 5/8“ x 21 1/2“ 16 1/2“ x 21 1/2“ 20 1/2“ x 21 1/2“ 24 3/8“ x 21 1/2“ 32 1/4“ x 21 1/2“ 40 1/8“ x 21 1/2“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6824 LC 6825 LC 6826 LC 6827 LC 6828 LC 6829 860 885 905 930 955 980 930 955 985 1,015 1,050 1,080 1,025 1,060 1,100 1,140 1,185 1,230 1,175 1,265 1,360 1,460 1,570 1,680 UV 9835 400 UV 9836 455 UV 9837 565 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 400 15 3/4 “ X Vanity unit for console with 2 drawers, upper drawer including cut-out for siphon and siphon cover 12 5/8“ x 21 1/2“ 16 1/2“ x 21 1/2“ 20 1/2“ x 21 1/2“ 24 3/8“ x 21 1/2“ 32 1/4“ x 21 1/2“ 40 1/8“ x 21 1/2“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 24 3/8“ including siphon cut-out for cabinet widths 32 1/4“ including siphon cut-out for cabinet widths 40 1/8“ including siphon cut-out LC 6834 LC 6835 LC 6836 LC 6837 LC 6838 LC 6839 1,135 1,165 1,190 1,220 1,250 1,275 1,190 1,225 1,260 1,295 1,335 1,370 1,270 1,315 1,365 1,415 1,465 1,515 1,430 1,535 1,645 1,760 1,865 2,000 24 3/8“ UV 9820 285 32 1/4“ UV 9821 395 40 1/8“ UV 9822 470 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 94 PL 14_News_US L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 400 15 3/4 “ X Low cabinet for console 1 pull-out compartment 12 5/8“ x 21 1/2“ 16 1/2“ x 21 1/2“ 20 1/2“ x 21 1/2“ 24 3/8“ x 21 1/2“ 32 1/4“ x 21 1/2“ 40 1/8“ x 21 1/2“ Additional modules Interior system for pull-out compartment in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6864 LC 6865 LC 6866 LC 6867 LC 6868 LC 6869 825 845 865 890 915 940 875 905 940 975 1,010 1,040 975 1,015 1,060 1,100 1,150 1,195 1,160 1,245 1,340 1,440 1,555 1,670 UV 9828 225 UV 9829 375 UV 9830 535 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut 400 15 3/4 “ X Low cabinet for console with 2 drawers 12 5/8“ x 21 1/2“ 16 1/2“ x 21 1/2“ 20 1/2“ x 21 1/2“ 24 3/8“ x 21 1/2“ 32 1/4“ x 21 1/2“ 40 1/8“ x 21 1/2“ Additional modules Interior system for drawer in maple or walnut solid wood for cabinet widths 24 3/8“ without siphon cut-out 24 3/8“ for cabinet widths 32 1/4“ without siphon cut-out 32 1/4“ for cabinet widths 40 1/8“ without siphon cut-out 40 1/8“ LC 6874 LC 6875 LC 6876 LC 6877 LC 6878 LC 6879 1,030 1,060 1,085 1,115 1,145 1,170 1,090 1,125 1,160 1,200 1,240 1,275 1,235 1,275 1,310 1,350 1,385 1,435 1,335 1,430 1,540 1,655 1,785 1,900 UV 9831 400 UV 9832 455 UV 9833 565 Infobox: Please keep 1/8“ space to the wall / Console not included in delivery, please order separately / Required specification for ordering: - interior system yes / no - maple or walnut PL 14_News_US 95 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 700 21 1/2 ” X Mirror with lighting cIAPMO®ELECTRICAL, LED lighting (4-sided) 3300K, 1 sensor switch bottom right, Mirrors require GFCI 110V 60Hz power source. Flat plug will be supplied with mirror. LED module 3500 Kelvin light color, 38 W LED module 3500 Kelvin light color, 43 W LED module 3500 Kelvin light color, 48 W LED module 3500 Kelvin light color, 57 W LED module 3500 Kelvin light color, 62 W LED module 3500 Kelvin light color, 67 W LED module 3500 Kelvin light color, 76 W LED module 3500 Kelvin light color, 81 W 25 5/8“ x 2 5/8“ 31 1/2“ x 2 5/8“ 39 3/8“ x 2 5/8“ 47 1/4“ x 2 5/8“ 55 1/8“ x 2 5/8“ 63“ x 2 5/8“ 70 7/8“ x 2 5/8“ 78 3/4“ x 2 5/8“ LC 7380 LC 7381 LC 7382 LC 7383 LC 7384 LC 7385 LC 7386 LC 7387 1,265 1,355 1,515 1,715 2,270 2,620 3,010 3,370 27 1/2“ x 9 1/2“ LC 1167 1,080 1,190 1,380 1,875 27 1/2“ x 14 1/3“ LC 1177 1,120 1,270 1,515 2,005 800 31 1/2 “ 700 27 1/2 “ Semi-tall cabinet 2 doors, 1 glass shelf with aluminum brackets Infobox: Please keep 2“ space to the wall 800 31 1/2 “ 700 27 1/2 “ Semi-tall cabinet 2 doors, 1 glass shelf with aluminum brackets Infobox: Please keep 2“ space to the wall 96 PL 14_News_US L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 1320 52” X Semi-tall cabinet 1 door, 3 glass shelves with aluminum brackets 15 3/4“ x 9 1/2“ 19 5/8“ x 9 1/2“ LC 1168 L/R LC 1169 L/R 960 990 1,060 1,105 1,230 1,295 1,650 1,755 Infobox: Please keep 2“ space to the wall / Required specification for ordering: - hinges left (L) / right (R) / Plinth leg is recommended / # UV 9991 aluminum matt 2 pieces, if 4 pieces necessary please order 2 x # UV 9991 / #UV 9993 chrome 2 pieces, if 4 pieces necessary please order 2 x #UV 9993 / Plinth legs # UV 9992 and UV 9994 are not suitable 1320 52” X Semi-tall cabinet 1 door, 3 glass shelves with aluminum brackets 15 3/4“ x 14 1/3“ 19 5/8“ x 14 1/3“ LC 1178 L/R LC 1179 L/R 1,055 1,085 1,165 1,215 1,370 1,440 1,955 2,185 Infobox: Please keep 2“ space to the wall / Required specification for ordering: - hinges left (L) / right (R) / Plinth leg is recommended / # UV 9991 aluminum matt 2 pieces, if 4 pieces necessary please order 2 x # UV 9991 / #UV 9993 chrome 2 pieces, if 4 pieces necessary please order 2 x #UV 9993 / Plinth legs # UV 9992 and UV 9994 are not suitable PL 14_News_US 97 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 1760 69 1/4 ” X Tall cabinet 1 door, 4 glass shelves with aluminum brackets 15 3/4“ x 9 1/2“ 19 5/8“ x 9 1/2“ LC 1170 L/R LC 1171 L/R 1,135 1,170 1,265 1,320 1,500 1,585 2,020 2,250 Infobox: Please keep 2“ space to the wall / Required specification for ordering: - hinges left (L) / right (R) / Plinth leg is recommended / # UV 9991 aluminum matt 2 pieces, if 4 pieces necessary please order 2 x # UV 9991 / #UV 9993 chrome 2 pieces, if 4 pieces necessary please order 2 x #UV 9993 / Plinth legs # UV 9992 and UV 9994 are not suitable 1760 69 1/4 ” X Tall cabinet 1 door, 4 glass shelves with aluminum brackets 15 3/4“ x 14 1/3“ 19 5/8“ x 14 1/3“ LC 1180 L/R LC 1181 L/R 1,245 1,285 1,395 1,460 1,675 1,770 2,275 2,500 Infobox: Please keep 2“ space to the wall / Required specification for ordering: - hinges left (L) / right (R) / Plinth leg is recommended / # UV 9991 aluminum matt 2 pieces, if 4 pieces necessary please order 2 x # UV 9991 / #UV 9993 chrome 2 pieces, if 4 pieces necessary please order 2 x #UV 9993 / Plinth legs # UV 9992 and UV 9994 are not suitable 120 4 3/4 “ X Shelf element (horizontal) 3 compartments 3 compartments 98 PL 14_News_US 31 1/2“ x 5 1/2“ 39 3/8“ x 5 1/2 LC 1200 LC 1201 455 460 505 520 650 685 740 815 L-Cube Design by Christian Werner Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 1000 39 3/8 ” 180 7 1/8 ” Shelf element (vertical) 4 compartments 7 1/8“ x 7 1/8“ LC 1205 570 660 870 1,105 7 1/8“ x 7 1/8“ LC 1206 580 700 970 1,280 1400 55 1/8 ” 180 7 1/8 ” Shelf element (vertical) 5 compartments PL 14_News_US 99 X-Large Design by sieger design Product Information Fronts Body 14 18 31 43 49 51 52 53 79 Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 69 71 72 Brushed Oak American Walnut American Cherry Tree Brushed Walnut Mediterranean Oak Brushed Dark Oak Basic material: High-compressed three-ply chipboard, with real wood veneer pressed on one side and laminate (HPL) in (57) Black Diamond pressed on the other side. Edge material: ABS-Edge material. 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. Lacquered opaque in several coats. Inside directly coated with melamine resin decor in (57) Black Diamond. Edge material: ABS-Edge material (lacquered). Lacquer Pricegroup 4 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Mirror/ Mirror cabinet with lighting All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist 100 PL 14_News_US Basic material: High-compressend three-ply chipboard, directly coated with melamine resin decor on both sides. Edge material: ABS-Edge material. Decor Pricegroup 1 Real wood veneer is a natural material, differences in color and structure may occur. LED light technology, 3500 Kelvin light Color. Sensor switch bottom right for on/off function. X-Large Design by sieger design Product Information Mirror Mirror cabinet Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed MDF board, directly coated. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed MDF board, directly coated. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 69 71 72 Brushed Oak American Walnut American Cherry Tree Brushed Walnut Mediterranean Oak Brushed Dark Oak Basic material: High-compressed MDF board, directly coated. Edge material: ABS-Edge material. Lacquer Pricegroup 4 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board, directly coated. Edge material: ABS-Edge material. Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Outside: surface finish / Inside: laminate (HPL) in (57) Black Diamond. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Outside: surface finish / Inside: laminate (HPL) in (57) Black Diamond. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 69 71 72 Brushed Oak American Walnut American Cherry Tree Brushed Walnut Mediterranean Oak Brushed Dark Oak Basic material: High-compressed three-ply chipboad, with real wood veneer pressed on one side and laminate (HPL) in (57) Black Diamond on the other side. Outside: surface finish / Inside: laminate (HPL) in (57) Black Diamond. Edge material: ABS-Edge material. 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. Outside one-sided laquered opaque in several coats and highly polished. Inside directly coated with melamin resin decor in (57) Black Diamond. Edge material: ABS-Edge material. Lacquer Pricegroup 4 Real wood veneer is a natural material, differences in color and structure may occur. Real wood veneer is a natural material, differences in color and structure may occur. All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist PL 14_News_US 101 X-Large Design by sieger design Product Information Console Wall board Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 69 71 72 Brushed Oak American Walnut American Cherry Tree Brushed Walnut Mediterranean Oak Brushed Dark Oak Basic material: High-compressed three-ply chipboad, with real wood veneer pressed on one side and laminate (HPL) in (57) Black Diamond on the other side. Edge material: ABS-Edge material. Lacquer Pricegroup 4 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. One-sided lacquered opaque in several coats including shadow gab. Console underside: directly coated with melamine resin decor in (57) Black Diamond. Edge material: ABS-Edge material (lacquered). Decor Pricegroup 1 14 18 31 43 49 51 52 53 79 Terra White Matt Pine Silver Basalt Matt Graphite Matt Pine Terra European Oak Chestnut Dark Natural Walnut Basic material: High-compressed three-ply chipboard, directly coated with melamine resin decor on both sides. Edge material: ABS-Edge material. Decor Pricegroup 2 22 White High Gloss 73 Ticino Cherry Tree Basic material: High-compressed three-ply chipboard, with laminate (HPL) pressed on both sides. Edge material: ABS-Edge material. Real wood veneer Pricegroup 3 12 13 26 69 71 72 Brushed Oak American Walnut American Cherry Tree Brushed Walnut Mediterranean Oak Brushed Dark Oak Basic material: High-compressed three-ply chipboard, with real wood veneer pressed on both sides. Edge material: ABS-Edge material. 03 10 20 27 38 40 47 61 85 86 87 89 90 Jade High Gloss Apricot Pearl High Gloss Apricot Pearl Satin Matt White Lilac High Gloss Dolomiti Grey High Gloss Black High Gloss Stone Blue High Gloss Olive Brown High Gloss White High Gloss Cappuccino High Gloss White Lilac Satin Matt Flannel Grey High Gloss Flannel Grey Satin Matt Basic material: High-compressed MDF board. Lacquered opaque in several coats. Edge material: ABS-Edge material (lacquered). Lacquer Pricegroup 4 All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist 102 PL 14_News_US Real wood veneer is a natural material, differences in color and structure may occur. Real wood veneer is a natural material, differences in color and structure may occur. X-Large Design by sieger design Product Information Handles Furniture Silver anodized Soundsystem Interior System Aluminum The 2.1 system with 2 flat drive speakers, 1 active bass and 1 passive bass create a high-quality listening experience, especially matched to the bathroom environment. Output power: 2x5 Watt (tweeter/midrange), 1x25 Watt (active bass with one passive radiator-principle). The technical components of the soundsystem are invisibly integrated into the LED Mirror cabinet, with a loss of the useable volume of 2 1/8" in height. The control of the soundsystem is independent of the illumination. Music streaming and control is compatible with all Bluetooth enabled devices, that support the A2DP profile (stereo audio profiles). The standby power consumption is less than 0.5 Watt. 74 Ash massive Box in ash solid wood / bottom ash veneered All Duravit surfaces are resistant to moisture / Furniture Surfaces see end of pricelist PL 14_News_US 103 X-Large Design by sieger design Ordering Sample 4 1 6 C 5 2 X-Large Console, Vanity Unit, Low Cabinet, Tall Cabinet, Wall board, Mirror 104 3 22 White High Gloss Description Remark Quantity Model-No. 1 Tall cabinet Width 19 5/8" 1 # XL 1154 L 22 22 2 Low cabinet for console Width 23 5/8" 1 # XL 6724 0 22 22 3 Vanity unit for console Width 31 1/2" 1 # XL 6714 0 22 22 4 Wall board Width 23 5/8" 2 # XL 7912 0 22 22 5 Console for above counter basin Width 55 1/8" 1 # XL 025C 0 22 22 6 Mirror with lighting Width 23 5/8" 1 # XL 7292 0 22 22 C Vero washbowl 1 # 045460 00 271 PL 14_News_US X-Large Design by sieger design Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 5 152 7/8 “ 668 26 3/8 ” X Vanity unit wall-mounted 2 pull-out compartments, upper drawer including cut-out for siphon and siphon cover for D-Code # 034285 31 1/2“ x 18 1/2“ for D-Code # 034210 39 3/8“ x 18 1/2“ for D-Code # 034812 45 1/4“ x 18 1/2“ XL 6516 XL 6517 XL 6518 1,105 1,395 1,590 1,275 1,605 1,830 1,440 1,815 2,070 1,605 2,020 2,305 Infobox: # XL 6516, # XL 6517 are available from stock in colors 22-White High Gloss, 53-Chestnut Dark and 72-Dark Brushed Oak / Please check your distributor for availability. / Plinth legs not included in delivery, please order separately. 5 152 7/8 “ 668 26 3/8 “ X Vanity unit wall-mounted 2 pull-out compartments, upper drawer including cut-out for siphon and siphon cover for Starck 3 # 030470 25 5/8“ x 18 1/2“ for Starck 3 # 030480 31 1/2“ x 18 1/2“ for Starck 3 # 030410 39 3/8“ x 18 1/2“ for Starck 3 # 033213 47 1/4“ x 18 1/2“ XL 6535 XL 6536 XL 6537 XL 6538 1,185 1,220 1,365 1,550 1,360 1,400 1,570 1,785 1,540 1,585 1,775 2,015 1,720 1,770 1,975 2,250 Infobox: # XL 6535, # XL 6536, # XL 6537 are available from stock in colors 22-White High Gloss, 53-Chestnut Dark and 72-Dark Brushed Oak / Please check your distributor for availability. / Plinth legs not included in delivery, please order separately. 152 5 7/8 “ 588 23 1/4 ” X Vanity unit wall-mounted 2 pull-out compartments, upper drawer including cut-out for siphon and siphon cover for Vero # 032985 (not ground) 31 1/2“ x 18 1/2“ for Vero # 032910 (not ground) 39 3/8“ x 18 1/2“ for Vero # 032912 (not ground) 47 1/4“ x 18 1/2“ XL 6543 XL 6544 XL 6545 1,335 1,490 1,600 1,535 1,715 1,840 1,735 1,940 2,080 1,935 2,160 2,320 Infobox: # XL 6543, # XL 6544, # XL 6545 are available from stock in colors 22-White High Gloss, 53-Chestnut Dark and 72-Dark Brushed Oak / Please check your distributor for availability. / Plinth legs not included in delivery, please order separately. PL 14_News_US 105 X-Large Design by sieger design Description inch Model-No. USD USD USD USD Pricegroup 1 Pricegroup 2 Pricegroup 3 Pricegroup 4 5 152 7/8 “ 588 23 1/4 “ X Vanity unit wall-mounted 3 drawers, upper drawer including cut-out for siphon and siphon cover for Vero # 032985 (not ground) 31 1/2“ x 18 1/2“ for Vero # 032910 (not ground) 39 3/8“ x 18 1/2“ for Vero # 032912 (not ground) 47 1/4“ x 18 1/2“ XL 6553 XL 6554 XL 6555 1,460 1,540 1,605 1,680 1,770 1,845 1,900 2,005 2,090 2,120 2,235 2,325 UV 9991 UV 9992 105 175 Infobox: Plinth legs not included in delivery, please order separately. 130 5 1/8“ 70 2 3/4“ Plinth leg Aluminum matt, 2 pieces Aluminum matt, 4 pieces 106 PL 14_News_US 2 3/4“ x 2 1/2“ 2 3/4“ x 2 1/2“ Cape Cod Recommendation for ceramics + furniture for defined console applications Vanity unit (Console already included) 2) 2 doors 44 1/8" 44 1/8" Series Ceramic Ceramic type # CC 9533 1 shelf # CC 9532 1) 22 1/2" depth Cape Cod # 232848 Countertop ≤ ≤ Cape Cod # 234046 Countertop ≤ ≤ Cape Cod # 233950 Countertop ≤ ≤ 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 107 DuraStyle Recommendation for ceramics + furniture for defined console applications Vanity unit incl. console (Console already included) 2) 21 5/8" depth 1 compartment 2 compartments # DS 6885 # DS 6886 55 1/8" # DS 6785 39 3/8" # DS 6884 # DS 6883 31 1/2" # DS 6784 1) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Series Ceramic Ceramic type 2nd floor # 031758 Countertop Architec # 046840 Bonded Bacino # 032542 Bacino # 033342 Bacino # 033452 Countertop Bagnella # 045140 Countertop ≤ ≤ Bagnella ≤ ≤ ≤ ≤ Countertop ≤ ≤ Countertop ≤ ≤ ≤ # 045148 Countertop ≤ ≤ Darling New # 049747 Countertop ≤ ≤ DuraStyle # 034943 Countertop ≤ ≤ DuraStyle # 034960 Countertop ≤ ≤ DuraStyle # 037337 Bonded Foster # 033550 Countertop PuraVida # 037070 Countertop Santosa # 046651 Bonded Starck 1 # 040853 Countertop ≤ ≤ Starck 1 # 044753 Countertop ≤ ≤ Starck 1 # 044648 Countertop ≤ ≤ Starck 1 # 044546 Countertop ≤ ≤ Starck 1 # 040833 Countertop ≤ ≤ Starck 1 # 038647 Countertop ≤ ≤ Starck 1 # 038747 Countertop ≤ Starck 1 # 232144 Countertop ≤ Starck 1 # 232246 Countertop ≤ Starck 3 # 030549 Bonded Vero # 070445 Countertop Vero # 033048 Bonded ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series 108 PL 14_News_US L-Cube Recommendation for ceramics + furniture for vanity unit for console Vanity unit for console (Please order console separately) 2) 18 7/8" depth 1 compartment 2 drawers 1) # LC 6822 # LC 6823 # LC 6821 # LC 6820 ≤ # LC 6819 # LC 6813 ≤ # LC 6818 # LC 6812 # LC 6811 # LC 6810 # LC 6809 # LC 6808 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" ≤ ≤ Series Ceramic Ceramic type 2nd floor # 031758 Drop-in 2nd floor # 034760 Drop-in 2nd floor # 031758 Countertop Architec # 032042 Countertop Architec # 032040 Countertop Bacino # 032542 Countertop ≤ ≤ Bacino # 033342 Countertop ≤ Bacino # 033452 Countertop ≤ Bagnella # 045140 Countertop ≤ DuraStyle # 034943 Countertop DuraStyle # 034960 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ DuraStyle # 037243 Drop-in ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* Durastyle # 037456 Drop-in ≤* ≤* ≤* ≤* ≤* ≤* Durastyle # 037260 Drop-in ≤* ≤* ≤* ≤* DuraStyle # 262943 Drop-in Foster # 033550 Countertop Happy D.2 # 231440 Countertop Happy D.2 # 231460 Happy D.2 # 231765 Happy D.2 # 231560 Countertop Starck 1 # 040833 Countertop Starck 1 # 232144 Countertop Starck 3 # 030348 Drop-in Vero # 045460 Countertop Vero # 045360 Countertop Vero # 045450 Countertop Vero # 045480 Countertop Vero # 045410 Countertop Vero # 045560 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045550 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 070445 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045250 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045260 Countertop ≤ ≤ ≤ Vero # 045470 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤* ≤* ≤* ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤* ≤* ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ * only possible with space saving siphon / 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 109 L-Cube Recommendation for ceramics + furniture for vanity unit for console Vanity unit for console (Please order console separately) 2) 21 5/8" depth 1 compartment 2 drawers 1) # LC 6838 # LC 6839 # LC 6837 # LC 6836 ≤ # LC 6835 # LC 6829 ≤ # LC 6834 # LC 6828 # LC 6827 # LC 6826 # LC 6825 # LC 6824 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" ≤ ≤ Series Ceramic Ceramic type 2nd floor # 049160 Drop-in 2nd floor # 049170 Drop-in ≤ ≤ 2nd floor # 049180 Drop-in ≤ ≤ 2nd floor # 031758 Drop-in 2nd floor # 031758 Countertop 2nd floor # 034760 Drop-in Architec # 032050 Countertop ≤ Architec # 032045 Countertop ≤ Architec # 032042 Countertop Architec # 032040 Countertop Bacino # 032542 Countertop ≤ Bacino # 033342 Countertop ≤ Bacino # 033452 Countertop Bagnella # 045140 Bagnella ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ # 045148 Countertop ≤ ≤ ≤ D-Code # 033754 Drop-in Darling new # 049747 Countertop DuraStyle # 034943 Countertop DuraStyle # 034960 Countertop ≤* DuraStyle # 037243 Drop-in Durastyle # 037456 Drop-in Durastyle # 037260 Durastyle # 037462 DuraStyle # 262943 Drop-in Foster # 033550 Countertop Happy D.2 # 231865 Drop-in Happy D.2 # 231880 Drop-in Happy D.2 # 231440 Countertop Happy D.2 # 231460 Happy D.2 # 231765 Happy D.2 PuraVida ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤* ≤* ≤* ≤* ≤* Drop-in ≤* Drop-in ≤* ≤ ≤ ≤ ≤* ≤ ≤ ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤* ≤ ≤ ≤* ≤* ≤* ≤* ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ # 231560 Countertop # 037070 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ PuraVida # 036970 Countertop Starck 1 # 040853 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 044753 Countertop ≤ ≤ Starck 1 # 044648 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 044546 Countertop ≤ Starck 1 # 040833 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 038647 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 038747 Starck 1 # 232144 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 232246 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ * only possible with space saving siphon / 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series 110 PL 14_News_US L-Cube Recommendation for ceramics + furniture for vanity unit for console Vanity unit for console (Please order console separately) 21 5/8" depth 1 compartment 2 drawers ≤ ≤* ≤* ≤* ≤* ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ # LC 6839 ≤ ≤* # LC 6838 ≤* # LC 6837 # LC 6829 ≤* # LC 6836 # LC 6828 ≤* # LC 6835 # LC 6827 ≤* # LC 6834 # LC 6826 # LC 6825 # LC 6824 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" 11 3/4" 15 3/4" 19 5/8" 23 5/8" 31 1/2" 39 3/8" ≤* ≤* ≤* ≤* Series Ceramic Ceramic type Starck 1 # 232748 Drop-in Starck 2 # 232360 Drop-in Starck 3 # 030348 Drop-in Starck 3 # 030256 Drop-in Vero # 045460 Countertop Vero # 045360 Countertop Vero # 045450 Countertop Vero # 045480 Countertop Vero # 045560 Countertop Vero # 045410 Countertop Vero # 045550 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 070445 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045250 Countertop ≤ ≤ Vero # 045260 Countertop Vero # 045470 Countertop Vero # 031550 Drop-in Vero # 031555 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤* ≤* ≤* ≤* ≤* ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤* ≤* ≤* ≤* ≤* * only possible with space saving siphon / 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 111 X-Large Recommendation for ceramics + furniture for vanity units for console Vanity unit for console (Please order console separately) 2) 18 7/8" depth 1 compartment 2 drawers 1) Drop-in 2nd floor # 049180 Drop-in 2nd floor # 031758 Drop-in 2nd floor # 034760 Drop-in 2nd floor # 031758 Countertop ≤ ≤ ≤ ≤ ≤ # XL 6512 # 049170 # XL 6511 2nd floor # XL 6510 Ceramic type Drop-in # XL 6502 Ceramic # 049160 # XL 6501 Series 2nd floor # XL 6500 23 5/8" 31 1/2" 39 3/8" 23 5/8" 31 1/2" 39 3/8" ≤ ≤ ≤ ≤ ≤ Architec # 032050 Countertop Architec # 032045 Countertop Architec # 032042 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Architec # 032040 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Architec # 031840 Drop-in Architec # 031845 Drop-in Architec # 046840 Drop-in Architec # 046847 Drop-in Architec # 047334 Drop-in Bacino # 032542 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033342 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033452 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045140 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045148 Countertop Darling New # 049747 Countertop ≤ ≤ ≤ D-Code # 033754 Drop-in DuraStyle # 034943 Countertop ≤ ≤ ≤ DuraStyle # 034960 Countertop ≤ ≤ ≤ DuraStyle # 037243 Drop-in ≤ ≤ ≤ Durastyle # 037456 Drop-in ≤ ≤ ≤ Durastyle # 037260 Drop-in ≤ ≤ ≤ Durastyle # 037337 Drop-in Durastyle # 037462 Drop-in Foster # 033550 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Happy D.2 # 231865 Drop-in Happy D.2 # 231880 Drop-in Happy D.2 # 231810 Drop-in Happy D.2 # 231440 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Happy D.2 # 231460 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Happy D.2 # 231765 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Happy D.2 # 231560 Countertop ≤ ≤ ≤ ≤ Happy D.2 # 048360 Drop-in Manua # 522048 Drop-in PuraVida # 037070 Countertop Santosa # 046651 Drop-in Starck 1 # 040853 Countertop 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series 112 PL 14_News_US X-Large Recommendation for ceramics + furniture for vanity units for console Vanity unit for console (Please order console separately) 2) 18 7/8" depth 1 compartment 2 drawers 1) Countertop Starck 1 # 044546 Countertop Starck 1 # 040833 Countertop Starck 1 # 038647 Countertop Starck 1 # 038747 Countertop Starck 1 # 232144 Countertop Starck 1 # 232246 Countertop Starck 1 # 232748 Drop-in Starck 2 # 232360 Drop-in # XL 6512 # 044648 # XL 6511 Starck 1 # XL 6510 Ceramic type Countertop # XL 6502 Ceramic # 044753 # XL 6501 Series Starck 1 # XL 6500 23 5/8" 31 1/2" 39 3/8" 23 5/8" 31 1/2" 39 3/8" ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 3 # 030549 Drop-in Starck 3 # 030348 Drop-in Starck 3 # 030256 Drop-in Vero # 045460 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045360 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045450 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045480 Countertop ≤ ≤ ≤ ≤ Vero # 045410 Countertop Vero # 045560 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045550 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 070445 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045250 Countertop Vero # 045260 Countertop Vero # 045470 Countertop Vero # 031550 Drop-in Vero # 031555 Drop-in Vero # 033048 Drop-in ≤ ≤ 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 113 X-Large Recommendation for ceramics + furniture for vanity units for console Vanity unit for console (Please order console separately) 2) 21 5/8" depth 1) # XL 6716 ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Ceramic Ceramic type # 049160 Drop-in 2nd floor # 049170 Drop-in ≤ 2nd floor # 049180 Drop-in ≤ 2nd floor # 031758 Drop-in 2nd floor # 034760 Drop-in 2nd floor # 031758 Countertop ≤ Architec # 032050 Countertop Architec # 032045 Countertop Architec # 032042 Architec # 032040 Architec Architec # XL 6718 # XL 6714 # XL 6715 ≤ Series 2nd floor # XL 6717 # XL 6713 # XL 6719 23 5/8" 31 1/2" 39 3/8" 23 5/8" 31 1/2" 39 3/8" 31 1/2" ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ Countertop ≤ ≤ # 031840 Drop-in ≤ ≤ ≤ # 031845 Drop-in ≤ ≤ ≤ Architec # 046840 Drop-in Architec # 046847 Drop-in ≤ ≤ ≤ Architec # 047334 Drop-in ≤ ≤ ≤ Bacino # 032542 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033342 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033452 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045140 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045148 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ D-Code # 033754 Drop-in ≤ ≤ ≤ DuraStyle # 034943 Countertop ≤ ≤ ≤ DuraStyle # 034960 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ DuraStyle # 037243 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ Durastyle # 037456 Drop-in ≤ Durastyle # 037260 Drop-in Durastyle # 037337 Drop-in Durastyle # 037462 Drop-in Foster # 033550 Countertop Happy D.2 # 231865 Happy D.2 # 231880 Happy D.2 # 231810 Drop-in Happy D.2 # 231440 Countertop ≤ Happy D.2 # 231460 Countertop ≤ Happy D.2 # 231765 Countertop Happy D.2 # 231560 Countertop Happy D.2 # 048360 Drop-in Manua # 522048 Drop-in PuraVida # 037070 Countertop Santosa # 046651 Drop-in Starck 1 # 040853 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Drop-in ≤ Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 39 3/8" ≤ Darling New # 049747 ≤ 2 doors # XL 6811 opened compartment 2 drawers # XL 6810 1 compartment ≤ ≤ ≤ ≤ ≤ ≤ 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series 114 PL 14_News_US X-Large Recommendation for ceramics + furniture for vanity units for console Vanity unit for console (Please order console separately) 2) 21 5/8" depth 1) Series Ceramic Ceramic type # XL 6719 # XL 6713 # XL 6715 # XL 6717 # XL 6714 # XL 6716 # XL 6718 23 5/8" 31 1/2" 39 3/8" 23 5/8" 31 1/2" 39 3/8" 31 1/2" Starck 1 # 044753 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 044648 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 044546 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 040833 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 038647 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 038747 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 232144 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 232246 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 232748 Drop-in ≤ ≤ Starck 2 # 232360 Drop-in Starck 3 # 030549 Drop-in Starck 3 # 030348 Drop-in Starck 3 # 030256 Drop-in Vero # 045460 Vero ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ # 045360 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045450 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045480 Countertop ≤ ≤ ≤ ≤ ≤ Vero # 045410 Countertop Vero # 045560 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045550 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 070445 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045250 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045260 Countertop ≤ ≤ ≤ ≤ Vero # 045470 Countertop ≤ ≤ ≤ ≤ Vero # 031550 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ Vero # 031555 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ Vero # 033048 Drop-in ≤ 2 doors 31 1/2" 39 3/8" # XL 6811 opened compartment 2 drawers # XL 6810 1 compartment ≤ ≤ ≤ ≤ ≤ ≤ ≤ 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 115 2nd floor, Delos, DuraStyle, Fogo, Happy D.2, L-Cube, PuraVida, Vero, X-Large Recommendation for ceramics for pure consoles Minimum size A Minimum size B Cut-out for washbasin Cut-out for washbasin Cut-out for washbasin please do not mount any vanity unit in this area 2) Series Ceramic 1930 # 047658 Drop-in ≤ ≤ ≤ ≤ For all series Minimum size Vero with LED Vero X-Large PuraVida L-Cube Happy D.2 Fogo DuraStyle Delos 21 5/8" 22 1/4" 21 5/8" 21 5/8" 18 7/8" 21 5/8" 18 7/8" 21 5/8" 21 5/8" 18 7/8" 21 5/8" 21 5/8" 21 5/8" 2nd floor Console 1) A ≤ ≤ ≤ ≤ 39 3/8" 66 1/8" 41" 67 3/4" # 049160 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 2nd floor # 049170 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 35 3/8" 66 7/8" 37" 68 1/2" 2nd floor # 049180 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 39 3/8" --- 41" --- 2nd floor # 049112 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 55 1/8" --- 56 3/4" --- 2nd floor # 031758 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 57 1/8" 32 1/4" 57 7/8" 2nd floor # 034760 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 2nd floor # 031758 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 53 1/8" 29 1/8" 54 3/4" Architec # 032050 Countertop ≤ ≤ ≤ Architec # 032045 Countertop ≤ ≤ ≤ Architec # 032042 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Architec # 032040 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Architec # 031840 Drop-in ≤ ≤ ≤ ≤ ≤ Architec # 031845 Drop-in ≤ ≤ ≤ ≤ Architec # 046847 Drop-in ≤ ≤ ≤ Architec # 047334 Drop-in ≤ ≤ ≤ ≤ Bacino # 032542 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033342 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bacino # 033452 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045140 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ Bagnella # 045148 Countertop ≤ ≤ ≤ ≤ ≤ Cape Cod # 232848 Countertop ≤ ≤ ≤ ≤ Cape Cod # 234046 Countertop ≤ ≤ ≤ ≤ Cape Cod ≤ ≤ ≤ ≤ 59" A B with LED with LED 2nd floor 33 1/8" 60 5/8" ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 47 1/4" 27 1/2" 51 1/8" ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 45 1/4" 27 1/2" 49 1/4" ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 43 1/4" 27 1/2" 43 1/4" ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 43 1/4" 27 1/2" 43 1/4" ≤ ≤ ≤ ≤ 31 1/2" 51 1/8" 33 1/8" 52 3/4" ≤ ≤ ≤ ≤ 31 1/2" 53 1/8" 33 1/8" 54 3/4" ≤ ≤ ≤ ≤ ≤ 31 1/2" 53 7/8" 33 1/8" 55 1/2" ≤ ≤ ≤ ≤ ≤ 27 1/2" 44 7/8" 29 1/8" 46 1/2" ≤ ≤ ≤ ≤ 19 5/8" 39 3/8" 19 5/8" 39 3/8" ≤ ≤ ≤ ≤ 19 5/8" 39 3/8" 19 5/8" 39 3/8" ≤ ≤ ≤ ≤ ≤ 23 5/8" 49 1/4" 23 5/8" 49 1/4" ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 39 3/8" 19 5/8" 39 3/8" ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 19 5/8" 43 1/4" ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 49 1/4" 23 5/8" 49 1/4" ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 49 1/4" 23 5/8" 49 1/4" ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 49 5/8" 23 5/8" 49 1/4" ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 45 1/4" 23 5/8" 45 1/4" ≤ 59" 32 1/4" 59 7/8" # 233950 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Darling New # 049747 Countertop ≤ ≤ ≤ ≤ ≤ ≤ D-Code # 033754 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 53 1/8" 30 3/4" 56 1/4" DuraStyle # 034943 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 43 1/4" 23 5/8" 43 1/4" DuraStyle # 034960 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 55 1/8" 27 1/2" 55 1/8" DuraStyle # 037243 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 44 1/2" 27 1/2" 48 3/8" Durastyle # 037456 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 53 1/8" 31 1/2" 57 1/8" Durastyle # 037260 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 55 1/8" 31 1/2" 55 1/8" Durastyle # 037462 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 53 1/8" 33 7/8" 59 1/2" DuraStyle # 263152 Drop-in ≤ ≤ ≤ ≤ ≤ 15 3/4" 58 1/4" 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series 116 B PL 14_News_US --- --- 2nd floor, Delos, DuraStyle, Fogo, Happy D.2, L-Cube, PuraVida, Vero, X-Large Recommendation for ceramics for pure consoles 2) Series Ceramic Foster # 033550 Countertop ≤ ≤ Happy D.2 # 231865 Drop-in ≤ ≤ ≤ Happy D.2 # 231880 Drop-in ≤ ≤ ≤ Happy D.2 # 231810 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 1) A B A B with LED with LED ≤ ≤ ≤ 19 5/8" 41 3/8" 21 1/4" 42 1/8" ≤ ≤ ≤ ≤ 31 1/2" ≤ ≤ ≤ ≤ 35 3/8" 70 7/8" 40 1/8" 75 5/8" ≤ ≤ 43 1/4" 86 5/8" ≤ ≤ 19 5/8" 39 3/8" 25 1/4" 44 7/8" ≤ ≤ ≤ ≤ ≤ ≤ ≤ For all series Minimum size Vero with LED Vero X-Large PuraVida L-Cube Happy D.2 Fogo DuraStyle Delos 21 5/8" 22 1/4" 21 5/8" 21 5/8" 18 7/8" 21 5/8" 18 7/8" 21 5/8" 21 5/8" 18 7/8" 21 5/8" 21 5/8" 21 5/8" 2nd floor Console ≤ ≤ 61" 34 5/8" 64 1/8" 48" 89 3/8" Happy D.2 # 231440 Countertop ≤ Happy D.2 # 231460 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 55 1/8" 33 1/8" 59 7/8" Happy D.2 # 231765 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 29 1/2" 57 1/8" 33 7/8" 63 3/8" Happy D.2 # 231560 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 59" ≤ ≤ ≤ ≤ ≤ 51 1/8" 102" 52 3/4" --- ≤ ≤ ≤ ≤ 35 3/8" 63" 37" 64 5/8" Happy D.2 # 231812 Countertop ≤ ≤ ≤ ≤ Happy D.2 # 048360 Drop-in ≤ ≤ ≤ ≤ Manua # 522048 32 1/4" 59 7/8" Drop-in ≤ ≤ ≤ ≤ ≤ 27 1/2" 50 3/8" 29 1/8" ME by Starck # 033342 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 39 3/8" 19 5/8" 39 3/8" ME by Starck # 033452 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 23 5/8" 49 1/4" 23 5/8" 49 1/4" PuraVida # 037070 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 27 1/2" 59" 30 3/4" 62 1/4" PuraVida # 036970 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 31 1/2" 63" 31 1/2" ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 19 5/8" 43 1/4" ≤ ≤ ≤ 52" 63" Starck 1 # 040853 Countertop ≤ Starck 1 # 044753 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 19 5/8" 43 1/4" Starck 1 # 044648 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 19 5/8" 43 1/4" Starck 1 # 044546 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 19 5/8" 43 1/4" Starck 1 # 040833 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 27 1/2" 20 7/8" 30 3/4" Starck 1 # 038647 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 20 1/2" 44 1/8" Starck 1 # 038747 Countertop ≤ ≤ ≤ ≤ Starck 1 # 232144 Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 # 232246 Countertop ≤ ≤ # 232748 Drop-in ≤ ≤ Starck 2 # 232360 Drop-in ≤ ≤ Starck 3 # 030348 Drop-in ≤ ≤ Starck 3 # 030256 Drop-in ≤ ≤ Vero # 045460 Countertop ≤ ≤ ≤ Vero # 045360 Countertop ≤ ≤ Vero # 045450 Countertop ≤ Vero # 045480 Countertop ≤ Vero # 045410 Countertop Vero # 045560 Countertop Vero # 045550 Vero # 070445 Vero Vero ≤ ≤ ≤ ≤ ≤ ≤ ≤ 19 5/8" 43 1/4" 26" 49 5/8" ≤ ≤ ≤ 23 5/8" 43 1/4" 26" 49 5/8" ≤ ≤ ≤ ≤ 23 5/8" 43 1/4" 25 1/4" 48 7/8" ≤ ≤ ≤ ≤ 23 5/8" 47 1/4" 28 3/8" ≤ ≤ 31 1/2" ≤ ≤ ≤ 23 5/8" 47 1/4" 27 1/2" 51 1/8" ≤ ≤ 27 1/2" 53 1/8" 31 1/2" 53 1/8" ≤ ≤ 27 1/2" 55 1/8" 27 1/2" 55 1/8" ≤ ≤ 27 1/2" 55 1/8" 27 1/2" 55 1/8" ≤ ≤ ≤ 23 5/8" 47 1/4" 23 5/8" 47 1/4" ≤ ≤ ≤ 35 3/8" 70 7/8" 35 3/8" 70 7/8" ≤ ≤ ≤ ≤ 43 1/4" 86 5/8" 43 1/4" 86 5/8" ≤ ≤ ≤ ≤ 27 1/2" 55 1/8" 27 1/2" 55 1/8" ≤ ≤ ≤ ≤ ≤ 23 5/8" 47 1/4" 23 5/8" 47 1/4" ≤ ≤ ≤ ≤ ≤ 23 5/8" 45 1/4" 23 5/8" 45 1/4" ≤ ≤ ≤ ≤ 23 5/8" 47 1/4" 27 1/2" 51 1/8" ≤ ≤ ≤ ≤ 27 1/2" 55 1/8" 27 1/2" 55 1/8" ≤ ≤ ≤ 31 1/2" ≤ ≤ ≤ 23 5/8" 47 1/4" 27 1/2" 47 1/4" ≤ ≤ ≤ 51 1/8" ≤ ≤ ≤ 31 1/2" 57 1/8" 31 1/2" 57 1/8" ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Countertop ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ # 045250 Countertop ≤ ≤ ≤ ≤ ≤ ≤ # 045260 Countertop ≤ ≤ ≤ ≤ ≤ ≤ Vero # 045470 Countertop ≤ ≤ ≤ ≤ ≤ Vero # 031550 Drop-in # 045412 Countertop ≤ ≤ Vero # 031555 Drop-in ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤* ≤ ≤ ≤ ≤* ≤ ≤ ≤ ≤ 59" 52" ≤ ≤ ≤ ≤ ≤ ≤ ≤ Vero ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Starck 1 ≤ 63" --- 32 1/4" 59 7/8" 31 1/2" 51 1/8" 63" --- 1) measurements highlighted in a dark color = Width in inches; 2) measurements highlighted in a light color = Depth in inches / Only the listed ceramics are suitable for the furniture series PL 14_News_US 117 2nd floor, Fogo, Happy D.2, L-Cube, Vero, X-Large Order sheet for consoles (depth 18 7/8" / 21 5/8" mm) ClientOrder-No. SeriesDate DeadlineColor inch b= c= axial dimension from left-hand outside edge of console to center of washbasin cut-out. inchif a tap hole is to be drilled, please give the axial dimension from the left-hand outside edge of the console to the center of the tap hole. d= inch for drilling please also give the axial dimension from the rear edge of the console to the center of the tap hole. Infobox: X-Large und Happy D.2 console free standing: 2 console supports for consoles with a length up to 39 3/8", 3 console supports for consoles with a length of 39 1/2" - 55 1/8", 4 console supports for consoles with a length of 55 1/4" - 78 3/4". 78 3/4" 39 3/8" 59" Console support – towel rail # 9903* / 9917 19 5/8" inchoverall console length 7 7/8" a= 3 7/8" In order to ensure that the variable consoles we manufacture are a perfect fit, we need the following information/dimensions: 0 cut-out Console support bracket # 9902* d HL Console support – T-shaped # 9926* c HL = Tap hole drilling D = 1 3/8" (size specification optional) a b Please ensure that all of the required information is entered on the order form. The preprinted scale grid will make it easier to draw a plan of the console surface. Infobox: Individual solutions with variable-width consoles and flexible arrangement of low cabinets, console supports on request (include sketch) / Maximum console width: 78 3/4". Widths up to 106 1/4" on request / A stabilising console support is required for dual solutions or variable solutions over 47 1/4" / We recommend a clearance of approx. 23 5/8" with console basins and undercounter washbasins with no base vanity unit / If multiple vanity units for series Fogo are installed in a row, a 1/4" wide spacer is included but not assembled. unit / washbasin base unit Washbasin # Depth = 18 7/8" / 21 5/8" * please add respective identification code for series 118 PL 14_News_US General Terms Of Sale 1. Purchase of Products (a) Except to the extent other¬wise agreed upon in writing, the terms set forth herein shall govern the sale and delivery of the products described on the reverse side hereof (“Products”) by Duravit USA, Inc. (“Seller”) and purchased by the purchaser named on the reverse side hereof (“Purchaser”). (b) All dealings between the parties shall be in writing and no order of Purchaser shall be binding on Seller until approved in writing by Seller. (c) A purchase contract hereunder shall become effective only by written acceptance of Purchaser’s order by Seller via order confirmation. (d) Prices of Products are subject to change without notice, and all references in sales brochures, technical data sheets and offers as details of the Products are approximate only. No such term shall be binding on Seller unless expressly incorporated in a purchase order which is approved and accepted by Seller in accordance with the terms hereof. (e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s credit. Purchaser agrees that Seller may demand assurances of Purchaser’s ability to pay by requesting such trade or banking references or such other information as deemed adequate by Seller. (f) Specifications in offers and order confirmations are approximate only. Purchaser does not have the rights with respect to quality, color and design. (g) Special orders of Products may not be cancelled. Bold prices listed in this price list are stocked in our Atlanta warehouse for immediate delivery. Special order products, have an 8-12 week lead time. All special orders are non cancelable and may or may not comply with US standards. (h) Seller reserves the right to change its manufacturing specifications, as deemed necessary by Seller in Seller’s sole discretion, without prior notice to Purchaser. 2. Prices (a) All prices quoted by Seller are based upon Seller’s price list to be amended from time to time in U.S. funds and shall be on a net basis F.O.B. Seller’s loading dock. (b) All prices quoted by Seller are subject to adjustment due to Purchaser’s change orders, if any or change of Sellers quotation basis. (c) The price quoted excludes the cost of packaging, applicable taxes and duties, shipping, insurance or other incidental expenditures of Seller, unless otherwise expressly agreed upon in writing. Purchaser shall be liable for the cost of packaging, applicable taxes and duties, shipping, insurance or other incidental expenditures. 3. Payment (a) Unless otherwise expressly agreed upon in writing, payment shall be made in full within thirty (30) days of receipt of Seller’s invoice. (b) Purchaser shall not withhold or reduce payments on account of complaints, claims, or counterclaims not acknowledged and accepted by Seller. 4. Delivery (a) Unless expressly agreed upon in writing to the contrary, the terms of delivery are F.O.B. Seller’s loading dock. Seller will use commercially reasonable efforts to make the Products available for pick-up and delivery by Purchaser within a reasonable time after acceptance of an order from Purchaser. Delivery time period starts to run upon acceptance of any purchase order by Seller. All delivery dates are approximately only and Seller shall not be liable for damages caused by delays in delivery. (b) Purchaser agrees that it will pick up or cause a common carrier to pick up the Products at Seller’s place of busi¬ness within two (2) days after written notification from Seller that such Products are ready for pick-up. If Purchaser or its common carrier does not pick up or accept the Products within two (2) days after written notification from Seller that the Products are ready for pick-up or if Seller is required to store the Products due to any delay caused by Purchaser, Purchaser shall reimburse Seller for reasonable storage charges. If not picked up within given time frame, seller reserves the right to ship product at purchaser’s expense. (c) Purchaser bears the risk of loss or destruction of the Products upon and after the first to occur of (i) pick-up or acceptance of the Products by Purchaser or its common carrier at Seller’s place of business, or (ii) the second day after written notification from Seller that the Products are ready for pick-up at Seller’s place of business. In case Purchaser requests a delay in delivery, Purchaser assumes all risk of loss, damage and/or destruction of the Products from the date the Products are ready to be delivered. Damages must be reported within three (3) business days of delivery to the purchaser. Products delivered to Purchaser by the common carrier shall be inspected by Pur- chaser upon receipt. Purchaser may not withhold or reduce payments on account of such claims or any other complaints, claims or counterclaims not acknowledged and accepted by Seller. (d) Seller reserves the right to make the Products available for pick-up and delivery in install¬ments. Delay in delivery of any installment shall not relieve Purchaser of its obligation to accept remaining deliveries. (e) If Purchaser should request any modification of the order after Seller’s acceptance, Seller shall have the right to extend the delivery time period as reasonably needed to complete Purchaser’s change. (f) Claims for shortages must be made within five days from receipt of goods. Any claims of shipment not received must be reported to Duravit in writing within thirty days from the invoice date. 5. Force Majeure Notwithstanding anything to the contrary, Seller shall not be liable for any delay or failure to perform hereunder when such failure or delay is, directly or indirectly, caused by, or in any manner arises from fire, floods, accidents, civil unrest, acts of terrorism, acts of God, war, governmental interference or embargoes, strikes, labor difficulties, shortage of labor, fuel, power, materials, or supplies, breakage of machinery or apparatus, transportation delays, or any other cause or causes (whether or not similar in nature to any of those hereinbefore specified) beyond its control. 6. Default (a) Purchaser shall be in default (hereinafter “Default”) under this Agreement and Seller may terminate this Agreement and exercise all other remedies in law or in equity if Purchaser: (a) fails to make payment hereunder to Seller when due; or (b) breaches any other term, provision or condition contained in this Agreement; or (c) is declared to be in default under any other agreement between Purchaser and Seller. (b) Upon the occurrence of a Default, Seller may elect to exercise any one or more of the following options: (i)Seller may hold the Products until such time as Purchaser has paid the respective purchase price and any expenses (including finance charges, returned´check fees and interest) determined at a rate equal to the lower of eighteen percent (18 %) per annum or the maximum rate permitted by applicable law incurred by Seller as a consequence of such default. (ii) Seller may require payment in cash prior to delivery any Products hereunder. (iii) Seller may withhold any Products not delivered to Purchaser at the time of the default. (iv) Seller may terminate this Agreement. (v) Seller may sell the Products to a third party and require Purchaser to reimburse Seller for any losses, or expenses associated therewith. (vi) Seller may exercise all other rights hereunder and may seek all other remedies available to it in law or in equity. (vii) Seller may assign all claims against Purchaser to any third party. (viii) Upon the non-payment when due of any amount due hereunder, any and all of the debts and liabilities of Purchaser to the Seller arising may, at the option of the Seller and without demand or notice of any kind be declared and immediately shall become due and payable in full. Seller may exercise any rights available under any agreement relating to any liability of Purchaser to Seller. (c) Purchaser agrees that, in the event any legal action should be deemed necessary by Seller to recover any sums due hereunder or under any promissory note, trade acceptance, or invoice, or, if applicable, to recover possession of the Products, as defined herein above, or any proceeds from the sales thereof, there shall be added to the sums due from Purchaser to Seller the costs of collection, including reasonable attorney’s fees. (d) When reasonable grounds for insecurity arise with respect to Purchaser’s performance, Seller may in writing demand assurance of due performance and until it receives such assurance may suspend any performance for which it has not already received payment. 7. Returns Under no circumstances will Duravit accept the return of merchandise without express written authorization. Any discontinued or special order items are not eligible for return including but not limited to system tubs and special order furniture. Any merchandise ordered in error or cancelled (excluding special order items) will be assessed at 25% restock fee within 60 days of the shipping or invoice date. A 50% restock fee applies within 61 to 120 days of invoice date. No merchandise will be authorized for return after a period of 120 days from invoice date. Product must be returned no later than sixty days after the date of the return goods authorization. A rebox fee may apply. All transportation for return goods must be paid by customer. For further information, please refer to our return goods policy. 8. Warranties and Claims (a) Seller warrants that (i) the Products shall, when delivered, substantially comply with the Product descriptions and (ii) Seller shall convey good and marketable title to Purchaser and that the Products will be delivered free from any lawful lien, claim or encumbrance other than any lien arising hereunder. (b) Purchaser shall within five (5) working days after the occurrence of the material defect give written notice to Seller of any claim that the Products do not conform with the terms of the order or have material defects which a casual inspection would disclose. If Purchaser fails to give such notice, the Products shall be deemed to conform with the terms of the order, and Purchaser shall be deemed to have accepted and shall pay for the Products in accordance with the terms of this order. Purchaser expressly waives any right Purchaser may have to revoke acceptance or claim a breach of warranty with respect to such obvious or material defects, a casual inspection should have disclosed after such five-day period. (c) Duravit grants a guarantee period of 5 years for all sanitary ceramic, acrylicware and furniture and 1 year for SensoWash and 1 year for all parts to be free of any manufacturing defect that would have direct effect on the practical application of the item. Duravit grants a guarantee period of 1 year for all whirl systems and accessories, providing that the installation is carried out by a certified plumber and electrician. Certain variances and tolerances are characteristic of vitreous china products that are fired at high temperatures which are therefore acceptable. Duravit assumes no obligation other than the replacement of defective parts upon presentation along with proof of purchase to selling distributor. Duravit does not indemnify any related labor charges, removal and reinstallation expense, freight, postage or any incidental or consequential damages resulting from a defective product. This limited warranty is in lieu of our other warranties, implied or expressed. Some states do not allow the exclusion/ limitation of incidental or consequential damages, therefore the above limitation may not apply to you. This limited warranty gives you specific legal rights and you may also have other rights which vary from state to state. THIS WARRANTY SHALL APPLY ONLY IF THE PRODUCT HAS BEEN IN ACCORDANCE WITH THE DURAVIT OPERATING INSTRUCTIONS PROPERLY INSTALLED, USED AND SERVICED. ANY UNAUTHORIZED ALTERATIONOR MODIFICATION OF THE PRODUCT WILL VOID THIS WARRANTY. SELLER SHALL NOT BE LIABLE FOR ANY CLAIMS RESULTING FROM MISUSE, NEGLIGENCE, MODIFICATION, ABUSE, IMPROPER OR FAULTY USE, IMPROPER PRODUCT APPLICATION OR STORAGE, NORMAL WEAR AND TEAR, FAILURE TO COMPLY WITH SELLER’S INSTRUCTIONS, IMPROPER FUNCTION OF ANY PARTS OR MATERIALS SUPPLIED BY PURCHASER, IMPROPER OR FAULTY MANUFACTURING DUE TO DEFECTIVE OR IMPROPER PARTS, MATERIALS OR DESIGNS AND BLUE PRINTS PROVIDED BY PURCHASER. SELLER SHALL FURTHER NOT BE LIABLE FOR ANY CLAIMS ARISING OUT OF AND RESULTING FROM DEFECTIVE AND FAULTY PARTS, COMPONENTS OR MATERIALS PROVIDED BY ANY THIRD PARTY TO SELLER AND SHALL ASSIGN ANY RELATED RIGHTS OR CLAIMS THAT SELLER HAS AGAINST SUCH THIRD PARTY TO PURCHASER. THE WARRANTIES SET FORTH HEREINABOVE ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. THE SALE IS MADE ON THE EXPRESS UNDERSTANDING THAT THERE IS NO IMPLIED WARRANTY THAT THE PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT PURCHASER IS NOT RELYING ON SELLER’S SKILLS OR JUDGMENT TO SELECT OR FURNISH PRODUCTS SUITABLE FOR ANY PARTICULAR PURPOSE OR JOB OR TO DETERMINE FEASIBILITY OF THE PRODUCTS FOR ANY PARTICULAR PURPOSE. FURTHER THE PURCHASER ACKNOWLEDGES THAT THERE ARE NO WARRANTIES´WHICH EXTEND BEYOND THE DESCRIPTION HEREIN. SELLER SHALL IN NO EVENT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES, AND DAMAGES ARISING OUT OF THE PURCHASE, UNLOADING, HANDLING, AND USE OF ANY PRODUCTS, ALL OF WHICH ARE WAIVED BY PURCHASER AND IN ANY EVENT, DAMAGES HEREUNDER SHALL BE LIMITED TO A MAXIMUM OF THE PURCHASE PRICE. THIS WARRANTY GIVES THE CONSUMER SPECIFIC LEGAL RIGHTS AND THE CONSUMER MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. efit, except Seller agrees to the contrary in writing. Purchaser may not use or register intellectual property rights of Seller, including but not limited to trademarks, designs and patents. Purchaser shall notify Seller of any existing or threatened violations of Seller’s intellectual property rights as soon as he becomes aware of any such existing or threatened violation. Purchaser agrees to sell Products in their original packaging and design without modification. 10. Miscellaneous (a) Purchaser may not assign this contract without the express prior written consent of Seller. (b) Except as otherwise expressly provided in Section 1(e) hereof or in a written document, signed by Seller and Purchaser, this document and attachments and exhibits thereto constitute the entire agreement between Seller and Purchaser with respect to the subject matter herein contained and all prior agreements and communications between Seller and Purchaser, whether oral or written, are superseded by this Agreement. c) No modification, limitation, waiver or discharge of this Agreement or of any of its terms shall bind Seller unless in writing and signed by a duly authorized employee of Seller. The failure of Seller to insist, in one or more instances, on performance by Purchaser in strict compliance with the terms and conditions hereof shall not be deemed a waiver or relinquishment of any right granted hereunder with respect to any succeeding breach of the same or other provision hereof. (d) In connection with any litigation, including appellate proceedings, arising out of or pertaining to any of the contractual relationships between Seller and Purchaser or the breach thereof, as contemplated herein, all costs and expenses, including reasonable attorneys fees, shall be borne by the losing party or, as the case may be, shall be prorated to properly reflect any partial losing or prevailing of the parties to such litigation. (e) This Agreement shall be governed by, and construed, interpreted and enforced under the laws of the State of Georgia without giving effect to the conflict of laws principles. (f) All notices required hereunder shall be in writing and sent by first class mail or by telefax or written confirmation to such addresses as stated on the reverse side hereof. (g) In case any conditions of this Agreement should be or become unenforceable under applicable law, the remaining provisions, stipulations and conditions of this Agreement shall not be affected thereby. 11. Arbitration Any controversy of claim arising out of or relating to this Agreement, or the breach hereof, shall be submitted to and be finally resolved by arbitration, to be conducted by the American Arbitration Association (“AAA”), with such arbitration to be held in Atlanta, Georgia in accordance with the AAA’s Commercial Arbitration Rules then in effect. Each party hereby irrevocably agrees that service of process, summons, notices, as other communications related to the arbitration procedures shall be deemed served and accepted by the other party five (5) working days after having been mailed by first class registered mail, return receipt requested, postage prepaid, to the other party, or if actually received by the other party. The arbitration shall be conducted by one arbitrator, as selected by the AAA. Any award or decision rendered in such arbitration shall be final and binding on both parties, and judgment may be entered thereon in any court of competent jurisdiction if necessary. Except as may be provided to the contrary herein, each party hereto shall pay any and all expenses incurred by such party in connection with such arbitration proceeding, unless otherwise determined by the arbitrator. THIS PRICE LIST SUPERSEDES ANY AND ALL PREVIOUS PRICE LISTS. 9. Intellectual Property Rights No concepts, designs, blueprints, proposals or other data developed by Seller for Purchaser shall be deemed work for hire and all rights respective thereto shall solely be with Seller and any further development thereof shall ensue to Seller’s ben- PL 14_News_US 119 Color code 20 – HygieneGlaze White Color 00 – White Color chart ceramics / metal Ceramics Cape Cod ≤ . DuraStyle ≤ . ME by Starck ≤ ≤ P3 Comforts ≤ ≤ Metal finishes 00 White 10 Chrome 120 PL 14_News_US 2nd floor Blue Moon Darling New DuraStyle P3 Comforts Paiova PuraVida Starck Sundeck Vero Bathtub panels / Wellness products - Color chart furniture surfaces 76 Europ. Oak solid wood . . . . . . . . . . 77 Amer. Walnut solid wood . . . . . . . . . . 81 White Beech solid wood . . . . . . . . . . 95 Vintage Oak solid wood . . . . . . . . . . 05Oak . . ≤ ≤ . . ≤ . . ≤ . 12 Brushed Oak ≤ 13 American Walnut . ≤ ≤ . . ≤ . 24Macassar ≤ ≤ ≤ 26 Americ. Cherry Tree . ≤ . ≤ . ≤ . Real wood massive Real wood veneer 59Ebony ≤ ≤ . . ≤ . ≤ . . . ≤ ≤ ≤ . ≤ . ≤ . . ≤* ≤ ≤ . ≤ . . . ≤ . . . . . . . . . . . . . . . ≤ ≤ . . ≤ . 71 Mediterranean Oak ≤ 72 Brushed Dark Oak . . ≤ 01 Cherry Tree (Outdoor) . 02 Wengé (Outdoor) . 14Terra . 18 White Matt . . 22 White High Gloss . 31 Pine Silver 69 Brushed Walnut ≤ . ≤ . ≤ . . . . . ≤ . . . 37 White Aluminum . . 43 Basalt Matt . . 49 Graphite Matt . . 51 Pine Terra . . 52 European Oak . . 53 Chestnut Dark . 70Aluminum . ≤ 73 Ticino Cherry Tree . . 75Linen . . 79 Natural Walnut . ≤ ≤ . ≤ . . . . . ≤ ≤ . . ≤ ≤ ≤ . . ≤ ≤ . ≤ 65 Bleached Oak ≤ . ≤ 62 Anthracite Oak ≤ . ≤ . ≤ . ≤ . . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ ≤ ≤ ≤ ≤ ≤ ≤ Decor ≤ . . . ≤ ≤ ≤ . . . ≤ ≤ ≤ . . ≤ . . . . . . . ≤ . . . . ≤ . . ≤ ≤ ≤ . ≤ . ≤ ≤ . ≤ . ≤ . ≤ ≤ ≤ . . ≤ ≤ ≤ . ≤ . ≤ . . ≤* ≤ ≤ . . . . . . ≤ ≤ ≤ ≤ ≤ . ≤ ≤ ≤ ≤ . . . . . ≤ ≤ ≤ ≤ . ≤ . ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ . ≤ 03 Jade High Gloss . . . . . . . . . . 10 Apricot Pearl High Gloss . . . . . . . . . . 20 Apricot Pearl Satin Matt . . . . . . . . . . 27 White Lilac High Gloss . . . . . . . . . . 38 Dolomiti Grey High Gloss . . . . . . . . . . 40 Black High Gloss . . . . . . . . . 47 Stone Blue High Gloss . . . . . . ≤* . . . . 61 Olive Brown High Gloss . . . . . . . . . . 85 White High Gloss . . . . . . . . . 86 Cappuccino High Gloss . . . . . . ≤* . . . . 87 White Lilac Satin Matt . . . . . . . . . . 88 Red High Gloss . . . . . . . . . 89 Flannel Grey High Gloss . . . . . . ≤* . . . . 90 Flannel Grey Satin Matt . . . . . . . . . . . . . . ≤ . Acryl 82 Acrylic White Lacquer * only shadow gap ** only furniture cover PL 14_News_US 121 Happy D.2 Ketho L-Cube Universal Mirrors PuraVida Starck Vero X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ . . . ≤ . Cape Cod . . 2nd floor . ≤ . ≤ ≤ DuraStyle . . Delos . ≤** Darling New Fogo Bathroom furniture - Color chart furniture surfaces Real wood massive 76 Europ. Oak solid wood 77 Amer. Walnut solid wood . 81 White Beech solid wood . 95 Vintage Oak solid wood . ≤** Real wood veneer 05Oak . . . . . . . . . . . 12 Brushed Oak . . . . . . . . . ≤ . . ≤ . 24Macassar ≤ ≤ . . ≤ . . ≤ . 13 American Walnut ≤ . . . 26 Americ. Cherry Tree . . . . . ≤ . . ≤ . ≤ ≤ . . ≤* . ≤ 59Ebony ≤ ≤ . . . ≤ ≤ . . . . . . . ≤ ≤ . . . ≤ ≤ ≤ . ≤ . ≤ ≤ . . . ≤ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ . . ≤ . . ≤ . 71 Mediterranean Oak ≤ . . . ≤ 72 Brushed Dark Oak . . ≤ ≤ ≤ . ≤ ≤ ≤ . . . ≤ ≤ 01 Cherry Tree (Outdoor) . . 02 Wengé (Outdoor) . . 14Terra . . 18 White Matt . . 22 White High Gloss . . 31 Pine Silver . . 37 White Aluminum . . 43 Basalt Matt . . 49 Graphite Matt . . 51 Pine Terra . . 52 European Oak . . 53 Chestnut Dark . . 70Aluminum . . 73 Ticino Cherry Tree . . 75Linen . . 79 Natural Walnut . 62 Anthracite Oak 65 Bleached Oak 69 Brushed Walnut ≤ ≤ . ≤ . ≤ ≤ ≤ . . . . . . . . . . . . . . . . . . . . . . . . ≤ ≤ ≤ ≤ . ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ . . Decor ≤ ≤ . ≤ ≤ . ≤ ≤ . ≤ ≤ . . ≤ ≤ ≤ ≤ . ≤ ≤ ≤ ≤ . ≤ ≤ ≤ . ≤ ≤ ≤ . ≤ ≤ ≤ . ≤ . . . . ≤ . . . ≤ . . . ≤ . . . . ≤ . . . . ≤ ≤ . . . ≤ ≤ . . . ≤ . . . ≤ ≤ . . . . . . ≤ ≤ . ≤* . . . . . . . ≤ ≤ . . ≤ . ≤ ≤ . . . ≤ ≤ . ≤ ≤ . ≤ . ≤ ≤ ≤ ≤ . ≤ ≤ ≤ ≤ . . . . . . . . . . 03 Jade High Gloss . . . . ≤ ≤ . 10 Apricot Pearl High Gloss ≤ ≤ 20 Apricot Pearl Satin Matt . . . . ≤ . 27 White Lilac High Gloss ≤ 38 Dolomiti Grey High Gloss . . . 40 Black High Gloss . . ≤ 47 Stone Blue High Gloss . . . . ≤ . 61 Olive Brown High Gloss ≤ ≤ ≤ ≤ . 87 White Lilac Satin Matt . . . . ≤ . 88 Red High Gloss ≤ 89 Flannel Grey High Gloss . . 90 Flannel Grey Satin Matt . . . . . . ≤ . ≤ ≤ . ≤ ≤ . ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ . ≤ ≤ . ≤ ≤ . ≤ ≤ . . . . ≤ ≤ ≤ ≤ . . Acryl 82 Acrylic White Lacquer 85 White High Gloss 86 Cappuccino High Gloss * only console ** only furniture accessoires 122 PL 14_News_US . . ≤ ≤ ≤ ≤ ≤ ≤ ≤ . ≤ ≤ ≤ . ≤ . ≤ . ≤ . ≤ . . . ≤ . ≤ . . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . ≤ . . . . . ≤ . . . . ≤ . . . ≤ . . . ≤ . . . ≤ . . . ≤ . . . ≤ . ≤ . ≤* ≤ ≤ . . . ≤ ≤ ≤ ≤ ≤ . . . . . . ≤ . ≤* . . . . ≤ ≤ . . . . . . ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ . ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ . ≤ ≤ Sanitary colors 00 White 20 HygieneGlaze White Colors shower trays DuraSolid Q 38White 48Sand 68Anthracite Furniture surfaces Real wood massive 77 Amer. Walnut solid wood 81 White Beech solid wood 95 Vintage Oak solid wood 05Oak 12 Brushed Oak 13 American Walnut 24Macassar 26 Americ. Cherry Tree 59Ebony 62 Anthracite Oak 65 Bleached Oak 69 Brushed Walnut 71 Mediterranean Oak 01 Cherry Tree (Outdoor) 02 Wengé (Outdoor) 14Terra 18 White Matt 22 White High Gloss 31 Pine Silver 37 White Aluminum 43 Basalt Matt 49 Graphite Matt 51 Pine Terra 52 European Oak 53 Chestnut Dark 70Aluminum 73 Ticino Cherry Tree 75Linen 03 Jade High Gloss 10 Apricot Pearl High Gloss 20 Apricot Pearl Satin Matt 27 White Lilac High Gloss 38 Dolomiti Grey High Gloss 40 Black High Gloss 47 Stone Blue High Gloss 61 Olive Brown High Gloss 85 White High Gloss 86 Cappuccino High Gloss 87 White Lilac Satin Matt 88 Red High Gloss 89 Flannel Grey High Gloss 90 Flannel Grey Satin Matt 76 Europ. Oak solid wood Real wood veneer 72 Brushed Dark Oak Decor 79 Natural Walnut Acryl 82 Acrylic White Lacquer for the pro > Duravit USA, Inc. 2205 Northmont Pkwy., Ste. 200 Duluth, GA 30096 Toll Free 888-DURAVIT Phone 770-931-3575 Fax 770-931-8454 [email protected] www.duravit.us pro.duravit.us Best.-Nr. 001242 / 16.09.15.8.1 · Printed in Germany ∙ We reserve the right to make technical improvements and enhance the appearance of the products shown. Duravit NYC 105 Madison Avenue New York, NY 10016 Toll Free 888-DURAVIT Phone 212-686-0033 Fax 212-686-8033 [email protected] www.duravit.nyc