Big Button Flip Easyphone

Transcription

IMPORTANT SAFETY INSTRUCTIONS
Safety precautions
• If your mobile phone is lost or stolen, please inform local telecommunication department or
distributor to disable the mobile phone and SIM card. It will prevent the phone being used by
someone else.
• When you contact telecommunication department, they will ask you the IMEI number (It is printed on
the label in the rear of the mobile phone and you will find it after removing the battery). Please write
down this number and keep it safe for future use.
• To avoid your phone being used by someone else, please take preventative measures, for example:
• Set PIN code of the SIM card and modify in time.
• Do not leave your mobile phone in your car where anyone can see it, do not leave it unattended.
• Set call barring.
Safety warnings and precautions
• Mobile phone:
• Please use this mobile phone in an environment with temperatures between 5°C and 40°C and
humidity between 35% and 85%.
• Try to use this mobile phone in places away from a normal telephone, TV set, radio and OA
equipment to avoid affecting the performance of these devices and the mobile phone.
• Battery:
• Put the battery in places with good ventilation and avoid direct sunlight.
• The service life of mobile phone battery is limited. The usage time of battery will be shortened
gradually after frequent charging. If the charging is invalid for several times, it indicates that the
service life of the battery has reached its end and you need to replace the battery.
• Do not drop used battery into common domestic refuse. Please follow local regulations if the
disposal of used battery is stipulated clearly.
• Charger:
• Do not charge at the following places: in direct sunlight; in environments with temperatures lower
than 5°C or higher than 40°C; with moisture, too much dust or vibration (may cause fault); near TV
set, radio or other electric apparatus (may affect video and audio quality).
Big Button Flip Easyphone
INSTRUCTION MANUAL
Buttons
and screen
are large
and highly
legible
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of paper and cardboard packaging separately from plastic bags into the
corresponding containers.
• Dispose of the appliance at the end of its life span according to environmental considerations.
WARNING
This product is intended for domestic use only.
TECHNICAL SPECIFICATION
Maximum load: 80g Measurements: L10xW5xD2cm
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Customer service: 0871 855 6100
Model No. EL4966
Please read carefully before use and keep for future reference
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN4966-1 © 2012 Easylife Group Ltd
Dear Customer
Thank you for purchasing the Big Button Flip Easyphone.
Missed calls are a thing of the past with our Flip Camera
Phone. Even if you’re a little hard of hearing the extra-loud
ringing tone - up to 80dB - is impossible to ignore. The nonfiddly big button keypad is simple to use while the highcontrast colour display means no more squinting or changing
glasses. With practical functions, including SMS and MMS,
Camera, Image viewer, Video recorder, Video player, Audio
player, Sound recorder, FM radio, Calendar, Calculator,
GPRS network and keypad lock it will make your work and
entertainment more convenient. With a flip-shut cover to
prevent scratching and accidental dialling, our Mobile Phone
is GSM900/1800MHz dual-band and suitable for most
countries, like Europe, Africa, Middle East, Australia and
more, apart from the USA. Supplied ‘unlocked’ for use on any
UK network except operator ‘3’.
BEFORE USE
Keys description
• The Number keys: Input numbers and characters; customise
number keys 2-9 as the shortcuts of quick dial.
• The Right soft key: Execute the functions displayed in lower
right corner of the screen. And you can use it to delete the
anterior letter near the cursor which you have input in the
message or exit the interface of editing when there is no
letter in the message.
• The Left soft key: Execute the functions displayed in lower
left corner of the screen. In the standby state, press it to
enter Main menu.
• The Dial key: It is used to make a phone call and answer the
incoming calls for SIM1 or SIM2; in standby state, adjust the
record of the Missed calls, the Dialed calls and the Received
calls for SIM1 and SIM2.
• The Hang_Up key: It is used to end a call or reject an
incoming call. Generally press this key to return to standby.
Press and hold this key to open/close the mobile phone.
• Up/down key: Press it to browse names, telephone
numbers, SMS, MMS, submenus and so on; move cursor
while editing.
• OK key: In Standby state, press it to enter the main menu.
• The * key: Input special symbols and punctuation; in
standby state, press this key continuously to switch among
*, +, P and W, press and hold this key to carry out the quick
dial function .
• The # key: Press this key to input # or switch the input
methods while editting; in standby state, press and hold this
key to carry out the quick dial function.
Note: In this manual, press a key means to press the key
and release; press and hold a key means to press the key
and hold for no less than 2 seconds.
Lateral key description
• The Torch key and the FM key: In the standby state, press
and hold the Torch key to turn on or turn off the torch in the
phone, press and hold the FM key to enter the FM radio;
generally press the two keys to magnify or reduce the
volume; they can also be used to set the parameters for
some menus.
• SOS key: On the back of the phone, there is a SOS key. If
the SOS number and the SOS message have been edited
and saved, when pressing and holding this key, the phone
will dial the SOS number after sending out an SOS message
to the appointed numbers.
Battery
The battery in original state has about 50% electricity quantity
and you can use it after unpacking. It performs best after full
charge/discharge for the first three times.
Charging the battery
• Plug the charger into wall socket.
• Insert the plug of the charger into the bottom of mobile phone
(keep the surface with arrow upwards).
• If the mobile phone is on when being charged, the electricity
quantity indicator on upper right corner of the screen will
be flashing circularly; if the mobile phone is off when being
charged, a charging indicator image will appear on the
screen which indicates the battery is being charged. If the
mobile phone is still used when battery is low, the charging
indicator will appear after being charged for a while.
• When charging is finished, there will be one image displayed
on the screen which indicates that charging has finished. If
the mobile phone is on, the battery status indicator on upper
right corner of the screen is complete and won’t flash. It may
take 3-4 hours to fully charge the battery. It is normal that the
battery, mobile phone and charger get hot when charging.
• Disconnect the AC outlet from mobile phone and charger
when charging is complete.
Note:
• Use charger approved by manufacturer to charge in
ventilated places with temperature between 5°C and 40°C.
It is dangerous to use an unauthorized charger and you will
also violate the warranty clause.
• Please charge the battery in time if the mobile phone
automatically switches off or indicates “Low battery”. If the
battery hasn’t been run out before charging, the charging
time will be shortened automatically.
• The standby and call time provided by manufacturer are
based on ideal working environment. The working time
of battery depends on network status, environment and
operating method in practice.
• Make sure the battery is installed properly before charging
and don’t remove the battery during charging.
• Disconnect the charger from mobile phone and power supply
after charging.
• If you don’t disconnect the charger from power supply and
mobile phone, the mobile phone will be charged again (after
about 5 to 8 hours) and the energy of the battery is wasted
to a certain degree. It is not recommended because it will do
harm to the performance and service life of the battery.
Connecting to network
SIM card
You must insert at least one valid SIM card before using your
mobile phone. SIM card is the key for you to access digital
GSM/GPRS network.
All information about network connection and call initialization,
as well as the names and telephone numbers of Contacts and
short messages you have received and saved, are recorded
in the metal surface area of the SIM card. You can remove the
SIM card from your mobile phone and insert it into any other
GSM mobile phone (the new mobile phone will read the SIM
card automatically).
Do not touch the metal surface area and keep the SIM card
away from electricity and magnetism to avoid losing or
damaging the information saved in SIM card. You can’t access
GSM/GPRS network if the SIM card is damaged.
Warning: Please switch off the mobile phone before
removing SIM card. Inserting or removing SIM card with
external power supply is prohibited, otherwise the SIM
card may be damaged.
Installing/removing SIM card
The SIM card is usually stored in a card and you need to take it
out carefully before installing.
• Turn off the mobile phone; remove battery and external
power supply.
• Insert the SIM card into the slot or pull out the SIM card from
the slot.
Note: Please turn off the mobile phone and remove battery
before removing SIM card.
Switching on/off
Press and hold the Hang_Up key to switch on/off the mobile
phone.
If you switch on the mobile phone before inserting the SIM
card, it prompts you to insert the SIM card. The mobile phone
checks whether the SIM card is valid automatically after it is
inserted.
The following prompts appear on the screen in sequence when
the mobile phone is just switching on:
• Input phone password – If the password of the phone has
been set.
• Input PIN – If the password of the SIM card has been set.
• Searching – The mobile phone is searching for available
network.
The function of the double SIM card – For the sake of making
your usage convenient, this cellular phone takes a pair of SIM
cards functions. You have to insert a valid SIM card inside the
two SIM card slots before this function can be used. Turn on
your phone and then it will enter the function of dual SIM cards
automatically.
Connecting to network
• The mobile phone will search for network automatically after
the SIM card is decrypted successfully (display “Searching
for network” on the screen). The name of network operator
will appear in the standby state of the phone once connected.
Note: If there is prompt of “EMERGENCY” on the screen,
it means that you are out of the normal coverage area
(service area) of the network, but you can still make an
emergency call according to the signal intensity.
Making a phone call
When the operator symbol of the network appears on the
screen, you can make or answer calls. The symbol in the
top left corner of the screen shows the signal strength of the
network.
If the signal strength is low, try moving around with the phone
until the signal becomes stronger.
Making local telephone calls
Input the telephone number using the number keys, then press
the Dial key to start calling. If you need change a number,
please press Right soft key to delete the number(s). The
screen will show a moving picture when you are dialing the
number. You should then hear the connecting sound. If there is
a problem connecting you may need network support.
After your conversation is over please press the Hang_Up
key to end the call.
Area number Telephone number Dial key
Dialling a fixed telephone extension
Some fixed telephone extensions can’t dial directly. You
need to dial switchboard first, then dial extension number.
If you insert the letter “P”, the sign for pausing between the
switchboard number and the extension number when you
input telephone number, this machine will complete the full
number for you and connect to the extension automatically.
The method of inputting “P” is pressing the * key (the screen
will show the letter “P” at this time).
The area number Switchboard number P Extension
number The Dial key
An example for using the sign of the pause:
For example, if you have a voice box system accessed by
dialing 8880000, the mailbox number is 6666, the password is
8888, you can dial these number as follows:
8880000 P 6666 P 8888
The first part of this number is used for dialing to connect to the
voice-mail system.
After answering the call, it will send out 6666 to choose
mailbox.
Before the password 8888 is sent out, the second pause sign
will delay 5 seconds (the first P means waiting for connecting
successfully, the later P means postponing 5 seconds).
Making an international call
If you want to make an international call, you can press and
hold the * key until the screen appears the prefix sign “+”, for
international long-distance calls. Then enter the region prefix
number (for example, it is 00 in China). Then enter the national
area code and the phone number. National area codes for
example are, Germany 49, England 44, Sweden 46 etc.
As similar as to make a usual international call, you don’t enter
the first “0” of the STD code.
For example, if you want to dial the hot line for service from
other countries, you should enter:
+86 21 114
+The telephone number National code Dial key
Emergency call
If you are in a place that the network covers (this is shown
by the intensity of the network signal on the upper left of the
screen), you can make an emergency call. If your network
supplier doesn’t provide the service of roaming in that region,
the screen will show “limit urgent call (EMERGENCY)”, telling
you that you can only make an emergency call. If you are
in a place that the network covers, you can also make an
emergency call without a SIM card.
Answering the telephone
In the answer mode, if you have “Any key” switched On,
you can press any key to answer a call; otherwise you need
press the Dial key or the Left soft key to answer a call. If
you have earphones inserted, you can also use the button
of the earphone to answer the call. You can set the phone to
answer automatically when wearing earphones, this allows the
telephone answer the call 5 seconds after it begins to ring.
Function Menus
Using function menus
When the phone is on standby, press the Left soft key or the
OK key to access Main menu; in all menus and submenus,
you can enter or exit the menu by pressing the Left soft key or
the Right soft key.
Exit: Generally, you can press the Right soft key to return
to the previous menu; press the Hang_Up key to return to
standby.
Phonebook
You can use the function of the Phonebook to record
information for your contacts. The mobile phone can save 500
telephone numbers.
After accessing the Phonebook, go to Add new contact,
Option, you will then see the following submenus:
• Select: You can choose to store information to SIM1, to
SIM2 or to phone.
• Caller groups: Add new group; change each group by group
name, caller alert and caller ringtone.
Phonebook settings: This is divided into eight tiny parts,
including Preferred storage, Family numbers, My number,
Extra numbers, Memory status, Copy contacts, Move
contacts, Delete all contacts, Backup phonebooks and
Restore phonebooks.
•Accessing the Options when the cursor is at one of the
contacts saved in your phonebook, you can see these
submenus: View, Send text message, Send multimedia
message, Call, IP dial, Edit, Delete, Copy, Move, Send contact,
Add to Blacklist, Caller groups and Phonebook settings.
Messaging
Write message
The network service of text message allows you to send out
text messages to phones which can receive text messages.
Be sure you have established the centre number of service
before writing new messages (Please check “SMS settings”).
Go to the write mesage submenu and use the keypad to write
a normal message. While writing a message, if you press the
Left soft key the following Options are available:
• Send to: Choose this once your message is complete; you
can send the message by SIM1 or SIM2 according to your
own need.
• Input method: You can change the input method.
• Advanced:
• Insert number: Choose a number of a contact which is kept
in the Phonebook that you wish to send the message to, and
then press the Left soft key to insert it immediately.
• Insert name: Choose the name of a contact which is kept in
the Phonebook. Press the Up/Down key to choose the name
that you need and then press the Left soft key to insert it
immediately.
• Insert bookmark: Choose the record which is kept in the
telephone. Press the Up/Down key to choose the bookmark
that you need and then press the Left soft key to insert it
immediately.
• Save: Save the current message to Outbox.
Inbox
Stores all text messages you have received.
Outbox
Access Outbox to view the messages you have sent and
saved, or the messages you haven’t sent but saved.
MMS
• Write message
Press the Left soft key to get into the editting interface of
multimedia message, you can send to more than one contact,
Cc (copy and send this multimedia message to this person),
Bcc (send the current multimedia message to this person and
others do not know that the multimedia message has been
sent out to this person); input telephone number or E-mail
of contact you wish to send multimedia message to, each of
which can be one or many; you can also edit the subject of the
multimedia message.
You can input the content of the character directly, or insert all
kinds of targets into the multimedia message.
When the cursor is on the content in the multimedia message,
select Edit and press the Left soft key to enter the menu of the
following Options:
• Done: Select it to exit after finishing the content of your
MMS.
• Input method: Change the method for text editing.
• Add picture: Insert a picture on your phone in to the current
page.
• Edit picture*: Change the picture in the current page.
• Remove picture*: Delete the picture in the current page.
• Add audio: Inserting music on your phone in to the current
page.
• Edit audio*: Change music in the current page.
• Remove audio*: Delete music in the current page.
• Insert attachment: Insert attachment on your phone to the
current page.
• Edit attachment*: Change an existent attachment in the
current page.
• Delete attachment*: Delete the attachment in the current
page.
• Add slide before: Insert a new page before the current page
of the multimedia message and make the current page.
• Add slide after: Insert a new page behind the current page
of the multimedia message and make it the current page.
• Delete this page*: Delete the current page and make the
Ex-page page the current page; if the deleted page is the first
page, the second page will be the current page. • Ex- page*: Get into the preview of the ex- page and choose
Options to edit this page.
• Next page*: Get into the preview of the next page and
choose Options to edit this page.
• Add bookmark text: Add bookmark of websites to the
current MMS. • Preview: View the current multimedia message.
• Slide time: You can set up the slide time of the current page
(the unit is second).
After completing, you can choose Send only, Save and send,
Save to drafts, Send options or Exit (if you haven’t added a
contact to send to, there will be only two choices: Save to
Drafts and Exit).
Attention:
The options which are marked by “*” only appear when
relevant, such as “Delete this page” only appears when the
content of the current multimedia message is more than
one page. Each page can be include at most one song and
a picture. When the current page has a picture or an audio
file, “Add picture” is changed into “Edit picture” and “Remove
picture”. Audio and attachment options change in the same
way as the picture. There is a limit of one attachment per
message. The size of the multimedia message is measured in
KB (kilo-bytes) (the equivalent of a thousand words); the top of
message will show the current page number, the total number
of pages and the size of the multimedia message.
• Inbox: Stores multimedia messages you have received.
• Outbox: It is used to store multimedia message which have
sent out and saved.
• Drafts: It is used to Store the MMS which you don’t want to
send out immediately
after editing.
• MMS settings:
• Profiles: Choose the server.
• Common settings:
• Compose:
• Creation mode: Set up whether the editing mode of the
multimedia message is restricted.
• Picture resizing: Reducing the picture which is input in the
multimedia message to be the size that you need, you can
also turn this function off.
• Best page time: Turn the function of Best page time on/off.
• Auto signature: Turn on/off the function to add a signature
while sending out the multimedia message.
• Signature: Edit the signature which will be automaticlly
added after MMS when auto signature function is on.
• Send:
• Validity period: You can set up how long the multimedia
message can be stored in the multimedia message centre:
1 hour, 6 hours, 12 hours, 1day, 1 week or Maximum. If you
select Maximum, the length of time the multimedia message
can be stored in the phone is decided by the multimedia
message centre.
• Delivery report: You can choose On or Off. If On, the
system will send out confirmation information after the
multimedia message has been received.
• Read report: You can choose On or Off. If On, the system
will send out a confirmation information after multimedia
message has been read.
• Priority: If the network allows, you can choose the grade
of the priority of sending out the multimedia message as
Medium, High or Low.
• Slide time: Set interval time of previewing each page of the
multimedia message. The default value is 5 seconds.
• Delivery time: If the network allows, you can set up the time
of sending mode as Immediate, 1 hour later, 12 hours or 24
hours later.
• Retrieval: You can choose the mode of receiving the
multimedia message is Immediate, Rejected or Delay while
choosing the main network and the roam network; you can
choose Send, Never send or On to manage the function of
reading report.
• Filter: It can decide whether this phone can receive or refuse
an anonymous letter.
• Memory status: Shows the memory status of MMS.
Broadcast message
• Receive mode: Choose On to open the function of receiving
sub-district broadcast; choose Off to refusing the sub-district
broadcast.
• Read message: Access this menu to read the message of
your sub-district broadcast.
• Languages: Set the language of receiving the sub-district
broadcast.
• Channel settings: Set the channels of the sub-district
broadcast.
Note: The service of the sub-district broadcast and
voicemail are provided by the operator, please keep in
touch with the company.
SMS settings
• Profile setting: Set profile name, SMSC address, validity
period and the message type; activate the profile which you
choose.
• Voicemail server: The voicemail is received in the network,
so you have to dial the number of voicemail if you want to
listen to any messages. You can increase or edit the number
of voicemail, for your own convenience; you can make a
voice call to the number you have added in the voicemail.
• Common setting
• Delivery report: Enable or disable report. If report is
enabled, you can receive a report when the message is sent
successfully.
• Reply path: Set the replying path.
• Save sent message: After activating this function, the SMS
or the MMS which have been sent will save automatically.
• Memory status: Display the space used/empty of SIM card
and mobile phone.
• Preferred storage: Save messages in SIM or phone.
Call centre
Call history
You can access the SIM call history:
• Missed calls: Pressing the assurance key can look into the
list of missed calls.
• Dialled calls: Pressing the assurance key can look into the
list of dialled call.
• Received calls: Pressing the assurance key can look into
the list of received call.
• Delete call logs: There are four menus in deleting the
call history: Missed calls, Dialled calls, Received calls and
Delete all. Choose one or all lists you wish to delete.
• Call timers: Check the time of the last call, the total time of
dialled calls, the total time of received calls or reset all of
them.
• Call cost: This can help you to store the cost of your call
record.
• Last call cost: To check the last call cost.
• Total cost: To check the total cost.
• Reset cost: Input the PIN2 code and you can reset the cost
record and start a new one.
• Max cost: Enter it to read or revise the max cost, or to cancel
this function. You’re required to input the PIN2 code when
you revise or cancel the function.
• Price per unit: Enter it to read or revise the price per unit, or
to cancel this function. You’re required to input the PIN2 code
when you revise or cancel the function.
• Text msg. counter: Check the number for the Send
messages and the Received message; you can also reset the
counter to zero.
• GPRS counter:
• Last sent: Count the byte transmitted last time.
• Last received: Count the byte received last time.
• All sent: Count the total byte transmitted.
• All received: Count the total byte received.
• Reset counter: Start to count again.
Call Settings
• SIM call settings:
• Caller ID: Parts in the functions need network operator’s
support. It includes Set by network, Hide ID and Send ID.
• Call waiting: Open or close this function; choose query to
check the current state of it.
• Call divert: It includes five different options, including Divert
all voice calls, Divert if unreachable, Divert if no answer,
Divert if busy and Divert all data calls; or Cancel all diverts
means all will be deactivated.
• Call barring: Restrict the numbers which you can dial or
receive.
• Line switching: Choose line1 or line2.
• Advance settings:
• Blacklist: Turn on/off the blacklist function; edit the blacklist
numbers.
• Whitelist: Turn on/off the whitelist function; edit the blacklist
numbers.
• Auto redial: After opening this function, the phone will
dial the number again automatically every time when the
outgoing call fails or is rejected.
• IP dial: Three numbers of IP dial can be edited under this
function. You can open the IP number after at least one IP
number has already entered.
• Call time display: Display the total call time.
• Call time reminder: You can set the call time reminder
mode as Single or periodic; select Off to cancel this function.
Attention: Parts of the functions need network operator’s
support.
Organiser
Emergency setting
• Status: Switch on/off the SOS function.
• SOS number: There you can edit and save up to three SOS
number in your phone.
• Edit SOS SMS: Edit the content of the SOS message which
will be sent out automatically when the SOS function is
used.
After the SOS number and the SOS message have been
editted, press and hold the SOS key on the back of the phone,
and then the phone will dial the SOS number after sending out
an SOS message to the appointed numbers (the first number
will be called first).
Note: The function of SOS will work only after the SOS
function is activated, there needs to be at least one SOS
number and SOS message saved.
Family Numbers
• Status: Turn on/off the Speed dial function.
• Set number: Edit and save ten speed dial numbers which
correspond to the number keys 2-9, the * key and the # key.
After the speed dial status is On, press and hold one of the
ten speed dial number keys when the phone is on standby,
the phone will make a phone call to the corresponding phone
number which has been entered in the speed dial number list. Fun&Games
Play the games stored in the phone and set up the correlative
parameters of the games.
Services
• Internet service:
This mobile phone supports services based on Wireless
Application Protocol (WAP). You can access the services
supported by your network operator. You can get information
about news, weather and flights.
Note: GPRS service needs network support and it is
available only when you apply this service and locate in
GPRS network coverage.
• Homepage: Enters the web site which you have set in the
WAP directly.
• Bookmarks: Display existing web sites which you have
saved in bookmarks. Selecting the web address can connect
to this bookmark directly.
• Recent pages: Records the web addresses you have visited.
• Input address: Select this option and you can enter any
WAP or internet website.
• Service inbox: Save messages sent by network operator.
• Settings: Set options for internet surfing, including
Homepage, Select profiles, Browser options and Preferences.
File manager
Press the Left soft key to enter File manager. The default way
for storing is T-Flash card. After inserting the T-Flash, there are
two options you can choose: Phone and Memory card. Select
one of them and you can see the contents as follows:
• Total: The total capacity of Phone or Memory card.
• F
ree: The remainder capacity of Phone or Memory card.
Enter Phone or Memory card and then press the Left soft key
to access the submenus.
• Audio: The phone can play these formats of audio files: mp3
/ midi / amr / wav. The audio documents support to be use
as User profiles.
• Images: The phone can view these formats of images: BMP
/ GIF / JPG.
• Videos: The phone can play these formats of video files: AVI
/ 3GP / MP4.
Calculator
Your mobile phone provides a calculator function which
includes four basic calculating types.
Enter this function and a clculator will be shown on the screen.
Press the number keys to input the value.
Press the # key to input the decimal point (.).
Use the direction keys or the lateral two keys to select the
icons of the calculator.
Select corresponding icons to carry out a calculation: +, -, ×
and ÷.
Select the icon M+ and it will add the number to the data
which is stored in the memory.
Select the icon M- and it will subtract the number from the
data which is stored in the memory.
Select the icon MC and it will clear the memory.
Select the icon MR and you can retransmit the data in the
memory.
Press the Right soft key and you can clear the latest input digit
or result (if there is no input value, you will exit the calculator
mode); press the Left soft key to get the result.
Attention: Since the accuracy is limited, there will be
rounding errors, especially when the numbers can not be
divided completely.
Tasks
Press the Left soft key to enter the task list.
If you have not added any task, you can press the left soft key
to add a new task.
If there are some existing tasks in the task list, press the up
/ down key to select a task to get into the options: View, Add,
Edit, Delete, Delete overdue, Delete all, Send v Calendar and
Save as file.
Alarm
You can customise up to five alarm clocks in this mobile phone.
Select an alarm clock to customise.
Mutimedia
Camera
Your mobile phone provides the function of a camera. Access
Camera and please take photograph directly by pressing the
OK key.
In the camera mode, press the Left soft key to enter these
menus: Photos, Camera settings, Image settings, White
balance, Scene mode, Storage and Restore default.
Image viewer
Enter and select the picture you need, then press the Left
soft key to choose Options, you can see the submenus: View,
Browser style, Send, Rename, Delete, Sort by, Delete all files
and Storage.
Video recorder
Select [Video recorder] to activate the mode of recording
directly, and then press the OK key to start recording a video.
Access the following Options by pressing the Left soft key:
Camcorder settings, Storage and Restore default.
Video player
Enter and select the video you need, then press the Left soft
key to choose Options, you can see these submenus: Play,
Rename, Delete, Delete all files, Sort by and Storage.
In the playing mode, press the OK key to let the current
document play or pause; press the Up/Down key to change
the playing volume; press the * key to switch the playing mode
between full screen and non-full screen.
Audio player
Choose the Audio player to access MP3 broadcasting mode.
The screen of the music player shows the caption: List, Back.
Accessing list will show the name of the music that you have
downloaded. Select one song in the list, you can then access
the function of Play, Details, Add to ringtones, Refresh list and
settings, by choosing “options” which is under the detailed list.
If your detailed list is empty, you can only see Refresh list and
Settings.
►and II: Press the Up key to switch the music player on or off,
or to stop it for short time.
■: Press the Down key to stop broadcasting music.
I and ►I: Press the number key 2 or 3 to switch to the
previous song and the next song separately .
Volume: Press the lateral keys to change the volume for
playing.
►
Calendar
Enter submenu of Calendar and you will see dates.
Press the direction keys to select date and month; press Option
to access submenus: View, View all, Add event, Delete event,
Jump to date and Go to weekly/monthly view.
Sound recorder
Access the sound-recording file list directly: Select one of
the existing files and enter Options: Record, Play, Append,
Rename, Delete, Delete all files, Settings, Use as and Send.
Please select Record to start recording. If there is no file, there
will only be Record and Settings in Options.
FM radio
This mobile phone provides the function of FM radio, and you
need not input an earphone in the phone before using this
function.
In the FM radio mode, pressing the Up key can turn on/of the
function of searching automatically. After opening this function,
pressing the number key 2 or 3 will continue searching forward
or backward automatically, until a channel is found. When you
turn off the function of searching automatically, you can carry
on searching by yourself. Press the number key 2 or 3 will
increase or reduce 0.1 HZ.
Select the Down key to start or stop the FM radio playing;
press the lateral key to adjust the volume. In the radio mode,
select [options] to carry out the following operations:
• Channel list: In this menu, it will show a detailed list of all
channels that you have listened to and stored in your phone.
You can also play the existing channels directly. You can also
delete or edit an existing channel.
• Manual input: You can input the broadcast frequency by
hand which you want to hear, and then it will broadcast
automatically after you press the assurance key.
• Auto search: Choose this menu to search broadcast
channels automatically.
• Settings: Set the function of Background play or
Loudspeaker as On or Off.
Attention: The sound will be affected while listening
indoors or if the phone is covered. You can use the
following ways to improve sound: use close to a window,
change the position of headphones line or adjust the
channels by hand.
Settings
Dual SIM setting
You can select one of the following: Double SIM open, Only
SIM1 open, Only SIM2 open or Flight mode.
User profiles
The user can choose different user profiles and self-define
them. The mobile phone provides five kinds of user profiles:
General, Meeting, Outdoor, Indoor and Headset. You can
choose to activate one of them or set it personally.
• Activate: Press the Dial key to activate the mode you have
chosen.
• Customise: Enter this option self-define the modes.
Note:
• The Headset mode will open automatically while inserting
headphones.
• We advise you to set the User profiles as Meeting mode or
Indoor mode when you are in public place.
Phone settings
Accessing Phone settings, you can set the following menu
according to your own preferences:
• Time and date: Set the home city for time; set the current
time and date; set the display format of time and date; set
the Update with time zone function as On or Off.
• Language: Set the displaying language of mobile phone
menus.
• Pref. input method: Choose the original input method when
you begin to edit some content such as SMS, the name of
the contacts, the name of the files and so on.
• Display:
• Wallpaper: Select the wallpaper shown when phone is on
standby.
• Screen saver: Choose a screen saver picture for main
standby; set the status for it and set the waiting time.
• Show date and time: Enable or disable the function of
displaying current time when phone is ons standby.
• Schedule power on/off: Set the time when the mobile
phone will power on/off automaticlly.
• Dedicated key: Select the functions which can be entered
by pressing the Up/Down key when the phone is on standby.
• Misc. settings:
• LCD backlight: Set delay time of the LCD brightness.
Network settings
This menu has connection with the network suppliers, so
please get in touch with them when you use this function. If you
want to get into use a network which doesn’t have the roaming
protocol with the original network you have, the phone will
display the message that you can only make an emergency
call.
• Network selection:
• New search: Start to find the network again.
• Select network: Select the network which you prefer.
• Selection mode: Press the Dial key to choose Done or press
the Hang_Up key to exit the submenu.
• Preferences: Pre-store several networks you prefer.
Security settings
Use this function to set the security options to avoid your
phone or SIM card being used illegally if lost or stolen.
• SIM security settings:
• SIM lock: PIN code.
PIN code can prevent your SIM card from operating if your
phone is lost or stolen.
• If the PIN code is disabled, choose Enable and you can start
PIN code protection. The mobile phone will ask you to enter
PIN code the next time when you turn on the phone.
• If the PIN code is enabled, choose Disable and then you can
stop PIN code protection.
Note: If you enter an invalid PIN code three times
consecutively, the SIM card will be locked and you need
PUK code to unlock the SIM card. The PIN code and PUK
code may be provided together with SIM card. Please
contact your network operator if not.
The default PIN code is 1234. Please change it into your
own private PIN code as soon as possible.
• Fixed dial:
Is supported by your SIM card and you can select some
telephone numbers to dial. If this service is activated, you can
only dial the telephone numbers in the FDN list or numbers
that start with the same dialling code as those in the list.
Enter the submenu of fixed dialing:
• Mode: Enable or disable fixed dialing function (need to enter
PIN2 code).
• Fixed dial list: Enter the telephone numbers of fixed dialing.
Note: You need to enter PIN2 code to enable or disable
fixed dialing function. Please contact your network
operator to get PIN2 code. The numbers which are fixed
dialing numbers will carry on the fixed dialing function if
FDN function is enabled.
• Barred dial: It is opposite to fixed dialing and you can set to
disable dialing certain numbers.
• Change password: Change password, including PIN and
PIN2 password.
• Phone lock: The phone lock can prevent your mobile phone
from being used by someone else. You can set the phone
lock as On or Off and change the phone password.
Select Phone lock to enable protection and then you need to
enter the password when you switch on the phone; press the
Dial key to access Phone lock and input the password again to
disable phone lock.
Note: The default phone lock password is 1122. Please
change into your own private password as soon as
possible.
• Auto keypad lock: Close this function or open it by setting
the waiting time of keypad lock. After setting, the keypad
will be locked automatically if the mobile phone hasn’t been
used in specified time.
Note: Certain functions need network support.
• Change password: Change password of the phone lock.
Connectivity
• Data account:
Select Options to choose an account number and edit:
• Account name: Show the name of account. Choose Edit and
you can modify.
• APN: Edit the connect point as cmwap or cmnet.
• User name: Edit the user name of the service.
• Password: Edit the service password for this user.
• Auth. type: Select the encrypting mode of authentication.
• Primary DNS: The primary IP address.
• Secondary DNS: The second IP address.
Restore factory settings
The default password of Restore factory settings is 1122.
Input Methods
This mobile phone supports these input methods: Smart ABC/
abc, ABC/abc, Numeric, Insert symbol and so on.
Key definitions
The general definition of keypad is as follows (please refer to
“Text input” for the keypad definitions specific input method):
• The Left soft key: Press it to confirm.
• The Right soft key: Press it to clear a character.
• The * key: Input symbols.
• The # key: Switch input methods.
• Number keys (0-9): Input the letters on each key.
Text input
English and number input methods
The specific definition of keypad in English and number input
methods:
Keys
Characters or functions
Number key 1
Input symbols
Number key 2
ABCabc2
Number key 3
DEFdef3
Number key 4
GHIghi4
Number key 5
JKLjkl5
Number key 6
MNOmno6
Number key 7
PQRSpqrs7
Number key 8
TUVtuv8
Number key 9
WXYZwxyz9
Number key 0
0 and space
The * key Input symbols.
The # key Switch input methods.
Left soft keyConfirm
Right soft key
Clear
To input English letters:
• Each key allows you to input more than one character. Press
the key repeatedly and quickly until the needed character
appears. Input next character when the cursor moves.
• Press the # key to change an input method.
• Press the number key “0” once to input one space in English
input method.
• Press the Right soft key to clear mistakes.
To input numbers:
• Press the number keys repeatedly and quickly until the
corresponding number appears when the current input
method is ABC/abc.
• Change the input method to Numeric and press [0]-[9] to
input corresponding numbers.
Smart ABC/abc
With Smart English method, you can input uppercase and
lowercase English letters. It has a predictive function, and
Problem
Bad reception
Reason
Solution
Switch off your phone temporarily if you are in
an area with bad reception
Hang up and redial, the line may be replaced
with a better one
Ask the network operator for service area map
Using the mobile phone in bad reception area, for
example, near tall buildings or in basement, the
Try to avoid
radio waves can’t reach these areas effectively.
Using your phone during busy network times.
Try to avoid
The distance from a network station.
Due to regional problems because of a
disconnection or bad connection of the network
The standby time is related to the system
settings of the network
Change a new battery
Some phone lines are poor in some areas
Need to change battery
Please move to area with stronger signals or
switch off the mobile phone temporarily
Move to a place with strong signal and try again
Please contact your network operator
Ask network operator for service area
Echo or noise
The standby
time is shorter
If the phone can not receive a signal, it will
transmit continuously to search for base station,
this will consume a lot of battery and shorten the
standby time
Wipe metal contacts of SIM card with clean cloth
SIM card is damaged
SIM card
appears to have The SIM card hasn‘t been installed properly
an error
There is dirt on the metal surface of the SIM card
Check the power of your battery or charge it
Beyond GSM service area
Change the battery or charger
Make sure the SIM card is installed properly
PIN has an error An invalid PIN code has been input three times
Weak signal
Battery or charger is damaged
Change it in the normal charging environment
SIM card is invalid
Can’t switch on Battery is depleted
Can not set
Your network operator doesn’t provide these
certain functions services or you haven’t applied
Can’t connect
to network
Can’t charge
Check whether the plug is connected properly
Troubleshooting
Refer to the table opposite to eliminate faults.
Charging in an environment with extreme
temperatures
Using T-flash card
T-flash card is configured as the default memory device of the
mobile phone before delivery. There is no need to change any
settings.
Use T-flash card as the memory device of mobile phone:
when you insert the T-flash card for the first time, you need to
set the memory card as the default storage device of Music
player, Video player and Sound recording.
Used as U-Disk: After conneting with the computer by the USB
line, you may carry out the function of copying data or files
between the T-Flash and the computer.
Bad contact
when you press a key, it provides predictive words, saving a lot
of time. The keypad distribution of Smart English is the same
as English input method. See below and ooposite page for
general instructions for Smart English:
• Every key is used to input corresponding characters and the
characters will change according to previous letter to make
up word.
• Press the Up/Down key to switch character combinations.
• Press the Left soft key to select word or character. Press the
0 key to input the word and insert a space after it.
• To change an input method, press # Key.
About T-flash Card
This mobile phone supports T-flash card to extend the memory
space. The instructions are
as follows:
Installing and removing T-flash card
• Switch off the phone and take out the battery.
• Insert or remove the T-Flash to the slot which has the sign
T-Flash.

Big Button Flip Easyphone

Transcription

Similar documents

i6 user manual

George Middle School / Homepage

Sim Card leaflet AW Fin.indd

http://kucrl.org/sim - Training and Technical Assistance Center (T/TAC)

Activation Guide

LIFEPAK 500 Maintenance Checklist

Light Options – There are 3 dual LED strips in the

How to adjust DeVlieg@ Micro-AdjustrM Standard Boring Bars

Quick Start Guide