FRE6-260001 A7

CROYDON
HI
OFF
LOW
HI
OFF
LOW
HI
OFF
LOW
FRE6
FRE6-260001 A7
CROYDON
CHICKEN ROTISSERIE 6 SKEWERS
72
28
29
30
55
71
75
35
68
42
4
32
1
82
16
31
5
42
56
76
70
34
66
35
26
36
38 39
14
63
2
35
25
19
68
42
6
41
73
64
43
77
68
3
69
37
40
65
38
80
79
78
24
44
9
8
62
10
59
7
58
21
20
23
19
22
18
17
16
15
13
14
53
45
48
46
61
67
33
27
81
60 57
74
16
47
32
11
49
50
12
54
51
52
CROYDON
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
Code
94.609-3
94.610-3
94.620-3
94.070-3
94.074-3
94.073-3
94.612-3
94.613-3
94.624-3
94.035-3
94.628-3
94.069-3
94.055-3
601
94.088-3
597
345
94.062-3
531
94.058-3
593
606
94.066-3
94.630-3
94.004-3
94.636-3
94.052-3
94.044-3
94.007-3
94.005-3
94.615-3
381
94.637-3
94.060-3
355 C
94.418-3
358 I
94.034-3
94.028-3
94.027-3
94.067-3
566
94.002-3
94.047-3
94.032-3
94.031-3
94.014-3
332
94.019-3
94.020-3
94.199-3
37.022-3
94.655-3
94.190-3
2.013-3
2.009-B
94.057-3
94.003-3
94.187-3
2.009-3
94.617-3
94.623-3
642
258
94.059-3
94.033-3
94.627-3
355 G
94.629-3
94.633-3
94.029-3
2.085-3
94.036-3
94.654-3
94.611-3
1.343-3
94.117-3
2.007-3
1.998-3
3.021-3
329
330
CHICKEN ROTISSERIE 6 SKEWERS
Description
Upper Back Cover
Lower Back Cover
Burner’s Panel
Heater’s Support
Heater
Cover Protection
External Left Cover
Thermal Insulator
Internal Left Cover
Skewer’s Support
Lateral Frame
Skewer’s Tool
Motor
Nut(1/4”)
Rubber Washer
Washer
Screw (1/4”)
Endless Screw
Allen Screw (1/4”)
Tray
Washer (3/8")
Nut (3/8")
Wheel
Structure
Frontal Forehead
Internal Right Cover
Internal Top Cover
Top Cover
Thermal Insulator
Top Right Cover
Thermal Insulator
Screw (1/4")
External Right Cover
Door Handle
Screw
Door Guide
Screw (1/4")
Limit Ring
Metal Ring Support
Axis Guide
Door Spring
Screw
Mechanism Protection Box
Motor Cover
Drain Valve
Skewer Gear
Skewer with Handle
Screw (1/4")
Double Hook
Single Hook
Glass Support
Glass Door Handle
Tempered Glass with Hole
Glass Protection Rubber
Pilot Light
Knob
Thermostat Support
Front Lower Cover
Door Rail
Thermostat
Gear Protection
Wiring
Washer (1/4”)
On/Off Switch
Celleron Gear
Endless Screw
Door
Screw
Axis
Skewers Support
Door Hinge
Wire Connector
Eletric Connector
Tempered Glass
Lighter Protection
Plate
Heating Element Retainer
Rubber Protection
Cord Connection
Finishing Rubber
Thermostat Screw
Screw Special
Wiring Diagram
THERMOSTAT
HEATER
MOTOR
SWITCH
1 2 3 4 5 6 7 8 9
220V
4
6
4
7
6
7
4
7
5
9
8
3
8
8
1 2
1 2
R
1
VOLTAGE
6
5
5
3
S
3
T
3
R
1 2 S
N
3 Y
T
HEATER
10
30
30Y
220
220
220
220
Technical Data
FRE6-260001 A7
Voltage (V)
Amperage (A)
Power (kW)
Weight (kg/lbs)
Dimension W x H x D (cm/in)
Capacity
220
39,1
8,6
79 / 174
114/44.9 x 161/63.4 x 46/18.2
30 chicken (6 skewers)
INSTRUCTION MANUAL
- Please read these instructions carefully before operating this appliance.
- This appliance is designed to operate on alternative current (A.C.) Only
- DO NOT CONNECT TO DIRECT CURRENT (D.C.).
- Care should be taken when operating this appliance, as HOT SURFACES may cause burns.
- The installation area must be well ventilated to eliminate gases resulting of process.
- It’s recommended to have at least 10 “ of free space around the equipment.
- For safety reasons DO NOT install the equipment next of combustible materials.
- When not in use for long period unplug the appliance.
- As metallic parts are good conductors of heat, let it cool before handling.
INSTALLATION
- Unpack the equipment and remove the accessories from the internal part.
- Position the equipment in the point of installation and adjust the feet to regulate the closing of the doors.
- Make the electric installation according to your local safety standards.
- Check the equipment requirements and your power supply conditions and connect it.
- Always connect the green head screw (
) to ground.
OPERATION
- Check if all thermostats’ knobs are in "off" position.
- Place the skewers on the equipment.
- Turn on the Motor switch located at the left side of the frontal panel (inferior button)
- Turn each thermostat’s knob to the desired temperature.
- Wait about 1 hour, with skewers rotating, for the chickens to be finished.
- You can adjust each thermostat independently to get the results that you wish.
- It’s recommended to use a layer of water in the tray (the enough to cover the bottom) to avoid the splash of
grease and to facilitate the cleaning operation.
CLEANING PROCEDURE
- Remove the skewers and clean it with soaped water after the heavy fat was removed.
- Avoid to wet the electric connections of the heaters.
- Clean the cabinet with a cloth humidified with soaped water.
- Do not use any kind of abrasive material for cleaning.
- Do not use water jet on the equipment.
- Connect a tube or place a recipient under the drain valve.
- Remove the cap of the drain located in the inferior part for the discharge of every residue of water and
fat.
MAINTENANCE
- A little periodical maintenance is needed to get a best performance of the equipment:
- Always maintain your equipment clean and in perfect operation conditions, those providences will help
your equipment to last longer.
- To guarantee a good performance, we recommended an annual revision of the equipment.
CROYDON
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
e-mail: [email protected] - www.croydon.com.br
The pictures/drawings are illustrations. All data can be changed without notification.
CHICKEN ROTISSERIE 6 SKEWERS - MODEL: FRE6-260001 A7