Triax Distribution Amplifiers [2005] 1.indd

Transcription

Triax Distribution Amplifiers
for community networks
Flexibility from trunk line to subscriber
in current to future networks
1
L arge, medium and small
TRIAX Amplifiers
for SMATV and CATV
Triax range of amplifiers covers all
levels in the community network
- from trunk line, to distribution lines
and to individual problem solving at
the subscriber end.
Operational reliability is a must and
is included in almost any amplifier
offered today by leading suppliers.
Triax offers more in terms of
performance, for example extremely
high output level and low noise figures
making the amplifiers well suited for
networks with a high channel density.
But, first of all, our network amplifiers
are designed to simplify, i.e. to save
time and money for both installers and
network operators.
• Simplifying tomorrow:
Subscriber needs change as new
opportunities emerge.
In all our network amplifiers, the
configuration can be changed in
seconds by simple adjustments
of inexpensive plug-in modules.
An active or passive return path
to handle interactive services can
easily be established and many
of the amplifiers are well suited as
stepping-stones for
future expansions
of the network.
• C4 Superbroadband
Distribution Amplifiers
making SAT-IF distribution (up
to 2400 MHz) a viable possibility
even in large distribution networks
and for example to increase the
• Simplifying today:
Even in large and complex networks
only a relatively small number of
different, but flexible Triax amplifiers
and plug-in modules are needed.
All the amplifiers are easily
configurable on site and include
features to facilitate both testing
and adjusting the system. Onestop-shopping furthermore ensures
a coherent system and easy access
to efficient technical support.
From trunk line
to subscriber
To cover any amplification
need, Triax offers
variety of TVprograms offered in an existing
cable network.
• C3 Trunk and
with high output levels and based
on GaAs-FET technology ensuring
extremely low distortion figures
(CTB and CSO), low current
consumption and low noise figures
even at high frequencies.
2
C3 and C4
plug-in modules
• HFA
Let us help with answers
or a complete system
proposal
available at different gain levels
with excellent performance figures
and with Triax Automatic Link
Pass (ALP) technology
establishing the forward signal
automatically and without any
plug-in modules.
Giving precise and understandable
answers is probably the most
important way of keeping it simple.
Triax support is only a phone call
away, and we will assist you with
useful answers.
Furthermore we offer you complete
planning and documentation of
community networks.
Quality content
in quality housing
• IFA
with 1 or 2 outputs, 20 dB or
30 dB gain and all the features and
flexibility making them well suited
for low-cost installation at the
subscriber end of the network.
All Triax network amplifiers are
effectively shielded and protected by
quality housing fulfilling all the relevant
and acknowledged international and
national standards.
C3, C4 and HFA amplifiers are in
aluminium die-cast housing ensuring
both mechanical protection (IP66/IP65
requirements) and a high shielding
factor.
Quality housing with easy access to
connections, adjustment functions,
test points and plug-in slots facilitate
the installation, and this especially
applies to Triax IFA amplifiers with
their “click-on” mounting brackets and
easy access to both connections and
adjustment controls.
Based on
computer
software,
we can
provide
you with
specifications of
the right
solution,
including
drawings,
performance
calculations
and a part
list of all the
equipment
needed.
All you have
to do is to
specify
network
requirement, using the
checklist on
www.triax.com and specify demands
by e-mail from the website.
One-stopshopping
TRIA
X
Othe
r
Ch
eck
C/N in signals,
list,
cont
trans
proj
ition
.
Signa
ect
point
l varia
:
tio
Retur
n path n +/- dB in
frequ
trans
ition
ency
point
range
Conn
*:
:
ectio
Numb
ns
er of
subs
Numb
cribe
er
r conn
Distan of outlets
per su ections:
ce fro
bscri
m tra
Floor
Cust
ber:
nsitio
Chec
distan
omer
n point
ce:
Bran
k lis
Date:
inform
to mo
ch co
t, pr
nnec
st rem
ation
ojec
Custo
tion ter
ote ou
t
mer:
mina
tlet:
Instal
Addre
ted:
ss:
lation
loft:
Draw
Tel.:
area
ing of
base
dimen
Loca
E-ma
ment:
tion of
siona
il:
l
ac
he
Loca
enclo
Conta
curac
aden
tion of
sure:
d on
y of ins
ct pe
drawin
mast
rson:
Distan
Instal
tal
lat
other
on
g:
ion are
lation
ce of
drawin
place
anten
start
Loca
a with
Do yo
g:
s:
Fax:
time:
tion of
nas/d
routin
ish
desc u want an
ampli
gs/ca
Loca
riptio
fier en es to head
tion of
ble tra
n of theestimate
closu
en
ce:
su
Ca
Brief
of
d:
bs
ble len
re*:
the pri
projec
cribe
gene
r
gths
ce of
t/spe
ral de
Colou
stated enclosure*
cifica
a detai
scrip
r
tion)
of ca
:
tion of
may
led pro
binets
Regis
vary
the pro
ject,
max
tratio
and en
or a qu
ject,
%:
ns
closu
/Con
new
otatio
struc
res:
netw
n (a qu
tiona
ork or
Po
werota
l restric
renov
sutiopp
n req
tions
ation
22
Ante
ly uires a
Gree
of loc
of ex 0V*:
n:
nnas
ation
comp
isting
Lin
How
of ma
lete
e sune
/ Dish
Grey
ma
pptw
Howe
st an
ly*ork
:
: ::
Are av
d dis
ver, ma
Which ny SAT po es
h:
ailab
sition
x me
SAT
le 22
ters:
s:
posit
Which
0V co
ion
yes:
polar
s:
nnec
Instal
ities*:
tions
Signa
lation
indica
l stren
no:
Is
ted on
the he
enviro
gth fro
How
drawin
ma
m
nmen
Ambie adend to
g*:
Which ny terrestria LNB*:
be
t
nt
of he
wall or
tempe
chan
l:
aden
rature
rack
ne
Signa
yes:
d
moun
range
l stren ls / transmi
Head
ted:
at he
gth*:
en
tters:
FM /
no:
aden
any tim d equip
DA
d:
me
e rea
Signa B:
ches nt should
l stren
alw
35ºC
gth*:
or mo ays be
Tech
place
re
nical
d in an
Head
Proje
requ
end
cti
airco
How
nditio
CENE ng will alw iremen
ma
ned en
ts
LEC
EN 50 ays be in
viron
Numb ny channe
ment,
ac
083.
er
ls:
If oth cordanc
if the
Numb of Mono/St
e
er or
ambie
er
ere
highe with the
nt tem
Numb of DVB-S/D o:
r requir current
perat
er
mi
VB-T
emen
ure at
Numb of DVB-S
ts are nimum req
for Pa
All po
er
for QA
l:
dema
ints of
M:
nded uirements
Numb of Free to
Point
, pleas
s ma this form
of
er
Air/C
rked
I an
e sta antenna
Which of DVB-S
* may should be
te wh
syste
for FM d encodin
progra
ich:
be lef
filled
ms sta
g:
:
Info ch
ms:
in,
t out.
ted in
anne
In tha if possibl
l:
Surve
t case
e,
illanc
minim if not the
e came
TRIAX
Retur
es
um va
A/S
n path:
ra:
lues sential req
will for
Optio
uir
ns for
m the ements
mu
progra
basis
yes:
Bjørnk
yes:
of the st be agree
m pa
8783 ærvej 3
ckag
subs
Othe
no:
es:
Denm Hornsyld
eque d on.
no:
r
ark
nt pro
yes:
Signa signals
yes:
jectin
l from
g.
Phone
existing
Numb
no:
no:
er of
Telefa : +45 76
CATV
82
chan
x:
Signa
22 00
:
A/S reg +45 75
nels
l stren
68
. nr.
46.842 72 88
gth low and frequ
CTB/I
Ba
en
MA in
/high
nk:
cy ran
frequ
trans
e-mail: Nordea
ge:
ency
ition
www.t triax@tria
:
po
int*:
riax.dk
TRIAX
x.dk
TRIA
X
• ACB and ATB
Amplifier Series
with 2 inputs and 1 output, active
or passive in the frequency range
4-862 MHz and active in the
frequency range 950-2150 MHz,
overall a well suited amplifier
for low-cost installation in minor
networks.
A/S
Bjørnk
8783 ærvej 3
Denm Hornsyld
ark
Phone
Telefa : +45 76
A/S regx: +45 75 82 22 00
68
. nr.
46.842 72 88
3
Bank:
e-mail: Nordea
www.t triax@tria
riax.dk
x.dk
M aximum output,
Maximum flexibility
C3 Trunk Line and
Triax C3 series is a complete
amplifier system for achieving trunk
line output levels combined with all
the options and flexibility needed for
optimizing a distribution network in
terms of performance and minimum
investment.
• Flexibility:
A wide range of both built-in options
and plug-in modules enables the
installer to adapt the amplifier
to almost any requested system
design, including easy access to
later re-configuration against new
requirements
C3 Trunk Line Amplifiers
C3 Distribution Amplifiers
Linearity is a key requirement to trunk
line amplifiers and with flatness
figures > +/- 0.5 dB, the C3 Trunk Line
Amplifiers fully meet this requirement.
Other performance data are also
outstanding and in addition, the C3
Trunk Line Amplifiers feature for
example:
The C3 Distribution amplifiers have
switchable main amplification
(28 dB / 36 dB) and are especially
suitable as medium and large
distribution amplifiers.
Features include
- Interstage plug-in socket for fitting
of equalizer or attenuator. The
plug-ins have no negative effect
on maximum output level or the
amplifiers’ noise figures
• Interstage plug-in socket for fitting
of equalizer or attenuator
• Bi-directional test socket for
measuring the input signal without
interrupting operation or opening
the amplifier
• Performance:
Using GaAs-FET technology C3
amplifiers combine high output
levels with extremely low
distorsion figures (CTB and CSO),
low current consumption and
low noise figures even at high
frequencies. Reduced distorsion
at high frequencies allows
efficient adjustment of output
levels to compensate for higher
attenuation
• Prepared for the future:
Interactive services are fully
supported by C3 amplifiers and
the return path is easily configured
(frequency range, amplification,
etc.) with flexible plug-in modules.
Other future options include
expanding the distribution system
by activating a second amplifier
output with only a minimum loss in
output level.
As the technical data clearly shows, C3
amplifiers are products of high quality.
When you add an economic dimension
and relate quality and flexibility to price,
C3 are first class.
C3 Distribution
Amplifier
C3 Trunk Line
Amplifier
• Test sockets
at input and output
allowing measurements
without interrupting operation
• A second output, that can be
configured as a tap line (with
minimum attenuation), a distribution
line or as feed-in of remote
fed power
• Transit current separately
configurable for all inputs and
outputs via fuses
• All models available for mains
supply or for line powering with up
to 7 A power pass
• Efficient surge and transient
protection.
4
• A second output, that can be
configured as an operating or as a
test output
• Transit current separately
configurable for input and output
• All models available for mains
supply or line powering.
With their efficiency to suppress
interference, the amplifiers are
especially suited for networks with a
high channel density.
8
7
6
5
5
10
4
11
9
13
12
2
14
14
3
1
C3 Trunk Line Amplifier
Quick on-site configuration
with plug-ins
C3 Trunk Line Amplifier
Efficiency
flatness figures +/- 0.5 dB and
with a maximum output level of
119 to 126 dBµV
Our C3 series includes plug-in
modules for
1
2
3
4
5
6
7
8
9
10
11
12
13
14
• establishing an active or passive
return path
• equalization in both the forward and
the return path
• variable attenuation
• configuration of a second
output with taps or a splitter
• establishing an external
test socket.
The modules are fully
protected and are
easily inserted in the
correct position.
Signal input
Splitter or tap module
Line out
Test socket
Return path filter
Equalizer
Attenuator
Interstage plug-in socket
Test socket
Active/passive return path
Return-path equalizer
Remote feeding on/off
Splitter or tap module
Signal-/test output
C3 Distribution Amplifier
with a maximum output level of
122 to 126 dBµV
7
6
5
4
9
3
3
10
2
1
8
11
11
C3 Distribution Amplifier
5
1
2
3
4
5
6
7
8
9
10
11
Signal input
Test socket
Return path filter
Attenuator
Equalizer
Amplification switch
Variable output configuration
Selection of power feeding
Signal output
TRIAX
Check list, project
Customer information
E xtend the possibilities in
SAT-IF distribution
C4 Superbroadband
Date:
Customer:
Address:
Tel.:
Fax:
E-mail:
Contact person:
Installation start time:
Do you want an estimate of the price of a detailed project, or a quotation (a quotation requires a complete
description of the project/specification)
Brief general description of the project, new network or renovation of existing network::
A distribution network based on
SAT-IF distribution is a direct and
uncomplicated single cable solution.
Antennas / Dishes
TheSAT
network
How many
positions: can be a satellite only
Whichsolution,
SAT positions:but SAT-IF distribution can
Which polarities*:
also be used to widen the variety of
Signal strength from LNB*:
How many
terrestrial: offered in an existing cable
programs
Which channels / transmitters:
network
or a terrestrial system. With
Signal strength*:
C4 amplifiers SAT-IF distribution
FM / DAB:
Signalbecomes
strength*:
a practical and economic
possibility
even in large distribution
Headend
How many
channels:including several buildings or
systems
Number of Mono/Stereo:
community estates.
Number of DVB-S/DVB-T for Pal:
Number of DVB-S for QAM:
Number of Free to Air/CI and encoding:
Number of DVB-S for FM:
Which programs:
Info channel:
Surveillance camera:
yes:
Return path:
Options for program packages:
yes:
Excellent performance
even in the high yes:
no:
frequency range yes:
A multitude of
possibilities for
configuration
To achieve a practical system design
and ensure every subscriber a reliable
signal, C4 amplifiers can be adapted
and configured in all the relevant
ways:
• Interactive services can easily be
supported by inserting an active or
passive plug-in module
• Input signals from an existing
distribution system can have a
separate feed-in cable or inputs can
be combined in one cable
• Amplifiers are available with
switchable as well as fixed
amplification
no:
no:
no:
The
superbroadband
Other
signals
amplifiers of
the C4 series amplify a frequency
range up to 2400 MHz.
Signal from existing CATV:
Number of channels and frequency range:
Signal strength low/high frequency:
CTB/IMA in transition point*:
With GaAs-FET technology
Phone: +45 76 82 22 00
Bjørnkærvej 3
Telefax: +45 75 68 72 88
8783combine
Hornsyld
C4 amplifiers
high
A/S reg. nr. 46.842
Denmark
output levels with extremely
low distorsion figures (CTB and
CSO), low current consumption
and low noise figures even at high
frequencies.
TRIAX A/S
Bank: Nordea
e-mail: [email protected]
www.triax.dk
The amplifiers are equipped with two
separate amplifier lines for the range
up to 862 MHz and for the range from
950 to 2400 MHz.
The maximum output level ranges
from 120 to 124 dBµV.
• An equalizer is either built-in or both
a fixed and a variable equalizer can
be inserted as plug-in modules
• A variable attenuator can be
inserted as plug-in module
• Amplifiers are available for mains
power as well as line powering.
6
C4 Superbroadband
Distribution Amplifier
5
with a maximum output level
of 120 to 124 dBµV
6
4
8
7
1
2
3
4
5
6
7
8
9
10
4
9
3
1
2
10
Quick on-site
configuration with
plug-ins
Triax SCT Satellite IF/IF
converter is value for
money
Plug-in modules for C4 are identical
with the plug-in modules used for
C3 Trunk and Distribution Amplifiers
As head-end in the SAT-IF distribution
system, Triax supplies the SCT
Satellite IF/IF Converter that converts
every required SAT-IF channel from
its original frequency to an optimized
frequency within the output range of
950 to 2150 MHz.
• establishing an active or
passive return path
• equalization in both the
forward and the return
path
• variable attenuation
• configuration of a
second output with
taps or a splitter
• establishing an
external test socket.
The modules are fully
protected and are easily
inserted in the correct
position.
Input 1
SAT input
SAT plug module
Return path filter
Return path equalizer
Return path equalizer
Selection of power feeding
Output
Opportunity
The SCT converter handles both
digital and analogue satellite signals.
It is available with 6 or 12 input
channels, and two units can easily
be built together and handle up to
36 channels. Programming on site
is easy and the unit furthermore has
a range of valuable features, and a
competitive price.
TRIA
X
Othe
r
C/N in signals,
cont
trans
ition
.
Signa
po
Chec
l varia
int:
tio
n path n +/- dB in
frequ
trans
ition
ency
point
range
*:
:
Retur
TRIA
X
k lis
t,
proj
ect
Conn
ec
tions
Numb
er
Numb of subscri
ber co
er
nn
Distan of outlets
per su ections:
ce fro
bscri
m tra
Floor
Cust
ber:
nsitio
Chec
distan
omer
n point
ce:
Bran
k lis
Date:
inform
to mo
ch co
t,
proj
nnec
st rem
ation
Custo
tion ter
ect
ote ou
mer:
mina
tlet:
Instal
Addre
ted:
ss:
lation
loft:
Draw
Tel.:
ar
ing of
ea
base
dimen
Loca
E-ma
ment:
tion of
siona
il:
l accu
head
Loca
enclo
Conta
racy
end on
tion of
sure:
ct pe
of ins
drawin
mast
rson:
Distan
Instal
tal
lation
other
on dra
g:
lation
ce of
place
area
wing:
anten
start
Loca
Do yo
with rou
s:
Fax:
time:
tion of
nas/d
tings
ish
desc u want an
ampli
Loca
/cable
riptio
fier en es to head
estim
tion of
n
trace
ate
of
clo
en
subs
the pro
Cable
Brief
sure*
of
d:
:
cribe
gene
:
length
ject/s the price
r enclo
ral de
pecif
Co
s
of
sta
a
su
lou
scrip
icatio
detai
ted ma
re*:
r of ca
tion of
led pro
n)
y vary
binets
Regis
the pro
ject,
ma
tra
an
or
tio
d
x %:
ject,
enclo
ns/Con
a quota
new
sures
struc
tion (a
netw
:
tiona
ork or
Powe
quota
l restric
renov
r sutiopp
n req
tions
ation
22
Ante
ly uires a
Gree
of loc
of ex 0V*:
n:
nnas
ation
comp
isting
Lin
How
of ma
lete
e sune
/ Dish
Grey
pptw
ma
Howe
st an
ly*ork
:
: ::
Are av
d dis
ver, ma
Which ny SAT po es
h:
ailab
sition
x me
SAT
le 22
ters:
s:
posit
Which
0V
ions:
conn
yes:
polar
Instal
ectio
ities*:
Signa
ns ind
la
tio
l stren
no:
icated
Is the
n envi
gth fro
How
on dra
head
ronm
many
m LN
end to
win
Am
en
B*
ter
g*:
bie
Which
:
restria
be wa
t
nt tem
chan
ll or rac of head
l:
perat
nels
Signa
en
ure
ye
k
d
mo
/
s:
range
trans
l stren
Head
unted
mitte
at he
gth*:
en
:
FM /
rs:
no:
aden
any tim d equip
DA
d:
me
e rea
Signa B:
ches nt should
l stren
alw
35ºC
gth*:
or mo ays be
Tech
place
re
nical
d in an
Head
Proje
requ
end
cti
airco
How
nditio
CENE ng will alw iremen
many
ned en
ts
LEC
ays be
ch
EN
viron
Numb
anne
in
5008
ment,
er
ls:
3. If oth accorda
if the
nce
Numb of Mono/St
er or
ambie
er
ere
highe with the
nt tem
Numb of DVB-S/D o:
r requir current
perat
er
mi
VB-T
emen
ure at
Numb of DVB-S
ts are nimum req
for Pa
All po
er
for QA
l:
dema
ints of
M:
nded uirements
Numb of Free to
Point
, pleas
s ma this form
of
er
Air/C
rked
I and
e sta antenna
shou
Which of DVB-S
*
te
ld
en
ma
for FM
which systems
be
codin
progra
y be
:
g:
:
left ou filled in,
Info ch
ms:
stated
t. In tha if poss
anne
in
l:
Surve
t case ible, if no
illanc
minim
t
e came
TRIAX
Retur
um va the essenti
A/S
n path:
ra:
lues
will for al requirem
Optio
ns for
m the
en
progra
basis ts must
yes:
Bjørnk
yes:
be ag
of the
m pa
8783 ærvej 3
ree
ck
su
Ho
ag
d
Othe
bseq
no:
es:
Denm rnsyld
no:
uent on.
r
ark
projec
yes:
Signa signals
yes:
ting.
l from
Phone
existing
Numb
no:
no:
er of
Telefa : +45 76
CATV
chan
Signa
:
A/S regx: +45 75 82 22 00
nels
l stren
68
. nr.
46.842 72 88
gth low and frequ
CTB/I
Bank:
ency
MA in
/high
range
frequ
trans
e-mail: Nordea
:
ency
ition
tria
www.t
x@tria
:
point
riax
TR
x.d
*:
IAX A/S
.dk
Bjørnk
8783 ærvej 3
Denm Hornsyld
ark
Phone
Telefa : +45 76
A/S regx: +45 75 82 22 00
68
. nr.
46.842 72 88
7
Bank:
e-mail: Nordea
www.t triax@tria
riax.dk
x.dk
k
P owerful, reliable and
easy to install
HFA Distribution Amplifiers
With the HFA series of broadband
distribution amplifiers, both the
installer and the network operator
obtain all the benefits of a quality
product: Reliability and a long lifetime,
quick installation, effective shielding
and the option to use the network for
all conceivable interactive services.
The high performance amplifiers are
available in versions with different
gain levels (22 dB, 30 dB and 40 dB).
They all have adjustable gain, variable
tilt (0-18 dB) and are available for both
line and mains powering.
If you have chosen a return path
range of 5-30 MHz and want to
increase it to 5-55 MHz or 5-65 MHz
you just exchange the two Diplex
plug-in modules. The amplifier is the
same and needs not to be replaced.
High performance and
effective shielding
Few types cover it all
HFA amplifiers are available in
6 versions:
• 22 dB, mains or line powered
The amplifiers use push-pull
technology, which ensures low
distortion and a high output voltage.
Input and outputs are efficiently
transient protected up to 4 kV.
No plug-in modules
are needed for the
forward path
Triax’ newly developed
Automatic Link Pass
(ALP) automatically
establishes the forward
signal ensuring a linear
amplification in the entire
47-862 MHz range. No
plug-in link modules are
needed for forward path,
only for the return path.
Passive or active return
path - you decide when
and how
When the return path is to be
used, it is simply done by mounting
Diplex plug-in modules on input
and output. The type of module
inserted determines, whether the
return path range is 5-30 MHz, 5-55
MHz or 5-65 MHz, and whether it is
passive or active. The return path is
automatically established by the ALP
function.
Diplex plug-in modules
• with or without test point
• with a return path range
of 5-30, 5-55 or 5-65 MHz
Active plug-in return path amplifier
with 17 dB gain covering the whole
return path frequency range at
5-65 MHz is also available.
8
The passive return path is
established by inserting two Diplex
plug-in modules.
The active return path is quickly
established, simply by inserting
a plug-in return path amplifier.
The active frequency range is
determined by the Diplex modules.
Quality housing
ensures long life
The aluminium die-cast housing of
the amplifier offers high mechanical
stability and ensures a high shielding
factor. Aluminium dissipates the
heat much better than comparative
materials. This results in a
constant value and a long
product life. The HFA
housing complies with
the IP65 requirements
for efficient dust and
water protection.
Quality
The installation of the amplifier can
either be left/right or top/bottom.
All mounting accessories are
delivered with the amplifier.
Efficient
switch mode
power supply
adds to reliability
The switch mode power supply has
a high efficiency that minimizes heat
generation and power consumption.
The excellent transient and surge
protection combined with the low
operating temperature all contribute
to increase and ensure a long lifetime
of the amplifier. An LED indicator
shows whether the power supply is
working correctly.
9
L ow-cost trouble solving
IFA Distribution Amplifiers
At the subscriber end of almost any
community network, the installer will
need handy and reliable broadband
amplifiers to provide signals of
sufficient strength to, for example, a
distant block of flats or to subscribers
wanting outlets in more than one
room.
From both a technical and economical
point of view Triax IFA amplifiers
are ideal for this kind of installation.
Relative to their high performance
and effective shielding, they are
inexpensive and quick to mount
anywhere indoors.
A wide range of solutions
IFA amplifiers are available with 1
or 2 outputs and in 20 dB as well as
30 dB gain variants, all provided with
variable attenuator. Moreover, some
types have 5-7 dB fixed tilt, others are
provided with variable tilt to equalize
the uneven attenuation of the low and
the high frequencies of the cable.
“Click-on” bracket saves
installation time
When the amplifier is to be mounted
on a wall or rafter, the rear grey/white
bracket is screwed on, cables with
F-connectors are screwed on to the
amplifier, which can now be clicked on
to the rearmounting bracket.
In case of subsequent changes to
the cables, the amplifier is easily
demounted by pressing down the
small ratchet and then pulling the
amplifier loose from the rearmounting
bracket.
Integrated return path
for support of interactive
services
All amplifiers in the IFA-series have
an integrated passive return path to
the frequency ranges
5-30, 5-55 or 5-65 MHz.
If or when the network
has to be used for
interactive services
such as fast Internet
connections, interactive
TV or cable telephony,
IFA amplifiers will thus
support these interactive
applications.
High output voltage and
transient protection
IFA amplifiers have a very high
output voltage of 116 dBµV or 2 x
112 dBµV (EN 50083-3). This makes
them suitable for aerial systems with
many channels. They are transient
protected up to 4 kV on all inputs and
outputs.
IFA 203 Amplifier
with 2 outputs and
gain adjustment
10
IFA 231 Amplifier
with 1 output,
equalizer and gain
adjustment
IFA 236 Amplifier
with 2 outputs,
equalizer and gain
adjustment
IFA 205 Amplifier
with 1 output,
equalizer and gain
adjustment
Design and installation
Flexibility
With a modern and elegant design,
IFA Distribution Amplifiers are suitable
for mounting even inside homes and
in situations, where the installation
cannot be hidden away in a loft or
under a staircase.
11
C3 High output
Trunk Line
Amplifiers
Technical Data - Mains powered
TYPE
C3
S250
C3
SC360
C3
SC300
C3
SG400
Part No.
321250
321360
321300
321400
47, 73 or 86 - 860
(depending on filter)
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
25
36
31
41
Forward Path
Frequency range
MHz
Gain switchable - pos. 1
dB
dB
Noise figure
dB
7.5
7.5
7.5
7.5
Linearity
dB
± 0.5 2)
± 0.5 2)
± 0.5 2)
± 0.5 2)
Attenuation
dB
0 - 20
0 - 20
0 - 20
0 - 20
Equalization
dB
depending on module
depending on module
depending on module
depending on module
Output level @ 450 MHz
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
IM3 - 52 dB 3 carrier
dBµV
dBµV
dBµV
dBµV
dBµV
124
117
112
112
122
124
117
112
112
122
128
119
117
118
128
119
117
118
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
123
117
109
119
121
123
117
109
119
121
128
119
114
115
128
119
114
115
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
122
115
107
107
120
122
115
107
107
120
126
118
112
113
126
118
112
113
Return loss (-1.5 dB/Octave)
dB
Output stage
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
Power Doubling
Power Doubling
GaAs-FET
GaAs-FET
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
-10..0/2..12/14..24
Return path
Frequency range
MHz
Gain (adjustable)
dB
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
Noise figure
dB
6.0 2)
6.0 2)
6.0 2)
6.0 2)
Attenuation
dB
0 - 10
0 - 10
0 - 10
0 - 10
Equalization
dB
depending on module
depending on module
depending on module
depending on module
Main supply
Main supply
Main supply
Main supply
180 - 255
180 - 255
180 - 255
180 - 255
W
13
13
13
13
A
7
7
7
7
IP66
IP66
IP66
IP66
PG11
(5/8” on request)
PG11
(5/8” on request)
PG11
(5/8” on request)
PG11
(5/8” on request)
General
Power supply type
Power supply
V/AC
Power consumption
Current-transit
3)
Housing - Protection class
Connectors
Certification
Impedance
Operation temperature range
Weight
75
75
75
75
0
-20....+55
-20....+55
-20....+55
-20....+55
C
kg
Dimensions (H x D x W)
1)
2)
3)
Ohm
mm
2.5
2.5
2.5
2.5
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
DIN/EN 50083 Part 3 CTBA (Composite triple beat ratio) @ 60 dB IMR, CENELEC-raster 42 channels
Values apply to use with return-path module VRA 365
Hum modulation ratio >65 dB
C3 - S250
C3 - S360
12
C3 - SG300
C3 - SG400
C3 High output
Trunk Line
Amplifiers
Technical Data - Line powered
TYPE
C3
T251
C3
T361
C3
TG301
C3
SG401
Part No.
321251
321361
321301
321401
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
25
36
31
41
Forward Path
Frequency range
MHz
dB
Noise figure
dB
7.5
7.5
7.5
7.5
Linearity
dB
± 0.5 2)
± 0.5 2)
± 0.5 2)
± 0.5 2)
Attenuation
dB
0 - 20
0 - 20
0 - 20
0 - 20
Equalization
dB
depending on module
depending on module
depending on module
depending on module
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
124
117
112
112
122
124
117
112
112
122
128
119
117
118
128
119
117
118
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
123
117
109
119
121
123
117
109
119
121
128
119
114
115
128
119
114
115
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
122
115
107
107
120
122
115
107
107
120
126
118
112
113
126
118
112
113
dB
Output stage
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
Power Doubling
Power Doubling
GaAs-FET
GaAs-FET
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
-10..0/2..12/14..24
Return path
Frequency range
MHz
Gain (adjustable)
dB
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
Noise figure
dB
6.0 2)
6.0 2)
6.0 2)
6.0 2)
Attenuation
dB
0 - 10
0 - 10
0 - 10
0 - 10
Equalization
dB
depending on module
depending on module
depending on module
depending on module
Line supply
General
Power supply type
Power supply
Power consumption
Current-transit
Line supply
Line supply
Line supply
V/AC
24 - 70
24 - 70
24 - 70
24 - 70
W
13 - 14
13 - 14
13 - 14
13 - 14
3)
A
Connectors
7
7
7
7
IP66
IP66
IP66
IP66
PG11
(5/8” on request)
PG11
(5/8” on request)
PG11
(5/8” on request)
PG11
(5/8” on request)
Certification
Impedance
Weight
75
75
75
75
0
-20....+55
-20....+55
-20....+55
-20....+55
C
kg
1)
2)
3)
Ohm
mm
2.5
2.5
2.5
2.5
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
C3 - T251
C3 - T361
C3 - TG301
13
C3 - SG401
C3 High output
Distribution
Amplifiers
TYPE
C3
SC500
C3
SC600
C3
SG180
C3
SCG700
Part No.
321500
321600
321180
321700
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
28
36
28
36
18
32
40
Forward Path
Frequency range
MHz
- pos. 2
dB
dB
Noise figure
dB
7.0
7.0
7.0
7.0
Linearity
dB
± 0.75 2)
± 0.75 2)
± 0.75 2)
± 0.75 2)
Attenuation
dB
0 - 20
0 - 20
0 - 20
0 - 20
Equalization
dB
depending on module
depending on module
depending on module
depending on module
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
120
115
110
111
118
124
117
112
112
122
128
119
117
118
128
119
117
118
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
120
115
107
108
118
123
117
109
109
121
128
119
114
115
128
119
114
115
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
119
111
105
106
117
122
115
107
107
120
126
118
112
113
126
118
112
113
dB
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
Push pull
Power Doubling
GaAs-FET
GaAs-FET
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
-10..0/2..12/14..24
Output stage
Return path
Frequency range
MHz
Gain (adjustable)
dB
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
Noise figure
dB
6.0 2)
6.0 2)
6.0 2)
6.0 2)
Attenuation
dB
0 - 10
0 - 10
0 - 10
0 - 10
Equalization
dB
depending on module
depending on module
depending on module
depending on module
Main supply
Main supply
Main supply
Main supply
180 - 255
180 - 255
180 - 255
180 - 255
W
10
14
14
14
A
-
-
-
-
IP66
IP66
IP66
IP66
3 x F-con
3 x F-con,
PG11 or 5/8”
PG11 or 5/8”
PG11 or 5/8”
General
Power supply type
Power supply
V/AC
Power consumption
Current-transit
3)
Connectors
Certification
Impedance
Weight
75
75
75
75
0
-20....+55
-20....+55
-20....+55
-20....+55
C
kg
1)
2)
3)
Ohm
mm
2.0
2.0
2.0
2.0
163 x 60 x 242
163 x 60 x 242
163 x 60 x 242
163 x 60 x 242
C3 - SC500
C3 - SC600
14
C3 - SG180
C3 - SCG700
C3 High output
Distribution
Amplifiers
TYPE
C3
TC501
C3
TC601
C3
TG181
C3
TCG701
Part No.
321501
321601
321181
321701
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
28
36
28
36
18
32
40
Forward Path
Frequency range
MHz
Gain switchable pos. 1
pos. 2
dB
dB
Noise figure
dB
7.0
7.0
7.0
7.0
Linearity
dB
± 0.75 2)
± 0.75 2)
± 0.75 2)
± 0.75 2)
Attenuation
dB
0 - 20
0 - 20
0 - 20
0 - 20
Equalization
dB
depending on module
depending on module
depending on module
depending on module
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
120
115
110
111
118
124
117
1112
112
122
128
119
117
118
128
119
117
118
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
120
115
107
108
118
123
117
109
109
121
128
119
114
115
128
119
114
115
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
119
111
105
106
117
122
115
107
107
120
126
118
112
113
126
118
112
113
Return loss (-1.5dB/Octave)
dB
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
Push pull
Power Doubling
GaAs-FET
GaAs-FET
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
-10..0/2..12/14..24
Output stage
Return path
Frequency range
MHz
Gain (adjustable)
dB
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
Noise figure
dB
6.0 2)
6.0 2)
6.0 2)
6.0 2)
Attenuation
dB
0 - 10
0 - 10
0 - 10
0 - 10
Equalization
dB
depending on module
depending on module
depending on module
depending on module
Line supply
Line supply
Line supply
Line supply
24 - 70
24 - 70
24 - 70
24 - 70
W
10
14
14
14
A
2.5
2.5
2.5
2.5
General
Power supply type
Power supply
V/AC
Power consumption
Current-transit
3)
Connectors
IP66
IP66
IP66
IP66
3 x F-con
3 x F-con,
PG11 or 5/8”
PG11 or 5/8”
PG11 or 5/8”
Certification
Impedance
Weight
75
75
75
75
0
-20....+55
-20....+55
-20....+55
-20....+55
C
kg
1)
2)
3)
Ohm
mm
2.0
2.0
2.0
2.0
163 x 60 x 242
163 x 60 x 242
163 x 60 x 242
163 x 60 x 242
C3 - TC501
C3 - TC601
C3 - TG181
15
C3 - SG701
C4 High output
Superbroadband
Distribution Amplifier
Technical Data - Mains and line supply
TYPE
C4
S250
C4
T251
C4
S360
Part No.
324250
324251
324360
321400
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
47, 73 or 86 - 860
Frequency range
MHz
C4
T361
Gain switchable
47 - 862 MHz
950 - 2400 MHz
dB
dB
25
40
25
40
36
40
36
40
Noise figure
47 - 862 MHz
950 - 2400 MHz
dB
dB
< 8.5
< 9.0
< 8.5
< 9.0
< 6.5
< 9.0
< 6.5
< 9.0
dB
± 0.5 2)
± 0.5 2)
± 0.5 2)
± 0.5 2)
Attenuation
47 - 862 MHz
950 - 2400 MHz
dB
dB
0 - 10
0 - 20
0 - 10
0 - 20
0 - 20
0 - 20
0 - 20
0 - 20
Equalization
47 - 862 MHz
950 - 2400 MHz
dB
dB
0 - 20
0 - 20
0 - 20
0 - 20
0 - 20
0 - 20
0 - 20
0 - 20
Linearity
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
124
117
112
112
122
124
117
112
112
122
124
117
112
112
122
124
117
112
112
122
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
123
117
109
109
121
123
117
109
109
121
123
117
109
109
121
123
117
109
109
121
60 dB IM3 (DIN 45004B)
60 dB IM2 (DIN 45004A1)
60 dB CTB 1)
60 dB CSO
dBµV
dBµV
dBµV
dBµV
dBµV
122
115
107
107
120
122
115
107
107
120
122
115
107
107
120
122
115
107
107
120
60 dB IM3 (DIN 45004B)
dBµV
dB
120
120
120
120
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
20 @ 40 MHz
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
Return path
Frequency range
MHz
Gain (adjustable) 5-65 MHz
dB
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
-10..0/2..12/14..24
Noise figure
5-65 MHz
dB
6.0 2)
6.0 2)
6.0 2)
6.0 2)
Attenuation
5-65 MHz
dB
0 - 10
0 - 10
0 - 10
0 - 10
Equalization
5-65 MHz
dB
1
1
1
1
Main supply
Line supply
Main supply
Line supply
180 - 255
24 - 70
180 - 255
24 - 70
16
16
16
16
General
Power supply type
Power supply
V/AC
Power consumption
Current-transit
W
3)
A
Connectors
7 (Hum modulation ratio 65 dB, f= 10 MHz)
7 (Hum modulation ratio 65 dB, f= 10 MHz)
IP66
IP66
IP66
IP66
4 x PG11
4 x PG11
4 x PG11
4 x PG11
Certification
Impedance
Weight
Ohm
75
75
75
75
0
-20....+55
-20....+55
-20....+55
-20....+55
C
kg
mm
2.5
2.5
2.5
2.5
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
163 x 90 x 242
1) DIN/EN 50083 Part 3 CTBA
(Composite triple beat ratio)
@ 60 dB IMR,
CENELEC-raster 42 channels
2) Values apply to use with
return-path module VRA 365
3) Hum modulation ratio >65 dB
C4 - S250
C4 - T251
16
C4 - S360
C4 - T361
Facts about
Plug-in modules for
C3 & C4 Amplifiers
Input modules for C4 amplifiers
Service module
TYPE
ECO 003
TYPE
Part No.
321003
Part No.
Frequency range
Input 1
Input 2
MHz
MHz
5 - 862
950 - 2400
Frequency range
Test point
VMS 1
321100
MHz
dB
4 - 65
- 20
Return-path modules passive/active
TYPE
VRP 035
VRA 465
VRA 355
Part No.
321035
321465
321355
4 - 30
4 - 55
4 - 65
-10 to 0
2 - 12
14 - 24
-
113
113
TYPE
FVR 030
FVR 055
FVR 065
Part No.
321030
321055
321065
4 - 30
4 - 55
4 - 65
0.5
0.5
0.5
Frequency range
Amplification
Output level (60 dB IMA)
MHz
dB
dBµV
Return-path filters
Frequency range
Through loss
MHz
dB
Adaptor for C3 & C4
Attenuators
TYPE
ATT 020
Part No.
321020
Frequency range
Through loss
MHz
4 - 862
dB
0 - 20
TYPE
Dimension
Weight
TYPE
EVR 130
EVR 155
EVR 165
Part No.
321130
321155
321165
MHz
4 - 30
4 - 55
4 - 65
Equalization
dB
0 - 10
0 - 10
0 - 10
Basic attenuation
dB
-1
-1
-1
Output modules 4 - 862 MHz
TYPE
VMM 20
SDE 004
SDE 007
SDE 014
Part No.
321002
321004
321007
321014
Test socket
Splitter
Tap
Tap
Version
Output 1
dB
- 0.5
- 4.0
- 2.0
- 1.0
Output 2
dB
- 20.0
- 4.0
- 7.0
- 14.0
17
153580
mm
kg
Variable return-path equalizers
Frequency range
PG11 - Ff
Part No.
HEX 20 x 72.5
0.046
Facts about
Plug-in modules for
C3 & C4 Amplifiers
Variable equalizers
TYPE
EGA 101
EGA 201
Part No.
321101
321201
MHz
4 - 862
4 - 862
Equalization @ 47 MHz
dB
0 - 10
0 - 20
Basic attenuation
dB
-1.0
-1.0
TYPE
EGA 006
EGA 012
Part No.
321006
321012
4 - 862
4 - 862
Frequency range
Fixed equalizers
Frequency range
MHz
dB
6.0
12.0
Basic attenuation
dB
-1.0
-1.0
Fixed return-path equalizers
TYPE
VMR 3-6
VMR 3-9
VMR 3-12
Part No.
321131
321132
321133
4 - 30
4 - 30
4 - 30
Frequency range
MHz
dB
6.0
9.0
12.0
Basic attenuation
dB
-1.0
-1.0
-1.0
TYPE
VMR 5-6
VMR 5-9
VMR 5-12
Part No.
321156
321157
321158
4 - 55
4 - 55
4 - 55
Frequency range
MHz
dB
6.0
9.0
12.0
Basic attenuation
dB
-1.0
-1.0
-1.0
TYPE
VMR 6-6
VMR 6-9
VMR 6-12
Part No.
321166
321167
321168
4 - 65
4 - 65
4 - 65
Frequency range
MHz
Equalization
dB
6.0
9.0
12.0
Basic attenuation
dB
-1.0
-1.0
-1.0
18
Facts about
HFA Distribution
Amplifiers
TYPE
HFA 602
HFA 603
HFA 604
Part No.
324602
324603
324604
Forward Path
Frequency range
MHz
47, 73 or 87 - 862
47, 73 or 87 - 862
47, 73 or 87 - 862
(depending on module) (depending on module) (depending on module)
Gain adjustable
dB
22
30
40
Attenuation
dB
0 - 20
0 - 20
0 - 20
Noise figure
dB
< 8.5 (Typical 7.5)
< 7.5 (Typical 6.5)
< 7.0 (Typical 6.0)
Linearity
dB
± 1.0
± 1.0
± 1.0
Equalization
dB
0 - 18
0 - 18
0 - 18
118
112
101
101
118
112
101
101
118
112
101
101
Output level
60 dB 3 order (DIN 45004B)
60 dB 3 order (DIN 45004A1)
60 dB CTB 1)
60 dB CSO 1)
Return loss input
dBµV
dBµV
dBµV
dBµV
HFA 602
(-1.5 dB/Octave)
dB
>14 @ 40 MHz (Min. 10) >14 @ 40 MHz (Min. 10) >14 @ 40 MHz (Min. 10)
Return loss output (-1.5 dB/Octave)
dB
MHz
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
Return path
Frequency range
Gain (adjustable)
dB
Linearity
dB
Return loss input
passive -1.0/active 17.0
± 1.0
± 1.0
± 1.0
(-1.5 dB/Octave)
dB
> 14 @5 MHz to 65 MHz > 14 @5 MHz to 65 MHz > 14 @5 MHz to 65 MHz
dB
HFA 603
General
Power supply type
Power supply
V/AC
Mains powered
Mains powered
Mains powered
230 ± 10%
230 ± 10%
230 ± 10%
Power consumption
W
7.5
7.5
7.5
Shielding Efficiency VHF
dB
100
100
100
Shielding Efficiency UHF
dB
Connectors
90
90
90
IP65
IP65
IP65
F-connectors
F-connectors
F-connectors
Certification
Impedance
Ohm
75
75
75
0
C
0...+55
0...+55
0...+55
Weight
kg
1.325
1.325
1.325
145 x 70 x 170
145 x 70 x 170
145 x 70 x 170
mm
HFA 604
1) DIN/EN 50083 Part 3 CTBA (Composite trible beat ratio) @ 60 dB IMR, CENELEC-raster 42 channels
Diplex filter modules
TYPE
MD 3047
MD 3047T
MD 5573
MD 5573T
Part No.
324681
324682
324685
324686
Frequency range (return path)
MHz
5 - 30
5 - 30
5 - 55
5 - 55
Frequency range (forward path)
MHz
47 - 862
47 - 862
73 - 862
73 - 862
dB
-
- 20
-
- 20
pcs.
2
2
2
2
Testpoint
Packing size
19
Facts about
HFA Distribution
Amplifiers
TYPE
HFA 622L
HFA 623L
HFA 624 L
Part No.
324622
324623
324624
Forward Path
Frequency range
MHz
Gain adjustable
dB
22
30
40
Attenuation
dB
0 - 20
0 - 20
0 - 20
Noise figure
dB
< 8.5 (Typical 7.5)
< 7.5 (Typical 6.5)
< 7.0 (Typical 6.0)
Linearity
dB
± 1.0
± 1.0
± 1.0
Equalization
dB
0 - 18
0 - 18
0 - 18
118
112
101
101
118
112
101
101
118
112
101
101
Output level
60 dB CTB 1)
60 dB CSO 1)
HFA 622L
47, 73 or 87 - 862
47, 73 or 87 - 862
47, 73 or 87 - 862
Return loss input
dBµV
dBµV
dBµV
dBµV
(-1.5 dB/Octave)
dB
dB
MHz
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
5-30, 5-55 or 5-65
Return path
Frequency range
Gain
dB
Linearity
dB
Return loss input
HFA 623L
passive -1.0/active 17.0
± 1.0
± 1.0
± 1.0
(-1.5 dB/Octave)
dB
dB
General
Power supply type
Power supply
Line supply
Line supply
Line supply
24 - 60
24 - 60
24 - 60
V/AC
Power consumption
W
7.5
7.5
7.5
dB
100
100
100
dB
90
90
90
IP65
IP65
IP65
F-connectors
F-connectors
F-connectors
Connectors
Certification
Impedance
75
75
75
0
0...+55
0...+55
0...+55
C
Weight
kg
HFA 624L
Ohm
mm
1.325
1.325
1.325
145 x 70 x 170
145 x 70 x 170
145 x 70 x 170
Diplex filter modules
Return-path amplifier
TYPE
MD 6587
MD 6587T
TYPE
Part No.
324683
324684
Part No.
Frequency range (return path)
MHz
5 - 65
5 - 65
Frequency range (forward path)
MHz
87 - 862
87 - 862
-
- 20
Testpoint
dB
MHz
Gain
MHz
17
dB
20
TRP
TYPE
Part No.
416014
Part No.
Max. current
Dimensions (Height x Diameter)
5 - 65
Power inserter with F-con
TYPE
Power supply
324617
Frequency range
Attenuation
Line power supply
MA 617
V/AC
A
mm
48
Frequency range
1.25
20
347001
MHz
5 - 2400
dB
dB
≤ 0.5
≤ 1.5
Max. current
A
2.5
Power
V
65
Through loss 5-862 MHz
1000-2150 MHz
60 x 100
TPI - 01
Facts about
IFA Distribution
Amplifiers
Technical Data
TYPE
IFA 201
IFA 202
IFA 203
IFA 205
IFA 206
Part No.
339201
339202
339203
339205
339206
Forward Path
47 - 862
47 - 862
73 - 862
87 - 862
87 - 862
Gain @47 or 87 MHz/@862 MHz
Frequency range
dB
2...22
-4...15/1...20
-5...13/0...18
-3...17/2...22
-7...13/2...18
Noise figure
dB
< 5 (typical 4.5)
< 5 (typical 4.5)
< 6.5 (typical 5.5)
< 8.5 (typical 7.5)
< 8.5 (typical 7.5)
Linearity
dB
± 1.0
± 1.0
± 1.0
± 1.0
± 1.0
Slope
dB
5.0
5.0
5
5.0
Equalizer
dB
0 - 18
0 - 18
Outputs
Output level
60 dB CTB 1)
60 dB CSO 1)
MHz
pcs
dBµV
dBµV
dBµV
dBµV
dB
1
2
2
1
2
116.0
102.0
99.5
96.5
2 x 112.0
2 x 97.0
2 x 95.5
2 x 92.5
2 x 112.0
2 x 97.0
2 x 95.5
2 x 92.5
116.0
104.0
98.5
96.5
2 x 112.0
2 x 100.0
2 x 95.5
2 x 92.5
> 14 @47 MHz
> 14 @47 MHz
> 14 @73 MHz
> 14 @87 MHz
> 14 @87 MHz
5 - 30
5 - 30
5 - 55
5 - 65
5 - 65
0.5
4.0
4.0
1.0
4.0
Return path
Frequency range
Through loss
MHz
dB
General
Power supply
230 ± 10%
230 ± 10%
230 ± 10%
230 ± 10%
230 ± 10%
Power consumption
V/DC
W
6.5
6.5
6.5
6.5
6.5
dB
65
65
65
65
65
dB
75
F-connector
75
F-connector
75
F-connector
75
F-connector
75
F-connector
Connectors
Certification
Impedance
Weight
Ohm
75
75
75
75
75
0
0...+50
0...+50
0...+50
0...+50
0...+50
C
kg
mm
0.475
0.475
0.475
0.475
0.475
65 x 50 x 175
65 x 50 x 175
65 x 50 x 175
65 x 50 x 175
65 x 50 x 175
21
Facts about
IFA Distribution
Amplifiers
Technical Data
TYPE
IFA 210
IFA 211
IFA 231
IFA 232
IFA 235
IFA 236
Part No.
339210
339211
339231
339232
339235
339236
Forward Path
Frequency range
47 - 862
47 - 862
47 - 862
47 - 862
87 - 862
87 - 862
Gain @47 or 87 MHz/@862 MHz
dB
0...20
0...20
-5...25/12...32
1...21/8...28
5...25/12...32
1...21/8...28
Noise figure
dB
< 5.0 (typical 4.5)
< 5.0 (typical 4.5)
< 6.5 (typical 6.0)
< 6.5 (typical 6.0)
< 7.0 (typical 6.5)
< 7.0 (typical 6.5)
Linearity
dB
± 1.0
± 1.0
± 1.0
± 1.0
± 1.0
± 1.0
Slope
dB
7.0
7.0
7.0
5
Equalizer
dB
0 - 18
0 - 18
0 - 18
0 - 18
Outputs
Output level
60 dB CTB 1)
60 dB CSO 1)
MHz
pcs
dBµV
dBµV
dBµV
dBµV
dB
1
1
1
2
1
2
112.0
104.0
94.5
90.5
112.0
104.0
94.5
90.5
116.0
104.0
97.5
93.5
2 x 112.0
2 x 100.0
2 x 93.5
2 x 89.5
116.0
104.0
97.5
93.5
2 x 112.0
2 x 100.0
2 x 94.5
2 x 90.5
> 14 @47 MHz
> 14 @47 MHz
> 14 @47 MHz
> 14 @47 MHz
> 14 @87 MHz
> 14 @87 MHz
5 - 30
5 - 65
5 - 30
5 - 30
5 - 65
5 - 65
1.0
1.0
1.5
5.5
1.0
4.5
Return path
Frequency range
Through loss
MHz
dB
General
Power supply
230 ± 10%
230 ± 10%
230 ± 10%
230 ± 10%
230 ± 10%
230 ± 10%
Power consumption
V/DC
W
3.0
3.0
6.5
6.5
6.5
6.5
dB
65
65
65
65
65
65
dB
75
F-connector
75
F-connector
75
F-connector
75
F-connector
75
F-connector
75
F-connector
Connectors
Certification
Impedance
Weight
Ohm
75
75
75
75
75
75
0
0...+50
0...+50
0...+50
0...+50
0...+50
0...+50
C
kg
mm
0.400
0.400
0.475
0.475
0.475
0.475
61 x 44 x 118
61 x 44 x 118
65 x 50 x 175
65 x 50 x 175
65 x 50 x 175
65 x 50 x 175
22
Facts about
ACB/ATB Sat IF
Technical Data
TYPE
ACB 280
ATB 2200
Part No.
324280
300571
10 - 862
950 - 2150
86 - 862
950 - 2150
Forward Path
Frequency range Terrestrial
Satellite
MHz
MHz
Gain
Terrestrial
Satellite
dB
dB
- 2.0
21...28
20...28
20...28
Noise figure
Terrestrial
Satellite
dB
dB
< 8.0
< 5.0
< 10.0
dB
± 1.0
± 1.0
0 - 10
0 - 12
0 - 10
Linearity
Attenuation
Terrestrial
Satellite
dB
dB
Equalizer
Terrestrial
Satellite
dB
dB
Inputs / Outputs
pcs
Output level
Terrestrisk
Sat - IM3-35
dBµV
dBµV
Isolation SAT/TV
TV/SAT
dB
dB
dB
-8.0 (fixed)
-8.0 (fixed)
2/1
1/1
116.0
116.0
116.0
> 14 @47 MHz
> 14 @ 86 MHz
Return path
Frequency range
Through loss
MHz
4 - 65
dB
1.5
General
Power supply
Power consumption
V/AC
V/DC
230 ± 10%
12
230 ± 10%
24
mA
Connectors
250 (v. 15V)
F-female
F-female
Certification
Impedance
Weight
ohm
75
75
0
0...+50
0...+50
C
kg
mm
1.4
1.4
100 x 62 x 185
100 x 68 x 187
1) DIN/EN 50083 Part 3 CTBA (Composite triple beat ratio) @ 60 dB IMR, CENELEC-raster 42 channels
23
Thinking one
step ahead...
Triax philosophy is customerorientation: In both our markets,
TV-systems and enclosures,
our objective is to save time and
trouble for the installers, operators
and distributors building their
business on our products.
Simplicity and support are key
words, expressed both in products
and in service.
Our products offer more in
performance and simplifying logic,
and in our support customers have
easy access to understandable,
useful and competent answers.
Innovative thinking, serviceoriented people and advanced
technology has made Triax one
of the leading European suppliers
of both TV-systems and
enclosures.
AB.52.3.02
TRIAX A/S
Bjørnkærvej 3
DK - 8783 Hornsyld
Tel.: +45 76 82 22 00
Fax: +45 75 68 79 66
mail: [email protected]
www.triax.com
Tri
We offer everything that can be
expected from a professional
supplier within these fields.
Triax is of course ISO 9001
certified and delivers products
according to all acknowledged
local and international quality
standards.

Triax Distribution Amplifiers [2005] 1.indd

Transcription

Similar documents

Ecoline TE16 UK - Reo-Pack

Price list 2014-2015 FLEXA White